Steffen Klassert says:
====================
pull request (net-next): ipsec-next 2022-05-13
1) Cleanups for the code behind the XFRM offload API. This is a
preparation for the extension of the API for policy offload.
From Leon Romanovsky.
* 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next:
xfrm: drop not needed flags variable in XFRM offload struct
net/mlx5e: Use XFRM state direction instead of flags
netdevsim: rely on XFRM state direction instead of flags
ixgbe: propagate XFRM offload state direction instead of flags
xfrm: store and rely on direction to construct offload flags
xfrm: rename xfrm_state_offload struct to allow reuse
xfrm: delete not used number of external headers
xfrm: free not used XFRM_ESP_NO_TRAILER flag
====================
Link: https://lore.kernel.org/r/20220513151218.4010119-1-steffen.klassert@secunet.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The checksum is optional for UDP packets. However nf_reject would
previously require a valid checksum to elicit a response such as
ICMP_DEST_UNREACH.
Add some logic to nf_reject_verify_csum to determine if a UDP packet has
a zero checksum and should therefore not be verified.
Signed-off-by: Kevin Mitchell <kevmitch@arista.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
This reverts commits:
0dad4087a8 ("tcp/dccp: get rid of inet_twsk_purge()")
d507204d3c ("tcp/dccp: add tw->tw_bslot")
As Leonard pointed out, a newly allocated netns can happen
to reuse a freed 'struct net'.
While TCP TW timers were covered by my patches, other things were not:
1) Lookups in rx path (INET_MATCH() and INET6_MATCH()), as they look
at 4-tuple plus the 'struct net' pointer.
2) /proc/net/tcp[6] and inet_diag, same reason.
3) hashinfo->bhash[], same reason.
Fixing all this seems risky, lets instead revert.
In the future, we might have a per netns tcp hash table, or
a per netns list of timewait sockets...
Fixes: 0dad4087a8 ("tcp/dccp: get rid of inet_twsk_purge()")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Leonard Crestez <cdleonard@gmail.com>
Tested-by: Leonard Crestez <cdleonard@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The listen sk is currently stored in two hash tables,
listening_hash (hashed by port) and lhash2 (hashed by port and address).
After commit 0ee58dad5b ("net: tcp6: prefer listeners bound to an address")
and commit d9fbc7f643 ("net: tcp: prefer listeners bound to an address"),
the TCP-SYN lookup fast path does not use listening_hash.
The commit 05c0b35709 ("tcp: seq_file: Replace listening_hash with lhash2")
also moved the seq_file (/proc/net/tcp) iteration usage from
listening_hash to lhash2.
There are still a few listening_hash usages left.
One of them is inet_reuseport_add_sock() which uses the listening_hash
to search a listen sk during the listen() system call. This turns
out to be very slow on use cases that listen on many different
VIPs at a popular port (e.g. 443). [ On top of the slowness in
adding to the tail in the IPv6 case ]. The latter patch has a
selftest to demonstrate this case.
This patch takes this chance to move all remaining listening_hash
usages to lhash2 and then retire listening_hash.
Since most changes need to be done together, it is hard to cut
the listening_hash to lhash2 switch into small patches. The
changes in this patch is highlighted here for the review
purpose.
1. Because of the listening_hash removal, lhash2 can use the
sk->sk_nulls_node instead of the icsk->icsk_listen_portaddr_node.
This will also keep the sk_unhashed() check to work as is
after stop adding sk to listening_hash.
The union is removed from inet_listen_hashbucket because
only nulls_head is needed.
2. icsk->icsk_listen_portaddr_node and its helpers are removed.
3. The current lhash2 users needs to iterate with sk_nulls_node
instead of icsk_listen_portaddr_node.
One case is in the inet[6]_lhash2_lookup().
Another case is the seq_file iterator in tcp_ipv4.c.
One thing to note is sk_nulls_next() is needed
because the old inet_lhash2_for_each_icsk_continue()
does a "next" first before iterating.
4. Move the remaining listening_hash usage to lhash2
inet_reuseport_add_sock() which this series is
trying to improve.
inet_diag.c and mptcp_diag.c are the final two
remaining use cases and is moved to lhash2 now also.
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
After removal of Innova IPsec support from mlx5 driver, the last user
of this XFRM_ESP_NO_TRAILER was gone too. This means that we can safely
remove it as no other hardware is capable (or need) to remove ESP trailer.
Reviewed-by: Raed Salem <raeds@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
SipHash replaced MD5 in secure_ipv{4,6}_port_ephemeral() via commit
7cd23e5300 ("secure_seq: use SipHash in place of MD5"), but the output
remained truncated to 32-bit only. In order to exploit more bits from the
hash, let's make the functions return the full 64-bit of siphash_3u32().
We also make sure the port offset calculation in __inet_hash_connect()
remains done on 32-bit to avoid the need for div_u64_rem() and an extra
cost on 32-bit systems.
Cc: Jason A. Donenfeld <Jason@zx2c4.com>
Cc: Moshe Kol <moshe.kol@mail.huji.ac.il>
Cc: Yossi Gilad <yossi.gilad@mail.huji.ac.il>
Cc: Amit Klein <aksecurity@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Creating a new netdevice allocates at least ~50Kb of memory for various
kernel objects, but only ~5Kb of them are accounted to memcg. As a result,
creating an unlimited number of netdevice inside a memcg-limited container
does not fall within memcg restrictions, consumes a significant part
of the host's memory, can cause global OOM and lead to random kills of
host processes.
The main consumers of non-accounted memory are:
~10Kb 80+ kernfs nodes
~6Kb ipv6_add_dev() allocations
6Kb __register_sysctl_table() allocations
4Kb neigh_sysctl_register() allocations
4Kb __devinet_sysctl_register() allocations
4Kb __addrconf_sysctl_register() allocations
Accounting of these objects allows to increase the share of memcg-related
memory up to 60-70% (~38Kb accounted vs ~54Kb total for dummy netdevice
on typical VM with default Fedora 35 kernel) and this should be enough
to somehow protect the host from misuse inside container.
Other related objects are quite small and may not be taken into account
to minimize the expected performance degradation.
It should be separately mentonied ~300 bytes of percpu allocation
of struct ipstats_mib in snmp6_alloc_dev(), on huge multi-cpu nodes
it can become the main consumer of memory.
This patch does not enables kernfs accounting as it affects
other parts of the kernel and should be discussed separately.
However, even without kernfs, this patch significantly improves the
current situation and allows to take into account more than half
of all netdevice allocations.
Signed-off-by: Vasily Averin <vvs@openvz.org>
Acked-by: Luis Chamberlain <mcgrof@kernel.org>
Link: https://lore.kernel.org/r/354a0a5f-9ec3-a25c-3215-304eab2157bc@openvz.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Recently we made o_seqno atomic_t. Stop special-casing TUNNEL_SEQ, and
always mark IP6GRE[TAP] devices as NETIF_F_LLTX, since we no longer need
the TX lock (&txq->_xmit_lock).
Signed-off-by: Peilin Ye <peilin.ye@bytedance.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Whenever RCU protected list replaces an object,
the pointer to the new object needs to be updated
_before_ the call to kfree_rcu() or call_rcu()
Also ip6_mc_msfilter() needs to update the pointer
before releasing the mc_lock mutex.
Note that linux-5.13 was supporting kfree_rcu(NULL, rcu),
so this fix does not need the conditional test I was
forced to use in the equivalent patch for IPv4.
Fixes: 882ba1f73c ("mld: convert ipv6_mc_socklist->sflist to RCU")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Throw neigh checks in ip6_finish_output2() under a single slow path if,
so we don't have the overhead in the hot path.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There are two callers of __ip6_finish_output(), both are in
ip6_finish_output(). We can combine the call sites into one and handle
return code after, that will inline __ip6_finish_output().
Note, error handling under NET_XMIT_CN will only return 0 if
__ip6_finish_output() succeded, and in this case it return 0.
Considering that NET_XMIT_SUCCESS is 0, it'll be returning exactly the
same result for it as before.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Adding a new socket option, SO_RCVMARK, to indicate that SO_MARK
should be included in the ancillary data returned by recvmsg().
Renamed the sock_recv_ts_and_drops() function to sock_recv_cmsgs().
Signed-off-by: Erin MacNeil <lnx.erin@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Acked-by: Marc Kleine-Budde <mkl@pengutronix.de>
Link: https://lore.kernel.org/r/20220427200259.2564-1-lnx.erin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Logic added in commit f35f821935 ("tcp: defer skb freeing after socket
lock is released") helped bulk TCP flows to move the cost of skbs
frees outside of critical section where socket lock was held.
But for RPC traffic, or hosts with RFS enabled, the solution is far from
being ideal.
For RPC traffic, recvmsg() has to return to user space right after
skb payload has been consumed, meaning that BH handler has no chance
to pick the skb before recvmsg() thread. This issue is more visible
with BIG TCP, as more RPC fit one skb.
For RFS, even if BH handler picks the skbs, they are still picked
from the cpu on which user thread is running.
Ideally, it is better to free the skbs (and associated page frags)
on the cpu that originally allocated them.
This patch removes the per socket anchor (sk->defer_list) and
instead uses a per-cpu list, which will hold more skbs per round.
This new per-cpu list is drained at the end of net_action_rx(),
after incoming packets have been processed, to lower latencies.
In normal conditions, skbs are added to the per-cpu list with
no further action. In the (unlikely) cases where the cpu does not
run net_action_rx() handler fast enough, we use an IPI to raise
NET_RX_SOFTIRQ on the remote cpu.
Also, we do not bother draining the per-cpu list from dev_cpu_dead()
This is because skbs in this list have no requirement on how fast
they should be freed.
Note that we can add in the future a small per-cpu cache
if we see any contention on sd->defer_lock.
Tested on a pair of hosts with 100Gbit NIC, RFS enabled,
and /proc/sys/net/ipv4/tcp_rmem[2] tuned to 16MB to work around
page recycling strategy used by NIC driver (its page pool capacity
being too small compared to number of skbs/pages held in sockets
receive queues)
Note that this tuning was only done to demonstrate worse
conditions for skb freeing for this particular test.
These conditions can happen in more general production workload.
10 runs of one TCP_STREAM flow
Before:
Average throughput: 49685 Mbit.
Kernel profiles on cpu running user thread recvmsg() show high cost for
skb freeing related functions (*)
57.81% [kernel] [k] copy_user_enhanced_fast_string
(*) 12.87% [kernel] [k] skb_release_data
(*) 4.25% [kernel] [k] __free_one_page
(*) 3.57% [kernel] [k] __list_del_entry_valid
1.85% [kernel] [k] __netif_receive_skb_core
1.60% [kernel] [k] __skb_datagram_iter
(*) 1.59% [kernel] [k] free_unref_page_commit
(*) 1.16% [kernel] [k] __slab_free
1.16% [kernel] [k] _copy_to_iter
(*) 1.01% [kernel] [k] kfree
(*) 0.88% [kernel] [k] free_unref_page
0.57% [kernel] [k] ip6_rcv_core
0.55% [kernel] [k] ip6t_do_table
0.54% [kernel] [k] flush_smp_call_function_queue
(*) 0.54% [kernel] [k] free_pcppages_bulk
0.51% [kernel] [k] llist_reverse_order
0.38% [kernel] [k] process_backlog
(*) 0.38% [kernel] [k] free_pcp_prepare
0.37% [kernel] [k] tcp_recvmsg_locked
(*) 0.37% [kernel] [k] __list_add_valid
0.34% [kernel] [k] sock_rfree
0.34% [kernel] [k] _raw_spin_lock_irq
(*) 0.33% [kernel] [k] __page_cache_release
0.33% [kernel] [k] tcp_v6_rcv
(*) 0.33% [kernel] [k] __put_page
(*) 0.29% [kernel] [k] __mod_zone_page_state
0.27% [kernel] [k] _raw_spin_lock
After patch:
Average throughput: 73076 Mbit.
Kernel profiles on cpu running user thread recvmsg() looks better:
81.35% [kernel] [k] copy_user_enhanced_fast_string
1.95% [kernel] [k] _copy_to_iter
1.95% [kernel] [k] __skb_datagram_iter
1.27% [kernel] [k] __netif_receive_skb_core
1.03% [kernel] [k] ip6t_do_table
0.60% [kernel] [k] sock_rfree
0.50% [kernel] [k] tcp_v6_rcv
0.47% [kernel] [k] ip6_rcv_core
0.45% [kernel] [k] read_tsc
0.44% [kernel] [k] _raw_spin_lock_irqsave
0.37% [kernel] [k] _raw_spin_lock
0.37% [kernel] [k] native_irq_return_iret
0.33% [kernel] [k] __inet6_lookup_established
0.31% [kernel] [k] ip6_protocol_deliver_rcu
0.29% [kernel] [k] tcp_rcv_established
0.29% [kernel] [k] llist_reverse_order
v2: kdoc issue (kernel bots)
do not defer if (alloc_cpu == smp_processor_id()) (Paolo)
replace the sk_buff_head with a single-linked list (Jakub)
add a READ_ONCE()/WRITE_ONCE() for the lockless read of sd->defer_list
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Link: https://lore.kernel.org/r/20220422201237.416238-1-eric.dumazet@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
As pointed out by Jakub Kicinski, currently using TUNNEL_SEQ in
collect_md mode is racy for [IP6]GRE[TAP] devices. Consider the
following sequence of events:
1. An [IP6]GRE[TAP] device is created in collect_md mode using "ip link
add ... external". "ip" ignores "[o]seq" if "external" is specified,
so TUNNEL_SEQ is off, and the device is marked as NETIF_F_LLTX (i.e.
it uses lockless TX);
2. Someone sets TUNNEL_SEQ on outgoing skb's, using e.g.
bpf_skb_set_tunnel_key() in an eBPF program attached to this device;
3. gre_fb_xmit() or __gre6_xmit() processes these skb's:
gre_build_header(skb, tun_hlen,
flags, protocol,
tunnel_id_to_key32(tun_info->key.tun_id),
(flags & TUNNEL_SEQ) ? htonl(tunnel->o_seqno++)
: 0); ^^^^^^^^^^^^^^^^^
Since we are not using the TX lock (&txq->_xmit_lock), multiple CPUs may
try to do this tunnel->o_seqno++ in parallel, which is racy. Fix it by
making o_seqno atomic_t.
