It delivers current TCP time stamp in ms unit, and is used
in place of confusing tcp_time_stamp_raw()
It is the same family than tcp_clock_ns() and tcp_clock_ms().
tcp_time_stamp_raw() will be replaced later for TSval
contexts with a more descriptive name.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a test to check if inner rt curves are upgraded to sc curves.
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Support uint / sint types in specs and YNL.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
uint/sint support will add more logic to mnl_type(),
deduplicate it and make it more accessible.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Extend the support to full range of min/max checks.
None of the existing YNL families required complex integer validation.
The support is less than trivial, because we try to keep struct nla_policy
tiny the min/max members it holds in place are s16. Meaning we can only
express checks in range of s16. For larger ranges we need to define
a structure and link it in the policy.
Link: https://lore.kernel.org/r/20231018163917.2514503-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
For range validation we'll need to know if any individual
attribute is used on input (i.e. whether we will generate
a policy for it). Track this information.
Link: https://lore.kernel.org/r/20231018163917.2514503-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Feels like an up-tick in regression fixes, mostly for older releases.
The hfsc fix, tcp_disconnect() and Intel WWAN fixes stand out as fairly
clear-cut user reported regressions. The mlx5 DMA bug was causing strife
for 390x folks. The fixes themselves are not particularly scary, tho.
No open investigations / outstanding reports at the time of writing.
Current release - regressions:
- eth: mlx5: perform DMA operations in the right locations,
make devices usable on s390x, again
- sched: sch_hfsc: upgrade 'rt' to 'sc' when it becomes a inner curve,
previous fix of rejecting invalid config broke some scripts
- rfkill: reduce data->mtx scope in rfkill_fop_open, avoid deadlock
- revert "ethtool: Fix mod state of verbose no_mask bitset",
needs more work
Current release - new code bugs:
- tcp: fix listen() warning with v4-mapped-v6 address
Previous releases - regressions:
- tcp: allow tcp_disconnect() again when threads are waiting,
it was denied to plug a constant source of bugs but turns out
.NET depends on it
- eth: mlx5: fix double-free if buffer refill fails under OOM
- revert "net: wwan: iosm: enable runtime pm support for 7560",
it's causing regressions and the WWAN team at Intel disappeared
- tcp: tsq: relax tcp_small_queue_check() when rtx queue contains
a single skb, fix single-stream perf regression on some devices
Previous releases - always broken:
- Bluetooth:
- fix issues in legacy BR/EDR PIN code pairing
- correctly bounds check and pad HCI_MON_NEW_INDEX name
- netfilter:
- more fixes / follow ups for the large "commit protocol" rework,
which went in as a fix to 6.5
- fix null-derefs on netlink attrs which user may not pass in
- tcp: fix excessive TLP and RACK timeouts from HZ rounding
(bless Debian for keeping HZ=250 alive)
- net: more strict VIRTIO_NET_HDR_GSO_UDP_L4 validation, prevent
letting frankenstein UDP super-frames from getting into the stack
- net: fix interface altnames when ifc moves to a new namespace
- eth: qed: fix the size of the RX buffers
- mptcp: avoid sending RST when closing the initial subflow
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEE6jPA+I1ugmIBA4hXMUZtbf5SIrsFAmUxawUACgkQMUZtbf5S
Irt75w/+MC2ilnFQhfoQqpCxL2uHWOKzhenUz2PoNKR60OKgLLmTq8YBYcpyCVAQ
wBQaNzNu1/yjF5BG7aNS/j0suGeJsOfhfoahQvXlLaat9NuDqxTpaeoT5FZ7eNQw
RZ8+CJug3BRDV0TkaJH9UDVC/nfJTsnsGWNIhNXYGPsuveqAUun+xrnN8ZbvZIrn
6D9rMF+u9SdVO+ANCquXBC7+CWEWiJS1ljUrU7BRNiv/9FSlnPQtjOdpuKleeBO8
4usMS7TezHNgRdiAKC8GjSGUiIkIIMJT4y4wuczBEQAD4Pkki9UpBrui97ozOj7h
W4N7UOuPlUBIardvKNoYz9rZyiFXBcPPm0GruHiuCqpxyqmzoFgv2XJsb/6KfzNn
Dyro+lvh8smtbFHvFqiwaNu5y8ucfClaowvR4gjSe2KcB7hIpwNkh6vWC6OMGJK3
hiKHnDrnXBQMbnP1YfiJ4feLmm3UYCG8eFdv/ULZT0a9TzZ7fKfzAfywUwD+/O8Y
+S28Hr9srdDCHO7ih/gF3Wq9wtnnLy8QEkpt7cpXjRDj0uWH8JkHU3YEIGF2814Y
LNVGmX9y6RcgrHNp03K1PmUcgAzhTTuV9QRoQKEucuBT5AK9ALDQ8YomnWDWDgrp
UOdJPi1RUTsmqslADF15wZ9W5Ki/cDnUJsE4HU/MtnM2w95C49Q=
=z1F6
-----END PGP SIGNATURE-----
Merge tag 'net-6.6-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from bluetooth, netfilter, WiFi.
