Using struct drm_device.pdev is deprecated. Upcast with to_pci_dev()
from struct drm_device.dev to get the PCI device structure.
v9:
* fix remaining pdev references
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Fixes: ba4e0339a6 ("drm/ast: Fixed CVE for DP501")
Cc: KuoHsiang Chou <kuohsiang_chou@aspeedtech.com>
Cc: kernel test robot <lkp@intel.com>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Dave Airlie <airlied@redhat.com>
Cc: dri-devel@lists.freedesktop.org
Link: https://patchwork.freedesktop.org/patch/msgid/20210429105101.25667-2-tzimmermann@suse.de
[Bug][DP501]
If ASPEED P2A (PCI to AHB) bridge is disabled and disallowed for
CVE_2019_6260 item3, and then the monitor's EDID is unable read through
Parade DP501.
The reason is the DP501's FW is mapped to BMC addressing space rather
than Host addressing space.
The resolution is that using "pci_iomap_range()" maps to DP501's FW that
stored on the end of FB (Frame Buffer).
In this case, FrameBuffer reserves the last 2MB used for the image of
DP501.
Signed-off-by: KuoHsiang Chou <kuohsiang_chou@aspeedtech.com>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20210421085859.17761-1-kuohsiang_chou@aspeedtech.com
The commit 7cbb93d898 ("drm/ast: Use managed pci functions")
converted a few PCI accessors to the managed API and dropped the
manual pci_iounmap() calls, but it seems to have forgotten converting
pci_iomap() to the managed one. It resulted in the leftover resources
after the driver unbind. Let's fix them.
Fixes: 7cbb93d898 ("drm/ast: Use managed pci functions")
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20210421170458.21178-1-tiwai@suse.de
Many drivers reference the plane->state pointer in order to get the
current plane state in their atomic_update or atomic_disable hooks,
which would be the new plane state in the global atomic state since
_swap_state happened when those hooks are run.
Use the drm_atomic_get_new_plane_state helper to get that state to make it
more obvious.
This was made using the coccinelle script below:
@ plane_atomic_func @
identifier helpers;
identifier func;
@@
(
static const struct drm_plane_helper_funcs helpers = {
...,
.atomic_disable = func,
...,
};
|
static const struct drm_plane_helper_funcs helpers = {
...,
.atomic_update = func,
...,
};
)
@ adds_new_state @
identifier plane_atomic_func.func;
identifier plane, state;
identifier new_state;
@@
func(struct drm_plane *plane, struct drm_atomic_state *state)
{
...
- struct drm_plane_state *new_state = plane->state;
+ struct drm_plane_state *new_state = drm_atomic_get_new_plane_state(state, plane);
...
}
@ include depends on adds_new_state @
@@
#include <drm/drm_atomic.h>
@ no_include depends on !include && adds_new_state @
@@
+ #include <drm/drm_atomic.h>
#include <drm/...>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20210219120032.260676-1-maxime@cerno.tech
The current atomic helpers have either their object state being passed as
an argument or the full atomic state.
The former is the pattern that was done at first, before switching to the
latter for new hooks or when it was needed.
Let's convert all the remaining helpers to provide a consistent
interface, starting with the planes atomic_check.
The conversion was done using the coccinelle script below plus some
manual changes for vmwgfx, built tested on all the drivers.
@@
identifier plane, plane_state;
symbol state;
@@
struct drm_plane_helper_funcs {
...
int (*atomic_check)(struct drm_plane *plane,
- struct drm_plane_state *plane_state);
+ struct drm_atomic_state *state);
...
}
@ plane_atomic_func @
identifier helpers;
identifier func;
@@
static const struct drm_plane_helper_funcs helpers = {
...,
.atomic_check = func,
...,
};
@@
struct drm_plane_helper_funcs *FUNCS;
identifier f;
identifier dev;
identifier plane, plane_state, state;
@@
f(struct drm_device *dev, struct drm_atomic_state *state)
{
<+...
- FUNCS->atomic_check(plane, plane_state)
+ FUNCS->atomic_check(plane, state)
...+>
}
@ ignores_new_state @
identifier plane_atomic_func.func;
identifier plane, new_plane_state;
@@
func(struct drm_plane *plane, struct drm_plane_state *new_plane_state)
{
... when != new_plane_state
}
@ adds_new_state depends on plane_atomic_func && !ignores_new_state @
identifier plane_atomic_func.func;
identifier plane, new_plane_state;
@@
func(struct drm_plane *plane, struct drm_plane_state *new_plane_state)
{
+ struct drm_plane_state *new_plane_state = drm_atomic_get_new_plane_state(state, plane);
...
