[ Upstream commit 8e4e5cdf2f ]
Factor out a new common helper ext4_map_query_blocks() from the
ext4_da_map_blocks(), it query and return the extent map status on the
inode's extent path, no logic changes.
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Link: https://patch.msgid.link/20240517124005.347221-2-yi.zhang@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Stable-dep-of: 0ea6560abb ("ext4: check the extent status again before inserting delalloc block")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit acf795dc16 ]
ext4_da_map_blocks() only hold i_data_sem in shared mode and i_rwsem
when inserting delalloc extents, it could be raced by another querying
path of ext4_map_blocks() without i_rwsem, .e.g buffered read path.
Suppose we buffered read a file containing just a hole, and without any
cached extents tree, then it is raced by another delayed buffered write
to the same area or the near area belongs to the same hole, and the new
delalloc extent could be overwritten to a hole extent.
pread() pwrite()
filemap_read_folio()
ext4_mpage_readpages()
ext4_map_blocks()
down_read(i_data_sem)
ext4_ext_determine_hole()
//find hole
ext4_ext_put_gap_in_cache()
ext4_es_find_extent_range()
//no delalloc extent
ext4_da_map_blocks()
down_read(i_data_sem)
ext4_insert_delayed_block()
//insert delalloc extent
ext4_es_insert_extent()
//overwrite delalloc extent to hole
This race could lead to inconsistent delalloc extents tree and
incorrect reserved space counter. Fix this by converting to hold
i_data_sem in exclusive mode when adding a new delalloc extent in
ext4_da_map_blocks().
Cc: stable@vger.kernel.org
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Suggested-by: Jan Kara <jack@suse.cz>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20240127015825.1608160-3-yi.zhang@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Stable-dep-of: 0ea6560abb ("ext4: check the extent status again before inserting delalloc block")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3fcc2b887a ]
Refactor and cleanup ext4_da_map_blocks(), reduce some unnecessary
parameters and branches, no logic changes.
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20240127015825.1608160-2-yi.zhang@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Stable-dep-of: 0ea6560abb ("ext4: check the extent status again before inserting delalloc block")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6c120399cd ]
Now ext4_es_insert_extent() never return error, so make it return void.
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230424033846.4732-12-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Stable-dep-of: 0ea6560abb ("ext4: check the extent status again before inserting delalloc block")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 98ca62ba9e ]
Always initialize i_uid/i_gid inside the sysfs core so set_ownership()
can safely skip setting them.
Commit 5ec27ec735 ("fs/proc/proc_sysctl.c: fix the default values of
i_uid/i_gid on /proc/sys inodes.") added defaults for i_uid/i_gid when
set_ownership() was not implemented. It also missed adjusting
net_ctl_set_ownership() to use the same default values in case the
computation of a better value failed.
Fixes: 5ec27ec735 ("fs/proc/proc_sysctl.c: fix the default values of i_uid/i_gid on /proc/sys inodes.")
Cc: stable@vger.kernel.org
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Joel Granados <j.granados@samsung.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 520713a93d ]
Remove the 'table' argument from set_ownership as it is never used. This
change is a step towards putting "struct ctl_table" into .rodata and
eventually having sysctl core only use "const struct ctl_table".
The patch was created with the following coccinelle script:
@@
identifier func, head, table, uid, gid;
@@
void func(
struct ctl_table_header *head,
- struct ctl_table *table,
kuid_t *uid, kgid_t *gid)
{ ... }
No additional occurrences of 'set_ownership' were found after doing a
tree-wide search.
Reviewed-by: Joel Granados <j.granados@samsung.com>
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Joel Granados <j.granados@samsung.com>
Stable-dep-of: 98ca62ba9e ("sysctl: always initialize i_uid/i_gid")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f9436a5d04 ]
All parameters of posix messages queues (queues_max/msg_max/msgsize_max)
end up being limited by RLIMIT_MSGQUEUE. The code in mqueue_get_inode is
where that limiting happens.
