drm_calc_timestamping_constants() computes the pixel/line/frame
durations based on the crtc_ timing values. The corresponding pixel
clock is in mode->crtc_clock, so we need to use that instead of
mode->clock.
This should fix drm_calc_timestamping_constants() for frame packing
stereo modes.
Reviewed-by: mario.kleiner.de@gmail.com
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
crtc_clock is now supposed to be the actual pixel clock corresponding to
the other crtc_ timing values. Populate crtc_clock appropriately in
radeon_atom_get_tv_timings().
This was the only obvious place where we frob with the crtc_ timigns
directly instead of calling drm_mode_set_crtcinfo() which would also
update crtc_clock.
Reviewed-by: mario.kleiner.de@gmail.com
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
drm_calc_timestamping_constants() makes the math more complex
than necessary.
- multipying the dotclock by 1000 is pointless, just makes all the
numbers bigger
- div64_u64() is also pointless, div_u64 is enough
- pixeldur_ns doesn't need any 64bit math
Reviewed-by: mario.kleiner.de@gmail.com
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Move the long blurp to into the body of the comment, leaving only
a short summary line at the top.
Reviewed-by: mario.kleiner.de@gmail.com
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Update the pixel/line/frame duration information when we switch to the
new pipe config. This will keep the timestamping constants in better
sync with the real hardware state.
Reviewed-by: mario.kleiner.de@gmail.com
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
drm core no longer uses crtc->hwmode, and neither does i915, so we can totally ignore it
in i915.
Reviewed-by: mario.kleiner.de@gmail.com
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Rather than using crtc->hwmode, just pass the relevant mode to
drm_calc_vbltimestamp_from_scanoutpos(). This removes the last hwmode
usage from core drm.
Reviewed-by: mario.kleiner.de@gmail.com
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
We don't really use hwmode anymore in i915, so eliminating its use
from the core code seems prudent. Just pass the appropriate mode
to drm_calc_timestamping_constants().
Reviewed-by: mario.kleiner.de@gmail.com
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
drm-intel-next-2014-01-10:
- final bits for runtime D3 on Haswell from Paul (now enabled fully)
- parse the backlight modulation freq information in the VBT from Jani
(but not yet used)
- more watermark improvements from Ville for ilk-ivb and bdw
- bugfixes for fastboot from Jesse
- watermark fix for i830M (but not yet everything)
- vlv vga hotplug w/a (Imre)
- piles of other small improvements, cleanups and fixes all over
Note that the pull request includes a backmerge of the last drm-fixes
pulled into Linus' tree - things where getting a bit too messy. So the
shortlog also contains a bunch of patches from Linus tree. Please yell if
you want me to frob it for you a bit.
* 'drm-intel-next' of git://people.freedesktop.org/~danvet/drm-intel: (609 commits)
drm/i915/bdw: make sure south port interrupts are enabled properly v2
drm/i915: Include more information in disabled hotplug interrupt warning
drm/i915: Only complain about a rogue hotplug IRQ after disabling
drm/i915: Only WARN about a stuck hotplug irq ONCE
drm/i915: s/hotplugt_status_gen4/hotplug_status_g4x/
Pull request of 2014-01-17
Pull request for 3.14. One not so urgent fix, One huge device update.
The pull request corresponds to the patches sent out on dri-devel, except:
[PATCH 02/33], review tag typo pointed out by Matt Turner.
[PATCH 04/33], dropped. The new surface formats are never used.
The upcoming vmware svga2 hardware version 11 will introduce the concept
of "guest backed objects" or -resources. The device will in principle
get all
of its memory from the guest, which has big advantages from the device
point of view.
This means that vmwgfx contexts, shaders and surfaces need to be backed
by guest memory in the form of buffer objects called MOBs, presumably
short for MemoryOBjects, which are bound to the device in a special way.
This patch series introduces guest backed object support. Some new IOCTLs
are added to allocate these new guest backed object, and to optionally
provide
them with a backing MOB.
There is an update to the gallium driver that comes with this update, and
it will be pushed in the near timeframe presumably to a separate mesa branch
before merged to master.
