The old_fb field is only used to indicate whether a page flip is
pending. Turn it into a bool named flip_pending. Rename event and
page_flip_work to flip_event and flip_work for consistency.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The operation is called page_flip, rename its implementation
accordingly.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The omapdrm driver implements a mechanism to apply new settings (due to
plane update, plane disable, plane property set, CRTC mode set or CRTC
DPMS) asynchronously. While this improves performance, it adds a level
of complexity that makes transition to the atomic update API close to
impossible. Furthermore the atomic update API requires part of the apply
operations to be synchronous (such as pinning the framebuffers), so the
current implementation needs to be changed.
Simplify the CRTC and plane code by making updates synchronous to
prepare for the switch to the atomic update API. Asynchronous update
will be implemented in a second step.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Rotation is a standard property, store it in
dev->mode_config.rotation_property. While at it, extract the properties
initialization code to a separate function instead of running it for
every plane.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
At present, dma_buf_export() takes a series of parameters, which
makes it difficult to add any new parameters for exporters, if required.
Make it simpler by moving all these parameters into a struct, and pass
the struct * as parameter to dma_buf_export().
While at it, unite dma_buf_export_named() with dma_buf_export(), and
change all callers accordingly.
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Acked-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Acked-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
Setting a dev_pm_ops resume callback but not a set of hibernation
handler means that pm function will not be called upon hibernation.
Fix this by using SIMPLE_DEV_PM_OPS, which appropriately assigns the
suspend and hibernation handlers and move omap_dmm_resume under
CONFIG_PM_SLEEP to avoid build warnings.
Signed-off-by: Grygorii Strashko <grygorii.strashko@linaro.org>
Reviewed-by: Rob Clark <robdclark@gmail.com>
[tomi valkeinen: add missing 'static']
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Setting a dev_pm_ops suspend/resume pair but not a set of hibernation
functions means those pm functions will not be called upon hibernation.
Fix this by using SIMPLE_DEV_PM_OPS, which appropriately assigns the
suspend and hibernation handlers and move
omap_drm_suspend/omap_drm_resume under CONFIG_PM_SLEEP to avoid build
warnings.
Signed-off-by: Grygorii Strashko <Grygorii.Strashko@linaro.org>
[tomi.valkeinen@ti.com: fix conflict, clean up description]
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
We store the fb being page-flipped to 'old_fb' field, but we don't
increase the ref count of the fb when doing that. While I am not
sure if it can cause problem in practice, it's still safer to keep a ref
when storing a pointer to a fb.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The omapdrm DMM code sometimes crashes with:
WARNING: CPU: 0 PID: 1235 at lib/list_debug.c:36 __list_add+0x8c/0xbc()
list_add double add: new=e9265368, prev=e90139c4, next=e9265368.
This is caused by the code calling release_engine() twice for the same
engine.
dmm_txn_commit(wait=true) call is supposed to wait until the DMM
transaction has been finished. And it does that, but it does not wait
for the irq handler to finish.
What happens is that the irq handler is triggered, and it either wakes
up the thread that called dmm_txn_commit(), or that thread never even
slept because the transaction was finished in the HW very quickly. That
thread then continues executing, even if the irq handler is not yet
finished, and a new transaction may be initiated. If that transaction is
async (i.e. wait=false), a 'async' flag is set to true. The original irq
handler, which has yet not finished, then sees the transaction as
'async', even if it was supposed to be 'sync'.
When that happens, the irq handler does an extra release_engine() call
because it thinks it need to release the engine, leading to the crash.
This patch fixes the issue by using completion to ensure that the irq
handler has finished before a dmm_txn_commit(wait=true) may continue.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
omap_gem_objects are added to dev->obj_list in omap_gem_new, and removed
in omap_gem_free_object. Unfortunately there's no locking for
dev->obj_list, which eventually leads to a crash:
WARNING: CPU: 1 PID: 1123 at lib/list_debug.c:59 __list_del_entry+0xa4/0xe0()
list_del corruption. prev->next should be e9281344, but was ea722b84
Add a spinlock to protect dev->obj_list.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
spin_is_locked(x) returns always 0 on uniprocessor, triggering BUG() in
omapdrm.
