struct mipi_dbi is going to be split into an interface part and a display
pipeline part. The interface part can be used by drivers that need to
initialize the controller, but that won't upload the framebuffer over
this interface.
tinydrm uses the variable name 'mipi' but this is not a good name since
MIPI refers to a lot of standards. This patch changes the variable name
to 'dbidev' where it refers to the pipeline part of struct mipi_dbi.
Cc: Eric Anholt <eric@anholt.net>
Cc: David Lechner <david@lechnology.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: David Lechner <david@lechnology.com>
Acked-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20190722104312.16184-4-noralf@tronnes.org
struct mipi_dbi is going to be split into an interface part and a display
pipeline part. The interface part can be used by drivers that need to
initialize the controller, but that won't upload the framebuffer over
this interface.
tinydrm uses the variable name 'mipi' but this is not a good name since
MIPI refers to a lot of standards. This patch changes the variable name
to 'dbi' where it refers to the interface part of struct mipi_dbi.
Functions that use both future parts will have both variables temporarily
pointing to the same structure.
Cc: Eric Anholt <eric@anholt.net>
Cc: David Lechner <david@lechnology.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: David Lechner <david@lechnology.com>
Acked-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20190722104312.16184-3-noralf@tronnes.org
cmdlock protects command execution so put it in mipi_dbi_spi_init()
where it conceptually belongs.
This is prep work for the splitting of struct mipi_dbi.
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190722104312.16184-2-noralf@tronnes.org
Currently the displayed cursor buffer might be evicted from video memory.
Not unpinning the BO fixes this problem. At this point, pixels_current
also references the BO and it will be unpinned during the next cursor
update.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Fixes: 94dc57b103 ("drm/mgag200: Rewrite cursor handling")
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190723075425.24028-4-tzimmermann@suse.de
The hardware requires the correct memory address of the buffer. Currently
the same BO's address is programmed unconditionally, so only every second
cursor update actually becomes visible.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Fixes: 94dc57b103 ("drm/mgag200: Rewrite cursor handling")
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190723075425.24028-3-tzimmermann@suse.de
The cursor BO has to be pinned to video ram while it's being displayed.
With the current code, the BO might be pinned to system memory instead.
The patch fixes this problem.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Fixes: 94dc57b103 ("drm/mgag200: Rewrite cursor handling")
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190723075425.24028-2-tzimmermann@suse.de
tinydrm_display_pipe_init() has only one user now, so move it to mipi-dbi.
Changes:
- Remove drm_connector_helper_funcs.detect, it's always connected.
- Store the connector and mode in mipi_dbi instead of it's own struct.
Otherwise remove some leftover tinydrm-helpers.h inclusions.
Cc: Eric Anholt <eric@anholt.net>
Cc: David Lechner <david@lechnology.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190719155916.62465-12-noralf@tronnes.org
The MIPI DBI standard support more pixel formats than what this helper
supports. Add an init function that lets the driver use different
format(s). This avoids open coding mipi_dbi_init() in st7586.
st7586 sets preferred_depth but this is not necessary since it only
supports one format.
v2: Forgot to remove the mipi->rotation assignment in st7586,
mipi_dbi_init_with_formats() handles it.
Cc: David Lechner <david@lechnology.com>
Acked-by: David Lechner <david@lechnology.com>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Tested-by: David Lechner <david@lechnology.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190719155916.62465-11-noralf@tronnes.org
This is only used by mipi-dbi drivers so move it there.
The reason this isn't moved to the SPI subsystem is that it will in a
later patch pass a dummy rx buffer for SPI controllers that need this.
Low memory boards (64MB) can run into a problem allocating such a "large"
contiguous buffer on every transfer after a long up time.
This leaves a very specific use case, so we'll keep the function here.
mipi-dbi will first go through a refactoring though, before this will
be done.
Remove SPI todo entry now that we're done with the tinydrm.ko SPI code.
v2: Drop moving the mipi_dbi_spi_init() declaration (Sam)
Cc: David Lechner <david@lechnology.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: : David Lechner <david@lechnology.com>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190719155916.62465-8-noralf@tronnes.org
Prep work before moving the function to mipi-dbi.
tinydrm_spi_transfer() was made to support one class of drivers in
drivers/staging/fbtft that has not been converted to DRM yet, so strip
away the unused functionality:
- Start byte (header) is not used.
