cc-option-yn can be replaced with cc-option. ie.
Checking for support:
ifeq ($(call cc-option-yn,$(FLAG)),y)
becomes:
ifneq ($(call cc-option,$(FLAG)),)
Checking for lack of support:
ifeq ($(call cc-option-yn,$(FLAG)),n)
becomes:
ifeq ($(call cc-option,$(FLAG)),)
This allows us to pursue removing cc-option-yn.
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Currently, the install target in arch/sparc/Makefile descends into
arch/sparc/boot/Makefile to invoke the shell script, but there is no
good reason to do so.
arch/sparc/Makefile can run the shell script directly.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
The sh arch has a install.sh script, but no Makefile actually calls it.
Remove it to keep anyone from accidentally calling it in the future.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
When CONFIG_TRIM_UNUSED_KSYMS is enabled, I see some warnings like this:
nm: arch/x86/entry/vdso/vdso32/note.o: no symbols
$NM (both GNU nm and llvm-nm) warns when no symbol is found in the
object. Suppress the stderr.
Fangrui Song mentioned binutils>=2.37 `nm -q` can be used to suppress
"no symbols" [1], and llvm-nm>=13.0.0 supports -q as well.
We cannot use it for now, but note it as a TODO.
[1]: https://sourceware.org/bugzilla/show_bug.cgi?id=27408
Fixes: bbda5ec671 ("kbuild: simplify dependency generation for CONFIG_TRIM_UNUSED_KSYMS")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
It has been brought up a few times in various code reviews that clang
3.5 introduced -f{,no-}integrated-as as the preferred way to enable and
disable the integrated assembler, mentioning that -{no-,}integrated-as
are now considered legacy flags.
Switch the kernel over to using those variants in case there is ever a
time where clang decides to remove the non-'f' variants of the flag.
Also, fix a typo in a comment ("intergrated" -> "integrated").
Link: https://releases.llvm.org/3.5.0/tools/clang/docs/ReleaseNotes.html#new-compiler-flags
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
-Wunused-but-set-variable and -Wunused-const-variable are both disabled
for the same reason but there is a blank line between them and no blank
line between -Wno-unused-const-variable and the block.
Shuffle the new line so that it is clear that the comment applied to
both flags and the next block is separate from them.
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Whenever a warning is disabled, it is helpful for future travelers to
understand why the warning is disabled and why it is acceptable to do
so. Add a comment for -Wno-gnu so that people understand why it is
disabled.
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Turning on -Wformat does not reveal any instances of this warning across
several different builds so remove this line to keep the number of
disabled warnings as slim as possible.
This has been disabled since commit 61163efae0 ("kbuild: LLVMLinux:
Add Kbuild support for building kernel with Clang"), which does not
explain exactly why it was turned off but since it was so long ago in
terms of both the kernel and LLVM so it is possible that some bug got
fixed along the way.
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
if_changed, if_changed_dep, and if_changed_rule must have FORCE as a
prerequisite so the command line change is detected.
Documentation/kbuild/makefiles.rst clearly explains it:
Note: It is a typical mistake to forget the FORCE prerequisite.
However, not all people follow the document.
This mistake occurred again and again, so a compelling force is needed.
Show a warning if FORCE is missing in the prerequisite of if_changed
and friends. Same for filechk.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Tested-by: Nicolas Schier <n.schier@avm.de>
Add a new macro that expands into $(newer-prereqs)$(cmd-check).
It makes it easier to add common code for if_changed, if_changed_dep,
and if_changed_rule.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
With CONFIG_LTO_CLANG, we currently link modules into native
code just before modpost, which means with TRIM_UNUSED_KSYMS
enabled, we still look at the LLVM bitcode in the .o files when
generating the list of used symbols. As the bitcode doesn't
yet have calls to compiler intrinsics and llvm-nm doesn't see
function references that only exist in function-level inline
assembly, we currently need a whitelist for TRIM_UNUSED_KSYMS to
work with LTO.
This change moves module LTO linking to happen earlier, and
thus avoids the issue with LLVM bitcode and TRIM_UNUSED_KSYMS
entirely, allowing us to also drop the whitelist from
gen_autoksyms.sh.
Link: https://github.com/ClangBuiltLinux/linux/issues/1369
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Reviewed-by: Alexander Lobakin <alobakin@pm.me>
Tested-by: Alexander Lobakin <alobakin@pm.me>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
cc-option, cc-option-yn, and cc-disable-warning all invoke the compiler
during build time, and can slow down the build when these checks become
stale for our supported compilers, whose minimally supported versions
increases over time. See Documentation/process/changes.rst for the
current supported minimal versions (GCC 4.9+, clang 10.0.1+). Compiler
version support for these flags may be verified on godbolt.org.
The following flags are GCC only and supported since at least GCC 4.9.
Remove cc-option and cc-disable-warning tests.
* -fno-tree-loop-im
* -Wno-maybe-uninitialized
* -fno-reorder-blocks
* -fno-ipa-cp-clone
* -fno-partial-inlining
* -femit-struct-debug-baseonly
* -fno-inline-functions-called-once
* -fconserve-stack
The following flags are supported by all supported versions of GCC and
Clang. Remove their cc-option, cc-option-yn, and cc-disable-warning tests.
