This patch defines TRANS_CONF registers for DSI ports
0 and 1. Bitfields of these registers used for enabling
and reading the current state of transcoder.
v2: Add blank line before comment
v3 by Jani:
- Move DSI specific .pipe_offsets to GEN11_FEATURES
- Macro placement and comment juggling
Signed-off-by: Madhav Chauhan <madhav.chauhan@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/3aa11e41ea0d4eb434423cc5ddf0a63b19d54deb.1539613303.git.jani.nikula@intel.com
As part of DSI enable sequence, transcoder timings
(horizontal & vertical) need to be set so that transcoder
will generate the stream output as per those timings.
This patch set required transcoder timings as per BSPEC.
v2: Remove TRANS_TIMING_SHIFT usage
v3 by Jani:
- Rebase
- Reduce temp variable use
- Checkpatch fix
Signed-off-by: Madhav Chauhan <madhav.chauhan@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/525949ae4e919a4f2b807d606234322534656048.1539613303.git.jani.nikula@intel.com
This patch defines TRANS_DDI_FUNC_CTL and TRANS_DDI_FUNC_CTL2
registers and their bitfields for DSI. These registers are used
for enabling port sync mode, input pipe select, data lane width
configuration etc.
v2: Changes:
- Remove redundant extra line
- Correct some of bitfield definition
v3 by Jani:
- Move DSI transcoder offsets to GEN11_FEATURES
Signed-off-by: Madhav Chauhan <madhav.chauhan@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/6b2d87db82660320be10e423742cbf5a31e18037.1539613303.git.jani.nikula@intel.com
We wrongly assumed that GuC is only using last scratch register
for G2H messages, but in fact it is also using register [14] to
report sleep state status. Remove that register from our H2G
send registers pool.
v2: No message from host to GuC uses more than 8 registers and
the GuC FW itself uses an 8-element array to store the H2G message,
so we may reduce our send array to just 8 registers (Daniele)
v3: use explicit define (Daniele)
v4: and explicit comment (Daniele)
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20181019101725.14024-1-michal.wajdeczko@intel.com
This patch programs DSI operation mode, pixel format,
BGR info, link calibration etc for the DSI transcoder.
This patch also extract BGR info of the DSI panel from
VBT and save it inside struct intel_dsi which used for
configuring DSI transcoder.
v2: Rebase
v3: Use newly defined bitfields.
v4 by Jani:
- Use intel_dsi_bitrate()
- Make bgr_enabled bool
- Use 0 instead of 0x0
- Replace DRM_ERROR() with MISSING_CASE() on pixel format and video mode
- Use is_vid_mode()
Signed-off-by: Madhav Chauhan <madhav.chauhan@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/7de4e39a4b2a18e53a2b9d9cea5b5b4c9d6eeb34.1539613303.git.jani.nikula@intel.com
This patch defines transcoder function configuration
registers and its bitfields for both DSI ports.
Used while programming/enabling DSI transcoder.
v2: Changes (Jani N)
- Define _SHIFT and _MASK for bitfields
- Define values for fields already shifted in place
v3 by Jani:
- Fix _SHIFT fields copy-pasted from _MASK
- Indentation fixes
- Reduce S3D orientation to single macro
- Wrap a macro parameter in parens
Signed-off-by: Madhav Chauhan <madhav.chauhan@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/f188d3e59f27cbcac87d331af3d0222249db7fe4.1539613303.git.jani.nikula@intel.com
This patch programs D-PHY timing parameters for the
bus turn around flow(in escape clocks) only if dsi link
frequency <=800 MHz using DPHY_TA_TIMING_PARAM and its
identical register DSI_TA_TIMING_PARAM (inside DSI
Controller within the Display Core).
v2: Changes
- Don't use KHz() macro (Ville/Jani N)
- Use newly defined bitfields
v3 by Jani:
- Use intel_dsi_bitrate() in favor of a new field
- Remove redundant parens
Signed-off-by: Madhav Chauhan <madhav.chauhan@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/2c777092a748dfc973714399d8c19ed7a8c31a10.1539613303.git.jani.nikula@intel.com
This patch programs D-PHY timing parameters for the
clock and data lane (in escape clocks) of DSI
controller (DSI port 0 and 1).
