This commit replaces the use of rcu_swap_protected() with the more
intuitively appealing rcu_replace_pointer() as a step towards removing
rcu_swap_protected().
Link: https://lore.kernel.org/lkml/CAHk-=wiAsJLw1egFEE=Z7-GGtM6wcvtyytXZA1+BHqta4gg6Hw@mail.gmail.com/
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Reported-by: Reported-by: kbuild test robot <lkp@intel.com>
[ paulmck: From rcu_replace() to rcu_replace_pointer() per Ingo Molnar. ]
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Cc: Micah Morton <mortonm@chromium.org>
Cc: James Morris <jmorris@namei.org>
Cc: "Serge E. Hallyn" <serge@hallyn.com>
Cc: <linux-security-module@vger.kernel.org>
The first time a rule set is configured for SafeSetID, we shouldn't be
trying to release the previously configured ruleset, since there isn't
one. Currently, the pointer that would point to a previously configured
ruleset is uninitialized on first rule set configuration, leading to a
crash when we try to call release_ruleset with that pointer.
Acked-by: Jann Horn <jannh@google.com>
Signed-off-by: Micah Morton <mortonm@chromium.org>
The capable() hook returns an error number. -EPERM is actually the same as
-1, so this doesn't make a difference in behavior.
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Micah Morton <mortonm@chromium.org>
Someone might write a ruleset like the following, expecting that it
securely constrains UID 1 to UIDs 1, 2 and 3:
1:2
1:3
However, because no constraints are applied to UIDs 2 and 3, an attacker
with UID 1 can simply first switch to UID 2, then switch to any UID from
there. The secure way to write this ruleset would be:
1:2
1:3
2:2
3:3
, which uses "transition to self" as a way to inhibit the default-allow
policy without allowing anything specific.
This is somewhat unintuitive. To make sure that policy authors don't
accidentally write insecure policies because of this, let the kernel verify
that a new ruleset does not contain any entries that are constrained, but
transitively unconstrained.
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Micah Morton <mortonm@chromium.org>
For debugging a running system, it is very helpful to be able to see what
policy the system is using. Add a read handler that can dump out a copy of
the loaded policy.
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Micah Morton <mortonm@chromium.org>
The current API of the SafeSetID LSM uses one write() per rule, and applies
each written rule instantly. This has several downsides:
- While a policy is being loaded, once a single parent-child pair has been
loaded, the parent is restricted to that specific child, even if
subsequent rules would allow transitions to other child UIDs. This means
that during policy loading, set*uid() can randomly fail.
- To replace the policy without rebooting, it is necessary to first flush
all old rules. This creates a time window in which no constraints are
placed on the use of CAP_SETUID.
- If we want to perform sanity checks on the final policy, this requires
that the policy isn't constructed in a piecemeal fashion without telling
the kernel when it's done.
Other kernel APIs - including things like the userns code and netfilter -
avoid this problem by performing updates atomically. Luckily, SafeSetID
hasn't landed in a stable (upstream) release yet, so maybe it's not too
late to completely change the API.
The new API for SafeSetID is: If you want to change the policy, open
"safesetid/whitelist_policy" and write the entire policy,
newline-delimited, in there.
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Micah Morton <mortonm@chromium.org>
Looking at current_cred() in write handlers is bad form, stop doing that.
Also, let's just require that the write is coming from the initial user
namespace. Especially SAFESETID_WHITELIST_FLUSH requires privilege over all
namespaces, and SAFESETID_WHITELIST_ADD should probably require it as well.
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Micah Morton <mortonm@chromium.org>
In preparation for changing the policy parsing logic, refactor the line
parsing logic to be less verbose and move it into a separate function.
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Micah Morton <mortonm@chromium.org>
At the moment, safesetid_security_capable() has two nested conditional
blocks, and one big comment for all the logic. Chop it up and reduce the
amount of indentation.
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Micah Morton <mortonm@chromium.org>
parent_kuid and child_kuid are kuids, there is no reason to make them
uint64_t. (And anyway, in the kernel, the normal name for that would be
u64, not uint64_t.)
check_setuid_policy_hashtable_key() and
check_setuid_policy_hashtable_key_value() are basically the same thing,
merge them.
Also fix the comment that claimed that (1<<8)==128.
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Micah Morton <mortonm@chromium.org>
With the old code, when a process with the (real,effective,saved) UID set
(1,1,1) calls setresuid(2,3,4), safesetid_task_fix_setuid() only checks
whether the transition 1->2 is permitted; the transitions 1->3 and 1->4 are
not checked. Fix this.
