Online defrag operations for ext4 are hard coded to use the page cache.
See ext4_ioctl() -> ext4_move_extents() -> move_extent_per_page()
When combined with DAX I/O, which circumvents the page cache, this can
result in data corruption. This was observed with xfstests ext4/307 and
ext4/308.
Fix this by only allowing online defrag for non-DAX files.
Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Al Viro <viro@ftp.linux.org.uk>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Jens Axboe <axboe@fb.com>
Cc: Matthew Wilcox <matthew.r.wilcox@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When S_DAX is set on an inode we assume that if there are pages attached
to the mapping (mapping->nrpages != 0), those pages are clean zero pages
that were used to service reads from holes. Any dirty data associated
with the inode should be in the form of DAX exceptional entries
(mapping->nrexceptional) that is written back via
dax_writeback_mapping_range().
With the current code, though, this isn't always true. For example,
ext2 and ext4 directory inodes can have S_DAX set, but have their dirty
data stored as dirty page cache entries. For these types of inodes,
having S_DAX set doesn't really make sense since their I/O doesn't
actually happen through the DAX code path.
Instead, only allow S_DAX to be set for regular inodes for ext2 and
ext4. This allows us to have strict DAX vs non-DAX paths in the
writeback code.
Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Al Viro <viro@ftp.linux.org.uk>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Jens Axboe <axboe@fb.com>
Cc: Matthew Wilcox <matthew.r.wilcox@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The recent *sync enabling discovered that we are inserting into the
block_device pagecache counter to the expectations of the dirty data
tracking for dax mappings. This can lead to data corruption.
We want to support DAX for block devices eventually, but it requires
wider changes to properly manage the pagecache.
dump_stack+0x85/0xc2
dax_writeback_mapping_range+0x60/0xe0
blkdev_writepages+0x3f/0x50
do_writepages+0x21/0x30
__filemap_fdatawrite_range+0xc6/0x100
filemap_write_and_wait+0x4a/0xa0
set_blocksize+0x70/0xd0
sb_set_blocksize+0x1d/0x50
ext4_fill_super+0x75b/0x3360
mount_bdev+0x180/0x1b0
ext4_mount+0x15/0x20
mount_fs+0x38/0x170
Mark the support broken so its disabled by default, but otherwise still
available for testing.
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Reported-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Suggested-by: Dave Chinner <david@fromorbit.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Jens Axboe <axboe@fb.com>
Cc: Matthew Wilcox <matthew.r.wilcox@intel.com>
Cc: Al Viro <viro@ftp.linux.org.uk>
Cc: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When doing append direct io cleanup, if deleting inode fails, it goes
out without unlocking inode, which will cause the inode deadlock.
This issue was introduced by commit cf1776a9e8 ("ocfs2: fix a tiny
race when truncate dio orohaned entry").
Signed-off-by: Guozhonghua <guozhonghua@h3c.com>
Signed-off-by: Joseph Qi <joseph.qi@huawei.com>
Reviewed-by: Gang He <ghe@suse.com>
Cc: Mark Fasheh <mfasheh@suse.de>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: <stable@vger.kernel.org> [4.2+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Replace calls to get_random_int() followed by a cast to (unsigned long)
with calls to get_random_long(). Also address shifting bug which, in
case of x86 removed entropy mask for mmap_rnd_bits values > 31 bits.
Signed-off-by: Daniel Cashman <dcashman@android.com>
Acked-by: Kees Cook <keescook@chromium.org>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: David S. Miller <davem@davemloft.net>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Nick Kralevich <nnk@google.com>
Cc: Jeff Vander Stoep <jeffv@google.com>
Cc: Mark Salyzyn <salyzyn@android.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
CURRENT_TIME macro is not appropriate for filesystems as it
doesn't use the right granularity for filesystem timestamps.
Use current_fs_time() instead.
Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com>
Acked-by: Joel Becker <jlbec@evilplan.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
When a directory is deleted, we don't take too much care about killing off
all the dirents that belong to it — on the basis that on remount, the scan
will conclude that the directory is dead anyway.
This doesn't work though, when the deleted directory contained a child
directory which was moved *out*. In the early stages of the fs build
we can then end up with an apparent hard link, with the child directory
appearing both in its true location, and as a child of the original
directory which are this stage of the mount process we don't *yet* know
is defunct.
To resolve this, take out the early special-casing of the "directories
shall not have hard links" rule in jffs2_build_inode_pass1(), and let the
normal nlink processing happen for directories as well as other inodes.
Then later in the build process we can set ic->pino_nlink to the parent
inode#, as is required for directories during normal operaton, instead
of the nlink. And complain only *then* about hard links which are still
in evidence even after killing off all the unreachable paths.
Reported-by: Liu Song <liu.song11@zte.com.cn>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Cc: stable@vger.kernel.org
With this fix, all code paths should now be obtaining the page lock before
f->sem.
Reported-by: Szabó Tamás <sztomi89@gmail.com>
Tested-by: Thomas Betker <thomas.betker@rohde-schwarz.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Cc: stable@vger.kernel.org
This reverts commit 5ffd3412ae
("jffs2: Fix lock acquisition order bug in jffs2_write_begin").
The commit modified jffs2_write_begin() to remove a deadlock with
jffs2_garbage_collect_live(), but this introduced new deadlocks found
by multiple users. page_lock() actually has to be called before
mutex_lock(&c->alloc_sem) or mutex_lock(&f->sem) because
jffs2_write_end() and jffs2_readpage() are called with the page locked,
and they acquire c->alloc_sem and f->sem, resp.
In other words, the lock order in jffs2_write_begin() was correct, and
it is the jffs2_garbage_collect_live() path that has to be changed.
Revert the commit to get rid of the new deadlocks, and to clear the way
for a better fix of the original deadlock.
Reported-by: Deng Chao <deng.chao1@zte.com.cn>
Reported-by: Ming Liu <liu.ming50@gmail.com>
Reported-by: wangzaiwei <wangzaiwei@top-vision.cn>
Signed-off-by: Thomas Betker <thomas.betker@rohde-schwarz.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Cc: stable@vger.kernel.org
Pull vfs fixes from Al Viro:
"Assorted fixes - xattr one from this cycle, the rest - stable fodder"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
fs/pnode.c: treat zero mnt_group_id-s as unequal
affs_do_readpage_ofs(): just use kmap_atomic() around memcpy()
xattr handlers: plug a lock leak in simple_xattr_list
fs: allow no_seek_end_llseek to actually seek
Stable bugfixes:
- Fix nfs_size_to_loff_t
- NFSv4: Fix a dentry leak on alias use
Other bugfixes:
- Don't schedule a layoutreturn if the layout segment can be freed immediately.
- Always set NFS_LAYOUT_RETURN_REQUESTED with lo->plh_return_iomode
- rpcrdma_bc_receive_call() should init rq_private_buf.len
- fix stateid handling for the NFS v4.2 operations
- pnfs/blocklayout: fix a memeory leak when using,vmalloc_to_page
- fix panic in gss_pipe_downcall() in fips mode
- Fix a race between layoutget and pnfs_destroy_layout
- Fix a race between layoutget and bulk recalls
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=/WDS
-----END PGP SIGNATURE-----
Merge tag 'nfs-for-4.5-4' of git://git.linux-nfs.org/projects/trondmy/linux-nfs
Pull NFS client bugfixes from Trond Myklebust:
"Stable bugfixes:
- Fix nfs_size_to_loff_t
- NFSv4: Fix a dentry leak on alias use
Other bugfixes:
- Don't schedule a layoutreturn if the layout segment can be freed
immediately.
- Always set NFS_LAYOUT_RETURN_REQUESTED with lo->plh_return_iomode
- rpcrdma_bc_receive_call() should init rq_private_buf.len
- fix stateid handling for the NFS v4.2 operations
- pnfs/blocklayout: fix a memeory leak when using,vmalloc_to_page
- fix panic in gss_pipe_downcall() in fips mode
- Fix a race between layoutget and pnfs_destroy_layout
- Fix a race between layoutget and bulk recalls"
* tag 'nfs-for-4.5-4' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
NFSv4.x/pnfs: Fix a race between layoutget and bulk recalls
NFSv4.x/pnfs: Fix a race between layoutget and pnfs_destroy_layout
auth_gss: fix panic in gss_pipe_downcall() in fips mode
pnfs/blocklayout: fix a memeory leak when using,vmalloc_to_page
nfs4: fix stateid handling for the NFS v4.2 operations
NFSv4: Fix a dentry leak on alias use
xprtrdma: rpcrdma_bc_receive_call() should init rq_private_buf.len
pNFS: Always set NFS_LAYOUT_RETURN_REQUESTED with lo->plh_return_iomode
pNFS: Fix pnfs_mark_matching_lsegs_return()
nfs: fix nfs_size_to_loff_t
Currently we used atomic bit operations to manipulate
__JI_COMMIT_RUNNING bit. However this is unnecessary as i_flags are
always written and read under j_list_lock. So just change the operations
to standard bit operations.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Revoke and tag descriptor blocks are just different kinds of descriptor
blocks and thus have checksum in the same place. Unify computation and
checking of checksums for these.
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Descriptor block header is initialized in several places. Factor out the
common code into jbd2_journal_get_descriptor_buffer().
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
jbd2_journal_write_revoke_records() takes journal pointer and write_op,
although journal can be obtained from the passed transaction and
write_op is always WRITE_SYNC. Remove these superfluous arguments.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
To reduce amount of damage caused by single bad block, we limit number
of inodes sharing an xattr block to 1024. Thus there can be more xattr
blocks with the same contents when there are lots of files with the same
extended attributes. These xattr blocks naturally result in hash
collisions and can form long hash chains and we unnecessarily check each
such block only to find out we cannot use it because it is already
shared by too many inodes.
Add a reusable flag to cache entries which is cleared when a cache entry
has reached its maximum refcount. Cache entries which are not marked
reusable are skipped by mb_cache_entry_find_{first,next}. This
significantly speeds up mbcache when there are many same xattr blocks.
For example for xattr-bench with 5 values and each process handling
20000 files, the run for 64 processes is 25x faster with this patch.
Even for 8 processes the speedup is almost 3x. We have also verified
that for situations where there is only one xattr block of each kind,
the patch doesn't have a measurable cost.
[JK: Remove handling of setting the same value since it is not needed
anymore, check for races in e_reusable setting, improve changelog,
add measurements]
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
When someone tried to set xattr to the same value (i.e., not changing
anything) we did all the work of removing original xattr, possibly
breaking references to shared xattr block, inserting new xattr, and
merging xattr blocks again. Since this is not so rare operation and it
is relatively cheap for us to detect this case, check for this and
shortcut xattr setting in that case.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Get rid of field _e_hash_list_head in cache entries and add bit field
e_referenced instead.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
This variable, introduced in commit 9c191f70, is unnecessary: it is set
once the module has been initialized correctly, and ext4_fill_super
cannot run unless the module has been initialized correctly.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Since old mbcache code is gone, let's rename new code to mbcache since
number 2 is now meaningless. This is just a mechanical replacement.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Currently we maintain perfect LRU list by moving entry to the tail of
the list when it gets used. However these operations on cache-global
list are relatively expensive.
In this patch we switch to lazy updates of LRU list. Whenever entry gets
used, we set a referenced bit in it. When reclaiming entries, we give
referenced entries another round in the LRU. Since the list is not a
real LRU anymore, rename it to just 'list'.
In my testing this logic gives about 30% boost to workloads with mostly
unique xattr blocks (e.g. xattr-bench with 10 files and 10000 unique
xattr values).
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Replace another case where the layout 'plh_block_lgets' can trigger
infinite loops in send_layoutget().
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
If the server reboots while there is a layoutget outstanding, then
the call to pnfs_choose_layoutget_stateid() will fail with an EAGAIN
error, which causes an infinite loop in send_layoutget(). The reason
why we never break out of the loop is that the layout 'plh_block_lgets'
field is never cleared.
Fix is to replace plh_block_lgets with NFS_LAYOUT_INVALID_STID, which
can be reset after a new layoutget.
Fixes: ab7d763e47 ("pNFS: Ensure nfs4_layoutget_prepare returns...")
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
This patch fixes the problems with patch b3a5bbfd7.
1. It removes a return statement from lowcomms_error_report
because it needs to call the original error report in all paths
through the function.
2. All socket callbacks are saved and restored, not just the
sk_error_report, and that's done so with proper locking like
sunrpc does.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch replaces the call to nodeid_to_addr with a call to
kernel_getpeername. This avoids taking a spinlock because it may
potentially be called from a softirq context.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
So far number of entries in mbcache is limited only by the pressure from
the shrinker. Since too many entries degrade the hash table and
generally we expect that caching more entries has diminishing returns,
limit number of entries the same way as in the old mbcache to 16 * hash
table size.
Once we exceed the desired maximum number of entries, we schedule a
backround work to reclaim entries. If the background work cannot keep up
and the number of entries exceeds two times the desired maximum, we
reclaim some entries directly when allocating a new entry.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Both ext2 and ext4 are now converted to mbcache2. Remove the old mbcache
code.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The conversion is generally straightforward. We convert filesystem from
a global cache to per-fs one. Similarly to ext4 the tricky part is that
xattr block corresponding to found mbcache entry can get freed before we
get buffer lock for that block. So we have to check whether the entry is
still valid after getting the buffer lock.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The conversion is generally straightforward. The only tricky part is
that xattr block corresponding to found mbcache entry can get freed
before we get buffer lock for that block. So we have to check whether
the entry is still valid after getting buffer lock.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Original mbcache was designed to have more features than what ext?
filesystems ended up using. It supported entry being in more hashes, it
had a home-grown rwlocking of each entry, and one cache could cache
entries from multiple filesystems. This genericity also resulted in more
complex locking, larger cache entries, and generally more code
complexity.
This is reimplementation of the mbcache functionality to exactly fit the
purpose ext? filesystems use it for. Cache entries are now considerably
smaller (7 instead of 13 longs), the code is considerably smaller as
well (414 vs 913 lines of code), and IMO also simpler. The new code is
also much more lightweight.
I have measured the speed using artificial xattr-bench benchmark, which
spawns P processes, each process sets xattr for F different files, and
the value of xattr is randomly chosen from a pool of V values. Averages
of runtimes for 5 runs for various combinations of parameters are below.
The first value in each cell is old mbache, the second value is the new
mbcache.