- No driver relies on the automatic 16-bit byte swapping on little endian
machines with SPI controllers only supporting 8 bits per word.
Other changes:
- No need to initialize ret
- No need for the WARN since mipi-dbi only uses 8 and 16 bpw.
- Use spi_message_init_with_transfers()
Cc: David Lechner <david@lechnology.com>
Acked-by: : David Lechner <david@lechnology.com>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190719155916.62465-7-noralf@tronnes.org
spi-bcm2835 can handle >64kB buffers now so there is no need to check
->max_dma_len. The tinydrm_spi_max_transfer_size() max_len argument is
not used by any callers, so not needed.
Then we have the spi_max module parameter. It was added because
staging/fbtft has support for it and there was a report that someone used
it to set a small buffer size to avoid popping on a USB soundcard on a
Raspberry Pi. In hindsight it shouldn't have been added, I should have
waited for it to become a problem first. I don't know it anyone is
actually using it, but since tinydrm_spi_transfer() is being moved to
mipi-dbi, I'm taking the opportunity to remove it. I'll add it back to
mipi-dbi if someone complains.
With that out of the way, spi_max_transfer_size() can be used instead.
The chosen 16kB buffer size for Type C Option 1 (9-bit) interface is
somewhat arbitrary, but a bigger buffer will have a miniscule impact on
transfer speed, so it's probably fine.
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190719155916.62465-6-noralf@tronnes.org
The SPI event tracing can dump the buffer now so no need for this.
Remove the debug print from tinydrm_spi_transfer() since this info can be
gleaned from the trace event.
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190719155916.62465-5-noralf@tronnes.org
tinydrm drivers announce DRM_MODE_CONNECTOR_VIRTUAL for its SPI drivers.
Use the new SPI connector type instead.
X server will now list the connector as Unknown instead of Virtual:
X.Org X Server 1.19.2
Release Date: 2017-03-02
<...>
[ 53523.905] (II) modeset(0): Output Unknown19-1 has no monitor section
[ 53523.908] (II) modeset(0): EDID for output Unknown19-1
[ 53523.910] (II) modeset(0): Printing probed modes for output Unknown19-1
[ 53523.911] (II) modeset(0): Modeline "320x240"x0.0 0.00 320 320 320 320 240 240 240 240 (0.0 kHz eP)
[ 53523.911] (II) modeset(0): Output Unknown19-1 connected
[ 53523.912] (II) modeset(0): Using exact sizes for initial modes
[ 53523.912] (II) modeset(0): Output Unknown19-1 using initial mode 320x240 +0+0
I won't chase down and fix userspace, but the new connector type will
trickle out to userspace eventually.
v2: Split patch in core and driver changes, expand commit message (Daniel)
Cc: David Lechner <david@lechnology.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: David Lechner <david@lechnology.com>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190719155916.62465-3-noralf@tronnes.org
tinydrm drivers announce DRM_MODE_CONNECTOR_VIRTUAL for its SPI drivers.
Add a SPI connector type to match the actual connector.
X will list the connector as Unknown:
X.Org X Server 1.19.2
Release Date: 2017-03-02
<...>
[ 53523.905] (II) modeset(0): Output Unknown19-1 has no monitor section
[ 53523.908] (II) modeset(0): EDID for output Unknown19-1
[ 53523.910] (II) modeset(0): Printing probed modes for output Unknown19-1
[ 53523.911] (II) modeset(0): Modeline "320x240"x0.0 0.00 320 320 320 320 240 240 240 240 (0.0 kHz eP)
[ 53523.911] (II) modeset(0): Output Unknown19-1 connected
[ 53523.912] (II) modeset(0): Using exact sizes for initial modes
[ 53523.912] (II) modeset(0): Output Unknown19-1 using initial mode 320x240 +0+0
The weston source shows that it will be listed as UNNAMED.