As mentioned by Eric Dumazet in commit b790e01aee ("ip_gre: lockless
xmit"), making o_seqno atomic_t increases "chance for packets being out
of order at receiver" when NETIF_F_LLTX is on.
Maybe a better fix would be:
1. Do not ignore "oseq" in external mode. Users MUST specify "oseq" if
they want the kernel to allow sequencing of outgoing packets;
2. Reject all outgoing TUNNEL_SEQ packets if the device was not created
with "oseq".
Unfortunately, that would break userspace.
We could now make [IP6]GRE[TAP] devices always NETIF_F_LLTX, but let us
do it in separate patches to keep this fix minimal.
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Fixes: 77a5196a80 ("gre: add sequence number for collect md mode.")
Signed-off-by: Peilin Ye <peilin.ye@bytedance.com>
Acked-by: William Tu <u9012063@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
For IP6GRE and IP6GRETAP devices, currently o_seqno starts from 1 in
native mode. According to RFC 2890 2.2., "The first datagram is sent
with a sequence number of 0." Fix it.
It is worth mentioning that o_seqno already starts from 0 in collect_md
mode, see the "if (tunnel->parms.collect_md)" clause in __gre6_xmit(),
where tunnel->o_seqno is passed to gre_build_header() before getting
incremented.
Fixes: c12b395a46 ("gre: Support GRE over IPv6")
Signed-off-by: Peilin Ye <peilin.ye@bytedance.com>
Acked-by: William Tu <u9012063@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The commit referenced below fixed packet re-routing if Netfilter mangles
a routing key property of a packet and the packet is routed in a VRF L3
domain. The fix, however, addressed IPv4 re-routing, only.
This commit applies the same behavior for IPv6. While at it, untangle
the nested ternary operator to make the code more readable.
Fixes: 6d8b49c3a3 ("netfilter: Update ip_route_me_harder to consider L3 domain")
Cc: stable@vger.kernel.org
Signed-off-by: Martin Willi <martin@strongswan.org>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
This patch replaces some sk_ipv6only tests with ipv6_only_sock().
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.co.jp>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since commit 9fe516ba3f ("inet: move ipv6only in sock_common"),
ipv6_only_sock() and __ipv6_only_sock() are the same macro. Let's
remove the one.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.co.jp>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix mistake in the original patch where limits were specified but the
handler didn't take care of the limits.
Signed-off-by: Arun Ajith S <aajith@arista.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a new neighbour cache entry in STALE state for routers on receiving
an unsolicited (gratuitous) neighbour advertisement with
target link-layer-address option specified.
This is similar to the arp_accept configuration for IPv4.
A new sysctl endpoint is created to turn on this behaviour:
/proc/sys/net/ipv6/conf/interface/accept_unsolicited_na.
Signed-off-by: Arun Ajith S <aajith@arista.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Reads and Writes to ip6_rt_gc_expire always have been racy,
as syzbot reported lately [1]
There is a possible risk of under-flow, leading
to unexpected high value passed to fib6_run_gc(),
although I have not observed this in the field.
Hosts hitting ip6_dst_gc() very hard are under pretty bad
state anyway.
[1]
BUG: KCSAN: data-race in ip6_dst_gc / ip6_dst_gc
read-write to 0xffff888102110744 of 4 bytes by task 13165 on cpu 1:
ip6_dst_gc+0x1f3/0x220 net/ipv6/route.c:3311
dst_alloc+0x9b/0x160 net/core/dst.c:86
ip6_dst_alloc net/ipv6/route.c:344 [inline]
icmp6_dst_alloc+0xb2/0x360 net/ipv6/route.c:3261
mld_sendpack+0x2b9/0x580 net/ipv6/mcast.c:1807
mld_send_cr net/ipv6/mcast.c:2119 [inline]
mld_ifc_work+0x576/0x800 net/ipv6/mcast.c:2651
process_one_work+0x3d3/0x720 kernel/workqueue.c:2289
worker_thread+0x618/0xa70 kernel/workqueue.c:2436
kthread+0x1a9/0x1e0 kernel/kthread.c:376
ret_from_fork+0x1f/0x30
read-write to 0xffff888102110744 of 4 bytes by task 11607 on cpu 0:
ip6_dst_gc+0x1f3/0x220 net/ipv6/route.c:3311
dst_alloc+0x9b/0x160 net/core/dst.c:86
ip6_dst_alloc net/ipv6/route.c:344 [inline]
icmp6_dst_alloc+0xb2/0x360 net/ipv6/route.c:3261
mld_sendpack+0x2b9/0x580 net/ipv6/mcast.c:1807
mld_send_cr net/ipv6/mcast.c:2119 [inline]
mld_ifc_work+0x576/0x800 net/ipv6/mcast.c:2651
process_one_work+0x3d3/0x720 kernel/workqueue.c:2289
worker_thread+0x618/0xa70 kernel/workqueue.c:2436
kthread+0x1a9/0x1e0 kernel/kthread.c:376
ret_from_fork+0x1f/0x30
value changed: 0x00000bb3 -> 0x00000ba9
Reported by Kernel Concurrency Sanitizer on:
CPU: 0 PID: 11607 Comm: kworker/0:21 Not tainted 5.18.0-rc1-syzkaller-00037-g42e7a03d3bad-dirty #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Workqueue: mld mld_ifc_work
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20220413181333.649424-1-eric.dumazet@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Feng reported an skb_under_panic BUG triggered by running
test_ip6gretap() in tools/testing/selftests/bpf/test_tunnel.sh:
[ 82.492551] skbuff: skb_under_panic: text:ffffffffb268bb8e len:403 put:12 head:ffff9997c5480000 data:ffff9997c547fff8 tail:0x18b end:0x2c0 dev:ip6gretap11
<...>
[ 82.607380] Call Trace:
[ 82.609389] <TASK>
[ 82.611136] skb_push.cold.109+0x10/0x10
[ 82.614289] __gre6_xmit+0x41e/0x590
[ 82.617169] ip6gre_tunnel_xmit+0x344/0x3f0
[ 82.620526] dev_hard_start_xmit+0xf1/0x330
[ 82.623882] sch_direct_xmit+0xe4/0x250
[ 82.626961] __dev_queue_xmit+0x720/0xfe0
<...>
[ 82.633431] packet_sendmsg+0x96a/0x1cb0
[ 82.636568] sock_sendmsg+0x30/0x40
<...>
The following sequence of events caused the BUG:
1. During ip6gretap device initialization, tunnel->tun_hlen (e.g. 4) is
calculated based on old flags (see ip6gre_calc_hlen());
2. packet_snd() reserves header room for skb A, assuming
tunnel->tun_hlen is 4;
3. Later (in clsact Qdisc), the eBPF program sets a new tunnel key for
skb A using bpf_skb_set_tunnel_key() (see _ip6gretap_set_tunnel());
4. __gre6_xmit() detects the new tunnel key, and recalculates
"tun_hlen" (e.g. 12) based on new flags (e.g. TUNNEL_KEY and
TUNNEL_SEQ);
5. gre_build_header() calls skb_push() with insufficient reserved header
room, triggering the BUG.
As sugguested by Cong, fix it by moving the call to skb_cow_head() after
the recalculation of tun_hlen.
Reproducer:
OBJ=$LINUX/tools/testing/selftests/bpf/test_tunnel_kern.o
ip netns add at_ns0
ip link add veth0 type veth peer name veth1
ip link set veth0 netns at_ns0
ip netns exec at_ns0 ip addr add 172.16.1.100/24 dev veth0
ip netns exec at_ns0 ip link set dev veth0 up
ip link set dev veth1 up mtu 1500
ip addr add dev veth1 172.16.1.200/24
ip netns exec at_ns0 ip addr add ::11/96 dev veth0
ip netns exec at_ns0 ip link set dev veth0 up
ip addr add dev veth1 ::22/96
ip link set dev veth1 up
ip netns exec at_ns0 \
ip link add dev ip6gretap00 type ip6gretap seq flowlabel 0xbcdef key 2 \
local ::11 remote ::22
ip netns exec at_ns0 ip addr add dev ip6gretap00 10.1.1.100/24
ip netns exec at_ns0 ip addr add dev ip6gretap00 fc80::100/96
ip netns exec at_ns0 ip link set dev ip6gretap00 up
ip link add dev ip6gretap11 type ip6gretap external
ip addr add dev ip6gretap11 10.1.1.200/24
ip addr add dev ip6gretap11 fc80::200/24
ip link set dev ip6gretap11 up
tc qdisc add dev ip6gretap11 clsact
tc filter add dev ip6gretap11 egress bpf da obj $OBJ sec ip6gretap_set_tunnel
tc filter add dev ip6gretap11 ingress bpf da obj $OBJ sec ip6gretap_get_tunnel
ping6 -c 3 -w 10 -q ::11
Fixes: 6712abc168 ("ip6_gre: add ip6 gre and gretap collect_md mode")
Reported-by: Feng Zhou <zhoufeng.zf@bytedance.com>
Co-developed-by: Cong Wang <cong.wang@bytedance.com>
Signed-off-by: Cong Wang <cong.wang@bytedance.com>
Signed-off-by: Peilin Ye <peilin.ye@bytedance.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Do not update tunnel->tun_hlen in data plane code. Use a local variable
instead, just like "tunnel_hlen" in net/ipv4/ip_gre.c:gre_fb_xmit().
Co-developed-by: Cong Wang <cong.wang@bytedance.com>
Signed-off-by: Cong Wang <cong.wang@bytedance.com>
Signed-off-by: Peilin Ye <peilin.ye@bytedance.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Steffen Klassert says:
====================
pull request (net): ipsec 2022-04-14
1) Fix the output interface for VRF cases in xfrm_dst_lookup.
From David Ahern.
2) Fix write out of bounds by doing COW on esp output when the
packet size is larger than a page.
From Sabrina Dubroca.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Replace kfree_skb() used in ip6_protocol_deliver_rcu() with
kfree_skb_reason().
No new reasons are added.
Some paths are ignored, as they are not common, such as encapsulation
on non-final protocol.
Signed-off-by: Menglong Dong <imagedong@tencent.com>
Reviewed-by: Jiang Biao <benbjiang@tencent.com>
Reviewed-by: Hao Peng <flyingpeng@tencent.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Replace kfree_skb() used in ip6_rcv_core() with kfree_skb_reason().
No new drop reasons are added.
Seems now we use 'SKB_DROP_REASON_IP_INHDR' for too many case during
ipv6 header parse or check, just like what 'IPSTATS_MIB_INHDRERRORS'
do. Will it be too general and hard to know what happened?
Signed-off-by: Menglong Dong <imagedong@tencent.com>
Reviewed-by: Jiang Biao <benbjiang@tencent.com>
Reviewed-by: Hao Peng <flyingpeng@tencent.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Replace kfree_skb() used in TLV encoded option header parsing with
kfree_skb_reason(). Following functions are involved:
ip6_parse_tlv()
ipv6_hop_ra()
ipv6_hop_ioam()
ipv6_hop_jumbo()
ipv6_hop_calipso()
ipv6_dest_hao()
Most skb drops during this process are regarded as 'InHdrErrors',
as 'IPSTATS_MIB_INHDRERRORS' is used when ip6_parse_tlv() fails,
which make we use 'SKB_DROP_REASON_IP_INHDR' correspondingly.
However, 'IP_INHDR' is a relatively general reason. Therefore, we
can use other reasons with higher priority in some cases. For example,
'SKB_DROP_REASON_UNHANDLED_PROTO' is used for unknown TLV options.
Signed-off-by: Menglong Dong <imagedong@tencent.com>
Reviewed-by: Jiang Biao <benbjiang@tencent.com>
Reviewed-by: Hao Peng <flyingpeng@tencent.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There are two call chains for ipv6_hop_jumbo(). The first one is:
ipv6_destopt_rcv() -> ip6_parse_tlv() -> ipv6_hop_jumbo()
On this call chain, the drop statistics will be done in
ipv6_destopt_rcv() with 'IPSTATS_MIB_INHDRERRORS' if ipv6_hop_jumbo()
returns false.
The second call chain is:
ip6_rcv_core() -> ipv6_parse_hopopts() -> ip6_parse_tlv()
And the drop statistics will also be done in ip6_rcv_core() with
'IPSTATS_MIB_INHDRERRORS' if ipv6_hop_jumbo() returns false.
Therefore, the statistics in ipv6_hop_jumbo() is redundant, which
means the drop is counted twice. The statistics in ipv6_hop_jumbo()
is almost the same as the outside, except the
'IPSTATS_MIB_INTRUNCATEDPKTS', which seems that we have to ignore it.
Signed-off-by: Menglong Dong <imagedong@tencent.com>
Reviewed-by: Jiang Biao <benbjiang@tencent.com>
Reviewed-by: Hao Peng <flyingpeng@tencent.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In order to add the skb drop reasons support to icmpv6_param_prob(),
introduce the function icmpv6_param_prob_reason() and make
icmpv6_param_prob() an inline call to it. This new function will be
used in the following patches.
Signed-off-by: Menglong Dong <imagedong@tencent.com>
Reviewed-by: Jiang Biao <benbjiang@tencent.com>
Reviewed-by: Hao Peng <flyingpeng@tencent.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Replace kfree_skb() which is used in ip6_forward() and ip_forward()
with kfree_skb_reason().
The new drop reason 'SKB_DROP_REASON_PKT_TOO_BIG' is introduced for
the case that the length of the packet exceeds MTU and can't
fragment.
Signed-off-by: Menglong Dong <imagedong@tencent.com>
Reviewed-by: Jiang Biao <benbjiang@tencent.com>
Reviewed-by: Hao Peng <flyingpeng@tencent.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Replace kfree_skb() used in ip6_pkt_drop() with kfree_skb_reason().
No new reason is added.
Signed-off-by: Menglong Dong <imagedong@tencent.com>
Reviewed-by: Jiang Biao <benbjiang@tencent.com>
Reviewed-by: Hao Peng <flyingpeng@tencent.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Address the following coccicheck warning:
net/ipv6/exthdrs.c:620:44-45: WARNING opportunity for swap()
by using swap() for the swapping of variable values and drop
the tmp (`addr`) variable that is not needed any more.
Signed-off-by: Guo Zhengkui <guozhengkui@vivo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit ebe48d368e ("esp: Fix possible buffer overflow in ESP
transformation") tried to fix skb_page_frag_refill usage in ESP by
capping allocsize to 32k, but that doesn't completely solve the issue,
as skb_page_frag_refill may return a single page. If that happens, we
will write out of bounds, despite the check introduced in the previous
patch.
