SoundWire has provisions for a simple callback for the IRQ handling so
has no hard dependency on IRQ_DOMAIN, but the recent addition of IRQ
handling was causing builds without IRQ_DOMAIN to fail. Resolve this by
moving the IRQ handling into its own file and only add it to the build
when IRQ_DOMAIN is included in the kernel.
Fixes: 12a95123bf ("soundwire: bus: Allow SoundWire peripherals to register IRQ handlers")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202309150522.MoKeF4jx-lkp@intel.com/
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230920160401.854052-1-ckeepax@opensource.cirrus.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
- Core support for soundwire device number allocation
- intel driver updates for adding hw_params for DAI ops, hybrid number
allocation and power managemnt callback updates
- DT header include changes for subsystem
-----BEGIN PGP SIGNATURE-----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=4w8N
-----END PGP SIGNATURE-----
Merge tag 'soundwire-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire
Pull soundwire updates from Vinod Koul:
"Device numbering and intel driver changes are main features:
- Core support for soundwire device number allocation
- intel driver updates for adding hw_params for DAI ops, hybrid
number allocation and power managemnt callback updates
- DT header include changes for subsystem"
* tag 'soundwire-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire:
soundwire: intel_ace2x: add DAI hw_params/prepare/hw_free callbacks
soundwire: intel_auxdevice: add hybrid IDA-based device_number allocation
soundwire: bus: add callbacks for device_number allocation
soundwire: extend parameters of new_peripheral_assigned() callback
soundWire: intel_auxdevice: resume 'sdw-master' on startup and system resume
soundwire: intel_auxdevice: enable pm_runtime earlier on startup
soundwire: Explicitly include correct DT includes
The code is fork-lifted from intel.c and is mostly similar *except*
for the SHIM configuration which cannot be done here with the
introduction of HDAudio Extended links. The ACE2.x SOF side also
requires the hw_free and trigger callbacks to be implemented for
HDaudio DMA management
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230802061947.3788679-1-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Currently the in-band alerts for SoundWire peripherals can only
be communicated to the driver through the interrupt_callback
function. This however is slightly inconvenient for devices that wish
to share IRQ handling code between SoundWire and I2C/SPI, the later
would normally register an IRQ handler with the IRQ subsystem. However
there is no reason the SoundWire in-band IRQs can not also be
communicated as an actual IRQ to the driver.
Add support for SoundWire peripherals to register a normal IRQ
handler to receive SoundWire in-band alerts, allowing code to be
shared across control buses. Note that we allow users to use both the
interrupt_callback and the IRQ handler, this is useful for devices
which must clear additional chip specific SoundWire registers that are
not a part of the normal IRQ flow, or the SoundWire specification.
Signed-off-by: Lucas Tanure <tanureal@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Acked-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Acked-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230804104602.395892-2-ckeepax@opensource.cirrus.com
Signed-off-by: Lee Jones <lee@kernel.org>
The IDA-based allocation is useful to simplify debug, but it was also
introduced as a prerequisite to deal with the Intel Lunar Lake
hardware programming sequences: the wake-ups have to be handled with a
system-unique SDI address at the HDaudio controller level.
At the time, the restriction introduced by the IDA to 8 devices total
seemed perfectly fine, but recently hardware vendors created
configurations with more than 8 devices.
Add a new allocation strategy to allow for more than 8 devices using
information on the type of devices, and only use the IDA-based
allocation for devices capable of generating a wake.
In theory the information on wake capabilities should come from
firmware, but none of the existing ACPI tables provide it. The drivers
set the 'wake_capable' property, but this cannot be used reliably: if
the driver probe happens *after* the enumeration, then that property
is not initialized yet. Trying to modify the device_number on-the-fly
proved to be an impossible task generating race conditions left and
right.
The only reliable work-around to control the enumeration is to add a
quirk table. It's ugly but until platform firmware improves, hopefully as a
result of MIPI/SDCA stardization, we can expect that quirk table to
grow for each new headset or microphone codec.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230731091333.3593132-4-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Rather than add logic in the core for vendor-specific usages, add
callbacks for vendor-specific device_number allocation and release.
