mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-11 21:14:07 +08:00
3ab481a1cf
279 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Andi Kleen
|
3ab481a1cf |
perf script: Support insn output for normal samples
perf script -F +insn was only working for PT traces because the PT
instruction decoder was filling in the insn/insn_len sample attributes.
Support it for non PT samples too on x86 using the existing x86
instruction decoder.
This adds some extra checking to ensure that we don't try to decode
instructions when using perf.data from a different architecture.
% perf record -a sleep 1
% perf script -F ip,sym,insn --xed
ffffffff811704c9 remote_function movl %eax, 0x18(%rbx)
ffffffff8100bb50 intel_bts_enable_local retq
ffffffff81048612 native_apic_mem_write movl %esi, -0xa04000(%rdi)
ffffffff81048612 native_apic_mem_write movl %esi, -0xa04000(%rdi)
ffffffff81048612 native_apic_mem_write movl %esi, -0xa04000(%rdi)
ffffffff810f1f79 generic_exec_single xor %eax, %eax
ffffffff811704c9 remote_function movl %eax, 0x18(%rbx)
ffffffff8100bb34 intel_bts_enable_local movl 0x2000(%rax), %edx
ffffffff81048610 native_apic_mem_write mov %edi, %edi
...
Committer testing:
Before:
# perf script -F ip,sym,insn --xed | head -5
ffffffffa4068804 native_write_msr addb %al, (%rax)
ffffffffa4068804 native_write_msr addb %al, (%rax)
ffffffffa4068804 native_write_msr addb %al, (%rax)
ffffffffa4068806 native_write_msr addb %al, (%rax)
ffffffffa4068806 native_write_msr addb %al, (%rax)
# perf script -F ip,sym,insn --xed | grep -v "addb %al, (%rax)"
#
After:
# perf script -F ip,sym,insn --xed | head -5
ffffffffa4068804 native_write_msr wrmsr
ffffffffa4068804 native_write_msr wrmsr
ffffffffa4068804 native_write_msr wrmsr
ffffffffa4068806 native_write_msr nopl %eax, (%rax,%rax,1)
ffffffffa4068806 native_write_msr nopl %eax, (%rax,%rax,1)
# perf script -F ip,sym,insn --xed | grep -v "addb %al, (%rax)" | head -5
ffffffffa4068804 native_write_msr wrmsr
ffffffffa4068804 native_write_msr wrmsr
ffffffffa4068804 native_write_msr wrmsr
ffffffffa4068806 native_write_msr nopl %eax, (%rax,%rax,1)
ffffffffa4068806 native_write_msr nopl %eax, (%rax,%rax,1)
#
More examples:
# perf script -F ip,sym,insn --xed | grep -v native_write_msr | head
ffffffffa416b90e tick_check_broadcast_expired btq %rax, 0x1a5f42a(%rip)
ffffffffa4956bd0 nmi_cpu_backtrace pushq %r13
ffffffffa415b95e __hrtimer_next_event_base movq 0x18(%rax), %rdx
ffffffffa4956bf3 nmi_cpu_backtrace popq %r12
ffffffffa4171d5c smp_call_function_single pause
ffffffffa4956bdd nmi_cpu_backtrace mov %ebp, %r12d
ffffffffa4797e4d menu_select cmp $0x190, %rax
ffffffffa4171d5c smp_call_function_single pause
ffffffffa405a7d8 nmi_cpu_backtrace_handler callq 0xffffffffa4956bd0
ffffffffa4797f7a menu_select shr $0x3, %rax
#
Which matches the annotate output modulo resolving callqs:
# perf annotate --stdio2 nmi_cpu_backtrace_handler
Samples: 4 of event 'cycles:ppp', 4000 Hz, Event count (approx.): 35908, [percent: local period]
nmi_cpu_backtrace_handler() /lib/modules/5.0.0+/build/vmlinux
Percent
Disassembly of section .text:
ffffffff8105a7d0 <nmi_cpu_backtrace_handler>:
nmi_cpu_backtrace_handler():
nmi_trigger_cpumask_backtrace(mask, exclude_self,
nmi_raise_cpu_backtrace);
}
static int nmi_cpu_backtrace_handler(unsigned int cmd, struct pt_regs *regs)
{
24.45 → callq __fentry__
if (nmi_cpu_backtrace(regs))
mov %rsi,%rdi
75.55 → callq nmi_cpu_backtrace
return NMI_HANDLED;
movzbl %al,%eax
return NMI_DONE;
}
← retq
#
# perf annotate --stdio2 __hrtimer_next_event_base
Samples: 4 of event 'cycles:ppp', 4000 Hz, Event count (approx.): 767977, [percent: local period]
