For LDX_B/H/W, when zext has been inserted by verifier, it'll return 1,
and no exception handling will continue. Also, when the offset is 12-bit
value, the redundant zext inserted by the verifier is not removed. Fix
both scenarios by moving down the removal of redundant zext.
Signed-off-by: Pu Lehui <pulehui@huawei.com>
Link: https://lore.kernel.org/r/20230824095001.3408573-2-pulehui@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Toke Høiland-Jørgensen says:
====================
samples/bpf: Remove unmaintained XDP sample utilities
The samples/bpf directory in the kernel tree started out as a way of showcasing
different aspects of BPF functionality by writing small utility programs for
each feature. However, as the BPF subsystem has matured, the preferred way of
including userspace code with a feature has become the BPF selftests, which also
have the benefit of being consistently run as part of the BPF CI system.
As a result of this shift, the utilities in samples/bpf have seen little love,
and have slowly bitrotted. There have been sporadic cleanup patches over the
years, but it's clear that the utilities are far from maintained.
For XDP in particular, some of the utilities have been used as benchmarking aids
when implementing new kernel features, which seems to be the main reason they
have stuck around; any updates the utilities have seen have been targeted at
this use case. However, as the BPF subsystem as a whole has moved on, it has
become increasingly difficult to incorporate new features into these utilities
because they predate most of the modern BPF features (such as kfuncs and BTF).
Rather than try to update these utilities and keep maintaining them in the
kernel tree, we have ported the useful features of the utilities to the
xdp-tools package. In the porting process we also updated the utilities to take
advantage of modern BPF features, integrated them with libxdp, and polished the
user interface.
As these utilities are standalone tools, maintaining them out of tree is
simpler, and we plan to keep maintaining them in the xdp-tools repo. To direct
users of these utilities to the right place, this series removes the utilities
from samples/bpf, leaving in place only a couple of utilities whose
functionality have not yet been ported to xdp-tools.
The xdp-tools repository is located on Github at the following URL:
https://github.com/xdp-project/xdp-tools
The commits in the series removes one utility each, explaining how the
equivalent functionality can be obtained with xdp-tools.
v2:
- Add equivalent xdp-tools commands for each removed utility
v3:
- Add link to xdp-tools in the README
Toke Høiland-Jørgensen (7):
samples/bpf: Remove the xdp_monitor utility
samples/bpf: Remove the xdp_redirect* utilities
samples/bpf: Remove the xdp_rxq_info utility
samples/bpf: Remove the xdp1 and xdp2 utilities
samples/bpf: Remove the xdp_sample_pkts utility
samples/bpf: Cleanup .gitignore
samples/bpf: Add note to README about the XDP utilities moved to
xdp-tools
samples/bpf/.gitignore | 12 -
samples/bpf/Makefile | 48 +-
samples/bpf/README.rst | 6 +
samples/bpf/xdp1_kern.c | 100 ----
samples/bpf/xdp1_user.c | 166 ------
samples/bpf/xdp2_kern.c | 125 -----
samples/bpf/xdp_monitor.bpf.c | 8 -
samples/bpf/xdp_monitor_user.c | 118 -----
samples/bpf/xdp_redirect.bpf.c | 49 --
samples/bpf/xdp_redirect_cpu.bpf.c | 539 -------------------
samples/bpf/xdp_redirect_cpu_user.c | 559 --------------------
samples/bpf/xdp_redirect_map.bpf.c | 97 ----
samples/bpf/xdp_redirect_map_multi.bpf.c | 77 ---
samples/bpf/xdp_redirect_map_multi_user.c | 232 --------
samples/bpf/xdp_redirect_map_user.c | 228 --------
samples/bpf/xdp_redirect_user.c | 172 ------
samples/bpf/xdp_rxq_info_kern.c | 140 -----
samples/bpf/xdp_rxq_info_user.c | 614 ----------------------
samples/bpf/xdp_sample_pkts_kern.c | 57 --
samples/bpf/xdp_sample_pkts_user.c | 196 -------
20 files changed, 7 insertions(+), 3536 deletions(-)
delete mode 100644 samples/bpf/xdp1_kern.c
delete mode 100644 samples/bpf/xdp1_user.c
delete mode 100644 samples/bpf/xdp2_kern.c
