There is a spelling mistake in a literal string in the array
bnad_net_stats_strings. Fix it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Implement channel management functions to allow dynamic addition and
removal of transmit queues. The `ethtool --show-channels` and
`ethtool --set-channels` commands can be used to get and set the
number of queues, respectively. Allow the ability to add as many
transmit queues as available processors but never allow more than the
hard maximum of 16. The number of receive queues is one and cannot be
modified.
Depending on whether the requested number of queues is larger or
smaller than the current value, either allocate or free long term
buffers. Since long term buffer construction and destruction can
occur in two different areas, from either channel set requests or
device open/close, define functions for performing this work. If
allocation of a new buffer fails, then attempt to revert back to the
previous number of queues.
Signed-off-by: Nick Child <nnac123@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The `ndo_start_xmit` function is protected by a spinlock on the tx queue
being used to transmit the skb. Allow concurrent calls to
`ndo_start_xmit` by using more than one tx queue. This allows for
greater throughput when several jobs are trying to transmit data.
Introduce 16 tx queues (leave single rx queue as is) which each
correspond to one DMA mapped long term buffer.
Signed-off-by: Nick Child <nnac123@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Rather than DMA mapping and unmapping every outgoing skb, copy the skb
into a buffer that was mapped during the drivers open function. Copying
the skb and its frags have proven to be more time efficient than
mapping and unmapping. As an effect, performance increases by 3-5
Gbits/s.
Allocate and DMA map one continuous 64KB buffer at `ndo_open`. This
buffer is maintained until `ibmveth_close` is called. This buffer is
large enough to hold the largest possible linnear skb. During
`ndo_start_xmit`, copy the skb and all of it's frags into the continuous
buffer. By manually linnearizing all the socket buffers, time is saved
during memcpy as well as more efficient handling in FW.
As a result, we no longer need to worry about the firmware limitation
of handling a max of 6 frags. So, we only need to maintain 1 descriptor
instead of 6 and can hardcode 0 for the other 5 descriptors during
h_send_logical_lan.
Since, DMA allocation/mapping issues can no longer arise in xmit
functions, we can further reduce code size by removing the need for a
bounce buffer on DMA errors.
Signed-off-by: Nick Child <nnac123@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There are spelling mistakes in two literal strings. Fix these.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
As 2.5G, 5G ethernet ports are more common and affordable,
these ports are being used in LAN bridge devices.
STP port_cost() is missing path_cost assignment for these link speeds,
causes highest cost 100 being used.
This result in lower speed port being picked
when there is loop between 5G and 1G ports.
Original path_cost: 10G=2, 1G=4, 100m=19, 10m=100
Adjusted path_cost: 10G=2, 5G=3, 2.5G=4, 1G=5, 100m=19, 10m=100
speed greater than 10G = 1
Signed-off-by: Steven Hsieh <steven.hsieh@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There is a spelling mistake in a netdev_err message. Fix it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
pskb_may_pull already contains all of the checks performed by
pskb_pull.
Use pskb_may_pull for validation in pskb_pull, eliminating the
duplication and making __pskb_pull obsolete.
Replace __pskb_pull with pskb_pull where applicable.
Signed-off-by: Richard Gobert <richardbgobert@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Follow the advice of the Documentation/filesystems/sysfs.rst and show()
should only use sysfs_emit() or sysfs_emit_at() when formatting the value
to be returned to user space.
Signed-off-by: Wang Yufen <wangyufen@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Follow the advice of the Documentation/filesystems/sysfs.rst and show()
should only use sysfs_emit() or sysfs_emit_at() when formatting the value
to be returned to user space.
Signed-off-by: Wang Yufen <wangyufen@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Follow the advice of the Documentation/filesystems/sysfs.rst and show()
should only use sysfs_emit() or sysfs_emit_at() when formatting the value
to be returned to user space.
Signed-off-by: Wang Yufen <wangyufen@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Gerhard Engleder says:
====================
tsnep: multi queue support and some other improvements
Add support for additional TX/RX queues along with RX flow classification
support.
Binding is extended to allow additional interrupts for additional TX/RX
queues. Also dma-coherent is allowed as minor improvement.
RX path optimisation is done by using page pool as preparations for future
XDP support.
v4:
- rework dma-coherent commit message (Krzysztof Kozlowski)
- fixed order of interrupt-names in binding (Krzysztof Kozlowski)
- add line break between examples in binding (Krzysztof Kozlowski)
- add RX_CLS_LOC_ANY support to RX flow classification
v3:
- now with changes in cover letter
v2:
- use netdev_name() (Jakub Kicinski)
- use ENOENT if RX flow rule is not found (Jakub Kicinski)
- eliminate return code of tsnep_add_rule() (Jakub Kicinski)
- remove commit with lazy refill due to depletion problem (Jakub Kicinski)
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Use page pool for RX buffer handling. Makes RX path more efficient and
is required prework for future XDP support.
