Pull scheduler updates from Ingo Molnar:
"The main updates in this cycle were:
- Group balancing enhancements and cleanups (Brendan Jackman)
- Move CPU isolation related functionality into its separate
kernel/sched/isolation.c file, with related 'housekeeping_*()'
namespace and nomenclature et al. (Frederic Weisbecker)
- Improve the interactive/cpu-intense fairness calculation (Josef
Bacik)
- Improve the PELT code and related cleanups (Peter Zijlstra)
- Improve the logic of pick_next_task_fair() (Uladzislau Rezki)
- Improve the RT IPI based balancing logic (Steven Rostedt)
- Various micro-optimizations:
- better !CONFIG_SCHED_DEBUG optimizations (Patrick Bellasi)
- better idle loop (Cheng Jian)
- ... plus misc fixes, cleanups and updates"
* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (54 commits)
sched/core: Optimize sched_feat() for !CONFIG_SCHED_DEBUG builds
sched/sysctl: Fix attributes of some extern declarations
sched/isolation: Document isolcpus= boot parameter flags, mark it deprecated
sched/isolation: Add basic isolcpus flags
sched/isolation: Move isolcpus= handling to the housekeeping code
sched/isolation: Handle the nohz_full= parameter
sched/isolation: Introduce housekeeping flags
sched/isolation: Split out new CONFIG_CPU_ISOLATION=y config from CONFIG_NO_HZ_FULL
sched/isolation: Rename is_housekeeping_cpu() to housekeeping_cpu()
sched/isolation: Use its own static key
sched/isolation: Make the housekeeping cpumask private
sched/isolation: Provide a dynamic off-case to housekeeping_any_cpu()
sched/isolation, watchdog: Use housekeeping_cpumask() instead of ad-hoc version
sched/isolation: Move housekeeping related code to its own file
sched/idle: Micro-optimize the idle loop
sched/isolcpus: Fix "isolcpus=" boot parameter handling when !CONFIG_CPUMASK_OFFSTACK
x86/tsc: Append the 'tsc=' description for the 'tsc=unstable' boot parameter
sched/rt: Simplify the IPI based RT balancing logic
block/ioprio: Use a helper to check for RT prio
sched/rt: Add a helper to test for a RT task
...
Pull core locking updates from Ingo Molnar:
"The main changes in this cycle are:
- Another attempt at enabling cross-release lockdep dependency
tracking (automatically part of CONFIG_PROVE_LOCKING=y), this time
with better performance and fewer false positives. (Byungchul Park)
- Introduce lockdep_assert_irqs_enabled()/disabled() and convert
open-coded equivalents to lockdep variants. (Frederic Weisbecker)
- Add down_read_killable() and use it in the VFS's iterate_dir()
method. (Kirill Tkhai)
- Convert remaining uses of ACCESS_ONCE() to
READ_ONCE()/WRITE_ONCE(). Most of the conversion was Coccinelle
driven. (Mark Rutland, Paul E. McKenney)
- Get rid of lockless_dereference(), by strengthening Alpha atomics,
strengthening READ_ONCE() with smp_read_barrier_depends() and thus
being able to convert users of lockless_dereference() to
READ_ONCE(). (Will Deacon)
- Various micro-optimizations:
- better PV qspinlocks (Waiman Long),
- better x86 barriers (Michael S. Tsirkin)
- better x86 refcounts (Kees Cook)
- ... plus other fixes and enhancements. (Borislav Petkov, Juergen
Gross, Miguel Bernal Marin)"
* 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (70 commits)
locking/x86: Use LOCK ADD for smp_mb() instead of MFENCE
rcu: Use lockdep to assert IRQs are disabled/enabled
netpoll: Use lockdep to assert IRQs are disabled/enabled
timers/posix-cpu-timers: Use lockdep to assert IRQs are disabled/enabled
sched/clock, sched/cputime: Use lockdep to assert IRQs are disabled/enabled
irq_work: Use lockdep to assert IRQs are disabled/enabled
irq/timings: Use lockdep to assert IRQs are disabled/enabled
perf/core: Use lockdep to assert IRQs are disabled/enabled
x86: Use lockdep to assert IRQs are disabled/enabled
smp/core: Use lockdep to assert IRQs are disabled/enabled
timers/hrtimer: Use lockdep to assert IRQs are disabled/enabled
timers/nohz: Use lockdep to assert IRQs are disabled/enabled
workqueue: Use lockdep to assert IRQs are disabled/enabled
irq/softirqs: Use lockdep to assert IRQs are disabled/enabled
locking/lockdep: Add IRQs disabled/enabled assertion APIs: lockdep_assert_irqs_enabled()/disabled()
locking/pvqspinlock: Implement hybrid PV queued/unfair locks
locking/rwlocks: Fix comments
x86/paravirt: Set up the virt_spin_lock_key after static keys get initialized
block, locking/lockdep: Assign a lock_class per gendisk used for wait_for_completion()
workqueue: Remove now redundant lock acquisitions wrt. workqueue flushes
...