__hrtimer_next_event_base() /lib/modules/5.0.0+/build/vmlinux
Percent
Disassembly of section .text:
ffffffff8115b910 <__hrtimer_next_event_base>:
__hrtimer_next_event_base():
static ktime_t __hrtimer_next_event_base(struct hrtimer_cpu_base *cpu_base,
const struct hrtimer *exclude,
unsigned int active,
ktime_t expires_next)
{
→ callq __fentry__
<SNIP>
4a: add $0x1,%r14
77.31 mov 0x18(%rax),%rdx
shl $0x6,%r14
sub 0x38(%rbx,%r14,1),%rdx
if (expires < expires_next) {
cmp %r12,%rdx
↓ jge 68
<SNIP>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/20190305144758.12397-3-andi@firstfloor.org
[ Converted fetch_exe() to use the name it ended up having when merged: thread__memcpy() ]
[ archinsn.c needs the instruction decoder that is only build when CONFIG_AUXTRACE=y, fix that ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
||
Jin Yao
|
284c4e18f5 |
perf time-utils: Refactor time range parsing code
Jiri points out that we don't need any time checking and time string
parsing if the --time option is not set. That makes sense.
This patch refactors the time range parsing code, move the duplicated
code from perf report and perf script to time_utils and check if --time
option is set before parsing the time string. This patch is no logic
change expected. So the usage of --time is same as before.
For example:
Select the first and second 10% time slices:
perf report --time 10%/1,10%/2
perf script --time 10%/1,10%/2
Select the slices from 0% to 10% and from 30% to 40%:
perf report --time 0%-10%,30%-40%
perf script --time 0%-10%,30%-40%
Select the time slices from timestamp 3971 to 3973
perf report --time 3971,3973
perf script --time 3971,3973
Committer testing:
Using the above examples, check before and after to see if it remains
the same:
$ perf record -F 10000 -- find . -name "*.[ch]" -exec cat {} + > /dev/null
[ perf record: Woken up 3 times to write data ]
[ perf record: Captured and wrote 1.626 MB perf.data (42392 samples) ]
$
$ perf report --time 10%/1,10%/2 > /tmp/report.before.1
$ perf script --time 10%/1,10%/2 > /tmp/script.before.1
$ perf report --time 0%-10%,30%-40% > /tmp/report.before.2
$ perf script --time 0%-10%,30%-40% > /tmp/script.before.2
$ perf report --time 180457.375844,180457.377717 > /tmp/report.before.3
$ perf script --time 180457.375844,180457.377717 > /tmp/script.before.3
For example, the 3rd test produces this slice:
$ cat /tmp/script.before.3
cat 3147 180457.375844: 2143 cycles:uppp: 7f79362590d9 cfree@GLIBC_2.2.5+0x9 (/usr/lib64/libc-2.28.so)
cat 3147 180457.375986: 2245 cycles:uppp: 558b70f3d86e [unknown] (/usr/bin/cat)
cat 3147 180457.376012: 2164 cycles:uppp: 7f7936257430 _int_malloc+0x8c0 (/usr/lib64/libc-2.28.so)
cat 3147 180457.376140: 2921 cycles:uppp: 558b70f3a554 [unknown] (/usr/bin/cat)
cat 3147 180457.376296: 2844 cycles:uppp: 7f7936258abe malloc+0x4e (/usr/lib64/libc-2.28.so)
cat 3147 180457.376431: 2717 cycles:uppp: 558b70f3b0ca [unknown] (/usr/bin/cat)
cat 3147 180457.376667: 2630 cycles:uppp: 558b70f3d86e [unknown] (/usr/bin/cat)
cat 3147 180457.376795: 2442 cycles:uppp: 7f79362bff55 read+0x15 (/usr/lib64/libc-2.28.so)
cat 3147 180457.376927: 2376 cycles:uppp: ffffffff9aa00163 [unknown] ([unknown])
cat 3147 180457.376954: 2307 cycles:uppp: 7f7936257438 _int_malloc+0x8c8 (/usr/lib64/libc-2.28.so)
cat 3147 180457.377116: 3091 cycles:uppp: 7f7936258a70 malloc+0x0 (/usr/lib64/libc-2.28.so)
cat 3147 180457.377362: 2945 cycles:uppp: 558b70f3a3b0 [unknown] (/usr/bin/cat)
cat 3147 180457.377517: 2727 cycles:uppp: 558b70f3a9aa [unknown] (/usr/bin/cat)
$
Install 'coreutils-debuginfo' to see cat's guts (symbols), but then, the
above chunk translates into this 'perf report' output:
