PCI I/O and MEM ranges are corrected across all targets with PCIe
enabled. Likewise is CPU clocks defined to be provided from CPUfreq for
a wide range of platforms, to satisfy the OPP definitions, and LLCC bank
information is corrected for all relevant platforms.
IPQ5332 gains SMEM, CPUfreq and support for triggering download mode.
The MI01.2 board is introduced.
On MSM8916 WCN compatibles are moved to be defined per board, to avoid
issues when boards rely on the incorrect defaults. Support for Yiming
UZ801 4G modem stick is introduced.
XO clock is defined and fed to RPMCC on MSM8953 and MSM8976, to ensure
clock trees are properly rooted. DSI clocks feeding into gcc are
described on MSM8953.
On MSM8996 the external audio components are moved from the SoC dtsi. A
few DWC3 quirks are added.
On MSM8998 GPIO names are introduced for Sony Xperia XZ Premium, XZ1 and
XZ1 Compact. A numbe of boards have GPIO keys properly marked as
wakeup-source.
The SA8775P platform is extended with CPUfreq, UARTs, I2C controllers,
SPI controllers, SPMI and PMICs, PDC support. The associated PMICs gains
reset and power key support, as well as thermal zones defined. Nodes are
sorted. On top of this the SA8775P Ride board/platform is introduced.
On SC7180 and SC7280 a range of fixes coming from DeviceTree validation are
introduced, some clearing up unused properties, others correcting
errors. A number of Google rev0 boards on SC7180 are dropped, as these
are not considered to be in use by anyone anymore.
On SC8280XP RTC support is introduced and enabled for the CRD and Lenovo
Thinkpad X13s. It gains another UART, upon which Bluetooth is enabled on
the Lenovo ThinkPad X13s. The touchpad definition is altered to attempt
to probe both devices seen in the wild. A number of bug fixes are also
introduced, and the regulator definitions on X13s are corrected.
On SDM845 dynamic power coefficients are improved. BWMON compatible is
corrected. Xiaomi Pocophone F1 gains notification LED. Sony Xperia XZ2,
XZ2 Compact and XZ3 gains display, touchscreen, gpu and remoteproc
support. OnePlus 6 and 6T gains hall sensor.
GPU clock controller and remoteproc nodes are added for SM6115. CPU
clock are defined to come from CPUfreq. Board-specific USB-properties
are moved out of the SoC dtsi.
On SM6375 L3 scaling, IMEM, RMTFS, RPM sleep stats, Tsens, modem
remoteproc and WiFi nodes are added. Tsens thermal zones are defined and additional low power states
are defined. Sony Xperia 10 IV gains volume down key support.
On SM8150 another UART is introduced, to be used by GNSS on the SA8155
ADP. Support for the Flash LED block in PM8150L is added.
On SM8250 TPDM MM and PRNG is defined, MHI region is added to PCIe node.
A few bug fixes are introduced after Devicetree validation.
The DisplayPort controller on both SM8350 and SM8450 is defined and the
related QMP instance is transitioned to the USB3/DP combo variant. IMEM
and PIL info is introduced, for post mortem debugging of remoteprocs. On
the HDK PMIC GLINK is enabled and role switch is enabled. Some audio
resources are corrected.
A typo in the USB role property of the Microsoft Surface is corrected,
thanks to DeviceTree validation.
PCIe controllers and PHYs descriptions are corrected, and pinctrl state
definitions are moved from the soc to the board definition. BWMON
compatibles are corrected. PM8550B gains the definition of the eUSB2
repeater and this is enabled on the MTP. PMIC GLINK is also defined for
the MTP and connected to DWC3, for role switching support.
In addition to this, a range of cleanups based on Devicetree validation
is introduced.
A few clock bindings are introduced, from topic-branches shared with the
clock tree, to aid introduction of references to these.
-----BEGIN PGP SIGNATURE-----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=ZyN2
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=OcHF
-----END PGP SIGNATURE-----
Merge tag 'qcom-arm64-for-6.4' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt
Qualcomm ARM64 updates for v6.4
PCI I/O and MEM ranges are corrected across all targets with PCIe
enabled. Likewise is CPU clocks defined to be provided from CPUfreq for
a wide range of platforms, to satisfy the OPP definitions, and LLCC bank
information is corrected for all relevant platforms.
IPQ5332 gains SMEM, CPUfreq and support for triggering download mode.
The MI01.2 board is introduced.
On MSM8916 WCN compatibles are moved to be defined per board, to avoid
issues when boards rely on the incorrect defaults. Support for Yiming
UZ801 4G modem stick is introduced.
XO clock is defined and fed to RPMCC on MSM8953 and MSM8976, to ensure
clock trees are properly rooted. DSI clocks feeding into gcc are
described on MSM8953.
On MSM8996 the external audio components are moved from the SoC dtsi. A
few DWC3 quirks are added.
On MSM8998 GPIO names are introduced for Sony Xperia XZ Premium, XZ1 and
XZ1 Compact. A numbe of boards have GPIO keys properly marked as
wakeup-source.
The SA8775P platform is extended with CPUfreq, UARTs, I2C controllers,
SPI controllers, SPMI and PMICs, PDC support. The associated PMICs gains
reset and power key support, as well as thermal zones defined. Nodes are
sorted. On top of this the SA8775P Ride board/platform is introduced.
On SC7180 and SC7280 a range of fixes coming from DeviceTree validation are
introduced, some clearing up unused properties, others correcting
errors. A number of Google rev0 boards on SC7180 are dropped, as these
are not considered to be in use by anyone anymore.
On SC8280XP RTC support is introduced and enabled for the CRD and Lenovo
Thinkpad X13s. It gains another UART, upon which Bluetooth is enabled on
the Lenovo ThinkPad X13s. The touchpad definition is altered to attempt
to probe both devices seen in the wild. A number of bug fixes are also
introduced, and the regulator definitions on X13s are corrected.
On SDM845 dynamic power coefficients are improved. BWMON compatible is
corrected. Xiaomi Pocophone F1 gains notification LED. Sony Xperia XZ2,
XZ2 Compact and XZ3 gains display, touchscreen, gpu and remoteproc
support. OnePlus 6 and 6T gains hall sensor.
GPU clock controller and remoteproc nodes are added for SM6115. CPU
clock are defined to come from CPUfreq. Board-specific USB-properties
are moved out of the SoC dtsi.
On SM6375 L3 scaling, IMEM, RMTFS, RPM sleep stats, Tsens, modem
remoteproc and WiFi nodes are added. Tsens thermal zones are defined and additional low power states
are defined. Sony Xperia 10 IV gains volume down key support.
On SM8150 another UART is introduced, to be used by GNSS on the SA8155
ADP. Support for the Flash LED block in PM8150L is added.
On SM8250 TPDM MM and PRNG is defined, MHI region is added to PCIe node.
A few bug fixes are introduced after Devicetree validation.
The DisplayPort controller on both SM8350 and SM8450 is defined and the
related QMP instance is transitioned to the USB3/DP combo variant. IMEM
and PIL info is introduced, for post mortem debugging of remoteprocs. On
the HDK PMIC GLINK is enabled and role switch is enabled. Some audio
resources are corrected.
A typo in the USB role property of the Microsoft Surface is corrected,
thanks to DeviceTree validation.
PCIe controllers and PHYs descriptions are corrected, and pinctrl state
definitions are moved from the soc to the board definition. BWMON
compatibles are corrected. PM8550B gains the definition of the eUSB2
repeater and this is enabled on the MTP. PMIC GLINK is also defined for
the MTP and connected to DWC3, for role switching support.
In addition to this, a range of cleanups based on Devicetree validation
is introduced.
A few clock bindings are introduced, from topic-branches shared with the
clock tree, to aid introduction of references to these.
* tag 'qcom-arm64-for-6.4' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (256 commits)
arm64: dts: qcom: sc8280xp-x13s: Add bluetooth
arm64: dts: qcom: sc8280xp: Define uart2
arm64: dts: qcom: sc8280xp: Add "mhi" region to the PCIe nodes
arm64: dts: qcom: sm8250: Add "mhi" region to the PCIe nodes
arm64: dts: qcom: sdm845: Add "mhi" region to the PCIe nodes
arm64: dts: qcom: sa8775p-ride: set gpio-line-names for PMIC GPIOs
arm64: dts: qcom: sa8775p: add PMIC GPIO controller nodes
arm64: dts: qcom: sa8775p: pmic: add thermal zones
arm64: dts: qcom: sa8775p: pmic: add support for the pmm8654 RESIN input
arm64: dts: qcom: sa8775p: pmic: add the power key
arm64: dts: qcom: sa8775p: add the Power On device node
arm64: dts: qcom: sa8775p: add support for the on-board PMICs
arm64: dts: qcom: sa8775p: add the spmi node
arm64: dts: qcom: sa8775p: add the pdc node
arm64: dts: qcom: sa8775p: sort soc nodes by reg property
arm64: dts: qcom: sa8775p: pad reg properties to 8 digits
arm64: dts: qcom: sc8280xp: correct Soundwire wakeup interrupt name
arm64: dts: qcom: sdm845-tama: Enable GPI_DMA0/1
arm64: dts: qcom: sdm845-tama: Enable GPU
arm64: dts: qcom: sdm845-tama: Enable remoteprocs
...
Link: https://lore.kernel.org/r/20230410170233.5931-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
stdout-path is defined for the ALFA Network AP120C-AC, to avoid the need
to pass this information on the kernel commandline. Ath10k is wired up
to read calibration data from the "ART" partition.
PCI I/O port ranges are fixed on IPQ4019 and IPQ8064.
Supply clocks are defined for KPSS L2CC and ACC clock controllers.