Pull RCU updates from Ingo Molnar:
"The main changes in this cycle are:
- Documentation updates
- RCU CPU stall-warning updates
- Torture-test updates
- Miscellaneous fixes
Size wise the biggest updates are to documentation. Excluding
documentation most of the code increase comes from a single commit
which expands debugging"
* 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (24 commits)
srcu: Add parameters to SRCU docbook comments
doc: Rewrite confusing statement about memory barriers
memory-barriers.txt: Fix typo in pairing example
rcu/segcblist: Include rcupdate.h
rcu: Add extended-quiescent-state testing advice
rcu: Suppress lockdep false-positive ->boost_mtx complaints
rcu: Do not include rtmutex_common.h unconditionally
torture: Provide TMPDIR environment variable to specify tmpdir
rcutorture: Dump writer stack if stalled
rcutorture: Add interrupt-disable capability to stall-warning tests
rcu: Suppress RCU CPU stall warnings while dumping trace
rcu: Turn off tracing before dumping trace
rcu: Make RCU CPU stall warnings check for irq-disabled CPUs
sched,rcu: Make cond_resched() provide RCU quiescent state
sched: Make resched_cpu() unconditional
irq_work: Map irq_work_on_queue() to irq_work_on() in !SMP
rcu: Create call_rcu_tasks() kthread at boot time
rcu: Fix up pending cbs check in rcu_prepare_for_idle
memory-barriers: Rework multicopy-atomicity section
memory-barriers: Replace uses of "transitive"
...
When the kernel is compiled with !CONFIG_SCHED_DEBUG support, we expect that
all SCHED_FEAT are turned into compile time constants being propagated
to support compiler optimizations.
Specifically, we expect that code blocks like this:
if (sched_feat(FEATURE_NAME) [&& <other_conditions>]) {
/* FEATURE CODE */
}
are turned into dead-code in case FEATURE_NAME defaults to FALSE, and thus
being removed by the compiler from the finale image.
For this mechanism to properly work it's required for the compiler to
have full access, from each translation unit, to whatever is the value
defined by the sched_feat macro. This macro is defined as:
#define sched_feat(x) (sysctl_sched_features & (1UL << __SCHED_FEAT_##x))
and thus, the compiler can optimize that code only if the value of
sysctl_sched_features is visible within each translation unit.
Since:
029632fbb ("sched: Make separate sched*.c translation units")
the scheduler code has been split into separate translation units
however the definition of sysctl_sched_features is part of
kernel/sched/core.c while, for all the other scheduler modules, it is
visible only via kernel/sched/sched.h as an:
extern const_debug unsigned int sysctl_sched_features
Unfortunately, an extern reference does not allow the compiler to apply
constants propagation. Thus, on !CONFIG_SCHED_DEBUG kernel we still end up
with code to load a memory reference and (eventually) doing an unconditional
jump of a chunk of code.
This mechanism is unavoidable when sched_features can be turned on and off at
run-time. However, this is not the case for "production" kernels compiled with
!CONFIG_SCHED_DEBUG. In this case, sysctl_sched_features is just a constant value
which cannot be changed at run-time and thus memory loads and jumps can be
avoided altogether.
This patch fixes the case of !CONFIG_SCHED_DEBUG kernel by declaring a local version
of the sysctl_sched_features constant for each translation unit. This will
ultimately allow the compiler to perform constants propagation and dead-code
pruning.
Tests have been done, with !CONFIG_SCHED_DEBUG on a v4.14-rc8 with and without
the patch, by running 30 iterations of:
perf bench sched messaging --pipe --thread --group 4 --loop 50000
on a 40 cores Intel(R) Xeon(R) CPU E5-2690 v2 @ 3.00GHz using the
powersave governor to rule out variations due to frequency scaling.
Statistics on the reported completion time:
count mean std min 99% max
v4.14-rc8 30.0 15.7831 0.176032 15.442 16.01226 16.014
v4.14-rc8+patch 30.0 15.5033 0.189681 15.232 15.93938 15.962
... show a 1.8% speedup on average completion time and 0.5% speedup in the
99 percentile.
Signed-off-by: Patrick Bellasi <patrick.bellasi@arm.com>
Signed-off-by: Chris Redpath <chris.redpath@arm.com>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Reviewed-by: Brendan Jackman <brendan.jackman@arm.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Morten Rasmussen <morten.rasmussen@arm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Link: http://lkml.kernel.org/r/20171108184101.16006-1-patrick.bellasi@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Use lockdep to check that IRQs are enabled or disabled as expected. This
way the sanity check only shows overhead when concurrency correctness
debug code is enabled.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: David S . Miller <davem@davemloft.net>
Cc: Lai Jiangshan <jiangshanlai@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tejun Heo <tj@kernel.org>
Link: http://lkml.kernel.org/r/1509980490-4285-12-git-send-email-frederic@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
After commit 674e75411f (sched: cpufreq: Allow remote cpufreq
callbacks) we stopped to always read the utilization for the CPU we
are running the governor on, and instead we read it for the CPU
which we've been told has updated utilization. This is stored in
sugov_cpu->cpu.
The value is set in sugov_register() but we clear it in sugov_start()
which leads to always looking at the utilization of CPU0 instead of
the correct one.
Fix this by consolidating the initialization code into sugov_start().
Fixes: 674e75411f (sched: cpufreq: Allow remote cpufreq callbacks)
Signed-off-by: Chris Redpath <chris.redpath@arm.com>
Reviewed-by: Patrick Bellasi <patrick.bellasi@arm.com>
Reviewed-by: Brendan Jackman <brendan.jackman@arm.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add flags to control NOHZ and domain isolation from "isolcpus=", in
order to centralize the isolation features to a common interface. Domain
isolation remains the default so not to break the existing isolcpus
boot paramater behaviour.
Further flags in the future may include 0hz (1hz tick offload) and timers,
workqueue, RCU, kthread, watchdog, likely all merged together in a
common flag ("async"?). In any case, this will have to be modifiable by
cpusets.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Chris Metcalf <cmetcalf@mellanox.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Luiz Capitulino <lcapitulino@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Wanpeng Li <kernellwp@gmail.com>
Link: http://lkml.kernel.org/r/1509072159-31808-12-git-send-email-frederic@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
We want to centralize the isolation features, to be done by the housekeeping
subsystem and scheduler domain isolation is a significant part of it.
