Architecture documentation suggests that hsa_size has been available in
the read info since the list-directed ipl dump has been introduced. By
using this value few early sclp calls could be avoided.
Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Reviewed-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Using .bss in early code should be avoided. It might overlay initrd
image or not yet be initialized. Clean up the last couple of places in
the decompressor's code where .bss is used and enfore no .bss usage
check on boot/compressed/misc.c. In particular:
- initializing free_mem_ptr and free_mem_end_ptr with values guarantee
that these variables won't end up in the .bss section.
- define STATIC_RW_DATA to go into .data section.
Reviewed-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
The kernel decompressor has to know several bits of information about
uncompressed image. Currently this info is collected by running "nm" on
uncompressed vmlinux + "sed" and producing sizes.h file. This method
worked well, but it has several disadvantages. Obscure symbols name
pattern matching is fragile. Adding new values makes pattern even
longer. Logic is spread across code and make file. Limited ability to
adjust symbols values (currently magic lma value of 0x100000 is always
subtracted). Apart from that same pieces of information (and more)
would be needed for early memory detection and features like KASLR
outside of boot/compressed/ folder where sizes.h is generated.
To overcome limitations new "struct vmlinux_info" has been introduced
to include values needed for the decompressor and the rest of the
boot code. The only static instance of vmlinux_info is produced during
vmlinux link step by filling in struct fields by the linker (like it is
done with input_data in boot/compressed/vmlinux.scr.lds.S). This way
individual values could be adjusted with all the knowledge linker has
and arithmetic it supports. Later .vmlinux.info section (which contains
struct vmlinux_info) is transplanted into the decompressor image and
dropped from uncompressed image altogether.
While doing that replace "compressed/vmlinux.scr.lds.S" linker
script (whose purpose is to rename .data section in piggy.o to
.rodata.compressed) with plain objcopy command. And simplify
decompressor's linker script.
Reviewed-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Decompressor's head.S provided "data mover" sole purpose of which has
been to safely move uncompressed kernel at 0x100000 and jump to it.
With current bzImage layout entire decompressor's code guaranteed to be
in a safe location under 0x100000, and hence could not be overwritten
during kernel move. For that reason head.S could be replaced with simple
memmove function. To do so introduce early boot code phase which is
executed from arch/s390/boot/head.S after "verify_facilities" and takes
care of optional kernel image decompression and transition to it.
Reviewed-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Remove STACK_ORDER and STACK_SIZE in favour of identical THREAD_SIZE_ORDER
and THREAD_SIZE definitions. THREAD_SIZE and THREAD_SIZE_ORDER naming is
misleading since it is used as general kernel stack size information. But
both those definitions are used in the common code and throughout
architectures specific code, so changing the naming is problematic.
Reviewed-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
With virtually mapped kernel stacks the kernel stack overflow detection
is now fault based, every stack has a guard page in the vmalloc space.
The panic_stack is renamed to nodat_stack and is used for all function
that need to run without DAT, e.g. memcpy_real or do_start_kdump.
The main effect is a reduction in the kernel image size as with vmap
stacks the old style overflow checking that adds two instructions per
function is not needed anymore. Result from bloat-o-meter:
add/remove: 20/1 grow/shrink: 13/26854 up/down: 2198/-216240 (-214042)
In regard to performance the micro-benchmark for fork has a hit of a
few microseconds, allocating 4 pages in vmalloc space is more expensive
compare to an order-2 page allocation. But with real workload I could
not find a noticeable difference.
Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
With CONFIG_VMAP_STACK=y the kernel stack of all tasks should be
allocated in the vmalloc space. The initial stack used for all
the early init code is in the init_thread_union. To be able to
switch from this early stack to a properly allocated stack
from vmalloc the architecture needs a switch-over point.
Introduce the arch_call_rest_init() function with a weak definition
in init/main.c with the only purpose to call rest_init() from the
end of start_kernel(). The architecture override can then do the
necessary magic to switch to the new vmalloc'ed stack.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
With CONFIG_VMAP_STACK=y the stack is allocated from the vmalloc space.
Data structures passed to a hardware or a hypervisor interface that
requires V=R can not be allocated on the stack anymore.
Make the init and fini pfault parameter blocks static variables.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
With CONFIG_VMAP_STACK=y the stack is allocated from the vmalloc space.