$ cat /tmp/report.before.3
# To display the perf.data header info, please use --header/--header-only options.
#
#
# Total Lost Samples: 0
#
# Samples: 13 of event 'cycles:uppp' (time slices: 180457.375844,180457.377717)
# Event count (approx.): 33552
#
# Overhead Command Shared Object Symbol
# ........ ....... ................ ......................
#
17.69% cat libc-2.28.so [.] malloc
14.53% cat cat [.] 0x000000000000586e
13.33% cat libc-2.28.so [.] _int_malloc
8.78% cat cat [.] 0x00000000000023b0
8.71% cat cat [.] 0x0000000000002554
8.13% cat cat [.] 0x00000000000029aa
8.10% cat cat [.] 0x00000000000030ca
7.28% cat libc-2.28.so [.] read
7.08% cat [unknown] [k] 0xffffffff9aa00163
6.39% cat libc-2.28.so [.] cfree@GLIBC_2.2.5
#
# (Tip: Order by the overhead of source file name and line number: perf report -s srcline)
#
$
Now lets see after applying this patch, nothing should change:
$ perf report --time 10%/1,10%/2 > /tmp/report.after.1
$ perf script --time 10%/1,10%/2 > /tmp/script.after.1
$ perf report --time 0%-10%,30%-40% > /tmp/report.after.2
$ perf script --time 0%-10%,30%-40% > /tmp/script.after.2
$ perf report --time 180457.375844,180457.377717 > /tmp/report.after.3
$ perf script --time 180457.375844,180457.377717 > /tmp/script.after.3
$ diff -u /tmp/report.before.1 /tmp/report.after.1
$ diff -u /tmp/script.before.1 /tmp/script.after.1
$ diff -u /tmp/report.before.2 /tmp/report.after.2
--- /tmp/report.before.2 2019-03-01 11:01:53.526094883 -0300
+++ /tmp/report.after.2 2019-03-01 11:09:18.231770467 -0300
@@ -352,5 +352,5 @@
#
-# (Tip: Generate a script for your data: perf script -g <lang>)
+# (Tip: Treat branches as callchains: perf report --branch-history)
#
$ diff -u /tmp/script.before.2 /tmp/script.after.2
$ diff -u /tmp/report.before.3 /tmp/report.after.3
--- /tmp/report.before.3 2019-03-01 11:03:08.890045588 -0300
+++ /tmp/report.after.3 2019-03-01 11:09:40.660224002 -0300
@@ -22,5 +22,5 @@
#
-# (Tip: Order by the overhead of source file name and line number: perf report -s srcline)
+# (Tip: List events using substring match: perf list <keyword>)
#
$ diff -u /tmp/script.before.3 /tmp/script.after.3
$
Cool, just the 'perf report' tips changed, QED.
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jin Yao <yao.jin@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1551435186-6008-1-git-send-email-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
||
|
Andi Kleen
|
4b6ac811bc |
perf script: Handle missing fields with -F +..
When using -F + syntax to add a field the existing defaults are
currently all marked user_set. This can cause errors when some field is
missing in the perf.data
This patch tracks the actually user set fields separately, so that we don't
error out in this case.
Before:
% perf record true
% perf script -F +metric
Samples for 'cycles:ppp' event do not have CPU attribute set. Cannot print 'cpu' field.
%
After:
5 perf record true
% perf script -F +metric
perf 28936 278636.237688: 1 cycles:ppp: ffffffff8117da99 perf_event_exec+0x59 (/lib/modules/4.20.0-odilo/build/vmlinux)
...
