If register_netdev() fails we are not propagating the error and
we return success because ax_open() succeeded previously.
Fix this by checking the return value of ax_open() and
register_netdev() and propagate the error in case of failure.
Reported-by: RUC_Soft_Sec <zy900702@163.com>
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains five Netfilter fixes for your net tree,
they are:
1) Silence a warning on falling back to vmalloc(). Since 88eab472ec, we can
easily hit this warning message, that gets users confused. So let's get rid
of it.
2) Recently when porting the template object allocation on top of kmalloc to
fix the netns dependencies between x_tables and conntrack, the error
checks where left unchanged. Remove IS_ERR() and check for NULL instead.
Patch from Dan Carpenter.
3) Don't ignore gfp_flags in the new nf_ct_tmpl_alloc() function, from
Joe Stringer.
4) Fix a crash due to NULL pointer dereference in ip6t_SYNPROXY, patch from
Phil Sutter.
5) The sequence number of the Syn+ack that is sent from SYNPROXY to clients is
not adjusted through our NAT infrastructure, as a result the client may
ignore this TCP packet and TCP flow hangs until the client probes us. Also
from Phil Sutter.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull HID fixes from Jiri Kosina:
- fix for bounds limit calculation in uclogic driver, by Dan Carpenter
- fix for use-after-free during device removal, by Krzysztof Kozlowski
- fix for userspace regression (that became apparent only with shiny
new libinput, so it's not that bad, but I still consider it 4.2
material), in wacom driver, by Jason Gerecke
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid:
HID: wacom: Report correct device resolution when using the wireless adapater
HID: hid-input: Fix accessing freed memory during device disconnect
HID: uclogic: fix limit in uclogic_tablet_enable()
The 'wacom_wireless_work' function does not recalculate the tablet's
resolution, causing the value contained in the 'features' struct to
always be reported to userspace. This value is valid only for the pen
interface, meaning that the value will be incorrect for the touchpad (if
present). This in particular causes problems for libinput which relies
on the reported resolution being correct.
This patch adds the necessary calls to recalculate the resolution for
each interface. This requires a little bit of code shuffling since both
the 'wacom_set_default_phy' and 'wacom_calculate_res' are declared below
their new first point of use in 'wacom_wireless_work'.
Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Yuval Mintz says:
====================
bnx2x: small fixes
This adds 2 small fixes, one to error flows during memory release
and the other to flash writes via ethtool API.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Writing each 4Kb page into flash might take up-to ~100 miliseconds,
during which time management firmware cannot acces the nvram for its
own uses.
Firmware upgrade utility use the ethtool API to burn new flash images
for the device via the ethtool API, doing so by writing several page-worth
of data on each command. Such action might create problems for the
management firmware, as the nvram might not be accessible for a long time.
This patch changes the write implementation, releasing the nvram lock on
the completion of each page, allowing the management firmware time to
claim it and perform its own required actions.
Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com>
Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
On error flows its possible to free an SKB even if it was not allocated.
Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com>
Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This change isdn driver, remove reverse_bits() function,
use the generic revbit8() function instead.
Signed-off-by: yalin wang <yalin.wang2010@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add or remove some tabs so that statements line up correctly.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There were missing curly braces so it means we call add_debugfs_mem()
unintentionally.
Fixes: 3ccc6cf74d ('cxgb4: Adds support for T6 adapter')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When using a cluster of switches, some topologies will have an MDIO
bus per switch, not one for the whole cluster. Allow this to be
represented in the device tree, by adding an optional mii-bus property
at the switch level. The old platform_device method of instantiation
supports this already, so only the device tree binding needs extending
with an additional optional phandle.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add register definitions #defines for accessing the EEPROM.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pravin B Shelar says:
====================
GRE: Use flow based tunneling for OVS GRE vport.
Following patches make use of new Using GRE tunnel meta data
collection feature. This allows us to directly use netdev
based GRE tunnel implementation. While doing so I have
removed GRE demux API which were targeted for OVS. Most
of GRE protocol code is now consolidated in ip_gre module.
v5-v4:
Fixed Kconfig dependency for vport-gre module.
v3-v4:
Added interface to ip-gre device to enable meta data collection.
While doing this I split second patch into two patches.
v2-v3:
Add API to create GRE flow based device.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Support for sharing GREPROTO_CISCO port was added so that
OVS gre port and kernel GRE devices can co-exist. After
flow-based tunneling patches OVS GRE protocol processing
is completely moved to ip_gre module. so there is no need
for GRE protocol hook. Following patch consolidates
GRE protocol related functions into ip_gre module.
Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
Acked-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Using GRE tunnel meta data collection feature, we can implement
OVS GRE vport. This patch removes all of the OVS
specific GRE code and make OVS use a ip_gre net_device.
Minimal GRE vport is kept to handle compatibility with
current userspace application.
Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
Acked-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Following patch create new tunnel flag which enable
tunnel metadata collection on given device.
Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
Acked-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
This function will be used in gre and geneve vport implementations.
Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
Acked-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add an explicit neighbour table overflow message (ratelimited) and
statistic to make diagnosing neighbour table overflows tractable in
the wild.
Diagnosing a neighbour table overflow can be quite difficult in the wild
because there is no explicit dmesg logged. Callers to neighbour code
seem to use net_dbg_ratelimit when the neighbour call fails which means
the "base message" is not emitted and the callback suppressed messages
from the ratelimiting can end-up juxtaposed with unrelated messages.
Further, a forced garbage collection will increment a stat on each call
whether it was successful in freeing-up a table entry or not, so that
statistic is only a hint. So, add a net_info_ratelimited message and
explicit statistic to the neighbour code.
Signed-off-by: Rick Jones <rick.jones2@hp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds the ability to toggle the vlan filtering support via
netlink. Since we're already running with rtnl in .changelink() we don't
need to take any additional locks.
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
After "62bccb8 net-timestamp: Make the clone operation stand-alone from phy
timestamping" the hwtstamps parameter of skb_complete_tx_timestamp() may no
longer be NULL.
Signed-off-by: Benjamin Poirier <bpoirier@suse.com>
Cc: Alexander Duyck <alexander.h.duyck@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Shahed Shaikh says:
====================
qlcnic: enhancements
This series adds few enhancements.
o Patch from Harish reorders the sequence of header files inclusion,
keeping kernel's header files on top.
o Firmware introduced a new feature which allows driver to increases
the size of firmware dump of iSCSI function which is being collected
by NIC driver.
o Print buffer address which is holding a firmware dump.
o Use vzalloc() instead kzalloc() for allocating large chunk of memory
which will avoid potential memory allocation failure.
o Add new device ID for 0x8C30 which is a 83xx series based VF function.
Please apply this series to net-next.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Driver allocates a large chunk of temporary buffer using kzalloc
to copy FW image. As there is no real need of this memory to be
physically contiguous, use vzalloc instead.
Signed-off-by: Shahed Shaikh <shahed.shaikh@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In some cases it is required to capture minidump for iSCSI functions
as part of default minidump collection process. To enable this, firmware
exports it's capability and driver need to enable that capability
by issuing a mailbox command.
With this feature, firmware can provide additional iSCSI function's
minidump with smaller minidump capture mask (0x1f).
Signed-off-by: Shahed Shaikh <shahed.shaikh@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Include local headers files after kernel's header files.
Signed-off-by: Harish Patil <harish.patil@qlogic.com>
Signed-off-by: Shahed Shaikh <shahed.shaikh@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
For the Marvel 88e1111 PHY only two SGMII modes are available, both
allowing only SGMII to copper mode (with or without clock). SGMII
to fiber mode is not supported. Make sure the fiber/copper registers
selector bits are cleared for selecting copper mode.
Signed-off-by: Madalin Bucur <madalin.bucur@freescale.com>
Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
48ed7b26fa ("ipv6: reject locally assigned nexthop addresses") is too
strict; it rejects following corner-case:
ip -6 route add default via fe80::1:2:3 dev eth1
[ where fe80::1:2:3 is assigned to a local interface, but not eth1 ]
Fix this by restricting search to given device if nh is linklocal.
Joint work with Hannes Frederic Sowa.
Fixes: 48ed7b26fa ("ipv6: reject locally assigned nexthop addresses")
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
When we transmit a fragmented skb, we may run into a race like the
following scenario (assume txq->cur_tx is next to txq->dirty_tx):
cpu 0 cpu 1
fec_enet_txq_submit_skb
reserve a bdp for the first fragment
fec_enet_txq_submit_frag_skb
update the bdp for the other fragment
update txq->cur_tx
fec_enet_tx_queue
bdp = fec_enet_get_nextdesc(txq->dirty_tx, fep, queue_id);
This bdp is the bdp reserved for the first segment. Given
that this bdp BD_ENET_TX_READY bit is not set and txq->cur_tx
is already pointed to a bdp beyond this one. We think this is a
completed bdp and try to reclaim it.
update the bdp for the first segment
update txq->cur_tx
So we shouldn't update the txq->cur_tx until all the update to the
bdps used for fragments are performed. Also add the corresponding
memory barrier to guarantee that the update to the bdps, dirty_tx and
cur_tx performed in the proper order.