This patch forces COW in cases where we would end up calling
skb_page_frag_refill with a size larger than a page (first in
esp_output_head with tailen, then in esp_output_tail with
skb->data_len).
Fixes: cac2661c53 ("esp4: Avoid skb_cow_data whenever possible")
Fixes: 03e2a30f6a ("esp6: Avoid skb_cow_data whenever possible")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
The internal recvmsg() functions have two parameters 'flags' and 'noblock'
that were merged inside skb_recv_datagram(). As a follow up patch to commit
f4b41f062c ("net: remove noblock parameter from skb_recv_datagram()")
this patch removes the separate 'noblock' parameter for recvmsg().
Analogue to the referenced patch for skb_recv_datagram() the 'flags' and
'noblock' parameters are unnecessarily split up with e.g.
err = sk->sk_prot->recvmsg(sk, msg, size, flags & MSG_DONTWAIT,
flags & ~MSG_DONTWAIT, &addr_len);
or in
err = INDIRECT_CALL_2(sk->sk_prot->recvmsg, tcp_recvmsg, udp_recvmsg,
sk, msg, size, flags & MSG_DONTWAIT,
flags & ~MSG_DONTWAIT, &addr_len);
instead of simply using only flags all the time and check for MSG_DONTWAIT
where needed (to preserve for the formerly separated no(n)block condition).
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Link: https://lore.kernel.org/r/20220411124955.154876-1-socketcan@hartkopp.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
kongweibin reported a kernel panic in ip6_forward() when input interface
has no in6 dev associated.
The following tc commands were used to reproduce this panic:
tc qdisc del dev vxlan100 root
tc qdisc add dev vxlan100 root netem corrupt 5%
CC: stable@vger.kernel.org
Fixes: ccd27f05ae ("ipv6: fix 'disable_policy' for fwd packets")
Reported-by: kongweibin <kongweibin2@huawei.com>
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pablo Neira Ayuso says:
====================
Netfilter updates for net-next
The following patchset contains Netfilter updates for net-next:
1) Replace unnecessary list_for_each_entry_continue() in nf_tables,
from Jakob Koschel.
2) Add struct nf_conntrack_net_ecache to conntrack event cache and
use it, from Florian Westphal.
3) Refactor ctnetlink_dump_list(), also from Florian.
4) Bump module reference counter on cttimeout object addition/removal,
from Florian.
5) Consolidate nf_log MAC printer, from Phil Sutter.
6) Add basic logging support for unknown ethertype, from Phil Sutter.
7) Consolidate check for sysctl nf_log_all_netns toggle, also from Phil.
8) Replace hardcode value in nft_bitwise, from Jeremy Sowden.
9) Rename BASIC-like goto tags in nft_bitwise to more meaningful names,
also from Jeremy.
10) nft_fib support for reverse path filtering with policy-based routing
on iif. Extend selftests to cover for this new usecase, from Florian.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
If policy-based routing using the iif selector is used, then the fib
expression fails to look up for the reverse path from the prerouting
hook because the input interface cannot be inferred. In order to support
this scenario, extend the fib expression to allow to use after the route
lookup, from the forward hook.
This patch also adds support for the input hook for usability reasons.
Since the prerouting hook cannot be used for the scenario described
above, users need two rules: one for the forward chain and another rule
for the input chain to check for the reverse path check for locally
targeted traffic.
Acked-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Replace kfree_skb() used in icmp_rcv() and icmpv6_rcv() with
kfree_skb_reason().
In order to get the reasons of the skb drops after icmp message handle,
we change the return type of 'handler()' in 'struct icmp_control' from
'bool' to 'enum skb_drop_reason'. This may change its original
intention, as 'false' means failure, but 'SKB_NOT_DROPPED_YET' means
success now. Therefore, all 'handler' and the call of them need to be
handled. Following 'handler' functions are involved:
icmp_unreach()
icmp_redirect()
icmp_echo()
icmp_timestamp()
icmp_discard()
And following new drop reasons are added:
SKB_DROP_REASON_ICMP_CSUM
SKB_DROP_REASON_INVALID_PROTO
The reason 'INVALID_PROTO' is introduced for the case that the packet
doesn't follow rfc 1122 and is dropped. This is not a common case, and
I believe we can locate the problem from the data in the packet. For now,
this 'INVALID_PROTO' is used for the icmp broadcasts with wrong types.
Maybe there should be a document file for these reasons. For example,
list all the case that causes the 'UNHANDLED_PROTO' and 'INVALID_PROTO'
drop reason. Therefore, users can locate their problems according to the
document.
Reviewed-by: Hao Peng <flyingpeng@tencent.com>
Reviewed-by: Jiang Biao <benbjiang@tencent.com>
Signed-off-by: Menglong Dong <imagedong@tencent.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Increment rx_otherhost_dropped counter when packet dropped due to
mismatched dest MAC addr.
An example when this drop can occur is when manually crafting raw
packets that will be consumed by a user space application via a tap
device. For testing purposes local traffic was generated using trafgen
for the client and netcat to start a server
Tested: Created 2 netns, sent 1 packet using trafgen from 1 to the other
with "{eth(daddr=$INCORRECT_MAC...}", verified that iproute2 showed the
counter was incremented. (Also had to modify iproute2 to show the stat,
additional patch for that coming next.)
Signed-off-by: Jeffrey Ji <jeffreyji@google.com>
Reviewed-by: Brian Vazquez <brianvv@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20220406172600.1141083-1-jeffreyjilinux@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
idev->addr_list needs to be protected by idev->lock. However, it is not
always possible to do so while iterating and performing actions on
inet6_ifaddr instances. For example, multiple functions (like
addrconf_{join,leave}_anycast) eventually call down to other functions
that acquire the idev->lock. The current code temporarily unlocked the
idev->lock during the loops, which can cause race conditions. Moving the
locks up is also not an appropriate solution as the ordering of lock
acquisition will be inconsistent with for example mc_lock.
This solution adds an additional field to inet6_ifaddr that is used
to temporarily add the instances to a temporary list while holding
idev->lock. The temporary list can then be traversed without holding
idev->lock. This change was done in two places. In addrconf_ifdown, the
list_for_each_entry_safe variant of the list loop is also no longer
necessary as there is no deletion within that specific loop.
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Niels Dossche <dossche.niels@gmail.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Link: https://lore.kernel.org/r/20220403231523.45843-1-dossche.niels@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We had various bugs over the years with code
breaking the assumption that tp->snd_cwnd is greater
than zero.
Lately, syzbot reported the WARN_ON_ONCE(!tp->prior_cwnd) added
in commit 8b8a321ff7 ("tcp: fix zero cwnd in tcp_cwnd_reduction")
can trigger, and without a repro we would have to spend
considerable time finding the bug.
Instead of complaining too late, we want to catch where
and when tp->snd_cwnd is set to an illegal value.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Suggested-by: Yuchung Cheng <ycheng@google.com>
Cc: Neal Cardwell <ncardwell@google.com>
Acked-by: Yuchung Cheng <ycheng@google.com>
Link: https://lore.kernel.org/r/20220405233538.947344-1-eric.dumazet@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There is a same action when the variable is initialized
Signed-off-by: Hongbin Wang <wh_bin@126.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
net/ipv6/ip6mr.c:1656:14: warning: unused variable 'do_wrmifwhole'
Move it to the CONFIG_IPV6_PIMSM_V2 scope where its used.
Fixes: 4b340a5a72 ("net: ip6mr: add support for passing full packet on wrong mif")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
skb_recv_datagram() has two parameters 'flags' and 'noblock' that are
merged inside skb_recv_datagram() by 'flags | (noblock ? MSG_DONTWAIT : 0)'
As 'flags' may contain MSG_DONTWAIT as value most callers split the 'flags'
into 'flags' and 'noblock' with finally obsolete bit operations like this:
skb_recv_datagram(sk, flags & ~MSG_DONTWAIT, flags & MSG_DONTWAIT, &rc);
And this is not even done consistently with the 'flags' parameter.
This patch removes the obsolete and costly splitting into two parameters
and only performs bit operations when really needed on the caller side.
One missing conversion thankfully reported by kernel test robot. I missed
to enable kunit tests to build the mctp code.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
VRF devices are the loopbacks for VRFs, and a loopback can not be
assigned to a VRF. Accordingly, the condition in ip6_pkt_drop should
be '||' not '&&'.
Fixes: 1d3fd8a10b ("vrf: Use orig netdev to count Ip6InNoRoutes and a fresh route lookup when sending dest unreach")
Reported-by: Pudak, Filip <Filip.Pudak@windriver.com>
Reported-by: Xiao, Jiguang <Jiguang.Xiao@windriver.com>
Signed-off-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20220404150908.2937-1-dsahern@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The fib expression stores to a register, so we can't add empty stub.
Check that the register that is being written is in fact redundant.
In most cases, this is expected to cancel tracking as re-use is
unlikely.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Skip register tracking for expressions that perform read-only operations
on the registers. Define and use a cookie pointer NFT_REDUCE_READONLY to
avoid defining stubs for these expressions.
This patch re-enables register tracking which was disabled in ed5f85d422
("netfilter: nf_tables: disable register tracking"). Follow up patches
add remaining register tracking for existing expressions.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Steffen Klassert says:
====================
pull request (net): ipsec 2022-03-16
1) Fix a kernel-info-leak in pfkey.
From Haimin Zhang.
2) Fix an incorrect check of the return value of ipv6_skip_exthdr.
From Sabrina Dubroca.
* 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec:
esp6: fix check on ipv6_skip_exthdr's return value
af_key: add __GFP_ZERO flag for compose_sadb_supported in function pfkey_register
====================
Link: https://lore.kernel.org/r/20220316121142.3142336-1-steffen.klassert@secunet.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The fundamental premise of VRF and l3mdev core code is binding a socket
to a device (l3mdev or netdev with an L3 domain) to indicate L3 scope.
Legacy code resets flowi_oif to the l3mdev losing any original port
device binding. Ben (among others) has demonstrated use cases where the
original port device binding is important and needs to be retained.
This patch handles that by adding a new entry to the common flow struct
that can indicate the l3mdev index for later rule and table matching
avoiding the need to reset flowi_oif.
In addition to allowing more use cases that require port device binds,
this patch brings a few datapath simplications:
1. l3mdev_fib_rule_match is only called when walking fib rules and
always after l3mdev_update_flow. That allows an optimization to bail
early for non-VRF type uses cases when flowi_l3mdev is not set. Also,
only that index needs to be checked for the FIB table id.
2. l3mdev_update_flow can be called with flowi_oif set to a l3mdev
(e.g., VRF) device. By resetting flowi_oif only for this case the
FLOWI_FLAG_SKIP_NH_OIF flag is not longer needed and can be removed,
removing several checks in the datapath. The flowi_iif path can be
simplified to only be called if the it is not loopback (loopback can
not be assigned to an L3 domain) and the l3mdev index is not already
set.
3. Avoid another device lookup in the output path when the fib lookup
returns a reject failure.
Note: 2 functional tests for local traffic with reject fib rules are
updated to reflect the new direct failure at FIB lookup time for ping
rather than the failure on packet path. The current code fails like this:
HINT: Fails since address on vrf device is out of device scope
COMMAND: ip netns exec ns-A ping -c1 -w1 -I eth1 172.16.3.1
ping: Warning: source address might be selected on device other than: eth1
PING 172.16.3.1 (172.16.3.1) from 172.16.3.1 eth1: 56(84) bytes of data.
--- 172.16.3.1 ping statistics ---
1 packets transmitted, 0 received, 100% packet loss, time 0ms
where the test now directly fails:
HINT: Fails since address on vrf device is out of device scope
COMMAND: ip netns exec ns-A ping -c1 -w1 -I eth1 172.16.3.1
ping: connect: No route to host
Signed-off-by: David Ahern <dsahern@kernel.org>
Tested-by: Ben Greear <greearb@candelatech.com>
Link: https://lore.kernel.org/r/20220314204551.16369-1-dsahern@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit 5f9c55c806 ("ipv6: check return value of ipv6_skip_exthdr")
introduced an incorrect check, which leads to all ESP packets over
either TCPv6 or UDPv6 encapsulation being dropped. In this particular
case, offset is negative, since skb->data points to the ESP header in
the following chain of headers, while skb->network_header points to
the IPv6 header:
IPv6 | ext | ... | ext | UDP | ESP | ...
That doesn't seem to be a problem, especially considering that if we
reach esp6_input_done2, we're guaranteed to have a full set of headers
available (otherwise the packet would have been dropped earlier in the
stack). However, it means that the return value will (intentionally)
be negative. We can make the test more specific, as the expected
return value of ipv6_skip_exthdr will be the (negated) size of either
a UDP header, or a TCP header with possible options.
In the future, we should probably either make ipv6_skip_exthdr
explicitly accept negative offsets (and adjust its return value for
error cases), or make ipv6_skip_exthdr only take non-negative
offsets (and audit all callers).
Fixes: 5f9c55c806 ("ipv6: check return value of ipv6_skip_exthdr")
Reported-by: Xiumei Mu <xmu@redhat.com>
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Steffen Klassert says:
====================
pull request (net): ipsec 2022-03-09
1) Fix IPv6 PMTU discovery for xfrm interfaces.
From Lina Wang.
2) Revert failing for policies and states that are
configured with XFRMA_IF_ID 0. It broke a
user configuration. From Kai Lueke.
3) Fix a possible buffer overflow in the ESP output path.
4) Fix ESP GSO for tunnel and BEET mode on inter address
family tunnels.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
We have a number of cases where function returns drop/no drop
decision as a boolean. Now that we want to report the reason
code as well we have to pass extra output arguments.
We can make the reason code evaluate correctly as bool.
I believe we're good to reorder the reasons as they are
reported to user space as strings.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The esp tunnel GSO handlers use skb_mac_gso_segment to
push the inner packet to the segmentation handlers.
However, skb_mac_gso_segment takes the Ethernet Protocol
ID from 'skb->protocol' which is wrong for inter address
family tunnels. We fix this by introducing a new
skb_eth_gso_segment function.
This function can be used if it is necessary to pass the
Ethernet Protocol ID directly to the segmentation handler.
First users of this function will be the esp4 and esp6
tunnel segmentation handlers.
