mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-03 00:54:09 +08:00
3f41368fbf
3600 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Conor Dooley
|
3f41368fbf |
riscv: dts: microchip: add an initial devicetree for the BeagleV Fire
Add an initial devicetree for the BeagleV Fire. This devicetree differs from that in the BeagleBoard BSP as it has a different memory configuration, however it will boot on the same FPGA images. PCI is disabled for now, as the Linux PCI driver (and the binding) assume which root port instance is in use. This will need to be fixed before PCI can be enabled. Link: https://www.beagleboard.org/boards/beaglev-fire Co-developed-by: Jamie Gibbons <jamie.gibbons@microchip.com> Signed-off-by: Jamie Gibbons <jamie.gibbons@microchip.com> Signed-off-by: Conor Dooley <conor.dooley@microchip.com> |
||
Matthias Brugger
|
edbce932b1 |
riscv: dts: starfive: Update flash partition layout
Up to now, the describe flash partition layout has some gaps. Use the whole flash chip by getting rid of the gaps. Suggested-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com> Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com> Reviewed-by: Emil Renner Berthing <emil.renner.berthing@canonical.com> Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com> Signed-off-by: Conor Dooley <conor.dooley@microchip.com> |
||
Inochi Amaoto
|
c61fea676b |
riscv: dts: thead: th1520: Add PMU event node
T-HEAD th1520 uses standard C910 chip and its pmu is already supported by OpenSBI. Add the pmu event description for T-HEAD th1520 SoC. Signed-off-by: Inochi Amaoto <inochiama@outlook.com> Link: https://www.xrvm.com/product/xuantie/4240217381324001280?spm=xrvm.27140568.0.0.7f979b29nzIa1m Reviewed-by: Guo Ren <guoren@kernel.org> Signed-off-by: Conor Dooley <conor.dooley@microchip.com> |
||
Henry Bell
|
2606bf583b |
riscv: dts: starfive: add Star64 board devicetree
The Pine64 Star64 is a development board based on the Starfive JH7110 SoC. The board features: - JH7110 SoC - 4/8 GiB LPDDR4 DRAM - AXP15060 PMIC - 40 pin GPIO header - 1x USB 3.0 host port - 3x USB 2.0 host port - 1x eMMC slot - 1x MicroSD slot - 1x QSPI Flash - 2x 1Gbps Ethernet port - 1x HDMI port - 1x 4-lane DSI - 1x 2-lane CSI - 1x PCIe 2.0 x1 lane Signed-off-by: Henry Bell <dmoo_dv@protonmail.com> Signed-off-by: Conor Dooley <conor.dooley@microchip.com> |
||
Linus Torvalds
|
f1f9984fdc |
RISC-V Patches for the 6.10 Merge Window, Part 2
* The compression format used for boot images is now configurable at build time, and these formats are shown in `make help`. * access_ok() has been optimized. * A pair of performance bugs have been fixed in the uaccess handlers. * Various fixes and cleanups, including one for the IMSIC build failure and one for the early-boot ftrace illegal NOPs bug. -----BEGIN PGP SIGNATURE----- iQJHBAABCAAxFiEEKzw3R0RoQ7JKlDp6LhMZ81+7GIkFAmZQtRwTHHBhbG1lckBk YWJiZWx0LmNvbQAKCRAuExnzX7sYiWPBD/0UitwMg88m6urvMd0Pfvwwbu/OnGqW TZT8C55iJi/e5f9K4mBrSyjATI8z/MblD+Zz0adX8ygavS4JuQ7DoWwb1yTT3pww +z74FkWeJuiar+HfbhQ602CfMrnzvWjnyJ3URemqy5pIBKyvD9gGkDJDZwf8hJTk Vqh5qVtnBqFBO9kWpIx+/pLCfpyHVNkhWr1AzKfoqQ1WPIpZ/o0IGdvS88rL+EBR QOXiwVhEsRfC+LT6Jhn8l2bGp7PaSRVOid19OxNsJKpAhpL6AOscaafclVrLBuTd gkys0rT2dHdoWTAkPHQpvlOI6OmGTgopxo5pUKJHS8J9VRoBun25zC1FGBF8uyVd 05CabWPnh7olNsRge9XiNj3x8PXjGVi7X7wUbRgOBG5aDc6TbKdxu37J0tXe0M7a Q74ctQvk8Nk6bQWirgTNlfJJHzL5pJbKc9VwY5uGX4qTmH+yEvCIt45ZXgXOuS/F eqijStkkdXUDnkMdcpaZJvXP80rHcgfP8bqevvPymRli8ER9zj9aXJQ3rmCUcPz+ EtbyS+vOEN31wNTA1EQlfIRxfvr22x7r70DDdRwmhuD1W1tgfblm+R0Cq76I5rnJ VSgXKq1b4mY0eautqXEnPGyqb7H8iJIq7AoyfbzzWN+4u6yVEUvpDKueeksy+fFt sGNtjWqGhWyKXg== =/Qtt -----END PGP SIGNATURE----- Merge tag 'riscv-for-linus-6.10-mw2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux Pull more RISC-V updates from Palmer Dabbelt: - The compression format used for boot images is now configurable at build time, and these formats are shown in `make help` - access_ok() has been optimized - A pair of performance bugs have been fixed in the uaccess handlers - Various fixes and cleanups, including one for the IMSIC build failure and one for the early-boot ftrace illegal NOPs bug * tag 'riscv-for-linus-6.10-mw2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: riscv: Fix early ftrace nop patching irqchip: riscv-imsic: Fixup riscv_ipi_set_virq_range() conflict riscv: selftests: Add signal handling vector tests riscv: mm: accelerate pagefault when badaccess riscv: uaccess: Relax the threshold for fast path riscv: uaccess: Allow the last potential unrolled copy riscv: typo in comment for get_f64_reg Use bool value in set_cpu_online() riscv: selftests: Add hwprobe binaries to .gitignore riscv: stacktrace: fixed walk_stackframe() ftrace: riscv: move from REGS to ARGS riscv: do not select MODULE_SECTIONS by default riscv: show help string for riscv-specific targets riscv: make image compression configurable riscv: cpufeature: Fix extension subset checking riscv: cpufeature: Fix thead vector hwcap removal riscv: rewrite __kernel_map_pages() to fix sleeping in invalid context riscv: force PAGE_SIZE linear mapping if debug_pagealloc is enabled riscv: Define TASK_SIZE_MAX for __access_ok() riscv: Remove PGDIR_SIZE_L3 and TASK_SIZE_MIN |
||
Alexandre Ghiti
|
6ca445d8af
|
riscv: Fix early ftrace nop patching
Commit |
||
|
Linus Torvalds
|
c760b3725e |
- A series ("kbuild: enable more warnings by default") from Arnd
Bergmann which enables a number of additional build-time warnings. We
fixed all the fallout which we could find, there may still be a few
stragglers.
- Samuel Holland has developed the series "Unified cross-architecture
kernel-mode FPU API". This does a lot of consolidation of
per-architecture kernel-mode FPU usage and enables the use of newer AMD
GPUs on RISC-V.
- Tao Su has fixed some selftests build warnings in the series
"Selftests: Fix compilation warnings due to missing _GNU_SOURCE
definition".
- This pull also includes a nilfs2 fixup from Ryusuke Konishi.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZk6OSAAKCRDdBJ7gKXxA
jpTGAP9hQaZ+g7CO38hKQAtEI8rwcZJtvUAP84pZEGMjYMGLxQD/S8z1o7UHx61j
DUbnunbOkU/UcPx3Fs/gp4KcJARMEgs=
=EPi9
-----END PGP SIGNATURE-----
Merge tag 'mm-nonmm-stable-2024-05-22-17-30' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull more non-mm updates from Andrew Morton:
- A series ("kbuild: enable more warnings by default") from Arnd
Bergmann which enables a number of additional build-time warnings. We
fixed all the fallout which we could find, there may still be a few
stragglers.
- Samuel Holland has developed the series "Unified cross-architecture
kernel-mode FPU API". This does a lot of consolidation of
per-architecture kernel-mode FPU usage and enables the use of newer
AMD GPUs on RISC-V.
- Tao Su has fixed some selftests build warnings in the series
"Selftests: Fix compilation warnings due to missing _GNU_SOURCE
definition".
- This pull also includes a nilfs2 fixup from Ryusuke Konishi.
* tag 'mm-nonmm-stable-2024-05-22-17-30' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (23 commits)
nilfs2: make block erasure safe in nilfs_finish_roll_forward()
selftests/harness: use 1024 in place of LINE_MAX
Revert "selftests/harness: remove use of LINE_MAX"
selftests/fpu: allow building on other architectures
selftests/fpu: move FP code to a separate translation unit
drm/amd/display: use ARCH_HAS_KERNEL_FPU_SUPPORT
drm/amd/display: only use hard-float, not altivec on powerpc
riscv: add support for kernel-mode FPU
x86: implement ARCH_HAS_KERNEL_FPU_SUPPORT
powerpc: implement ARCH_HAS_KERNEL_FPU_SUPPORT
LoongArch: implement ARCH_HAS_KERNEL_FPU_SUPPORT
lib/raid6: use CC_FLAGS_FPU for NEON CFLAGS
arm64: crypto: use CC_FLAGS_FPU for NEON CFLAGS
arm64: implement ARCH_HAS_KERNEL_FPU_SUPPORT
ARM: crypto: use CC_FLAGS_FPU for NEON CFLAGS
ARM: implement ARCH_HAS_KERNEL_FPU_SUPPORT
arch: add ARCH_HAS_KERNEL_FPU_SUPPORT
x86/fpu: fix asm/fpu/types.h include guard
kbuild: enable -Wcast-function-type-strict unconditionally
kbuild: enable -Wformat-truncation on clang
...
|
||
Palmer Dabbelt
|
c6c901b7d9
|
Merge patch series "riscv: Extension parsing fixes"
Charlie Jenkins <charlie@rivosinc.com> says: This series contains two minor fixes for the extension parsing in cpufeature.c. Some T-Head boards without vector 1.0 support report "v" in the isa string in their DT which will cause the kernel to run vector code. The code to blacklist "v" from these boards was doing so by using riscv_cached_mvendorid() which has not been populated at the time of extension parsing. This fix instead greedily reads the mvendorid CSR of the boot hart to determine if the cpu is from T-Head. The other fix is for an incorrect indexing bug. riscv extensions sometimes imply other extensions. When adding these "subset" extensions to the hardware capabilities array, they need to be checked if they are valid. The current code only checks if the extension that is including other extensions is valid and not the subset extensions. These patches were previously included in: https://lore.kernel.org/lkml/20240420-dev-charlie-support_thead_vector_6_9-v3-0-67cff4271d1d@rivosinc.com/ * b4-shazam-merge: riscv: cpufeature: Fix extension subset checking riscv: cpufeature: Fix thead vector hwcap removal Link: https://lore.kernel.org/r/20240502-cpufeature_fixes-v4-0-b3d1a088722d@rivosinc.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com> |
||
Kefeng Wang
|
4c6c002042
|
riscv: mm: accelerate pagefault when badaccess
The access_error() of vma already checked under per-VMA lock, if it is a bad access, directly handle error, no need to retry with mmap_lock again. Since the page faut is handled under per-VMA lock, count it as a vma lock event with VMA_LOCK_SUCCESS. Reviewed-by: Suren Baghdasaryan <surenb@google.com> Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com> Tested-by: Alexandre Ghiti <alexghiti@rivosinc.com> Link: https://lore.kernel.org/r/20240403083805.1818160-6-wangkefeng.wang@huawei.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com> |
||
Xiao Wang
|
9850e73e82
|
riscv: uaccess: Relax the threshold for fast path
The bytes copy for unaligned head would cover at most SZREG-1 bytes, so it's better to set the threshold as >= (SZREG-1 + word_copy stride size) which equals to 9*SZREG-1. Signed-off-by: Xiao Wang <xiao.w.wang@intel.com> Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com> Link: https://lore.kernel.org/r/20240313091929.4029960-1-xiao.w.wang@intel.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com> |
||
|
Xiao Wang
|
f1905946be
|
riscv: uaccess: Allow the last potential unrolled copy
When the dst buffer pointer points to the last accessible aligned addr, we could still run another iteration of unrolled copy. Signed-off-by: Xiao Wang <xiao.w.wang@intel.com> Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com> Link: https://lore.kernel.org/r/20240313103334.4036554-1-xiao.w.wang@intel.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com> |
||
Xingyou Chen
|
7e6eae24da
|
riscv: typo in comment for get_f64_reg
Signed-off-by: Xingyou Chen <rockrush@rockwork.org> Reviewed-by: Randy Dunlap <rdunlap@infradead.org> Link: https://lore.kernel.org/r/20240317055556.9449-1-rockrush@rockwork.org Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com> |
||
Zhao Ke
|
10378a39ed
|
Use bool value in set_cpu_online()
The declaration of set_cpu_online() takes a bool value. So replace int here to make it consistent with the declaration. Signed-off-by: Zhao Ke <ke.zhao@shingroup.cn> Reviewed-by: Charlie Jenkins <charlie@rivosinc.com> Link: https://lore.kernel.org/r/20240318065404.123668-1-ke.zhao@shingroup.cn Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com> |
||
|
Palmer Dabbelt
|
855ad0f7a1
|
Merge patch series "riscv: fix debug_pagealloc"
Nam Cao <namcao@linutronix.de> says: The debug_pagealloc feature is not functional on RISCV. With this feature enabled (CONFIG_DEBUG_PAGEALLOC=y and debug_pagealloc=on), kernel crashes early during boot. QEMU command that can reproduce this problem: qemu-system-riscv64 -machine virt \ -kernel Image \ -append "console=ttyS0 root=/dev/vda debug_pagealloc=on" \ -nographic \ -drive "file=root.img,format=raw,id=hd0" \ -device virtio-blk-device,drive=hd0 \ -m 4G \ This series makes debug_pagealloc functional. * b4-shazam-merge: riscv: rewrite __kernel_map_pages() to fix sleeping in invalid context riscv: force PAGE_SIZE linear mapping if debug_pagealloc is enabled Link: https://lore.kernel.org/r/cover.1715750938.git.namcao@linutronix.de Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com> |
||
Matthew Bystrin
|
a2a4d4a6a0
|
riscv: stacktrace: fixed walk_stackframe()
If the load access fault occures in a leaf function (with
CONFIG_FRAME_POINTER=y), when wrong stack trace will be displayed:
[<ffffffff804853c2>] regmap_mmio_read32le+0xe/0x1c
---[ end trace 0000000000000000 ]---
Registers dump:
ra 0xffffffff80485758 <regmap_mmio_read+36>
sp 0xffffffc80200b9a0
fp 0xffffffc80200b9b0
pc 0xffffffff804853ba <regmap_mmio_read32le+6>
Stack dump:
0xffffffc80200b9a0: 0xffffffc80200b9e0 0xffffffc80200b9e0
0xffffffc80200b9b0: 0xffffffff8116d7e8 0x0000000000000100
0xffffffc80200b9c0: 0xffffffd8055b9400 0xffffffd8055b9400
0xffffffc80200b9d0: 0xffffffc80200b9f0 0xffffffff8047c526
0xffffffc80200b9e0: 0xffffffc80200ba30 0xffffffff8047fe9a
The assembler dump of the function preambula:
add sp,sp,-16
sd s0,8(sp)
add s0,sp,16
In the fist stack frame, where ra is not stored on the stack we can
observe:
0(sp) 8(sp)
.---------------------------------------------.
sp->| frame->fp | frame->ra (saved fp) |
|---------------------------------------------|
fp->| .... | .... |
|---------------------------------------------|
| | |
and in the code check is performed:
if (regs && (regs->epc == pc) && (frame->fp & 0x7))
I see no reason to check frame->fp value at all, because it is can be
uninitialized value on the stack. A better way is to check frame->ra to
be an address on the stack. After the stacktrace shows as expect:
[<ffffffff804853c2>] regmap_mmio_read32le+0xe/0x1c
[<ffffffff80485758>] regmap_mmio_read+0x24/0x52
[<ffffffff8047c526>] _regmap_bus_reg_read+0x1a/0x22
[<ffffffff8047fe9a>] _regmap_read+0x5c/0xea
[<ffffffff80480376>] _regmap_update_bits+0x76/0xc0
...