Signed-off-by: Kevin Hao <haokexin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus reports the following deadlock on rtnl_mutex; triggered only
once so far (extract):
[12236.694209] NetworkManager D 0000000000013b80 0 1047 1 0x00000000
[12236.694218] ffff88003f902640 0000000000000000 ffffffff815d15a9 0000000000000018
[12236.694224] ffff880119538000 ffff88003f902640 ffffffff81a8ff84 00000000ffffffff
[12236.694230] ffffffff81a8ff88 ffff880119c47f00 ffffffff815d133a ffffffff81a8ff80
[12236.694235] Call Trace:
[12236.694250] [<ffffffff815d15a9>] ? schedule_preempt_disabled+0x9/0x10
[12236.694257] [<ffffffff815d133a>] ? schedule+0x2a/0x70
[12236.694263] [<ffffffff815d15a9>] ? schedule_preempt_disabled+0x9/0x10
[12236.694271] [<ffffffff815d2c3f>] ? __mutex_lock_slowpath+0x7f/0xf0
[12236.694280] [<ffffffff815d2cc6>] ? mutex_lock+0x16/0x30
[12236.694291] [<ffffffff814f1f90>] ? rtnetlink_rcv+0x10/0x30
[12236.694299] [<ffffffff8150ce3b>] ? netlink_unicast+0xfb/0x180
[12236.694309] [<ffffffff814f5ad3>] ? rtnl_getlink+0x113/0x190
[12236.694319] [<ffffffff814f202a>] ? rtnetlink_rcv_msg+0x7a/0x210
[12236.694331] [<ffffffff8124565c>] ? sock_has_perm+0x5c/0x70
[12236.694339] [<ffffffff814f1fb0>] ? rtnetlink_rcv+0x30/0x30
[12236.694346] [<ffffffff8150d62c>] ? netlink_rcv_skb+0x9c/0xc0
[12236.694354] [<ffffffff814f1f9f>] ? rtnetlink_rcv+0x1f/0x30
[12236.694360] [<ffffffff8150ce3b>] ? netlink_unicast+0xfb/0x180
[12236.694367] [<ffffffff8150d344>] ? netlink_sendmsg+0x484/0x5d0
[12236.694376] [<ffffffff810a236f>] ? __wake_up+0x2f/0x50
[12236.694387] [<ffffffff814cad23>] ? sock_sendmsg+0x33/0x40
[12236.694396] [<ffffffff814cb05e>] ? ___sys_sendmsg+0x22e/0x240
[12236.694405] [<ffffffff814cab75>] ? ___sys_recvmsg+0x135/0x1a0
[12236.694415] [<ffffffff811a9d12>] ? eventfd_write+0x82/0x210
[12236.694423] [<ffffffff811a0f9e>] ? fsnotify+0x32e/0x4c0
[12236.694429] [<ffffffff8108cb70>] ? wake_up_q+0x60/0x60
[12236.694434] [<ffffffff814cba09>] ? __sys_sendmsg+0x39/0x70
[12236.694440] [<ffffffff815d4797>] ? entry_SYSCALL_64_fastpath+0x12/0x6a
It seems so far plausible that the recursive call into rtnetlink_rcv()
looks suspicious. One way, where this could trigger is that the senders
NETLINK_CB(skb).portid was wrongly 0 (which is rtnetlink socket), so
the rtnl_getlink() request's answer would be sent to the kernel instead
to the actual user process, thus grabbing rtnl_mutex() twice.
One theory would be that netlink_autobind() triggered via netlink_sendmsg()
internally overwrites the -EBUSY error to 0, but where it is wrongly
originating from __netlink_insert() instead. That would reset the
socket's portid to 0, which is then filled into NETLINK_CB(skb).portid
later on. As commit d470e3b483 ("[NETLINK]: Fix two socket hashing bugs.")
also puts it, -EBUSY should not be propagated from netlink_insert().
