I found that the read code might send multiple requests using the same
nfs_pgio_header, but nfs4_proc_read_setup() is only called once. This is
how we ended up occasionally double-freeing the scratch buffer, but also
means we set a NULL pointer but non-zero length to the xdr scratch
buffer. This results in an oops the first time decoding needs to copy
something to scratch, which frequently happens when decoding READ_PLUS
hole segments.
I fix this by moving scratch handling into the pageio read code. I
provide a function to allocate scratch space for decoding read replies,
and free the scratch buffer when the nfs_pgio_header is freed.
Fixes: fbd2a05f29 (NFSv4.2: Rework scratch handling for READ_PLUS)
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
I bump the decode_read_plus_maxsz to account for hole segments, but I
need to subtract out this increase when calling
rpc_prepare_reply_pages() so the common case of single data segment
replies can be directly placed into the xdr pages without needing to be
shifted around.
Reported-by: Chuck Lever <chuck.lever@oracle.com>
Fixes: d3b00a802c ("NFS: Replace the READ_PLUS decoding code")
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Smatch reports:
fs/nfs/nfs42xdr.c:1131 decode_read_plus() warn: missing error code? 'status'
Which Dan suggests to fix by doing a hardcoded "return 0" from the
"if (segments == 0)" check.
Additionally, smatch reports that the "status = -EIO" assignment is not
used. This patch addresses both these issues.
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <error27@gmail.com>
Closes: https://lore.kernel.org/r/202305222209.6l5VM2lL-lkp@intel.com/
Fixes: d3b00a802c ("NFS: Replace the READ_PLUS decoding code")
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Otherwise, `stat` will report a stale value to users.
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Fold them into the other NFS v4.2 operations in the right spots and
adjust spacing to keep the same style.
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
I add commends above each function to match the style of the other
nfs4_xdr_dec_*() functions. I also remove the unnecessary #ifdef
CONFIG_NFS_V4_2 that was added around this code, since we are already in
a v4.2-only file.
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
They should be in the nfs4_xdr_enc_*() section, and not at the bottom of
the file.
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Move them out of the encode_*() section and into the decode_*() section
where it belongs.
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Move the function to be with the other encode_*() functions, instead of
in the middle of the nfs4_xdr_enc_*() section.
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Instead of using a tiny, static scratch buffer, we should use a kmalloc()-ed
buffer that is allocated when checking for read plus usage. This lets us
use the buffer before decoding any part of the READ_PLUS operation
instead of setting it right before segment decoding, meaning it should
be a little more robust.
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Assume that the first segment will be a DATA segment, and place the data
directly into the xdr pages so it doesn't need to be shifted.
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
The scratch_buf array is 16 bytes, but I was passing 32 to the
xdr_set_scratch_buffer() function. Fix this by using sizeof(), which is
what I probably should have been doing this whole time.
Fixes: d3b00a802c ("NFS: Replace the READ_PLUS decoding code")
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
We can translate this into an empty response list instead of passing an
error up to userspace.
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
We now take a 2-step process that allows us to place data and hole
segments directly at their final position in the xdr_stream without
needing to do a bunch of redundant copies to expand holes. Due to the
variable lengths of each segment, the xdr metadata might cross page
boundaries which I account for by setting a small scratch buffer so
xdr_inline_decode() won't fail.
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
The failure to retrieve post-op attributes has no bearing on whether or
not the clone operation itself was successful. We must therefore ignore
the return value of decode_getfattr() when looking at the success or
failure of nfs4_xdr_dec_clone().
Fixes: 36022770de ("nfs42: add CLONE xdr functions")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Highlights include:
Features:
- NFSv3: Add emulation of lookupp() to improve open_by_filehandle()
support.
- A series of patches to improve readdir performance, particularly with
large directories.
- Basic support for using NFS/RDMA with the pNFS files and flexfiles
drivers.
- Micro-optimisations for RDMA.
- RDMA tracing improvements.