delete mode 100644 samples/bpf/xdp_monitor.bpf.c
delete mode 100644 samples/bpf/xdp_monitor_user.c
delete mode 100644 samples/bpf/xdp_redirect.bpf.c
delete mode 100644 samples/bpf/xdp_redirect_cpu.bpf.c
delete mode 100644 samples/bpf/xdp_redirect_cpu_user.c
delete mode 100644 samples/bpf/xdp_redirect_map.bpf.c
delete mode 100644 samples/bpf/xdp_redirect_map_multi.bpf.c
delete mode 100644 samples/bpf/xdp_redirect_map_multi_user.c
delete mode 100644 samples/bpf/xdp_redirect_map_user.c
delete mode 100644 samples/bpf/xdp_redirect_user.c
delete mode 100644 samples/bpf/xdp_rxq_info_kern.c
delete mode 100644 samples/bpf/xdp_rxq_info_user.c
delete mode 100644 samples/bpf/xdp_sample_pkts_kern.c
delete mode 100644 samples/bpf/xdp_sample_pkts_user.c
====================
Link: https://lore.kernel.org/r/20230824102255.1561885-1-toke@redhat.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
To help users find the XDP utilities, add a note to the README about the
new location and the conversion documentation in the commit messages.
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/r/20230824102255.1561885-8-toke@redhat.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Remove no longer present XDP utilities from .gitignore. Apart from the
recently removed XDP utilities this also includes the previously removed
xdpsock and xsk utilities.
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/r/20230824102255.1561885-7-toke@redhat.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The functionality of this utility is covered by the xdpdump utility in
xdp-tools.
There's a slight difference in usage as the xdpdump utility's main focus is
to dump packets before or after they are processed by an existing XDP
program. However, xdpdump also has the --load-xdp-program switch, which
will make it attach its own program if no existing program is loaded. With
this, xdp_sample_pkts usage can be converted as:
xdp_sample_pkts eth0
--> xdpdump --load-xdp-program eth0
To get roughly equivalent behaviour.
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/r/20230824102255.1561885-6-toke@redhat.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The functionality of these utilities have been incorporated into the
xdp-bench utility in xdp-tools.
Equivalent functionality is:
xdp1 eth0
--> xdp-bench drop -p parse-ip -l load-bytes eth0
xdp2 eth0
--> xdp-bench drop -p swap-macs eth0
Note that there's a slight difference in behaviour of those examples: the
swap-macs operation of xdp-bench doesn't use the bpf_xdp_load_bytes()
helper to load the packet data, whereas the xdp2 utility did so
unconditionally. For the parse-ip action the use of bpf_xdp_load_bytes()
can be selected by the '-l load-bytes' switch, with the difference that the
xdp-bench utility will perform two separate calls to the helper, one to
load the ethernet header and another to load the IP header; where the xdp1
utility only performed one call always loading 60 bytes of data.
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/r/20230824102255.1561885-5-toke@redhat.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The functionality of this utility has been incorporated into the xdp-bench
utility in xdp-tools, by way of the --rxq-stats argument to the 'drop',
'pass' and 'tx' commands of xdp-bench.
Some examples of how to convert xdp_rxq_info invocations into equivalent
xdp-bench commands:
xdp_rxq_info -d eth0
--> xdp-bench pass --rxq-stats eth0
xdp_rxq_info -d eth0 -a XDP_DROP -m
--> xdp-bench drop --rxq-stats -p swap-macs eth0
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/r/20230824102255.1561885-4-toke@redhat.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
These utilities have all been ported to xdp-tools as functions of the
xdp-bench utility. The four different utilities in samples are incorporated
as separate subcommands to xdp-bench, with most of the command line
parameters left intact, except that mandatory arguments are always
positional in xdp-bench. For full usage details see the --help output of
each command, or the xdp-bench man page.