%
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/20190224153722.27020-2-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
||
Jiri Olsa
|
2d4f27999b |
perf data: Add global path holder
Add a 'path' member to 'struct perf_data'. It will keep the configured path for the data (const char *). The path in struct perf_data_file is now dynamically allocated (duped) from it. This scheme is useful/used in following patches where struct perf_data::path holds the 'configure' directory path and struct perf_data_file::path holds the allocated path for specific files. Also it actually makes the code little simpler. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexey Budankov <alexey.budankov@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/20190221094145.9151-3-jolsa@kernel.org [ Fixup data-convert-bt.c missing conversion ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
|
Jiri Olsa
|
6ef362fd3c |
perf script: Allow +- operator for type specific fields option
Add support to add/remove fields for specific event types in -F option.
It's now possible to use '+-' after event type, like:
# cat > test.c
#include <stdio.h>
int main(void)
{
printf("Hello world\n");
while(1) {}
}
^D
# gcc -g -o test test.c
# perf probe -x test 'test.c:5'
# perf record -e '{cpu/cpu-cycles,period=10000/,probe_test:main}:S' ./test
...
# perf script -Ftrace:+period,-cpu
test 3859 396291.117343: 10275 cpu/cpu-cycles,period=10000/: 7f..
test 3859 396291.118234: 11041 cpu/cpu-cycles,period=10000/: ffffff..
test 3859 396291.118234: 1 probe_test:main:
test 3859 396291.118248: 8668 cpu/cpu-cycles,period=10000/: ffffff..
test 3859 396291.118263: 10139 cpu/cpu-cycles,period=10000/: ffffff..
Committer testing:
Couldn't make the test above work, but tested it with:
# perf probe -x hello main
Added new event:
probe_hello:main (on main in /home/acme/c/hello)
You can now use it in all perf tools, such as:
perf record -e probe_hello:main -aR sleep 1
# perf record -e probe_hello:main ./hello
hello, world
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.025 MB perf.data (1 samples) ]
# perf script
hello 21454 [002] 254116.874005: probe_hello:main: (401126)
#
# perf script -Ftrace:+period,-cpu
hello 21454 254116.874005: 1 probe_hello:main: (401126)
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20190220122800.864-4-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
||
Arnaldo Carvalho de Melo
|
1101f69af5 |
pref tools: Add missing map.h includes
Lots of places get the map.h file indirectly, and since we're going to remove it from machine.h, then those need to include it directly, do it now, before we remove that dep. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lkml.kernel.org/n/tip-ob8jehdjda8h5jsrv9dqj9tf@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
Tony Jones
|
8bf8c6da53 |
perf script: Fix crash when processing recorded stat data
While updating perf to work with Python3 and Python2 I noticed that the
stat-cpi script was dumping core.
$ perf stat -e cycles,instructions record -o /tmp/perf.data /bin/false
Performance counter stats for '/bin/false':
802,148 cycles
604,622 instructions 802,148 cycles
604,622 instructions
0.001445842 seconds time elapsed
$ perf script -i /tmp/perf.data -s scripts/python/stat-cpi.py
Segmentation fault (core dumped)
...
...
rblist=rblist@entry=0xb2a200 <rt_stat>,
new_entry=new_entry@entry=0x7ffcb755c310) at util/rblist.c:33
ctx=<optimized out>, type=<optimized out>, create=<optimized out>,
cpu=<optimized out>, evsel=<optimized out>) at util/stat-shadow.c:118
ctx=<optimized out>, type=<optimized out>, st=<optimized out>)
at util/stat-shadow.c:196
count=count@entry=727442, cpu=cpu@entry=0, st=0xb2a200 <rt_stat>)
at util/stat-shadow.c:239
config=config@entry=0xafeb40 <stat_config>,
counter=counter@entry=0x133c6e0) at util/stat.c:372
...
...
The issue is that since
|
||
|
Andi Kleen
|
96167167b6 |
perf script: Fix crash with printing mixed trace point and other events
'perf script' crashes currently when printing mixed trace points and
other events because the trace format does not handle events without
trace meta data. Add a simple check to avoid that.