Feels like an up-tick in regression fixes, mostly for older releases.
The hfsc fix, tcp_disconnect() and Intel WWAN fixes stand out as
fairly clear-cut user reported regressions. The mlx5 DMA bug was
causing strife for 390x folks. The fixes themselves are not
particularly scary, tho. No open investigations / outstanding reports
at the time of writing.
Current release - regressions:
- eth: mlx5: perform DMA operations in the right locations, make
devices usable on s390x, again
- sched: sch_hfsc: upgrade 'rt' to 'sc' when it becomes a inner
curve, previous fix of rejecting invalid config broke some scripts
- rfkill: reduce data->mtx scope in rfkill_fop_open, avoid deadlock
- revert "ethtool: Fix mod state of verbose no_mask bitset", needs
more work
Current release - new code bugs:
- tcp: fix listen() warning with v4-mapped-v6 address
Previous releases - regressions:
- tcp: allow tcp_disconnect() again when threads are waiting, it was
denied to plug a constant source of bugs but turns out .NET depends
on it
- eth: mlx5: fix double-free if buffer refill fails under OOM
- revert "net: wwan: iosm: enable runtime pm support for 7560", it's
causing regressions and the WWAN team at Intel disappeared
- tcp: tsq: relax tcp_small_queue_check() when rtx queue contains a
single skb, fix single-stream perf regression on some devices
Previous releases - always broken:
- Bluetooth:
- fix issues in legacy BR/EDR PIN code pairing
- correctly bounds check and pad HCI_MON_NEW_INDEX name
- netfilter:
- more fixes / follow ups for the large "commit protocol" rework,
which went in as a fix to 6.5
- fix null-derefs on netlink attrs which user may not pass in
- tcp: fix excessive TLP and RACK timeouts from HZ rounding (bless
Debian for keeping HZ=250 alive)
- net: more strict VIRTIO_NET_HDR_GSO_UDP_L4 validation, prevent
letting frankenstein UDP super-frames from getting into the stack
- net: fix interface altnames when ifc moves to a new namespace
- eth: qed: fix the size of the RX buffers
- mptcp: avoid sending RST when closing the initial subflow"
* tag 'net-6.6-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (94 commits)
Revert "ethtool: Fix mod state of verbose no_mask bitset"
selftests: mptcp: join: no RST when rm subflow/addr
mptcp: avoid sending RST when closing the initial subflow
mptcp: more conservative check for zero probes
tcp: check mptcp-level constraints for backlog coalescing
selftests: mptcp: join: correctly check for no RST
net: ti: icssg-prueth: Fix r30 CMDs bitmasks
selftests: net: add very basic test for netdev names and namespaces
net: move altnames together with the netdevice
net: avoid UAF on deleted altname
net: check for altname conflicts when changing netdev's netns
net: fix ifname in netlink ntf during netns move
net: ethernet: ti: Fix mixed module-builtin object
net: phy: bcm7xxx: Add missing 16nm EPHY statistics
ipv4: fib: annotate races around nh->nh_saddr_genid and nh->nh_saddr
tcp_bpf: properly release resources on error paths
net/sched: sch_hfsc: upgrade 'rt' to 'sc' when it becomes a inner curve
net: mdio-mux: fix C45 access returning -EIO after API change
tcp: tsq: relax tcp_small_queue_check() when rtx queue contains a single skb
octeon_ep: update BQL sent bytes before ringing doorbell
...
Recently, we noticed that some RST were wrongly generated when removing
the initial subflow.
This patch makes sure RST are not sent when removing any subflows or any
addresses.
Fixes: c2b2ae3925 ("mptcp: handle correctly disconnect() failures")
Cc: stable@vger.kernel.org
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Matthieu Baerts <matttbe@kernel.org>
Signed-off-by: Mat Martineau <martineau@kernel.org>
Link: https://lore.kernel.org/r/20231018-send-net-20231018-v1-5-17ecb002e41d@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The commit mentioned below was more tolerant with the number of RST seen
during a test because in some uncontrollable situations, multiple RST
can be generated.
But it was not taking into account the case where no RST are expected:
this validation was then no longer reporting issues for the 0 RST case
because it is not possible to have less than 0 RST in the counter. This
patch fixes the issue by adding a specific condition.
Fixes: 6bf41020b7 ("selftests: mptcp: update and extend fastclose test-cases")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts <matttbe@kernel.org>
Signed-off-by: Mat Martineau <martineau@kernel.org>
Link: https://lore.kernel.org/r/20231018-send-net-20231018-v1-1-17ecb002e41d@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add selftest for fixes around naming netdevs and namespaces.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Some taprio tests need auxiliary scripts to wait for workqueue events to
process. Move them to a dedicated folder in order to package them for
the kselftests tarball.
