Each page table should be created by allocating a complete page size
for it. Otherwise, the content of the page table would be corrupted
somewhere through memory allocation which allocates the memory at the
middle of the page table for other use.
Signed-off-by: Zong Li <zong.li@sifive.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Tell git to not track the compiled boot/loader and boot/loader.lds
files.
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Historically, we have been enabling all interrupts for each
HART in trap_init(). Ideally, we should only enable M-mode
interrupts for M-mode kernel and S-mode interrupts for S-mode
kernel in trap_init().
Currently, we get suprious S-mode interrupts on Kendryte K210
board running M-mode NO-MMU kernel because we are enabling all
interrupts in trap_init(). To fix this, we only enable software
and external interrupt in trap_init(). In future, trap_init()
will only enable software interrupt and PLIC driver will enable
external interrupt using CPU notifiers.
Fixes: a4c3733d32 ("riscv: abstract out CSR names for supervisor vs machine mode")
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Tested-by: Palmer Dabbelt <palmerdabbelt@google.com> [QMEU virt machine with SMP]
[Palmer: Move the Fixes up to a newer commit]
Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
When the kernel is running in S-mode, the expectation is that the
bootloader or SBI layer will configure the PMP to allow the kernel to
access physical memory. But, when the kernel is running in M-mode and is
started with the ELF "loader", there's probably no bootloader or SBI layer
involved to configure the PMP. Thus, we need to configure the PMP
ourselves to enable the kernel to access all regions.
Signed-off-by: Greentime Hu <greentime.hu@sifive.com>
Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
- Enable CMA
- Add support for MB v11
- Defconfig updates
- Minor fixes
-----BEGIN PGP SIGNATURE-----
iF0EABECAB0WIQQbPNTMvXmYlBPRwx7KSWXLKUoMIQUCXjlJ1gAKCRDKSWXLKUoM
IWy9AJ4tauV9sUb+zNadrYxI+2zemRstUwCfQ49LG4kHpFCv8ldSTmhBPJY/3MI=
=QpT4
-----END PGP SIGNATURE-----
Merge tag 'microblaze-v5.6-rc1' of git://git.monstr.eu/linux-2.6-microblaze
Pull Microblaze update from Michal Simek:
- enable CMA
- add support for MB v11
- defconfig updates
- minor fixes
* tag 'microblaze-v5.6-rc1' of git://git.monstr.eu/linux-2.6-microblaze:
microblaze: Add ID for Microblaze v11
microblaze: Prevent the overflow of the start
microblaze: Wire CMA allocator
asm-generic: Make dma-contiguous.h a mandatory include/asm header
microblaze: Sync defconfig with latest Kconfig layout
microblaze: defconfig: Disable EXT2 driver and Enable EXT3 & EXT4 drivers
microblaze: Align comments with register usage
dma-continuguous.h is generic for all architectures except arm32 which has
its own version.
Similar change was done for msi.h by commit a1b39bae16
("asm-generic: Make msi.h a mandatory include/asm header")
Suggested-by: Christoph Hellwig <hch@infradead.org>
Link: https://lore.kernel.org/linux-arm-kernel/20200117080446.GA8980@lst.de/T/#m92bb56b04161057635d4142e1b3b9b6b0a70122e
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Paul Walmsley <paul.walmsley@sifive.com> # for arch/riscv
walk_page_range() is going to be allowed to walk page tables other than
those of user space. For this it needs to know when it has reached a
'leaf' entry in the page tables. This information is provided by the
p?d_leaf() functions/macros.
For riscv a page is a leaf page when it has a read, write or execute bit
set on it.
Link: http://lkml.kernel.org/r/20191218162402.45610-8-steven.price@arm.com
Signed-off-by: Steven Price <steven.price@arm.com>
Reviewed-by: Alexandre Ghiti <alex@ghiti.fr>
Reviewed-by: Zong Li <zong.li@sifive.com>
Acked-by: Paul Walmsley <paul.walmsley@sifive.com> [arch/riscv]
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Hogan <jhogan@kernel.org>
Cc: James Morse <james.morse@arm.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: "Liang, Kan" <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Paul Burton <paul.burton@mips.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This tag contains a handful of patches that I'd like to target for this merge
window:
* Support for kasan.
* 32-bit physical addresses on rv32i-based systems.
* Support for CONFIG_DEBUG_VIRTUAL
* DT entry for the FU540 GPIO controller, which has recently had a device
driver merged.
These boot a buildroot-based system on QEMU's virt board for me.