Supply clocks for the global clock controller are being specified on
IPQ4019, MSM8974 and MSM8226.
PCIe RC support is enabled on the SDX55 T55 development board, IPA is
defined for the SDX55 and a number of cleanup patches are introduced.
Compatibles for QRB2210/QCM2290, IPQ9574, QRD8550 and IPQ5332 platforms
are added, and the RB1, Yiming LTE dongle, Xiaomi Mi A3, MI01.2 and
MI01.6 boards.
-----BEGIN PGP SIGNATURE-----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=YUEe
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=a7tv
-----END PGP SIGNATURE-----
Merge tag 'qcom-dts-for-6.4' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt
Qualcomm ARM32 DeviceTree updates for v6.4
stdout-path is defined for the ALFA Network AP120C-AC, to avoid the need
to pass this information on the kernel commandline. Ath10k is wired up
to read calibration data from the "ART" partition.
PCI I/O port ranges are fixed on IPQ4019 and IPQ8064.
Supply clocks are defined for KPSS L2CC and ACC clock controllers.
Supply clocks for the global clock controller are being specified on
IPQ4019, MSM8974 and MSM8226.
PCIe RC support is enabled on the SDX55 T55 development board, IPA is
defined for the SDX55 and a number of cleanup patches are introduced.
Compatibles for QRB2210/QCM2290, IPQ9574, QRD8550 and IPQ5332 platforms
are added, and the RB1, Yiming LTE dongle, Xiaomi Mi A3, MI01.2 and
MI01.6 boards.
* tag 'qcom-dts-for-6.4' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (28 commits)
dt-bindings: arm: qcom: Add Yiming LTE dongle uz801-v3.0 (yiming-uz801v3)
dt-bindings: vendor-prefixes: Add Henan Yiming Technology Co., Ltd.
ARM: dts: qcom: sdx55: add dedicated SDX55 TCSR compatible
ARM: dts: qcom: sdx55-t55: Move "status" property down
ARM: dts: qcom: sdx55-t55: Enable PCIe RC support
ARM: dts: qcom: sdx55: List the property values vertically
ARM: dts: qcom: sdx55: Add support for PCIe RC controller
ARM: dts: qcom: sdx55: Rename pcie0_{phy/lane} to pcie_{phy/lane}
ARM: dts: qcom: sdx55: Fix the unit address of PCIe EP node
ARM: dts: qcom: ipq8064: Fix the PCI I/O port range
ARM: dts: qcom: ipq4019: Fix the PCI I/O port range
ARM: dts: qcom: apq8064: Use 0x prefix for the PCI I/O and MEM ranges
dt-bindings: arm: qcom: Add ipq9574 compatible
ARM: dts: qcom: msm8974: add correct XO clock source to GCC node
ARM: dts: qcom: msm8226: add clocks and clock-names to GCC node
ARM: dts: qcom: rename kpss-acc-v2 nodes to power-manager nodes
ARM: dts: qcom: add missing clock configuration for kpss-acc-v1
ARM: dts: qcom: add and fix clock configuration for kpss-gcc nodes
ARM: dts: qcom: add per SoC compatible for qcom,kpss-gcc nodes
dt-bindings: qcom: add ipq5332 boards
...
Link: https://lore.kernel.org/r/20230410155226.5127-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- Add vendor prefix for chargebyte.
- A bunch of new board compatibles: Tolino Vision, Toradex Apalis,
chargebyte Tarragon, i.MX8M Plus based boards from DH electronics
and Data Modul, etc.
- A series from Marek Vasut to improve blk-ctrl bindings.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAmQ2CqEUHHNoYXduZ3Vv
QGtlcm5lbC5vcmcACgkQUFdYWoewfM62WAf/cJ7W0MnV864M7GUBFKo4pO3brNFl
yumpJsbTtCDc5tl4h/UiLQeEq5rY3zudX8+nnMlkMT4uzSxjATmUMvLCnYb8Y8B8
sC2od3OXOn2xeR8XDL1OYTYFZ2NTj+V9n6IKd4y5DYfNSywLevUTenXG8JelC/OI
TAyMI1D+gjaB3dOs6V5Xoj7Pe9O5ImG3+Ev6scUGfEc95cDgJAeUxZ6cET2g55rN
0QUSlTFdNjw8S+DMEJcEIgiwg9kSJaSUJnVmSmijv6x0VE0Alo9ZBxChP8fY6Hve
GR0ks0MdhGgQWb4Gt8DdCkP5HakoKzVw0keUapiv2y0u/YqMdR540lphzQ==
=MLcb
-----END PGP SIGNATURE-----
Merge tag 'imx-bindings-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/dt
i.MX dt-bindings update for 6.4:
- Add vendor prefix for chargebyte.
- A bunch of new board compatibles: Tolino Vision, Toradex Apalis,
chargebyte Tarragon, i.MX8M Plus based boards from DH electronics
and Data Modul, etc.
- A series from Marek Vasut to improve blk-ctrl bindings.
* tag 'imx-bindings-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
dt-bindings: arm: Add Data Modul i.MX8M Plus eDM SBC
dt-bindings: arm: fsl: Add chargebyte Tarragon
dt-bindings: vendor-prefixes: add chargebyte
dt-bindings: soc: imx-blk-ctrl: Drop leading label in blk-ctrl in examples
dt-bindings: soc: imx8m-blk-ctrl: Rename blk_ctrl to blk-ctrl in examples
dt-bindings: arm: Add DH electronics i.MX8M Plus DHCOM on PDK3
dt-bindings: arm: fsl: add compatible string for Tolino Vision
dt-bindings: arm: fsl: Add Y Soft IOTA Phoenix, Lynx, Pegasus and Pegasus+
dt-bindings: arm: fsl: Add colibri-imx8x carrier boards
dt-bindings: soc: imx8mp-media-blk-ctrl: Add LDB subnode into schema and example
dt-bindings: soc: imx8mp-media-blk-ctrl: Align block controller example name
dt-bindings: arm: fsl: Fix copy-paste error in comment
dt-bindings: arm: fsl: add toradex,apalis-imx8 et al.
Microchip:
A "fix" for the system controller's regs on PolarFire SoC, adding a
missing reg property.
The patch had been sitting there for months and I only re-found it
recently, so you can guess how much of a "fix" it actually is. It'll
become needed when the system controller's QSPI gets added in the future,
but at present there's no urgency as the driver can handle both the
current and "fixed" versions.
StarFive:
Basic support for the JH7110 & the associated first-party dev board, the
VisionFive v2 (in two forms). There's a bunch of dt-bindings required
for this too, all of which have had input from the DT folk. There's
enough in this tag to boot to a console w/ an initramfs but little more.
The SoC supports some of the "new" bit manipulation instructions, which
is a good test for the recently added Zbb support in the kernel.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRh246EGq/8RLhDjO14tDGHoIJi0gUCZC8o6wAKCRB4tDGHoIJi
0pdpAP0Y0qkT5tZSV635h2XOrWBpW3D3Vpx6+LGmw2mRjhHVPgD+Mfe0LkP6Dbq3
JS6fMISbgMAG/8dqcys/e0gmHksYJAk=
=FsQ1
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=l6EI
-----END PGP SIGNATURE-----
Merge tag 'riscv-dt-for-v6.4' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux into soc/dt
RISC-V Devicetrees for v6.4
Microchip:
A "fix" for the system controller's regs on PolarFire SoC, adding a
missing reg property.
The patch had been sitting there for months and I only re-found it
recently, so you can guess how much of a "fix" it actually is. It'll
become needed when the system controller's QSPI gets added in the future,
but at present there's no urgency as the driver can handle both the
current and "fixed" versions.
StarFive:
Basic support for the JH7110 & the associated first-party dev board, the
VisionFive v2 (in two forms). There's a bunch of dt-bindings required
for this too, all of which have had input from the DT folk. There's
enough in this tag to boot to a console w/ an initramfs but little more.
The SoC supports some of the "new" bit manipulation instructions, which
is a good test for the recently added Zbb support in the kernel.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
* tag 'riscv-dt-for-v6.4' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux:
riscv: dts: starfive: Add StarFive JH7110 VisionFive 2 board device tree
riscv: dts: starfive: Add StarFive JH7110 pin function definitions
riscv: dts: starfive: Add initial StarFive JH7110 device tree
dt-bindings: riscv: Add SiFive S7 compatible
dt-bindings: interrupt-controller: Add StarFive JH7110 plic
dt-bindings: timer: Add StarFive JH7110 clint
dt-bindings: clock: Add StarFive JH7110 always-on clock and reset generator
dt-bindings: clock: Add StarFive JH7110 system clock and reset generator
riscv: dts: microchip: fix the mpfs' mailbox regs
riscv: dts: microchip: add mpfs specific macb reset support
Link: https://lore.kernel.org/r/20230406-shank-impromptu-3d483bbc249f@spud
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This adds support for the Jetson Orin NX and includes updates for Jetson
AGX Orin (audio codec, USB Type-C support).
-----BEGIN PGP SIGNATURE-----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=qCDN
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=xfIt
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-6.4-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into soc/dt
arm64: tegra: Device tree changes for v6.4-rc1
This adds support for the Jetson Orin NX and includes updates for Jetson
AGX Orin (audio codec, USB Type-C support).
* tag 'tegra-for-6.4-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
arm64: tegra: Add vccmq on Jetson TX2
arm64: tegra: Populate USB Type-C Controller for Jetson AGX Orin
arm64: tegra: Audio codec support on Jetson AGX Orin
arm64: tegra: Support Jetson Orin NX reference platform
arm64: tegra: Support Jetson Orin NX
dt-bindings: tegra: Document Jetson Orin NX reference platform
dt-bindings: tegra: Document Jetson Orin NX
arm64: tegra: Add DSU PMUs for Tegra234
arm64: tegra: Drop serial clock-names and reset-names
Link: https://lore.kernel.org/r/20230406124804.970394-6-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This is a single patch that drops unneeded quotes from various Tegra-
related device tree bindings.