* -fno-delete-null-pointer-checks
* -fno-var-tracking
* -Wno-array-bounds
The following configs are made dependent on GCC, since they use GCC
specific flags.
* READABLE_ASM
* DEBUG_SECTION_MISMATCH
-mfentry was not supported by s390-linux-gnu-gcc until gcc-9+, add a
comment.
--param=allow-store-data-races=0 was renamed to -fno-allow-store-data-races
in the GCC 10 release; add a comment.
-Wmaybe-uninitialized (GCC specific) was being added for CONFIG_GCOV,
then again unconditionally; add it only once.
Also, base RETPOLINE_CFLAGS and RETPOLINE_VDSO_CFLAGS on CONFIC_CC_IS_*
then remove cc-option tests for Clang.
Link: https://github.com/ClangBuiltLinux/linux/issues/1436
Acked-by: Miguel Ojeda <ojeda@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Kees' post inspired me to get more involved. I still have a long way to
go in terms of mastery of GNU make, but at the least I can help with
more code review. It's also helpful for me to pick up on what's missing
from the LLVM ecosystem.
Link: https://security.googleblog.com/2021/08/linux-kernel-security-done-right.html
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Ship minimal stdarg.h (1 type, 4 macros) as <linux/stdarg.h>.
stdarg.h is the only userspace header commonly used in the kernel.
GPL 2 version of <stdarg.h> can be extracted from
http://archive.debian.org/debian/pool/main/g/gcc-4.2/gcc-4.2_4.2.4.orig.tar.gz
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Delete/fixup few includes in anticipation of global -isystem compile
option removal.
Note: crypto/aegis128-neon-inner.c keeps <stddef.h> due to redefinition
of uintptr_t error (one definition comes from <stddef.h>, another from
<linux/types.h>).
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
LLVM_IAS=1 controls enabling clang's integrated assembler via
-integrated-as. This was an explicit opt in until we could enable
assembler support in Clang for more architecures. Now we have support
and CI coverage of LLVM_IAS=1 for all architecures except a few more
bugs affecting s390 and powerpc.
This commit flips the default from opt in via LLVM_IAS=1 to opt out via
LLVM_IAS=0. CI systems or developers that were previously doing builds
with CC=clang or LLVM=1 without explicitly setting LLVM_IAS must now
explicitly opt out via LLVM_IAS=0, otherwise they will be implicitly
opted-in.
This finally shortens the command line invocation when cross compiling
with LLVM to simply:
$ make ARCH=arm64 LLVM=1
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
LLVM_IAS is the user interface to set the -(no-)integrated-as flag,
and it should be used only for that purpose.
LLVM_IAS is checked in some places to determine the assembler type,
but it is not precise.
For example,
$ make CC=gcc LLVM_IAS=1
... will use the GNU assembler (i.e. binutils) since LLVM_IAS=1 is
effective only when $(CC) is clang.
Of course, 'CC=gcc LLVM_IAS=1' is an odd combination, but the build
system can be more robust against such insane input.
Commit ba64beb174 ("kbuild: check the minimum assembler version in
Kconfig") introduced CONFIG_AS_IS_GNU/LLVM, which is more precise
because Kconfig checks the version string from the assembler in use.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
As noted by Masahiro, document how we can generally infer CROSS_COMPILE
(and the more specific details about --target and --prefix) based on
ARCH.
Change use of env vars to command line parameters.
Suggested-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Fangrui Song <maskray@google.com>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
We get constant feedback that the command line invocation of make is too
long when compiling with LLVM. CROSS_COMPILE is helpful when a toolchain
has a prefix of the target triple, or is an absolute path outside of
$PATH.
Since a Clang binary is generally multi-targeted, we can infer a given
target from SRCARCH/ARCH. If CROSS_COMPILE is not set, simply set
--target= for CLANG_FLAGS, KBUILD_CFLAGS, and KBUILD_AFLAGS based on
$SRCARCH.
Previously, we'd cross compile via:
$ ARCH=arm64 CROSS_COMPILE=aarch64-linux-gnu- make LLVM=1 LLVM_IAS=1
Now:
$ ARCH=arm64 make LLVM=1 LLVM_IAS=1
For native builds (not involving cross compilation) we now explicitly
specify a target triple rather than rely on the implicit host triple.
Link: https://github.com/ClangBuiltLinux/linux/issues/1399
Suggested-by: Arnd Bergmann <arnd@kernel.org>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Suggested-by: Masahiro Yamada <masahiroy@kernel.org>
Suggested-by: Nathan Chancellor <nathan@kernel.org>
Acked-by: Arnd Bergmann <arnd@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Acked-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
With some of the changes we'd like to make to CROSS_COMPILE, the initial
block of clang flag handling which controls things like the target triple,
whether or not to use the integrated assembler and how to find GAS,
and erroring on unknown warnings is becoming unwieldy. Move it into its
own file under scripts/.
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
It is always safe to use the same compiler for the kernel and external
modules, but in reality, some distributions such as Fedora release a
different version of GCC from the one used for building the kernel.
There was a long discussion about mixing different compilers [1].
I do not repeat it here, but at least, showing a heads up in that
case is better than nothing.
