There are multiple use-cases when it's convenient to have access to bpf
map fields, both `struct bpf_map` and map type specific struct-s such as
`struct bpf_array`, `struct bpf_htab`, etc.
For example while working with sock arrays it can be necessary to
calculate the key based on map->max_entries (some_hash % max_entries).
Currently this is solved by communicating max_entries via "out-of-band"
channel, e.g. via additional map with known key to get info about target
map. That works, but is not very convenient and error-prone while
working with many maps.
In other cases necessary data is dynamic (i.e. unknown at loading time)
and it's impossible to get it at all. For example while working with a
hash table it can be convenient to know how much capacity is already
used (bpf_htab.count.counter for BPF_F_NO_PREALLOC case).
At the same time kernel knows this info and can provide it to bpf
program.
Fill this gap by adding support to access bpf map fields from bpf
program for both `struct bpf_map` and map type specific fields.
Support is implemented via btf_struct_access() so that a user can define
their own `struct bpf_map` or map type specific struct in their program
with only necessary fields and preserve_access_index attribute, cast a
map to this struct and use a field.
For example:
struct bpf_map {
__u32 max_entries;
} __attribute__((preserve_access_index));
struct bpf_array {
struct bpf_map map;
__u32 elem_size;
} __attribute__((preserve_access_index));
struct {
__uint(type, BPF_MAP_TYPE_ARRAY);
__uint(max_entries, 4);
__type(key, __u32);
__type(value, __u32);
} m_array SEC(".maps");
SEC("cgroup_skb/egress")
int cg_skb(void *ctx)
{
struct bpf_array *array = (struct bpf_array *)&m_array;
struct bpf_map *map = (struct bpf_map *)&m_array;
/* .. use map->max_entries or array->map.max_entries .. */
}
Similarly to other btf_struct_access() use-cases (e.g. struct tcp_sock
in net/ipv4/bpf_tcp_ca.c) the patch allows access to any fields of
corresponding struct. Only reading from map fields is supported.
For btf_struct_access() to work there should be a way to know btf id of
a struct that corresponds to a map type. To get btf id there should be a
way to get a stringified name of map-specific struct, such as
"bpf_array", "bpf_htab", etc for a map type. Two new fields are added to
`struct bpf_map_ops` to handle it:
* .map_btf_name keeps a btf name of a struct returned by map_alloc();
* .map_btf_id is used to cache btf id of that struct.
To make btf ids calculation cheaper they're calculated once while
preparing btf_vmlinux and cached same way as it's done for btf_id field
of `struct bpf_func_proto`
While calculating btf ids, struct names are NOT checked for collision.
Collisions will be checked as a part of the work to prepare btf ids used
in verifier in compile time that should land soon. The only known
collision for `struct bpf_htab` (kernel/bpf/hashtab.c vs
net/core/sock_map.c) was fixed earlier.
Both new fields .map_btf_name and .map_btf_id must be set for a map type
for the feature to work. If neither is set for a map type, verifier will
return ENOTSUPP on a try to access map_ptr of corresponding type. If
just one of them set, it's verifier misconfiguration.
Only `struct bpf_array` for BPF_MAP_TYPE_ARRAY and `struct bpf_htab` for
BPF_MAP_TYPE_HASH are supported by this patch. Other map types will be
supported separately.
The feature is available only for CONFIG_DEBUG_INFO_BTF=y and gated by
perfmon_capable() so that unpriv programs won't have access to bpf map
fields.
Signed-off-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/6479686a0cd1e9067993df57b4c3eef0e276fec9.1592600985.git.rdna@fb.com
There are two different `struct bpf_htab` in bpf code in the following
files:
- kernel/bpf/hashtab.c
- net/core/sock_map.c
It makes it impossible to find proper btf_id by name = "bpf_htab" and
kind = BTF_KIND_STRUCT what is needed to support access to map ptr so
that bpf program can access `struct bpf_htab` fields.
To make it possible one of the struct-s should be renamed, sock_map.c
looks like a better candidate for rename since it's specialized version
of hashtab.
Rename it to bpf_shtab ("sh" stands for Sock Hash).
Signed-off-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/c006a639e03c64ca50fc87c4bb627e0bfba90f4e.1592600985.git.rdna@fb.com
btf_parse_vmlinux() implements manual search for struct bpf_ctx_convert
since at the time of implementing btf_find_by_name_kind() was not
available.
