- Clarify the data flows. For SB Live! I fixed only the most obvious
point ("from" vs. "for").
- Mention 7.1 side channels on Audigy.
- Be unspecific about the output DACs on Audigy, as lots of variants
actually exist (see emu_chip_details table).
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230825222157.170978-2-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Let the MANUALS/PATENTS section of the former simply refer to the latter
- there is no point in duplicating this information with little value to
end users.
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230825222157.170978-1-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Update the documentation about the PCM copy callbacks.
The update was kept minimalistic, just correcting the use of copy_user
ops with the single copy ops, and drop/update the text mentioning the
copy_kernel.
Link: https://lore.kernel.org/r/20230815190136.8987-24-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
For gapless playback it is possible that each track can have different
codec profile with same decoder, for example we have WMA album,
we may have different tracks as WMA v9, WMA v10 and so on
Or if DSP's like QDSP have abililty to switch decoders on single stream
for each track, then this call could be used to set new codec parameters.
Existing code does not allow to change this profile while doing gapless
playback.
Reuse existing SNDRV_COMPRESS_SET_PARAMS to set this new track params along
some additional checks to enforce proper state machine.
With this new changes now the user can call SNDRV_COMPRESS_SET_PARAMS
anytime after setting next track and additional check in write should
also ensure that params are set before writing new data.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Acked-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20230619092805.21649-1-srinivas.kandagatla@linaro.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
As the updated MIDI 2.0 spec has been published freshly, this is a
catch up to add the support for new specs, especially UMP v1.1
features, on Linux kernel.
The new UMP v1.1 introduced the concept of Function Blocks (FB), which
is a kind of superset of USB MIDI 2.0 Group Terminal Blocks (GTB).
The patch set adds the support for FB as the primary information
source while keeping the parse of GTB as fallback. Also UMP v1.1
supports the groupless messages, the protocol switch, static FBs, and
other new fundamental features, and those are supported as well.
Link: https://www.midi.org/midi-articles/details-about-midi-2-0-midi-ci-profiles-and-property-exchange
Link: https://lore.kernel.org/r/20230612081054.17200-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add documentation for the new Virtual PCM Test Driver. It covers all
possible usage cases: errors and delay injections, random and
pattern-based data generation, playback and ioctl redefinition
functionalities testing.
We have a lot of different virtual media drivers, which can be used for
testing of the userspace applications and media subsystem middle layer.
However, all of them are aimed at testing the video functionality and
simulating the video devices. For audio devices we have only snd-dummy
module, which is good in simulating the correct behavior of an ALSA device.
I decided to write a tool, which would help to test the userspace ALSA
programs (and the PCM middle layer as well) under unusual circumstances
to figure out how they would behave. So I came up with this Virtual PCM
Test Driver.
This new Virtual PCM Test Driver has several features which can be useful
during the userspace ALSA applications testing/fuzzing, or testing/fuzzing
of the PCM middle layer. Not all of them can be implemented using the
existing virtual drivers (like dummy or loopback). Here is what can this
driver do:
- Simulate both capture and playback processes
- Check the playback stream for containing the looped pattern
- Generate random or pattern-based capture data
- Inject delays into the playback and capturing processes
- Inject errors during the PCM callbacks
Also, this driver can check the playback stream for containing the
predefined pattern, which is used in the corresponding selftest to check
the PCM middle layer data transferring functionality. Additionally, this
driver redefines the default RESET ioctl, and the selftest covers this PCM
API functionality as well.
The driver supports both interleaved and non-interleaved access modes, and
have separate pattern buffers for each channel. The driver supports up to
4 channels and up to 8 substreams.
Signed-off-by: Ivan Orlov <ivan.orlov0322@gmail.com>
Acked-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20230606193254.20791-1-ivan.orlov0322@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This is a (largish) patch set for adding the support of MIDI 2.0
functionality, mainly targeted for USB devices. MIDI 2.0 is a
complete overhaul of the 40-years old MIDI 1.0. Unlike MIDI 1.0 byte
stream, MIDI 2.0 uses packets in 32bit words for Universal MIDI Packet
(UMP) protocol. It supports both MIDI 1.0 commands for compatibility
and the extended MIDI 2.0 commands for higher resolutions and more
functions.
For supporting the UMP, the patch set extends the existing ALSA
rawmidi and sequencer interfaces, and adds the USB MIDI 2.0 support to
the standard USB-audio driver.