-----BEGIN PGP SIGNATURE-----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=W7f7
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-5.6-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V updates from Palmer Dabbelt:
"This contains a handful of patches for this merge window:
- Support for kasan
- 32-bit physical addresses on rv32i-based systems
- Support for CONFIG_DEBUG_VIRTUAL
- DT entry for the FU540 GPIO controller, which has recently had a
device driver merged
These boot a buildroot-based system on QEMU's virt board for me"
* tag 'riscv-for-linus-5.6-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: dts: Add DT support for SiFive FU540 GPIO driver
riscv: mm: add support for CONFIG_DEBUG_VIRTUAL
riscv: keep 32-bit kernel to 32-bit phys_addr_t
kasan: Add riscv to KASAN documentation.
riscv: Add KASAN support
kasan: No KASAN's memmove check if archs don't have it.
couple of things of note:
- Conversion of the NFS documentation to RST
- A new document on how to help with documentation (and a maintainer
profile entry too)
Plus the usual collection of typo fixes, etc.
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEIw+MvkEiF49krdp9F0NaE2wMflgFAl4wnWwPHGNvcmJldEBs
d24ubmV0AAoJEBdDWhNsDH5YFPIH/069z5bJMrT3QRzENu8A9Elz76IXoy7pJOmJ
53Ml5+c4sYpvV3o6d9n5TSvdy1pH0Shw73FbJzUIMj0ZCcHysWVO1eBDlcj8soJQ
UonCXbKc+30AJBoKZqAC3jjFw0/fXwD1x+GzQo+l0LMQDOc0i0Luv8/riR5c9hEO
5TOXB2GyhHnbSFxzcN9afmBsuNz1cPa/fg5q6zL+5Q/fUUOJ6IcYwq165P2EwZdm
KRah299VU/XhrYlHJX7OZX3ck9+PaYURSpv4KH81J4jhmoBWAw5jPt77Qw8aN3w9
LcNip+qgpx9wC7OgBiqdJkKcvsNy76pfDhUOj+XarGisA8031d0=
=9m/7
-----END PGP SIGNATURE-----
Merge tag 'docs-5.6' of git://git.lwn.net/linux
Pull documentation updates from Jonathan Corbet:
"It has been a relatively quiet cycle for documentation, but there's
still a couple of things of note:
- Conversion of the NFS documentation to RST
- A new document on how to help with documentation (and a maintainer
profile entry too)
Plus the usual collection of typo fixes, etc"
* tag 'docs-5.6' of git://git.lwn.net/linux: (40 commits)
docs: filesystems: add overlayfs to index.rst
docs: usb: remove some broken references
scripts/find-unused-docs: Fix massive false positives
docs: nvdimm: use ReST notation for subsection
zram: correct documentation about sysfs node of huge page writeback
Documentation: zram: various fixes in zram.rst
Add a maintainer entry profile for documentation
Add a document on how to contribute to the documentation
docs: Keep up with the location of NoUri
Documentation: Call out example SYM_FUNC_* usage as x86-specific
Documentation: nfs: fault_injection: convert to ReST
Documentation: nfs: pnfs-scsi-server: convert to ReST
Documentation: nfs: convert pnfs-block-server to ReST
Documentation: nfs: idmapper: convert to ReST
Documentation: convert nfsd-admin-interfaces to ReST
Documentation: nfs-rdma: convert to ReST
Documentation: nfsroot.rst: COSMETIC: refill a paragraph
Documentation: nfsroot.txt: convert to ReST
Documentation: convert nfs.txt to ReST
Documentation: filesystems: convert vfat.txt to RST
...