Some examples of how to convert usage to xdp-bench are:
xdp_redirect eth0 eth1
--> xdp-bench redirect eth0 eth1
xdp_redirect_map eth0 eth1
--> xdp-bench redirect-map eth0 eth1
xdp_redirect_map_multi eth0 eth1 eth2 eth3
--> xdp-bench redirect-multi eth0 eth1 eth2 eth3
xdp_redirect_cpu -d eth0 -c 0 -c 1
--> xdp-bench redirect-cpu -c 0 -c 1 eth0
xdp_redirect_cpu -d eth0 -c 0 -c 1 -r eth1
--> xdp-bench redirect-cpu -c 0 -c 1 eth0 -r redirect -D eth1
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/r/20230824102255.1561885-3-toke@redhat.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This utility has been ported as-is to xdp-tools as 'xdp-monitor'. The only
difference in usage between the samples and xdp-tools versions is that the
'-v' command line parameter has been changed to '-e' in the xdp-tools
version for consistency with the other utilities.
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/r/20230824102255.1561885-2-toke@redhat.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Currently, in function bpf_obj_free_fields(), for local kptr,
a warning will be issued if the struct does not contain any
special fields. But actually the kernel seems totally okay
with a local kptr without any special fields. Permitting
no special fields also aligns with future percpu kptr which
also allows no special fields.
Acked-by: Dave Marchevsky <davemarchevsky@fb.com>
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20230824063417.201925-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Extracting btf_int_encoding() is only meaningful for BTF_KIND_INT, so we
need to check that first before inferring signedness.
Closes: https://github.com/libbpf/libbpf/issues/704
Reported-by: Lorenz Bauer <lmb@isovalent.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20230824000016.2658017-2-andrii@kernel.org
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
It seems like it was forgotten to add uprobe_multi binary to .gitignore.
Fix this trivial omission.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20230824000016.2658017-1-andrii@kernel.org
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
For bpf_object__pin_programs() there is bpf_object__unpin_programs().
Likewise bpf_object__unpin_maps() for bpf_object__pin_maps().
But no bpf_object__unpin() for bpf_object__pin(). Adding the former adds
symmetry to the API.
It's also convenient for cleanup in application code. It's an API I
would've used if it was available for a repro I was writing earlier.
Signed-off-by: Daniel Xu <dxu@dxuuu.xyz>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/bpf/b2f9d41da4a350281a0b53a804d11b68327e14e5.1692832478.git.dxu@dxuuu.xyz
Yafang Shao says:
====================
bpf: Fix an issue in verifing allow_ptr_leaks
Patch #1: An issue found in our local 6.1 kernel.
This issue also exists in bpf-next.
Patch #2: Selftess for #1
v1->v2:
- Add acked-by from Eduard
- Fix build error reported by Alexei
====================
Link: https://lore.kernel.org/r/20230823020703.3790-1-laoar.shao@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
After we converted the capabilities of our networking-bpf program from
cap_sys_admin to cap_net_admin+cap_bpf, our networking-bpf program
failed to start. Because it failed the bpf verifier, and the error log
is "R3 pointer comparison prohibited".
A simple reproducer as follows,
SEC("cls-ingress")
int ingress(struct __sk_buff *skb)
{
struct iphdr *iph = (void *)(long)skb->data + sizeof(struct ethhdr);
if ((long)(iph + 1) > (long)skb->data_end)
return TC_ACT_STOLEN;
return TC_ACT_OK;
}
Per discussion with Yonghong and Alexei [1], comparison of two packet
pointers is not a pointer leak. This patch fixes it.
Our local kernel is 6.1.y and we expect this fix to be backported to
6.1.y, so stable is CCed.
[1]. https://lore.kernel.org/bpf/CAADnVQ+Nmspr7Si+pxWn8zkE7hX-7s93ugwC+94aXSy4uQ9vBg@mail.gmail.com/
Suggested-by: Yonghong Song <yonghong.song@linux.dev>
Suggested-by: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230823020703.3790-2-laoar.shao@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
I hit a memory leak when testing bpf_program__set_attach_target().