-----BEGIN PGP SIGNATURE-----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=EW94
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=PQVQ
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-6.4-dt-bindings' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into soc/dt
dt-bindings: Changes for v6.4-rc1
This is a single patch that drops unneeded quotes from various Tegra-
related device tree bindings.
* tag 'tegra-for-6.4-dt-bindings' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
dt-bindings: arm: nvidia: Drop unneeded quotes
Link: https://lore.kernel.org/r/20230406124804.970394-4-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
1. Several cleanups and improvements as a result of dtbs_checks: align
node names with bindings, drop incorrect properties, fix clock-names,
add missing "ports" node.
2. Move DP and MIPI phys to PMU node (DTS with binding change).
3. Drop old MSHC aliases (while adding proper mmc-ddr-1_8v which was
selected by the driver based on the MSHC alias) and add generic MMC
aliases in each board. The aliases match known numbering in
the schematics.
-----BEGIN PGP SIGNATURE-----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=PGBg
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=nYVY
-----END PGP SIGNATURE-----
Merge tag 'samsung-dt-6.4' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into soc/dt
Samsung DTS ARM changes for v6.4
1. Several cleanups and improvements as a result of dtbs_checks: align
node names with bindings, drop incorrect properties, fix clock-names,
add missing "ports" node.
2. Move DP and MIPI phys to PMU node (DTS with binding change).
3. Drop old MSHC aliases (while adding proper mmc-ddr-1_8v which was
selected by the driver based on the MSHC alias) and add generic MMC
aliases in each board. The aliases match known numbering in
the schematics.
* tag 'samsung-dt-6.4' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
dt-bindings: soc: samsung: exynos-pmu: allow phys as child on Exynos3 and Exynos4
ARM: dts: exynos: add mmc aliases
ARM: dts: exynos: replace mshc0 alias with mmc-ddr-1_8v property
ARM: dts: exynos: fix MCT compatible in Universal C210
ARM: dts: exynos: move DP and MIPI phys to PMU node in Exynos5250
ARM: dts: exynos: move DP and MIPI phys to PMU node in Exynos5420
ARM: dts: exynos: move MIPI phy to PMU node in Exynos4
ARM: dts: exynos: move MIPI phy to PMU node in Exynos3250
ARM: dts: exynos: drop unused samsung,camclk-out property in Midas
ARM: dts: s5pv210: correct MIPI CSIS clock name
ARM: dts: exynos: correct whitespace in Midas
ARM: dts: exynos: fix WM8960 clock name in Itop Elite
ARM: dts: exynos: add ports to TC358764 bridge on Arndale
ARM: dts: exynos: drop fake align STMPE properties in P4 Note
ARM: dts: exynos: align STMPE ADC node name with bindings in P4 Note
Link: https://lore.kernel.org/r/20230405080438.156805-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
1. Exynos850: add headers with AUD, G3D and HSI clock controller clock
IDs. Add G3D (GPU) clock controller node.
2. Exynos5433: fixes for dtbs_check: move MIPI phy to PMU node.
3. Drop old MSHC aliases (while adding proper mmc-ddr-1_8v which was
selected by the driver based on the MSHC alias) and add generic MMC
aliases in each board. The aliases match known numbering in
the schematics.
-----BEGIN PGP SIGNATURE-----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=GkR1
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=kJMa
-----END PGP SIGNATURE-----
Merge tag 'samsung-dt64-6.4' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into soc/dt
Samsung DTS ARM64 changes for v6.4
1. Exynos850: add headers with AUD, G3D and HSI clock controller clock
IDs. Add G3D (GPU) clock controller node.
2. Exynos5433: fixes for dtbs_check: move MIPI phy to PMU node.
3. Drop old MSHC aliases (while adding proper mmc-ddr-1_8v which was
selected by the driver based on the MSHC alias) and add generic MMC
aliases in each board. The aliases match known numbering in
the schematics.
* tag 'samsung-dt64-6.4' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
arm64: dts: exynos: add mmc aliases
arm64: dts: exynos: drop mshc aliases
arm64: dts: exynos: Add CMU_G3D node for Exynos850 SoC
arm64: dts: exynos: move MIPI phy to PMU node in Exynos5433
dt-bindings: clock: exynos850: Add AUD and HSI main gate clocks
dt-bindings: clock: exynos850: Add Exynos850 CMU_G3D
Link: https://lore.kernel.org/r/20230405080438.156805-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This introduces a new binding and a dedicated driver for the Qualcomm
Inline-Crypto-Engine (ICE), in order to support a single shared instance
between SDHCI and UFS, found in recent platforms.
RSC version check is updated to support minor revisions of v3 of the ip
block, the SMD-RPM interface is transitioned to GFP_ATOMIC to avoid the
shrinker to kick in underneath the GPU and QCM2290 support is added to
the SCM binding.
-----BEGIN PGP SIGNATURE-----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=aZXM
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=D6Q8
-----END PGP SIGNATURE-----
Merge tag 'qcom-drivers-for-6.4-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/drivers
A few more Qualcomm driver updates for v6.4
This introduces a new binding and a dedicated driver for the Qualcomm
Inline-Crypto-Engine (ICE), in order to support a single shared instance
between SDHCI and UFS, found in recent platforms.
RSC version check is updated to support minor revisions of v3 of the ip
block, the SMD-RPM interface is transitioned to GFP_ATOMIC to avoid the
shrinker to kick in underneath the GPU and QCM2290 support is added to
the SCM binding.
* tag 'qcom-drivers-for-6.4-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
dt-bindings: crypto: Add Qualcomm Inline Crypto Engine
soc: qcom: Make the Qualcomm UFS/SDCC ICE a dedicated driver
dt-bindings: firmware: document Qualcomm QCM2290 SCM
soc: qcom: rpmh-rsc: Support RSC v3 minor versions
soc: qcom: smd-rpm: Use GFP_ATOMIC in write path
Link: https://lore.kernel.org/r/20230414024302.2411985-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The Qualcomm SCM driver will now always clear the download bit, avoiding
entering download mode on a clean reboot because the bootloader left it
set. The vmid bitmap passed to qcom_scm_assign_mem() is transitioned to
a well defined size. SM6375 support is added, and SC8180X,
QDU1000/QRU1000, IPQ5332 and IPQ9574 compatibles are documented.
GENI gains support for newer hardware with deeper FIFOs.
The BWMON driver is updated to better handle the two register blocks,
which are not consistent between MSM8998 and newer platforms.
The LLCC driver no longer assumes a fixes stride across the various
banks, and instead acquire the bank placement from DeviceTree. EDAC
support for polling is introduced. EDAC support on SDM845 is disabled,
as its been observed that accessing relevant registers is not permitted
on most devices.
PMIC GLINK is reworked to support defining which auxiliary children to
spawn per platform, support for spawning a UCSI child is added and
SM8450 and SM8550 is introduced.
The RPM power-domain driver is cleaned up by moving and generalizing
structures that are common between platforms, rather than duplicating
everything. Macros are replaced with just direct definition of the
relevant structures. Support for defining parent relationships between
the power-domains is introduced, like it has been in rpmhpd for a long
time.
Number of processors has gone up, so max processor count in SMEM
is bumped again. Error handling in SMSM is cleaned up using
dev_err_probe().
Socinfo is taught about IPQ9574, QCM2290, QRB2210, QRB4210, SM7150,
SA8775P and a number of PMICs.
-----BEGIN PGP SIGNATURE-----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=Bo2w
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=wYqZ
-----END PGP SIGNATURE-----
Merge tag 'qcom-drivers-for-6.4' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/drivers
Qualcomm driver updates for v6.4
The Qualcomm SCM driver will now always clear the download bit, avoiding
entering download mode on a clean reboot because the bootloader left it
set. The vmid bitmap passed to qcom_scm_assign_mem() is transitioned to
a well defined size. SM6375 support is added, and SC8180X,
QDU1000/QRU1000, IPQ5332 and IPQ9574 compatibles are documented.
GENI gains support for newer hardware with deeper FIFOs.
The BWMON driver is updated to better handle the two register blocks,
which are not consistent between MSM8998 and newer platforms.
The LLCC driver no longer assumes a fixes stride across the various
banks, and instead acquire the bank placement from DeviceTree. EDAC
support for polling is introduced. EDAC support on SDM845 is disabled,
as its been observed that accessing relevant registers is not permitted
on most devices.
PMIC GLINK is reworked to support defining which auxiliary children to
spawn per platform, support for spawning a UCSI child is added and
SM8450 and SM8550 is introduced.
The RPM power-domain driver is cleaned up by moving and generalizing
structures that are common between platforms, rather than duplicating
everything. Macros are replaced with just direct definition of the
relevant structures. Support for defining parent relationships between
the power-domains is introduced, like it has been in rpmhpd for a long
time.
Number of processors has gone up, so max processor count in SMEM
is bumped again. Error handling in SMSM is cleaned up using
dev_err_probe().
Socinfo is taught about IPQ9574, QCM2290, QRB2210, QRB4210, SM7150,
SA8775P and a number of PMICs.