Here are the big set of tty and serial driver updates for 5.6-rc1
Included in here are:
- dummy_con cleanups (touches lots of arch code)
- sysrq logic cleanups (touches lots of serial drivers)
- samsung driver fixes (wasn't really being built)
- conmakeshash move to tty subdir out of scripts
- lots of small tty/serial driver updates
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXjFRBg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yn2VACgkge7vTeUNeZFc+6F4NWphAQ5tCQAoK/MMbU6
0O8ef7PjFwCU4s227UTv
=6m40
-----END PGP SIGNATURE-----
Merge tag 'tty-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial driver updates from Greg KH:
"Here are the big set of tty and serial driver updates for 5.6-rc1
Included in here are:
- dummy_con cleanups (touches lots of arch code)
- sysrq logic cleanups (touches lots of serial drivers)
- samsung driver fixes (wasn't really being built)
- conmakeshash move to tty subdir out of scripts
- lots of small tty/serial driver updates
All of these have been in linux-next for a while with no reported
issues"
* tag 'tty-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (140 commits)
tty: n_hdlc: Use flexible-array member and struct_size() helper
tty: baudrate: SPARC supports few more baud rates
tty: baudrate: Synchronise baud_table[] and baud_bits[]
tty: serial: meson_uart: Add support for kernel debugger
serial: imx: fix a race condition in receive path
serial: 8250_bcm2835aux: Document struct bcm2835aux_data
serial: 8250_bcm2835aux: Use generic remapping code
serial: 8250_bcm2835aux: Allocate uart_8250_port on stack
serial: 8250_bcm2835aux: Suppress register_port error on -EPROBE_DEFER
serial: 8250_bcm2835aux: Suppress clk_get error on -EPROBE_DEFER
serial: 8250_bcm2835aux: Fix line mismatch on driver unbind
serial_core: Remove unused member in uart_port
vt: Correct comment documenting do_take_over_console()
vt: Delete comment referencing non-existent unbind_con_driver()
arch/xtensa/setup: Drop dummy_con initialization
arch/x86/setup: Drop dummy_con initialization
arch/unicore32/setup: Drop dummy_con initialization
arch/sparc/setup: Drop dummy_con initialization
arch/sh/setup: Drop dummy_con initialization
arch/s390/setup: Drop dummy_con initialization
...
Pull networking updates from David Miller:
1) Add WireGuard
2) Add HE and TWT support to ath11k driver, from John Crispin.
3) Add ESP in TCP encapsulation support, from Sabrina Dubroca.
4) Add variable window congestion control to TIPC, from Jon Maloy.
5) Add BCM84881 PHY driver, from Russell King.
6) Start adding netlink support for ethtool operations, from Michal
Kubecek.
7) Add XDP drop and TX action support to ena driver, from Sameeh
Jubran.
8) Add new ipv4 route notifications so that mlxsw driver does not have
to handle identical routes itself. From Ido Schimmel.
9) Add BPF dynamic program extensions, from Alexei Starovoitov.
10) Support RX and TX timestamping in igc, from Vinicius Costa Gomes.
11) Add support for macsec HW offloading, from Antoine Tenart.
12) Add initial support for MPTCP protocol, from Christoph Paasch,
Matthieu Baerts, Florian Westphal, Peter Krystad, and many others.
13) Add Octeontx2 PF support, from Sunil Goutham, Geetha sowjanya, Linu
Cherian, and others.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1469 commits)
net: phy: add default ARCH_BCM_IPROC for MDIO_BCM_IPROC
udp: segment looped gso packets correctly
netem: change mailing list
qed: FW 8.42.2.0 debug features
qed: rt init valid initialization changed
qed: Debug feature: ilt and mdump
qed: FW 8.42.2.0 Add fw overlay feature
qed: FW 8.42.2.0 HSI changes
qed: FW 8.42.2.0 iscsi/fcoe changes
qed: Add abstraction for different hsi values per chip
qed: FW 8.42.2.0 Additional ll2 type
qed: Use dmae to write to widebus registers in fw_funcs
qed: FW 8.42.2.0 Parser offsets modified
qed: FW 8.42.2.0 Queue Manager changes
qed: FW 8.42.2.0 Expose new registers and change windows
qed: FW 8.42.2.0 Internal ram offsets modifications
MAINTAINERS: Add entry for Marvell OcteonTX2 Physical Function driver
Documentation: net: octeontx2: Add RVU HW and drivers overview
octeontx2-pf: ethtool RSS config support
octeontx2-pf: Add basic ethtool support
...
Pull scheduler updates from Ingo Molnar:
"These were the main changes in this cycle:
- More -rt motivated separation of CONFIG_PREEMPT and
CONFIG_PREEMPTION.
- Add more low level scheduling topology sanity checks and warnings
to filter out nonsensical topologies that break scheduling.