---[ end trace 0000000000000000 ]---
As pointed by Samuel Holland it is incorrect to remove check of the stackframe
entirely.
Changes since v2 [2]:
- Add accidentally forgotten curly brace
Changes since v1 [1]:
- Instead of just dropping frame->fp check, replace it with validation of
frame->ra, which should be a stack address.
- Move frame pointer validation into the separate function.
[1] https://lore.kernel.org/linux-riscv/20240426072701.6463-1-dev.mbstr@gmail.com/
[2] https://lore.kernel.org/linux-riscv/20240521131314.48895-1-dev.mbstr@gmail.com/
Fixes:
|
||
Puranjay Mohan
|
7caa976546
|
ftrace: riscv: move from REGS to ARGS
This commit replaces riscv's support for FTRACE_WITH_REGS with support
for FTRACE_WITH_ARGS. This is required for the ongoing effort to stop
relying on stop_machine() for RISCV's implementation of ftrace.
The main relevant benefit that this change will bring for the above
use-case is that now we don't have separate ftrace_caller and
ftrace_regs_caller trampolines. This will allow the callsite to call
ftrace_caller by modifying a single instruction. Now the callsite can
do something similar to:
When not tracing: | When tracing:
func: func:
auipc t0, ftrace_caller_top auipc t0, ftrace_caller_top
nop <=========<Enable/Disable>=========> jalr t0, ftrace_caller_bottom
[...] [...]
The above assumes that we are dropping the support of calling a direct
trampoline from the callsite. We need to drop this as the callsite can't
change the target address to call, it can only enable/disable a call to
a preset target (ftrace_caller in the above diagram). We can later optimize
this by calling an intermediate dispatcher trampoline before ftrace_caller.
Currently, ftrace_regs_caller saves all CPU registers in the format of
struct pt_regs and allows the tracer to modify them. We don't need to
save all of the CPU registers because at function entry only a subset of
pt_regs is live:
|----------+----------+---------------------------------------------|
| Register | ABI Name | Description |
|----------+----------+---------------------------------------------|
| x1 | ra | Return address for traced function |
| x2 | sp | Stack pointer |
| x5 | t0 | Return address for ftrace_caller trampoline |
| x8 | s0/fp | Frame pointer |
| x10-11 | a0-1 | Function arguments/return values |
| x12-17 | a2-7 | Function arguments |
|----------+----------+---------------------------------------------|
See RISCV calling convention[1] for the above table.
Saving just the live registers decreases the amount of stack space
required from 288 Bytes to 112 Bytes.
Basic testing was done with this on the VisionFive 2 development board.
Note:
- Moving from REGS to ARGS will mean that RISCV will stop supporting
KPROBES_ON_FTRACE as it requires full pt_regs to be saved.
- KPROBES_ON_FTRACE will be supplanted by FPROBES see [2].
[1] https://riscv.org/wp-content/uploads/2015/01/riscv-calling.pdf
[2] https://lore.kernel.org/all/170887410337.564249.6360118840946697039.stgit@devnote2/
Signed-off-by: Puranjay Mohan <puranjay@kernel.org>
Tested-by: Björn Töpel <bjorn@rivosinc.com>
Reviewed-by: Björn Töpel <bjorn@rivosinc.com>
Link: https://lore.kernel.org/r/20240405142453.4187-1-puranjay@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
||
|
Palmer Dabbelt
|
12cf29c6f9
|
Merge patch series "riscv: access_ok() optimization"
Samuel Holland <samuel.holland@sifive.com> says: This series optimizes access_ok() by defining TASK_SIZE_MAX. At Alex's suggestion, I also tried making TASK_SIZE constant (specifically by making PGDIR_SHIFT a variable instead of a ternary expression, then replacing the load with an immediate using ALTERNATIVE). This appeared to slightly improve performance on some implementations (C906) but regressed it on others (FU740). So I am leaving further optimizations to a later series. * b4-shazam-merge: riscv: Define TASK_SIZE_MAX for __access_ok() riscv: Remove PGDIR_SIZE_L3 and TASK_SIZE_MIN Link: https://lore.kernel.org/r/20240327143858.711792-1-samuel.holland@sifive.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com> |
||
Qingfang Deng
|
2aff5f955b
|
riscv: do not select MODULE_SECTIONS by default
Since commit
|
||
Emil Renner Berthing
|
07501c4907
|
riscv: show help string for riscv-specific targets
Define the archhelp variable so that 'make ACRH=riscv help' will show the targets specific to building a RISC-V kernel like other architectures. Tested-by: Björn Töpel <bjorn@rivosinc.com> Signed-off-by: Emil Renner Berthing <emil.renner.berthing@canonical.com> Reviewed-by: Masahiro Yamada <masahiroy@kernel.org> Link: https://lore.kernel.org/r/20240504193446.196886-3-emil.renner.berthing@canonical.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com> |
||
|
Emil Renner Berthing
|
e79dfcbfb9
|
riscv: make image compression configurable
Previously the build process would always set KBUILD_IMAGE to the uncompressed Image file (unless XIP_KERNEL or EFI_ZBOOT was enabled) and unconditionally compress it into Image.gz. However there are already build targets for Image.bz2, Image.lz4, Image.lzma, Image.lzo and Image.zstd, so let's make use of those, make the compression method configurable and set KBUILD_IMAGE accordingly so that targets like 'make install' and 'make bindeb-pkg' will use the chosen image. Tested-by: Björn Töpel <bjorn@rivosinc.com> Signed-off-by: Emil Renner Berthing <emil.renner.berthing@canonical.com> Reviewed-by: Nicolas Schier <n.schier@avm.de> Reviewed-by: Masahiro Yamada <masahiroy@kernel.org> Link: https://lore.kernel.org/r/20240504193446.196886-2-emil.renner.berthing@canonical.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com> |
||
|
Linus Torvalds
|
0bfbc914d9 |
RISC-V Patches for the 6.10 Merge Window, Part 1
* Support for byte/half-word compare-and-exchange, emulated via LR/SC
loops.
* Support for Rust.
* Support for Zihintpause in hwprobe.
* Support for the PR_RISCV_SET_ICACHE_FLUSH_CTX prctl().
* Support for lockless lockrefs.
-----BEGIN PGP SIGNATURE-----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=YLoD
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-6.10-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V updates from Palmer Dabbelt:
- Add byte/half-word compare-and-exchange, emulated via LR/SC loops
- Support for Rust
- Support for Zihintpause in hwprobe
- Add PR_RISCV_SET_ICACHE_FLUSH_CTX prctl()
- Support lockless lockrefs
* tag 'riscv-for-linus-6.10-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (42 commits)
riscv: defconfig: Enable CONFIG_CLK_SOPHGO_CV1800
riscv: select ARCH_HAS_FAST_MULTIPLIER
riscv: mm: still create swiotlb buffer for kmalloc() bouncing if required
riscv: Annotate pgtable_l{4,5}_enabled with __ro_after_init
riscv: Remove redundant CONFIG_64BIT from pgtable_l{4,5}_enabled
riscv: mm: Always use an ASID to flush mm contexts
riscv: mm: Preserve global TLB entries when switching contexts
riscv: mm: Make asid_bits a local variable
riscv: mm: Use a fixed layout for the MM context ID
riscv: mm: Introduce cntx2asid/cntx2version helper macros
riscv: Avoid TLB flush loops when affected by SiFive CIP-1200
riscv: Apply SiFive CIP-1200 workaround to single-ASID sfence.vma
riscv: mm: Combine the SMP and UP TLB flush code
riscv: Only send remote fences when some other CPU is online
riscv: mm: Broadcast kernel TLB flushes only when needed
riscv: Use IPIs for remote cache/TLB flushes by default
riscv: Factor out page table TLB synchronization
riscv: Flush the instruction cache during SMP bringup
riscv: hwprobe: export Zihintpause ISA extension
riscv: misaligned: remove CONFIG_RISCV_M_MODE specific code
...
|
||
Charlie Jenkins
|
e67e98ee89
|
riscv: cpufeature: Fix extension subset checking
This loop is supposed to check if ext->subset_ext_ids[j] is valid, rather
than if ext->subset_ext_ids[i] is valid, before setting the extension
id ext->subset_ext_ids[j] in isainfo->isa.
Signed-off-by: Charlie Jenkins <charlie@rivosinc.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Fixes:
|
||
|
Charlie Jenkins
|
e482eab4d1
|
riscv: cpufeature: Fix thead vector hwcap removal
The riscv_cpuinfo struct that contains mvendorid and marchid is not
populated until all harts are booted which happens after the DT parsing.
Use the mvendorid/marchid from the boot hart to determine if the DT
contains an invalid V.
Fixes:
|
||
Nam Cao
|
fb1cf08783
|
riscv: rewrite __kernel_map_pages() to fix sleeping in invalid context
__kernel_map_pages() is a debug function which clears the valid bit in page
table entry for deallocated pages to detect illegal memory accesses to
freed pages.
This function set/clear the valid bit using __set_memory(). __set_memory()
acquires init_mm's semaphore, and this operation may sleep. This is
problematic, because __kernel_map_pages() can be called in atomic context,
and thus is illegal to sleep. An example warning that this causes:
BUG: sleeping function called from invalid context at kernel/locking/rwsem.c:1578
in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 2, name: kthreadd
preempt_count: 2, expected: 0
CPU: 0 PID: 2 Comm: kthreadd Not tainted 6.9.0-g1d4c6d784ef6 #37
Hardware name: riscv-virtio,qemu (DT)
Call Trace:
[<ffffffff800060dc>] dump_backtrace+0x1c/0x24
[<ffffffff8091ef6e>] show_stack+0x2c/0x38
[<ffffffff8092baf8>] dump_stack_lvl+0x5a/0x72
[<ffffffff8092bb24>] dump_stack+0x14/0x1c
[<ffffffff8003b7ac>] __might_resched+0x104/0x10e
[<ffffffff8003b7f4>] __might_sleep+0x3e/0x62
[<ffffffff8093276a>] down_write+0x20/0x72
[<ffffffff8000cf00>] __set_memory+0x82/0x2fa
[<ffffffff8000d324>] __kernel_map_pages+0x5a/0xd4
[<ffffffff80196cca>] __alloc_pages_bulk+0x3b2/0x43a
[<ffffffff8018ee82>] __vmalloc_node_range+0x196/0x6ba
[<ffffffff80011904>] copy_process+0x72c/0x17ec
[<ffffffff80012ab4>] kernel_clone+0x60/0x2fe
[<ffffffff80012f62>] kernel_thread+0x82/0xa0
[<ffffffff8003552c>] kthreadd+0x14a/0x1be
[<ffffffff809357de>] ret_from_fork+0xe/0x1c
Rewrite this function with apply_to_existing_page_range(). It is fine to
not have any locking, because __kernel_map_pages() works with pages being
allocated/deallocated and those pages are not changed by anyone else in the
meantime.
Fixes:
|
||
|
Nam Cao
|
c67ddf59ac
|
riscv: force PAGE_SIZE linear mapping if debug_pagealloc is enabled
debug_pagealloc is a debug feature which clears the valid bit in page table
entry for freed pages to detect illegal accesses to freed memory.
For this feature to work, virtual mapping must have PAGE_SIZE resolution.
(No, we cannot map with huge pages and split them only when needed; because
pages can be allocated/freed in atomic context and page splitting cannot be
done in atomic context)
Force linear mapping to use small pages if debug_pagealloc is enabled.
Note that it is not necessary to force the entire linear mapping, but only
those that are given to memory allocator. Some parts of memory can keep
using huge page mapping (for example, kernel's executable code). But these
parts are minority, so keep it simple. This is just a debug feature, some
extra overhead should be acceptable.
Fixes:
|
||
|
Linus Torvalds
|
1b03616209 |
soc: devicetree updates for v6.10, part 2
This is a follow-up to an earlier pull request for device tree changes,
as three platform maintainers sent their contents too late to be included
in the main set, but had not caused any further problems since then:
- The Amlogic platform now containts support for two new SoC types,
the A4 and A5 chips for audio applications. Both come with a
reference board, and one more dts file gets addded for the
combination of the MNT Reform Laptop with the BPI-CM4 CPU
module
- The ASpeed platform adds support for six addititional server
platforms that use ast2500 or ast2600 as their BMC, while
another one gets removed.
- The RISC-V platforms from Microchip, Starfive and and T-HEAD
get additional features for existing hardware, plus the
addition of the Milk-V Mars based on the StarFive VisionFive v2
board.