Bugfixes:
- Fix a long standing bug with xs_read_xdr_buf() when receiving partial
pages (Dan Aloni).
- Various fixes for getxattr and listxattr, when used over non-TCP
transports.
- Fixes for containerised NFS from Sargun Dhillon.
- switch nfsiod to be an UNBOUND workqueue (Neil Brown).
- READDIR should not ask for security label information if there is no
LSM policy. (Olga Kornievskaia)
- Avoid using interval-based rebinding with TCP in lockd (Calum Mackay).
- A series of RPC and NFS layer fixes to support the NFSv4.2 READ_PLUS code.
- A couple of fixes for pnfs/flexfiles read failover
Cleanups:
- Various cleanups for the SUNRPC xdr code in conjunction with the
READ_PLUS fixes.
-----BEGIN PGP SIGNATURE-----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=IKWG
-----END PGP SIGNATURE-----
Merge tag 'nfs-for-5.11-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs
Pull NFS client updates from Trond Myklebust:
"Highlights include:
Features:
- NFSv3: Add emulation of lookupp() to improve open_by_filehandle()
support
- A series of patches to improve readdir performance, particularly
with large directories
- Basic support for using NFS/RDMA with the pNFS files and flexfiles
drivers
- Micro-optimisations for RDMA
- RDMA tracing improvements
Bugfixes:
- Fix a long standing bug with xs_read_xdr_buf() when receiving
partial pages (Dan Aloni)
- Various fixes for getxattr and listxattr, when used over non-TCP
transports
- Fixes for containerised NFS from Sargun Dhillon
- switch nfsiod to be an UNBOUND workqueue (Neil Brown)
- READDIR should not ask for security label information if there is
no LSM policy (Olga Kornievskaia)
- Avoid using interval-based rebinding with TCP in lockd (Calum
Mackay)
- A series of RPC and NFS layer fixes to support the NFSv4.2
READ_PLUS code
- A couple of fixes for pnfs/flexfiles read failover
Cleanups:
- Various cleanups for the SUNRPC xdr code in conjunction with the
READ_PLUS fixes"
* tag 'nfs-for-5.11-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: (90 commits)
NFS/pNFS: Fix a typo in ff_layout_resend_pnfs_read()
pNFS/flexfiles: Avoid spurious layout returns in ff_layout_choose_ds_for_read
NFSv4/pnfs: Add tracing for the deviceid cache
fs/lockd: convert comma to semicolon
NFSv4.2: fix error return on memory allocation failure
NFSv4.2/pnfs: Don't use READ_PLUS with pNFS yet
NFSv4.2: Deal with potential READ_PLUS data extent buffer overflow
NFSv4.2: Don't error when exiting early on a READ_PLUS buffer overflow
NFSv4.2: Handle hole lengths that exceed the READ_PLUS read buffer
NFSv4.2: decode_read_plus_hole() needs to check the extent offset
NFSv4.2: decode_read_plus_data() must skip padding after data segment
NFSv4.2: Ensure we always reset the result->count in decode_read_plus()
SUNRPC: When expanding the buffer, we may need grow the sparse pages
SUNRPC: Cleanup - constify a number of xdr_buf helpers
SUNRPC: Clean up open coded setting of the xdr_stream 'nwords' field
SUNRPC: _copy_to/from_pages() now check for zero length
SUNRPC: Cleanup xdr_shrink_bufhead()
SUNRPC: Fix xdr_expand_hole()
SUNRPC: Fixes for xdr_align_data()
SUNRPC: _shift_data_left/right_pages should check the shift length
...
- Improve support for re-exporting NFS mounts
- Replace NFSv4 XDR decoding C macros with xdr_stream helpers
- Support for multiple RPC/RDMA chunks per RPC transaction
-----BEGIN PGP SIGNATURE-----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=1uP3
-----END PGP SIGNATURE-----
Merge tag 'nfsd-5.11' of git://git.linux-nfs.org/projects/cel/cel-2.6
Pull nfsd updates from Chuck Lever:
"Several substantial changes this time around:
- Previously, exporting an NFS mount via NFSD was considered to be an
unsupported feature. With v5.11, the community has attempted to
make re-exporting a first-class feature of NFSD.