These programmed timings would be used by DSI Controller
to calculate link transition latencies of the data and
clock lanes.
v2: Use newly defined bitfields for data and clock lane
v3 by Jani:
- Rebase on dphy abstraction
- Reduce local variables
- Remove unrelated comment changes (Ville)
- Use the same style for range checks as VLV (Ville)
- Assign, don't OR dphy_reg contents
Signed-off-by: Madhav Chauhan <madhav.chauhan@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/70d491e2357f328a63b67ea3c43cb57a1d469c15.1539613303.git.jani.nikula@intel.com
Currently the guest couldn't boot up under GVT-g environment as the
following call trace exists:
[ 272.504762] BUG: unable to handle kernel NULL pointer dereference at 0000000000000100
[ 272.504834] Call Trace:
[ 272.504852] execlists_context_pin+0x2b2/0x520 [i915]
[ 272.504869] intel_gvt_scan_and_shadow_workload+0x50/0x4d0 [i915]
[ 272.504887] intel_vgpu_create_workload+0x3e2/0x570 [i915]
[ 272.504901] intel_vgpu_submit_execlist+0xc0/0x2a0 [i915]
[ 272.504916] elsp_mmio_write+0xc7/0x130 [i915]
[ 272.504930] intel_vgpu_mmio_reg_rw+0x24a/0x4c0 [i915]
[ 272.504944] intel_vgpu_emulate_mmio_write+0xac/0x240 [i915]
[ 272.504947] intel_vgpu_rw+0x22d/0x270 [kvmgt]
[ 272.504949] intel_vgpu_write+0x164/0x1f0 [kvmgt]
GVT GEM context is created by i915_gem_context_create_gvt() which
doesn't allocate ppgtt. So GVT GEM context structure doesn't have
a valid i915_hw_ppgtt.
This patch create ppgtt table at GVT GEM context creation, then assign
shadow ppgtt's root table address to this ppgtt when shadow ppgtt will
be used on GPU. So GVT GEM context has valid ppgtt address. But note
that this ppgtt only contain valid ppgtt root table address, the table
entry in this ppgtt structure are invalid.
Fixes:4a3d3f6785be("drm/i915: Match code to comment and enforce ppgtt for execlists")
Signed-off-by: Xiong Zhang <xiong.y.zhang@intel.com>
Reviewed-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/1539841231-3157-1-git-send-email-xiong.y.zhang@intel.com
Replace the kvmalloc_array() with i915_gem_object_get_dma_address() when
populating rotated vmas. One random access mechanism ought to be enough
for everyone?
To calculate the size of the radix tree I think we can do
something like this (assuming 64bit pointers):
num_pages = obj_size / 4096
tree_height = ceil(log64(num_pages))
num_nodes = sum(64^n, n, 0, tree_height-1)
tree_size = num_nodes * 576
If we compare that with the object size we should get a relative
overhead of around .2% to 1% for reasonable sized objects,
which framebuffers tend to be.
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Suggested-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181016150413.11577-1-ville.syrjala@linux.intel.com
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Use single exit point to drop rpm wakeref in case of an error.
Fixes: 9d3eb2c33f ("drm/i915: Hold rpm wakeref for debugfs/i915_drop_caches_set")
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20181018092025.24076-1-joonas.lahtinen@linux.intel.com
The test requires driver tweaks to avoid causing error messages
on intentionally-triggered errors and to stop accessing non
existing register. However, this is a pure GuC FW interface test
and should be covered by FW validation, so it isn't really worth
tweaking the driver for it and we're better off dropping it instead.
Testing the driver running out of doorbells is already covered by
igt_guc_doorbells
Suggested-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20181018004610.22895-1-daniele.ceraolospurio@intel.com
intel_dsi_vbt_init() has grown too unwieldy, and it's about to be
modified due to ICL DSI. Abstract out the VLV specific dphy param
init. No functional changes. Intentionally no stylistic changes during
code movement.