-----BEGIN PGP SIGNATURE-----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=iChs
-----END PGP SIGNATURE-----
Merge tag 'soc-dt-late-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull more SoC devicetree updates from Arnd Bergmann:
"This is a follow-up to an earlier pull request for device tree
changes, as three platform maintainers sent their contents too late to
be included in the main set, but had not caused any further problems
since then:
- The Amlogic platform now containts support for two new SoC types,
the A4 and A5 chips for audio applications. Both come with a
reference board, and one more dts file gets addded for the
combination of the MNT Reform Laptop with the BPI-CM4 CPU module
- The ASpeed platform adds support for six addititional server
platforms that use ast2500 or ast2600 as their BMC, while another
one gets removed
- The RISC-V platforms from Microchip, Starfive and and T-HEAD get
additional features for existing hardware, plus the addition of the
Milk-V Mars based on the StarFive VisionFive v2 board"
* tag 'soc-dt-late-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (76 commits)
riscv: dts: microchip: add pac1934 power-monitor to icicle
riscv: dts: thead: Fix node ordering in TH1520 device tree
ARM: dts: aspeed: Add ASRock E3C256D4I BMC
dt-bindings: arm: aspeed: document ASRock E3C256D4I
dt-bindings: trivial-devices: add isil,isl69269
ARM: dts: aspeed: x4tf: Add dts for asus x4tf project
dt-bindings: arm: aspeed: add ASUS X4TF board
ARM: dts: aspeed: Remove Facebook Cloudripper dts
ARM: dts: aspeed: drop unused ref_voltage ADC property
ARM: dts: aspeed: harma: correct Mellanox multi-host property
ARM: dts: aspeed: yosemitev2: correct Mellanox multi-host property
ARM: dts: aspeed: yosemite4: correct Mellanox multi-host property
ARM: dts: aspeed: greatlakes: correct Mellanox multi-host property
ARM: dts: aspeed: Modify I2C bus configuration
ARM: dts: aspeed: Disable unused ADC channels for Asrock X570D4U BMC
ARM: dts: aspeed: Modify GPIO table for Asrock X570D4U BMC
ARM: dts: aspeed: yosemite4: set bus13 frequency to 100k
ARM: dts: Aspeed: Bonnell: Fix NVMe LED labels
ARM: dts: aspeed: yosemite4: Enable ipmb device for OCP debug card
ARM: dts: aspeed: ahe50dc: Update lm25066 regulator name
...
|
||
Samuel Holland
|
77acc6b55a |
riscv: add support for kernel-mode FPU
This is motivated by the amdgpu DRM driver, which needs floating-point code to support recent hardware. That code is not performance-critical, so only provide a minimal non-preemptible implementation for now. Support is limited to riscv64 because riscv32 requires runtime (libgcc) assistance to convert between doubles and 64-bit integers. Link: https://lkml.kernel.org/r/20240329072441.591471-12-samuel.holland@sifive.com Signed-off-by: Samuel Holland <samuel.holland@sifive.com> Acked-by: Palmer Dabbelt <palmer@rivosinc.com> Reviewed-by: Palmer Dabbelt <palmer@rivosinc.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Acked-by: Christian König <christian.koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Borislav Petkov (AMD) <bp@alien8.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Huacai Chen <chenhuacai@kernel.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Masahiro Yamada <masahiroy@kernel.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Nathan Chancellor <nathan@kernel.org> Cc: Nicolas Schier <nicolas@fjasle.eu> Cc: Russell King <linux@armlinux.org.uk> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: WANG Xuerui <git@xen0n.name> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Linus Torvalds
|
61307b7be4 |
The usual shower of singleton fixes and minor series all over MM,
documented (hopefully adequately) in the respective changelogs. Notable
series include:
- Lucas Stach has provided some page-mapping
cleanup/consolidation/maintainability work in the series "mm/treewide:
Remove pXd_huge() API".
- In the series "Allow migrate on protnone reference with
MPOL_PREFERRED_MANY policy", Donet Tom has optimized mempolicy's
MPOL_PREFERRED_MANY mode, yielding almost doubled performance in one
test.
- In their series "Memory allocation profiling" Kent Overstreet and
Suren Baghdasaryan have contributed a means of determining (via
/proc/allocinfo) whereabouts in the kernel memory is being allocated:
number of calls and amount of memory.
- Matthew Wilcox has provided the series "Various significant MM
patches" which does a number of rather unrelated things, but in largely
similar code sites.
- In his series "mm: page_alloc: freelist migratetype hygiene" Johannes
Weiner has fixed the page allocator's handling of migratetype requests,
with resulting improvements in compaction efficiency.
- In the series "make the hugetlb migration strategy consistent" Baolin
Wang has fixed a hugetlb migration issue, which should improve hugetlb
allocation reliability.
- Liu Shixin has hit an I/O meltdown caused by readahead in a
memory-tight memcg. Addressed in the series "Fix I/O high when memory
almost met memcg limit".
- In the series "mm/filemap: optimize folio adding and splitting" Kairui
Song has optimized pagecache insertion, yielding ~10% performance
improvement in one test.
- Baoquan He has cleaned up and consolidated the early zone
initialization code in the series "mm/mm_init.c: refactor
free_area_init_core()".
- Baoquan has also redone some MM initializatio code in the series
"mm/init: minor clean up and improvement".
- MM helper cleanups from Christoph Hellwig in his series "remove
follow_pfn".
- More cleanups from Matthew Wilcox in the series "Various page->flags
cleanups".
- Vlastimil Babka has contributed maintainability improvements in the
series "memcg_kmem hooks refactoring".
- More folio conversions and cleanups in Matthew Wilcox's series
"Convert huge_zero_page to huge_zero_folio"
"khugepaged folio conversions"
"Remove page_idle and page_young wrappers"
"Use folio APIs in procfs"
"Clean up __folio_put()"
"Some cleanups for memory-failure"
"Remove page_mapping()"
"More folio compat code removal"
- David Hildenbrand chipped in with "fs/proc/task_mmu: convert hugetlb
functions to work on folis".
- Code consolidation and cleanup work related to GUP's handling of
hugetlbs in Peter Xu's series "mm/gup: Unify hugetlb, part 2".
- Rick Edgecombe has developed some fixes to stack guard gaps in the
series "Cover a guard gap corner case".
- Jinjiang Tu has fixed KSM's behaviour after a fork+exec in the series
"mm/ksm: fix ksm exec support for prctl".
- Baolin Wang has implemented NUMA balancing for multi-size THPs. This
is a simple first-cut implementation for now. The series is "support
multi-size THP numa balancing".
- Cleanups to vma handling helper functions from Matthew Wilcox in the
series "Unify vma_address and vma_pgoff_address".
- Some selftests maintenance work from Dev Jain in the series
"selftests/mm: mremap_test: Optimizations and style fixes".
- Improvements to the swapping of multi-size THPs from Ryan Roberts in
the series "Swap-out mTHP without splitting".
- Kefeng Wang has significantly optimized the handling of arm64's
permission page faults in the series
"arch/mm/fault: accelerate pagefault when badaccess"
"mm: remove arch's private VM_FAULT_BADMAP/BADACCESS"
- GUP cleanups from David Hildenbrand in "mm/gup: consistently call it
GUP-fast".
- hugetlb fault code cleanups from Vishal Moola in "Hugetlb fault path to
use struct vm_fault".
- selftests build fixes from John Hubbard in the series "Fix
selftests/mm build without requiring "make headers"".
- Memory tiering fixes/improvements from Ho-Ren (Jack) Chuang in the
series "Improved Memory Tier Creation for CPUless NUMA Nodes". Fixes
the initialization code so that migration between different memory types
works as intended.
- David Hildenbrand has improved follow_pte() and fixed an errant driver
in the series "mm: follow_pte() improvements and acrn follow_pte()
fixes".
- David also did some cleanup work on large folio mapcounts in his
series "mm: mapcount for large folios + page_mapcount() cleanups".
- Folio conversions in KSM in Alex Shi's series "transfer page to folio
in KSM".
- Barry Song has added some sysfs stats for monitoring multi-size THP's
in the series "mm: add per-order mTHP alloc and swpout counters".
- Some zswap cleanups from Yosry Ahmed in the series "zswap same-filled
and limit checking cleanups".
- Matthew Wilcox has been looking at buffer_head code and found the
documentation to be lacking. The series is "Improve buffer head
documentation".
- Multi-size THPs get more work, this time from Lance Yang. His series
"mm/madvise: enhance lazyfreeing with mTHP in madvise_free" optimizes
the freeing of these things.
- Kemeng Shi has added more userspace-visible writeback instrumentation
in the series "Improve visibility of writeback".
- Kemeng Shi then sent some maintenance work on top in the series "Fix
and cleanups to page-writeback".
- Matthew Wilcox reduces mmap_lock traffic in the anon vma code in the
series "Improve anon_vma scalability for anon VMAs". Intel's test bot
reported an improbable 3x improvement in one test.
- SeongJae Park adds some DAMON feature work in the series
"mm/damon: add a DAMOS filter type for page granularity access recheck"
"selftests/damon: add DAMOS quota goal test"
- Also some maintenance work in the series
"mm/damon/paddr: simplify page level access re-check for pageout"
"mm/damon: misc fixes and improvements"
- David Hildenbrand has disabled some known-to-fail selftests ni the
series "selftests: mm: cow: flag vmsplice() hugetlb tests as XFAIL".
- memcg metadata storage optimizations from Shakeel Butt in "memcg:
reduce memory consumption by memcg stats".
- DAX fixes and maintenance work from Vishal Verma in the series
"dax/bus.c: Fixups for dax-bus locking".
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZkgQYwAKCRDdBJ7gKXxA
jrdKAP9WVJdpEcXxpoub/vVE0UWGtffr8foifi9bCwrQrGh5mgEAx7Yf0+d/oBZB
nvA4E0DcPrUAFy144FNM0NTCb7u9vAw=
=V3R/
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2024-05-17-19-19' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull mm updates from Andrew Morton:
"The usual shower of singleton fixes and minor series all over MM,
documented (hopefully adequately) in the respective changelogs.
Notable series include:
- Lucas Stach has provided some page-mapping cleanup/consolidation/
maintainability work in the series "mm/treewide: Remove pXd_huge()
API".
- In the series "Allow migrate on protnone reference with
MPOL_PREFERRED_MANY policy", Donet Tom has optimized mempolicy's
MPOL_PREFERRED_MANY mode, yielding almost doubled performance in
one test.
- In their series "Memory allocation profiling" Kent Overstreet and
Suren Baghdasaryan have contributed a means of determining (via
/proc/allocinfo) whereabouts in the kernel memory is being
allocated: number of calls and amount of memory.
- Matthew Wilcox has provided the series "Various significant MM
patches" which does a number of rather unrelated things, but in
largely similar code sites.
- In his series "mm: page_alloc: freelist migratetype hygiene"
Johannes Weiner has fixed the page allocator's handling of
migratetype requests, with resulting improvements in compaction
efficiency.
- In the series "make the hugetlb migration strategy consistent"
Baolin Wang has fixed a hugetlb migration issue, which should
improve hugetlb allocation reliability.
- Liu Shixin has hit an I/O meltdown caused by readahead in a
memory-tight memcg. Addressed in the series "Fix I/O high when
memory almost met memcg limit".
- In the series "mm/filemap: optimize folio adding and splitting"
Kairui Song has optimized pagecache insertion, yielding ~10%
performance improvement in one test.
- Baoquan He has cleaned up and consolidated the early zone
initialization code in the series "mm/mm_init.c: refactor
free_area_init_core()".
- Baoquan has also redone some MM initializatio code in the series
"mm/init: minor clean up and improvement".
- MM helper cleanups from Christoph Hellwig in his series "remove
follow_pfn".
- More cleanups from Matthew Wilcox in the series "Various
page->flags cleanups".
- Vlastimil Babka has contributed maintainability improvements in the
series "memcg_kmem hooks refactoring".
- More folio conversions and cleanups in Matthew Wilcox's series:
"Convert huge_zero_page to huge_zero_folio"
"khugepaged folio conversions"
"Remove page_idle and page_young wrappers"
"Use folio APIs in procfs"
"Clean up __folio_put()"
"Some cleanups for memory-failure"
"Remove page_mapping()"
"More folio compat code removal"
- David Hildenbrand chipped in with "fs/proc/task_mmu: convert
hugetlb functions to work on folis".
- Code consolidation and cleanup work related to GUP's handling of
hugetlbs in Peter Xu's series "mm/gup: Unify hugetlb, part 2".
- Rick Edgecombe has developed some fixes to stack guard gaps in the
series "Cover a guard gap corner case".
- Jinjiang Tu has fixed KSM's behaviour after a fork+exec in the
series "mm/ksm: fix ksm exec support for prctl".
- Baolin Wang has implemented NUMA balancing for multi-size THPs.
This is a simple first-cut implementation for now. The series is
"support multi-size THP numa balancing".
- Cleanups to vma handling helper functions from Matthew Wilcox in
the series "Unify vma_address and vma_pgoff_address".
- Some selftests maintenance work from Dev Jain in the series
"selftests/mm: mremap_test: Optimizations and style fixes".
- Improvements to the swapping of multi-size THPs from Ryan Roberts
in the series "Swap-out mTHP without splitting".
- Kefeng Wang has significantly optimized the handling of arm64's
permission page faults in the series
"arch/mm/fault: accelerate pagefault when badaccess"
"mm: remove arch's private VM_FAULT_BADMAP/BADACCESS"
- GUP cleanups from David Hildenbrand in "mm/gup: consistently call
it GUP-fast".
- hugetlb fault code cleanups from Vishal Moola in "Hugetlb fault
path to use struct vm_fault".
- selftests build fixes from John Hubbard in the series "Fix
selftests/mm build without requiring "make headers"".
- Memory tiering fixes/improvements from Ho-Ren (Jack) Chuang in the
series "Improved Memory Tier Creation for CPUless NUMA Nodes".
Fixes the initialization code so that migration between different
memory types works as intended.
- David Hildenbrand has improved follow_pte() and fixed an errant
driver in the series "mm: follow_pte() improvements and acrn
follow_pte() fixes".
- David also did some cleanup work on large folio mapcounts in his
series "mm: mapcount for large folios + page_mapcount() cleanups".
- Folio conversions in KSM in Alex Shi's series "transfer page to
folio in KSM".
- Barry Song has added some sysfs stats for monitoring multi-size
THP's in the series "mm: add per-order mTHP alloc and swpout
counters".
- Some zswap cleanups from Yosry Ahmed in the series "zswap
same-filled and limit checking cleanups".
- Matthew Wilcox has been looking at buffer_head code and found the
documentation to be lacking. The series is "Improve buffer head
documentation".
- Multi-size THPs get more work, this time from Lance Yang. His
series "mm/madvise: enhance lazyfreeing with mTHP in madvise_free"
optimizes the freeing of these things.
- Kemeng Shi has added more userspace-visible writeback
instrumentation in the series "Improve visibility of writeback".
- Kemeng Shi then sent some maintenance work on top in the series
"Fix and cleanups to page-writeback".
- Matthew Wilcox reduces mmap_lock traffic in the anon vma code in
the series "Improve anon_vma scalability for anon VMAs". Intel's
test bot reported an improbable 3x improvement in one test.
- SeongJae Park adds some DAMON feature work in the series
"mm/damon: add a DAMOS filter type for page granularity access recheck"
"selftests/damon: add DAMOS quota goal test"
- Also some maintenance work in the series
"mm/damon/paddr: simplify page level access re-check for pageout"
"mm/damon: misc fixes and improvements"
- David Hildenbrand has disabled some known-to-fail selftests ni the
series "selftests: mm: cow: flag vmsplice() hugetlb tests as
XFAIL".
- memcg metadata storage optimizations from Shakeel Butt in "memcg:
reduce memory consumption by memcg stats".