This would enable the Linux in-kernel NFS server to be used as an
intermediate cache for a remotely-located primary NFS server, for
example, even with other NFS server implementations, like a NetApp
filer, as the primary.
- A short series of patches brings support for multiple RPC/RDMA data
chunks per RPC transaction to the Linux NFS server's RPC/RDMA
transport implementation.
This is a part of the RPC/RDMA spec that the other premiere
NFS/RDMA implementation (Solaris) has had for a very long time, and
completes the implementation of RPC/RDMA version 1 in the Linux
kernel's NFS server.
- Long ago, NFSv4 support was introduced to NFSD using a series of C
macros that hid dprintk's and goto's. Over time, the kernel's XDR
implementation has been greatly improved, but these C macros have
remained and become fallow. A series of patches in this pull
request completely replaces those macros with the use of current
kernel XDR infrastructure. Benefits include:
- More robust input sanitization in NFSD's NFSv4 XDR decoders.
- Make it easier to use common kernel library functions that use
XDR stream APIs (for example, GSS-API).
- Align the structure of the source code with the RFCs so it is
easier to learn, verify, and maintain our XDR implementation.
- Removal of more than a hundred hidden dprintk() call sites.
- Removal of some explicit manipulation of pages to help make the
eventual transition to xdr->bvec smoother.
- On top of several related fixes in 5.10-rc, there are a few more
fixes to get the Linux NFSD implementation of NFSv4.2 inter-server
copy up to speed.
And as usual, there is a pinch of seasoning in the form of a
collection of unrelated minor bug fixes and clean-ups.
Many thanks to all who contributed this time around!"
* tag 'nfsd-5.11' of git://git.linux-nfs.org/projects/cel/cel-2.6: (131 commits)
nfsd: Record NFSv4 pre/post-op attributes as non-atomic
nfsd: Set PF_LOCAL_THROTTLE on local filesystems only
nfsd: Fix up nfsd to ensure that timeout errors don't result in ESTALE
exportfs: Add a function to return the raw output from fh_to_dentry()
nfsd: close cached files prior to a REMOVE or RENAME that would replace target
nfsd: allow filesystems to opt out of subtree checking
nfsd: add a new EXPORT_OP_NOWCC flag to struct export_operations
Revert "nfsd4: support change_attr_type attribute"
nfsd4: don't query change attribute in v2/v3 case
nfsd: minor nfsd4_change_attribute cleanup
nfsd: simplify nfsd4_change_info
nfsd: only call inode_query_iversion in the I_VERSION case
nfs_common: need lock during iterate through the list
NFSD: Fix 5 seconds delay when doing inter server copy
NFSD: Fix sparse warning in nfs4proc.c
SUNRPC: Remove XDRBUF_SPARSE_PAGES flag in gss_proxy upcall
sunrpc: clean-up cache downcall
nfsd: Fix message level for normal termination
NFSD: Remove macros that are no longer used
NFSD: Replace READ* macros in nfsd4_decode_compound()
...
If the server returns more data than we have buffer space for, then
we need to truncate and exit early.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Expanding the READ_PLUS extents can cause the read buffer to overflow.
If it does, then don't error, but just exit early.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
If a hole extends beyond the READ_PLUS read buffer, then we want to fill
just the remaining buffer with zeros. Also ignore eof...
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
The server is allowed to return a hole extent with an offset that starts
before the offset supplied in the READ_PLUS argument. Ensure that we
support that case too.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
XDRBUF_SPARSE_PAGES can cause problems for the RDMA transport,
and it's easy enough to allocate enough pages for the request
up front, so do that.