Data structures passed to a hardware or a hypervisor interface that
requires V=R can not be allocated on the stack anymore.
Use kmalloc to get memory for the appldata_parameter_list and
appldata_product_id structures.
Reviewed-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
With CONFIG_VMAP_STACK=y the stack is allocated from the vmalloc space.
Data structures passed to a hardware or a hypervisor interface that
requires V=R can not be allocated on the stack anymore.
Use kmalloc to get memory for the hypsfs_diag304 structure.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
With CONFIG_VMAP_STACK=y the stack is allocated from the vmalloc space.
Data structures passed to a hardware or a hypervisor interface that
requires V=R can not be allocated on the stack anymore.
Use kmalloc to get memory for the appldata_product_id and the
appldata_parameter_list structures.
Reviewed-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
In preparation for CONFIG_VMAP_STACK=y move the allocation of the
struct appldata_parameter_list to the caller of appldata_asm().
Reviewed-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Provide function to find a ccwgroup device by its busid.
Acked-by: Sebastian Ott <sebott@linux.ibm.com>
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
This patch is an extension to the zcrypt device driver to provide,
support and maintain multiple zcrypt device nodes. The individual
zcrypt device nodes can be restricted in terms of crypto cards,
domains and available ioctls. Such a device node can be used as a
base for container solutions like docker to control and restrict
the access to crypto resources.
The handling is done with a new sysfs subdir /sys/class/zcrypt.
Echoing a name (or an empty sting) into the attribute "create" creates
a new zcrypt device node. In /sys/class/zcrypt a new link will appear
which points to the sysfs device tree of this new device. The
attribute files "ioctlmask", "apmask" and "aqmask" in this directory
are used to customize this new zcrypt device node instance. Finally
the zcrypt device node can be destroyed by echoing the name into
/sys/class/zcrypt/destroy. The internal structs holding the device
info are reference counted - so a destroy will not hard remove a
device but only marks it as removable when the reference counter drops
to zero.
The mask values are bitmaps in big endian order starting with bit 0.
So adapter number 0 is the leftmost bit, mask is 0x8000... The sysfs
attributes accept 2 different formats:
* Absolute hex string starting with 0x like "0x12345678" does set
the mask starting from left to right. If the given string is shorter
than the mask it is padded with 0s on the right. If the string is
longer than the mask an error comes back (EINVAL).
* Relative format - a concatenation (done with ',') of the
terms +<bitnr>[-<bitnr>] or -<bitnr>[-<bitnr>]. <bitnr> may be any
valid number (hex, decimal or octal) in the range 0...255. Here are
some examples:
"+0-15,+32,-128,-0xFF"
"-0-255,+1-16,+0x128"
"+1,+2,+3,+4,-5,-7-10"
A simple usage examples:
# create new zcrypt device 'my_zcrypt':
echo "my_zcrypt" >/sys/class/zcrypt/create
# go into the device dir of this new device
echo "my_zcrypt" >create
cd my_zcrypt/
ls -l
total 0
-rw-r--r-- 1 root root 4096 Jul 20 15:23 apmask
-rw-r--r-- 1 root root 4096 Jul 20 15:23 aqmask
-r--r--r-- 1 root root 4096 Jul 20 15:23 dev
-rw-r--r-- 1 root root 4096 Jul 20 15:23 ioctlmask
lrwxrwxrwx 1 root root 0 Jul 20 15:23 subsystem -> ../../../../class/zcrypt
...
# customize this zcrypt node clone
# enable only adapter 0 and 2
echo "0xa0" >apmask
# enable only domain 6
echo "+6" >aqmask
# enable all 256 ioctls
echo "+0-255" >ioctls
# now the /dev/my_zcrypt may be used
# finally destroy it
echo "my_zcrypt" >/sys/class/zcrypt/destroy
Please note that a very similar 'filtering behavior' also applies to
the parent z90crypt device. The two mask attributes apmask and aqmask
in /sys/bus/ap act the very same for the z90crypt device node. However
the implementation here is totally different as the ap bus acts on
bind/unbind of queue devices and associated drivers but the effect is
still the same. So there are two filters active for each additional
zcrypt device node: The adapter/domain needs to be enabled on the ap
bus level and it needs to be active on the zcrypt device node level.
