Commit Graph

16 Commits

Author SHA1 Message Date
Lee Jones
f4c20f084d dmaengine: mediatek: mtk-hsdma: Fix formatting in 'struct mtk_hsdma_pdesc' doc block
Struct attribute names must be an exact match or the kerneldoc checker
gets confused.

Fixes the following W=1 kernel build warning(s):

 drivers/dma/mediatek/mtk-hsdma.c:120: warning: Function parameter or member 'desc1' not described in 'mtk_hsdma_pdesc'
 drivers/dma/mediatek/mtk-hsdma.c:120: warning: Function parameter or member 'desc2' not described in 'mtk_hsdma_pdesc'
 drivers/dma/mediatek/mtk-hsdma.c:120: warning: Function parameter or member 'desc3' not described in 'mtk_hsdma_pdesc'
 drivers/dma/mediatek/mtk-hsdma.c:120: warning: Function parameter or member 'desc4' not described in 'mtk_hsdma_pdesc'

Signed-off-by: Lee Jones <lee.jones@linaro.org>
Cc: Sean Wang <sean.wang@mediatek.com>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: linux-mediatek@lists.infradead.org
Link: https://lore.kernel.org/r/20200714111546.1755231-2-lee.jones@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-07-15 17:50:46 +05:30
Masahiro Yamada
a7f7f6248d treewide: replace '---help---' in Kconfig files with 'help'
Since commit 84af7a6194 ("checkpatch: kconfig: prefer 'help' over
'---help---'"), the number of '---help---' has been gradually
decreasing, but there are still more than 2400 instances.

This commit finishes the conversion. While I touched the lines,
I also fixed the indentation.

There are a variety of indentation styles found.

  a) 4 spaces + '---help---'
  b) 7 spaces + '---help---'
  c) 8 spaces + '---help---'
  d) 1 space + 1 tab + '---help---'
  e) 1 tab + '---help---'    (correct indentation)
  f) 1 tab + 1 space + '---help---'
  g) 1 tab + 2 spaces + '---help---'

In order to convert all of them to 1 tab + 'help', I ran the
following commend:

  $ find . -name 'Kconfig*' | xargs sed -i 's/^[[:space:]]*---help---/\thelp/'

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-06-14 01:57:21 +09:00
Sascha Hauer
51fe9cd2bd dmaengine: virt-dma: Add missing locking
Originally freeing descriptors was split into a locked and an unlocked
part. The locked part in vchan_get_all_descriptors() collected all
descriptors on a separate list_head. This was done to allow iterating
over that new list in vchan_dma_desc_free_list() without a lock held.

This became broken in 13bb26ae88 ("dmaengine: virt-dma: don't always
free descriptor upon completion"). With this commit
vchan_dma_desc_free_list() no longer exclusively operates on the
separate list, but starts to put descriptors which can be reused back on
&vc->desc_allocated. This list operation should have been locked, but
wasn't.
In the mean time drivers started to call vchan_dma_desc_free_list() with
their lock held so that we now have the situation that
vchan_dma_desc_free_list() is called locked from some drivers and
unlocked from others.
To clean this up we have to do two things:

1. Add missing locking in vchan_dma_desc_free_list()
2. Make sure drivers call vchan_dma_desc_free_list() unlocked

This needs to be done atomically, so in this patch the locking is added
and all drivers are fixed.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Reviewed-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Tested-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Reviewed-by: Green Wan <green.wan@sifive.com>
Tested-by: Green Wan <green.wan@sifive.com>
Link: https://lore.kernel.org/r/20191216105328.15198-3-s.hauer@pengutronix.de
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-12-26 10:04:18 +05:30
Satendra Singh Thakur
1ff9524325 dmaengine: mediatek: hsdma_probe: fixed a memory leak when devm_request_irq fails
When devm_request_irq fails, currently, the function
dma_async_device_unregister gets called. This doesn't free
the resources allocated by of_dma_controller_register.
Therefore, we have called of_dma_controller_free for this purpose.

Signed-off-by: Satendra Singh Thakur <sst2005@gmail.com>
Link: https://lore.kernel.org/r/20191109113523.6067-1-sst2005@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-11-14 12:16:53 +05:30
Markus Elfring
a7dc0e6c1e dmaengine: mediatek: Use devm_platform_ioremap_resource() in mtk_uart_apdma_probe()
Simplify this function implementation by using a known wrapper function.

This issue was detected by using the Coccinelle software.

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Link: https://lore.kernel.org/r/366e776c-8760-eeb7-c248-7380c9f4fd34@web.de
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-10-14 13:21:20 +05:30
Markus Elfring
9d68427d0f dmaengine: mediatek: Use devm_platform_ioremap_resource() in mtk_cqdma_probe()
Simplify this function implementation a bit by using
a known wrapper function.