Later btf_find_by_name_kind() was introduced in 27ae7997a6 ("bpf:
Introduce BPF_PROG_TYPE_STRUCT_OPS"). It provides similar search
functionality and can be leveraged in btf_parse_vmlinux(). Do it.
Signed-off-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/6e12d5c3e8a3d552925913ef73a695dd1bb27800.1592600985.git.rdna@fb.com
Relicense it to be compatible with the rest of bpftool files.
Suggested-by: Quentin Monnet <quentin@isovalent.com>
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200619222024.519774-1-andriin@fb.com
Added two test_verifier subtests for 32bit pointer/scalar arithmetic
with BPF_SUB operator. They are passing verifier now.
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200618234632.3321367-1-yhs@fb.com
When do experiments with llvm (disabling instcombine and
simplifyCFG), I hit the following error with test_seg6_loop.o.
; R1=pkt(id=0,off=0,r=48,imm=0), R7=pkt(id=0,off=40,r=48,imm=0)
w2 = w7
; R2_w=inv(id=0,umax_value=4294967295,var_off=(0x0; 0xffffffff))
w2 -= w1
R2 32-bit pointer arithmetic prohibited
The corresponding source code is:
uint32_t srh_off
// srh and skb->data are all packet pointers
srh_off = (char *)srh - (char *)(long)skb->data;
The verifier does not support 32-bit pointer/scalar arithmetic.
Without my llvm change, the code looks like
; R3=pkt(id=0,off=40,r=48,imm=0), R8=pkt(id=0,off=0,r=48,imm=0)
w3 -= w8
; R3_w=inv(id=0)
This is explicitly allowed in verifier if both registers are
pointers and the opcode is BPF_SUB.
To fix this problem, I changed the verifier to allow
32-bit pointer/scaler BPF_SUB operations.
At the source level, the issue could be workarounded with
inline asm or changing "uint32_t srh_off" to "uint64_t srh_off".
But I feel that verifier change might be the right thing to do.
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20200618234631.3321118-1-yhs@fb.com
The cache_idx is currently picked by RR. There is chance that
the same cache_idx will be picked by multiple sk_storage_maps while
other cache_idx is still unused. e.g. It could happen when the
sk_storage_map is recreated during the restart of the user
space process.
This patch tracks the usage count for each cache_idx. There is
16 of them now (defined in BPF_SK_STORAGE_CACHE_SIZE).
It will try to pick the free cache_idx. If none was found,
it would pick one with the minimal usage count.
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20200617174226.2301909-1-kafai@fb.com
Pull networking fixes from David Miller:
1) Don't get per-cpu pointer with preemption enabled in nft_set_pipapo,
fix from Stefano Brivio.
2) Fix memory leak in ctnetlink, from Pablo Neira Ayuso.
3) Multiple definitions of MPTCP_PM_MAX_ADDR, from Geliang Tang.
4) Accidently disabling NAPI in non-error paths of macb_open(), from
Charles Keepax.
5) Fix races between alx_stop and alx_remove, from Zekun Shen.
6) We forget to re-enable SRIOV during resume in bnxt_en driver, from
Michael Chan.
7) Fix memory leak in ipv6_mc_destroy_dev(), from Wang Hai.
8) rxtx stats use wrong index in mvpp2 driver, from Sven Auhagen.
9) Fix memory leak in mptcp_subflow_create_socket error path, from Wei
Yongjun.
10) We should not adjust the TCP window advertised when sending dup acks
in non-SACK mode, because it won't be counted as a dup by the sender
if the window size changes. From Eric Dumazet.
11) Destroy the right number of queues during remove in mvpp2 driver,
from Sven Auhagen.