V=10
F\P 1 2 4 8 16 32 64
10 0.158,0.157 0.208,0.196 0.500,0.277 0.798,0.400 3.258,0.584 13.807,1.047 61.339,2.803
100 0.172,0.167 0.279,0.222 0.520,0.275 0.825,0.341 2.981,0.505 12.022,1.202 44.641,2.943
1000 0.185,0.174 0.297,0.239 0.445,0.283 0.767,0.340 2.329,0.480 6.342,1.198 16.440,3.888
V=100
F\P 1 2 4 8 16 32 64
10 0.162,0.153 0.200,0.186 0.362,0.257 0.671,0.496 1.433,0.943 3.801,1.345 7.938,2.501
100 0.153,0.160 0.221,0.199 0.404,0.264 0.945,0.379 1.556,0.485 3.761,1.156 7.901,2.484
1000 0.215,0.191 0.303,0.246 0.471,0.288 0.960,0.347 1.647,0.479 3.916,1.176 8.058,3.160
V=1000
F\P 1 2 4 8 16 32 64
10 0.151,0.129 0.210,0.163 0.326,0.245 0.685,0.521 1.284,0.859 3.087,2.251 6.451,4.801
100 0.154,0.153 0.211,0.191 0.276,0.282 0.687,0.506 1.202,0.877 3.259,1.954 8.738,2.887
1000 0.145,0.179 0.202,0.222 0.449,0.319 0.899,0.333 1.577,0.524 4.221,1.240 9.782,3.579
V=10000
F\P 1 2 4 8 16 32 64
10 0.161,0.154 0.198,0.190 0.296,0.256 0.662,0.480 1.192,0.818 2.989,2.200 6.362,4.746
100 0.176,0.174 0.236,0.203 0.326,0.255 0.696,0.511 1.183,0.855 4.205,3.444 19.510,17.760
1000 0.199,0.183 0.240,0.227 1.159,1.014 2.286,2.154 6.023,6.039 ---,10.933 ---,36.620
V=100000
F\P 1 2 4 8 16 32 64
10 0.171,0.162 0.204,0.198 0.285,0.230 0.692,0.500 1.225,0.881 2.990,2.243 6.379,4.771
100 0.151,0.171 0.220,0.210 0.295,0.255 0.720,0.518 1.226,0.844 3.423,2.831 19.234,17.544
1000 0.192,0.189 0.249,0.225 1.162,1.043 2.257,2.093 5.853,4.997 ---,10.399 ---,32.198
We see that the new code is faster in pretty much all the cases and
starting from 4 processes there are significant gains with the new code
resulting in upto 20-times shorter runtimes. Also for large numbers of
cached entries all values for the old code could not be measured as the
kernel started hitting softlockups and died before the test completed.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
In commit bcff24887d ("ext4: don't read blocks from disk after extents
being swapped") bh is not updated correctly in the for loop and wrong
data has been written to disk. generic/324 catches this on sub-page
block size ext4.
Fixes: bcff24887d ("ext4: don't read blocks from disk after extentsbeing swapped")
Signed-off-by: Eryu Guan <guaneryu@gmail.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@vger.kernel.org
Now, ext4_free_blocks() doesn't revoke data blocks of per-file data
journalled inode and it can cause file data inconsistency problems.
Even though data blocks of per-file data journalled inode are already
forgotten by jbd2_journal_invalidatepage() in advance of invoking
ext4_free_blocks(), we still need to revoke the data blocks here.
Moreover some of the metadata blocks, which are not found by
sb_find_get_block(), are still needed to be revoked, but this is also
missing here.
Signed-off-by: Daeho Jeong <daeho.jeong@samsung.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
This patch defines kernel_read_file_from_fd(), a wrapper for the VFS
common kernel_read_file().
Changelog:
- Separated from the kernel modules patch
Acked-by: Kees Cook <keescook@chromium.org>
Acked-by: Luis R. Rodriguez <mcgrof@kernel.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
The kernel_read_file security hook is called prior to reading the file
into memory.
Changelog v4+:
- export security_kernel_read_file()
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Acked-by: Kees Cook <keescook@chromium.org>
Acked-by: Luis R. Rodriguez <mcgrof@kernel.org>
Acked-by: Casey Schaufler <casey@schaufler-ca.com>
This patch defines kernel_read_file_from_path(), a wrapper for the VFS
common kernel_read_file().
Changelog:
- revert error msg regression - reported by Sergey Senozhatsky
- Separated from the IMA patch
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Acked-by: Kees Cook <keescook@chromium.org>
Acked-by: Luis R. Rodriguez <mcgrof@kernel.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Pull x86 fixes from Ingo Molnar:
"This is unusually large, partly due to the EFI fixes that prevent
accidental deletion of EFI variables through efivarfs that may brick
machines. These fixes are somewhat involved to maintain compatibility
with existing install methods and other usage modes, while trying to
turn off the 'rm -rf' bricking vector.
Other fixes are for large page ioremap()s and for non-temporal
user-memcpy()s"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mm: Fix vmalloc_fault() to handle large pages properly
hpet: Drop stale URLs
x86/uaccess/64: Handle the caching of 4-byte nocache copies properly in __copy_user_nocache()
x86/uaccess/64: Make the __copy_user_nocache() assembly code more readable
lib/ucs2_string: Correct ucs2 -> utf8 conversion
efi: Add pstore variables to the deletion whitelist
efi: Make efivarfs entries immutable by default
efi: Make our variable validation list include the guid
efi: Do variable name validation tests in utf8
efi: Use ucs2_as_utf8 in efivarfs instead of open coding a bad version
lib/ucs2_string: Add ucs2 -> utf8 helper functions
propagate_one(m) calculates "type" argument for copy_tree() like this:
> if (m->mnt_group_id == last_dest->mnt_group_id) {
> type = CL_MAKE_SHARED;
> } else {
> type = CL_SLAVE;
> if (IS_MNT_SHARED(m))
> type |= CL_MAKE_SHARED;
> }
The "type" argument then governs clone_mnt() behavior with respect to flags
and mnt_master of new mount. When we iterate through a slave group, it is
possible that both current "m" and "last_dest" are not shared (although,
both are slaves, i.e. have non-NULL mnt_master-s). Then the comparison
above erroneously makes new mount shared and sets its mnt_master to
last_source->mnt_master. The patch fixes the problem by handling zero
mnt_group_id-s as though they are unequal.
The similar problem exists in the implementation of "else" clause above
when we have to ascend upward in the master/slave tree by calling:
> last_source = last_source->mnt_master;
> last_dest = last_source->mnt_parent;
proper number of times. The last step is governed by
"n->mnt_group_id != last_dest->mnt_group_id" condition that may lie if
both are zero. The patch fixes this case in the same way as the former one.
[AV: don't open-code an obvious helper...]
Signed-off-by: Maxim Patlasov <mpatlasov@virtuozzo.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
It forgets kunmap() on a failure exit, but there's really no point keeping
the page kmapped at all - after all, what we are doing is a bunch of memcpy()
into the parts of page, so kmap_atomic()/kunmap_atomic() just around those
memcpy() is enough.
Spotted-by: Insu Yun <wuninsu@gmail.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
The code could leak xattrs->lock on error.
Problem introduced with 786534b92f "tmpfs: listxattr should
include POSIX ACL xattrs".
Signed-off-by: Mateusz Guzik <mguzik@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
The user-visible impact of the issue is for example that without this
patch sensors-detect breaks when trying to seek in /dev/cpu/0/cpuid.
'~0ULL' is a 'unsigned long long' that when converted to a loff_t,
which is signed, gets turned into -1. later in vfs_setpos we have
'if (offset > maxsize)', which makes it always return EINVAL.
Fixes: b25472f9b9 ("new helpers: no_seek_end_llseek{,_size}()")
Signed-off-by: Wouter van Kesteren <woutershep@gmail.com>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQEcBAABCAAGBQJWx2ZiAAoJEPL5WVaVDYGjrbcH/2EqCUDmW+FqVqR7PkpQsNiV
WxBTNkxnVXf1Jin5beIUN/Ehq0GSuqcSujMwdbFUa0i7YJNVEe++hTw28JmFILYV
5nZtTYmYIq7dZb/tnc3tj0SsDpgEE1h31VyWAu4W2q4wSQMDc8AqGM90VktgrerJ
H9k/WDDL6KC8uXagBsQC0d5xaQglJNZC+S6pSBbMegBAFNJqAL5N78oWAoEFN3OH
LN3B3eccxBx98rGWx8DBiugY8ZDRHB4Cre+fXu8wmAuMb/+Y7Mwj4RzI+fz5Vpiw
vMS5RqZ7PvCaMhdyUWt9bI8j10bBXcaxOHL2UQND5A1zundJ1ZNOY/ZPvHVUS4s=
=AXFu
-----END PGP SIGNATURE-----
Merge tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 bugfixes from Ted Ts'o:
"Miscellaneous ext4 bug fixes for v4.5"
* tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: fix crashes in dioread_nolock mode
ext4: fix bh->b_state corruption
ext4: fix memleak in ext4_readdir()
ext4: remove unused parameter "newblock" in convert_initialized_extent()
ext4: don't read blocks from disk after extents being swapped
ext4: fix potential integer overflow
ext4: add a line break for proc mb_groups display
ext4: ioctl: fix erroneous return value
ext4: fix scheduling in atomic on group checksum failure
ext4 crypto: move context consistency check to ext4_file_open()
ext4 crypto: revalidate dentry after adding or removing the key
Pull btrfs fix from Chris Mason:
"My for-linus-4.5 branch has a btrfs DIO error passing fix.
I know how much you love DIO, so I'm going to suggest against reading
it. We'll follow up with a patch to drop the error arg from
dio_end_io in the next merge window."
* 'for-linus-4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
Btrfs: fix direct IO requests not reporting IO error to user space
Merge fixes from Andrew Morton:
"10 fixes"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
mm: slab: free kmem_cache_node after destroy sysfs file
ipc/shm: handle removed segments gracefully in shm_mmap()
MAINTAINERS: update Kselftest Framework mailing list
devm_memremap_release(): fix memremap'd addr handling
mm/hugetlb.c: fix incorrect proc nr_hugepages value
mm, x86: fix pte_page() crash in gup_pte_range()
fsnotify: turn fsnotify reaper thread into a workqueue job
Revert "fsnotify: destroy marks with call_srcu instead of dedicated thread"
mm: fix regression in remap_file_pages() emulation
thp, dax: do not try to withdraw pgtable from non-anon VMA
Competing overwrite DIO in dioread_nolock mode will just overwrite
pointer to io_end in the inode. This may result in data corruption or
extent conversion happening from IO completion interrupt because we
don't properly set buffer_defer_completion() when unlocked DIO races
with locked DIO to unwritten extent.
Since unlocked DIO doesn't need io_end for anything, just avoid
allocating it and corrupting pointer from inode for locked DIO.
A cleaner fix would be to avoid these games with io_end pointer from the
inode but that requires more intrusive changes so we leave that for
later.
Cc: stable@vger.kernel.org
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
ext4 can update bh->b_state non-atomically in _ext4_get_block() and
ext4_da_get_block_prep(). Usually this is fine since bh is just a
temporary storage for mapping information on stack but in some cases it
can be fully living bh attached to a page. In such case non-atomic
update of bh->b_state can race with an atomic update which then gets
lost. Usually when we are mapping bh and thus updating bh->b_state
non-atomically, nobody else touches the bh and so things work out fine
but there is one case to especially worry about: ext4_finish_bio() uses
BH_Uptodate_Lock on the first bh in the page to synchronize handling of
PageWriteback state. So when blocksize < pagesize, we can be atomically
modifying bh->b_state of a buffer that actually isn't under IO and thus
can race e.g. with delalloc trying to map that buffer. The result is
that we can mistakenly set / clear BH_Uptodate_Lock bit resulting in the
corruption of PageWriteback state or missed unlock of BH_Uptodate_Lock.
Fix the problem by always updating bh->b_state bits atomically.
CC: stable@vger.kernel.org
Reported-by: Nikolay Borisov <kernel@kyup.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
We don't require a dedicated thread for fsnotify cleanup. Switch it
over to a workqueue job instead that runs on the system_unbound_wq.
In the interest of not thrashing the queued job too often when there are
a lot of marks being removed, we delay the reaper job slightly when
queueing it, to allow several to gather on the list.
Signed-off-by: Jeff Layton <jeff.layton@primarydata.com>
Tested-by: Eryu Guan <guaneryu@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Eric Paris <eparis@parisplace.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This reverts commit c510eff6be ("fsnotify: destroy marks with
call_srcu instead of dedicated thread").
Eryu reported that he was seeing some OOM kills kick in when running a
testcase that adds and removes inotify marks on a file in a tight loop.
The above commit changed the code to use call_srcu to clean up the
marks. While that does (in principle) work, the srcu callback job is
limited to cleaning up entries in small batches and only once per jiffy.
It's easily possible to overwhelm that machinery with too many call_srcu
callbacks, and Eryu's reproduer did just that.
There's also another potential problem with using call_srcu here. While
you can obviously sleep while holding the srcu_read_lock, the callbacks
run under local_bh_disable, so you can't sleep there.
It's possible when putting the last reference to the fsnotify_mark that
we'll end up putting a chain of references including the fsnotify_group,
uid, and associated keys. While I don't see any obvious ways that that
could occurs, it's probably still best to avoid using call_srcu here
after all.
This patch reverts the above patch. A later patch will take a different
approach to eliminated the dedicated thread here.
Signed-off-by: Jeff Layton <jeff.layton@primarydata.com>
Reported-by: Eryu Guan <guaneryu@gmail.com>
Tested-by: Eryu Guan <guaneryu@gmail.com>
Cc: Jan Kara <jack@suse.com>
Cc: Eric Paris <eparis@parisplace.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
To differentiate between the kernel_read_file() callers, this patch
defines a new enumeration named kernel_read_file_id and includes the
caller identifier as an argument.
Subsequent patches define READING_KEXEC_IMAGE, READING_KEXEC_INITRAMFS,
READING_FIRMWARE, READING_MODULE, and READING_POLICY.
Changelog v3:
- Replace the IMA specific enumeration with a generic one.
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Acked-by: Kees Cook <keescook@chromium.org>
Acked-by: Luis R. Rodriguez <mcgrof@kernel.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
For a while it was looked down upon to directly read files from Linux.
These days there exists a few mechanisms in the kernel that do just
this though to load a file into a local buffer. There are minor but
important checks differences on each. This patch set is the first
attempt at resolving some of these differences.
This patch introduces a common function for reading files from the kernel
with the corresponding security post-read hook and function.
Changelog v4+:
- export security_kernel_post_read_file() - Fengguang Wu
v3:
- additional bounds checking - Luis
v2:
- To simplify patch review, re-ordered patches
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Reviewed-by: Luis R. Rodriguez <mcgrof@suse.com>
Acked-by: Kees Cook <keescook@chromium.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Pull block fixes from Jens Axboe:
"A collection of fixes from the past few weeks that should go into 4.5.
This contains:
- Overflow fix for sysfs discard show function from Alan.
- A stacking limit init fix for max_dev_sectors, so we don't end up
artificially capping some use cases. From Keith.
- Have blk-mq proper end unstarted requests on a dying queue, instead
of pushing that to the driver. From Keith.
- NVMe:
- Update to Kconfig description for NVME_SCSI, since it was
vague and having it on is important for some SUSE distros.
From Christoph.
- Set of fixes from Keith, around surprise removal. Also kills
the no-merge flag, so it supports merging.
- Set of fixes for lightnvm from Matias, Javier, and Wenwei.
- Fix null_blk oops when asked for lightnvm, but not available. From
Matias.
- Copy-to-user EINTR fix from Hannes, fixing a case where SG_IO fails
if interrupted by a signal.
- Two floppy fixes from Jiri, fixing signal handling and blocking
open.