v2: Split patch in core and driver changes, expand commit message (Daniel)
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: David Lechner <david@lechnology.com>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190719155916.62465-2-noralf@tronnes.org
Fixes gcc '-Wunused-but-set-variable' warning:
drivers/gpu/drm/arm/display/komeda/komeda_plane.c:
In function komeda_plane_atomic_duplicate_state:
drivers/gpu/drm/arm/display/komeda/komeda_plane.c:161:35:
warning: variable old set but not used [-Wunused-but-set-variable
It is not used since commit 990dee3aa4 ("drm/komeda:
Computing image enhancer internally")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190722055627.38008-1-yuehaibing@huawei.com
Maxime didn't really compile-test this :-/
We need to re-apply
commit e4fa8457b2
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date: Fri Jun 14 22:35:25 2019 +0200
drm/prime: Align gem_prime_export with obj_funcs.export
plus make sure i915_gem_dma_buf.c doesn't get zombie-resurrect. It
moved in
commit 10be98a77c
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date: Tue May 28 10:29:49 2019 +0100
drm/i915: Move more GEM objects under gem/
v2: Remember the selftests (Chris).
Fixes: 03b0f2ce73 ("Merge v5.3-rc1 into drm-misc-next")
Cc: Maxime Ripard <maxime.ripard@bootlin.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Dave Airlie <airlied@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190722213759.26612-1-daniel.vetter@ffwll.ch
Add a modesetting driver for Grain Media GM12U320 based devices
(primarily Acer C120 projector, but there may be compatible devices).
This is based on the fb driver from Viacheslav Nurmekhamitov:
https://github.com/slavrn/gm12u320
This driver uses drm_simple_display_pipe to deal with all the atomic
stuff, gem_shmem_helper functions for buffer management and
drm_fbdev_generic_setup for fbdev emulation, so that leaves the driver
itself with only the actual code for talking to the gm12u320 chip,
leading to a nice simple and clean driver.
Changes in v2:
-Add drm-misc tree to MAINTAINERS
-Drop mode_config.preferred_depth = 24 / fix fbdev support
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190721132525.10396-1-hdegoede@redhat.com
After migrating several drivers to the generic fbdev
emulation there are no users left of drm_gem_fbdev_fb_create.
Delete the function.
Noticed that there was no callers while browsing
around in the drm_fb* code.
The code that referenced the function was removed by:
commit 13aff184ed ("drm/qxl: remove dead qxl fbdev emulation code")
The actual use was removed by:
commit 26d4707d44 ("drm/qxl: use generic fbdev emulation")
v2:
- Updated changelog based on feedback from Noralf
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190721140610.GA20842@ravnborg.org
Conversion from YUV to RGB depends on range (limited or full) and
encoding (BT.601 or BT.709). Current code doesn't consider this and
always uses BT.601 encoding and limited range.
Fix this by introducing new CSC matrices, which are selected based on
range and encoding parameters.
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190713120346.30349-4-jernej.skrabec@siol.net
It turns out addition of 0x200 to constant parts (+0.5) is not really
necessary. Besides, we can consider that before and fix value in CSC
matrix.
This simplifies register writes quiet a bit.
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190713120346.30349-3-jernej.skrabec@siol.net
Do not rely on including drm.h from drm_file.h,
as the include in drm_file.h will be dropped.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Sean Paul <sean@poorly.run>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <maxime.ripard@bootlin.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: Chunming Zhou <david1.zhou@amd.com>
Cc: Christian König <ckoenig.leichtzumerken@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190718161507.2047-10-sam@ravnborg.org
Do not rely on including drm.h from drm_file.h,
as the include in drm_file.h will be dropped.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Sean Paul <sean@poorly.run>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <maxime.ripard@bootlin.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Christian König <christian.koenig@amd.com>
Cc: Noralf Trønnes <noralf@tronnes.org>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20190718161507.2047-9-sam@ravnborg.org
Do not rely on including drm.h from drm_file.h,
as the include in drm_file.h will be dropped.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Sean Paul <sean@poorly.run>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <maxime.ripard@bootlin.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Eric Anholt <eric@anholt.net>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Rob Herring <robh@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190718161507.2047-8-sam@ravnborg.org
Do not rely on including drm.h from drm_file.h,
as the include in drm_file.h will be dropped.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Sean Paul <sean@poorly.run>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <maxime.ripard@bootlin.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Eric Anholt <eric@anholt.net>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Rob Herring <robh@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190718161507.2047-7-sam@ravnborg.org
The drm_os_linux.h header is deprecated.