The rawmidi for UMP has a different device name (/dev/snd/umpC*D*) and
it reads/writes UMP packet data in 32bit CPU-native endianness. For
the old MIDI 1.0 applications, the legacy rawmidi interface is
provided, too.
As default, USB-audio driver will take the alternate setting for MIDI
2.0 interface, and the compatibility with MIDI 1.0 is provided via the
rawmidi common layer. However, user may let the driver falling back
to the old MIDI 1.0 interface by a module option, too.
A UMP-capable rawmidi device can create the corresponding ALSA
sequencer client(s) to support the UMP Endpoint and UMP Group
connections. As a nature of ALSA sequencer, arbitrary connections
between clients/ports are allowed, and the ALSA sequencer core
performs the automatic conversions for the connections between a new
UMP sequencer client and a legacy MIDI 1.0 sequencer client. It
allows the existing application to use MIDI 2.0 devices without
changes.
The MIDI-CI, which is another major extension in MIDI 2.0, isn't
covered by this patch set. It would be implemented rather in
user-space.
Roughly speaking, the first half of this patch set is for extending
the rawmidi and USB-audio, and the second half is for extending the
ALSA sequencer interface.
The patch set is based on 6.4-rc2 kernel, but all patches can be
cleanly applicable on 6.2 and 6.3 kernels, too (while 6.1 and older
kernels would need minor adjustment for uapi header changes).
The updates for alsa-lib and alsa-utils will follow shortly later.
The author thanks members of MIDI Association OS/API Working Group,
especially Andrew Mee, for great helps for the initial design and
debugging / testing the drivers.
Link: https://lore.kernel.org/r/20230523075358.9672-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add the brief document for describing the MIDI 2.0 implementation on
Linux kernel. Both rawmidi and sequencer API extensions are
described.
Acked-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20230523075358.9672-38-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The mixer structures were filled in two places: on driver init, and when
the devices are opened. The latter made the former pointless, so we
remove the former. This implies that mixer dumps may now return all
zeroes, which is OK, as restoring them is meaningless as well.
Things were even weirder for the (generally unused) secondary sends:
Some of the initialization loops were forgotten when support for Audigy
was added, thus creating the technically illegal state of multiple sends
being routed to the same FX accumulator (though it apparently doesn't
matter when the amount is zero).
The global multi-channel init used some rather bizarre values for the
secondary sends, and the init on open actually forgot to re-initialize
them. We now use a not really more useful, but simpler formula.
The direct register init was also bogus. This doesn't really matter, as
the value is overwritten when a voice comes into use, but still.
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230516093612.3536451-2-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The voice volume is a raw fractional multiplier that can't actually
represent 1.0. To still enable real pass-through, we now set the volume
to 0.5 (which results in no loss of precision, as the FX bus provides
fractional values) and scale up the samples in DSP code.
To maintain backwards compatibility with existing configuration files,
we rescale the values in the mixer controls. The range is extended
upwards from 0xffff to 0x1fffd, which actually introduces the
possibility of specifying an amplification.
There is still a minor incompatibility with user space, namely if
someone loaded custom DSP code. They'll just get half the volume, so
this doesn't seem like a big deal.
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230514170323.3408834-8-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Common ALSA module parameters look a little bit confusing because of the
description lacking, and it took me a while to understand the purpose of
their existence. To figure it out I asked the question about them to the
"alsa-devel" mailing list, and Takashi Iwai answered me with the text I
appended to the ALSA documentation in this patch.
These common module parameters aren't used a lot nowadays, but as I
understand they are important for providing compatibility with some
existing user-space apps. So in my opinion it is a good idea to document
why we need them.
Signed-off-by: Ivan Orlov <ivan.orlov0322@gmail.com>
Link: https://lore.kernel.org/r/20230501101634.476297-1-ivan.orlov0322@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The bulk of the commits here are for the conversion of drivers to use
void remove callbacks but there's a reasonable amount of other stuff
going on, the pace of development with the SOF code continues to be high
and there's a bunch of new drivers too:
- More core cleanups from Morimto-san.
- Update drivers to have remove() callbacks returning void, mostly
mechanical with some substantial changes.
- Continued feature and simplification work on SOF, including addition
of a no-DSP mode for bringup, HDA MLink and extensions to the IPC4
protocol.