- DAX fixes and maintenance work from Vishal Verma in the series
"dax/bus.c: Fixups for dax-bus locking""
* tag 'mm-stable-2024-05-17-19-19' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (426 commits)
memcg, oom: cleanup unused memcg_oom_gfp_mask and memcg_oom_order
selftests/mm: hugetlb_madv_vs_map: avoid test skipping by querying hugepage size at runtime
mm/hugetlb: add missing VM_FAULT_SET_HINDEX in hugetlb_wp
mm/hugetlb: add missing VM_FAULT_SET_HINDEX in hugetlb_fault
selftests: cgroup: add tests to verify the zswap writeback path
mm: memcg: make alloc_mem_cgroup_per_node_info() return bool
mm/damon/core: fix return value from damos_wmark_metric_value
mm: do not update memcg stats for NR_{FILE/SHMEM}_PMDMAPPED
selftests: cgroup: remove redundant enabling of memory controller
Docs/mm/damon/maintainer-profile: allow posting patches based on damon/next tree
Docs/mm/damon/maintainer-profile: change the maintainer's timezone from PST to PT
Docs/mm/damon/design: use a list for supported filters
Docs/admin-guide/mm/damon/usage: fix wrong schemes effective quota update command
Docs/admin-guide/mm/damon/usage: fix wrong example of DAMOS filter matching sysfs file
selftests/damon: classify tests for functionalities and regressions
selftests/damon/_damon_sysfs: use 'is' instead of '==' for 'None'
selftests/damon/_damon_sysfs: find sysfs mount point from /proc/mounts
selftests/damon/_damon_sysfs: check errors from nr_schemes file reads
mm/damon/core: initialize ->esz_bp from damos_quota_init_priv()
selftests/damon: add a test for DAMOS quota goal
...
|
||
|
Linus Torvalds
|
ff9a79307f |
Kbuild updates for v6.10
- Avoid 'constexpr', which is a keyword in C23
- Allow 'dtbs_check' and 'dt_compatible_check' run independently of
'dt_binding_check'
- Fix weak references to avoid GOT entries in position-independent
code generation
- Convert the last use of 'optional' property in arch/sh/Kconfig
- Remove support for the 'optional' property in Kconfig
- Remove support for Clang's ThinLTO caching, which does not work with
the .incbin directive
- Change the semantics of $(src) so it always points to the source
directory, which fixes Makefile inconsistencies between upstream and
downstream
- Fix 'make tar-pkg' for RISC-V to produce a consistent package
- Provide reasonable default coverage for objtool, sanitizers, and
profilers
- Remove redundant OBJECT_FILES_NON_STANDARD, KASAN_SANITIZE, etc.
- Remove the last use of tristate choice in drivers/rapidio/Kconfig
- Various cleanups and fixes in Kconfig
-----BEGIN PGP SIGNATURE-----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=D5B/
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Avoid 'constexpr', which is a keyword in C23
- Allow 'dtbs_check' and 'dt_compatible_check' run independently of
'dt_binding_check'
- Fix weak references to avoid GOT entries in position-independent code
generation
- Convert the last use of 'optional' property in arch/sh/Kconfig
- Remove support for the 'optional' property in Kconfig
- Remove support for Clang's ThinLTO caching, which does not work with
the .incbin directive
- Change the semantics of $(src) so it always points to the source
directory, which fixes Makefile inconsistencies between upstream and
downstream
- Fix 'make tar-pkg' for RISC-V to produce a consistent package
- Provide reasonable default coverage for objtool, sanitizers, and
profilers
- Remove redundant OBJECT_FILES_NON_STANDARD, KASAN_SANITIZE, etc.
- Remove the last use of tristate choice in drivers/rapidio/Kconfig
- Various cleanups and fixes in Kconfig
* tag 'kbuild-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (46 commits)
kconfig: use sym_get_choice_menu() in sym_check_prop()
rapidio: remove choice for enumeration
kconfig: lxdialog: remove initialization with A_NORMAL
kconfig: m/nconf: merge two item_add_str() calls
kconfig: m/nconf: remove dead code to display value of bool choice
kconfig: m/nconf: remove dead code to display children of choice members
kconfig: gconf: show checkbox for choice correctly
kbuild: use GCOV_PROFILE and KCSAN_SANITIZE in scripts/Makefile.modfinal
Makefile: remove redundant tool coverage variables
kbuild: provide reasonable defaults for tool coverage
modules: Drop the .export_symbol section from the final modules
kconfig: use menu_list_for_each_sym() in sym_check_choice_deps()
kconfig: use sym_get_choice_menu() in conf_write_defconfig()
kconfig: add sym_get_choice_menu() helper
kconfig: turn defaults and additional prompt for choice members into error
kconfig: turn missing prompt for choice members into error
kconfig: turn conf_choice() into void function
kconfig: use linked list in sym_set_changed()
kconfig: gconf: use MENU_CHANGED instead of SYMBOL_CHANGED
kconfig: gconf: remove debug code
...
|
||
|
Linus Torvalds
|
0cc6f45cec |
IOMMU Updates for Linux v6.10
Including:
- Core:
- IOMMU memory usage observability - This will make the memory used
for IO page tables explicitly visible.
- Simplify arch_setup_dma_ops()
- Intel VT-d:
- Consolidate domain cache invalidation
- Remove private data from page fault message
- Allocate DMAR fault interrupts locally
- Cleanup and refactoring
- ARM-SMMUv2:
- Support for fault debugging hardware on Qualcomm implementations
- Re-land support for the ->domain_alloc_paging() callback
- ARM-SMMUv3:
- Improve handling of MSI allocation failure
- Drop support for the "disable_bypass" cmdline option
- Major rework of the CD creation code, following on directly from the
STE rework merged last time around.
- Add unit tests for the new STE/CD manipulation logic
- AMD-Vi:
- Final part of SVA changes with generic IO page fault handling
- Renesas IPMMU:
- Add support for R8A779H0 hardware
- A couple smaller fixes and updates across the sub-tree
-----BEGIN PGP SIGNATURE-----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=JUzp
-----END PGP SIGNATURE-----
Merge tag 'iommu-updates-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu updates from Joerg Roedel:
"Core:
- IOMMU memory usage observability - This will make the memory used
for IO page tables explicitly visible.
- Simplify arch_setup_dma_ops()
Intel VT-d:
- Consolidate domain cache invalidation
- Remove private data from page fault message
- Allocate DMAR fault interrupts locally
- Cleanup and refactoring
ARM-SMMUv2:
- Support for fault debugging hardware on Qualcomm implementations
- Re-land support for the ->domain_alloc_paging() callback
ARM-SMMUv3:
- Improve handling of MSI allocation failure
- Drop support for the "disable_bypass" cmdline option
- Major rework of the CD creation code, following on directly from
the STE rework merged last time around.
- Add unit tests for the new STE/CD manipulation logic
AMD-Vi:
- Final part of SVA changes with generic IO page fault handling
Renesas IPMMU:
- Add support for R8A779H0 hardware
... and a couple smaller fixes and updates across the sub-tree"
* tag 'iommu-updates-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (80 commits)
iommu/arm-smmu-v3: Make the kunit into a module
arm64: Properly clean up iommu-dma remnants
iommu/amd: Enable Guest Translation after reading IOMMU feature register
iommu/vt-d: Decouple igfx_off from graphic identity mapping
iommu/amd: Fix compilation error
iommu/arm-smmu-v3: Add unit tests for arm_smmu_write_entry
iommu/arm-smmu-v3: Build the whole CD in arm_smmu_make_s1_cd()
iommu/arm-smmu-v3: Move the CD generation for SVA into a function
iommu/arm-smmu-v3: Allocate the CD table entry in advance
iommu/arm-smmu-v3: Make arm_smmu_alloc_cd_ptr()
iommu/arm-smmu-v3: Consolidate clearing a CD table entry
iommu/arm-smmu-v3: Move the CD generation for S1 domains into a function
iommu/arm-smmu-v3: Make CD programming use arm_smmu_write_entry()
iommu/arm-smmu-v3: Add an ops indirection to the STE code
iommu/arm-smmu-qcom: Don't build debug features as a kernel module
iommu/amd: Add SVA domain support
iommu: Add ops->domain_alloc_sva()
iommu/amd: Initial SVA support for AMD IOMMU
iommu/amd: Add support for enable/disable IOPF
iommu/amd: Add IO page fault notifier handler
...
|
||
|
Linus Torvalds
|
70a663205d |
Probes updates for v6.10:
- tracing/probes: Adding new pseudo-types %pd and %pD support for dumping
dentry name from 'struct dentry *' and file name from 'struct file *'.
- uprobes: Some performance optimizations have been done.
. Speed up the BPF uprobe event by delaying the fetching of the uprobe
event arguments that are not used in BPF.
. Avoid locking by speculatively checking whether uprobe event is valid.
. Reduce lock contention by using read/write_lock instead of spinlock for
uprobe list operation. This improved BPF uprobe benchmark result 43% on
average.
- rethook: Removes non-fatal warning messages when tracing stack from BPF
and skip rcu_is_watching() validation in rethook if possible.
- objpool: Optimizing objpool (which is used by kretprobes and fprobe as
rethook backend storage) by inlining functions and avoid caching nr_cpu_ids
because it is a const value.
- fprobe: Add entry/exit callbacks types (code cleanup)
- kprobes: Check ftrace was killed in kprobes if it uses ftrace.
-----BEGIN PGP SIGNATURE-----
iQFPBAABCgA5FiEEh7BulGwFlgAOi5DV2/sHvwUrPxsFAmZFUxsbHG1hc2FtaS5o
aXJhbWF0c3VAZ21haWwuY29tAAoJENv7B78FKz8b+fIH/A96/SeC5WRLhXmHfTCM
IvKUea2n0b0oV/2pVfHqfkCBTICuUZ97Opd9VH9jLtjBOTh0fUOGZ2DNVGdSYfWm
IIkS5dhuZxHXrSHEVYykwLHI3AOL7Q6Ny9EmOg1CNMidUkPMNtBvppsBYPlFU/B/
qQJAvOdkVOnNITCaas0+MNgepoVVKdJzdNQ1I4WrGyG8isCZBaCYKo2QcGyheCNN
y8NXvnVHgmgHQ8nTaeE5AawclFzFnhwHfPQPe1kiyGrx15b8K+VYmaZxPKv33A1a
KT3TKJ1Ep7s7iWFh2iPVJzIwOXCmSnvNTKfNx/MDuKtO7UVfFwytoMEaekbmv3bG
VqM=
=n/mW
-----END PGP SIGNATURE-----
Merge tag 'probes-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull probes updates from Masami Hiramatsu:
- tracing/probes: Add new pseudo-types %pd and %pD support for dumping
dentry name from 'struct dentry *' and file name from 'struct file *'
- uprobes performance optimizations:
- Speed up the BPF uprobe event by delaying the fetching of the
uprobe event arguments that are not used in BPF
- Avoid locking by speculatively checking whether uprobe event is
valid
- Reduce lock contention by using read/write_lock instead of
spinlock for uprobe list operation. This improved BPF uprobe
benchmark result 43% on average
- rethook: Remove non-fatal warning messages when tracing stack from
BPF and skip rcu_is_watching() validation in rethook if possible
- objpool: Optimize objpool (which is used by kretprobes and fprobe as
rethook backend storage) by inlining functions and avoid caching
nr_cpu_ids because it is a const value
- fprobe: Add entry/exit callbacks types (code cleanup)
- kprobes: Check ftrace was killed in kprobes if it uses ftrace
* tag 'probes-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
kprobe/ftrace: bail out if ftrace was killed
selftests/ftrace: Fix required features for VFS type test case
objpool: cache nr_possible_cpus() and avoid caching nr_cpu_ids
objpool: enable inlining objpool_push() and objpool_pop() operations
rethook: honor CONFIG_FTRACE_VALIDATE_RCU_IS_WATCHING in rethook_try_get()
ftrace: make extra rcu_is_watching() validation check optional
uprobes: reduce contention on uprobes_tree access
rethook: Remove warning messages printed for finding return address of a frame.
fprobe: Add entry/exit callbacks types
selftests/ftrace: add fprobe test cases for VFS type "%pd" and "%pD"
selftests/ftrace: add kprobe test cases for VFS type "%pd" and "%pD"
Documentation: tracing: add new type '%pd' and '%pD' for kprobe
tracing/probes: support '%pD' type for print struct file's name
tracing/probes: support '%pd' type for print struct dentry's name
uprobes: add speculative lockless system-wide uprobe filter check
uprobes: prepare uprobe args buffer lazily
uprobes: encapsulate preparation of uprobe args buffer
|
||
|
Samuel Holland
|
ad5643cf2f
|
riscv: Define TASK_SIZE_MAX for __access_ok()
TASK_SIZE_MAX should be set to a constant value, at least the largest valid userspace address under any runtime configuration. This optimizes the check in __access_ok(), which no longer needs to compute the runtime value of TASK_SIZE. The check does not need to be exact, as long as it accepts all valid userspace addresses and rejects all valid kernel addresses; well-behaved programs will never fail the access_ok() check. For RISC-V, which requires all virtual addresses to be sign extended, the optimal choice is LONG_MAX because it simplifies the limit comparison to a sign bit test. This removes about half of the references to pgtable_l[45]_enabled. Signed-off-by: Samuel Holland <samuel.holland@sifive.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com> Link: https://lore.kernel.org/r/20240327143858.711792-3-samuel.holland@sifive.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com> |
||
|
Samuel Holland
|
9ad6bb3298
|
riscv: Remove PGDIR_SIZE_L3 and TASK_SIZE_MIN
TASK_SIZE_MIN is unused since commit
|
||
Stephen Brennan
|
1a7d0890dd |
kprobe/ftrace: bail out if ftrace was killed
If an error happens in ftrace, ftrace_kill() will prevent disarming kprobes. Eventually, the ftrace_ops associated with the kprobes will be freed, yet the kprobes will still be active, and when triggered, they will use the freed memory, likely resulting in a page fault and panic. This behavior can be reproduced quite easily, by creating a kprobe and then triggering a ftrace_kill(). For simplicity, we can simulate an ftrace error with a kernel module like [1]: [1]: https://github.com/brenns10/kernel_stuff/tree/master/ftrace_killer sudo perf probe --add commit_creds sudo perf trace -e probe:commit_creds # In another terminal make sudo insmod ftrace_killer.ko # calls ftrace_kill(), simulating bug # Back to perf terminal # ctrl-c sudo perf probe --del commit_creds After a short period, a page fault and panic would occur as the kprobe continues to execute and uses the freed ftrace_ops. While ftrace_kill() is supposed to be used only in extreme circumstances, it is invoked in FTRACE_WARN_ON() and so there are many places where an unexpected bug could be triggered, yet the system may continue operating, possibly without the administrator noticing. If ftrace_kill() does not panic the system, then we should do everything we can to continue operating, rather than leave a ticking time bomb. Link: https://lore.kernel.org/all/20240501162956.229427-1-stephen.s.brennan@oracle.com/ Signed-off-by: Stephen Brennan <stephen.s.brennan@oracle.com> Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> Acked-by: Guo Ren <guoren@kernel.org> Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> |
||
|
Linus Torvalds
|
f4b0c4b508 |
ARM:
* Move a lot of state that was previously stored on a per vcpu
basis into a per-CPU area, because it is only pertinent to the
host while the vcpu is loaded. This results in better state
tracking, and a smaller vcpu structure.
* Add full handling of the ERET/ERETAA/ERETAB instructions in
nested virtualisation. The last two instructions also require
emulating part of the pointer authentication extension.
As a result, the trap handling of pointer authentication has
been greatly simplified.
* Turn the global (and not very scalable) LPI translation cache
into a per-ITS, scalable cache, making non directly injected
LPIs much cheaper to make visible to the vcpu.
* A batch of pKVM patches, mostly fixes and cleanups, as the
upstreaming process seems to be resuming. Fingers crossed!
* Allocate PPIs and SGIs outside of the vcpu structure, allowing
for smaller EL2 mapping and some flexibility in implementing
more or less than 32 private IRQs.
