By design, SCMI performance domains define the granularity of
performance controls, they do not describe any underlying hardware
dependencies (although they may match in many cases).
It is therefore possible to have some platforms where hardware may have
the ability to control CPU performance at different granularity and choose
to describe fine-grained performance control through SCMI.
In such situations, the energy model would be provided with inaccurate
information based on controls, while it still needs to know the
performance boundaries.
To restore correct functionality, retrieve information of CPUs under the
same performance domain from operating-points-v2 in DT, and pass it on to
EM.
Link: https://lore.kernel.org/r/20210218222326.15788-3-nicola.mazzucato@arm.com
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Nicola Mazzucato <nicola.mazzucato@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
The current implementation of the scmi_cpufreq_init() function returns
-EPROBE_DEFER when the OPP table is not populated. In practice the
cpufreq core cannot handle this error code.
Therefore, fix the return value and clarify the error message.
Link: https://lore.kernel.org/r/20210218222326.15788-2-nicola.mazzucato@arm.com
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Nicola Mazzucato <nicola.mazzucato@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Add "arm,vexpress" to cpufreq-dt-platdev blacklist since the actual
scaling is handled by the firmware cpufreq drivers(scpi, scmi and
vexpress-spc).
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
In case of error, the function ioremap() returns NULL pointer
not ERR_PTR(). The IS_ERR() test in the return value check
should be replaced with NULL test.
Fixes: 67fc209b52 ("cpufreq: qcom-hw: drop devm_xxx() calls from init/exit hooks")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Drop support for depercated platforms using SFI, drop the entire
support for SFI that has been long deprecated too and make some
janitorial changes on top of that (Andy Shevchenko).
-----BEGIN PGP SIGNATURE-----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=jlPz
-----END PGP SIGNATURE-----
Merge tag 'sfi-removal-5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull Simple Firmware Interface (SFI) support removal from Rafael Wysocki:
"Drop support for depercated platforms using SFI, drop the entire
support for SFI that has been long deprecated too and make some
janitorial changes on top of that (Andy Shevchenko)"
* tag 'sfi-removal-5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
x86/platform/intel-mid: Update Copyright year and drop file names
x86/platform/intel-mid: Remove unused header inclusion in intel-mid.h
x86/platform/intel-mid: Drop unused __intel_mid_cpu_chip and Co.
x86/platform/intel-mid: Get rid of intel_scu_ipc_legacy.h
x86/PCI: Describe @reg for type1_access_ok()
x86/PCI: Get rid of custom x86 model comparison
sfi: Remove framework for deprecated firmware
cpufreq: sfi-cpufreq: Remove driver for deprecated firmware
media: atomisp: Remove unused header
mfd: intel_msic: Remove driver for deprecated platform
x86/apb_timer: Remove driver for deprecated platform
x86/platform/intel-mid: Remove unused leftovers (vRTC)
x86/platform/intel-mid: Remove unused leftovers (msic)
x86/platform/intel-mid: Remove unused leftovers (msic_thermal)
x86/platform/intel-mid: Remove unused leftovers (msic_power_btn)
x86/platform/intel-mid: Remove unused leftovers (msic_gpio)
x86/platform/intel-mid: Remove unused leftovers (msic_battery)
x86/platform/intel-mid: Remove unused leftovers (msic_ocd)
x86/platform/intel-mid: Remove unused leftovers (msic_audio)
platform/x86: intel_scu_wdt: Drop mistakenly added const
* pm-cpufreq:
cpufreq: Fix typo in kerneldoc comment
cpufreq: schedutil: Remove update_lock comment from struct sugov_policy definition
cpufreq: schedutil: Remove needless sg_policy parameter from ignore_dl_rate_limit()
cpufreq: ACPI: Set cpuinfo.max_freq directly if max boost is known
cpufreq: qcom-hw: drop devm_xxx() calls from init/exit hooks
* pm-opp:
opp: Don't skip freq update for different frequency
Change 'Terget' to 'Target'.
Should be Target.
Signed-off-by: Yue Hu <huyue2@yulong.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
[ rjw: Subject edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Pull ARM cpufreq fix for 5.12 from Viresh Kumar:
"Single patch to fix issue with cpu hotplug and policy recreation for
qcom-cpufreq-hw driver."
* 'cpufreq/arm/linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm:
cpufreq: qcom-hw: drop devm_xxx() calls from init/exit hooks
Commit 3c55e94c0a ("cpufreq: ACPI: Extend frequency tables to cover
boost frequencies") attempted to address a performance issue involving
acpi-cpufreq, the schedutil governor and scale-invariance on x86 by
extending the frequency tables created by acpi-cpufreq to cover the
entire range of "turbo" (or "boost") frequencies, but that caused
frequencies reported via /proc/cpuinfo and the scaling_cur_freq
attribute in sysfs to change which may confuse users and monitoring
tools.
For this reason, revert the part of commit 3c55e94c0a adding the
extra entry to the frequency table and use the observation that
in principle cpuinfo.max_freq need not be equal to the maximum
frequency listed in the frequency table for the given policy.
Namely, modify cpufreq_frequency_table_cpuinfo() to allow cpufreq
drivers to set their own cpuinfo.max_freq above that frequency and
change acpi-cpufreq to set cpuinfo.max_freq to the maximum boost
frequency found via CPPC.
This should be sufficient to let all of the cpufreq subsystem know
the real maximum frequency of the CPU without changing frequency
reporting.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=211305
Fixes: 3c55e94c0a ("cpufreq: ACPI: Extend frequency tables to cover boost frequencies")
Reported-by: Matt McDonald <gardotd426@gmail.com>
Tested-by: Matt McDonald <gardotd426@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Giovanni Gherdovich <ggherdovich@suse.cz>
Tested-by: Michael Larabel <Michael@phoronix.com>
Cc: 5.11+ <stable@vger.kernel.org> # 5.11+
Commit f17b3e4432 ("cpufreq: qcom-hw: Use
devm_platform_ioremap_resource() to simplify code") introduces
a regression on platforms using the driver, by failing to initialise
a policy, when one is created post hotplug.
When all the CPUs of a policy are hoptplugged out, the call to .exit()
and later to devm_iounmap() does not release the memory region that was
requested during devm_platform_ioremap_resource(). Therefore,
a subsequent call to .init() will result in the following error, which
will prevent a new policy to be initialised:
[ 3395.915416] CPU4: shutdown
[ 3395.938185] psci: CPU4 killed (polled 0 ms)
[ 3399.071424] CPU5: shutdown
[ 3399.094316] psci: CPU5 killed (polled 0 ms)
[ 3402.139358] CPU6: shutdown
[ 3402.161705] psci: CPU6 killed (polled 0 ms)
[ 3404.742939] CPU7: shutdown
[ 3404.765592] psci: CPU7 killed (polled 0 ms)
[ 3411.492274] Detected VIPT I-cache on CPU4
[ 3411.492337] GICv3: CPU4: found redistributor 400 region 0:0x0000000017ae0000
[ 3411.492448] CPU4: Booted secondary processor 0x0000000400 [0x516f802d]
[ 3411.503654] qcom-cpufreq-hw 17d43000.cpufreq: can't request region for resource [mem 0x17d45800-0x17d46bff]
With that being said, the original code was tricky and skipping memory
region request intentionally to hide this issue. The true cause is that
those devm_xxx() device managed functions shouldn't be used for cpufreq
init/exit hooks, because &pdev->dev is alive across the hooks and will
not trigger auto resource free-up. Let's drop the use of device managed
functions and manually allocate/free resources, so that the issue can be
fixed properly.
Cc: v5.10+ <stable@vger.kernel.org> # v5.10+
Fixes: f17b3e4432 ("cpufreq: qcom-hw: Use devm_platform_ioremap_resource() to simplify code")
Suggested-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
SFI-based platforms are gone. So does this driver.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
* pm-opp: (37 commits)
PM / devfreq: Add required OPPs support to passive governor
PM / devfreq: Cache OPP table reference in devfreq
OPP: Add function to look up required OPP's for a given OPP
opp: Replace ENOTSUPP with EOPNOTSUPP
opp: Fix "foo * bar" should be "foo *bar"
opp: Don't ignore clk_get() errors other than -ENOENT
opp: Update bandwidth requirements based on scaling up/down
opp: Allow lazy-linking of required-opps
opp: Remove dev_pm_opp_set_bw()
devfreq: tegra30: Migrate to dev_pm_opp_set_opp()
drm: msm: Migrate to dev_pm_opp_set_opp()
cpufreq: qcom: Migrate to dev_pm_opp_set_opp()
opp: Implement dev_pm_opp_set_opp()
opp: Update parameters of _set_opp_custom()
opp: Allow _generic_set_opp_clk_only() to work for non-freq devices
opp: Allow _generic_set_opp_regulator() to work for non-freq devices
opp: Allow _set_opp() to work for non-freq devices
opp: Split _set_opp() out of dev_pm_opp_set_rate()
opp: Keep track of currently programmed OPP
opp: No need to check clk for errors
...
Pull ARM cpufreq changes for v5.12 from Viresh Kumar:
"- Removal of Tango driver as the platform got removed (Arnd Bergmann).
- Use resource managed APIs for tegra20 (Dmitry Osipenko).
- Generic cleanups for brcmstb (Christophe JAILLET).
- Enable boost support for qcom-hw (Shawn Guo)."
* 'cpufreq/arm/linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm:
cpufreq: remove tango driver
cpufreq: brcmstb-avs-cpufreq: Fix resource leaks in ->remove()
cpufreq: brcmstb-avs-cpufreq: Free resources in error path
cpufreq: qcom-hw: enable boost support
cpufreq: tegra20: Use resource-managed API
If the maximum performance level taken for computing the
arch_max_freq_ratio value used in the x86 scale-invariance code is
higher than the one corresponding to the cpuinfo.max_freq value
coming from the acpi_cpufreq driver, the scale-invariant utilization
falls below 100% even if the CPU runs at cpuinfo.max_freq or slightly
faster, which causes the schedutil governor to select a frequency
below cpuinfo.max_freq. That frequency corresponds to a frequency
table entry below the maximum performance level necessary to get to
the "boost" range of CPU frequencies which prevents "boost"
frequencies from being used in some workloads.
While this issue is related to scale-invariance, it may be amplified
by commit db865272d9 ("cpufreq: Avoid configuring old governors as
default with intel_pstate") from the 5.10 development cycle which
made it extremely easy to default to schedutil even if the preferred
driver is acpi_cpufreq as long as intel_pstate is built too, because
the mere presence of the latter effectively removes the ondemand
governor from the defaults. Distro kernels are likely to include
both intel_pstate and acpi_cpufreq on x86, so their users who cannot
use intel_pstate or choose to use acpi_cpufreq may easily be
affectecd by this issue.
If CPPC is available, it can be used to address this issue by
extending the frequency tables created by acpi_cpufreq to cover the
entire available frequency range (including "boost" frequencies) for
each CPU, but if CPPC is not there, acpi_cpufreq has no idea what
the maximum "boost" frequency is and the frequency tables created by
it cannot be extended in a meaningful way, so in that case make it
ask the arch scale-invariance code to to use the "nominal" performance
level for CPU utilization scaling in order to avoid the issue at hand.
Fixes: db865272d9 ("cpufreq: Avoid configuring old governors as default with intel_pstate")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Giovanni Gherdovich <ggherdovich@suse.cz>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
A severe performance regression on AMD EPYC processors when using
the schedutil scaling governor was discovered by Phoronix.com and
attributed to the following commits:
41ea667227 ("x86, sched: Calculate frequency invariance for AMD
systems")
976df7e573 ("x86, sched: Use midpoint of max_boost and max_P for
frequency invariance on AMD EPYC")
The source of the problem is that the maximum performance level taken
for computing the arch_max_freq_ratio value used in the x86 scale-
invariance code is higher than the one corresponding to the
cpuinfo.max_freq value coming from the acpi_cpufreq driver.
This effectively causes the scale-invariant utilization to fall below
100% even if the CPU runs at cpuinfo.max_freq or slightly faster, so
the schedutil governor selects a frequency below cpuinfo.max_freq
then. That frequency corresponds to a frequency table entry below
the maximum performance level necessary to get to the "boost" range
of CPU frequencies.
However, if the cpuinfo.max_freq value coming from acpi_cpufreq was
higher, the schedutil governor would select higher frequencies which
in turn would allow acpi_cpufreq to set more adequate performance
levels and to get to the "boost" range of CPU frequencies more often.
This issue affects any systems where acpi_cpufreq is used and the
"boost" (or "turbo") frequencies are enabled, not just AMD EPYC.
Moreover, commit db865272d9 ("cpufreq: Avoid configuring old
governors as default with intel_pstate") from the 5.10 development
cycle made it extremely easy to default to schedutil even if the
preferred driver is acpi_cpufreq as long as intel_pstate is built
too, because the mere presence of the latter effectively removes the
ondemand governor from the defaults. Distro kernels are likely to
include both intel_pstate and acpi_cpufreq on x86, so their users
who cannot use intel_pstate or choose to use acpi_cpufreq may
easily be affectecd by this issue.
To address this issue, extend the frequency table constructed by
acpi_cpufreq for each CPU to cover the entire range of available
frequencies (including the "boost" ones) if CPPC is available and
indicates that "boost" (or "turbo") frequencies are enabled. That
causes cpuinfo.max_freq to become the maximum "boost" frequency of
the given CPU (instead of the maximum frequency returned by the ACPI
_PSS object that corresponds to the "nominal" performance level).
Fixes: 41ea667227 ("x86, sched: Calculate frequency invariance for AMD systems")
Fixes: 976df7e573 ("x86, sched: Use midpoint of max_boost and max_P for frequency invariance on AMD EPYC")
Fixes: db865272d9 ("cpufreq: Avoid configuring old governors as default with intel_pstate")
Link: https://www.phoronix.com/scan.php?page=article&item=linux511-amd-schedutil&num=1
Link: https://lore.kernel.org/linux-pm/20210203135321.12253-2-ggherdovich@suse.cz/
Reported-by: Michael Larabel <Michael@phoronix.com>
Diagnosed-by: Giovanni Gherdovich <ggherdovich@suse.cz>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Giovanni Gherdovich <ggherdovich@suse.cz>
Reviewed-by: Giovanni Gherdovich <ggherdovich@suse.cz>
Tested-by: Michael Larabel <Michael@phoronix.com>
This flag is set by one of the drivers but it isn't used in the code
otherwise. Remove the unused flag and update the driver.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
During cpufreq driver's registration, if the ->init() callback for all
the CPUs fail then there is not much point in keeping the driver around
as it will only account for more of unnecessary noise, for example
cpufreq core will try to suspend/resume the driver which never got
registered properly.
The removal of such a driver is avoided if the driver carries the
CPUFREQ_STICKY flag. This was added way back [1] in 2004 and perhaps no
one should ever need it now. A lot of drivers do set this flag, probably
because they just copied it from other drivers.
This was added earlier for some platforms [2] because their cpufreq
drivers were getting registered before the CPUs were registered with
subsys framework. And hence they used to fail.
The same isn't true anymore though. The current code flow in the kernel
is:
start_kernel()
-> kernel_init()
-> kernel_init_freeable()
-> do_basic_setup()
-> driver_init()
-> cpu_dev_init()
-> subsys_system_register() //For CPUs
-> do_initcalls()
-> cpufreq_register_driver()
Clearly, the CPUs will always get registered with subsys framework
before any cpufreq driver can get probed. Remove the flag and update the
relevant drivers.
Link: https://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.git/commit/include/linux/cpufreq.h?id=7cc9f0d9a1ab04cedc60d64fd8dcf7df224a3b4d # [1]
Link: https://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.git/commit/arch/arm/mach-sa1100/cpu-sa1100.c?id=f59d3bbe35f6268d729f51be82af8325d62f20f5 # [2]
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
dev_pm_opp_set_bw() is getting removed and dev_pm_opp_set_opp() should
be used instead. Migrate to the new API.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Tested-by: Dmitry Osipenko <digetx@gmail.com>
In the comment for trace in passive mode there is an
unnecessary "the". Eradicate it.
Signed-off-by: Nigel Christian <nigel.l.christian@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The tango platform is getting removed, so the driver is no
longer needed.
Cc: Marc Gonzalez <marc.w.gonzalez@free.fr>
Cc: Mans Rullgard <mans@mansr.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
[ Viresh: Update cpufreq-dt-platdev.c as well ]
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
If 'cpufreq_unregister_driver()' fails, just WARN and continue, so that
other resources are freed.
Fixes: de322e0859 ("cpufreq: brcmstb-avs-cpufreq: AVS CPUfreq driver for Broadcom STB SoCs")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
[ Viresh: Updated Subject ]
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
If 'cpufreq_register_driver()' fails, we must release the resources
allocated in 'brcm_avs_prepare_init()' as already done in the remove
function.
To do that, introduce a new function 'brcm_avs_prepare_uninit()' in order
to avoid code duplication. This also makes the code more readable (IMHO).
Fixes: de322e0859 ("cpufreq: brcmstb-avs-cpufreq: AVS CPUfreq driver for Broadcom STB SoCs")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
[ Viresh: Updated Subject ]
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
At least on sdm850, the 2956800 khz is detected as a boost frequency in
function qcom_cpufreq_hw_read_lut(). Let's enable boost support by
calling cpufreq_enable_boost_support(), so that we can get the boost
frequency by switching it on via 'boost' sysfs entry like below.
$ echo 1 > /sys/devices/system/cpu/cpufreq/boost
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Tested-by: Steev Klimaszewski <steev@kali.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Switch cpufreq-tegra20 driver to use resource-managed API.
This removes the need to get opp_table pointer using
dev_pm_opp_get_opp_table() in order to release OPP table that
was requested by dev_pm_opp_set_supported_hw(), making the code
a bit more straightforward.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Currently, when turbo is disabled (either by BIOS or by the user),
the intel_pstate driver reads the max non-turbo frequency from the
package-wide MSR_PLATFORM_INFO(0xce) register.
However, on asymmetric platforms it is possible in theory that small
and big core with HWP enabled might have different max non-turbo CPU
frequency, because MSR_HWP_CAPABILITIES is per-CPU scope according
to Intel Software Developer Manual.
The turbo max freq is already per-CPU in current code, so make
similar change to the max non-turbo frequency as well.
Reported-by: Wendy Wang <wendy.wang@intel.com>
Signed-off-by: Chen Yu <yu.c.chen@intel.com>
[ rjw: Subject and changelog edits ]
Cc: 4.18+ <stable@vger.kernel.org> # 4.18+: a45ee4d4e1: cpufreq: intel_pstate: Change intel_pstate_get_hwp_max() argument
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Rename intel_cpufreq_adjust_hwp() and intel_cpufreq_adjust_perf_ctl()
to intel_cpufreq_hwp_update() and intel_cpufreq_perf_ctl_update(),
respectively, to avoid possible confusion with the ->adjist_perf()
callback function, intel_cpufreq_adjust_perf().
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Chen Yu <yu.c.chen@intel.com>
All of the callers of intel_pstate_get_hwp_max() access the struct
cpudata object that corresponds to the given CPU already and the
function itself needs to access that object (in order to update
hwp_cap_cached), so modify the code to pass a struct cpudata pointer
to it instead of the CPU number.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Chen Yu <yu.c.chen@intel.com>
Because intel_pstate_get_hwp_max() which updates hwp_cap_cached
may run in parallel with the readers of it, annotate all of the
read accesses to it with READ_ONCE().
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Chen Yu <yu.c.chen@intel.com>
percent_fp() was used in intel_pstate_pid_reset(), which was removed in
commit 9d0ef7af1f ("cpufreq: intel_pstate: Do not use PID-based P-state
selection") and hence, percent_fp() is unused since then.
percent_ext_fp() was last used in intel_pstate_update_perf_limits(), which
was refactored in commit 1a4fe38add ("cpufreq: intel_pstate: Remove
max/min fractions to limit performance"), and hence, percent_ext_fp() is
unused since then.
make CC=clang W=1 points us those unused functions:
drivers/cpufreq/intel_pstate.c:79:23: warning: unused function 'percent_fp' [-Wunused-function]
static inline int32_t percent_fp(int percent)
^
drivers/cpufreq/intel_pstate.c:94:23: warning: unused function 'percent_ext_fp' [-Wunused-function]
static inline int32_t percent_ext_fp(int percent)
^
Remove those obsolete functions.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Currently there is an unlikely case where cpufreq_cpu_get() returns a
NULL policy and this will cause a NULL pointer dereference later on.
Fix this by passing the policy to transition_frequency_fidvid() from
the caller and hence eliminating the need for the cpufreq_cpu_get()
and cpufreq_cpu_put().
Thanks to Viresh Kumar for suggesting the fix.
Addresses-Coverity: ("Dereference null return")
Fixes: b43a7ffbf3 ("cpufreq: Notify all policy->cpus in cpufreq_notify_transition()")
Suggested-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
If turbo P-states cannot be used, either due to the configuration of
the processor, or because intel_pstate is not allowed to used them,
the maximum available P-state with HWP enabled corresponds to the
HWP_CAP.GUARANTEED value which is not static. It can be adjusted by
an out-of-band agent or during an Intel Speed Select performance
level change, so long as it remains less than or equal to
HWP_CAP.MAX.
However, if turbo P-states cannot be used, intel_cpufreq_adjust_perf()
always uses pstate.max_pstate (set during the initialization of the
driver only) as the maximum available P-state, so it may miss a change
of the HWP_CAP.GUARANTEED value.
Prevent that from happening by modifyig intel_cpufreq_adjust_perf()
to always read the "guaranteed" and "maximum turbo" performance
levels from the cached HWP_CAP value.
Fixes: a365ab6b9d ("cpufreq: intel_pstate: Implement the ->adjust_perf() callback")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
When sugov_update_single_perf() falls back to the "frequency"
path due to the missing scale-invariance, it will call
cpufreq_driver_fast_switch() via sugov_fast_switch()
and the driver's ->fast_switch() callback will be invoked,
so it must not be NULL.
However, after commit a365ab6b9d ("cpufreq: intel_pstate: Implement
the ->adjust_perf() callback") intel_pstate sets ->fast_switch() to
NULL when it is going to use intel_cpufreq_adjust_perf(), which is a
mistake, because on x86 the scale-invariance may be turned off
dynamically, so modify it to retain the original ->adjust_perf()
callback pointer.
Fixes: a365ab6b9d ("cpufreq: intel_pstate: Implement the ->adjust_perf() callback")
Reported-by: Kenneth R. Crudup <kenny@panix.com>
Tested-by: Kenneth R. Crudup <kenny@panix.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
* pm-cpufreq:
cpufreq: intel_pstate: Use most recent guaranteed performance values
cpufreq: intel_pstate: Implement the ->adjust_perf() callback
cpufreq: Add special-purpose fast-switching callback for drivers
cpufreq: schedutil: Add util to struct sg_cpu
cppc_cpufreq: replace per-cpu data array with a list
cppc_cpufreq: expose information on frequency domains
cppc_cpufreq: clarify support for coordination types
cppc_cpufreq: use policy->cpu as driver of frequency setting
ACPI: processor: fix NONE coordination for domain mapping failure
ACPI: processor: Drop duplicate setting of shared_cpu_map
When turbo has been disabled by the BIOS, but HWP_CAP.GUARANTEED is
changed later, user space may want to take advantage of this increased
guaranteed performance.