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Link: https://lore.kernel.org/r/20231017152309.3196320-3-pctammela@mojatatu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Make sure CI builds using just tc-testing/config can run all tdc tests.
Some tests were broken because of missing knobs.
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Link: https://lore.kernel.org/r/20231017152309.3196320-2-pctammela@mojatatu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit 7d5cb68af6 (perf/benchmark: add a new benchmark for
seccom_unotify) added a reference to __NR_seccomp into perf. This is
fine as it added also a definition of __NR_seccomp for 64-bit. But it
failed to do so for 32-bit as instead of ifndef, ifdef was used.
Fix this typo (so fix the build of perf on 32-bit).
Fixes: 7d5cb68af6 (perf/benchmark: add a new benchmark for seccom_unotify)
Cc: Andrei Vagin <avagin@google.com>
Cc: "Peter Zijlstra (Intel)" <peterz@infradead.org>
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20231017083019.31733-1-jirislaby@kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Don't mess with the host's firewall ruleset. Since audit logging is not
per-netns, add an initial delay of a second so other selftests' netns
cleanups have a chance to finish.
Fixes: e8dbde59ca ("selftests: netfilter: Test nf_tables audit logging")
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Florian Westphal <fw@strlen.de>
When resetting multiple objects at once (via dump request), emit a log
message per table (or filled skb) and resurrect the 'entries' parameter
to contain the number of objects being logged for.
To test the skb exhaustion path, perform some bulk counter and quota
adds in the kselftest.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Reviewed-by: Richard Guy Briggs <rgb@redhat.com>
Acked-by: Paul Moore <paul@paul-moore.com> (Audit)
Signed-off-by: Florian Westphal <fw@strlen.de>
Assume that caller's 'to' offset really represents an upper boundary for
the pattern search, so patterns extending past this offset are to be
rejected.
The old behaviour also was kind of inconsistent when it comes to
fragmentation (or otherwise non-linear skbs): If the pattern started in
between 'to' and 'from' offsets but extended to the next fragment, it
was not found if 'to' offset was still within the current fragment.
Test the new behaviour in a kselftest using iptables' string match.
Suggested-by: Pablo Neira Ayuso <pablo@netfilter.org>
Fixes: f72b948dcb ("[NET]: skb_find_text ignores to argument")
Signed-off-by: Phil Sutter <phil@nwl.cc>
Reviewed-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
I recently cleaned up specs to not specify enum-as-flags
when target enum is already defined as flags.
YNL Python library did not convert flags, unfortunately,
so this caused breakage for Stan and Willem.
Note that the nlspec.py abstraction already hides the differences
between flags and enums (value vs user_value), so the changes
are pretty trivial.
Fixes: 0629f22ec1 ("ynl: netdev: drop unnecessary enum-as-flags")
Reported-and-tested-by: Willem de Bruijn <willemb@google.com>
Reported-and-tested-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/all/ZS10NtQgd_BJZ3RU@google.com/
Link: https://lore.kernel.org/r/20231016213937.1820386-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a suite covering the fdb_n_learned and fdb_max_learned bridge
features, touching all special cases in accounting at least once.
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: Johannes Nixdorf <jnixdorf-oss@avm.de>
Link: https://lore.kernel.org/r/20231016-fdb_limit-v5-5-32cddff87758@avm.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTFp0I1jqZrAX+hPRXbK58LschIgwUCZS1d4wAKCRDbK58LschI
g4DSAP441CdKh8fd+wNKUSKHFbpCQ6EvocR6Nf+Sj2DFUx/w/QEA7mfju7Abqjc3
xwDEx0BuhrjMrjV5MmEpxc7lYl9XcQU=
=vuWk
-----END PGP SIGNATURE-----
Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Daniel Borkmann says:
====================
pull-request: bpf-next 2023-10-16
We've added 90 non-merge commits during the last 25 day(s) which contain
a total of 120 files changed, 3519 insertions(+), 895 deletions(-).
The main changes are:
1) Add missed stats for kprobes to retrieve the number of missed kprobe
executions and subsequent executions of BPF programs, from Jiri Olsa.
2) Add cgroup BPF sockaddr hooks for unix sockets. The use case is
for systemd to reimplement the LogNamespace feature which allows
running multiple instances of systemd-journald to process the logs
of different services, from Daan De Meyer.
3) Implement BPF CPUv4 support for s390x BPF JIT, from Ilya Leoshkevich.
4) Improve BPF verifier log output for scalar registers to better
disambiguate their internal state wrt defaults vs min/max values
matching, from Andrii Nakryiko.
5) Extend the BPF fib lookup helpers for IPv4/IPv6 to support retrieving
the source IP address with a new BPF_FIB_LOOKUP_SRC flag,
from Martynas Pumputis.
6) Add support for open-coded task_vma iterator to help with symbolization
for BPF-collected user stacks, from Dave Marchevsky.
