[ Upstream commit e5467359a7 ]
The Gru-Bob board does not have a pull-up resistor on its
WLAN_HOST_WAKE# pin, but Kevin does. The production/vendor kernel
specified the pin configuration correctly as a pull-up, but this didn't
get ported correctly to upstream.
This means Bob's WLAN_HOST_WAKE# pin is floating, causing inconsistent
wakeup behavior.
Note that bt_host_wake_l has a similar dynamic, but apparently the
upstream choice was to redundantly configure both internal and external
pull-up on Kevin (see the "Kevin has an external pull up" comment in
rk3399-gru.dtsi). This doesn't cause any functional problem, although
it's perhaps wasteful.
Fixes: 8559bbeeb8 ("arm64: dts: rockchip: add Google Bob")
Signed-off-by: Brian Norris <briannorris@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20220822164453.1.I75c57b48b0873766ec993bdfb7bc1e63da5a1637@changeid
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit d4955c0ad7 upstream.
cpufreq_get_hw_max_freq() returns max frequency in kHz as *unsigned int*,
while freq_inv_set_max_ratio() gets passed this frequency in Hz as 'u64'.
Multiplying max frequency by 1000 can potentially result in overflow --
multiplying by 1000ULL instead should avoid that...
Found by Linux Verification Center (linuxtesting.org) with the SVACE static
analysis tool.
Fixes: cd0ed03a89 ("arm64: use activity monitors for frequency invariance")
Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Link: https://lore.kernel.org/r/01493d64-2bce-d968-86dc-11a122a9c07d@omp.ru
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 422ab8fe15 ]
The MHU secure interrupt exists physically but is missing in the DT node.
Specify the interrupt in DT node to fix a warning on Arm Juno board:
mhu@2b1f0000: interrupts: [[0, 36, 4], [0, 35, 4]] is too short
Link: https://lore.kernel.org/r/20220801141005.599258-1-jassisinghbrar@gmail.com
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8b023accc8 ]
While looking into a bug related to the compiler's handling of addresses
of labels, I noticed some uses of _THIS_IP_ seemed unused in lockdep.
Drive by cleanup.
-Wunused-parameter:
kernel/locking/lockdep.c:1383:22: warning: unused parameter 'ip'
kernel/locking/lockdep.c:4246:48: warning: unused parameter 'ip'
kernel/locking/lockdep.c:4844:19: warning: unused parameter 'ip'
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Waiman Long <longman@redhat.com>
Link: https://lore.kernel.org/r/20220314221909.2027027-1-ndesaulniers@google.com
Stable-dep-of: 54c3931957 ("tracing: hold caller_addr to hardirq_{enable,disable}_ip")
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit e89d120c4b upstream.
The AMU counter AMEVCNTR01 (constant counter) should increment at the same
rate as the system counter. On affected Cortex-A510 cores, AMEVCNTR01
increments incorrectly giving a significantly higher output value. This
results in inaccurate task scheduler utilization tracking and incorrect
feedback on CPU frequency.
Work around this problem by returning 0 when reading the affected counter
in key locations that results in disabling all users of this counter from
using it either for frequency invariance or as FFH reference counter. This
effect is the same to firmware disabling affected counters.
Details on how the two features are affected by this erratum:
- AMU counters will not be used for frequency invariance for affected
CPUs and CPUs in the same cpufreq policy. AMUs can still be used for
frequency invariance for unaffected CPUs in the system. Although
unlikely, if no alternative method can be found to support frequency
invariance for affected CPUs (cpufreq based or solution based on
platform counters) frequency invariance will be disabled. Please check
the chapter on frequency invariance at
Documentation/scheduler/sched-capacity.rst for details of its effect.
- Given that FFH can be used to fetch either the core or constant counter
values, restrictions are lifted regarding any of these counters
returning a valid (!0) value. Therefore FFH is considered supported
if there is a least one CPU that support AMUs, independent of any
counters being disabled or affected by this erratum. Clarifying
comments are now added to the cpc_ffh_supported(), cpu_read_constcnt()
and cpu_read_corecnt() functions.
The above is achieved through adding a new erratum: ARM64_ERRATUM_2457168.
Signed-off-by: Ionela Voinescu <ionela.voinescu@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: James Morse <james.morse@arm.com>
Link: https://lore.kernel.org/r/20220819103050.24211-1-ionela.voinescu@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c0a454b904 upstream.
GCC does not insert a `bti c` instruction at the beginning of a function
when it believes that all callers reach the function through a direct
branch[1]. Unfortunately the logic it uses to determine this is not
sufficiently robust, for example not taking account of functions being
placed in different sections which may be loaded separately, so we may
still see thunks being generated to these functions. If that happens,
the first instruction in the callee function will result in a Branch
Target Exception due to the missing landing pad.
While this has currently only been observed in the case of modules
having their main code loaded sufficiently far from their init section
to require thunks it could potentially happen for other cases so the
safest thing is to disable BTI for the kernel when building with an
affected toolchain.
[1]: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=106671
Reported-by: D Scott Phillips <scott@os.amperecomputing.com>
[Bits of the commit message are lifted from his report & workaround]
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220905142255.591990-1-broonie@kernel.org
Cc: <stable@vger.kernel.org> # v5.10+
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This reverts commit add4bc9281.