Just opencode the sole DRM_WRITE32().
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Sean Paul <sean@poorly.run>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <maxime.ripard@bootlin.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190718161507.2047-5-sam@ravnborg.org
nouveau:
- bugfixes + TU116 enabling (minor iteration):w
amdgpu:
- large pile of fixes for new hw support this release (navi, vega20)
- audio hotplug fix
- bunch of corner cases and small fixes all over for amdgpu/kfd
komeda:
- back out some new properties (from this merge window) that needs
more pondering.
bochs: fb pitch setup
... plus a new panel quirk
-----BEGIN PGP SIGNATURE-----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=s190
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2019-07-19' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Daniel Vetter:
"Dave is back in shape, but now family got it so I'm doing the pull.
Two things worthy of note:
- nouveau feature pull was way too late, Dave&me decided to not take
that, so Ben spun up a pull with just the fixes.
- after some chatting with the arm display maintainers we decided to
change a bit how that's maintained, for more oversight/review and
cross vendor collab.
More details below:
nouveau:
- bugfixes
- TU116 enabling (minor iteration) :w
amdgpu:
- large pile of fixes for new hw support this release (navi, vega20)
- audio hotplug fix
- bunch of corner cases and small fixes all over for amdgpu/kfd
komeda:
- back out some new properties (from this merge window) that needs
more pondering.
bochs:
- fb pitch setup
core:
- a new panel quirk
- misc fixes"
* tag 'drm-next-2019-07-19' of git://anongit.freedesktop.org/drm/drm: (73 commits)
drm/nouveau/secboot/gp102-: remove WAR for SEC2 RTOS start bug
drm/nouveau/flcn/gp102-: improve implementation of bind_context() on SEC2/GSP
drm/nouveau: fix memory leak in nouveau_conn_reset()
drm/nouveau/dmem: missing mutex_lock in error path
drm/nouveau/hwmon: return EINVAL if the GPU is powered down for sensors reads
drm/nouveau: fix bogus GPL-2 license header
drm/nouveau: fix bogus GPL-2 license header
drm/nouveau/i2c: Enable i2c pads & busses during preinit
drm/nouveau/disp/tu102-: wire up scdc parameter setter
drm/nouveau/core: recognise TU116 chipset
drm/nouveau/kms: disallow dual-link harder if hdmi connection detected
drm/nouveau/disp/nv50-: fix center/aspect-corrected scaling
drm/nouveau/disp/nv50-: force scaler for any non-default LVDS/eDP modes
drm/nouveau/mcp89/mmu: Use mcp77_mmu_new instead of g84_mmu_new on MCP89.
drm/amd/display: init res_pool dccg_ref, dchub_ref with xtalin_freq
drm/amdgpu/pm: remove check for pp funcs in freq sysfs handlers
drm/amd/display: Force uclk to max for every state
drm/amdkfd: Remove GWS from process during uninit
drm/amd/amdgpu: Fix offset for vmid selection in debugfs interface
drm/amd/powerplay: update vega20 driver if to fit latest SMU firmware
...
Pull vfs mount updates from Al Viro:
"The first part of mount updates.
Convert filesystems to use the new mount API"
* 'work.mount0' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (63 commits)
mnt_init(): call shmem_init() unconditionally
constify ksys_mount() string arguments
don't bother with registering rootfs
init_rootfs(): don't bother with init_ramfs_fs()
vfs: Convert smackfs to use the new mount API
vfs: Convert selinuxfs to use the new mount API
vfs: Convert securityfs to use the new mount API
vfs: Convert apparmorfs to use the new mount API
vfs: Convert openpromfs to use the new mount API
vfs: Convert xenfs to use the new mount API
vfs: Convert gadgetfs to use the new mount API
vfs: Convert oprofilefs to use the new mount API
vfs: Convert ibmasmfs to use the new mount API
vfs: Convert qib_fs/ipathfs to use the new mount API
vfs: Convert efivarfs to use the new mount API
vfs: Convert configfs to use the new mount API
vfs: Convert binfmt_misc to use the new mount API
convenience helper: get_tree_single()
convenience helper get_tree_nodev()
vfs: Kill sget_userns()
...