- Hibernation support for CS35L45.
- More DT binding conversions.
- Support for Cirrus Logic CS35L56, Freescale QMC, Maxim MAX98363,
nVidia systems with MAX9809x and RT5631, Realtek RT712, Renesas R-Car
Gen4, Rockchip RK3588 and TI TAS5733.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmRGdEsACgkQJNaLcl1U
h9BNVAf+Ijupg3dhAl6847v1PRYXkYK6YjAayhNd0xRoRePKnnv1zkrsXSBzxZUM
8KHpQDUJyfQbPnE2JRmr1WfHSoNDl/NXdJl+lefPBgol5bzxRji68hDPGjA0645o
R6vzrqLNw8mh3jwptXfEpQfKH8tIvwOeMeLkncDvsm0ZCUR2GhYnjB1g82ih0ssx
lvh36PdCRF0e/ruHxkiVn9b/riID65oTRkN6IxJqoPnqJZVyCiqmiJcfWePpaPir
4R9Dyk+REos/aCLdne1g6H21Tgi0td+blv6empqwdEXG41VSdRMTrOZb1ZISKmpF
ggPbKsk9BjJFBCewllHXJ0YEcBp9/g==
=TVxt
-----END PGP SIGNATURE-----
Merge tag 'asoc-v6.4' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-next
ASoC: Updates for v6.4
The bulk of the commits here are for the conversion of drivers to use
void remove callbacks but there's a reasonable amount of other stuff
going on, the pace of development with the SOF code continues to be high
and there's a bunch of new drivers too:
- More core cleanups from Morimto-san.
- Update drivers to have remove() callbacks returning void, mostly
mechanical with some substantial changes.
- Continued feature and simplification work on SOF, including addition
of a no-DSP mode for bringup, HDA MLink and extensions to the IPC4
protocol.
- Hibernation support for CS35L45.
- More DT binding conversions.
- Support for Cirrus Logic CS35L56, Freescale QMC, Maxim MAX98363,
nVidia systems with MAX9809x and RT5631, Realtek RT712, Renesas R-Car
Gen4, Rockchip RK3588 and TI TAS5733.
- Update some outdated info
- Language fixes
- Whitespace/formatting fixes
- Prefer attached over stand-alone '::'
[ dropped a trailing white space in the patch -- tiwai ]
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230421112751.990244-1-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The auto-silencer supports two modes: "thresholded" to fill up "just
enough", and "top-up" to fill up "as much as possible". The two modes
used rather distinct code paths, which this patch unifies. The only
remaining distinction is how much we actually want to fill.
This fixes a bug in thresholded mode, where we failed to use new_hw_ptr,
resulting in under-fill.
Top-up mode is now more well-behaved and much easier to understand in
corner cases.
This also updates comments in the proximity of silencing-related data
structures.
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20230420113324.877164-1-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add description of 'Skylake' multi-link structure added in 2015 and
recent extensions to support SoundWire/DMIC/SSP interfaces.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20230404104127.5629-2-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Like the other boards from the D*45* series, this one sets up the
outputs not quite correctly.
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230405201220.2197826-1-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Enhance the documents about the PCM, missing descriptions for a couple
of helpers like snd_pcm_period_elapsed_under_stream_lock() and
snd_pcm_stop_xrun().
Link: https://lore.kernel.org/r/20230323065237.5062-4-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
changes include:
- Some significant additions to the memory-management documentation
- Some improvements to navigation in the HTML-rendered docs
- More Spanish and Chinese translations
...and the usual set of typo fixes and such.
