Commit aa92c1cec9 ("l2tp: add tunnel/session get_next helpers") uses
idr_get_next APIs to iterate over l2tp session IDR lists. Sessions in
l2tp_v2_session_idr always have a non-null session->tunnel pointer
since l2tp_session_register sets it before inserting the session into
the IDR. Therefore the null check on session->tunnel in
l2tp_v2_session_get_next is redundant and can be removed. Removing the
check avoids a warning from lkp.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/r/202408111407.HtON8jqa-lkp@intel.com/
CC: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: James Chapman <jchapman@katalix.com>
Acked-by: Tom Parkin <tparkin@katalix.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240903113547.1261048-1-jchapman@katalix.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
NETIF_F_LLTX can't be changed via Ethtool and is not a feature,
rather an attribute, very similar to IFF_NO_QUEUE (and hot).
Free one netdev_features_t bit and make it a "hot" private flag.
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Recent commit fc7ec7f554 ("l2tp: delete sessions using work queue")
incorrectly uses drain_workqueue. The use of drain_workqueue in
l2tp_pre_exit_net is flawed because the workqueue is shared by all
nets and it is therefore possible for new work items to be queued
for other nets while drain_workqueue runs.
Instead of using drain_workqueue, use __flush_workqueue twice. The
first one will run all tunnel delete work items and any work already
queued. When tunnel delete work items are run, they may queue
new session delete work items, which the second __flush_workqueue will
run.
In l2tp_exit_net, warn if any of the net's idr lists are not empty.
Fixes: fc7ec7f554 ("l2tp: delete sessions using work queue")
Signed-off-by: James Chapman <jchapman@katalix.com>
Link: https://patch.msgid.link/20240823142257.692667-1-jchapman@katalix.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Although commit 4a4cd70369 ("l2tp: don't set sk_user_data in tunnel socket")
removed sk->sk_user_data usage, setup_udp_tunnel_sock() still touches
sk->sk_user_data, this conflicts with sockmap which also leverages
sk->sk_user_data to save psock.
Restore this sk->sk_user_data check to avoid such conflicts.
Fixes: 4a4cd70369 ("l2tp: don't set sk_user_data in tunnel socket")
Reported-by: syzbot+8dbe3133b840c470da0e@syzkaller.appspotmail.com
Cc: Tom Parkin <tparkin@katalix.com>
Signed-off-by: Cong Wang <cong.wang@bytedance.com>
Tested-by: James Chapman <jchapman@katalix.com>
Reviewed-by: James Chapman <jchapman@katalix.com>
Link: https://patch.msgid.link/20240822182544.378169-1-xiyou.wangcong@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Recent commit ed8ebee6de ("l2tp: have l2tp_ip_destroy_sock use
ip_flush_pending_frames") was incorrect in that l2tp_ip does not use
socket cork and ip_flush_pending_frames is for sockets that do. Use
__skb_queue_purge instead and remove the unnecessary lock.
Also unexport ip_flush_pending_frames since it was originally exported
in commit 4ff8863419 ("ipv4: export ip_flush_pending_frames") for
l2tp and is not used by other modules.
Suggested-by: xiyou.wangcong@gmail.com
Signed-off-by: James Chapman <jchapman@katalix.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20240819143333.3204957-1-jchapman@katalix.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
syzbot exposes a race where a net used by l2tp is removed while an
existing pppol2tp socket is closed. In l2tp_pre_exit_net, l2tp queues
TUNNEL_DELETE work items to close each tunnel in the net. When these
are run, new SESSION_DELETE work items are queued to delete each
session in the tunnel. This all happens in drain_workqueue. However,
drain_workqueue allows only new work items if they are queued by other
work items which are already in the queue. If pppol2tp_release runs
after drain_workqueue has started, it may queue a SESSION_DELETE work
item, which results in the warning below in drain_workqueue.
Address this by flushing the workqueue before drain_workqueue such
that all queued TUNNEL_DELETE work items run before drain_workqueue is
started. This will queue SESSION_DELETE work items for each session in
the tunnel, hence pppol2tp_release or other API requests won't queue
SESSION_DELETE requests once drain_workqueue is started.