Cc: Madhav Chauhan <madhav.chauhan@intel.com>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Reviewed-by: Madhav Chauhan <madhav.chauhan@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/96d15760db027a137f298ec330520ef8ec6474b0.1539613303.git.jani.nikula@intel.com
Encoders are not alike, make enable and disable hooks optional like
other hooks. Utilize this in DSI code, and remove the silly nop hook.
v2: Add the check also to intel_sanitize_encoder() (Madhav)
Reviewed-by: Madhav Chauhan <madhav.chauhan@intel.com>
Acked-by: Ville Syrjala <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181016124134.10257-1-jani.nikula@intel.com
In response for I915_PARAM_HAS_HUC we are returning value that
indicates if HuC firmware was loaded and verified. However, our
previously used positive value was based on specific register bit
which is about to change on future platform. Let's normalize our
return values to 0 and 1 before clients will start to use Gen9 value.
v2: use bool for implicit conversion (Chris)
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Michal Winiarski <michal.winiarski@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Haihao Xiang <haihao.xiang@intel.com>
Reviewed-by: Michał Winiarski <michal.winiarski@intel.com> #1
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20181017195245.39644-1-michal.wajdeczko@intel.com
GEM_WARN_ON currently has dangerous semantics where it is completely
compiled out on !GEM_DEBUG builds. This can leave users who expect it to
be more like a WARN_ON, just without a warning in non-debug builds, in
complete ignorance.
Another gotcha with it is that it cannot be used as a statement. Which is
again different from a standard kernel WARN_ON.
This patch fixes both problems by making it behave as one would expect.
It can now be used both as an expression and as statement, and also the
condition evaluates properly in all builds - code under the conditional
will therefore not unexpectedly disappear.
To satisfy call sites which really want the code under the conditional to
completely disappear, we add GEM_DEBUG_WARN_ON and convert some of the
callers to it. This one can also be used as both expression and statement.
>From the above it follows GEM_DEBUG_WARN_ON should be used in situations
where we are certain the condition will be hit during development, but at
a place in code where error can be handled to the benefit of not crashing
the machine.
GEM_WARN_ON on the other hand should be used where condition may happen in
production and we just want to distinguish the level of debugging output
emitted between the production and debug build.
v2:
* Dropped BUG_ON hunk.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: Tomasz Lis <tomasz.lis@intel.com>
Reviewed-by: Tomasz Lis <tomasz.lis@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181012063142.16080-1-tvrtko.ursulin@linux.intel.com
Since when it was introduced we forgot to add
this case so ICL was using a wrong signal_levels
as reference.
Fixes: fb5c8e9d43 ("drm/i915/icl: Implement voltage swing programming sequence for Combo PHY DDI")
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181017215652.26841-1-rodrigo.vivi@intel.com
Unfortunately, it appears our fix in:
commit b5d29843d8 ("drm/atomic_helper: Allow DPMS On<->Off changes
for unregistered connectors")
Which attempted to work around the problems introduced by:
commit 4d80273976 ("drm/atomic_helper: Disallow new modesets on
unregistered connectors")
Is still not the right solution, as modesets can still be triggered
outside of drm_atomic_set_crtc_for_connector().
So in order to fix this, while still being careful that we don't break
modesets that a driver may perform before being registered with
userspace, we replace connector->registered with a tristate member,
connector->registration_state. This allows us to keep track of whether
or not a connector is still initializing and hasn't been exposed to
userspace, is currently registered and exposed to userspace, or has been
legitimately removed from the system after having once been present.
Using this info, we can prevent userspace from performing new modesets
on unregistered connectors while still allowing the driver to perform
modesets on unregistered connectors before the driver has finished being
registered.
Changes since v1:
- Fix WARN_ON() in drm_connector_cleanup() that CI caught with this
patchset in igt@drv_module_reload@basic-reload-inject and
igt@drv_module_reload@basic-reload by checking if the connector is
registered instead of unregistered, as calling drm_connector_cleanup()
on a connector that hasn't been registered with userspace yet should
stay valid.
- Remove unregistered_connector_check(), and just go back to what we
were doing before in commit 4d80273976 ("drm/atomic_helper: Disallow
new modesets on unregistered connectors") except replacing
READ_ONCE(connector->registered) with drm_connector_is_unregistered().
This gets rid of the behavior of allowing DPMS On<->Off, but that should
be fine as it's more consistent with the UAPI we had before - danvet
- s/drm_connector_unregistered/drm_connector_is_unregistered/ - danvet
- Update documentation, fix some typos.