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEIw+MvkEiF49krdp9F0NaE2wMflgFAmPzkQUPHGNvcmJldEBs
d24ubmV0AAoJEBdDWhNsDH5YC0QH/09u10xV3N+RuveNE/tArVxKcQi7JZd/xugQ
toSXygh64WY10lzwi7Ms1bHZzpPYB0fOrqTGNqNQuhrVTjQzaZB0BBJqm8lwt2w/
S/Z5wj+IicJTmQ7+0C2Hc/dcK5SCPfY3CgwqOUVdr3dEm1oU+4QaBy31fuIJJ0Hx
NdbXBco8BZqJX9P67jwp9vbrFrSGBjPI0U4HNHVjrWlcBy8JT0aAnf0fyWFy3orA
T86EzmEw8drA1mXsHa5pmVwuHDx2X+D+eRurG9llCBrlIG9EDSmnalY4BeGqR4LS
oDrEH6M91I5+9iWoJ0rBheD8rPclXO2HpjXLApXzTjrORgEYZsM=
=MCdX
-----END PGP SIGNATURE-----
Merge tag 'docs-6.3' of git://git.lwn.net/linux
Pull documentation updates from Jonathan Corbet:
"It has been a moderately calm cycle for documentation; the significant
changes include:
- Some significant additions to the memory-management documentation
- Some improvements to navigation in the HTML-rendered docs
- More Spanish and Chinese translations
... and the usual set of typo fixes and such"
* tag 'docs-6.3' of git://git.lwn.net/linux: (68 commits)
Documentation/watchdog/hpwdt: Fix Format
Documentation/watchdog/hpwdt: Fix Reference
Documentation: core-api: padata: correct spelling
docs/mm: Physical Memory: correct spelling in reference to CONFIG_PAGE_EXTENSION
docs: Use HTML comments for the kernel-toc SPDX line
docs: Add more information to the HTML sidebar
Documentation: KVM: Update AMD memory encryption link
printk: Document that CONFIG_BOOT_PRINTK_DELAY required for boot_delay=
Documentation: userspace-api: correct spelling
Documentation: sparc: correct spelling
Documentation: driver-api: correct spelling
Documentation: admin-guide: correct spelling
docs: add workload-tracing document to admin-guide
docs/admin-guide/mm: remove useless markup
docs/mm: remove useless markup
docs/mm: Physical Memory: remove useless markup
docs/sp_SP: Add process magic-number translation
docs: ftrace: always use canonical ftrace path
Doc/damon: fix the data path error
dma-buf: Add "dma-buf" to title of documentation
...
The canonical location for the tracefs filesystem is at /sys/kernel/tracing.
But, from Documentation/trace/ftrace.rst:
Before 4.1, all ftrace tracing control files were within the debugfs
file system, which is typically located at /sys/kernel/debug/tracing.
For backward compatibility, when mounting the debugfs file system,
the tracefs file system will be automatically mounted at:
/sys/kernel/debug/tracing
Many parts of Documentation still reference this older debugfs path, so
let's update them to avoid confusion.
Signed-off-by: Ross Zwisler <zwisler@google.com>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Link: https://lore.kernel.org/r/20230125213251.2013791-1-zwisler@google.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Fix two mistakes in the PCM interface section:
1/ Members of the snd_pcm_hardware structure are channels_{min,max}
and not channel_{min,max} (mind the 's').
2/ Another sentence is incomplete as the reference to one structure
member (period_bytes_max) is missing.
There is no relevant 'Fixes:' tag to apply as both typos predate the
Git era.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20230130162924.119389-1-miquel.raynal@bootlin.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Some documents that listed on subsystem-apis have 'Linux' or 'The Linux'
title prefixes. It's duplicated information, and makes finding the
document of interest with human eyes not easy. Remove the prefixes from
the titles.
Signed-off-by: SeongJae Park <sj@kernel.org>
Acked-by: Iwona Winiarska <iwona.winiarska@intel.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://lore.kernel.org/r/20230122184834.181977-1-sj@kernel.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Update the documentation to follow the recent change of the memory
allocation helpers. The macro snd_dma_continuous_data() is gone, and
the driver needs to set up the coherent dma mask for allocating in the
lower memory addresses, instead.
Link: https://lore.kernel.org/r/20220823115740.14123-6-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Make sure all AC97 interface lines are spelled in capitals,
to avoid confusing readers about where the 5th line is.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Mark Brown <broonie@kernel.org>
Cc: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20220628165840.152235-1-marex@denx.de
Signed-off-by: Mark Brown <broonie@kernel.org>
The alsa-project documentation is now part of the kernel docs,
the original links are long dead, update links.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Mark Brown <broonie@kernel.org>
Cc: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20220628165807.152191-1-marex@denx.de
Signed-off-by: Mark Brown <broonie@kernel.org>
For making easier to test, add the new quirk_flags bits 17 and 18 to
enable and disable the generic implicit feedback mode. The bit 17 is
equivalent with implicit_fb=1 option, applying the generic implicit
feedback sync mode. OTOH, the bit 18 disables the implicit fb mode
forcibly.