No intended behaviour change, we just reuse the housekeeping cpumask
and core code.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Chris Metcalf <cmetcalf@mellanox.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Luiz Capitulino <lcapitulino@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Wanpeng Li <kernellwp@gmail.com>
Link: http://lkml.kernel.org/r/1509072159-31808-11-git-send-email-frederic@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
We want to centralize the isolation management, done by the housekeeping
subsystem. Therefore we need to handle the nohz_full= parameter from
there.
Since nohz_full= so far has involved unbound timers, watchdog, RCU
and tilegx NAPI isolation, we keep that default behaviour.
nohz_full= will be deprecated in the future. We want to control
the isolation features from the isolcpus= parameter.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Chris Metcalf <cmetcalf@mellanox.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Luiz Capitulino <lcapitulino@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Wanpeng Li <kernellwp@gmail.com>
Link: http://lkml.kernel.org/r/1509072159-31808-10-git-send-email-frederic@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Before we implement isolcpus under housekeeping, we need the isolation
features to be more finegrained. For example some people want NOHZ_FULL
without the full scheduler isolation, others want full scheduler
isolation without NOHZ_FULL.
So let's cut all these isolation features piecewise, at the risk of
overcutting it right now. We can still merge some flags later if they
always make sense together.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Chris Metcalf <cmetcalf@mellanox.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Luiz Capitulino <lcapitulino@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Wanpeng Li <kernellwp@gmail.com>
Link: http://lkml.kernel.org/r/1509072159-31808-9-git-send-email-frederic@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Split the housekeeping config from CONFIG_NO_HZ_FULL. This way we finally
separate the isolation code from NOHZ.
Although a dependency to CONFIG_NO_HZ_FULL remains for now, while the
housekeeping code still deals with NOHZ internals.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Chris Metcalf <cmetcalf@mellanox.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Luiz Capitulino <lcapitulino@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Wanpeng Li <kernellwp@gmail.com>
Link: http://lkml.kernel.org/r/1509072159-31808-8-git-send-email-frederic@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Fit it into the housekeeping_*() namespace.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Chris Metcalf <cmetcalf@mellanox.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Luiz Capitulino <lcapitulino@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Wanpeng Li <kernellwp@gmail.com>
Link: http://lkml.kernel.org/r/1509072159-31808-7-git-send-email-frederic@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Housekeeping code still depends on the nohz_full static key. Since we want
to decouple housekeeping from NOHZ, let's create a housekeeping specific
static key.
It's mostly relevant for calls to is_housekeeping_cpu() from the scheduler.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Chris Metcalf <cmetcalf@mellanox.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Luiz Capitulino <lcapitulino@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Wanpeng Li <kernellwp@gmail.com>
Link: http://lkml.kernel.org/r/1509072159-31808-6-git-send-email-frederic@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Nobody needs to access this detail. housekeeping_cpumask() already
takes care of it.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Chris Metcalf <cmetcalf@mellanox.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Luiz Capitulino <lcapitulino@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Wanpeng Li <kernellwp@gmail.com>
Link: http://lkml.kernel.org/r/1509072159-31808-5-git-send-email-frederic@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The housekeeping code is currently tied to the NOHZ code. As we are
planning to make housekeeping independent from it, start with moving
the relevant code to its own file.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Chris Metcalf <cmetcalf@mellanox.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Luiz Capitulino <lcapitulino@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Wanpeng Li <kernellwp@gmail.com>
Link: http://lkml.kernel.org/r/1509072159-31808-2-git-send-email-frederic@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
cpulist_parse() uses nr_cpumask_bits as a limit to parse the
passed buffer from kernel commandline. What nr_cpumask_bits
represents varies depending upon the CONFIG_CPUMASK_OFFSTACK option:
- If CONFIG_CPUMASK_OFFSTACK=n, then nr_cpumask_bits is the same as
NR_CPUS, which might not represent the # of CPUs that really exist
(default 64). So, there's a chance of a gap between nr_cpu_ids
and NR_CPUS, which ultimately lead towards invalid cpulist_parse()
operation. For example, if isolcpus=9 is passed on an 8 cpu
system (CONFIG_CPUMASK_OFFSTACK=n) it doesn't show the error
that it's supposed to.
This patch fixes this bug by finding the last CPU of the passed
isolcpus= list and checking it against nr_cpu_ids.
It also fixes the error message where the nr_cpu_ids should be
nr_cpu_ids-1, since CPU numbering starts from 0.
Signed-off-by: Rakib Mullick <rakib.mullick@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: adobriyan@gmail.com
Cc: akpm@linux-foundation.org
Cc: longman@redhat.com
Cc: mka@chromium.org
Cc: tj@kernel.org
Link: http://lkml.kernel.org/r/20171023130154.9050-1-rakib.mullick@gmail.com
[ Enhanced the changelog and the kernel message. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
include/linux/cpumask.h | 16 ++++++++++++++++
kernel/sched/topology.c | 4 ++--
2 files changed, 18 insertions(+), 2 deletions(-)
This introduces a "register private expedited" membarrier command which
allows eventual removal of important memory barrier constraints on the
scheduler fast-paths. It changes how the "private expedited" membarrier
command (new to 4.14) is used from user-space.
This new command allows processes to register their intent to use the
private expedited command. This affects how the expedited private
command introduced in 4.14-rc is meant to be used, and should be merged
before 4.14 final.
Processes are now required to register before using
MEMBARRIER_CMD_PRIVATE_EXPEDITED, otherwise that command returns EPERM.
