Commit Graph

6 Commits

Author SHA1 Message Date
Linus Torvalds
c8c655c34e s390:
* More phys_to_virt conversions
 
 * Improvement of AP management for VSIE (nested virtualization)
 
 ARM64:
 
 * Numerous fixes for the pathological lock inversion issue that
   plagued KVM/arm64 since... forever.
 
 * New framework allowing SMCCC-compliant hypercalls to be forwarded
   to userspace, hopefully paving the way for some more features
   being moved to VMMs rather than be implemented in the kernel.
 
 * Large rework of the timer code to allow a VM-wide offset to be
   applied to both virtual and physical counters as well as a
   per-timer, per-vcpu offset that complements the global one.
   This last part allows the NV timer code to be implemented on
   top.
 
 * A small set of fixes to make sure that we don't change anything
   affecting the EL1&0 translation regime just after having having
   taken an exception to EL2 until we have executed a DSB. This
   ensures that speculative walks started in EL1&0 have completed.
 
 * The usual selftest fixes and improvements.
 
 KVM x86 changes for 6.4:
 
 * Optimize CR0.WP toggling by avoiding an MMU reload when TDP is enabled,
   and by giving the guest control of CR0.WP when EPT is enabled on VMX
   (VMX-only because SVM doesn't support per-bit controls)
 
 * Add CR0/CR4 helpers to query single bits, and clean up related code
   where KVM was interpreting kvm_read_cr4_bits()'s "unsigned long" return
   as a bool
 
 * Move AMD_PSFD to cpufeatures.h and purge KVM's definition
 
 * Avoid unnecessary writes+flushes when the guest is only adding new PTEs
 
 * Overhaul .sync_page() and .invlpg() to utilize .sync_page()'s optimizations
   when emulating invalidations
 
 * Clean up the range-based flushing APIs
 
 * Revamp the TDP MMU's reaping of Accessed/Dirty bits to clear a single
   A/D bit using a LOCK AND instead of XCHG, and skip all of the "handle
   changed SPTE" overhead associated with writing the entire entry
 
 * Track the number of "tail" entries in a pte_list_desc to avoid having
   to walk (potentially) all descriptors during insertion and deletion,
   which gets quite expensive if the guest is spamming fork()
 
 * Disallow virtualizing legacy LBRs if architectural LBRs are available,
   the two are mutually exclusive in hardware
 
 * Disallow writes to immutable feature MSRs (notably PERF_CAPABILITIES)
   after KVM_RUN, similar to CPUID features
 
 * Overhaul the vmx_pmu_caps selftest to better validate PERF_CAPABILITIES
 
 * Apply PMU filters to emulated events and add test coverage to the
   pmu_event_filter selftest
 
 x86 AMD:
 
 * Add support for virtual NMIs
 
 * Fixes for edge cases related to virtual interrupts
 
 x86 Intel:
 
 * Don't advertise XTILE_CFG in KVM_GET_SUPPORTED_CPUID if XTILE_DATA is
   not being reported due to userspace not opting in via prctl()
 
 * Fix a bug in emulation of ENCLS in compatibility mode
 
 * Allow emulation of NOP and PAUSE for L2
 
 * AMX selftests improvements
 
 * Misc cleanups
 
 MIPS:
 
 * Constify MIPS's internal callbacks (a leftover from the hardware enabling
   rework that landed in 6.3)
 
 Generic:
 
 * Drop unnecessary casts from "void *" throughout kvm_main.c
 
 * Tweak the layout of "struct kvm_mmu_memory_cache" to shrink the struct
   size by 8 bytes on 64-bit kernels by utilizing a padding hole
 
 Documentation:
 
 * Fix goof introduced by the conversion to rST
 -----BEGIN PGP SIGNATURE-----
 
 iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmRNExkUHHBib256aW5p
 QHJlZGhhdC5jb20ACgkQv/vSX3jHroNyjwf+MkzDael9y9AsOZoqhEZ5OsfQYJ32
 Im5ZVYsPRU2K5TuoWql6meIihgclCj1iIU32qYHa2F1WYt2rZ72rJp+HoY8b+TaI
 WvF0pvNtqQyg3iEKUBKPA4xQ6mj7RpQBw86qqiCHmlfNt0zxluEGEPxH8xrWcfhC
 huDQ+NUOdU7fmJ3rqGitCvkUbCuZNkw3aNPR8dhU8RAWrwRzP2hBOmdxIeo81WWY
 XMEpJSijbGpXL9CvM0Jz9nOuMJwZwCCBGxg1vSQq0xTfLySNMxzvWZC2GFaBjucb
 j0UOQ7yE0drIZDVhd3sdNslubXXU6FcSEzacGQb9aigMUon3Tem9SHi7Kw==
 =S2Hq
 -----END PGP SIGNATURE-----

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm

Pull kvm updates from Paolo Bonzini:
 "s390:

   - More phys_to_virt conversions

   - Improvement of AP management for VSIE (nested virtualization)

  ARM64:

   - Numerous fixes for the pathological lock inversion issue that
     plagued KVM/arm64 since... forever.