Change it to use assert_spin_locked() to fix the issue.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
We need to ignore DIGIT SYNC LOST error when enabling/disabling TV
output. The code does that, but it ignores the DIGI SYNC LOST when
enabling any output. Normally this does no harm, but it could make us
miss DIGIT SYNC LOST on some rare occasions.
Fix the code to only ignore DIGIT SYNC LOST when enabling/disabling TV.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
omapdrm tries to avoid error floods by unregistering the error irq when
an error happens, and then registering the error irq again later.
However, the code is racy, as it sometimes tries to unregister the error
irq when it's already unregistered, leading to WARN().
Also, the code only registers the error irq again when something is done
on that particular output, i.e. if only TV is used to flip the buffers,
and LCD is showing a same buffer, an error on LCD will cause the LCD
error irq to be unregistered and never registered again.
To fix this, let's keep the error irqs always enabled and trust the
DRM_ERROR_RATELIMITED to limit the flood.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
omapdrm uses normal DRM_ERROR() print when the HW reports an error. As
we sometimes may get a flood of errors, let's rather use
DRM_ERROR_RATELIMITED().
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
When not using proper hotplug detection, DRM polls periodically the
connectors to find out if a cable is connected. This polling can happen
at any time, even very late in the suspend process.
This causes a problem with omapdrm, when the poll happens during the
suspend process after GPIOs have been disabled, leading to a crash in
gpio_get().
This patch fixes the issue by adding suspend and resume hooks to
omapdrm, in which we disable and enable, respectively, the polling.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
omapdrm has dummy functions for platform_device's
suspend/resume/shutdown. The functions don't do anything, and those
platform device functions are deprecated, so remove them from omapdrm.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The tiler irq handler uses engine->async value, but the code that sets
engine->async and enables the interrupt does not have a barrier. This
may cause the irq handler to see the old value of engine->async, causing
memory corruption.
Reported-by: Harinarayan Bhatta <harinarayan@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
omap_plane_pre_apply() sets the plane's output channel too late, only
after the plane has already been otherwise configured and enabled. This
causes problems, as at the configuration stage we need to make decisions
based on the output channel.
This may lead to bad plane settings or failing to setup the plane.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
On OMAP5 it is not possible to use TILER buffer with CPU when caching or
write-combining is used. Doing so leads to errors from the memory
manager.
However, on OMAP4, write-combining works fine.
This patch adds platform specific data for the TILER, and a function
tiler_get_cpu_cache_flags() which can be used to get the caching mode to
be used.
Note that without write-combining the use of the TILER buffer with CPU
is unusably slow. It's still good to have it operational for testing
purposes.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
omapdrm doesn't check if the pitch of the framebuffer and the color
format's bits-per-pixel are compatible. omapdss requires that the stride
of a buffer is an integer number of pixels
For example, when using modetest with a display that has x resolution of
1280, and using packed 24 RGB mode (3 bytes per pixel), modetest
allocates a buffer with a byte stride of 4 * 1280 = 5120. But 5120 / 3 =
1706.666... pixels, which causes wrong colors and a tilt on the screen.
Add a check into omapdrm to return an error if the user tries to use
such a combination.
Note: this is not a HW requirement at least for non-rotation use cases,
but a SW driver requirement. In the future we should study if also
rotation use cases are fine with any stride size, and if so, change the
driver to allow these strides.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
When an error happens in omap_framebuffer_create(),
omap_framebuffer_create() calls omap_framebuffer_destroy() if the fb
struct has been allocated. However, that crashes, as
omap_framebuffer_destroy(), which calls drm_framebuffer_cleanup(),
should only be called after drm_framebuffer_init()
Fix this by just calling kfree() for the allocated fb when an error
happens.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
omapdrm should work fine even if fbdev is missing. The current driver
crashes in that case, though, as it is missing checks for the fbdev.