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
I've stumbled over this too many times now... AOBs are only ever used on
Output Queues. So in qdio_kick_handler(), move the call to their handler
into the Output-only path, and get rid of the convoluted contains_aobs()
helper. No functional change.
While at it, also remove
1. the unused sbal_state->aob field. For processing an async completion,
upper-layer drivers get their AOB pointer from the CQ buffer.
2. an unused EXPORT for qdio_allocate_aob(). External users would have
no way of passing an allocated AOB back into qdio.ko anyways...
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Correct stack frame overhead for 31-bit vdso, which should be 96 rather
then 160. This is done by reusing STACK_FRAME_OVERHEAD definition which
contains correct value based on build flags. This fixes stack unwinding
within vdso code for 31-bit processes. While at it replace all hard coded
stack frame overhead values with the same definition in vdso64 as well.
Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
vdso_fault used is_compat_task function (on s390 it tests "current"
thread_info flags) to distinguish compat tasks and map 31-bit vdso
pages. But "current" task might not correspond to mm context.
When 31-bit compat inferior is executed under gdb, gdb does
PTRACE_PEEKTEXT on vdso page, causing vdso_fault with "current" being
64-bit gdb process. So, 31-bit inferior ends up with 64-bit vdso mapped.
To avoid this problem a new compat_mm flag has been introduced into
mm context. This flag is used in vdso_fault and vdso_mremap instead
of is_compat_task.
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
The AP bus scan is aborted before doing anything worth mentioning if
ap_select_domain() fails, e.g. if the ap_rights.aqm mask is all zeros.
As the result of this the ap bus fails to manage (e.g. create and
register) devices like it is supposed to.
Let us make ap_scan_bus() work even if ap_select_domain() can't select a
default domain. Let's also make ap_select_domain() return void, as there
are no more callers interested in its return value.
Signed-off-by: Halil Pasic <pasic@linux.ibm.com>
Reported-by: Michael Mueller <mimu@linux.ibm.com>
Fixes: 7e0bdbe5c2 "s390/zcrypt: AP bus support for alternate driver(s)"
[freude@linux.ibm.com: title and patch header slightly modified]
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
To be able to start a kernel image loaded into memory with a
PSW restart, place a 64-bit restart PSW at 0x1a0 in absolute
lowcore.
Suggested-by: Dominik Klein <dominik.klein@linux.ibm.com>
Tested-by: Dominik Klein <dominik.klein@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Trivial fix to spelling mistake in message text
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Use the common code ARRAY_SIZE macro instead of a private implementation.
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: zhong jiang <zhongjiang@huawei.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
kmemdup has implemented the function that kmalloc() + memcpy() will
do. We prefer to use the kmemdup function rather than an open coded
implementation.
Signed-off-by: zhong jiang <zhongjiang@huawei.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
The SCLP event 24 "Adapter Error Notification" supports three different
action qualifier of which 'adapter reset' is currently not enabled in
the sysfs interface. However, userspace tools might want to be able
to use the reset functionality as well. Enable the 'adapter reset'
qualifier.
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Reviewed-by: Sebastian Ott <sebott@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
kmem_cache_destroy() can handle NULL pointer correctly, so there is
no need to check NULL pointer before calling kmem_cache_destroy().
Signed-off-by: Chengguang Xu <cgxu519@gmx.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
The resume code checks if the resume cpu is the same as the suspend cpu.
If not, and if it is also not possible to switch to the suspend cpu, an
error message should be printed and the resume process should be stopped
by loading a disabled wait psw.
The current logic is broken in multiple ways, the message is never printed,
and the disabled wait psw never loaded because the kernel panics before that:
- sam31 and SIGP_SET_ARCHITECTURE to ESA mode is wrong, this will break
on the first 64bit instruction in sclp_early_printk().
- The init stack should be used, but the stack pointer is not set up correctly
(missing aghi %r15,-STACK_FRAME_OVERHEAD).
- __sclp_early_printk() checks the sclp_init_state. If it is not
sclp_init_state_uninitialized, it simply returns w/o printing anything.
In the resumed kernel however, sclp_init_state will never be uninitialized.