HWP_CAP.GUARANTEED is not a static value. It can be adjusted by an
out-of-band agent or during an Intel Speed Select performance level
change. The HWP_CAP.MAX is still the maximum achievable performance
with turbo disabled by the BIOS, so HWP_CAP.GUARANTEED can still
change as long as it remains less than or equal to HWP_CAP.MAX.
When HWP_CAP.GUARANTEED is changed, the sysfs base_frequency
attribute shows the most recent guaranteed frequency value. This
attribute can be used by user space software to update the scaling
min/max limits of the CPU.
Currently, the ->setpolicy() callback already uses the latest
HWP_CAP values when setting HWP_REQ, but the ->verify() callback will
restrict the user settings to the to old guaranteed performance value
which prevents user space from making use of the extra CPU capacity
theoretically available to it after increasing HWP_CAP.GUARANTEED.
To address this, read HWP_CAP in intel_pstate_verify_cpu_policy()
to obtain the maximum P-state that can be used and use that to
confine the policy max limit instead of using the cached and
possibly stale pstate.max_freq value for this purpose.
For consistency, update intel_pstate_update_perf_limits() to use the
maximum available P-state returned by intel_pstate_get_hwp_max() to
compute the maximum frequency instead of using the return value of
intel_pstate_get_max_freq() which, again, may be stale.
This issue is a side-effect of fixing the scaling frequency limits in
commit eacc9c5a92 ("cpufreq: intel_pstate: Fix intel_pstate_get_hwp_max()
for turbo disabled") which corrected the setting of the reduced scaling
frequency values, but caused stale HWP_CAP.GUARANTEED to be used in
the case at hand.
Fixes: eacc9c5a92 ("cpufreq: intel_pstate: Fix intel_pstate_get_hwp_max() for turbo disabled")
Reported-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Tested-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: 5.8+ <stable@vger.kernel.org> # 5.8+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Make intel_pstate expose the ->adjust_perf() callback when it
operates in the passive mode with HWP enabled which causes the
schedutil governor to use that callback instead of ->fast_switch().
The minimum and target performance-level values passed by the
governor to ->adjust_perf() are converted to HWP.REQ.MIN and
HWP.REQ.DESIRED, respectively, which allows the processor to
adjust its configuration to maximize energy-efficiency while
providing sufficient capacity.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
First off, some cpufreq drivers (eg. intel_pstate) can pass hints
beyond the current target frequency to the hardware and there are no
provisions for doing that in the cpufreq framework. In particular,
today the driver has to assume that it should not allow the frequency
to fall below the one requested by the governor (or the required
capacity may not be provided) which may not be the case and which may
lead to excessive energy usage in some scenarios.
Second, the hints passed by these drivers to the hardware need not be
in terms of the frequency, so representing the utilization numbers
coming from the scheduler as frequency before passing them to those
drivers is not really useful.
Address the two points above by adding a special-purpose replacement
for the ->fast_switch callback, called ->adjust_perf, allowing the
governor to pass abstract performance level (rather than frequency)
values for the minimum (required) and target (desired) performance
along with the CPU capacity to compare them to.
Also update the schedutil governor to use the new callback instead
of ->fast_switch if present and if the utilization mertics are
frequency-invariant (that is requisite for the direct mapping
between the utilization and the CPU performance levels to be a
reasonable approximation).
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
The cppc_cpudata per-cpu storage was inefficient (1) additional to causing
functional issues (2) when CPUs are hotplugged out, due to per-cpu data
being improperly initialised.
(1) The amount of information needed for CPPC performance control in its
cpufreq driver depends on the domain (PSD) coordination type:
ANY: One set of CPPC control and capability data (e.g desired
performance, highest/lowest performance, etc) applies to all
CPUs in the domain.
ALL: Same as ANY. To be noted that this type is not currently
supported. When supported, information about which CPUs
belong to a domain is needed in order for frequency change
requests to be sent to each of them.
HW: It's necessary to store CPPC control and capability
information for all the CPUs. HW will then coordinate the
performance state based on their limitations and requests.
NONE: Same as HW. No HW coordination is expected.
Despite this, the previous initialisation code would indiscriminately
allocate memory for all CPUs (all_cpu_data) and unnecessarily
duplicate performance capabilities and the domain sharing mask and type
for each possible CPU.
(2) With the current per-cpu structure, when having ANY coordination,
the cppc_cpudata cpu information is not initialised (will remain 0)
for all CPUs in a policy, other than policy->cpu. When policy->cpu is
hotplugged out, the driver will incorrectly use the uninitialised (0)
value of the other CPUs when making frequency changes. Additionally,
the previous values stored in the perf_ctrls.desired_perf will be
lost when policy->cpu changes.
Therefore replace the array of per cpu data with a list. The memory for
each structure is allocated at policy init, where a single structure
can be allocated per policy, not per cpu. In order to accommodate the
struct list_head node in the cppc_cpudata structure, the now unused cpu
and cur_policy variables are removed.
For example, on a arm64 Juno platform with 6 CPUs: (0, 1, 2, 3) in PSD1,
(4, 5) in PSD2 - ANY coordination, the memory allocation comparison shows:
Before patch:
- ANY coordination:
total slack req alloc/free caller
0 0 0 0/1 _kernel_size_le_hi32+0x0xffff800008ff7810
0 0 0 0/6 _kernel_size_le_hi32+0x0xffff800008ff7808
128 80 48 1/0 _kernel_size_le_hi32+0x0xffff800008ffc070
768 0 768 6/0 _kernel_size_le_hi32+0x0xffff800008ffc0e4
After patch:
- ANY coordination:
total slack req alloc/free caller
256 0 256 2/0 _kernel_size_le_hi32+0x0xffff800008fed410
0 0 0 0/2 _kernel_size_le_hi32+0x0xffff800008fed274
Additional notes:
- A pointer to the policy's cppc_cpudata is stored in policy->driver_data
- Driver registration is skipped if _CPC entries are not present.
Signed-off-by: Ionela Voinescu <ionela.voinescu@arm.com>
Tested-by: Mian Yousaf Kaukab <ykaukab@suse.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Use the existing sysfs attribute "freqdomain_cpus" to expose
information to userspace about CPUs in the same frequency domain.
Signed-off-by: Ionela Voinescu <ionela.voinescu@arm.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Tested-by: Mian Yousaf Kaukab <ykaukab@suse.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The previous coordination type handling in the cppc_cpufreq init code
created some confusion: the comment mentioned "Support only SW_ANY for
now" while only the SW_ALL/ALL case resulted in a failure. The other
coordination types (HW_ALL/HW, NONE) were silently supported.
Clarify support for coordination types while describing in comments the
intended behavior.
Signed-off-by: Ionela Voinescu <ionela.voinescu@arm.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Tested-by: Mian Yousaf Kaukab <ykaukab@suse.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Considering only the currently supported coordination types (ANY, HW,
NONE), this change only makes a difference for the ANY type, when
policy->cpu is hotplugged out. In that case the new policy->cpu will
be different from ((struct cppc_cpudata *)policy->driver_data)->cpu.
While in this case the controls of *ANY* CPU could be used to drive
frequency changes, it's more consistent to use policy->cpu as the
leading CPU, as used in all other cppc_cpufreq functions. Additionally,
the debug prints in cppc_set_perf() would no longer create confusion
when referring to a CPU that is hotplugged out.
Signed-off-by: Ionela Voinescu <ionela.voinescu@arm.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Tested-by: Mian Yousaf Kaukab <ykaukab@suse.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Pull OPP (Operating Performance Points) updates for 5.11-rc1 from
Viresh Kumar:
"This contains the following updates:
- Allow empty (node-less) OPP tables in DT for passing just the
dependency related information (Nicola Mazzucato).
- Fix a potential lockdep in OPP core and other OPP core cleanups
(Viresh Kumar).
- Don't abuse dev_pm_opp_get_opp_table() to create an OPP table, fix
cpufreq-dt driver for the same (Viresh Kumar).
- dev_pm_opp_put_regulators() accepts a NULL argument now, updates to
all the users as well (Viresh Kumar)."
* 'opp/linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm:
opp: of: Allow empty opp-table with opp-shared
dt-bindings: opp: Allow empty OPP tables
media: venus: dev_pm_opp_put_*() accepts NULL argument
drm/panfrost: dev_pm_opp_put_*() accepts NULL argument
drm/lima: dev_pm_opp_put_*() accepts NULL argument
PM / devfreq: exynos: dev_pm_opp_put_*() accepts NULL argument
cpufreq: qcom-cpufreq-nvmem: dev_pm_opp_put_*() accepts NULL argument
cpufreq: dt: dev_pm_opp_put_regulators() accepts NULL argument
opp: Allow dev_pm_opp_put_*() APIs to accept NULL opp_table
opp: Don't create an OPP table from dev_pm_opp_get_opp_table()
cpufreq: dt: Don't (ab)use dev_pm_opp_get_opp_table() to create OPP table
opp: Reduce the size of critical section in _opp_kref_release()
opp: Don't return opp_dev from _find_opp_dev()
opp: Allocate the OPP table outside of opp_table_lock
opp: Always add entries in dev_list with opp_table->lock held
Make cpufreq_online() return negative error codes on all errors that
cause the policy to be destroyed, as appropriate.
Signed-off-by: Wang ShaoBo <bobo.shaobowang@huawei.com>
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Fix up the remaining kerneldoc comments that don't adhere to the
expected format and clarify some of them a bit.
No functional changes.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
local_clock() has better precision and accuracy as compared to jiffies,
lets use it for time management in cpufreq stats.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Avoid doing the same assignment in both branches of a conditional,
do it after the whole conditional instead.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The dev_pm_opp_put_*() APIs now accepts a NULL opp_table pointer and so
there is no need for us to carry the extra checks. Drop them.
Reviewed-by: Ilia Lin <ilia.lin@kernel.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
The dev_pm_opp_put_*() APIs now accepts a NULL opp_table pointer and so
there is no need for us to carry the extra checks. Drop them.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Initially, the helper dev_pm_opp_get_opp_table() was supposed to be used
only for the OPP core's internal use (it tries to find an existing OPP
table and if it doesn't find one, then it allocates the OPP table).
Sometime back, the cpufreq-dt driver started using it to make sure all
the relevant resources required by the OPP core are available earlier
during initialization process to properly propagate -EPROBE_DEFER.
It worked but it also abused the API to create an OPP table, which
should be created with the help of other helpers provided by the OPP
core.
The OPP core will be updated in a later commit to limit the scope of
dev_pm_opp_get_opp_table() to only finding an existing OPP table and not
create one. This commit updates the cpufreq-dt driver before that
happens.
Now the cpufreq-dt driver creates the OPP and cpufreq tables for all the
CPUs from driver's init callback itself.
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Add mechanism to discover the power scale present in the performance
protocol for all domains. Provide this information to Energy Model,
which then can be checked in other frameworks, e.g. thermal.
Suggested-by: Morten Rasmussen <morten.rasmussen@arm.com>
Signed-off-by: Lukasz Luba <lukasz.luba@arm.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
The function tegra194_get_speed_common() uses hardware timers to
calculate the current CPUFREQ and so rename this function to be
tegra194_calculate_speed() to reflect what it does.
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
The Tegra194 CPUFREQ driver sets the CPUFREQ_NEED_INITIAL_FREQ_CHECK
flag which means that the CPUFREQ framework will call the 'get' callback
on boot to determine the current frequency of the CPUs. Therefore, it is
not necessary for the Tegra194 CPUFREQ driver to internally call the
tegra194_get_speed_common() during initialisation to query the current
frequency as well. Fix this by removing the call to the
tegra194_get_speed_common() during initialisation and simplify the code.
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
The CPUFREQ driver framework references each individual CPUs when
getting and setting the speed. Tegra186 has 3 clusters of A57 CPUs and
1 cluster of Denver CPUs. Hence, the Tegra186 CPUFREQ driver need to
know which cluster a given CPU belongs to. The logic in the Tegra186
driver can be greatly simplified by storing the cluster ID associated
with each CPU in the tegra186_cpufreq_cpu structure. This allow us to
completely remove the Tegra cluster info structure from the driver and
simplifiy the code.
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Sparse warns that the incorrect type is being assigned to the CPUFREQ
driver_data variable in the Tegra186 CPUFREQ driver. The Tegra186
CPUFREQ driver is assigned a type of 'void __iomem *' to a pointer of
type 'void *' ...
drivers/cpufreq/tegra186-cpufreq.c:72:37: sparse: sparse: incorrect
type in assignment (different address spaces) @@
expected void *driver_data @@ got void [noderef] __iomem * @@
...
drivers/cpufreq/tegra186-cpufreq.c:87:40: sparse: sparse: incorrect
type in initializer (different address spaces) @@
expected void [noderef] __iomem *edvd_reg @@ got void *driver_data @@
The Tegra186 CPUFREQ driver is using the policy->driver_data variable to
store and iomem pointer to a Tegra186 CPU register that is used to set
the clock speed for the CPU. This is not necessary because the register
base address is already stored in the driver data and the offset of the
register for each CPU is static. Therefore, fix this by adding a new
structure with the register offsets for each CPU and store this in the
main driver data structure along with the register base address. Please
note that a new structure has been added for storing the register
offsets rather than a simple array, because this will permit further
clean-ups and simplification of the driver.
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
A driver should not 'select' drivers from another subsystem.
If NVMEM is disabled, this one results in a warning:
WARNING: unmet direct dependencies detected for NVMEM_IMX_OCOTP
Depends on [n]: NVMEM [=n] && (ARCH_MXC [=y] || COMPILE_TEST [=y]) && HAS_IOMEM [=y]
Selected by [y]:
- ARM_IMX6Q_CPUFREQ [=y] && CPU_FREQ [=y] && (ARM || ARM64 [=y]) && ARCH_MXC [=y] && REGULATOR_ANATOP [=y]
Change the 'select' to 'depends on' to prevent it from going wrong,
and allow compile-testing without that driver, since it is only
a runtime dependency.
Fixes: 2782ef34ed ("cpufreq: imx: Select NVMEM_IMX_OCOTP")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
This patch adds missing MODULE_ALIAS for automatic loading of this cpufreq
driver when it is compiled as an external module.
Signed-off-by: Pali Rohár <pali@kernel.org>
Fixes: 47ac9aa165 ("cpufreq: arm_big_little: add vexpress SPC interface driver")
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
This patch adds missing MODULE_ALIAS for automatic loading of this cpufreq
driver when it is compiled as an external module.
Signed-off-by: Pali Rohár <pali@kernel.org>
Fixes: 8def31034d ("cpufreq: arm_big_little: add SCPI interface driver")
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
This patch adds missing MODULE_ALIAS for automatic loading of this cpufreq
driver when it is compiled as an external module.
Signed-off-by: Pali Rohár <pali@kernel.org>
Fixes: a0a22cf144 ("cpufreq: Loongson1: Add cpufreq driver for Loongson1B")
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
This patch adds missing MODULE_DEVICE_TABLE definition which generates
correct modalias for automatic loading of this cpufreq driver when it is
compiled as an external module.
Signed-off-by: Pali Rohár <pali@kernel.org>
Fixes: f328584f7b ("cpufreq: Add sun50i nvmem based CPU scaling driver")
Reviewed-by: Yangtao Li <tiny.windzz@gmail.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
This patch adds missing MODULE_DEVICE_TABLE definition which generates
correct modalias for automatic loading of this cpufreq driver when it is
compiled as an external module.
Signed-off-by: Pali Rohár <pali@kernel.org>
Fixes: ab0ea257fc ("cpufreq: st: Provide runtime initialised driver for ST's platforms")
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
This patch adds missing MODULE_DEVICE_TABLE definition which generates
correct modalias for automatic loading of this cpufreq driver when it is
compiled as an external module.
Signed-off-by: Pali Rohár <pali@kernel.org>
Fixes: 46e2856b8e ("cpufreq: Add Kryo CPU scaling driver")
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
This patch adds missing MODULE_DEVICE_TABLE definition which generates
correct modalias for automatic loading of this cpufreq driver when it is
compiled as an external module.
Signed-off-by: Pali Rohár <pali@kernel.org>
Fixes: 501c574f4e ("cpufreq: mediatek: Add support of cpufreq to MT2701/MT7623 SoC")
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
This patch adds missing MODULE_DEVICE_TABLE definition which generates
correct modalias for automatic loading of this cpufreq driver when it is
compiled as an external module.
Signed-off-by: Pali Rohár <pali@kernel.org>
Fixes: 6754f55610 ("cpufreq / highbank: add support for highbank cpufreq")
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
This patch adds missing MODULE_DEVICE_TABLE definition which generates
correct modalias for automatic loading of this cpufreq driver when it is
compiled as an external module.
Signed-off-by: Pali Rohár <pali@kernel.org>
Fixes: f525a67053 ("cpufreq: ap806: add cpufreq driver for Armada 8K")
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Add the missing platform_driver_unregister() before return from
mtk_cpufreq_driver_init in the error handling case when failed
to register mtk-cpufreq platform device
Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Frequency returned by 'cpuinfo_cur_freq' using counters is not fixed
and keeps changing slightly. This change returns a consistent value
from freq_table. If the reconstructed frequency has acceptable delta
from the last written value, then return the frequency corresponding
to the last written ndiv value from freq_table. Otherwise, print a
warning and return the reconstructed freq.
Signed-off-by: Sumit Gupta <sumitg@nvidia.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Add MT8516 to cpufreq-dt-platdev blacklist since the actual scaling is
handled by the 'mediatek-cpufreq' driver.
Signed-off-by: Fabien Parent <fparent@baylibre.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Use dev_pm_opp_put_prop_name() to avoid mem leak, which free opp_table.
Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
Signed-off-by: Yangtao Li <frank@allwinnertech.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Pull SCMI cpufreq driver fix for 5.10-rc6 from Viresh Kumar:
"This fixes a build issues with SCMI cpufreq driver in the
!CONFIG_COMMON_CLK case."
* 'cpufreq/arm/fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm:
cpufreq: scmi: Fix build for !CONFIG_COMMON_CLK
Commit 8410e7f3b3 ("cpufreq: scmi: Fix OPP addition failure with a
dummy clock provider") registers a dummy clock provider using
devm_of_clk_add_hw_provider. These *_hw_provider functions are defined
only when CONFIG_COMMON_CLK=y. One possible fix is to add the Kconfig
dependency, but since we plan to move away from the clock dependency
for scmi cpufreq, it is preferrable to avoid that.
Let us just conditionally compile out the offending call to
devm_of_clk_add_hw_provider. It also uses the variable 'dev' outside
of the #ifdef block to avoid build warning.
Fixes: 8410e7f3b3 ("cpufreq: scmi: Fix OPP addition failure with a dummy clock provider")
Cc: Rafael J. Wysocki <rjw@rjwysocki.net>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
The CPPC performance capabilities are used significantly throughout
the driver.
Simplify the use of them by introducing a local pointer "caps" to
point to cpu_data->perf_caps, in functions that access performance
capabilities often.
Signed-off-by: Ionela Voinescu <ionela.voinescu@arm.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
In order to maintain the typical naming convention in the cpufreq
framework:
- replace the use of "cpu" variable name for cppc_cpudata pointers
with "cpu_data"
- replace variable names "cpu_num" and "cpunum" with "cpu"
- make cpu variables unsigned int
Where pertinent, also move the initialisation of cpu_data variable to
its declaration and make consistent use of the local "cpu" variable.
Signed-off-by: Ionela Voinescu <ionela.voinescu@arm.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Fix a few trivial issues in the cppc_cpufreq driver:
- indentation of function arguments
- consistent use of tabs (vs space) in defines
- spelling: s/Offest/Offset, s/trasition/transition
- order of local variables, from long pointers to structures to
short ret and i (index) variables, to improve readability
Signed-off-by: Ionela Voinescu <ionela.voinescu@arm.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Pull cpufreq-arm fixes for 5.10-rc5 from Viresh Kumar:
"- tegra186: Fix ->get() callback.
- arm/scmi: Add dummy clock provider to fix failure."
* 'cpufreq/arm/fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm:
cpufreq: scmi: Fix OPP addition failure with a dummy clock provider
cpufreq: tegra186: Fix get frequency callback
Commit dd461cd918 ("opp: Allow dev_pm_opp_get_opp_table() to return
-EPROBE_DEFER") handles -EPROBE_DEFER for the clock/interconnects within
_allocate_opp_table() which is called from dev_pm_opp_add and it
now propagates the error back to the caller.
SCMI performance domain re-used clock bindings to keep it simple. However
with the above mentioned change, if clock property is present in a device
node, opps fails to get added with below errors until clk_get succeeds.
cpu0: failed to add opp 450000000Hz
cpu0: failed to add opps to the device
....(errors on cpu1-cpu4)
cpu5: failed to add opp 450000000Hz
cpu5: failed to add opps to the device
So, in order to fix the issue, we need to register dummy clock provider.
With the dummy clock provider, clk_get returns NULL(no errors!), then opp
core proceeds to add OPPs for the CPUs.
Cc: Rafael J. Wysocki <rjw@rjwysocki.net>
Fixes: dd461cd918 ("opp: Allow dev_pm_opp_get_opp_table() to return -EPROBE_DEFER")
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Commit b89c01c960 ("cpufreq: tegra186: Fix initial frequency")
implemented the CPUFREQ 'get' callback to determine the current
operating frequency for each CPU. This implementation used a simple
looked up to determine the current operating frequency. The problem
with this is that frequency table for different Tegra186 devices may
vary and so the default boot frequency for Tegra186 device may or may
not be present in the frequency table. If the default boot frequency is
not present in the frequency table, this causes the function
tegra186_cpufreq_get() to return 0 and in turn causes cpufreq_online()
to fail which prevents CPUFREQ from working.
Fix this by always calculating the CPU frequency based upon the current
'ndiv' setting for the CPU. Note that the CPU frequency for Tegra186 is
calculated by reading the current 'ndiv' setting, multiplying by the
CPU reference clock and dividing by a constant divisor.
Fixes: b89c01c960 ("cpufreq: tegra186: Fix initial frequency")
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
There are different platforms and devices which might use different scale
for the power values. Kernel sub-systems might need to check if all
Energy Model (EM) devices are using the same scale. Address that issue and
store the information inside EM for each device. Thanks to that they can
be easily compared and proper action triggered.
Suggested-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: Quentin Perret <qperret@google.com>
Signed-off-by: Lukasz Luba <lukasz.luba@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Make intel_pstate take the new CPUFREQ_GOV_STRICT_TARGET governor
flag into account when it operates in the passive mode with HWP
enabled, so as to fix the "powersave" governor behavior in that
case (currently, HWP is allowed to scale the performance all the
way up to the policy max limit when the "powersave" governor is
used, but it should be constrained to the policy min limit then).