Add the checks so that we don't free fbdev or restore fbdev mode when
there's no fbdev.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
unpin_worker() calls omap_framebuffer_unpin() without any locks, which
looks very suspicious. However, both pin and unpin are always called via
the driver's private workqueue, so the access is synchronized that way.
Add a comment to make this clear.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
omap_framebuffer_pin() and omap_framebuffer_unpin() are currently
broken, as they cannot be called multiple times (i.e. pin, pin, unpin,
unpin), which is what happens in certain cases. This issue causes the
driver to possibly use 0 as an address for a displayed buffer, leading
to OCP error from DSS.
This patch fixes the issue by adding a simple pin_count, used to track
the number of pins.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Clear omap_obj's paddr when unmapping the memory, so that it's easier to
catch bad use of the paddr.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The DRM documentation says:
"If a page flip is already pending, the page_flip operation must return
-EBUSY."
Currently omapdrm returns -EINVAL instead. Fix omapdrm by returning
-EBUSY.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
OMAP DSS hardware supports changing the output port to which an overlay
manager's video stream goes. For example, DPI video stream can come from
any of the four overlay managers on OMAP5.
However, as it's difficult to manage the change in the driver, the
omapdss driver does not support that at the moment, and has a hardcoded
overlay manager per output.
omapdrm, on the other hand, uses the hardware features to find out which
overlay manager to use for an output, which causes problems. For
example, on OMAP5, omapdrm tries to use DIGIT overlay manager for DPI
output, instead of the LCD3 required by the omapdss driver.
This patch changes the omapdrm to use the omapdss driver's hardcoded
overlay managers, which fixes the issue.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The next commit will need functions to be reordered. Do it separately to
help review.
This only moves functions without any change to the code.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Planes are destroyed after framebuffers, which has the side effect of
disabling all planes. There is thus no need to disable planes explicitly
when destroying them.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
The function will convert the Q16 source coordinates to integers, avoid
converting integers to Q16 first and perform the opposite conversion.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Move the set_enabled function to avoid the forward declaration. While at
it prefix it with omap_crtc_ like most other functions in the file, and
fix the comment stating in which contexts the function is called.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
The full_update field is always set to true before calling
omap_crtc_appy(), resulting in its value always being true in the single
location where it is tested, in omap_crtc_pre_apply(). Remove it.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
All the manual update display code implements eventually ends up to just
calls to omap_connector_flush(), currently implemented as an empty TODO
stub. Remove it, the code can always be revived and implemented later if
interest in manual update displays becomes a reality.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
The vblank interrupt is used by the driver as a completion signal when
applying new settings.
A race condition exist between enabling the vblank interrupt and
applying new settings to the hardware by setting the GO bit. If a vblank
interrupt occurs in-between, the driver will incorrectly consider the
new settings to be applied. Fix this by enabling the interrupt after
setting the GO bit.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Whether to reset plane properties at disable time isn't well-defined in
DRM, but resetting only part of them is probably as bad as it can get.
Make the behaviour coherent by resetting the zorder property in addition
to the rotation property.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
The planes don't care about DPMS states, don't propagate it
unnecessarily to the plane functions.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Remove the CRTC private planes by switching to the universal plane API.
This results in a merge of the CRTC private plane created by the driver
(omap_crtc->plane) and the CRTC primary plane created by the DRM core
(crtc->primary).
Reference counting of the framebuffers in the update plane operation is
thus simplified as no reference needs to be stored in the private plane
anymore.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
The ilace variable is unused and the replication variable is assigned to
false and just passed to a function. Remove them.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Create a omap_modeset_create_crtc() function to avoid duplicating plane
and CRTC creation code.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
DISPC can drive data lines either on rising or falling pixel clock edge,
which can be configured by the user.
Sync lines can also be driven on rising or falling pixel clock edge, but
additionally the HW can be configured to drive the sync lines on
opposite clock edge from the data lines.