12) Various WOL and PM fixes to e1000 driver, from Chen Yu, Vaibhav
Gupta, and Arnd Bergmann.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (35 commits)
e1000e: fix unused-function warning
e1000: use generic power management
e1000e: Do not wake up the system via WOL if device wakeup is disabled
lan743x: add MODULE_DEVICE_TABLE for module loading alias
mlxsw: spectrum: Adjust headroom buffers for 8x ports
bareudp: Fixed configuration to avoid having garbage values
mvpp2: remove module bugfix
tcp: grow window for OOO packets only for SACK flows
mptcp: fix memory leak in mptcp_subflow_create_socket()
netfilter: flowtable: Make nf_flow_table_offload_add/del_cb inline
net/sched: act_ct: Make tcf_ct_flow_table_restore_skb inline
net: dsa: sja1105: fix PTP timestamping with large tc-taprio cycles
mvpp2: ethtool rxtx stats fix
MAINTAINERS: switch to my private email for Renesas Ethernet drivers
rocker: fix incorrect error handling in dma_rings_init
test_objagg: Fix potential memory leak in error handling
net: ethernet: mtk-star-emac: simplify interrupt handling
mld: fix memory leak in ipv6_mc_destroy_dev()
bnxt_en: Return from timer if interface is not in open state.
bnxt_en: Fix AER reset logic on 57500 chips.
...
-----BEGIN PGP SIGNATURE-----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=bYOZ
-----END PGP SIGNATURE-----
Merge tag 'afs-fixes-20200616' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs
Pull AFS fixes from David Howells:
"I've managed to get xfstests kind of working with afs. Here are a set
of patches that fix most of the bugs found.
There are a number of primary issues:
- Incorrect handling of mtime and non-handling of ctime. It might be
argued, that the latter isn't a bug since the AFS protocol doesn't
support ctime, but I should probably still update it locally.
- Shared-write mmap, truncate and writeback bugs. This includes not
changing i_size under the callback lock, overwriting local i_size
with the reply from the server after a partial writeback, not
limiting the writeback from an mmapped page to EOF.
- Checks for an abort code indicating that the primary vnode in an
operation was deleted by a third-party are done in the wrong place.
- Silly rename bugs. This includes an incomplete conversion to the
new operation handling, duplicate nlink handling, nlink changing
not being done inside the callback lock and insufficient handling
of third-party conflicting directory changes.
And some secondary ones:
- The UAEOVERFLOW abort code should map to EOVERFLOW not EREMOTEIO.
- Remove a couple of unused or incompletely used bits.
- Remove a couple of redundant success checks.
These seem to fix all the data-corruption bugs found by
./check -afs -g quick
along with the obvious silly rename bugs and time bugs.
There are still some test failures, but they seem to fall into two
classes: firstly, the authentication/security model is different to
the standard UNIX model and permission is arbitrated by the server and
cached locally; and secondly, there are a number of features that AFS
does not support (such as mknod). But in these cases, the tests
themselves need to be adapted or skipped.
Using the in-kernel afs client with xfstests also found a bug in the
AuriStor AFS server that has been fixed for a future release"
* tag 'afs-fixes-20200616' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs:
afs: Fix silly rename
afs: afs_vnode_commit_status() doesn't need to check the RPC error
afs: Fix use of afs_check_for_remote_deletion()
afs: Remove afs_operation::abort_code
afs: Fix yfs_fs_fetch_status() to honour vnode selector
afs: Remove yfs_fs_fetch_file_status() as it's not used
afs: Fix the mapping of the UAEOVERFLOW abort code
afs: Fix truncation issues and mmap writeback size
afs: Concoct ctimes
afs: Fix EOF corruption
afs: afs_write_end() should change i_size under the right lock
afs: Fix non-setting of mtime when writing into mmap
Hi Linus,
Please, pull the following patches that replace zero-length arrays with
flexible-array members.
Notice that all of these patches have been baking in linux-next for
two development cycles now.
There is a regular need in the kernel to provide a way to declare having a
dynamically sized set of trailing elements in a structure. Kernel code should
always use “flexible array members”[1] for these cases. The older style of
one-element or zero-length arrays should no longer be used[2].
C99 introduced “flexible array members”, which lacks a numeric size for the
array declaration entirely:
struct something {
size_t count;
struct foo items[];
};
This is the way the kernel expects dynamically sized trailing elements to be
declared. It allows the compiler to generate errors when the flexible array
does not occur last in the structure, which helps to prevent some kind of
undefined behavior[3] bugs from being inadvertently introduced to the codebase.