Fixes: b5d29843d8 ("drm/atomic_helper: Allow DPMS On<->Off changes for unregistered connectors")
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: stable@vger.kernel.org
Cc: David Airlie <airlied@linux.ie>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20181016203946.9601-1-lyude@redhat.com
The ENTER/EXIT_S_STATE actions queue the save/restore operation in GuC
FW and then return, so waiting on the H2G is not enough to guarantee
GuC is done.
When all the processing is done, GuC writes 0 to scratch register 14,
so we can poll on that. Note that GuC does not ensure that the value
in the register is different from 0 while the action is in progress
so we need to take care of that ourselves as well.
v2: improve comment, return early on GuC error and improve error
message (Michal)
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20181016224648.2326-1-daniele.ceraolospurio@intel.com
If BIOS configured a Y tiled FB we failed to set up the backing object
tiling accordingly, leading to a lack of GT fence installed and a
garbled console.
The problem was bisected to
commit 011f22eb54 ("drm/i915: Do NOT skip the first 4k of stolen memory for pre-allocated buffers v2")
but it just revealed a pre-existing issue.
Kudos to Ville who suspected a missing fence looking at the corruption
on the screen.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: <ronald@innovation.ch>
Cc: <stable@vger.kernel.org>
Reported-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reported-by: <ronald@innovation.ch>
Tested-by: <ronald@innovation.ch>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=108264
Fixes: bc8d7dffac ("drm/i915/skl: Provide a Skylake version of get_plane_config()")
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181016160011.28347-1-imre.deak@intel.com
In commit 4502e9ec82 ("drm/i915/uc: Unify firmware loading") we
stopped converting errors detected during firmware transfer into
-EAGAIN and this indirectly killed our workarounds for Gen9 GuC.
Reactivate those workarounds by looking for actual -ETIMEDOUT error.
Testcase: igt@drv_selftest@live_hangcheck
Reported-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
References: commit 4502e9ec82 ("drm/i915/uc: Unify firmware loading")
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20181016085931.23532-1-michal.wajdeczko@intel.com
Clang build with UBSAN enabled leads to the following build error:
drivers/gpu/drm/i915/intel_engine_cs.o: In function `intel_engine_init_execlist':
drivers/gpu/drm/i915/intel_engine_cs.c:411: undefined reference to `__compiletime_assert_411'
Again, for this to work the code would first need to be inlined and then
constant folded, which doesn't work for Clang because semantic analysis
happens before optimization/inlining.
Use GEM_BUG_ON() instead of BUILD_BUG_ON().
v2: Use is_power_of_2() from log2.h (Chris)
References: http://mid.mail-archive.com/20181015203410.155997-1-swboyd@chromium.org
Reported-by: Stephen Boyd <swboyd@chromium.org>
Cc: Stephen Boyd <swboyd@chromium.org>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Tested-by: Nathan Chancellor <natechancellor@gmail.com>
Tested-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181016122938.18757-2-jani.nikula@intel.com
When building the kernel with Clang with defconfig and CONFIG_64BIT
disabled, vmlinux fails to link because of the BUILD_BUG in
_print_param.
ld: drivers/gpu/drm/i915/i915_params.o: in function `i915_params_dump':
i915_params.c:(.text+0x56): undefined reference to
`__compiletime_assert_191'
This function is semantically invalid unless the code is first inlined
then constant folded, which doesn't work for Clang because semantic
analysis happens before optimization/inlining.
[The above written by Nathan Chancellor <natechancellor@gmail.com>]
Use WARN_ONCE() instead of BUILD_BUG() to avoid the problem. The
WARN_ONCE() should get optimized away unless there's a type that's not
handled by _print_param().
References: https://github.com/ClangBuiltLinux/linux/issues/191
References: http://mid.mail-archive.com/20181009171401.14980-1-natechancellor@gmail.com
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Nathan Chancellor <natechancellor@gmail.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reported-by: Nick Desaulniers <ndesaulniers@google.com>
Reported-by: Nathan Chancellor <natechancellor@gmail.com>
Tested-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181016122938.18757-1-jani.nikula@intel.com
Rename intel_get_pipe_from_connector() to intel_connector_get_pipe() and
move it near its connector function friends in intel_connector.c. No
functional changes.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181016145044.3924-1-jani.nikula@intel.com
DDI/TC clock-off bits are not equally distanced. TC1-3 bits are
from offset 12 & TC4 is at offset 21.