* tag 'vmwgfx-next-2014-01-17' of git://people.freedesktop.org/~thomash/linux: (33 commits)
drm/vmwgfx: Invalidate surface on non-readback unbind
drm/vmwgfx: Silence the device command verifier
drm/vmwgfx: Implement 64-bit Otable- and MOB binding v2
drm/vmwgfx: Fix surface framebuffer check for guest-backed surfaces
drm/vmwgfx: Update otable definitions
drm/vmwgfx: Use the linux DMA api also for MOBs
drm/vmwgfx: Ditch the vmw_dummy_query_bo_prepare function
drm/vmwgfx: Persistent tracking of context bindings
drm/vmwgfx: Track context bindings and scrub them upon exiting execbuf
drm/vmwgfx: Block the BIND_SHADERCONSTS command
drm/vmwgfx: Add a parameter to get max MOB memory size
drm/vmwgfx: Implement a buffer object synccpu ioctl.
drm/vmwgfx: Make sure that the multisampling is off
drm/vmwgfx: Extend the command verifier to handle guest-backed on / off
drm/vmwgfx: Fix up the vmwgfx_drv.h header for new files
drm/vmwgfx: Enable 3D for new hardware version
drm/vmwgfx: Add new unused (by user-space) commands to the verifier
drm/vmwgfx: Validate guest-backed shader const commands
drm/vmwgfx: Add guest-backed shaders
drm/vmwgfx: Hook up guest-backed surfaces
...
Fixes error messages in vmware.log
Signed-off-by: Jakob Bornecrantz <jakob@vmware.com>
Reviewed-by: Michael Banack <banackm@vmware.com>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
The device and kernel module disagrees about the command length of
some commands. More pack attributes might be needed.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Adds the relevant commands to the device interface header and
implements 64-bit binding for 64 bit VMs.
v2: Uppercase command IDs, Correctly use also 64 bit page tables.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Jakob Bornecrantz <jakob@vmware.com>
With guest-backed surfaces, surface->sizes == NULL, causing a kernel oops.
Use the base_size member instead.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Jakob Bornecrantz <jakob@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Combine it with vmw_dummy_query_bo_create, and also make sure
we use tryreserve when reserving the bo to avoid any lockdep warnings
We are sure the tryreserve will always succeed since we are
the only users at that point.
In addition, allow the vmw_bo_pin function to pin/unpin system memory.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Jakob Bornecrantz <jakob@vmware.com>
Only scrub context bindings when a bound resource is destroyed, or when
the MOB backing the context is unbound.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Zack Rusin <zackr@vmware.com>
The device is no longer capable of scrubbing context bindings of resources
that are bound when destroyed.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Jakob Bornecrantz <jakob@vmware.com>
This ioctl enables inter-process synchronization of buffer objects,
which is needed for mesa Guest-Backed objects.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
By default SVGA device creates nonmaskable multisampling surfaces, in
which case multisampleCount of 1 means: the first quality setting
of nonmaskable multisampling surface. Lets change it to make sure
that the backends know that multisampling is really off.
Signed-off-by: Zack Rusin <zackr@vmware.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Make sure we disallow commands if the device doesn't support them.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Zack Rusin <zackr@vmware.com>
Contexts are managed by the kernel only, so disable access to GB
context commands from user-space
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Zack Ruzin <zackr@vmware.com>
When the backing store buffer is evicted, Issue a readback from the
resources and notify the resources that they are no longer bound to
a valid backing store.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Zack Rusin <zackr@vmware.com>
Perform a translation of legacy query commands should they occur
in the command stream.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Zack Rusin <zackr@vmware.com>
Also do basic consistency checking.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Zack Rusin <zackr@vmware.com>
To bind a buffer object as a MOB, just validate it as a MOB
memory type. We are reusing the GMRID manager, although we create a new
instance of it to manage MOB ids and tomake sure we don't exceed
the maximum amount of MOB pages.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Implement MOB setup, binding and unbinding, but don't hook up to
TTM yet.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Zack Rusin <zackr@vmware.com>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Zack Rusin <zackr@vmware.com>
Conflicts:
drivers/gpu/drm/vmwgfx/vmwgfx_ioctl.c
In the future, Scanout buffers need not be backed by VRAM and
the two definitions will differ.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Zack Rusin <zackr@vmware.com>
With dma compliance / IOMMU support added to the driver in kernel 3.13,
the dma addresses can exceed 44 bits, which is what we support in
32-bit mode and with GMR1.
So in 32-bit mode and optionally in 64-bit mode, restrict the dma
addresses to 44 bits, and strip the old GMR1 code.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Jakob Bornecrantz <jakob@vmware.com>
Cc: stable@vger.kernel.org
Conflicts are getting out of hand, and now we have to shuffle even
more in -next which was also shuffled in -fixes (the call for
drm_mode_config_reset needs to move yet again).
So do a proper backmerge. I wanted to wait with this for the 3.13
relaese, but alas let's just do this now.