This patch only moves the existing IDA-based allocator used only by
Intel to the intel_auxdevice.c file and does not change the
functionality. Follow-up patches will extend the behavior by modifying
the Intel callbacks.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230731091333.3593132-3-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The parameters are only the bus and the device number, manager ops may
need additional details on the type of peripheral connected, such as
whether it is wake-capable or not.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230731091333.3593132-2-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The SoundWire bus is handled with a dedicated device, which is placed
between the Intel auxiliary device and peripheral devices, e.g.
soundwire_intel.link.0/sdw-master-0/sdw:0:025d:0711:01
The functionality of this 'sdw-master' device is limited, specifically
for pm_runtime the ASoC framework will not rely on
pm_runtime_get_sync() since it does not register any components. It
will only change status thanks to the parent-child relationship which
guarantees that the 'sdw-master' device will be pm_runtime resumed
before any peripheral device.
However on startup and system resume it's possible that only the
auxiliary device is pm_runtime active, and the peripheral will only
become active during its io_init routine, leading to another
occurrence of the error reported by the pm_runtime framework:
rt711 sdw:0:025d:0711:00: runtime PM trying to activate child device
sdw:0:025d:0711:00 but parent (sdw-master-0) is not active
This patch suggests aligning the sdw-master device status to that of
the auxiliary device. The difference between the two is completely
notional and their pm_status shouldn't be different during the startup
and system resume steps.
This problem was exposed by recent changes in the timing of the bus
reset, but was present in this driver since we introduced pm_runtime
support.
Closes: https://github.com/thesofproject/linux/issues/4328
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Tested-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230803065220.3823269-3-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
As soon as the bus starts, physical peripheral devices may report as
ATTACHED and set their status with pm_runtime_set_active() in their
update_status()/io_init().
This is problematic with the existing code, since the parent
pm_runtime status is changed to "active" after starting the bus. This
creates a time window where the pm_runtime framework can report an
issue, e.g.
"rt711 sdw:0:025d:0711:00: runtime PM trying to activate child device
sdw:0:025d:0711:00 but parent (sdw-master-0) is not active"
This patch enables runtime_pm earlier to make sure the auxiliary
device is pm_runtime active after powering-up, but before starting the
bus.
This problem was exposed by recent changes in the timing of the bus
reset, but was present in this driver since we introduced pm_runtime
support.
Closes: https://github.com/thesofproject/linux/issues/4328
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Tested-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230803065220.3823269-2-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The DT of_device.h and of_platform.h date back to the separate
of_platform_bus_type before it as merged into the regular platform bus.
As part of that merge prepping Arm DT support 13 years ago, they
"temporarily" include each other. They also include platform_device.h
and of.h. As a result, there's a pretty much random mix of those include
files used throughout the tree. In order to detangle these headers and
replace the implicit includes with struct declarations, users need to
explicitly include the correct includes.
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230714174946.4063995-1-robh@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
This code has two problems:
1) The devm_ioremap() function returns NULL, not error pointers.
2) It's checking the wrong variable. ->mmio instead of ->acp_mmio.
Fixes: d8f48fbdfd ("soundwire: amd: Add support for AMD Manager driver")
Suggested-by: "Mukunda,Vijendar" <vijendar.mukunda@amd.com>
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/9863b2bf-0de2-4bf8-8f09-fe24dc5c63ff@moroto.mountain
Signed-off-by: Vinod Koul <vkoul@kernel.org>
SoundWire device status can be incorrectly updated without
proper mask, fix this by adding a mask before updating the status.
Fixes: c7d49c76d1 ("soundwire: qcom: add support to new interrupts")
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20230525133812.30841-2-srinivas.kandagatla@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The soundwire subsystem uses two completion structures that allow
drivers to wait for soundwire device to become enumerated on the bus and
initialised by their drivers, respectively.
The code implementing the signalling is currently broken as it does not
signal all current and future waiters and also uses the wrong
reinitialisation function, which can potentially lead to memory
corruption if there are still waiters on the queue.
Not signalling future waiters specifically breaks sound card probe
deferrals as codec drivers can not tell that the soundwire device is
already attached when being reprobed. Some codec runtime PM
implementations suffer from similar problems as waiting for enumeration
during resume can also timeout despite the device already having been
enumerated.