Linus suggested [2]:
And a warning might be more palatable even if different compiler
version work fine together. Just a heads up on "it looks like you
might be mixing compiler versions" is a valid note, and isn't
necessarily wrong. Even when they work well together, maybe you want
to have people at least _aware_ of it.
This commit shows a warning unless the compiler is exactly the same.
warning: the compiler differs from the one used to build the kernel
The kernel was built by: gcc (GCC) 11.1.1 20210531 (Red Hat 11.1.1-3)
You are using: gcc (GCC) 11.2.1 20210728 (Red Hat 11.2.1-1)
Check the difference, and if it is OK with you, please proceed at your
risk.
To avoid the locale issue as in commit bcbcf50f52 ("kbuild: fix
ld-version.sh to not be affected by locale"), pass LC_ALL=C to
"$(CC) --version".
[1] https://lore.kernel.org/linux-hardening/efe6b039a544da8215d5e54aa7c4b6d1986fc2b0.1611607264.git.jpoimboe@redhat.com/
[2] https://lore.kernel.org/lkml/CAHk-=wgjwhDy-y4mQh34L+2aF=n6BjzHdqAW2=8wri5x7O04pA@mail.gmail.com/
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Set the x bit to some scripts to make them directly executable.
Especially, scripts/checkdeclares.pl is not hooked by anyone.
It should be executable since it is tedious to type
'perl scripts/checkdeclares.pl'.
The original patch [1] set the x bit properly, but it was lost when
it was merged as commit 21917bded7 ("scripts: a new script for
checking duplicate struct declaration").
[1] https://lore.kernel.org/lkml/20210401110943.1010796-1-wanjiabing@vivo.com/
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
As explained in commit 3204a7fb98 ("kbuild: prefix $(srctree)/ to some
included Makefiles"), I want to stop using --include-dir some day.
I already fixed up the top Makefile, but some arch Makefiles (mips, um,
x86) still include check-in Makefiles without $(srctree)/.
Fix them up so 'need-sub-make := 1' can go away for this case.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
When merging configuration fragments, it might be of interest to
identify mismatches (redefinitions) programmatically. Hence add the
option -s (strict mode) to instruct merge_config.sh to bail out in
case any redefinition has been detected.
With strict mode, warnings are emitted as before, but the script
terminates with rc=1. If -y is set to define "builtin having
precedence over modules", fragments are still allowed to set =m (while
the base config has =y). Strict mode will tolerate that as demotions
from =y to =m are ignored when setting -y.
Signed-off-by: Matthias Maennich <maennich@google.com>
Reviewed-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
- Prevent a memory ordering issue in the timer expiry code which makes it
possible to observe falsely that the callback has been executed already
while that's not the case, which violates the guarantee of del_timer_sync().
-----BEGIN PGP SIGNATURE-----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=JQWW
-----END PGP SIGNATURE-----
Merge tag 'timers-urgent-2021-08-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fix from Thomas Gleixner:
"A single timer fix:
- Prevent a memory ordering issue in the timer expiry code which
makes it possible to observe falsely that the callback has been
executed already while that's not the case, which violates the
guarantee of del_timer_sync()"
* tag 'timers-urgent-2021-08-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
timers: Move clearing of base::timer_running under base:: Lock
- Prevent a double enqueue caused by rt_effective_prio() being invoked
twice in __sched_setscheduler().
-----BEGIN PGP SIGNATURE-----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=EZjT
-----END PGP SIGNATURE-----
Merge tag 'sched-urgent-2021-08-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fix from Thomas Gleixner:
"A single scheduler fix:
- Prevent a double enqueue caused by rt_effective_prio() being
invoked twice in __sched_setscheduler()"
* tag 'sched-urgent-2021-08-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/rt: Fix double enqueue caused by rt_effective_prio
- Correct the permission checks for perf event which send SIGTRAP to a
different process and clean up that code to be more readable.
- Prevent an out of bound MSR access in the x86 perf code which happened
due to an incomplete limiting to the actually available hardware
counters.
- Prevent access to the AMD64_EVENTSEL_HOSTONLY bit when running inside a
guest.
- Handle small core counter re-enabling correctly by issuing an ACK right
before reenabling it to prevent a stale PEBS record being kept around.
-----BEGIN PGP SIGNATURE-----
iQJHBAABCgAxFiEEQp8+kY+LLUocC4bMphj1TA10mKEFAmEPv6UTHHRnbHhAbGlu
dXRyb25peC5kZQAKCRCmGPVMDXSYob8hD/wMmRLAoc/uvJIIICJ+IQVnnU8WToIS
Qy1dAPpQMz6pQpRQor1AGpcP89IMnLVhZn84lsd+kw0/Lv630JbWsXvQ8jB2GPHn
17XewPp4l4PDUgKaGEKIjPSjsmnZmzOLTYIy5gWOfA/h5EG/1D+ozvcRGDMaXWUw
+65Pinaf2QKfjYZV11SVJMLF5zLYUxMc6vRag00WrcPxd+JO4eVeV36g0LTmhABW
fOSDcBOSVrT2w9MYDpNmPvMh3dN2vlfhrEk10NBKslx8uk4t8sV/Jbs+48WhydKa
zmdqthtjIekRUSxhiHJve70D9ngveCBSKQDp0Us2BWWxdnM0+HV6ozjuxO0julCH
5tW4413fz2AoZJhWkTn3PE4nPG3apRCnL2B+jTFHHqCjKSkkrNDRJDOEUwasXjV5
jn25DLhOq5ltkMrLFDTV/h2RZqU0fAMV2iwNSkjD3lVLgKt6B3/uSnvE9SXmaJjs
njk/1LzeWwY+sk7YYXouPQ2STEDCKvOJGYZSS5pFA03mVaQgfuJxpyHKH+7nj9tV
k0FLDLMmSucYIWBq0iapa8cR69e0ZIE48hSNR3AOIIOVh3LusmA4HkogOAQG7kdZ
P2nKQUdN+SR8rL9KQRauP63J508fg0kkXNgSAm1lFWBDnFKt6shkkHGcL+5PzxJW
1Bjx2wc52Ww84A==
=hhv+
-----END PGP SIGNATURE-----
Merge tag 'perf-urgent-2021-08-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fixes from Thomas Gleixner:
"A set of perf fixes:
- Correct the permission checks for perf event which send SIGTRAP to
a different process and clean up that code to be more readable.