Conflicts:
drivers/gpu/drm/i915/i915_reg.h
drivers/gpu/drm/i915/intel_ddi.c
drivers/gpu/drm/i915/intel_display.c
drivers/gpu/drm/i915/intel_pm.c
Besides the conflict around the forcewake get/put (where we chaged the
called function in -fixes and added a new parameter in -next) code all
the current conflicts are of the adjacent lines changed type.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
In some cases we enter the cursor code with file_priv = NULL causing an oops,
we also can try to unpin something that isn't pinned, and this is a good fix for it.
Cc: stable@vger.kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
Single regression fix for nouveau
* 'drm-nouveau-next' of git://git.freedesktop.org/git/nouveau/linux-2.6:
drm/nouveau: fix null ptr dereferences on some boards
Regression from "device: populate master subdev pointer only when fully
constructed"
Reported-by: Bob Gleitsmann <rjgleits@bellsouth.net>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Fix build error: qxl uses crc32 functions so it needs to select
CRC32.
Also use angle quotes around a kernel header file name.
drivers/built-in.o: In function `qxl_display_read_client_monitors_config':
(.text+0x19d754): undefined reference to `crc32_le'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Include appropriate header file drm/r128/r128_drv.h in
drm/r128/r128_ioc32.c because function r128_compat_ioctl() has its
prototype declaration in the header file.
This eliminates the following warning in drm/r128/r128_ioc32.c:
drivers/gpu/drm/r128/r128_ioc32.c:196:6: warning: no previous prototype for ‘r128_compat_ioctl’ [-Wmissing-prototypes]
Signed-off-by: Rashika Kheria <rashika.kheria@gmail.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Mark function as static because it is not used outside the file
drm/via/via_drv.c.
This eliminates the following warning in drm/via/via_drv.c:
drivers/gpu/drm/via/via_drv.c:49:6: warning: no previous prototype for ‘via_driver_postclose’ [-Wmissing-prototypes]
Signed-off-by: Rashika Kheria <rashika.kheria@gmail.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Mark function as static because it is not used outside the file
drm/sis/sis_drv.c.
This eliminates the following warning in drm/sis/sis_drv.c:
drivers/gpu/drm/sis/sis_drv.c:97:6: warning: no previous prototype for ‘sis_driver_postclose’ [-Wmissing-prototypes]
Signed-off-by: Rashika Kheria <rashika.kheria@gmail.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Mark function qxl_device_init() as static in drm/qxl/qxl_kms.c because
it is not used outside this file.
This eliminates the following warning in drm/qxl/qxl_kms.c:
drivers/gpu/drm/qxl/qxl_kms.c:118:5: warning: no previous prototype for ‘qxl_device_init’ [-Wmissing-prototypes]
Signed-off-by: Rashika Kheria <rashika.kheria@gmail.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Include appropriate header file drivers/gpu/drm/mga/mga_drv.h in
drm/mga/mga_ioc32.c because function mga_compat_ioctl() has its
prototype declaration in the header file.
This eliminates the following warning in drm/mga/mga_ioc32.c:
drivers/gpu/drm/mga/mga_ioc32.c:207:6: warning: no previous prototype for ‘mga_compat_ioctl’ [-Wmissing-prototypes]
Signed-off-by: Rashika Kheria <rashika.kheria@gmail.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Mark functions mgag200_ttm_global_release(),
mgag200_ttm_bo_is_mgag200_bo() and mgag200_ttm_tt_create() as static in
drm/mgag200/mgag200_ttm.c because they are not used outside this file.
This eliminates the following warning in drm/mgag200/mgag200_ttm.c:
drivers/gpu/drm/mgag200/mgag200_ttm.c:84:1: warning: no previous prototype for ‘mgag200_ttm_global_release’ [-Wmissing-prototypes]
drivers/gpu/drm/mgag200/mgag200_ttm.c:105:6: warning: no previous prototype for ‘mgag200_ttm_bo_is_mgag200_bo’ [-Wmissing-prototypes]
drivers/gpu/drm/mgag200/mgag200_ttm.c:211:16: warning: no previous prototype for ‘mgag200_ttm_tt_create’ [-Wmissing-prototypes]
Signed-off-by: Rashika Kheria <rashika.kheria@gmail.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Mark functions mga_set_start_address(), mga_encoder_destroy() and
mga_connector_best_encoder() as static in drm/mgag200/mgag200_mode.c
because they are not used outside this file.