* Purge stale mpidr_data if a vcpu is created after the MPIDR
map has been created.
* Preserve vcpu-specific ID registers across a vcpu reset.
* Various minor cleanups and improvements.
LoongArch:
* Add ParaVirt IPI support.
* Add software breakpoint support.
* Add mmio trace events support.
RISC-V:
* Support guest breakpoints using ebreak
* Introduce per-VCPU mp_state_lock and reset_cntx_lock
* Virtualize SBI PMU snapshot and counter overflow interrupts
* New selftests for SBI PMU and Guest ebreak
* Some preparatory work for both TDX and SNP page fault handling.
This also cleans up the page fault path, so that the priorities
of various kinds of fauls (private page, no memory, write
to read-only slot, etc.) are easier to follow.
x86:
* Minimize amount of time that shadow PTEs remain in the special
REMOVED_SPTE state. This is a state where the mmu_lock is held for
reading but concurrent accesses to the PTE have to spin; shortening
its use allows other vCPUs to repopulate the zapped region while
the zapper finishes tearing down the old, defunct page tables.
* Advertise the max mappable GPA in the "guest MAXPHYADDR" CPUID field,
which is defined by hardware but left for software use. This lets KVM
communicate its inability to map GPAs that set bits 51:48 on hosts
without 5-level nested page tables. Guest firmware is expected to
use the information when mapping BARs; this avoids that they end up at
a legal, but unmappable, GPA.
* Fixed a bug where KVM would not reject accesses to MSR that aren't
supposed to exist given the vCPU model and/or KVM configuration.
* As usual, a bunch of code cleanups.
x86 (AMD):
* Implement a new and improved API to initialize SEV and SEV-ES VMs, which
will also be extendable to SEV-SNP. The new API specifies the desired
encryption in KVM_CREATE_VM and then separately initializes the VM.
The new API also allows customizing the desired set of VMSA features;
the features affect the measurement of the VM's initial state, and
therefore enabling them cannot be done tout court by the hypervisor.
While at it, the new API includes two bugfixes that couldn't be
applied to the old one without a flag day in userspace or without
affecting the initial measurement. When a SEV-ES VM is created with
the new VM type, KVM_GET_REGS/KVM_SET_REGS and friends are
rejected once the VMSA has been encrypted. Also, the FPU and AVX
state will be synchronized and encrypted too.
* Support for GHCB version 2 as applicable to SEV-ES guests. This, once
more, is only accessible when using the new KVM_SEV_INIT2 flow for
initialization of SEV-ES VMs.
x86 (Intel):
* An initial bunch of prerequisite patches for Intel TDX were merged.
They generally don't do anything interesting. The only somewhat user
visible change is a new debugging mode that checks that KVM's MMU
never triggers a #VE virtualization exception in the guest.
* Clear vmcs.EXIT_QUALIFICATION when synthesizing an EPT Misconfig VM-Exit to
L1, as per the SDM.
Generic:
* Use vfree() instead of kvfree() for allocations that always use vcalloc()
or __vcalloc().
* Remove .change_pte() MMU notifier - the changes to non-KVM code are
small and Andrew Morton asked that I also take those through the KVM
tree. The callback was only ever implemented by KVM (which was also the
original user of MMU notifiers) but it had been nonfunctional ever since
calls to set_pte_at_notify were wrapped with invalidate_range_start
and invalidate_range_end... in 2012.
Selftests:
* Enhance the demand paging test to allow for better reporting and stressing
of UFFD performance.
* Convert the steal time test to generate TAP-friendly output.
* Fix a flaky false positive in the xen_shinfo_test due to comparing elapsed
time across two different clock domains.
* Skip the MONITOR/MWAIT test if the host doesn't actually support MWAIT.
* Avoid unnecessary use of "sudo" in the NX hugepage test wrapper shell
script, to play nice with running in a minimal userspace environment.
* Allow skipping the RSEQ test's sanity check that the vCPU was able to
complete a reasonable number of KVM_RUNs, as the assert can fail on a
completely valid setup. If the test is run on a large-ish system that is
otherwise idle, and the test isn't affined to a low-ish number of CPUs, the
vCPU task can be repeatedly migrated to CPUs that are in deep sleep states,
which results in the vCPU having very little net runtime before the next
migration due to high wakeup latencies.
* Define _GNU_SOURCE for all selftests to fix a warning that was introduced by
a change to kselftest_harness.h late in the 6.9 cycle, and because forcing
every test to #define _GNU_SOURCE is painful.
* Provide a global pseudo-RNG instance for all tests, so that library code can
generate random, but determinstic numbers.
* Use the global pRNG to randomly force emulation of select writes from guest
code on x86, e.g. to help validate KVM's emulation of locked accesses.
* Allocate and initialize x86's GDT, IDT, TSS, segments, and default exception
handlers at VM creation, instead of forcing tests to manually trigger the
related setup.
Documentation:
* Fix a goof in the KVM_CREATE_GUEST_MEMFD documentation.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmZE878UHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroOukQf+LcvZsWtrC7Wd5K9SQbYXaS4Rk6P6
JHoQW2d0hUN893J2WibEw+l1J/0vn5JumqHXyZgJ7CbaMtXkWWQTwDSDLuURUKpv
XNB3Sb17G87NH+s1tOh0tA9h5upbtlHVHvrtIwdbb9+XHgQ6HTL4uk+HdfO/p9fW
cWBEZAKoWcCIa99Numv3pmq5vdrvBlNggwBugBS8TH69EKMw+V1Vu1SFkIdNDTQk
NJJ28cohoP3wnwlIHaXSmU4RujipPH3Lm/xupyA5MwmzO713eq2yUqV49jzhD5/I
MA4Ruvgrdm4wpp89N9lQMyci91u6q7R9iZfMu0tSg2qYI3UPKIdstd8sOA==
=2lED
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM updates from Paolo Bonzini:
"ARM:
- Move a lot of state that was previously stored on a per vcpu basis
into a per-CPU area, because it is only pertinent to the host while
the vcpu is loaded. This results in better state tracking, and a
smaller vcpu structure.
- Add full handling of the ERET/ERETAA/ERETAB instructions in nested
virtualisation. The last two instructions also require emulating
part of the pointer authentication extension. As a result, the trap
handling of pointer authentication has been greatly simplified.
- Turn the global (and not very scalable) LPI translation cache into
a per-ITS, scalable cache, making non directly injected LPIs much
cheaper to make visible to the vcpu.
- A batch of pKVM patches, mostly fixes and cleanups, as the
upstreaming process seems to be resuming. Fingers crossed!
- Allocate PPIs and SGIs outside of the vcpu structure, allowing for
smaller EL2 mapping and some flexibility in implementing more or
less than 32 private IRQs.
- Purge stale mpidr_data if a vcpu is created after the MPIDR map has
been created.
- Preserve vcpu-specific ID registers across a vcpu reset.
- Various minor cleanups and improvements.
LoongArch:
- Add ParaVirt IPI support
- Add software breakpoint support
- Add mmio trace events support
RISC-V:
- Support guest breakpoints using ebreak
- Introduce per-VCPU mp_state_lock and reset_cntx_lock
- Virtualize SBI PMU snapshot and counter overflow interrupts
- New selftests for SBI PMU and Guest ebreak
- Some preparatory work for both TDX and SNP page fault handling.
This also cleans up the page fault path, so that the priorities of
various kinds of fauls (private page, no memory, write to read-only
slot, etc.) are easier to follow.
x86:
- Minimize amount of time that shadow PTEs remain in the special
REMOVED_SPTE state.
This is a state where the mmu_lock is held for reading but
concurrent accesses to the PTE have to spin; shortening its use
allows other vCPUs to repopulate the zapped region while the zapper
finishes tearing down the old, defunct page tables.
- Advertise the max mappable GPA in the "guest MAXPHYADDR" CPUID
field, which is defined by hardware but left for software use.
This lets KVM communicate its inability to map GPAs that set bits
51:48 on hosts without 5-level nested page tables. Guest firmware
is expected to use the information when mapping BARs; this avoids
that they end up at a legal, but unmappable, GPA.
- Fixed a bug where KVM would not reject accesses to MSR that aren't
supposed to exist given the vCPU model and/or KVM configuration.
- As usual, a bunch of code cleanups.
x86 (AMD):
- Implement a new and improved API to initialize SEV and SEV-ES VMs,
which will also be extendable to SEV-SNP.
The new API specifies the desired encryption in KVM_CREATE_VM and
then separately initializes the VM. The new API also allows
customizing the desired set of VMSA features; the features affect
the measurement of the VM's initial state, and therefore enabling
them cannot be done tout court by the hypervisor.
While at it, the new API includes two bugfixes that couldn't be
applied to the old one without a flag day in userspace or without
affecting the initial measurement. When a SEV-ES VM is created with
the new VM type, KVM_GET_REGS/KVM_SET_REGS and friends are rejected
once the VMSA has been encrypted. Also, the FPU and AVX state will
be synchronized and encrypted too.
- Support for GHCB version 2 as applicable to SEV-ES guests.
This, once more, is only accessible when using the new
KVM_SEV_INIT2 flow for initialization of SEV-ES VMs.
x86 (Intel):
- An initial bunch of prerequisite patches for Intel TDX were merged.
They generally don't do anything interesting. The only somewhat
user visible change is a new debugging mode that checks that KVM's
MMU never triggers a #VE virtualization exception in the guest.
- Clear vmcs.EXIT_QUALIFICATION when synthesizing an EPT Misconfig
VM-Exit to L1, as per the SDM.
Generic:
- Use vfree() instead of kvfree() for allocations that always use
vcalloc() or __vcalloc().
- Remove .change_pte() MMU notifier - the changes to non-KVM code are
small and Andrew Morton asked that I also take those through the
KVM tree.
The callback was only ever implemented by KVM (which was also the
original user of MMU notifiers) but it had been nonfunctional ever
since calls to set_pte_at_notify were wrapped with
invalidate_range_start and invalidate_range_end... in 2012.
Selftests:
- Enhance the demand paging test to allow for better reporting and
stressing of UFFD performance.
- Convert the steal time test to generate TAP-friendly output.
- Fix a flaky false positive in the xen_shinfo_test due to comparing
elapsed time across two different clock domains.
- Skip the MONITOR/MWAIT test if the host doesn't actually support
MWAIT.
- Avoid unnecessary use of "sudo" in the NX hugepage test wrapper
shell script, to play nice with running in a minimal userspace
environment.
- Allow skipping the RSEQ test's sanity check that the vCPU was able
to complete a reasonable number of KVM_RUNs, as the assert can fail
on a completely valid setup.
If the test is run on a large-ish system that is otherwise idle,
and the test isn't affined to a low-ish number of CPUs, the vCPU
task can be repeatedly migrated to CPUs that are in deep sleep
states, which results in the vCPU having very little net runtime
before the next migration due to high wakeup latencies.
- Define _GNU_SOURCE for all selftests to fix a warning that was
introduced by a change to kselftest_harness.h late in the 6.9
cycle, and because forcing every test to #define _GNU_SOURCE is
painful.
- Provide a global pseudo-RNG instance for all tests, so that library
code can generate random, but determinstic numbers.
- Use the global pRNG to randomly force emulation of select writes
from guest code on x86, e.g. to help validate KVM's emulation of
locked accesses.
- Allocate and initialize x86's GDT, IDT, TSS, segments, and default
exception handlers at VM creation, instead of forcing tests to
manually trigger the related setup.
Documentation:
- Fix a goof in the KVM_CREATE_GUEST_MEMFD documentation"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (225 commits)
selftests/kvm: remove dead file
KVM: selftests: arm64: Test vCPU-scoped feature ID registers
KVM: selftests: arm64: Test that feature ID regs survive a reset
KVM: selftests: arm64: Store expected register value in set_id_regs
KVM: selftests: arm64: Rename helper in set_id_regs to imply VM scope
KVM: arm64: Only reset vCPU-scoped feature ID regs once
KVM: arm64: Reset VM feature ID regs from kvm_reset_sys_regs()
KVM: arm64: Rename is_id_reg() to imply VM scope
KVM: arm64: Destroy mpidr_data for 'late' vCPU creation
KVM: arm64: Use hVHE in pKVM by default on CPUs with VHE support
KVM: arm64: Fix hvhe/nvhe early alias parsing
KVM: SEV: Allow per-guest configuration of GHCB protocol version
KVM: SEV: Add GHCB handling for termination requests
KVM: SEV: Add GHCB handling for Hypervisor Feature Support requests
KVM: SEV: Add support to handle AP reset MSR protocol
KVM: x86: Explicitly zero kvm_caps during vendor module load
KVM: x86: Fully re-initialize supported_mce_cap on vendor module load
KVM: x86: Fully re-initialize supported_vm_types on vendor module load
KVM: x86/mmu: Sanity check that __kvm_faultin_pfn() doesn't create noslot pfns
KVM: x86/mmu: Initialize kvm_page_fault's pfn and hva to error values
...
|
||
|
Linus Torvalds
|
a49468240e |
Modules changes for v6.10-rc1
Finally something fun. Mike Rapoport does some cleanup to allow us to
take out module_alloc() out of modules into a new paint shedded execmem_alloc()
and execmem_free() so to make emphasis these helpers are actually used outside
of modules. It starts with a no-functional changes API rename / placeholders
to then allow architectures to define their requirements into a new shiny
struct execmem_info with ranges, and requirements for those ranges. Archs
now can intitialize this execmem_info as the last part of mm_core_init() if
they have to diverge from the norm. Each range is a known type clearly
articulated and spelled out in enum execmem_type.
Although a lot of this is major cleanup and prep work for future enhancements an
immediate clear gain is we get to enable KPROBES without MODULES now. That is
ultimately what motiviated to pick this work up again, now with smaller goal as
concrete stepping stone.
This has been sitting on linux-next for a little less than a month, a few issues
were found already and fixed, in particular an odd mips boot issue. Arch folks
reviewed the code too. This is ready for wider exposure and testing.
-----BEGIN PGP SIGNATURE-----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=Nsg4
-----END PGP SIGNATURE-----
Merge tag 'modules-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux
Pull modules updates from Luis Chamberlain:
"Finally something fun. Mike Rapoport does some cleanup to allow us to
take out module_alloc() out of modules into a new paint shedded
execmem_alloc() and execmem_free() so to make emphasis these helpers
are actually used outside of modules.
It starts with a non-functional changes API rename / placeholders to
then allow architectures to define their requirements into a new shiny
struct execmem_info with ranges, and requirements for those ranges.
Archs now can intitialize this execmem_info as the last part of
mm_core_init() if they have to diverge from the norm. Each range is a
known type clearly articulated and spelled out in enum execmem_type.