- Extend uclamp constraints to influence wakeup CPU placement
- Make the RT scheduler more aware of asymmetric topologies and CPU
capacities, via uclamp metrics, if CONFIG_UCLAMP_TASK=y
- Make idle CPU selection more consistent
- Various fixes, smaller cleanups, updates and enhancements - please
see the git log for details"
* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (58 commits)
sched/fair: Define sched_idle_cpu() only for SMP configurations
sched/topology: Assert non-NUMA topology masks don't (partially) overlap
idle: fix spelling mistake "iterrupts" -> "interrupts"
sched/fair: Remove redundant call to cpufreq_update_util()
sched/psi: create /proc/pressure and /proc/pressure/{io|memory|cpu} only when psi enabled
sched/fair: Fix sgc->{min,max}_capacity calculation for SD_OVERLAP
sched/fair: calculate delta runnable load only when it's needed
sched/cputime: move rq parameter in irqtime_account_process_tick
stop_machine: Make stop_cpus() static
sched/debug: Reset watchdog on all CPUs while processing sysrq-t
sched/core: Fix size of rq::uclamp initialization
sched/uclamp: Fix a bug in propagating uclamp value in new cgroups
sched/fair: Load balance aggressively for SCHED_IDLE CPUs
sched/fair : Improve update_sd_pick_busiest for spare capacity case
watchdog: Remove soft_lockup_hrtimer_cnt and related code
sched/rt: Make RT capacity-aware
sched/fair: Make EAS wakeup placement consider uclamp restrictions
sched/fair: Make task_fits_capacity() consider uclamp restrictions
sched/uclamp: Rename uclamp_util_with() into uclamp_rq_util_with()
sched/uclamp: Make uclamp util helpers use and return UL values
...
While rv32 technically has 34-bit physical addresses, no current platforms
use it and it's likely to shake out driver bugs.
Let's keep 64-bit phys_addr_t off on 32-bit builds until one shows up,
since other work will be needed to make such a system useful anyway.
PHYS_ADDR_T_64BIT is def_bool 64BIT, so just remove the select.
Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
This patch ports the feature Kernel Address SANitizer (KASAN).
Note: The start address of shadow memory is at the beginning of kernel
space, which is 2^64 - (2^39 / 2) in SV39. The size of the kernel space is
2^38 bytes so the size of shadow memory should be 2^38 / 8. Thus, the
shadow memory would not overlap with the fixmap area.
There are currently two limitations in this port,
1. RV64 only: KASAN need large address space for extra shadow memory
region.
2. KASAN can't debug the modules since the modules are allocated in VMALLOC
area. We mapped the shadow memory, which corresponding to VMALLOC area, to
the kasan_early_shadow_page because we don't have enough physical space for
all the shadow memory corresponding to VMALLOC area.
Signed-off-by: Nick Hu <nickhu@andestech.com>
Reported-by: Greentime Hu <green.hu@gmail.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
The existing __lshrti3 was really inefficient, and the other two helpers
are also needed to compile some modules.
Add the missing versions, and export all of the symbols like arm64
already does.
This code is based on the assembly generated by libgcc builds.
This fixes a build break triggered by ubsan:
riscv64-unknown-linux-gnu-ld: lib/ubsan.o: in function `.L2':
ubsan.c:(.text.unlikely+0x38): undefined reference to `__ashlti3'
riscv64-unknown-linux-gnu-ld: ubsan.c:(.text.unlikely+0x42): undefined reference to `__ashrti3'
Signed-off-by: Olof Johansson <olof@lixom.net>
[paul.walmsley@sifive.com: use SYM_FUNC_{START,END} instead of
ENTRY/ENDPROC; note libgcc origin]
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
Temporary files used in the VDSO build process linger on even after make
mrproper: vdso-dummy.o.tmp, vdso.so.dbg.tmp.
Delete them once they're no longer needed.
Signed-off-by: Ilie Halip <ilie.halip@gmail.com>
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
The code in secondary_park is currently placed in the .init section. The
kernel reclaims and clears this code when it finishes booting. That
causes the cores parked in it to go to somewhere unpredictable, so we
move this function out of init to make sure the cores stay looping there.
The instruction bgeu a0, t0, .Lsecondary_park may have "a relocation
truncated to fit" issue during linking time. It is because that sections
are too far to jump. Let's use tail to jump to the .Lsecondary_park.
Signed-off-by: Greentime Hu <greentime.hu@sifive.com>
Reviewed-by: Anup Patel <anup.patel@sifive.com>
Cc: Andreas Schwab <schwab@suse.de>
Cc: stable@vger.kernel.org
Fixes: 76d2a0493a ("RISC-V: Init and Halt Code")
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
con_init in tty/vt.c will now set conswitchp to dummy_con if it's unset.
Drop it from arch setup code.
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Link: https://lore.kernel.org/r/20191218214506.49252-19-nivedita@alum.mit.edu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Two fixes for RISC-V:
- Clear FP registers during boot when FP support is present, rather than
when they aren't present
- Move the header files associated with the SiFive L2 cache controller
to drivers/soc (where the code was recently moved)
-----BEGIN PGP SIGNATURE-----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=qvPe
-----END PGP SIGNATURE-----
Merge tag 'riscv/for-v5.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Paul Walmsley:
"Two fixes for RISC-V:
- Clear FP registers during boot when FP support is present, rather
than when they aren't present
- Move the header files associated with the SiFive L2 cache
controller to drivers/soc (where the code was recently moved)"
* tag 'riscv/for-v5.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: Fixup obvious bug for fp-regs reset
riscv: move sifive_l2_cache.h to include/soc
CSR_MISA is defined in Privileged Architectures' spec: 3.1.1 Machine
ISA Register misa. Every bit:1 indicate a feature, so we should beqz
reset_done when there is no F/D bit in csr_misa register.