This issue was detected by using the Coccinelle software.

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Link: https://lore.kernel.org/r/c7e3bbae-44fa-9019-18ee-c6cdfd7c2a14@web.de
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-10-14 13:21:20 +05:30
Stephen Boyd
e17be6e1b7 dmaengine: Remove dev_err() usage after platform_get_irq()
We don't need dev_err() messages when platform_get_irq() fails now that
platform_get_irq() prints an error message itself when something goes
wrong. Let's remove these prints with a simple semantic patch.

// <smpl>
@@
expression ret;
struct platform_device *E;
@@

ret =
(
platform_get_irq(E, ...)
|
platform_get_irq_byname(E, ...)
);

if ( \( ret < 0 \| ret <= 0 \) )
{
(
-if (ret != -EPROBE_DEFER)
-{ ...
-dev_err(...);
-... }
|
...
-dev_err(...);
)
...
}
// </smpl>

While we're here, remove braces on if statements that only have one
statement (manually).

Cc: Vinod Koul <vkoul@kernel.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: dmaengine@vger.kernel.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20190730181557.90391-11-swboyd@chromium.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-07-31 20:50:53 +05:30
Linus Torvalds
47ebe00b68 dmaengine updates for v5.3-rc1
- Add support in dmaengine core to do device node checks for DT devices and
    update bunch of drivers to use that and remove open coding from drivers
  - New driver/driver support for new hardware, namely:
    - MediaTek UART APDMA
    - Freescale i.mx7ulp edma2
    - Synopsys eDMA IP core version 0
    - Allwinner H6 DMA
  - Updates to axi-dma and support for interleaved cyclic transfers
  - Greg's debugfs return value check removals on drivers
  - Updates to stm32-dma, hsu, dw, pl330, tegra drivers
 -----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJdLKxYAAoJEHwUBw8lI4NHsH8P/AqYZpUlLthe5L4qItzM1Uf0
 HqxsJYs0xworjSRml8uptx/TzjIgJnJfEk2PV5VA+0zJNz/HnH7lDH85wKDx1Ydl
 AatUuyAFRO3GZOup/hY0AEIPhoIMdg/3zS2aapjJmaEZCVK2eVKmcj0KMvO5g0cw
 tsmXm3O0xd2Na1ToslNyYgFfCn8ortuAeoKiXJxhivMbGjRfw4LW/RPgS17Vspvh
 mEuxNXFWAZ+DorgPF5BmDPZ+LXcGgCXGNIoj64W+VHaXU5yXnlky+6/0f7cEcFEd
 yl3hjXVwyAq5zIItIOmiuozZidi5yfoizXg4S2ZD3P4xXKZ5OZ9Gf/0SMyXUIErU
 pwGxo6ZgsBcEpAHtqySELQedttttID+jYYeWU6oDr2LOy3W3F7AHOEGg9l9ZllLh
 gRdIoz3PrMK1wy/9Ytl37xklZyBk+HJLkeoIAvjrNgNJ1YRKqcysUCwsmqO7SG3N
 HnIGx74sG8ChljT/yX5pElq3ip6qLdb4pJcsfxKJ9VSxsTZ3JNINGNQtvI19hKR/
 6sn/c1Rb5/S1WxINGr+2FxChxXF8OESCN6GIEu6mNYVBzQnNPzwgPxfAGCqdoOOH
 mqXXgYNePMaBGYXBkdgvP1CnqenRRmTYo/1L4QmI4Mve4xpd5zhx5cZt9FlQJ2Im
 /hVT8gZ6bIrutsVOy4rg
 =R+aC
 -----END PGP SIGNATURE-----

Merge tag 'dmaengine-5.3-rc1' of git://git.infradead.org/users/vkoul/slave-dma

Pull dmaengine updates from Vinod Koul:

 - Add support in dmaengine core to do device node checks for DT devices
   and update bunch of drivers to use that and remove open coding from
   drivers

 - New driver/driver support for new hardware, namely:
     - MediaTek UART APDMA
     - Freescale i.mx7ulp edma2
     - Synopsys eDMA IP core version 0
     - Allwinner H6 DMA