* tag 'qcom-drivers-for-6.4' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (51 commits)
dt-bindings: firmware: document Qualcomm SC8180X SCM
dt-bindings: sram: qcom,imem: document SM6375 IMEM
soc: qcom: icc-bwmon: Handle global registers correctly
soc: qcom: icc-bwmon: Remove unused struct member
soc: qcom: smsm: Use dev_err_probe()
firmware: qcom_scm: Add SM6375 compatible
soc: qcom: llcc: Add configuration data for SM7150
dt-bindings: arm: msm: Add LLCC for SM7150
dt-bindings: soc: qcom: smd-rpm: re-add missing qcom,rpm-msm8994
soc: qcom: pmic_glink: register ucsi aux device
dt-bindings: soc: qcom: qcom,pmic-glink: document SM8550 compatible
dt-bindings: soc: qcom: qcom,pmic-glink: document SM8450 compatible
firmware: qcom_scm: Clear download bit during reboot
dt-bindings: soc: qcom: aoss: Document QDU1000/QRU1000 compatible
dt-bindings: firmware: qcom,scm: Update QDU1000/QRU1000 compatible
dt-bindings: soc: qcom: smd-rpm: Add IPQ9574 compatible
firmware: qcom_scm: Use fixed width src vm bitmap
dt-bindings: firmware: qcom,scm: document IPQ5332 SCM
dt-bindings: scm: Add compatible for IPQ9574
soc: qcom: rpmpd: Remove useless comments
...
Link: https://lore.kernel.org/r/20230410152421.4477-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Change the original fixed delay to the assignment from property. It will make
more flexible to different platforms for avoiding pop noise at the beginning
of recording.
Signed-off-by: David Lin <CTLIN0@nuvoton.com>
Link: https://lore.kernel.org/r/20230414103941.39566-1-CTLIN0@nuvoton.com
Signed-off-by: Mark Brown <broonie@kernel.org>
- Fix interaction between fw_devlink and DT overlays causing
devices to not be probed
- Fix the compatible string for loongson,cpu-interrupt-controller
-----BEGIN PGP SIGNATURE-----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=x2A8
-----END PGP SIGNATURE-----
Merge tag 'devicetree-fixes-for-6.2-3' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree fixes from Rob Herring:
- Fix interaction between fw_devlink and DT overlays causing devices to
not be probed
- Fix the compatible string for loongson,cpu-interrupt-controller
* tag 'devicetree-fixes-for-6.2-3' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
treewide: Fix probing of devices in DT overlays
dt-bindings: interrupt-controller: loongarch: Fix mismatched compatible
The Cadence I2C controller has an external reset that needs to be
de-asserted before the I2C controller can be accessed.
Document the `resets` devicetree property that can be used to describe how
the reset signal is connected.
While the reset signal will always be present in hardware the devicetree
property is kept optional for backwards compatibility with existing systems
that do not specify the reset property and where the reset signal might not
be controlled by operating system.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Michal Simek <michal.simek@amd.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Add compatible string for the I2C controllers found in the MediaTek
MT7981 SoC.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
The sc8280xp has a new version of the ETHQOS hardware in it, EMAC v3.
Add a compatible for this.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Andrew Halaney <ahalaney@redhat.com>
Tested-by: Brian Masney <bmasney@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Convert Qualcomm ETHQOS Ethernet devicetree binding to YAML.
In doing so add a new property for iommus since newer platforms support
using one, and without such make dtbs_check fails on them.
While at it, also update the MAINTAINERS file to point to the yaml
version of the bindings.
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
[halaney: Remove duplicated properties, add MAINTAINERS and iommus]
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Andrew Halaney <ahalaney@redhat.com>
Tested-by: Brian Masney <bmasney@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
As commit fc191af1bb ("net: stmmac: platform: Fix misleading
interrupt error msg") noted, not every stmmac based platform
makes use of the 'eth_wake_irq' or 'eth_lpi' interrupts.
So, update the 'interrupt-names' inside 'snps,dwmac' YAML
bindings to reflect the same.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
Signed-off-by: Andrew Halaney <ahalaney@redhat.com>
Tested-by: Brian Masney <bmasney@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The Qcom PCIe controller is capable of using either internal MSI controller
or the external GIC-ITS for signaling MSIs sent by endpoint devices.
Currently, the binding only documents the internal MSI implementation.
Let's document the GIC-ITS imeplementation by making use of msi-map and
msi-map-mask properties. Only one of the implementation should be used
at a time and the drivers can choose the preferred one.
Link: https://lore.kernel.org/r/20230411121442.22227-1-manivannan.sadhasivam@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Add the SM8550 platform to the binding.
Link: https://lore.kernel.org/r/20230320144658.1794991-1-abel.vesa@linaro.org
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Add device tree bindings for Cirrus Logic EP93xx internal SoCs' I2S
controller.
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230411165951.2335899-1-alexander.sverdlin@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Document that the da9063 only provides under- *and* over-voltage
monitoring in one, and therefore requires both to be configured with the
same severity and value. Add an example for clarification.
Signed-off-by: Benjamin Bara <benjamin.bara@skidata.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Adam Ward <DLG-Adam.Ward.opensource@dm.renesas.com>
Link: https://lore.kernel.org/r/20230403-da9063-disable-unused-v3-3-cc4dc698864c@skidata.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Unit address of PCIe EP node should be 0x1c00000 as it has to match the
first address specified in the reg property.
Link: https://lore.kernel.org/r/20230308082424.140224-5-manivannan.sadhasivam@linaro.org
Fixes: 31c9ef0025 ("dt-bindings: PCI: Add Qualcomm PCIe Endpoint controller")
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Add support for the PCIe controller on the Qcom SDX55 SoC to the binding.
Link: https://lore.kernel.org/r/20230308082424.140224-4-manivannan.sadhasivam@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
New device support
* bosch,bmp280
- Add support for BMP580 - includes significant refactoring and general
driver cleanup + support for non-volatile memory for trimming and config
parameters.
* rohm BU27034
- New driver for this 3 channel ambient light sensor.
- New support library for devices where both integration time and
amplifier gain are configurable. In these cases a scale change
may require changing bother underlying values. This library module
provides code to help with this.
* st,accel
- Add support for IIS328DQ (ID only as compatible wtih LIS331DL)
* st,lsm6dsx
- Add support for ASM330LHB automotive MEMS sensor.
* ti,ads1100, ads1000
- New driver for these 16 bit ADCs.
* ti,tmp117
- Add support for older tmp116 device. Includes some general driver cleanup.
Staging driver drops
* adi,ade7854
- Driver was a very long way from compliant with IIO infrastructure and ABI.
If anyone wants a non staging version of this driver they are better off
starting from scratch. Hence drop it and the associated meter.h header.
Features
* adi,ad7441r
- Add DT binding to set sink current for digital input.
* semtech,sx9324,9360
- Support older register mapping from firmware designed for windows.
Core improvements.
* Move iio_trigger_poll() docs to next to the implementation and add a note
on expected caller context.
* Rename iio_trigger_poll_chained() to iio_trigger_poll_nested() so
as to use more standard / common terminology.
* Improve main ABI docs references to offset and scale for raw values by
making them consistent and clear.
Cleanups and minor fixes:
* adi,ad5592r
- Add GPIO names - useful for debug.
* adi,ad7441r
- Fix current input, loop powered mode configuration setup.
* adi,adis16475
- Fix wrong commented value for minimum advised lower rate.
* adi,admv1013
- Use devm_clk_get_enabled() to reduce boilerplate.
* adi,ads1210
- Fix wrong bits for writing config register (late fix and has
been broken a long time so not rushed upstream)
* amlogic,meson-saradc
- Improve cleanup in error handling if BL30 handshake fails.
* apex-embedded,stx104
- Migrate to regmap and use regmap_read_poll_timeout() to neatly handle
retries.
- Add local mutex to close various races.
- Use define U16_MAX rather than value for limit.
- Improve code readability with minor reorganization.
* atmel,ad91-sama5d2
- Drop trivial dead code.
* kionix,kx022a
- Drop unused structure element.
* linear,ltc2983
- Reorganize bindings doc to enable unevaluatedProperties to be set
in one place for all child nodes.
- Make binding for adi,custom-thermocouple accept signed values.
* maxim,max44000
- Add OF Device matching (of_match_table was not correctly set).
* maxim,max5522
- Missing static
* measurement-computing,cio-dac
- Fix wrong part name in comments.
- Migrate to regmap.
- Improve includes by replacing bitops.h with more direct bits.h
* qcom,pm8xxx-xoadc
- Remove a check that can never fail.
* renesas,rcar-gyroadc
- DT binding documentation improvements.
- Tidy up an unused warning with __maybe_unused.
* semtech,sx_common
- Drop docs for a structure element that doesn't exist.
* semtech,sx9500
- Drop ACPI_PTR() and of_match_ptr() protections that just complicate
the code / block some firmware registration types that would otherwise
work.
* sensiron,sps30
- Comment formatting tidy up.
* st,sensors
- Drop duplicate text in DT binding.
* st,stm32-adc
- Add some missing static markings.
* ti,ads1100
- Use correct return code in dev_err_probe() call.
* x-powers,axp20x_adc - precursor series to simplify addition of AXP192.
- General code cleanup / minor refactoring for better readabilty of code.
- Switch from boolean value to mask for adc_en2 field to avoid hard coding
a mask that will be different in AXP192
-----BEGIN PGP SIGNATURE-----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=xxs6
-----END PGP SIGNATURE-----
Merge tag 'iio-for-6.4a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next
Jonathan writes:
1st set of IIO new device support, features and cleanups for the 6.4 cycle.
New device support
* bosch,bmp280
- Add support for BMP580 - includes significant refactoring and general
driver cleanup + support for non-volatile memory for trimming and config
parameters.
* rohm BU27034
- New driver for this 3 channel ambient light sensor.