Basically, set_attach_target() may allocate btf_vmlinux, for example,
when setting attach target for bpf_iter programs. But btf_vmlinux
is freed only in bpf_object_load(), which means if we only open
bpf object but not load it, setting attach target may leak
btf_vmlinux.
So let's free btf_vmlinux in bpf_object__close() anyway.
Signed-off-by: Hao Luo <haoluo@google.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20230822193840.1509809-1-haoluo@google.com
Add a selftest for the fix provided in the previous commit. Without the
fix, the selftest passes the verifier while it should fail. The special
logic for detecting graph root or node for reg->off and bypassing
reg->off == 0 guarantee for release helpers/kfuncs has been dropped.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20230822175140.1317749-3-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The commit being fixed introduced a hunk into check_func_arg_reg_off
that bypasses reg->off == 0 enforcement when offset points to a graph
node or root. This might possibly be done for treating bpf_rbtree_remove
and others as KF_RELEASE and then later check correct reg->off in helper
argument checks.
But this is not the case, those helpers are already not KF_RELEASE and
permit non-zero reg->off and verify it later to match the subobject in
BTF type.
However, this logic leads to bpf_obj_drop permitting free of register
arguments with non-zero offset when they point to a graph root or node
within them, which is not ok.
For instance:
struct foo {
int i;
int j;
struct bpf_rb_node node;
};
struct foo *f = bpf_obj_new(typeof(*f));
if (!f) ...
bpf_obj_drop(f); // OK
bpf_obj_drop(&f->i); // still ok from verifier PoV
bpf_obj_drop(&f->node); // Not OK, but permitted right now
Fix this by dropping the whole part of code altogether.
Fixes: 6a3cd3318f ("bpf: Migrate release_on_unlock logic to non-owning ref semantics")
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20230822175140.1317749-2-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
For a bpf_kptr_xchg() with local kptr, if the map value kptr type and
allocated local obj type does not match, with the previous patch,
the below verifier error message will be logged:
R2 is of type <allocated local obj type> but <map value kptr type> is expected
Without the previous patch, the test will have unexpected success.
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20230822050058.2887354-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
When reviewing local percpu kptr support, Alexei discovered a bug
wherea bpf_kptr_xchg() may succeed even if the map value kptr type and
locally allocated obj type do not match ([1]). Missed struct btf_id
comparison is the reason for the bug. This patch added such struct btf_id
comparison and will flag verification failure if types do not match.
[1] https://lore.kernel.org/bpf/20230819002907.io3iphmnuk43xblu@macbook-pro-8.dhcp.thefacebook.com/#t
Reported-by: Alexei Starovoitov <ast@kernel.org>
Fixes: 738c96d5e2 ("bpf: Allow local kptrs to be exchanged via bpf_kptr_xchg")
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20230822050053.2886960-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Jiri Olsa says:
====================
bpf: Add multi uprobe link
hi,
this patchset is adding support to attach multiple uprobes and usdt probes
through new uprobe_multi link.
The current uprobe is attached through the perf event and attaching many
uprobes takes a lot of time because of that.
The main reason is that we need to install perf event for each probed function
and profile shows perf event installation (perf_install_in_context) as culprit.
The new uprobe_multi link just creates raw uprobes and attaches the bpf
program to them without perf event being involved.
In addition to being faster we also save file descriptors. For the current
uprobe attach we use extra perf event fd for each probed function. The new
link just need one fd that covers all the functions we are attaching to.
v7 changes:
- fixed task release on error path and re-org the error
path to be more straightforward [Yonghong]
- re-organized uprobe_prog_run locking to follow general pattern
and removed might_fault check as it's not needed in uprobe/task
context [Yonghong]
There's support for bpftrace [2] and tetragon [1].