This eliminates the following warnings in drm/mgag200/mgag200_mode.c:
drivers/gpu/drm/mgag200/mgag200_mode.c:694:6: warning: no previous
prototype for ‘mga_set_start_address’ [-Wmissing-prototypes]
drivers/gpu/drm/mgag200/mgag200_mode.c:1401:6: warning: no previous
prototype for ‘mga_encoder_destroy’ [-Wmissing-prototypes]
drivers/gpu/drm/mgag200/mgag200_mode.c:1561:21: warning: no previous
prototype for ‘mga_connector_best_encoder’ [-Wmissing-prototypes]
Signed-off-by: Rashika Kheria <rashika.kheria@gmail.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Mark function mgag200_bo_unref() as static in drm/mgag200/mgag200_main.c
because it is not used outside this file.
This eliminates the following warning in drm/mgag200/mgag200_main.c:
drivers/gpu/drm/mgag200/mgag200_main.c:313:6: warning: no previous prototype for ‘mgag200_bo_unref’ [-Wmissing-prototypes]
Signed-off-by: Rashika Kheria <rashika.kheria@gmail.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Mark functions cirrus_ttm_global_release(), cirrus_ttm_bo_is_cirrus_bo()
and cirrus_ttm_tt_create() as static in drm/cirrus/cirrus_ttm.c because
they are not used outside this file. Remove unused function
cirrus_bo_unpin() from drm/cirrus/cirrus_ttm.c.
This eliminates the following warnings in drm/cirrus/cirrus_ttm.c:
drivers/gpu/drm/cirrus/cirrus_ttm.c:84:1: warning: no previous prototype for ‘cirrus_ttm_global_release’ [-Wmissing-prototypes]
drivers/gpu/drm/cirrus/cirrus_ttm.c:105:6: warning: no previous prototype for ‘cirrus_ttm_bo_is_cirrus_bo’ [-Wmissing-prototypes]
drivers/gpu/drm/cirrus/cirrus_ttm.c:211:16: warning: no previous prototype for ‘cirrus_ttm_tt_create’ [-Wmissing-prototypes]
drivers/gpu/drm/cirrus/cirrus_ttm.c:378:5: warning: no previous prototype for ‘cirrus_bo_unpin’ [-Wmissing-prototypes]
Signed-off-by: Rashika Kheria <rashika.kheria@gmail.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Mark functions cirrus_set_start_address(), cirrus_encoder_destroy(),
cirrus_vga_get_modes() and cirrus_connector_best_encoder() as static in
drm/cirrus/cirrus_mode.c because they are not used outside this file.
This eliminates the following warnings in drm/cirrus/cirrus_mode.c:
drivers/gpu/drm/cirrus/cirrus_mode.c:105:6: warning: no previous
prototype for ‘cirrus_set_start_address’ [-Wmissing-prototypes]
drivers/gpu/drm/cirrus/cirrus_mode.c:456:6: warning: no previous
prototype for ‘cirrus_encoder_destroy’ [-Wmissing-prototypes]
drivers/gpu/drm/cirrus/cirrus_mode.c:495:5: warning: no previous
prototype for ‘cirrus_vga_get_modes’ [-Wmissing-prototypes]
drivers/gpu/drm/cirrus/cirrus_mode.c:512:21: warning: no previous
prototype for ‘cirrus_connector_best_encoder’ [-Wmissing-prototypes]
Signed-off-by: Rashika Kheria <rashika.kheria@gmail.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Mark function cirrus_bo_unref() as static in drm/cirrus/cirrus_main.c
because it is not used outside this file.
This eliminates the following warning in drm/cirrus/cirrus_main.c:
drivers/gpu/drm/cirrus/cirrus_main.c:258:6: warning: no previous
prototype for ‘cirrus_bo_unref’ [-Wmissing-prototypes]
Signed-off-by: Rashika Kheria <rashika.kheria@gmail.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Mark functions ast_ttm_global_release(), ast_ttm_bo_is_ast_bo() and
ast_ttm_tt_create() as static in drm/ast/ast_ttm.c because they are not
used outside this file.
This eliminates the following warnings in drm/ast/ast_ttm.c:
drivers/gpu/drm/ast/ast_ttm.c:84:1: warning: no previous prototype for
‘ast_ttm_global_release’ [-Wmissing-prototypes]
drivers/gpu/drm/ast/ast_ttm.c:105:6: warning: no previous prototype for
‘ast_ttm_bo_is_ast_bo’ [-Wmissing-prototypes]
drivers/gpu/drm/ast/ast_ttm.c:211:16: warning: no previous prototype for
‘ast_ttm_tt_create’ [-Wmissing-prototypes]
Signed-off-by: Rashika Kheria <rashika.kheria@gmail.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Mark functions ast_set_sync_reg(), ast_set_dac_reg(),
ast_set_start_address_crt1(), ast_crtc_init(), ast_encoder_init(),
ast_connector_init(), ast_cursor_init(), ast_cursor_fini(),
ast_show_cursor() and ast_hide_cursor() as static in drm/ast/ast_mode.c
because they are not used outside this file.