WARNING: CPU: 1 PID: 5467 at kernel/workqueue.c:2259 __queue_work+0xcd3/0xf50 kernel/workqueue.c:2258
Modules linked in:
CPU: 1 UID: 0 PID: 5467 Comm: syz.3.43 Not tainted 6.11.0-rc1-syzkaller-00247-g3608d6aca5e7 #0
Hardware name: Google Compute Engine/Google Compute Engine, BIOS Google 06/27/2024
RIP: 0010:__queue_work+0xcd3/0xf50 kernel/workqueue.c:2258
Code: ff e8 11 84 36 00 90 0f 0b 90 e9 1e fd ff ff e8 03 84 36 00 eb 13 e8 fc 83 36 00 eb 0c e8 f5 83 36 00 eb 05 e8 ee 83 36 00 90 <0f> 0b 90 48 83 c4 60 5b 41 5c 41 5d 41 5e 41 5f 5d c3 cc cc cc cc
RSP: 0018:ffffc90004607b48 EFLAGS: 00010093
RAX: ffffffff815ce274 RBX: ffff8880661fda00 RCX: ffff8880661fda00
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000
RBP: 0000000000000000 R08: ffffffff815cd6d4 R09: 0000000000000000
R10: ffffc90004607c20 R11: fffff520008c0f85 R12: ffff88802ac33800
R13: ffff88802ac339c0 R14: dffffc0000000000 R15: 0000000000000008
FS: 00005555713eb500(0000) GS:ffff8880b9300000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000008 CR3: 000000001eda6000 CR4: 00000000003506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
queue_work_on+0x1c2/0x380 kernel/workqueue.c:2392
pppol2tp_release+0x163/0x230 net/l2tp/l2tp_ppp.c:445
__sock_release net/socket.c:659 [inline]
sock_close+0xbc/0x240 net/socket.c:1421
__fput+0x24a/0x8a0 fs/file_table.c:422
task_work_run+0x24f/0x310 kernel/task_work.c:228
resume_user_mode_work include/linux/resume_user_mode.h:50 [inline]
exit_to_user_mode_loop kernel/entry/common.c:114 [inline]
exit_to_user_mode_prepare include/linux/entry-common.h:328 [inline]
__syscall_exit_to_user_mode_work kernel/entry/common.c:207 [inline]
syscall_exit_to_user_mode+0x168/0x370 kernel/entry/common.c:218
do_syscall_64+0x100/0x230 arch/x86/entry/common.c:89
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7f061e9779f9
Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 a8 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007ffff1c1fce8 EFLAGS: 00000246 ORIG_RAX: 00000000000001b4
RAX: 0000000000000000 RBX: 000000000001017d RCX: 00007f061e9779f9
RDX: 0000000000000000 RSI: 000000000000001e RDI: 0000000000000003
RBP: 00007ffff1c1fdc0 R08: 0000000000000001 R09: 00007ffff1c1ffcf
R10: 00007f061e800000 R11: 0000000000000246 R12: 0000000000000032
R13: 00007ffff1c1fde0 R14: 00007ffff1c1fe00 R15: ffffffffffffffff
</TASK>
Fixes: fc7ec7f554 ("l2tp: delete sessions using work queue")
Reported-by: syzbot+0e85b10481d2f5478053@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=0e85b10481d2f5478053
Signed-off-by: James Chapman <jchapman@katalix.com>
Signed-off-by: Tom Parkin <tparkin@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
l2tp_eth uses old-style dev->stats for fastpath packet/byte
counters. Convert it to use dev->tstats per-cpu counters.
Signed-off-by: James Chapman <jchapman@katalix.com>
Signed-off-by: Tom Parkin <tparkin@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
l2tp_tunnel_inc_refcount and l2tp_session_inc_refcount wrap
refcount_inc. They add no value so just use the refcount APIs directly
and drop l2tp's helpers. l2tp already uses refcount_inc_not_zero
anyway.