- Prevent an out of bound MSR access in the x86 perf code which
happened due to an incomplete limiting to the actually available
hardware counters.
- Prevent access to the AMD64_EVENTSEL_HOSTONLY bit when running
inside a guest.
- Handle small core counter re-enabling correctly by issuing an ACK
right before reenabling it to prevent a stale PEBS record being
kept around"
* tag 'perf-urgent-2021-08-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/intel: Apply mid ACK for small core
perf/x86/amd: Don't touch the AMD64_EVENTSEL_HOSTONLY bit inside the guest
perf/x86: Fix out of bound MSR access
perf: Refactor permissions check into perf_check_permission()
perf: Fix required permissions if sigtrap is requested
Here are some small char/misc driver fixes for 5.14-rc5.
They resolve a few regressions that people reported:
- acrn driver fix
- fpga driver fix
- interconnect tiny driver fixes
All have been in linux-next for a while with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYQ+oWw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymihQCglZZdlg1HFVLx6zBvIR5cOAODRwkAoJgOMVnl
ngKziJBQqPHbT1KE49Uz
=jFHY
-----END PGP SIGNATURE-----
Merge tag 'char-misc-5.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver fixes from Greg KH:
"Here are some small char/misc driver fixes for 5.14-rc5.
They resolve a few regressions that people reported:
- acrn driver fix
- fpga driver fix
- interconnect tiny driver fixes
All have been in linux-next for a while with no reported issues"
* tag 'char-misc-5.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
interconnect: Fix undersized devress_alloc allocation
interconnect: qcom: icc-rpmh: Add BCMs to commit list in pre_aggregate
interconnect: qcom: icc-rpmh: Ensure floor BW is enforced for all nodes
fpga: dfl: fme: Fix cpu hotplug issue in performance reporting
virt: acrn: Do hcall_destroy_vm() before resource release
interconnect: Always call pre_aggregate before aggregate
interconnect: Zero initial BW after sync-state
Here are 3 tiny driver core and firmware loader fixes for 5.14-rc5.
They are:
- driver core fix for when probing fails
- firmware loader fixes for reported problems.
All have been in linux-next for a while with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYQ+8JQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymIQwCfYqUdpxPvUxe6/EWlOVLm6cpUASgAoI2rWoo9
ot6ywUCioFv4ehVzVtKc
=c5WG
-----END PGP SIGNATURE-----
Merge tag 'driver-core-5.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core fixes from Greg KH:
"Here are three tiny driver core and firmware loader fixes for
5.14-rc5. They are:
- driver core fix for when probing fails
- firmware loader fixes for reported problems.
All have been in linux-next for a while with no reported issues"
* tag 'driver-core-5.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
firmware_loader: fix use-after-free in firmware_fallback_sysfs
firmware_loader: use -ETIMEDOUT instead of -EAGAIN in fw_load_sysfs_fallback
drivers core: Fix oops when driver probe fails
Here are a few small staging driver fixes for 5.14-rc5 to resolve some
reported problems. They include:
- mt7621 driver fix
- rtl8723bs driver fixes
- rtl8712 driver fixes.
Nothing major, just small problems resolved.
All have been in linux-next for a while with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYQ+9kQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylsOwCcDMdcfuu1KI/gwuUwqvYqe+tJ8cUAn3oQSwV7
aGb+wVJbgoXM0MFknrdA
=B3Gi
-----END PGP SIGNATURE-----
Merge tag 'staging-5.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging driver fixes from Greg KH:
"Here are a few small staging driver fixes for 5.14-rc5 to resolve some
reported problems. They include:
- mt7621 driver fix
- rtl8723bs driver fixes
- rtl8712 driver fixes.
Nothing major, just small problems resolved.
All have been in linux-next for a while with no reported issues"
* tag 'staging-5.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: mt7621-pci: avoid to re-disable clock for those pcies not in use
staging: rtl8712: error handling refactoring
staging: rtl8712: get rid of flush_scheduled_work
staging: rtl8723bs: select CONFIG_CRYPTO_LIB_ARC4
staging: rtl8723bs: Fix a resource leak in sd_int_dpc
Here are some small tty/serial driver fixes for 5.14-rc5 to resolve a
number of reported problems.
