Patch series "nilfs2 lockdep warning fixes".
The first two are to resolve the lockdep warning issue, and the last one
is the accompanying cleanup and low priority.
Based on your comment, this series solves the issue by separating inode
object as needed. Since I was worried about the impact of the object
composition changes, I tested the series carefully not to cause
regressions especially for delicate functions such like disk space
reclamation and snapshots.
This patch (of 3):
If CONFIG_LOCKDEP is enabled, nilfs2 hits lockdep warnings at
inode_to_wb() during page/folio operations for btree nodes:
WARNING: CPU: 0 PID: 6575 at include/linux/backing-dev.h:269 inode_to_wb include/linux/backing-dev.h:269 [inline]
WARNING: CPU: 0 PID: 6575 at include/linux/backing-dev.h:269 folio_account_dirtied mm/page-writeback.c:2460 [inline]
WARNING: CPU: 0 PID: 6575 at include/linux/backing-dev.h:269 __folio_mark_dirty+0xa7c/0xe30 mm/page-writeback.c:2509
Modules linked in:
...
RIP: 0010:inode_to_wb include/linux/backing-dev.h:269 [inline]
RIP: 0010:folio_account_dirtied mm/page-writeback.c:2460 [inline]
RIP: 0010:__folio_mark_dirty+0xa7c/0xe30 mm/page-writeback.c:2509
...
Call Trace:
__set_page_dirty include/linux/pagemap.h:834 [inline]
mark_buffer_dirty+0x4e6/0x650 fs/buffer.c:1145
nilfs_btree_propagate_p fs/nilfs2/btree.c:1889 [inline]
nilfs_btree_propagate+0x4ae/0xea0 fs/nilfs2/btree.c:2085
nilfs_bmap_propagate+0x73/0x170 fs/nilfs2/bmap.c:337
nilfs_collect_dat_data+0x45/0xd0 fs/nilfs2/segment.c:625
nilfs_segctor_apply_buffers+0x14a/0x470 fs/nilfs2/segment.c:1009
nilfs_segctor_scan_file+0x47a/0x700 fs/nilfs2/segment.c:1048
nilfs_segctor_collect_blocks fs/nilfs2/segment.c:1224 [inline]
nilfs_segctor_collect fs/nilfs2/segment.c:1494 [inline]
nilfs_segctor_do_construct+0x14f3/0x6c60 fs/nilfs2/segment.c:2036
nilfs_segctor_construct+0x7a7/0xb30 fs/nilfs2/segment.c:2372
nilfs_segctor_thread_construct fs/nilfs2/segment.c:2480 [inline]
nilfs_segctor_thread+0x3c3/0xf90 fs/nilfs2/segment.c:2563
kthread+0x405/0x4f0 kernel/kthread.c:327
ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:295
This is because nilfs2 uses two page caches for each inode and
inode->i_mapping never points to one of them, the btree node cache.
This causes inode_to_wb(inode) to refer to a different page cache than
the caller page/folio operations such like __folio_start_writeback(),
__folio_end_writeback(), or __folio_mark_dirty() acquired the lock.
This patch resolves the issue by allocating and using an additional
inode to hold the page cache of btree nodes. The inode is attached
one-to-one to the traditional nilfs2 inode if it requires a block
mapping with b-tree. This setup change is in memory only and does not
affect the disk format.
Link: https://lkml.kernel.org/r/1647867427-30498-1-git-send-email-konishi.ryusuke@gmail.com
Link: https://lkml.kernel.org/r/1647867427-30498-2-git-send-email-konishi.ryusuke@gmail.com
Link: https://lore.kernel.org/r/YXrYvIo8YRnAOJCj@casper.infradead.org
Link: https://lore.kernel.org/r/9a20b33d-b38f-b4a2-4742-c1eb5b8e4d6c@redhat.com
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Reported-by: syzbot+0d5b462a6f07447991b3@syzkaller.appspotmail.com
Reported-by: syzbot+34ef28bb2aeb28724aa0@syzkaller.appspotmail.com
Reported-by: Hao Sun <sunhao.th@gmail.com>
Reported-by: David Hildenbrand <david@redhat.com>
Tested-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Remove filenames that are not particularly useful in file comments, and
suppress checkpatch warnings
WARNING: It's generally not useful to have the filename in the file
Link: https://lkml.kernel.org/r/1635151862-11547-3-git-send-email-konishi.ryusuke@gmail.com
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Cc: Qing Wang <wangqing@vivo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Remove the verbose license text from NILFS2 files and replace them with
SPDX tags. This does not change the license of any of the code.