Rename l2tp_tunnel_dec_refcount and l2tp_session_dec_refcount to
l2tp_tunnel_put and l2tp_session_put to better match their use pairing
various _get getters.
Signed-off-by: James Chapman <jchapman@katalix.com>
Signed-off-by: Tom Parkin <tparkin@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
l2tp netlink and procfs/debugfs iterate over tunnel and session lists
to obtain data. They currently use very inefficient get_nth functions
to do so. Replace these with get_next.
For netlink, use nl cb->ctx[] for passing state instead of the
obsolete cb->args[].
l2tp_tunnel_get_nth and l2tp_session_get_nth are no longer used so
they can be removed.
Signed-off-by: James Chapman <jchapman@katalix.com>
Signed-off-by: Tom Parkin <tparkin@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
l2tp management APIs and procfs/debugfs iterate over l2tp tunnel and
session lists. Since these lists are now implemented using IDR, we can
use IDR get_next APIs to iterate them. Add tunnel/session get_next
functions to do so.
The session get_next functions get the next session in a given tunnel
and need to account for l2tpv2 and l2tpv3 differences:
* l2tpv2 sessions are keyed by tunnel ID / session ID. Iteration for
a given tunnel ID, TID, can therefore start with a key given by
TID/0 and finish when the next entry's tunnel ID is not TID. This
is possible only because the tunnel ID part of the key is the upper
16 bits and the session ID part the lower 16 bits; when idr_next
increments the key value, it therefore finds the next sessions of
the current tunnel before those of the next tunnel. Entries with
session ID 0 are always skipped because they are used internally by
pppol2tp.
* l2tpv3 sessions are keyed by session ID. Iteration starts at the
first IDR entry and skips entries where the tunnel does not
match. Iteration must also consider session ID collisions and walk
the list of colliding sessions (if any) for one which matches the
supplied tunnel.
Signed-off-by: James Chapman <jchapman@katalix.com>
Signed-off-by: Tom Parkin <tparkin@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
To handle colliding l2tpv3 session IDs, l2tp_v3_session_get searches a
hashed list keyed by ID and sk. Although unlikely, if hash keys
collide, it is possible that hash_for_each_possible loops over a
session which doesn't have the ID that we are searching for. So check
for session ID match when looping over possible hash key matches.
Signed-off-by: James Chapman <jchapman@katalix.com>
Signed-off-by: Tom Parkin <tparkin@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
l2tp_ip[6] have always used global socket tables. It is therefore not
possible to create l2tpip sockets in different namespaces with the
same socket address.
To support this, move l2tpip socket tables to pernet data.
Signed-off-by: James Chapman <jchapman@katalix.com>
Signed-off-by: Tom Parkin <tparkin@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Update l2tp to remove the inline keyword from several functions in C
sources, since this is now discouraged.
Signed-off-by: James Chapman <jchapman@katalix.com>
Signed-off-by: Tom Parkin <tparkin@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit fd558d186d ("l2tp: Split pppol2tp patch into separate l2tp and
ppp parts") converted net->gen->ptr[pppol2tp_net_id] in l2tp_ppp.c to
net->gen->ptr[l2tp_net_id] in l2tp_core.c.
Now the leftover wastes one entry of net->gen->ptr[] in each netns.
Let's avoid the unwanted allocation.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: James Chapman <jchapman@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Move the work of closing all tunnels from the pernet exit hook to
pre_exit since the core does rcu synchronisation between these steps
and we can therefore remove rcu_barrier from l2tp code.
Signed-off-by: James Chapman <jchapman@katalix.com>
Signed-off-by: Tom Parkin <tparkin@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
l2tp eth/ppp pseudowire setup/cleanup uses kfree() in some error
paths. Drop the refcount instead such that the session object is
always freed when the refcount reaches 0.
Signed-off-by: James Chapman <jchapman@katalix.com>
Signed-off-by: Tom Parkin <tparkin@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
l2tp_session_register uses an idr_alloc then idr_replace pattern to
insert sessions into the session IDR. To catch invalid locking, add a
WARN_ON_ONCE if the IDR entry is modified by another thread between
alloc and replace steps.