On Mon, Sep 12, 2022 at 10:52:45AM +0100, Catalin Marinas wrote:
>I missed this (holidays) and it looks like it's in stable already. On
>its own it will likely break kasan_hw if used together with user-space
>MTE as this change relies on two previous commits:
>
>70c248aca9e7 ("mm: kasan: Skip unpoisoning of user pages")
>6d05141a3930 ("mm: kasan: Skip page unpoisoning only if __GFP_SKIP_KASAN_UNPOISON")
>
>The reason I did not cc stable is that there are other dependencies in
>this area. The potential issues without the above commits were rather
>theoretical, so take these patches rather as clean-ups/refactoring than
>fixes.
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e75d18cecb ]
Though acpi_find_last_cache_level() always returned signed value and the
document states it will return any errors caused by lack of a PPTT table,
it never returned negative values before.
Commit 0c80f9e165 ("ACPI: PPTT: Leave the table mapped for the runtime usage")
however changed it by returning -ENOENT if no PPTT was found. The value
returned from acpi_find_last_cache_level() is then assigned to unsigned
fw_level.
It will result in the number of cache leaves calculated incorrectly as
a huge value which will then cause the following warning from __alloc_pages
as the order would be great than MAX_ORDER because of incorrect and huge
cache leaves value.
| WARNING: CPU: 0 PID: 1 at mm/page_alloc.c:5407 __alloc_pages+0x74/0x314
| Modules linked in:
| CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.19.0-10393-g7c2a8d3ac4c0 #73
| pstate: 20000005 (nzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
| pc : __alloc_pages+0x74/0x314
| lr : alloc_pages+0xe8/0x318
| Call trace:
| __alloc_pages+0x74/0x314
| alloc_pages+0xe8/0x318
| kmalloc_order_trace+0x68/0x1dc
| __kmalloc+0x240/0x338
| detect_cache_attributes+0xe0/0x56c
| update_siblings_masks+0x38/0x284
| store_cpu_topology+0x78/0x84
| smp_prepare_cpus+0x48/0x134
| kernel_init_freeable+0xc4/0x14c
| kernel_init+0x2c/0x1b4
| ret_from_fork+0x10/0x20
Fix the same by changing fw_level to be signed integer and return the
error from init_cache_level() early in case of error.
Reported-and-Tested-by: Bruno Goncalves <bgoncalv@redhat.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Link: https://lore.kernel.org/r/20220808084640.3165368-1-sudeep.holla@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 39fdb65f52 upstream.
Cortex-A510 is affected by an erratum where in rare circumstances the
CPUs may not handle a race between a break-before-make sequence on one
CPU, and another CPU accessing the same page. This could allow a store
to a page that has been unmapped.
Work around this by adding the affected CPUs to the list that needs
TLB sequences to be done twice.
Signed-off-by: James Morse <james.morse@arm.com>
Link: https://lore.kernel.org/r/20220704155732.21216-1-james.morse@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Lucas Wei <lucaswei@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5e1e087457 upstream.
Since commit 51f559d665 ("arm64: Enable repeat tlbi workaround on KRYO4XX
gold CPUs"), we failed to detect erratum 1286807 on Cortex-A76 because its
entry in arm64_repeat_tlbi_list[] was accidently corrupted by this commit.
Fix this issue by creating a separate entry for Kryo4xx Gold.
Fixes: 51f559d665 ("arm64: Enable repeat tlbi workaround on KRYO4XX gold CPUs")
Cc: Shreyas K K <quic_shrekk@quicinc.com>
Signed-off-by: Zenghui Yu <yuzenghui@huawei.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220809043848.969-1-yuzenghui@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit b10d86fb8e ]
KVM does not support AArch32 EL0 on asymmetric systems. To that end,
prevent userspace from configuring a vCPU in such a state through
setting PSTATE.
It is already ABI that KVM rejects such a write on a system where
AArch32 EL0 is unsupported. Though the kernel's definition of a 32bit
system changed in commit 2122a83331 ("arm64: Allow mismatched
32-bit EL0 support"), KVM's did not.
Fixes: 2122a83331 ("arm64: Allow mismatched 32-bit EL0 support")
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220816192554.1455559-3-oliver.upton@linux.dev
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f3c6efc72f ]
KVM does not support AArch32 on asymmetric systems. To that end, enforce
AArch64-only behavior on PMCR_EL1.LC when on an asymmetric system.
Fixes: 2122a83331 ("arm64: Allow mismatched 32-bit EL0 support")
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220816192554.1455559-2-oliver.upton@linux.dev
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1c3ace2b8b ]
Although harmless, the return statement in kvm_unexpected_el2_exception
is rather confusing as the function itself has a void return type. The
C standard is also pretty clear that "A return statement with an
expression shall not appear in a function whose return type is void".
Given that this return statement does not seem to add any actual value,
let's not pointlessly violate the standard.
Build-tested with GCC 10 and CLANG 13 for good measure, the disassembled
code is identical with or without the return statement.