It looks like it's very unlikely to reproduce. We need to trigger the
rhashtable_insert_rehash() handler under a situation where rehashing
currently occurs (one /rare/ way would be to hit ht->elasticity limits
while not filled enough to expand the hashtable, but that would rather
require a specifically crafted bind() sequence with knowledge about
destination slots, seems unlikely). It probably makes sense to guard
__netlink_insert() in any case and remap that error. It was suggested
that EOVERFLOW might be better than an already overloaded ENOMEM.
Reference: http://thread.gmane.org/gmane.linux.network/372676
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Acked-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
The commit "e29aa33 bna: Enable Multi Buffer RX" moved packets counter
increment from the beginning of the NAPI processing loop after the check
for erroneous packets so they are never accounted. This counter is used
to inform firmware about number of processed completions (packets).
As these packets are never acked the firmware fires IRQs for them again
and again.
Fixes: e29aa33 ("bna: Enable Multi Buffer RX")
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Acked-by: Rasesh Mody <rasesh.mody@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Marcin Wojtas says:
====================
Fixes for the network driver of Marvell Armada 375 SoC
This is a set of three patches that fix long-lasting problems implemented in
the initial support for the Armada 375 network controller.
Due to an inappropriate concept of handling the per-CPU sent packets'
processing on TX path the driver numerous problems occured, such as RCU
stalls. Those have been fixed, of which details you can find in the commit
logs. The patches were intensively tested on top of v4.2-rc5.
I'm looking forward to any comments or remarks.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The PP2 controller is capable of per-CPU TX processing, which means there are
per-CPU banked register sets and queues. Current version of the driver supports
TX packet coalescing - once on given CPU sent packets amount reaches a threshold
value, an IRQ occurs. However, there is a single interrupt line responsible for
CPU0/1 TX and RX events (the latter is not per-CPU, the hardware does not
support RSS).
When the top-half executes the interrupt cause is not known. This is why in
NAPI poll function, along with RX processing, IRQ cause register on both
CPU's is accessed in order to determine on which of them the TX coalescing
threshold might have been reached. Thus the egress processing and releasing the
buffers is able to take place on the corresponding CPU. Hitherto approach lead
to an illegal usage of on_each_cpu function in softirq context.
The problem is solved by resigning from TX coalescing interrupts and separating
egress finalization from NAPI processing. For that purpose a method of using
hrtimer is introduced. In main transmit function (mvpp2_tx) buffers are released
once a software coalescing threshold is reached. In case not all the data is
processed a timer is set on this CPU - in its interrupt context a tasklet is
scheduled in which all queues are processed. At once only one timer per-CPU can
be running, which is controlled by a dedicated flag.
This commit removes TX processing from NAPI polling function, disables hardware
coalescing and enables hrtimer with tasklet, using new per-CPU port structure
(mvpp2_port_pcpu).
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
mvpp2 driver allows usage of per-CPU TX processing. Once the packets are
prepared independetly on each CPU, the hardware enqueues the descriptors in
common TX queue. After they are sent, the buffers and associated sk_buffs
should be released on the corresponding CPU.
This is why a special index is maintained in order to point to the right data to
be released after transmission takes place. Each per-CPU TX queue comprise an
array of sent sk_buffs, freed in mvpp2_txq_bufs_free function. However, the
index was used there also for obtaining a descriptor (and therefore a buffer to
be DMA-unmapped) from common TX queue, which was wrong, because it was not
referring to the current CPU.
This commit enables proper unmapping of sent data buffers by indexing them in
per-CPU queues using a dedicated array for keeping their physical addresses.
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Using spinlocks protection during one-time driver initialization is not
necessary. Moreover it resulted in invalid GFP_KERNEL allocation under the lock.
This commit removes redundant spinlocks from buffer manager part of mvpp2
initialization.