This eliminates the following warning in drm/ast/ast_mode.c:
drivers/gpu/drm/ast/ast_mode.c:407:6: warning: no previous prototype for
‘ast_set_sync_reg’ [-Wmissing-prototypes]
drivers/gpu/drm/ast/ast_mode.c:418:6: warning: no previous prototype for
‘ast_set_dac_reg’ [-Wmissing-prototypes]
drivers/gpu/drm/ast/ast_mode.c:430:6: warning: no previous prototype for
‘ast_set_start_address_crt1’ [-Wmissing-prototypes]
drivers/gpu/drm/ast/ast_mode.c:626:5: warning: no previous prototype for
‘ast_crtc_init’ [-Wmissing-prototypes]
drivers/gpu/drm/ast/ast_mode.c:713:5: warning: no previous prototype for
‘ast_encoder_init’ [-Wmissing-prototypes]
drivers/gpu/drm/ast/ast_mode.c:780:5: warning: no previous prototype for
‘ast_connector_init’ [-Wmissing-prototypes]
drivers/gpu/drm/ast/ast_mode.c:813:5: warning: no previous prototype for
‘ast_cursor_init’ [-Wmissing-prototypes]
drivers/gpu/drm/ast/ast_mode.c:850:6: warning: no previous prototype for
‘ast_cursor_fini’ [-Wmissing-prototypes]
drivers/gpu/drm/ast/ast_mode.c:968:6: warning: no previous prototype for
‘ast_show_cursor’ [-Wmissing-prototypes]
drivers/gpu/drm/ast/ast_mode.c:979:6: warning: no previous prototype for
‘ast_hide_cursor’ [-Wmissing-prototypes]
Signed-off-by: Rashika Kheria <rashika.kheria@gmail.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Mark function ast_bo_unref() as static because it is not used outside
file ast_main.c and remove unused function ast_get_max_dclk() in
ast_main.c.
This eliminates the following warning in drm/ast/ast_main.c:
drivers/gpu/drm/ast/ast_main.c:192:10: warning: no previous prototype
for ‘ast_get_max_dclk’ [-Wmissing-prototypes]
drivers/gpu/drm/ast/ast_main.c:452:6: warning: no previous prototype for
‘ast_bo_unref’ [-Wmissing-prototypes]
Signed-off-by: Rashika Kheria <rashika.kheria@gmail.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Include appropriate header file include/drm/drm_usb.h in drm/drm_usb.c
because functions drm_get_usb_dev(), drm_usb_init() and drm_usb_exit()
have their prototype declarations in the header file.
This eliminates the following warning in drm/drm_usb.c:
drivers/gpu/drm/drm_usb.c:5:5: warning: no previous prototype for
‘drm_get_usb_dev’ [-Wmissing-prototypes]
drivers/gpu/drm/drm_usb.c:61:5: warning: no previous prototype for
‘drm_usb_init’ [-Wmissing-prototypes]
drivers/gpu/drm/drm_usb.c:75:6: warning: no previous prototype for
‘drm_usb_exit’ [-Wmissing-prototypes]
Signed-off-by: Rashika Kheria <rashika.kheria@gmail.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Acked-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This reverts commit 3fbd6439e4.
This caused some strange booting lockup issues on an Intel G33
belonging to Daniel Vetter, very unusual, I was hoping Daniel
would track this down, but it looks like instead I'll have to hack
a different fix for -next.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Black screen fixes, one for hsw+bdw each and a regression fix for
locking+load detection.
* tag 'drm-intel-fixes-2014-01-13' of git://people.freedesktop.org/~danvet/drm-intel:
drm/i915/bdw: make sure south port interrupts are enabled properly v2
drm/i915: Don't grab crtc mutexes in intel_modeset_gem_init()
drm/i915: fix DDI PLLs HW state readout code
This was hidden in a generic void * dev->mm_private. But only ever
used for gem. But thanks to this fake generic pretension no one
noticed that Rob's drm drivers are now all broken.
So just give the offset manager a type pointer and fix up msm, omapdrm
and tilcdc.
v2: Fixup compile fail.
v3: Fixup rebase fail that David spotted.