 - Updates to axi-dma and support for interleaved cyclic transfers

 - Greg's debugfs return value check removals on drivers

 - Updates to stm32-dma, hsu, dw, pl330, tegra drivers

* tag 'dmaengine-5.3-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (68 commits)
  dmaengine: Revert "dmaengine: fsl-edma: add i.mx7ulp edma2 version support"
  dmaengine: at_xdmac: check for non-empty xfers_list before invoking callback
  Documentation: dmaengine: clean up description of dmatest usage
  dmaengine: tegra210-adma: remove PM_CLK dependency
  dmaengine: fsl-edma: add i.mx7ulp edma2 version support
  dt-bindings: dma: fsl-edma: add new i.mx7ulp-edma
  dmaengine: fsl-edma-common: version check for v2 instead
  dmaengine: fsl-edma-common: move dmamux register to another single function
  dmaengine: fsl-edma: add drvdata for fsl-edma
  dmaengine: Revert "dmaengine: fsl-edma: support little endian for edma driver"
  dmaengine: rcar-dmac: Reject zero-length slave DMA requests
  dmaengine: dw: Enable iDMA 32-bit on Intel Elkhart Lake
  dmaengine: dw-edma: fix semicolon.cocci warnings
  dmaengine: sh: usb-dmac: Use [] to denote a flexible array member
  dmaengine: dmatest: timeout value of -1 should specify infinite wait
  dmaengine: dw: Distinguish ->remove() between DW and iDMA 32-bit
  dmaengine: fsl-edma: support little endian for edma driver
  dmaengine: hsu: Revert "set HSU_CH_MTSR to memory width"
  dmagengine: pl330: add code to get reset property
  dt-bindings: pl330: document the optional resets property
  ...
2019-07-17 09:55:43 -07:00
Linus Torvalds
66b59f2b5e dmaengine fixes for v5.2-rc4
The fixes for this round are in drivers:
  - jz4780 transfer fix for acking descriptors early
  - fsl-qdma: clean registers on error
  - dw-axi-dmac: null pointer dereference fix
  - mediatek-cqdma: fix sleeping in atomic context
  - tegra210-adma: fix bunch os issues like crashing in driver
    probe, channel FIFO configuration etc.
  - sprd: Fixes for possible crash on descriptor status, block
    length overflow. For 2-stage transfer fix incorrect start,
    configuration and interrupt handling.
 -----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJc+3afAAoJEHwUBw8lI4NHYe0P/RVwZso3RKbAALFg6MJLyWun
 UpIJ9NA28xcKyghXa3mbq5gFgqkwJedACaXaik/wZr23+FJodg1afy7cfZRq3l5I
 arOmc7U2HK78L+h6T6JbIRP+pxIHHlrMaVwyO2ZwQ2jJmwwV/KyXgfxmv2ZIc1cg
 0M2C22pgy7oacK47eyjfcF/yH6PWARVaUlUHB+0pXXgwpImNl9IO+ritEzJg6hA2
 boltBfHX86XB/qfbnHaqo7bGUhEY4kqQafHKDNUh+jm7GgoI5biVC7dtH7liI0es
 U3I+RXFbOi4sxaY/j5aRgCNCnc7nUdU806ma3DPuTwybeca0ixttazjtB1p56ewU
 /NkhiuWf/qShZkepGlB50l7CAJ4Q0of2tPFr8pnI9OdZl8MzcoHIhN95IT/aEByf
 f0cbwv8lAeU948zm63axs5eS36M1yoV/cUzzeLatXWY3CS82FlTiEaWGnYkfZJ9j
 DNOr7WGk81A66kNEDIq65H9qQd86kRdNgoy1f7DNxBOjzVTzXGIATM+zpb3W/tsb
 Qb3i8OD9Lo4TzWCiDqbasGYKjAwGougcRKZWvSv/qfuItq/vGnChSNs7cMx73znJ
 EfgG+/kiKEn2hj9E5eSduqOrBaL4g+AJlqb93fpH54Jjr3QaupvhCZ2bYhrb9QrU
 rW3FZfGsAcrlsPbOlIOW
 =Ca0d
 -----END PGP SIGNATURE-----

Merge tag 'dmaengine-fix-5.2-rc4' of git://git.infradead.org/users/vkoul/slave-dma

Pull dmaengine fixes from Vinod Koul:

 - jz4780 transfer fix for acking descriptors early

 - fsl-qdma: clean registers on error

 - dw-axi-dmac: null pointer dereference fix

 - mediatek-cqdma: fix sleeping in atomic context

 - tegra210-adma: fix bunch os issues like crashing in driver probe,
   channel FIFO configuration etc.

 - sprd: Fixes for possible crash on descriptor status, block length
   overflow. For 2-stage transfer fix incorrect start, configuration and
   interrupt handling.