- New support library for devices where both integration time and
amplifier gain are configurable. In these cases a scale change
may require changing bother underlying values. This library module
provides code to help with this.
* st,accel
- Add support for IIS328DQ (ID only as compatible wtih LIS331DL)
* st,lsm6dsx
- Add support for ASM330LHB automotive MEMS sensor.
* ti,ads1100, ads1000
- New driver for these 16 bit ADCs.
* ti,tmp117
- Add support for older tmp116 device. Includes some general driver cleanup.
Staging driver drops
* adi,ade7854
- Driver was a very long way from compliant with IIO infrastructure and ABI.
If anyone wants a non staging version of this driver they are better off
starting from scratch. Hence drop it and the associated meter.h header.
Features
* adi,ad7441r
- Add DT binding to set sink current for digital input.
* semtech,sx9324,9360
- Support older register mapping from firmware designed for windows.
Core improvements.
* Move iio_trigger_poll() docs to next to the implementation and add a note
on expected caller context.
* Rename iio_trigger_poll_chained() to iio_trigger_poll_nested() so
as to use more standard / common terminology.
* Improve main ABI docs references to offset and scale for raw values by
making them consistent and clear.
Cleanups and minor fixes:
* adi,ad5592r
- Add GPIO names - useful for debug.
* adi,ad7441r
- Fix current input, loop powered mode configuration setup.
* adi,adis16475
- Fix wrong commented value for minimum advised lower rate.
* adi,admv1013
- Use devm_clk_get_enabled() to reduce boilerplate.
* adi,ads1210
- Fix wrong bits for writing config register (late fix and has
been broken a long time so not rushed upstream)
* amlogic,meson-saradc
- Improve cleanup in error handling if BL30 handshake fails.
* apex-embedded,stx104
- Migrate to regmap and use regmap_read_poll_timeout() to neatly handle
retries.
- Add local mutex to close various races.
- Use define U16_MAX rather than value for limit.
- Improve code readability with minor reorganization.
* atmel,ad91-sama5d2
- Drop trivial dead code.
* kionix,kx022a
- Drop unused structure element.
* linear,ltc2983
- Reorganize bindings doc to enable unevaluatedProperties to be set
in one place for all child nodes.
- Make binding for adi,custom-thermocouple accept signed values.
* maxim,max44000
- Add OF Device matching (of_match_table was not correctly set).
* maxim,max5522
- Missing static
* measurement-computing,cio-dac
- Fix wrong part name in comments.
- Migrate to regmap.
- Improve includes by replacing bitops.h with more direct bits.h
* qcom,pm8xxx-xoadc
- Remove a check that can never fail.
* renesas,rcar-gyroadc
- DT binding documentation improvements.
- Tidy up an unused warning with __maybe_unused.
* semtech,sx_common
- Drop docs for a structure element that doesn't exist.
* semtech,sx9500
- Drop ACPI_PTR() and of_match_ptr() protections that just complicate
the code / block some firmware registration types that would otherwise
work.
* sensiron,sps30
- Comment formatting tidy up.
* st,sensors
- Drop duplicate text in DT binding.
* st,stm32-adc
- Add some missing static markings.
* ti,ads1100
- Use correct return code in dev_err_probe() call.
* x-powers,axp20x_adc - precursor series to simplify addition of AXP192.
- General code cleanup / minor refactoring for better readabilty of code.
- Switch from boolean value to mask for adc_en2 field to avoid hard coding
a mask that will be different in AXP192
* tag 'iio-for-6.4a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (63 commits)
MAINTAINERS: Add ROHM BU27034
iio: light: ROHM BU27034 Ambient Light Sensor
dt-bindings: iio: light: Support ROHM BU27034
MAINTAINERS: Add IIO gain-time-scale helpers
iio: light: Add gain-time-scale helpers
doc: Make sysfs-bus-iio doc more exact
iio: dac: set variable max5522_channels storage-class-specifier to static
dt-bindings: iio: temperature: ltc2983: Make 'adi,custom-thermocouple' signed
dt-bindings: iio: temperature: ltc2983: Fix child node unevaluated properties
iio: addac: stx104: Use regmap_read_poll_timeout() for conversion poll
iio: addac: stx104: Migrate to the regmap API
iio: addac: stx104: Improve indentation in stx104_write_raw()
iio: addac: stx104: Use define rather than hardcoded limit for write val
iio: addac: stx104: Fix race condition when converting analog-to-digital
iio: addac: stx104: Fix race condition for stx104_write_raw()
dt-bindings: iio: st-sensors: Fix repeated text
staging: iio: resolver: ads1210: fix config mode
iio: adc: ti-ads1100: fix error code in probe()
iio: accel: add support for IIS328DQ variant
dt-bindings: iio: st-sensors: Add IIS328DQ accelerometer
...
The GPIO IR receiver can be used as a wake-up source for the system,
document that.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Stan is no longer working with MMSOL and expressed his interest to not
continue maintaining Qcom PCIe driver. Since I took over the driver
maintainership, I'm stepping in to maintain the binding also.
Link: https://lore.kernel.org/r/20230308082424.140224-2-manivannan.sadhasivam@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Add DT compatible for Data Modul i.MX8M Plus eDM SBC board.
This is an evaluation board for various custom display units.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
This adds the compatibles for the chargebyte Tarragon boards.
Signed-off-by: Stefan Wahren <stefan.wahren@chargebyte.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
chargebyte supplies hardware and software products for all
aspects of charging communication.
https://chargebyte.com/
Signed-off-by: Stefan Wahren <stefan.wahren@chargebyte.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The "compatible" doesn't match what the kernel is using. Fix it as
kernel using.
Fixes: 6b2748ada2 ("dt-bindings: interrupt-controller: add yaml for LoongArch CPU interrupt controller")
Reported-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/all/20221208020954.GA3368836-robh@kernel.org/
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Liu Peibao <liupeibao@loongson.cn>
Link: https://lore.kernel.org/r/20230401091304.12633-1-liupeibao@loongson.cn
[robh: Rename file to match compatible, fix subject typo]
Signed-off-by: Rob Herring <robh@kernel.org>
Dongchun's e-mail mailbox is no longer available, assign the
maintainership to myself.
The following message to <dongchun.zhu@mediatek.com> was
undeliverable. The reason for the problem: 5.1.0 - Unknown address
error 550-'Relaying mail to dongchun.zhu@mediatek.com is not
allowed'
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Convert the text-based dt-bindings to yaml.
Changes from original txt:
* Take wording for various properties from other yaml bindings, this
removes e.g. volt amount from schema since it isn't really relevant
and the datasheet is a better source.
* Don't make reset-gpios a required property since it can be tied to
DOVDD instead.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
[Sakari Ailus: bump the maxItems for data-lanes to two]
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
With the upcoming conversion of ov2685 to dt-schema let's complete the
example so validation succeeds. At the same time fix the indentation of
the port node in this example.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Cleanup bindings dropping unneeded quotes. Once all these are fixed,
checking for this can be enabled in yamllint.
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Joe Tessler <jrt@google.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de> #rockchip
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
[Sakari Ailus: Drop changes for files in which they had been done already]
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Merge series from Cristian Ciocaltea <cristian.ciocaltea@collabora.com>:
This patch series introduces support for the Rockchip RK860X regulators,
while also providing a few fixes and improvements to the existing fan53555
driver.
RK8600/RK8601 are quite similar to the FAN53555 regulators.
RK8602/RK8603 are a bit different, having a wider output voltage
selection range, from 0.5 V to 1.5 V in 6.25 mV steps. They are used
in the Rock 5B board to power the ARM Cortex-A76 cores and the NPU.
Convert the WM8711 audio CODEC bindings to DT schema
Signed-off-by: Saalim Quadri <danascape@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230405205820.6836-1-danascape@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Convert the WM8580 and WM8581 audio CODEC bindings to DT schema
Signed-off-by: Saalim Quadri <danascape@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230405205025.6448-1-danascape@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
On certain SoCs, Interrupt Aggregator may have a power-domain dependency
to be on before accessing. Add DT binding for the same
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230407045111.531107-1-vigneshr@ti.com
Signed-off-by: Rob Herring <robh@kernel.org>
Document the Qualcomm qrb4210-rb2 board based on Robotics version
of the Snapdragon SM4250 Soc, i.e. QRB4210.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230411072840.2751813-2-bhupesh.sharma@linaro.org
Add compatibles to support Rockchip RK860X regulators.
RK8600/RK8601 are pretty similar to the FAN53555 regulators, while
RK8602/RK8603 are a bit different, having a wider voltage selection
range.