It also allows the compiler to correctly analyze array sizes (via sizeof(),
CONFIG_FORTIFY_SOURCE, and CONFIG_UBSAN_BOUNDS). For instance, there is no
mechanism that warns us that the following application of the sizeof() operator
to a zero-length array always results in zero:
struct something {
size_t count;
struct foo items[0];
};
struct something *instance;
instance = kmalloc(struct_size(instance, items, count), GFP_KERNEL);
instance->count = count;
size = sizeof(instance->items) * instance->count;
memcpy(instance->items, source, size);
At the last line of code above, size turns out to be zero, when one might have
thought it represents the total size in bytes of the dynamic memory recently
allocated for the trailing array items. Here are a couple examples of this
issue[4][5]. Instead, flexible array members have incomplete type, and so the
sizeof() operator may not be applied[6], so any misuse of such operators will
be immediately noticed at build time.
The cleanest and least error-prone way to implement this is through the use of
a flexible array member:
struct something {
size_t count;
struct foo items[];
};
struct something *instance;
instance = kmalloc(struct_size(instance, items, count), GFP_KERNEL);
instance->count = count;
size = sizeof(instance->items[0]) * instance->count;
memcpy(instance->items, source, size);
Thanks
--
Gustavo
[1] https://en.wikipedia.org/wiki/Flexible_array_member
[2] https://github.com/KSPP/linux/issues/21
[3] https://git.kernel.org/linus/76497732932f15e7323dc805e8ea8dc11bb587cf
[4] https://git.kernel.org/linus/f2cd32a443da694ac4e28fbf4ac6f9d5cc63a539
[5] https://git.kernel.org/linus/ab91c2a89f86be2898cee208d492816ec238b2cf
[6] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
-----BEGIN PGP SIGNATURE-----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=8HUQ
-----END PGP SIGNATURE-----
Merge tag 'flex-array-conversions-5.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux
Pull flexible-array member conversions from Gustavo A. R. Silva:
"Replace zero-length arrays with flexible-array members.
Notice that all of these patches have been baking in linux-next for
two development cycles now.
There is a regular need in the kernel to provide a way to declare
having a dynamically sized set of trailing elements in a structure.
Kernel code should always use “flexible array members”[1] for these
cases. The older style of one-element or zero-length arrays should no
longer be used[2].
C99 introduced “flexible array members”, which lacks a numeric size
for the array declaration entirely:
struct something {
size_t count;
struct foo items[];
};
This is the way the kernel expects dynamically sized trailing elements
to be declared. It allows the compiler to generate errors when the
flexible array does not occur last in the structure, which helps to
prevent some kind of undefined behavior[3] bugs from being
inadvertently introduced to the codebase.
It also allows the compiler to correctly analyze array sizes (via
sizeof(), CONFIG_FORTIFY_SOURCE, and CONFIG_UBSAN_BOUNDS). For
instance, there is no mechanism that warns us that the following
application of the sizeof() operator to a zero-length array always
results in zero:
struct something {
size_t count;
struct foo items[0];
};
struct something *instance;
instance = kmalloc(struct_size(instance, items, count), GFP_KERNEL);
instance->count = count;
size = sizeof(instance->items) * instance->count;
memcpy(instance->items, source, size);
At the last line of code above, size turns out to be zero, when one
might have thought it represents the total size in bytes of the
dynamic memory recently allocated for the trailing array items. Here
are a couple examples of this issue[4][5].
Instead, flexible array members have incomplete type, and so the
sizeof() operator may not be applied[6], so any misuse of such
operators will be immediately noticed at build time.
The cleanest and least error-prone way to implement this is through
the use of a flexible array member:
struct something {
size_t count;
struct foo items[];
};
struct something *instance;
instance = kmalloc(struct_size(instance, items, count), GFP_KERNEL);
instance->count = count;
size = sizeof(instance->items[0]) * instance->count;
memcpy(instance->items, source, size);
instead"
[1] https://en.wikipedia.org/wiki/Flexible_array_member
[2] https://github.com/KSPP/linux/issues/21
[3] commit 7649773293 ("cxgb3/l2t: Fix undefined behaviour")
[4] commit f2cd32a443 ("rndis_wlan: Remove logically dead code")
[5] commit ab91c2a89f ("tpm: eventlog: Replace zero-length array with flexible-array member")
[6] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
* tag 'flex-array-conversions-5.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux: (41 commits)
w1: Replace zero-length array with flexible-array
tracing/probe: Replace zero-length array with flexible-array
soc: ti: Replace zero-length array with flexible-array
tifm: Replace zero-length array with flexible-array
dmaengine: tegra-apb: Replace zero-length array with flexible-array
stm class: Replace zero-length array with flexible-array
Squashfs: Replace zero-length array with flexible-array
ASoC: SOF: Replace zero-length array with flexible-array
ima: Replace zero-length array with flexible-array
sctp: Replace zero-length array with flexible-array
phy: samsung: Replace zero-length array with flexible-array
RxRPC: Replace zero-length array with flexible-array
rapidio: Replace zero-length array with flexible-array
media: pwc: Replace zero-length array with flexible-array
firmware: pcdp: Replace zero-length array with flexible-array
oprofile: Replace zero-length array with flexible-array
block: Replace zero-length array with flexible-array
tools/testing/nvdimm: Replace zero-length array with flexible-array
libata: Replace zero-length array with flexible-array
kprobes: Replace zero-length array with flexible-array
...