Signed-off-by: Gerhard Engleder <gerhard@engleder-embedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Received Ethernet frames are assigned to first RX queue per default.
Based on EtherType Ethernet frames can be assigned to other RX queues.
This enables processing of real-time Ethernet protocols on dedicated
RX queues.
Add RX flow classification interface for EtherType based RX queue
assignment.
Signed-off-by: Gerhard Engleder <gerhard@engleder-embedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Support additional TX/RX queue pairs if dedicated interrupt is
available. Interrupts are detected by name in device tree.
Signed-off-by: Gerhard Engleder <gerhard@engleder-embedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
For multiple queues multiple interrupts shall be used. Therefore, rework
global interrupt to per queue interrupt.
Every interrupt name shall contain interface name and queue information.
To get a valid interface name, the interrupt request needs to by done
during open like in other drivers. Additionally, this allows the removal
of some initialisation checks in the interrupt handler.
Signed-off-by: Gerhard Engleder <gerhard@engleder-embedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Additional TX/RX queue pairs require dedicated interrupts. Extend
binding with additional interrupts.
Signed-off-by: Gerhard Engleder <gerhard@engleder-embedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Within SoCs like ZynqMP, FPGA logic can be connected to different kinds
of AXI master ports. Also cache coherent AXI master ports are available.
The property "dma-coherent" is used to signal that DMA is cache
coherent.
Add "dma-coherent" property to allow the configuration of cache coherent
DMA.
Signed-off-by: Gerhard Engleder <gerhard@engleder-embedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2022-09-28 (ice)
Arkadiusz implements a single pin initialization function, checking feature
bits, instead of having separate device functions and updates sub-device
IDs for recognizing E810T devices.
Martyna adds support for switchdev filters on VLAN priority field.
* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue:
ice: Add support for VLAN priority filters in switchdev
ice: support features on new E810T variants
ice: Merge pin initialization of E810 and E810T adapters
====================
Link: https://lore.kernel.org/r/20220928203217.411078-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Follow the advice of the Documentation/filesystems/sysfs.rst and show()
should only use sysfs_emit() or sysfs_emit_at() when formatting the value
to be returned to user space.
Signed-off-by: Wang Yufen <wangyufen@huawei.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/1664364860-29153-1-git-send-email-wangyufen@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The driver currently sets the PTCMSDUR register statically to the max
MTU supported by the interface. Keep this logic if tc-taprio is absent
or if the max_sdu for a traffic class is 0, and follow the requested max
SDU size otherwise.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The Port Time Gating Control Register (PTGCR) and Port Time Gating
Capability Register (PTGCAPR) have definitions in the driver which
aren't in line with the other registers. Rename these.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The &priv->si->hw construct dereferences 2 pointers and makes lines
longer than they need to be, in turn making the code harder to read.
Replace &priv->si->hw accesses with a "hw" variable when there are 2 or
more accesses within a function that dereference this. This includes
loops, since &priv->si->hw is a loop invariant.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add support for configuring the max SDU per priority and per port. If not
specified, keep the default.
Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The following patch will need to make this function also respond to
TC_QUERY_BASE, so make the processing more structured around the
tc_setup_type.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Our current vsc9959_tas_guard_bands_update() algorithm has a limitation
imposed by the hardware design. To avoid packet overruns between one
gate interval and the next (which would add jitter for scheduled traffic
in the next gate), we configure the switch to use guard bands. These are
as large as the largest packet which is possible to be transmitted.
The problem is that at tc-taprio intervals of sizes comparable to a
guard band, there isn't an obvious place in which to split the interval
between the useful portion (for scheduling) and the guard band portion
(where scheduling is blocked).
For example, a 10 us interval at 1Gbps allows 1225 octets to be
transmitted. We currently split the interval between the bare minimum of
33 ns useful time (required to schedule a single packet) and the rest as
guard band.
But 33 ns of useful scheduling time will only allow a single packet to
be sent, be that packet 1200 octets in size, or 60 octets in size. It is
impossible to send 2 60 octets frames in the 10 us window. Except that
if we reduced the guard band (and therefore the maximum allowable SDU
size) to 5 us, the useful time for scheduling is now also 5 us, so more
packets could be scheduled.
The hardware inflexibility of not scheduling according to individual
packet lengths must unfortunately propagate to the user, who needs to
tune the queueMaxSDU values if he wants to fit more small packets into a
10 us interval, rather than one large packet.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
IEEE 802.1Q clause 12.29.1.1 "The queueMaxSDUTable structure and data
types" and 8.6.8.4 "Enhancements for scheduled traffic" talk about the
existence of a per traffic class limitation of maximum frame sizes, with
a fallback on the port-based MTU.