The RLIMIT_MSGQUEUE is bound to the user namespace and is counted
hierarchically.
We can allow root in the user namespace to modify the posix messages
queues parameters.
Link: https://lkml.kernel.org/r/6ad67f23d1459a4f4339f74aa73bac0ecf3995e1.1705333426.git.legion@kernel.org
Signed-off-by: Alexey Gladkov <legion@kernel.org>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Link: https://lkml.kernel.org/r/7eb21211c8622e91d226e63416b1b93c079f60ee.1663756794.git.legion@kernel.org
Cc: Christian Brauner <brauner@kernel.org>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Joel Granados <joel.granados@gmail.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: Manfred Spraul <manfred@colorfullife.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Stable-dep-of: 98ca62ba9e ("sysctl: always initialize i_uid/i_gid")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 50ec499b9a ]
Patch series "Allow to change ipc/mq sysctls inside ipc namespace", v3.
Right now ipc and mq limits count as per ipc namespace, but only real root
can change them. By default, the current values of these limits are such
that it can only be reduced. Since only root can change the values, it is
impossible to reduce these limits in the rootless container.
We can allow limit changes within ipc namespace because mq parameters are
limited by RLIMIT_MSGQUEUE and ipc parameters are not limited to anything
other than cgroups.
This patch (of 3):
Rootless containers are not allowed to modify kernel IPC parameters.
All default limits are set to such high values that in fact there are no
limits at all. All limits are not inherited and are initialized to
default values when a new ipc_namespace is created.
For new ipc_namespace:
size_t ipc_ns.shm_ctlmax = SHMMAX; // (ULONG_MAX - (1UL << 24))
size_t ipc_ns.shm_ctlall = SHMALL; // (ULONG_MAX - (1UL << 24))
int ipc_ns.shm_ctlmni = IPCMNI; // (1 << 15)
int ipc_ns.shm_rmid_forced = 0;
unsigned int ipc_ns.msg_ctlmax = MSGMAX; // 8192
unsigned int ipc_ns.msg_ctlmni = MSGMNI; // 32000
unsigned int ipc_ns.msg_ctlmnb = MSGMNB; // 16384
The shm_tot (total amount of shared pages) has also ceased to be global,
it is located in ipc_namespace and is not inherited from anywhere.
In such conditions, it cannot be said that these limits limit anything.
The real limiter for them is cgroups.
If we allow rootless containers to change these parameters, then it can
only be reduced.
Link: https://lkml.kernel.org/r/cover.1705333426.git.legion@kernel.org
Link: https://lkml.kernel.org/r/d2f4603305cbfed58a24755aa61d027314b73a45.1705333426.git.legion@kernel.org
Signed-off-by: Alexey Gladkov <legion@kernel.org>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Link: https://lkml.kernel.org/r/e2d84d3ec0172cfff759e6065da84ce0cc2736f8.1663756794.git.legion@kernel.org
Cc: Christian Brauner <brauner@kernel.org>
Cc: Joel Granados <joel.granados@gmail.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: Manfred Spraul <manfred@colorfullife.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Stable-dep-of: 98ca62ba9e ("sysctl: always initialize i_uid/i_gid")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit dc6ba95c6c ]
For Gen-1 targets like IPQ8074, it is seen that stressing out the
controller in host mode results in HC died error:
xhci-hcd.12.auto: xHCI host not responding to stop endpoint command
xhci-hcd.12.auto: xHCI host controller not responding, assume dead
xhci-hcd.12.auto: HC died; cleaning up
And at this instant only restarting the host mode fixes it. Disable
SuperSpeed instance in park mode for IPQ8074 to mitigate this issue.