The purgatory Makefile removes -fstack-protector options if they were
configured in, but does not currently add -fno-stack-protector.
If gcc was configured with the --enable-default-ssp configure option,
this results in the stack protector still being enabled for the
purgatory (absent distro-specific specs files that might disable it
again for freestanding compilations), if the main kernel is being
compiled with stack protection enabled (if it's disabled for the main
kernel, the top-level Makefile will add -fno-stack-protector).
This will break the build since commit
e4160b2e4b ("x86/purgatory: Fail the build if purgatory.ro has missing symbols")
and prior to that would have caused runtime failure when trying to use
kexec.
Explicitly add -fno-stack-protector to avoid this, as done in other
Makefiles that need to disable the stack protector.
Reported-by: Gabriel C <nix.or.die@googlemail.com>
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jeff Kirsher says:
====================
Intel Wired LAN Driver Updates 2020-06-16
This series contains fixes to e1000 and e1000e.
Chen fixes an e1000e issue where systems could be waken via WoL, even
though the user has disabled the wakeup bit via sysfs.
Vaibhav Gupta updates the e1000 driver to clean up the legacy Power
Management hooks.
Arnd Bergmann cleans up the inconsistent use CONFIG_PM_SLEEP
preprocessor tags, which also resolves the compiler warnings about the
possibility of unused structure.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The CONFIG_PM_SLEEP #ifdef checks in this file are inconsistent,
leading to a warning about sometimes unused function:
drivers/net/ethernet/intel/e1000e/netdev.c:137:13: error: unused function 'e1000e_check_me' [-Werror,-Wunused-function]
Rather than adding more #ifdefs, just remove them completely
and mark the PM functions as __maybe_unused to let the compiler
work it out on it own.
Fixes: e086ba2fcc ("e1000e: disable s0ix entry and exit flows for ME systems")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
With legacy PM hooks, it was the responsibility of a driver to manage PCI
states and also the device's power state. The generic approach is to let PCI
core handle the work.
e1000_suspend() calls __e1000_shutdown() to perform intermediate tasks.
__e1000_shutdown() modifies the value of "wake" (device should be wakeup
enabled or not), responsible for controlling the flow of legacy PM.
Since, PCI core has no idea about the value of "wake", new code for generic
PM may produce unexpected results. Thus, use "device_set_wakeup_enable()"
to wakeup-enable the device accordingly.
Signed-off-by: Vaibhav Gupta <vaibhavgupta40@gmail.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Currently the system will be woken up via WOL(Wake On LAN) even if the
device wakeup ability has been disabled via sysfs:
cat /sys/devices/pci0000:00/0000:00:1f.6/power/wakeup
disabled
The system should not be woken up if the user has explicitly
disabled the wake up ability for this device.
This patch clears the WOL ability of this network device if the
user has disabled the wake up ability in sysfs.
Fixes: bc7f75fa97 ("[E1000E]: New pci-express e1000 driver")
Reported-by: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Chen Yu <yu.c.chen@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Without a MODULE_DEVICE_TABLE the attributes are missing that create
an alias for auto-loading the module in userspace via hotplug.
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix AFS's silly rename by the following means:
(1) Set the destination directory in afs_do_silly_rename() so as to avoid
misbehaviour and indicate that the directory data version will
increment by 1 so as to avoid warnings about unexpected changes in the
DV. Also indicate that the ctime should be updated to avoid xfstest
grumbling.