They include:
- mips serial driver fixes
- 8250 driver fixes for reported problems
- fsl_lpuart driver fixes
- other tiny driver fixes
All have been in linux-next for a while with no reported problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYQ++cg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylzoQCcC2zlnRRex48ovvh/b4JtKgImP6IAn2wR2Ag+
tSpMfooJBaT5a9kcg+Vr
=U7hC
-----END PGP SIGNATURE-----
Merge tag 'tty-5.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial fixes from Greg KH:
"Here are some small tty/serial driver fixes for 5.14-rc5 to resolve a
number of reported problems.
They include:
- mips serial driver fixes
- 8250 driver fixes for reported problems
- fsl_lpuart driver fixes
- other tiny driver fixes
All have been in linux-next for a while with no reported problems"
* tag 'tty-5.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
serial: 8250_pci: Avoid irq sharing for MSI(-X) interrupts.
serial: 8250_mtk: fix uart corruption issue when rx power off
tty: serial: fsl_lpuart: fix the wrong return value in lpuart32_get_mctrl
serial: 8250_pci: Enumerate Elkhart Lake UARTs via dedicated driver
serial: 8250: fix handle_irq locking
serial: tegra: Only print FIFO error message when an error occurs
MIPS: Malta: Do not byte-swap accesses to the CBUS UART
serial: 8250: Mask out floating 16/32-bit bus bits
serial: max310x: Unprepare and disable clock in error path
Here are some small USB driver fixes for 5.14-rc5. They resolve a
number of small reported issues, including:
- cdnsp driver fixes
- usb serial driver fixes and device id updates
- usb gadget hid fixes
- usb host driver fixes
- usb dwc3 driver fixes
- other usb gadget driver fixes
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYQ+/ow8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymdLACeMlXNPA5S/YJd+vak0Oer1mjNQWkAoJAZKLEN
bvN1v5wYjPs0mIFJUwj0
=xb57
-----END PGP SIGNATURE-----
Merge tag 'usb-5.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB driver fixes from Greg KH:
"Here are some small USB driver fixes for 5.14-rc5. They resolve a
number of small reported issues, including:
- cdnsp driver fixes
- usb serial driver fixes and device id updates
- usb gadget hid fixes
- usb host driver fixes
- usb dwc3 driver fixes
- other usb gadget driver fixes
All of these have been in linux-next for a while with no reported
issues"
* tag 'usb-5.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (21 commits)
usb: typec: tcpm: Keep other events when receiving FRS and Sourcing_vbus events
usb: dwc3: gadget: Avoid runtime resume if disabling pullup
usb: dwc3: gadget: Use list_replace_init() before traversing lists
USB: serial: ftdi_sio: add device ID for Auto-M3 OP-COM v2
USB: serial: pl2303: fix GT type detection
USB: serial: option: add Telit FD980 composition 0x1056
USB: serial: pl2303: fix HX type detection
USB: serial: ch341: fix character loss at high transfer rates
usb: cdnsp: Fix the IMAN_IE_SET and IMAN_IE_CLEAR macro
usb: cdnsp: Fixed issue with ZLP
usb: cdnsp: Fix incorrect supported maximum speed
usb: cdns3: Fixed incorrect gadget state
usb: gadget: f_hid: idle uses the highest byte for duration
Revert "thunderbolt: Hide authorized attribute if router does not support PCIe tunnels"
usb: otg-fsm: Fix hrtimer list corruption
usb: host: ohci-at91: suspend/resume ports after/before OHCI accesses
usb: musb: Fix suspend and resume issues for PHYs on I2C and SPI
usb: gadget: f_hid: added GET_IDLE and SET_IDLE handlers
usb: gadget: f_hid: fixed NULL pointer dereference
usb: gadget: remove leaked entry from udc driver list
...
-----BEGIN PGP SIGNATURE-----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=FAeG
-----END PGP SIGNATURE-----
Merge tag 'io_uring-5.14-2021-08-07' of git://git.kernel.dk/linux-block
Pull io_uring from Jens Axboe:
"A few io-wq related fixes:
- Fix potential nr_worker race and missing max_workers check from one
path (Hao)
- Fix race between worker exiting and new work queue (me)"
* tag 'io_uring-5.14-2021-08-07' of git://git.kernel.dk/linux-block:
io-wq: fix lack of acct->nr_workers < acct->max_workers judgement
io-wq: fix no lock protection of acct->nr_worker
io-wq: fix race between worker exiting and activating free worker
* A fix to avoid dereferencing a null task pointer while walking the
stack.
* A fix to the memory size in the HiFive Unleashed device tree.
* A fix to disable stack protectors when randstruct is enabled, which
results in non-deterministic offsets during module builds.
* A pair of fixes to avoid relying on a constant physical memory base
for the non-XIP builds.