7) Add libbpf getters for accessing individual BPF ring buffers which
is useful for polling them individually, for example, from Martin Kelly.
8) Extend AF_XDP selftests to validate the SHARED_UMEM feature,
from Tushar Vyavahare.
9) Improve BPF selftests cross-building support for riscv arch,
from Björn Töpel.
10) Add the ability to pin a BPF timer to the same calling CPU,
from David Vernet.
11) Fix libbpf's bpf_tracing.h macros for riscv to use the generic
implementation of PT_REGS_SYSCALL_REGS() to access syscall arguments,
from Alexandre Ghiti.
12) Extend libbpf to support symbol versioning for uprobes, from Hengqi Chen.
13) Fix bpftool's skeleton code generation to guarantee that ELF data
is 8 byte aligned, from Ian Rogers.
14) Inherit system-wide cpu_mitigations_off() setting for Spectre v1/v4
security mitigations in BPF verifier, from Yafang Shao.
15) Annotate struct bpf_stack_map with __counted_by attribute to prepare
BPF side for upcoming __counted_by compiler support, from Kees Cook.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (90 commits)
bpf: Ensure proper register state printing for cond jumps
bpf: Disambiguate SCALAR register state output in verifier logs
selftests/bpf: Make align selftests more robust
selftests/bpf: Improve missed_kprobe_recursion test robustness
selftests/bpf: Improve percpu_alloc test robustness
selftests/bpf: Add tests for open-coded task_vma iter
bpf: Introduce task_vma open-coded iterator kfuncs
selftests/bpf: Rename bpf_iter_task_vma.c to bpf_iter_task_vmas.c
bpf: Don't explicitly emit BTF for struct btf_iter_num
bpf: Change syscall_nr type to int in struct syscall_tp_t
net/bpf: Avoid unused "sin_addr_len" warning when CONFIG_CGROUP_BPF is not set
bpf: Avoid unnecessary audit log for CPU security mitigations
selftests/bpf: Add tests for cgroup unix socket address hooks
selftests/bpf: Make sure mount directory exists
documentation/bpf: Document cgroup unix socket address hooks
bpftool: Add support for cgroup unix socket address hooks
libbpf: Add support for cgroup unix socket address hooks
bpf: Implement cgroup sockaddr hooks for unix sockets
bpf: Add bpf_sock_addr_set_sun_path() to allow writing unix sockaddr from bpf
bpf: Propagate modified uaddrlen from cgroup sockaddr programs
...
====================
Link: https://lore.kernel.org/r/20231016204803.30153-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- Fix the handling of the phycal timer offset when FEAT_ECV
and CNTPOFF_EL2 are implemented.
- Restore the functionnality of Permission Indirection that
was broken by the Fine Grained Trapping rework
- Cleanup some PMU event sharing code
MIPS:
- Fix W=1 build.
s390:
- One small fix for gisa to avoid stalls.
x86:
- Truncate writes to PMU counters to the counter's width to avoid spurious
overflows when emulating counter events in software.
- Set the LVTPC entry mask bit when handling a PMI (to match Intel-defined
architectural behavior).
- Treat KVM_REQ_PMI as a wake event instead of queueing host IRQ work to
kick the guest out of emulated halt.
- Fix for loading XSAVE state from an old kernel into a new one.
- Fixes for AMD AVIC
selftests:
- Play nice with %llx when formatting guest printf and assert statements.
- Clean up stale test metadata.
- Zero-initialize structures in memslot perf test to workaround a suspected
"may be used uninitialized" false positives from GCC.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmUtvXgUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroOE3gf/Q0Xvi/oU/+iDMuvfCbMZg/nhbrsa
WmE/zXLrCF0DknppAsWulkhLGL2ceL6X+f37f2vWpBdG9SVDG/vSAg+QQDwsXiKN
hTJoaybtMMPZM64emPZKeLMrq3A/U32qIMmWMJkoQRyz6dftUhGqZEuy1jw8oomJ
n9idRDCMkbo+bick4URt0FEuI3Tf6dPIlG7P5hObFTw+nenzzxTjoxWZ432Mgyod
yqveEke4hcQ+6K1zdAcDNZqT9ZhxeTxAO4yrBAYfnFoPLhUXKDUumkqAQPNOhKTo
YN+b29kHBm+HvYkHN785FQla/13wjE1aq5TUj5J7NEDv4uRXDefDq2OAeg==
=b9AY
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"ARM:
- Fix the handling of the phycal timer offset when FEAT_ECV and
CNTPOFF_EL2 are implemented
- Restore the functionnality of Permission Indirection that was
broken by the Fine Grained Trapping rework
- Cleanup some PMU event sharing code
MIPS:
- Fix W=1 build
s390:
- One small fix for gisa to avoid stalls
x86:
- Truncate writes to PMU counters to the counter's width to avoid
spurious overflows when emulating counter events in software
- Set the LVTPC entry mask bit when handling a PMI (to match
Intel-defined architectural behavior)
- Treat KVM_REQ_PMI as a wake event instead of queueing host IRQ work
to kick the guest out of emulated halt
- Fix for loading XSAVE state from an old kernel into a new one
- Fixes for AMD AVIC
selftests:
- Play nice with %llx when formatting guest printf and assert
statements
- Clean up stale test metadata