Fixes: f6ebbcf08f ("cpufreq: intel_pstate: Implement passive mode with HWP enabled")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Cc: 5.9+ <stable@vger.kernel.org> # 5.9+: 9a2a9ebc0a cpufreq: Introduce governor flags
Cc: 5.9+ <stable@vger.kernel.org> # 5.9+: 218f668701 cpufreq: Introduce CPUFREQ_GOV_STRICT_TARGET
Cc: 5.9+ <stable@vger.kernel.org> # 5.9+: ea9364bbad cpufreq: Add strict_target to struct cpufreq_policy
Add a new field to be set when the CPUFREQ_GOV_STRICT_TARGET flag is
set for the current governor to struct cpufreq_policy, so that the
drivers needing to check CPUFREQ_GOV_STRICT_TARGET do not have to
access the governor object during every frequency transition.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Introduce a new governor flag, CPUFREQ_GOV_STRICT_TARGET, for the
governors that want the target frequency to be set exactly to the
given value without leaving any room for adjustments on the hardware
side and set this flag for the powersave and performance governors.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
A new cpufreq governor flag will be added subsequently, so replace
the bool dynamic_switching fleid in struct cpufreq_governor with a
flags field and introduce CPUFREQ_GOV_DYNAMIC_SWITCHING to set for
the "dynamic switching" governors instead of it.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
The restore_freq field in struct cpufreq_policy is only used by
__target_index() in one place and a local variable in that function
may as well be used instead of it, so drop it and modify
__target_index() accordingly.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Add a helper function to test the flags of the cpufreq driver in use
againt a given flags mask.
In particular, this will be needed to test the
CPUFREQ_NEED_UPDATE_LIMITS cpufreq driver flag in the schedutil
governor.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
A semicolon is not needed after a switch statement.
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
If the cpufreq policy max limit is changed when intel_pstate operates
in the passive mode with HWP enabled and the "powersave" governor is
used on top of it, the HWP max limit is not updated as appropriate.
Namely, in the "powersave" governor case, the target P-state
is always equal to the policy min limit, so if the latter does
not change, intel_cpufreq_adjust_hwp() is not invoked to update
the HWP Request MSR due to the "target_pstate != old_pstate" check
in intel_cpufreq_update_pstate(), so the HWP max limit is not
updated as a result.
Also, if the CPUFREQ_NEED_UPDATE_LIMITS flag is not set for the
driver and the target frequency does not change along with the
policy max limit, the "target_freq == policy->cur" check in
__cpufreq_driver_target() prevents the driver's ->target() callback
from being invoked at all, so the HWP max limit is not updated.
To prevent that occurring, set the CPUFREQ_NEED_UPDATE_LIMITS flag
in the intel_cpufreq driver structure if HWP is enabled and modify
intel_cpufreq_update_pstate() to do the "target_pstate != old_pstate"
check only in the non-HWP case and let intel_cpufreq_adjust_hwp()
always run in the HWP case (it will update HWP Request only if the
cached value of the register is different from the new one including
the limits, so if neither the target P-state value nor the max limit
changes, the register write will still be avoided).
Fixes: f6ebbcf08f ("cpufreq: intel_pstate: Implement passive mode with HWP enabled")
Reported-by: Zhang Rui <rui.zhang@intel.com>
Cc: 5.9+ <stable@vger.kernel.org> # 5.9+: 1c534352f4 cpufreq: Introduce CPUFREQ_NEED_UPDATE_LIMITS ...
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Tested-by: Zhang Rui <rui.zhang@intel.com>
Generally, a cpufreq driver may need to update some internal upper
and lower frequency boundaries on policy max and min changes,
respectively, but currently this does not work if the target
frequency does not change along with the policy limit.
Namely, if the target frequency does not change along with the
policy min or max, the "target_freq == policy->cur" check in
__cpufreq_driver_target() prevents driver callbacks from being
invoked and they do not even have a chance to update the
corresponding internal boundary.
This particularly affects the "powersave" and "performance"
governors that always set the target frequency to one of the
policy limits and it never changes when the other limit is updated.
To allow cpufreq the drivers needing to update internal frequency
boundaries on policy limits changes to avoid this issue, introduce
a new driver flag, CPUFREQ_NEED_UPDATE_LIMITS, that (when set) will
neutralize the check mentioned above.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Commit 33aa46f252 ("cpufreq: intel_pstate: Use passive mode by
default without HWP") was meant to cause intel_pstate to be used
in the passive mode with the schedutil governor on top of it, but
it missed the case in which either "ondemand" or "conservative"
was selected as the default governor in the existing kernel config,
in which case the previous old governor configuration would be used,
causing the default legacy governor to be used on top of intel_pstate
instead of schedutil.
Address this by preventing "ondemand" and "conservative" from being
configured as the default cpufreq governor in the case when schedutil
is the default choice for the default governor setting.
[Note that the default cpufreq governor can still be set via the
kernel command line if need be and that choice is not limited,
so if anyone really wants to use one of the legacy governors by
default, it can be achieved this way.]
Fixes: 33aa46f252 ("cpufreq: intel_pstate: Use passive mode by default without HWP")
Reported-by: Julia Lawall <julia.lawall@inria.fr>
Cc: 5.8+ <stable@vger.kernel.org> # 5.8+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
A 'break' following a 'return' statement is pointless, so remove it.
Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Various driver updates for platforms. A bulk of this is smaller fixes or
cleanups, but some of the new material this time around is:
- Support for Nvidia Tegra234 SoC
- Ring accelerator support for TI AM65x
- PRUSS driver for TI platforms
- Renesas support for R-Car V3U SoC
- Reset support for Cortex-M4 processor on i.MX8MQ
There are also new socinfo entries for a handful of different SoCs
and platforms.
-----BEGIN PGP SIGNATURE-----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=tfPb
-----END PGP SIGNATURE-----
Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC-related driver updates from Olof Johansson:
"Various driver updates for platforms. A bulk of this is smaller fixes
or cleanups, but some of the new material this time around is:
- Support for Nvidia Tegra234 SoC
- Ring accelerator support for TI AM65x
- PRUSS driver for TI platforms
- Renesas support for R-Car V3U SoC
- Reset support for Cortex-M4 processor on i.MX8MQ
There are also new socinfo entries for a handful of different SoCs and
platforms"
* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (131 commits)
drm/mediatek: reduce clear event
soc: mediatek: cmdq: add clear option in cmdq_pkt_wfe api
soc: mediatek: cmdq: add jump function
soc: mediatek: cmdq: add write_s_mask value function
soc: mediatek: cmdq: add write_s value function
soc: mediatek: cmdq: add read_s function
soc: mediatek: cmdq: add write_s_mask function
soc: mediatek: cmdq: add write_s function
soc: mediatek: cmdq: add address shift in jump
soc: mediatek: mtk-infracfg: Fix kerneldoc
soc: amlogic: pm-domains: use always-on flag
reset: sti: reset-syscfg: fix struct description warnings
reset: imx7: add the cm4 reset for i.MX8MQ
dt-bindings: reset: imx8mq: add m4 reset
reset: Fix and extend kerneldoc
reset: reset-zynqmp: Added support for Versal platform
dt-bindings: reset: Updated binding for Versal reset driver
reset: imx7: Support module build
soc: fsl: qe: Remove unnessesary check in ucc_set_tdm_rxtx_clk
soc: fsl: qman: convert to use be32_add_cpu()
...
SoC changes, a substantial part of this is cleanup of some of the older
platforms that used to have a bunch of board files. In particular:
- Removal of non-DT i.MX platforms that haven't seen activity in years,
it's time to remove them.
- A bunch of cleanup and removal of platform data for TI/OMAP platforms,
moving over to genpd for power/reset control (yay!)
- Major cleanup of Samsung S3C24xx and S3C64xx platforms, moving them
closer to multiplatform support (not quite there yet, but getting
close).
THere are a few other changes too, smaller fixlets, etc. For new
platform support, the primary ones re:
- New SoC: Hisilicon SD5203, ARM926EJ-S platform.
- Cpufreq support for i.MX7ULP
-----BEGIN PGP SIGNATURE-----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=0+Ee
-----END PGP SIGNATURE-----
Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC platform updates from Olof Johansson:
"SoC changes, a substantial part of this is cleanup of some of the
older platforms that used to have a bunch of board files.
In particular:
- Remove non-DT i.MX platforms that haven't seen activity in years,
it's time to remove them.
- A bunch of cleanup and removal of platform data for TI/OMAP
platforms, moving over to genpd for power/reset control (yay!)
- Major cleanup of Samsung S3C24xx and S3C64xx platforms, moving them
closer to multiplatform support (not quite there yet, but getting
close).
There are a few other changes too, smaller fixlets, etc. For new
platform support, the primary ones are:
- New SoC: Hisilicon SD5203, ARM926EJ-S platform.
- Cpufreq support for i.MX7ULP"
* tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (121 commits)
ARM: mstar: Select MStar intc
ARM: stm32: Replace HTTP links with HTTPS ones
ARM: debug: add UART early console support for SD5203
ARM: hisi: add support for SD5203 SoC
ARM: omap3: enable off mode automatically
clk: imx: imx35: Remove mx35_clocks_init()
clk: imx: imx31: Remove mx31_clocks_init()
clk: imx: imx27: Remove mx27_clocks_init()
ARM: imx: Remove unused definitions
ARM: imx35: Retrieve the IIM base address from devicetree
ARM: imx3: Retrieve the AVIC base address from devicetree
ARM: imx3: Retrieve the CCM base address from devicetree
ARM: imx31: Retrieve the IIM base address from devicetree
ARM: imx27: Retrieve the CCM base address from devicetree
ARM: imx27: Retrieve the SYSCTRL base address from devicetree
ARM: s3c64xx: bring back notes from removed debug-macro.S
ARM: s3c24xx: fix Wunused-variable warning on !MMU
ARM: samsung: fix PM debug build with DEBUG_LL but !MMU
MAINTAINERS: mark linux-samsung-soc list non-moderated
ARM: imx: Remove remnant board file support pieces
...
- Move the AVS drivers to new platform-specific locations and get
rid of the drivers/power/avs directory (Ulf Hansson).
- Add on/off notifiers and idle state accounting support to the
generic power domains (genpd) framework (Ulf Hansson, Lina Iyer).
- Ulf will maintain the PM domain part of cpuidle-psci (Ulf Hansson).
- Make intel_idle disregard ACPI _CST if it cannot use the data
returned by that method (Mel Gorman).
- Modify intel_pstate to avoid leaving useless sysfs directory
structure behind if it cannot be registered (Chen Yu).
- Fix domain detection in the RAPL power capping driver and prevent
it from failing to enumerate the Psys RAPL domain (Zhang Rui).
- Allow acpi-cpufreq to use ACPI _PSD information with Family 19 and
later AMD chips (Wei Huang).
- Update the driver assumptions comment in intel_idle and fix a
kerneldoc comment in the runtime PM framework (Alexander Monakov,
Bean Huo).
- Avoid unnecessary resets of the cached frequency in the schedutil
cpufreq governor to reduce overhead (Wei Wang).
- Clean up the cpufreq core a bit (Viresh Kumar).
- Make assorted minor janitorial changes (Daniel Lezcano, Geert
Uytterhoeven, Hubert Jasudowicz, Tom Rix).
- Clean up and optimize the cpupower utility somewhat (Colin Ian
King, Martin Kaistra).
-----BEGIN PGP SIGNATURE-----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=TFKg
-----END PGP SIGNATURE-----
Merge tag 'pm-5.10-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more power management updates from Rafael Wysocki:
"First of all, the adaptive voltage scaling (AVS) drivers go to new
platform-specific locations as planned (this part was reported to have
merge conflicts against the new arm-soc updates in linux-next).
In addition to that, there are some fixes (intel_idle, intel_pstate,
RAPL, acpi_cpufreq), the addition of on/off notifiers and idle state
accounting support to the generic power domains (genpd) code and some
janitorial changes all over.
Specifics:
- Move the AVS drivers to new platform-specific locations and get rid
of the drivers/power/avs directory (Ulf Hansson).
- Add on/off notifiers and idle state accounting support to the
generic power domains (genpd) framework (Ulf Hansson, Lina Iyer).
- Ulf will maintain the PM domain part of cpuidle-psci (Ulf Hansson).
- Make intel_idle disregard ACPI _CST if it cannot use the data
returned by that method (Mel Gorman).
- Modify intel_pstate to avoid leaving useless sysfs directory
structure behind if it cannot be registered (Chen Yu).
- Fix domain detection in the RAPL power capping driver and prevent
it from failing to enumerate the Psys RAPL domain (Zhang Rui).
- Allow acpi-cpufreq to use ACPI _PSD information with Family 19 and
later AMD chips (Wei Huang).
- Update the driver assumptions comment in intel_idle and fix a
kerneldoc comment in the runtime PM framework (Alexander Monakov,
Bean Huo).
- Avoid unnecessary resets of the cached frequency in the schedutil
cpufreq governor to reduce overhead (Wei Wang).
- Clean up the cpufreq core a bit (Viresh Kumar).
- Make assorted minor janitorial changes (Daniel Lezcano, Geert
Uytterhoeven, Hubert Jasudowicz, Tom Rix).
- Clean up and optimize the cpupower utility somewhat (Colin Ian
King, Martin Kaistra)"
* tag 'pm-5.10-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (23 commits)
PM: sleep: remove unreachable break
PM: AVS: Drop the avs directory and the corresponding Kconfig
PM: AVS: qcom-cpr: Move the driver to the qcom specific drivers
PM: runtime: Fix typo in pm_runtime_set_active() helper comment
PM: domains: Fix build error for genpd notifiers
powercap: Fix typo in Kconfig "Plance" -> "Plane"
cpufreq: schedutil: restore cached freq when next_f is not changed
acpi-cpufreq: Honor _PSD table setting on new AMD CPUs
PM: AVS: smartreflex Move driver to soc specific drivers
PM: AVS: rockchip-io: Move the driver to the rockchip specific drivers
PM: domains: enable domain idle state accounting
PM: domains: Add curly braces to delimit comment + statement block
PM: domains: Add support for PM domain on/off notifiers for genpd
powercap/intel_rapl: enumerate Psys RAPL domain together with package RAPL domain
powercap/intel_rapl: Fix domain detection
intel_idle: Ignore _CST if control cannot be taken from the platform
cpuidle: Remove pointless stub
intel_idle: mention assumption that WBINVD is not needed
MAINTAINERS: Add section for cpuidle-psci PM domain
cpufreq: intel_pstate: Delete intel_pstate sysfs if failed to register the driver
...
acpi-cpufreq has a old quirk that overrides the _PSD table supplied by
BIOS on AMD CPUs. However the _PSD table of new AMD CPUs (Family 19h+)
now accurately reports the P-state dependency of CPU cores. Hence this
quirk needs to be fixed in order to support new CPUs' frequency control.
Fixes: acd3162482 ("acpi-cpufreq: Add quirk to disable _PSD usage on all AMD CPUs")
Signed-off-by: Wei Huang <wei.huang2@amd.com>
[ rjw: Subject edit ]
Cc: 3.10+ <stable@vger.kernel.org> # 3.10+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
- A series from Nick adding ARCH_WANT_IRQS_OFF_ACTIVATE_MM & selecting it for
powerpc, as well as a related fix for sparc.
- Remove support for PowerPC 601.
- Some fixes for watchpoints & addition of a new ptrace flag for detecting ISA
v3.1 (Power10) watchpoint features.
- A fix for kernels using 4K pages and the hash MMU on bare metal Power9
systems with > 16TB of RAM, or RAM on the 2nd node.
- A basic idle driver for shallow stop states on Power10.
- Tweaks to our sched domains code to better inform the scheduler about the
hardware topology on Power9/10, where two SMT4 cores can be presented by
firmware as an SMT8 core.
- A series doing further reworks & cleanups of our EEH code.
- Addition of a filter for RTAS (firmware) calls done via sys_rtas(), to
prevent root from overwriting kernel memory.
- Other smaller features, fixes & cleanups.
Thanks to:
Alexey Kardashevskiy, Andrew Donnellan, Aneesh Kumar K.V, Athira Rajeev, Biwen
Li, Cameron Berkenpas, Cédric Le Goater, Christophe Leroy, Christoph Hellwig,
Colin Ian King, Daniel Axtens, David Dai, Finn Thain, Frederic Barrat, Gautham
R. Shenoy, Greg Kurz, Gustavo Romero, Ira Weiny, Jason Yan, Joel Stanley,
Jordan Niethe, Kajol Jain, Konrad Rzeszutek Wilk, Laurent Dufour, Leonardo
Bras, Liu Shixin, Luca Ceresoli, Madhavan Srinivasan, Mahesh Salgaonkar,
Nathan Lynch, Nicholas Mc Guire, Nicholas Piggin, Nick Desaulniers, Oliver
O'Halloran, Pedro Miraglia Franco de Carvalho, Pratik Rajesh Sampat, Qian Cai,
Qinglang Miao, Ravi Bangoria, Russell Currey, Satheesh Rajendran, Scott
Cheloha, Segher Boessenkool, Srikar Dronamraju, Stan Johnson, Stephen Kitt,
Stephen Rothwell, Thiago Jung Bauermann, Tyrel Datwyler, Vaibhav Jain,
Vaidyanathan Srinivasan, Vasant Hegde, Wang Wensheng, Wolfram Sang, Yang
Yingliang, zhengbin.
-----BEGIN PGP SIGNATURE-----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=akeX
-----END PGP SIGNATURE-----
Merge tag 'powerpc-5.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
- A series from Nick adding ARCH_WANT_IRQS_OFF_ACTIVATE_MM & selecting
it for powerpc, as well as a related fix for sparc.
- Remove support for PowerPC 601.
- Some fixes for watchpoints & addition of a new ptrace flag for
detecting ISA v3.1 (Power10) watchpoint features.
- A fix for kernels using 4K pages and the hash MMU on bare metal
Power9 systems with > 16TB of RAM, or RAM on the 2nd node.
- A basic idle driver for shallow stop states on Power10.
- Tweaks to our sched domains code to better inform the scheduler about
the hardware topology on Power9/10, where two SMT4 cores can be
presented by firmware as an SMT8 core.
- A series doing further reworks & cleanups of our EEH code.
- Addition of a filter for RTAS (firmware) calls done via sys_rtas(),
to prevent root from overwriting kernel memory.
- Other smaller features, fixes & cleanups.
Thanks to: Alexey Kardashevskiy, Andrew Donnellan, Aneesh Kumar K.V,
Athira Rajeev, Biwen Li, Cameron Berkenpas, Cédric Le Goater, Christophe
Leroy, Christoph Hellwig, Colin Ian King, Daniel Axtens, David Dai, Finn
Thain, Frederic Barrat, Gautham R. Shenoy, Greg Kurz, Gustavo Romero,
Ira Weiny, Jason Yan, Joel Stanley, Jordan Niethe, Kajol Jain, Konrad
Rzeszutek Wilk, Laurent Dufour, Leonardo Bras, Liu Shixin, Luca
Ceresoli, Madhavan Srinivasan, Mahesh Salgaonkar, Nathan Lynch, Nicholas
Mc Guire, Nicholas Piggin, Nick Desaulniers, Oliver O'Halloran, Pedro
Miraglia Franco de Carvalho, Pratik Rajesh Sampat, Qian Cai, Qinglang
Miao, Ravi Bangoria, Russell Currey, Satheesh Rajendran, Scott Cheloha,
Segher Boessenkool, Srikar Dronamraju, Stan Johnson, Stephen Kitt,
Stephen Rothwell, Thiago Jung Bauermann, Tyrel Datwyler, Vaibhav Jain,
Vaidyanathan Srinivasan, Vasant Hegde, Wang Wensheng, Wolfram Sang, Yang
Yingliang, zhengbin.
* tag 'powerpc-5.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (228 commits)
Revert "powerpc/pci: unmap legacy INTx interrupts when a PHB is removed"
selftests/powerpc: Fix eeh-basic.sh exit codes
cpufreq: powernv: Fix frame-size-overflow in powernv_cpufreq_reboot_notifier
powerpc/time: Make get_tb() common to PPC32 and PPC64
powerpc/time: Make get_tbl() common to PPC32 and PPC64
powerpc/time: Remove get_tbu()
powerpc/time: Avoid using get_tbl() and get_tbu() internally
powerpc/time: Make mftb() common to PPC32 and PPC64
powerpc/time: Rename mftbl() to mftb()
powerpc/32s: Remove #ifdef CONFIG_PPC_BOOK3S_32 in head_book3s_32.S
powerpc/32s: Rename head_32.S to head_book3s_32.S
powerpc/32s: Setup the early hash table at all time.
powerpc/time: Remove ifdef in get_dec() and set_dec()
powerpc: Remove get_tb_or_rtc()
powerpc: Remove __USE_RTC()
powerpc: Tidy up a bit after removal of PowerPC 601.
powerpc: Remove support for PowerPC 601
powerpc: Remove PowerPC 601
powerpc: Drop SYNC_601() ISYNC_601() and SYNC()
powerpc: Remove CONFIG_PPC601_SYNC_FIX
...
There is a corner case that if the intel_pstate driver fails to be
registered (might be due to invalid MSR access) and acpi_cpufreq
takse over, the intel_pstate sysfs interface is still populated
which may confuse user space (turbostat for example):
grep . /sys/devices/system/cpu/cpu0/cpufreq/scaling_driver
acpi-cpufreq
grep . /sys/devices/system/cpu/intel_pstate/*
/sys/devices/system/cpu/intel_pstate/max_perf_pct:0
/sys/devices/system/cpu/intel_pstate/min_perf_pct:0
grep: /sys/devices/system/cpu/intel_pstate/no_turbo: Resource temporarily unavailable
grep: /sys/devices/system/cpu/intel_pstate/num_pstates: Resource temporarily unavailable
/sys/devices/system/cpu/intel_pstate/status:off
grep: /sys/devices/system/cpu/intel_pstate/turbo_pct: Resource temporarily unavailable
The mere presence of the intel_pstate sysfs interface does not mean
that intel_pstate is in use (for example, echo "off" to "status"),
but it should not be created in the failing case.
Fix this issue by deleting the intel_pstate sysfs if the driver
registration fails.
Reported-by: Wendy Wang <wendy.wang@intel.com>
Suggested-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Chen Yu <yu.c.chen@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com
[ rjw: Refactor code to avoid jumps, change function name, changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The cpufreq core checks if the frequency programmed by the bootloaders
is not listed in the freq table and programs one from the table in such
a case. This is done only if the driver has set the
CPUFREQ_NEED_INITIAL_FREQ_CHECK flag.
Currently we print two separate messages, with almost the same content,
and do this with a pr_warn() which may be a bit too much as the driver
only asked us to check this as it expected this to be the case. Lower
down the severity of the print message by switching to pr_info() instead
and print a single message only.
Reported-by: Sumit Gupta <sumitg@nvidia.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Sumit Gupta <sumitg@nvidia.com>
Tested-by: Sumit Gupta <sumitg@nvidia.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Fix following warning:
drivers/cpufreq/cpufreq_stats.c:63:10: warning: %d in format string (no.
1) requires 'int' but the argument type is 'unsigned int'
Fixes: 40c3bd4cfa ("cpufreq: stats: Defer stats update to cpufreq_stats_record_transition()")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Compared to other arch_* functions, arch_set_freq_scale() has an atypical
weak definition that can be replaced by a strong architecture specific
implementation.
The more typical support for architectural functions involves defining
an empty stub in a header file if the symbol is not already defined in
architecture code. Some examples involve:
- #define arch_scale_freq_capacity topology_get_freq_scale
- #define arch_scale_freq_invariant topology_scale_freq_invariant
- #define arch_scale_cpu_capacity topology_get_cpu_scale
- #define arch_update_cpu_topology topology_update_cpu_topology
- #define arch_scale_thermal_pressure topology_get_thermal_pressure
- #define arch_set_thermal_pressure topology_set_thermal_pressure
Bring arch_set_freq_scale() in line with these functions by renaming it to
topology_set_freq_scale() in the arch topology driver, and by defining the
arch_set_freq_scale symbol to point to the new function for arm and arm64.