- A use-after-free fix for O_DIRECT, from Mike Krinkin.
- A block module ref count fix from Roman Pen.
- An fs IO wait accounting fix for O_DSYNC from Stephane Gasparini.
- Smaller reallo fix for xen-blkfront from Bob Liu.
- Removal of an unused struct member in the deadline IO scheduler,
from Tahsin.
- Also from Tahsin, properly initialize inode struct members
associated with cgroup writeback, if enabled.
- From Tejun, ensure that we keep the superblock pinned during cgroup
writeback"
* 'for-linus' of git://git.kernel.dk/linux-block: (25 commits)
blk: fix overflow in queue_discard_max_hw_show
writeback: initialize inode members that track writeback history
writeback: keep superblock pinned during cgroup writeback association switches
bio: return EINTR if copying to user space got interrupted
NVMe: Rate limit nvme IO warnings
NVMe: Poll device while still active during remove
NVMe: Requeue requests on suspended queues
NVMe: Allow request merges
NVMe: Fix io incapable return values
blk-mq: End unstarted requests on dying queue
block: Initialize max_dev_sectors to 0
null_blk: oops when initializing without lightnvm
block: fix module reference leak on put_disk() call for cgroups throttle
nvme: fix Kconfig description for BLK_DEV_NVME_SCSI
kernel/fs: fix I/O wait not accounted for RW O_DSYNC
floppy: refactor open() flags handling
lightnvm: allow to force mm initialization
lightnvm: check overflow and correct mlc pairs
lightnvm: fix request intersection locking in rrpc
lightnvm: warn if irqs are disabled in lock laddr
...
The newly added NFS v4.2 operations (ALLOCATE, DEALLOCATE, SEEK and CLONE)
use a helper called nfs42_set_rw_stateid to select a stateid that is sent
to the server. But they don't set the inode and state fields in the
nfs4_exception structure, and this don't partake in the stateid recovery
protocol. Because of this they will simply return errors insted of trying
to recover a stateid when the server return a BAD_STATEID error.
Additionally CLONE has the problem that it operates on two files and thus
two stateids, and thus needs to call the exception handler twice to
recover stateids.
While we're at it stop grabbing an addititional reference to the open
context in all these operations - having the file open guarantees that
the open context won't go away.
All this can be produces with the generic/168 and generic/170 tests in
xfstests which stress the CLONE stateid handling.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
In the case where d_add_unique() finds an appropriate alias to use it will
have already incremented the reference count. An additional dget() to swap
the open context's dentry is unnecessary and will leak a reference.
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Fixes: 275bb30786 ("NFSv4: Move dentry instantiation into the NFSv4-...")
Cc: stable@vger.kernel.org # 3.10+
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
inode struct members that track cgroup writeback information
should be reinitialized when inode gets allocated from
kmem_cache. Otherwise, their values remain and get used by the
new inode.
Signed-off-by: Tahsin Erdogan <tahsin@google.com>
Acked-by: Tejun Heo <tj@kernel.org>
Fixes: d10c809552 ("writeback: implement foreign cgroup inode bdi_writeback switching")
Signed-off-by: Jens Axboe <axboe@fb.com>
Pull cifs fixes from Steve French:
"A small set of cifs fixes.
I am still reviewing some more, recently submitted SMB3 fixes, but
these three are small and safe and ready now"
* 'for-next' of git://git.samba.org/sfrench/cifs-2.6:
cifs: fix erroneous return value
cifs: fix potential overflow in cifs_compose_mount_options
cifs: remove redundant check for null string pointer
If cgroup writeback is in use, an inode is associated with a cgroup
for writeback. If the inode's main dirtier changes to another cgroup,
the association gets updated asynchronously. Nothing was pinning the
superblock while such switches are in progress and superblock could go
away while async switching is pending or in progress leading to
crashes like the following.
kernel BUG at fs/jbd2/transaction.c:319!
invalid opcode: 0000 [#1] SMP DEBUG_PAGEALLOC
CPU: 1 PID: 29158 Comm: kworker/1:10 Not tainted 4.5.0-rc3 #51
Hardware name: Google Google, BIOS Google 01/01/2011
Workqueue: events inode_switch_wbs_work_fn
task: ffff880213dbbd40 ti: ffff880209264000 task.ti: ffff880209264000
RIP: 0010:[<ffffffff803e6922>] [<ffffffff803e6922>] start_this_handle+0x382/0x3e0
RSP: 0018:ffff880209267c30 EFLAGS: 00010202
...
Call Trace:
[<ffffffff803e6be4>] jbd2__journal_start+0xf4/0x190
[<ffffffff803cfc7e>] __ext4_journal_start_sb+0x4e/0x70
[<ffffffff803b31ec>] ext4_evict_inode+0x12c/0x3d0
[<ffffffff8035338b>] evict+0xbb/0x190
[<ffffffff80354190>] iput+0x130/0x190
[<ffffffff80360223>] inode_switch_wbs_work_fn+0x343/0x4c0
[<ffffffff80279819>] process_one_work+0x129/0x300
[<ffffffff80279b16>] worker_thread+0x126/0x480
[<ffffffff8027ed14>] kthread+0xc4/0xe0
[<ffffffff809771df>] ret_from_fork+0x3f/0x70
Fix it by bumping s_active while cgroup association switching is in
flight.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-and-tested-by: Tahsin Erdogan <tahsin@google.com>
Link: http://lkml.kernel.org/g/CAAeU0aNCq7LGODvVGRU-oU_o-6enii5ey0p1c26D1ZzYwkDc5A@mail.gmail.com
Fixes: d10c809552 ("writeback: implement foreign cgroup inode bdi_writeback switching")
Cc: stable@vger.kernel.org #v4.5+
Signed-off-by: Jens Axboe <axboe@fb.com>
may brick machines. We use a whitelist of known-safe variables to
allow things like installing distributions to work out of the box, and
instead restrict vendor-specific variable deletion by making
non-whitelist variables immutable - Peter Jones
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=F4YT
-----END PGP SIGNATURE-----
Merge tag 'efi-urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/mfleming/efi into x86/urgent
Pull EFI fixes from Matt Fleming:
* Prevent accidental deletion of EFI variables through efivarfs that
may brick machines. We use a whitelist of known-safe variables to
allow things like installing distributions to work out of the box, and
instead restrict vendor-specific variable deletion by making
non-whitelist variables immutable (Peter Jones)
Signed-off-by: Ingo Molnar <mingo@kernel.org>
If a bio for a direct IO request fails, we were not setting the error in
the parent bio (the main DIO bio), making us not return the error to
user space in btrfs_direct_IO(), that is, it made __blockdev_direct_IO()
return the number of bytes issued for IO and not the error a bio created
and submitted by btrfs_submit_direct() got from the block layer.
This essentially happens because when we call:
dio_end_io(dio_bio, bio->bi_error);
It does not set dio_bio->bi_error to the value of the second argument.
So just add this missing assignment in endio callbacks, just as we do in
the error path at btrfs_submit_direct() when we fail to clone the dio bio
or allocate its private object. This follows the convention of what is
done with other similar APIs such as bio_endio() where the caller is
responsible for setting the bi_error field in the bio it passes as an
argument to bio_endio().
This was detected by the new generic test cases in xfstests: 271, 272,
276 and 278. Which essentially setup a dm error target, then load the
error table, do a direct IO write and unload the error table. They
expect the write to fail with -EIO, which was not getting reported
when testing against btrfs.
Cc: stable@vger.kernel.org # 4.3+
Fixes: 4246a0b63b ("block: add a bi_error field to struct bio")
Signed-off-by: Filipe Manana <fdmanana@suse.com>
When setting the layout return mode, we must always also set the
NFS_LAYOUT_RETURN_REQUESTED flag to ensure that we send a layoutreturn.
Otherwise pnfs_error_mark_layout_for_return() could set the mode, but
fail to send the layoutreturn because another is already in flight.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
We don't need to schedule a layoutreturn if the layout segment can
be freed immediately.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Here are a number of small tty and serial driver fixes for 4.5-rc4 that
resolve some reported issues.
One of them got reverted as it wasn't correct based on testing, and all
have been in linux-next for a while.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iEYEABECAAYFAlbAzkEACgkQMUfUDdst+ylE4QCfXW10ziXSblRUIJubEm45Qhn2
WJAAoLFMd/eER2TFkBl4E2Y3I7HUaL5d
=V2Vb
-----END PGP SIGNATURE-----
Merge tag 'tty-4.5-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial fixes from Greg KH:
"Here are a number of small tty and serial driver fixes for 4.5-rc4
that resolve some reported issues.
One of them got reverted as it wasn't correct based on testing, and
all have been in linux-next for a while"
* tag 'tty-4.5-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
Revert "8250: uniphier: allow modular build with 8250 console"
pty: make sure super_block is still valid in final /dev/tty close
pty: fix possible use after free of tty->driver_data
tty: Add support for PCIe WCH382 2S multi-IO card
serial/omap: mark wait_for_xmitr as __maybe_unused
serial: omap: Prevent DoS using unprivileged ioctl(TIOCSRS485)
8250: uniphier: allow modular build with 8250 console
tty: Drop krefs for interrupted tty lock
Pull btrfs fixes from Chris Mason:
"This has a few fixes from Filipe, along with a readdir fix from Dave
that we've been testing for some time"
* 'for-linus-4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
btrfs: properly set the termination value of ctx->pos in readdir
Btrfs: fix hang on extent buffer lock caused by the inode_paths ioctl
Btrfs: remove no longer used function extent_read_full_page_nolock()
Btrfs: fix page reading in extent_same ioctl leading to csum errors
Btrfs: fix invalid page accesses in extent_same (dedup) ioctl
Contains:
o fix for endian conversion issue in new CRC validation in
log recovery that was discovered on a ppc64 platform.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)
iQIcBAABAgAGBQJWvVMvAAoJEK3oKUf0dfodgugP/ioNOzuHYWUabT9Eltq+5ca4
r4/vp8OcQfxQDepWacPhO3K5sR8yI7eM5KG0+NmrIO06HypLjQpLT9h6RB/oj7G2
bIpSzYwWC/D2fCt3HNMLfHmbZRCAOSP8szeKaWp+G3VfF9cZKVpiqm0QJdQc6xi2
52ePFw/Irx2AaThW41U6UP+B9Efw7bBQkSd4ogHXMdilG1tqsWFxTAee7V7+Z3oQ
Pj5g6DpOpV5we3EoYGgdVu4+b66AS5I5srhm8to2wHGu22IE3z4rn1B151gRNVx7
qrtDGdPQcgJkg5g9Ez3LLX1ikN3cBn67ZNGNXpkDveABdS17trgQ5IWxNB6Z57zq
+nnSQnwhmr/CCZoP9F2OzVE4WUtqr5fk07NEx6eOyHcVMQeeW2fzwjzL/BXZze4/
55GwrQU86VYHjMXeD8876qRz108v5/tlBqBrGJ6qxAMEPdKizxJFbQEE06LMz1Mi
v9hga7ssJilo4BDIsrDZ/nkdT01rY8HZiIMUd117TWdhwafvH8wyp9a/wtdbRvu7
tcea+n2gTGkkGcfTmgWQBvtqKU/gpDDLtpIO5zZzNE1kCiITcwnANKus9Ha0/DNj
WBdO/a+bN+i32G0+SI9qnYMCeGMgG6FBLGVk9ZytBvRLr4Fkq2eVFmK1bWpvTMTE
vn8QunELgutZxR2PnOyc
=ti5p
-----END PGP SIGNATURE-----
Merge tag 'xfs-fixes-for-linus-4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs
Pull xfs fix from Dve Chinner:
"This contains a fix for an endian conversion issue in new CRC
validation in log recovery that was discovered on a ppc64 platform"
* tag 'xfs-fixes-for-linus-4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs:
xfs: fix endianness error when checking log block crc on big endian platforms
The "newblock" parameter is not used in convert_initialized_extent(),
remove it.
Signed-off-by: Eryu Guan <guaneryu@gmail.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
I notice ext4/307 fails occasionally on ppc64 host, reporting md5
checksum mismatch after moving data from original file to donor file.
The reason is that move_extent_per_page() calls __block_write_begin()
and block_commit_write() to write saved data from original inode blocks
to donor inode blocks, but __block_write_begin() not only maps buffer
heads but also reads block content from disk if the size is not block
size aligned. At this time the physical block number in mapped buffer
head is pointing to the donor file not the original file, and that
results in reading wrong data to page, which get written to disk in
following block_commit_write call.
This also can be reproduced by the following script on 1k block size ext4
on x86_64 host:
mnt=/mnt/ext4
donorfile=$mnt/donor
testfile=$mnt/testfile
e4compact=~/xfstests/src/e4compact
rm -f $donorfile $testfile
# reserve space for donor file, written by 0xaa and sync to disk to
# avoid EBUSY on EXT4_IOC_MOVE_EXT
xfs_io -fc "pwrite -S 0xaa 0 1m" -c "fsync" $donorfile
# create test file written by 0xbb
xfs_io -fc "pwrite -S 0xbb 0 1023" -c "fsync" $testfile
# compute initial md5sum
md5sum $testfile | tee md5sum.txt
# drop cache, force e4compact to read data from disk
echo 3 > /proc/sys/vm/drop_caches
# test defrag
echo "$testfile" | $e4compact -i -v -f $donorfile
# check md5sum
md5sum -c md5sum.txt
Fix it by creating & mapping buffer heads only but not reading blocks
from disk, because all the data in page is guaranteed to be up-to-date
in mext_page_mkuptodate().
Cc: stable@vger.kernel.org
Signed-off-by: Eryu Guan <guaneryu@gmail.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
This patch adds a line break for proc mb_groups display.
Signed-off-by: Huaitong Han <huaitong.han@intel.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
The ext4_ioctl_setflags() function which is used in the ioctls
EXT4_IOC_SETFLAGS and EXT4_IOC_FSSETXATTR may return the positive value
EPERM instead of -EPERM in case of error. This bug was introduced by a
recent commit 9b7365fc.
The following program can be used to illustrate the wrong behavior:
#include <sys/types.h>
#include <sys/ioctl.h>
#include <sys/stat.h>
#include <fcntl.h>
#include <err.h>
#define FS_IOC_GETFLAGS _IOR('f', 1, long)
#define FS_IOC_SETFLAGS _IOW('f', 2, long)
#define FS_IMMUTABLE_FL 0x00000010
int main(void)
{
int fd;
long flags;
fd = open("file", O_RDWR|O_CREAT, 0600);
if (fd < 0)
err(1, "open");
if (ioctl(fd, FS_IOC_GETFLAGS, &flags) < 0)
err(1, "ioctl: FS_IOC_GETFLAGS");
flags |= FS_IMMUTABLE_FL;
if (ioctl(fd, FS_IOC_SETFLAGS, &flags) < 0)
err(1, "ioctl: FS_IOC_SETFLAGS");
warnx("ioctl returned no error");
return 0;
}
Running it gives the following result:
$ strace -e ioctl ./test
ioctl(3, FS_IOC_GETFLAGS, 0x7ffdbd8bfd38) = 0
ioctl(3, FS_IOC_SETFLAGS, 0x7ffdbd8bfd38) = 1
test: ioctl returned no error
+++ exited with 0 +++
Running the program on a kernel with the bug fixed gives the proper result:
$ strace -e ioctl ./test
ioctl(3, FS_IOC_GETFLAGS, 0x7ffdd2768258) = 0
ioctl(3, FS_IOC_SETFLAGS, 0x7ffdd2768258) = -1 EPERM (Operation not permitted)
test: ioctl: FS_IOC_SETFLAGS: Operation not permitted
+++ exited with 1 +++
Signed-off-by: Anton Protopopov <a.s.protopopov@gmail.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
When block group checksum is wrong, we call ext4_error() while holding
group spinlock from ext4_init_block_bitmap() or
ext4_init_inode_bitmap() which results in scheduling while in atomic.