Also add comments to make expectations clear.
Signed-off-by: James Chapman <jchapman@katalix.com>
Signed-off-by: Tom Parkin <tparkin@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
l2tp_v3_session_htable and tunnel->session_list are read by lockless
getters using RCU. Use rcu list variants when adding or removing list
items.
Signed-off-by: James Chapman <jchapman@katalix.com>
Signed-off-by: Tom Parkin <tparkin@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When a session is created, it sets a backpointer to its tunnel. When
the session refcount drops to 0, l2tp_session_free drops the tunnel
refcount if session->tunnel is non-NULL. However, session->tunnel is
set in l2tp_session_create, before the tunnel refcount is incremented
by l2tp_session_register, which leaves a small window where
session->tunnel is non-NULL when the tunnel refcount hasn't been
bumped.
Moving the assignment to l2tp_session_register is trivial but
l2tp_session_create calls l2tp_session_set_header_len which uses
session->tunnel to get the tunnel's encap. Add an encap arg to
l2tp_session_set_header_len to avoid using session->tunnel.
If l2tpv3 sessions have colliding IDs, it is possible for
l2tp_v3_session_get to race with l2tp_session_register and fetch a
session which doesn't yet have session->tunnel set. Add a check for
this case.
Signed-off-by: James Chapman <jchapman@katalix.com>
Signed-off-by: Tom Parkin <tparkin@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Each l2tp ppp session has an associated pppox socket. l2tp_ppp uses
the session's pppox socket refcount to manage session lifetimes; the
pppox socket holds a ref on the session which is dropped by the socket
destructor. This complicates session cleanup.
Given l2tp sessions are refcounted, it makes more sense to reverse
this relationship such that the session keeps the socket alive, not
the other way around. So refactor l2tp_ppp to have the session hold a
ref on its socket while it references it. When the session is closed,
it drops its socket ref when it detaches from its socket. If the
socket is closed first, it initiates the closing of its session, if
one is attached. The socket/session can then be freed asynchronously
when their refcounts drop to 0.
Use the session's session_close callback to detach the pppox socket
since this will be done on the work queue together with the rest of
the session cleanup via l2tp_session_delete.
Also, since l2tp_ppp uses the pppox socket's sk_user_data, use the rcu
sk_user_data access helpers when accessing it and set the socket's
SOCK_RCU_FREE flag to have pppox sockets freed by rcu.
Signed-off-by: James Chapman <jchapman@katalix.com>
Signed-off-by: Tom Parkin <tparkin@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
l2tp sessions may be accessed under an rcu read lock. Have them freed
via rcu and remove the now unneeded synchronize_rcu when a session is
removed.
Signed-off-by: James Chapman <jchapman@katalix.com>
Signed-off-by: Tom Parkin <tparkin@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When a tunnel is closed, l2tp_tunnel_closeall closes all sessions in
the tunnel. Move the work of deleting each session to the work queue
so that sessions are deleted using the same codepath whether they are
closed by user API request or their parent tunnel is closing. This
also avoids the locking dance in l2tp_tunnel_closeall where the
tunnel's session list lock was unlocked and relocked in the loop.
In l2tp_exit_net, use drain_workqueue instead of flush_workqueue
because the processing of tunnel_delete work may queue session_delete
work items which must also be processed.
Signed-off-by: James Chapman <jchapman@katalix.com>
Signed-off-by: Tom Parkin <tparkin@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When the l2tp tunnel socket used sk_user_data to point to its
associated l2tp tunnel, socket and tunnel cleanup had to make use of
the socket's destructor to free the tunnel only when the socket could
no longer be accessed.
Now that sk_user_data is no longer used, we can simplify socket and
tunnel cleanup:
* If the tunnel closes first, it cleans up and drops its socket ref
when the tunnel refcount drops to zero. If its socket was provided
by userspace, the socket is closed and freed asynchronously, when
userspace closes it. If its socket is a kernel socket, the tunnel
closes the socket itself during cleanup and drops its socket ref
when the tunnel's refcount drops to zero.