While there are other users of the arch_topology driver, this patch defines
arch_set_freq_scale for arm and arm64 only, due to their existing
definitions of arch_scale_freq_capacity. This is the getter function of the
frequency invariance scale factor and without a getter function, the
setter function - arch_set_freq_scale() has not purpose.
Signed-off-by: Ionela Voinescu <ionela.voinescu@arm.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Sudeep Holla <sudeep.holla@arm.com> (BL_SWITCHER and topology parts)
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The patch avoids allocating cpufreq_policy on stack hence fixing frame
size overflow in 'powernv_cpufreq_reboot_notifier':
drivers/cpufreq/powernv-cpufreq.c: In function powernv_cpufreq_reboot_notifier:
drivers/cpufreq/powernv-cpufreq.c:906:1: error: the frame size of 2064 bytes is larger than 2048 bytes
Fixes: cf30af76 ("cpufreq: powernv: Set the cpus to nominal frequency during reboot/kexec")
Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Reviewed-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200922080254.41497-1-srikar@linux.vnet.ibm.com
There is nothing to prevent the CPU or the compiler from reordering
the writes to stats->reset_time and stats->reset_pending in
store_reset(), in which case the readers of stats->reset_time may see
a stale value. Moreover, on 32-bit arches the write to reset_time
cannot be completed in one go, so the readers of it may see a
partially updated value in that case.
To prevent that from happening, add a write memory barrier between
the writes to stats->reset_time and stats->reset_pending in
store_reset() and corresponding read memory barrier in the
readers of stats->reset_time.
Fixes: 40c3bd4cfa ("cpufreq: stats: Defer stats update to cpufreq_stats_record_transition()")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Pull ARM cpufreq updates for 5.10-rc1 from Viresh Kumar:
"- STI cpufreq driver updates to allow new hardware (Alain Volmat).
- Minor tegra driver fixes around initial frequency mismatch warnings (Jon
Hunter).
- dev_err simplification for s5pv210 driver (Krzysztof Kozlowski).
- Qcom driver updates to allow new hardware and minor cleanup (Manivannan
Sadhasivam and Matthias Kaehlcke).
- Add missing MODULE_DEVICE_TABLE for armada driver (Pali Rohár).
- Improved defer-probe handling in cpufreq-dt driver (Stephan Gerhold).
- Call dev_pm_opp_of_remove_table() unconditionally for imx driver (Viresh
Kumar)."
* 'cpufreq/arm/linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm:
cpufreq: qcom: Don't add frequencies without an OPP
cpufreq: qcom-hw: Add cpufreq support for SM8250 SoC
cpufreq: qcom-hw: Use of_device_get_match_data for offsets and row size
cpufreq: qcom-hw: Use devm_platform_ioremap_resource() to simplify code
dt-bindings: cpufreq: cpufreq-qcom-hw: Document Qcom EPSS compatible
cpufreq: qcom-hw: Make use of cpufreq driver_data for passing pdev
cpufreq: armada-37xx: Add missing MODULE_DEVICE_TABLE
cpufreq: arm: Kconfig: add CPUFREQ_DT depend for STI CPUFREQ
cpufreq: dt-platdev: Blacklist st,stih418 SoC
cpufreq: sti-cpufreq: add stih418 support
cpufreq: s5pv210: Use dev_err instead of pr_err in probe
cpufreq: s5pv210: Simplify with dev_err_probe()
cpufreq: tegra186: Fix initial frequency
cpufreq: dt: Refactor initialization to handle probe deferral properly
opp: Handle multiple calls for same OPP table in _of_add_opp_table_v1()
cpufreq: imx6q: Unconditionally call dev_pm_opp_of_remove_table()
opp: Allow dev_pm_opp_get_opp_table() to return -EPROBE_DEFER
The cpufreq core handles the updates to policy->cur and recording of
cpufreq trace events for all the governors except schedutil's fast
switch case.
Move that as well to cpufreq core for consistency and readability.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Now that all the blockers are gone for enabling stats in fast-switching
case, enable it.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Since this will be part of the scheduler's hotpath in some cases, use
unlikely() for few of the obvious conditionals.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The locking isn't required anymore as stats can get updated only from
one place at a time. Remove it.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
In order to prepare for lock-less stats update, add support to defer any
updates to it until cpufreq_stats_record_transition() is called.
The stats were updated from two places earlier:
- show_time_in_state(): This can be easily deferred, all we need is to
calculate the delta duration again in this routine to show the current
state's time-in-state.
- store_reset(): This is a bit tricky as we need to clear the stats
here and avoid races with simultaneous call to
cpufreq_stats_record_transition().
Fix that by deferring the reset of the stats (within the code) to the
next call to cpufreq_stats_record_transition(), but since we need to
keep showing the right stats until that time, we capture the reset
time and account for the time since last time reset was called until
the time cpufreq_stats_record_transition() update the stats.
User space will continue seeing the stats correctly, everything will
be 0 after the stats are reset, apart from the time-in-state of the
current state, until the time a frequency switch happens.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
[ rjw: Minor changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Fix missing return statement when writing "off" to intel_pstate status
sysfs I/F.
Fixes: 55671ea325 ("cpufreq: intel_pstate: Free memory only when turning off")
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The passed cpumask arguments to arch_set_freq_scale() and
arch_freq_counters_available() are only iterated over, so reflect this
in the prototype. This also allows to pass system cpumasks like
cpu_online_mask without getting a warning.
Signed-off-by: Valentin Schneider <valentin.schneider@arm.com>
Signed-off-by: Ionela Voinescu <ionela.voinescu@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Now that the update of the FI scale factor is done in cpufreq core for
selected functions - target(), target_index() and fast_switch(),
we can provide feedback to the task scheduler and architecture code
on whether cpufreq supports FI.
For this purpose provide an external function to expose whether the
cpufreq drivers support FI, by using a static key.
The logic behind the enablement of cpufreq-based invariance is as
follows:
- cpufreq-based invariance is disabled by default
- cpufreq-based invariance is enabled if any of the callbacks
above is implemented while the unsupported setpolicy() is not
The cpufreq_supports_freq_invariance() function only returns whether
cpufreq is instrumented with the arch_set_freq_scale() calls that
result in support for frequency invariance. Due to the lack of knowledge
on whether the implementation of arch_set_freq_scale() actually results
in the setting of a scale factor based on cpufreq information, it is up
to the architecture code to ensure the setting and provision of the
scale factor to the scheduler.
Signed-off-by: Ionela Voinescu <ionela.voinescu@arm.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
To properly scale its per-entity load-tracking signals, the task scheduler
needs to be given a frequency scale factor, i.e. some image of the current
frequency the CPU is running at. Currently, this scale can be computed
either by using counters (APERF/MPERF on x86, AMU on arm64), or by
piggy-backing on the frequency selection done by cpufreq.
For the latter, drivers have to explicitly set the scale factor
themselves, despite it being purely boiler-plate code: the required
information depends entirely on the kind of frequency switch callback
implemented by the driver, i.e. either of: target_index(), target(),
fast_switch() and setpolicy().
The fitness of those callbacks with regard to driving the Frequency
Invariance Engine (FIE) is studied below:
target_index()
==============
Documentation states that the chosen frequency "must be determined by
freq_table[index].frequency". It isn't clear if it *has* to be that
frequency, or if it can use that frequency value to do some computation
that ultimately leads to a different frequency selection. All drivers
go for the former, while the vexpress-spc-cpufreq has an atypical
implementation which is handled separately.
Therefore, the hook works on the assumption the core can use
freq_table[index].frequency.
target()
=======
This has been flagged as deprecated since:
commit 9c0ebcf78f ("cpufreq: Implement light weight ->target_index() routine")
It also doesn't have that many users:
gx-suspmod.c:439: .target = cpufreq_gx_target,
s3c24xx-cpufreq.c:428: .target = s3c_cpufreq_target,
intel_pstate.c:2528: .target = intel_cpufreq_target,
cppc_cpufreq.c:401: .target = cppc_cpufreq_set_target,
cpufreq-nforce2.c:371: .target = nforce2_target,
sh-cpufreq.c:163: .target = sh_cpufreq_target,
pcc-cpufreq.c:573: .target = pcc_cpufreq_target,
Similarly to the path taken for target_index() calls in the cpufreq core
during a frequency change, all of the drivers above will mark the end of a
frequency change by a call to cpufreq_freq_transition_end().
Therefore, cpufreq_freq_transition_end() can be used as the location for
the arch_set_freq_scale() call to potentially inform the scheduler of the
frequency change.
This change maintains the previous functionality for the drivers that
implement the target_index() callback, while also adding support for the
few drivers that implement the deprecated target() callback.
fast_switch()
=============
This callback *has* to return the frequency that was selected.
setpolicy()
===========
This callback does not have any designated way of informing what was the
end choice. But there are only two drivers using setpolicy(), and none
of them have current FIE support:
drivers/cpufreq/longrun.c:281: .setpolicy = longrun_set_policy,
drivers/cpufreq/intel_pstate.c:2215: .setpolicy = intel_pstate_set_policy,
The intel_pstate is known to use counter-driven frequency invariance.
Conclusion
==========
Given that the significant majority of current FIE enabled drivers use
callbacks that lend themselves to triggering the setting of the FIE scale
factor in a generic way, move the invariance setter calls to cpufreq core.
As a result of setting the frequency scale factor in cpufreq core, after
callbacks that lend themselves to trigger it, remove this functionality
from the driver side.
To be noted that despite marking a successful frequency change, many
cpufreq drivers will consider the new frequency as the requested
frequency, although this is might not be the one granted by the hardware.
Therefore, the call to arch_set_freq_scale() is a "best effort" one, and
it is up to the architecture if the new frequency is used in the new
frequency scale factor setting (determined by the implementation of
arch_set_freq_scale()) or eventually used by the scheduler (determined
by the implementation of arch_scale_freq_capacity()). The architecture
is in a better position to decide if it has better methods to obtain
more accurate information regarding the current frequency and use that
information instead (for example, the use of counters).
Also, the implementation to arch_set_freq_scale() will now have to handle
error conditions (current frequency == 0) in order to prevent the
overhead in cpufreq core when the default arch_set_freq_scale()
implementation is used.
Signed-off-by: Ionela Voinescu <ionela.voinescu@arm.com>
Suggested-by: Valentin Schneider <valentin.schneider@arm.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The driver currently adds all frequencies from the hardware LUT to
the cpufreq table, regardless of whether the corresponding OPP
exists. This prevents devices from disabling certain OPPs through
the device tree and can result in CPU frequencies for which the
interconnect bandwidth can't be adjusted. Only add frequencies
with an OPP entry.
Fixes: 55538fbc79 ("cpufreq: qcom: Read voltage LUT and populate OPP")
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
SM8250 SoC uses EPSS block for carrying out the cpufreq duties. Hence, add
support for it in the driver with relevant dev data.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Amit Kucheria <amitk@kernel.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
For preparing the driver to handle further SoC revisions, let's use the
of_device_get_match_data() API for getting the device specific offsets
and row size instead of defining them globally.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
devm_platform_ioremap_resource() is the combination of
platform_get_resource() and devm_ioremap_resource(). Hence, use it to
simplify the code a bit.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Amit Kucheria <amitk@kernel.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Get rid of global_pdev pointer and make use of cpufreq driver_data for
passing the reference of pdev. This aligns with what other cpufreq drivers
are doing.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
CONFIG_ARM_ARMADA_37XX_CPUFREQ is tristate option and therefore this
cpufreq driver can be compiled as a module. This patch adds missing
MODULE_DEVICE_TABLE which generates correct modalias for automatic
loading of this cpufreq driver when is compiled as an external module.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Pali Rohár <pali@kernel.org>
Fixes: 92ce45fb87 ("cpufreq: Add DVFS support for Armada 37xx")
[ Viresh: Added __maybe_unused ]
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
The sti cpufreq driver is relying on the CPUFREQ_DT driver
hence add the depends within the Kconfig.arm
Signed-off-by: Alain Volmat <avolmat@me.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Add st,stih418 SoC in the blacklist since the cpufreq driver
for this platform is already registering the driver.
Signed-off-by: Alain Volmat <avolmat@me.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
The STiH418 can be controlled the same way as STiH407 &
STiH410 regarding cpufreq.
Signed-off-by: Alain Volmat <avolmat@me.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
dev_err() allows easily to identify the device printing the message so
no need for __func__.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
[ Viresh: Don't remove update to result variable ]
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Common pattern of handling deferred probe can be simplified with
dev_err_probe(). Less code and also it prints the error value.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Commit 6cc3d0e9a0 ("cpufreq: tegra186: add
CPUFREQ_NEED_INITIAL_FREQ_CHECK flag") fixed CPUFREQ support for
Tegra186 but as a consequence the following warnings are now seen on
boot ...
cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 0 KHz
cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 2035200 KHz
cpufreq: cpufreq_online: CPU1: Running at unlisted freq: 0 KHz
cpufreq: cpufreq_online: CPU1: Unlisted initial frequency changed to: 2035200 KHz
cpufreq: cpufreq_online: CPU2: Running at unlisted freq: 0 KHz
cpufreq: cpufreq_online: CPU2: Unlisted initial frequency changed to: 2035200 KHz
cpufreq: cpufreq_online: CPU3: Running at unlisted freq: 0 KHz
cpufreq: cpufreq_online: CPU3: Unlisted initial frequency changed to: 2035200 KHz
cpufreq: cpufreq_online: CPU4: Running at unlisted freq: 0 KHz
cpufreq: cpufreq_online: CPU4: Unlisted initial frequency changed to: 2035200 KHz
cpufreq: cpufreq_online: CPU5: Running at unlisted freq: 0 KHz
cpufreq: cpufreq_online: CPU5: Unlisted initial frequency changed to: 2035200 KHz
Fix this by adding a 'get' callback for the Tegra186 CPUFREQ driver to
retrieve the current operating frequency for a given CPU. The 'get'
callback uses the current 'ndiv' value that is programmed to determine
that current operating frequency.
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
[ Viresh: Return 0 on error ]
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
cpufreq-dt is currently unable to handle -EPROBE_DEFER properly
because the error code is not propagated for the cpufreq_driver->init()
callback. Instead, it attempts to avoid the situation by temporarily
requesting all resources within resources_available() and releasing them
again immediately after. This has several disadvantages:
- Whenever we add something like interconnect handling to the OPP core
we need to patch cpufreq-dt to request these resources early.
- resources_available() is only run for CPU0, but other clusters may
eventually depend on other resources that are not available yet.
(See FIXME comment removed by this commit...)
- All resources need to be looked up several times.
Now that the OPP core can propagate -EPROBE_DEFER during initialization,
it would be nice to avoid all that trouble and just propagate its error
code when necessary.
This commit refactors the cpufreq-dt driver to initialize private_data
before registering the cpufreq driver. We do this by iterating over
all possible CPUs and ensure that all resources are initialized:
1. dev_pm_opp_get_opp_table() ensures the OPP table is allocated
and initialized with clock and interconnects.
2. dev_pm_opp_set_regulators() requests the regulators and assigns
them to the OPP table.
3. We call dev_pm_opp_of_get_sharing_cpus() early so that we only
initialize the OPP table once for each shared policy.
With these changes, we actually end up saving a few lines of code,
the resources are no longer looked up multiple times and everything
should be much more robust.
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
[ Viresh: Use list_head structure for maintaining the list and minor
changes ]
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Big cleanup for the Samsung S3C24xx and S3C64xx platforms, although it
also touches files shared with S5Pv210 and Exynos. This is mostly Arnd
Bergmann work which Krzysztof Kozlowski took over, rebased and polished.
The goal is to cleanup, merge and finally make the Samsung S3C24xx and
S3C64xx architectures multiplatform. The multiplatform did not happen
yet here - just cleaning up and merging into one arch/arm/mach-s3c
directory. However this is step forward for multiplatform or at least
to keep this code still maintainable.
This pulls also branch with changes for Samsung SoC sound drivers from
broonie/sound because the cleanups there were part of this series and
all further patches depend on them.
-----BEGIN PGP SIGNATURE-----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=bjMI
-----END PGP SIGNATURE-----
Merge tag 'samsung-soc-s3c-5.10' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/soc
Samsung S3C24xx and S3C64xx machine code cleanup for v5.10
Big cleanup for the Samsung S3C24xx and S3C64xx platforms, although it
also touches files shared with S5Pv210 and Exynos. This is mostly Arnd
Bergmann work which Krzysztof Kozlowski took over, rebased and polished.
The goal is to cleanup, merge and finally make the Samsung S3C24xx and
S3C64xx architectures multiplatform. The multiplatform did not happen
yet here - just cleaning up and merging into one arch/arm/mach-s3c
directory. However this is step forward for multiplatform or at least
to keep this code still maintainable.
This pulls also branch with changes for Samsung SoC sound drivers from
broonie/sound because the cleanups there were part of this series and
all further patches depend on them.
* tag 'samsung-soc-s3c-5.10' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: (62 commits)
ARM: s3c: Avoid naming clash of S3C24xx and S3C64xx timer setup
ARM: s3c: Cleanup from old plat-samsung include
ARM: s3c: make headers local if possible
ARM: s3c: move into a common directory
ARM: s3c24xx: stop including mach/hardware.h from mach/io.h
cpufreq: s3c24xx: move low-level clk reg access into platform code
cpufreq: s3c2412: use global s3c2412_cpufreq_setrefresh
ARM: s3c: remove cpufreq header dependencies
cpufreq: s3c24xx: split out registers
fbdev: s3c2410fb: remove mach header dependency
ARM: s3c24xx: bast: avoid irq_desc array usage
ARM: s3c24xx: spi: avoid hardcoding fiq number in driver
ARM: s3c24xx: include mach/irqs.h where needed
ARM: s3c24xx: move s3cmci pinctrl handling into board files
ARM: s3c24xx: move iis pinctrl config into boards
ARM: s3c24xx: move spi fiq handler into platform
ARM: s3c: adc: move header to linux/soc/samsung
ARM: s3c24xx: move irqchip driver back into platform
ARM: s3c24xx: move regs-spi.h into spi driver
ARM: s3c64xx: remove mach/hardware.h
...
Link: https://lore.kernel.org/r/20200831154751.7551-1-krzk@kernel.org
Signed-off-by: Olof Johansson <olof@lixom.net>
dev_pm_opp_of_remove_table() doesn't report any errors when it fails to
find the OPP table with error -ENODEV (i.e. OPP table not present for
the device). And we can call dev_pm_opp_of_remove_table()
unconditionally here.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
The perf_ops are not modified through this pointer. Make them const to
indicate that. This is in preparation to make the scmi-ops pointers in
scmi_handle const.
Link: https://lore.kernel.org/r/20200906230452.33410-2-rikard.falkeborn@gmail.com
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
This fixes the behavior of the scaling_max_freq and scaling_min_freq
sysfs files in systems which had turbo disabled by the BIOS.
Caleb noticed that the HWP is programmed to operate in the wrong
P-state range on his system when the CPUFREQ policy min/max frequency
is set via sysfs. This seems to be because in his system
intel_pstate_get_hwp_max() is returning the maximum turbo P-state even
though turbo was disabled by the BIOS, which causes intel_pstate to
scale kHz frequencies incorrectly e.g. setting the maximum turbo
frequency whenever the maximum guaranteed frequency is requested via
sysfs.
Tested-by: Caleb Callaway <caleb.callaway@intel.com>
Signed-off-by: Francisco Jerez <currojerez@riseup.net>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
[ rjw: Minor subject edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
When intel_pstate switches the operation mode from "active" to
"passive" or the other way around, freeing its data structures
representing CPUs and allocating them again from scratch is not
necessary and wasteful. Moreover, if these data structures are
preserved, the cached HWP Request MSR value from there may be
written to the MSR to start with to reinitialize it and help to
restore the EPP value set previously (it is set to 0xFF when CPUs
go offline to allow their SMT siblings to use the full range of
EPP values and that also happens when the driver gets unregistered).
Accordingly, modify the driver to only do a full cleanup on driver
object registration errors and when its status is changed to "off"
via sysfs and to write the cached HWP Request MSR value back to
the MSR on CPU init if the data structure representing the given
CPU is still there.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Add ->offline and ->online driver callbacks to prepare for taking a
CPU offline and to restore its working configuration when it goes
back online, respectively, to avoid invoking the ->init callback on
every CPU online which is quite a bit of unnecessary overhead.
Define ->offline and ->online so that they can be used in the
passive mode as well as in the active mode and because ->offline
will do the majority of ->stop_cpu work, the passive mode does
not need that callback any more, so drop it from there.
Also modify the active mode ->suspend and ->resume callbacks to
prevent them from interfering with the new ->offline and ->online
ones in case the latter are invoked withing the system-wide suspend
and resume code flow and make the passive mode use them too.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Modify the EPP sysfs interface to reject attempts to change the EPP
to values different from 0 ("performance") in the active mode with
the "performance" policy (ie. scaling_governor set to "performance"),
to avoid situations in which the kernel appears to discard data
passed to it via the EPP sysfs attribute.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Make intel_pstate update the cached EPP value when setting the EPP
via sysfs in the active mode just like it is the case in the passive
mode, for consistency, but also for the benefit of subsequent
changes.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
After commit f6ebbcf08f ("cpufreq: intel_pstate: Implement passive
mode with HWP enabled") it is possible to change the driver status
to "off" via sysfs with HWP enabled, which effectively causes the
driver to unregister itself, but HWP remains active and it forces the
minimum performance, so even if another cpufreq driver is loaded,
it will not be able to control the CPU frequency.
For this reason, make the driver refuse to change the status to
"off" with HWP enabled.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
- Make the recently added Tegra194 cpufreq driver use
read_cpuid_mpir() instead of cpu_logical_map() to avoid
exporting logical_cpu_map (Sumit Gupta).
- Drop the automatic system wakeup event reporting for devices
with pending runtime-resume requests during system-wide suspend
to avoid spurious aborts of the suspend flow (Rafael Wysocki).
- Fix build warning in the intel_pstate driver documentation and
improve the wording in there (Randy Dunlap).
- Clean up two pieces of code in the cpufreq core (Viresh Kumar).
-----BEGIN PGP SIGNATURE-----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=Q4FD
-----END PGP SIGNATURE-----
Merge tag 'pm-5.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix the recently added Tegra194 cpufreq driver and the handling
of devices using runtime PM during system-wide suspend, improve the
intel_pstate driver documentation and clean up the cpufreq core.
Specifics:
- Make the recently added Tegra194 cpufreq driver use
read_cpuid_mpir() instead of cpu_logical_map() to avoid exporting
logical_cpu_map (Sumit Gupta).
- Drop the automatic system wakeup event reporting for devices with
pending runtime-resume requests during system-wide suspend to avoid
spurious aborts of the suspend flow (Rafael Wysocki).
- Fix build warning in the intel_pstate driver documentation and
improve the wording in there (Randy Dunlap).