Fixes: c35fe4106b ("xfrm: Add mode handlers for IPsec on layer 2")
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
The xfrm{4,6}_beet_gso_segment() functions did not correctly set the
SKB_GSO_IPXIP4 and SKB_GSO_IPXIP6 gso types for the address family
tunneling case. Fix this by setting these gso types.
Fixes: 384a46ea7b ("esp4: add gso_segment for esp4 beet mode")
Fixes: 7f9e40eb18 ("esp6: add gso_segment for esp6 beet mode")
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
The maximum message size that can be send is bigger than
the maximum site that skb_page_frag_refill can allocate.
So it is possible to write beyond the allocated buffer.
Fix this by doing a fallback to COW in that case.
v2:
Avoid get get_order() costs as suggested by Linus Torvalds.
Fixes: cac2661c53 ("esp4: Avoid skb_cow_data whenever possible")
Fixes: 03e2a30f6a ("esp6: Avoid skb_cow_data whenever possible")
Reported-by: valis <sec@valis.email>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
While investigating on why a synchronize_net() has been added recently
in ipv6_mc_down(), I found that igmp6_event_query() and igmp6_event_report()
might drop skbs in some cases.
Discussion about removing synchronize_net() from ipv6_mc_down()
will happen in a different thread.
Fixes: f185de28d9 ("mld: add new workqueues for process mld events")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Taehee Yoo <ap420073@gmail.com>
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Cc: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20220303173728.937869-1-eric.dumazet@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The previous patches handled the delivery_time in the ingress path
before the routing decision is made. This patch can postpone clearing
delivery_time in a skb until knowing it is delivered locally and also
set the (rcv) timestamp if needed. This patch moves the
skb_clear_delivery_time() from dev.c to ip_local_deliver_finish()
and ip6_input_finish().
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
IOAM is a hop-by-hop option with a temporary iana allocation (49).
Since it is hop-by-hop, it is done before the input routing decision.
One of the traced data field is the (rcv) timestamp.
When the locally generated skb is looping from egress to ingress over
a virtual interface (e.g. veth, loopback...), skb->tstamp may have the
delivery time before it is known that it will be delivered locally
and received by another sk.
Like handling the network tapping (tcpdump) in the earlier patch,
this patch gets the timestamp if needed without over-writing the
delivery_time in the skb->tstamp. skb_tstamp_cond() is added to do the
ktime_get_real() with an extra cond arg to check on top of the
netstamp_needed_key static key. skb_tstamp_cond() will also be used in
a latter patch and it needs the netstamp_needed_key check.
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
A latter patch will postpone the delivery_time clearing until the stack
knows the skb is being delivered locally (i.e. calling
skb_clear_delivery_time() at ip_local_deliver_finish() for IPv4
and at ip6_input_finish() for IPv6). That will allow other kernel
forwarding path (e.g. ip[6]_forward) to keep the delivery_time also.
A very similar IPv6 defrag codes have been duplicated in
multiple places: regular IPv6, nf_conntrack, and 6lowpan.
Unlike the IPv4 defrag which is done before ip_local_deliver_finish(),
the regular IPv6 defrag is done after ip6_input_finish().
Thus, no change should be needed in the regular IPv6 defrag
logic because skb_clear_delivery_time() should have been called.
6lowpan also does not need special handling on delivery_time
because it is a non-inet packet_type.
However, cf_conntrack has a case in NF_INET_PRE_ROUTING that needs
to do the IPv6 defrag earlier. Thus, it needs to save the
mono_delivery_time bit in the inet_frag_queue which is similar
to how it is handled in the previous patch for the IPv4 defrag.
This patch chooses to do it consistently and stores the mono_delivery_time
in the inet_frag_queue for all cases such that it will be easier
for the future refactoring effort on the IPv6 reasm code.
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Right now, skb->tstamp is reset to 0 whenever the skb is forwarded.
If skb->tstamp has the mono delivery_time, clearing it can hurt
the performance when it finally transmits out to fq@phy-dev.
The earlier patch added a skb->mono_delivery_time bit to
flag the skb->tstamp carrying the mono delivery_time.
This patch adds skb_clear_tstamp() helper which keeps
the mono delivery_time and clears everything else.
The delivery_time clearing will be postponed until the stack knows the
skb will be delivered locally. It will be done in a latter patch.
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
skb->tstamp was first used as the (rcv) timestamp.
The major usage is to report it to the user (e.g. SO_TIMESTAMP).
Later, skb->tstamp is also set as the (future) delivery_time (e.g. EDT in TCP)
during egress and used by the qdisc (e.g. sch_fq) to make decision on when
the skb can be passed to the dev.
Currently, there is no way to tell skb->tstamp having the (rcv) timestamp
or the delivery_time, so it is always reset to 0 whenever forwarded
between egress and ingress.
While it makes sense to always clear the (rcv) timestamp in skb->tstamp
to avoid confusing sch_fq that expects the delivery_time, it is a
performance issue [0] to clear the delivery_time if the skb finally
egress to a fq@phy-dev. For example, when forwarding from egress to
ingress and then finally back to egress:
tcp-sender => veth@netns => veth@hostns => fq@eth0@hostns
^ ^
reset rest
This patch adds one bit skb->mono_delivery_time to flag the skb->tstamp
is storing the mono delivery_time (EDT) instead of the (rcv) timestamp.
The current use case is to keep the TCP mono delivery_time (EDT) and
to be used with sch_fq. A latter patch will also allow tc-bpf@ingress
to read and change the mono delivery_time.
In the future, another bit (e.g. skb->user_delivery_time) can be added
for the SCM_TXTIME where the clock base is tracked by sk->sk_clockid.
[ This patch is a prep work. The following patches will
get the other parts of the stack ready first. Then another patch
after that will finally set the skb->mono_delivery_time. ]
skb_set_delivery_time() function is added. It is used by the tcp_output.c
and during ip[6] fragmentation to assign the delivery_time to
the skb->tstamp and also set the skb->mono_delivery_time.
A note on the change in ip_send_unicast_reply() in ip_output.c.
It is only used by TCP to send reset/ack out of a ctl_sk.
Like the new skb_set_delivery_time(), this patch sets
the skb->mono_delivery_time to 0 for now as a place
holder. It will be enabled in a latter patch.
A similar case in tcp_ipv6 can be done with
skb_set_delivery_time() in tcp_v6_send_response().
[0] (slide 22): https://linuxplumbersconf.org/event/11/contributions/953/attachments/867/1658/LPC_2021_BPF_Datapath_Extensions.pdf
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
in tunnel mode, if outer interface(ipv4) is less, it is easily to let
inner IPV6 mtu be less than 1280. If so, a Packet Too Big ICMPV6 message
is received. When send again, packets are fragmentized with 1280, they
are still rejected with ICMPV6(Packet Too Big) by xfrmi_xmit2().
According to RFC4213 Section3.2.2:
if (IPv4 path MTU - 20) is less than 1280
if packet is larger than 1280 bytes
Send ICMPv6 "packet too big" with MTU=1280
Drop packet
else
Encapsulate but do not set the Don't Fragment
flag in the IPv4 header. The resulting IPv4
packet might be fragmented by the IPv4 layer
on the encapsulator or by some router along
the IPv4 path.
endif
else
if packet is larger than (IPv4 path MTU - 20)
Send ICMPv6 "packet too big" with
MTU = (IPv4 path MTU - 20).
Drop packet.
else
Encapsulate and set the Don't Fragment flag
in the IPv4 header.
endif
endif
Packets should be fragmentized with ipv4 outer interface, so change it.
After it is fragemtized with ipv4, there will be double fragmenation.
No.48 & No.51 are ipv6 fragment packets, No.48 is double fragmentized,
then tunneled with IPv4(No.49& No.50), which obey spec. And received peer
cannot decrypt it rightly.
48 2002::10 2002::11 1296(length) IPv6 fragment (off=0 more=y ident=0xa20da5bc nxt=50)
49 0x0000 (0) 2002::10 2002::11 1304 IPv6 fragment (off=0 more=y ident=0x7448042c nxt=44)
50 0x0000 (0) 2002::10 2002::11 200 ESP (SPI=0x00035000)
51 2002::10 2002::11 180 Echo (ping) request
52 0x56dc 2002::10 2002::11 248 IPv6 fragment (off=1232 more=n ident=0xa20da5bc nxt=50)
xfrm6_noneed_fragment has fixed above issues. Finally, it acted like below:
1 0x6206 192.168.1.138 192.168.1.1 1316 Fragmented IP protocol (proto=Encap Security Payload 50, off=0, ID=6206) [Reassembled in #2]
2 0x6206 2002::10 2002::11 88 IPv6 fragment (off=0 more=y ident=0x1f440778 nxt=50)
3 0x0000 2002::10 2002::11 248 ICMPv6 Echo (ping) request
Signed-off-by: Lina Wang <lina.wang@mediatek.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
There are two reasons for addrconf_notify() to be called with NETDEV_DOWN:
either the network device is actually going down, or IPv6 was disabled
on the interface.
If either of them stays down while the other is toggled, we repeatedly
call the code for NETDEV_DOWN, including ipv6_mc_down(), while never
calling the corresponding ipv6_mc_up() in between. This will cause a
new entry in idev->mc_tomb to be allocated for each multicast group
the interface is subscribed to, which in turn leaks one struct ifmcaddr6
per nontrivial multicast group the interface is subscribed to.
The following reproducer will leak at least $n objects:
ip addr add ff2e::4242/32 dev eth0 autojoin
sysctl -w net.ipv6.conf.eth0.disable_ipv6=1
for i in $(seq 1 $n); do
ip link set up eth0; ip link set down eth0
done
Joining groups with IPV6_ADD_MEMBERSHIP (unprivileged) or setting the
sysctl net.ipv6.conf.eth0.forwarding to 1 (=> subscribing to ff02::2)
can also be used to create a nontrivial idev->mc_list, which will the
leak objects with the right up-down-sequence.
Based on both sources for NETDEV_DOWN events the interface IPv6 state
should be considered:
- not ready if the network interface is not ready OR IPv6 is disabled
for it
- ready if the network interface is ready AND IPv6 is enabled for it
The functions ipv6_mc_up() and ipv6_down() should only be run when this
state changes.
Implement this by remembering when the IPv6 state is ready, and only
run ipv6_mc_down() if it actually changed from ready to not ready.
The other direction (not ready -> ready) already works correctly, as:
- the interface notification triggered codepath for NETDEV_UP /
NETDEV_CHANGE returns early if ipv6 is disabled, and
- the disable_ipv6=0 triggered codepath skips fully initializing the
interface as long as addrconf_link_ready(dev) returns false
- calling ipv6_mc_up() repeatedly does not leak anything
Fixes: 3ce62a84d5 ("ipv6: exit early in addrconf_notify() if IPv6 is disabled")
Signed-off-by: Johannes Nixdorf <j.nixdorf@avm.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Replace kfree_skb() which is used in the packet egress path of IP layer
with kfree_skb_reason(). Functions that are involved include:
__ip_queue_xmit()
ip_finish_output()
ip_mc_finish_output()
ip6_output()
ip6_finish_output()
ip6_finish_output2()
Following new drop reasons are introduced:
SKB_DROP_REASON_IP_OUTNOROUTES
SKB_DROP_REASON_BPF_CGROUP_EGRESS
SKB_DROP_REASON_IPV6DISABLED
SKB_DROP_REASON_NEIGH_CREATEFAIL
Reviewed-by: Mengen Sun <mengensun@tencent.com>
Reviewed-by: Hao Peng <flyingpeng@tencent.com>
Signed-off-by: Menglong Dong <imagedong@tencent.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Steffen Klassert says:
====================
1) Fix PMTU for IPv6 if the reported MTU minus the ESP overhead is
smaller than 1280. From Jiri Bohac.
2) Fix xfrm interface ID and inter address family tunneling when
migrating xfrm states. From Yan Yan.
3) Add missing xfrm intrerface ID initialization on xfrmi_changelink.
From Antony Antony.
4) Enforce validity of xfrm offload input flags so that userspace can't
send undefined flags to the offload driver.
From Leon Romanovsky.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The functions do essentially the same work to verify TCP-MD5 sign.
Code can be merged into one family-independent function in order to
reduce copy'n'paste and generated code.
Later with TCP-AO option added, this will allow to create one function
that's responsible for segment verification, that will have all the
different checks for MD5/AO/non-signed packets, which in turn will help
to see checks for all corner-cases in one function, rather than spread
around different families and functions.
Cc: Eric Dumazet <edumazet@google.com>
Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org>
Signed-off-by: Dmitry Safonov <dima@arista.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20220223175740.452397-1-dima@arista.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
valid_lft, prefered_lft and tstamp are always accessed under the lock
"lock" in other places. Reading these without taking the lock may result
in inconsistencies regarding the calculation of the valid and preferred
variables since decisions are taken on these fields for those variables.
Signed-off-by: Niels Dossche <dossche.niels@gmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Niels Dossche <niels.dossche@ugent.be>
Link: https://lore.kernel.org/r/20220223131954.6570-1-niels.dossche@ugent.be
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
All other skbs allocated for TCP tx are using MAX_TCP_HEADER already.
MAX_HEADER can be too small for some cases (like eBPF based encapsulation),
so this can avoid extra pskb_expand_head() in lower stacks.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20220222031115.4005060-1-eric.dumazet@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch separate NS message allocation steps from ndisc_send_ns(),
so it could be used in other places, like bonding, to allocate and
send IPv6 NS message.
Also export ndisc_send_skb() and ndisc_ns_create() for later bonding usage.
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We encounter a tcp drop issue in our cloud environment. Packet GROed in
host forwards to a VM virtio_net nic with net_failover enabled. VM acts
as a IPVS LB with ipip encapsulation. The full path like:
host gro -> vm virtio_net rx -> net_failover rx -> ipvs fullnat
-> ipip encap -> net_failover tx -> virtio_net tx
When net_failover transmits a ipip pkt (gso_type = 0x0103, which means
SKB_GSO_TCPV4, SKB_GSO_DODGY and SKB_GSO_IPXIP4), there is no gso
did because it supports TSO and GSO_IPXIP4. But network_header points to
inner ip header.
Call Trace:
tcp4_gso_segment ------> return NULL
inet_gso_segment ------> inner iph, network_header points to
ipip_gso_segment
inet_gso_segment ------> outer iph
skb_mac_gso_segment
Afterwards virtio_net transmits the pkt, only inner ip header is modified.
And the outer one just keeps unchanged. The pkt will be dropped in remote
host.