Cc: David Herrmann <dh.herrmann@gmail.com>
Cc: Rob Clark <robdclark@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Anyway, nothing big here, Three more code cleanup patches from Rashika
Kheria, and one TTM/vmwgfx patch from me that tightens security around TTM
objects enough for them to opened using prime objects from render nodes:
Previously any client could access a shared buffer using the "name", also
without actually opening it. Now a reference is required, and for render nodes
such a reference is intended to only be obtainable using a prime fd.
vmwgfx-next 2014-01-13 pull request
* tag 'vmwgfx-next-2014-01-13' of git://people.freedesktop.org/~thomash/linux:
drivers: gpu: Mark functions as static in vmwgfx_fence.c
drivers: gpu: Mark functions as static in vmwgfx_buffer.c
drivers: gpu: Mark functions as static in vmwgfx_kms.c
drm/ttm: ttm object security fixes for render nodes
Some code cleanup by Rashika Keria,
VM stuff for ttm:
-Use PFNMAP instead of MIXEDMAP where possible for performance
-Refuse to fault imported pages, an initial step to support dma-bufs
better from within TTM.
-Correctly set page mapping and -index members. These are needed in various
places in the vm subsystem that we are not using yet, but plan to use soonish:
For example unmap-mapping-range keeping COW pages, and dirty tracking
fbdefio style, but also for PCI memory.
ttm-next 2013-01-14 pull request
* tag 'ttm-next-2014-01-13' of git://people.freedesktop.org/~thomash/linux:
drivers: gpu: Remove unused function in ttm_lock.c
drivers: gpu: Mark function as static in ttm_bo_util.c
drivers: gpu: Mark function as static in ttm_bo.c
drm/ttm: Correctly set page mapping and -index members
drm/ttm: Refuse to fault (prime-) imported pages
drm/ttm: Use VM_PFNMAP for shared bo maps
Xorg fbdev driver requires smem_start/smem_len, otherwise
it tries to map 0 bytes as video memory.
Bugzilla: https://bugzilla.novell.com/show_bug.cgi?id=856760
Signed-off-by: Martin Koegler <martin.koegler@chello.at>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This pull request adds an anon file for exynos specific mmaper
to resolve potential a dead lock issue pointed out by Al Viro,
and fixes build break of drm-next.
* 'exynos-drm-next' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos:
drm/exynos: fix build error caused by removed drm core macros
drm/exynos: use a new anon file for exynos gem mmaper
This is the drm-next pull for radeon for 3.14. Highlights include:
- dpm rework which fixes some issues and allows us to enable dpm by
default on CIK parts
- enable clockgating on CIK parts
- pci config reset. This is a bus-level chip reset that can be more
reliable than soft reset in certain cases. Disabled by default. Enable
with the hard_reset module option.
- big endian rptr/wrptr update fixes
- lots of debugfs improvements
- some driver cleanup patches from Rashika Kheria
- bug fixes
* 'drm-next-3.14-wip' of git://people.freedesktop.org/~agd5f/linux: (50 commits)
drm/radeon: implement pci config reset for CIK (v3)
drm/radeon: implement pci config reset for SI (v2)
drm/radeon: implement pci config reset for evergreen/cayman (v2)
drm/radeon: implement pci config reset for r6xx/7xx (v3)
drm/radeon: add pci config hard reset
drm/radeon: add hard_reset module parameter
drm/radeon: skip colorbuffer checking if COLOR_INFO.FORMAT is set to INVALID
radeon/pm: Guard access to rdev->pm.power_state array
drivers: gpu: Move prototype declarations to header file radeon_mode.h from radeon_atombios.c and radeon_combios.c
drivers: gpu: Move prototype declaration to header file radeon_mode.h
drm/radeon: move com/atombios scratch reg functions to radeon_mode.h
drm/radeon/dpm: make some functions static for TN
drm/radeon/dpm: make some functions static for sumo
drm/radeon/dpm: make some functions static for CI
drivers: gpu: Include appropriate header file in ci_smc.c
drivers: gpu: Move prototype declaration to header file radeon_mode.h from atombios_i2c.c
drivers: gpu: Include appropriate header file in si_smc.c and remove prototype declaration from header file sislands_smc.h
drivers: gpu: Add static keyword to the definition of KMS_INVALID_IOCTL in radeon_kms.c
drivers: gpu: Mark function as static in r600_hdmi.c
drivers: gpu: Mark function as static in radeon_gem.c
...
MSM tree from Rob.