Also available at:
https://git.kernel.org/pub/scm/linux/kernel/git/jolsa/perf.git
uprobe_multi
thanks,
jirka
[1] https://github.com/cilium/tetragon/pull/936
[2] https://github.com/iovisor/bpftrace/compare/master...olsajiri:bpftrace:uprobe_multi
[3] https://lore.kernel.org/bpf/20230628115329.248450-1-laoar.shao@gmail.com/
---
====================
Link: https://lore.kernel.org/r/20230809083440.3209381-1-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Attaching extra program to same functions system wide for api
and link tests.
This way we can test the pid filter works properly when there's
extra system wide consumer on the same uprobe that will trigger
the original uprobe handler.
We expect to have the same counts as before.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20230809083440.3209381-29-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Running api and link tests also with pid filter and checking
the probe gets executed only for specific pid.
Spawning extra process to trigger attached uprobes and checking
we get correct counts from executed programs.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20230809083440.3209381-28-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Adding test for cookies setup/retrieval in uprobe_link uprobes
and making sure bpf_get_attach_cookie works properly.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20230809083440.3209381-27-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Adding test that attaches 50k usdt probes in usdt_multi binary.
After the attach is done we run the binary and make sure we get
proper amount of hits.
With current uprobes:
# perf stat --null ./test_progs -n 254/6
#254/6 uprobe_multi_test/bench_usdt:OK
#254 uprobe_multi_test:OK
Summary: 1/1 PASSED, 0 SKIPPED, 0 FAILED
Performance counter stats for './test_progs -n 254/6':
1353.659680562 seconds time elapsed
With uprobe_multi link:
# perf stat --null ./test_progs -n 254/6
#254/6 uprobe_multi_test/bench_usdt:OK
#254 uprobe_multi_test:OK
Summary: 1/1 PASSED, 0 SKIPPED, 0 FAILED
Performance counter stats for './test_progs -n 254/6':
0.322046364 seconds time elapsed
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20230809083440.3209381-26-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Adding code in uprobe_multi test binary that defines 50k usdts
and will serve as attach point for uprobe_multi usdt bench test
in following patch.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20230809083440.3209381-25-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Adding test that attaches 50k uprobes in uprobe_multi binary.
After the attach is done we run the binary and make sure we
get proper amount of hits.
The resulting attach/detach times on my setup:
test_bench_attach_uprobe:PASS:uprobe_multi__open 0 nsec
test_bench_attach_uprobe:PASS:uprobe_multi__attach 0 nsec
test_bench_attach_uprobe:PASS:uprobes_count 0 nsec
test_bench_attach_uprobe: attached in 0.346s
test_bench_attach_uprobe: detached in 0.419s
#262/5 uprobe_multi_test/bench_uprobe:OK
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20230809083440.3209381-24-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Adding uprobe_multi test program that defines 50k uprobe_multi_func_*
functions and will serve as attach point for uprobe_multi bench test
in following patch.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20230809083440.3209381-23-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Adding uprobe_multi test for bpf_link_create attach function.
Testing attachment using the struct bpf_link_create_opts.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20230809083440.3209381-22-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Adding uprobe_multi test for bpf_program__attach_uprobe_multi
attach function.
Testing attachment using glob patterns and via bpf_uprobe_multi_opts
paths/syms fields.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20230809083440.3209381-21-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Adding uprobe_multi test for skeleton load/attach functions,
to test skeleton auto attach for uprobe_multi link.
Test that bpf_get_func_ip works properly for uprobe_multi
attachment.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20230809083440.3209381-20-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
We'd like to have single copy of get_time_ns used b bench and test_progs,
but we can't just include bench.h, because of conflicting 'struct env'
objects.
Moving get_time_ns to testing_helpers.h which is being included by both
bench and test_progs objects.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20230809083440.3209381-19-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Adding support for usdt_manager_attach_usdt to use uprobe_multi
link to attach to usdt probes.
The uprobe_multi support is detected before the usdt program is
loaded and its expected_attach_type is set accordingly.
If uprobe_multi support is detected the usdt_manager_attach_usdt
gathers uprobes info and calls bpf_program__attach_uprobe to
create all needed uprobes.