Call Trace:
inet_gso_segment ------> inner iph, outer iph is skipped
skb_mac_gso_segment
__skb_gso_segment
validate_xmit_skb
validate_xmit_skb_list
sch_direct_xmit
__qdisc_run
__dev_queue_xmit ------> virtio_net
dev_hard_start_xmit
__dev_queue_xmit ------> net_failover
ip_finish_output2
ip_output
iptunnel_xmit
ip_tunnel_xmit
ipip_tunnel_xmit ------> ipip
dev_hard_start_xmit
__dev_queue_xmit
ip_finish_output2
ip_output
ip_forward
ip_rcv
__netif_receive_skb_one_core
netif_receive_skb_internal
napi_gro_receive
receive_buf
virtnet_poll
net_rx_action
The root cause of this issue is specific with the rare combination of
SKB_GSO_DODGY and a tunnel device that adds an SKB_GSO_ tunnel option.
SKB_GSO_DODGY is set from external virtio_net. We need to reset network
header when callbacks.gso_segment() returns NULL.
This patch also includes ipv6_gso_segment(), considering SIT, etc.
Fixes: cb32f511a7 ("ipip: add GSO/TSO support")
Signed-off-by: Tao Liu <thomas.liu@ucloud.cn>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Replace kfree_skb() used in tcp_v4_do_rcv() and tcp_v6_do_rcv() with
kfree_skb_reason().
Reviewed-by: Mengen Sun <mengensun@tencent.com>
Reviewed-by: Hao Peng <flyingpeng@tencent.com>
Signed-off-by: Menglong Dong <imagedong@tencent.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pass the address of drop_reason to tcp_add_backlog() to store the
reasons for skb drops when fails. Following drop reasons are
introduced:
SKB_DROP_REASON_SOCKET_BACKLOG
Reviewed-by: Mengen Sun <mengensun@tencent.com>
Reviewed-by: Hao Peng <flyingpeng@tencent.com>
Signed-off-by: Menglong Dong <imagedong@tencent.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pass the address of drop reason to tcp_v4_inbound_md5_hash() and
tcp_v6_inbound_md5_hash() to store the reasons for skb drops when this
function fails. Therefore, the drop reason can be passed to
kfree_skb_reason() when the skb needs to be freed.
Following drop reasons are added:
SKB_DROP_REASON_TCP_MD5NOTFOUND
SKB_DROP_REASON_TCP_MD5UNEXPECTED
SKB_DROP_REASON_TCP_MD5FAILURE
SKB_DROP_REASON_TCP_MD5* above correspond to LINUX_MIB_TCPMD5*
Reviewed-by: Mengen Sun <mengensun@tencent.com>
Reviewed-by: Hao Peng <flyingpeng@tencent.com>
Signed-off-by: Menglong Dong <imagedong@tencent.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Replace kfree_skb() used in tcp_v6_rcv() with kfree_skb_reason().
Reviewed-by: Mengen Sun <mengensun@tencent.com>
Reviewed-by: Hao Peng <flyingpeng@tencent.com>
Signed-off-by: Menglong Dong <imagedong@tencent.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds support for MRT6MSG_WRMIFWHOLE which is used to pass
full packet and real vif id when the incoming interface is wrong.
While the RP and FHR are setting up state we need to be sending the
registers encapsulated with all the data inside otherwise we lose it.
The RP then decapsulates it and forwards it to the interested parties.
Currently with WRONGMIF we can only be sending empty register packets
and will lose that data.
This behaviour can be enabled by using MRT_PIM with
val == MRT6MSG_WRMIFWHOLE. This doesn't prevent MRT6MSG_WRONGMIF from
happening, it happens in addition to it, also it is controlled by the same
throttling parameters as WRONGMIF (i.e. 1 packet per 3 seconds currently).
Both messages are generated to keep backwards compatibily and avoid
breaking someone who was enabling MRT_PIM with val == 4, since any
positive val is accepted and treated the same.
Signed-off-by: Mobashshera Rasool <mobash.rasool.linux@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds a new protocol attribute to IPv4 and IPv6 addresses.
Inspiration was taken from the protocol attribute of routes. User space
applications like iproute2 can set/get the protocol with the Netlink API.
The attribute is stored as an 8-bit unsigned integer.
The protocol attribute is set by kernel for these categories:
- IPv4 and IPv6 loopback addresses
- IPv6 addresses generated from router announcements
- IPv6 link local addresses
User space may pass custom protocols, not defined by the kernel.
Grouping addresses on their origin is useful in scenarios where you want
to distinguish between addresses based on who added them, e.g. kernel
vs. user space.
Tagging addresses with a string label is an existing feature that could be
used as a solution. Unfortunately the max length of a label is
15 characters, and for compatibility reasons the label must be prefixed
with the name of the device followed by a colon. Since device names also
have a max length of 15 characters, only -1 characters is guaranteed to be
available for any origin tag, which is not that much.
A reference implementation of user space setting and getting protocols
is available for iproute2:
9a6ea18bd7
Signed-off-by: Jacques de Laval <Jacques.De.Laval@westermo.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20220217150202.80802-1-Jacques.De.Laval@westermo.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
IPv6 has this hack changing sk->sk_prot when an IPv6 socket
is 'converted' to an IPv4 one with IPV6_ADDRFORM option.
This operation is only performed for TCP and UDP, knowing
their 'struct proto' for the two network families are populated
in the same way, and can not disappear while a reader
might use and dereference sk->sk_prot.
If we think about it all reads of sk->sk_prot while
either socket lock or RTNL is not acquired should be using READ_ONCE().
Also note that other layers like MPTCP, XFRM, CHELSIO_TLS also
write over sk->sk_prot.
BUG: KCSAN: data-race in inet6_recvmsg / ipv6_setsockopt
write to 0xffff8881386f7aa8 of 8 bytes by task 26932 on cpu 0:
do_ipv6_setsockopt net/ipv6/ipv6_sockglue.c:492 [inline]
ipv6_setsockopt+0x3758/0x3910 net/ipv6/ipv6_sockglue.c:1019
udpv6_setsockopt+0x85/0x90 net/ipv6/udp.c:1649
sock_common_setsockopt+0x5d/0x70 net/core/sock.c:3489
__sys_setsockopt+0x209/0x2a0 net/socket.c:2180
__do_sys_setsockopt net/socket.c:2191 [inline]
__se_sys_setsockopt net/socket.c:2188 [inline]
__x64_sys_setsockopt+0x62/0x70 net/socket.c:2188
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x44/0xd0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x44/0xae
read to 0xffff8881386f7aa8 of 8 bytes by task 26911 on cpu 1:
inet6_recvmsg+0x7a/0x210 net/ipv6/af_inet6.c:659
____sys_recvmsg+0x16c/0x320
___sys_recvmsg net/socket.c:2674 [inline]
do_recvmmsg+0x3f5/0xae0 net/socket.c:2768
__sys_recvmmsg net/socket.c:2847 [inline]
__do_sys_recvmmsg net/socket.c:2870 [inline]
__se_sys_recvmmsg net/socket.c:2863 [inline]
__x64_sys_recvmmsg+0xde/0x160 net/socket.c:2863
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x44/0xd0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x44/0xae
value changed: 0xffffffff85e0e980 -> 0xffffffff85e01580
Reported by Kernel Concurrency Sanitizer on:
CPU: 1 PID: 26911 Comm: syz-executor.3 Not tainted 5.17.0-rc2-syzkaller-00316-g0457e5153e0e-dirty #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
UDP sendmsg() can be lockless, this is causing all kinds
of data races.
This patch converts sk->sk_tskey to remove one of these races.
BUG: KCSAN: data-race in __ip_append_data / __ip_append_data
read to 0xffff8881035d4b6c of 4 bytes by task 8877 on cpu 1:
__ip_append_data+0x1c1/0x1de0 net/ipv4/ip_output.c:994
ip_make_skb+0x13f/0x2d0 net/ipv4/ip_output.c:1636
udp_sendmsg+0x12bd/0x14c0 net/ipv4/udp.c:1249
inet_sendmsg+0x5f/0x80 net/ipv4/af_inet.c:819
sock_sendmsg_nosec net/socket.c:705 [inline]
sock_sendmsg net/socket.c:725 [inline]
____sys_sendmsg+0x39a/0x510 net/socket.c:2413
___sys_sendmsg net/socket.c:2467 [inline]
__sys_sendmmsg+0x267/0x4c0 net/socket.c:2553
__do_sys_sendmmsg net/socket.c:2582 [inline]
__se_sys_sendmmsg net/socket.c:2579 [inline]
__x64_sys_sendmmsg+0x53/0x60 net/socket.c:2579
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x44/0xd0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x44/0xae
write to 0xffff8881035d4b6c of 4 bytes by task 8880 on cpu 0:
__ip_append_data+0x1d8/0x1de0 net/ipv4/ip_output.c:994
ip_make_skb+0x13f/0x2d0 net/ipv4/ip_output.c:1636
udp_sendmsg+0x12bd/0x14c0 net/ipv4/udp.c:1249
inet_sendmsg+0x5f/0x80 net/ipv4/af_inet.c:819
sock_sendmsg_nosec net/socket.c:705 [inline]
sock_sendmsg net/socket.c:725 [inline]
____sys_sendmsg+0x39a/0x510 net/socket.c:2413
___sys_sendmsg net/socket.c:2467 [inline]
__sys_sendmmsg+0x267/0x4c0 net/socket.c:2553
__do_sys_sendmmsg net/socket.c:2582 [inline]
__se_sys_sendmmsg net/socket.c:2579 [inline]
__x64_sys_sendmmsg+0x53/0x60 net/socket.c:2579
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x44/0xd0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x44/0xae
value changed: 0x0000054d -> 0x0000054e
Reported by Kernel Concurrency Sanitizer on:
CPU: 0 PID: 8880 Comm: syz-executor.5 Not tainted 5.17.0-rc2-syzkaller-00167-gdcb85f85fa6f-dirty #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Fixes: 09c2d251b7 ("net-timestamp: add key to disambiguate concurrent datagrams")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Willem de Bruijn <willemb@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Before freeing the hash table in addrconf_exit_net(),
we need to make sure the work queue has completed,
or risk NULL dereference or UAF.
Thus, use cancel_delayed_work_sync() to enforce this.
We do not hold RTNL in addrconf_exit_net(), making this safe.
Fixes: 8805d13ff1 ("ipv6/addrconf: use one delayed work per netns")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20220216182037.3742-1-eric.dumazet@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Support setting IPV6_HOPLIMIT, IPV6_TCLASS, IPV6_DONTFRAG
during sendmsg via SOL_IPV6 cmsgs.
tclass and dontfrag are init'ed from struct ipv6_pinfo in
ipcm6_init_sk(), while hlimit is inited to -1, so we need
to handle it being populated via cmsg explicitly.
Leave extension headers and flowlabel unimplemented.
Those are slightly more laborious to test and users
seem to primarily care about IPV6_TCLASS.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ipv6 flowlabels historically require a reservation before use.
Optionally in exclusive mode (e.g., user-private).
Commit 59c820b231 ("ipv6: elide flowlabel check if no exclusive
leases exist") introduced a fastpath that avoids this check when no
exclusive leases exist in the system, and thus any flowlabel use
will be granted.
That allows skipping the control operation to reserve a flowlabel
entirely. Though with a warning if the fast path fails:
This is an optimization. Robust applications still have to revert to
requesting leases if the fast path fails due to an exclusive lease.
Still, this is subtle. Better isolate network namespaces from each
other. Flowlabels are per-netns. Also record per-netns whether
exclusive leases are in use. Then behavior does not change based on
activity in other netns.
Changes
v2
- wrap in IS_ENABLED(CONFIG_IPV6) to avoid breakage if disabled
Fixes: 59c820b231 ("ipv6: elide flowlabel check if no exclusive leases exist")
Link: https://lore.kernel.org/netdev/MWHPR2201MB1072BCCCFCE779E4094837ACD0329@MWHPR2201MB1072.namprd22.prod.outlook.com/
Reported-by: Congyu Liu <liu3101@purdue.edu>
Signed-off-by: Willem de Bruijn <willemb@google.com>
Tested-by: Congyu Liu <liu3101@purdue.edu>
Link: https://lore.kernel.org/r/20220215160037.1976072-1-willemdebruijn.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Whenever rt6_uncached_list_flush_dev() swaps rt->rt6_idev
to the blackhole device, parts of IPv6 stack might still need
to increment one SNMP counter.
Root cause, patch from Ido, changelog from Eric :)
This bug suggests that we need to audit rt->rt6_idev usages
and make sure they are properly using RCU protection.
Fixes: e5f80fcf86 ("ipv6: give an IPv6 dev to blackhole_netdev")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add reasons to __udp6_lib_rcv for skb drops. The only twist is that the
NO_SOCKET takes precedence over the CSUM or other counters for that
path (motivation behind this patch - csum counter was misleading).
Signed-off-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Generate RTM_NEWROUTE netlink notification when the route preference
changes on an existing kernel generated default route in response to
RA messages. Currently netlink notifications are generated only when
this route is added or deleted but not when the route preference
changes, which can cause userspace routing application state to go
out of sync with kernel.
Signed-off-by: Kalash Nainwal <kalash@arista.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
This is an optimization to keep the per-cpu lists as short as possible:
Whenever rt6_uncached_list_flush_dev() changes one rt6_info
matching the disappearing device, it can can transfer the object
to a quarantine list, waiting for a final rt6_uncached_list_del().
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
IPv6 addrconf notifiers wants the loopback device to
be the last device being dismantled at netns deletion.
This caused many limitations and work arounds.
Back in linux-5.3, Mahesh added a per host blackhole_netdev
that can be used whenever we need to make sure objects no longer
refer to a disappearing device.
If we attach to blackhole_netdev an ip6_ptr (allocate an idev),
then we can use this special device (which is never freed)
in place of the loopback_dev (which can be freed).
This will permit improvements in netdev_run_todo() and other parts
of the stack where had steps to make sure loopback_dev was
the last device to disappear.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Mahesh Bandewar <maheshb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This counter has never been visible, there is little point
trying to maintain it.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The ->rtm_tos option is normally used to route packets based on both
the destination address and the DS field. However it's ignored for
IPv6 routes. Setting ->rtm_tos for IPv6 is thus invalid as the route
is going to work only on the destination address anyway, so it won't
behave as specified.