Cc: stable@vger.kernel.org
Fixes: 5e09bc51d0 ("arm64: dts: ipq8074: enable USB support")
Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240704152848.3380602-3-quic_kriskura@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0046325ae5 ]
For Gen-1 targets like MSM8998, it is seen that stressing out the
controller in host mode results in HC died error:
xhci-hcd.12.auto: xHCI host not responding to stop endpoint command
xhci-hcd.12.auto: xHCI host controller not responding, assume dead
xhci-hcd.12.auto: HC died; cleaning up
And at this instant only restarting the host mode fixes it. Disable
SuperSpeed instance in park mode for MSM8998 to mitigate this issue.
Cc: stable@vger.kernel.org
Fixes: 026dad8f58 ("arm64: dts: qcom: msm8998: Add USB-related nodes")
Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240704152848.3380602-4-quic_kriskura@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit f82cdc37c4 upstream.
plpks_is_available() can be called on any platform via kexec but calls
_plpks_get_config() which makes a hcall, which will only work on pseries.
Fix this by returning early in plpks_is_available() if hcalls aren't
possible.
Fixes: 119da30d03 ("powerpc/pseries: Expose PLPKS config values, support additional fields")
Reported-by: Murphy Zhou <jencce.kernel@gmail.com>
Signed-off-by: Russell Currey <ruscur@russell.cc>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230222021708.146257-1-ruscur@russell.cc
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit e1c5ae59c0 ]
Christian noticed that it is possible for a privileged user to mount
most filesystems with a non-initial user namespace in sb->s_user_ns.
When fsopen() is called in a non-init namespace the caller's namespace
is recorded in fs_context->user_ns. If the returned file descriptor is
then passed to a process priviliged in init_user_ns, that process can
call fsconfig(fd_fs, FSCONFIG_CMD_CREATE), creating a new superblock
with sb->s_user_ns set to the namespace of the process which called
fsopen().
This is problematic. We cannot assume that any filesystem which does not
set FS_USERNS_MOUNT has been written with a non-initial s_user_ns in
mind, increasing the risk for bugs and security issues.
Prevent this by returning EPERM from sget_fc() when FS_USERNS_MOUNT is
not set for the filesystem and a non-initial user namespace will be
used. sget() does not need to be updated as it always uses the user
namespace of the current context, or the initial user namespace if
SB_SUBMOUNT is set.
Fixes: cb50b348c7 ("convenience helpers: vfs_get_super() and sget_fc()")
Reported-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Seth Forshee (DigitalOcean) <sforshee@kernel.org>
Link: https://lore.kernel.org/r/20240724-s_user_ns-fix-v1-1-895d07c94701@kernel.org
Reviewed-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c31fad1470 ]
nvme_map_data() is called when request has physical segments, hence
the nvme_unmap_data() should have same condition to avoid dereference.
Fixes: 4aedb70543 ("nvme-pci: split metadata handling from nvme_map_data / nvme_unmap_data")
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Nitesh Shetty <nj.shetty@samsung.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 630482ee06 ]
In sprd_iommu_cleanup() before calling function sprd_iommu_hw_en()
dom->sdev is equal to NULL, which leads to null dereference.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 9afea57384 ("iommu/sprd: Release dma buffer to avoid memory leak")
Signed-off-by: Artem Chernyshev <artem.chernyshev@red-soft.ru>
Reviewed-by: Chunyan Zhang <zhang.lyra@gmail.com>
Link: https://lore.kernel.org/r/20240716125522.3690358-1-artem.chernyshev@red-soft.ru
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ab42fcb511 ]
On a PCI adapter that provides up to 8 MSI interrupt sources the s390
implementation of PCI interrupts rejected to accommodate them, although
the underlying hardware is able to support that.
For MSI-X it is sufficient to allocate a single irq_desc per msi_desc,
but for MSI multiple irq descriptors are attached to and controlled by
a single msi descriptor. Add the appropriate loops to maintain multiple
irq descriptors and tie/untie them to/from the appropriate AIBV bit, if
a device driver allocates more than 1 MSI interrupt.
Common PCI code passes on requests to allocate a number of interrupt
vectors based on the device drivers' demand and the PCI functions'
capabilities. However, the root-complex of s390 systems support just a
limited number of interrupt vectors per PCI function.