* 'msm-next' of git://people.freedesktop.org/~robclark/linux:
drm/msm: add a330/apq8x74
drm/msm: add mdp5/apq8x74
drm/msm: add hdmi support for apq8x74/mdp5
drm/msm: move irq utils to mdp_kms
drm/msm: split out msm_kms.h
drm/msm: mdp4_format -> mdp_format
drm/msm: resync generated headers
drm/msm: move mdp4 -> mdp/mdp4
drm/msm: add support for msm8060ab/bstem
drm/msm: add support for non-IOMMU systems
drm/msm: fix bus scaling
drm/msm: add missing MODULE_FIRMWARE()s
drm/msm: COMPILE_TEST support
We were apparently relying on the defaults on BDW, which resulted in no
hotplug or AUX interrupts. So be sure to call the ibx_irq_preinstall to
enable all interrupts.
v2: use preinstall instead of redundant SDIER write
References: https://bugs.freedesktop.org/show_bug.cgi?id=72834
References: https://bugs.freedesktop.org/show_bug.cgi?id=72833
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Daniel thought that this was an opportune moment to include which pins
and bits ended up being stuck in the WARN.
Suggested-by: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Disabling the hotplug IRQ is a two-step process. First, inside the IRQ
handler we mark the rogue hotplug pin for disabling. Then later in the
hotplug worker, we actually disable the hotplug pin. So we should not
WARN about the rogue hotplug IRQ being sent until after we have
completed disabling the pin.
References: https://bugzilla.redhat.com/show_bug.cgi?id=1051170
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
It seems that hardware that is broken enough to emit a hotplug IRQ even
though the pin is surposedly disable, will do so indefinitely.
Note: There's a good chance the underlying issue has been fixed with
commit 0ce99f749b
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date: Fri Jul 26 11:27:49 2013 +0200
drm/i915: fix gen4 digital port hotplug definitions
References: https://bugzilla.redhat.com/show_bug.cgi?id=1051170
Link: https://bugzilla.redhat.com/attachment.cgi?id=847786
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
[danvet: Add note about the potential fix.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
We specifically exclude original gen4 (i.e. i965g/gm), so update the
naming for consistency. Spotted while reviewing related code due to a
report from Jesse about byt needing again different values.
v2: g4x, not gm45 since this also applies to the desktop version.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
It's an accident waiting to happen.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
INSTPM is a masked register so use the _MASKED_BIT_{ENABLE,DISABLE}
macros when enabling/disabling self-refresh on 915GM.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
There's no LVDS port on 830M so don't go reading the LVDS control
register.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
PFIT_CONTROL doesn't exist on 830M, so avoid reading it in
i9xx_get_pfit_config().
Also assume that only mobile gen2/3 chipsets have a panel fitter. This
matches the documentation, but I didn't have real hardware to verify.
Gen4 docmentation is a bit inconsistent, but experimenetation on my
LPT machine suggests that the panel fitter is available on non-mobile
gen4 platforms. At least on this machine panel fitter appears works
just fine even on VGA output.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Many of the fields from Gen6 have gone away for vlv. Strip all those
fields that are not relevent and try to update fields that we care
about. This patch give information about current RP & RC status and
individual Wells.
v2: Move Render & Media Well status to separate lines (Ville)
Signed-off-by: Deepak S <deepak.s@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
VGA detection requires the reference clock to be on, so make sure this
is the case.
This fixes VGA hotplug/manual detection where all pipes are off and so
we would normally disable all clocks.
v2:
- Instead of disabling PSR clock gating, force the reference clock on
through the DPLL_A register. (Kin Chan S <kin.s.chan@intel.com>)
v3:
- Move enabling of the clock to intel_reset_dpio() and use the DPLL_B
register instead, where we already have a similar tweak for the CRI
clock. (Ville)
Reported-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
intel_init_dpio() isn't called during resume, so we won't set the CRI
clock enable bit during that time. Move the enabling to
intel_reset_dpio() instead.
Note that the HW reset value for this bit is 1, so probably this patch
won't make any difference. We should still make the setting explicit,
since BIOS could change things under us.
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
The WA is mentioned in HSW's GAMMA_MODE register documentation, but
not on on BDW's documentation, so let's assume it is not needed there.
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
That we can use for debugging purposes.
v2: Use designated initializers for the 'names' array (Paulo Zanoni,
Jani Nikula).
Add a check in case the array has a hole (which can now remain
unnoticed with designated initializers) (Jani Nikula)
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com> (for v1)
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
In some cases we have more than 1 connector associated to an encoder
(e.g., SDVO, Haswell DP/HDMI) and we can only set a mode for one of
these connectors. If we only allowed modesets for connected connectors
we would never need this patch, but since we do allow modeset for
disconnected connectors we may see user space trying to set modes on
the two connectors attached to the same encoder, so we need to forbid
that.
This problem can be reproduced by running the following
intel-gpu-tools test case:
./kms_setmode --run-subtest clone-exclusive-crtc
Thanks to Daniel Vetter for providing a version of this patch on
pastebin.