Suggested-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Minor reordering of the code and a call to sock_cmsg_send()
gives us support for setting the common socket options via
cmsg (the usual ones - SO_MARK, SO_TIMESTAMPING_OLD, SCM_TXTIME).
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Nothing prevents the user from requesting timestamping
on ping6 sockets, yet timestamps are not going to be reported.
Plumb the flags through.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
We have ftrace and BPF today, there's no need for printing arguments
at the start of a function.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit
9652dc2eb9 ("tcp: relax listening_hash operations")
removed the need to disable bottom half while acquiring
listening_hash.lock. There are still two callers left which disable
bottom half before the lock is acquired.
On PREEMPT_RT the softirqs are preemptible and local_bh_disable() acts
as a lock to ensure that resources, that are protected by disabling
bottom halves, remain protected.
This leads to a circular locking dependency if the lock acquired with
disabled bottom halves is also acquired with enabled bottom halves
followed by disabling bottom halves. This is the reverse locking order.
It has been observed with inet_listen_hashbucket:🔒
local_bh_disable() + spin_lock(&ilb->lock):
inet_listen()
inet_csk_listen_start()
sk->sk_prot->hash() := inet_hash()
local_bh_disable()
__inet_hash()
spin_lock(&ilb->lock);
acquire(&ilb->lock);
Reverse order: spin_lock(&ilb2->lock) + local_bh_disable():
tcp_seq_next()
listening_get_next()
spin_lock(&ilb2->lock);
acquire(&ilb2->lock);
tcp4_seq_show()
get_tcp4_sock()
sock_i_ino()
read_lock_bh(&sk->sk_callback_lock);
acquire(softirq_ctrl) // <---- whoops
acquire(&sk->sk_callback_lock)
Drop local_bh_disable() around __inet_hash() which acquires
listening_hash->lock. Split inet_unhash() and acquire the
listen_hashbucket lock without disabling bottom halves; the inet_ehash
lock with disabled bottom halves.
Reported-by: Mike Galbraith <efault@gmx.de>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://lkml.kernel.org/r/12d6f9879a97cd56c09fb53dee343cbb14f7f1f7.camel@gmx.de
Link: https://lkml.kernel.org/r/X9CheYjuXWc75Spa@hirez.programming.kicks-ass.net
Link: https://lore.kernel.org/r/YgQOebeZ10eNx1W6@linutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
cleanup_net() is competing with other rtnl users.
Avoiding to acquire rtnl for each netns before calling
ip6mr_rules_exit() gives chance for cleanup_net()
to progress much faster, holding rtnl a bit longer.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
cleanup_net() is competing with other rtnl users.
fib6_rules_net_exit() seems a good candidate for exit_batch(),
as this gives chance for cleanup_net() to progress much faster,
holding rtnl a bit longer.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
IPv6 does not scale very well with the number of IPv6 addresses.
It uses a global (shared by all netns) hash table with 256 buckets.
Some functions like addrconf_verify_rtnl() and addrconf_ifdown()
have to iterate all addresses in the hash table.
I have seen addrconf_verify_rtnl() holding the cpu for 10ms or more.
Switch to the per netns hashtable (and spinlock) added
in prior patches.
This considerably speeds up netns dismantle times on hosts
with thousands of netns. This also has an impact
on regular (fast path) IPv6 processing.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Next step for using per netns inet6_addr_lst
is to have per netns work item to ultimately
call addrconf_verify_rtnl() and addrconf_verify()
with a new 'struct net*' argument.
Everything is still using the global inet6_addr_lst[] table.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a per netns hash table and a dedicated spinlock,
first step to get rid of the global inet6_addr_lst[] one.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Define a dscp_t type and its appropriate helpers that ensure ECN bits
are not taken into account when handling DSCP.
Use this new type to replace the tclass field of struct fib6_rule, so
that fib6-rules don't get influenced by ECN bits anymore.
Before this patch, fib6-rules didn't make any distinction between the
DSCP and ECN bits. Therefore, rules specifying a DSCP (tos or dsfield
options in iproute2) stopped working as soon a packets had at least one
of its ECN bits set (as a work around one could create four rules for
each DSCP value to match, one for each possible ECN value).
After this patch fib6-rules only compare the DSCP bits. ECN doesn't
influence the result anymore. Also, fib6-rules now must have the ECN
bits cleared or they will be rejected.
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Acked-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In many cases, ip6mr_sk_done() is called while no ipmr socket
has been registered.
This removes 4 rtnl acquisitions per netns dismantle,
with following callers:
igmp6_net_exit(), tcpv6_net_exit(), ndisc_net_exit()
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This fixes minor data-races in ip6_mc_input() and
batadv_mcast_mla_rtr_flags_softif_get_ipv6()
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add support for the IOAM insertion frequency inside its lwtunnel output
function. This patch introduces a new (atomic) counter for packets,
based on which the algorithm will decide if IOAM should be added or not.
Default frequency is "1/1" (i.e., applied to all packets) for backward
compatibility. The iproute2 patch is ready and will be submitted as soon
as this one is accepted.
Previous iproute2 command:
ip -6 ro ad fc00::1/128 encap ioam6 [ mode ... ] ...
New iproute2 command:
ip -6 ro ad fc00::1/128 encap ioam6 [ freq k/n ] [ mode ... ] ...
Signed-off-by: Justin Iurman <justin.iurman@uliege.be>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Inline a part of ipv6_fixup_options() to avoid extra overhead on
function call if opt is NULL.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
udpv6_sendmsg() doesn't need dst after calling ip6_make_skb(), so
instead of taking an additional reference inside ip6_setup_cork()
and releasing the initial one afterwards, we can hand over a reference
into ip6_make_skb() saving two atomics. The only other user of
ip6_setup_cork() is ip6_append_data() and it requires an extra
dst_hold().
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
udpv6_sendmsg() first initialises an on-stack 88B struct flowi6 and then
copies it into cork, which is expensive. Avoid the copy in corkless case
by initialising on-stack cork->fl directly.
The main part is a couple of lines under !corkreq check. The rest
converts fl6 variable to be a pointer.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Another preparation patch. inet_cork_full already contains a field for
iflow, so we can avoid passing a separate struct iflow6 into
__ip6_append_data() and ip6_make_skb(), and use the flow stored in
inet_cork_full. Make sure callers set cork->fl, i.e. we init it in
ip6_append_data() and before calling ip6_make_skb().
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Convert a struct inet_cork argument in __ip6_append_data() to struct
inet_cork_full. As one struct contains another inet_cork is still can
be accessed via ->base field. It's a preparation patch making further
changes a bit cleaner.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
It doesn't appear there is any reason for ip6_cork_release() to zero
cork->fl, it'll be fully filled on next initialisation. This 88 bytes
memset accounts to 0.3-0.5% of total CPU cycles.
It's also needed in following patches and allows to remove an extar flow
copy in udp_v6_push_pending_frames().
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Clean up ip6_setup_cork() and ip6_cork_release() adding a local variable
for v6_cork->opt. It's a preparation patch for further changes.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ipv6_push_nfrag_opts() doesn't change passed daddr, and so
__ip6_make_skb() doesn't actually need to keep an on-stack copy of
fl6->daddr. Set initially final_dst to fl6->daddr,
ipv6_push_nfrag_opts() will override it if needed, and get rid of extra
copies.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Corked AF_INET for ipv6 socket doesn't appear to be the hottest case,
so move it out of the common path under up->pending check to remove
overhead.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
__ip6_make_skb() gets a cork->dst ref, hands it over to skb and shortly
after puts cork->dst. Save two atomics by stealing it without extra
referencing, ip6_cork_release() handles NULL cork->dst.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
1) Remove leftovers from flowtable modules, from Geert Uytterhoeven.
2) Missing refcount increment of conntrack template in nft_ct,
from Florian Westphal.
3) Reduce nft_zone selftest time, also from Florian.
4) Add selftest to cover stateless NAT on fragments, from Florian Westphal.
5) Do not set net_device when for reject packets from the bridge path,
from Phil Sutter.
6) Cancel register tracking info on nft_byteorder operations.
7) Extend nft_concat_range selftest to cover set reload with no elements,
from Florian Westphal.
8) Remove useless update of pointer in chain blob builder, reported
by kbuild test robot.
* git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf:
netfilter: nf_tables: remove assignment with no effect in chain blob builder
selftests: nft_concat_range: add test for reload with no element add/del
netfilter: nft_byteorder: track register operations
netfilter: nft_reject_bridge: Fix for missing reply from prerouting
selftests: netfilter: check stateless nat udp checksum fixup
selftests: netfilter: reduce zone stress test running time
netfilter: nft_ct: fix use after free when attaching zone template
netfilter: Remove flowtable relics
====================
Link: https://lore.kernel.org/r/20220127235235.656931-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This reverts commit b75326c201.
This commit breaks Linux compatibility with USGv6 tests. The RFC this
commit was based on is actually an expired draft: no published RFC
currently allows the new behaviour it introduced.
Without full IETF endorsement, the flash renumbering scenario this
patch was supposed to enable is never going to work, as other IPv6
equipements on the same LAN will keep the 2 hours limit.
Fixes: b75326c201 ("ipv6: Honor all IPv6 PIO Valid Lifetime values")
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This reverts commit b515d26372.
Commit b515d26372 ("xfrm: xfrm_state_mtu
should return at least 1280 for ipv6") in v5.14 breaks the TCP MSS
calculation in ipsec transport mode, resulting complete stalls of TCP
connections. This happens when the (P)MTU is 1280 or slighly larger.
The desired formula for the MSS is:
MSS = (MTU - ESP_overhead) - IP header - TCP header
However, the above commit clamps the (MTU - ESP_overhead) to a
minimum of 1280, turning the formula into
MSS = max(MTU - ESP overhead, 1280) - IP header - TCP header
With the (P)MTU near 1280, the calculated MSS is too large and the
resulting TCP packets never make it to the destination because they
are over the actual PMTU.
The above commit also causes suboptimal double fragmentation in
xfrm tunnel mode, as described in
https://lore.kernel.org/netdev/20210429202529.codhwpc7w6kbudug@dwarf.suse.cz/
The original problem the above commit was trying to fix is now fixed
by commit 6596a02295 ("xfrm: fix MTU
regression").
Signed-off-by: Jiri Bohac <jbohac@suse.cz>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
NF_FLOW_TABLE_IPV4 and NF_FLOW_TABLE_IPV6 are invisble, selected by
nothing (so they can no longer be enabled), and their last real users
have been removed (nf_flow_table_ipv6.c is empty).
Clean up the leftovers.
Fixes: c42ba4290b ("netfilter: flowtable: remove ipv4/ipv6 modules")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
IPv6 GRO considers packets to belong to different flows when their
hop_limit is different. This seems counter-intuitive, the flow is
the same. hop_limit may vary because of various bugs or hacks but
that doesn't mean it's okay for GRO to reorder packets.
Practical impact of this problem on overall TCP performance
is unclear, but TCP itself detects this reordering and bumps
TCPSACKReorder resulting in user complaints.
Eric warns that there may be performance regressions in setups
which do packet spraying across links with similar RTT but different
hop count. To be safe let's target -next and not treat this
as a fix. If the packet spraying is using flow label there should
be no difference in behavior as flow label is checked first.
Note that the code plays an easy to miss trick by upcasting next_hdr
to a u16 pointer and compares next_hdr and hop_limit in one go.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Back in linux-2.6.25 (commit 98c6d1b261 "[NETNS]: Make icmpv6_sk per namespace.",
we added private per-cpu/per-netns ipv6 icmp sockets.
This adds memory and cpu costs, which do not seem needed.
Now typical servers have 256 or more cores, this adds considerable
tax to netns users.
icmp sockets are used from BH context, are not receiving packets,
and do not store any persistent state but the 'struct net' pointer.
icmpv6_xmit_lock() already makes sure to lock the chosen per-cpu
socket.
This patch has a considerable impact on the number of netns
that the worker thread in cleanup_net() can dismantle per second,
because ip6mr_sk_done() is no longer called, meaning we no longer
acquire the rtnl mutex, competing with other threads adding new netns.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Prior patches in the series made sure tw_timer_handler()
can be fired after netns has been dismantled/freed.
We no longer have to scan a potentially big TCP ehash
table at netns dismantle.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since IPv4 routes support IPv6 gateways now, we can route IPv4 traffic in
NBMA tunnels.
Signed-off-by: Qing Deng <i@moy.cat>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit 749439bfac ("ipv6: fix udpv6
sendmsg crash caused by too small MTU") breaks PMTU for xfrm.
A Packet Too Big ICMPv6 message received in response to an ESP
packet will prevent all further communication through the tunnel
if the reported MTU minus the ESP overhead is smaller than 1280.
E.g. in a case of a tunnel-mode ESP with sha256/aes the overhead
is 92 bytes. Receiving a PTB with MTU of 1371 or less will result
in all further packets in the tunnel dropped. A ping through the
tunnel fails with "ping: sendmsg: Invalid argument".
Apparently the MTU on the xfrm route is smaller than 1280 and
fails the check inside ip6_setup_cork() added by 749439bf.
We found this by debugging USGv6/ipv6ready failures. Failing
tests are: "Phase-2 Interoperability Test Scenario IPsec" /
5.3.11 and 5.4.11 (Tunnel Mode: Fragmentation).
Commit b515d26372 ("xfrm:
xfrm_state_mtu should return at least 1280 for ipv6") attempted
to fix this but caused another regression in TCP MSS calculations
and had to be reverted.
The patch below fixes the situation by dropping the MTU
check and instead checking for the underflows described in the
749439bf commit message.
Signed-off-by: Jiri Bohac <jbohac@suse.cz>
Fixes: 749439bfac ("ipv6: fix udpv6 sendmsg crash caused by too small MTU")
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
The warning messages can be invoked from the data path for every packet
transmitted through an ip6gre netdev, leading to high CPU utilization.
Fix that by rate limiting the messages.
Fixes: 09c6bbf090 ("[IPV6]: Do mandatory IPv6 tunnel endpoint checks in realtime")
Reported-by: Maksym Yaremchuk <maksymy@nvidia.com>
Tested-by: Maksym Yaremchuk <maksymy@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Amit Cohen <amcohen@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
While experimenting with FOU encapsulation Amir noticed that encapsulated IPv6
traffic fails to be delivered, if the peer IP address is configured locally.