This patch fixes those issues by removing the sam31/ESA logic, adding a
correct init stack pointer, and also introducing sclp_early_printk_force()
to allow using sclp_early_printk() even when sclp_init_state is not
uninitialized.
Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
driver
- Make sure of_node_get/put() calls are balanced in the partition
parsing code
- Fix a race in the denali NAND controller driver
- Fix false positive WARN_ON() in the marvell NAND controller driver
-----BEGIN PGP SIGNATURE-----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=p43N
-----END PGP SIGNATURE-----
Merge tag 'mtd/fixes-for-4.19-rc5' of git://git.infradead.org/linux-mtd
Boris writes:
"- Fixes a bug in the ->read/write_reg() implementation of the m25p80
driver
- Make sure of_node_get/put() calls are balanced in the partition
parsing code
- Fix a race in the denali NAND controller driver
- Fix false positive WARN_ON() in the marvell NAND controller driver"
* tag 'mtd/fixes-for-4.19-rc5' of git://git.infradead.org/linux-mtd:
mtd: devices: m25p80: Make sure the buffer passed in op is DMA-able
mtd: partitions: fix unbalanced of_node_get/put()
mtd: rawnand: denali: fix a race condition when DMA is kicked
mtd: rawnand: marvell: prevent harmless warnings
here comes a collection of various fixes, mostly for stable-tree
or regression fixes.
Two relatively high LOCs are about the (rather simple) conversion of
uapi integer types in topology API, and a regression fix about HDMI
hotplug notification on AMD HD-audio. The rest are all small
individual fixes like ASoC Intel Skylake race condition, minor
uninitialized page leak in emu10k1 ioctl, Firewire audio error paths,
and so on.
-----BEGIN PGP SIGNATURE-----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=Qk/8
-----END PGP SIGNATURE-----
Merge tag 'sound-4.19-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Takashi writes:
"sound fixes for 4.19-rc5
here comes a collection of various fixes, mostly for stable-tree
or regression fixes.
Two relatively high LOCs are about the (rather simple) conversion of
uapi integer types in topology API, and a regression fix about HDMI
hotplug notification on AMD HD-audio. The rest are all small
individual fixes like ASoC Intel Skylake race condition, minor
uninitialized page leak in emu10k1 ioctl, Firewire audio error paths,
and so on."
* tag 'sound-4.19-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (33 commits)
ALSA: fireworks: fix memory leak of response buffer at error path
ALSA: oxfw: fix memory leak of discovered stream formats at error path
ALSA: oxfw: fix memory leak for model-dependent data at error path
ALSA: bebob: fix memory leak for M-Audio FW1814 and ProjectMix I/O at error path
ALSA: hda - Enable runtime PM only for discrete GPU
ALSA: oxfw: fix memory leak of private data
ALSA: firewire-tascam: fix memory leak of private data
ALSA: firewire-digi00x: fix memory leak of private data
sound: don't call skl_init_chip() to reset intel skl soc
sound: enable interrupt after dma buffer initialization
Revert "ASoC: Intel: Skylake: Acquire irq after RIRB allocation"
ALSA: emu10k1: fix possible info leak to userspace on SNDRV_EMU10K1_IOCTL_INFO
ASoC: cs4265: fix MMTLR Data switch control
ASoC: AMD: Ensure reset bit is cleared before configuring
ALSA: fireface: fix memory leak in ff400_switch_fetching_mode()
ALSA: bebob: use address returned by kmalloc() instead of kernel stack for streaming DMA mapping
ASoC: rsnd: don't fallback to PIO mode when -EPROBE_DEFER
ASoC: rsnd: adg: care clock-frequency size
ASoC: uniphier: change status to orphan
ASoC: rsnd: fixup not to call clk_get/set under non-atomic
...
A couple of small but important fixes, one affecting big endian and
the other fixing a BUG_ON in scatterlist processing.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCW6IviSYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishdrPAP4h8ouR
z4qewZsVK9hwySouIfC2xAPRu7aFUBEPw12O4gEAshqLg/61w7PYS0t9NjQVpRw3
nR6xr6ymTbImn09w1Wg=
=MQ30
-----END PGP SIGNATURE-----
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
James writes:
"SCSI fixes on 20180919
A couple of small but important fixes, one affecting big endian and
the other fixing a BUG_ON in scatterlist processing.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>"
Crypto stuff from Herbert:
"This push fixes a potential boot hang in ccp and an incorrect
CPU capability check in aegis/morus on x86."