- Clean up two pieces of code in the cpufreq core (Viresh Kumar)"
* tag 'pm-5.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq: Use WARN_ON_ONCE() for invalid relation
cpufreq: No need to verify cpufreq_driver in show_scaling_cur_freq()
PM: sleep: core: Fix the handling of pending runtime resume requests
Documentation: fix pm/intel_pstate build warning and wording
cpufreq: replace cpu_logical_map() with read_cpuid_mpir()
"cpufreq_driver" is guaranteed to be valid here, no need to check it
here.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Commit eaecca9e77 ("arm64: Fix __cpu_logical_map undefined issue")
fixes the issue with building tegra194 cpufreq driver as module. But
the fix might cause problem while supporting physical CPU hotplug[1].
This patch fixes the original problem by avoiding use of cpu_logical_map().
Instead calling read_cpuid_mpidr() to get MPIDR on target CPU.
[1] https://lore.kernel.org/linux-arm-kernel/20200724131059.GB6521@bogus/
Fixes: df320f8935 ("cpufreq: Add Tegra194 cpufreq driver")
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Sumit Gupta <sumitg@nvidia.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
[ rjw: Subject & changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Rather than have the cpufreq drivers touch include the
common headers to get the constants, add a small indirection.
This is still not the proper way that would do this through
the common clk API, but it lets us kill off the header file
usage.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Link: https://lore.kernel.org/r/20200806182059.2431-37-krzk@kernel.org
[krzk: Rebase and fix -Wold-style-definition]
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
There are two identical copies of the s3c2412_cpufreq_setrefresh
function: a static one in the cpufreq driver and a global
version in iotiming-s3c2412.c.
As the function requires the use of a hardcoded register address
from a header that we want to not be visible to drivers, just
move the existing global function and add a declaration in
one of the cpufreq header files.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Link: https://lore.kernel.org/r/20200806182059.2431-36-krzk@kernel.org
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
The cpufreq drivers are split between the machine directory
and the drivers/cpufreq directory. In order to share header
files after we convert s3c to multiplatform, those headers
have to live in a different global location.
Move them to linux/soc/samsung/ in lack of a better place.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Link: https://lore.kernel.org/r/20200806182059.2431-35-krzk@kernel.org
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Each of the cpufreq drivers uses a fixed set of register
bits, copy those definitions into the drivers to avoid
including mach/regs-clock.h.
[krzk: Fix build by copying also S3C2410_LOCKTIME]
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Link: https://lore.kernel.org/r/20200806182059.2431-34-krzk@kernel.org
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Allow intel_pstate to work in the passive mode with HWP enabled and
make it set the HWP minimum performance limit (HWP floor) to the
P-state value given by the target frequency supplied by the cpufreq
governor, so as to prevent the HWP algorithm and the CPU scheduler
from working against each other, at least when the schedutil governor
is in use, and update the intel_pstate documentation accordingly.
Among other things, this allows utilization clamps to be taken
into account, at least to a certain extent, when intel_pstate is
in use and makes it more likely that sufficient capacity for
deadline tasks will be provided.
After this change, the resulting behavior of an HWP system with
intel_pstate in the passive mode should be close to the behavior
of the analogous non-HWP system with intel_pstate in the passive
mode, except that the HWP algorithm is generally allowed to make the
CPU run at a frequency above the floor P-state set by intel_pstate in
the entire available range of P-states, while without HWP a CPU can
run in a P-state above the requested one if the latter falls into the
range of turbo P-states (referred to as the turbo range) or if the
P-states of all CPUs in one package are coordinated with each other
at the hardware level.
[Note that in principle the HWP floor may not be taken into account
by the processor if it falls into the turbo range, in which case the
processor has a license to choose any P-state, either below or above
the HWP floor, just like a non-HWP processor in the case when the
target P-state falls into the turbo range.]
With this change applied, intel_pstate in the passive mode assumes
complete control over the HWP request MSR and concurrent changes of
that MSR (eg. via the direct MSR access interface) are overridden by
it.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
Pull ARM cpufreq driver changes for v5.9-rc1 from Viresh Kumar:
"Here are the details:
- Adaptive voltage scaling (AVS) support and minor cleanups for
brcmstb driver (Florian Fainelli and Markus Mayer).
- A new tegra driver and cleanup for the existing one (Sumit Gupta and
Jon Hunter).
- Bandwidth level support for Qcom driver along with OPP changes (Sibi
Sankar).
- Cleanups to sti, cpufreq-dt, ap806, CPPC drivers (Viresh Kumar, Lee
Jones, Ivan Kokshaysky, Sven Auhagen, and Xin Hao).
- Make schedutil default governor for ARM (Valentin Schneider).
- Fix dependency issues for imx (Walter Lozano).
- Cleanup around cached_resolved_idx in cpufreq core (Viresh Kumar)."
* 'cpufreq/arm/linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm:
cpufreq: make schedutil the default for arm and arm64
cpufreq: cached_resolved_idx can not be negative
cpufreq: Add Tegra194 cpufreq driver
dt-bindings: arm: Add NVIDIA Tegra194 CPU Complex binding
cpufreq: imx: Select NVMEM_IMX_OCOTP
cpufreq: sti-cpufreq: Fix some formatting and misspelling issues
cpufreq: tegra186: Simplify probe return path
cpufreq: CPPC: Reuse caps variable in few routines
cpufreq: ap806: fix cpufreq driver needs ap cpu clk
cpufreq: cppc: Reorder code and remove apply_hisi_workaround variable
cpufreq: dt: fix oops on armada37xx
cpufreq: brcmstb-avs-cpufreq: send S2_ENTER / S2_EXIT commands to AVS
cpufreq: brcmstb-avs-cpufreq: Support polling AVS firmware
cpufreq: brcmstb-avs-cpufreq: more flexible interface for __issue_avs_command()
cpufreq: qcom: Disable fast switch when scaling DDR/L3
cpufreq: qcom: Update the bandwidth levels on frequency change
OPP: Add and export helper to set bandwidth
cpufreq: blacklist SC7180 in cpufreq-dt-platdev
cpufreq: blacklist SDM845 in cpufreq-dt-platdev
The MSR_TURBO_RATIO_LIMIT can be 0. This is not an error. User can update
this MSR via BIOS settings on some systems or can use msr tools to update.
Also some systems boot with value = 0.
This results in display of cpufreq/cpuinfo_max_freq wrong. This value
will be equal to cpufreq/base_frequency, even though turbo is enabled.
But platform will still function normally in HWP mode as we get max
1-core frequency from the MSR_HWP_CAPABILITIES. This MSR is already used
to calculate cpu->pstate.turbo_freq, which is used for to set
policy->cpuinfo.max_freq. But some other places cpu->pstate.turbo_pstate
is used. For example to set policy->max.
To fix this, also update cpu->pstate.turbo_pstate when updating
cpu->pstate.turbo_freq.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
- Make the Energy Model cover non-CPU devices (Lukasz Luba).
- Add Ice Lake server idle states table to the intel_idle driver
and eliminate a redundant static variable from it (Chen Yu,
Rafael Wysocki).
- Eliminate all W=1 build warnings from cpufreq (Lee Jones).
- Add support for Sapphire Rapids and for Power Limit 4 to the
Intel RAPL power capping driver (Sumeet Pawnikar, Zhang Rui).
- Fix function name in kerneldoc comments in the idle_inject power
capping driver (Yangtao Li).
- Fix locking issues with cpufreq governors and drop a redundant
"weak" function definition from cpufreq (Viresh Kumar).
- Rearrange cpufreq to register non-modular governors at the
core_initcall level and allow the default cpufreq governor to
be specified in the kernel command line (Quentin Perret).
- Extend, fix and clean up the intel_pstate driver (Srinivas
Pandruvada, Rafael Wysocki):
* Add a new sysfs attribute for disabling/enabling CPU
energy-efficiency optimizations in the processor.
* Make the driver avoid enabling HWP if EPP is not supported.
* Allow the driver to handle numeric EPP values in the sysfs
interface and fix the setting of EPP via sysfs in the active
mode.
* Eliminate a static checker warning and clean up a kerneldoc
comment.
- Clean up some variable declarations in the powernv cpufreq
driver (Wei Yongjun).
- Fix up the ->enter_s2idle callback definition to cover the case
when it points to the same function as ->idle correctly (Neal
Liu).
- Rearrange and clean up the PSCI cpuidle driver (Ulf Hansson).
- Make the PM core emit "changed" uevent when adding/removing the
"wakeup" sysfs attribute of devices (Abhishek Pandit-Subedi).
- Add a helper macro for declaring PM callbacks and use it in the
MMC jz4740 driver (Paul Cercueil).
- Fix white space in some places in the hibernate code and make the
system-wide PM code use "const char *" where appropriate (Xiang
Chen, Alexey Dobriyan).
- Add one more "unsafe" helper macro to the freezer to cover the NFS
use case (He Zhe).
- Change the language in the generic PM domains framework to use
parent/child terminology and clean up a typo and some comment
fromatting in that code (Kees Cook, Geert Uytterhoeven).
- Update the operating performance points OPP framework (Lukasz
Luba, Andrew-sh.Cheng, Valdis Kletnieks):
* Refactor dev_pm_opp_of_register_em() and update related drivers.
* Add a missing function export.
* Allow disabled OPPs in dev_pm_opp_get_freq().
- Update devfreq core and drivers (Chanwoo Choi, Lukasz Luba, Enric
Balletbo i Serra, Dmitry Osipenko, Kieran Bingham, Marc Zyngier):
* Add support for delayed timers to the devfreq core and make the
Samsung exynos5422-dmc driver use it.
* Unify sysfs interface to use "df-" as a prefix in instance names
consistently.
* Fix devfreq_summary debugfs node indentation.
* Add the rockchip,pmu phandle to the rk3399_dmc driver DT
bindings.
* List Dmitry Osipenko as the Tegra devfreq driver maintainer.
* Fix typos in the core devfreq code.
- Update the pm-graph utility to version 5.7 including a number of
fixes related to suspend-to-idle (Todd Brandt).
- Fix coccicheck errors and warnings in the cpupower utility (Shuah
Khan).
- Replace HTTP links with HTTPs ones in multiple places (Alexander
A. Klimov).
-----BEGIN PGP SIGNATURE-----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=8cUO
-----END PGP SIGNATURE-----
Merge tag 'pm-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"The most significant change here is the extension of the Energy Model
to cover non-CPU devices (as well as CPUs) from Lukasz Luba.
There is also some new hardware support (Ice Lake server idle states
table for intel_idle, Sapphire Rapids and Power Limit 4 support in the
RAPL driver), some new functionality in the existing drivers (eg. a
new switch to disable/enable CPU energy-efficiency optimizations in
intel_pstate, delayed timers in devfreq), some assorted fixes (cpufreq
core, intel_pstate, intel_idle) and cleanups (eg. cpuidle-psci,
devfreq), including the elimination of W=1 build warnings from cpufreq
done by Lee Jones.
Specifics:
- Make the Energy Model cover non-CPU devices (Lukasz Luba).
- Add Ice Lake server idle states table to the intel_idle driver and
eliminate a redundant static variable from it (Chen Yu, Rafael
Wysocki).
- Eliminate all W=1 build warnings from cpufreq (Lee Jones).
- Add support for Sapphire Rapids and for Power Limit 4 to the Intel
RAPL power capping driver (Sumeet Pawnikar, Zhang Rui).
- Fix function name in kerneldoc comments in the idle_inject power
capping driver (Yangtao Li).
- Fix locking issues with cpufreq governors and drop a redundant
"weak" function definition from cpufreq (Viresh Kumar).
- Rearrange cpufreq to register non-modular governors at the
core_initcall level and allow the default cpufreq governor to be
specified in the kernel command line (Quentin Perret).
- Extend, fix and clean up the intel_pstate driver (Srinivas
Pandruvada, Rafael Wysocki):
* Add a new sysfs attribute for disabling/enabling CPU
energy-efficiency optimizations in the processor.
* Make the driver avoid enabling HWP if EPP is not supported.
* Allow the driver to handle numeric EPP values in the sysfs
interface and fix the setting of EPP via sysfs in the active
mode.
* Eliminate a static checker warning and clean up a kerneldoc
comment.
- Clean up some variable declarations in the powernv cpufreq driver
(Wei Yongjun).
- Fix up the ->enter_s2idle callback definition to cover the case
when it points to the same function as ->idle correctly (Neal Liu).
- Rearrange and clean up the PSCI cpuidle driver (Ulf Hansson).
- Make the PM core emit "changed" uevent when adding/removing the
"wakeup" sysfs attribute of devices (Abhishek Pandit-Subedi).
- Add a helper macro for declaring PM callbacks and use it in the MMC
jz4740 driver (Paul Cercueil).
- Fix white space in some places in the hibernate code and make the
system-wide PM code use "const char *" where appropriate (Xiang
Chen, Alexey Dobriyan).
- Add one more "unsafe" helper macro to the freezer to cover the NFS
use case (He Zhe).
- Change the language in the generic PM domains framework to use
parent/child terminology and clean up a typo and some comment
fromatting in that code (Kees Cook, Geert Uytterhoeven).
- Update the operating performance points OPP framework (Lukasz Luba,
Andrew-sh.Cheng, Valdis Kletnieks):
* Refactor dev_pm_opp_of_register_em() and update related drivers.
* Add a missing function export.
* Allow disabled OPPs in dev_pm_opp_get_freq().
- Update devfreq core and drivers (Chanwoo Choi, Lukasz Luba, Enric
Balletbo i Serra, Dmitry Osipenko, Kieran Bingham, Marc Zyngier):
* Add support for delayed timers to the devfreq core and make the
Samsung exynos5422-dmc driver use it.
* Unify sysfs interface to use "df-" as a prefix in instance
names consistently.
* Fix devfreq_summary debugfs node indentation.
* Add the rockchip,pmu phandle to the rk3399_dmc driver DT
bindings.
* List Dmitry Osipenko as the Tegra devfreq driver maintainer.
* Fix typos in the core devfreq code.
- Update the pm-graph utility to version 5.7 including a number of
fixes related to suspend-to-idle (Todd Brandt).
- Fix coccicheck errors and warnings in the cpupower utility (Shuah
Khan).
- Replace HTTP links with HTTPs ones in multiple places (Alexander A.
Klimov)"
* tag 'pm-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (71 commits)
cpuidle: ACPI: fix 'return' with no value build warning
cpufreq: intel_pstate: Fix EPP setting via sysfs in active mode
cpufreq: intel_pstate: Rearrange the storing of new EPP values
intel_idle: Customize IceLake server support
PM / devfreq: Fix the wrong end with semicolon
PM / devfreq: Fix indentaion of devfreq_summary debugfs node
PM / devfreq: Clean up the devfreq instance name in sysfs attr
memory: samsung: exynos5422-dmc: Add module param to control IRQ mode
memory: samsung: exynos5422-dmc: Adjust polling interval and uptreshold
memory: samsung: exynos5422-dmc: Use delayed timer as default
PM / devfreq: Add support delayed timer for polling mode
dt-bindings: devfreq: rk3399_dmc: Add rockchip,pmu phandle
PM / devfreq: tegra: Add Dmitry as a maintainer
PM / devfreq: event: Fix trivial spelling
PM / devfreq: rk3399_dmc: Fix kernel oops when rockchip,pmu is absent
cpuidle: change enter_s2idle() prototype
cpuidle: psci: Prevent domain idlestates until consumers are ready
cpuidle: psci: Convert PM domain to platform driver
cpuidle: psci: Fix error path via converting to a platform driver
cpuidle: psci: Fail cpuidle registration if set OSI mode failed
...
A couple of subsystems have their own subsystem maintainers but choose
to have the code merged through the soc tree as upstream, as the code
tends to be used across multiple SoCs or has SoC specific drivers itself:
- memory controllers:
Krzysztof Kozlowski takes ownership of the drivers/memory
subsystem and its drivers, starting out with a set of cleanup
patches.
A larger driver for the Tegra memory controller that was accidentally
missed for v5.8 is now added.
- reset controllers:
Only minor updates to drivers/reset this time
- firmware:
The "turris mox" firmware driver gains support for signed firmware blobs
The tegra firmware driver gets extended to export some debug information
Various updates to i.MX firmware drivers, mostly cosmetic
- ARM SCMI/SCPI:
A new mechanism for platform notifications is added, among a number
of minor changes.
- optee:
Probing of the TEE bus is rewritten to better support detection of
devices that depend on the tee-supplicant user space.
A new firmware based trusted platform module (fTPM) driver is added
based on OP-TEE
- SoC attributes:
A new driver is added to provide a generic soc_device for identifying
a machine through the SMCCC ARCH_SOC_ID firmware interface rather than
by probing SoC family specific registers.
The series also contains some cleanups to the common soc_device code.
There are also a number of updates to SoC specific drivers,
the main ones are:
- Mediatek cmdq driver gains a few in-kernel interfaces
- Minor updates to Qualcomm RPMh, socinfo, rpm drivers, mostly adding
support for additional SoC variants
- The Qualcomm GENI core code gains interconnect path voting and
performance level support, and integrating this into a number of
device drivers.
- A new driver for Samsung Exynos5800 voltage coupler for
- Renesas RZ/G2H (R8A774E1) SoC support gets added to a couple of SoC
specific device drivers
- Updates to the TI K3 Ring Accelerator driver
-----BEGIN PGP SIGNATURE-----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=nezz
-----END PGP SIGNATURE-----
Merge tag 'arm-drivers-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC driver updates from Arnd Bergmann:
"A couple of subsystems have their own subsystem maintainers but choose
to have the code merged through the soc tree as upstream, as the code
tends to be used across multiple SoCs or has SoC specific drivers
itself:
- memory controllers:
Krzysztof Kozlowski takes ownership of the drivers/memory subsystem
and its drivers, starting out with a set of cleanup patches.
A larger driver for the Tegra memory controller that was
accidentally missed for v5.8 is now added.
- reset controllers:
Only minor updates to drivers/reset this time
- firmware:
The "turris mox" firmware driver gains support for signed firmware
blobs The tegra firmware driver gets extended to export some debug
information Various updates to i.MX firmware drivers, mostly
cosmetic
- ARM SCMI/SCPI:
A new mechanism for platform notifications is added, among a number
of minor changes.
- optee:
Probing of the TEE bus is rewritten to better support detection of
devices that depend on the tee-supplicant user space. A new
firmware based trusted platform module (fTPM) driver is added based
on OP-TEE
- SoC attributes:
A new driver is added to provide a generic soc_device for
identifying a machine through the SMCCC ARCH_SOC_ID firmware
interface rather than by probing SoC family specific registers.
The series also contains some cleanups to the common soc_device
code.
There are also a number of updates to SoC specific drivers, the main
ones are:
- Mediatek cmdq driver gains a few in-kernel interfaces
- Minor updates to Qualcomm RPMh, socinfo, rpm drivers, mostly adding
support for additional SoC variants
- The Qualcomm GENI core code gains interconnect path voting and
performance level support, and integrating this into a number of
device drivers.
- A new driver for Samsung Exynos5800 voltage coupler for
- Renesas RZ/G2H (R8A774E1) SoC support gets added to a couple of SoC
specific device drivers
- Updates to the TI K3 Ring Accelerator driver"
* tag 'arm-drivers-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (164 commits)
soc: qcom: geni: Fix unused label warning
soc: qcom: smd-rpm: Fix kerneldoc
memory: jz4780_nemc: Only request IO memory the driver will use
soc: qcom: pdr: Reorder the PD state indication ack
MAINTAINERS: Add Git repository for memory controller drivers
memory: brcmstb_dpfe: Fix language typo
memory: samsung: exynos5422-dmc: Correct white space issues
memory: samsung: exynos-srom: Correct alignment
memory: pl172: Enclose macro argument usage in parenthesis
memory: of: Correct kerneldoc
memory: omap-gpmc: Fix language typo
memory: omap-gpmc: Correct white space issues
memory: omap-gpmc: Use 'unsigned int' for consistency
memory: omap-gpmc: Enclose macro argument usage in parenthesis
memory: omap-gpmc: Correct kerneldoc
memory: mvebu-devbus: Align with open parenthesis
memory: mvebu-devbus: Add missing braces to all arms of if statement
memory: bt1-l2-ctl: Add blank lines after declarations
soc: TI knav_qmss: make symbol 'knav_acc_range_ops' static
firmware: ti_sci: Replace HTTP links with HTTPS ones
...
-----BEGIN PGP SIGNATURE-----
iQFHBAABCAAxFiEEeOVYVaWZL5900a/pOQOGJssO/ZEFAl8eiUATHHJwcHRAbGlu
dXguaWJtLmNvbQAKCRA5A4Ymyw79kWs8B/4wEWVJGTkjyrMX57/Ew8yRYAJE6JjA
kSONPjElVrPR1pRLYyjyde+zqumkJFhk+41De09J2byL29p7tK8ISNrTwJrIN7n/
dzT73CmuNEjI0rZJxPX+USKFph75FQVvAVOOWs+6fiBFxdUaIsBheVntH7/NsCTk
HFrIjIn5wXFVs5Nh+2cHydvEpOVoUWzjvs+uJIEpHCVCBz6gaYq2dxEmeTquKuz1
k7PZqCqVsyB9iWLqN65/Q+30N8znJwcUl8HAzs5nvPrXLjGxwuEjOxtYYhbdLAfP
OBiIF9J77sZxBlms0WNomDW3Rr5Vlt5nF9oUWpi3AmHNWIuX0GkM4i0C
=V+Kl
-----END PGP SIGNATURE-----
Merge tag 'rm-unicore32' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/linux
Pull unicore32 removal from Mike Rapoport:
"Remove unicore32 support.
The unicore32 port do not seem maintained for a long time now, there
is no upstream toolchain that can create unicore32 binaries and all
the links to prebuilt toolchains for unicore32 are dead. Even
compilers that were available are not supported by the kernel anymore.
Guenter Roeck says:
"I have stopped building unicore32 images since v4.19 since there is
no available compiler that is still supported by the kernel. I am
surprised that support for it has not been removed from the kernel"
However, it's worth pointing out two things:
- Guan Xuetao is still listed as maintainer and asked for the port to
be kept around the last time Arnd suggested removing it two years
ago. He promised that there would be compiler sources (presumably
llvm), but has not made those available since.
- https://github.com/gxt has patches to linux-4.9 and qemu-2.7, both
released in 2016, with patches dated early 2019. These patches
mainly restore a syscall ABI that was never part of mainline Linux
but apparently used in production. qemu-2.8 removed support for
that ABI and newer kernels (4.19+) can no longer be built with the
old toolchain, so apparently there will not be any future updates
to that git tree"
* tag 'rm-unicore32' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/linux:
MAINTAINERS: remove "PKUNITY SOC DRIVERS" entry
rtc: remove fb-puv3 driver
video: fbdev: remove fb-puv3 driver
pwm: remove pwm-puv3 driver
input: i8042: remove support for 8042-unicore32io
i2c/buses: remove i2c-puv3 driver
cpufreq: remove unicore32 driver
arch: remove unicore32 port
* pm-cpufreq: (24 commits)
cpufreq: intel_pstate: Fix EPP setting via sysfs in active mode
cpufreq: intel_pstate: Rearrange the storing of new EPP values
cpufreq: intel_pstate: Avoid enabling HWP if EPP is not supported
cpufreq: intel_pstate: Clean up aperf_mperf_shift description
cpufreq: powernv: Make some symbols static
cpufreq: amd_freq_sensitivity: Mark sometimes used ID structs as __maybe_unused
cpufreq: intel_pstate: Supply struct attribute description for get_aperf_mperf_shift()
cpufreq: pcc-cpufreq: Mark sometimes used ID structs as __maybe_unused
cpufreq: powernow-k8: Mark 'hi' and 'lo' dummy variables as __always_unused
cpufreq: acpi-cpufreq: Mark sometimes used ID structs as __maybe_unused
cpufreq: acpi-cpufreq: Mark 'dummy' variable as __always_unused
cpufreq: powernv-cpufreq: Fix a bunch of kerneldoc related issues
cpufreq: pasemi: Include header file for {check,restore}_astate prototypes
cpufreq: cpufreq_governor: Demote store_sampling_rate() header to standard comment block
cpufreq: cpufreq: Demote lots of function headers unworthy of kerneldoc status
cpufreq: freq_table: Demote obvious misuse of kerneldoc to standard comment blocks
cpufreq: Replace HTTP links with HTTPS ones
cpufreq: intel_pstate: Fix static checker warning for epp variable
cpufreq: Remove the weakly defined cpufreq_default_governor()
cpufreq: Specify default governor on command line
...