Fixes: e9ee186bb7 ("KVM: arm64: Add kvm_extable for vaxorcism code")
Signed-off-by: Quentin Perret <qperret@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220705142310.3847918-1-qperret@google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fac76f2260 ]
Otherwise, we could fail to compile.
ld: arch/arm64/crypto/ghash-ce-glue.o: in function 'ghash_ce_mod_exit':
ghash-ce-glue.c:(.exit.text+0x24): undefined reference to 'crypto_unregister_aead'
ld: arch/arm64/crypto/ghash-ce-glue.o: in function 'ghash_ce_mod_init':
ghash-ce-glue.c:(.init.text+0x34): undefined reference to 'crypto_register_aead'
Fixes: 537c1445ab ("crypto: arm64/gcm - implement native driver using v8 Crypto Extensions")
Signed-off-by: Qian Cai <quic_qiancai@quicinc.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 58577966a4 ]
Currently the DT for QCS404 SoC has setup for 2 USB2 PHYs with one each
assigned to USB3 controller and USB2 controller. This assignment is
incorrect which only works by luck: as when each USB HCI comes up it
configures the *other* controllers PHY which is enough to make them
happy. If, for any reason, we were to disable one of the controllers then
both would stop working.
This was a difficult inconsistency to be caught which was found while
trying to enable USB support in u-boot. So with all the required drivers
ported to u-boot, I couldn't get the same USB storage device enumerated
in u-boot which was being enumerated fine by the kernel.
The root cause of the problem came out to be that I wasn't enabling USB2
PHY: "usb2_phy_prim" in u-boot. Then I realised that via simply disabling
the same USB2 PHY currently assigned to USB2 host controller in the
kernel disabled enumeration for USB3 host controller as well.
So fix this inconsistency by correctly assigning USB2 PHYs.
Fixes: 9375e7d719 ("arm64: dts: qcom: qcs404: Add USB devices and PHYs")
Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220711083038.1518529-1-sumit.garg@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b415bb7c97 ]
Hook SDMMC1 CD up with CVM GPIO02 (SOC_GPIO11) used for card detection on J4
(uSD socket) on the carrier.
Fixes: ef633bfc21 ("arm64: tegra: Enable card detect for SD card on P2888")
Signed-off-by: Tamás Szűcs <tszucs@protonmail.ch>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 61192a9d8a ]
The Tegra SYSRAM contains regions access to which is restricted to
certain hardware blocks on the system, and speculative accesses to
those will cause issues.
Patch 'misc: sram: Only map reserved areas in Tegra SYSRAM' attempted
to resolve this by only mapping the regions specified in the device
tree on the assumption that there are no such restricted areas within
the 64K-aligned area of memory that contains the memory we wish to map.
Turns out this assumption is wrong, as there are such areas above the
4K pages described in the device trees. As such, we need to use the
bigger hammer that is no-memory-wc, which causes the memory to be
mapped as Device memory to which speculative accesses are disallowed.
As such, the previous patch in the series,
'firmware: tegra: bpmp: do only aligned access to IPC memory area',
is required with this patch to make the BPMP driver only issue aligned
memory accesses as those are also required with Device memory.
Fixes: fec29bf049 ("misc: sram: Only map reserved areas in Tegra SYSRAM")
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Reviewed-by: Yousaf Kaukab <ykaukab@suse.de>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 98094be152 ]
On final Tegra234 systems, shared memory for communication with BPMP is
located at offset 0x70000 in SYSRAM.
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7fa307524a ]
The json-schema bindings for SRAM expect the nodes to be called "sram"
rather than "sysram" or "shmem". Furthermore, place the brackets around
the SYSRAM references such that a two-element array is created rather
than a two-element array nested in a single-element array. This is not
relevant for device tree itself, but allows the nodes to be properly
validated against json-schema bindings.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c98e6e6836 ]
The bananapi R64 (BPI-R64) experiences wrong WPS button signals.
In OpenWrt pushing the WPS button while powering on the device will set
it to recovery mode. Currently, this also happens without any user
interaction. In particular, the wrong signals appear while booting the
device or restarting it, e.g. after doing a system upgrade. If the
device is in recovery mode the user needs to manually power cycle or
restart it.
The official BPI-R64 sources set the WPS button to GPIO_ACTIVE_LOW in
the device tree. This setting seems to suppress the unwanted WPS button
press signals. So this commit changes the button from GPIO_ACTIVE_HIGH to
GPIO_ACTIVE_LOW.
The official BPI-R64 sources can be found on
https://github.com/BPI-SINOVOIP/BPI-R64-openwrt
Fixes: 0b6286dd96 ("arm64: dts: mt7622: add bananapi BPI-R64 board")
Suggested-by: INAGAKI Hiroshi <musashino.open@gmail.com>
Signed-off-by: Nick Hainke <vincent@systemli.org>
Link: https://lore.kernel.org/r/20220630111746.4098-1-vincent@systemli.org
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cbfb5668ae ]
According to qcom,sm6125-pinctrl.yaml all nodes inside the tlmm must be
suffixed by -state:
qcom/sm6125-sony-xperia-seine-pdx201.dtb: pinctrl@500000: 'sdc2-off', 'sdc2-on' do not match any of the regexes: '-state$', 'pinctrl-[0-9]+'
The label names have been updated to match, going from sdc2_state_X to
sdc2_X_state.
Fixes: cff4bbaf2a ("arm64: dts: qcom: Add support for SM6125")
Fixes: 82e1783890 ("arm64: dts: qcom: sm6125: Add support for Sony Xperia 10II")
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220508100336.127176-2-marijn.suijten@somainline.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6990640a93 ]
Both the sdc2-on and sdc2-off pinctrl nodes are used by the
sdhci@4784000 node in sm6125.dtsi. Surprisingly sdc2-off is defined in
sm6125, yet its sdc2-on counterpart is only defined in board-specific DT
for the Sony Seine PDX201 board/device resulting in an "undefined label
&sdc2_state_on" error if sm6125.dtsi were included elsewhere.