- Zero-initialize structures in memslot perf test to workaround a
suspected 'may be used uninitialized' false positives from GCC"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (21 commits)
KVM: arm64: timers: Correctly handle TGE flip with CNTPOFF_EL2
KVM: arm64: POR{E0}_EL1 do not need trap handlers
KVM: arm64: Add nPIR{E0}_EL1 to HFG traps
KVM: MIPS: fix -Wunused-but-set-variable warning
KVM: arm64: pmu: Drop redundant check for non-NULL kvm_pmu_events
KVM: SVM: Fix build error when using -Werror=unused-but-set-variable
x86: KVM: SVM: refresh AVIC inhibition in svm_leave_nested()
x86: KVM: SVM: add support for Invalid IPI Vector interception
x86: KVM: SVM: always update the x2avic msr interception
KVM: selftests: Force load all supported XSAVE state in state test
KVM: selftests: Load XSAVE state into untouched vCPU during state test
KVM: selftests: Touch relevant XSAVE state in guest for state test
KVM: x86: Constrain guest-supported xfeatures only at KVM_GET_XSAVE{2}
x86/fpu: Allow caller to constrain xfeatures when copying to uabi buffer
KVM: selftests: Zero-initialize entire test_result in memslot perf test
KVM: selftests: Remove obsolete and incorrect test case metadata
KVM: selftests: Treat %llx like %lx when formatting guest printf
KVM: x86/pmu: Synthesize at most one PMI per VM-exit
KVM: x86: Mask LVTPC when handling a PMI
KVM: x86/pmu: Truncate counter value to allowed width on write
...
Currently the way that verifier prints SCALAR_VALUE register state (and
PTR_TO_PACKET, which can have var_off and ranges info as well) is very
ambiguous.
In the name of brevity we are trying to eliminate "unnecessary" output
of umin/umax, smin/smax, u32_min/u32_max, and s32_min/s32_max values, if
possible. Current rules are that if any of those have their default
value (which for mins is the minimal value of its respective types: 0,
S32_MIN, or S64_MIN, while for maxs it's U32_MAX, S32_MAX, S64_MAX, or
U64_MAX) *OR* if there is another min/max value that as matching value.
E.g., if smin=100 and umin=100, we'll emit only umin=10, omitting smin
altogether. This approach has a few problems, being both ambiguous and
sort-of incorrect in some cases.
Ambiguity is due to missing value could be either default value or value
of umin/umax or smin/smax. This is especially confusing when we mix
signed and unsigned ranges. Quite often, umin=0 and smin=0, and so we'll
have only `umin=0` leaving anyone reading verifier log to guess whether
smin is actually 0 or it's actually -9223372036854775808 (S64_MIN). And
often times it's important to know, especially when debugging tricky
issues.
"Sort-of incorrectness" comes from mixing negative and positive values.
E.g., if umin is some large positive number, it can be equal to smin
which is, interpreted as signed value, is actually some negative value.
Currently, that smin will be omitted and only umin will be emitted with
a large positive value, giving an impression that smin is also positive.
Anyway, ambiguity is the biggest issue making it impossible to have an
exact understanding of register state, preventing any sort of automated
testing of verifier state based on verifier log. This patch is
attempting to rectify the situation by removing ambiguity, while
minimizing the verboseness of register state output.
The rules are straightforward:
- if some of the values are missing, then it definitely has a default
value. I.e., `umin=0` means that umin is zero, but smin is actually
S64_MIN;
- all the various boundaries that happen to have the same value are
emitted in one equality separated sequence. E.g., if umin and smin are
both 100, we'll emit `smin=umin=100`, making this explicit;
- we do not mix negative and positive values together, and even if
they happen to have the same bit-level value, they will be emitted
separately with proper sign. I.e., if both umax and smax happen to be
0xffffffffffffffff, we'll emit them both separately as
`smax=-1,umax=18446744073709551615`;
- in the name of a bit more uniformity and consistency,
{u32,s32}_{min,max} are renamed to {s,u}{min,max}32, which seems to
improve readability.
The above means that in case of all 4 ranges being, say, [50, 100] range,
we'd previously see hugely ambiguous:
R1=scalar(umin=50,umax=100)
Now, we'll be more explicit:
R1=scalar(smin=umin=smin32=umin32=50,smax=umax=smax32=umax32=100)
This is slightly more verbose, but distinct from the case when we don't
know anything about signed boundaries and 32-bit boundaries, which under
new rules will match the old case:
R1=scalar(umin=50,umax=100)
Also, in the name of simplicity of implementation and consistency, order
for {s,u}32_{min,max} are emitted *before* var_off. Previously they were
emitted afterwards, for unclear reasons.