(2) Note when the server indicates that a directory changed more than we
expected (AFS_OPERATION_DIR_CONFLICT), indicating a conflict with a
third party change, checking on successful completion of unlink and
rename.
The problem is that the FS.RemoveFile RPC op doesn't report the status
of the unlinked file, though YFS.RemoveFile2 does. This can be
mitigated by the assumption that if the directory DV cranked by
exactly 1, we can be sure we removed one link from the file; further,
ordinarily in AFS, files cannot be hardlinked across directories, so
if we reduce nlink to 0, the file is deleted.
However, if the directory DV jumps by more than 1, we cannot know if a
third party intervened by adding or removing a link on the file we
just removed a link from.
The same also goes for any vnode that is at the destination of the
FS.Rename RPC op.
(3) Make afs_vnode_commit_status() apply the nlink drop inside the cb_lock
section along with the other attribute updates if ->op_unlinked is set
on the descriptor for the appropriate vnode.
(4) Issue a follow up status fetch to the unlinked file in the event of a
third party conflict that makes it impossible for us to know if we
actually deleted the file or not.
(5) Provide a flag, AFS_VNODE_SILLY_DELETED, to make afs_getattr() lie to
the user about the nlink of a silly deleted file so that it appears as
0, not 1.
Found with the generic/035 and generic/084 xfstests.
Fixes: e49c7b2f6d ("afs: Build an abstraction around an "operation" concept")
Reported-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
The port's headroom buffers are used to store packets while they
traverse the device's pipeline and also to store packets that are egress
mirrored.
On Spectrum-3, ports with eight lanes use two headroom buffers between
which the configured headroom size is split.
In order to prevent packet loss, multiply the calculated headroom size
by two for 8x ports.
Fixes: da382875c6 ("mlxsw: spectrum: Extend to support Spectrum-3 ASIC")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Code to initialize the conf structure while gathering the configuration
of the device was missing.
Fixes: 571912c69f ("net: UDP tunnel encapsulation module for tunnelling different protocols like MPLS, IP, NSH etc.")
Signed-off-by: Martin <martin.varghese@nokia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The remove function does not destroy all
BM Pools when per cpu pool is active.
When reloading the mvpp2 as a module the BM Pools
are still active in hardware and due to the bug
have twice the size now old + new.
This eventually leads to a kernel crash.
v2:
* add Fixes tag
Fixes: 7d04b0b13b ("mvpp2: percpu buffers")
Signed-off-by: Sven Auhagen <sven.auhagen@voleatech.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Back in 2013, we made a change that broke fast retransmit
for non SACK flows.
Indeed, for these flows, a sender needs to receive three duplicate
ACK before starting fast retransmit. Sending ACK with different
receive window do not count.
Even if enabling SACK is strongly recommended these days,
there still are some cases where it has to be disabled.
Not increasing the window seems better than having to
rely on RTO.
After the fix, following packetdrill test gives :
// Initialize connection
0 socket(..., SOCK_STREAM, IPPROTO_TCP) = 3
+0 setsockopt(3, SOL_SOCKET, SO_REUSEADDR, [1], 4) = 0
+0 bind(3, ..., ...) = 0
+0 listen(3, 1) = 0
+0 < S 0:0(0) win 32792 <mss 1000,nop,wscale 7>
+0 > S. 0:0(0) ack 1 <mss 1460,nop,wscale 8>
+0 < . 1:1(0) ack 1 win 514
+0 accept(3, ..., ...) = 4
+0 < . 1:1001(1000) ack 1 win 514
// Quick ack
+0 > . 1:1(0) ack 1001 win 264
+0 < . 2001:3001(1000) ack 1 win 514
// DUPACK : Normally we should not change the window
+0 > . 1:1(0) ack 1001 win 264
+0 < . 3001:4001(1000) ack 1 win 514
// DUPACK : Normally we should not change the window
+0 > . 1:1(0) ack 1001 win 264
+0 < . 4001:5001(1000) ack 1 win 514
// DUPACK : Normally we should not change the window
+0 > . 1:1(0) ack 1001 win 264
+0 < . 1001:2001(1000) ack 1 win 514
// Hole is repaired.