This sm6125 base dtsi should not rely on externally defined labels; the
properties referencing it should then also be written externally.
Since the sdc2-on pin configuration is board-independent just like
sdc2-off, move it from seine-pdx201.dts into sm6125.dtsi.
The SDCard-detect pin (gpio98) is however board-specific, and remains as
an overwrite in seine-pdx201.dts for both the on and off state.
As a drive-by cleanup, reorder bias- and drive-strength properties.
Fixes: cff4bbaf2a ("arm64: dts: qcom: Add support for SM6125")
Fixes: 82e1783890 ("arm64: dts: qcom: sm6125: Add support for Sony Xperia 10II")
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220508100336.127176-1-marijn.suijten@somainline.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5458d6f282 ]
The smem-state properties for the pronto node were incorrectly labelled,
reading `qcom,state*` rather than `qcom,smem-state*`. Fix that, allowing
the stop state to be used.
Fixes: 88106096cb ("ARM: dts: msm8916: Add and enable wcnss node")
Signed-off-by: Sireesh Kodali <sireeshkodali1@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220526141740.15834-3-sireeshkodali1@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3cd1c4f41d ]
ICC path for the GPU incorrectly states <&gnoc 1 &bimc 5>, which is
a path from SLAVE_GNOC_BIMC to SLAVE_EBI. According to the downstream
kernel sources, the GPU uses MASTER_OXILI here, which is equivalent to
<&bimc 1 ...>.
While we are at it, use defined names instead of the numbers for this
interconnect path.
Fixes: 5cf69dcbec ("arm64: dts: qcom: sdm630: Add Adreno 508 GPU configuration")
Reported-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220521202708.1509308-8-dmitry.baryshkov@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1c04791976 ]
The SoC's device tree file disables gpucc and adreno's SMMU by default.
So let's disable the GPU too. Moreover it looks like SMMU might be not
usable without additional patches (which means that GPU is unusable
too). No board uses GPU at this moment.
Fixes: 5cf69dcbec ("arm64: dts: qcom: sdm630: Add Adreno 508 GPU configuration")
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220521202708.1509308-4-dmitry.baryshkov@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e60414644c ]
We don't use this carveout on trogdor boards, and having it defined in
the sc7180 SoC file causes an overlap message to be printed at boot.
OF: reserved mem: OVERLAP DETECTED!
memory@86000000 (0x0000000086000000--0x000000008ec00000) overlaps with memory@8b700000 (0x000000008b700000--0x000000008b710000)
Delete the node in the trogdor dtsi file to fix the overlap problem and
remove the error message.
Cc: Alex Elder <elder@linaro.org>
Cc: Matthias Kaehlcke <mka@chromium.org>
Fixes: 310b266655 ("arm64: dts: qcom: sc7180: define ipa_fw_mem node")
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220517193307.3034602-1-swboyd@chromium.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 506506cad3 ]
Commit b20d1ba3cf ("arm64: cpufeature: allow for version discrepancy in
PMU implementations") made it possible to run Linux on a machine with PMUs
with different versions without tainting the kernel. The patch relaxed the
restriction only for the ID_AA64DFR0_EL1.PMUVer field, and missed doing the
same for ID_DFR0_EL1.PerfMon , which also reports the PMU version, but for
the AArch32 state.
For example, with Linux running on two clusters with different PMU
versions, the kernel is tainted when bringing up secondaries with the
following message:
[ 0.097027] smp: Bringing up secondary CPUs ...
[..]
[ 0.142805] Detected PIPT I-cache on CPU4
[ 0.142805] CPU features: SANITY CHECK: Unexpected variation in SYS_ID_DFR0_EL1. Boot CPU: 0x00000004011088, CPU4: 0x00000005011088
[ 0.143555] CPU features: Unsupported CPU feature variation detected.
[ 0.143702] GICv3: CPU4: found redistributor 10000 region 0:0x000000002f180000
[ 0.143702] GICv3: CPU4: using allocated LPI pending table @0x00000008800d0000
[ 0.144888] CPU4: Booted secondary processor 0x0000010000 [0x410fd0f0]
The boot CPU implements FEAT_PMUv3p1 (ID_DFR0_EL1.PerfMon, bits 27:24, is
0b0100), but CPU4, part of the other cluster, implements FEAT_PMUv3p4
(ID_DFR0_EL1.PerfMon = 0b0101).
Treat the PerfMon field as FTR_NONSTRICT and FTR_EXACT to pass the sanity
check and to match how PMUVer is treated for the 64bit ID register.
Fixes: b20d1ba3cf ("arm64: cpufeature: allow for version discrepancy in PMU implementations")
Signed-off-by: Alexandru Elisei <alexandru.elisei@arm.com>
Link: https://lore.kernel.org/r/20220617111332.203061-1-alexandru.elisei@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3381da254f ]
Due to an oversight, on arm64 lockdep IRQ state tracking doesn't work as
intended in NMI context. This demonstrably results in bogus warnings
from lockdep, and in theory could mask a variety of issues.
On arm64, we've consistently tracked IRQ flag state for NMIs (and
saved/restored the state of the interrupted context) since commit:
f0cd5ac1e4 ("arm64: entry: fix NMI {user, kernel}->kernel transitions")
That commit fixed most lockdep issues with NMI by virtue of the
save/restore of the lockdep state of the interrupted context. However,
for lockdep IRQ state tracking to consistently take effect in NMI
context it has been necessary to select TRACE_IRQFLAGS_NMI_SUPPORT since
commit:
ed00495333 ("locking/lockdep: Fix TRACE_IRQFLAGS vs. NMIs")
As arm64 does not select TRACE_IRQFLAGS_NMI_SUPPORT, this means that the
lockdep state can be stale in NMI context, and some uses of that state
can consume stale data.