This patch also includes a few fixes to selftests that expect exact
register state to accommodate slight changes to verifier format. You can
see that the changes are pretty minimal in common cases.
Note, the special case when SCALAR_VALUE register is a known constant
isn't changed, we'll emit constant value once, interpreted as signed
value.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/bpf/20231011223728.3188086-5-andrii@kernel.org
Align subtest is very specific and finicky about expected verifier log
output and format. This is often completely unnecessary as in a bunch of
situations test actually cares about var_off part of register state. But
given how exact it is right now, any tiny verifier log changes can lead
to align tests failures, requiring constant adjustment.
This patch tries to make this a bit more robust by making logic first
search for specified register and then allowing to match only portion of
register state, not everything exactly. This will come handly with
follow up changes to SCALAR register output disambiguation.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/bpf/20231011223728.3188086-4-andrii@kernel.org
Given missed_kprobe_recursion is non-serial and uses common testing
kfuncs to count number of recursion misses it's possible that some other
parallel test can trigger extraneous recursion misses. So we can't
expect exactly 1 miss. Relax conditions and expect at least one.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/bpf/20231011223728.3188086-3-andrii@kernel.org
Make these non-serial tests filter BPF programs by intended PID of
a test runner process. This makes it isolated from other parallel tests
that might interfere accidentally.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/bpf/20231011223728.3188086-2-andrii@kernel.org
These variables are never referenced in the code, just remove them
Signed-off-by: zhujun2 <zhujun2@cmss.chinamobile.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add option to test timestamp event queue mask manipulation in testptp.
Option -F allows the user to specify a single channel that will be
applied on the mask filter via IOCTL.
The test program will maintain the file open until user input is
received.
This allows checking the effect of the IOCTL in debugfs.
eg:
Console 1:
```
Channel 12 exclusively enabled. Check on debugfs.
Press any key to continue
```
Console 2:
```
0x00000000 0x00000001 0x00000000 0x00000000 0x00000000 0x00000000
0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000
0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000
0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000
0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000
0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000
0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000
0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000
0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000
0x00000000 0x00000000 0x00000000 0x00000000 0x00000000 0x00000000
0x00000000 0x00000000 0x00000000 0x00000000
```
Signed-off-by: Xabier Marquiegui <reibax@gmail.com>
Suggested-by: Richard Cochran <richardcochran@gmail.com>
Suggested-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use debugfs to be able to view channel mask applied to every timestamp
event queue.
Every time the device is opened, a new entry is created in
`$DEBUGFS_MOUNTPOINT/ptpN/$INSTANCE_ADDRESS/mask`.
The mask value can be viewed grouped in 32bit decimal values using cat,
or converted to hexadecimal with the included `ptpchmaskfmt.sh` script.
32 bit values are listed from least significant to most significant.
Signed-off-by: Xabier Marquiegui <reibax@gmail.com>
Suggested-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The ct_tuple v4 data structure decode / encode routines were using
the v6 IP address decode and relying on default encode. This could
cause exceptions during encode / decode depending on how a ct4
tuple would appear in a netlink message.
Caught during code review.
Fixes: e52b07aa1a ("selftests: openvswitch: add flow dump support")
Signed-off-by: Aaron Conole <aconole@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Kernels that don't have support for openvswitch drop reasons also
won't have the drop counter reasons, so we should skip the test
completely. It previously wasn't possible to build a test case
for this without polluting the datapath, so we introduce a mechanism
to clear all the flows from a datapath allowing us to test for
explicit drop actions, and then clear the flows to build the
original test case.
Fixes: 4242029164 ("selftests: openvswitch: add explicit drop testcase")
Signed-off-by: Aaron Conole <aconole@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In case of fatal signal, or early abort at least cleanup the current
test case.
Fixes: 25f16c873f ("selftests: add openvswitch selftest suite")
Signed-off-by: Aaron Conole <aconole@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Paolo Abeni reports that on some systems the pyroute2 version isn't
new enough to run the test suite. Ensure that we support a minimum
version of 0.6 for all cases (which does include the existing ones).
The 0.6.1 version was released in May of 2021, so should be
propagated to most installations at this point.
The alternative that Paolo proposed was to only skip when the
add-flow is being run. This would be okay for most cases, except
if a future test case is added that needs to do flow dump without
an associated add (just guessing). In that case, it could also be
broken and we would need additional skip logic anyway. Just draw
a line in the sand now.
Fixes: 25f16c873f ("selftests: add openvswitch selftest suite")
Reported-by: Paolo Abeni <pabeni@redhat.com>
Closes: https://lore.kernel.org/lkml/8470c431e0930d2ea204a9363a60937289b7fdbe.camel@redhat.com/
Signed-off-by: Aaron Conole <aconole@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
- Play nice with %llx when formatting guest printf and assert statements.
- Clean up stale test metadata.
- Zero-initialize structures in memslot perf test to workaround a suspected
"may be used uninitialized" false positives from GCC.
