The ->ring_idx_mask variable is a u64 so static checkers, Smatch in
this case, complain if the BIT() is not also a u64.
drivers/gpu/drm/virtio/virtgpu_ioctl.c:50 virtio_gpu_fence_event_create()
warn: should '(1 << ring_idx)' be a 64 bit type?
Fixes: cd7f5ca335 ("drm/virtio: implement context init: add virtio_gpu_fence_event")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Chia-I Wu <olvaffe@gmail.com>
Link: http://patchwork.freedesktop.org/patch/msgid/YygN7jY0GdUSQSy0@kili
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Since qxl_io_reset(qdev) will be called immediately
after qxl_ring_create() been called,
and parameter like notify_on_prod will be set to default value.
So the call to qxl_ring_init_hdr() before becomes meaningless.
Signed-off-by: Zongmin Zhou<zhouzongmin@kylinos.cn>
Suggested-by: Ming Xie<xieming@kylinos.cn>
Link: http://patchwork.freedesktop.org/patch/msgid/20220920065023.1633303-1-zhouzongmin@kylinos.cn
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Add comments on the lt8912_write_lvds_config() config to document the
current settings and to make it clear that this is a hardcoded
configuration not relevant for the HDMI output (could be removed without
affecting the HDMI port).
No changes on the actual register writes.
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
Acked-by: Adrien Grassein <adrien.grassein@gmail.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220922124306.34729-5-dev@pschenker.ch
A user reported that when he starts a game (MTGA) with wine,
he observed an error msg failed to pin framebuffer with error -12.
Found an issue with the VRAM mem type eviction decision condition
logic. This patch will fix the if condition code error.
Gitlab bug link:
https://gitlab.freedesktop.org/drm/amd/-/issues/2159
Fixes: ded910f368 ("drm/amdgpu: Implement intersect/compatible functions")
Signed-off-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220922151447.265696-1-Arunpravin.PaneerSelvam@amd.com
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
If the copy of the description string from userspace fails, then the page
for the instance descriptor doesn't get freed before returning -EFAULT,
which leads to a memleak.
Fixes: 7a7a933edd ("drm/vmwgfx: Introduce VMware mks-guest-stats")
Signed-off-by: Rafael Mendonca <rafaelmendsr@gmail.com>
Reviewed-by: Martin Krastev <krastevm@vmware.com>
Signed-off-by: Zack Rusin <zackr@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220916204751.720716-1-rafaelmendsr@gmail.com
The implementation of strscpy() is more robust and safer.
That's now the recommended way to copy NUL terminated strings.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Minghao Chi <chi.minghao@zte.com.cn>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220919030401.211331-1-chi.minghao@zte.com.cn
Provide DRM_PLANE_NON_ATOMIC_FUNCS, which initializes plane functions
of non-atomic drivers to default values. The macro is not supposed to
be used in new code, but helps with documenting and finding existing
users.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Lyude Paul <lyude@redhat.com> # nouveau
Link: https://patchwork.freedesktop.org/patch/msgid/20220909105947.6487-5-tzimmermann@suse.de
The plane update and disable helpers are only useful for non-atomic
drivers. Print a warning if an atomic driver calls them.
Suggested-by: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220909105947.6487-4-tzimmermann@suse.de
Provide drm_univeral_plane_alloc() to allocate and initialize a
plane. Code for non-atomic drivers uses this pattern. Convert them to
the new function. The modeset helpers contain a quirk for handling their
color formats differently. Set the flag outside plane allocation.
The new function is already deprecated to some extend. Drivers should
rather use drmm_univeral_plane_alloc() or drm_universal_plane_init().
v2:
* kerneldoc fixes (Javier)
* grammar fixes in commit message
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com> # nouveau
Link: https://patchwork.freedesktop.org/patch/msgid/20220909105947.6487-3-tzimmermann@suse.de
Open-code drm_plane_init() and remove the function from DRM. The
implementation of drm_plane_init() is a simple wrapper around a call
to drm_universal_plane_init(), so drivers can just use that instead.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Lyude Paul <lyude@redhat.com> # nouveau
Acked-by: Jyri Sarha <jyri.sarha@iki.fi>
Link: https://patchwork.freedesktop.org/patch/msgid/20220909105947.6487-2-tzimmermann@suse.de
Revert this patch since it depends on devicetree functionality that
previously has been reverted in the below commit.
commit e798ba3374 ("Revert "dt-bindings: Add byteswap order to chrontel ch7033"")
This reverts commit ce9564cfc9.