* If the socket closes first, we initiate the closing of its
associated tunnel. For UDP sockets, this is via the socket's
encap_destroy hook. For L2TPIP sockets, this is via the socket's
destroy callback. The tunnel holds a socket ref while it
references the sock. When the tunnel is freed, it drops its socket
ref and the socket will be cleaned up when its own refcount drops
to zero, asynchronous to the tunnel free.
* The tunnel socket destructor is no longer needed since the tunnel
is no longer freed through the socket destructor.
Signed-off-by: James Chapman <jchapman@katalix.com>
Signed-off-by: Tom Parkin <tparkin@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since l2tp no longer derives tunnel pointers directly via
sk_user_data, it is no longer useful for l2tp to check tunnel pointers
using a magic feather. Drop the tunnel's magic field.
Signed-off-by: James Chapman <jchapman@katalix.com>
Signed-off-by: Tom Parkin <tparkin@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
l2tp no longer uses the tunnel socket's sk_user_data so drop the code
which sets it.
In l2tp_validate_socket use l2tp_sk_to_tunnel to check whether a given
socket is already attached to an l2tp tunnel since we can no longer
use non-null sk_user_data to indicate this.
Signed-off-by: James Chapman <jchapman@katalix.com>
Signed-off-by: Tom Parkin <tparkin@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
l2tp's ppp procfs output can be used to show internal state of
pppol2tp. It includes a 'user-data-ok' field, which is derived from
the tunnel socket's sk_user_data being non-NULL. Use tunnel->sock
being non-NULL to indicate this instead.
Signed-off-by: James Chapman <jchapman@katalix.com>
Signed-off-by: Tom Parkin <tparkin@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use the recently exported ip_flush_pending_frames instead of a
free-coded version and lock the socket while we call it.
Signed-off-by: James Chapman <jchapman@katalix.com>
Signed-off-by: Tom Parkin <tparkin@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
l2tp_sk_to_tunnel derives the tunnel from sk_user_data. Instead,
lookup the tunnel by walking the tunnel IDR for a tunnel using the
indicated sock. This is slow but l2tp_sk_to_tunnel is not used in
the datapath so performance isn't critical.
l2tp_tunnel_destruct needs a variant of l2tp_sk_to_tunnel which does
not bump the tunnel refcount since the tunnel refcount is already 0.
Change l2tp_sk_to_tunnel sk arg to const since it does not modify sk.
Signed-off-by: James Chapman <jchapman@katalix.com>
Signed-off-by: Tom Parkin <tparkin@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When handling colliding L2TPv3 session IDs, we use the existing
session IDR entry and link the new session on that using
session->coll_list. However, when using an existing IDR entry, we must
not do the idr_replace step.
Fixes: aa5e17e1f5 ("l2tp: store l2tpv3 sessions in per-net IDR")
Signed-off-by: James Chapman <jchapman@katalix.com>
Signed-off-by: Tom Parkin <tparkin@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
syzbot reported a UAF caused by a race when the L2TP work queue closes a
tunnel at the same time as a userspace thread closes a session in that
tunnel.
Tunnel cleanup is handled by a work queue which iterates through the
sessions contained within a tunnel, and closes them in turn.
Meanwhile, a userspace thread may arbitrarily close a session via
either netlink command or by closing the pppox socket in the case of
l2tp_ppp.
The race condition may occur when l2tp_tunnel_closeall walks the list
of sessions in the tunnel and deletes each one. Currently this is
implemented using list_for_each_safe, but because the list spinlock is
dropped in the loop body it's possible for other threads to manipulate
the list during list_for_each_safe's list walk. This can lead to the
list iterator being corrupted, leading to list_for_each_safe spinning.
One sequence of events which may lead to this is as follows:
* A tunnel is created, containing two sessions A and B.
* A thread closes the tunnel, triggering tunnel cleanup via the work
queue.
* l2tp_tunnel_closeall runs in the context of the work queue. It
removes session A from the tunnel session list, then drops the list
lock. At this point the list_for_each_safe temporary variable is
pointing to the other session on the list, which is session B, and
the list can be manipulated by other threads since the list lock has
been released.