Create a function to choose correct clk-off bit.
v2: Add fixes tag (Lucas)
Fixes: c27e917e2b ("drm/i915/icl: add basic support for the ICL clocks")
Signed-off-by: Mahesh Kumar <mahesh1.kumar@intel.com>
Signed-off-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181016023752.9285-1-lucas.demarchi@intel.com
combo-phy register instances are at same offset from base for each
combo-phy port, i.e.
Port A base offset: 0x16200
Port B base offset: 0x6C000
All the other addresses for both ports can be derived by calculating
offset to these base addresses.
PORT_CL_DW_OFFSET 0x0
PORT_CL_DW<x> 0 + x * 4
PORT_COMP_OFFSET 0x100
PORT_COMP_DW<x> 0x100 + x * 4
PORT_PCS_AUX_OFFSET 0x300
PORT_PCS_GRP_OFFSET 0x600
PORT_PCS_LN<y>_OFFSET 0x800 + y * 0x100
PORT_TX_AUX_OFFSET 0x380
PORT_TX_GRP_OFFSET 0x680
PORT_TX_LN<y>_OFFSET 0x880 + y * 0x100
And inside each PORT_TX_[AUX|GRP|LN] we add `dw * 4`.
Based on original patch by Mahesh Kumar <mahesh1.kumar@intel.com>.
v2: make port, dw and ln arguments follow the order in
register's name
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Mahesh Kumar <mahesh1.kumar@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181016023517.8576-1-lucas.demarchi@intel.com
This patch combines CNL/ICL specific port/combophy macros together
at one location. This is prework for patches later in series where
new macros to find port/combophy register will be introduced.
v2: remove wrong empty line
Signed-off-by: Mahesh Kumar <mahesh1.kumar@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181012234717.8284-1-lucas.demarchi@intel.com
This patch adds helper function for identifying
whether the given PLL is combo PHY PLL or not.
This helper function is used inside various ICL
functions to make them scalable.
Signed-off-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Signed-off-by: Mahesh Kumar <mahesh1.kumar@intel.com>
Cc: Madhav Chauhan <madhav.chauhan@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181003072203.12848-6-mahesh1.kumar@intel.com
Use intel_port_is_tc and intel_port_is_combophy
functions to replace the individual port checks
from port C to F and port A to B respectively.
Signed-off-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Signed-off-by: Mahesh Kumar <mahesh1.kumar@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Madhav Chauhan <madhav.chauhan@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181003072203.12848-5-mahesh1.kumar@intel.com
Use the existing port-to-id helper function, to refactor
hence making it scalable.
Signed-off-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Signed-off-by: Mahesh Kumar <mahesh1.kumar@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Madhav Chauhan <madhav.chauhan@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181003072203.12848-4-mahesh1.kumar@intel.com
This patch creates a function/wrapper to check if port is combophy port
instead of explicitly comparing ports.
Changes since V1:
- keep all intel_port_is_* helper together (Lucas)
Signed-off-by: Mahesh Kumar <mahesh1.kumar@intel.com>
Cc: Madhav Chauhan <madhav.chauhan@intel.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181004085043.10154-1-mahesh1.kumar@intel.com
Display WA #1178 is meant to fix Aux channel voltage swing too low with
some type C dongles. It applies to external ports on combo phy. On
Icelake this is port A and B when those are not eDP.
v2: follow the spec to the letter: include Aux A and just check if it's
not eDP instead of checking only for Aux B.
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181012215758.25342-1-lucas.demarchi@intel.com
has_drrs is a flag we can't read out. We set it when seamless DRRS is
enabled in pipe_config, so intel_dump_pipe_config() and
intel_pipe_config_compare() will continue to do the right thing when
has_drrs is set on the real state.
This removes one more dereference of crtc->config.
While at it, fixup the comment and also read out M2_N2 for CHV, since
we program it in the set_m_n function.
Changes since v1:
- Only read out M2/N2 on platforms that support DRRS.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181015094023.6211-1-maarten.lankhorst@linux.intel.com