* pm-em:
OPP: refactor dev_pm_opp_of_register_em() and update related drivers
Documentation: power: update Energy Model description
PM / EM: change name of em_pd_energy to em_cpu_energy
PM / EM: remove em_register_perf_domain
PM / EM: add support for other devices than CPUs in Energy Model
PM / EM: update callback structure and add device pointer
PM / EM: introduce em_dev_register_perf_domain function
PM / EM: change naming convention from 'capacity' to 'performance'
* pm-core:
mmc: jz4740: Use pm_ptr() macro
PM: Make *_DEV_PM_OPS macros use __maybe_unused
PM: core: introduce pm_ptr() macro
Because intel_pstate_set_energy_pref_index() reads and writes the
MSR_HWP_REQUEST register without using the cached value of it used by
intel_pstate_hwp_boost_up() and intel_pstate_hwp_boost_down(), those
functions may overwrite the value written by it and so the EPP value
set via sysfs may be lost.
To avoid that, make intel_pstate_set_energy_pref_index() take the
cached value of MSR_HWP_REQUEST just like the other two routines
mentioned above and update it with the new EPP value coming from
user space in addition to updating the MSR.
Note that the MSR itself still needs to be updated too in case
hwp_boost is unset or the boosting mechanism is not active at the
EPP change time.
Fixes: e0efd5be63 ("cpufreq: intel_pstate: Add HWP boost utility and sched util hooks")
Reported-by: Francisco Jerez <currojerez@riseup.net>
Cc: 4.18+ <stable@vger.kernel.org> # 4.18+: 3da97d4db8ee cpufreq: intel_pstate: Rearrange ...
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
Move the locking away from intel_pstate_set_energy_pref_index()
into its only caller and drop the (now redundant) return_pref label
from it.
Also move the "raw" EPP value check into the caller of that function,
so as to do it before acquiring the mutex, and reduce code duplication
related to the "raw" EPP values processing somewhat.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
schedutil is already a hard-requirement for EAS, which has lead to making
it default on arm (when CONFIG_BIG_LITTLE), see:
commit 8fdcca8e25 ("cpufreq: Select schedutil when using big.LITTLE")
One thing worth pointing out is that schedutil isn't only relevant for
asymmetric CPU capacity systems; for instance, schedutil is the only
governor that honours util-clamp performance requests. Another good example
of this is x86 switching to using it by default in:
commit a00ec3874e ("cpufreq: intel_pstate: Select schedutil as the default governor")
Arguably it should be made the default for all architectures, but it seems
better to wait for them to also gain frequency invariance powers. Make it
the default for arm && arm64 for now.
Signed-off-by: Valentin Schneider <valentin.schneider@arm.com>
Signed-off-by: Ionela Voinescu <ionela.voinescu@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Rafael J. Wysocki <rjw@rjwysocki.net>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
It is not possible for cached_resolved_idx to be invalid here as the
cpufreq core always sets index to a positive value.
Change its type to unsigned int and fix qcom usage a bit.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Add support for CPU frequency scaling on Tegra194. The frequency
of each core can be adjusted by writing a clock divisor value to
a MSR on the core. The range of valid divisors is queried from
the BPMP.
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Sumit Gupta <sumitg@nvidia.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
When probing cpufreq for iMX6 the values in the efuse needs to be
read which requires NVMEM_IMX_OCOTP. If this option is not enabled,
the probe will be deferred forever and cpufreq won't be available.
This patch forces the selection of the required configuration option.
Signed-off-by: Walter Lozano <walter.lozano@collabora.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Kerneldoc format for attribute descriptions should be '@.*: '.
Fixes the following W=1 kernel build warning(s):
drivers/cpufreq/sti-cpufreq.c:49: warning: cannot understand function prototype: 'struct sti_cpufreq_ddata '
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Cc: Patrice Chotard <patrice.chotard@st.com>
Cc: Pal Singh <ajitpal.singh@st.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
We always put the reference to BPMP device on exit of the Tegra186
CPUFREQ driver and so there is no need to have separate exit paths
for success and failure. Therefore, simplify the probe return path
in the Tegra186 CPUFREQ driver by combining the success and failure
paths.
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
The 'caps' variable has been defined in cppc_cpufreq_khz_to_perf() and
cppc_cpufreq_perf_to_khz() routines, so there is no need to get
'highest_perf' value through 'cpu->caps.highest_perf', we can use
'caps->highest_perf' instead.
Signed-off-by: Xin Hao <xhao@linux.alibaba.com>
[ Viresh: Updated commit log ]
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
The Armada 8K cpufreq driver needs the Armada AP CPU CLK
to work. This dependency is currently not satisfied and
the ARMADA_AP_CPU_CLK can not be selected independently.
Add it to the cpufreq Armada8k driver.
Fixes: f525a67053 ("cpufreq: ap806: add cpufreq driver for Armada 8K")
Signed-off-by: Sven Auhagen <sven.auhagen@voleatech.de>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
With the current approach we have an extra check in the
cppc_cpufreq_get_rate() callback, which checks if hisilicon's get rate
implementation should be used instead. While it works fine, the approach
isn't very straight forward, over that we have an extra check in the
routine.
Rearrange code and update the cpufreq driver's get() callback pointer
directly for the hisilicon case. This gets the extra variable is removed
and the extra check isn't required anymore as well.
Tested-by: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Commit 0c868627e6 (cpufreq: dt: Allow platform specific
intermediate callbacks) added two function pointers to the
struct cpufreq_dt_platform_data. However, armada37xx_cpufreq_driver_init()
has this struct (pdata) located on the stack and uses only "suspend"
and "resume" fields. So these newly added "get_intermediate" and
"target_intermediate" pointers are uninitialized and contain arbitrary
non-null values, causing all kinds of trouble.
For instance, here is an oops on espressobin after an attempt to change
the cpefreq governor:
[ 29.174554] Unable to handle kernel execute from non-executable memory at virtual address ffff00003f87bdc0
...
[ 29.269373] pc : 0xffff00003f87bdc0
[ 29.272957] lr : __cpufreq_driver_target+0x138/0x580
...
Fixed by zeroing out pdata before use.
Cc: <stable@vger.kernel.org> # v5.7+
Signed-off-by: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
On suspend we send AVS_CMD_S2_ENTER and on resume AVS_CMD_S2_EXIT.
These are best effort calls, so we don't check the return code or take
any action if either of the calls fails.
Signed-off-by: Markus Mayer <mmayer@broadcom.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
In case the interrupt towards the host is never raised, yet the AVS
firmware responds correctly within the alloted time, allow supporting a
polling mode.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Markus Mayer <mmayer@broadcom.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
We are changing how parameters are passed to __issue_avs_command(), so we
can pass input *and* output arguments with the same command, rather than
just one or the other.
Signed-off-by: Markus Mayer <mmayer@broadcom.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Disable fast switch when the opp-tables required for scaling DDR/L3
are populated.
Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Add support to parse optional OPP table attached to the cpu node when
the OPP bandwidth values are populated. This allows for scaling of
DDR/L3 bandwidth levels with frequency change.
Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Although there are processors supporting hardware-managed P-states
(HWP) without the energy-performance preference (EPP) feature, they
are not expected to be run with HWP enabled (the BIOS should disable
HWP on those systems). Missing EPP support generally indicates an
incomplete HWP implementation and so it is better to avoid using
HWP on those systems in production.
However, intel_pstate currently enables HWP on such systems, which
is questionable, so prevent it from doing that by making it check
EPP support before enabling HWP and avoid enabling it if EPP is not
supported by the processor at hand.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The kerneldoc description of the aperf_mperf_shift field in
struct global_params is unclear and there is a typo in it, so
simplify it and clean it up.
Reported-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Lee Jones <lee.jones@linaro.org>
The sparse tool complains as follows:
drivers/cpufreq/powernv-cpufreq.c:88:1: warning:
symbol 'pstate_revmap' was not declared. Should it be static?
drivers/cpufreq/powernv-cpufreq.c:383:18: warning:
symbol 'cpufreq_freq_attr_cpuinfo_nominal_freq' was not declared. Should it be static?
drivers/cpufreq/powernv-cpufreq.c:669:6: warning:
symbol 'gpstate_timer_handler' was not declared. Should it be static?
drivers/cpufreq/powernv-cpufreq.c:902:6: warning:
symbol 'powernv_cpufreq_work_fn' was not declared. Should it be static?
Those symbols are not used outside of this file, so mark
them static.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ot used when MODULE is not defined.
Fixes the following W=1 kernel build warning(s):
drivers/cpufreq/amd_freq_sensitivity.c:147:32: warning: ‘amd_freq_sensitivity_ids’ defined but not used [-Wunused-const-variable=]
147 | static const struct x86_cpu_id amd_freq_sensitivity_ids[] = {
| ^~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Fixes the following W=1 kernel build warning(s):
drivers/cpufreq/intel_pstate.c:293: warning: Function parameter or member 'get_aperf_mperf_shift' not described in 'pstate_funcs'
Suggested-by: "Rafael J. Wysocki" <rafael@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
[ rjw: Remove line break ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Not used when MODULE is not defined.
Fixes the following W=1 kernel build warning(s):
drivers/cpufreq/pcc-cpufreq.c:619:36: warning: ‘processor_device_ids’ defined but not used [-Wunused-const-variable=]
619 | static const struct acpi_device_id processor_device_ids[] = {
| ^~~~~~~~~~~~~~~~~~~~
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
if we fail to use a variable, even a dummy ones, then the compiler
complains that it is set but not used. We know this is fine, so we
set them as __always_unused here to let the compiler know.
Fixes the following W=1 kernel build warning(s):
drivers/cpufreq/powernow-k8.c: In function ‘pending_bit_stuck’:
drivers/cpufreq/powernow-k8.c:89:10: warning: variable ‘hi’ set but not used [-Wunused-but-set-variable]
89 | u32 lo, hi;
| ^~
drivers/cpufreq/powernow-k8.c: In function ‘core_voltage_pre_transition’:
drivers/cpufreq/powernow-k8.c:285:14: warning: variable ‘lo’ set but not used [-Wunused-but-set-variable]
285 | u32 maxvid, lo, rvomult = 1;
| ^~
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Not used when MODULE is not defined.
Fixes the following W=1 kernel build warning(s):
drivers/cpufreq/acpi-cpufreq.c:1004:36: warning: ‘processor_device_ids’ defined but not used [-Wunused-const-variable=]
997 | static const struct x86_cpu_id acpi_cpufreq_ids[] = {
| ^~~~~~~~~~~~~~~~
drivers/cpufreq/acpi-cpufreq.c:997:32: warning: ‘acpi_cpufreq_ids’ defined but not used [-Wunused-const-variable=]
619 | static const struct acpi_device_id processor_device_ids[] = {
| ^~~~~~~~~~~~~~~~~~~~
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
If we fail to use a variable, even a 'dummy' one, then the compiler
complains that it is set but not used. We know this is fine, so we
set it as __always_unused to let the compiler know.
Fixes the following W=1 kernel build warning(s):
drivers/cpufreq/acpi-cpufreq.c: In function ‘cpu_freq_read_intel’:
drivers/cpufreq/acpi-cpufreq.c:247:11: warning: variable ‘dummy’ set but not used [-Wunused-but-set-variable]
drivers/cpufreq/acpi-cpufreq.c: In function ‘cpu_freq_read_amd’:
drivers/cpufreq/acpi-cpufreq.c:265:11: warning: variable ‘dummy’ set but not used [-Wunused-but-set-variable]
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Repair problems with formatting and missing attributes/parameters, and
demote header comments which do not meet the required standards
applicable to kerneldoc.
Fixes the following W=1 kernel build warning(s):
drivers/cpufreq/powernv-cpufreq.c:84: warning: Function parameter or member 'last_lpstate_idx' not described in 'global_pstate_info'
drivers/cpufreq/powernv-cpufreq.c:84: warning: Function parameter or member 'last_gpstate_idx' not described in 'global_pstate_info'
drivers/cpufreq/powernv-cpufreq.c:84: warning: Function parameter or member 'policy' not described in 'global_pstate_info'
drivers/cpufreq/powernv-cpufreq.c:182: warning: Function parameter or member 'i' not described in 'idx_to_pstate'
drivers/cpufreq/powernv-cpufreq.c:201: warning: Function parameter or member 'pstate' not described in 'pstate_to_idx'
drivers/cpufreq/powernv-cpufreq.c:670: warning: Function parameter or member 't' not described in 'gpstate_timer_handler'
drivers/cpufreq/powernv-cpufreq.c:670: warning: Excess function parameter 'data' description in 'gpstate_timer_handler'
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
If function callers and providers do not share the same prototypes the
compiler complains of missing prototypes. Fix this by including the
correct platforms header file.
Fixes the following W=1 kernel build warning(s):
drivers/cpufreq/pasemi-cpufreq.c:109:5: warning: no previous prototype for ‘check_astate’ [-Wmissing-prototypes]
109 | int check_astate(void)
| ^~~~~~~~~~~~
drivers/cpufreq/pasemi-cpufreq.c:114:6: warning: no previous prototype for ‘restore_astate’ [-Wmissing-prototypes]
114 | void restore_astate(int cpu)
| ^~~~~~~~~~~~~~
Suggested-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
There is no need for this to be denoted as kerneldoc.
Fixes the following W=1 kernel build warning(s):
drivers/cpufreq/cpufreq_governor.c:46: warning: Function parameter or member 'attr_set' not described in 'store_sampling_rate'
drivers/cpufreq/cpufreq_governor.c:46: warning: Function parameter or member 'buf' not described in 'store_sampling_rate'
drivers/cpufreq/cpufreq_governor.c:46: warning: Function parameter or member 'count' not described in 'store_sampling_rate'
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Also provide missing function parameter description for 'cpu' and 'policy'.
Fixes the following W=1 kernel build warning(s):
drivers/cpufreq/cpufreq.c:60: warning: cannot understand function prototype: 'struct cpufreq_driver *cpufreq_driver; '
drivers/cpufreq/cpufreq.c:90: warning: Function parameter or member 'cpufreq_policy_notifier_list' not described in 'BLOCKING_NOTIFIER_HEAD'
drivers/cpufreq/cpufreq.c:312: warning: Function parameter or member 'val' not described in 'adjust_jiffies'
drivers/cpufreq/cpufreq.c:312: warning: Function parameter or member 'ci' not described in 'adjust_jiffies'
drivers/cpufreq/cpufreq.c:538: warning: Function parameter or member 'policy' not described in 'cpufreq_driver_resolve_freq'
drivers/cpufreq/cpufreq.c:686: warning: Function parameter or member 'file_name' not described in 'show_one'
drivers/cpufreq/cpufreq.c:686: warning: Function parameter or member 'object' not described in 'show_one'
drivers/cpufreq/cpufreq.c:731: warning: Function parameter or member 'file_name' not described in 'store_one'
drivers/cpufreq/cpufreq.c:731: warning: Function parameter or member 'object' not described in 'store_one'
drivers/cpufreq/cpufreq.c:741: warning: Function parameter or member 'policy' not described in 'show_cpuinfo_cur_freq'
drivers/cpufreq/cpufreq.c:741: warning: Function parameter or member 'buf' not described in 'show_cpuinfo_cur_freq'
drivers/cpufreq/cpufreq.c:754: warning: Function parameter or member 'policy' not described in 'show_scaling_governor'
drivers/cpufreq/cpufreq.c:754: warning: Function parameter or member 'buf' not described in 'show_scaling_governor'
drivers/cpufreq/cpufreq.c:770: warning: Function parameter or member 'policy' not described in 'store_scaling_governor'
drivers/cpufreq/cpufreq.c:770: warning: Function parameter or member 'buf' not described in 'store_scaling_governor'
drivers/cpufreq/cpufreq.c:770: warning: Function parameter or member 'count' not described in 'store_scaling_governor'
drivers/cpufreq/cpufreq.c:806: warning: Function parameter or member 'policy' not described in 'show_scaling_driver'
drivers/cpufreq/cpufreq.c:806: warning: Function parameter or member 'buf' not described in 'show_scaling_driver'
drivers/cpufreq/cpufreq.c:815: warning: Function parameter or member 'policy' not described in 'show_scaling_available_governors'
drivers/cpufreq/cpufreq.c:815: warning: Function parameter or member 'buf' not described in 'show_scaling_available_governors'
drivers/cpufreq/cpufreq.c:859: warning: Function parameter or member 'policy' not described in 'show_related_cpus'
drivers/cpufreq/cpufreq.c:859: warning: Function parameter or member 'buf' not described in 'show_related_cpus'
drivers/cpufreq/cpufreq.c:867: warning: Function parameter or member 'policy' not described in 'show_affected_cpus'
drivers/cpufreq/cpufreq.c:867: warning: Function parameter or member 'buf' not described in 'show_affected_cpus'
drivers/cpufreq/cpufreq.c:901: warning: Function parameter or member 'policy' not described in 'show_bios_limit'
drivers/cpufreq/cpufreq.c:901: warning: Function parameter or member 'buf' not described in 'show_bios_limit'
drivers/cpufreq/cpufreq.c:1625: warning: Function parameter or member 'dev' not described in 'cpufreq_remove_dev'
drivers/cpufreq/cpufreq.c:1625: warning: Function parameter or member 'sif' not described in 'cpufreq_remove_dev'
drivers/cpufreq/cpufreq.c:2380: warning: Function parameter or member 'cpu' not described in 'cpufreq_get_policy'
drivers/cpufreq/cpufreq.c:2771: warning: Function parameter or member 'driver' not described in 'cpufreq_unregister_driver'
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
No attempt has been made to document any of the demoted functions here.
Fixes the following W=1 kernel build warning(s):
drivers/cpufreq/freq_table.c:229: warning: Function parameter or member 'policy' not described in 'show_available_freqs'
drivers/cpufreq/freq_table.c:229: warning: Function parameter or member 'buf' not described in 'show_available_freqs'
drivers/cpufreq/freq_table.c:229: warning: Function parameter or member 'show_boost' not described in 'show_available_freqs'
drivers/cpufreq/freq_table.c:269: warning: Function parameter or member 'policy' not described in 'scaling_available_frequencies_show'
drivers/cpufreq/freq_table.c:269: warning: Function parameter or member 'buf' not described in 'scaling_available_frequencies_show'
drivers/cpufreq/freq_table.c:281: warning: Function parameter or member 'policy' not described in 'scaling_boost_frequencies_show'
drivers/cpufreq/freq_table.c:281: warning: Function parameter or member 'buf' not described in 'scaling_boost_frequencies_show'
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
If intel_pstate starts in the passive mode by default (that happens
when the processor in the system doesn't support HWP), passing
intel_pstate=active in the kernel command line doesn't work, so
fix that.
Fixes: 33aa46f252 ("cpufreq: intel_pstate: Use passive mode by default without HWP")
Reported-by: Doug Smythies <dsmythies@telus.net>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Doug Smythies <dsmythies@telus.net>
Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.
Deterministic algorithm:
For each file:
If not .svg:
For each line:
If doesn't contain `\bxmlns\b`:
For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`:
If both the HTTP and HTTPS versions
return 200 OK and serve the same content:
Replace HTTP with HTTPS.
Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Fix warning for:
drivers/cpufreq/intel_pstate.c:731 store_energy_performance_preference()
error: uninitialized symbol 'epp'.
This warning is for a case, when energy_performance_preference attribute
matches pre defined strings. In this case the value of raw epp will not
be used to set EPP bits in MSR_HWP_REQUEST. So initializing with any
value is fine.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The default cpufreq governor is chosen with the help of a "choice"
option in the Kconfig which will always end up selecting one of
the governors and so the weakly defined definition of
cpufreq_default_governor() will never get called.
Moreover, this makes us skip the checking of the return value of
that routine as it will always be non NULL.
If the Kconfig option changes in future, then we will start getting
a link error instead (and it won't go unnoticed as in the case of the
weak definition).
Suggested-by: Quentin Perret <qperret@google.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Currently, the only way to specify the default CPUfreq governor is
via Kconfig options, which suits users who can build the kernel
themselves perfectly.
However, for those who use a distro-like kernel (such as Android,
with the Generic Kernel Image project), the only way to use a
non-default governor is to boot to userspace, and to then switch
using the sysfs interface. Being able to specify the default governor
on the command line, like is the case for cpuidle, would allow those
users to specify their governor of choice earlier on, and to simplify
the userspace boot procedure slighlty.
To support this use-case, add a kernel command line parameter
allowing the default governor for CPUfreq to be specified, which
takes precedence over the built-in default.
This implementation has one notable limitation: the default governor
must be registered before the driver. This is solved for builtin
governors and drivers using appropriate *_initcall() functions. And
in the modular case, this must be reflected as a constraint on the
module loading order.
Signed-off-by: Quentin Perret <qperret@google.com>
[ Viresh: Converted 'default_governor' to a string and parsing it only
at initcall level, and several updates to
cpufreq_init_policy(). ]
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
[ rjw: Changelog ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Currently, most CPUFreq governors are registered at the core_initcall
time when the given governor is the default one, and the module_init
time otherwise.
In preparation for letting users specify the default governor on the
kernel command line, change all of them to be registered at the
core_initcall unconditionally, as it is already the case for the
schedutil and performance governors. This will allow us to assume
that builtin governors have been registered before the built-in
CPUFreq drivers probe.
And since all governors have similar init/exit patterns now, introduce
two new macros, cpufreq_governor_{init,exit}(), to factorize the code.
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Quentin Perret <qperret@google.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
[ rjw: Changelog ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The locking around governors handling isn't adequate currently.
The list of governors should never be traversed without the locking
in place. Also governor modules must not be removed while the code
in them is still in use.
Reported-by: Quentin Perret <qperret@google.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Cc: All applicable <stable@vger.kernel.org>
[ rjw: Changelog ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Currently using attribute "energy_performance_preference", user space can
write one of the four per-defined preference string. These preference
strings gets mapped to a hard-coded Energy-Performance Preference (EPP) or
Energy-Performance Bias (EPB) knob.
These four values are supposed to cover broad spectrum of use cases, but
are not uniformly distributed in the range. There are number of cases,
where this is not enough. For example:
Suppose user wants more performance when connected to AC. Instead of using
default "balance performance", the "performance" setting can be used. This
changes EPP value from 0x80 to 0x00. But setting EPP to 0, results in
electrical and thermal issues on some platforms. This results in
aggressive throttling, which causes a drop in performance. But some value
between 0x80 and 0x00 results in better performance. But that value can't
be fixed as the power curve is not linear. In some cases just changing EPP
from 0x80 to 0x75 is enough to get significant performance gain.