Signed-off-by: Guo Ren <ren_guo@c-sky.com>
[paul.walmsley@sifive.com: fix typo in commit message]
Fixes: 9e80635619 ("riscv: clear the instruction cache and all registers when booting")
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
The commit 9209fb5189 ("riscv: move sifive_l2_cache.c to drivers/soc")
moves the sifive L2 cache driver to driver/soc. It did not move the
header file along with the driver. Therefore this patch moves the header
file to driver/soc
Signed-off-by: Yash Shah <yash.shah@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
[paul.walmsley@sifive.com: updated to fix the include guard]
Fixes: 9209fb5189 ("riscv: move sifive_l2_cache.c to drivers/soc")
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
The ungrafting from PRIO bug fixes in net, when merged into net-next,
merge cleanly but create a build failure. The resolution used here is
from Petr Machata.
Signed-off-by: David S. Miller <davem@davemloft.net>
"IRQ_TIMER", used in the arch/riscv CSR header file, is a sufficiently
generic macro name that it's used by several source files across the
Linux code base. Some of these other files ultimately include the
arch/riscv CSR include file, causing collisions. Fix by prefixing the
RISC-V csr.h IRQ_ macro names with an RV_ prefix.
Fixes: a4c3733d32 ("riscv: abstract out CSR names for supervisor vs machine mode")
Reported-by: Olof Johansson <olof@lixom.net>
Acked-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
The condition should be logical NOT to assign the hook address to parent
address. Because the return value 0 of function_graph_enter upon
success.
Fixes: e949b6db51 (riscv/function_graph: Simplify with function_graph_enter())
Signed-off-by: Zong Li <zong.li@sifive.com>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: stable@vger.kernel.org
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
This patch enables GCOV code coverage measurement on RISC-V.
Lightly tested on QEMU and Hifive Unleashed board, seems to work as
expected.
Signed-off-by: Zong Li <zong.li@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Acked-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
__pa_symbol is the marcro that should be used for kernel symbols. It is
also a pre-requisite for DEBUG_VIRTUAL which will do bounds checking.
Signed-off-by: Zong Li <zong.li@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
This is needed by LKDTM (crash dump test module), it calls
flush_icache_range(), which on RISC-V turns into flush_icache_all(). On
other architectures, the actual implementation is exported, so follow
that precedence and export it here too.
Fixes build of CONFIG_LKDTM that fails with:
ERROR: "flush_icache_all" [drivers/misc/lkdtm/lkdtm.ko] undefined!
Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
Running "stress-ng --enosys 4 -t 20 -v" showed a large number of kernel oops
with "Unable to handle kernel paging request at virtual address" message. This
happens when enosys stressor starts testing random non-valid syscalls.
I forgot to redirect any syscall below -1 to sys_ni_syscall.
With the patch kernel oops messages are gone while running stress-ng enosys
stressor.
Signed-off-by: David Abdurachmanov <david.abdurachmanov@sifive.com>
Fixes: 5340627e3f ("riscv: add support for SECCOMP and SECCOMP_FILTER")
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
When support for !MMU was added, the declaration of
__asm_copy_to_user() & __asm_copy_from_user() were #ifdefed
out hence their EXPORT_SYMBOL() give an error message like:
.../riscv_ksyms.c:13:15: error: '__asm_copy_to_user' undeclared here
.../riscv_ksyms.c:14:15: error: '__asm_copy_from_user' undeclared here
Since these symbols are not defined with !MMU it's wrong to export them.
Same for __clear_user() (even though this one is also declared in
include/asm-generic/uaccess.h and thus doesn't give an error message).
Fix this by doing the EXPORT_SYMBOL() directly where these symbols
are defined: inside lib/uaccess.S itself.
Fixes: 6bd33e1ece ("riscv: fix compile failure with EXPORT_SYMBOL() & !MMU")
Reported-by: kbuild test robot <lkp@intel.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
Daniel Borkmann says:
====================
pull-request: bpf-next 2019-12-27
The following pull-request contains BPF updates for your *net-next* tree.
We've added 127 non-merge commits during the last 17 day(s) which contain
a total of 110 files changed, 6901 insertions(+), 2721 deletions(-).