Also, since we've allocated the pages anyway, use the full
page aligned length for the receive buffer. This will allow
caching of valid replies that are too large for the caller,
but that still fit in the allocated pages.
Signed-off-by: Frank van der Linden <fllinden@amazon.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
By switching to an XFS-backed export, I am able to reproduce the
ibcomp worker crash on my client with xfstests generic/013.
For the failing LISTXATTRS operation, xdr_inline_pages() is called
with page_len=12 and buflen=128.
- When ->send_request() is called, rpcrdma_marshal_req() does not
set up a Reply chunk because buflen is smaller than the inline
threshold. Thus rpcrdma_convert_iovs() does not get invoked at
all and the transport's XDRBUF_SPARSE_PAGES logic is not invoked
on the receive buffer.
- During reply processing, rpcrdma_inline_fixup() tries to copy
received data into rq_rcv_buf->pages because page_len is positive.
But there are no receive pages because rpcrdma_marshal_req() never
allocated them.
The result is that the ibcomp worker faults and dies. Sometimes that
causes a visible crash, and sometimes it results in a transport hang
without other symptoms.
RPC/RDMA's XDRBUF_SPARSE_PAGES support is not entirely correct, and
should eventually be fixed or replaced. However, my preference is
that upper-layer operations should explicitly allocate their receive
buffers (using GFP_KERNEL) when possible, rather than relying on
XDRBUF_SPARSE_PAGES.
Reported-by: Olga kornievskaia <kolga@netapp.com>
Suggested-by: Olga kornievskaia <kolga@netapp.com>
Fixes: c10a75145f ("NFSv4.2: add the extended attribute proc functions.")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Olga kornievskaia <kolga@netapp.com>
Reviewed-by: Frank van der Linden <fllinden@amazon.com>
Tested-by: Olga kornievskaia <kolga@netapp.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Ensure that both getxattr and listxattr page array are correctly
aligned, and that getxattr correctly accounts for the page padding word.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
By switching to an XFS-backed export, I am able to reproduce the
ibcomp worker crash on my client with xfstests generic/013.
For the failing LISTXATTRS operation, xdr_inline_pages() is called
with page_len=12 and buflen=128.
- When ->send_request() is called, rpcrdma_marshal_req() does not
set up a Reply chunk because buflen is smaller than the inline
threshold. Thus rpcrdma_convert_iovs() does not get invoked at
all and the transport's XDRBUF_SPARSE_PAGES logic is not invoked
on the receive buffer.
- During reply processing, rpcrdma_inline_fixup() tries to copy
received data into rq_rcv_buf->pages because page_len is positive.
But there are no receive pages because rpcrdma_marshal_req() never
allocated them.
The result is that the ibcomp worker faults and dies. Sometimes that
causes a visible crash, and sometimes it results in a transport hang
without other symptoms.
RPC/RDMA's XDRBUF_SPARSE_PAGES support is not entirely correct, and
should eventually be fixed or replaced. However, my preference is
that upper-layer operations should explicitly allocate their receive
buffers (using GFP_KERNEL) when possible, rather than relying on
XDRBUF_SPARSE_PAGES.
Reported-by: Olga kornievskaia <kolga@netapp.com>
Suggested-by: Olga kornievskaia <kolga@netapp.com>
Fixes: c10a75145f ("NFSv4.2: add the extended attribute proc functions.")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Olga kornievskaia <kolga@netapp.com>
Reviewed-by: Frank van der Linden <fllinden@amazon.com>
Tested-by: Olga kornievskaia <kolga@netapp.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Certain NFSv4.2/RDMA tests fail with v5.9-rc1.
rpcrdma_convert_kvec() runs off the end of the rl_segments array
because rq_rcv_buf.tail[0].iov_len holds a very large positive
value. The resultant kernel memory corruption is enough to crash
the client system.