drm-next-5.3-2019-07-18:
amdgpu:
- Navi DC fix for secondary adapters
- Fix Navi flickering with high res panels
- Navi SMU fixes
- Vega20 SMU fixes
- Fixes for audio hotplug on HG systems
- Fix for potential integer overflows on large buffer
migrations
- debugfs fixes for umr
- Various other small fixes
amdkfd:
- Apply noretry setting consistently
- Fix hang in eviction
- Properly clean up GWS on uninit
UAPI:
- clarify a comment on ctx priority
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190718211525.3374-1-alexander.deucher@amd.com
Appears to be fixed by "flcn/gp102-: improve implementation of
bind_context() on SEC2/GSP".
Tested on GP10[24678] and GV100.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
fixes bogus values userspace gets from hwmon while the GPU is powered down
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Reviewed-by: Rhys Kidd <rhyskidd@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
The bulk SPDX addition made all these files into GPL-2.0 licensed files.
However the remainder of the project is MIT-licensed, these files
were simply missing the boiler plate and got caught up in the global update.
Fixes: 96ac6d4351 (treewide: Add SPDX license identifier - Kbuild)
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
The bulk SPDX addition made all these files into GPL-2.0 licensed files.
However the remainder of the project is MIT-licensed, these files
(primarily header files) were simply missing the boiler plate and got
caught up in the global update.
Fixes: b24413180f (License cleanup: add SPDX GPL-2.0 license identifier to files with no license)
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Acked-by: Emil Velikov <emil.l.velikov@gmail.com>
Acked-by: Karol Herbst <kherbst@redhat.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
It turns out that while disabling i2c bus access from software when the
GPU is suspended was a step in the right direction with:
commit 342406e4fb ("drm/nouveau/i2c: Disable i2c bus access after
->fini()")
We also ended up accidentally breaking the vbios init scripts on some
older Tesla GPUs, as apparently said scripts can actually use the i2c
bus. Since these scripts are executed before initializing any
subdevices, we end up failing to acquire access to the i2c bus which has
left a number of cards with their fan controllers uninitialized. Luckily
this doesn't break hardware - it just means the fan gets stuck at 100%.
This also means that we've always been using our i2c busses before
initializing them during the init scripts for older GPUs, we just didn't
notice it until we started preventing them from being used until init.
It's pretty impressive this never caused us any issues before!
So, fix this by initializing our i2c pad and busses during subdev
pre-init. We skip initializing aux busses during pre-init, as those are
guaranteed to only ever be used by nouveau for DP aux transactions.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Tested-by: Marc Meledandri <m.meledandri@gmail.com>
Fixes: 342406e4fb ("drm/nouveau/i2c: Disable i2c bus access after ->fini()")
Cc: stable@vger.kernel.org
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Modesetting only, still waiting on ACR/GR firmware from NVIDIA for Turing
graphics/compute bring-up.
Each subsystem was compared with traces, along with various tests to check
that things generally work as they should, and appears compatible enough
with the current TU117 code to enable support.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
The fallthrough cases (pre-Fermi) would accidentally allow dual-link pixel
clocks even where they shouldn't be. This leads to a high resolution HDMI
displays, connected via a DVI->HDMI adapter, to fail on the original NV50.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Previously center scaling would get scaling applied to it (when it was
only supposed to center the image), and aspect-corrected scaling did not
always correctly pick whether to reduce width or height for a particular
combination of inputs/outputs.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=110660
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Higher layers tend to add a lot of modes not actually in the EDID, such
as the standard DMT modes. Changing this would be extremely intrusive to
everyone, so just force the scaler more often. There are no practical
cases we're aware of where a LVDS/eDP panel has multiple resolutions
exposed, and i915 already does it this way.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=110660
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Fix a crash or broken depth testing in all OpenGL applications that use the
depth buffer on MCP89 (GeForce 320M) seen on a MacBook Pro Late 2010.
The bug is tracked in https://bugs.freedesktop.org/show_bug.cgi?id=108500
Signed-off-by: Timo Wiren <timo.wiren@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