Fix the issue by calling ext4_error() later after dropping the spinlock.
CC: stable@vger.kernel.org
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
The value of ctx->pos in the last readdir call is supposed to be set to
INT_MAX due to 32bit compatibility, unless 'pos' is intentially set to a
larger value, then it's LLONG_MAX.
There's a report from PaX SIZE_OVERFLOW plugin that "ctx->pos++"
overflows (https://forums.grsecurity.net/viewtopic.php?f=1&t=4284), on a
64bit arch, where the value is 0x7fffffffffffffff ie. LLONG_MAX before
the increment.
We can get to that situation like that:
* emit all regular readdir entries
* still in the same call to readdir, bump the last pos to INT_MAX
* next call to readdir will not emit any entries, but will reach the
bump code again, finds pos to be INT_MAX and sets it to LLONG_MAX
Normally this is not a problem, but if we call readdir again, we'll find
'pos' set to LLONG_MAX and the unconditional increment will overflow.
The report from Victor at
(http://thread.gmane.org/gmane.comp.file-systems.btrfs/49500) with debugging
print shows that pattern:
Overflow: e
Overflow: 7fffffff
Overflow: 7fffffffffffffff
PAX: size overflow detected in function btrfs_real_readdir
fs/btrfs/inode.c:5760 cicus.935_282 max, count: 9, decl: pos; num: 0;
context: dir_context;
CPU: 0 PID: 2630 Comm: polkitd Not tainted 4.2.3-grsec #1
Hardware name: Gigabyte Technology Co., Ltd. H81ND2H/H81ND2H, BIOS F3 08/11/2015
ffffffff81901608 0000000000000000 ffffffff819015e6 ffffc90004973d48
ffffffff81742f0f 0000000000000007 ffffffff81901608 ffffc90004973d78
ffffffff811cb706 0000000000000000 ffff8800d47359e0 ffffc90004973ed8
Call Trace:
[<ffffffff81742f0f>] dump_stack+0x4c/0x7f
[<ffffffff811cb706>] report_size_overflow+0x36/0x40
[<ffffffff812ef0bc>] btrfs_real_readdir+0x69c/0x6d0
[<ffffffff811dafc8>] iterate_dir+0xa8/0x150
[<ffffffff811e6d8d>] ? __fget_light+0x2d/0x70
[<ffffffff811dba3a>] SyS_getdents+0xba/0x1c0
Overflow: 1a
[<ffffffff811db070>] ? iterate_dir+0x150/0x150
[<ffffffff81749b69>] entry_SYSCALL_64_fastpath+0x12/0x83
The jump from 7fffffff to 7fffffffffffffff happens when new dir entries
are not yet synced and are processed from the delayed list. Then the code
could go to the bump section again even though it might not emit any new
dir entries from the delayed list.
The fix avoids entering the "bump" section again once we've finished
emitting the entries, both for synced and delayed entries.
References: https://forums.grsecurity.net/viewtopic.php?f=1&t=4284
Reported-by: Victor <services@swwu.com>
CC: stable@vger.kernel.org
Signed-off-by: David Sterba <dsterba@suse.com>
Tested-by: Holger Hoffstätte <holger.hoffstaette@googlemail.com>
Signed-off-by: Chris Mason <clm@fb.com>
The setup_ntlmv2_rsp() function may return positive value ENOMEM instead
of -ENOMEM in case of kmalloc failure.
Signed-off-by: Anton Protopopov <a.s.protopopov@gmail.com>
CC: Stable <stable@vger.kernel.org>
Signed-off-by: Steve French <smfrench@gmail.com>
In worst case, "ip=" + sb_mountdata + ipv6 can be copied into mountdata.
Therefore, for safe, it is better to add more size when allocating memory.
Signed-off-by: Insu Yun <wuninsu@gmail.com>
Signed-off-by: Steve French <smfrench@gmail.com>
server_RFC1001_name is declared as a RFC1001_NAME_LEN_WITH_NULL sized
char array in struct TCP_Server_Info so the null pointer check on
server_RFC1001_name is redundant and can be removed. Detected with
smatch:
fs/cifs/connect.c:2982 ip_rfc1001_connect() warn: this array is probably
non-NULL. 'server->server_RFC1001_name'
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Steve French <smfrench@gmail.com>
"rm -rf" is bricking some peoples' laptops because of variables being
used to store non-reinitializable firmware driver data that's required
to POST the hardware.
These are 100% bugs, and they need to be fixed, but in the mean time it
shouldn't be easy to *accidentally* brick machines.
We have to have delete working, and picking which variables do and don't
work for deletion is quite intractable, so instead make everything
immutable by default (except for a whitelist), and make tools that
aren't quite so broad-spectrum unset the immutable flag.
Signed-off-by: Peter Jones <pjones@redhat.com>
Tested-by: Lee, Chun-Yi <jlee@suse.com>
Acked-by: Matthew Garrett <mjg59@coreos.com>
Signed-off-by: Matt Fleming <matt@codeblueprint.co.uk>
Translate EFI's UCS-2 variable names to UTF-8 instead of just assuming
all variable names fit in ASCII.
Signed-off-by: Peter Jones <pjones@redhat.com>
Acked-by: Matthew Garrett <mjg59@coreos.com>
Tested-by: Lee, Chun-Yi <jlee@suse.com>
Signed-off-by: Matt Fleming <matt@codeblueprint.co.uk>
Compat ioctl is already introduced in drivers/char/ppdev.c in order to
fix y2038 issue for PP[GS]ETTIME. There is no need to define these
here.
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Tested-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Bamvor Jian Zhang <bamvor.zhangjian@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In the case where the per-file key for the directory is cached, but
root does not have access to the key needed to derive the per-file key
for the files in the directory, we allow the lookup to succeed, so
that lstat(2) and unlink(2) can suceed. However, if a program tries
to open the file, it will get an ENOKEY error.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
kernfs_walk_ns() uses a static path_buf[PATH_MAX] to separate out path
components. Keeping around the 4k buffer just for kernfs_walk_ns() is
wasteful. This patch makes it piggyback on kernfs_pr_cont_buf[]
instead. This requires kernfs_walk_ns() to hold kernfs_rename_lock.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add a validation check for dentries for encrypted directory to make
sure we're not caching stale data after a key has been added or removed.
Also check to make sure that status of the encryption key is updated
when readdir(2) is executed.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Since the checksum function and the field are both __le32, don't
perform endian conversion when comparing the two. This fixes mount
failures on ppc64.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Considering current pty code and multiple devpts instances, it's possible
to umount a devpts file system while a program still has /dev/tty opened
pointing to a previosuly closed pty pair in that instance. In the case all
ptmx and pts/N files are closed, umount can be done. If the program closes
/dev/tty after umount is done, devpts_kill_index will use now an invalid
super_block, which was already destroyed in the umount operation after
running ->kill_sb. This is another "use after free" type of issue, but now
related to the allocated super_block instance.
To avoid the problem (warning at ida_remove and potential crashes) for
this specific case, I added two functions in devpts which grabs additional
references to the super_block, which pty code now uses so it makes sure
the super block structure is still valid until pty shutdown is done.
I also moved the additional inode references to the same functions, which
also covered similar case with inode being freed before /dev/tty final
close/shutdown.
Signed-off-by: Herton R. Krzesinski <herton@redhat.com>
Cc: stable@vger.kernel.org # 2.6.29+
Reviewed-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Merge fixes from Andrew Morton:
"22 fixes"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (22 commits)
epoll: restrict EPOLLEXCLUSIVE to POLLIN and POLLOUT
radix-tree: fix oops after radix_tree_iter_retry
MAINTAINERS: trim the file triggers for ABI/API
dax: dirty inode only if required
thp: make deferred_split_scan() work again
mm: replace vma_lock_anon_vma with anon_vma_lock_read/write
ocfs2/dlm: clear refmap bit of recovery lock while doing local recovery cleanup
um: asm/page.h: remove the pte_high member from struct pte_t
mm, hugetlb: don't require CMA for runtime gigantic pages
mm/hugetlb: fix gigantic page initialization/allocation
mm: downgrade VM_BUG in isolate_lru_page() to warning
mempolicy: do not try to queue pages from !vma_migratable()
mm, vmstat: fix wrong WQ sleep when memory reclaim doesn't make any progress
vmstat: make vmstat_update deferrable
mm, vmstat: make quiet_vmstat lighter
mm/Kconfig: correct description of DEFERRED_STRUCT_PAGE_INIT
memblock: don't mark memblock_phys_mem_size() as __init
dump_stack: avoid potential deadlocks
mm: validate_mm browse_rb SMP race condition
m32r: fix build failure due to SMP and MMU
...
Pull Ceph fixes from Sage Weil:
"We have a few wire protocol compatibility fixes, ports of a few recent
CRUSH mapping changes, and a couple error path fixes"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client:
libceph: MOSDOpReply v7 encoding
libceph: advertise support for TUNABLES5
crush: decode and initialize chooseleaf_stable
crush: add chooseleaf_stable tunable
crush: ensure take bucket value is valid
crush: ensure bucket id is valid before indexing buckets array
ceph: fix snap context leak in error path
ceph: checking for IS_ERR instead of NULL
In the current implementation of the EPOLLEXCLUSIVE flag (added for
4.5-rc1), if epoll waiters create different POLL* sets and register them
as exclusive against the same target fd, the current implementation will
stop waking any further waiters once it finds the first idle waiter.
This means that waiters could miss wakeups in certain cases.
For example, when we wake up a pipe for reading we do:
wake_up_interruptible_sync_poll(&pipe->wait, POLLIN | POLLRDNORM); So if
one epoll set or epfd is added to pipe p with POLLIN and a second set
epfd2 is added to pipe p with POLLRDNORM, only epfd may receive the
wakeup since the current implementation will stop after it finds any
intersection of events with a waiter that is blocked in epoll_wait().
We could potentially address this by requiring all epoll waiters that
are added to p be required to pass the same set of POLL* events. IE the
first EPOLL_CTL_ADD that passes EPOLLEXCLUSIVE establishes the set POLL*
flags to be used by any other epfds that are added as EPOLLEXCLUSIVE.
However, I think it might be somewhat confusing interface as we would
have to reference count the number of users for that set, and so
userspace would have to keep track of that count, or we would need a
more involved interface. It also adds some shared state that we'd have
store somewhere. I don't think anybody will want to bloat
__wait_queue_head for this.
I think what we could do instead, is to simply restrict EPOLLEXCLUSIVE
such that it can only be specified with EPOLLIN and/or EPOLLOUT. So
that way if the wakeup includes 'POLLIN' and not 'POLLOUT', we can stop
once we hit the first idle waiter that specifies the EPOLLIN bit, since
any remaining waiters that only have 'POLLOUT' set wouldn't need to be
woken. Likewise, we can do the same thing if 'POLLOUT' is in the wakeup
bit set and not 'POLLIN'. If both 'POLLOUT' and 'POLLIN' are set in the
wake bit set (there is at least one example of this I saw in fs/pipe.c),
then we just wake the entire exclusive list. Having both 'POLLOUT' and
'POLLIN' both set should not be on any performance critical path, so I
think that's ok (in fs/pipe.c its in pipe_release()). We also continue
to include EPOLLERR and EPOLLHUP by default in any exclusive set. Thus,
the user can specify EPOLLERR and/or EPOLLHUP but is not required to do
so.
Since epoll waiters may be interested in other events as well besides
EPOLLIN, EPOLLOUT, EPOLLERR and EPOLLHUP, these can still be added by
doing a 'dup' call on the target fd and adding that as one normally
would with EPOLL_CTL_ADD. Since I think that the POLLIN and POLLOUT
events are what we are interest in balancing, I think that the 'dup'
thing could perhaps be added to only one of the waiter threads.
However, I think that EPOLLIN, EPOLLOUT, EPOLLERR and EPOLLHUP should be
sufficient for the majority of use-cases.
Since EPOLLEXCLUSIVE is intended to be used with a target fd shared
among multiple epfds, where between 1 and n of the epfds may receive an
event, it does not satisfy the semantics of EPOLLONESHOT where only 1
epfd would get an event. Thus, it is not allowed to be specified in
conjunction with EPOLLEXCLUSIVE.
EPOLL_CTL_MOD is also not allowed if the fd was previously added as
EPOLLEXCLUSIVE. It seems with the limited number of flags to not be as
interesting, but this could be relaxed at some further point.
Signed-off-by: Jason Baron <jbaron@akamai.com>
Tested-by: Madars Vitolins <m@silodev.com>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Al Viro <viro@ftp.linux.org.uk>
Cc: Eric Wong <normalperson@yhbt.net>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Hagen Paul Pfeifer <hagen@jauu.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: Matthew Wilcox <matthew.r.wilcox@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When recovery master down, dlm_do_local_recovery_cleanup() only remove
the $RECOVERY lock owned by dead node, but do not clear the refmap bit.
Which will make umount thread falling in dead loop migrating $RECOVERY
to the dead node.
Signed-off-by: xuejiufei <xuejiufei@huawei.com>
Reviewed-by: Joseph Qi <joseph.qi@huawei.com>
Cc: Mark Fasheh <mfasheh@suse.de>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Previously the pfn_mkwrite() fault handler for raw block devices called
bldev_dax_fault() -> __dax_fault() to do a full DAX page fault.
Really what the pfn_mkwrite() fault handler needs to do is call
dax_pfn_mkwrite() to make sure that the radix tree entry for the given
PTE is marked as dirty so that a follow-up fsync or msync call will
flush it durably to media.
Fixes: 5a023cdba5 ("block: enable dax for raw block devices")
Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Chinner <david@fromorbit.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Matthew Wilcox <willy@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Not needed after the previous patch named
"Btrfs: fix page reading in extent_same ioctl leading to csum errors".
Signed-off-by: Filipe Manana <fdmanana@suse.com>
In the extent_same ioctl, we were grabbing the pages (locked) and
attempting to read them without bothering about any concurrent IO
against them. That is, we were not checking for any ongoing ordered
extents nor waiting for them to complete, which leads to a race where
the extent_same() code gets a checksum verification error when it
reads the pages, producing a message like the following in dmesg
and making the operation fail to user space with -ENOMEM:
[18990.161265] BTRFS warning (device sdc): csum failed ino 259 off 495616 csum 685204116 expected csum 1515870868
Fix this by using btrfs_readpage() for reading the pages instead of
extent_read_full_page_nolock(), which waits for any concurrent ordered
extents to complete and locks the io range. Also do better error handling
and don't treat all failures as -ENOMEM, as that's clearly misleasing,
becoming identical to the checks and operation of prepare_uptodate_page().