When an NMI is taken arm64 entry code will call arm64_enter_nmi(). This
will enter NMI context via __nmi_enter() before calling
lockdep_hardirqs_off() to inform lockdep that IRQs have been masked.
Where TRACE_IRQFLAGS_NMI_SUPPORT is not selected, lockdep_hardirqs_off()
will not update lockdep state if called in NMI context. Thus if IRQs
were enabled in the original context, lockdep will continue to believe
that IRQs are enabled despite the call to lockdep_hardirqs_off().
However, the lockdep_assert_*() checks do take effect in NMI context,
and will consume the stale lockdep state. If an NMI is taken from a
context which had IRQs enabled, and during the handling of the NMI
something calls lockdep_assert_irqs_disabled(), this will result in a
spurious warning based upon the stale lockdep state.
This can be seen when using perf with GICv3 pseudo-NMIs. Within the perf
NMI handler we may attempt a uaccess to record the userspace callchain,
and is this faults the el1_abort() call in the nested context will call
exit_to_kernel_mode() when returning, which has a
lockdep_assert_irqs_disabled() assertion:
| # ./perf record -a -g sh
| ------------[ cut here ]------------
| WARNING: CPU: 0 PID: 164 at arch/arm64/kernel/entry-common.c:73 exit_to_kernel_mode+0x118/0x1ac
| Modules linked in:
| CPU: 0 PID: 164 Comm: perf Not tainted 5.18.0-rc5 #1
| Hardware name: linux,dummy-virt (DT)
| pstate: 004003c5 (nzcv DAIF +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
| pc : exit_to_kernel_mode+0x118/0x1ac
| lr : el1_abort+0x80/0xbc
| sp : ffff8000080039f0
| pmr_save: 000000f0
| x29: ffff8000080039f0 x28: ffff6831054e4980 x27: ffff683103adb400
| x26: 0000000000000000 x25: 0000000000000001 x24: 0000000000000001
| x23: 00000000804000c5 x22: 00000000000000c0 x21: 0000000000000001
| x20: ffffbd51e635ec44 x19: ffff800008003a60 x18: 0000000000000000
| x17: ffffaadf98d23000 x16: ffff800008004000 x15: 0000ffffd14f25c0
| x14: 0000000000000000 x13: 00000000000018eb x12: 0000000000000040
| x11: 000000000000001e x10: 000000002b820020 x9 : 0000000100110000
| x8 : 000000000045cac0 x7 : 0000ffffd14f25c0 x6 : ffffbd51e639b000
| x5 : 00000000000003e5 x4 : ffffbd51e58543b0 x3 : 0000000000000001
| x2 : ffffaadf98d23000 x1 : ffff6831054e4980 x0 : 0000000100110000
| Call trace:
| exit_to_kernel_mode+0x118/0x1ac
| el1_abort+0x80/0xbc
| el1h_64_sync_handler+0xa4/0xd0
| el1h_64_sync+0x74/0x78
| __arch_copy_from_user+0xa4/0x230
| get_perf_callchain+0x134/0x1e4
| perf_callchain+0x7c/0xa0
| perf_prepare_sample+0x414/0x660
| perf_event_output_forward+0x80/0x180
| __perf_event_overflow+0x70/0x13c
| perf_event_overflow+0x1c/0x30
| armv8pmu_handle_irq+0xe8/0x160
| armpmu_dispatch_irq+0x2c/0x70
| handle_percpu_devid_fasteoi_nmi+0x7c/0xbc
| generic_handle_domain_nmi+0x3c/0x60
| gic_handle_irq+0x1dc/0x310
| call_on_irq_stack+0x2c/0x54
| do_interrupt_handler+0x80/0x94
| el1_interrupt+0xb0/0xe4
| el1h_64_irq_handler+0x18/0x24
| el1h_64_irq+0x74/0x78
| lockdep_hardirqs_off+0x50/0x120
| trace_hardirqs_off+0x38/0x214
| _raw_spin_lock_irq+0x98/0xa0
| pipe_read+0x1f8/0x404
| new_sync_read+0x140/0x150
| vfs_read+0x190/0x1dc
| ksys_read+0xdc/0xfc
| __arm64_sys_read+0x20/0x30
| invoke_syscall+0x48/0x114
| el0_svc_common.constprop.0+0x158/0x17c
| do_el0_svc+0x28/0x90
| el0_svc+0x60/0x150
| el0t_64_sync_handler+0xa4/0x130
| el0t_64_sync+0x19c/0x1a0
| irq event stamp: 483
| hardirqs last enabled at (483): [<ffffbd51e636aa24>] _raw_spin_unlock_irqrestore+0xa4/0xb0
| hardirqs last disabled at (482): [<ffffbd51e636acd0>] _raw_spin_lock_irqsave+0xb0/0xb4
| softirqs last enabled at (468): [<ffffbd51e5216f58>] put_cpu_fpsimd_context+0x28/0x70
| softirqs last disabled at (466): [<ffffbd51e5216ed4>] get_cpu_fpsimd_context+0x0/0x5c
| ---[ end trace 0000000000000000 ]---
Note that as lockdep_assert_irqs_disabled() uses WARN_ON_ONCE(), and
this uses a BRK, the warning is logged with the real PSTATE at the time
of the warning, which clearly has DAIF.I set, meaning IRQs (and
pseudo-NMIs) were definitely masked and the warning is spurious.