-----BEGIN PGP SIGNATURE-----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=yf+K
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-5.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Palmer Dabbelt:
- avoid dereferencing a null task pointer while walking the stack
- fix the memory size in the HiFive Unleashed device tree
- disable stack protectors when randstruct is enabled, which results in
non-deterministic offsets during module builds
- a pair of fixes to avoid relying on a constant physical memory base
for the non-XIP builds
* tag 'riscv-for-linus-5.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
Revert "riscv: Remove CONFIG_PHYS_RAM_BASE_FIXED"
riscv: Get rid of CONFIG_PHYS_RAM_BASE in kernel physical address conversion
riscv: Disable STACKPROTECTOR_PER_TASK if GCC_PLUGIN_RANDSTRUCT is enabled
riscv: dts: fix memory size for the SiFive HiFive Unmatched
riscv: stacktrace: Fix NULL pointer dereference
- Correct the Extended Regular Expressions in tools
- Adjust scripts/checkversion.pl for the current Kbuild
- Unset sub_make_done for 'make install' to make DKMS working again
-----BEGIN PGP SIGNATURE-----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=M+2q
-----END PGP SIGNATURE-----
Merge tag 'kbuild-fixes-v5.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- Correct the Extended Regular Expressions in tools
- Adjust scripts/checkversion.pl for the current Kbuild
- Unset sub_make_done for 'make install' to make DKMS work again
* tag 'kbuild-fixes-v5.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kbuild: cancel sub_make_done for the install target to fix DKMS
scripts: checkversion: modernize linux/version.h search strings
mips: Fix non-POSIX regexp
x86/tools/relocs: Fix non-POSIX regexp
This reverts commit 9b79878ced.
The removal of this config exposes CONFIG_PHYS_RAM_BASE for all kernel
types: this value being implementation-specific, this breaks the
genericity of the RISC-V kernel so revert it.
Signed-off-by: Alexandre Ghiti <alex@ghiti.fr>
Tested-by: Emil Renner Berthing <kernel@esmil.dk>
Reviewed-by: Jisheng Zhang <jszhang@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
The usage of CONFIG_PHYS_RAM_BASE for all kernel types was a mistake:
this value is implementation-specific and this breaks the genericity of
the RISC-V kernel.
Fix this by introducing a new variable phys_ram_base that holds this
value at runtime and use it in the kernel physical address conversion
macro. Since this value is used only for XIP kernels, evaluate it only if
CONFIG_XIP_KERNEL is set which in addition optimizes this macro for
standard kernels at compile-time.
Signed-off-by: Alexandre Ghiti <alex@ghiti.fr>
Tested-by: Emil Renner Berthing <kernel@esmil.dk>
Reviewed-by: Jisheng Zhang <jszhang@kernel.org>
Fixes: 44c9225729 ("RISC-V: enable XIP")
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
The kyber ioscheduler calls trace_block_rq_insert() *after* the request
is added to the queue but the documentation for trace_block_rq_insert()
says that the call should be made *before* the request is added to the
queue. Move the tracepoint for the kyber ioscheduler so that it is
consistent with the documentation.
Signed-off-by: Vincent Fu <vincent.fu@samsung.com>
Link: https://lore.kernel.org/r/20210804194913.10497-1-vincent.fu@samsung.com
Reviewed by: Adam Manzanares <a.manzanares@samsung.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEK2m5VNv+CHkogTfJ8vlZVpUNgaMFAmENbm0ACgkQ8vlZVpUN
gaNEEQf7B8GXPqJvRgqhJwCdqmZqz8DB7dfjqT0SB99f1EL3VoeHEvo+yEgMqD3L
cSYRFh4efEHgr51HSZoIPINqcU9hs86SvFmjd6jWIcnY/EJLd0g3e8aEWpJ3S5rR
3avSC4tiDbn34GgDeoR2DFG6RsGbRxDUEEzkrd8h7Hx6q39s3aXdi89lBmBe8rg/
lIVaeivZrZ7SfY/YFEziF0P7KurJNju6lGwqm0xAqu79J9QaabXMF1u5GPjUi2rw
TIaLMSP6O5VQbQwskcTIhJlKSAB4aUIB+fMV5Zi2cCXAKGdzK24xdM5VbzOeKAAX
1EwOE9GEyytpxD1P0zb8vVGsJW3wjQ==
=hQAS
-----END PGP SIGNATURE-----
Merge tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 fixes from Ted Ts'o:
"A regression fix, bug fix, and a comment cleanup for ext4"
* tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: fix potential htree corruption when growing large_dir directories
ext4: remove conflicting comment from __ext4_forget
ext4: fix potential uninitialized access to retval in kmmpd
As callbacks to a tracepoint are paired with the data that is passed in when
the callback is registered to the tracepoint, it must have that data passed
to the callback when the tracepoint is triggered, else bad things will
happen. To keep the two together, they are both assigned to a tracepoint
structure and added to an array. The tracepoint call site will dereference
the structure (via RCU) and call the callback in that structure along with
the data in that structure. This keeps the callback and data tightly
coupled.
Because of the overhead that retpolines have on tracepoint callbacks, if
there's only one callback attached to a tracepoint (a common case), then it
is called via a static call (code modified to do a direct call instead of an
indirect call). But to implement this, the data had to be decoupled from the
callback, as now the callback is implemented via a direct call from the
static call and not an indirect call from the dereferenced structure.
Note, the static call only calls a callback used when there's a single
callback attached to the tracepoint. If more than one callback is attached
to the same tracepoint, then the static call will call an iterator
function that goes back to dereferencing the structure keeping the callback
and its data tightly coupled again.