Link: http://lkml.kernel.org/r/1535624528-5982-1-git-send-email-konishi.ryusuke@lab.ntt.co.jp
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This has submit_bh users pass in the operation and flags separately,
so submit_bh_wbc can setup the bio op and bi_rw flags on the bio that
is submitted.
Signed-off-by: Mike Christie <mchristi@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
E-mail addresses of osrg.net domain are no longer available. This
removes them from authorship notices and prevents reporters from being
confused.
Link: http://lkml.kernel.org/r/1461935747-10380-5-git-send-email-konishi.ryusuke@lab.ntt.co.jp
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This removes the extra paragraph which mentions FSF address in GPL
notices from source code of nilfs2 and avoids the checkpatch.pl error
related to it.
Link: http://lkml.kernel.org/r/1461935747-10380-4-git-send-email-konishi.ryusuke@lab.ntt.co.jp
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This replaces nilfs_mdt_mark_buffer_dirty and nilfs_btnode_mark_dirty
macros with mark_buffer_dirty and gets rid of nilfs_mark_buffer_dirty,
an own mark buffer dirty function.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
In the current nilfs, page cache for btree nodes and meta data files
do not set a valid back pointer to the host inode in mapping->host.
This will change it so that every address space in nilfs uses
mapping->host to hold its host inode.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Michael Leun reported that running parallel opens on a fuse filesystem
can trigger a "kernel BUG at mm/truncate.c:475"
Gurudas Pai reported the same bug on NFS.
The reason is, unmap_mapping_range() is not prepared for more than
one concurrent invocation per inode. For example:
thread1: going through a big range, stops in the middle of a vma and
stores the restart address in vm_truncate_count.
thread2: comes in with a small (e.g. single page) unmap request on
the same vma, somewhere before restart_address, finds that the
vma was already unmapped up to the restart address and happily
returns without doing anything.
Another scenario would be two big unmap requests, both having to
restart the unmapping and each one setting vm_truncate_count to its
own value. This could go on forever without any of them being able to
finish.
Truncate and hole punching already serialize with i_mutex. Other
callers of unmap_mapping_range() do not, and it's difficult to get
i_mutex protection for all callers. In particular ->d_revalidate(),
which calls invalidate_inode_pages2_range() in fuse, may be called
with or without i_mutex.
This patch adds a new mutex to 'struct address_space' to prevent
running multiple concurrent unmap_mapping_range() on the same mapping.
[ We'll hopefully get rid of all this with the upcoming mm
preemptibility series by Peter Zijlstra, the "mm: Remove i_mmap_mutex
lockbreak" patch in particular. But that is for 2.6.39 ]
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Reported-by: Michael Leun <lkml20101129@newton.leun.net>
Reported-by: Gurudas Pai <gurudas.pai@oracle.com>
Tested-by: Gurudas Pai <gurudas.pai@oracle.com>
Acked-by: Hugh Dickins <hughd@google.com>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This adds mode argument to nilfs_btnode_submit_block() function and
allows it to issue a read-ahead request.
An optional submit_ptr argument is also added to store the actual
block address for which bio is sent. submit_ptr is used for a series
of read-ahead requests, and helps to decide if each requested block is
continous to the previous one on disk.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
This removes the obsolete nilfs_btnode_get() function and makes
nilfs_btree_get_block() directly call nilfs_btnode_submit_block().
This expansion will provide better opportunity for code optimization.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
This removes the obsolete argument from nilfs_btnode_submit_block().
This will complete separating a create function of btree node.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Adds a separate routine for creating a btree node block. This is a
preparation to reduce the depth of function calls during submitting
btree node buffer.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Previously, default_backing_dev_info was used for the mapping of btree
node caches. This uses device dependent backing_dev_info to allow
detailed control of the device for the btree node pages.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