% cat > test.c
main()
{
printf("Hello world\n");
}
^D
% gcc -g -o test test.c
% sudo perf probe -x test 'test.c:3'
% perf record -e '{cpu/cpu-cycles,period=10000/,probe_test:main}:S' ./test
% perf script
<segfault>
Committer testing:
Before:
# perf probe -x /lib64/libc-2.28.so malloc
Added new event:
probe_libc:malloc (on malloc in /usr/lib64/libc-2.28.so)
You can now use it in all perf tools, such as:
perf record -e probe_libc:malloc -aR sleep 1
# perf probe -l
probe_libc:malloc (on __libc_malloc@malloc/malloc.c in /usr/lib64/libc-2.28.so)
# perf record -e '{cpu/cpu-cycles,period=10000/,probe_libc:*}:S' sleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.023 MB perf.data (40 samples) ]
# perf script
Segmentation fault (core dumped)
^C
#
After:
# perf script | head -6
sleep 2888 94796.944981: 16198 cpu/cpu-cycles,period=10000/: ffffffff925dc04f get_random_u32+0x1f (/lib/modules/5.0.0-rc2+/build/vmlinux)
sleep 2888 [-01] 94796.944981: probe_libc:malloc:
sleep 2888 94796.944983: 4713 cpu/cpu-cycles,period=10000/: ffffffff922763af change_protection+0xcf (/lib/modules/5.0.0-rc2+/build/vmlinux)
sleep 2888 [-01] 94796.944983: probe_libc:malloc:
sleep 2888 94796.944986: 9934 cpu/cpu-cycles,period=10000/: ffffffff922777e0 move_page_tables+0x0 (/lib/modules/5.0.0-rc2+/build/vmlinux)
sleep 2888 [-01] 94796.944986: probe_libc:malloc:
#
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/20190117194834.21940-1-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
||
Adrian Hunter
|
256d92bc93 |
perf thread-stack: Fix thread stack processing for the idle task
perf creates a single 'struct thread' to represent the idle task. That is because threads are identified by PID and TID, and the idle task always has PID == TID == 0. However, there are actually separate idle tasks for each CPU. That creates a problem for thread stack processing which assumes that each thread has a single stack, not one stack per CPU. Fix that by passing through the CPU number, and in the case of the idle "thread", pick the thread stack from an array based on the CPU number. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Link: http://lkml.kernel.org/r/20181221120620.9659-8-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
|
Andi Kleen
|
61f611593f |
perf script: Fix LBR skid dump problems in brstackinsn
This is a fix for another instance of the skid problem Milian recently
found [1]
The LBRs don't freeze at the exact same time as the PMI is triggered.
The perf script brstackinsn code that dumps LBR assembler assumes that
the last branch in the LBR leads to the sample point. But with skid
it's possible that the CPU executes one or more branches before the
sample, but which do not appear in the LBR.
What happens then is either that the sample point is before the last LBR
branch. In this case the dumper sees a negative length and ignores it.
Or it the sample point is long after the last branch. Then the dumper
sees a very long block and dumps it upto its block limit (16k bytes),
which is noise in the output.
On typical sample session this can happen regularly.
This patch tries to detect and handle the situation. On the last block
that is dumped by the LBR dumper we always stop on the first branch. If
the block length is negative just scan forward to the first branch.
Otherwise scan until a branch is found.
The PT decoder already has a function that uses the instruction decoder
to detect branches, so we can just reuse it here.
Then when a terminating branch is found print an indication and stop
dumping. This might miss a few instructions, but at least shows no
runaway blocks.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Milian Wolff <milian.wolff@kdab.com>
Link: http://lkml.kernel.org/r/20181120050617.4119-1-andi@firstfloor.org
[ Resolved conflict with
|
||
|
Andi Kleen
|
dd2e18e9ac |
perf tools: Support 'srccode' output
When looking at PT or brstackinsn traces with 'perf script' it can be
very useful to see the source code. This adds a simple facility to print
them with 'perf script', if the information is available through dwarf
% perf record ...
% perf script -F insn,ip,sym,srccode
...