Fix this by selecting TRACE_IRQFLAGS_NMI_SUPPORT such that the existing
entry tracking takes effect, as we had originally intended when the
arm64 entry code was fixed for transitions to/from NMI.
Arguably the lockdep_assert_*() functions should have the same NMI
checks as the rest of the code to prevent spurious warnings when
TRACE_IRQFLAGS_NMI_SUPPORT is not selected, but the real fix for any
architecture is to explicitly handle the transitions to/from NMI in the
entry code.
Fixes: f0cd5ac1e4 ("arm64: entry: fix NMI {user, kernel}->kernel transitions")
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20220511131733.4074499-3-mark.rutland@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2e599740f7 ]
The entry-method property of the idle-states node should be "psci" as
described in the idle-states binding, since this is already the value of
enable-method in the CPU nodes. Fix it to get rid of a dtbs_check
warning.
Fixes: 9260918d3a ("arm64: dts: mt8192: Add cpu-idle-states")
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220617233150.2466344-3-nfraprado@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 399e23ad51 ]
Tweak the name of the idle-states subnodes so that they follow the
binding pattern, getting rid of dtbs_check warnings.
Only the usage of "-" in the name was necessary, but "off" was also
exchanged for "sleep" since that seems to be a more common wording in
other dts files.
Fixes: 9260918d3a ("arm64: dts: mt8192: Add cpu-idle-states")
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220617233150.2466344-2-nfraprado@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 62e8a53431 ]
"make dtbs_check":
arch/arm64/boot/dts/renesas/r8a774c0-cat874.dtb: thermal-zones: cpu-thermal:thermal-sensors: [[74], [0]] is too long
arch/arm64/boot/dts/renesas/r8a774c0-ek874.dtb: thermal-zones: cpu-thermal:thermal-sensors: [[79], [0]] is too long
arch/arm64/boot/dts/renesas/r8a774c0-ek874-idk-2121wr.dtb: thermal-zones: cpu-thermal:thermal-sensors: [[82], [0]] is too long
arch/arm64/boot/dts/renesas/r8a774c0-ek874-mipi-2.1.dtb: thermal-zones: cpu-thermal:thermal-sensors: [[87], [0]] is too long
arch/arm64/boot/dts/renesas/r8a77990-ebisu.dtb: thermal-zones: cpu-thermal:thermal-sensors: [[105], [0]] is too long
From schema: Documentation/devicetree/bindings/thermal/thermal-zones.yaml
Indeed, the thermal sensors on R-Car E3 and RZ/G2E support only a single
zone, hence #thermal-sensor-cells = <0>.
Fix this by dropping the bogus zero cell from the thermal sensor
specifiers.
Fixes: 8fa7d18f9e ("arm64: dts: renesas: r8a77990: Create thermal zone to support IPA")
Fixes: 8438bfda9d ("arm64: dts: renesas: r8a774c0: Create thermal zone to support IPA")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Link: https://lore.kernel.org/r/28b812fdd1fc3698311fac984ab8b91d3d655c1c.1655301684.git.geert+renesas@glider.be
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7512af9f78 ]
Currently there are two nodes named "regulator_camera". This causes the
former to be overwritten by the latter.
Fix this by renaming them to unique names, using the preferred hyphen
instead of an underscore.
While at it, update the name of the audio regulator (which was added in
the same commit) to use a hyphen.
Fixes: a1d8a344f1 ("arm64: dts: renesas: Introduce r8a774a1-beacon-rzg2m-kit")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/a9ac82bdf108162487289d091c53a9b3de393f13.1652263918.git.geert+renesas@glider.be
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b8eb2df19f ]
"status" does not match any pattern in the gpio-leds binding. Rename the
node to the preferred pattern. This fixes a `make dtbs_check` error.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20220702132816.46456-1-samuel@sholland.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b39961659f ]
Per schema it should be nand-controller@79b0000 instead of nand@79b0000.
Fix it to match nand-controller.yaml requirements.
Signed-off-by: Robert Marko <robimarko@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220621120642.518575-1-robimarko@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 20794545c1 ]
This reverts commit e5b8d92189.
Pages mapped in user-space with PROT_MTE have the allocation tags either
zeroed or copied/restored to some user values. In order for the kernel
to access such pages via page_address(), resetting the tag in
page->flags was necessary. This tag resetting was deferred to
set_pte_at() -> mte_sync_page_tags() but it can race with another CPU
reading the flags (via page_to_virt()):
P0 (mte_sync_page_tags): P1 (memcpy from virt_to_page):
Rflags!=0xff
Wflags=0xff
DMB (doesn't help)
Wtags=0
Rtags=0 // fault
Since now the post_alloc_hook() function resets the page->flags tag when
unpoisoning is skipped for user pages (including the __GFP_ZEROTAGS
case), revert the arm64 commit calling page_kasan_tag_reset().