Issues can arise when going from 0 callbacks to one, as the static call is
assigned to the callback, and it must take care that the data passed to it
is loaded before the static call calls the callback. Going from 1 to 2
callbacks is not an issue, as long as the static call is updated to the
iterator before the tracepoint structure array is updated via RCU. Going
from 2 to more or back down to 2 is not an issue as the iterator can handle
all theses cases. But going from 2 to 1, care must be taken as the static
call is now calling a callback and the data that is loaded must be the data
for that callback.
Care was taken to ensure the callback and data would be in-sync, but after
a bug was reported, it became clear that not enough was done to make sure
that was the case. These changes address this.
The first change is to compare the old and new data instead of the old and
new callback, as it's the data that can corrupt the callback, even if the
callback is the same (something getting freed).
The next change is to convert these transitions into states, to make it
easier to know when a synchronization is needed, and to perform those
synchronizations. The problem with this patch is that it slows down
disabling all events from under a second, to making it take over 10 seconds
to do the same work. But that is addressed in the final patch.
The final patch uses the RCU state functions to keep track of the RCU state
between the transitions, and only needs to perform the synchronization if an
RCU synchronization hasn't been done already. This brings the performance of
disabling all events back to its original value. That's because no
synchronization is required between disabling tracepoints but is required
when enabling a tracepoint after its been disabled. If an RCU
synchronization happens after the tracepoint is disabled, and before it is
re-enabled, there's no need to do the synchronization again.
Both the second and third patch have subtle complexities that they are
separated into two patches. But because the second patch causes such a
regression in performance, the third patch adds a "Fixes" tag to the second
patch, such that the two must be backported together and not just the second
patch.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCYQ15TBQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qnmmAP4hoA34CDr5hrd8mYLeKptW63f5Nd1w
fVZjprfa1wJhZAEAq39OeRCT4Fb2hIeZNBNUnLU90f+J6NH5QFDEhW+CkAI=
=JcZS
-----END PGP SIGNATURE-----
Merge tag 'trace-v5.14-rc4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fixes from Steven Rostedt:
"Fix tracepoint race between static_call and callback data
As callbacks to a tracepoint are paired with the data that is passed
in when the callback is registered to the tracepoint, it must have
that data passed to the callback when the tracepoint is triggered,
else bad things will happen. To keep the two together, they are both
assigned to a tracepoint structure and added to an array. The
tracepoint call site will dereference the structure (via RCU) and call
the callback in that structure along with the data in that structure.
This keeps the callback and data tightly coupled.
Because of the overhead that retpolines have on tracepoint callbacks,
if there's only one callback attached to a tracepoint (a common case),
then it is called via a static call (code modified to do a direct call
instead of an indirect call). But to implement this, the data had to
be decoupled from the callback, as now the callback is implemented via
a direct call from the static call and not an indirect call from the
dereferenced structure.
Note, the static call only calls a callback used when there's a single
callback attached to the tracepoint. If more than one callback is
attached to the same tracepoint, then the static call will call an
iterator function that goes back to dereferencing the structure
keeping the callback and its data tightly coupled again.
Issues can arise when going from 0 callbacks to one, as the static
call is assigned to the callback, and it must take care that the data
passed to it is loaded before the static call calls the callback.
Going from 1 to 2 callbacks is not an issue, as long as the static
call is updated to the iterator before the tracepoint structure array
is updated via RCU. Going from 2 to more or back down to 2 is not an
issue as the iterator can handle all theses cases. But going from 2 to
1, care must be taken as the static call is now calling a callback and
the data that is loaded must be the data for that callback.
Care was taken to ensure the callback and data would be in-sync, but
after a bug was reported, it became clear that not enough was done to
make sure that was the case. These changes address this.
The first change is to compare the old and new data instead of the old
and new callback, as it's the data that can corrupt the callback, even
if the callback is the same (something getting freed).
The next change is to convert these transitions into states, to make
it easier to know when a synchronization is needed, and to perform
those synchronizations. The problem with this patch is that it slows
down disabling all events from under a second, to making it take over
10 seconds to do the same work. But that is addressed in the final
patch.
The final patch uses the RCU state functions to keep track of the RCU
state between the transitions, and only needs to perform the
synchronization if an RCU synchronization hasn't been done already.
This brings the performance of disabling all events back to its
original value. That's because no synchronization is required between
disabling tracepoints but is required when enabling a tracepoint after
its been disabled. If an RCU synchronization happens after the
tracepoint is disabled, and before it is re-enabled, there's no need
to do the synchronization again.
Both the second and third patch have subtle complexities that they are
separated into two patches. But because the second patch causes such a
regression in performance, the third patch adds a "Fixes" tag to the
second patch, such that the two must be backported together and not
just the second patch"
* tag 'trace-v5.14-rc4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracepoint: Use rcu get state and cond sync for static call updates
tracepoint: Fix static call function vs data state mismatch
tracepoint: static call: Compare data on transition from 2->1 callees
Fix a recent regression in the timer events oriented (TEO) cpuidle
governor causing it to misbehave when idle state 0 is disabled and
rename two local variables for improved clarity on top of that.
-----BEGIN PGP SIGNATURE-----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=CPqq
-----END PGP SIGNATURE-----
Merge tag 'pm-5.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"Fix a recent regression in the timer events oriented (TEO) cpuidle
governor causing it to misbehave when idle state 0 is disabled and
rename two local variables for improved clarity on top of that"
* tag 'pm-5.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpuidle: teo: Rename two local variables in teo_select()
cpuidle: teo: Fix alternative idle state lookup
Revert a recent ACPICA commit causing boot issues to appear on some
systems.