This fixes a problem that arose when designing requested extensions to
sys_membarrier() to allow JITs to efficiently flush old code from
instruction caches. Several potential algorithms are much less painful
if the user register intent to use this functionality early on, for
example, before the process spawns the second thread. Registering at
this time removes the need to interrupt each and every thread in that
process at the first expedited sys_membarrier() system call.
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When a CPU lowers its priority (schedules out a high priority task for a
lower priority one), a check is made to see if any other CPU has overloaded
RT tasks (more than one). It checks the rto_mask to determine this and if so
it will request to pull one of those tasks to itself if the non running RT
task is of higher priority than the new priority of the next task to run on
the current CPU.
When we deal with large number of CPUs, the original pull logic suffered
from large lock contention on a single CPU run queue, which caused a huge
latency across all CPUs. This was caused by only having one CPU having
overloaded RT tasks and a bunch of other CPUs lowering their priority. To
solve this issue, commit:
b6366f048e ("sched/rt: Use IPI to trigger RT task push migration instead of pulling")
changed the way to request a pull. Instead of grabbing the lock of the
overloaded CPU's runqueue, it simply sent an IPI to that CPU to do the work.
Although the IPI logic worked very well in removing the large latency build
up, it still could suffer from a large number of IPIs being sent to a single
CPU. On a 80 CPU box, I measured over 200us of processing IPIs. Worse yet,
when I tested this on a 120 CPU box, with a stress test that had lots of
RT tasks scheduling on all CPUs, it actually triggered the hard lockup
detector! One CPU had so many IPIs sent to it, and due to the restart
mechanism that is triggered when the source run queue has a priority status
change, the CPU spent minutes! processing the IPIs.
Thinking about this further, I realized there's no reason for each run queue
to send its own IPI. As all CPUs with overloaded tasks must be scanned
regardless if there's one or many CPUs lowering their priority, because
there's no current way to find the CPU with the highest priority task that
can schedule to one of these CPUs, there really only needs to be one IPI
being sent around at a time.
This greatly simplifies the code!
The new approach is to have each root domain have its own irq work, as the
rto_mask is per root domain. The root domain has the following fields
attached to it:
rto_push_work - the irq work to process each CPU set in rto_mask
rto_lock - the lock to protect some of the other rto fields
rto_loop_start - an atomic that keeps contention down on rto_lock
the first CPU scheduling in a lower priority task
is the one to kick off the process.
rto_loop_next - an atomic that gets incremented for each CPU that
schedules in a lower priority task.
rto_loop - a variable protected by rto_lock that is used to
compare against rto_loop_next
rto_cpu - The cpu to send the next IPI to, also protected by
the rto_lock.
When a CPU schedules in a lower priority task and wants to make sure
overloaded CPUs know about it. It increments the rto_loop_next. Then it
atomically sets rto_loop_start with a cmpxchg. If the old value is not "0",
then it is done, as another CPU is kicking off the IPI loop. If the old
value is "0", then it will take the rto_lock to synchronize with a possible
IPI being sent around to the overloaded CPUs.
If rto_cpu is greater than or equal to nr_cpu_ids, then there's either no
IPI being sent around, or one is about to finish. Then rto_cpu is set to the
first CPU in rto_mask and an IPI is sent to that CPU. If there's no CPUs set
in rto_mask, then there's nothing to be done.
When the CPU receives the IPI, it will first try to push any RT tasks that is
queued on the CPU but can't run because a higher priority RT task is
currently running on that CPU.
Then it takes the rto_lock and looks for the next CPU in the rto_mask. If it
finds one, it simply sends an IPI to that CPU and the process continues.
If there's no more CPUs in the rto_mask, then rto_loop is compared with
rto_loop_next. If they match, everything is done and the process is over. If
they do not match, then a CPU scheduled in a lower priority task as the IPI
was being passed around, and the process needs to start again. The first CPU
in rto_mask is sent the IPI.
This change removes this duplication of work in the IPI logic, and greatly
lowers the latency caused by the IPIs. This removed the lockup happening on
the 120 CPU machine. It also simplifies the code tremendously. What else
could anyone ask for?
Thanks to Peter Zijlstra for simplifying the rto_loop_start atomic logic and
supplying me with the rto_start_trylock() and rto_start_unlock() helper
functions.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Clark Williams <williams@redhat.com>
Cc: Daniel Bristot de Oliveira <bristot@redhat.com>
Cc: John Kacur <jkacur@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Scott Wood <swood@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20170424114732.1aac6dc4@gandalf.local.home
Signed-off-by: Ingo Molnar <mingo@kernel.org>
find_idlest_group() returns NULL when the local group is idlest. The
caller then continues the find_idlest_group() search at a lower level
of the current CPU's sched_domain hierarchy. find_idlest_group_cpu() is
not consulted and, crucially, @new_cpu is not updated. This means the
search is pointless and we return @prev_cpu from select_task_rq_fair().
This is fixed by initialising @new_cpu to @cpu instead of @prev_cpu.
Signed-off-by: Brendan Jackman <brendan.jackman@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Josef Bacik <jbacik@fb.com>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Dietmar Eggemann <dietmar.eggemann@arm.com>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Morten Rasmussen <morten.rasmussen@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20171005114516.18617-6-brendan.jackman@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
When 'p' is not allowed on any of the CPUs in the sched_domain, we
currently return NULL from find_idlest_group(), and pointlessly
continue the search on lower sched_domain levels (where 'p' is also not
allowed) before returning prev_cpu regardless (as we have not updated
new_cpu).
Add an explicit check for this case, and add a comment to
find_idlest_group(). Now when find_idlest_group() returns NULL, it always
means that the local group is allowed and idlest.