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230406194158.963352-2-cristian.ciocaltea@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
1. Add support for 10-bit overlays
2. Add MediaTek SoC DRM (vdosys1) support for mt8195
3. Change mmsys compatible for mt8195 mediatek-drm
4. Only trigger DRM HPD events if bridge is attached
5. Change the aux retries times when receiving AUX_DEFER
-----BEGIN PGP SIGNATURE-----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=T2t7
-----END PGP SIGNATURE-----
Merge tag 'mediatek-drm-next-6.4' of https://git.kernel.org/pub/scm/linux/kernel/git/chunkuang.hu/linux into drm-next
Mediatek DRM Next for Linux 6.4
1. Add support for 10-bit overlays
2. Add MediaTek SoC DRM (vdosys1) support for mt8195
3. Change mmsys compatible for mt8195 mediatek-drm
4. Only trigger DRM HPD events if bridge is attached
5. Change the aux retries times when receiving AUX_DEFER
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230410233005.2572-1-chunkuang.hu@kernel.org
main pull request for v6.4
Core Display:
============
* Bugfixes for error handling during probe
* rework UBWC decoder programming
* prepare_commit cleanup
* bindings for SM8550 (MDSS, DPU), SM8450 (DP)
* timeout calculation fixup
* atomic: use drm_crtc_next_vblank_start() instead of our own
custom thing to calculate the start of next vblank
DP:
==
* interrupts cleanup
DPU:
===
* DSPP sub-block flush on sc7280
* support AR30 in addition to XR30 format
* Allow using REC_0 and REC_1 to handle wide (4k) RGB planes
* Split the HW catalog into individual per-SoC files
DSI:
===
* rework DSI instance ID detection on obscure platforms
GPU:
===
* uapi C++ compatibility fix
* a6xx: More robust gdsc reset
* a3xx and a4xx devfreq support
* update generated headers
* various cleanups and fixes
* GPU and GEM updates to avoid allocations which could trigger
reclaim (shrinker) in fence signaling path
* dma-fence deadline hint support and wait-boost
* a640 speedbin support
* a650 speedbin support
Conflicts in drivers/gpu/drm/msm/adreno/adreno_gpu.c:
Conflict between the 7fa5047a43 ("drm: Use of_property_present() for
testing DT property presence") and 9f251f9340 ("drm/msm/adreno: Use
OPP for every GPU generation"). The latter removed the of_ function
call outright, so I went with what's in the PR unchanged.
From: Rob Clark <robdclark@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGvwuj5tabyW910+N-B=5kFNAC7QNYoQ=0xi3roBjQvFFQ@mail.gmail.com
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
"mhi" register region contains the MHI registers that could be used by
the PCIe controller drivers to get debug information like PCIe link
transition counts on newer SoCs.
Link: https://lore.kernel.org/r/20230316081117.14288-16-manivannan.sadhasivam@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Need to add racing control register base in device node for mt8195 support
inner racing mode. Changing the max reg value from 1 to 2.
Adding the description for VDEC_SYS and VDEC_MISC.
Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com>
Signed-off-by: Allen-KH Cheng <allen-kh.cheng@mediatek.com>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Tested-by: Chen-Yu Tsai <wenst@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
mt8195 and mt8192 have different clock numbers, separate 'clock-names'
according to compatible name.
Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com>
Signed-off-by: Allen-KH Cheng <allen-kh.cheng@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Tested-by: Chen-Yu Tsai <wenst@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Because the decoder nodes already make use of the iommus property to
configure the IOMMU for address translations, having a dma-ranges
property makes no sense.
In fact, after commit f1ad5338a4 ("of: Fix "dma-ranges" handling for
bus controllers"), having a dma-ranges property causes IOMMU faults.
Remove the dma-ranges property and update the example.
Signed-off-by: Allen-KH Cheng <allen-kh.cheng@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Tested-by: Chen-Yu Tsai <wenst@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
In order to make the names of the child nodes more generic, we rename
"vcodec-lat" and "vcodec-core" to "video-codec" for decoder in
patternProperties and example.
Signed-off-by: Allen-KH Cheng <allen-kh.cheng@mediatek.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Tested-by: Chen-Yu Tsai <wenst@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
ROHM BU27034 is an ambient light sesnor with 3 channels and 3 photo diodes
capable of detecting a very wide range of illuminance. Typical application
is adjusting LCD and backlight power of TVs and mobile phones.
Add dt-bindings.
Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/66a222574176ee2adbfccf6d9a591c04571a18d9.1680263956.git.mazziesaccount@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The 'adi,custom-thermocouple' property is signed based on the example
and driver, so it's type should be int64-matrix rather than
uint64-matrix.
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230404205014.644336-2-robh@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The child node schemas are missing 'unevaluatedProperties' constraints,
so any unknown properties are allowed. The current structure with
multiple patternProperties schemas doesn't work for
unevaluatedProperties as each sub-schema is evaluated independently. To
fix this, move the sub-schema for all child nodes to a $defs entry and
reference it from each named child node.
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230404205014.644336-1-robh@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The description oddly contains a copy of the initial paragraph.
Let's not repeat ourselves.
Suggested-by: Diederik de Haas <didi.debian@cknow.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230329074614.1037625-1-linus.walleij@linaro.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
We need the USB fixes in here for testing, and this resolves two merge
conflicts, one pointed out by linux-next:
drivers/usb/dwc3/dwc3-pci.c
drivers/usb/host/xhci-pci.c
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Here are some small tty and serial driver fixes for some reported
problems:
- fsl_uart driver bugfixes
- sh-sci serial driver bugfixes
- renesas serial driver DT binding bugfixes
- 8250 DMA bugfix
All of these have been in linux-next for a while with no reported
problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iGwEABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZDFTtg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynImACXZSsiSzuMqAoEisjLfcb7bPovvQCfd5FntU3K
h6JE0Y44gi6WS9iWYHU=
=jDa+
-----END PGP SIGNATURE-----
Merge tag 'tty-6.3-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial driver fixes from Greg KH:
"Here are some small tty and serial driver fixes for some reported
problems:
- fsl_uart driver bugfixes
- sh-sci serial driver bugfixes
- renesas serial driver DT binding bugfixes
- 8250 DMA bugfix
All of these have been in linux-next for a while with no reported
problems"
* tag 'tty-6.3-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
tty: serial: sh-sci: Fix Rx on RZ/G2L SCI
tty: serial: fsl_lpuart: fix crash in lpuart_uport_is_active
tty: serial: fsl_lpuart: avoid checking for transfer complete when UARTCTRL_SBK is asserted in lpuart32_tx_empty
serial: 8250: Prevent starting up DMA Rx on THRI interrupt
dt-bindings: serial: renesas,scif: Fix 4th IRQ for 4-IRQ SCIFs
tty: serial: sh-sci: Fix transmit end interrupt handler
Document the MI01.6 (Reference Design Platform 468) board based on IPQ5332
family of SoCs.
Signed-off-by: Kathiravan T <quic_kathirav@quicinc.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230323093120.20558-2-quic_kathirav@quicinc.com
Add schema file for new Qualcomm Inline Crypto Engine driver.
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230407105029.2274111-2-abel.vesa@linaro.org
Document the Xiaomi Mi A3 (xiaomi-laurel-sprout) smartphone which is
based on the Snapdragon 665 SoC.
Signed-off-by: Lux Aliaga <they@mint.lgbt>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230306170817.3806-6-they@mint.lgbt
Add a compatible for Qualcomm QCM2290 SCM and add it to the core clock
users list.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230403-topic-rb1_qcm-v2-1-dae06f8830dc@linaro.org
Merge the support for output-enable/disable in the pinctrl-msm driver,
to ensure that bisection across the following SC7180/SC7280 DeviceTree
changes result in something electrically sound.
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Cleanup bindings dropping unneeded quotes. Once all these are fixed,
checking for this can be enabled in yamllint.
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20230327170233.4109156-1-robh@kernel.org
Add a new compatible for the thermal sensor device on RK3588 SoCs.
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20230308112253.15659-8-sebastian.reichel@collabora.com
Restruct i.MX PCIe schema, derive the common properties, thus they can
be shared by both the RC and Endpoint schema.
Update the description of fsl,imx6q-pcie.yaml, and move the EP mode
compatible to fsl,imx6q-pcie-ep.yaml.
Add support for i.MX8M PCIe Endpoint modes, and update the MAINTAINER
accordingly.
Link: https://lore.kernel.org/r/1676441915-1394-2-git-send-email-hongxing.zhu@nxp.com
Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Add the compatible for the pmm8654au RPMH regulators present on the
sa8775p-ride development board.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/r/20230406192811.460888-2-brgl@bgdev.pl
Signed-off-by: Mark Brown <broonie@kernel.org>
Core:
- Bugfixes for error handling during probe
- rework UBWC decoder programming
- prepare_commit cleanup
- bindings for SM8550 (MDSS, DPU), SM8450 (DP)
- uapi C++ compatibility fix
- timeout calculation fixup
- msm_fbdev conversion to drm_client
DP:
- interrupts cleanup
DPU:
- DSPP sub-block flush on sc7280
- support AR30 in addition to XR30 format
- Allow using REC_0 and REC_1 to handle wide (4k) RGB planes
DSI:
- rework DSI instance ID detection on obscure platforms
and misc small fixes as usual.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Merge DPU changes, resolving conflicts between branches. Full changelog
will be present in the final merge commit.
DPU:
- DSPP sub-block flush on sc7280
- support AR30 in addition to XR30 format
- Allow using REC_0 and REC_1 to handle wide (4k) RGB planes
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
The point of the previous cleanup was to disallow "qcom,mdss-dsi-ctrl"
alone. This however didn't quite work out and the property became
undocumented instead of deprecated. Fix that.
Additionally, the "qcom," prefix was missed previously. Fix it.
Fixes: 0c0f65c6dd ("dt-bindings: msm: dsi-controller-main: Add compatible strings for every current SoC")
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/527651/
Link: https://lore.kernel.org/r/20230307-topic-dsi_qcm-v6-1-70e13b1214fa@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Samsung MIPI DSIM bridge can be found on Exynos and NXP's
i.MX8M Mini/Nano/Plus SoCs.
Convert exynos_dsim.txt to yaml.
Used the example node from exynos5433.dtsi instead of the one used in
the legacy exynos_dsim.txt.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Fabio Estevam <festevam@denx.de>
Reviewed-by: Marek Vasut <marex@denx.de>
Link: https://lore.kernel.org/r/20230404023057.510329-1-festevam@gmail.com
Signed-off-by: Rob Herring <robh@kernel.org>
There's no need for "#address-cells/#size-cells" in the brcm,sf2 node as
no immediate child nodes have an address. What was probably intended was
to put them in the 'ports' node, but that's not necessary as that is
covered by ethernet-switch.yaml via dsa.yaml.