There are three merge conflicts. Conflicts and resolution looks as follows:
1) Merge conflict in net/bpf/test_run.c:
There was a tree-wide cleanup c593642c8b ("treewide: Use sizeof_field() macro")
which gets in the way with b590cb5f80 ("bpf: Switch to offsetofend in
BPF_PROG_TEST_RUN"):
<<<<<<< HEAD
if (!range_is_zero(__skb, offsetof(struct __sk_buff, priority) +
sizeof_field(struct __sk_buff, priority),
=======
if (!range_is_zero(__skb, offsetofend(struct __sk_buff, priority),
>>>>>>> 7c8dce4b16
There are a few occasions that look similar to this. Always take the chunk with
offsetofend(). Note that there is one where the fields differ in here:
<<<<<<< HEAD
if (!range_is_zero(__skb, offsetof(struct __sk_buff, tstamp) +
sizeof_field(struct __sk_buff, tstamp),
=======
if (!range_is_zero(__skb, offsetofend(struct __sk_buff, gso_segs),
>>>>>>> 7c8dce4b16
Just take the one with offsetofend() /and/ gso_segs. Latter is correct due to
850a88cc40 ("bpf: Expose __sk_buff wire_len/gso_segs to BPF_PROG_TEST_RUN").
2) Merge conflict in arch/riscv/net/bpf_jit_comp.c:
(I'm keeping Bjorn in Cc here for a double-check in case I got it wrong.)
<<<<<<< HEAD
if (is_13b_check(off, insn))
return -1;
emit(rv_blt(tcc, RV_REG_ZERO, off >> 1), ctx);
=======
emit_branch(BPF_JSLT, RV_REG_T1, RV_REG_ZERO, off, ctx);
>>>>>>> 7c8dce4b16
Result should look like:
emit_branch(BPF_JSLT, tcc, RV_REG_ZERO, off, ctx);
3) Merge conflict in arch/riscv/include/asm/pgtable.h:
<<<<<<< HEAD
=======
#define VMALLOC_SIZE (KERN_VIRT_SIZE >> 1)
#define VMALLOC_END (PAGE_OFFSET - 1)
#define VMALLOC_START (PAGE_OFFSET - VMALLOC_SIZE)
#define BPF_JIT_REGION_SIZE (SZ_128M)
#define BPF_JIT_REGION_START (PAGE_OFFSET - BPF_JIT_REGION_SIZE)
#define BPF_JIT_REGION_END (VMALLOC_END)
/*
* Roughly size the vmemmap space to be large enough to fit enough
* struct pages to map half the virtual address space. Then
* position vmemmap directly below the VMALLOC region.
*/
#define VMEMMAP_SHIFT \
(CONFIG_VA_BITS - PAGE_SHIFT - 1 + STRUCT_PAGE_MAX_SHIFT)
#define VMEMMAP_SIZE BIT(VMEMMAP_SHIFT)
#define VMEMMAP_END (VMALLOC_START - 1)
#define VMEMMAP_START (VMALLOC_START - VMEMMAP_SIZE)
#define vmemmap ((struct page *)VMEMMAP_START)
>>>>>>> 7c8dce4b16
Only take the BPF_* defines from there and move them higher up in the
same file. Remove the rest from the chunk. The VMALLOC_* etc defines
got moved via 01f52e16b8 ("riscv: define vmemmap before pfn_to_page
calls"). Result:
[...]
#define __S101 PAGE_READ_EXEC
#define __S110 PAGE_SHARED_EXEC
#define __S111 PAGE_SHARED_EXEC
#define VMALLOC_SIZE (KERN_VIRT_SIZE >> 1)
#define VMALLOC_END (PAGE_OFFSET - 1)
#define VMALLOC_START (PAGE_OFFSET - VMALLOC_SIZE)
#define BPF_JIT_REGION_SIZE (SZ_128M)
#define BPF_JIT_REGION_START (PAGE_OFFSET - BPF_JIT_REGION_SIZE)
#define BPF_JIT_REGION_END (VMALLOC_END)
/*
* Roughly size the vmemmap space to be large enough to fit enough
* struct pages to map half the virtual address space. Then
* position vmemmap directly below the VMALLOC region.
*/
#define VMEMMAP_SHIFT \
(CONFIG_VA_BITS - PAGE_SHIFT - 1 + STRUCT_PAGE_MAX_SHIFT)
#define VMEMMAP_SIZE BIT(VMEMMAP_SHIFT)
#define VMEMMAP_END (VMALLOC_START - 1)
#define VMEMMAP_START (VMALLOC_START - VMEMMAP_SIZE)
[...]