* Userspace closes session B, which removes the session from its parent
tunnel via l2tp_session_delete. Since l2tp_tunnel_closeall has
released the tunnel list lock, l2tp_session_delete is able to call
list_del_init on the session B list node.
* Back on the work queue, l2tp_tunnel_closeall resumes execution and
will now spin forever on the same list entry until the underlying
session structure is freed, at which point UAF occurs.
The solution is to iterate over the tunnel's session list using
list_first_entry_not_null to avoid the possibility of the list
iterator pointing at a list item which may be removed during the walk.
Also, have l2tp_tunnel_closeall ref each session while it processes it
to prevent another thread from freeing it.
cpu1 cpu2
--- ---
pppol2tp_release()
spin_lock_bh(&tunnel->list_lock);
for (;;) {
session = list_first_entry_or_null(&tunnel->session_list,
struct l2tp_session, list);
if (!session)
break;
list_del_init(&session->list);
spin_unlock_bh(&tunnel->list_lock);
l2tp_session_delete(session);
l2tp_session_delete(session);
spin_lock_bh(&tunnel->list_lock);
}
spin_unlock_bh(&tunnel->list_lock);
Calling l2tp_session_delete on the same session twice isn't a problem
per-se, but if cpu2 manages to destruct the socket and unref the
session to zero before cpu1 progresses then it would lead to UAF.
Reported-by: syzbot+b471b7c936301a59745b@syzkaller.appspotmail.com
Reported-by: syzbot+c041b4ce3a6dfd1e63e2@syzkaller.appspotmail.com
Fixes: d18d3f0a24 ("l2tp: replace hlist with simple list for per-tunnel session list")
Signed-off-by: James Chapman <jchapman@katalix.com>
Signed-off-by: Tom Parkin <tparkin@katalix.com>
Link: https://patch.msgid.link/20240704152508.1923908-1-jchapman@katalix.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Remove duplicate included header file trace.h and the following warning
reported by make includecheck:
trace.h is included more than once
Compile-tested only.
Signed-off-by: Thorsten Blum <thorsten.blum@toblux.com>
Reviewed-by: Michal Kubiak <michal.kubiak@intel.com>
Link: https://patch.msgid.link/20240703061147.691973-2-thorsten.blum@toblux.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The per-tunnel session list is no longer used by the
datapath. However, we still need a list of sessions in the tunnel for
l2tp_session_get_nth, which is used by management code. (An
alternative might be to walk each session IDR list, matching only
sessions of a given tunnel.)
Replace the per-tunnel hlist with a per-tunnel list. In functions
which walk a list of sessions of a tunnel, walk this list instead.
Signed-off-by: James Chapman <jchapman@katalix.com>
Reviewed-by: Tom Parkin <tparkin@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
All users of l2tp_tunnel_get_session are now gone so it can be
removed.
Signed-off-by: James Chapman <jchapman@katalix.com>
Reviewed-by: Tom Parkin <tparkin@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add generic session getter which uses IDR. Replace all users of
l2tp_tunnel_get_session which uses the per-tunnel session list to use
the generic getter.
Signed-off-by: James Chapman <jchapman@katalix.com>
Reviewed-by: Tom Parkin <tparkin@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If UDP sockets are aliased, sk might be the wrong socket. There's no
benefit to using sk_user_data to do some checks on the associated
tunnel context. Just report the error anyway, like udp core does.
Signed-off-by: James Chapman <jchapman@katalix.com>
Reviewed-by: Tom Parkin <tparkin@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Modify UDP decap to not use the tunnel pointer which comes from the
sock's sk_user_data when parsing the L2TP header. By looking up the
destination session using only the packet contents we avoid potential
UDP 5-tuple aliasing issues which arise from depending on the socket
that received the packet.
Drop the useless error messages on short packet or on failing to find
a session since the tunnel pointer might point to a different tunnel
if multiple sockets use the same 5-tuple.