* tag 'dmaengine-fix-5.2-rc4' of git://git.infradead.org/users/vkoul/slave-dma:
  dmaengine: sprd: Add interrupt support for 2-stage transfer
  dmaengine: sprd: Fix the right place to configure 2-stage transfer
  dmaengine: sprd: Fix block length overflow
  dmaengine: sprd: Fix the incorrect start for 2-stage destination channels
  dmaengine: sprd: Add validation of current descriptor in irq handler
  dmaengine: sprd: Fix the possible crash when getting descriptor status
  dmaengine: tegra210-adma: Fix spelling
  dmaengine: tegra210-adma: Fix channel FIFO configuration
  dmaengine: tegra210-adma: Fix crash during probe
  dmaengine: mediatek-cqdma: sleeping in atomic context
  dmaengine: dw-axi-dmac: fix null dereference when pointer first is null
  dmaengine: fsl-qdma: Add improvement
  dmaengine: jz4780: Fix transfers being ACKed too soon
2019-06-08 12:46:31 -07:00
Long Cheng
9135408c3a dmaengine: mediatek: Add MediaTek UART APDMA support
Add 8250 UART APDMA to support MediaTek UART. If MediaTek UART is
enabled by SERIAL_8250_MT6577, and we can enable this driver to offload
the UART device moving bytes.

Signed-off-by: Long Cheng <long.cheng@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-06-07 15:36:45 +05:30
Dan Carpenter
069b3c4214 dmaengine: mediatek-cqdma: sleeping in atomic context
The mtk_cqdma_poll_engine_done() function takes a true/false parameter
where true means it's called from atomic context.  There are a couple
places where it was set to false but it's actually in atomic context
so it should be true.

All the callers for mtk_cqdma_hard_reset() are holding a spin_lock and
in mtk_cqdma_free_chan_resources() we take a spin_lock before calling
the mtk_cqdma_poll_engine_done() function.

Fixes: b1f01e48df ("dmaengine: mediatek: Add MediaTek Command-Queue DMA controller for MT6765 SoC")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-05-21 14:25:59 +05:30
Thomas Gleixner
ec8f24b7fa treewide: Add SPDX license identifier - Makefile/Kconfig
Add SPDX license identifiers to all Make/Kconfig files which:

 - Have no license information of any form

These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:

  GPL-2.0-only

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21 10:50:46 +02:00
Shun-Chih Yu
5bb5c3a3ac dmaengine: mediatek-cqdma: fix wrong register usage in mtk_cqdma_start
This patch fixes wrong register usage in the mtk_cqdma_start. The
destination register should be MTK_CQDMA_DST2 instead.

Fixes: b1f01e48df ("dmaengine: mediatek: Add MediaTek Command-Queue DMA controller for MT6765 SoC")
Signed-off-by: Shun-Chih Yu <shun-chih.yu@mediatek.com>
Cc: stable@vger.kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-04-26 17:26:38 +05:30
Luis Chamberlain
750afb08ca cross-tree: phase out dma_zalloc_coherent()
We already need to zero out memory for dma_alloc_coherent(), as such
using dma_zalloc_coherent() is superflous. Phase it out.

This change was generated with the following Coccinelle SmPL patch:

@ replace_dma_zalloc_coherent @
expression dev, size, data, handle, flags;
@@

-dma_zalloc_coherent(dev, size, handle, flags)
+dma_alloc_coherent(dev, size, handle, flags)

Suggested-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
[hch: re-ran the script on the latest tree]
Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-01-08 07:58:37 -05:00
Shun-Chih Yu
b1f01e48df dmaengine: mediatek: Add MediaTek Command-Queue DMA controller for MT6765 SoC
MediaTek Command-Queue DMA controller (CQDMA) on MT6765 SoC is dedicated
to memory-to-memory transfer through queue based descriptor management.

There are only 3 physical channels inside CQDMA, while the driver is
extended to support 32 virtual channels for multiple dma users to issue
dma requests onto the CQDMA simultaneously.

Signed-off-by: Shun-Chih Yu <shun-chih.yu@mediatek.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2018-11-11 15:15:18 +05:30
Sean Wang
548c4597e9 dmaengine: mediatek: Add MediaTek High-Speed DMA controller for MT7622 and MT7623 SoC
MediaTek High-Speed DMA controller (HSDMA) on MT7622 and MT7623 SoC has
a single ring is dedicated to memory-to-memory transfer through ring based
descriptor management.

Even though there is only one physical ring available inside HSDMA, the
driver can be easily extended to the support of multiple virtual channels
processing simultaneously by means of DMA_VIRTUAL_CHANNELS effort.

Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Fengguang Wu <fengguang.wu@intel.com>
Cc: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2018-03-27 15:18:15 +05:30