Although a lot of this is major cleanup and prep work for future
enhancements an immediate clear gain is we get to enable KPROBES
without MODULES now. That is ultimately what motiviated to pick this
work up again, now with smaller goal as concrete stepping stone"
* tag 'modules-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux:
bpf: remove CONFIG_BPF_JIT dependency on CONFIG_MODULES of
kprobes: remove dependency on CONFIG_MODULES
powerpc: use CONFIG_EXECMEM instead of CONFIG_MODULES where appropriate
x86/ftrace: enable dynamic ftrace without CONFIG_MODULES
arch: make execmem setup available regardless of CONFIG_MODULES
powerpc: extend execmem_params for kprobes allocations
arm64: extend execmem_info for generated code allocations
riscv: extend execmem_params for generated code allocations
mm/execmem, arch: convert remaining overrides of module_alloc to execmem
mm/execmem, arch: convert simple overrides of module_alloc to execmem
mm: introduce execmem_alloc() and execmem_free()
module: make module_memory_{alloc,free} more self-contained
sparc: simplify module_alloc()
nios2: define virtual address space for modules
mips: module: rename MODULE_START to MODULES_VADDR
arm64: module: remove unneeded call to kasan_alloc_module_shadow()
kallsyms: replace deprecated strncpy with strscpy
module: allow UNUSED_KSYMS_WHITELIST to be relative against objtree.
|
||
|
Linus Torvalds
|
a19264d086 |
printk changes for 6.10
-----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEESH4wyp42V4tXvYsjUqAMR0iAlPIFAmZEh6AACgkQUqAMR0iA lPJzFw/+PCKHOFI1Z5Aj9negx97sYKAIuJrY9pFQfaxVUBzqZgIEXB/rkn4yurad KpK1UppMnLset+GLm+95+BTyP7G256q2jhWZ9u55i089YGrUKcibp+Jy9cCO02r5 1c0+ZkyMxONgPnE+WcOW7B5p34cie6NFdvqrRzrW5WB4eLaGs3ksBow2j3jXWTii aOrsPPZWmT6wEJd4Hm1kZIgnz8gmlsm+VGTSHjjEvWWtvh5garKxCQ3COmdw1WAc dL+YjYqTIOQsifJeOpECy8+hZA4uoKpw2dWxfdHEH7F8RkhdumQdWxiGON+KXwXA cG1rIaas0gGvVpcvja/bPiATwzqTmXlGAHlrwiDEeiNqh/VckinDw/S82QdIVTii qttE2yv8cAVCpsk8GVjuE7unZREc0Ao2tAIz3on7dzFgVGVsK3mJBGAiqVJWDA/A 3jlFsMoM899IJJ8Fvg0rcu/vkwE4ViiQCurcPgWWqPicHC310PSJ6O0cImbBsL+U kQxpkpEUnlgiDy19vKzhHlGR89xxLUxIiq78TRCYrM+NQ4PCvdGQMHe/Wm5EfhPx bgzYcNsWjmN4fzokIl+a641wvTCqiUmUqoy7TU+a8a2ssBNaVrHubMrJzkl2OLts miLz0xXG+RZA0Z1FNqy3+3EyxoGmUJqjM9jomDAxPvMvrNQjMHA= =y45P -----END PGP SIGNATURE----- Merge tag 'printk-for-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux Pull printk updates from Petr Mladek: - Use no_printk() instead of "if (0) printk()" constructs to avoid generating printk index for messages disabled at compile time - Remove deprecated strncpy/strcpy from printk.c - Remove redundant CONFIG_BASE_FULL in favor of CONFIG_BASE_SMALL * tag 'printk-for-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux: printk: cleanup deprecated uses of strncpy/strcpy printk: Remove redundant CONFIG_BASE_FULL printk: Change type of CONFIG_BASE_SMALL to bool printk: Fix LOG_CPU_MAX_BUF_SHIFT when BASE_SMALL is enabled ceph: Use no_printk() helper dyndbg: Use *no_printk() helpers dev_printk: Add and use dev_no_printk() printk: Let no_printk() use _printk() |
||
|
Linus Torvalds
|
1b294a1f35 |
Networking changes for 6.10.
Core & protocols
----------------
- Complete rework of garbage collection of AF_UNIX sockets.
AF_UNIX is prone to forming reference count cycles due to fd passing
functionality. New method based on Tarjan's Strongly Connected Components
algorithm should be both faster and remove a lot of workarounds
we accumulated over the years.
- Add TCP fraglist GRO support, allowing chaining multiple TCP packets
and forwarding them together. Useful for small switches / routers which
lack basic checksum offload in some scenarios (e.g. PPPoE).
- Support using SMP threads for handling packet backlog i.e. packet
processing from software interfaces and old drivers which don't
use NAPI. This helps move the processing out of the softirq jumble.
- Continue work of converting from rtnl lock to RCU protection.
Don't require rtnl lock when reading: IPv6 routing FIB, IPv6 address
labels, netdev threaded NAPI sysfs files, bonding driver's sysfs files,
MPLS devconf, IPv4 FIB rules, netns IDs, tcp metrics, TC Qdiscs,
neighbor entries, ARP entries via ioctl(SIOCGARP), a lot of the link
information available via rtnetlink.
- Small optimizations from Eric to UDP wake up handling, memory accounting,
RPS/RFS implementation, TCP packet sizing etc.
- Allow direct page recycling in the bulk API used by XDP, for +2% PPS.
- Support peek with an offset on TCP sockets.
- Add MPTCP APIs for querying last time packets were received/sent/acked,
and whether MPTCP "upgrade" succeeded on a TCP socket.
- Add intra-node communication shortcut to improve SMC performance.
- Add IPv6 (and IPv{4,6}-over-IPv{4,6}) support to the GTP protocol driver.
- Add HSR-SAN (RedBOX) mode of operation to the HSR protocol driver.
- Add reset reasons for tracing what caused a TCP reset to be sent.
- Introduce direction attribute for xfrm (IPSec) states.
State can be used either for input or output packet processing.
Things we sprinkled into general kernel code
--------------------------------------------
- Add bitmap_{read,write}(), bitmap_size(), expose BYTES_TO_BITS().
This required touch-ups and renaming of a few existing users.
- Add Endian-dependent __counted_by_{le,be} annotations.
- Make building selftests "quieter" by printing summaries like
"CC object.o" rather than full commands with all the arguments.
Netfilter
---------
- Use GFP_KERNEL to clone elements, to deal better with OOM situations
and avoid failures in the .commit step.
BPF
---
- Add eBPF JIT for ARCv2 CPUs.
- Support attaching kprobe BPF programs through kprobe_multi link in
a session mode, meaning, a BPF program is attached to both function entry
and return, the entry program can decide if the return program gets
executed and the entry program can share u64 cookie value with return
program. "Session mode" is a common use-case for tetragon and bpftrace.
- Add the ability to specify and retrieve BPF cookie for raw tracepoint
programs in order to ease migration from classic to raw tracepoints.
- Add an internal-only BPF per-CPU instruction for resolving per-CPU
memory addresses and implement support in x86, ARM64 and RISC-V JITs.
This allows inlining functions which need to access per-CPU state.
- Optimize x86 BPF JIT's emit_mov_imm64, and add support for various
atomics in bpf_arena which can be JITed as a single x86 instruction.
Support BPF arena on ARM64.
- Add a new bpf_wq API for deferring events and refactor process-context
bpf_timer code to keep common code where possible.
- Harden the BPF verifier's and/or/xor value tracking.
- Introduce crypto kfuncs to let BPF programs call kernel crypto APIs.
- Support bpf_tail_call_static() helper for BPF programs with GCC 13.
- Add bpf_preempt_{disable,enable}() kfuncs in order to allow a BPF
program to have code sections where preemption is disabled.
Driver API
----------
- Skip software TC processing completely if all installed rules are
marked as HW-only, instead of checking the HW-only flag rule by rule.
- Add support for configuring PoE (Power over Ethernet), similar to
the already existing support for PoDL (Power over Data Line) config.
- Initial bits of a queue control API, for now allowing a single queue
to be reset without disturbing packet flow to other queues.
- Common (ethtool) statistics for hardware timestamping.
Tests and tooling
-----------------
- Remove the need to create a config file to run the net forwarding tests
so that a naive "make run_tests" can exercise them.
- Define a method of writing tests which require an external endpoint
to communicate with (to send/receive data towards the test machine).
Add a few such tests.
- Create a shared code library for writing Python tests. Expose the YAML
Netlink library from tools/ to the tests for easy Netlink access.
- Move netfilter tests under net/, extend them, separate performance tests
from correctness tests, and iron out issues found by running them
"on every commit".
- Refactor BPF selftests to use common network helpers.
- Further work filling in YAML definitions of Netlink messages for:
nftables, team driver, bonding interfaces, vlan interfaces, VF info,
TC u32 mark, TC police action.
- Teach Python YAML Netlink to decode attribute policies.
- Extend the definition of the "indexed array" construct in the specs
to cover arrays of scalars rather than just nests.
- Add hyperlinks between definitions in generated Netlink docs.
Drivers
-------
- Make sure unsupported flower control flags are rejected by drivers,
and make more drivers report errors directly to the application rather
than dmesg (large number of driver changes from Asbjørn Sloth Tønnesen).
- Ethernet high-speed NICs:
- Broadcom (bnxt):
- support multiple RSS contexts and steering traffic to them
- support XDP metadata
- make page pool allocations more NUMA aware
- Intel (100G, ice, idpf):
- extract datapath code common among Intel drivers into a library
- use fewer resources in switchdev by sharing queues with the PF
- add PFCP filter support
- add Ethernet filter support
- use a spinlock instead of HW lock in PTP clock ops
- support 5 layer Tx scheduler topology
- nVidia/Mellanox:
- 800G link modes and 100G SerDes speeds
- per-queue IRQ coalescing configuration
- Marvell Octeon:
- support offloading TC packet mark action
- Ethernet NICs consumer, embedded and virtual:
- stop lying about skb->truesize in USB Ethernet drivers, it messes up
TCP memory calculations
- Google cloud vNIC:
- support changing ring size via ethtool
- support ring reset using the queue control API
- VirtIO net:
- expose flow hash from RSS to XDP
- per-queue statistics
- add selftests
- Synopsys (stmmac):
- support controllers which require an RX clock signal from the MII
bus to perform their hardware initialization
- TI:
- icssg_prueth: support ICSSG-based Ethernet on AM65x SR1.0 devices
- icssg_prueth: add SW TX / RX Coalescing based on hrtimers
- cpsw: minimal XDP support
- Renesas (ravb):
- support describing the MDIO bus
- Realtek (r8169):
- add support for RTL8168M
- Microchip Sparx5:
- matchall and flower actions mirred and redirect
- Ethernet switches:
- nVidia/Mellanox:
- improve events processing performance
- Marvell:
- add support for MV88E6250 family internal PHYs
- Microchip:
- add DCB and DSCP mapping support for KSZ switches
- vsc73xx: convert to PHYLINK
- Realtek:
- rtl8226b/rtl8221b: add C45 instances and SerDes switching
- Many driver changes related to PHYLIB and PHYLINK deprecated API cleanup.
- Ethernet PHYs:
- Add a new driver for Airoha EN8811H 2.5 Gigabit PHY.
- micrel: lan8814: add support for PPS out and external timestamp trigger
- WiFi:
- Disable Wireless Extensions (WEXT) in all Wi-Fi 7 devices drivers.
Modern devices can only be configured using nl80211.
- mac80211/cfg80211
- handle color change per link for WiFi 7 Multi-Link Operation
- Intel (iwlwifi):
- don't support puncturing in 5 GHz
- support monitor mode on passive channels
- BZ-W device support
- P2P with HE/EHT support
- re-add support for firmware API 90
- provide channel survey information for Automatic Channel Selection
- MediaTek (mt76):
- mt7921 LED control
- mt7925 EHT radiotap support
- mt7920e PCI support
- Qualcomm (ath11k):
- P2P support for QCA6390, WCN6855 and QCA2066
- support hibernation
- ieee80211-freq-limit Device Tree property support
- Qualcomm (ath12k):
- refactoring in preparation of multi-link support
- suspend and hibernation support
- ACPI support
- debugfs support, including dfs_simulate_radar support
- RealTek:
- rtw88: RTL8723CS SDIO device support
- rtw89: RTL8922AE Wi-Fi 7 PCI device support
- rtw89: complete features of new WiFi 7 chip 8922AE including
BT-coexistence and Wake-on-WLAN
- rtw89: use BIOS ACPI settings to set TX power and channels
- rtl8xxxu: enable Management Frame Protection (MFP) support
- Bluetooth:
- support for Intel BlazarI and Filmore Peak2 (BE201)
- support for MediaTek MT7921S SDIO
- initial support for Intel PCIe BT driver
- remove HCI_AMP support
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=EsC2
-----END PGP SIGNATURE-----
Merge tag 'net-next-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core & protocols:
- Complete rework of garbage collection of AF_UNIX sockets.
AF_UNIX is prone to forming reference count cycles due to fd
passing functionality. New method based on Tarjan's Strongly
Connected Components algorithm should be both faster and remove a
lot of workarounds we accumulated over the years.
- Add TCP fraglist GRO support, allowing chaining multiple TCP
packets and forwarding them together. Useful for small switches /
routers which lack basic checksum offload in some scenarios (e.g.
PPPoE).
- Support using SMP threads for handling packet backlog i.e. packet
processing from software interfaces and old drivers which don't use
NAPI. This helps move the processing out of the softirq jumble.
- Continue work of converting from rtnl lock to RCU protection.
Don't require rtnl lock when reading: IPv6 routing FIB, IPv6
address labels, netdev threaded NAPI sysfs files, bonding driver's
sysfs files, MPLS devconf, IPv4 FIB rules, netns IDs, tcp metrics,
TC Qdiscs, neighbor entries, ARP entries via ioctl(SIOCGARP), a lot
of the link information available via rtnetlink.
- Small optimizations from Eric to UDP wake up handling, memory
accounting, RPS/RFS implementation, TCP packet sizing etc.
- Allow direct page recycling in the bulk API used by XDP, for +2%
PPS.
- Support peek with an offset on TCP sockets.
- Add MPTCP APIs for querying last time packets were received/sent/acked
and whether MPTCP "upgrade" succeeded on a TCP socket.
- Add intra-node communication shortcut to improve SMC performance.
- Add IPv6 (and IPv{4,6}-over-IPv{4,6}) support to the GTP protocol
driver.
- Add HSR-SAN (RedBOX) mode of operation to the HSR protocol driver.
- Add reset reasons for tracing what caused a TCP reset to be sent.
- Introduce direction attribute for xfrm (IPSec) states. State can be
used either for input or output packet processing.
Things we sprinkled into general kernel code:
- Add bitmap_{read,write}(), bitmap_size(), expose BYTES_TO_BITS().
This required touch-ups and renaming of a few existing users.
- Add Endian-dependent __counted_by_{le,be} annotations.
- Make building selftests "quieter" by printing summaries like
"CC object.o" rather than full commands with all the arguments.
Netfilter:
- Use GFP_KERNEL to clone elements, to deal better with OOM
situations and avoid failures in the .commit step.
BPF:
- Add eBPF JIT for ARCv2 CPUs.
- Support attaching kprobe BPF programs through kprobe_multi link in
a session mode, meaning, a BPF program is attached to both function
entry and return, the entry program can decide if the return
program gets executed and the entry program can share u64 cookie
value with return program. "Session mode" is a common use-case for
tetragon and bpftrace.
- Add the ability to specify and retrieve BPF cookie for raw
tracepoint programs in order to ease migration from classic to raw
tracepoints.