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Peter Collingbourne <pcc@google.com>
Reviewed-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Acked-by: Andrey Konovalov <andreyknvl@gmail.com>
Link: https://lore.kernel.org/r/20220610152141.2148929-5-catalin.marinas@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit af483947d4 ]
emulation_proc_handler() changes table->data for proc_dointvec_minmax
and can generate the following Oops if called concurrently with itself:
| Unable to handle kernel NULL pointer dereference at virtual address 0000000000000010
| Internal error: Oops: 96000006 [#1] SMP
| Call trace:
| update_insn_emulation_mode+0xc0/0x148
| emulation_proc_handler+0x64/0xb8
| proc_sys_call_handler+0x9c/0xf8
| proc_sys_write+0x18/0x20
| __vfs_write+0x20/0x48
| vfs_write+0xe4/0x1d0
| ksys_write+0x70/0xf8
| __arm64_sys_write+0x20/0x28
| el0_svc_common.constprop.0+0x7c/0x1c0
| el0_svc_handler+0x2c/0xa0
| el0_svc+0x8/0x200
To fix this issue, keep the table->data as &insn->current_mode and
use container_of() to retrieve the insn pointer. Another mutex is
used to protect against the current_mode update but not for retrieving
insn_emulation as table->data is no longer changing.
Co-developed-by: hewenliang <hewenliang4@huawei.com>
Signed-off-by: hewenliang <hewenliang4@huawei.com>
Signed-off-by: Haibin Zhang <haibinzhang@tencent.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20220128090324.2727688-1-hewenliang4@huawei.com
Link: https://lore.kernel.org/r/9A004C03-250B-46C5-BF39-782D7551B00E@tencent.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit de6921856f ]
Enable tracing of the execve*() system calls with the
syscalls:sys_exit_execve tracepoint by removing the call to
forget_syscall() when starting a new thread and preserving the value of
regs->syscallno across exec.
Signed-off-by: Francis Laniel <flaniel@linux.microsoft.com>
Link: https://lore.kernel.org/r/20220608162447.666494-2-flaniel@linux.microsoft.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit fe17b91a77 upstream.
An interrupt for USB device are shared with USB host. Set interrupt-names
property to common "dwc_usb3" instead of "host" and "peripheral".
Cc: stable@vger.kernel.org
Fixes: d7b9beb830 ("arm64: dts: uniphier: Add USB3 controller nodes")
Reported-by: Ryuta NAKANISHI <nakanishi.ryuta@socionext.com>
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ This issue was fixed upstream by accident in c3cee924bd ("arm64:
head: cover entire kernel image in initial ID map") as part of a
large refactoring of the arm64 boot flow. This simple fix is therefore
preferred for -stable backporting ]
On a system that implements FEAT_EPAN, read/write access to the idmap
is denied because UXN is not set on the swapper PTEs. As a result,
idmap_kpti_install_ng_mappings panics the kernel when accessing
__idmap_kpti_flag. Fix it by setting UXN on these PTEs.
Fixes: 18107f8a2d ("arm64: Support execute-only permissions with Enhanced PAN")
Cc: <stable@vger.kernel.org> # 5.15
Link: https://linux-review.googlesource.com/id/Ic452fa4b4f74753e54f71e61027e7222a0fae1b1
Signed-off-by: Peter Collingbourne <pcc@google.com>
Acked-by: Will Deacon <will@kernel.org>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20220719234909.1398992-1-pcc@google.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7ae19d422c upstream.
A kasan error was reported during fuzzing:
BUG: KASAN: slab-out-of-bounds in neon_poly1305_blocks.constprop.0+0x1b4/0x250 [poly1305_neon]
Read of size 4 at addr ffff0010e293f010 by task syz-executor.5/1646715
CPU: 4 PID: 1646715 Comm: syz-executor.5 Kdump: loaded Not tainted 5.10.0.aarch64 #1
Hardware name: Huawei TaiShan 2280 /BC11SPCD, BIOS 1.59 01/31/2019
Call trace:
dump_backtrace+0x0/0x394
show_stack+0x34/0x4c arch/arm64/kernel/stacktrace.c:196
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x158/0x1e4 lib/dump_stack.c:118
print_address_description.constprop.0+0x68/0x204 mm/kasan/report.c:387
__kasan_report+0xe0/0x140 mm/kasan/report.c:547
kasan_report+0x44/0xe0 mm/kasan/report.c:564
check_memory_region_inline mm/kasan/generic.c:187 [inline]
__asan_load4+0x94/0xd0 mm/kasan/generic.c:252
neon_poly1305_blocks.constprop.0+0x1b4/0x250 [poly1305_neon]
neon_poly1305_do_update+0x6c/0x15c [poly1305_neon]
neon_poly1305_update+0x9c/0x1c4 [poly1305_neon]
crypto_shash_update crypto/shash.c:131 [inline]
shash_finup_unaligned+0x84/0x15c crypto/shash.c:179
crypto_shash_finup+0x8c/0x140 crypto/shash.c:193
shash_digest_unaligned+0xb8/0xe4 crypto/shash.c:201
crypto_shash_digest+0xa4/0xfc crypto/shash.c:217
crypto_shash_tfm_digest+0xb4/0x150 crypto/shash.c:229