-----BEGIN PGP SIGNATURE-----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=TD4+
-----END PGP SIGNATURE-----
Merge tag 'acpi-5.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fix from Rafael Wysocki:
"Revert a recent ACPICA commit causing boot issues to appear on some
systems"
* tag 'acpi-5.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
Revert "ACPICA: Fix memory leak caused by _CID repair function"
Lots of small fixes for Arm SoCs this time, nothing
too worrying:
- omap/beaglebone boot regression fix in gpt12 timer
- revert for i.mx8 soc driver breaking as a platform_driver
- kexec/kdump fixes for op-tee
- various fixes for incorrect DT settings on imx, mvebu, omap,
stm32, and tegra causing problems.
- device tree fixes for static checks in nomadik, versatile, stm32
- code fixes for issues found in build testing and with static
checking on tegra, ixp4xx, imx, omap
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----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=h0YB
-----END PGP SIGNATURE-----
Merge tag 'soc-fixes-5.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"Lots of small fixes for Arm SoCs this time, nothing too worrying:
- omap/beaglebone boot regression fix in gpt12 timer
- revert for i.mx8 soc driver breaking as a platform_driver
- kexec/kdump fixes for op-tee
- various fixes for incorrect DT settings on imx, mvebu, omap, stm32,
and tegra causing problems.
- device tree fixes for static checks in nomadik, versatile, stm32
- code fixes for issues found in build testing and with static
checking on tegra, ixp4xx, imx, omap"
* tag 'soc-fixes-5.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (36 commits)
soc: ixp4xx/qmgr: fix invalid __iomem access
soc: ixp4xx: fix printing resources
ARM: ixp4xx: goramo_mlr depends on old PCI driver
ARM: ixp4xx: fix compile-testing soc drivers
soc/tegra: Make regulator couplers depend on CONFIG_REGULATOR
ARM: dts: nomadik: Fix up interrupt controller node names
ARM: dts: stm32: Fix touchscreen IRQ line assignment on DHCOM
ARM: dts: stm32: Disable LAN8710 EDPD on DHCOM
ARM: dts: stm32: Prefer HW RTC on DHCOM SoM
omap5-board-common: remove not physically existing vdds_1v8_main fixed-regulator
ARM: dts: am437x-l4: fix typo in can@0 node
ARM: dts: am43x-epos-evm: Reduce i2c0 bus speed for tps65218
bus: ti-sysc: AM3: RNG is GP only
ARM: omap2+: hwmod: fix potential NULL pointer access
arm64: dts: armada-3720-turris-mox: remove mrvl,i2c-fast-mode
arm64: dts: armada-3720-turris-mox: fixed indices for the SDHC controllers
ARM: dts: imx: Swap M53Menlo pinctrl_power_button/pinctrl_power_out pins
ARM: imx: fix missing 3rd argument in macro imx_mmdc_perf_init
ARM: dts: colibri-imx6ull: limit SDIO clock to 25MHz
arm64: dts: ls1028: sl28: fix networking for variant 2
...
- Fix extension/truncation of return values from 32-bit system calls
- Fix interaction between unwinding and tracing
- Fix spurious toolchain warning emitted during make
- Fix Kconfig help text for RANDOMIZE_MODULE_REGION_FULL
-----BEGIN PGP SIGNATURE-----
iQFEBAABCgAuFiEEPxTL6PPUbjXGY88ct6xw3ITBYzQFAmENI3EQHHdpbGxAa2Vy
bmVsLm9yZwAKCRC3rHDchMFjND+yB/95tpp4xswHHjM9CGaBsupVesgnA0DUINPf
mUWiB5TEYdG0jbB5yOV/VJhjN4nXLpvOJna0RUses3VKXK75v88X1Zha74AKBBD+
3GKu768nXZFHOJT4zMQJ0N8642m4XHFSeyeHxiJk6zxPsvU9O27/UxkyxZ2RCKPq
4av/yK3JBac1eqKWSdhZ3spms43WtmikoaPdL1dLLbH2lBRCTbFuo7zhVmrl9MuZ
tpkoLkgW6I+Tquck0//F7jRjxdeQEMWNIV+hybm36VDuYe5EbKRQCetdksJsXBml
CiADCPh2JshAfkygtTrZTKd4uo1/rHQPvmJ9ZhR7oQZlEsaVuosw
=zi/m
-----END PGP SIGNATURE-----
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
"It's all pretty minor but the main fix is sorting out how we deal with
return values from 32-bit system calls as audit expects error codes to
be sign-extended to 64 bits
Summary:
- Fix extension/truncation of return values from 32-bit system calls
- Fix interaction between unwinding and tracing
- Fix spurious toolchain warning emitted during make
- Fix Kconfig help text for RANDOMIZE_MODULE_REGION_FULL"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: stacktrace: avoid tracing arch_stack_walk()
arm64: stacktrace: fix comment
arm64: fix the doc of RANDOMIZE_MODULE_REGION_FULL
arm64: move warning about toolchains to archprepare
arm64: fix compat syscall return truncation