Callers of rpc_prepare_reply_pages() must reserve an extra XDR_UNIT
in the maximum decode size for a possible XDR pad of the contents
of the xdr_buf's pages. That guarantees the allocated receive buffer
will be large enough to accommodate the usual contents plus that XDR
pad word.
encode_op_hdr() cannot add that extra word. If it does,
xdr_inline_pages() underruns the length of the tail iovec.
Fixes: 3e1f02123f ("NFSv4.2: add client side XDR handling for extended attributes")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Decode multiple hole and data segments sent by the server, placing
everything directly where they need to go in the xdr pages.
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
We keep things simple for now by only decoding a single hole or data
segment returned by the server, even if they returned more to us.
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
This patch adds client support for decoding a single NFS4_CONTENT_DATA
segment returned by the server. This is the simplest implementation
possible, since it does not account for any hole segments in the reply.
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Define the argument and response structures that will be used for
RFC 8276 extended attribute RPC calls, and implement the necessary
functions to encode/decode the extended attribute operations.
Signed-off-by: Frank van der Linden <fllinden@amazon.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Set limits for extended attributes (attribute value size and listxattr
buffer size), based on the fs-independent limits (XATTR_*_MAX).
Define the maximum XDR sizes for the RFC 8276 XATTR operations.
In the case of operations that carry a larger payload (SETXATTR,
GETXATTR, LISTXATTR), these exclude that payload, which is added
as separate pages, like other operations do.
Define, much like for read and write operations, the maximum overhead
sizes for get/set/listxattr, and use them to limit the maximum payload
size for those operations, in combination with the channel attributes.
Signed-off-by: Frank van der Linden <fllinden@amazon.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Support only one source server address: the same address that
the client and source server use.
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Try using the delegation stateid, then the open stateid.
Only NL4_NETATTR, No support for NL4_NAME and NL4_URL.
Allow only one source server address to be returned for now.
To distinguish between same server copy offload ("intra") and
a copy between different server ("inter"), do a check of server
owner identity and also make sure server is capable of doing
a copy offload.
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
These really should have been there from the beginning, but we never
noticed because there was enough slack in the RPC request for the extra
bytes. Chuck's recent patch to use au_cslack and au_rslack to compute
buffer size shrunk the buffer enough that this was now a problem for
SEEK operations on my test client.
Fixes: f4ac1674f5 ("nfs: Add ALLOCATE support")
Fixes: 2e72448b07 ("NFS: Add COPY nfs operation")
Fixes: cb95deea0b ("NFS OFFLOAD_CANCEL xdr")
Fixes: 624bd5b7b6 ("nfs: Add DEALLOCATE support")
Fixes: 1c6dcbe5ce ("NFS: Implement SEEK")
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
This issue is now captured by a trace point in the RPC client.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Change xdr to always send COPY asynchronously.
Keep the list copies send in a list under a server structure.
Once copy is sent, it waits on a completion structure that will
be signalled by the callback thread that receives CB_OFFLOAD.
If CB_OFFLOAD returned an error and even if it returned partial
bytes, ignore them (as we can't commit without a verifier to
match) and return an error.
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
If server returns async reply, it must include a callback stateid,
wr_callback_id in the write_response4.
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Declare the p_decode callbacks with the proper prototype instead of
casting to kxdrdproc_t and losing all type safety.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Acked-by: Trond Myklebust <trond.myklebust@primarydata.com>
Declare the p_encode callbacks with the proper prototype instead of
casting to kxdreproc_t and losing all type safety.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Acked-by: Trond Myklebust <trond.myklebust@primarydata.com>
Instead of messing with the commit path which has been causing issues,
add a COMMIT op after the COPY and ask for stable copies in the first
space.
It saves a round trip, since after the COPY, the client sends a COMMIT
anyway.
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Replace it with a test for whether or not the sent a stateid in violation
of what we asked for.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
This adds the copy_range file_ops function pointer used by the
sys_copy_range() function call. This patch only implements sync copies,
so if an async copy happens we decode the stateid and ignore it.
Signed-off-by: Anna Schumaker <bjschuma@netapp.com>