As far as I am able to understand, the 802.1Q Service Data Unit (SDU)
represents the MAC Service Data Unit (MSDU, i.e. L2 payload), excluding
any number of prepended VLAN headers which may be otherwise present in
the MSDU. Therefore, the queueMaxSDU is directly comparable to the
device MTU (1500 means L2 payload sizes are accepted, or frame sizes of
1518 octets, or 1522 plus one VLAN header). Drivers which offload this
are directly responsible of translating into other units of measurement.
To keep the fast path checks optimized, we keep 2 arrays in the qdisc,
one for max_sdu translated into frame length (so that it's comparable to
skb->len), and another for offloading and for dumping back to the user.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When adding optional new features to Qdisc offloads, existing drivers
must reject the new configuration until they are coded up to act on it.
Since modifying all drivers in lockstep with the changes in the Qdisc
can create problems of its own, it would be nice if there existed an
automatic opt-in mechanism for offloading optional features.
Jakub proposes that we multiplex one more kind of call through
ndo_setup_tc(): one where the driver populates a Qdisc-specific
capability structure.
First user will be taprio in further changes. Here we are introducing
the definitions for the base functionality.
Link: https://patchwork.kernel.org/project/netdevbpf/patch/20220923163310.3192733-3-vladimir.oltean@nxp.com/
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Co-developed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
After commit 09b5678c778f("tipc: remove dead code in tipc_net and relatives"),
struct distr_queue_item is not used any more and can be removed as well.
Signed-off-by: Yuan Can <yuancan@huawei.com>
Acked-by: Jon Maloy <jmaloy@redhat.com>
Link: https://lore.kernel.org/r/20220928085636.71749-1-yuancan@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
After commit 3226b158e6 ("net: avoid 32 x truesize under-estimation
for tiny skbs") we are observing 10-20% regressions in performance
tests with small packets. The perf trace points to high pressure on
the slab allocator.
This change tries to improve the allocation schema for small packets
using an idea originally suggested by Eric: a new per CPU page frag is
introduced and used in __napi_alloc_skb to cope with small allocation
requests.
To ensure that the above does not lead to excessive truesize
underestimation, the frag size for small allocation is inflated to 1K
and all the above is restricted to build with 4K page size.
Note that we need to update accordingly the run-time check introduced
with commit fd9ea57f4e ("net: add napi_get_frags_check() helper").
Alex suggested a smart page refcount schema to reduce the number
of atomic operations and deal properly with pfmemalloc pages.
Under small packet UDP flood, I measure a 15% peak tput increases.
Suggested-by: Eric Dumazet <eric.dumazet@gmail.com>
Suggested-by: Alexander H Duyck <alexanderduyck@fb.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Link: https://lore.kernel.org/r/6b6f65957c59f86a353fc09a5127e83a32ab5999.1664350652.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The stmmac-axi-config subnode is present in multiple dwmac instance DTs,
document its content per snps,axi-config property description which is
a phandle to this subnode.
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220927012449.698915-1-marex@denx.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
nlmsg_flags are full of historical baggage, inconsistencies and
strangeness. Try to document it more thoroughly. Explain the meaning
of the ECHO flag (and while at it clarify the comment in the uAPI).
Handwave a little about the NEW request flags and how they make
sense on the surface but cater to really old paradigm before commands
were a thing.
I will add more notes on how to make use of ECHO and discouragement
for reuse of flags to the kernel-side documentation.
Link: https://lore.kernel.org/r/20220927212306.823862-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- small fixes for iqs62x-keys and melfas_mip4 drivers
- corrected register address in snvs_pwrkey driver
- Synaptic driver will stop trying to use intertouch (native) mode on
some Lenovo AMD devices
-----BEGIN PGP SIGNATURE-----
iJAEABYKADgWIQST2eWILY88ieB2DOtAj56VGEWXnAUCYzUgfBocZG1pdHJ5LnRv
cm9raG92QGdtYWlsLmNvbQAKCRBAj56VGEWXnEkhAP4/cOTiILkNKTzbu3nPAFn5
qVBp+wDpFrjN5zQKEIyOVgEAr5k7STjixjnneZnR7+ppald6Ti7LXaTESoXnqrY9
XwY=
=zsDx
-----END PGP SIGNATURE-----
Merge tag 'input-for-v6.0-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input fixes from Dmitry Torokhov:
- small fixes for iqs62x-keys and melfas_mip4 drivers
- corrected register address in snvs_pwrkey driver
- Synaptic driver will stop trying to use intertouch (native) mode on
some Lenovo AMD devices
* tag 'input-for-v6.0-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: snvs_pwrkey - fix SNVS_HPVIDR1 register address
Input: synaptics - disable Intertouch for Lenovo T14 and P14s AMD G1
Input: iqs62x-keys - drop unused device node references
Input: melfas_mip4 - fix return value check in mip4_probe()
Three late patches to fix problems discovered recently.