Produce a kernel log message to inform about any architecture-specific
capping that might be done.
With this change, we had a PCI adapter successfully raising
interrupts to its device driver via all 8 sources.
Fixes: a384c8924a ("s390/PCI: Fix single MSI only check")
Signed-off-by: Gerd Bayer <gbayer@linux.ibm.com>
Reviewed-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5fd11b96b4 ]
Factor out adapter interrupt allocation from arch_setup_msi_irqs() in
preparation for enabling registration of multiple MSIs. Code movement
only, no change of functionality intended.
Signed-off-by: Gerd Bayer <gbayer@linux.ibm.com>
Reviewed-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Stable-dep-of: ab42fcb511 ("s390/pci: Allow allocation of more than 1 MSI interrupt")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 03230edb0b ]
The kmalloc size of pagevec mempool is incorrectly calculated.
It misses the size of page pointer and only accounts the number for the array.
Fixes: a0102bda5b ("ceph: move sb->wb_pagevec_pool to be a global mempool")
Signed-off-by: ethanwu <ethanwu@synology.com>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9931f7d5d2 ]
the Intel kbuild bot reports a link failure when IOSF_MBI is built-in
but the Merrifield driver is configured as a module. The
soc-intel-quirks.h is included for Merrifield platforms, but IOSF_MBI
is not selected for that platform.
ld.lld: error: undefined symbol: iosf_mbi_read
>>> referenced by atom.c
>>> sound/soc/sof/intel/atom.o:(atom_machine_select) in archive vmlinux.a
This patch forces the use of the fallback static inline when IOSF_MBI is not reachable.
Fixes: 536cfd2f37 ("ASoC: Intel: use common helpers to detect CPUs")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202407160704.zpdhJ8da-lkp@intel.com/
Suggested-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20240722083002.10800-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fc28d1c1fe ]
When Maxime originally added the BH2228FV to the spidev driver, he spelt
it incorrectly - the d should have been a b. Add the correctly spelt
compatible to the driver. Although the majority of users of this
compatible are abusers, there is at least one board that validly uses
the incorrect spelt compatible, so keep it in the driver to avoid
breaking the few real users it has.
Fixes: 8fad805bdc ("spi: spidev: Add Rohm DH2228FV DAC compatible string")
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://patch.msgid.link/20240717-ventricle-strewn-a7678c509e85@spud
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit be5852457b ]
Bring some order to reduce possibilities of conflicts.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230120075651.153763-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Stable-dep-of: fc28d1c1fe ("spi: spidev: add correct compatible for Rohm BH2228FV")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 92fc2c469e ]
pcie_aspm=off tells the kernel not to modify the ASPM configuration. This
setting does not guarantee that ASPM (Active State Power Management) is
disabled. Hence add pcie_port_pm=off. This disables power management for
all PCIe ports.
This patch has been tested on a workstation with a Samsung SSD 970 EVO Plus
NVMe SSD.
Fixes: 4641a8e6e1 ("nvme-pci: add trouble shooting steps for timeouts")
Cc: Keith Busch <kbusch@kernel.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3a5e762836 ]
mchp_corespi_init() reads the CONTROL register, sets the master and
motorola bits, but doesn't write the value back to the register. The
function also doesn't ensure the controller is disabled at the start,
which may present a problem if the controller was used by an
earlier boot stage as some settings (including the mode) can only be
modified while the controller is disabled.
Fixes: 9ac8d17694 ("spi: add support for microchip fpga spi controllers")
Signed-off-by: Steve Wilkins <steve.wilkins@raymarine.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20240715-designing-thus-05f7c26e1da7@wendy
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8f8bf52ed5 ]
Change legacy name master/slave to modern name host/target or controller.
No functional changed.