If uprobe_multi support is not detected the old behaviour stays.
Also adding usdt.s program section for sleepable usdt probes.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20230809083440.3209381-18-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Adding uprobe-multi link detection. It will be used later in
bpf_program__attach_usdt function to check and use uprobe_multi
link over standard uprobe links.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20230809083440.3209381-17-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Adding support for several uprobe_multi program sections
to allow auto attach of multi_uprobe programs.
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20230809083440.3209381-16-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Adding bpf_program__attach_uprobe_multi function that
allows to attach multiple uprobes with uprobe_multi link.
The user can specify uprobes with direct arguments:
binary_path/func_pattern/pid
or with struct bpf_uprobe_multi_opts opts argument fields:
const char **syms;
const unsigned long *offsets;
const unsigned long *ref_ctr_offsets;
const __u64 *cookies;
User can specify 2 mutually exclusive set of inputs:
1) use only path/func_pattern/pid arguments
2) use path/pid with allowed combinations of:
syms/offsets/ref_ctr_offsets/cookies/cnt
- syms and offsets are mutually exclusive
- ref_ctr_offsets and cookies are optional
Any other usage results in error.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20230809083440.3209381-15-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Adding new uprobe_multi struct to bpf_link_create_opts object
to pass multiple uprobe data to link_create attr uapi.
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20230809083440.3209381-14-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Adding elf_resolve_pattern_offsets function that looks up
offsets for symbols specified by pattern argument.
The 'pattern' argument allows wildcards (*?' supported).
Offsets are returned in allocated array together with its
size and needs to be released by the caller.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20230809083440.3209381-13-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Adding elf_resolve_syms_offsets function that looks up
offsets for symbols specified in syms array argument.
Offsets are returned in allocated array with the 'cnt' size,
that needs to be released by the caller.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20230809083440.3209381-12-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Adding elf symbol iterator object (and some functions) that follow
open-coded iterator pattern and some functions to ease up iterating
elf object symbols.
The idea is to iterate single symbol section with:
struct elf_sym_iter iter;
struct elf_sym *sym;
if (elf_sym_iter_new(&iter, elf, binary_path, SHT_DYNSYM))
goto error;
while ((sym = elf_sym_iter_next(&iter))) {
...
}
I considered opening the elf inside the iterator and iterate all symbol
sections, but then it gets more complicated wrt user checks for when
the next section is processed.
Plus side is the we don't need 'exit' function, because caller/user is
in charge of that.
The returned iterated symbol object from elf_sym_iter_next function
is placed inside the struct elf_sym_iter, so no extra allocation or
argument is needed.
Suggested-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20230809083440.3209381-11-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Adding elf_open/elf_close functions and using it in
elf_find_func_offset_from_file function. It will be
used in following changes to save some common code.
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20230809083440.3209381-10-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Adding new elf object that will contain elf related functions.
There's no functional change.
Suggested-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20230809083440.3209381-9-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Adding new uprobe_multi attach type and link names,
so the functions can resolve the new values.
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20230809083440.3209381-8-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Adding support for bpf_get_func_ip helper being called from
ebpf program attached by uprobe_multi link.
It returns the ip of the uprobe.
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20230809083440.3209381-7-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Adding support to specify pid for uprobe_multi link and the uprobes
are created only for task with given pid value.
Using the consumer.filter filter callback for that, so the task gets
filtered during the uprobe installation.
We still need to check the task during runtime in the uprobe handler,
because the handler could get executed if there's another system
wide consumer on the same uprobe (thanks Oleg for the insight).
Cc: Oleg Nesterov <oleg@redhat.com>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20230809083440.3209381-6-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Adding support to specify cookies array for uprobe_multi link.
The cookies array share indexes and length with other uprobe_multi
arrays (offsets/ref_ctr_offsets).
The cookies[i] value defines cookie for i-the uprobe and will be
returned by bpf_get_attach_cookie helper when called from ebpf
program hooked to that specific uprobe.
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yafang Shao <laoar.shao@gmail.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20230809083440.3209381-5-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