It can be easily verified by creating a sit interface like below:
$ sudo ip link add name fou_test type sit remote 127.0.0.1 encap fou encap-sport auto encap-dport 1111
$ sudo ip link set fou_test up
and sending some IPv4 and IPv6 traffic to it
$ ping -I fou_test -c 1 1.1.1.1
$ ping6 -I fou_test -c 1 fe80::d0b0:dfff:fe4c:fcbc
"tcpdump -i any udp dst port 1111" will confirm that only the first IPv4 ping
was encapsulated and attempted to be delivered.
This seems like a limitation: for example, in a cloud environment the "peer"
service may be arbitrarily scheduled on any server within the cluster, where all
nodes are trying to send encapsulated traffic. And the unlucky node will not be
able to. Moreover, delivering encapsulated IPv4 traffic locally is allowed.
But I may not have all the context about this restriction and this code predates
the observable git history.
Reported-by: Amir Razmjou <arazmjou@cloudflare.com>
Signed-off-by: Ignat Korchagin <ignat@cloudflare.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20220107123842.211335-1-ignat@cloudflare.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pablo Neira Ayuso says:
====================
Netfilter updates for net-next
The following patchset contains Netfilter updates for net-next. This
includes one patch to update ovs and act_ct to use nf_ct_put() instead
of nf_conntrack_put().
1) Add netns_tracker to nfnetlink_log and masquerade, from Eric Dumazet.
2) Remove redundant rcu read-size lock in nf_tables packet path.
3) Replace BUG() by WARN_ON_ONCE() in nft_payload.
4) Consolidate rule verdict tracing.
5) Replace WARN_ON() by WARN_ON_ONCE() in nf_tables core.
6) Make counter support built-in in nf_tables.
7) Add new field to conntrack object to identify locally generated
traffic, from Florian Westphal.
8) Prevent NAT from shadowing well-known ports, from Florian Westphal.
9) Merge nf_flow_table_{ipv4,ipv6} into nf_flow_table_inet, also from
Florian.
10) Remove redundant pointer in nft_pipapo AVX2 support, from Colin Ian King.
11) Replace opencoded max() in conntrack, from Jiapeng Chong.
12) Update conntrack to use refcount_t API, from Florian Westphal.
13) Move ip_ct_attach indirection into the nf_ct_hook structure.
14) Constify several pointer object in the netfilter codebase,
from Florian Westphal.
15) Tree-wide replacement of nf_conntrack_put() by nf_ct_put(), also
from Florian.
16) Fix egress splat due to incorrect rcu notation, from Florian.
17) Move stateful fields of connlimit, last, quota, numgen and limit
out of the expression data area.
18) Build a blob to represent the ruleset in nf_tables, this is a
requirement of the new register tracking infrastructure.
19) Add NFT_REG32_NUM to define the maximum number of 32-bit registers.
20) Add register tracking infrastructure to skip redundant
store-to-register operations, this includes support for payload,
meta and bitwise expresssions.
* git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf-next: (32 commits)
netfilter: nft_meta: cancel register tracking after meta update
netfilter: nft_payload: cancel register tracking after payload update
netfilter: nft_bitwise: track register operations
netfilter: nft_meta: track register operations
netfilter: nft_payload: track register operations
netfilter: nf_tables: add register tracking infrastructure
netfilter: nf_tables: add NFT_REG32_NUM
netfilter: nf_tables: add rule blob layout
netfilter: nft_limit: move stateful fields out of expression data
netfilter: nft_limit: rename stateful structure
netfilter: nft_numgen: move stateful fields out of expression data
netfilter: nft_quota: move stateful fields out of expression data
netfilter: nft_last: move stateful fields out of expression data
netfilter: nft_connlimit: move stateful fields out of expression data
netfilter: egress: avoid a lockdep splat
net: prefer nf_ct_put instead of nf_conntrack_put
netfilter: conntrack: avoid useless indirection during conntrack destruction
netfilter: make function op structures const
netfilter: core: move ip_ct_attach indirection to struct nf_ct_hook
netfilter: conntrack: convert to refcount_t api
...
====================
Link: https://lore.kernel.org/r/20220109231640.104123-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Alexei Starovoitov says:
====================
pull-request: bpf-next 2022-01-06
We've added 41 non-merge commits during the last 2 day(s) which contain
a total of 36 files changed, 1214 insertions(+), 368 deletions(-).
The main changes are:
1) Various fixes in the verifier, from Kris and Daniel.
2) Fixes in sockmap, from John.
3) bpf_getsockopt fix, from Kuniyuki.
4) INET_POST_BIND fix, from Menglong.
5) arm64 JIT fix for bpf pseudo funcs, from Hou.
6) BPF ISA doc improvements, from Christoph.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (41 commits)
bpf: selftests: Add bind retry for post_bind{4, 6}
bpf: selftests: Use C99 initializers in test_sock.c
net: bpf: Handle return value of BPF_CGROUP_RUN_PROG_INET{4,6}_POST_BIND()
bpf/selftests: Test bpf_d_path on rdonly_mem.
libbpf: Add documentation for bpf_map batch operations
selftests/bpf: Don't rely on preserving volatile in PT_REGS macros in loop3
xdp: Add xdp_do_redirect_frame() for pre-computed xdp_frames
xdp: Move conversion to xdp_frame out of map functions
page_pool: Store the XDP mem id
page_pool: Add callback to init pages when they are allocated
xdp: Allow registering memory model without rxq reference
samples/bpf: xdpsock: Add timestamp for Tx-only operation
samples/bpf: xdpsock: Add time-out for cleaning Tx
samples/bpf: xdpsock: Add sched policy and priority support
samples/bpf: xdpsock: Add cyclic TX operation capability
samples/bpf: xdpsock: Add clockid selection support
samples/bpf: xdpsock: Add Dest and Src MAC setting for Tx-only operation
samples/bpf: xdpsock: Add VLAN support for Tx-only operation
libbpf 1.0: Deprecate bpf_object__find_map_by_offset() API
libbpf 1.0: Deprecate bpf_map__is_offload_neutral()
...
====================
Link: https://lore.kernel.org/r/20220107013626.53943-1-alexei.starovoitov@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The return value of BPF_CGROUP_RUN_PROG_INET{4,6}_POST_BIND() in
__inet_bind() is not handled properly. While the return value
is non-zero, it will set inet_saddr and inet_rcv_saddr to 0 and
exit:
err = BPF_CGROUP_RUN_PROG_INET4_POST_BIND(sk);
if (err) {
inet->inet_saddr = inet->inet_rcv_saddr = 0;
goto out_release_sock;
}
Let's take UDP for example and see what will happen. For UDP
socket, it will be added to 'udp_prot.h.udp_table->hash' and
'udp_prot.h.udp_table->hash2' after the sk->sk_prot->get_port()
called success. If 'inet->inet_rcv_saddr' is specified here,
then 'sk' will be in the 'hslot2' of 'hash2' that it don't belong
to (because inet_saddr is changed to 0), and UDP packet received
will not be passed to this sock. If 'inet->inet_rcv_saddr' is not
specified here, the sock will work fine, as it can receive packet
properly, which is wired, as the 'bind()' is already failed.
To undo the get_port() operation, introduce the 'put_port' field
for 'struct proto'. For TCP proto, it is inet_put_port(); For UDP
proto, it is udp_lib_unhash(); For icmp proto, it is
ping_unhash().
Therefore, after sys_bind() fail caused by
BPF_CGROUP_RUN_PROG_INET4_POST_BIND(), it will be unbinded, which
means that it can try to be binded to another port.
Signed-off-by: Menglong Dong <imagedong@tencent.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220106132022.3470772-2-imagedong@tencent.com
Steffen Klassert says:
====================
pull request (net): ipsec 2022-01-06
1) Fix xfrm policy lookups for ipv6 gre packets by initializing
fl6_gre_key properly. From Ghalem Boudour.
2) Fix the dflt policy check on forwarding when there is no
policy configured. The check was done for the wrong direction.
From Nicolas Dichtel.
3) Use the correct 'struct xfrm_user_offload' when calculating
netlink message lenghts in xfrm_sa_len(). From Eric Dumazet.
4) Tread inserting xfrm interface id 0 as an error.
From Antony Antony.
5) Fail if xfrm state or policy is inserted with XFRMA_IF_ID 0,
xfrm interfaces with id 0 are not allowed.
From Antony Antony.
6) Fix inner_ipproto setting in the sec_path for tunnel mode.
From Raed Salem.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Steffen Klassert says:
====================
pull request (net-next): ipsec-next 2022-01-06
1) Fix some clang_analyzer warnings about never read variables.
From luo penghao.
2) Check for pols[0] only once in xfrm_expand_policies().
From Jean Sacren.
3) The SA curlft.use_time was updated only on SA cration time.
Update whenever the SA is used. From Antony Antony
4) Add support for SM3 secure hash.
From Xu Jia.
5) Add support for SM4 symmetric cipher algorithm.
From Xu Jia.
6) Add a rate limit for SA mapping change messages.
From Antony Antony.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
When finding the socket to report an error on, if the invoking packet
is using Segment Routing, the IPv6 destination address is that of an
intermediate router, not the end destination. Extract the ultimate
destination address from the segment address.
This change allows traceroute to function in the presence of Segment
Routing.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
RFC8754 says:
ICMP error packets generated within the SR domain are sent to source
nodes within the SR domain. The invoking packet in the ICMP error
message may contain an SRH. Since the destination address of a packet
with an SRH changes as each segment is processed, it may not be the
destination used by the socket or application that generated the
invoking packet.
For the source of an invoking packet to process the ICMP error
message, the ultimate destination address of the IPv6 header may be
required. The following logic is used to determine the destination
address for use by protocol-error handlers.
* Walk all extension headers of the invoking IPv6 packet to the
routing extension header preceding the upper-layer header.
- If routing header is type 4 Segment Routing Header (SRH)
o The SID at Segment List[0] may be used as the destination
address of the invoking packet.
Mangle the skb so the network header points to the invoking packet
inside the ICMP packet. The seg6 helpers can then be used on the skb
to find any segment routing headers. If found, mark this fact in the
IPv6 control block of the skb, and store the offset into the packet of
the SRH. Then restore the skb back to its old state.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
An ICMP error message can contain in its message body part of an IPv6
packet which invoked the error. Such a packet might contain a segment
router header. Export get_srh() so the ICMP code can make use of it.
Since his changes the scope of the function from local to global, add
the seg6_ prefix to keep the namespace clean. And move it into seg6.c
so it is always available, not just when IPV6_SEG6_LWTUNNEL is
enabled.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
As Nicolas noted, if gateway validation fails walking the multipath
attribute the code should jump to the cleanup to free previously
allocated memory.
Fixes: 1ff15a710a ("ipv6: Check attribute length for RTA_GATEWAY when deleting multipath route")
Signed-off-by: David Ahern <dsahern@kernel.org>
Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Link: https://lore.kernel.org/r/20220103170555.94638-1-dsahern@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ip6_route_multipath_del loop continues processing the multipath
attribute even if delete of a nexthop path fails. For consistency,
do the same if the gateway attribute is invalid.
Fixes: 1ff15a710a ("ipv6: Check attribute length for RTA_GATEWAY when deleting multipath route")
Signed-off-by: David Ahern <dsahern@kernel.org>
Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Link: https://lore.kernel.org/r/20220103171911.94739-1-dsahern@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
v3:
- Report 'backlog' (bytes) instead of 'qlen' (number of packets)
v2:
- Fix sparse warning (use rcu_dereference)
This patch adds support for the queue depth in IOAM trace data fields.
The draft [1] says the following:
The "queue depth" field is a 4-octet unsigned integer field. This
field indicates the current length of the egress interface queue of
the interface from where the packet is forwarded out. The queue
depth is expressed as the current amount of memory buffers used by
the queue (a packet could consume one or more memory buffers,
depending on its size).
An existing function (i.e., qdisc_qstats_qlen_backlog) is used to
retrieve the current queue length without reinventing the wheel.
Note: it was tested and qlen is increasing when an artificial delay is
added on the egress with tc.
[1] https://datatracker.ietf.org/doc/html/draft-ietf-ippm-ioam-data#section-5.4.2.7
Signed-off-by: Justin Iurman <justin.iurman@uliege.be>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Alexei Starovoitov says:
====================
pull-request: bpf-next 2021-12-30
The following pull-request contains BPF updates for your *net-next* tree.
We've added 72 non-merge commits during the last 20 day(s) which contain
a total of 223 files changed, 3510 insertions(+), 1591 deletions(-).
The main changes are:
1) Automatic setrlimit in libbpf when bpf is memcg's in the kernel, from Andrii.
2) Beautify and de-verbose verifier logs, from Christy.
3) Composable verifier types, from Hao.
4) bpf_strncmp helper, from Hou.
5) bpf.h header dependency cleanup, from Jakub.
6) get_func_[arg|ret|arg_cnt] helpers, from Jiri.
7) Sleepable local storage, from KP.
8) Extend kfunc with PTR_TO_CTX, PTR_TO_MEM argument support, from Kumar.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
lwtunnel_valid_encap_type_attr is used to validate encap attributes
within a multipath route. Add length validation checking to the type.
lwtunnel_valid_encap_type_attr is called converting attributes to
fib{6,}_config struct which means it is used before fib_get_nhs,
ip6_route_multipath_add, and ip6_route_multipath_del - other
locations that use rtnh_ok and then nla_get_u16 on RTA_ENCAP_TYPE
attribute.
Fixes: 9ed59592e3 ("lwtunnel: fix autoload of lwt modules")
Signed-off-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Make sure RTA_GATEWAY for IPv6 multipath route has enough bytes to hold
an IPv6 address.
Fixes: 6b9ea5a64e ("ipv6: fix multipath route replace error recovery")
Signed-off-by: David Ahern <dsahern@kernel.org>
Cc: Roopa Prabhu <roopa@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit referenced in the Fixes tag used nla_memcpy for RTA_GATEWAY as
does the current nla_get_in6_addr. nla_memcpy protects against accessing
memory greater than what is in the attribute, but there is no check
requiring the attribute to have an IPv6 address. Add it.