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
Reported-by: Alexandre Fournier <alexandre.fournier@wisp-e.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
- Fix runtime PM issues on Arizona
- Fix IRQ/Suspend race on Arizona
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQIcBAABAgAGBQJVyMu3AAoJEFGvii+H/Hdhvp4QAIBWKyet/MbWQY5rptvKZmTV
zQeTjQb6Qyr/hUJQ1Ptedu/Df5eX8L4HVVLuQDTTMjVMd+4KSAD18PdqrjMsQ7U3
fTfkYs4w4o71aSg3yKVQ8Y+OekwmumVPWOTlb2PSFwEciEhBS1Fgl0BIOWy3Or3g
rEG19B0/rlL2CE448C9ENqtUcEmt4MylyyoDFUz/27zLY74Jw7trHpXBY9d1tXhG
BJD9qQNDdO1o5zBvvVQ8ETr+QK60GahayuwhXtnbJbvL46wGrxhOALwS9UtyhF/w
XgEvZkX7Ns6uZrZkLhz251GNPxqE7CEe2HZ2x8EUj8TxbIXA/QbNm4sid6xe74IQ
YGRTrVql5By+LYemEqrOIw2T4i+7HI7hOf+LI6kVWvn49/zr6v7Vk2deSZ+aIcEs
9rUTa7upIoLA5msDgk1SILdxKjStkgbz/BDUdAH8hbIJe8hzk29Kr2A9/D1QwIif
k41+KWDaobUFiKLUQUavPdGTVus05kolsmgikmlg7lB3WSB496uhsQ9DxddH7Vqo
WoJ4BHXn4O++uSAuGe8MQGBYviK32pEpSc5k+U1dauIqNmrRy1W7Tt5DsKtNNWDn
F64KVNNLfbEhHp9Tgnd+7axvhuNpll6FaSGEvFC+TsA4Xdvk692k5HmDA2L4/Dyx
OCHLOve/vkNqPi8mmD5K
=/Rnq
-----END PGP SIGNATURE-----
Merge tag 'mfd-fixes-4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull MFD fixes from Lee Jones:
- fix dependency issues on ChromeOS platforms
- fix runtime PM issues on Arizona
- fix IRQ/suspend race on Arizona
* tag 'mfd-fixes-4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd:
mfd: Remove MFD_CROS_EC_SPI depends on OF
platform/chrome: Don't make CHROME_PLATFORMS depends on X86 || ARM
mfd: arizona: Fix initialisation of the PM runtime
mfd: arizona: Fix race between runtime suspend and IRQs
negotiation issues, and string formatting.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=zMAG
-----END PGP SIGNATURE-----
Merge tag 'ntb-4.2-rc7' of git://github.com/jonmason/ntb
Pull NTB bugfixes from Jon Mason:
"NTB bug fixes to address transport receive issues, stats, link
negotiation issues, and string formatting"
* tag 'ntb-4.2-rc7' of git://github.com/jonmason/ntb:
ntb: avoid format string in dev_set_name
NTB: Fix dereference before check
NTB: Fix zero size or integer overflow in ntb_set_mw
NTB: Schedule to receive on QP link up
NTB: Fix oops in debugfs when transport is half-up
NTB: ntb_netdev not covering all receive errors
NTB: Fix transport stats for multiple devices
NTB: Fix ntb_transport out-of-order RX update
Pull RCU pathwalk fix from Al Viro:
"Another racy use of nd->path.dentry in RCU mode"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
may_follow_link() should use nd->inode
Since 906c55579a ("timekeeping: Copy the shadow-timekeeper over the
real timekeeper last") it has become possible on arm64 to:
- Obtain a CLOCK_MONOTONIC_COARSE or CLOCK_REALTIME_COARSE timestamp
via syscall.
- Subsequently obtain a timestamp for the same clock ID via VDSO which
predates the first timestamp (by one jiffy).
This is because arm64's update_vsyscall is deriving the coarse time
using the __current_kernel_time interface, when it should really be
using the timekeeper object provided to it by the timekeeping core.
It happened to work before only because __current_kernel_time would
access the same timekeeper object which had been passed to
update_vsyscall. This is no longer the case.
Signed-off-by: Nathan Lynch <nathan_lynch@mentor.com>
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
It turns out that a PV domU also requires the "Xen PV" APIC
driver. Otherwise, the flat driver is used and we get stuck in busy
loops that never exit, such as in this stack trace:
(gdb) target remote localhost:9999
Remote debugging using localhost:9999
__xapic_wait_icr_idle () at ./arch/x86/include/asm/ipi.h:56
56 while (native_apic_mem_read(APIC_ICR) & APIC_ICR_BUSY)
(gdb) bt
#0 __xapic_wait_icr_idle () at ./arch/x86/include/asm/ipi.h:56
#1 __default_send_IPI_shortcut (shortcut=<optimized out>,
dest=<optimized out>, vector=<optimized out>) at
./arch/x86/include/asm/ipi.h:75
#2 apic_send_IPI_self (vector=246) at arch/x86/kernel/apic/probe_64.c:54
#3 0xffffffff81011336 in arch_irq_work_raise () at
arch/x86/kernel/irq_work.c:47
#4 0xffffffff8114990c in irq_work_queue (work=0xffff88000fc0e400) at
kernel/irq_work.c:100
#5 0xffffffff8110c29d in wake_up_klogd () at kernel/printk/printk.c:2633
#6 0xffffffff8110ca60 in vprintk_emit (facility=0, level=<optimized
out>, dict=0x0 <irq_stack_union>, dictlen=<optimized out>,
fmt=<optimized out>, args=<optimized out>)
at kernel/printk/printk.c:1778
#7 0xffffffff816010c8 in printk (fmt=<optimized out>) at
kernel/printk/printk.c:1868
#8 0xffffffffc00013ea in ?? ()
#9 0x0000000000000000 in ?? ()
Mailing-list-thread: https://lkml.org/lkml/2015/8/4/755
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
A sun7i-a20-olinuxino-micro fails to boot when kernel parameter
vt.global_cursor_default=0. The value is copied to vc->vc_deccm
causing the initialization of ops->cur_blink_jiffies to be skipped.