Signed-off-by: Brendan Jackman <brendan.jackman@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Reviewed-by: Josef Bacik <jbacik@fb.com>
Cc: Dietmar Eggemann <dietmar.eggemann@arm.com>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Morten Rasmussen <morten.rasmussen@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20171005114516.18617-5-brendan.jackman@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
When the local group is not allowed we do not modify this_*_load from
their initial value of 0. That means that the load checks at the end
of find_idlest_group cause us to incorrectly return NULL. Fixing the
initial values to ULONG_MAX means we will instead return the idlest
remote group in that case.
Signed-off-by: Brendan Jackman <brendan.jackman@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Reviewed-by: Josef Bacik <jbacik@fb.com>
Cc: Dietmar Eggemann <dietmar.eggemann@arm.com>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Morten Rasmussen <morten.rasmussen@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20171005114516.18617-4-brendan.jackman@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Since commit:
83a0a96a5f ("sched/fair: Leverage the idle state info when choosing the "idlest" cpu")
find_idlest_group_cpu() (formerly find_idlest_cpu) no longer returns -1,
so we can simplify the checking of the return value in find_idlest_cpu().
Signed-off-by: Brendan Jackman <brendan.jackman@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Josef Bacik <jbacik@fb.com>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Dietmar Eggemann <dietmar.eggemann@arm.com>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Morten Rasmussen <morten.rasmussen@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20171005114516.18617-3-brendan.jackman@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
In preparation for changes that would otherwise require adding a new
level of indentation to the while(sd) loop, create a new function
find_idlest_cpu() which contains this loop, and rename the existing
find_idlest_cpu() to find_idlest_group_cpu().
Code inside the while(sd) loop is unchanged. @new_cpu is added as a
variable in the new function, with the same initial value as the
@new_cpu in select_task_rq_fair().
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Brendan Jackman <brendan.jackman@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Josef Bacik <jbacik@fb.com>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Dietmar Eggemann <dietmar.eggemann@arm.com>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Morten Rasmussen <morten.rasmussen@arm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20171005114516.18617-2-brendan.jackman@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The "goto force_balance" here is intended to mitigate the fact that
avg_load calculations can result in bad placement decisions when
priority is asymmetrical.
The original commit that adds it:
fab476228b ("sched: Force balancing on newidle balance if local group has capacity")
explains:
Under certain situations, such as a niced down task (i.e. nice =
-15) in the presence of nr_cpus NICE0 tasks, the niced task lands
on a sched group and kicks away other tasks because of its large
weight. This leads to sub-optimal utilization of the
machine. Even though the sched group has capacity, it does not
pull tasks because sds.this_load >> sds.max_load, and f_b_g()
returns NULL.
A similar but inverted issue also affects ARM big.LITTLE (asymmetrical CPU
capacity) systems - consider 8 always-running, same-priority tasks on a
system with 4 "big" and 4 "little" CPUs. Suppose that 5 of them end up on
the "big" CPUs (which will be represented by one sched_group in the DIE
sched_domain) and 3 on the "little" (the other sched_group in DIE), leaving
one CPU unused. Because the "big" group has a higher group_capacity its
avg_load may not present an imbalance that would cause migrating a
task to the idle "little".
The force_balance case here solves the problem but currently only for
CPU_NEWLY_IDLE balances, which in theory might never happen on the
unused CPU. Including CPU_IDLE in the force_balance case means
there's an upper bound on the time before we can attempt to solve the
underutilization: after DIE's sd->balance_interval has passed the
next nohz balance kick will help us out.
Signed-off-by: Brendan Jackman <brendan.jackman@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Morten Rasmussen <morten.rasmussen@arm.com>
Cc: Paul Turner <pjt@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20170807163900.25180-1-brendan.jackman@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
We use task_util() in find_idlest_group() via capacity_spare_wake().
This task_util() updated in wake_cap(). However wake_cap() is not the
only reason for ending up in find_idlest_group() - we could have been sent
there by wake_wide(). So explicitly sync the task util with prev_cpu
when we are about to head to find_idlest_group().
We could simply do this at the beginning of
select_task_rq_fair() (i.e. irrespective of whether we're heading to
select_idle_sibling() or find_idlest_group() & co), but I didn't want to
slow down the select_idle_sibling() path more than necessary.
Don't do this during fork balancing, we won't need the task_util and
we'd just clobber the last_update_time, which is supposed to be 0.
Signed-off-by: Brendan Jackman <brendan.jackman@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andres Oportus <andresoportus@google.com>
Cc: Dietmar Eggemann <dietmar.eggemann@arm.com>
Cc: Joel Fernandes <joelaf@google.com>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Morten Rasmussen <morten.rasmussen@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Link: http://lkml.kernel.org/r/20170808095519.10077-1-brendan.jackman@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
As a first step this patch makes cfs_tasks list as MRU one.
It means, that when a next task is picked to run on physical
CPU it is moved to the front of the list.
Therefore, the cfs_tasks list is more or less sorted (except
woken tasks) starting from recently given CPU time tasks toward
tasks with max wait time in a run-queue, i.e. MRU list.
Second, as part of the load balance operation, this approach
starts detach_tasks()/detach_one_task() from the tail of the
queue instead of the head, giving some advantages:
- tends to pick a task with highest wait time;
- tasks located in the tail are less likely cache-hot,
therefore the can_migrate_task() decision is higher.
hackbench illustrates slightly better performance. For example
doing 1000 samples and 40 groups on i5-3320M CPU, it shows below
figures:
default: 0.657 avg
patched: 0.646 avg
Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Kirill Tkhai <tkhai@yandex.ru>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Mike Galbraith <umgwanakikbuti@gmail.com>
Cc: Nicolas Pitre <nicolas.pitre@linaro.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Oleksiy Avramchenko <oleksiy.avramchenko@sonymobile.com>
Cc: Paul Turner <pjt@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Link: http://lkml.kernel.org/r/20170913102430.8985-2-urezki@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
On AMD Family17h-based (EPYC) system, a logical NUMA node can contain
upto 8 cores (16 threads) with the following topology.