- Add an internal-only BPF per-CPU instruction for resolving per-CPU
memory addresses and implement support in x86, ARM64 and RISC-V
JITs. This allows inlining functions which need to access per-CPU
state.
- Optimize x86 BPF JIT's emit_mov_imm64, and add support for various
atomics in bpf_arena which can be JITed as a single x86
instruction. Support BPF arena on ARM64.
- Add a new bpf_wq API for deferring events and refactor
process-context bpf_timer code to keep common code where possible.
- Harden the BPF verifier's and/or/xor value tracking.
- Introduce crypto kfuncs to let BPF programs call kernel crypto
APIs.
- Support bpf_tail_call_static() helper for BPF programs with GCC 13.
- Add bpf_preempt_{disable,enable}() kfuncs in order to allow a BPF
program to have code sections where preemption is disabled.
Driver API:
- Skip software TC processing completely if all installed rules are
marked as HW-only, instead of checking the HW-only flag rule by
rule.
- Add support for configuring PoE (Power over Ethernet), similar to
the already existing support for PoDL (Power over Data Line)
config.
- Initial bits of a queue control API, for now allowing a single
queue to be reset without disturbing packet flow to other queues.
- Common (ethtool) statistics for hardware timestamping.
Tests and tooling:
- Remove the need to create a config file to run the net forwarding
tests so that a naive "make run_tests" can exercise them.
- Define a method of writing tests which require an external endpoint
to communicate with (to send/receive data towards the test
machine). Add a few such tests.
- Create a shared code library for writing Python tests. Expose the
YAML Netlink library from tools/ to the tests for easy Netlink
access.
- Move netfilter tests under net/, extend them, separate performance
tests from correctness tests, and iron out issues found by running
them "on every commit".
- Refactor BPF selftests to use common network helpers.
- Further work filling in YAML definitions of Netlink messages for:
nftables, team driver, bonding interfaces, vlan interfaces, VF
info, TC u32 mark, TC police action.
- Teach Python YAML Netlink to decode attribute policies.
- Extend the definition of the "indexed array" construct in the specs
to cover arrays of scalars rather than just nests.
- Add hyperlinks between definitions in generated Netlink docs.
Drivers:
- Make sure unsupported flower control flags are rejected by drivers,
and make more drivers report errors directly to the application
rather than dmesg (large number of driver changes from Asbjørn
Sloth Tønnesen).
- Ethernet high-speed NICs:
- Broadcom (bnxt):
- support multiple RSS contexts and steering traffic to them
- support XDP metadata
- make page pool allocations more NUMA aware
- Intel (100G, ice, idpf):
- extract datapath code common among Intel drivers into a library
- use fewer resources in switchdev by sharing queues with the PF
- add PFCP filter support
- add Ethernet filter support
- use a spinlock instead of HW lock in PTP clock ops
- support 5 layer Tx scheduler topology
- nVidia/Mellanox:
- 800G link modes and 100G SerDes speeds
- per-queue IRQ coalescing configuration
- Marvell Octeon:
- support offloading TC packet mark action
- Ethernet NICs consumer, embedded and virtual:
- stop lying about skb->truesize in USB Ethernet drivers, it
messes up TCP memory calculations
- Google cloud vNIC:
- support changing ring size via ethtool
- support ring reset using the queue control API
- VirtIO net:
- expose flow hash from RSS to XDP
- per-queue statistics
- add selftests
- Synopsys (stmmac):
- support controllers which require an RX clock signal from the
MII bus to perform their hardware initialization
- TI:
- icssg_prueth: support ICSSG-based Ethernet on AM65x SR1.0 devices
- icssg_prueth: add SW TX / RX Coalescing based on hrtimers
- cpsw: minimal XDP support
- Renesas (ravb):
- support describing the MDIO bus
- Realtek (r8169):
- add support for RTL8168M
- Microchip Sparx5:
- matchall and flower actions mirred and redirect
- Ethernet switches:
- nVidia/Mellanox:
- improve events processing performance
- Marvell:
- add support for MV88E6250 family internal PHYs
- Microchip:
- add DCB and DSCP mapping support for KSZ switches
- vsc73xx: convert to PHYLINK
- Realtek:
- rtl8226b/rtl8221b: add C45 instances and SerDes switching
- Many driver changes related to PHYLIB and PHYLINK deprecated API
cleanup
- Ethernet PHYs:
- Add a new driver for Airoha EN8811H 2.5 Gigabit PHY.
- micrel: lan8814: add support for PPS out and external timestamp trigger
- WiFi:
- Disable Wireless Extensions (WEXT) in all Wi-Fi 7 devices
drivers. Modern devices can only be configured using nl80211.
- mac80211/cfg80211
- handle color change per link for WiFi 7 Multi-Link Operation
- Intel (iwlwifi):
- don't support puncturing in 5 GHz
- support monitor mode on passive channels
- BZ-W device support
- P2P with HE/EHT support
- re-add support for firmware API 90
- provide channel survey information for Automatic Channel Selection
- MediaTek (mt76):
- mt7921 LED control
- mt7925 EHT radiotap support
- mt7920e PCI support
- Qualcomm (ath11k):
- P2P support for QCA6390, WCN6855 and QCA2066
- support hibernation
- ieee80211-freq-limit Device Tree property support
- Qualcomm (ath12k):
- refactoring in preparation of multi-link support
- suspend and hibernation support
- ACPI support
- debugfs support, including dfs_simulate_radar support
- RealTek:
- rtw88: RTL8723CS SDIO device support
- rtw89: RTL8922AE Wi-Fi 7 PCI device support
- rtw89: complete features of new WiFi 7 chip 8922AE including
BT-coexistence and Wake-on-WLAN
- rtw89: use BIOS ACPI settings to set TX power and channels
- rtl8xxxu: enable Management Frame Protection (MFP) support
- Bluetooth:
- support for Intel BlazarI and Filmore Peak2 (BE201)
- support for MediaTek MT7921S SDIO
- initial support for Intel PCIe BT driver
- remove HCI_AMP support"
* tag 'net-next-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1827 commits)
selftests: netfilter: fix packetdrill conntrack testcase
net: gro: fix napi_gro_cb zeroed alignment
Bluetooth: btintel_pcie: Refactor and code cleanup
Bluetooth: btintel_pcie: Fix warning reported by sparse
Bluetooth: hci_core: Fix not handling hdev->le_num_of_adv_sets=1
Bluetooth: btintel: Fix compiler warning for multi_v7_defconfig config
Bluetooth: btintel_pcie: Fix compiler warnings
Bluetooth: btintel_pcie: Add *setup* function to download firmware
Bluetooth: btintel_pcie: Add support for PCIe transport
Bluetooth: btintel: Export few static functions
Bluetooth: HCI: Remove HCI_AMP support
Bluetooth: L2CAP: Fix div-by-zero in l2cap_le_flowctl_init()
Bluetooth: qca: Fix error code in qca_read_fw_build_info()
Bluetooth: hci_conn: Use __counted_by() and avoid -Wfamnae warning
Bluetooth: btintel: Add support for Filmore Peak2 (BE201)
Bluetooth: btintel: Add support for BlazarI
LE Create Connection command timeout increased to 20 secs
dt-bindings: net: bluetooth: Add MediaTek MT7921S SDIO Bluetooth
Bluetooth: compute LE flow credits based on recvbuf space
Bluetooth: hci_sync: Use cmd->num_cis instead of magic number
...
|
||
|
Linus Torvalds
|
6bfd2d442a |
Updates for the interrupt subsystem:
- Core code:
- Interrupt storm detection for the lockup watchdog:
Lockups which are caused by interrupt storms are not easy to debug
because there is no information about the events which make the lockup
detector trigger.
To make this more user friendly, provide an extenstion to interrupt
statistics which allows to take snapshots and an interface to retrieve
the delta to the snapshot. Use this new mechanism in the watchdog code
to do a two stage lockup analysis by taking the snapshot and printing
the deltas for the topmost active interrupts on the second trigger.
Note: This contains both the interrupt and the watchdog changes as
the latter depend on the former obviously.
- Avoid summation loops in the /proc/interrupts output and use the global
counter when possible
- Skip suspended interrupts on CPU hotplug operations to ensure that they
are not delivered before the system resumes the device drivers when
coming out of suspend.
- On CPU hot-unplug interrupts which are affine to the outgoing CPU are
migrated to a different CPU in the affinity mask. This can fail when
the CPUs have no vectors left. Instead of giving up try to migrate it
to any online CPU and thereby breaking the affinity setting in order to
prevent a stale device interrupt which targets an offline CPU
- The usual small cleanups
- Driver code:
- Support for the RISCV AIA MSI controller
- Make the interrupt allocation for the Loongson PCH controller more
flexible to prevent vector exhaustion
- The usual set of cleanups and fixes all over the place
-----BEGIN PGP SIGNATURE-----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=jFLf
-----END PGP SIGNATURE-----
Merge tag 'irq-core-2024-05-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull interrupt subsystem updates from Thomas Gleixner:
"Core code:
- Interrupt storm detection for the lockup watchdog:
Lockups which are caused by interrupt storms are not easy to debug
because there is no information about the events which make the
lockup detector trigger.
To make this more user friendly, provide an extenstion to interrupt
statistics which allows to take snapshots and an interface to
retrieve the delta to the snapshot. Use this new mechanism in the
watchdog code to do a two stage lockup analysis by taking the
snapshot and printing the deltas for the topmost active interrupts
on the second trigger.
Note: This contains both the interrupt and the watchdog changes as
the latter depend on the former obviously.
- Avoid summation loops in the /proc/interrupts output and use the
global counter when possible
- Skip suspended interrupts on CPU hotplug operations to ensure that
they are not delivered before the system resumes the device drivers
when coming out of suspend.
- On CPU hot-unplug interrupts which are affine to the outgoing CPU
are migrated to a different CPU in the affinity mask. This can fail
when the CPUs have no vectors left. Instead of giving up try to
migrate it to any online CPU and thereby breaking the affinity
setting in order to prevent a stale device interrupt which targets
an offline CPU
- The usual small cleanups
Driver code:
- Support for the RISCV AIA MSI controller
- Make the interrupt allocation for the Loongson PCH controller more
flexible to prevent vector exhaustion
- The usual set of cleanups and fixes all over the place"
* tag 'irq-core-2024-05-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (51 commits)
irqchip/gic-v3-its: Remove BUG_ON in its_vpe_irq_domain_alloc
cpuidle: Avoid explicit cpumask allocation on stack
irqchip/sifive-plic: Avoid explicit cpumask allocation on stack
irqchip/riscv-aplic-direct: Avoid explicit cpumask allocation on stack
irqchip/loongson-eiointc: Avoid explicit cpumask allocation on stack
irqchip/gic-v3-its: Avoid explicit cpumask allocation on stack
irqchip/irq-bcm6345-l1: Avoid explicit cpumask allocation on stack
cpumask: Introduce cpumask_first_and_and()
irqchip/irq-brcmstb-l2: Avoid saving mask on shutdown
genirq: Reuse irq_is_nmi()
genirq/cpuhotplug: Retry with cpu_online_mask when migration fails
genirq/cpuhotplug: Skip suspended interrupts when restoring affinity
arm64: dts: st: Add interrupt parent to pinctrl on stm32mp251
arm64: dts: st: Add exti1 and exti2 nodes on stm32mp251
ARM: dts: stm32: List exti parent interrupts on stm32mp131
ARM: dts: stm32: List exti parent interrupts on stm32mp151
arm64: Kconfig.platforms: Enable STM32_EXTI for ARCH_STM32
irqchip/stm32-exti: Mark events reserved with RIF configuration check
irqchip/stm32-exti: Skip secure events
irqchip/stm32-exti: Convert driver to standard PM
...