This is also a good opportunity to refactor safesetid_task_fix_setuid() to
be less verbose - having one branch per set*uid() syscall is unnecessary.
Note that this slightly changes semantics: The UID transition check for
UIDs that were not in the old cred struct is now always performed against
the policy of the RUID. I think that's more consistent anyway, since the
RUID is also the one that decides whether any policy is enforced at all.
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Micah Morton <mortonm@chromium.org>
Fix the pr_warn() calls in the SafeSetID LSM to have newlines at the end.
Without this, denial messages will be buffered as incomplete lines in
log_output(), and will then only show up once something else prints into
dmesg.
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Micah Morton <mortonm@chromium.org>
Pull force_sig() argument change from Eric Biederman:
"A source of error over the years has been that force_sig has taken a
task parameter when it is only safe to use force_sig with the current
task.
The force_sig function is built for delivering synchronous signals
such as SIGSEGV where the userspace application caused a synchronous
fault (such as a page fault) and the kernel responded with a signal.
Because the name force_sig does not make this clear, and because the
force_sig takes a task parameter the function force_sig has been
abused for sending other kinds of signals over the years. Slowly those
have been fixed when the oopses have been tracked down.
This set of changes fixes the remaining abusers of force_sig and
carefully rips out the task parameter from force_sig and friends
making this kind of error almost impossible in the future"
* 'siginfo-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (27 commits)
signal/x86: Move tsk inside of CONFIG_MEMORY_FAILURE in do_sigbus
signal: Remove the signal number and task parameters from force_sig_info
signal: Factor force_sig_info_to_task out of force_sig_info
signal: Generate the siginfo in force_sig
signal: Move the computation of force into send_signal and correct it.
signal: Properly set TRACE_SIGNAL_LOSE_INFO in __send_signal
signal: Remove the task parameter from force_sig_fault
signal: Use force_sig_fault_to_task for the two calls that don't deliver to current
signal: Explicitly call force_sig_fault on current
signal/unicore32: Remove tsk parameter from __do_user_fault
signal/arm: Remove tsk parameter from __do_user_fault
signal/arm: Remove tsk parameter from ptrace_break
signal/nds32: Remove tsk parameter from send_sigtrap
signal/riscv: Remove tsk parameter from do_trap
signal/sh: Remove tsk parameter from force_sig_info_fault
signal/um: Remove task parameter from send_sigtrap
signal/x86: Remove task parameter from send_sigtrap
signal: Remove task parameter from force_sig_mceerr
signal: Remove task parameter from force_sig
signal: Remove task parameter from force_sigsegv
...
All of the remaining callers pass current into force_sig so
remove the task parameter to make this obvious and to make
misuse more difficult in the future.
This also makes it clear force_sig passes current into force_sig_info.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Add SPDX license identifiers to all Make/Kconfig files which:
- Have no license information of any form
These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:
GPL-2.0-only
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In case of error, the function securityfs_create_dir() returns ERR_PTR()
and never returns NULL. The NULL test in the return value check should
be replaced with IS_ERR().
Fixes: aeca4e2ca6 ("LSM: add SafeSetID module that gates setid calls")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: James Morris <james.morris@microsoft.com>
The include for asm/syscall.h was needed in a prior version of lsm.c
that checked return values of syscall_get_nr, but since we did away with
that part of the code this include is no longer necessary. Take out this
include since it breaks builds for certain architectures. We no longer
have any arch-specific code in SafeSetID.
Signed-off-by: Micah Morton <mortonm@chromium.org>
Signed-off-by: James Morris <james.morris@microsoft.com>
This patch changes the Kconfig file for the SafeSetID LSM to depend on
CONFIG_SECURITY as well as select CONFIG_SECURITYFS, since the policies
for the LSM are configured through writing to securityfs.
Signed-off-by: Micah Morton <mortonm@chromium.org>
Signed-off-by: James Morris <james.morris@microsoft.com>
SafeSetID gates the setid family of syscalls to restrict UID/GID
transitions from a given UID/GID to only those approved by a
system-wide whitelist. These restrictions also prohibit the given
UIDs/GIDs from obtaining auxiliary privileges associated with
CAP_SET{U/G}ID, such as allowing a user to set up user namespace UID
mappings. For now, only gating the set*uid family of syscalls is
supported, with support for set*gid coming in a future patch set.
Signed-off-by: Micah Morton <mortonm@chromium.org>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: James Morris <james.morris@microsoft.com>