Short packets (those not big enough to contain an L2TP header) are no
longer counted in the tunnel's invalid counter because we can't derive
the tunnel until we parse the l2tp header to lookup the session.
l2tp_udp_encap_recv was a small wrapper around l2tp_udp_recv_core which
used sk_user_data to derive a tunnel pointer in an RCU-safe way. But
we no longer need the tunnel pointer, so remove that code and combine
the two functions.
Signed-off-by: James Chapman <jchapman@katalix.com>
Reviewed-by: Tom Parkin <tparkin@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
L2TPv2 sessions are currently kept in a per-tunnel hashlist, keyed by
16-bit session_id. When handling received L2TPv2 packets, we need to
first derive the tunnel using the 16-bit tunnel_id or sock, then
lookup the session in a per-tunnel hlist using the 16-bit session_id.
We want to avoid using sk_user_data in the datapath and double lookups
on every packet. So instead, use a per-net IDR to hold L2TPv2
sessions, keyed by a 32-bit value derived from the 16-bit tunnel_id
and session_id. This will allow the L2TPv2 UDP receive datapath to
lookup a session with a single lookup without deriving the tunnel
first.
L2TPv2 sessions are held in their own IDR to avoid potential
key collisions with L2TPv3 sessions.
Signed-off-by: James Chapman <jchapman@katalix.com>
Reviewed-by: Tom Parkin <tparkin@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
L2TPv3 sessions are currently held in one of two fixed-size hash
lists: either a per-net hashlist (IP-encap), or a per-tunnel hashlist
(UDP-encap), keyed by the L2TPv3 32-bit session_id.
In order to lookup L2TPv3 sessions in UDP-encap tunnels efficiently
without finding the tunnel first via sk_user_data, UDP sessions are
now kept in a per-net session list, keyed by session ID. Convert the
existing per-net hashlist to use an IDR for better performance when
there are many sessions and have L2TPv3 UDP sessions use the same IDR.
Although the L2TPv3 RFC states that the session ID alone identifies
the session, our implementation has allowed the same session ID to be
used in different L2TP UDP tunnels. To retain support for this, a new
per-net session hashtable is used, keyed by the sock and session
ID. If on creating a new session, a session already exists with that
ID in the IDR, the colliding sessions are added to the new hashtable
and the existing IDR entry is flagged. When looking up sessions, the
approach is to first check the IDR and if no unflagged match is found,
check the new hashtable. The sock is made available to session getters
where session ID collisions are to be considered. In this way, the new
hashtable is used only for session ID collisions so can be kept small.
For managing session removal, we need a list of colliding sessions
matching a given ID in order to update or remove the IDR entry of the
ID. This is necessary to detect session ID collisions when future
sessions are created. The list head is allocated on first collision
of a given ID and refcounted.
Signed-off-by: James Chapman <jchapman@katalix.com>
Reviewed-by: Tom Parkin <tparkin@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Remove an unused variable in struct l2tp_tunnel which was left behind
by commit c4d48a58f3 ("l2tp: convert l2tp_tunnel_list to idr").
Signed-off-by: James Chapman <jchapman@katalix.com>
Reviewed-by: Tom Parkin <tparkin@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since commit a36e185e8c
("udp: Handle ICMP errors for tunnels with same destination port on both endpoints")
UDP's handling of ICMP errors has allowed for UDP-encap tunnels to
determine socket associations in scenarios where the UDP hash lookup
could not.
Subsequently, commit d26796ae58
("udp: check udp sock encap_type in __udp_lib_err")
subtly tweaked the approach such that UDP ICMP error handling would be
skipped for any UDP socket which has encapsulation enabled.
In the case of L2TP tunnel sockets using UDP-encap, this latter
modification effectively broke ICMP error reporting for the L2TP
control plane.
To a degree this isn't catastrophic inasmuch as the L2TP control
protocol defines a reliable transport on top of the underlying packet
switching network which will eventually detect errors and time out.
However, paying attention to the ICMP error reporting allows for more
timely detection of errors in L2TP userspace, and aids in debugging
connectivity issues.