Link: https://lore.kernel.org/r/20220421064101.12456-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This fixes the near-silence of the headphone jack on the ALC256-based
Samsung Galaxy Book Flex Alpha (NP730QCJ). The magic verbs were found
through trial and error, using known ALC298 hacks as inspiration. The
fixup is auto-enabled only when the NP730QCJ is detected. It can be
manually enabled using model=alc256-samsung-headphone.
Signed-off-by: Matt Kramer <mccleetus@gmail.com>
Link: https://lore.kernel.org/r/3168355.aeNJFYEL58@linus
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Adds a new "alc285-hp-amp-init" model that can be used to apply the ALC285
HP speaker amplifier initialization fixup to devices that are not already
known by passing "hda_model=alc285-hp-amp-init" to the
snd-sof-intel-hda-common module or "model=alc285-hp-amp-init" to the
snd-hda-intel module, depending on which is being used.
Signed-off-by: Bradley Scott <bscott@teksavvy.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20211213162246.506838-1-bscott@teksavvy.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
As the codec API has evolved the documentation has not kept up and still
uses old fields that have been removed. Update the examples to
represent the current API.
Signed-off-by: John Keeping <john@metanate.com>
Link: https://lore.kernel.org/r/20211024151731.360638-1-john@metanate.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Currently, The fixed 512KB prealloc buffer size is too larger for
tiny memory kernel (such as 16MB memory). This patch adds the module
option "prealloc_buffer_size_kbytes" to specify prealloc buffer size.
It's suitable for cards which use the generic dmaengine pcm driver
with no config.
Signed-off-by: Sugar Zhang <sugar.zhang@rock-chips.com>
Link: https://lore.kernel.org/r/1632394246-59341-1-git-send-email-sugar.zhang@rock-chips.com
Signed-off-by: Mark Brown <broonie@kernel.org>
- A reworking of PDF generation to yield better results for documents
using CJK fonts in particular.
- A new set of translations into traditional Chinese, a dialect for which
I am assured there is a community of interested readers.
- A lot more regular Chinese translation work as well.
...plus the usual assortment of updates, fixes, typo tweaks, etc.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEIw+MvkEiF49krdp9F0NaE2wMflgFAmEugrgACgkQF0NaE2wM
fliWWQf/RXf34QkMIe+r77WlTRKc+/6R/cO9VlYPtM9vqreKHZZvGgM1t76aOusb
M5QHwQGoZDzaE1wrv0PPm00HtB0Tw7GfZRUbZ4D+niJD1+gcbDTkTR6NdjOvWWUR
zHX2Sx8KJiNrFDtLtRtlUexM8GD124KZ0A8GF6Hpu3WR3HTFDInTdiylUOmj/4eO
3zUGgrJnUVzkqHLGZzV/kmE4kEHGpxyps2JwGq2iF7362t8R6xH3mEdKKKc1pUpx
lGSxfHs+OPWRsNxVJsdYh8kneIpML8OK6lKda1pzwNj8QhIMz/6tZoutKziHsalI
HkbC3exh+SHak2U6Had303vqkIM7cg==
=2QUy
-----END PGP SIGNATURE-----
Merge tag 'docs-5.15' of git://git.lwn.net/linux
Pull documentation updates from Jonathan Corbet:
"Yet another set of documentation changes:
- A reworking of PDF generation to yield better results for documents
using CJK fonts in particular.
- A new set of translations into traditional Chinese, a dialect for
which I am assured there is a community of interested readers.
- A lot more regular Chinese translation work as well.
... plus the usual assortment of updates, fixes, typo tweaks, etc"
* tag 'docs-5.15' of git://git.lwn.net/linux: (55 commits)
docs: sphinx-requirements: Move sphinx_rtd_theme to top
docs: pdfdocs: Enable language-specific font choice of zh_TW translations
docs: pdfdocs: Teach xeCJK about character classes of quotation marks
docs: pdfdocs: Permit AutoFakeSlant for CJK fonts
docs: pdfdocs: One-half spacing for CJK translations
docs: pdfdocs: Add conf.py local to translations for ascii-art alignment
docs: pdfdocs: Preserve inter-phrase space in Korean translations
docs: pdfdocs: Choose Serif font as CJK mainfont if possible
docs: pdfdocs: Add CJK-language-specific font settings
docs: pdfdocs: Refactor config for CJK document
scripts/kernel-doc: Override -Werror from KCFLAGS with KDOC_WERROR
docs/zh_CN: Add zh_CN/accounting/psi.rst
doc: align Italian translation
Documentation/features/vm: riscv supports THP now
docs/zh_CN: add infiniband user_verbs translation
docs/zh_CN: add infiniband user_mad translation
docs/zh_CN: add infiniband tag_matching translation
docs/zh_CN: add infiniband sysfs translation
docs/zh_CN: add infiniband opa_vnic translation
docs/zh_CN: add infiniband ipoib translation
...