The use of extent_read_full_page_nolock() was required before
commit f441460202 ("btrfs: fix deadlock with extent-same and readpage"),
as we had the range locked in an inode's io tree before attempting to
read the pages.
Fixes: f441460202 ("btrfs: fix deadlock with extent-same and readpage")
Cc: stable@vger.kernel.org # 4.2+
Signed-off-by: Filipe Manana <fdmanana@suse.com>
In the extent_same ioctl we are getting the pages for the source and
target ranges and unlocking them immediately after, which is incorrect
because later we attempt to map them (with kmap_atomic) and access their
contents at btrfs_cmp_data(). When we do such access the pages might have
been relocated or removed from memory, which leads to an invalid memory
access. This issue is detected on a kernel with CONFIG_DEBUG_PAGEALLOC=y
which produces a trace like the following:
186736.677437] general protection fault: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC
[186736.680382] Modules linked in: btrfs dm_flakey dm_mod ppdev xor raid6_pq sha256_generic hmac drbg ansi_cprng acpi_cpufreq evdev sg aesni_intel aes_x86_64
parport_pc ablk_helper tpm_tis psmouse parport i2c_piix4 tpm cryptd i2c_core lrw processor button serio_raw pcspkr gf128mul glue_helper loop autofs4 ext4
crc16 mbcache jbd2 sd_mod sr_mod cdrom ata_generic virtio_scsi ata_piix libata virtio_pci virtio_ring crc32c_intel scsi_mod e1000 virtio floppy [last
unloaded: btrfs]
[186736.681319] CPU: 13 PID: 10222 Comm: duperemove Tainted: G W 4.4.0-rc6-btrfs-next-18+ #1
[186736.681319] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS by qemu-project.org 04/01/2014
[186736.681319] task: ffff880132600400 ti: ffff880362284000 task.ti: ffff880362284000
[186736.681319] RIP: 0010:[<ffffffff81264d00>] [<ffffffff81264d00>] memcmp+0xb/0x22
[186736.681319] RSP: 0018:ffff880362287d70 EFLAGS: 00010287
[186736.681319] RAX: 000002c002468acf RBX: 0000000012345678 RCX: 0000000000000000
[186736.681319] RDX: 0000000000001000 RSI: 0005d129c5cf9000 RDI: 0005d129c5cf9000
[186736.681319] RBP: ffff880362287d70 R08: 0000000000000000 R09: 0000000000001000
[186736.681319] R10: ffff880000000000 R11: 0000000000000476 R12: 0000000000001000
[186736.681319] R13: ffff8802f91d4c88 R14: ffff8801f2a77830 R15: ffff880352e83e40
[186736.681319] FS: 00007f27b37fe700(0000) GS:ffff88043dda0000(0000) knlGS:0000000000000000
[186736.681319] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[186736.681319] CR2: 00007f27a406a000 CR3: 0000000217421000 CR4: 00000000001406e0
[186736.681319] Stack:
[186736.681319] ffff880362287ea0 ffffffffa048d0bd 000000000009f000 0000000000001000
[186736.681319] 0100000000000000 ffff8801f2a77850 ffff8802f91d49b0 ffff880132600400
[186736.681319] 00000000000004f8 ffff8801c1efbe41 0000000000000000 0000000000000038
[186736.681319] Call Trace:
[186736.681319] [<ffffffffa048d0bd>] btrfs_ioctl+0x24cb/0x2731 [btrfs]
[186736.681319] [<ffffffff8108a8b0>] ? arch_local_irq_save+0x9/0xc
[186736.681319] [<ffffffff8118b3d4>] ? rcu_read_unlock+0x3e/0x5d
[186736.681319] [<ffffffff811822f8>] do_vfs_ioctl+0x42b/0x4ea
[186736.681319] [<ffffffff8118b4f3>] ? __fget_light+0x62/0x71
[186736.681319] [<ffffffff8118240e>] SyS_ioctl+0x57/0x79
[186736.681319] [<ffffffff814872d7>] entry_SYSCALL_64_fastpath+0x12/0x6f
[186736.681319] Code: 0a 3c 6e 74 0d 3c 79 74 04 3c 59 75 0c c6 06 01 eb 03 c6 06 00 31 c0 eb 05 b8 ea ff ff ff 5d c3 55 31 c9 48 89 e5 48 39 d1 74 13 <0f> b6
04 0f 44 0f b6 04 0e 48 ff c1 44 29 c0 74 ea eb 02 31 c0
(gdb) list *(btrfs_ioctl+0x24cb)
0x5e0e1 is in btrfs_ioctl (fs/btrfs/ioctl.c:2972).
2967 dst_addr = kmap_atomic(dst_page);
2968
2969 flush_dcache_page(src_page);
2970 flush_dcache_page(dst_page);
2971
2972 if (memcmp(addr, dst_addr, cmp_len))
2973 ret = BTRFS_SAME_DATA_DIFFERS;
2974
2975 kunmap_atomic(addr);
2976 kunmap_atomic(dst_addr);
So fix this by making sure we keep the pages locked and respect the same
locking order as everywhere else: get and lock the pages first and then
lock the range in the inode's io tree (like for example at
__btrfs_buffered_write() and extent_readpages()). If an ordered extent
is found after locking the range in the io tree, unlock the range,
unlock the pages, wait for the ordered extent to complete and repeat the
entire locking process until no overlapping ordered extents are found.
Cc: stable@vger.kernel.org # 4.2+
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Merge fixes from Andrew Morton:
"18 fixes"
[ The 18 fixes turned into 17 commits, because one of the fixes was a
fix for another patch in the series that I just folded in by editing
the patch manually - hopefully correctly - Linus ]
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
mm: fix memory leak in copy_huge_pmd()
drivers/hwspinlock: fix race between radix tree insertion and lookup
radix-tree: fix race in gang lookup
mm/vmpressure.c: fix subtree pressure detection
mm: polish virtual memory accounting
mm: warn about VmData over RLIMIT_DATA
Documentation: cgroup-v2: add memory.stat::sock description
mm: memcontrol: drop superfluous entry in the per-memcg stats array
drivers/scsi/sg.c: mark VMA as VM_IO to prevent migration
proc: revert /proc/<pid>/maps [stack:TID] annotation
numa: fix /proc/<pid>/numa_maps for hugetlbfs on s390
MAINTAINERS: update Seth email
ocfs2/cluster: fix memory leak in o2hb_region_release
lib/test-string_helpers.c: fix and improve string_get_size() tests
thp: limit number of object to scan on deferred_split_scan()
thp: change deferred_split_count() to return number of THP in queue
thp: make split_queue per-node
Commit b76437579d ("procfs: mark thread stack correctly in
proc/<pid>/maps") added [stack:TID] annotation to /proc/<pid>/maps.
Finding the task of a stack VMA requires walking the entire thread list,
turning this into quadratic behavior: a thousand threads means a
thousand stacks, so the rendering of /proc/<pid>/maps needs to look at a
million combinations.
The cost is not in proportion to the usefulness as described in the
patch.
Drop the [stack:TID] annotation to make /proc/<pid>/maps (and
/proc/<pid>/numa_maps) usable again for higher thread counts.
The [stack] annotation inside /proc/<pid>/task/<tid>/maps is retained, as
identifying the stack VMA there is an O(1) operation.
Siddesh said:
"The end users needed a way to identify thread stacks programmatically and
there wasn't a way to do that. I'm afraid I no longer remember (or have
access to the resources that would aid my memory since I changed
employers) the details of their requirement. However, I did do this on my
own time because I thought it was an interesting project for me and nobody
really gave any feedback then as to its utility, so as far as I am
concerned you could roll back the main thread maps information since the
information is available in the thread-specific files"
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: "Kirill A. Shutemov" <kirill@shutemov.name>
Cc: Siddhesh Poyarekar <siddhesh.poyarekar@gmail.com>
Cc: Shaohua Li <shli@fb.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When working with hugetlbfs ptes (which are actually pmds) is not valid to
directly use pte functions like pte_present() because the hardware bit
layout of pmds and ptes can be different. This is the case on s390.
Therefore we have to convert the hugetlbfs ptes first into a valid pte
encoding with huge_ptep_get().
Currently the /proc/<pid>/numa_maps code uses hugetlbfs ptes without
huge_ptep_get(). On s390 this leads to the following two problems:
1) The pte_present() function returns false (instead of true) for
PROT_NONE hugetlb ptes. Therefore PROT_NONE vmas are missing
completely in the "numa_maps" output.
2) The pte_dirty() function always returns false for all hugetlb ptes.
Therefore these pages are reported as "mapped=xxx" instead of
"dirty=xxx".
Therefore use huge_ptep_get() to correctly convert the hugetlb ptes.
Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com>
Reviewed-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Cc: <stable@vger.kernel.org> [4.3+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
o2hb_region_release currently doesn't free o2hb_debug_buf
hr_db_elapsed_time and hr_db_pinned malloced in o2hb_debug_create. Also
we should call debugfs_remove before freeing its data, to prevent the risk
accessing debugfs rightly after its data has been freed.
Signed-off-by: Joseph Qi <joseph.qi@huawei.com>
Reviewed-by: Jiufei Xue <xuejiufei@huawei.com>
Cc: Mark Fasheh <mfasheh@suse.de>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull networking fixes from David Miller:
"This looks like a lot but it's a mixture of regression fixes as well
as fixes for longer standing issues.
1) Fix on-channel cancellation in mac80211, from Johannes Berg.
2) Handle CHECKSUM_COMPLETE properly in xt_TCPMSS netfilter xtables
module, from Eric Dumazet.
3) Avoid infinite loop in UDP SO_REUSEPORT logic, also from Eric
Dumazet.
4) Avoid a NULL deref if we try to set SO_REUSEPORT after a socket is
bound, from Craig Gallek.
5) GRO key comparisons don't take lightweight tunnels into account,
from Jesse Gross.
6) Fix struct pid leak via SCM credentials in AF_UNIX, from Eric
Dumazet.
7) We need to set the rtnl_link_ops of ipv6 SIT tunnels before we
register them, otherwise the NEWLINK netlink message is missing
the proper attributes. From Thadeu Lima de Souza Cascardo.
8) Several Spectrum chip bug fixes for mlxsw switch driver, from Ido
Schimmel
9) Handle fragments properly in ipv4 easly socket demux, from Eric
Dumazet.
10) Don't ignore the ifindex key specifier on ipv6 output route
lookups, from Paolo Abeni"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (128 commits)
tcp: avoid cwnd undo after receiving ECN
irda: fix a potential use-after-free in ircomm_param_request
net: tg3: avoid uninitialized variable warning
net: nb8800: avoid uninitialized variable warning
net: vxge: avoid unused function warnings
net: bgmac: clarify CONFIG_BCMA dependency
net: hp100: remove unnecessary #ifdefs
net: davinci_cpdma: use dma_addr_t for DMA address
ipv6/udp: use sticky pktinfo egress ifindex on connect()
ipv6: enforce flowi6_oif usage in ip6_dst_lookup_tail()
netlink: not trim skb for mmaped socket when dump
vxlan: fix a out of bounds access in __vxlan_find_mac
net: dsa: mv88e6xxx: fix port VLAN maps
fib_trie: Fix shift by 32 in fib_table_lookup
net: moxart: use correct accessors for DMA memory
ipv4: ipconfig: avoid unused ic_proto_used symbol
bnxt_en: Fix crash in bnxt_free_tx_skbs() during tx timeout.
bnxt_en: Exclude rx_drop_pkts hw counter from the stack's rx_dropped counter.
bnxt_en: Ring free response from close path should use completion ring
net_sched: drr: check for NULL pointer in drr_dequeue
...
Pull libnvdimm fixes from Dan Williams:
"1/ Fixes to the libnvdimm 'pfn' device that establishes a reserved
area for storing a struct page array.
2/ Fixes for dax operations on a raw block device to prevent pagecache
collisions with dax mappings.
3/ A fix for pfn_t usage in vm_insert_mixed that lead to a null
pointer de-reference.
These have received build success notification from the kbuild robot
across 153 configs and pass the latest ndctl tests"
* 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
phys_to_pfn_t: use phys_addr_t
mm: fix pfn_t to page conversion in vm_insert_mixed
block: use DAX for partition table reads
block: revert runtime dax control of the raw block device
fs, block: force direct-I/O for dax-enabled block devices
devm_memremap_pages: fix vmem_altmap lifetime + alignment handling
libnvdimm, pfn: fix restoring memmap location
libnvdimm: fix mode determination for e820 devices
Provide read-and-reset objects- and blocks-released counters for cachefilesd
to use to work out whether there's anything new that can be culled.
One of the problems cachefilesd has is that if all the objects in the cache
are pinned by inodes lying dormant in the kernel inode cache, there isn't
anything for it to cull. In such a case, it just spins around walking the
filesystem tree and scanning for something to cull. This eats up a lot of
CPU time.
By telling cachefilesd if there have been any releases, the daemon can
sleep until there is the possibility of something to do.
cachefilesd finds this information by the following means:
(1) When the control fd is read, the kernel presents a list of values of
interest. "freleased=N" and "breleased=N" are added to this list to
indicate the number of files released and number of blocks released
since the last read call. At this point the counters are reset.
(2) POLLIN is signalled if the number of files released becomes greater
than 0.
Note that by 'released' it just means that the kernel has released its
interest in those files for the moment, not necessarily that the files
should be deleted from the cache.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Steve Dickson <steved@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Pull timer fixes from Thomas Gleixner:
"The timer departement delivers:
- a regression fix for the NTP code along with a proper selftest
- prevent a spurious timer interrupt in the NOHZ lowres code
- a fix for user space interfaces returning the remaining time on
architectures with CONFIG_TIME_LOW_RES=y
- a few patches to fix COMPILE_TEST fallout"
* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
tick/nohz: Set the correct expiry when switching to nohz/lowres mode
clocksource: Fix dependencies for archs w/o HAS_IOMEM
clocksource: Select CLKSRC_MMIO where needed
tick/sched: Hide unused oneshot timer code
kselftests: timers: Add adjtimex SETOFFSET validity tests
ntp: Fix ADJ_SETOFFSET being used w/ ADJ_NANO
itimers: Handle relative timers with CONFIG_TIME_LOW_RES proper
posix-timers: Handle relative timers with CONFIG_TIME_LOW_RES proper
timerfd: Handle relative timers with CONFIG_TIME_LOW_RES proper
hrtimer: Handle remaining time proper for TIME_LOW_RES
clockevents/tcb_clksrc: Prevent disabling an already disabled clock
Johan Hedberg says:
====================
pull request: bluetooth 2016-01-30
Here's a set of important Bluetooth fixes for the 4.5 kernel:
- Two fixes to 6LoWPAN code (one fixing a potential crash)
- Fix LE pairing with devices using both public and random addresses
- Fix allocation of dynamic LE PSM values
- Fix missing COMPATIBLE_IOCTL for UART line discipline
Please let me know if there are any issues pulling. Thanks.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Avoid populating pagecache when the block device is in DAX mode.