* Add a horkage to disable link power management by default for the
Pioneer BDR-207M and BDR-205 DVD drives (from Niklas).
* 2 patches to fix setting the maximum queue depth of libsas owned ATA
devices (from me).
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQSRPv8tYSvhwAzJdzjdoc3SxdoYdgUCYzUUjAAKCRDdoc3SxdoY
du6zAQD5X5JGmXppn5alNTFmfvekLj3wDswGgFcYtopZ0XLCrwD+Pf7K+3VVzhsj
IMj45WJe0LlnWeb1J5cCviSrm6lfIwo=
=Udns
-----END PGP SIGNATURE-----
Merge tag 'ata-6.0-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata
Pull ATA fixes from Damien Le Moal:
"Three late patches to fix problems discovered recently:
- Add a horkage to disable link power management by default for the
Pioneer BDR-207M and BDR-205 DVD drives (from Niklas)
- Two patches to fix setting the maximum queue depth of libsas owned
ATA devices (from me)"
* tag 'ata-6.0-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata:
ata: libata-sata: Fix device queue depth control
ata: libata-scsi: Fix initialization of device queue depth
libata: add ATA_HORKAGE_NOLPM for Pioneer BDR-207M and BDR-205
The 'mem' returned by platform_get_resource() has been checked in probe
function, so it is no need do this check in remove function.
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20220927151406.797800-1-yangyingliang@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Use skb_put_data() instead of skb_put() and memcpy(), which is clear.
Signed-off-by: Shang XiaoJing <shangxiaojing@huawei.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@corigine.com>
Link: https://lore.kernel.org/r/20220927141835.19221-1-shangxiaojing@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
After commit 6870957ed5bc("liquidio: make soft command calls synchronous"), no
one use struct lio_trusted_vf_ctx, so remove it.
Signed-off-by: Yuan Can <yuancan@huawei.com>
Link: https://lore.kernel.org/r/20220927133940.104181-1-yuancan@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Use skb_put_data() instead of skb_put() and memcpy(), which is shorter
and clear. Drop the tmp variable that is not needed any more.
Signed-off-by: Shang XiaoJing <shangxiaojing@huawei.com>
Link: https://lore.kernel.org/r/20220927022802.16050-1-shangxiaojing@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Saeed Mahameed says:
====================
mlx5-updates-2022-09-27
This is Part #1 of 4 parts series to align mlx5's implementation of
XSK (AF_XDP) RX-Qs indexing and management with other vendors:
Maxim Says:
===========
xsk: Bug fixes for frame mapping on striding RQ
Striding RQ relies on the driver mapping RX buffers into the NIC's
virtual memory space. Currently, regadless of the XSK frame size, mlx5e
maps them using MTT, and each mapping's length is PAGE_SIZE. As the
result, the stride size used by striding RQ is also equal to PAGE_SIZE.
This decision has the following issues:
1. In the XSK aligned mode with frame size smaller than PAGE_SIZE, it's
suboptimal. Using 2K strides and 2K pages allows to post twice as fewer
WQEs.
2. MTT is not suitable for unaligned frames, as it requires natural
alignment theoretically, in practice at least 8-byte alignment.
3. Using mapping and stride bigger than the frame has risk of writing
over the bounds of the XSK frame upon receiving packets bigger than MTU,
which is possible in some specific configurations.
This series addresses issues 1 and 2 and alleviates issue 3. Where
possible, page and stride size will match the XSK frame size (firmware
upgrade may be needed to have effect for 2K frames). Unaligned mode will
use KSM instead of MTT, which allows to drop the partial workaround [1].
[1]: https://lore.kernel.org/netdev/YufYFQ6JN91lQbso@boxer/T/
====================
Link: https://lore.kernel.org/r/20220927203611.244301-1-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Some of the parameters of striding RQ are compile-time constants, but
they are going to become dynamically calculated at runtime in a
following commit. This commit prepares the datapath to take cached
runtime parameters, prefilled at queue creation.
New fields added to struct mlx5e_rq fit into an existing 7-byte hole.
Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This commit moves the dma_info array to the end of struct mlx5e_mpw_info
to make it a flexible array. It also removes the intermediate struct
mlx5e_umr_dma_info, which used to contain only this array. The
flexibility of dma_info will allow to choose its size dynamically in a
following commit.
Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