Similarly on battery the default "balance_performance" mode can be
aggressive in power consumption. But picking up the next choice
"balance power" results in too much loss of performance, which results in
bad user experience in use cases like "Google Hangout". It was observed
that some value between these two EPP is optimal.
This change allows fine grain EPP tuning for platform like Chromebook or
for users who wants to fine tune power and performance.
Here based on the product and use cases, different EPP values can be set.
This change is similar to the change done for:
/sys/devices/system/cpu/cpu*/power/energy_perf_bias
where user has choice to write a predefined string or raw value.
The change itself is trivial. When user preference doesn't match
predefined string preferences and value is an unsigned integer and in
range, use that value for EPP. When the EPP feature is not present
writing raw value is not supported.
Suggested-by: Len Brown <lenb@kernel.org>
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
By default intel_pstate the driver disables energy efficiency by setting
MSR_IA32_POWER_CTL bit 19 for Kaby Lake desktop CPU model in HWP mode.
This CPU model is also shared by Coffee Lake desktop CPUs. This allows
these systems to reach maximum possible frequency. But this adds power
penalty, which some customers don't want. They want some way to enable/
disable dynamically.
So, add an additional attribute "energy_efficiency" under
/sys/devices/system/cpu/intel_pstate/ for these CPU models. This allows
to read and write bit 19 ("Disable Energy Efficiency Optimization") in
the MSR IA32_POWER_CTL.
This attribute is present in both HWP and non-HWP mode as this has an
effect in both modes. Refer to Intel Software Developer's manual for
details.
The scope of this bit is package wide. Also these systems are single
package systems. So read/write MSR on the current CPU is enough.
The energy efficiency (EE) bit setting needs to be preserved during
suspend/resume and CPU offline/online operation. To do this:
- Restoring the EE setting from the cpufreq resume() callback, if there
is change from the system default.
- By default, don't disable EE from cpufreq init() callback for matching
CPU models. Since the scope is package wide and is a single package
system, move the disable EE calls from init() callback to
intel_pstate_init() function, which is called only once.
Suggested-by: Len Brown <lenb@kernel.org>
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The unicore32 port is removed from the kernel.
There is no point to keep stale cpufreq driver for this architecture.
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Currently the fast_switch_possible flag is set unconditionally to true.
Based on this, schedutil does not create a thread for frequency
switching and would always use the fast switch path.
However, if the platform does not support SCMI fast channel, we use
polling mode for SCMI message transfer. This may be possible only if
there is dedicated channel for DVFS and all operations are in polling
mode.
Update this by retrieving the fast_switch capability based on the
presence of fast channels in SCMI platform firmware.
Link: https://lore.kernel.org/r/20200617094332.8391-2-nicola.mazzucato@arm.com
Suggested-by: Lukasz Luba <lukasz.luba@arm.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Nicola Mazzucato <nicola.mazzucato@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
The Energy Model framework supports not only CPU devices. Drop the CPU
specific interface with cpumask and add struct device. Add also a return
value, user might use it. This new interface provides easy way to create
a simple Energy Model, which then might be used by e.g. thermal subsystem.
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Lukasz Luba <lukasz.luba@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The Energy Model framework is going to support devices other that CPUs. In
order to make this happen change the callback function and add pointer to
a device as an argument.
Update the related users to use new function and new callback from the
Energy Model.
Acked-by: Quentin Perret <qperret@google.com>
Signed-off-by: Lukasz Luba <lukasz.luba@arm.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Add one more bit for OOB (Out Of Band) enabling of P-states.
If OOB handling of P-states is enabled, intel_pstate shouldn't load.
Currently, only "BIT(8) == 1" of the MSR MSR_MISC_PWR_MGMT is
considered as OOB, but "BIT(18) == 1" needs to be taken into
consideration as OOB condition too.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
[ rjw: Add an empty code line, edit subject and changelog ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Add SC7180 to cpufreq-dt-platdev blacklist since the actual scaling is
handled by the 'qcom-cpufreq-hw' driver.
Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Add SDM845 to cpufreq-dt-platdev blacklist since the actual scaling is
handled by the 'qcom-cpufreq-hw' driver.
Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Since commit 84af7a6194 ("checkpatch: kconfig: prefer 'help' over
'---help---'"), the number of '---help---' has been gradually
decreasing, but there are still more than 2400 instances.
This commit finishes the conversion. While I touched the lines,
I also fixed the indentation.
There are a variety of indentation styles found.
a) 4 spaces + '---help---'
b) 7 spaces + '---help---'
c) 8 spaces + '---help---'
d) 1 space + 1 tab + '---help---'
e) 1 tab + '---help---' (correct indentation)
f) 1 tab + 1 space + '---help---'
g) 1 tab + 2 spaces + '---help---'
In order to convert all of them to 1 tab + 'help', I ran the
following commend:
$ find . -name 'Kconfig*' | xargs sed -i 's/^[[:space:]]*---help---/\thelp/'
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
- Add support for interconnect bandwidth to the OPP core (Georgi
Djakov, Saravana Kannan, Sibi Sankar, Viresh Kumar).
- Add support for regulator enable/disable to the OPP core (Kamil
Konieczny).
- Add boost support to the CPPC cpufreq driver (Xiongfeng Wang).
- Make the tegra186 cpufreq driver set the
CPUFREQ_NEED_INITIAL_FREQ_CHECK flag (Mian Yousaf Kaukab).
- Prevent the ACPI power management from using power resources
with devices where the list of power resources for power state
D0 (full power) is missing (Rafael Wysocki).
- Annotate a hibernation-related function with __init (Christophe
JAILLET).
-----BEGIN PGP SIGNATURE-----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=p5eu
-----END PGP SIGNATURE-----
Merge tag 'pm-5.8-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more power management updates from Rafael Wysocki:
"These are operating performance points (OPP) framework updates mostly,
including support for interconnect bandwidth in the OPP core, plus a
few cpufreq changes, including boost support in the CPPC cpufreq
driver, an ACPI device power management fix and a hibernation code
cleanup.
Specifics:
- Add support for interconnect bandwidth to the OPP core (Georgi
Djakov, Saravana Kannan, Sibi Sankar, Viresh Kumar).
- Add support for regulator enable/disable to the OPP core (Kamil
Konieczny).
- Add boost support to the CPPC cpufreq driver (Xiongfeng Wang).
- Make the tegra186 cpufreq driver set the
CPUFREQ_NEED_INITIAL_FREQ_CHECK flag (Mian Yousaf Kaukab).
- Prevent the ACPI power management from using power resources with
devices where the list of power resources for power state D0 (full
power) is missing (Rafael Wysocki).
- Annotate a hibernation-related function with __init (Christophe
JAILLET)"
* tag 'pm-5.8-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: PM: Avoid using power resources if there are none for D0
cpufreq: CPPC: add SW BOOST support
cpufreq: change '.set_boost' to act on one policy
PM: hibernate: Add __init annotation to swsusp_header_init()
opp: Don't parse icc paths unnecessarily
opp: Remove bandwidth votes when target_freq is zero
opp: core: add regulators enable and disable
opp: Reorder the code for !target_freq case
opp: Expose bandwidth information via debugfs
cpufreq: dt: Add support for interconnect bandwidth scaling
opp: Update the bandwidth on OPP frequency changes
opp: Add sanity checks in _read_opp_key()
opp: Add support for parsing interconnect bandwidth
cpufreq: tegra186: add CPUFREQ_NEED_INITIAL_FREQ_CHECK flag
OPP: Add helpers for reading the binding properties
dt-bindings: opp: Introduce opp-peak-kBps and opp-avg-kBps bindings
* pm-cpufreq:
cpufreq: CPPC: add SW BOOST support
cpufreq: change '.set_boost' to act on one policy
cpufreq: tegra186: add CPUFREQ_NEED_INITIAL_FREQ_CHECK flag
* pm-acpi:
ACPI: PM: Avoid using power resources if there are none for D0
* pm-opp:
opp: Don't parse icc paths unnecessarily
opp: Remove bandwidth votes when target_freq is zero
opp: core: add regulators enable and disable
opp: Reorder the code for !target_freq case
opp: Expose bandwidth information via debugfs
cpufreq: dt: Add support for interconnect bandwidth scaling
opp: Update the bandwidth on OPP frequency changes
opp: Add sanity checks in _read_opp_key()
opp: Add support for parsing interconnect bandwidth
interconnect: Remove unused module exit code from core
interconnect: Disallow interconnect core to be built as a module
interconnect: Add of_icc_get_by_index() helper function
OPP: Add helpers for reading the binding properties
dt-bindings: opp: Introduce opp-peak-kBps and opp-avg-kBps bindings
To add SW BOOST support for CPPC, we need to get the max frequency of
boost mode and non-boost mode. ACPI spec 6.2 section 8.4.7.1 describes
the following two CPC registers.
"Highest performance is the absolute maximum performance an individual
processor may reach, assuming ideal conditions. This performance level
may not be sustainable for long durations, and may only be achievable if
other platform components are in a specific state; for example, it may
require other processors be in an idle state.
Nominal Performance is the maximum sustained performance level of the
processor, assuming ideal operating conditions. In absence of an
external constraint (power, thermal, etc.) this is the performance level
the platform is expected to be able to maintain continuously. All
processors are expected to be able to sustain their nominal performance
state simultaneously."
To add SW BOOST support for CPPC, we can use Highest Performance as the
max performance in boost mode and Nominal Performance as the max
performance in non-boost mode. If the Highest Performance is greater
than the Nominal Performance, we assume SW BOOST is supported.
The current CPPC driver does not support SW BOOST and use 'Highest
Performance' as the max performance the CPU can achieve. 'Nominal
Performance' is used to convert 'performance' to 'frequency'. That
means, if firmware enable boost and provide a value for Highest
Performance which is greater than Nominal Performance, boost feature is
enabled by default.
Because SW BOOST is disabled by default, so, after this patch, boost
feature is disabled by default even if boost is enabled by firmware.
Signed-off-by: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Suggested-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
[ rjw: Subject ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Macro 'for_each_active_policy()' is defined internally. To avoid some
cpufreq driver needing this macro to iterate over all the policies in
'.set_boost' callback, we redefine '.set_boost' to act on only one
policy and pass the policy as an argument.
'cpufreq_boost_trigger_state()' iterates over all the policies to set
boost for the system.
This is preparation for adding SW BOOST support for CPPC.
To protect Boost enable/disable by sysfs from CPU online/offline,
add 'cpu_hotplug_lock' before calling '.set_boost' for each CPU.
Also move the lock from 'set_boost()' to 'store_cpb()' in
acpi_cpufreq.
Signed-off-by: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Suggested-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
[ rjw: Subject & changelog ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
These are updates to SoC specific drivers that did not have
another subsystem maintainer tree to go through for some
reason:
- Some bus and memory drivers for the MIPS P5600 based
Baikal-T1 SoC that is getting added through the MIPS tree.
- There are new soc_device identification drivers for TI K3,
Qualcomm MSM8939
- New reset controller drivers for NXP i.MX8MP, Renesas
RZ/G1H, and Hisilicon hi6220
- The SCMI firmware interface can now work across ARM SMC/HVC
as a transport.
- Mediatek platforms now use a new driver for their "MMSYS"
hardware block that controls clocks and some other aspects
in behalf of the media and gpu drivers.
- Some Tegra processors have improved power management
support, including getting woken up by the PMIC and cluster
power down during idle.
- A new v4l staging driver for Tegra is added.
- Cleanups and minor bugfixes for TI, NXP, Hisilicon,
Mediatek, and Tegra.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----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=44Jc
-----END PGP SIGNATURE-----
Merge tag 'arm-drivers-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM/SoC driver updates from Arnd Bergmann:
"These are updates to SoC specific drivers that did not have another
subsystem maintainer tree to go through for some reason:
- Some bus and memory drivers for the MIPS P5600 based Baikal-T1 SoC
that is getting added through the MIPS tree.
- There are new soc_device identification drivers for TI K3, Qualcomm
MSM8939
- New reset controller drivers for NXP i.MX8MP, Renesas RZ/G1H, and
Hisilicon hi6220
- The SCMI firmware interface can now work across ARM SMC/HVC as a
transport.
- Mediatek platforms now use a new driver for their "MMSYS" hardware
block that controls clocks and some other aspects in behalf of the
media and gpu drivers.
- Some Tegra processors have improved power management support,
including getting woken up by the PMIC and cluster power down
during idle.
- A new v4l staging driver for Tegra is added.
- Cleanups and minor bugfixes for TI, NXP, Hisilicon, Mediatek, and
Tegra"
* tag 'arm-drivers-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (155 commits)
clk: sprd: fix compile-testing
bus: bt1-axi: Build the driver into the kernel
bus: bt1-apb: Build the driver into the kernel
bus: bt1-axi: Use sysfs_streq instead of strncmp
bus: bt1-axi: Optimize the return points in the driver
bus: bt1-apb: Use sysfs_streq instead of strncmp
bus: bt1-apb: Use PTR_ERR_OR_ZERO to return from request-regs method
bus: bt1-apb: Fix show/store callback identations
bus: bt1-apb: Include linux/io.h
dt-bindings: memory: Add Baikal-T1 L2-cache Control Block binding
memory: Add Baikal-T1 L2-cache Control Block driver
bus: Add Baikal-T1 APB-bus driver
bus: Add Baikal-T1 AXI-bus driver
dt-bindings: bus: Add Baikal-T1 APB-bus binding
dt-bindings: bus: Add Baikal-T1 AXI-bus binding
staging: tegra-video: fix V4L2 dependency
tee: fix crypto select
drivers: soc: ti: knav_qmss_queue: Make knav_gp_range_ops static
soc: ti: add k3 platforms chipid module driver
dt-bindings: soc: ti: add binding for k3 platforms chipid module
...
- added support for MIPSr5 and P5600 cores
- converted Loongson PCI driver into a PCI host driver using the generic
PCI framework
- added emulation of CPUCFG command for Loogonson64 cpus
- removed of LASAT, PMC MSP71xx and NEC MARKEINS/EMMA
- ioremap cleanup
- fix for a race between two threads faulting the same page
- various cleanups and fixes
-----BEGIN PGP SIGNATURE-----
iQJOBAABCAA4FiEEbt46xwy6kEcDOXoUeZbBVTGwZHAFAl7WK54aHHRzYm9nZW5k
QGFscGhhLmZyYW5rZW4uZGUACgkQeZbBVTGwZHAbjA/9EEFeqNg9UNUH6/TS18QV
qkxKp0+LC4Jk+SduzLyYsYy6l/dSaKYl8m9jyJsWjM6BvBZTcMJJOnzIPRafI0s+
MK8GCSZunAkm25DsDvfobQUkbQ/UHjY/fuRpNslbDcsYqIKv90hUMd21ccXY6KC5
RY+aMlpjgksg1X8JJ7k1Rs05sXyUPqpESteyqehF1b/+Iyv7H2L3v5EvQwvPDs6f
TyVgNJU2B3RCU6/uAcWmHdVLxXd+Y8fM0vC8DCO0pg0rGf4be0FbZztHmeq6r2wy
g7wsO7acKWGzulFQD5ftVSQ6i8KHIDNDePmDMtU5oFcXkzUDdGvd3j3Gst19/nve
ZftNmQHOY1JqGUOhdq1fDG/4M3Vc5bvh3W6eMG22TuMLEWsOF8teY8uUa/vxOb+B
2NsJ9q6ylRS7RDWWOrApJWfFYPvhr5wlLxT+azWNa9y3bjV8vDLjNdU0mRLA1nsu
yLzYMwIhtWfZhkJZ+xJVSmQ6LjAHDN5TF/LEx/9itLg5t9wrEosFPAtOv8V15hy4
KBNvvWeoy7RRmBTNuKh7r9Ui4jw7GgxL4D1OwzCsF//GAiGyuuh0zMuUE8EXA6K5
MpdGt+bSOcLl8ILTtGir8e4MXLawDH8n94f8QWLb9FcOvU4KHUjRKU7EQ6dyD5dk
a7xskGLXWdVO3IJ/Xvxcaeo=
=eAtN
-----END PGP SIGNATURE-----
Merge tag 'mips_5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux
Pull MIPS updates from Thomas Bogendoerfer:
- added support for MIPSr5 and P5600 cores
- converted Loongson PCI driver into a PCI host driver using the
generic PCI framework
- added emulation of CPUCFG command for Loogonson64 cpus
- removed of LASAT, PMC MSP71xx and NEC MARKEINS/EMMA
- ioremap cleanup
- fix for a race between two threads faulting the same page
- various cleanups and fixes
* tag 'mips_5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (143 commits)
MIPS: ralink: drop ralink_clk_init for mt7621
MIPS: ralink: bootrom: mark a function as __init to save some memory
MIPS: Loongson64: Reorder CPUCFG model match arms
MIPS: Expose Loongson CPUCFG availability via HWCAP
MIPS: Loongson64: Guard against future cores without CPUCFG
MIPS: Fix build warning about "PTR_STR" redefinition
MIPS: Loongson64: Remove not used pci.c
MIPS: Loongson64: Define PCI_IOBASE
MIPS: CPU_LOONGSON2EF need software to maintain cache consistency
MIPS: DTS: Fix build errors used with various configs
MIPS: Loongson64: select NO_EXCEPT_FILL
MIPS: Fix IRQ tracing when call handle_fpe() and handle_msa_fpe()
MIPS: mm: add page valid judgement in function pte_modify
mm/memory.c: Add memory read privilege on page fault handling
mm/memory.c: Update local TLB if PTE entry exists
MIPS: Do not flush tlb page when updating PTE entry
MIPS: ingenic: Default to a generic board
MIPS: ingenic: Add support for GCW Zero prototype
MIPS: ingenic: DTS: Add memory info of GCW Zero
MIPS: Loongson64: Switch to generic PCI driver
...
Pull ARM cpufreq updates for v5.8-rc1 (part 2) from Viresh Kumar:
"This contains a single patch to enable CPUFREQ_NEED_INITIAL_FREQ_CHECK
flag for tegra driver."
* 'cpufreq/arm/linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm:
cpufreq: tegra186: add CPUFREQ_NEED_INITIAL_FREQ_CHECK flag
Pull operating performance points (OPP) framework changes for v5.8
from Viresh Kumar:
"This contains:
- support for interconnect bandwidth in the OPP core (Georgi Djakov,
Saravana Kannan, Sibi Sankar, Viresh Kumar).
- support for regulator enable/disable (Kamil Konieczny).
This is based on three patches from the interconnect tree which
shall get merged via Greg's tree."
* 'opp/linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm:
opp: Don't parse icc paths unnecessarily
opp: Remove bandwidth votes when target_freq is zero
opp: core: add regulators enable and disable
opp: Reorder the code for !target_freq case
opp: Expose bandwidth information via debugfs
cpufreq: dt: Add support for interconnect bandwidth scaling
opp: Update the bandwidth on OPP frequency changes
opp: Add sanity checks in _read_opp_key()
opp: Add support for parsing interconnect bandwidth
interconnect: Remove unused module exit code from core
interconnect: Disallow interconnect core to be built as a module
interconnect: Add of_icc_get_by_index() helper function
OPP: Add helpers for reading the binding properties
dt-bindings: opp: Introduce opp-peak-kBps and opp-avg-kBps bindings
In addition to clocks and regulators, some devices can scale the bandwidth
of their on-chip interconnect - for example between CPU and DDR memory. Add
support for that, so that platforms which support it can make use of it.
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
[ Viresh: Reused dev_pm_opp_of_find_icc_paths(). Also drop the depends
on from Kconfig. ]
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
fixup! cpufreq: dt: Add support for interconnect bandwidth scaling
This change move Tegra20 and Tegra30 to the generic DT CPU frequency
scaling driver.
-----BEGIN PGP SIGNATURE-----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=ru90
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-5.8-cpufreq' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/drivers
cpufreq: Changes for v5.8-rc1
This change move Tegra20 and Tegra30 to the generic DT CPU frequency
scaling driver.
* tag 'tegra-for-5.8-cpufreq' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
cpufreq: tegra20: Use generic cpufreq-dt driver (Tegra30 supported now)
Link: https://lore.kernel.org/r/20200515145311.1580134-2-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
After commit 18c49926c4 ("cpufreq: Add QoS requests for userspace
constraints") the return value of freq_qos_update_request(), that can
be 1, passed by cpufreq_boost_set_sw() to its caller sometimes
confuses the latter, which only expects to see 0 or negative error
codes, so notice that cpufreq_boost_set_sw() can return an error code
(which should not be -EINVAL for that matter) as soon as the first
policy without a frequency table is found (because either all policies
have a frequency table or none of them have it) and rework it to meet
its caller's expectations.
Fixes: 18c49926c4 ("cpufreq: Add QoS requests for userspace constraints")
Reported-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Reported-by: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Cc: 5.3+ <stable@vger.kernel.org> # 5.3+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The driver doesn't provide ->get() method to read current frequency and
the frequency is set to 0 at initialization which makes the driver fail
at initialization time.
Set the CPUFREQ_NEED_INITIAL_FREQ_CHECK flag for the driver, so the
cpufreq core checks for the unlisted frequency and sets the CPU to a
valid frequency from the frequency table.
Signed-off-by: Mian Yousaf Kaukab <ykaukab@suse.de>
[ Viresh: Massaged change log ]
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Pull ARM cpufreq updates for v5.8 from Viresh Kumar:
"- Build OMAP cpufreq driver by default for ARCH_OMAP2PLUS platform
(Anders Roxell).
- Fix compatible bindings for qcom cpufreq driver (Ansuel Smith).
- Update qoriq cpufreq driver to automatically loaded when built as
module and related changes (Mian Yousaf Kaukab and Geert
Uytterhoeven).
- Add support for r8a7742 to cpufreq-dt platform driver (Lad
Prabhakar).
- Add support for i.MX7ULP to imx cpufreq driver (Peng Fan)."
* 'cpufreq/arm/linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm:
cpufreq: qoriq: Add platform dependencies
clk: qoriq: add cpufreq platform device
cpufreq: qoriq: convert to a platform driver
cpufreq: qcom: fix wrong compatible binding
cpufreq: imx-cpufreq-dt: support i.MX7ULP
cpufreq: dt: Add support for r8a7742
cpufreq: Add i.MX7ULP to cpufreq-dt-platdev blacklist
cpufreq: omap: Build driver by default for ARCH_OMAP2PLUS
The Freescale QorIQ clock controller is only present on Freescale E500MC
and Layerscape SoCs. Add platform dependencies to the QORIQ_CPUFREQ
config symbol, to avoid asking the user about it when configuring a
kernel without E500MC or Layerscape support.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
The driver has to be manually loaded if it is built as a module. It
is neither exporting MODULE_DEVICE_TABLE nor MODULE_ALIAS. Moreover,
no platform-device is created (and thus no uevent is sent) for the
clockgen nodes it depends on.
Convert the module to a platform driver with its own alias. Moreover,
drop whitelisted SOCs. Platform device will be created only for the
compatible platforms.
Reviewed-by: Yuantian Tang <andy.tang@nxp.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Mian Yousaf Kaukab <ykaukab@suse.de>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Re-parenting to intermediate clock is supported now by the clock driver
and thus there is no need in a customized CPUFreq driver, all that code
is common for both Tegra20 and Tegra30. The available CPU freqs are now
specified in device-tree in a form of OPPs, all users should update their
device-trees.