Otherwise these page cache entries collide with the fsync/msync
implementation and break data durability guarantees.
Cc: Jan Kara <jack@suse.com>
Cc: Jeff Moyer <jmoyer@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Reported-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Tested-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Reviewed-by: Matthew Wilcox <willy@linux.intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Dynamically enabling DAX requires that the page cache first be flushed
and invalidated. This must occur atomically with the change of DAX mode
otherwise we confuse the fsync/msync tracking and violate data
durability guarantees. Eliminate the possibilty of DAX-disabled to
DAX-enabled transitions for now and revisit this for the next cycle.
Cc: Jan Kara <jack@suse.com>
Cc: Jeff Moyer <jmoyer@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Matthew Wilcox <willy@linux.intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
So the old one didn't work properly before alternatives had run.
And it was supposed to provide an optimized JMP because the
assumption was that the offset it is jumping to is within a
signed byte and thus a two-byte JMP.
So I did an x86_64 allyesconfig build and dumped all possible
sites where static_cpu_has() was used. The optimization amounted
to all in all 12(!) places where static_cpu_has() had generated
a 2-byte JMP. Which has saved us a whopping 36 bytes!
This clearly is not worth the trouble so we can remove it. The
only place where the optimization might count - in __switch_to()
- we will handle differently. But that's not subject of this
patch.
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1453842730-28463-6-git-send-email-bp@alien8.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Pull btrfs fixes from Chris Mason:
"Dave had a small collection of fixes to the new free space tree code,
one of which was keeping our sysfs files more up to date with feature
bits as different things get enabled (lzo, raid5/6, etc).
I should have kept the sysfs stuff for rc3, since we always manage to
trip over something. This time it was GFP_KERNEL from somewhere that
is NOFS only. Instead of rebasing it out I've put a revert in, and
we'll fix it properly for rc3.
Otherwise, Filipe fixed a btrfs DIO race and Qu Wenruo fixed up a
use-after-free in our tracepoints that Dave Jones reported"
* 'for-linus-4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
Revert "btrfs: synchronize incompat feature bits with sysfs files"
btrfs: don't use GFP_HIGHMEM for free-space-tree bitmap kzalloc
btrfs: sysfs: check initialization state before updating features
Revert "btrfs: clear PF_NOFREEZE in cleaner_kthread()"
btrfs: async-thread: Fix a use-after-free error for trace
Btrfs: fix race between fsync and lockless direct IO writes
btrfs: add free space tree to the cow-only list
btrfs: add free space tree to lockdep classes
btrfs: tweak free space tree bitmap allocation
btrfs: tests: switch to GFP_KERNEL
btrfs: synchronize incompat feature bits with sysfs files
btrfs: sysfs: introduce helper for syncing bits with sysfs files
btrfs: sysfs: add free-space-tree bit attribute
btrfs: sysfs: fix typo in compat_ro attribute definition
This reverts commit 14e46e0495.
This ends up doing sysfs operations from deep in balance (where we
should be GFP_NOFS) and under heavy balance load, we're making races
against sysfs internals.
Revert it for now while we figure things out.
Signed-off-by: Chris Mason <clm@fb.com>
NFS_LAYOUT_RETURN_BEFORE_CLOSE is being used to signal that a
layoutreturn is needed, either due to a layout recall or to a
layout error. Rename it to NFS_LAYOUT_RETURN_REQUESTED in order
to clarify its purpose.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
The HCIUARTGETDEVICE, HCIUARTSETFLAGS and HCIUARTGETFLAGS ioctl are
missing the COMPATIBLE_IOCTL declaration.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
If the mount phase is not finished, we can't update the sysfs files.
Reported-by: Chris Mason <clm@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
This patch replaces uses of ablkcipher and blkcipher with skcipher,
and the long obsolete hash interface with shash.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The layoutreturn code currently relies on pnfs_put_lseg() to initiate the
RPC call when conditions are right. A problem arises when we want to
free the layout segment from inside an inode->i_lock section (e.g. in
pnfs_clear_request_commit()), since we cannot sleep.
The workaround is to move the actual call to pnfs_send_layoutreturn()
to pnfs_put_layout_hdr(), which doesn't have this restriction.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Parameter of trace_btrfs_work_queued() can be freed in its workqueue.
So no one use use that pointer after queue_work().
Fix the user-after-free bug by move the trace line before queue_work().
Reported-by: Dave Jones <davej@codemonkey.org.uk>
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
An fsync, using the fast path, can race with a concurrent lockless direct
IO write and end up logging a file extent item that points to an extent
that wasn't written to yet. This is because the fast fsync path collects
ordered extents into a local list and then collects all the new extent
maps to log file extent items based on them, while the direct IO write
path creates the new extent map before it creates the corresponding
ordered extent (and submitting the respective bio(s)).
So fix this by making the direct IO write path create ordered extents
before the extent maps and make the fast fsync path collect any new
ordered extents after it collects the extent maps.
Note that making the fsync handler call inode_dio_wait() (after acquiring
the inode's i_mutex) would not work and lead to a deadlock when doing
AIO, as through AIO we end up in a path where the fsync handler is called
(through dio_aio_complete_work() -> dio_complete() -> vfs_fsync_range())
before the inode's dio counter is decremented (inode_dio_wait() waits
for this counter to have a value of zero).
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
Pull MIPS updates from Ralf Baechle:
"This is the main pull request for MIPS for 4.5 plus some 4.4 fixes.
The executive summary:
- ATH79 platform improvments, use DT bindings for the ATH79 USB PHY.
- Avoid useless rebuilds for zboot.
- jz4780: Add NEMC, BCH and NAND device tree nodes
- Initial support for the MicroChip's DT platform. As all the device
drivers are missing this is still of limited use.
- Some Loongson3 cleanups.
- The unavoidable whitespace polishing.
- Reduce clock skew when synchronizing the CPU cycle counters on CPU
startup.
- Add MIPS R6 fixes.
- Lots of cleanups across arch/mips as fallout from KVM.
- Lots of minor fixes and changes for IEEE 754-2008 support to the
FPU emulator / fp-assist software.
- Minor Ralink, BCM47xx and bcm963xx platform support improvments.
- Support SMP on BCM63168"
* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (84 commits)
MIPS: zboot: Add support for serial debug using the PROM
MIPS: zboot: Avoid useless rebuilds
MIPS: BMIPS: Enable ARCH_WANT_OPTIONAL_GPIOLIB
MIPS: bcm63xx: nvram: Remove unused bcm63xx_nvram_get_psi_size() function
MIPS: bcm963xx: Update bcm_tag field image_sequence
MIPS: bcm963xx: Move extended flash address to bcm_tag header file
MIPS: bcm963xx: Move Broadcom BCM963xx image tag data structure
MIPS: bcm63xx: nvram: Use nvram structure definition from header file
MIPS: bcm963xx: Add Broadcom BCM963xx board nvram data structure
MAINTAINERS: Add KVM for MIPS entry
MIPS: KVM: Add missing newline to kvm_err()
MIPS: Move KVM specific opcodes into asm/inst.h
MIPS: KVM: Use cacheops.h definitions
MIPS: Break down cacheops.h definitions
MIPS: Use EXCCODE_ constants with set_except_vector()
MIPS: Update trap codes
MIPS: Move Cause.ExcCode trap codes to mipsregs.h
MIPS: KVM: Make kvm_mips_{init,exit}() static
MIPS: KVM: Refactor added offsetof()s
MIPS: KVM: Convert EXPORT_SYMBOL to _GPL
...
Pull Ceph updates from Sage Weil:
"The two main changes are aio support in CephFS, and a series that
fixes several issues in the authentication key timeout/renewal code.
On top of that are a variety of cleanups and minor bug fixes"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client:
libceph: remove outdated comment
libceph: kill off ceph_x_ticket_handler::validity
libceph: invalidate AUTH in addition to a service ticket
libceph: fix authorizer invalidation, take 2
libceph: clear messenger auth_retry flag if we fault
libceph: fix ceph_msg_revoke()
libceph: use list_for_each_entry_safe
ceph: use i_size_{read,write} to get/set i_size
ceph: re-send AIO write request when getting -EOLDSNAP error
ceph: Asynchronous IO support
ceph: Avoid to propagate the invalid page point
ceph: fix double page_unlock() in page_mkwrite()
rbd: delete an unnecessary check before rbd_dev_destroy()
libceph: use list_next_entry instead of list_entry_next
ceph: ceph_frag_contains_value can be boolean
ceph: remove unused functions in ceph_frag.h
Pull SMB3 fixes from Steve French:
"A collection of CIFS/SMB3 fixes.
It includes a couple bug fixes, a few for improved debugging of
cifs.ko and some improvements to the way cifs does key generation.
I do have some additional bug fixes I expect in the next week or two
(to address a problem found by xfstest, and some fixes for SMB3.11
dialect, and a couple patches that just came in yesterday that I am
reviewing)"
* 'for-next' of git://git.samba.org/sfrench/cifs-2.6:
cifs_dbg() outputs an uninitialized buffer in cifs_readdir()
cifs: fix race between call_async() and reconnect()
Prepare for encryption support (first part). Add decryption and encryption key generation. Thanks to Metze for helping with this.
cifs: Allow using O_DIRECT with cache=loose
cifs: Make echo interval tunable
cifs: Check uniqueid for SMB2+ and return -ESTALE if necessary
Print IP address of unresponsive server
cifs: Ratelimit kernel log messages
Pull final vfs updates from Al Viro:
- The ->i_mutex wrappers (with small prereq in lustre)
- a fix for too early freeing of symlink bodies on shmem (they need to
be RCU-delayed) (-stable fodder)
- followup to dedupe stuff merged this cycle
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
vfs: abort dedupe loop if fatal signals are pending
make sure that freeing shmem fast symlinks is RCU-delayed
wrappers for ->i_mutex access
lustre: remove unused declaration
If the program running dedupe receives a fatal signal during the
dedupe loop, we should bail out to avoid tying up the system.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
There are many locations that do
if (memory_was_allocated_by_vmalloc)
vfree(ptr);
else
kfree(ptr);
but kvfree() can handle both kmalloc()ed memory and vmalloc()ed memory
using is_vmalloc_addr(). Unless callers have special reasons, we can
replace this branch with kvfree(). Please check and reply if you found
problems.
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Jan Kara <jack@suse.com>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Acked-by: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Acked-by: David Rientjes <rientjes@google.com>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Oleg Drokin <oleg.drokin@intel.com>
Cc: Boris Petkov <bp@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Previously in DAX we assumed that calls to get_block() would set
bh.b_bdev, and we would then use that value even in error cases for
debugging. This caused a NULL pointer dereference in __dax_dbg() which
was fixed by a previous commit, but that commit only changed the one
place where we were hitting an error.
Instead, update dax.c so that we always initialize bh.b_bdev as best we
can based on the information that DAX has. get_block() may or may not
update to a new value, but this at least lets us get something helpful
from bh.b_bdev for error messages and not have to worry about whether it
was set by get_block() or not.
Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Reported-by: Jan Kara <jack@suse.cz>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
To properly support the new DAX fsync/msync infrastructure filesystems
need to call dax_pfn_mkwrite() so that DAX can track when user pages are
dirtied.
Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jan Kara <jack@suse.com>
Cc: Jeff Layton <jlayton@poochiereds.net>
Cc: Matthew Wilcox <willy@linux.intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Matthew Wilcox <matthew.r.wilcox@intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
To properly support the new DAX fsync/msync infrastructure filesystems
need to call dax_pfn_mkwrite() so that DAX can track when user pages are
dirtied.
Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jan Kara <jack@suse.com>
Cc: Jeff Layton <jlayton@poochiereds.net>
Cc: Matthew Wilcox <willy@linux.intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Matthew Wilcox <matthew.r.wilcox@intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
To properly support the new DAX fsync/msync infrastructure filesystems
need to call dax_pfn_mkwrite() so that DAX can track when user pages are
dirtied.
Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jan Kara <jack@suse.com>
Cc: Jeff Layton <jlayton@poochiereds.net>
Cc: Matthew Wilcox <willy@linux.intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Matthew Wilcox <matthew.r.wilcox@intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
To properly handle fsync/msync in an efficient way DAX needs to track
dirty pages so it is able to flush them durably to media on demand.
The tracking of dirty pages is done via the radix tree in struct
address_space. This radix tree is already used by the page writeback
infrastructure for tracking dirty pages associated with an open file,
and it already has support for exceptional (non struct page*) entries.
We build upon these features to add exceptional entries to the radix
tree for DAX dirty PMD or PTE pages at fault time.
[dan.j.williams@intel.com: fix dax_pmd_dbg build warning]
Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jan Kara <jack@suse.com>
Cc: Jeff Layton <jlayton@poochiereds.net>
Cc: Matthew Wilcox <willy@linux.intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Matthew Wilcox <matthew.r.wilcox@intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add support for tracking dirty DAX entries in the struct address_space
radix tree. This tree is already used for dirty page writeback, and it
already supports the use of exceptional (non struct page*) entries.
In order to properly track dirty DAX pages we will insert new
exceptional entries into the radix tree that represent dirty DAX PTE or
PMD pages. These exceptional entries will also contain the writeback
addresses for the PTE or PMD faults that we can use at fsync/msync time.
There are currently two types of exceptional entries (shmem and shadow)
that can be placed into the radix tree, and this adds a third. We rely
on the fact that only one type of exceptional entry can be found in a
given radix tree based on its usage. This happens for free with DAX vs
shmem but we explicitly prevent shadow entries from being added to radix
trees for DAX mappings.
The only shadow entries that would be generated for DAX radix trees
would be to track zero page mappings that were created for holes. These
pages would receive minimal benefit from having shadow entries, and the
choice to have only one type of exceptional entry in a given radix tree
makes the logic simpler both in clear_exceptional_entry() and in the
rest of DAX.
Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jan Kara <jack@suse.com>
Cc: Jeff Layton <jlayton@poochiereds.net>
Cc: Matthew Wilcox <willy@linux.intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Matthew Wilcox <matthew.r.wilcox@intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When we get a DAX PMD fault for a write it is possible that there could
be some number of 4k zero pages already present for the same range that
were inserted to service reads from a hole. These 4k zero pages need to
be unmapped from the VMAs and removed from the struct address_space
radix tree before the real DAX PMD entry can be inserted.
For PTE faults this same use case also exists and is handled by a
combination of unmap_mapping_range() to unmap the VMAs and
delete_from_page_cache() to remove the page from the address_space radix
tree.
For PMD faults we do have a call to unmap_mapping_range() (protected by
a buffer_new() check), but nothing clears out the radix tree entry. The
buffer_new() check is also incorrect as the current ext4 and XFS
filesystem code will never return a buffer_head with BH_New set, even
when allocating new blocks over a hole. Instead the filesystem will
zero the blocks manually and return a buffer_head with only BH_Mapped
set.
Fix this situation by removing the buffer_new() check and adding a call
to truncate_inode_pages_range() to clear out the radix tree entries
before we insert the DAX PMD.
Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Reported-by: Dan Williams <dan.j.williams@intel.com>
Tested-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jeff Layton <jlayton@poochiereds.net>
Cc: Matthew Wilcox <willy@linux.intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Matthew Wilcox <matthew.r.wilcox@intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In __dax_pmd_fault() we currently assume that get_block() will always
set bh.b_bdev and we unconditionally dereference it in __dax_dbg().
This assumption isn't always true - when called for reads of holes
ext4_dax_mmap_get_block() returns a buffer head where bh->b_bdev is
never set. I hit this BUG while testing the DAX PMD fault path.
Instead, initialize bh.b_bdev before passing bh into get_block(). It is
possible that the filesystem's get_block() will update bh.b_bdev, and
this is fine - we just want to initialize bh.b_bdev to something
reasonable so that the calls to __dax_dbg() work and print something
useful.
Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Reported-by: Dan Williams <dan.j.williams@intel.com>
Cc: Jan Kara <jack@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
parallel to mutex_{lock,unlock,trylock,is_locked,lock_nested},
inode_foo(inode) being mutex_foo(&inode->i_mutex).
Please, use those for access to ->i_mutex; over the coming cycle
->i_mutex will become rwsem, with ->lookup() done with it held
only shared.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Pull more btrfs updates from Chris Mason:
"These are mostly fixes that we've been testing, but also we grabbed
and tested a few small cleanups that had been on the list for a while.
Zhao Lei's patchset also fixes some early ENOSPC buglets"
* 'for-linus-4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: (21 commits)
btrfs: raid56: Use raid_write_end_io for scrub
btrfs: Remove unnecessary ClearPageUptodate for raid56
btrfs: use rbio->nr_pages to reduce calculation
btrfs: Use unified stripe_page's index calculation
btrfs: Fix calculation of rbio->dbitmap's size calculation
btrfs: Fix no_space in write and rm loop
btrfs: merge functions for wait snapshot creation
btrfs: delete unused argument in btrfs_copy_from_user
btrfs: Use direct way to determine raid56 write/recover mode
btrfs: Small cleanup for get index_srcdev loop
btrfs: Enhance chunk validation check
btrfs: Enhance super validation check
Btrfs: fix deadlock running delayed iputs at transaction commit time
Btrfs: fix typo in log message when starting a balance
btrfs: remove duplicate const specifier
btrfs: initialize the seq counter in struct btrfs_device
Btrfs: clean up an error code in btrfs_init_space_info()
btrfs: fix iterator with update error in backref.c
Btrfs: fix output of compression message in btrfs_parse_options()
Btrfs: Initialize btrfs_root->highest_objectid when loading tree root and subvolume roots
...
encryption fixes from me, and Li Xi's Project Quota commits.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQEcBAABCAAGBQJWnwkiAAoJEPL5WVaVDYGjyAAH/1dj1nNL9h+d12V3zXbvoPkg
5RFw/2QfMZ+GE3Lln9gxTBDSyo/9m8hUK8eg0WpIRtGX9NbKcyrWEGJa2XF++43k
tVpKGyN6cqkwPu4M6EPIK9yRvuALGB5PJE/u0q1lu9VoIAgtin3F/bAQK/iHnrUg
M3+lVDtKcmbhqCdocaLLZD6Q4xlQI3wJne99pYt+Dtx95aOQY9v9SV030i7sOnEt
R5JrhmfkgNqVTB8Zz0IxOp5LQlOkuyvtnZ44yYgJH8ckCUnDQI2hbksSqcMamJ1Y
QJWBzRhVXU9gs1nCRy/Xh48mSk+nvZW9aglk+Syzbzg5C63SgwYcqvbCBqJJEdc=
=HjkT
-----END PGP SIGNATURE-----
Merge tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 updates from Ted Ts'o:
"Some locking and page fault bug fixes from Jan Kara, some ext4
encryption fixes from me, and Li Xi's Project Quota commits"
* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
fs: clean up the flags definition in uapi/linux/fs.h
ext4: add FS_IOC_FSSETXATTR/FS_IOC_FSGETXATTR interface support
ext4: add project quota support
ext4: adds project ID support
ext4 crypto: simplify interfaces to directory entry insert functions
ext4 crypto: add missing locking for keyring_key access
ext4: use pre-zeroed blocks for DAX page faults
ext4: implement allocation of pre-zeroed blocks
ext4: provide ext4_issue_zeroout()
ext4: get rid of EXT4_GET_BLOCKS_NO_LOCK flag
ext4: document lock ordering
ext4: fix races of writeback with punch hole and zero range
ext4: fix races between buffered IO and collapse / insert range
ext4: move unlocked dio protection from ext4_alloc_file_blocks()
ext4: fix races between page faults and hole punching
This update contains:
o promotion of XFS_IOC_FS[GS]ETXATTR ioctl to the vfs level so that
it can be shared with other filesystems. The ext4 project quota
functionality is the first target for this. The commits in this
series have not been updated with review or final SOB tags because
the branch they were originally published in was needed by ext4.
Those tags are:
Reviewed-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Dave Chinner <david@fromrobit.com>
o Revert a change that is causing suspend failures.
o Fix a use-after-free that can occur on log mount failures. Been
around forever, but now exposed by other changes to log recovery
made in the first 4.5 merge.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)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=wEy8
-----END PGP SIGNATURE-----
Merge tag 'xfs-for-linus-4.5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs
Pull more xfs updates from Dave Chinner:
"This is the second update for XFS that I mentioned in the original
pull request last week.
It contains a revert for a suspend regression in 4.4 and a fix for a
long standing log recovery issue that has been further exposed by all
the log recovery changes made in the original 4.5 merge.
There is one more thing in this pull request - one that I forgot to
merge into the origin. That is, pulling the XFS_IOC_FS[GS]ETXATTR
ioctl up to the VFS level so that other filesystems can also use it
for modifying project quota IDs
Summary:
- promotion of XFS_IOC_FS[GS]ETXATTR ioctl to the vfs level so that
it can be shared with other filesystems. The ext4 project quota
functionality is the first target for this. The commits in this
series have not been updated with review or final SOB tags because
the branch they were originally published in was needed by ext4.
Those tags are:
Reviewed-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Dave Chinner <david@fromrobit.com>
- Revert a change that is causing suspend failures.
- Fix a use-after-free that can occur on log mount failures. Been
around forever, but now exposed by other changes to log recovery
made in the first 4.5 merge"
* tag 'xfs-for-linus-4.5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs:
xfs: log mount failures don't wait for buffers to be released
Revert "xfs: clear PF_NOFREEZE for xfsaild kthread"
xfs: introduce per-inode DAX enablement
xfs: use FS_XFLAG definitions directly
fs: XFS_IOC_FS[SG]SETXATTR to FS_IOC_FS[SG]ETXATTR promotion
Pull more vfs updates from Al Viro:
"Embarrassing braino fix + pipe page accounting + fixing an eyesore in
find_filesystem() (checking that s1 is equal to prefix of s2 of given
length can be done in many ways, but "compare strlen(s1) with length
and then do strncmp()" is not a good one...)"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
[regression] fix braino in fs/dlm/user.c
pipe: limit the per-user amount of pages allocated in pipes
find_filesystem(): simplify comparison
The requested bitmap size varies, observed numbers were < 4K up to 16K.
Using vmalloc unconditionally would be too heavy, we'll try contiguous
allocations first and fall back to vmalloc if there's no contig memory.
Signed-off-by: David Sterba <dsterba@suse.com>
We must not skip encoding the statistics, or the server will see an
XDR encoding error.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Cc: stable@vger.kernel.org # 4.0+
There's no reason to do GFP_NOFS in tests, it's not data-heavy and
memory allocation failures would affect only developers or testers.
Signed-off-by: David Sterba <dsterba@suse.com>
NFS on a 2 node ocfs2 cluster each node exporting dir. The lock causing
the hang is the global bit map inode lock. Node 1 is master, has the
lock granted in PR mode; Node 2 is in the converting list (PR -> EX).
There are no holders of the lock on the master node so it should
downconvert to NL and grant EX to node 2 but that does not happen.
BLOCKED + QUEUED in lock res are set and it is on osb blocked list.
Threads are waiting in __ocfs2_cluster_lock on BLOCKED. One thread
wants EX, rest want PR. So it is as though the downconvert thread needs
to be kicked to complete the conv.
The hang is caused by an EX req coming into __ocfs2_cluster_lock on the
heels of a PR req after it sets BUSY (drops l_lock, releasing EX
thread), forcing the incoming EX to wait on BUSY without doing anything.
PR has called ocfs2_dlm_lock, which sets the node 1 lock from NL -> PR,
queues ast.
At this time, upconvert (PR ->EX) arrives from node 2, finds conflict
with node 1 lock in PR, so the lock res is put on dlm thread's dirty
listt.
After ret from ocf2_dlm_lock, PR thread now waits behind EX on BUSY till
awoken by ast.
Now it is dlm_thread that serially runs dlm_shuffle_lists, ast, bast, in
that order. dlm_shuffle_lists ques a bast on behalf of node 2 (which
will be run by dlm_thread right after the ast). ast does its part, sets
UPCONVERT_FINISHING, clears BUSY and wakes its waiters. Next,
dlm_thread runs bast. It sets BLOCKED and kicks dc thread. dc thread
runs ocfs2_unblock_lock, but since UPCONVERT_FINISHING set, skips doing
anything and reques.
Inside of __ocfs2_cluster_lock, since EX has been waiting on BUSY ahead
of PR, it wakes up first, finds BLOCKED set and skips doing anything but
clearing UPCONVERT_FINISHING (which was actually "meant" for the PR
thread), and this time waits on BLOCKED. Next, the PR thread comes out
of wait but since UPCONVERT_FINISHING is not set, it skips updating the
l_ro_holders and goes straight to wait on BLOCKED. So there, we have a
hang! Threads in __ocfs2_cluster_lock wait on BLOCKED, lock res in osb
blocked list. Only when dc thread is awoken, it will run
ocfs2_unblock_lock and things will unhang.
One way to fix this is to wake the dc thread on the flag after clearing
UPCONVERT_FINISHING
Orabug: 20933419
Signed-off-by: Tariq Saeed <tariq.x.saeed@oracle.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Reviewed-by: Wengang Wang <wen.gang.wang@oracle.com>
Reviewed-by: Mark Fasheh <mfasheh@suse.de>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Reviewed-by: Joseph Qi <joseph.qi@huawei.com>
Cc: Eric Ren <zren@suse.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
reiserfs_iget() returns either NULL or error code in ERR_PTR. And we
were only checking for NULL, so in case of some other error we will try
to dereference the ERR_PTR(-errno) thinking it to be a valid pointer.
Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
After THP refcounting rework we have only two possible return values
from pmd_trans_huge_lock(): success and failure. Return-by-pointer for
ptl doesn't make much sense in this case.
Let's convert pmd_trans_huge_lock() to return ptl on success and NULL on
failure.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Minchan Kim <minchan@kernel.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
it's "bugger off if we got ERR_PTR", not the other way round...
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
I noticed that all the callers of this function pass cinfo->mds->list as
an argument in addition to the cinfo structure itself. Let's get rid of
the extra argument, since it doesn't seem to be adding anything.
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
When we hit 22 errors, we start to overflow the memory buffers allocated
to the LAYOUTRETURN errors. The issue is that currently, RPC call reply
ordering determines how successful we are in merging errors that refer
to contiguous READ or WRITE requests.
Fix is to use an insertion sort to help detect contiguity.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Merge third patch-bomb from Andrew Morton:
"I'm pretty much done for -rc1 now:
- the rest of MM, basically
- lib/ updates
- checkpatch, epoll, hfs, fatfs, ptrace, coredump, exit
- cpu_mask simplifications
- kexec, rapidio, MAINTAINERS etc, etc.
- more dma-mapping cleanups/simplifications from hch"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (109 commits)
MAINTAINERS: add/fix git URLs for various subsystems
mm: memcontrol: add "sock" to cgroup2 memory.stat
mm: memcontrol: basic memory statistics in cgroup2 memory controller
mm: memcontrol: do not uncharge old page in page cache replacement
Documentation: cgroup: add memory.swap.{current,max} description
mm: free swap cache aggressively if memcg swap is full
mm: vmscan: do not scan anon pages if memcg swap limit is hit
swap.h: move memcg related stuff to the end of the file
mm: memcontrol: replace mem_cgroup_lruvec_online with mem_cgroup_online
mm: vmscan: pass memcg to get_scan_count()
mm: memcontrol: charge swap to cgroup2
mm: memcontrol: clean up alloc, online, offline, free functions
mm: memcontrol: flatten struct cg_proto
mm: memcontrol: rein in the CONFIG space madness
net: drop tcp_memcontrol.c
mm: memcontrol: introduce CONFIG_MEMCG_LEGACY_KMEM
mm: memcontrol: allow to disable kmem accounting for cgroup2
mm: memcontrol: account "kmem" consumers in cgroup2 memory controller
mm: memcontrol: move kmem accounting code to CONFIG_MEMCG
mm: memcontrol: separate kmem code from legacy tcp accounting code
...
Pull overlayfs updates from Miklos Szeredi:
"This contains several bug fixes and a new mount option
'default_permissions' that allows read-only exported NFS
filesystems to be used as lower layer"
* 'overlayfs-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs:
ovl: check dentry positiveness in ovl_cleanup_whiteouts()
ovl: setattr: check permissions before copy-up
ovl: root: copy attr
ovl: move super block magic number to magic.h
ovl: use a minimal buffer in ovl_copy_xattr
ovl: allow zero size xattr
ovl: default permissions
Pull fuse updates from Miklos Szeredi:
"This adds SEEK_HOLE and SEEK_DATA support in lseek"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
fuse: add support for SEEK_HOLE and SEEK_DATA in lseek
Cap message from MDS can update i_size. In that case, we don't
hold i_mutex. So it's unsafe to directly access inode->i_size
while holding i_mutex.
Signed-off-by: Yan, Zheng <zyan@redhat.com>
When receiving -EOLDSNAP from OSD, we need to re-send corresponding
write request. Due to locking issue, we can send new request inside
another OSD request's complete callback. So we use worker to re-send
request for AIO write.
Signed-off-by: Yan, Zheng <zyan@redhat.com>
The basic idea of AIO support is simple, just call kiocb::ki_complete()
in OSD request's complete callback. But there are several special cases.
when IO span multiple objects, we need to wait until all OSD requests
are complete, then call kiocb::ki_complete(). Error handling in this case
is tricky too. For simplify, AIO both span multiple objects and extends
i_size are not allowed.
Another special case is check EOF for reading (other client can write to
the file and extend i_size concurrently). For simplify, the direct-IO/AIO
code path does do the check, fallback to normal syn read instead.
Signed-off-by: Yan, Zheng <zyan@redhat.com>
The variant pagep will still get the invalid page point, although ceph
fails in function ceph_update_writeable_page.
To fix this issue, Assigne the page to pagep until there is no failure
in function ceph_update_writeable_page.
Signed-off-by: Minfei Huang <mnfhuang@gmail.com>
Signed-off-by: Yan, Zheng <zyan@redhat.com>
ceph_update_writeable_page() unlocks the page on errors, so
page_mkwrite() should not unlock the page again.