This opposite edge setting does not make any sense, as the same effect
can be achieved by just setting the sync lines to be driven on the other
edge compared to the data lines. It feels like some kind of backward
compatibility option, even if all DSS versions seem to have the same
implementation.
To simplify the code and configuration of the signals, and to make the
dispc timings more compatible with what is used on other platforms,
let's just remove the whole opposite-edge support.
The drivers that used OMAPDSS_DRIVE_SIG_OPPOSITE_EDGES setting are
changed so that they use the opposite setting from the data edge.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Make drm_fb_helper_initial_config() return an int rather than a bool so
that the error can be properly propagated. While at it, update drivers
to propagate errors further rather than just ignore them.
v2:
- cirrus: No cleanup is required, the top-level cirrus_driver_load()
will do it as part of cirrus_driver_unload() in its cleanup path.
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
[danvet: Squash in simplification patch from kbuild.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Pull drm updates from Dave Airlie:
"Highlights:
- AMD KFD driver merge
This is the AMD HSA interface for exposing a lowlevel interface for
GPGPU use. They have an open source userspace built on top of this
interface, and the code looks as good as it was going to get out of
tree.
- Initial atomic modesetting work
The need for an atomic modesetting interface to allow userspace to
try and send a complete set of modesetting state to the driver has
arisen, and been suffering from neglect this past year. No more,
the start of the common code and changes for msm driver to use it
are in this tree. Ongoing work to get the userspace ioctl finished
and the code clean will probably wait until next kernel.
- DisplayID 1.3 and tiled monitor exposed to userspace.
Tiled monitor property is now exposed for userspace to make use of.
- Rockchip drm driver merged.
- imx gpu driver moved out of staging
Other stuff:
- core:
panel - MIPI DSI + new panels.
expose suggested x/y properties for virtual GPUs
- i915:
Initial Skylake (SKL) support
gen3/4 reset work
start of dri1/ums removal
infoframe tracking
fixes for lots of things.
- nouveau:
tegra k1 voltage support
GM204 modesetting support
GT21x memory reclocking work
- radeon:
CI dpm fixes
GPUVM improvements
Initial DPM fan control
- rcar-du:
HDMI support added
removed some support for old boards
slave encoder driver for Analog Devices adv7511
- exynos:
Exynos4415 SoC support
- msm:
a4xx gpu support
atomic helper conversion
- tegra:
iommu support
universal plane support
ganged-mode DSI support
- sti:
HDMI i2c improvements
- vmwgfx:
some late fixes.
- qxl:
use suggested x/y properties"
* 'drm-next' of git://people.freedesktop.org/~airlied/linux: (969 commits)
drm: sti: fix module compilation issue
drm/i915: save/restore GMBUS freq across suspend/resume on gen4
drm: sti: correctly cleanup CRTC and planes
drm: sti: add HQVDP plane
drm: sti: add cursor plane
drm: sti: enable auxiliary CRTC
drm: sti: fix delay in VTG programming
drm: sti: prepare sti_tvout to support auxiliary crtc
drm: sti: use drm_crtc_vblank_{on/off} instead of drm_vblank_{on/off}
drm: sti: fix hdmi avi infoframe
drm: sti: remove event lock while disabling vblank
drm: sti: simplify gdp code
drm: sti: clear all mixer control
drm: sti: remove gpio for HDMI hot plug detection
drm: sti: allow to change hdmi ddc i2c adapter
drm/doc: Document drm_add_modes_noedid() usage
drm/i915: Remove '& 0xffff' from the mask given to WA_REG()
drm/i915: Invert the mask and val arguments in wa_add() and WA_REG()
drm: Zero out DRM object memory upon cleanup
drm/i915/bdw: Fix the write setting up the WIZ hashing mode
...
Commit f9b9faf6d94dd29eab8c128905c7d091f955481d "drm: flip-work: change
drm_flip_work_init prototype" changed the drm_flip_work_init prototype
to a void function, which makes 'ret' an unused variable.