Fixes: fb9469e54f ("soundwire: bus: fix race condition with enumeration_complete signaling")
Fixes: a90def0681 ("soundwire: bus: fix race condition with initialization_complete signaling")
Cc: stable@vger.kernel.org # 5.7
Cc: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Cc: Rander Wang <rander.wang@linux.intel.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230705123018.30903-2-johan+linaro@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Always add buses to the stream->master_list in a fixed order.
The unique bus->id is used to order the adding of buses to the
list.
This prevents lockdep asserts and possible deadlocks on streams
that have multiple buses.
sdw_acquire_bus_lock() takes bus_lock in the order that buses
are listed in stream->master_list. do_bank_switch() takes all
the msg_lock in the same order.
To prevent a lockdep assert, and a possible real deadlock, the
relative order of taking these mutexes must always be the same.
For example, if a stream takes the mutexes in the order
(bus0, bus1) lockdep will assert if another stream takes them
in the order (bus1, bus0).
More complex relative ordering will also assert, for example
if two streams take (bus0, bus1) and (bus1, bus2), then a third
stream takes (bus2, bus0).
Previously sdw_stream_add_master() simply added the given bus
to the end of the list, requiring the caller to guarantee that
buses are added in a fixed order. This isn't reasonable or
necessary - it's an internal implementation detail that should
not be exposed by the API. It doesn't really make sense when
there could be multiple independent calling drivers, to say
"you must add your buses in the same order as a different driver,
that you don't know about, added them".
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230615141208.679011-2-rf@opensource.cirrus.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Give the bus_lock and msg_lock of each bus a different unique key
so that it is possible to acquire the locks of multiple buses
without lockdep asserting a possible deadlock.
Using mutex_init() to initialize a mutex gives all those mutexes
the same lock class. Lockdep checking treats it as an error to
attempt to take a mutex while already holding a mutex of the same
class. This causes a lockdep assert when sdw_acquire_bus_lock()
attempts to lock multiple buses, and when do_bank_switch() takes
multiple msg_lock.
[ 138.697350] WARNING: possible recursive locking detected
[ 138.697366] 6.3.0-test #1 Tainted: G E
[ 138.697380] --------------------------------------------
[ 138.697394] play/903 is trying to acquire lock:
[ 138.697409] ffff99b8c41aa8c8 (&bus->bus_lock){+.+.}-{3:3}, at:
sdw_prepare_stream+0x52/0x2e0
[ 138.697443]
but task is already holding lock:
[ 138.697468] ffff99b8c41af8c8 (&bus->bus_lock){+.+.}-{3:3}, at:
sdw_prepare_stream+0x52/0x2e0
[ 138.697493]
other info that might help us debug this:
[ 138.697521] Possible unsafe locking scenario:
[ 138.697540] CPU0
[ 138.697550] ----
[ 138.697559] lock(&bus->bus_lock);
[ 138.697570] lock(&bus->bus_lock);
[ 138.697581]
*** DEADLOCK ***
Giving each mutex a unique key allows multiple to be held
without triggering a lockdep assert. But note that it does not
allow them to be taken in one order then a different order.
If two mutexes are taken in the order A, B then they must
always be taken in that order otherwise they could deadlock.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230615141208.679011-1-rf@opensource.cirrus.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The 'qcom_swrm_ctrl->pconfig' has size of QCOM_SDW_MAX_PORTS (14),
however we index it starting from 1, not 0, to match real port numbers.
This can lead to writing port config past 'pconfig' bounds and
overwriting next member of 'qcom_swrm_ctrl' struct. Reported also by
smatch:
drivers/soundwire/qcom.c:1269 qcom_swrm_get_port_config() error: buffer overflow 'ctrl->pconfig' 14 <= 14
Fixes: 9916c02ccd ("soundwire: qcom: cleanup internal port config indexing")
Cc: <stable@vger.kernel.org>
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <error27@gmail.com>
Link: https://lore.kernel.org/r/202305201301.sCJ8UDKV-lkp@intel.com/
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230601102525.609627-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The ace2x driver can be build with or without mlink support, but
when SND_SOC_SOF_HDA_MLINK is set to =m and soundwire is built-in,
it fails with a link error:
ld.lld: error: undefined symbol: hdac_bus_eml_sdw_wait_syncpu_unlocked
>>> referenced by intel_ace2x.c
>>> drivers/soundwire/intel_ace2x.o:(intel_link_power_up) in archive vmlinux.a
ld.lld: error: undefined symbol: hdac_bus_eml_sdw_sync_arm_unlocked
>>> referenced by intel_ace2x.c
>>> drivers/soundwire/intel_ace2x.o:(intel_sync_arm) in archive vmlinux.a
Add a Kconfig dependency that prevents that broken configuration but
still allows soundwire to be a loadable module instead.