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: x86/aegis,morus - Do not require OSXSAVE for SSE2
crypto: ccp - add timeout support in the SEV command
a huge latency in the system because it does a while loop to free pages
without releasing the CPU (on non preempt kernels). In a case where there
are hundreds of thousands of pages to free it could actually cause a system
stall. A properly place cond_resched() solves this issue.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCW6GGJhQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qo2dAQDN4SUsItEc28ij5vYKoP1mSLt8aax1
1UoIHrh1pTLUMQD+PSlbtZnUq27vfGwyEFrIWLQ5eeDy3IESkQzoXWcs0gY=
=HpN3
-----END PGP SIGNATURE-----
Merge tag 'trace-v4.19-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Steven writes:
"Vaibhav Nagarnaik found that modifying the ring buffer size could cause
a huge latency in the system because it does a while loop to free pages
without releasing the CPU (on non preempt kernels). In a case where there
are hundreds of thousands of pages to free it could actually cause a system
stall. A properly place cond_resched() solves this issue."
Free allocated ACPI buffers in two drivers.
The following is an automated git shortlog grouped by driver:
alienware-wmi:
- Correct a memory leak
dell-smbios-wmi:
- Correct a memory leak
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJboX3QAAoJEKbMaAwKp364hGwH/0CydzV81cQNsZijbLG7cZGW
FF4cRwsdHGbjq2jwi1OWGV9zGUrIrambL3WjXCjogU8T+iOSt/ng+TslBgwuhc/T
d/bggNuV0jw+2oKVpdHVRCedEVlhUqLJBn/8VInBcHP30vOKUNdzZSIymJvpYksi
wCJph04RsKN2BR2rtyiKRuQO4iKuaRfAcQz2CPg5aUftQ1im/+Ksj5OuhcYYq0m5
lo8s8ZphzRHORkoTwNVP8zsdubH83FJeR6S4WVQmcqzK6TfKgmOldR3CKqmaZUcl
bbQ8ky9MA3GtYkaMafc8sViXQW0ugVplwaRs9gCdPIMnCzu0SWqa5RNXafjxHEQ=
=X2ER
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v4.19-2' of git://git.infradead.org/linux-platform-drivers-x86
Darren writes:
"platform-drivers-x86 for v4.19-2
Free allocated ACPI buffers in two drivers.
The following is an automated git shortlog grouped by driver:
alienware-wmi:
- Correct a memory leak
dell-smbios-wmi:
- Correct a memory leak"
* tag 'platform-drivers-x86-v4.19-2' of git://git.infradead.org/linux-platform-drivers-x86:
platform/x86: alienware-wmi: Correct a memory leak
platform/x86: dell-smbios-wmi: Correct a memory leak
As documented in spi-mem.h, spi_mem_op->data.buf.{in,out} must be
DMA-able, and commit 4120f8d158 ("mtd: spi-nor: Use the spi_mem_xx()
API") failed to follow this rule as buffers passed to
->{read,write}_reg() are usually placed on the stack.
Fix that by allocating a scratch buffer and copying the data around.
Fixes: 4120f8d158 ("mtd: spi-nor: Use the spi_mem_xx() API")
Reported-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Tested-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Reviewed-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Dave writes:
"Various fixes, all over the place:
1) OOB data generation fix in bluetooth, from Matias Karhumaa.
2) BPF BTF boundary calculation fix, from Martin KaFai Lau.
3) Don't bug on excessive frags, to be compatible in situations mixing
older and newer kernels on each end. From Juergen Gross.
4) Scheduling in RCU fix in hv_netvsc, from Stephen Hemminger.
5) Zero keying information in TLS layer before freeing copies
of them, from Sabrina Dubroca.
6) Fix NULL deref in act_sample, from Davide Caratti.
7) Orphan SKB before GRO in veth to prevent crashes with XDP,
from Toshiaki Makita.
8) Fix use after free in ip6_xmit, from Eric Dumazet.
9) Fix VF mac address regression in bnxt_en, from Micahel Chan.
10) Fix MSG_PEEK behavior in TLS layer, from Daniel Borkmann.