essiv_skcipher_setkey+0x164/0x200 [essiv]
crypto_skcipher_setkey+0xb0/0x160 crypto/skcipher.c:612
skcipher_setkey+0x3c/0x50 crypto/algif_skcipher.c:305
alg_setkey+0x114/0x2a0 crypto/af_alg.c:220
alg_setsockopt+0x19c/0x210 crypto/af_alg.c:253
__sys_setsockopt+0x190/0x2e0 net/socket.c:2123
__do_sys_setsockopt net/socket.c:2134 [inline]
__se_sys_setsockopt net/socket.c:2131 [inline]
__arm64_sys_setsockopt+0x78/0x94 net/socket.c:2131
__invoke_syscall arch/arm64/kernel/syscall.c:36 [inline]
invoke_syscall+0x64/0x100 arch/arm64/kernel/syscall.c:48
el0_svc_common.constprop.0+0x220/0x230 arch/arm64/kernel/syscall.c:155
do_el0_svc+0xb4/0xd4 arch/arm64/kernel/syscall.c:217
el0_svc+0x24/0x3c arch/arm64/kernel/entry-common.c:353
el0_sync_handler+0x160/0x164 arch/arm64/kernel/entry-common.c:369
el0_sync+0x160/0x180 arch/arm64/kernel/entry.S:683
This error can be reproduced by the following code compiled as ko on a
system with kasan enabled:
#include <linux/module.h>
#include <linux/crypto.h>
#include <crypto/hash.h>
#include <crypto/poly1305.h>
char test_data[] = "\x00\x01\x02\x03\x04\x05\x06\x07"
"\x08\x09\x0a\x0b\x0c\x0d\x0e\x0f"
"\x10\x11\x12\x13\x14\x15\x16\x17"
"\x18\x19\x1a\x1b\x1c\x1d\x1e";
int init(void)
{
struct crypto_shash *tfm = NULL;
char *data = NULL, *out = NULL;
tfm = crypto_alloc_shash("poly1305", 0, 0);
data = kmalloc(POLY1305_KEY_SIZE - 1, GFP_KERNEL);
out = kmalloc(POLY1305_DIGEST_SIZE, GFP_KERNEL);
memcpy(data, test_data, POLY1305_KEY_SIZE - 1);
crypto_shash_tfm_digest(tfm, data, POLY1305_KEY_SIZE - 1, out);
kfree(data);
kfree(out);
return 0;
}
void deinit(void)
{
}
module_init(init)
module_exit(deinit)
MODULE_LICENSE("GPL");
The root cause of the bug sits in neon_poly1305_blocks. The logic
neon_poly1305_blocks() performed is that if it was called with both s[]
and r[] uninitialized, it will first try to initialize them with the
data from the first "block" that it believed to be 32 bytes in length.
First 16 bytes are used as the key and the next 16 bytes for s[]. This
would lead to the aforementioned read out-of-bound. However, after
calling poly1305_init_arch(), only 16 bytes were deducted from the input
and s[] is initialized yet again with the following 16 bytes. The second
initialization of s[] is certainly redundent which indicates that the
first initialization should be for r[] only.
This patch fixes the issue by calling poly1305_init_arm64() instead of
poly1305_init_arch(). This is also the implementation for the same
algorithm on arm platform.
Fixes: f569ca1647 ("crypto: arm64/poly1305 - incorporate OpenSSL/CRYPTOGAMS NEON implementation")
Cc: stable@vger.kernel.org
Signed-off-by: GUO Zihua <guozihua@huawei.com>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 8bd582ae9a ]
Add spin-table enable-method and cpu-release-addr properties for
cpu0 node. This is required by all ARMv8 SoC. Otherwise some
bootloader like u-boot can not update cpu-release-addr and linux
fails to start up secondary cpus.
Fixes: 2961f69f15 ("arm64: dts: broadcom: add BCM4908 and Asus GT-AC5300 early DTS files")
Signed-off-by: William Zhang <william.zhang@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b4a544e415 ]
The cpu mask value in interrupt property inherits from bcm4908.dtsi
which sets to four cpus. Correct the value to two cpus for dual core
BCM4906 SoC.
Fixes: c8b404fb05 ("arm64: dts: broadcom: bcm4908: add BCM4906 Netgear R8000P DTS files")
Signed-off-by: William Zhang <william.zhang@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5fb779558f ]
"make dtbs_check" complains about the missing "-supply" suffix for
vdd_lvs1_2 which is clearly a typo, originally introduced in the
msm8994-smd-rpm.dtsi file and apparently later copied to
msm8992-xiaomi-libra.dts:
msm8992-lg-bullhead-rev-10/101.dtb: pm8994-regulators: 'vdd_lvs1_2'
does not match any of the regexes:
'.*-supply$', '^((s|l|lvs|5vs)[0-9]*)|(boost-bypass)|(bob)$', 'pinctrl-[0-9]+'
From schema: regulator/qcom,smd-rpm-regulator.yaml
msm8992-xiaomi-libra.dtb: pm8994-regulators: 'vdd_lvs1_2'
does not match any of the regexes:
'.*-supply$', '^((s|l|lvs|5vs)[0-9]*)|(boost-bypass)|(bob)$', 'pinctrl-[0-9]+'
From schema: regulator/qcom,smd-rpm-regulator.yaml
Reported-by: Rob Herring <robh@kernel.org>
Cc: Konrad Dybcio <konrad.dybcio@somainline.org>
Fixes: f3b2c99e73 ("arm64: dts: Enable onboard SDHCI on msm8992")
Fixes: 0f5cdb31e8 ("arm64: dts: qcom: Add Xiaomi Libra (Mi 4C) device tree")
Signed-off-by: Stephan Gerhold <stephan.gerhold@kernkonzept.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220627135938.2901871-1-stephan.gerhold@kernkonzept.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