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Some drivers erroneously treat the .pitch and .size fields of struct
drm_mode_create_dumb as inputs. While the include/uapi/drm/drm_mode.h
header has a comment denoting them as outputs, that seemingly wasn't
enough to make drivers use them properly.
The result is that some userspace doesn't explicitly zero out those
fields, assuming that the kernel won't use them. That causes problems
since the data within the structure might be uninitialized, so bogus
data may end up confusing drivers (ridiculously large values for the
pitch, ...).
This series attempts to improve the situation by fixing all drivers to
not use the output fields. Furthermore to spare new drivers this bad
surprise, the DRM core now zeros out these fields prior to handing the
data structure to the driver.
Lessons learned from this are that future IOCTLs should be properly
documented (in the DRM DocBook for example) and should be rigorously
defined. To prevent misuse like this, userspace should be required to
zero out all output fields. The kernel should check for this and fail
if that's not the case.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=QZIW
-----END PGP SIGNATURE-----
Merge tag 'drm/gem-cma/for-3.19-rc1' of git://people.freedesktop.org/~tagr/linux into drm-next
drm: Sanitize DRM_IOCTL_MODE_CREATE_DUMB input
Some drivers erroneously treat the .pitch and .size fields of struct
drm_mode_create_dumb as inputs. While the include/uapi/drm/drm_mode.h
header has a comment denoting them as outputs, that seemingly wasn't
enough to make drivers use them properly.
The result is that some userspace doesn't explicitly zero out those
fields, assuming that the kernel won't use them. That causes problems
since the data within the structure might be uninitialized, so bogus
data may end up confusing drivers (ridiculously large values for the
pitch, ...).
This series attempts to improve the situation by fixing all drivers to
not use the output fields. Furthermore to spare new drivers this bad
surprise, the DRM core now zeros out these fields prior to handing the
data structure to the driver.
Lessons learned from this are that future IOCTLs should be properly
documented (in the DRM DocBook for example) and should be rigorously
defined. To prevent misuse like this, userspace should be required to
zero out all output fields. The kernel should check for this and fail
if that's not the case.
* tag 'drm/gem-cma/for-3.19-rc1' of git://people.freedesktop.org/~tagr/linux:
drm/cma: Remove call to drm_gem_free_mmap_offset()
drm: Sanitize DRM_IOCTL_MODE_CREATE_DUMB input
drm/rcar: gem: dumb: pitch is an output
drm/omap: gem: dumb: pitch is an output
drm/cma: Introduce drm_gem_cma_dumb_create_internal()
drm/doc: Add GEM/CMA helpers to kerneldoc
drm/doc: mm: Fix indentation
drm/gem: Fix a few kerneldoc typos
Now that we're using lists instead of kfifo to store drm flip-work tasks
we do not need the size parameter passed to drm_flip_work_init function
anymore.
Moreover this function cannot fail anymore, we can thus remove the return
code.
Modify drm_flip_work_init users to take account of these changes.
[airlied: fixed two unused variable warnings]
Signed-off-by: Boris BREZILLON <boris.brezillon@free-electrons.com>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
When creating a dumb buffer object using the DRM_IOCTL_MODE_CREATE_DUMB
IOCTL, only the width, height, bpp and flags fields are inputs. The
caller is not guaranteed to zero out or set handle, pitch and size.
Drivers must not treat these values as possible inputs, otherwise they
may use uninitialized memory during the computation of the framebuffer
size.
The OMAP driver uses the pitch field passed in by userspace as a minimum
and only override it if the driver-computed pitch is larger than what
userspace provided. To prevent this from causing overallocation, fix the
minimum pitch to 0 to enforce the driver-computed pitch.
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Acked-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Just a bit of OCD cleanup on headers - this function isn't the core
interface any more but just a helper for drivers who haven't yet
transitioned to universal planes. Put the declaration at the right
spot and sprinkle necessary #includes over all drivers.
Maybe this helps to encourage driver maintainers to do the switch.
v2: Fix #include ordering for tegra, reported by 0-day builder.
v3: Include required headers, reported by Thierry.
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Thierry Reding <treding@nvidia.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