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20230823033003.3407403-7-yangyingliang@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Stable-dep-of: 3a5e762836 ("spi: microchip-core: fix init function not setting the master and motorola modes")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit de9850b5c6 ]
Setting up many of the registers for a new SPI transfer involves
unconditionally disabling the SPI controller, writing the register
value and re-enabling the controller. This is being done for registers
even when the value is unchanged and is also done for registers that
don't require the controller to be disabled for the change to take
effect. Make an effort to detect changes to the register values, and
only disables the controller if the new register value is different
and disabling the controller is required. This stops the controller
being repeated disabled and the bus going tristate before every
transfer.
Fixes: 9ac8d17694 ("spi: add support for microchip fpga spi controllers")
Signed-off-by: Steve Wilkins <steve.wilkins@raymarine.com>
Co-developed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20240715-depict-twirl-7e592eeabaad@wendy
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 502a582b8d ]
It is possible for the TXDONE interrupt be raised if the tx FIFO becomes
temporarily empty while transmitting, resulting in recursive calls to
mchp_corespi_write_fifo() and therefore a garbage message might be
transmitted depending on when the interrupt is triggered. Moving all of
the tx FIFO writes out of the TXDONE portion of the interrupt handler
avoids this problem.
Most of rest of the TXDONE portion of the handler is problematic too.
Only reading the rx FIFO (and finalising the transfer) when the TXDONE
interrupt is raised can cause the transfer to stall, if the final bytes
of rx data are not available in the rx FIFO when the final TXDONE
interrupt is raised. The transfer should be finalised regardless of
which interrupt is raised, provided that all tx data has been set and
all rx data received.
The first issue was encountered "in the wild", the second is
theoretical.
Fixes: 9ac8d17694 ("spi: add support for microchip fpga spi controllers")
Signed-off-by: Naga Sureshkumar Relli <nagasuresh.relli@microchip.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20240715-candied-deforest-585685ef3c8a@wendy
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2634f745ea ]
According to Documentation/devicetree/bindings/dsp/fsl,dsp.yaml
fsl,dsp-ctrl is a phandle to syscon block so we need to use correct
function to retrieve it.
Currently there is no SOF DSP DTS merged into mainline so there is no
need to support the old way of retrieving the dsp control node.
Fixes: 9ba23717b2 ("ASoC: SOF: imx8m: Implement DSP start")
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://patch.msgid.link/20240715151653.114751-1-daniel.baluta@oss.nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2ccfe94bc3 ]
The reference count is bumped by device_get_named_child_node()
and never dropped. Since LED APIs do not require it to be
bumped by the user, drop the reference after LED registration.
[andy: rewritten the commit message and amended the change]
Fixes: c223d9c636 ("auxdisplay: ht16k33: Add LED support")
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b4cf5fc01c ]
missing fdput() on one of the failure exits
Fixes: eacc56bb9d # v5.2
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6d745cd0e9 ]
struct nexthop_grp contains two reserved fields that are not initialized by
nla_put_nh_group(), and carry garbage. This can be observed e.g. with
strace (edited for clarity):
# ip nexthop add id 1 dev lo
# ip nexthop add id 101 group 1
# strace -e recvmsg ip nexthop get id 101
...
recvmsg(... [{nla_len=12, nla_type=NHA_GROUP},
[{id=1, weight=0, resvd1=0x69, resvd2=0x67}]] ...) = 52
The fields are reserved and therefore not currently used. But as they are, they
leak kernel memory, and the fact they are not just zero complicates repurposing
of the fields for new ends. Initialize the full structure.
Fixes: 430a049190 ("nexthop: Add support for nexthop groups")
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e9dbebae2e ]
The perfect_match parameter of the update_vlan_hash operation is __le16,
and is correctly converted from host byte-order in the lone caller,
stmmac_vlan_update().
However, the implementations of this caller, dwxgmac2_update_vlan_hash()
and dwxgmac2_update_vlan_hash(), both treat this parameter as host byte
order, using the following pattern:
u32 value = ...
...
writel(value | perfect_match, ...);
This is not correct because both:
1) value is host byte order; and
2) writel expects a host byte order value as it's first argument
I believe that this will break on big endian systems. And I expect it
has gone unnoticed by only being exercised on little endian systems.