-----BEGIN PGP SIGNATURE-----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=LJ3q
-----END PGP SIGNATURE-----
Merge tag 'kvm-x86-selftests-6.6-fixes' of https://github.com/kvm-x86/linux into HEAD
KVM selftests fixes for 6.6:
- Play nice with %llx when formatting guest printf and assert statements.
- Clean up stale test metadata.
- Zero-initialize structures in memslot perf test to workaround a suspected
"may be used uninitialized" false positives from GCC.
This adds set of tests which use io_uring for rx/tx. This test suite is
implemented as separated util like 'vsock_test' and has the same set of
input arguments as 'vsock_test'. These tests only cover cases of data
transmission (no connect/bind/accept etc).
Signed-off-by: Arseniy Krasnov <avkrasnov@salutedevices.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
To use this option pass '--zerocopy' parameter:
./vsock_perf --zerocopy --sender <cid> ...
With this option MSG_ZEROCOPY flag will be passed to the 'send()' call.
Signed-off-by: Arseniy Krasnov <avkrasnov@salutedevices.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This adds three tests for MSG_ZEROCOPY feature:
1) SOCK_STREAM tx with different buffers.
2) SOCK_SEQPACKET tx with different buffers.
3) SOCK_STREAM test to read empty error queue of the socket.
Patch also works as preparation for the next patches for tools in this
patchset: vsock_perf and vsock_uring_test:
1) Adds several new functions to util.c - they will be also used by
vsock_uring_test.
2) Adds two new functions for MSG_ZEROCOPY handling to a new source
file - such source will be shared between vsock_test, vsock_perf and
vsock_uring_test, thus avoiding code copy-pasting.
Signed-off-by: Arseniy Krasnov <avkrasnov@salutedevices.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Make sure that the command values used for replies are correct. This is
only affecting generated userspace helpers, no change on kernel code.
Fixes: 7199c86247 ("netlink: specs: devlink: add commands that do per-instance dump")
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20231012115811.298129-1-jiri@resnulli.us
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The open-coded task_vma iter added earlier in this series allows for
natural iteration over a task's vmas using existing open-coded iter
infrastructure, specifically bpf_for_each.
This patch adds a test demonstrating this pattern and validating
correctness. The vma->vm_start and vma->vm_end addresses of the first
1000 vmas are recorded and compared to /proc/PID/maps output. As
expected, both see the same vmas and addresses - with the exception of
the [vsyscall] vma - which is explained in a comment in the prog_tests
program.
Signed-off-by: Dave Marchevsky <davemarchevsky@fb.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20231013204426.1074286-5-davemarchevsky@fb.com
Further patches in this series will add a struct bpf_iter_task_vma,
which will result in a name collision with the selftest prog renamed in
this patch. Rename the selftest to avoid the collision.
Signed-off-by: Dave Marchevsky <davemarchevsky@fb.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20231013204426.1074286-3-davemarchevsky@fb.com
The tests rely on the IPv{4,6} FIB trace points being triggered once for
each forwarded packet. If receive processing is deferred to the
ksoftirqd task these invocations will not be counted and the tests will
fail. Fix by specifying the '-a' flag to avoid perf from filtering on
the mausezahn task.
Before:
# ./fib_tests.sh -t ipv4_mpath_list
IPv4 multipath list receive tests
TEST: Multipath route hit ratio (.68) [FAIL]
# ./fib_tests.sh -t ipv6_mpath_list
IPv6 multipath list receive tests
TEST: Multipath route hit ratio (.27) [FAIL]
After:
# ./fib_tests.sh -t ipv4_mpath_list
IPv4 multipath list receive tests
TEST: Multipath route hit ratio (1.00) [ OK ]
# ./fib_tests.sh -t ipv6_mpath_list
IPv6 multipath list receive tests
TEST: Multipath route hit ratio (.99) [ OK ]
Fixes: 8ae9efb859 ("selftests: fib_tests: Add multipath list receive tests")
Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/netdev/202309191658.c00d8b8-oliver.sang@intel.com/
Tested-by: kernel test robot <oliver.sang@intel.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Tested-by: Sriram Yagnaraman <sriram.yagnaraman@est.tech>
Link: https://lore.kernel.org/r/20231010132113.3014691-3-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The test relies on the fib:fib_table_lookup trace point being triggered
once for each forwarded packet. If RP filter is not disabled, the trace
point will be triggered twice for each packet (for source validation and
forwarding), potentially masking actual bugs. Fix by explicitly
disabling RP filter.