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220919102009.150503-3-robert.foss@linaro.org
This commit was accidentally reverted instead of another commit, and
therefore needs to be reinstated.
This reverts commit 8c9c40ec83.
Fixes: 8c9c40ec83 ("Revert "drm/bridge: ti-sn65dsi86: Implement bridge connector operations for DP"")
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220919102009.150503-2-robert.foss@linaro.org
mtk_dp_driver is only used in mtk_dp.c now, change it
to static.
Fixes: f70ac097a2 ("drm/mediatek: Add MT8195 Embedded DisplayPort driver")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Acked-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220913134929.1970187-1-yangyingliang@huawei.com
Some definitions in mtk_dp_reg.h are not used, so remove these
redundant codes.
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Acked-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220916133821.27980-3-rex-bc.chen@mediatek.com
In order to improve human readability, reduce the indentation by
returning early if the dp/edp cable is not plugged in.
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Acked-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220916133821.27980-2-rex-bc.chen@mediatek.com
On machines without an Intel video opregion the acpi_video driver
immediately probes the ACPI video bus and used to also immediately
register acpi_video# backlight devices when supported.
Once the drm/kms driver then loaded later and possibly registered
a native backlight device then the drivers/acpi/video_detect.c code
unregistered the acpi_video0 device to avoid there being 2 backlight
devices (when acpi_video_get_backlight_type()==native).
This means that userspace used to briefly see 2 devices and the
disappearing of acpi_video0 after a brief time confuses the systemd
backlight level save/restore code, see e.g.:
https://bbs.archlinux.org/viewtopic.php?id=269920
To fix this the ACPI video code has been modified to make backlight class
device registration a separate step, relying on the drm/kms driver to
ask for the acpi_video backlight registration after it is done setting up
its native backlight device.
Add a call to the new acpi_video_register_backlight() function after
setting up the gma500's native backlight, so that the acpi_video backlight
device gets registered on systems where the gma500's native backlight
device is not registered.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220917205920.647212-6-hdegoede@redhat.com
Before this commit when we want userspace to use the acpi_video backlight
device we register both the GPU's native backlight device and acpi_video's
firmware acpi_video# backlight device. This relies on userspace preferring
firmware type backlight devices over native ones.
Registering 2 backlight devices for a single display really is
undesirable, don't register the GPU's native backlight device when
another backlight device should be used.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220917205920.647212-5-hdegoede@redhat.com
Use backlight_get_brightness() instead of directly referencing
bd->props.brightness. This will take backlight_is_blank() into account,
properly setting brightness to 0 when screen-blanking has been requested
through the backlight sysfs interface.
Suggested-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220917205920.647212-4-hdegoede@redhat.com
Change the type for the registered backlight class device from platform
to raw/native.
The poulsbo/cedarview/oaktrail backlight support is using native GPU
backlight control and as such the type should be raw (aka native) as
is done by all the other native GPU backlight driver code.
Note this will not change much from userspace's point of view.
poulsbo/cedarview laptops typically offer both an ACPI-video
backlight interface as well as the native GPU backlight interface.
The /sys/class/backlight/acpi_video0 has a type of firmware and
userspace typically looks for firmware devices before looking
for platform devices. The typical standard lookup order is:
firmware -> platform -> raw
This means that both before and after this change typical userspace
backlight consumers (sich as e.g. GNOME) will prefer the firmware
acpi_video0 backlight device.