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20230404204152.635400-1-robh@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The schema doesn't allow for a single (unaddressed) ethernet port node
nor does a single port switch make much sense. So if there's always
multiple child nodes, "#address-cells" and "#size-cells" should be
required.
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20230404204213.635773-1-robh@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEDs2BvajyNKlf9TJQvlAcSiqKBOgFAmQsOSQTHG1rbEBwZW5n
dXRyb25peC5kZQAKCRC+UBxKKooE6N+QB/4w/slgDq0yAYs0GTsRA3Z3IGp8OAlp
PI6g1y9npiR7ffFdnC7ldYRSzTg2sStEKhe0xv80zOPl8IpI82Bz5a7oSb2Oi9tH
Fuf2JF2KYt08VfhGQKmhhcWHSh/vyCrAt14s8P2sCGQPEFBm2N8qrB9hhZera3Xb
gwNG+1nFjuFlUdRxMVQXLmyBdccl/+OLdtU/tI3Y4xm57Fxnghq7DyvmdGumJsbN
6zlyi+FTF3PGgOWglS/2rZeOO4PPWgfsZEeM6jhAt1E2ijtMJSQUl3w1Fpo6dcnq
49wSMFySI8jwpewLgZctZNheb73wvuvAqXnmPm8Krd0hi/apL79Tb1OE
=lDzw
-----END PGP SIGNATURE-----
Merge tag 'linux-can-next-for-6.4-20230404-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next
Marc Kleine-Budde says:
====================
pull-request: can-next 2023-04-04-2
The first patch is by Oliver Hartkopp and makes the maximum pdu size
of the CAN ISOTP protocol configurable.
The following 5 patches are by Dario Binacchi and add support for the
bxCAN controller by ST.
Geert Uytterhoeven's patch for the rcar_canfd driver fixes a sparse
warning.
Peng Fan's patch adds an optional power-domains property to the
flexcan device tree binding.
Frank Jungclaus adds support for CAN_CTRLMODE_BERR_REPORTING to the
esd_usb driver.
The last patch is by Oliver Hartkopp and converts the USB IDs of the
kvaser_usb driver to hexadecimal values.
* tag 'linux-can-next-for-6.4-20230404-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next:
kvaser_usb: convert USB IDs to hexadecimal values
can: esd_usb: Add support for CAN_CTRLMODE_BERR_REPORTING
dt-bindings: can: fsl,flexcan: add optional power-domains property
can: rcar_canfd: rcar_canfd_probe(): fix plain integer in transceivers[] init
can: bxcan: add support for ST bxCAN controller
ARM: dts: stm32: add pin map for CAN controller on stm32f4
ARM: dts: stm32: add CAN support on stm32f429
dt-bindings: net: can: add STM32 bxcan DT bindings
dt-bindings: arm: stm32: add compatible for syscon gcan node
can: isotp: add module parameter for maximum pdu size
====================
Link: https://lore.kernel.org/r/20230404145908.1714400-1-mkl@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Just as unevaluatedProperties or additionalProperties are required at
the top level of schemas, they should (and will) also be required for
child node schemas. That ensures only documented properties are
present.
Add unevaluatedProperties or additionalProperties as appropriate, and
then add any missing properties flagged by the addition.
Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Lee Jones <lee@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230124230228.372305-1-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
U-Boot's "ethaddr" environment variable is very often used to store
*base* MAC address. It's used as a base for calculating addresses for
multiple interfaces. It's done by adding proper values. Actual offsets
are picked by manufacturers and vary across devices.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20230404172148.82422-34-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cleanup bindings dropping unneeded quotes. Once all these are fixed,
checking for this can be enabled in yamllint.
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20230404172148.82422-26-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There is a spelling mistake in platforn-name. Fix it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20230404172148.82422-7-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Convert the Amlogic Meson GX eFuse bindings to dt-schema.
Take in account the used variant with amlogic,meson-gx-efuse.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20230404172148.82422-6-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The SPMI PMIC register region width is fixed and should not be encoded
in the devicetree.
Amend the example with a parent pmic node with the expected
'#address-cells' and '#size-cells' and fix up the 'reg' property.
Fixes: 9664a6b54c ("dt-bindings: nvmem: add binding for QTI SPMI SDAM")
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20230404172148.82422-3-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The meta schema from DT schema already defines assigned-clocks, so there
is no need for device schema to mention it at all. There are also no
benefits of having it here.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230403191850.374839-3-krzysztof.kozlowski@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The meta schema from DT schema already defines assigned-clocks, so there
is no need for device schema to mention it at all. There are also no
benefits of having it here.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230403191850.374839-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The meta schema from DT schema already defines assigned-clocks, so there
is no need for device schema to mention it at all. There are also no
benefits of having it here.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230403191850.374839-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The driver can poll for interrupt status so interrupts
can be optional. It is still recommended to use the
interrupt line. Polling should only be used for debug
and prototyping.
Signed-off-by: Roger Quadros <rogerq@kernel.org>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230324133741.43408-1-rogerq@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Convert the binding to DT schema format, and rename it to
nxp,ptn5110.yaml
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230330091736.1873121-1-peng.fan@oss.nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add a new compatible string in cpu.yaml for SiFive S7 CPU
core which is used on SiFive U74-MC core complex etc.
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Signed-off-by: Hal Feng <hal.feng@starfivetech.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Add bindings for the always-on clock and reset generator (AONCRG) on the
JH7110 RISC-V SoC by StarFive Ltd.
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
Signed-off-by: Hal Feng <hal.feng@starfivetech.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Add bindings for the system clock and reset generator (SYSCRG) on the
JH7110 RISC-V SoC by StarFive Ltd.
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
Signed-off-by: Hal Feng <hal.feng@starfivetech.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Convert the AK4458 audio DAC bindings to DT schema.
Signed-off-by: Saalim Quadri <danascape@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230328091831.55690-1-danascape@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
SCMI defines two kinds of communication channels between the agent and the
platform: one bidirectional 'a2p' channel used by the agent to send SCMI
commands and synchronously receive the related replies, and an optional
'p2a' unidirectional channel used to asynchronously receive delayed
responses and notifications emitted from the platform.
When configuring an SCMI transport based on mailboxes, the current binding
supports only mailboxes providing bidirectional channels: in such a case
one mailbox channel can be easily assigned to each SCMI channel as above
described.
In case, instead, to have to deal with mailboxes providing only distinct
unidirectional channels, it becomes necessary to extend the binding in
order to be able to bind 2 distinct unidirectional mailbox channels to the
same SCMI 'a2p' channel.
Bidirectional and unidirectional channels support for the SCMI mailbox
transport can coexist by carefully considering the effective combination
of defined 'mboxes' and 'shmem' descriptors.
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230404115026.2828149-2-cristian.marussi@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
BWMONv4 has two sets of registers: one for handling the monitor itself
and one called "global" which hosts some sort of a headswitch and an
interrupt control register. We did not handle that one before, as on
SoCs starting with SDM845 they have been merged into a single contiguous
range.
To make the qcom,msm8998-bwmon less confusing and in preparation for
actual MSM8998 support, describe the global register space and introduce
new "qcom,sdm845-cpu-bwmon" compatible while keeping the
"qcom,sdm845-bwmon" as a fallback for SoCs with this merged register space
scheme.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230304-topic-ddr_bwmon-v3-1-77a050c2fbda@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
SM6375 includes a CPUCP block responsible for managing different APSS-
related tasks, such as scaling the voltage and frequency of the
components within the ARM DSU cluster. Add a compatible for the L3 cache
DVFS scaler within.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230303-topic-sm6375_features0_dts-v2-2-708b8191f7eb@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Just like on Exynos5250, Exynos5420 and Exynos5433 the MIPI phy is
actually part of the Power Management Unit system controller thus allow
it as PMU's child.
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230207192851.549242-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Henan Yiming Technology Co., Ltd. was established in 2021. The business
scope of the company includes: communication equipment (excluding radio
control equipment).
Link: https://gw.yimingkeji.net
Signed-off-by: Yang Xiwen <forbidden405@foxmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/tencent_27DD0718C3FD9C5F7D6E2FBA225CAA760405@qq.com
There's a bunch of bindings for (mostly l2) cache controllers
scattered to the four winds, move them to a common directory.
I renamed the freescale l2cache.txt file, as while that might make sense
when the parent dir is fsl, it's confusing after the move.
The two Marvell bindings have had a "marvell," prefix added to match
their compatibles.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230330173255.109731-1-conor@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Convert the Amlogic Meson6 SoCs Timer Controller bindings to dt-schema.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20221117-b4-amlogic-bindings-convert-v5-1-63781bed4452@linaro.org
Signed-off-by: Rob Herring <robh@kernel.org>
Cleanup bindings dropping unneeded quotes. Once all these are fixed,
checking for this can be enabled in yamllint.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20230322173449.3970718-1-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Cleanup bindings dropping unneeded quotes. Once all these are fixed,
checking for this can be enabled in yamllint.
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Florian Fainelli <f.fainelli@gmail.com> # Broadcom
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20230322173508.3971182-1-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Cleanup bindings dropping unneeded quotes. Once all these are fixed,
checking for this can be enabled in yamllint.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> # for mediatek,mt6779-keypad.yaml
Link: https://lore.kernel.org/r/20230320234718.2930154-1-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Cleanup bindings dropping unneeded quotes. Once all these are fixed,
checking for this can be enabled in yamllint.
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Acked-by: Hector Martin <marcan@marcan.st>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Florian Fainelli <f.fainelli@gmail.com> #brcm,bcm7038-wdt.yaml
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230317233643.3969019-1-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Cleanup bindings dropping unneeded quotes. Once all these are fixed,
checking for this can be enabled in yamllint.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230320233911.2920364-1-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Cleanup bindings dropping unneeded quotes. Once all these are fixed,
checking for this can be enabled in yamllint.