11) Programming adjustments to r8169 which fix not being to enter deep
sleep states on some machines, from Kai-Heng Feng and Hans de
Goede.
12) Fix DST_NOCOUNT flag handling for ipv6 routes, from Peter
Oskolkov."
* gitolite.kernel.org:/pub/scm/linux/kernel/git/davem/net: (45 commits)
net/ipv6: do not copy dst flags on rt init
qmi_wwan: set DTR for modems in forced USB2 mode
clk: x86: Stop marking clocks as CLK_IS_CRITICAL
r8169: Get and enable optional ether_clk clock
clk: x86: add "ether_clk" alias for Bay Trail / Cherry Trail
r8169: enable ASPM on RTL8106E
r8169: Align ASPM/CLKREQ setting function with vendor driver
Revert "kcm: remove any offset before parsing messages"
kcm: remove any offset before parsing messages
net: ethernet: Fix a unused function warning.
net: dsa: mv88e6xxx: Fix ATU Miss Violation
tls: fix currently broken MSG_PEEK behavior
hv_netvsc: pair VF based on serial number
PCI: hv: support reporting serial number as slot information
bnxt_en: Fix VF mac address regression.
ipv6: fix possible use-after-free in ip6_xmit()
net: hp100: fix always-true check for link up state
ARM: dts: at91: add new compatibility string for macb on sama5d3
net: macb: disable scatter-gather for macb on sama5d3
net: mvpp2: let phylink manage the carrier state
...
DST_NOCOUNT in dst_entry::flags tracks whether the entry counts
toward route cache size (net->ipv6.sysctl.ip6_rt_max_size).
If the flag is NOT set, dst_ops::pcpuc_entries counter is incremented
in dist_init() and decremented in dst_destroy().
This flag is tied to allocation/deallocation of dst_entry and
should not be copied from another dst/route. Otherwise it can happen
that dst_ops::pcpuc_entries counter grows until no new routes can
be allocated because the counter reached ip6_rt_max_size due to
DST_NOCOUNT not set and thus no counter decrements on gc-ed routes.
Fixes: 3b6761d18b ("net/ipv6: Move dst flags to booleans in fib entries")
Cc: David Ahern <dsahern@gmail.com>
Acked-by: Wei Wang <weiwan@google.com>
Signed-off-by: Peter Oskolkov <posk@google.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Recent firmware revisions have added the ability to force
these modems to USB2 mode, hiding their SuperSpeed
capabilities from the host. The driver has been using the
SuperSpeed capability, as shown by the bcdUSB field of the
device descriptor, to detect the need to enable the DTR
quirk. This method fails when the modems are forced to
USB2 mode by the modem firmware.
Fix by unconditionally enabling the DTR quirk for the
affected device IDs.
Reported-by: Fred Veldini <fred.veldini@gmail.com>
Reported-by: Deshu Wen <dwen@sierrawireless.com>
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Reported-by: Fred Veldini <fred.veldini@gmail.com>
Reported-by: Deshu Wen <dwen@sierrawireless.com>
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>
Hans de Goede says:
====================
r8169 (x86) clk fixes to fix S0ix not being reached
This series adds code to the r8169 ethernet driver to get and enable an
external clock if present, avoiding the need for a hack in the
clk-pmc-atom driver where that clock was left on continuesly causing x86
some devices to not reach deep power saving states (S0ix) when suspended
causing to them to quickly drain their battery while suspended.
The 3 commits in this series need to be merged in order to avoid
regressions while bisecting. The clk-pmc-atom driver does not see much
changes (it was last touched over a year ago). So the clk maintainers
have agreed with merging all 3 patches through the net tree.
All 3 patches have Stephen Boyd's Acked-by for this purpose.
This v2 of the series only had some minor tweaks done to the commit
messages and is ready for merging through the net tree now.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit d31fd43c0f ("clk: x86: Do not gate clocks enabled by the
firmware"), which added the code to mark clocks as CLK_IS_CRITICAL, causes
all unclaimed PMC clocks on Cherry Trail devices to be on all the time,
resulting on the device not being able to reach S0i3 when suspended.