Let me know if there are any other issues.
Anyway, the main changes are:
1) Extend bpftool to produce a struct (aka "skeleton") tailored and specific
to a provided BPF object file. This provides an alternative, simplified API
compared to standard libbpf interaction. Also, add libbpf extern variable
resolution for .kconfig section to import Kconfig data, from Andrii Nakryiko.
2) Add BPF dispatcher for XDP which is a mechanism to avoid indirect calls by
generating a branch funnel as discussed back in bpfconf'19 at LSF/MM. Also,
add various BPF riscv JIT improvements, from Björn Töpel.
3) Extend bpftool to allow matching BPF programs and maps by name,
from Paul Chaignon.
4) Support for replacing cgroup BPF programs attached with BPF_F_ALLOW_MULTI
flag for allowing updates without service interruption, from Andrey Ignatov.
5) Cleanup and simplification of ring access functions for AF_XDP with a
bonus of 0-5% performance improvement, from Magnus Karlsson.
6) Enable BPF JITs for x86-64 and arm64 by default. Also, final version of
audit support for BPF, from Daniel Borkmann and latter with Jiri Olsa.
7) Move and extend test_select_reuseport into BPF program tests under
BPF selftests, from Jakub Sitnicki.
8) Various BPF sample improvements for xdpsock for customizing parameters
to set up and benchmark AF_XDP, from Jay Jayatheerthan.
9) Improve libbpf to provide a ulimit hint on permission denied errors.
Also change XDP sample programs to attach in driver mode by default,
from Toke Høiland-Jørgensen.
10) Extend BPF test infrastructure to allow changing skb mark from tc BPF
programs, from Nikita V. Shirokov.
11) Optimize prologue code sequence in BPF arm32 JIT, from Russell King.
12) Fix xdp_redirect_cpu BPF sample to manually attach to tracepoints after
libbpf conversion, from Jesper Dangaard Brouer.
13) Minor misc improvements from various others.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Several fixes, and one cleanup, for RISC-V.
Fixes:
- Fix an error in a Kconfig file that resulted in an undefined Kconfig
option "CONFIG_CONFIG_MMU"
- Fix undefined Kconfig option "CONFIG_CONFIG_MMU"
- Fix scratch register clearing in M-mode (affects nommu users)
- Fix a mismerge on my part that broke the build for
CONFIG_SPARSEMEM_VMEMMAP users
Cleanups:
- Move SiFive L2 cache-related code to drivers/soc, per request
-----BEGIN PGP SIGNATURE-----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=TpM4
-----END PGP SIGNATURE-----
Merge tag 'riscv/for-v5.5-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Paul Walmsley:
"Several fixes, and one cleanup, for RISC-V.
Fixes:
- Fix an error in a Kconfig file that resulted in an undefined
Kconfig option "CONFIG_CONFIG_MMU"
- Fix undefined Kconfig option "CONFIG_CONFIG_MMU"
- Fix scratch register clearing in M-mode (affects nommu users)
- Fix a mismerge on my part that broke the build for
CONFIG_SPARSEMEM_VMEMMAP users
Cleanup:
- Move SiFive L2 cache-related code to drivers/soc, per request"
* tag 'riscv/for-v5.5-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: move sifive_l2_cache.c to drivers/soc
riscv: define vmemmap before pfn_to_page calls
riscv: fix scratch register clearing in M-mode.
riscv: Fix use of undefined config option CONFIG_CONFIG_MMU
Pull networking fixes from David Miller:
1) Several nf_flow_table_offload fixes from Pablo Neira Ayuso,
including adding a missing ipv6 match description.
2) Several heap overflow fixes in mwifiex from qize wang and Ganapathi
Bhat.
3) Fix uninit value in bond_neigh_init(), from Eric Dumazet.
4) Fix non-ACPI probing of nxp-nci, from Stephan Gerhold.
5) Fix use after free in tipc_disc_rcv(), from Tuong Lien.
6) Enforce limit of 33 tail calls in mips and riscv JIT, from Paul
Chaignon.
7) Multicast MAC limit test is off by one in qede, from Manish Chopra.
8) Fix established socket lookup race when socket goes from
TCP_ESTABLISHED to TCP_LISTEN, because there lacks an intervening
RCU grace period. From Eric Dumazet.
9) Don't send empty SKBs from tcp_write_xmit(), also from Eric Dumazet.
10) Fix active backup transition after link failure in bonding, from
Mahesh Bandewar.
11) Avoid zero sized hash table in gtp driver, from Taehee Yoo.