   - New framework allowing SMCCC-compliant hypercalls to be forwarded
     to userspace, hopefully paving the way for some more features being
     moved to VMMs rather than be implemented in the kernel.

   - Large rework of the timer code to allow a VM-wide offset to be
     applied to both virtual and physical counters as well as a
     per-timer, per-vcpu offset that complements the global one. This
     last part allows the NV timer code to be implemented on top.

   - A small set of fixes to make sure that we don't change anything
     affecting the EL1&0 translation regime just after having having
     taken an exception to EL2 until we have executed a DSB. This
     ensures that speculative walks started in EL1&0 have completed.

   - The usual selftest fixes and improvements.

  x86:

   - Optimize CR0.WP toggling by avoiding an MMU reload when TDP is
     enabled, and by giving the guest control of CR0.WP when EPT is
     enabled on VMX (VMX-only because SVM doesn't support per-bit
     controls)

   - Add CR0/CR4 helpers to query single bits, and clean up related code
     where KVM was interpreting kvm_read_cr4_bits()'s "unsigned long"
     return as a bool

   - Move AMD_PSFD to cpufeatures.h and purge KVM's definition

   - Avoid unnecessary writes+flushes when the guest is only adding new
     PTEs

   - Overhaul .sync_page() and .invlpg() to utilize .sync_page()'s
     optimizations when emulating invalidations

   - Clean up the range-based flushing APIs

   - Revamp the TDP MMU's reaping of Accessed/Dirty bits to clear a
     single A/D bit using a LOCK AND instead of XCHG, and skip all of
     the "handle changed SPTE" overhead associated with writing the
     entire entry

   - Track the number of "tail" entries in a pte_list_desc to avoid
     having to walk (potentially) all descriptors during insertion and
     deletion, which gets quite expensive if the guest is spamming
     fork()

   - Disallow virtualizing legacy LBRs if architectural LBRs are
     available, the two are mutually exclusive in hardware

   - Disallow writes to immutable feature MSRs (notably
     PERF_CAPABILITIES) after KVM_RUN, similar to CPUID features

   - Overhaul the vmx_pmu_caps selftest to better validate
     PERF_CAPABILITIES

   - Apply PMU filters to emulated events and add test coverage to the
     pmu_event_filter selftest

   - AMD SVM:
       - Add support for virtual NMIs
       - Fixes for edge cases related to virtual interrupts

   - Intel AMX:
       - Don't advertise XTILE_CFG in KVM_GET_SUPPORTED_CPUID if
         XTILE_DATA is not being reported due to userspace not opting in
         via prctl()
       - Fix a bug in emulation of ENCLS in compatibility mode
       - Allow emulation of NOP and PAUSE for L2
       - AMX selftests improvements
       - Misc cleanups

  MIPS:

   - Constify MIPS's internal callbacks (a leftover from the hardware
     enabling rework that landed in 6.3)

  Generic:

   - Drop unnecessary casts from "void *" throughout kvm_main.c

   - Tweak the layout of "struct kvm_mmu_memory_cache" to shrink the
     struct size by 8 bytes on 64-bit kernels by utilizing a padding
     hole

  Documentation:

   - Fix goof introduced by the conversion to rST"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (211 commits)
  KVM: s390: pci: fix virtual-physical confusion on module unload/load
  KVM: s390: vsie: clarifications on setting the APCB
  KVM: s390: interrupt: fix virtual-physical confusion for next alert GISA
  KVM: arm64: Have kvm_psci_vcpu_on() use WRITE_ONCE() to update mp_state
  KVM: arm64: Acquire mp_state_lock in kvm_arch_vcpu_ioctl_vcpu_init()
  KVM: selftests: Test the PMU event "Instructions retired"
  KVM: selftests: Copy full counter values from guest in PMU event filter test
  KVM: selftests: Use error codes to signal errors in PMU event filter test
  KVM: selftests: Print detailed info in PMU event filter asserts
  KVM: selftests: Add helpers for PMC asserts in PMU event filter test
  KVM: selftests: Add a common helper for the PMU event filter guest code
  KVM: selftests: Fix spelling mistake "perrmited" -> "permitted"
  KVM: arm64: vhe: Drop extra isb() on guest exit
  KVM: arm64: vhe: Synchronise with page table walker on MMU update
  KVM: arm64: pkvm: Document the side effects of kvm_flush_dcache_to_poc()
  KVM: arm64: nvhe: Synchronise with page table walker on TLBI
  KVM: arm64: Handle 32bit CNTPCTSS traps
  KVM: arm64: nvhe: Synchronise with page table walker on vcpu run
  KVM: arm64: vgic: Don't acquire its_lock before config_lock
  KVM: selftests: Add test to verify KVM's supported XCR0
  ...
2023-05-01 12:06:20 -07:00
Sean Christopherson
9ed3bf4112 KVM: x86/mmu: Move filling of Hyper-V's TLB range struct into Hyper-V code
Refactor Hyper-V's range-based TLB flushing API to take a gfn+nr_pages
pair instead of a struct, and bury said struct in Hyper-V specific code.