The reason for this commit is that on some Bay Trail / Cherry Trail devices
the r8169 ethernet controller uses pmc_plt_clk_4. Now that the clk-pmc-atom
driver exports an "ether_clk" alias for pmc_plt_clk_4 and the r8169 driver
has been modified to get and enable this clock (if present) the marking of
the clocks as CLK_IS_CRITICAL is no longer necessary.
This commit removes the CLK_IS_CRITICAL marking, fixing Cherry Trail
devices not being able to reach S0i3 greatly decreasing their battery
drain when suspended.
Buglink: https://bugzilla.kernel.org/show_bug.cgi?id=193891#c102
Buglink: https://bugzilla.kernel.org/show_bug.cgi?id=196861
Cc: Johannes Stezenbach <js@sig21.net>
Cc: Carlo Caione <carlo@endlessm.com>
Reported-by: Johannes Stezenbach <js@sig21.net>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
On some boards a platform clock is used as clock for the r8169 chip,
this commit adds support for getting and enabling this clock (assuming
it has an "ether_clk" alias set on it).
This is related to commit d31fd43c0f ("clk: x86: Do not gate clocks
enabled by the firmware") which is a previous attempt to fix this for some
x86 boards, but this causes all Cherry Trail SoC using boards to not reach
there lowest power states when suspending.
This commit (together with an atom-pmc-clk driver commit adding the alias)
fixes things properly by making the r8169 get the clock and enable it when
it needs it.
Buglink: https://bugzilla.kernel.org/show_bug.cgi?id=193891#c102
Buglink: https://bugzilla.kernel.org/show_bug.cgi?id=196861
Cc: Johannes Stezenbach <js@sig21.net>
Cc: Carlo Caione <carlo@endlessm.com>
Reported-by: Johannes Stezenbach <js@sig21.net>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit d31fd43c0f ("clk: x86: Do not gate clocks enabled by the
firmware") causes all unclaimed PMC clocks on Cherry Trail devices to be on
all the time, resulting on the device not being able to reach S0i2 or S0i3
when suspended.
The reason for this commit is that on some Bay Trail / Cherry Trail devices
the ethernet controller uses pmc_plt_clk_4. This commit adds an "ether_clk"
alias, so that the relevant ethernet drivers can try to (optionally) use
this, without needing X86 specific code / hacks, thus fixing ethernet on
these devices without breaking S0i3 support.
This commit uses clkdev_hw_create() to create the alias, mirroring the code
for the already existing "mclk" alias for pmc_plt_clk_3.
Buglink: https://bugzilla.kernel.org/show_bug.cgi?id=193891#c102
Buglink: https://bugzilla.kernel.org/show_bug.cgi?id=196861
Cc: Johannes Stezenbach <js@sig21.net>
Cc: Carlo Caione <carlo@endlessm.com>
Reported-by: Johannes Stezenbach <js@sig21.net>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The Intel SoC was prevented from entering lower idle state because
of RTL8106E's ASPM was not enabled.
So enable ASPM on RTL8106E (chip version 39).
Now the Intel SoC can enter lower idle state, power consumption and
temperature are much lower.
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There's a small delay after setting ASPM in vendor drivers, r8101 and
r8168.
In addition, those drivers enable ASPM before ClkReq, also change that
to align with vendor driver.
I haven't seen anything bad becasue of this, but I think it's better to
keep in sync with vendor driver.
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The current code assumes kcm users know they need to look for the
strparser offset within their bpf program, which is not documented
anywhere and examples laying around do not do.
The actual recv function does handle the offset well, so we can create a
temporary clone of the skb and pull that one up as required for parsing.
The pull itself has a cost if we are pulling beyond the head data,
measured to 2-3% latency in a noisy VM with a local client stressing
that path. The clone's impact seemed too small to measure.
This bug can be exhibited easily by implementing a "trivial" kcm parser
taking the first bytes as size, and on the client sending at least two
such packets in a single write().
Note that bpf sockmap has the same problem, both for parse and for recv,
so it would pulling twice or a real pull within the strparser logic if
anyone cares about that.
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
When reducing ring buffer size, pages are removed by scheduling a work
item on each CPU for the corresponding CPU ring buffer. After the pages
are removed from ring buffer linked list, the pages are free()d in a
tight loop. The loop does not give up CPU until all pages are removed.
In a worst case behavior, when lot of pages are to be freed, it can
cause system stall.