This has been tested on a Packard Bell Dot SC (Intel Atom N2600, cedarview)
and a Sony Vaio vpc-x11s1e (Intel N540, poulsbo) laptop.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220917205920.647212-3-hdegoede@redhat.com
Refactor backlight support so that the gma_backlight_enable() /
gma_backlight_disable() / gma_backlight_set() functions used by
the Opregion handle will also work if no backlight_device gets
registered.
This is a preparation patch for not registering the gma500's own backlight
device when acpi_video should be used, since registering 2 backlight
devices for a single display really is undesirable.
Since the acpi-video interface often uses the OpRegion we need to keep
the OpRegion functional even when dev_priv->backlight_device is NULL.
As a result of this refactor the actual backlight_device_register()
call is moved to the shared backlight.c code and all #ifdefs related to
CONFIG_BACKLIGHT_CLASS_DEVICE are now also limited to backlight.c .
No functional changes intended.
This has been tested on a Packard Bell Dot SC (Intel Atom N2600, cedarview)
and a Sony Vaio vpc-x11s1e (Intel N540, poulsbo) laptop.
Changes in v2:
- Fix unused variable warnings when CONFIG_BACKLIGHT is not selected by
marking the 2 variables as __maybe_unused.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220917205920.647212-2-hdegoede@redhat.com
The psb_runtime_suspend/resume/thaw/freeze/restore functions are all
just 1:1 wrappers around gma_power_suspend/_resume.
Drop these wrappers and use the DEFINE_RUNTIME_DEV_PM_OPS() macro to
define the dev_pm_ops struct.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220909115646.99920-7-hdegoede@redhat.com
Rewrite the power.c code. For some reason this was doing locking +
refcounting + state (suspended or not) bookkeeping all by itself.
But there is no reason for this, this is all taken care of by
the runtime-pm core, through pm_runtime_get()/_put().
Besides this not being necessary the DIY code is also quite weird/
buggy in some places. E.g. power_begin() would manually do a resume
when not resumed already and force_on=true, followed by a
pm_runtime_get(), which will cause a call to gma_power_resume() to
get scheduled which would redo the entire resume again. Which can
all be replaced by a single pm_runtime_get_sync() call.
Note that this is just a cleanup, this does not actually fix
the (disabled through #if 0) runtime-pm support. It does now call
pm_runtime_enable(), but only after doing a pm_runtime_get() at
probe-time, so the device is never runtime suspended.
Doing this permanent get() + enable() instead of not calling
enable() at all is necessary for the pm_runtime_get_if_in_use() call
in gma_power_begin() to work properly.
Note this also removes the gma_power_is_on() call a check like this
without actually holding a reference is always racy, so it is a bad
idea (and therefor has no pm_runtime_foo() equivalent).
The 2 code paths which were using gma_power_is_on() are actually both
guaranteed to only run when the device is powered-on so the 2 checks
can simply be dropped.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220909115646.99920-6-hdegoede@redhat.com
Fix gnome-shell (and other page-flip users) hanging after suspend/resume
because of the gma500's IRQs not working.
This fixes 2 problems with the IRQ handling:
1. gma_power_off() calls gma_irq_uninstall() which does a free_irq(), but
gma_power_on() called gma_irq_preinstall() + gma_irq_postinstall() which
do not call request_irq. Replace the pre- + post-install calls with
gma_irq_install() which does prep + request + post.
2. After fixing 1. IRQs still do not work on a Packard Bell Dot SC (Intel
Atom N2600, cedarview) netbook.
Cederview uses MSI interrupts and it seems that the BIOS re-configures
things back to normal APIC based interrupts during S3 suspend. There is
some MSI PCI-config registers save/restore code which tries to deal with
this, but on the Packard Bell Dot SC this is not sufficient to restore
MSI IRQ functionality after a suspend/resume.
Replace the PCI-config registers save/restore with pci_disable_msi() on
suspend + pci_enable_msi() on resume. Fixing e.g. gnome-shell hanging.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220906203852.527663-4-hdegoede@redhat.com
(cherry picked from commit 235fdbc32d)
This device is another x86 gaming handheld, and as (hopefully) there is
only one set of DMI IDs it's using DMI_EXACT_MATCH
Signed-off-by: Maya Matuszczyk <maccraft123mc@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220803182402.1217293-1-maccraft123mc@gmail.com
Provides a default plane state check handler for primary planes that are a
fullscreen scanout buffer and whose state scale and position can't change.