Reviewed-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230327170122.4103518-1-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Cleanup bindings dropping unneeded quotes. Once all these are fixed,
checking for this can be enabled in yamllint.
Acked-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Link: https://lore.kernel.org/r/20230327170053.4100949-1-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Cleanup bindings dropping unneeded quotes. Once all these are fixed,
checking for this can be enabled in yamllint.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230320233928.2920693-1-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Due to lack of maintainance and stall of development for a few years now,
and since no new features will ever be added upstream, remove the
OX810 and OX820 SoC and boards bindings.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Daniel Golle <daniel@makrotopia.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Devicetree changes for omaps for gta04, Phytec am335x devices, and to
drop a obsolete compatible property:
- A non-urgent fix for gta04 to enable more dma channels for some audio
configurations
- Update the dts compatible and vendor prefixes for gta04
- A series of updates for Phytec am335x based boards to configure more
devices like rtc and audio, and a few clean-up patches
- A change to drop the usage of "ti,omap36xx" compatible, the driver
code already checks for "ti,omap3630" that is also alread set in the
dts files. This makes the yaml binding conversion a bit simpler.
-----BEGIN PGP SIGNATURE-----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=iNMn
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=yJ9h
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v6.4/dt-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into soc/dt
Devicetree changes for omaps for v6.4
Devicetree changes for omaps for gta04, Phytec am335x devices, and to
drop a obsolete compatible property:
- A non-urgent fix for gta04 to enable more dma channels for some audio
configurations
- Update the dts compatible and vendor prefixes for gta04
- A series of updates for Phytec am335x based boards to configure more
devices like rtc and audio, and a few clean-up patches
- A change to drop the usage of "ti,omap36xx" compatible, the driver
code already checks for "ti,omap3630" that is also alread set in the
dts files. This makes the yaml binding conversion a bit simpler.
* tag 'omap-for-v6.4/dt-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: dts: omap: Drop ti,omap36xx compatible
ARM: dts: am335x-phycore-som: Remove superseded/invalid GPMC NAND type.
ARM: dts: am335x-pcm-953: Remove superseded/invalid LED trigger.
ARM: dts: am335x-phycore-som: Remove underscore in node names.
ARM: dts: am335x-regor: Remove underscore in node names.
ARM: dts: am335x-pcm-935: Remove underscore in node names.
ARM: dts: am335x-wega: Change node name of sound card, remove underscores.
ARM: dts: am335x-wega: Fix audio codec by using simple-audio-card driver.
ARM: dts: am335x-phycore-som: Add alias for TPS65910 RTC
ARM: dts: omap3-gta04: fix compatible record for GTA04 board
ARM: dts: gta04: fix excess dma channel usage
Link: https://lore.kernel.org/r/pull-1680180389-756753@atomide.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Adds support for signalling from secure world with per-cpu interrupts in
addition to edge-triggered peripheral interrupts.
-----BEGIN PGP SIGNATURE-----
iQJOBAABCgA4FiEEFV+gSSXZJY9ZyuB5LinzTIcAHJcFAmQrwJYaHGplbnMud2lr
bGFuZGVyQGxpbmFyby5vcmcACgkQLinzTIcAHJfyKw//TT/y0aSbxvg/9VY7ShAu
ULhR4f50ariYtEqz5ulv3c+6T+ANP3uR788uF+5udDWQC0T1/siNWTAG5F0IxXt2
UzGi7O0iVzbfA1PsQyjWQvZko5mQd1a8UV6rBodK/ACXxjj/8WVBnd/7AtOa31wm
nRhpXCA3xGpqFdXfwuaksZFMOiCF1c4lR8KUxLkVvO7fElt+LVLB4cf54ZLKW4qC
q8oAD7uo2An5gBgWkz3vCf7vSBpwnjCv13vxRbJZJtQR3OtjlivbfLpwlepDKk/B
kcK88USc0AmrhG7hVYIANwey29setiDG+xwp1wVaJazGUjboUycnTLwQRx1JPEaS
cTezfJG2DQsWEYpZB8uBHbi9ReZ278q2hAu/vYy7WsAgxZ7grN1718bKvA98IAb+
erSR8TB5IHI31IQ5HISb6NORCaGWl+yPDbH0mKqi0UVSCUg2qvjTeFr9r6izN49K
Mnw6BUakXtQTMyl5DsNc8uPik0L5LND/iQkyBcemGDjzrNwG6IUYjvz2VTs/0a6j
eJb10MVJ0pXemX5/zHKjQawGxjvr5q9HklYfo9EjUSSNKSI6hKdHK3JPy/mPyBtN
8WeFs+OkxF598QTdzCHtbfVXUkH2JuMdtV94RYYOqaa6nA6HyfA/I/RccRqUqQHY
eOqTBrPwTpzrrqbDXxtfFV8=
=yLJe
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=2bJ5
-----END PGP SIGNATURE-----
Merge tag 'optee-per-cpu-irq-for-v6.4' of https://git.linaro.org/people/jens.wiklander/linux-tee into soc/drivers
Add OP-TEE per cpu asynchronous notification
Adds support for signalling from secure world with per-cpu interrupts in
addition to edge-triggered peripheral interrupts.
* tag 'optee-per-cpu-irq-for-v6.4' of https://git.linaro.org/people/jens.wiklander/linux-tee:
optee: add per cpu asynchronous notification
dt-bindings: optee driver interrupt can be a per-cpu interrupt
Link: https://lore.kernel.org/r/20230404062727.GA2765560@rayden
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cleanup bindings dropping unneeded quotes. Once all these are fixed,
checking for this can be enabled in yamllint.
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Document the combination of the P3768 carrier board with the P3767
(Jetson Orin NX) module.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The Jetson Orin NX is the latest iteration in the NX family of Jetson
products. Document the compatible strings used for these devices.
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
structure field directly, access the sensor device instead the
thermal zone's device for trace, relocate the traces in
drivers/thermal (Daniel Lezcano)
- Use the generic trip point for the i.MX and remove the get_trip_temp
ops (Daniel Lezcano)
- Use the devm_platform_ioremap_resource() in the Hisilicon driver
(Yang Li)
- Remove R-Car H3 ES1.* handling as public has only access to the ES2
version and the upstream support for the ES1 has been shutdown (Wolfram Sang)
- Add a delay after initializing the bank in order to let the time to
the hardware to initialze itself before reading the temperature
(Amjad Ouled-Ameur)
- Add MT8365 support (Amjad Ouled-Ameur)
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEGn3N4YVz0WNVyHskqDIjiipP6E8FAmQof0cACgkQqDIjiipP
6E/tXQgArKKlM52mo3pg880JsiWOWGrS7pJN0x9MR0nqUm83sLTDf21fPoYmn+EJ
wrzClIX1iHCDVCWCVxao7OIT1mxez9L2NAHseXDSDQJcZ0fflTE8wZ8xeLr6q5GN
/ifHfCqiC98yejPcKIf2TqdGgqpCzyQ++sZoc3H6/jwysSkFlBc+YgKx+XasQR6k
5swQ3E81zx0ouB+t1GDieXB6YRsjZzR2KQbbExoHexPue1DTIuuumz8M1Fgz4a4b
gXRHbrGp3vmLORIAOZiVDyjzC7jwy7oN552g16yZLGDUdLaJ03gRRx7fvNzDUEMW
mBzxak4WnNWEatCh691X6W5MdPO/uQ==
=naJV
-----END PGP SIGNATURE-----
Merge tag 'thermal-v6.4-rc1-1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/thermal/linux
Pull thermal control material for 6.4-rc1 from Daniel Lezcano:
"- Add more thermal zone device encapsulation: prevent setting
structure field directly, access the sensor device instead the
thermal zone's device for trace, relocate the traces in
drivers/thermal (Daniel Lezcano)
- Use the generic trip point for the i.MX and remove the get_trip_temp
ops (Daniel Lezcano)
- Use the devm_platform_ioremap_resource() in the Hisilicon driver
(Yang Li)
- Remove R-Car H3 ES1.* handling as public has only access to the ES2
version and the upstream support for the ES1 has been shutdown (Wolfram
Sang)
- Add a delay after initializing the bank in order to let the time to
the hardware to initialze itself before reading the temperature
(Amjad Ouled-Ameur)
- Add MT8365 support (Amjad Ouled-Ameur)"
* tag 'thermal-v6.4-rc1-1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/thermal/linux:
thermal/drivers/ti: Use fixed update interval
thermal/drivers/stm: Don't set no_hwmon to false
thermal/drivers/db8500: Use driver dev instead of tz->device
thermal/core: Relocate the traces definition in thermal directory
thermal/drivers/hisi: Use devm_platform_ioremap_resource()
thermal/drivers/imx: Use the thermal framework for the trip point
thermal/drivers/imx: Remove get_trip_temp ops
thermal/drivers/rcar_gen3_thermal: Remove R-Car H3 ES1.* handling
thermal/drivers/mediatek: Add delay after thermal banks initialization
thermal/drivers/mediatek: Add support for MT8365 SoC
thermal/drivers/mediatek: Control buffer enablement tweaks
dt-bindings: thermal: mediatek: Add binding documentation for MT8365 SoC
Commit 71ca776a88 ("regulator: qcom-rpmh: Add pmc8180 and pmc8180c")
introduced these compatible's but the yaml conversion commit
7255f98d08 ("regulator: Convert RPMh regulator bindings to YAML")
seems to have dropped it
So bring it back!
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230325122444.249507-9-vkoul@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