----------------------------
C0 | T0 T1 | || | T0 T1 | C4
--------| || |--------
C1 | T0 T1 | L3 || L3 | T0 T1 | C5
--------| || |--------
C2 | T0 T1 | #0 || #1 | T0 T1 | C6
--------| || |--------
C3 | T0 T1 | || | T0 T1 | C7
----------------------------
Here, there are 2 last-level (L3) caches per logical NUMA node.
A socket can contain upto 4 NUMA nodes, and a system can support
upto 2 sockets. With full system configuration, current scheduler
creates 4 sched domains:
domain0 SMT (span a core)
domain1 MC (span a last-level-cache)
domain2 NUMA (span a socket: 4 nodes)
domain3 NUMA (span a system: 8 nodes)
Note that there is no domain to represent cpus spaning a logical
NUMA node. With this hierarchy of sched domains, the scheduler does
not balance properly in the following cases:
Case1:
When running 8 tasks, a properly balanced system should
schedule a task per logical NUMA node. This is not the case for
the current scheduler.
Case2:
In some cases, threads are scheduled on the same cpu, while other
cpus are idle. This results in run-to-run inconsistency. For example:
taskset -c 0-7 sysbench --num-threads=8 --test=cpu \
--cpu-max-prime=100000 run
Total execution time ranges from 25.1s to 33.5s depending on threads
placement, where 25.1s is when all 8 threads are balanced properly
on 8 cpus.
Introducing NUMA identity node sched domain, which is based on how
SRAT/SLIT table define a logical NUMA node. This results in the following
hierarchy of sched domains on the same system described above.
domain0 SMT (span a core)
domain1 MC (span a last-level-cache)
domain2 NODE (span a logical NUMA node)
domain3 NUMA (span a socket: 4 nodes)
domain4 NUMA (span a system: 8 nodes)
This fixes the improper load balancing cases mentioned above.
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: bp@suse.de
Link: http://lkml.kernel.org/r/1504768805-46716-1-git-send-email-suravee.suthikulpanit@amd.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The normal x86_topology on NHM+ machines degenerates because the MC
and CPU domains are of the same size, therefore MC inherits
SD_PREFER_SIBLING from CPU (which then gets taken out). The result is
that we'll spread tasks across the first NUMA level in order to
maximize cache utilization.
However, for the x86_numa_in_package_topology we loose the CPU domain,
and we'll not have SD_PREFER_SIBLING set anywhere, giving a distinct
difference in behaviour.
Commit:
8e7fbcbc22 ("sched: Remove stale power aware scheduling remnants and dysfunctional knobs")
made a fail by not preserving the SD_PREFER_SIBLING for the !power_saving
case on both CPU and MC.
Then commit:
6956dc568f ("sched/numa: Add SD_PERFER_SIBLING to CPU domain")
adds it back to the CPU but not MC.
Restore that now, such that we get consistent spreading behaviour wrt
L3 and NUMA.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
__dl_sub() is more meaningful as a name, and is more consistent
with the naming of the dual function (__dl_add()).
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Luca Abeni <luca.abeni@santannapisa.it>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Daniel Bristot de Oliveira <bristot@redhat.com>
Cc: Juri Lelli <juri.lelli@arm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1504778971-13573-4-git-send-email-luca.abeni@santannapisa.it
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Fix a bug introduced in:
72f9f3fdc9 ("sched/deadline: Remove dl_new from struct sched_dl_entity")
After that commit, when switching to -deadline if the scheduling
deadline of a task is in the past then switched_to_dl() calls
setup_new_entity() to properly initialize the scheduling deadline
and runtime.
The problem is that the task is enqueued _before_ having its parameters
initialized by setup_new_entity(), and this can cause problems.
For example, a task with its out-of-date deadline in the past will
potentially be enqueued as the highest priority one; however, its
adjusted deadline may not be the earliest one.
This patch fixes the problem by initializing the task's parameters before
enqueuing it.
Signed-off-by: luca abeni <luca.abeni@santannapisa.it>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Daniel Bristot de Oliveira <bristot@redhat.com>
Cc: Juri Lelli <juri.lelli@arm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1504778971-13573-3-git-send-email-luca.abeni@santannapisa.it
Signed-off-by: Ingo Molnar <mingo@kernel.org>
quiet_vmstat() is an expensive function that only makes sense when we
go into NOHZ.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: aubrey.li@linux.intel.com
Cc: cl@linux.com
Cc: fweisbec@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
While load_balance() masks the source CPUs against active_mask, it had
a hole against the destination CPU. Ensure the destination CPU is also
part of the 'domain-mask & active-mask' set.