Unconditionally initialize it.
Reported-and-tested-by: Jonathan Liu <net147@gmail.com>
Signed-off-by: Scot Doyle <lkml14@scotdoyle.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
In case videomode_from_timings() fails in function of_get_videomode(), the
allocated display timing data is not freed in the exit path. Make sure that
display_timings_release() is called in any case. Detected by Coverity CID
1309681.
Signed-off-by: Christian Engelmayer <cengelma@gmx.at>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Upon receipt of SYNACK from the server, ipt_SYNPROXY first sends back an ACK to
finish the server handshake, then calls nf_ct_seqadj_init() to initiate
sequence number adjustment of forwarded packets to the client and finally sends
a window update to the client to unblock it's TX queue.
Since synproxy_send_client_ack() does not set synproxy_send_tcp()'s nfct
parameter, no sequence number adjustment happens and the client receives the
window update with incorrect sequence number. Depending on client TCP
implementation, this leads to a significant delay (until a window probe is
being sent).
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
This happens when networking namespaces are enabled.
Suggested-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: Phil Sutter <phil@nwl.cc>
Acked-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
The clocks need to be prepared before being enabled. Without it a
warning appears in the drivers probe path :
WARNING: CPU: 0 PID: 1 at drivers/clk/clk.c:707 clk_core_enable+0x84/0xa0()
Modules linked in:
CPU: 0 PID: 1 Comm: swapper Not tainted 4.2.0-rc3-cm-x300+ #804
Hardware name: CM-X300 module
[<c000ed50>] (unwind_backtrace) from [<c000ce08>] (show_stack+0x10/0x14)
[<c000ce08>] (show_stack) from [<c0017eb4>] (warn_slowpath_common+0x7c/0xb4)
[<c0017eb4>] (warn_slowpath_common) from [<c0017f88>] (warn_slowpath_null+0x1c/0x24)
[<c0017f88>] (warn_slowpath_null) from [<c02d30dc>] (clk_core_enable+0x84/0xa0)
[<c02d30dc>] (clk_core_enable) from [<c02d3118>] (clk_enable+0x20/0x34)
[<c02d3118>] (clk_enable) from [<c0200dfc>] (pxa3xx_gcu_probe+0x148/0x338)
[<c0200dfc>] (pxa3xx_gcu_probe) from
[<c022eccc>] (platform_drv_probe+0x30/0x94)
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Fix omap_dss_find_output_by_port_node() port parameter refcount
decrementation. The only user of dss_of_port_get_parent_device()
function is omap_dss_find_output_by_port_node() and it assumes the
refcount of the port parameter is not decremented by the call.
Signed-off-by: Jyri Sarha <jsarha@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Commit 11c32d7b62
"video: move Versatile CLCD helpers" missed the fact
that the Integrator/CP is also using the helper, and
as a result the platform got only stubs and no graphics.
Add this as a default selection to Kconfig so we have
graphics again.
Fixes: 11c32d7b62 (video: move Versatile CLCD helpers)
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Jiri Pirko says:
====================
mlxsw: Couple of fixes/adjustments
Ido Schimmel (5):
mlxsw: Call free_netdev when removing port
mlxsw: Make system port to local port mapping explicit
mlxsw: Simplify mlxsw_sx_port_xmit function
mlxsw: Use correct skb length when dumping payload
mlxsw: Fix use-after-free bug in mlxsw_sx_port_xmit
Jiri Pirko (2):
mlxsw: Make pci module dependent on HAS_DMA and HAS_IOMEM
mlxsw: Strip FCS from incoming packets
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