Reinstate ICMP error handling for UDP encap L2TP tunnels:
* implement struct udp_tunnel_sock_cfg .encap_err_rcv in order to allow
the L2TP code to handle ICMP errors;
* only implement error-handling for tunnels which have a managed
socket: unmanaged tunnels using a kernel socket have no userspace to
report errors back to;
* flag the error on the socket, which allows for userspace to get an
error such as -ECONNREFUSED back from sendmsg/recvmsg;
* pass the error into ip[v6]_icmp_error() which allows for userspace to
get extended error information via. MSG_ERRQUEUE.
Fixes: d26796ae58 ("udp: check udp sock encap_type in __udp_lib_err")
Signed-off-by: Tom Parkin <tparkin@katalix.com>
Link: https://lore.kernel.org/r/20240513172248.623261-1-tparkin@katalix.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
628bc3e5a1 ("l2tp: Support several sockets with same IP/port quadruple")
added support for several L2TPv2 tunnels using the same IP/port quadruple,
but if an L2TPv3 socket exists it could eat all the trafic. We thus have to
first use the version from the packet to get the proper tunnel, and only
then check that the version matches.
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Reviewed-by: James Chapman <jchapman@katalix.com>
Link: https://lore.kernel.org/r/20240509205812.4063198-1-samuel.thibault@ens-lyon.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Some l2tp providers will use 1701 as origin port and open several
tunnels for the same origin and target. On the Linux side, this
may mean opening several sockets, but then trafic will go to only
one of them, losing the trafic for the tunnel of the other socket
(or leaving it up to userland, consuming a lot of cpu%).
This can also happen when the l2tp provider uses a cluster, and
load-balancing happens to migrate from one origin IP to another one,
for which a socket was already established. Managing reassigning
tunnels from one socket to another would be very hairy for userland.
Lastly, as documented in l2tpconfig(1), as client it may be necessary
to use 1701 as origin port for odd firewalls reasons, which could
prevent from establishing several tunnels to a l2tp server, for the
same reason: trafic would get only on one of the two sockets.
With the V2 protocol it is however easy to route trafic to the proper
tunnel, by looking up the tunnel number in the network namespace. This
fixes the three cases altogether.
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Link: https://lore.kernel.org/r/20240506215336.1470009-1-samuel.thibault@ens-lyon.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Cross-merge networking fixes after downstream PR.
Conflicts:
include/linux/filter.h
kernel/bpf/core.c
66e13b615a ("bpf: verifier: prevent userspace memory access")
d503a04f8b ("bpf: Add support for certain atomics in bpf_arena to x86 JIT")
https://lore.kernel.org/all/20240429114939.210328b0@canb.auug.org.au/
No adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
I added dst_rt6_info() in commit
e8dfd42c17 ("ipv6: introduce dst_rt6_info() helper")
This patch does a similar change for IPv4.
Instead of (struct rtable *)dst casts, we can use :
#define dst_rtable(_ptr) \
container_of_const(_ptr, struct rtable, dst)
Patch is smaller than IPv6 one, because IPv4 has skb_rtable() helper.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Link: https://lore.kernel.org/r/20240429133009.1227754-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Instead of (struct rt6_info *)dst casts, we can use :
#define dst_rt6_info(_ptr) \
container_of_const(_ptr, struct rt6_info, dst)
Some places needed missing const qualifiers :
ip6_confirm_neigh(), ipv6_anycast_destination(),
ipv6_unicast_destination(), has_gateway()
v2: added missing parts (David Ahern)
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Drop the flow-hash of the skb when forwarding to the L2TP netdev.
This avoids the L2TP qdisc from using the flow-hash from the outer
packet, which is identical for every flow within the tunnel.
This does not affect every platform but is specific for the ethernet
driver. It depends on the platform including L4 information in the
flow-hash.
One such example is the Mediatek Filogic MT798x family of networking
processors.
Fixes: d9e31d17ce ("l2tp: Add L2TP ethernet pseudowire support")
Acked-by: James Chapman <jchapman@katalix.com>
Signed-off-by: David Bauer <mail@david-bauer.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240424171110.13701-1-mail@david-bauer.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