The approach taken by this patch is to update the callback, and it's
caller to simply use a host byte order value.
Flagged by Sparse.
Compile tested only.
Fixes: c7ab0b8088 ("net: stmmac: Fallback to VLAN Perfect filtering if HASH is not available")
Signed-off-by: Simon Horman <horms@kernel.org>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fa96c6baef ]
tipc_udp_addr2str() should return non-zero value if the UDP media
address is invalid. Otherwise, a buffer overflow access can occur in
tipc_media_addr_printf(). Fix this by returning 1 on an invalid UDP
media address.
Fixes: d0f91938be ("tipc: add ip/udp media type")
Signed-off-by: Shigeru Yoshida <syoshida@redhat.com>
Reviewed-by: Tung Nguyen <tung.q.nguyen@endava.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a16909ae99 ]
We need to disable softinterrupts, else we get following problem:
1. pipapo_avx2 called from process context; fpu usable
2. preempt_disable() called, pcpu scratchmap in use
3. softirq handles rx or tx, we re-enter pipapo_avx2
4. fpu busy, fallback to generic non-avx version
5. fallback reuses scratch map and index, which are in use
by the preempted process
Handle this same way as generic version by first disabling
softinterrupts while the scratchmap is in use.
Fixes: f0b3d33806 ("netfilter: nft_set_pipapo_avx2: Add irq_fpu_usable() check, fallback to non-AVX2 version")
Cc: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3ba359c0cd ]
RCU use in bond_should_notify_peers() looks wrong, since it does
rcu_dereference(), leaves the critical section, and uses the
pointer after that.
Luckily, it's called either inside a nested RCU critical section
or with the RTNL held.
Annotate it with rcu_dereference_rtnl() instead, and remove the
inner RCU critical section.
Fixes: 4cb4f97b7e ("bonding: rebuild the lock use for bond_mii_monitor()")
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Acked-by: Jay Vosburgh <jv@jvosburgh.net>
Link: https://patch.msgid.link/20240719094119.35c62455087d.I68eb9c0f02545b364b79a59f2110f2cf5682a8e2@changeid
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cc73bbab4b ]
The Record Route IP option records the addresses of the routers that
routed the packet. In the case of forwarded packets, the kernel performs
a route lookup via fib_lookup() and fills in the preferred source
address of the matched route.
The lookup is performed with the DS field of the forwarded packet, but
using the RT_TOS() macro which only masks one of the two ECN bits. If
the packet is ECT(0) or CE, the matched route might be different than
the route via which the packet was forwarded as the input path masks
both of the ECN bits, resulting in the wrong address being filled in the
Record Route option.
Fix by masking both of the ECN bits.
Fixes: 8e36360ae8 ("ipv4: Remove route key identity dependencies in ip_rt_get_source().")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Link: https://patch.msgid.link/20240718123407.434778-1-idosch@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a263e5f309 ]
When the CM block migrated from CM2.5 to CM3.0, the address offset for
the Global CSR Access Privilege register was modified. We saw this in
the "MIPS64 I6500 Multiprocessing System Programmer's Guide," it is
stated that "the Global CSR Access Privilege register is located at
offset 0x0120" in section 5.4. It is at least the same for I6400.
This fix allows to use the VP cores in SMP mode if the reset values
were modified by the bootloader.
Based on the work of Vladimir Kondratiev
<vladimir.kondratiev@mobileye.com> and the feedback from Jiaxun Yang
<jiaxun.yang@flygoat.com>.