12) Fix wrong interface passed to ->mac_link_up(), from Russell King.
13) Fix DSA egress flooding settings in b53, from Florian Fainelli.
14) Memory leak in gmac_setup_txqs(), from Navid Emamdoost.
15) Fix double free in dpaa2-ptp code, from Ioana Ciornei.
16) Reject invalid MTU values in stmmac, from Jose Abreu.
17) Fix refcount leak in error path of u32 classifier, from Davide
Caratti.
18) Fix regression causing iwlwifi firmware crashes on boot, from Anders
Kaseorg.
19) Fix inverted return value logic in llc2 code, from Chan Shu Tak.
20) Disable hardware GRO when XDP is attached to qede, frm Manish
Chopra.
21) Since we encode state in the low pointer bits, dst metrics must be
at least 4 byte aligned, which is not necessarily true on m68k. Add
annotations to fix this, from Geert Uytterhoeven.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (160 commits)
sfc: Include XDP packet headroom in buffer step size.
sfc: fix channel allocation with brute force
net: dst: Force 4-byte alignment of dst_metrics
selftests: pmtu: fix init mtu value in description
hv_netvsc: Fix unwanted rx_table reset
net: phy: ensure that phy IDs are correctly typed
mod_devicetable: fix PHY module format
qede: Disable hardware gro when xdp prog is installed
net: ena: fix issues in setting interrupt moderation params in ethtool
net: ena: fix default tx interrupt moderation interval
net/smc: unregister ib devices in reboot_event
net: stmmac: platform: Fix MDIO init for platforms without PHY
llc2: Fix return statement of llc_stat_ev_rx_null_dsap_xid_c (and _test_c)
net: hisilicon: Fix a BUG trigered by wrong bytes_compl
net: dsa: ksz: use common define for tag len
s390/qeth: don't return -ENOTSUPP to userspace
s390/qeth: fix promiscuous mode after reset
s390/qeth: handle error due to unsupported transport mode
cxgb4: fix refcount init for TC-MQPRIO offload
tc-testing: initial tdc selftests for cls_u32
...
The sifive_l2_cache.c is in no way related to RISC-V architecture
memory management. It is a little stub driver working around the fact
that the EDAC maintainers prefer their drivers to be structured in a
certain way that doesn't fit the SiFive SOCs.
Move the file to drivers/soc and add a Kconfig option for it, as well
as the whole drivers/soc boilerplate for CONFIG_SOC_SIFIVE.
Fixes: a967a289f1 ("RISC-V: sifive_l2_cache: Add L2 cache controller driver for SiFive SoCs")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Borislav Petkov <bp@suse.de>
[paul.walmsley@sifive.com: keep the MAINTAINERS change specific to the L2$ controller code]
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
pfn_to_page & page_to_pfn depend on vmemmap being available before the calls
if kernel is configured with CONFIG_SPARSEMEM_VMEMMAP=y. This was caused
by NOMMU changes which moved vmemmap definition bellow functions definitions
calling pfn_to_page & page_to_pfn.
Noticed while compiled 5.5-rc2 kernel for Fedora/RISCV.
v2:
- Add a comment for vmemmap in source
Signed-off-by: David Abdurachmanov <david.abdurachmanov@sifive.com>
Fixes: 6bd33e1ece ("riscv: add nommu support")
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
This patch fixes that the sscratch register clearing in M-mode. It cleared
sscratch register in M-mode, but it should clear mscratch register. That will
cause kernel trap if the CPU core doesn't support S-mode when trying to access
sscratch.
Fixes: 9e80635619 ("riscv: clear the instruction cache and all registers when booting")
Signed-off-by: Greentime Hu <greentime.hu@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
In Kconfig files, config options are written without the CONFIG_ prefix.
Fixes: 6bd33e1ece ("riscv: add nommu support")
Signed-off-by: Andreas Schwab <schwab@suse.de>
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
There are some typos in boot image header and riscv boot documentation.
Fix the typos.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com>
Link: https://lore.kernel.org/r/20191009010637.9955-1-atish.patra@wdc.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Add missing uapi header the BPF_PROG_TYPE_PERF_EVENT programs by
exporting struct user_regs_struct instead of struct pt_regs which is
in-kernel only.
Signed-off-by: Björn Töpel <bjorn.topel@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20191216091343.23260-9-bjorn.topel@gmail.com
Instead of using emit_imm() and emit_jalr() which can expand to six
instructions, start using jal or auipc+jalr.
Signed-off-by: Björn Töpel <bjorn.topel@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20191216091343.23260-8-bjorn.topel@gmail.com