Passing along two params generates much better code for the common case
where KVM is _not_ running on Hyper-V, as forwarding the flush on to
Hyper-V's hv_flush_remote_tlbs_range() from kvm_flush_remote_tlbs_range()
becomes a tail call.

Cc: David Matlack <dmatlack@google.com>
Reviewed-by: David Matlack <dmatlack@google.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Link: https://lore.kernel.org/r/20230405003133.419177-3-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
2023-04-10 15:17:29 -07:00
Sean Christopherson
8a1300ff95 KVM: x86: Rename Hyper-V remote TLB hooks to match established scheme
Rename the Hyper-V hooks for TLB flushing to match the naming scheme used
by all the other TLB flushing hooks, e.g. in kvm_x86_ops, vendor code,
arch hooks from common code, etc.

Reviewed-by: David Matlack <dmatlack@google.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Link: https://lore.kernel.org/r/20230405003133.419177-2-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
2023-04-10 15:17:29 -07:00
Jeremi Piotrowski
e5c972c1fa KVM: SVM: Flush Hyper-V TLB when required
The Hyper-V "EnlightenedNptTlb" enlightenment is always enabled when KVM
is running on top of Hyper-V and Hyper-V exposes support for it (which
is always). On AMD CPUs this enlightenment results in ASID invalidations
not flushing TLB entries derived from the NPT. To force the underlying
(L0) hypervisor to rebuild its shadow page tables, an explicit hypercall
is needed.

The original KVM implementation of Hyper-V's "EnlightenedNptTlb" on SVM
only added remote TLB flush hooks. This worked out fine for a while, as
sufficient remote TLB flushes where being issued in KVM to mask the
problem. Since v5.17, changes in the TDP code reduced the number of
flushes and the out-of-sync TLB prevents guests from booting
successfully.

Split svm_flush_tlb_current() into separate callbacks for the 3 cases
(guest/all/current), and issue the required Hyper-V hypercall when a
Hyper-V TLB flush is needed. The most important case where the TLB flush
was missing is when loading a new PGD, which is followed by what is now
svm_flush_tlb_current().

Cc: stable@vger.kernel.org # v5.17+
Fixes: 1e0c7d4075 ("KVM: SVM: hyper-v: Remote TLB flush for SVM")
Link: https://lore.kernel.org/lkml/43980946-7bbf-dcef-7e40-af904c456250@linux.microsoft.com/
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Jeremi Piotrowski <jpiotrowski@linux.microsoft.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20230324145233.4585-1-jpiotrowski@linux.microsoft.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2023-03-27 10:10:26 -04:00
Sean Christopherson
3d4421f8f2 KVM: x86: Uninline and export hv_track_root_tdp()
Uninline and export Hyper-V's hv_track_root_tdp(), which is (somewhat
indirectly) the last remaining reference to kvm_x86_ops from vendor
modules, i.e. will allow unexporting kvm_x86_ops.  Reloading the TDP PGD
isn't the fastest of paths, hv_track_root_tdp() isn't exactly tiny, and
disallowing vendor code from accessing kvm_x86_ops provides nice-to-have
encapsulation of common x86 code (and of Hyper-V code for that matter).

No functional change intended.

Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220128005208.4008533-10-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-02-10 13:47:19 -05:00
Vineeth Pillai
3c86c0d3db KVM: x86: hyper-v: Move the remote TLB flush logic out of vmx
Currently the remote TLB flush logic is specific to VMX.
Move it to a common place so that SVM can use it as well.

Signed-off-by: Vineeth Pillai <viremana@linux.microsoft.com>
Message-Id: <4f4e4ca19778437dae502f44363a38e99e3ef5d1.1622730232.git.viremana@linux.microsoft.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-06-17 13:09:36 -04:00