Reported-by: Levin, Alexander (Sasha Levin) <alexander.levin@verizon.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: 77d1dfda0e ("sched/topology, cpuset: Avoid spurious/wrong domain rebuilds")
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The trivial wake_affine_idle() implementation is very good for a
number of workloads, but it comes apart at the moment there are no
idle CPUs left, IOW. the overloaded case.
hackbench:
NO_WA_WEIGHT WA_WEIGHT
hackbench-20 : 7.362717561 seconds 6.450509391 seconds
(win)
netperf:
NO_WA_WEIGHT WA_WEIGHT
TCP_SENDFILE-1 : Avg: 54524.6 Avg: 52224.3
TCP_SENDFILE-10 : Avg: 48185.2 Avg: 46504.3
TCP_SENDFILE-20 : Avg: 29031.2 Avg: 28610.3
TCP_SENDFILE-40 : Avg: 9819.72 Avg: 9253.12
TCP_SENDFILE-80 : Avg: 5355.3 Avg: 4687.4
TCP_STREAM-1 : Avg: 41448.3 Avg: 42254
TCP_STREAM-10 : Avg: 24123.2 Avg: 25847.9
TCP_STREAM-20 : Avg: 15834.5 Avg: 18374.4
TCP_STREAM-40 : Avg: 5583.91 Avg: 5599.57
TCP_STREAM-80 : Avg: 2329.66 Avg: 2726.41
TCP_RR-1 : Avg: 80473.5 Avg: 82638.8
TCP_RR-10 : Avg: 72660.5 Avg: 73265.1
TCP_RR-20 : Avg: 52607.1 Avg: 52634.5
TCP_RR-40 : Avg: 57199.2 Avg: 56302.3
TCP_RR-80 : Avg: 25330.3 Avg: 26867.9
UDP_RR-1 : Avg: 108266 Avg: 107844
UDP_RR-10 : Avg: 95480 Avg: 95245.2
UDP_RR-20 : Avg: 68770.8 Avg: 68673.7
UDP_RR-40 : Avg: 76231 Avg: 75419.1
UDP_RR-80 : Avg: 34578.3 Avg: 35639.1
UDP_STREAM-1 : Avg: 64684.3 Avg: 66606
UDP_STREAM-10 : Avg: 52701.2 Avg: 52959.5
UDP_STREAM-20 : Avg: 30376.4 Avg: 29704
UDP_STREAM-40 : Avg: 15685.8 Avg: 15266.5
UDP_STREAM-80 : Avg: 8415.13 Avg: 7388.97
(wins and losses)
sysbench:
NO_WA_WEIGHT WA_WEIGHT
sysbench-mysql-2 : 2135.17 per sec. 2142.51 per sec.
sysbench-mysql-5 : 4809.68 per sec. 4800.19 per sec.
sysbench-mysql-10 : 9158.59 per sec. 9157.05 per sec.
sysbench-mysql-20 : 14570.70 per sec. 14543.55 per sec.
sysbench-mysql-40 : 22130.56 per sec. 22184.82 per sec.
sysbench-mysql-80 : 20995.56 per sec. 21904.18 per sec.
sysbench-psql-2 : 1679.58 per sec. 1705.06 per sec.
sysbench-psql-5 : 3797.69 per sec. 3879.93 per sec.
sysbench-psql-10 : 7253.22 per sec. 7258.06 per sec.
sysbench-psql-20 : 11166.75 per sec. 11220.00 per sec.
sysbench-psql-40 : 17277.28 per sec. 17359.78 per sec.
sysbench-psql-80 : 17112.44 per sec. 17221.16 per sec.
(increase on the top end)
tbench:
NO_WA_WEIGHT
Throughput 685.211 MB/sec 2 clients 2 procs max_latency=0.123 ms
Throughput 1596.64 MB/sec 5 clients 5 procs max_latency=0.119 ms
Throughput 2985.47 MB/sec 10 clients 10 procs max_latency=0.262 ms
Throughput 4521.15 MB/sec 20 clients 20 procs max_latency=0.506 ms
Throughput 9438.1 MB/sec 40 clients 40 procs max_latency=2.052 ms
Throughput 8210.5 MB/sec 80 clients 80 procs max_latency=8.310 ms
WA_WEIGHT
Throughput 697.292 MB/sec 2 clients 2 procs max_latency=0.127 ms
Throughput 1596.48 MB/sec 5 clients 5 procs max_latency=0.080 ms
Throughput 2975.22 MB/sec 10 clients 10 procs max_latency=0.254 ms
Throughput 4575.14 MB/sec 20 clients 20 procs max_latency=0.502 ms
Throughput 9468.65 MB/sec 40 clients 40 procs max_latency=2.069 ms
Throughput 8631.73 MB/sec 80 clients 80 procs max_latency=8.605 ms
(increase on the top end)
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Rik van Riel <riel@redhat.com>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Eric reported a sysbench regression against commit:
3fed382b46 ("sched/numa: Implement NUMA node level wake_affine()")
Similarly, Rik was looking at the NAS-lu.C benchmark, which regressed
against his v3.10 enterprise kernel.
PRE (current tip/master):
ivb-ep sysbench:
2: [30 secs] transactions: 64110 (2136.94 per sec.)
5: [30 secs] transactions: 143644 (4787.99 per sec.)
10: [30 secs] transactions: 274298 (9142.93 per sec.)
20: [30 secs] transactions: 418683 (13955.45 per sec.)
40: [30 secs] transactions: 320731 (10690.15 per sec.)
80: [30 secs] transactions: 355096 (11834.28 per sec.)
hsw-ex NAS:
OMP_PROC_BIND/lu.C.x_threads_144_run_1.log: Time in seconds = 18.01
OMP_PROC_BIND/lu.C.x_threads_144_run_2.log: Time in seconds = 17.89
OMP_PROC_BIND/lu.C.x_threads_144_run_3.log: Time in seconds = 17.93
lu.C.x_threads_144_run_1.log: Time in seconds = 434.68
lu.C.x_threads_144_run_2.log: Time in seconds = 405.36
lu.C.x_threads_144_run_3.log: Time in seconds = 433.83
POST (+patch):
ivb-ep sysbench:
2: [30 secs] transactions: 64494 (2149.75 per sec.)
5: [30 secs] transactions: 145114 (4836.99 per sec.)
10: [30 secs] transactions: 278311 (9276.69 per sec.)
20: [30 secs] transactions: 437169 (14571.60 per sec.)