Credits-to: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
So shuffle the checks around a bit. Also give all the structs and
functions proper prefixes: i830_ for the dual-pipe mobile platforms
and i845_ for the two single-pipe desktop platforms.
Note that the max fifo value isn't actually correct for the i830M, but
since we don't frob the fifo split we don't actually need it. This is
different for some gen3 devices where we need the full fifo for self
refresh mode.
Cc: Thomas Richter <richter@rus.uni-stuttgart.de>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
My OCD just couldn't let this slide. Spotted while reviewing Ville's
patch to only flip planes when we have FBC.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Looks like 830M doesn't quite like it when you try to move a plane from
one pipe to another. It seems that the plane's old pipe has to be active
even if the plane is already disabled, otherwise the relevant register
just won't accept new values.
The following commit:
commit 1f1c2e2468
Author: Ville Syrjälä <ville.syrjala@linux.intel.com>
Date: Thu Nov 28 17:30:01 2013 +0200
drm/i915: Swap primary planes on gen2 for FBC
caused a regression on 830M. It will attempt to swap the planes when the
driver is loaded, but at that time only pipe A might be active, so plane
A gets disabled, but plane B won't get enabled since pipe B is not
active when we try to move the plane over to pipe A.
There's no reason to swap planes on 830M since it doesn't support
FBC. Change the logic a bit to limit the plane swapping to platforms
which actually support FBC. This should avoid getting a black screen on
830M.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
When the pipe A force quirk is applied the code will attempt to grab
a crtc mutex during intel_modeset_setup_hw_state(). If we're already
holding all crtc mutexes this will obviously deadlock every time.
So instead of using drm_modeset_lock_all() just grab the
mode_config.mutex. This is enough to avoid the unlocked mutex warnings
from certain lower level functions.
The regression was introduced in:
commit 0274766428
Author: Ville Syrjälä <ville.syrjala@linux.intel.com>
Date: Mon Dec 2 11:08:06 2013 +0200
drm/i915: Take modeset locks around intel_modeset_setup_hw_state()
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: stable@vger.kernel.org
[danvet: Add cc: stable since the offending commit has that, too.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Add support for adreno 330. Not too much different, just a few
differences in initial configuration plus setting OCMEM base.
Userspace support is already in upstream mesa.
Note that the existing DT code is simply using the bindings from
downstream android kernel, to simplify porting of this driver to
existing devices. These do not constitute any committed/stable
DT ABI. The addition of proper DT bindings will be a subsequent
patch, at which point (as best as possible) I will try to support
either upstream bindings or what is found in downstream android
kernel, so that existing device DT files can be used.
Signed-off-by: Rob Clark <robdclark@gmail.com>
Add support for the new MDP5 display controller block. The mapping
between parts of the display controller and KMS is:
plane -> PIPE{RGBn,VIGn} \
crtc -> LM (layer mixer) |-> MDP "device"
encoder -> INTF /
connector -> HDMI/DSI/eDP/etc --> other device(s)
Unlike MDP4, it appears we can get by with a single encoder, rather
than needing a different implementation for DTV, DSI, etc. (Ie. the
register interface is same, just different bases.)
Also unlike MDP4, all the IRQs for other blocks (HDMI, DSI, etc) are
routed through MDP.
And finally, MDP5 has this "Shared Memory Pool" (called "SMP"), from
which blocks need to be allocated to the active pipes based on fetch
stride.
Signed-off-by: Rob Clark <robdclark@gmail.com>
The HDMI block is basically the same between older SoC's with mdp4
display controller, and newer ones with mdp5.
So mostly this consists of better abstracting out the different sets of
regulators, clks, etc. In particular, for regulators and clks we can
split it up by what is needed for hot plug detect to work, and what is
needed to light up the display.
Also, 8x74 has a new phy.. a very simple one, but split out into a
different mmio space. And with mdp5, the irq is shared with mdp, so we
don't directly register our own irq handler.
Signed-off-by: Rob Clark <robdclark@gmail.com>
This can be shared between mdp4 and mdp5. Both use the same set of
parameters to describe the format to the hw.
Signed-off-by: Rob Clark <robdclark@gmail.com>
There are some little bits and pieces that mdp4 and mdp5 can share, so
move things around so that we can have both in a common parent
directory.
Signed-off-by: Rob Clark <robdclark@gmail.com>
This adds the necessary configuration for the APQ8060A SoC (dual-core
krait + a320 gpu) as found on the bstem board.
Signed-off-by: Rob Clark <robdclark@gmail.com>