After the pages are removed from the list, the free() can happen while
the work is rescheduled. Call cond_resched() in the loop to prevent the
system hangup.
Link: http://lkml.kernel.org/r/20180907223129.71994-1-vnagarnaik@google.com
Cc: stable@vger.kernel.org
Fixes: 83f40318da ("ring-buffer: Make removal of ring buffer pages atomic")
Reported-by: Jason Behmer <jbehmer@google.com>
Signed-off-by: Vaibhav Nagarnaik <vnagarnaik@google.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
As well as one driver fix there's a couple of fixes here which address
issues with the use of IDRs for allocation of dynamic bus numbers,
ensuring that dynamic bus numbers interact well with static bus numbers
assigned via DT and otherwise.
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAluf2foTHGJyb29uaWVA
a2VybmVsLm9yZwAKCRAk1otyXVSH0DooB/4/c+c9nX31WeKh5EUFS3WJUQ4quHC+
ZPS0rqliJm0KQxdSCU6ig2+xbobZWAs9T4ZXPlE7PNk6DmqdtATS5jlzbwmoLvdA
PvxsBwz3dRdIGR/BNbDYEZCb0WGtMHO6BR5c//lBCy+ea5oNENi0w0mFnY+AVeUt
ivM55i/nNmV4DReT3rl5mRz/TQgfI9zc11DPpqDnlQML3emYHmJ+hZa8/1g68d8C
lQHLIQMo6hGyOd3p6uPODGt98cDKIuYl9+fcYVzYFScNshwuMsxTDUXpkhv85Frb
QV6LGlikaEQBh9X9BHjzTHMBqbTFVLX/I+jRC/vK2G21862rfOt3R6vh
=rRj7
-----END PGP SIGNATURE-----
Merge tag 'spi-fix-v4.19-rc4' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Mark writes:
"spi: Fixes for v4.19
As well as one driver fix there's a couple of fixes here which address
issues with the use of IDRs for allocation of dynamic bus numbers,
ensuring that dynamic bus numbers interact well with static bus numbers
assigned via DT and otherwise."
* tag 'spi-fix-v4.19-rc4' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: spi-fsl-dspi: fix broken DSPI_EOQ_MODE
spi: Fix double IDR allocation with DT aliases
spi: fix IDR collision on systems with both fixed and dynamic SPI bus numbers
This is the usual set of small fixes scatterd around various drivers,
plus one fix for DAPM and a UAPI build fix. There's not a huge amount
that stands out here relative to anything else.
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAluf2AQTHGJyb29uaWVA
a2VybmVsLm9yZwAKCRAk1otyXVSH0BojB/9ZpiRgSSjKTFSmGgu3OFI7Nvj63ruB
hxOnwOc8Bea8tZtpzgEcx/aLZ1sbWVT4uRUYZv0Tf6UJtuOQagbJDEUkUdRitKtX
1khSMyKFlAa7cIbv19ZOMCN0pjcs7hlHCPryT8AyCWCWN8yPdlUsDqWfyfUoq56r
qpdu/OQ4E9VvS8OcX1gPjcop3gE/fYEoU+mbUpr0KYUXaroEzJm85tOqpGYk4+XW
GCNUR19vNRJr5G6ANqIx96JOlgF5nRZu7aOfvLceiWH5BgPdW3iNRAJkPmKCIHwb
a1+X21eCC7Ec2/7bQmR5Aoxz1yqzhngrevSFNLrqXFZmMmNrEfkfdCrJ
=gVzO
-----END PGP SIGNATURE-----
Merge tag 'asoc-v4.19-rc4' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v4.19
This is the usual set of small fixes scatterd around various drivers,
plus one fix for DAPM and a UAPI build fix. There's not a huge amount
that stands out here relative to anything else.
Fix the following compile warning:
drivers/net/ethernet/microchip/lan743x_main.c:2964:12: warning: lan743x_pm_suspend defined but not used [-Wunused-function]
static int lan743x_pm_suspend(struct device *dev)
drivers/net/ethernet/microchip/lan743x_main.c:2987:12: warning: lan743x_pm_resume defined but not used [-Wunused-function]
static int lan743x_pm_resume(struct device *dev)
Signed-off-by: zhong jiang <zhongjiang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