Fixes: 197e89e098 ("MIPS: mips-cm: Implement mips_cm_revision")
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 13c9b702e6 ]
Add a type cast for set8->pairs to fix below compile warning:
main.c: In function 'sets_patch':
main.c:699:50: warning: comparison of distinct pointer types lacks a cast
699 | BUILD_BUG_ON(set8->pairs != &set8->pairs[0].id);
| ^~
Fixes: 9707ac4fe2 ("tools/resolve_btfids: Refactor set sorting with types from btf_ids.h")
Signed-off-by: Liwei Song <liwei.song.lsong@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/bpf/20240722083305.4009723-1-liwei.song.lsong@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0be9ae5486 ]
Since commit 0108a4e9f3 ("bpf: ensure main program has an extable"),
prog->aux->func[0]->kallsyms is left as uninitialized. For BPF programs
with subprogs, the symbol for the main program is missing just as shown
in the output of perf script below:
ffffffff81284b69 qp_trie_lookup_elem+0xb9 ([kernel.kallsyms])
ffffffffc0011125 bpf_prog_a4a0eb0651e6af8b_lookup_qp_trie+0x5d (bpf...)
ffffffff8127bc2b bpf_for_each_array_elem+0x7b ([kernel.kallsyms])
ffffffffc00110a1 +0x25 ()
ffffffff8121a89a trace_call_bpf+0xca ([kernel.kallsyms])
Fix it by always using prog instead prog->aux->func[0] to emit ksymbol
event for the main program. After the fix, the output of perf script
will be correct:
ffffffff81284b96 qp_trie_lookup_elem+0xe6 ([kernel.kallsyms])
ffffffffc001382d bpf_prog_a4a0eb0651e6af8b_lookup_qp_trie+0x5d (bpf...)
ffffffff8127bc2b bpf_for_each_array_elem+0x7b ([kernel.kallsyms])
ffffffffc0013779 bpf_prog_245c55ab25cfcf40_qp_trie_lookup+0x25 (bpf...)
ffffffff8121a89a trace_call_bpf+0xca ([kernel.kallsyms])
Fixes: 0108a4e9f3 ("bpf: ensure main program has an extable")
Signed-off-by: Hou Tao <houtao1@huawei.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Yonghong Song <yonghong.song@linux.dev>
Reviewed-by: Krister Johansen <kjlx@templeofstupid.com>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/bpf/20240714065533.1112616-1-houtao@huaweicloud.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 28e8b7406d ]
dmam_free_coherent() frees a DMA allocation, which makes the
freed vaddr available for reuse, then calls devres_destroy()
to remove and free the data structure used to track the DMA
allocation. Between the two calls, it is possible for a
concurrent task to make an allocation with the same vaddr
and add it to the devres list.
If this happens, there will be two entries in the devres list
with the same vaddr and devres_destroy() can free the wrong
entry, triggering the WARN_ON() in dmam_match.
Fix by destroying the devres entry before freeing the DMA
allocation.
Tested:
kokonut //net/encryption
http://sponge2/b9145fe6-0f72-4325-ac2f-a84d81075b03
Fixes: 9ac7849e35 ("devres: device resource management")
Signed-off-by: Lance Richardson <rlance@google.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 638f326043 ]
AF_UNIX socket tracks the most recent OOB packet (in its receive queue)
with an `oob_skb` pointer. BPF redirecting does not account for that: when
an OOB packet is moved between sockets, `oob_skb` is left outdated. This
results in a single skb that may be accessed from two different sockets.
Take the easy way out: silently drop MSG_OOB data targeting any socket that
is in a sockmap or a sockhash. Note that such silent drop is akin to the
fate of redirected skb's scm_fp_list (SCM_RIGHTS, SCM_CREDENTIALS).
For symmetry, forbid MSG_OOB in unix_bpf_recvmsg().
Fixes: 314001f0bf ("af_unix: Add OOB support")
Suggested-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Jakub Sitnicki <jakub@cloudflare.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/bpf/20240713200218.2140950-2-mhal@rbox.co
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 189f1a976e ]
For all these years libbpf's BTF dumper has been emitting not strictly
valid syntax for function prototypes that have no input arguments.
Instead of `int (*blah)()` we should emit `int (*blah)(void)`.