+0 > . 1:1(0) ack 5001 win 272
Fixes: 4e4f1fc226 ("tcp: properly increase rcv_ssthresh for ofo packets")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Venkat Venkatsubra <venkat.x.venkatsubra@oracle.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
afs_vnode_commit_status() is only ever called if op->error is 0, so remove
the op->error checks from the function.
Fixes: e49c7b2f6d ("afs: Build an abstraction around an "operation" concept")
Signed-off-by: David Howells <dhowells@redhat.com>
afs_check_for_remote_deletion() checks to see if error ENOENT is returned
by the server in response to an operation and, if so, marks the primary
vnode as having been deleted as the FID is no longer valid.
However, it's being called from the operation success functions, where no
abort has happened - and if an inline abort is recorded, it's handled by
afs_vnode_commit_status().
Fix this by actually calling the operation aborted method if provided and
having that point to afs_check_for_remote_deletion().
Fixes: e49c7b2f6d ("afs: Build an abstraction around an "operation" concept")
Signed-off-by: David Howells <dhowells@redhat.com>
Fix yfs_fs_fetch_status() to honour the vnode selector in
op->fetch_status.which as does afs_fs_fetch_status() that allows
afs_do_lookup() to use this as an alternative to the InlineBulkStatus RPC
call if not implemented by the server.
This doesn't matter in the current code as YFS servers always implement
InlineBulkStatus, but a subsequent will call it on YFS servers too in some
circumstances.
Fixes: e49c7b2f6d ("afs: Build an abstraction around an "operation" concept")
Signed-off-by: David Howells <dhowells@redhat.com>
There is a regular need in the kernel to provide a way to declare having a
dynamically sized set of trailing elements in a structure. Kernel code should
always use “flexible array members”[1] for these cases. The older style of
one-element or zero-length arrays should no longer be used[2].
[1] https://en.wikipedia.org/wiki/Flexible_array_member
[2] https://github.com/KSPP/linux/issues/21
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
There is a regular need in the kernel to provide a way to declare having a
dynamically sized set of trailing elements in a structure. Kernel code should
always use “flexible array members”[1] for these cases. The older style of
one-element or zero-length arrays should no longer be used[2].
[1] https://en.wikipedia.org/wiki/Flexible_array_member
[2] https://github.com/KSPP/linux/issues/21
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
There is a regular need in the kernel to provide a way to declare having a
dynamically sized set of trailing elements in a structure. Kernel code should
always use “flexible array members”[1] for these cases. The older style of
one-element or zero-length arrays should no longer be used[2].
[1] https://en.wikipedia.org/wiki/Flexible_array_member
[2] https://github.com/KSPP/linux/issues/21
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
There is a regular need in the kernel to provide a way to declare having a
dynamically sized set of trailing elements in a structure. Kernel code should
always use “flexible array members”[1] for these cases. The older style of
one-element or zero-length arrays should no longer be used[2].
[1] https://en.wikipedia.org/wiki/Flexible_array_member
[2] https://github.com/KSPP/linux/issues/21
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
There is a regular need in the kernel to provide a way to declare having a
dynamically sized set of trailing elements in a structure. Kernel code should
always use “flexible array members”[1] for these cases. The older style of
one-element or zero-length arrays should no longer be used[2].
[1] https://en.wikipedia.org/wiki/Flexible_array_member
[2] https://github.com/KSPP/linux/issues/21
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
There is a regular need in the kernel to provide a way to declare having a
dynamically sized set of trailing elements in a structure. Kernel code should
always use “flexible array members”[1] for these cases. The older style of
one-element or zero-length arrays should no longer be used[2].
[1] https://en.wikipedia.org/wiki/Flexible_array_member
[2] https://github.com/KSPP/linux/issues/21
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
There is a regular need in the kernel to provide a way to declare having a
dynamically sized set of trailing elements in a structure. Kernel code should
always use “flexible array members”[1] for these cases. The older style of
one-element or zero-length arrays should no longer be used[2].
[1] https://en.wikipedia.org/wiki/Flexible_array_member
[2] https://github.com/KSPP/linux/issues/21
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
There is a regular need in the kernel to provide a way to declare having a
dynamically sized set of trailing elements in a structure. Kernel code should
always use “flexible array members”[1] for these cases. The older style of
one-element or zero-length arrays should no longer be used[2].