Fixes: 51ebd31815 ("ipv6: add support of equal cost multipath (ECMP)")
Signed-off-by: David Ahern <dsahern@kernel.org>
Cc: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
drivers/net/ethernet/mellanox/mlx5/core/en_tc.c
commit 077cdda764 ("net/mlx5e: TC, Fix memory leak with rules with internal port")
commit 31108d142f ("net/mlx5: Fix some error handling paths in 'mlx5e_tc_add_fdb_flow()'")
commit 4390c6edc0 ("net/mlx5: Fix some error handling paths in 'mlx5e_tc_add_fdb_flow()'")
https://lore.kernel.org/all/20211229065352.30178-1-saeed@kernel.org/
net/smc/smc_wr.c
commit 49dc9013e3 ("net/smc: Use the bitmap API when applicable")
commit 349d43127d ("net/smc: fix kernel panic caused by race of smc_sock")
bitmap_zero()/memset() is removed by the fix
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a check that the user-provided option is at least as long as the
number of bytes we intend to read. Before this patch we would blindly
read sizeof(int) bytes even in cases where the user passed
optlen<sizeof(int), which would potentially read garbage or fault.
Discovered by new tests in https://github.com/google/gvisor/pull/6957 .
The original get_user call predates history in the git repo.
Signed-off-by: Tamir Duberstein <tamird@gmail.com>
Signed-off-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20211229200947.2862255-1-willemdebruijn.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
sock.h is pretty heavily used (5k objects rebuilt on x86 after
it's touched). We can drop the include of filter.h from it and
add a forward declaration of struct sk_filter instead.
This decreases the number of rebuilt objects when bpf.h
is touched from ~5k to ~1k.
There's a lot of missing includes this was masking. Primarily
in networking tho, this time.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Marc Kleine-Budde <mkl@pengutronix.de>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Acked-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://lore.kernel.org/bpf/20211229004913.513372-1-kuba@kernel.org
The "__ip6_tnl_parm" struct was left uninitialized causing an invalid
load of random data when the "__ip6_tnl_parm" struct was used elsewhere.
As an example, in the function "ip6_tnl_xmit_ctl()", it tries to access
the "collect_md" member. With "__ip6_tnl_parm" being uninitialized and
containing random data, the UBSAN detected that "collect_md" held a
non-boolean value.
The UBSAN issue is as follows:
===============================================================
UBSAN: invalid-load in net/ipv6/ip6_tunnel.c:1025:14
load of value 30 is not a valid value for type '_Bool'
CPU: 1 PID: 228 Comm: kworker/1:3 Not tainted 5.16.0-rc4+ #8
Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
Workqueue: ipv6_addrconf addrconf_dad_work
Call Trace:
<TASK>
dump_stack_lvl+0x44/0x57
ubsan_epilogue+0x5/0x40
__ubsan_handle_load_invalid_value+0x66/0x70
? __cpuhp_setup_state+0x1d3/0x210
ip6_tnl_xmit_ctl.cold.52+0x2c/0x6f [ip6_tunnel]
vti6_tnl_xmit+0x79c/0x1e96 [ip6_vti]
? lock_is_held_type+0xd9/0x130
? vti6_rcv+0x100/0x100 [ip6_vti]
? lock_is_held_type+0xd9/0x130
? rcu_read_lock_bh_held+0xc0/0xc0
? lock_acquired+0x262/0xb10
dev_hard_start_xmit+0x1e6/0x820
__dev_queue_xmit+0x2079/0x3340
? mark_lock.part.52+0xf7/0x1050
? netdev_core_pick_tx+0x290/0x290
? kvm_clock_read+0x14/0x30
? kvm_sched_clock_read+0x5/0x10
? sched_clock_cpu+0x15/0x200
? find_held_lock+0x3a/0x1c0
? lock_release+0x42f/0xc90
? lock_downgrade+0x6b0/0x6b0
? mark_held_locks+0xb7/0x120
? neigh_connected_output+0x31f/0x470
? lockdep_hardirqs_on+0x79/0x100
? neigh_connected_output+0x31f/0x470
? ip6_finish_output2+0x9b0/0x1d90
? rcu_read_lock_bh_held+0x62/0xc0
? ip6_finish_output2+0x9b0/0x1d90
ip6_finish_output2+0x9b0/0x1d90
? ip6_append_data+0x330/0x330
? ip6_mtu+0x166/0x370
? __ip6_finish_output+0x1ad/0xfb0
? nf_hook_slow+0xa6/0x170
ip6_output+0x1fb/0x710
? nf_hook.constprop.32+0x317/0x430
? ip6_finish_output+0x180/0x180
? __ip6_finish_output+0xfb0/0xfb0
? lock_is_held_type+0xd9/0x130
ndisc_send_skb+0xb33/0x1590
? __sk_mem_raise_allocated+0x11cf/0x1560
? dst_output+0x4a0/0x4a0
? ndisc_send_rs+0x432/0x610
addrconf_dad_completed+0x30c/0xbb0
? addrconf_rs_timer+0x650/0x650
? addrconf_dad_work+0x73c/0x10e0
addrconf_dad_work+0x73c/0x10e0
? addrconf_dad_completed+0xbb0/0xbb0
? rcu_read_lock_sched_held+0xaf/0xe0
? rcu_read_lock_bh_held+0xc0/0xc0
process_one_work+0x97b/0x1740
? pwq_dec_nr_in_flight+0x270/0x270
worker_thread+0x87/0xbf0
? process_one_work+0x1740/0x1740
kthread+0x3ac/0x490
? set_kthread_struct+0x100/0x100
ret_from_fork+0x22/0x30
</TASK>
===============================================================
The solution is to initialize "__ip6_tnl_parm" struct to zeros in the
"vti6_siocdevprivate()" function.
Signed-off-by: William Zhao <wizhao@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The max number of UDP gso segments is intended to cap to
UDP_MAX_SEGMENTS, this is checked in udp_send_skb().
skb->len contains network and transport header len here, we should use
only data len instead.
This is the ipv6 counterpart to the below referenced commit,
which missed the ipv6 change
Fixes: 158390e456 ("udp: using datalen to cap max gso segments")
Signed-off-by: Coco Li <lixiaoyan@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20211223222441.2975883-1-lixiaoyan@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We're about to break the cgroup-defs.h -> bpf-cgroup.h dependency,
make sure those who actually need more than the definition of
struct cgroup_bpf include bpf-cgroup.h explicitly.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/bpf/20211216025538.1649516-3-kuba@kernel.org
The attributes are identical in all implementations so move the ipv4 one
into the core and remove the per-family nla policies.
Signed-off-by: Florian Westphal <fw@strlen.de>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
xfrm4_fill_dst() and xfrm6_fill_dst() build dst,
getting a device reference that will likely be released
by standard dst_release() code.
We have to track these references or risk a warning if
CONFIG_NET_DEV_REFCNT_TRACKER=y
Note to XFRM maintainers :
Error path in xfrm6_fill_dst() releases the reference,
but does not clear xdst->u.dst.dev, so I wonder
if this could lead to double dev_put() in some cases,
where a dst_release() _is_ called by the callers in their
error path.
This extra dev_put() was added in commit 84c4a9dfbf ("xfrm6:
release dev before returning error")
Fixes: 9038c32000 ("net: dst: add net device refcount tracking to dst_entry")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Cong Wang <amwang@redhat.com>
Acked-by: Steffen Klassert <steffen.klassert@secunet.com>
Link: https://lore.kernel.org/r/20211207193203.2706158-1-eric.dumazet@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When an IPv4 packet is received, the ip_rcv_core(...) sets the receiving
interface index into the IPv4 socket control block (v5.16-rc4,
net/ipv4/ip_input.c line 510):
IPCB(skb)->iif = skb->skb_iif;
If that IPv4 packet is meant to be encapsulated in an outer IPv6+SRH
header, the seg6_do_srh_encap(...) performs the required encapsulation.
In this case, the seg6_do_srh_encap function clears the IPv6 socket control
block (v5.16-rc4 net/ipv6/seg6_iptunnel.c line 163):
memset(IP6CB(skb), 0, sizeof(*IP6CB(skb)));
The memset(...) was introduced in commit ef489749aa ("ipv6: sr: clear
IP6CB(skb) on SRH ip4ip6 encapsulation") a long time ago (2019-01-29).
Since the IPv6 socket control block and the IPv4 socket control block share
the same memory area (skb->cb), the receiving interface index info is lost
(IP6CB(skb)->iif is set to zero).
As a side effect, that condition triggers a NULL pointer dereference if
commit 0857d6f8c7 ("ipv6: When forwarding count rx stats on the orig
netdev") is applied.
To fix that issue, we set the IP6CB(skb)->iif with the index of the
receiving interface once again.
Fixes: ef489749aa ("ipv6: sr: clear IP6CB(skb) on SRH ip4ip6 encapsulation")
Signed-off-by: Andrea Mayer <andrea.mayer@uniroma2.it>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20211208195409.12169-1-andrea.mayer@uniroma2.it
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Note that other ip_tunnel users do not seem to hold a reference
on tunnel->dev. Probably needs some investigations.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We want to track all dev_hold()/dev_put() to ease leak hunting.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We can remove a bit of code duplication by reusing the new
fib6_nh_release_dsts helper in fib6_nh_release. Their only difference is
that fib6_nh_release's version doesn't use atomic operation to swap the
pointers because it assumes the fib6_nh is no longer visible, while
fib6_nh_release_dsts can be used anywhere.
Suggested-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The kernel leaks memory when a `fib` rule is present in IPv6 nftables
firewall rules and a suppress_prefix rule is present in the IPv6 routing
rules (used by certain tools such as wg-quick). In such scenarios, every
incoming packet will leak an allocation in `ip6_dst_cache` slab cache.
After some hours of `bpftrace`-ing and source code reading, I tracked
down the issue to ca7a03c417 ("ipv6: do not free rt if
FIB_LOOKUP_NOREF is set on suppress rule").
The problem with that change is that the generic `args->flags` always have
`FIB_LOOKUP_NOREF` set[1][2] but the IPv6-specific flag
`RT6_LOOKUP_F_DST_NOREF` might not be, leading to `fib6_rule_suppress` not
decreasing the refcount when needed.
How to reproduce:
- Add the following nftables rule to a prerouting chain:
meta nfproto ipv6 fib saddr . mark . iif oif missing drop
This can be done with:
sudo nft create table inet test
sudo nft create chain inet test test_chain '{ type filter hook prerouting priority filter + 10; policy accept; }'
sudo nft add rule inet test test_chain meta nfproto ipv6 fib saddr . mark . iif oif missing drop
- Run:
sudo ip -6 rule add table main suppress_prefixlength 0
- Watch `sudo slabtop -o | grep ip6_dst_cache` to see memory usage increase
with every incoming ipv6 packet.
This patch exposes the protocol-specific flags to the protocol
specific `suppress` function, and check the protocol-specific `flags`
argument for RT6_LOOKUP_F_DST_NOREF instead of the generic
FIB_LOOKUP_NOREF when decreasing the refcount, like this.
[1]: ca7a03c417/net/ipv6/fib6_rules.c (L71)
[2]: ca7a03c417/net/ipv6/fib6_rules.c (L99)
Link: https://bugzilla.kernel.org/show_bug.cgi?id=215105
Fixes: ca7a03c417 ("ipv6: do not free rt if FIB_LOOKUP_NOREF is set on suppress rule")
Cc: stable@vger.kernel.org
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This is to match ipv4 behaviour, see __ip_sock_set_tos()
implementation.
Technically for ipv6 this might not be required because normally we
do not allow tclass to influence routing, yet the cli tooling does
support it:
lpk11:~# ip -6 rule add pref 5 tos 45 lookup 5
lpk11:~# ip -6 rule
5: from all tos 0x45 lookup 5
and in general dscp/tclass based routing does make sense.
We already have cases where dscp can affect vlan priority and/or
transmit queue (especially on wifi).
So let's just make things match. Easier to reason about and no harm.
Cc: Eric Dumazet <edumazet@google.com>
Cc: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Maciej Żenczykowski <maze@google.com>
Link: https://lore.kernel.org/r/20211123223208.1117871-1-zenczykowski@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This is to match ipv4 behaviour, see __ip_sock_set_tos()
implementation at ipv4/ip_sockglue.c:579
void __ip_sock_set_tos(struct sock *sk, int val)
{
if (sk->sk_type == SOCK_STREAM) {
val &= ~INET_ECN_MASK;
val |= inet_sk(sk)->tos & INET_ECN_MASK;
}
if (inet_sk(sk)->tos != val) {
inet_sk(sk)->tos = val;
sk->sk_priority = rt_tos2priority(val);
sk_dst_reset(sk);
}
}
Cc: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Maciej Żenczykowski <maze@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20211123223154.1117794-1-zenczykowski@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
All gro_complete() handlers are called from napi_gro_complete()
while rcu_read_lock() has been called.
There is no point stacking more rcu_read_lock()
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
All gro_receive() handlers are called from dev_gro_receive()
while rcu_read_lock() has been called.
There is no point stacking more rcu_read_lock()
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
On egress side, xfrm lookup is called from __gre6_xmit() with the
fl6_gre_key field not initialized leading to policies selectors check
failure. Consequently, gre packets are sent without encryption.
On ingress side, INET6_PROTO_NOPOLICY was set, thus packets were not
checked against xfrm policies. Like for egress side, fl6_gre_key should be
correctly set, this is now done in decode_session6().
Fixes: c12b395a46 ("gre: Support GRE over IPv6")
Cc: stable@vger.kernel.org
Signed-off-by: Ghalem Boudour <ghalem.boudour@6wind.com>
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
We need a way to release a fib6_nh's per-cpu dsts when replacing
nexthops otherwise we can end up with stale per-cpu dsts which hold net
device references, so add a new IPv6 stub called fib6_nh_release_dsts.
It must be used after an RCU grace period, so no new dsts can be created
through a group's nexthop entry.
Similar to fib6_nh_release it shouldn't be used if fib6_nh_init has failed
so it doesn't need a dummy stub when IPv6 is not enabled.
Fixes: 7bf4796dd0 ("nexthops: add support for replace")
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We deal with IPv6 packets, so we need to use IP6CB(skb)->flags and
IP6SKB_REROUTED, instead of IPCB(skb)->flags and IPSKB_REROUTED
Found by code inspection, please double check that fixing this bug
does not surface other bugs.
Fixes: 09ee9dba96 ("ipv6: Reinject IPv6 packets if IPsec policy matches after SNAT")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Tobias Brunner <tobias@strongswan.org>
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Cc: David Ahern <dsahern@kernel.org>
Reviewed-by: David Ahern <dsahern@kernel.org>
Tested-by: Tobias Brunner <tobias@strongswan.org>
Acked-by: Tobias Brunner <tobias@strongswan.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