Fixes: 4d1e2464a1 ("soundwire: intel_ace2x: add sync_arm/sync_go helpers")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20230616090932.2714714-1-arnd@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
There is a lot of code using gotos to skip small sections of code, this
is a fairly dubious use of a goto, especially when the level of
intentation is really low. Most of this code doesn't even breach 80
characters when naively shifted over.
Simplify the code a bit, by replacing these unnecessary gotos with
simple ifs.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230602101140.2040141-5-ckeepax@opensource.cirrus.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
sdw_stream_add_slave/master have flags to indicate if the master or
slave runtime where allocated in that call to the function. Currently
these flags are cleared on all the paths where the runtime is not
allocated, it is more logic and simpler to set the flag on the one path
where the runtime is allocated.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230602101140.2040141-4-ckeepax@opensource.cirrus.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Version of the code prior to commit d014688eb3 ("soundwire: stream:
remove bus->dev from logs on multiple buses"), used bus->dev in the
error message after do_bank_switch, this necessitated some checking to
ensure the bus pointer was valid. As the code no longer uses bus->dev
said checking is now redundant, so remove it.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230602101140.2040141-3-ckeepax@opensource.cirrus.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The block_offset variable in _sdw_compute_port_params adds nothing
either functionally or in terms of code clarity, remove it.
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230602101140.2040141-2-ckeepax@opensource.cirrus.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The current path that skips allocating the slave runtime does not clear
the alloc_slave_rt flag, this is clearly incorrect. Add the missing
clear, so the runtime won't be erroneously cleaned up.
Fixes: f3016b891c ("soundwire: stream: sdw_stream_add_ functions can be called multiple times")
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230602101140.2040141-1-ckeepax@opensource.cirrus.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
We want to wait for the CONFIG_UPDATE bit to clear before doing
something else.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230518024119.164160-4-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Combining hardware reset with the multi-link mode leads to a shortened
hardware reset pattern observed on the bus.
The updated hardware programming sequence is to first enable the clock
with the sync_arm/sync_go pattern, and only in a second step to issue
the hardware reset sequence. Since there is no longer a dependency
between sync_arm/sync_go and hw_reset, the behavior of
sdw_cdns_exit_reset() is changed to wait for the self-clearing
CONFIG_UPDATE to go back to zero,
Link: https://github.com/thesofproject/linux/issues/4170
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230518024119.164160-3-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
It's not clear why we enabled interrupts in the Cadence IP first. The
logical programming sequence should be to first start the bus, and
only second to enable the interrupts.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230518024119.164160-2-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
We use __func__ in all calls of sdw_cdns_check_self_clearing_bits(),
except in one case. Likely an editing miss when the code was
refactored.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230518024215.164281-1-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Returning an error code in the remove callback yields to an error
message
remove callback returned a non-zero value. This will be ignored.
After that the device is removed anyhow. Improve the error message to at
least say what the actual problem is. While touching that code, convert
the driver to the .remove_new() callback which returns no value with the
same effect as returning zero in a .remove() callback.
As the return value is ignored by the core the only effect of this patch
is to improve the error message. (And the motivating effect is that
there is one less driver using .remove().)
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230518200823.249795-1-u.kleine-koenig@pengutronix.de
Signed-off-by: Vinod Koul <vkoul@kernel.org>
If pm_runtime_resume_and_get() failed with -EACCES, the driver continued
execution and finally called pm_runtime_put_autosuspend(). Since
pm_runtime_resume_and_get() drops the usage counter on every error, this
lead to double decrement of that counter.
Fixes: b275bf45ba ("soundwire: debugfs: Switch to sdw_read_no_pm")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230517163750.997629-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
This reverts commit 57ed510b05 ("soundwire: qcom: use
pm_runtime_resume_and_get()") which introduced unbalanced
pm_runtime_put(), when device did not have runtime PM enabled.