This is not normally a problem, but it manifests when we get kfuncs in
vmlinux.h that have no input arguments. Due to compiler internal
specifics, we get no BTF information for such kfuncs, if they are not
declared with proper `(void)`.
The fix is trivial. We also need to adjust a few ancient tests that
happily assumed `()` is correct.
Fixes: 351131b51c ("libbpf: add btf_dump API for BTF-to-C conversion")
Reported-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://lore.kernel.org/bpf/20240712224442.282823-1-andrii@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 712aba5543 ]
As commit afa974b771 ("kbuild: add real-prereqs shorthand for
$(filter-out FORCE,$^)") explained, $(real-prereqs) is not just a list
of objects when linking a multi-object module. If a single-object module
is turned into a multi-object module, $^ (and therefore $(real-prereqs)
as well) contains header files recorded in the *.cmd file. Such headers
must be filtered out.
Now that a DTB can be built either from a single source or multiple
source files, the same issue can occur.
Consider the following scenario:
First, foo.dtb is implemented as a single-blob device tree.
The code looks something like this:
[Sample Code 1]
Makefile:
dtb-y += foo.dtb
foo.dts:
#include <dt-bindings/gpio/gpio.h>
/dts-v1/;
/ { };
When it is compiled, .foo.dtb.cmd records that foo.dtb depends on
scripts/dtc/include-prefixes/dt-bindings/gpio/gpio.h.
Later, foo.dtb is split into a base and an overlay. The code looks
something like this:
[Sample Code 2]
Makefile:
dtb-y += foo.dtb
foo-dtbs := foo-base.dtb foo-addon.dtbo
foo-base.dts:
#include <dt-bindings/gpio/gpio.h>
/dts-v1/;
/ { };
foo-addon.dtso:
/dts-v1/;
/plugin/;
/ { };
If you rebuild foo.dtb without 'make clean', you will get this error:
Overlay 'scripts/dtc/include-prefixes/dt-bindings/gpio/gpio.h' is incomplete
$(real-prereqs) contains not only foo-base.dtb and foo-addon.dtbo but
also scripts/dtc/include-prefixes/dt-bindings/gpio/gpio.h, which is
passed to scripts/dtc/fdtoverlay.
Fixes: 15d16d6dad ("kbuild: Add generic rule to apply fdtoverlay")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f06c0f82e3 ]
Commit 59c9081bc8 ("f2fs: allow write page cache when writting cp")
allows write() to write data to page cache during checkpoint, so block
count fields like .total_valid_block_count, .alloc_valid_block_count
and .rf_node_block_count may encounter race condition as below:
CP Thread A
- write_checkpoint
- block_operations
- f2fs_down_write(&sbi->node_change)
- __prepare_cp_block
: ckpt->valid_block_count = .total_valid_block_count
- f2fs_up_write(&sbi->node_change)
- write
- f2fs_preallocate_blocks
- f2fs_map_blocks(,F2FS_GET_BLOCK_PRE_AIO)
- f2fs_map_lock
- f2fs_down_read(&sbi->node_change)
- f2fs_reserve_new_blocks
- inc_valid_block_count
: percpu_counter_add(&sbi->alloc_valid_block_count, count)
: sbi->total_valid_block_count += count
- f2fs_up_read(&sbi->node_change)
- do_checkpoint
: sbi->last_valid_block_count = sbi->total_valid_block_count
: percpu_counter_set(&sbi->alloc_valid_block_count, 0)
: percpu_counter_set(&sbi->rf_node_block_count, 0)
- fsync
- need_do_checkpoint
- f2fs_space_for_roll_forward
: alloc_valid_block_count was reset to zero,
so, it may missed last data during checkpoint
Let's change to update .total_valid_block_count, .alloc_valid_block_count
and .rf_node_block_count in block_operations(), then their access can be
protected by .node_change and .cp_rwsem lock, so that it can avoid above
race condition.
Fixes: 59c9081bc8 ("f2fs: allow write page cache when writting cp")
Cc: Yunlei He <heyunlei@oppo.com>
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