Signed-off-by: Yan, Zheng <zyan@redhat.com>
The files under /sys/fs/UUID/features get out of sync with the actual
incompat bits set for the filesystem if they change after mount (eg. the
LZO compression).
Synchronize the feature bits with the sysfs files representing them
right after we set/clear them.
Signed-off-by: David Sterba <dsterba@suse.com>
The files under /sys/fs/UUID/features get out of sync with the actual
incompat bits set for the filesystem if they change after mount. We're
going to sync them and need a helper to do that.
Signed-off-by: David Sterba <dsterba@suse.com>
The incompat bit representing the newly added free space tree feature is
missing. Right now it will be listed only among features supported by
the module, not per-fs.
Signed-off-by: David Sterba <dsterba@suse.com>
Pull SCSI target updates from Nicholas Bellinger:
"The highlights this round include:
- Introduce configfs support for unlocked configfs_depend_item()
(krzysztof + andrezej)
- Conversion of usb-gadget target driver to new function registration
interface (andrzej + sebastian)
- Enable qla2xxx FC target mode support for Extended Logins (himansu +
giridhar)
- Enable qla2xxx FC target mode support for Exchange Offload (himansu +
giridhar)
- Add qla2xxx FC target mode irq affinity notification + selective
command queuing. (quinn + himanshu)
- Fix iscsi-target deadlock in se_node_acl configfs deletion (sagi +
nab)
- Convert se_node_acl configfs deletion + se_node_acl->queue_depth to
proper se_session->sess_kref + target_get_session() usage. (hch +
sagi + nab)
- Fix long-standing race between se_node_acl->acl_kref get and
get_initiator_node_acl() lookup. (hch + nab)
- Fix target/user block-size handling, and make sure netlink reaches
all network namespaces (sheng + andy)
Note there is an outstanding bug-fix series for remote I_T nexus port
TMR LUN_RESET has been posted and still being tested, and will likely
become post -rc1 material at this point"
* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (56 commits)
scsi: qla2xxxx: avoid type mismatch in comparison
target/user: Make sure netlink would reach all network namespaces
target: Obtain se_node_acl->acl_kref during get_initiator_node_acl
target: Convert ACL change queue_depth se_session reference usage
iscsi-target: Fix potential dead-lock during node acl delete
ib_srpt: Convert acl lookup to modern get_initiator_node_acl usage
tcm_fc: Convert acl lookup to modern get_initiator_node_acl usage
tcm_fc: Wait for command completion before freeing a session
target: Fix a memory leak in target_dev_lba_map_store()
target: Support aborting tasks with a 64-bit tag
usb/gadget: Remove set-but-not-used variables
target: Remove an unused variable
target: Fix indentation in target_core_configfs.c
target/user: Allow user to set block size before enabling device
iser-target: Fix non negative ERR_PTR isert_device_get usage
target/fcoe: Add tag support to tcm_fc
qla2xxx: Check for online flag instead of active reset when transmitting responses
qla2xxx: Set all queues to 4k
qla2xxx: Disable ZIO at start time.
qla2xxx: Move atioq to a different lock to reduce lock contention
...
i386 allmodconfig:
In file included from fs/overlayfs/super.c:10:0:
fs/overlayfs/super.c: In function 'ovl_fill_super':
include/linux/fs.h:898:36: error: 'PAGE_CACHE_SIZE' undeclared (first use in this function)
#define MAX_LFS_FILESIZE (((loff_t)PAGE_CACHE_SIZE << (BITS_PER_LONG-1))-1)
^
fs/overlayfs/super.c:939:19: note: in expansion of macro 'MAX_LFS_FILESIZE'
sb->s_maxbytes = MAX_LFS_FILESIZE;
^
include/linux/fs.h:898:36: note: each undeclared identifier is reported only once for each function it appears in
#define MAX_LFS_FILESIZE (((loff_t)PAGE_CACHE_SIZE << (BITS_PER_LONG-1))-1)
^
fs/overlayfs/super.c:939:19: note: in expansion of macro 'MAX_LFS_FILESIZE'
sb->s_maxbytes = MAX_LFS_FILESIZE;
^
Cc: Miklos Szeredi <miklos@szeredi.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Only functions doing more than one read are modified. Consumeres
happened to deal with possibly changing data, but it does not seem like
a good thing to rely on.
Signed-off-by: Mateusz Guzik <mguzik@redhat.com>
Acked-by: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Jarod Wilson <jarod@redhat.com>
Cc: Jan Stancek <jstancek@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Anshuman Khandual <anshuman.linux@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Let %h and %e print empty values as "!", "." as "!" and
".." as "!.".
This prevents hostnames and comm values that are empty or consist of one
or two dots from changing the directory level at which the corefile will
be stored.
Consider the case where someone decides to sort coredumps by hostname
with a core pattern like "/cores/%h/core.%e.%p.%t" or so. In this
case, hostnames "" and "." would cause the coredump to land directly in
/cores, which is not what the intent behind the core pattern is, and
".." would cause the coredump to land in /.
Yeah, there probably aren't many people who do that, but I still don't
want this edgecase to be kind of broken.
It seems very unlikely that this caused security issues anywhere, so I'm
not requesting a stable backport.
[akpm@linux-foundation.org: tweak code comment]
Signed-off-by: Jann Horn <jann@thejh.net>
Acked-by: Kees Cook <keescook@chromium.org>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
By checking the effective credentials instead of the real UID / permitted
capabilities, ensure that the calling process actually intended to use its
credentials.
To ensure that all ptrace checks use the correct caller credentials (e.g.
in case out-of-tree code or newly added code omits the PTRACE_MODE_*CREDS
flag), use two new flags and require one of them to be set.
The problem was that when a privileged task had temporarily dropped its
privileges, e.g. by calling setreuid(0, user_uid), with the intent to
perform following syscalls with the credentials of a user, it still passed
ptrace access checks that the user would not be able to pass.
While an attacker should not be able to convince the privileged task to
perform a ptrace() syscall, this is a problem because the ptrace access
check is reused for things in procfs.
In particular, the following somewhat interesting procfs entries only rely
on ptrace access checks:
/proc/$pid/stat - uses the check for determining whether pointers
should be visible, useful for bypassing ASLR
/proc/$pid/maps - also useful for bypassing ASLR
/proc/$pid/cwd - useful for gaining access to restricted
directories that contain files with lax permissions, e.g. in
this scenario:
lrwxrwxrwx root root /proc/13020/cwd -> /root/foobar
drwx------ root root /root
drwxr-xr-x root root /root/foobar
-rw-r--r-- root root /root/foobar/secret
Therefore, on a system where a root-owned mode 6755 binary changes its
effective credentials as described and then dumps a user-specified file,
this could be used by an attacker to reveal the memory layout of root's
processes or reveal the contents of files he is not allowed to access
(through /proc/$pid/cwd).
[akpm@linux-foundation.org: fix warning]
Signed-off-by: Jann Horn <jann@thejh.net>
Acked-by: Kees Cook <keescook@chromium.org>
Cc: Casey Schaufler <casey@schaufler-ca.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Morris <james.l.morris@oracle.com>
Cc: "Serge E. Hallyn" <serge.hallyn@ubuntu.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Willy Tarreau <w@1wt.eu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The fatent_operations structures are never modified, so declare them as
const.
Done with the help of Coccinelle.
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Acked-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Make the fibmap call return the proper physical block number for any
offset request in the fallocated range.
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Amit Sahrawat <a.sahrawat@samsung.com>
Cc: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Skip new cluster allocation after checking i_blocks limit in _fat_get_block,
because the blocks are already allocated in fallocated region.
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Amit Sahrawat <a.sahrawat@samsung.com>
Cc: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Implement preallocation via the fallocate syscall on VFAT partitions.
This patch is based on an earlier patch of the same name which had some
issues detailed below and did not get accepted. Refer
https://lkml.org/lkml/2007/12/22/130.
a) The preallocated space was not persistent when the
FALLOC_FL_KEEP_SIZE flag was set. It will deallocate cluster at evict
time.
b) There was no need to zero out the clusters when the flag was set
Instead of doing an expanding truncate, just allocate clusters and add
them to the fat chain. This reduces preallocation time.
Compatibility with windows:
There are no issues when FALLOC_FL_KEEP_SIZE is not set because it just
does an expanding truncate. Thus reading from the preallocated area on
windows returns null until data is written to it.
When a file with preallocated area using the FALLOC_FL_KEEP_SIZE was
written to on windows, the windows driver freed-up the preallocated
clusters and allocated new clusters for the new data. The freed up
clusters gets reflected in the free space available for the partition
which can be seen from the Volume properties.
The windows chkdsk tool also does not report any errors on a disk
containing files with preallocated space.
And there is also no issue using linux fat fsck. because discard
preallocated clusters at repair time.
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Amit Sahrawat <a.sahrawat@samsung.com>
Cc: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This detects simple corruption cases of directory, and tries to avoid
further damage to user data.
And performance impact of this validation should be very low, or not
measurable.
Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Reported-by: Vegard Nossum <vegard.nossum@oracle.com>
Tested-by: Vegard Nossum <vegard.nossum@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Currently we limit values of time_offset mount option to be between -12
and 12 hours. However e.g. zone GMT+12 can have a DST correction on top
which makes the total time difference 13 hours. Update the checks in
mount option parsing to allow offset of upto 24 hours to allow for unusual
cases.
Signed-off-by: Jan Kara <jack@suse.cz>
Reported-by: Volker Kuhlmann <list0570@paradise.net.nz>
Acked-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Use list_for_each_entry() instead of list_for_each() to simplify the code.
Signed-off-by: Geliang Tang <geliangtang@163.com>
Reviewed-by: Vyacheslav Dubeyko <slava@dubeyko.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Currently, epoll file descriptors or epfds (the fd returned from
epoll_create[1]()) that are added to a shared wakeup source are always
added in a non-exclusive manner. This means that when we have multiple
epfds attached to a shared fd source they are all woken up. This creates
thundering herd type behavior.
Introduce a new 'EPOLLEXCLUSIVE' flag that can be passed as part of the
'event' argument during an epoll_ctl() EPOLL_CTL_ADD operation. This new
flag allows for exclusive wakeups when there are multiple epfds attached
to a shared fd event source.
The implementation walks the list of exclusive waiters, and queues an
event to each epfd, until it finds the first waiter that has threads
blocked on it via epoll_wait(). The idea is to search for threads which
are idle and ready to process the wakeup events. Thus, we queue an event
to at least 1 epfd, but may still potentially queue an event to all epfds
that are attached to the shared fd source.
Performance testing was done by Madars Vitolins using a modified version
of Enduro/X. The use of the 'EPOLLEXCLUSIVE' flag reduce the length of
this particular workload from 860s down to 24s.
Sample epoll_clt text:
EPOLLEXCLUSIVE
Sets an exclusive wakeup mode for the epfd file descriptor that is
being attached to the target file descriptor, fd. Thus, when an event
occurs and multiple epfd file descriptors are attached to the same
target file using EPOLLEXCLUSIVE, one or more epfds will receive an
event with epoll_wait(2). The default in this scenario (when
EPOLLEXCLUSIVE is not set) is for all epfds to receive an event.
EPOLLEXCLUSIVE may only be specified with the op EPOLL_CTL_ADD.
Signed-off-by: Jason Baron <jbaron@akamai.com>
Tested-by: Madars Vitolins <m@silodev.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Al Viro <viro@ftp.linux.org.uk>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Cc: Eric Wong <normalperson@yhbt.net>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Hagen Paul Pfeifer <hagen@jauu.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
For THP=n, HPAGE_PMD_NR in smaps_account() expands to BUILD_BUG().
That's fine since this codepath is eliminated by modern compilers.
But older compilers have not that efficient dead code elimination. It
causes problem at least with gcc 4.1.2 on m68k:
fs/built-in.o: In function `smaps_account':
task_mmu.c:(.text+0x4f8fa): undefined reference to `__compiletime_assert_471'
Let's replace HPAGE_PMD_NR with 1 << compound_order(page).
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull kbuild updates from Michal Marek:
- Make <modname>-m in makefiles work like <modname>-y and fix the
fallout
- Minor genksyms fix
- Fix race with make -j install modules_install
- Move -Wsign-compare from make W=1 to W=2
- Other minor fixes
* 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
kbuild: Demote 'sign-compare' warning to W=2
Makefile: revert "Makefile: Document ability to make file.lst and file.S" partially
kbuild: Do not run modules_install and install in paralel
genksyms: Handle string literals with spaces in reference files
fixdep: constify strrcmp arguments
ath10k: Fix build with CONFIG_THERMAL=m
Revert "drm: Hack around CONFIG_AGP=m build failures"
kbuild: Allow to specify composite modules with modname-m
staging/ad7606: Actually build the interface modules
No need to create additional end_io function for scrub, it increased
code size and introduced some un-unified lines, as:
raid_write_parity_end_io():
int err = bio->bi_error;
if (bio->bi_error)
raid_write_end_io():
int err = bio->bi_error;
if (err)
This patch combines them.
Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
PageUptodate flag already initialized to 0 for new page,
no need to set it again.
Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
We can use rbio->stripe_npages to reduce unnecessary calculation in
many code place.
Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
We are using different index calculation method for stripe_page in
current code:
1: (rbio->stripe_len / PAGE_CACHE_SIZE) * stripe_index + page_index
2: DIV_ROUND_UP(rbio->stripe_len, PAGE_CACHE_SIZE) * stripe_index + page_index
3: DIV_ROUND_UP(rbio->stripe_len * stripe_index, PAGE_CACHE_SIZE) + page_index
...
They can get same result when stripe_len align to PAGE_CACHE_SIZE,
this is why current code can work, intruduce and use a common function
for calculation is a better choose.
Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
Current code is trying to calculate rbio->dbitmap's size to make it
align to sizeof(long), but implement haven't achived this object,
it is align to sizeof(char) instead.
This patch fixed above calculation, and use sizeof(long) instead of
fixed "8" to increate compatibility.
Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
I see no_space in v4.4-rc1 again in xfstests generic/102.
It happened randomly in some node only.
(one of 4 phy-node, and a kvm with non-virtio block driver)
By bisect, we can found the first-bad is:
commit bdced438ac ("block: setup bi_phys_segments after splitting")'
But above patch only triggered the bug by making bio operation
faster(or slower).
Main reason is in our space_allocating code, we need to commit
page writeback before wait it complish, this patch fixed above
bug.
BTW, there is another reason for generic/102 fail, caused by
disable default mixed-blockgroup, I'll fix it in xfstests.
Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
wait_for_snapshot_creation() is in same group with oher two:
btrfs_start_write_no_snapshoting()
btrfs_end_write_no_snapshoting()
Rename wait_for_snapshot_creation() and move it into same place
with other two.
Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
size_t write_bytes is not necessary for btrfs_copy_from_user(),
delete it.
Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
Old code used bbio->raid_map to determine whether in raid56
write/recover operation, because we didn't't have bbio->map_type.
Now we have direct way for this condition, rid of using
the function-relative data, and make the code more readable.
Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