The recent quirk for WALKMAN (commit 7af5a14371: "ALSA: usb-audio:
Fix regression on Sony WALKMAN NW-A45 DAC") may be required for other
devices and is worth to be put into the common quirk flags.
This patch adds a new quirk flag bit QUIRK_FLAG_SET_IFACE_FIRST and a
quirk table entry for the device.
Link: https://lore.kernel.org/r/20210824055720.9240-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Fix a trivial warning for the indentation by putting an empty line:
Documentation/sound/alsa-configuration.rst:2258: WARNING: Unexpected indentation.
Fixes: a39978ed6d ("ALSA: doc: Add the description of quirk_flags option for snd-usb-audio")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Link: https://lore.kernel.org/r/20210823113518.30134-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The previous patch allowed user to specify the aliasing of SSID via
model option for applying a quirk. Update the documentation
accordingly.
Link: https://lore.kernel.org/r/20210823073722.14873-4-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The conversion tools used during DocBook/LaTeX/html/Markdown->ReST
conversion and some cut-and-pasted text contain some characters that
aren't easily reachable on standard keyboards and/or could cause
troubles when parsed by the documentation build system.
Replace the occurences of the following characters:
- U+00a0 (' '): NO-BREAK SPACE
as it can cause lines being truncated on PDF output
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/21abe5fa495a05ac1f998ed66184a77e19ac89cc.1626947264.git.mchehab+huawei@kernel.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
This release sees a nice new feature in the core from Morimoto-san,
support for automatic negotiation of DAI formats between the components
on the link. Otherwise the big highlight was the merging of the Tegra
machine drivers into a single driver avoiding a bunch of duplication.
- Support for automatic negotiation of DAI formats.
- Accessory detection support for several Qualcomm parts.
- Support for IEC958 control with hdmi-codec.
- Merging of Tegra machine drivers into a single driver.
- Support for AmLogic SM1 TOACODEC, Intel AlderLake-M, several NXP
i.MX8 variants, NXP TFA1 and TDF9897, Rockchip RK817, Qualcomm
Quinary MI2S, Texas Instruments TAS2505
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmDZzCgACgkQJNaLcl1U
h9DmKAf+IhmeYLxMuSe7uC/BZHQN1PFFHDb9rNyznqYD0kCzgfqvt7RIbbpOB83g
Rw6+SnKWq1k2LOtJc7nVfFXfCrWTCH/GkqH22YoDWUjc2ZLTLE4V/dZhrYzggkjz
qE4bOUNBHUyqO0Xir1iMFCdr9V4+Fc5iYT83FccHB+hF+o8GNcU0MkovUKgiTeuz
EChmQlfsOHxKU6DbRUQrO30plSTaCQZ9CHAOXlGRQnGaYH/99ecav2O7sM1F4SrI
uHR544UuJUiZ26PcZ5M66GvuwAOoSw/v6Tr/OykBulgFUX8wafDcHq7vGK5A6WCE
qGwWpe12E+veMsJjn7wzifryaxJ9zQ==
=F1Zu
-----END PGP SIGNATURE-----
Merge tag 'asoc-v5.14' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Updates for v5.14
This release sees a nice new feature in the core from Morimoto-san,
support for automatic negotiation of DAI formats between the components
on the link. Otherwise the big highlight was the merging of the Tegra
machine drivers into a single driver avoiding a bunch of duplication.
- Support for automatic negotiation of DAI formats.
- Accessory detection support for several Qualcomm parts.
- Support for IEC958 control with hdmi-codec.
- Merging of Tegra machine drivers into a single driver.
- Support for AmLogic SM1 TOACODEC, Intel AlderLake-M, several NXP
i.MX8 variants, NXP TFA1 and TDF9897, Rockchip RK817, Qualcomm
Quinary MI2S, Texas Instruments TAS2505