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Peter De Schrijver <pdeschrijver@nvidia.com>
Tested-by: Peter Geis <pgwipeout@gmail.com>
Tested-by: Marcel Ziswiler <marcel@ziswiler.com>
Tested-by: Jasper Korten <jja2000@gmail.com>
Tested-by: David Heidelberg <david@ixit.cz>
Tested-by: Nicolas Chauvet <kwizart@gmail.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Binding in Documentation is still "operating-points-v2-kryo-cpu".
Restore the old binding to fix the compatibility problem.
Fixes: a8811ec764 ("cpufreq: qcom: Add support for krait based socs")
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
i.MX7ULP's ARM core clock design is totally different compared
with i.MX7D/8M SoCs which supported by imx-cpufreq-dt. It needs
get_intermediate and target_intermedate to configure clk MUX ready,
before let OPP configure ARM core clk.
|---FIRC
|------RUN---...---SCS(MUX2) --------|
ARM --(MUX1) |---SPLL_PFD0(CLK_SET_RATE_GATE)
|------HSRUN--...--HSRUN_SCS(MUX3)---|
|---SRIC
FIRC is step clk, SPLL_PFD0 is the normal clk driving ARM core.
MUX2 and MUX3 share same inputs. So if MUX2/MUX3 both sources from
SPLL_PFD0, both MUXes will lose input when configure SPLL_PFD0.
So the target_intermediate will configure MUX2/MUX3 to FIRC, to avoid
ARM core lose clk when configure SPLL_PFD0.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
When building the mult_v7_defconfig, ARM_TI_CPUFREQ doesn't get enabled
evenwhen ARCH_OMAP(3|4) is selected. Build ARM_TI_CPUFREQ by default for
ARCH_OMAP2PLUS.
Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Make a note of the first time we discover the turbo mode has been
disabled by the BIOS, as otherwise we complain every time we try to
update the mode.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
After recent changes allowing scale-invariant utilization to be
used on x86, the schedutil governor on top of intel_pstate in the
passive mode should be on par with (or better than) the active mode
"powersave" algorithm of intel_pstate on systems in which
hardware-managed P-states (HWP) are not used, so it should not be
necessary to use the internal scaling algorithm in those cases.
Accordingly, modify intel_pstate to start in the passive mode by
default if the processor at hand does not support HWP of if the driver
is requested to avoid using HWP through the kernel command line.
Among other things, that will allow utilization clamps and the
support for RT/DL tasks in the schedutil governor to be utilized on
systems in which intel_pstate is used.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
As platforms are moving to COMMON_CLK in general, loongson2ef
stuck out as something that has a private implementation but
does not actually use it except for setting the frequency of
the CPU itself from the loongson2_cpufreq driver.
Change that driver to call the register setting function directly
and remove the rest of the stub implementation.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
- Fix corner-case suspend-to-idle wakeup issue on systems where
the ACPI SCI is shared with another wakeup source (Hans de Goede).
- Add document describing system-wide suspend and resume code flows
to the admin guide (Rafael Wysocki).
- Add kernel command line option to set pm_debug_messages (Chen Yu).
- Choose schedutil as the preferred scaling governor by default on
ARM big.LITTLE systems and on x86 systems using the intel_pstate
driver in the passive mode (Linus Walleij, Rafael Wysocki).
- Drop racy and redundant checks from the PM core's device_prepare()
routine (Rafael Wysocki).
- Make resume from hibernation take the hibernation_restore() return
value into account (Dexuan Cui).
-----BEGIN PGP SIGNATURE-----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=QFDr
-----END PGP SIGNATURE-----
Merge tag 'pm-5.7-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more power management updates from Rafael Wysocki:
"Additional power management updates.
These fix a corner-case suspend-to-idle wakeup issue on systems where
the ACPI SCI is shared with another wakeup source, add a kernel
command line option to set pm_debug_messages via the kernel command
line, add a document desctibing system-wide suspend and resume code
flows, modify cpufreq Kconfig to choose schedutil as the preferred
governor by default in a couple of cases and do some assorted
cleanups.
Specifics:
- Fix corner-case suspend-to-idle wakeup issue on systems where the
ACPI SCI is shared with another wakeup source (Hans de Goede).
- Add document describing system-wide suspend and resume code flows
to the admin guide (Rafael Wysocki).
- Add kernel command line option to set pm_debug_messages (Chen Yu).
- Choose schedutil as the preferred scaling governor by default on
ARM big.LITTLE systems and on x86 systems using the intel_pstate
driver in the passive mode (Linus Walleij, Rafael Wysocki).
- Drop racy and redundant checks from the PM core's device_prepare()
routine (Rafael Wysocki).
- Make resume from hibernation take the hibernation_restore() return
value into account (Dexuan Cui)"
* tag 'pm-5.7-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
platform/x86: intel_int0002_vgpio: Use acpi_register_wakeup_handler()
ACPI: PM: Add acpi_[un]register_wakeup_handler()
Documentation: PM: sleep: Document system-wide suspend code flows
cpufreq: Select schedutil when using big.LITTLE
PM: sleep: Add pm_debug_messages kernel command line option
PM: sleep: core: Drop racy and redundant checks from device_prepare()
PM: hibernate: Propagate the return value of hibernation_restore()
cpufreq: intel_pstate: Select schedutil as the default governor
* pm-sleep:
Documentation: PM: sleep: Document system-wide suspend code flows
PM: sleep: Add pm_debug_messages kernel command line option
PM: sleep: core: Drop racy and redundant checks from device_prepare()
PM: hibernate: Propagate the return value of hibernation_restore()
* pm-cpufreq:
cpufreq: Select schedutil when using big.LITTLE
cpufreq: intel_pstate: Select schedutil as the default governor
- A large series from Nick for 64-bit to further rework our exception vectors,
and rewrite portions of the syscall entry/exit and interrupt return in C. The
result is much easier to follow code that is also faster in general.
- Cleanup of our ptrace code to split various parts out that had become badly
intertwined with #ifdefs over the years.
- Changes to our NUMA setup under the PowerVM hypervisor which should
hopefully avoid non-sensical topologies which can lead to warnings from the
workqueue code and other problems.
- MAINTAINERS updates to remove some of our old orphan entries and update the
status of others.
- Quite a few other small changes and fixes all over the map.
Thanks to:
Abdul Haleem, afzal mohammed, Alexey Kardashevskiy, Andrew Donnellan, Aneesh
Kumar K.V, Balamuruhan S, Cédric Le Goater, Chen Zhou, Christophe JAILLET,
Christophe Leroy, Christoph Hellwig, Clement Courbet, Daniel Axtens, David
Gibson, Douglas Miller, Fabiano Rosas, Fangrui Song, Ganesh Goudar, Gautham R.
Shenoy, Greg Kroah-Hartman, Greg Kurz, Gustavo Luiz Duarte, Hari Bathini, Ilie
Halip, Jan Kara, Joe Lawrence, Joe Perches, Kajol Jain, Larry Finger,
Laurentiu Tudor, Leonardo Bras, Libor Pechacek, Madhavan Srinivasan, Mahesh
Salgaonkar, Masahiro Yamada, Masami Hiramatsu, Mauricio Faria de Oliveira,
Michael Neuling, Michal Suchanek, Mike Rapoport, Nageswara R Sastry, Nathan
Chancellor, Nathan Lynch, Naveen N. Rao, Nicholas Piggin, Nick Desaulniers,
Oliver O'Halloran, Po-Hsu Lin, Pratik Rajesh Sampat, Rasmus Villemoes, Ravi
Bangoria, Roman Bolshakov, Sam Bobroff, Sandipan Das, Santosh S, Sedat Dilek,
Segher Boessenkool, Shilpasri G Bhat, Sourabh Jain, Srikar Dronamraju, Stephen
Rothwell, Tyrel Datwyler, Vaibhav Jain, YueHaibing.
-----BEGIN PGP SIGNATURE-----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=ARdm
-----END PGP SIGNATURE-----
Merge tag 'powerpc-5.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
"Slightly late as I had to rebase mid-week to insert a bug fix:
- A large series from Nick for 64-bit to further rework our exception
vectors, and rewrite portions of the syscall entry/exit and
interrupt return in C. The result is much easier to follow code
that is also faster in general.
- Cleanup of our ptrace code to split various parts out that had
become badly intertwined with #ifdefs over the years.
- Changes to our NUMA setup under the PowerVM hypervisor which should
hopefully avoid non-sensical topologies which can lead to warnings
from the workqueue code and other problems.
- MAINTAINERS updates to remove some of our old orphan entries and
update the status of others.
- Quite a few other small changes and fixes all over the map.
Thanks to: Abdul Haleem, afzal mohammed, Alexey Kardashevskiy, Andrew
Donnellan, Aneesh Kumar K.V, Balamuruhan S, Cédric Le Goater, Chen
Zhou, Christophe JAILLET, Christophe Leroy, Christoph Hellwig, Clement
Courbet, Daniel Axtens, David Gibson, Douglas Miller, Fabiano Rosas,
Fangrui Song, Ganesh Goudar, Gautham R. Shenoy, Greg Kroah-Hartman,
Greg Kurz, Gustavo Luiz Duarte, Hari Bathini, Ilie Halip, Jan Kara,
Joe Lawrence, Joe Perches, Kajol Jain, Larry Finger, Laurentiu Tudor,
Leonardo Bras, Libor Pechacek, Madhavan Srinivasan, Mahesh Salgaonkar,
Masahiro Yamada, Masami Hiramatsu, Mauricio Faria de Oliveira, Michael
Neuling, Michal Suchanek, Mike Rapoport, Nageswara R Sastry, Nathan
Chancellor, Nathan Lynch, Naveen N. Rao, Nicholas Piggin, Nick
Desaulniers, Oliver O'Halloran, Po-Hsu Lin, Pratik Rajesh Sampat,
Rasmus Villemoes, Ravi Bangoria, Roman Bolshakov, Sam Bobroff,
Sandipan Das, Santosh S, Sedat Dilek, Segher Boessenkool, Shilpasri G
Bhat, Sourabh Jain, Srikar Dronamraju, Stephen Rothwell, Tyrel
Datwyler, Vaibhav Jain, YueHaibing"
* tag 'powerpc-5.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (158 commits)
powerpc: Make setjmp/longjmp signature standard
powerpc/cputable: Remove unnecessary copy of cpu_spec->oprofile_type
powerpc: Suppress .eh_frame generation
powerpc: Drop -fno-dwarf2-cfi-asm
powerpc/32: drop unused ISA_DMA_THRESHOLD
powerpc/powernv: Add documentation for the opal sensor_groups sysfs interfaces
selftests/powerpc: Fix try-run when source tree is not writable
powerpc/vmlinux.lds: Explicitly retain .gnu.hash
powerpc/ptrace: move ptrace_triggered() into hw_breakpoint.c
powerpc/ptrace: create ppc_gethwdinfo()
powerpc/ptrace: create ptrace_get_debugreg()
powerpc/ptrace: split out ADV_DEBUG_REGS related functions.
powerpc/ptrace: move register viewing functions out of ptrace.c
powerpc/ptrace: split out TRANSACTIONAL_MEM related functions.
powerpc/ptrace: split out SPE related functions.
powerpc/ptrace: split out ALTIVEC related functions.
powerpc/ptrace: split out VSX related functions.
powerpc/ptrace: drop PARAMETER_SAVE_AREA_OFFSET
powerpc/ptrace: drop unnecessary #ifdefs CONFIG_PPC64
powerpc/ptrace: remove unused header includes
...
When we are using a system with big.LITTLE HMP
configuration, we need to use EAS to schedule the
system.
As can be seen from kernel/sched/topology.c:
"EAS can be used on a root domain if it meets all the following conditions:
1. an Energy Model (EM) is available;
2. the SD_ASYM_CPUCAPACITY flag is set in the sched_domain hierarchy.
3. no SMT is detected.
4. the EM complexity is low enough to keep scheduling overheads low;
5. schedutil is driving the frequency of all CPUs of the rd;"
This means that at the very least, schedutil needs to be
available as a scheduling policy for EAS to work on these
systems. Make this explicit by defaulting to the schedutil
governor if BIG_LITTLE is selected.
Currently users of the TC2 board (like me) has to figure these
dependencies out themselves and it is not helpful.
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
- In-kernel Pointer Authentication support (previously only offered to
user space).
- ARM Activity Monitors (AMU) extension support allowing better CPU
utilisation numbers for the scheduler (frequency invariance).
- Memory hot-remove support for arm64.
- Lots of asm annotations (SYM_*) in preparation for the in-kernel
Branch Target Identification (BTI) support.
- arm64 perf updates: ARMv8.5-PMU 64-bit counters, refactoring the PMU
init callbacks, support for new DT compatibles.
- IPv6 header checksum optimisation.
- Fixes: SDEI (software delegated exception interface) double-lock on
hibernate with shared events.
- Minor clean-ups and refactoring: cpu_ops accessor, cpu_do_switch_mm()
converted to C, cpufeature finalisation helper.
- sys_mremap() comment explaining the asymmetric address untagging
behaviour.
-----BEGIN PGP SIGNATURE-----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=LJVX
-----END PGP SIGNATURE-----
Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Catalin Marinas:
"The bulk is in-kernel pointer authentication, activity monitors and
lots of asm symbol annotations. I also queued the sys_mremap() patch
commenting the asymmetry in the address untagging.
Summary:
- In-kernel Pointer Authentication support (previously only offered
to user space).
- ARM Activity Monitors (AMU) extension support allowing better CPU
utilisation numbers for the scheduler (frequency invariance).
- Memory hot-remove support for arm64.
- Lots of asm annotations (SYM_*) in preparation for the in-kernel
Branch Target Identification (BTI) support.
- arm64 perf updates: ARMv8.5-PMU 64-bit counters, refactoring the
PMU init callbacks, support for new DT compatibles.
- IPv6 header checksum optimisation.
- Fixes: SDEI (software delegated exception interface) double-lock on
hibernate with shared events.
- Minor clean-ups and refactoring: cpu_ops accessor,
cpu_do_switch_mm() converted to C, cpufeature finalisation helper.
- sys_mremap() comment explaining the asymmetric address untagging
behaviour"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (81 commits)
mm/mremap: Add comment explaining the untagging behaviour of mremap()
arm64: head: Convert install_el2_stub to SYM_INNER_LABEL
arm64: Introduce get_cpu_ops() helper function
arm64: Rename cpu_read_ops() to init_cpu_ops()
arm64: Declare ACPI parking protocol CPU operation if needed
arm64: move kimage_vaddr to .rodata
arm64: use mov_q instead of literal ldr
arm64: Kconfig: verify binutils support for ARM64_PTR_AUTH
lkdtm: arm64: test kernel pointer authentication
arm64: compile the kernel with ptrauth return address signing
kconfig: Add support for 'as-option'
arm64: suspend: restore the kernel ptrauth keys
arm64: __show_regs: strip PAC from lr in printk
arm64: unwind: strip PAC from kernel addresses
arm64: mask PAC bits of __builtin_return_address
arm64: initialize ptrauth keys for kernel booting task
arm64: initialize and switch ptrauth kernel keys
arm64: enable ptrauth earlier
arm64: cpufeature: handle conflicts based on capability
arm64: cpufeature: Move cpu capability helpers inside C file
...
Pull scheduler updates from Ingo Molnar:
"The main changes in this cycle are:
- Various NUMA scheduling updates: harmonize the load-balancer and
NUMA placement logic to not work against each other. The intended
result is better locality, better utilization and fewer migrations.
- Introduce Thermal Pressure tracking and optimizations, to improve
task placement on thermally overloaded systems.
- Implement frequency invariant scheduler accounting on (some) x86
CPUs. This is done by observing and sampling the 'recent' CPU
frequency average at ~tick boundaries. The CPU provides this data
via the APERF/MPERF MSRs. This hopefully makes our capacity
estimates more precise and keeps tasks on the same CPU better even
if it might seem overloaded at a lower momentary frequency. (As
usual, turbo mode is a complication that we resolve by observing
the maximum frequency and renormalizing to it.)
- Add asymmetric CPU capacity wakeup scan to improve capacity
utilization on asymmetric topologies. (big.LITTLE systems)
- PSI fixes and optimizations.
- RT scheduling capacity awareness fixes & improvements.
- Optimize the CONFIG_RT_GROUP_SCHED constraints code.
- Misc fixes, cleanups and optimizations - see the changelog for
details"
* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (62 commits)
threads: Update PID limit comment according to futex UAPI change
sched/fair: Fix condition of avg_load calculation
sched/rt: cpupri_find: Trigger a full search as fallback
kthread: Do not preempt current task if it is going to call schedule()
sched/fair: Improve spreading of utilization
sched: Avoid scale real weight down to zero
psi: Move PF_MEMSTALL out of task->flags
MAINTAINERS: Add maintenance information for psi
psi: Optimize switching tasks inside shared cgroups
psi: Fix cpu.pressure for cpu.max and competing cgroups
sched/core: Distribute tasks within affinity masks
sched/fair: Fix enqueue_task_fair warning
thermal/cpu-cooling, sched/core: Move the arch_set_thermal_pressure() API to generic scheduler code
sched/rt: Remove unnecessary push for unfit tasks
sched/rt: Allow pulling unfitting task
sched/rt: Optimize cpupri_find() on non-heterogenous systems
sched/rt: Re-instate old behavior in select_task_rq_rt()
sched/rt: cpupri_find: Implement fallback mechanism for !fit case
sched/fair: Fix reordering of enqueue/dequeue_task_fair()
sched/fair: Fix runnable_avg for throttled cfs
...
Pull perf updates from Ingo Molnar:
"The main changes in this cycle were:
Kernel side changes:
- A couple of x86/cpu cleanups and changes were grandfathered in due
to patch dependencies. These clean up the set of CPU model/family
matching macros with a consistent namespace and C99 initializer
style.
- A bunch of updates to various low level PMU drivers:
* AMD Family 19h L3 uncore PMU
* Intel Tiger Lake uncore support
* misc fixes to LBR TOS sampling
- optprobe fixes
- perf/cgroup: optimize cgroup event sched-in processing
- misc cleanups and fixes
Tooling side changes are to:
- perf {annotate,expr,record,report,stat,test}
- perl scripting
- libapi, libperf and libtraceevent
- vendor events on Intel and S390, ARM cs-etm
- Intel PT updates
- Documentation changes and updates to core facilities
- misc cleanups, fixes and other enhancements"
* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (89 commits)
cpufreq/intel_pstate: Fix wrong macro conversion
x86/cpu: Cleanup the now unused CPU match macros
hwrng: via_rng: Convert to new X86 CPU match macros
crypto: Convert to new CPU match macros
ASoC: Intel: Convert to new X86 CPU match macros
powercap/intel_rapl: Convert to new X86 CPU match macros
PCI: intel-mid: Convert to new X86 CPU match macros
mmc: sdhci-acpi: Convert to new X86 CPU match macros
intel_idle: Convert to new X86 CPU match macros
extcon: axp288: Convert to new X86 CPU match macros
thermal: Convert to new X86 CPU match macros
hwmon: Convert to new X86 CPU match macros
platform/x86: Convert to new CPU match macros
EDAC: Convert to new X86 CPU match macros
cpufreq: Convert to new X86 CPU match macros
ACPI: Convert to new X86 CPU match macros
x86/platform: Convert to new CPU match macros
x86/kernel: Convert to new CPU match macros
x86/kvm: Convert to new CPU match macros
x86/perf/events: Convert to new CPU match macros
...
Modify cpufreq Kconfig to select schedutil as the default governor
if the intel_pstate driver has been selected and SMP support is
enabled (because schedutil depends on SMP).
Also select schedutil as well as the performance governor from the
intel_pstate Kconfig section to ensure the equivalence of the passive
and active mode governor configuration options.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The initial policy value set by intel_pstate_cpu_init() depends on
whether or not CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is set, but
that is not necessary, because the core will set the policy to
"performance" in cpufreq_init_policy() if the default governor is
"performance" anyway.
Accordingly, change intel_pstate_cpu_init() to always set policy
to CPUFREQ_POLICY_POWERSAVE initially to provide a valid fallback
value to cpufreq_init_policy() in case the default cpufreq governor
is neither "powersave" nor "performance".
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The feature flag hwp_support_ids are supposed to match on is
X86_FEATURE_HWP, not X86_FEATURE_APERFMPERF. Fix it.
[ bp: Write commit message. ]
Fixes: b11d77fa30 ("cpufreq: Convert to new X86 CPU match macros")
Reported-by: kernel test robot <rong.a.chen@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20200324060124.GC11705@shao2-debian
The patch avoids allocating cpufreq_policy on stack hence fixing frame
size overflow in 'powernv_cpufreq_work_fn'
Fixes: 227942809b ("cpufreq: powernv: Restore cpu frequency to policy->cur on unthrottling")
Signed-off-by: Pratik Rajesh Sampat <psampat@linux.ibm.com>
Reviewed-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200316135743.57735-1-psampat@linux.ibm.com
The new macro set has a consistent namespace and uses C99 initializers
instead of the grufty C89 ones.
Get rid the of most local macro wrappers for consistency. The ones which
make sense for readability are renamed to X86_MATCH*.
In the centrino driver this also removes the two extra duplicates of family
6 model 13 which have no value at all.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lkml.kernel.org/r/87eetheu88.fsf@nanos.tec.linutronix.de
There is no reason that this gunk is in a generic header file. The wildcard
defines need to stay as they are required by file2alias.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lkml.kernel.org/r/20200320131508.736205164@linutronix.de
Pull ARM cpufreq drivers updates for v5.7 from Viresh Kumar:
"This pull request contains:
- update to imx cpufreq drivers to improve their support (Anson Huang,
Christoph Niedermaier, and Peng Fan).
- Update to qcom cpufreq to support other krait based SoCs (Ansuel
Smith).
- Update ti cpufreq driver to support OPP_PLUS (Lokesh Vutla).
- Update cpufreq-dt driver to allow platfoem specific intermediate
callbacks (Peng Fan)."
* 'cpufreq/arm/linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm:
cpufreq: qcom: Add support for krait based socs
cpufreq: imx6q-cpufreq: Improve the logic of -EPROBE_DEFER handling
cpufreq: dt: Allow platform specific intermediate callbacks
cpufreq: imx-cpufreq-dt: Correct i.MX8MP's market segment fuse location
cpufreq: imx6q: read OCOTP through nvmem for imx6q
cpufreq: imx6q: fix error handling
cpufreq: imx-cpufreq-dt: Add "cpu-supply" property check
cpufreq: ti-cpufreq: Add support for OPP_PLUS
cpufreq: imx6q: Fixes unwanted cpu overclocking on i.MX6ULL
In Certain QCOM SoCs like ipq8064, apq8064, msm8960, msm8974
that has KRAIT processors the voltage/current value of each OPP
varies based on the silicon variant in use.
The required OPP related data is determined based on
the efuse value. This is similar to the existing code for
kryo cores. So adding support for krait cores here.
Signed-off-by: Sricharan R <sricharan@codeaurora.org>
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Since snprintf() returns the would-be-output size instead of the
actual output size, the succeeding calls may go beyond the given
buffer limit. Fix it by replacing with scnprintf().
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