|
||
Masahiro Yamada
|
7f7f6f7ad6 |
Makefile: remove redundant tool coverage variables
Now Kbuild provides reasonable defaults for objtool, sanitizers, and profilers. Remove redundant variables. Note: This commit changes the coverage for some objects: - include arch/mips/vdso/vdso-image.o into UBSAN, GCOV, KCOV - include arch/sparc/vdso/vdso-image-*.o into UBSAN - include arch/sparc/vdso/vma.o into UBSAN - include arch/x86/entry/vdso/extable.o into KASAN, KCSAN, UBSAN, GCOV, KCOV - include arch/x86/entry/vdso/vdso-image-*.o into KASAN, KCSAN, UBSAN, GCOV, KCOV - include arch/x86/entry/vdso/vdso32-setup.o into KASAN, KCSAN, UBSAN, GCOV, KCOV - include arch/x86/entry/vdso/vma.o into GCOV, KCOV - include arch/x86/um/vdso/vma.o into KASAN, GCOV, KCOV I believe these are positive effects because all of them are kernel space objects. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Reviewed-by: Kees Cook <keescook@chromium.org> Tested-by: Roberto Sassu <roberto.sassu@huawei.com> |
||
Mike Rapoport (IBM)
|
0cc2dc4902 |
arch: make execmem setup available regardless of CONFIG_MODULES
execmem does not depend on modules, on the contrary modules use execmem. To make execmem available when CONFIG_MODULES=n, for instance for kprobes, split execmem_params initialization out from arch/*/kernel/module.c and compile it when CONFIG_EXECMEM=y Signed-off-by: Mike Rapoport (IBM) <rppt@kernel.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Luis Chamberlain <mcgrof@kernel.org> |
||
|
Mike Rapoport (IBM)
|
4d7b321a9c |
riscv: extend execmem_params for generated code allocations
The memory allocations for kprobes and BPF on RISC-V are not placed in the modules area and these custom allocations are implemented with overrides of alloc_insn_page() and bpf_jit_alloc_exec(). Define MODULES_VADDR and MODULES_END as VMALLOC_START and VMALLOC_END for 32 bit and slightly reorder execmem_params initialization to support both 32 and 64 bit variants, define EXECMEM_KPROBES and EXECMEM_BPF ranges in riscv::execmem_params and drop overrides of alloc_insn_page() and bpf_jit_alloc_exec(). Signed-off-by: Mike Rapoport (IBM) <rppt@kernel.org> Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com> Signed-off-by: Luis Chamberlain <mcgrof@kernel.org> |
||
|
Mike Rapoport (IBM)
|
f6bec26c0a |
mm/execmem, arch: convert simple overrides of module_alloc to execmem
Several architectures override module_alloc() only to define address range for code allocations different than VMALLOC address space. Provide a generic implementation in execmem that uses the parameters for address space ranges, required alignment and page protections provided by architectures. The architectures must fill execmem_info structure and implement execmem_arch_setup() that returns a pointer to that structure. This way the execmem initialization won't be called from every architecture, but rather from a central place, namely a core_initcall() in execmem. The execmem provides execmem_alloc() API that wraps __vmalloc_node_range() with the parameters defined by the architectures. If an architecture does not implement execmem_arch_setup(), execmem_alloc() will fall back to module_alloc(). Signed-off-by: Mike Rapoport (IBM) <rppt@kernel.org> Acked-by: Song Liu <song@kernel.org> Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> Signed-off-by: Luis Chamberlain <mcgrof@kernel.org> |
||
Jakub Kicinski
|
6e62702feb |
bpf-next-for-netdev
-----BEGIN PGP SIGNATURE----- iHUEABYIAB0WIQTFp0I1jqZrAX+hPRXbK58LschIgwUCZkGcZAAKCRDbK58LschI g6o6APwLsqhrM2w71VUN5ciCxu4H5VDtZp6wkdqtVbxxU4qNxQEApKgYgKt8ZLF3 Kily5c7m+S4ZXhMX21rb8JhSAz0dfQk= =5Dk7 -----END PGP SIGNATURE----- Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next Daniel Borkmann says: ==================== pull-request: bpf-next 2024-05-13 We've added 119 non-merge commits during the last 14 day(s) which contain a total of 134 files changed, 9462 insertions(+), 4742 deletions(-). The main changes are: 1) Add BPF JIT support for 32-bit ARCv2 processors, from Shahab Vahedi. 2) Add BPF range computation improvements to the verifier in particular around XOR and OR operators, refactoring of checks for range computation and relaxing MUL range computation so that src_reg can also be an unknown scalar, from Cupertino Miranda. 3) Add support to attach kprobe BPF programs through kprobe_multi link in a session mode, meaning, a BPF program is attached to both function entry and return, the entry program can decide if the return program gets executed and the entry program can share u64 cookie value with return program. Session mode is a common use-case for tetragon and bpftrace, from Jiri Olsa. 4) Fix a potential overflow in libbpf's ring__consume_n() and improve libbpf as well as BPF selftest's struct_ops handling, from Andrii Nakryiko. 5) Improvements to BPF selftests in context of BPF gcc backend, from Jose E. Marchesi & David Faust. 6) Migrate remaining BPF selftest tests from test_sock_addr.c to prog_test- -style in order to retire the old test, run it in BPF CI and additionally expand test coverage, from Jordan Rife. 7) Big batch for BPF selftest refactoring in order to remove duplicate code around common network helpers, from Geliang Tang. 8) Another batch of improvements to BPF selftests to retire obsolete bpf_tcp_helpers.h as everything is available vmlinux.h, from Martin KaFai Lau. 9) Fix BPF map tear-down to not walk the map twice on free when both timer and wq is used, from Benjamin Tissoires. 10) Fix BPF verifier assumptions about socket->sk that it can be non-NULL, from Alexei Starovoitov. 11) Change BTF build scripts to using --btf_features for pahole v1.26+, from Alan Maguire. 12) Small improvements to BPF reusing struct_size() and krealloc_array(), from Andy Shevchenko. 13) Fix s390 JIT to emit a barrier for BPF_FETCH instructions, from Ilya Leoshkevich. 14) Extend TCP ->cong_control() callback in order to feed in ack and flag parameters and allow write-access to tp->snd_cwnd_stamp from BPF program, from Miao Xu. 15) Add support for internal-only per-CPU instructions to inline bpf_get_smp_processor_id() helper call for arm64 and riscv64 BPF JITs, from Puranjay Mohan. 16) Follow-up to remove the redundant ethtool.h from tooling infrastructure, from Tushar Vyavahare. 17) Extend libbpf to support "module:<function>" syntax for tracing programs, from Viktor Malik. * tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (119 commits) bpf: make list_for_each_entry portable bpf: ignore expected GCC warning in test_global_func10.c bpf: disable strict aliasing in test_global_func9.c selftests/bpf: Free strdup memory in xdp_hw_metadata selftests/bpf: Fix a few tests for GCC related warnings. bpf: avoid gcc overflow warning in test_xdp_vlan.c tools: remove redundant ethtool.h from tooling infra selftests/bpf: Expand ATTACH_REJECT tests selftests/bpf: Expand getsockname and getpeername tests sefltests/bpf: Expand sockaddr hook deny tests selftests/bpf: Expand sockaddr program return value tests selftests/bpf: Retire test_sock_addr.(c|sh) selftests/bpf: Remove redundant sendmsg test cases selftests/bpf: Migrate ATTACH_REJECT test cases selftests/bpf: Migrate expected_attach_type tests selftests/bpf: Migrate wildcard destination rewrite test selftests/bpf: Migrate sendmsg6 v4 mapped address tests selftests/bpf: Migrate sendmsg deny test cases selftests/bpf: Migrate WILDCARD_IP test selftests/bpf: Handle SYSCALL_EPERM and SYSCALL_ENOTSUPP test cases ... ==================== Link: https://lore.kernel.org/r/20240513134114.17575-1-daniel@iogearbox.net Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Inochi Amaoto
|
92cce91949
|
riscv: defconfig: Enable CONFIG_CLK_SOPHGO_CV1800
CONFIG_CLK_SOPHGO_CV1800 is required when booting the minimum system for CV1800 series board. Signed-off-by: Inochi Amaoto <inochiama@outlook.com> Link: https://lore.kernel.org/r/IA1PR20MB49537E8B2D1FAAA7D5B8BDA2BB052@IA1PR20MB4953.namprd20.prod.outlook.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com> |
||
|
Linus Torvalds
|
14a60290ed |
soc: drivers for 6.10
As usual, these are updates for drivers that are specific to certain
SoCs or firmware running on them. Notable updates include
- The new STMicroelectronics STM32 "firewall" bus driver that is
used to provide a barrier between different parts of an SoC
- Lots of updates for the Qualcomm platform drivers, in particular
SCM, which gets a rewrite of its initialization code
- Firmware driver updates for Arm FF-A notification interrupts
and indirect messaging, SCMI firmware support for pin control
and vendor specific interfaces, and TEE firmware interface
changes across multiple TEE drivers
- A larger cleanup of the Mediatek CMDQ driver and some related bits
- Kconfig changes for riscv drivers to prepare for adding Kanaan
k230 support
- Multiple minor updates for the TI sysc bus driver, memory controllers,
hisilicon hccs and more
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmY+dbEACgkQYKtH/8kJ
UifGTBAA3lh2qw++S5i6nk71388/nswb5fZKwqPKl1m+44SndE7r0/nauGm7IZhd
oM5xiBZzsoYCKuesSuejkBNgPmUPtUhyHBJKSKjwrcak4k1mrjDgXxfSxCqGptVZ
Ps683koJ/Ic7O/LQNxlVzUlssG/3gmhJELfpaVIB7rG8pmdgF9ocM73+iJrRwW1Q
fTFXUXeCcXJ2N5Yki7z2+4oB3RebPzTBz4NeIYNdGQj5/u61oG0KzXwvk8eqWhNb
0KJYsfAQZGzdyAys6XU1MHv4T4L2a3DQL6NMgLnovVEMhP2Hk0XlBmI7X+uAXYiM
2z289d9Wx3HMoiekulDJ+rpDUPxPXrEqaRkfWZ8G+HSY4KcIeSP7YGmhylr0kdvw
+Qo6orxZ9lkSPaT1aUkNIIywDzet/E2hY8zV1EcLBu9GWjkybAvT/Uy2lSSN+LLH
yEQyDf+s90N6QuZwdXN8a3QliP39tHqlye8wou6UQG8aZ7z870fKAKlvA6DjTfPM
JyhY1rXYH/bvC87sVTi5Qb09+2R6ftvk5xijiMOyXugPpO/6PQKULVataeUnzwgs
YTgOPhaqXVadDR/nkrG3FzEtvpYeTspwGpDiEpDrNHf5H1tFg6VfPNS8y0QOlSPY
JcmylQNCtwxCRLTw2NHOb3tLcY4ruDHNmrWf5INTzf6cJe49jaU=
=4rf0
-----END PGP SIGNATURE-----
Merge tag 'soc-drivers-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC driver updates from Arnd Bergmann:
"As usual, these are updates for drivers that are specific to certain
SoCs or firmware running on them.
Notable updates include
- The new STMicroelectronics STM32 "firewall" bus driver that is used
to provide a barrier between different parts of an SoC
- Lots of updates for the Qualcomm platform drivers, in particular
SCM, which gets a rewrite of its initialization code
- Firmware driver updates for Arm FF-A notification interrupts and
indirect messaging, SCMI firmware support for pin control and
vendor specific interfaces, and TEE firmware interface changes
across multiple TEE drivers
- A larger cleanup of the Mediatek CMDQ driver and some related bits
- Kconfig changes for riscv drivers to prepare for adding Kanaan k230
support
- Multiple minor updates for the TI sysc bus driver, memory
controllers, hisilicon hccs and more"
* tag 'soc-drivers-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (103 commits)
firmware: qcom: uefisecapp: Allow on sc8180x Primus and Flex 5G
soc: qcom: pmic_glink: Make client-lock non-sleeping
dt-bindings: soc: qcom,wcnss: fix bluetooth address example
soc/tegra: pmc: Add EQOS wake event for Tegra194 and Tegra234
bus: stm32_firewall: fix off by one in stm32_firewall_get_firewall()
bus: etzpc: introduce ETZPC firewall controller driver
firmware: arm_ffa: Avoid queuing work when running on the worker queue
bus: ti-sysc: Drop legacy idle quirk handling
bus: ti-sysc: Drop legacy quirk handling for smartreflex
bus: ti-sysc: Drop legacy quirk handling for uarts
bus: ti-sysc: Add a description and copyrights
bus: ti-sysc: Move check for no-reset-on-init
soc: hisilicon: kunpeng_hccs: replace MAILBOX dependency with PCC
soc: hisilicon: kunpeng_hccs: Add the check for obtaining complete port attribute
firmware: arm_ffa: Fix memory corruption in ffa_msg_send2()
bus: rifsc: introduce RIFSC firewall controller driver
of: property: fw_devlink: Add support for "access-controller"
soc: mediatek: mtk-socinfo: Correct the marketing name for MT8188GV
soc: mediatek: mtk-socinfo: Add entry for MT8395AV/ZA Genio 1200
soc: mediatek: mtk-mutex: Add support for MT8188 VPPSYS
...
|
||
|
Linus Torvalds
|
6c60000f0b |
soc: devicetree updates for 6.10, part 1
The updates this time are a bit smaller than most times, mainly because
it is not totally dominated by new Qualcomm hardware support. Instead,
we larger than average updates for Rockchips, NXP, Allwinner and TI.
The only two new SoCs this time are both from NXP and are minor variants
of already supported ones.
The updates for aspeed, amlogic and mediatek came a little late, so
I'm saving those for part 2 in a few days if everything turns out fine.
New machines this time contain:
- two Broadcom SoC based wireless routers from Asus
- Five allwinner based consumer devices for gaming, set-top-box and
eboot reader applications
- Three older phones based on Qualcomm chips, plus the more recent
Sony Xperia 1 V
- 14 industrial and embedded boards based on NXP i.MX6, i.MX8,
layerscape and s32g3 SoCs
- six rockchips boards including another handheld game console
and a few single-board computers
On top of these, we have the usual cleanups for dtc warnings and
updates to add more features to already merged machines.
-----BEGIN PGP SIGNATURE-----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=SnV4
-----END PGP SIGNATURE-----
Merge tag 'soc-dt-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC devicetree updates from Arnd Bergmann:
"The updates this time are a bit smaller than most times, mainly
because it is not totally dominated by new Qualcomm hardware support.
Instead, we larger than average updates for Rockchips, NXP, Allwinner
and TI. The only two new SoCs this time are both from NXP and are
minor variants of already supported ones.
The updates for aspeed, amlogic and mediatek came a little late, so
I'm saving those for part 2 in a few days if everything turns out
fine.
New machines this time contain:
- two Broadcom SoC based wireless routers from Asus
- Five allwinner based consumer devices for gaming, set-top-box and
eboot reader applications
- Three older phones based on Qualcomm chips, plus the more recent
Sony Xperia 1 V
- 14 industrial and embedded boards based on NXP i.MX6, i.MX8,
layerscape and s32g3 SoCs
- six rockchips boards including another handheld game console and a
few single-board computers
On top of these, we have the usual cleanups for dtc warnings and
updates to add more features to already merged machines"
* tag 'soc-dt-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (612 commits)
arm64: dts: marvell: espressobin-ultra: fix Ethernet Switch unit address
arm64: dts: marvell: turris-mox: drop unneeded flash address/size-cells
arm64: dts: marvell: eDPU: drop redundant address/size-cells
arm64: dts: qcom: pm6150: correct USB VBUS regulator compatible
arm64: dts: rockchip: add rk3588 pcie and php IOMMUs
arm64: dts: rockchip: enable onboard spi flash for rock-3a
arm64: dts: rockchip: add USB-C support to rk3588s-orangepi-5
arm64: dts: rockchip: Enable GPU on Orange Pi 5
arm64: dts: rockchip: enable GPU on khadas-edge2
arm64: dts: rockchip: Add USB3 on Edgeble NCM6A-IO board
arm64: dts: rockchip: Support poweroff on Edgeble Neural Compute Module
arm64: dts: rockchip: Add Radxa ROCK 3C
dt-bindings: arm: rockchip: add Radxa ROCK 3C
arm64: dts: exynos: gs101: specify empty clocks for remaining pinctrl
arm64: dts: exynos: gs101: specify bus clock for pinctrl_hsi2
arm64: dts: exynos: gs101: specify bus clock for pinctrl_peric[01]
arm64: dts: exynos: gs101: specify bus clock for pinctrl (far) alive
arm64: dts: Add/fix /memory node unit-addresses
arm64: dts: qcom: qcs404: fix bluetooth device address
arm64: dts: qcom: sc8280xp-x13s: enable USB MP and fingerprint reader
...
|
||
Joerg Roedel
|
2bd5059c6c | Merge branches 'arm/renesas', 'arm/smmu', 'x86/amd', 'core' and 'x86/vt-d' into next | ||
|
Puranjay Mohan
|
20a759df3b |
riscv, bpf: make some atomic operations fully ordered
The BPF atomic operations with the BPF_FETCH modifier along with
BPF_XCHG and BPF_CMPXCHG are fully ordered but the RISC-V JIT implements
all atomic operations except BPF_CMPXCHG with relaxed ordering.
Section 8.1 of the "The RISC-V Instruction Set Manual Volume I:
Unprivileged ISA" [1], titled, "Specifying Ordering of Atomic
Instructions" says:
| To provide more efficient support for release consistency [5], each
| atomic instruction has two bits, aq and rl, used to specify additional
| memory ordering constraints as viewed by other RISC-V harts.
and
| If only the aq bit is set, the atomic memory operation is treated as
| an acquire access.
| If only the rl bit is set, the atomic memory operation is treated as a
| release access.
|
| If both the aq and rl bits are set, the atomic memory operation is
| sequentially consistent.
Fix this by setting both aq and rl bits as 1 for operations with
BPF_FETCH and BPF_XCHG.
[1] https://riscv.org/wp-content/uploads/2017/05/riscv-spec-v2.2.pdf
Fixes:
|
||
|
Xiao Wang
|
80c5a07ae6 |
riscv, bpf: Fix typo in comment
We can use either "instruction" or "insn" in the comment. Signed-off-by: Xiao Wang <xiao.w.wang@intel.com> Reviewed-by: Pu Lehui <pulehui@huawei.com> Link: https://lore.kernel.org/r/20240507111618.437121-1-xiao.w.wang@intel.com Signed-off-by: Alexei Starovoitov <ast@kernel.org> |