}
@ depends on plane_atomic_func @
identifier plane_atomic_func.func;
identifier plane, new_plane_state;
@@
func(struct drm_plane *plane,
- struct drm_plane_state *new_plane_state
+ struct drm_atomic_state *state
)
{ ... }
@ include depends on adds_new_state @
@@
#include <drm/drm_atomic.h>
@ no_include depends on !include && adds_new_state @
@@
+ #include <drm/drm_atomic.h>
#include <drm/...>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20210219120032.260676-4-maxime@cerno.tech
We used to update the cursor image in prepare_fb. Move all this code to
atomic_update (where it belongs). The generic helper for shadow-buffered
planes now implement the cursor plane's prepare_fb.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210209134632.12157-11-tzimmermann@suse.de
As HW cursor BOs never move, we can store the offset in VRAM in the
cursor-plane's HWC state. This removes the last possible source of
runtime errors from atomic_update.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210209134632.12157-10-tzimmermann@suse.de
The BOs of the hardware cursor are now mapped permanently while the
cursor plane is being used. This reduces the CPU overhead of the cursor
plane's atomic_update function.
The change also resolves a problem with the vmap call in the commit tail.
The vmap implementation could acquire the DMA reservation lock on the
BO, which is not allowed that late in the atomic update. Removing the
vmap call from atomic_update fixes the issue.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210209134632.12157-9-tzimmermann@suse.de
Cursor state is currently located throughout struct ast_private. Having
struct ast_cursor_plane as dedicated data structure for cursors helps to
organize the modesetting code.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210209134632.12157-7-tzimmermann@suse.de
The logic for cursor updates is now located in the cursor plane's
modesetting code. A number of helper functions remain to modify the
rsp registers and image.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210209134632.12157-6-tzimmermann@suse.de
This change will help with inlining cursor functions into modesetting
code. The primary plane's field used to be cleared with memset(). This
has been dropped as the memory is always allocated with kzalloc().
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210209134632.12157-4-tzimmermann@suse.de
Use AST_MAX_HWC_HEIGHT for setting offset_y in the cursor plane's
atomic_check. The code used AST_MAX_HWC_WIDTH instead. This worked
because both constants has the same value.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210209134632.12157-3-tzimmermann@suse.de
To support legacy gamma ioctls the drivers need to set
drm_crtc_funcs.gamma_set either to a custom implementation or to
drm_atomic_helper_legacy_gamma_set. Most of the atomic drivers do the
latter.
We can simplify this by making the core handle it automatically.
Move the drm_atomic_helper_legacy_gamma_set() functionality into
drm_color_mgmt.c to make drm_mode_gamma_set_ioctl() use
drm_crtc_funcs.gamma_set if set or GAMMA_LUT property if not.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Philippe Cornu <philippe.cornu@st.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201211114237.213288-2-tomi.valkeinen@ti.com
The HW cursor's BO used to be mapped permanently into the kernel's
address space. GEM's vmap operation will be protected by locks, and
we don't want to lock the BO's for an indefinate period of time.
Change the cursor code to map the HW BOs only during updates. The
vmap operation in VRAM helpers is cheap, as a once estabished mapping
is being reused until the BO actually moves. As the HW cursor BOs are
permanently pinned, they never move at all.
v2:
* fix typos in commit description
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20201209142527.26415-3-tzimmermann@suse.de
This patch replaces the vmap/vunmap's use of raw pointers in GEM object
functions with instances of struct dma_buf_map. GEM backends are
converted as well. For most of them, this simply changes the returned type.
TTM-based drivers now return information about the location of the memory,
either system or I/O memory. GEM VRAM helpers and qxl now use ttm_bo_vmap()
et al. Amdgpu, nouveau and radeon use drm_gem_ttm_vmap() et al instead of
implementing their own vmap callbacks.
v7:
* init QXL cursor to mapped BO buffer (kernel test robot)
v5:
* update vkms after switch to shmem
v4:
* use ttm_bo_vmap(), drm_gem_ttm_vmap(), et al. (Daniel, Christian)
* fix a trailing { in drm_gem_vmap()
* remove several empty functions instead of converting them (Daniel)
* comment uses of raw pointers with a TODO (Daniel)
* TODO list: convert more helpers to use struct dma_buf_map
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Christian König <christian.koenig@amd.com>
Tested-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20201103093015.1063-7-tzimmermann@suse.de
Only the following drivers aren't converted:
- amdgpu, because of the driver_feature mangling due to virt support.
Subsequent patch will address this.
- nouveau, because DRIVER_ATOMIC uapi is still not the default on the
platforms where it's supported (i.e. again driver_feature mangling)
- vc4, again because of driver_feature mangling
- qxl, because the ioctl table is somewhere else and moving that is
maybe a bit too much, hence the num_ioctls assignment prevents a
const driver structure.
- arcpgu, because that is stuck behind a pending tiny-fication series
from me.
- legacy drivers, because legacy requires non-const drm_driver.
Note that for armada I also went ahead and made the ioctl array const.
Only cc'ing the driver people who've not been converted (everyone else
is way too much).
v2: Fix one misplaced const static, should be static const (0day)
v3:
- Improve commit message (Sam)
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Cc: kernel test robot <lkp@intel.com>
Acked-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: virtualization@lists.linux-foundation.org
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Eric Anholt <eric@anholt.net>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: nouveau@lists.freedesktop.org
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201104100425.1922351-5-daniel.vetter@ffwll.ch
The gamma LUT has to be reloaded after changing the primary plane's
color format. This used to be done implicitly by the CRTC atomic_enable()
helper after updating the primary plane. With the recent reordering of
the steps, the primary plane's setup was moved last and invalidated
the gamma LUT. Fix this by setting the LUT from within atomic_flush().