[1] https://en.wikipedia.org/wiki/Flexible_array_member
[2] https://github.com/KSPP/linux/issues/21
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
There is a regular need in the kernel to provide a way to declare having a
dynamically sized set of trailing elements in a structure. Kernel code should
always use “flexible array members”[1] for these cases. The older style of
one-element or zero-length arrays should no longer be used[2].
[1] https://en.wikipedia.org/wiki/Flexible_array_member
[2] https://github.com/KSPP/linux/issues/21
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
There is a regular need in the kernel to provide a way to declare having a
dynamically sized set of trailing elements in a structure. Kernel code should
always use “flexible array members”[1] for these cases. The older style of
one-element or zero-length arrays should no longer be used[2].
[1] https://en.wikipedia.org/wiki/Flexible_array_member
[2] https://github.com/KSPP/linux/issues/21
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
There is a regular need in the kernel to provide a way to declare having a
dynamically sized set of trailing elements in a structure. Kernel code should
always use “flexible array members”[1] for these cases. The older style of
one-element or zero-length arrays should no longer be used[2].
[1] https://en.wikipedia.org/wiki/Flexible_array_member
[2] https://github.com/KSPP/linux/issues/21
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
There is a regular need in the kernel to provide a way to declare having a
dynamically sized set of trailing elements in a structure. Kernel code should
always use “flexible array members”[1] for these cases. The older style of
one-element or zero-length arrays should no longer be used[2].
[1] https://en.wikipedia.org/wiki/Flexible_array_member
[2] https://github.com/KSPP/linux/issues/21
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
There is a regular need in the kernel to provide a way to declare having a
dynamically sized set of trailing elements in a structure. Kernel code should
always use “flexible array members”[1] for these cases. The older style of
one-element or zero-length arrays should no longer be used[2].
[1] https://en.wikipedia.org/wiki/Flexible_array_member
[2] https://github.com/KSPP/linux/issues/21
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
There is a regular need in the kernel to provide a way to declare having a
dynamically sized set of trailing elements in a structure. Kernel code should
always use “flexible array members”[1] for these cases. The older style of
one-element or zero-length arrays should no longer be used[2].
[1] https://en.wikipedia.org/wiki/Flexible_array_member
[2] https://github.com/KSPP/linux/issues/21
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
There is a regular need in the kernel to provide a way to declare having a
dynamically sized set of trailing elements in a structure. Kernel code should
always use “flexible array members”[1] for these cases. The older style of
one-element or zero-length arrays should no longer be used[2].
[1] https://en.wikipedia.org/wiki/Flexible_array_member
[2] https://github.com/KSPP/linux/issues/21
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
There is a regular need in the kernel to provide a way to declare having a
dynamically sized set of trailing elements in a structure. Kernel code should
always use “flexible array members”[1] for these cases. The older style of
one-element or zero-length arrays should no longer be used[2].
[1] https://en.wikipedia.org/wiki/Flexible_array_member
[2] https://github.com/KSPP/linux/issues/21
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
There is a regular need in the kernel to provide a way to declare having a
dynamically sized set of trailing elements in a structure. Kernel code should
always use “flexible array members”[1] for these cases. The older style of
one-element or zero-length arrays should no longer be used[2].
[1] https://en.wikipedia.org/wiki/Flexible_array_member
[2] https://github.com/KSPP/linux/issues/21
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
There is a regular need in the kernel to provide a way to declare having a
dynamically sized set of trailing elements in a structure. Kernel code should
always use “flexible array members”[1] for these cases. The older style of
one-element or zero-length arrays should no longer be used[2].
[1] https://en.wikipedia.org/wiki/Flexible_array_member
[2] https://github.com/KSPP/linux/issues/21
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
There is a regular need in the kernel to provide a way to declare having a
dynamically sized set of trailing elements in a structure. Kernel code should
always use “flexible array members”[1] for these cases. The older style of
one-element or zero-length arrays should no longer be used[2].
[1] https://en.wikipedia.org/wiki/Flexible_array_member
[2] https://github.com/KSPP/linux/issues/21
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
There is a regular need in the kernel to provide a way to declare having a
dynamically sized set of trailing elements in a structure. Kernel code should
always use “flexible array members”[1] for these cases. The older style of
one-element or zero-length arrays should no longer be used[2].
[1] https://en.wikipedia.org/wiki/Flexible_array_member
[2] https://github.com/KSPP/linux/issues/21
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>