If pm_runtime_resume_and_get() failed with -EACCES, the driver continued
execution and finally called pm_runtime_put_autosuspend(). Since
pm_runtime_resume_and_get() drops the usage counter on every error, this
lead to double decrement of that counter visible in certain debugfs
actions on unattached devices (still in reset state):
$ cat /sys/kernel/debug/soundwire/master-0-0/sdw:0:0217:f001:00:0/registers
qcom-soundwire 3210000.soundwire-controller: swrm_wait_for_wr_fifo_avail err write overflow
soundwire sdw-master-0: trf on Slave 1 failed:-5 read addr e36 count 1
soundwire sdw:0:0217:f001:00:0: Runtime PM usage count underflow!
Fixes: 57ed510b05 ("soundwire: qcom: use pm_runtime_resume_and_get()")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230517163750.997629-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
WSA Soundwire controller needs an full reset if clock stop support
is not available in slave devices. WSA881x does not support clock stop
however WSA883x supports clock stop.
Make setting this flag at runtime to address above issue.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20230525133812.30841-5-srinivas.kandagatla@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Sometimes Hard reset does not clear some of the registers,
this sometimes results in firing a bus clash interrupt.
Add workaround for this during power up sequence, as
suggested by hardware manual.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20230525133812.30841-4-srinivas.kandagatla@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Wait for Fifo to be empty before going to suspend or before bank
switch happens. Just to make sure that all the reads/writes are done.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20230525133812.30841-3-srinivas.kandagatla@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Drop unused members from the driver state container: struct qcom_swrm_ctrl.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230515132000.399745-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Start from ACE1.x, DOAISE is added to AC timing control
register bit 5, it combines with DOAIS to get effective
timing, and has the default value 1.
The current code fills DOAIS, DACTQE and DODS bits to a
variable initialized to zero, and updates the variable
to AC timing control register. With this operation, We
change DOAISE to 0, and force a much more aggressive
timing. The timing is even unable to form a working
waveform on SDA pin on Meteorlake.
This patch uses read-modify-write operation for the AC
timing control register access, thus makes sure those
bits not supposed and intended to change are not touched.
Signed-off-by: Chao Song <chao.song@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230515081301.12921-1-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The interface is not needed for IPC3 solution but will be needed with
an updated parameter list for ACE2.x+IPC4 combinations.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230515071042.2038-26-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The interface is not needed for IPC3 solutions but will be needed
with an updated parameter list for ACE2.x+IPC4 combinations.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230515071042.2038-24-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
An earlier simplification to only pass the direction is no longer
suitable, all the ACE2.x HDaudio DMA management relies on access to
the substream structure.
This patch is an iso-functionality change, the HDaudio DMA parts will
be provided separately.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230515071042.2038-23-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Add the abstraction needed to only program the LSDIID registers for
the HDaudio extended links. It's perfectly fine to program this
register multiple times in case devices lose sync and reattach.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230515071042.2038-21-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
When a peripheral reports as ATTACHED, the manager may need to follow
a programming sequence, e.g. to assign DMA resources and/or assign a
command queue for that peripheral.
This patch adds an optional callback, which will be invoked every time
the peripheral attaches. This might be overkill in some scenarios, and
one could argue that this should be invoked only on the first
attachment. The bus does not however track this first attachment with
any existing state-mirroring variable, and using dev_num_sticky would
not work across suspend-resume cycles.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230515071042.2038-20-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
This is the last callback needed for all bus management routines on
new hardware. Same concept as before, just different register.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230515071042.2038-19-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The WAKEEN and WAKESTS registers were moved to the per-link SHIM_VS
area.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230515071042.2038-18-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The sequences are so far identical, so the abstraction is a bit
over-engineered. In time we will simplify if there is no need to
special case or work-around programming sequences.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230515071042.2038-17-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Same functionality as before, but with the registers moved to the
HDaudio multi-link area.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230515071042.2038-16-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The code is similar to the previous implementation, the only
difference is that the PDI descriptors are now in different areas.
Using common helpers proves tricky with multiple changed registers,
workarounds that are no longer necessary. It's simpler to duplicate
the intel_register_dai() function rather than try to add multiple
levels of abstraction and indirections.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230515071042.2038-15-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