Before:
# ./fib_tests.sh -t ipv4_mpath_list
IPv4 multipath list receive tests
TEST: Multipath route hit ratio (1.99) [ OK ]
After:
# ./fib_tests.sh -t ipv4_mpath_list
IPv4 multipath list receive tests
TEST: Multipath route hit ratio (.99) [ OK ]
Fixes: 8ae9efb859 ("selftests: fib_tests: Add multipath list receive tests")
Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/netdev/202309191658.c00d8b8-oliver.sang@intel.com/
Tested-by: kernel test robot <oliver.sang@intel.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Tested-by: Sriram Yagnaraman <sriram.yagnaraman@est.tech>
Link: https://lore.kernel.org/r/20231010132113.3014691-2-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
linux-rt-devel tree contains a patch (b1773eac3f29c ("sched: Add support
for lazy preemption")) that adds an extra member to struct trace_entry.
This causes the offset of args field in struct trace_event_raw_sys_enter
be different from the one in struct syscall_trace_enter:
struct trace_event_raw_sys_enter {
struct trace_entry ent; /* 0 12 */
/* XXX last struct has 3 bytes of padding */
/* XXX 4 bytes hole, try to pack */
long int id; /* 16 8 */
long unsigned int args[6]; /* 24 48 */
/* --- cacheline 1 boundary (64 bytes) was 8 bytes ago --- */
char __data[]; /* 72 0 */
/* size: 72, cachelines: 2, members: 4 */
/* sum members: 68, holes: 1, sum holes: 4 */
/* paddings: 1, sum paddings: 3 */
/* last cacheline: 8 bytes */
};
struct syscall_trace_enter {
struct trace_entry ent; /* 0 12 */
/* XXX last struct has 3 bytes of padding */
int nr; /* 12 4 */
long unsigned int args[]; /* 16 0 */
/* size: 16, cachelines: 1, members: 3 */
/* paddings: 1, sum paddings: 3 */
/* last cacheline: 16 bytes */
};
This, in turn, causes perf_event_set_bpf_prog() fail while running bpf
test_profiler testcase because max_ctx_offset is calculated based on the
former struct, while off on the latter:
10488 if (is_tracepoint || is_syscall_tp) {
10489 int off = trace_event_get_offsets(event->tp_event);
10490
10491 if (prog->aux->max_ctx_offset > off)
10492 return -EACCES;
10493 }
What bpf program is actually getting is a pointer to struct
syscall_tp_t, defined in kernel/trace/trace_syscalls.c. This patch fixes
the problem by aligning struct syscall_tp_t with struct
syscall_trace_(enter|exit) and changing the tests to use these structs
to dereference context.
Signed-off-by: Artem Savkov <asavkov@redhat.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Link: https://lore.kernel.org/bpf/20231013054219.172920-1-asavkov@redhat.com
* A handful of build fixes.
* A fix to avoid mixing up user/kernel-mode breakpoints, which can
manifest as a hang when mixing k/uprobes with other breakpoint
sources.
* A fix to avoid double-allocting crash kernel memory.
* A fix for tracefs syscall name mangling, which was causing syscalls
not to show up in tracefs.
* A fix to the perf driver to enable the hw events when selected, which
can trigger a BUG on some userspace access patterns.
-----BEGIN PGP SIGNATURE-----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=kOgc
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-6.6-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Palmer Dabbelt:
- A handful of build fixes
- A fix to avoid mixing up user/kernel-mode breakpoints, which can
manifest as a hang when mixing k/uprobes with other breakpoint
sources
- A fix to avoid double-allocting crash kernel memory
- A fix for tracefs syscall name mangling, which was causing syscalls
not to show up in tracefs
- A fix to the perf driver to enable the hw events when selected, which
can trigger a BUG on some userspace access patterns
* tag 'riscv-for-linus-6.6-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
drivers: perf: Fix panic in riscv SBI mmap support
riscv: Fix ftrace syscall handling which are now prefixed with __riscv_
RISC-V: Fix wrong use of CONFIG_HAVE_SOFTIRQ_ON_OWN_STACK
riscv: kdump: fix crashkernel reserving problem on RISC-V
riscv: Remove duplicate objcopy flag
riscv: signal: fix sigaltstack frame size checking
riscv: errata: andes: Makefile: Fix randconfig build issue
riscv: Only consider swbp/ss handlers for correct privileged mode
riscv: kselftests: Fix mm build by removing testcases subdirectory
The file name used in flash test was "dummy" because at the time test
was written, drivers were responsible for file request and as netdevsim
didn't do that, name was unused. However, the file load request is
now done in devlink code and therefore the file has to exist.
Use first random file from /lib/firmware for this purpose.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Extend the test to check flushing with bridge device, test flush by device
and by VID.
Add test case for flushing with "self" and "master" and attributes that are
supported only in one driver, this is unrecommended configuration, check it
to verify that user gets an error.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Test all the supported arguments for FDB flush. The test checks
configuration, not traffic. Note that the flag 'offloaded' is not checked
as it is not relevant when there is no hardware.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Cross-merge networking fixes after downstream PR.
No conflicts.
Adjacent changes:
kernel/bpf/verifier.c
829955981c ("bpf: Fix verifier log for async callback return values")
a923819fb2 ("bpf: Treat first argument as return value for bpf_throw")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