There are some drivers that duplicate this logic in their helpers, such as
simpledrm and ssd130x. Factor out this common code into a plane helper and
make drivers use it.
Suggested-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20220913162307.121503-1-javierm@redhat.com
Using the parent fence instead of the finished fence
to get the job status. This change is to avoid GPU
scheduler timeout error which can cause GPU reset.
Signed-off-by: Arvind Yadav <Arvind.Yadav@amd.com>
Reviewed-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220914164321.2156-6-Arvind.Yadav@amd.com
Signed-off-by: Christian König <christian.koenig@amd.com>
Here's setting software signaling bit for the stub fence
which is always signaled. If this fence signaling bit is
not set then the AMD GPU scheduler will cause a GPU reset
due to a GPU scheduler cleanup activity timeout.
Signed-off-by: Arvind Yadav <Arvind.Yadav@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220914164321.2156-3-Arvind.Yadav@amd.com
Signed-off-by: Christian König <christian.koenig@amd.com>
Remove the signaled bit status check because it is returning
early when the fence is already signaled and
__dma_fence_enable_signaling is checking the status of signaled
bit again.
Signed-off-by: Arvind Yadav <Arvind.Yadav@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220914164321.2156-2-Arvind.Yadav@amd.com
Signed-off-by: Christian König <christian.koenig@amd.com>
cppcheck reports
[drivers/gpu/drm/rockchip/rockchip_drm_vop.c:186]: (style) The function 'vop_writel' is never used.
vop_writel is static function that is not used, so remove it.
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20220521190716.1936193-1-trix@redhat.com
The RK3399 has a 1024-entry gamma LUT with 10 bits per component on its
"big" VOP and a 256-entry, 8 bit per component LUT on the "little" VOP.
Compared to the RK3288, it no longer requires disabling gamma while
updating the LUT. On the RK3399, the LUT can be updated at any time as
the hardware has two LUT buffers, one can be written while the other is
in use. A swap of the buffers is triggered by writing 1 to the
update_gamma_lut register.
Signed-off-by: Hugh Cole-Baker <sigmaris@gmail.com>
Tested-by: "Milan P. Stanić" <mps@arvanta.net>
Tested-by: Linus Heckemann <git@sphalerite.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20211019215843.42718-3-sigmaris@gmail.com
The VOP on RK3399 has a different approach from previous versions for
setting a gamma lookup table, using an update_gamma_lut register. As
this differs from RK3288, give RK3399 its own set of "common" register
definitions.
Signed-off-by: Hugh Cole-Baker <sigmaris@gmail.com>
Tested-by: "Milan P. Stanić" <mps@arvanta.net>
Tested-by: Linus Heckemann <git@sphalerite.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20211019215843.42718-2-sigmaris@gmail.com
With the introduction of KUnit, IGT is no longer the only option to run
the DRM unit tests, as the tests can be run through kunit-tool or on
real hardware with CONFIG_KUNIT.
Therefore, remove the "igt_" prefix from the tests and replace it with
the "drm_test_" prefix, making the tests' names independent from the tool
used.
Signed-off-by: Maíra Canal <mairacanal@riseup.net>
Acked-by: David Gow <davidgow@google.com>
Acked-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20220911191756.203118-2-mairacanal@riseup.net
The igt_check_drm_framebuffer_create is based on a loop that executes
tests for all createbuffer_tests test cases. This could be better
represented by parameterized tests, provided by KUnit.
So, convert the igt_check_drm_framebuffer_create into parameterized tests.
Signed-off-by: Maíra Canal <mairacanal@riseup.net>
Reviewed-by: Michał Winiarski <michal.winiarski@intel.com>
Reviewed-by: David Gow <davidgow@google.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220911191756.203118-1-mairacanal@riseup.net