40: [30 secs] transactions: 669837 (22326.73 per sec.)
80: [30 secs] transactions: 631739 (21055.88 per sec.)
hsw-ex NAS:
lu.C.x_threads_144_run_1.log: Time in seconds = 23.36
lu.C.x_threads_144_run_2.log: Time in seconds = 22.96
lu.C.x_threads_144_run_3.log: Time in seconds = 22.52
This patch takes out all the shiny wake_affine() stuff and goes back to
utter basics. Between the two CPUs involved with the wakeup (the CPU
doing the wakeup and the CPU we ran on previously) pick the CPU we can
run on _now_.
This restores much of the regressions against the older kernels,
but leaves some ground in the overloaded case. The default-enabled
WA_WEIGHT (which will be introduced in the next patch) is an attempt
to address the overloaded situation.
Reported-by: Eric Farman <farman@linux.vnet.ibm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matthew Rosato <mjrosato@linux.vnet.ibm.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: jinpuwang@gmail.com
Cc: vcaputo@pengaru.com
Fixes: 3fed382b46 ("sched/numa: Implement NUMA node level wake_affine()")
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Right now, rcutorture warns if an rcu_torture_writer() kthread stalls,
but this warning is not always all that helpful. This commit therefore
makes the first such warning include a stack dump.
This in turn requires that sched_show_task() be exported to GPL modules,
so this commit makes that change as well.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
There is some confusion as to which of cond_resched() or
cond_resched_rcu_qs() should be added to long in-kernel loops.
This commit therefore eliminates the decision by adding RCU quiescent
states to cond_resched(). This commit also simplifies the code that
used to interact with cond_resched_rcu_qs(), and that now interacts with
cond_resched(), to reduce its overhead. This reduction is necessary to
allow the heavier-weight cond_resched_rcu_qs() mechanism to be invoked
everywhere that cond_resched() is invoked.
Part of that reduction in overhead converts the jiffies_till_sched_qs
kernel parameter to read-only at runtime, thus eliminating the need for
bounds checking.
Reported-by: Michal Hocko <mhocko@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
[ paulmck: Keep PREEMPT=n cond_resched a no-op, per Peter Zijlstra. ]
The current implementation of synchronize_sched_expedited() incorrectly
assumes that resched_cpu() is unconditional, which it is not. This means
that synchronize_sched_expedited() can hang when resched_cpu()'s trylock
fails as follows (analysis by Neeraj Upadhyay):
o CPU1 is waiting for expedited wait to complete:
sync_rcu_exp_select_cpus
rdp->exp_dynticks_snap & 0x1 // returns 1 for CPU5
IPI sent to CPU5
synchronize_sched_expedited_wait
ret = swait_event_timeout(rsp->expedited_wq,
sync_rcu_preempt_exp_done(rnp_root),
jiffies_stall);
expmask = 0x20, CPU 5 in idle path (in cpuidle_enter())
o CPU5 handles IPI and fails to acquire rq lock.
Handles IPI
sync_sched_exp_handler
resched_cpu
returns while failing to try lock acquire rq->lock
need_resched is not set
o CPU5 calls rcu_idle_enter() and as need_resched is not set, goes to
idle (schedule() is not called).
o CPU 1 reports RCU stall.
Given that resched_cpu() is now used only by RCU, this commit fixes the
assumption by making resched_cpu() unconditional.
Reported-by: Neeraj Upadhyay <neeraju@codeaurora.org>
Suggested-by: Neeraj Upadhyay <neeraju@codeaurora.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: stable@vger.kernel.org
I had a wee bit of trouble recalling how the calc_group_runnable()
stuff worked.. add hopefully better comments.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Our runnable_weight currently looks like this
runnable_weight = shares * runnable_load_avg / load_avg
The goal is to scale the runnable weight for the group based on its runnable to
load_avg ratio. The problem with this is it biases us towards tasks that never
go to sleep. Tasks that go to sleep are going to have their runnable_load_avg
decayed pretty hard, which will drastically reduce the runnable weight of groups
with interactive tasks. To solve this imbalance we tweak this slightly, so in
the ideal case it is still the above, but in the interactive case it is
runnable_weight = shares * runnable_weight / load_weight
which will make the weight distribution fairer between interactive and
non-interactive groups.
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: kernel-team@fb.com
Cc: linux-kernel@vger.kernel.org
Cc: riel@redhat.com
Cc: tj@kernel.org
Link: http://lkml.kernel.org/r/1501773219-18774-2-git-send-email-jbacik@fb.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The problem with the overestimate is that it will subtract too big a
value from the load_sum, thereby pushing it down further than it ought
to go. Since runnable_load_avg is not subject to a similar 'force',
this results in the occasional 'runnable_load > load' situation.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The PELT _sum values are a saw-tooth function, dropping on the decay
edge and then growing back up again during the window.
When these window-edges are not aligned between cfs_rq and se, we can
have the situation where, for example, on dequeue, the se decays
first.
Its _sum values will be small(er), while the cfs_rq _sum values will
still be on their way up. Because of this, the subtraction:
cfs_rq->avg._sum -= se->avg._sum will result in a positive value. This
will then, once the cfs_rq reaches an edge, translate into its _avg
value jumping up.
This is especially visible with the runnable_load bits, since they get
added/subtracted a lot.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Vincent wondered why his self migrating task had a roughly 50% dip in
load_avg when landing on the new CPU. This is because we uncondionally
take the asynchronous detatch_entity route, which can lead to the
attach on the new CPU still seeing the old CPU's contribution to
tg->load_avg, effectively halving the new CPU's shares.
While in general this is something we have to live with, there is the
special case of runnable migration where we can do better.
Tested-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