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Fixes: 2f0ddd89fe ("drm/ast: Enable CRTC before planes")
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Dave Airlie <airlied@redhat.com>
Cc: dri-devel@lists.freedesktop.org
Link: https://patchwork.freedesktop.org/patch/msgid/20200922144655.23624-1-tzimmermann@suse.de
This change simplifies ast's modesetting code. The display mode
is now programmed from within the CRTC's atomic_enable(), which
only runs if we actually want to program the mode.
Corresponding code in atomic_flush() is being removed. Also removed
is atomic_begin(), which serves no purpose at all.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200914072236.19398-4-tzimmermann@suse.de
The ast HW cursor requires the primary plane and CRTC to display at
a valid mode and format. This is not the case while switching
display modes, which can lead to the screen turing permanently dark.
As a workaround, the ast driver now disables active planes while the
mode or format switch takes place. It also synchronizes with the vertical
refresh to give CRTC and planes some time to catch up on each other.
The active planes planes (primary or cursor) will be re-enabled by
each plane's atomic_update() function.
v3:
* move the logic into the CRTC's atomic_disable function
v2:
* move the logic into the commit-tail function
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200914072236.19398-3-tzimmermann@suse.de
The atomic modesetting code tried to distinguish format changes from
full modesetting operations. But the implementation was buggy and the
format registers were often updated even for simple pageflips.
Fix this problem by handling format changes in the primary plane's
update function.
v3:
* program format in primary plane's update function
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200914072236.19398-2-tzimmermann@suse.de
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAl9VerweHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGhc4H/iHD6qLdB36gZB6K
oc2nJyrqyWitv4ti2Mnt5PA7o4wX4l6nnr1QvoaJ4BRs5Ja1czRvb2XDmdzqAoIA
xITGoafqaAeDfxQ91bWrJsVN0pCRKiGwddXlU7TWmqw/riAkfOqi6GYKvav4biJH
+n1mUPQb1M2IbRFsqkAS+ebKHq3CWaRvzKOEneS88nGlL5u31S9NAru8Ru/fkxRn
6CwGcs1XRaBPYaZAhdfIb0NuatUlpkhPC9yhNS9up6SqrWmK3m65vmFVng6H0eCF
fwn1jVztboY/XcNAi5sM9ExpQCql6WLQEEktVikqRDojC8fVtSx6W55tPt7qeaoO
Z6t4/DA=
=bcA4
-----END PGP SIGNATURE-----
Merge tag 'v5.9-rc4' into drm-next
Backmerge 5.9-rc4 as there is a nasty qxl conflict
that needs to be resolved.
Signed-off-by: Dave Airlie <airlied@redhat.com>
sparse complains about having 2 "__iomem" attributes on the same line
where only one is needed since the first one applies to everything
up to the ending ';'.
However, to make it clear(er) that both of these pointers are
"__iomem", use separate lines for them.
../drivers/gpu/drm/ast/ast_cursor.c:256:26: CK: warning: duplicate [noderef]
../drivers/gpu/drm/ast/ast_cursor.c:256:26: CK: error: multiple address space given: __iomem & __iomem
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Dave Airlie <airlied@redhat.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/a8185578-a69a-16b0-6fdf-f4e46bc4f61f@infradead.org
This turns the ast's device cleanup code into a managed release helper
function. Note that the code uses devres helpers. The release function
switches the device back to VGA mode and therefore runs during HW device
cleanup; not at DRM device cleanup.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200730135206.30239-10-tzimmermann@suse.de
The ast driver loads firmware for the DP501 display encoder. The
patch replaces the removal code with a managed release function.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200730135206.30239-8-tzimmermann@suse.de
Turns struct ast_private into a subclass of struct drm_device by
embedding the latter. This allows for using DRM's managed device
allocation.
The use of struct drm_device.dev_private is deprecated. The patch
converts the last remaining users to to_ast_private().
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200730135206.30239-7-tzimmermann@suse.de
Several places in ast use ast->dev, when a dev pointer is already
available within the function. Remove the extra indirection. No
functional changes made.
This is just a small cleanup before embedding the DRM device instance
in struct ast_private.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200730135206.30239-6-tzimmermann@suse.de
The ast code still references dev_private in several place when looking
up the ast device structure. Convert the remaining locations to use
to_ast_private().
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200730135206.30239-5-tzimmermann@suse.de
The ast driver's load and unload functions are left-overs from when
struct drm_driver.load/unload was still in use. The PCI probe helper
allocated the DRM device and ran load to initialize it.
This patch replaces this code with device create and destroy. The
main difference is that the device's create function allocates the
DRM device and ast structures in the same place. This will be required
for switching ast to managed allocations.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200730135206.30239-4-tzimmermann@suse.de
Putting the DRM driver to the top of the file and the PCI code to the
bottom makes ast_drv.c more readable. While at it, the patch prefixes
file-scope variables with ast_.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200730135206.30239-3-tzimmermann@suse.de