4004c6 main
5 for (i = 0; i < 10000000; i++)
4004cd main
5 for (i = 0; i < 10000000; i++)
4004c6 main
5 for (i = 0; i < 10000000; i++)
4004cd main
5 for (i = 0; i < 10000000; i++)
4004cd main
5 for (i = 0; i < 10000000; i++)
4004cd main
5 for (i = 0; i < 10000000; i++)
4004cd main
5 for (i = 0; i < 10000000; i++)
4004cd main
5 for (i = 0; i < 10000000; i++)
4004b3 main
6 v++;
% perf record -b ...
% perf script -F insn,ip,sym,srccode,brstackinsn
...
main+22:
0000000000400543 insn: e8 ca ff ff ff # PRED
|18 f1();
f1:
0000000000400512 insn: 55
|10 {
0000000000400513 insn: 48 89 e5
0000000000400516 insn: b8 00 00 00 00
|11 f2();
000000000040051b insn: e8 d6 ff ff ff # PRED
f2:
00000000004004f6 insn: 55
|5 {
00000000004004f7 insn: 48 89 e5
00000000004004fa insn: 8b 05 2c 0b 20 00
|6 c = a / b;
0000000000400500 insn: 8b 0d 2a 0b 20 00
0000000000400506 insn: 99
0000000000400507 insn: f7 f9
0000000000400509 insn: 89 05 29 0b 20 00
000000000040050f insn: 90
|7 }
0000000000400510 insn: 5d
0000000000400511 insn: c3 # PRED
f1+14:
0000000000400520 insn: b8 00 00 00 00
|12 f2();
0000000000400525 insn: e8 cc ff ff ff # PRED
f2:
00000000004004f6 insn: 55
|5 {
00000000004004f7 insn: 48 89 e5
00000000004004fa insn: 8b 05 2c 0b 20 00
|6 c = a / b;
Not supported for callchains currently, would need some layout changes
there.
Committer notes:
Fixed the build on Alpine Linux (3.4 .. 3.8) by addressing this
warning:
In file included from util/srccode.c:19:0:
/usr/include/sys/fcntl.h:1:2: error: #warning redirecting incorrect #include <sys/fcntl.h> to <fcntl.h> [-Werror=cpp]
#warning redirecting incorrect #include <sys/fcntl.h> to <fcntl.h>
^~~~~~~
cc1: all warnings being treated as errors
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Tested-by: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/20181204001848.24769-1-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
||
|
Adrian Hunter
|
692d0e6332 |
perf script: Use fallbacks for branch stacks
Branch stacks do not necessarily have the same cpumode as the 'ip'. Use the fallback functions in those cases. This patch depends on patch "perf tools: Add fallback functions for cases where cpumode is insufficient". Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: David S. Miller <davem@davemloft.net> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Leo Yan <leo.yan@linaro.org> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: stable@vger.kernel.org # 4.19 Link: http://lkml.kernel.org/r/20181106210712.12098-4-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
Milian Wolff
|
9add8fe8e6 |
perf script: Share code and output format for uregs and iregs output
The iregs output was missing the newline at end as well as the leading
ABI output. This made it hard to compare the iregs and uregs values.
Instead, use a single function to output the register values and use it
for both, iregs and uregs, to ensure the output is consistent.
Before:
perf 7049 [-01] 1343.354347: 1 cycles:ppp:
ffffffffa7bc21ce perf_event_exec+0x18e (/lib/modules/4.20.0-rc1perf-devel-05115-gc0bc98f76e39-dirty/build/vmlinux)
ffffffffa7c7ead3 setup_new_exec+0xf3 (/lib/modules/4.20.0-rc1perf-devel-05115-gc0bc98f76e39-dirty/build/vmlinux)
ffffffffa7cd7be5 load_elf_binary+0x395 (/lib/modules/4.20.0-rc1perf-devel-05115-gc0bc98f76e39-dirty/build/vmlinux)
ffffffffa7c7e540 search_binary_handler+0x80 (/lib/modules/4.20.0-rc1perf-devel-05115-gc0bc98f76e39-dirty/build/vmlinux)
ffffffffa7c7f1aa __do_execve_file.isra.13+0x58a (/lib/modules/4.20.0-rc1perf-devel-05115-gc0bc98f76e39-dirty/build/vmlinux)
ffffffffa7c7f561 do_execve+0x21 (/lib/modules/4.20.0-rc1perf-devel-05115-gc0bc98f76e39-dirty/build/vmlinux)
ffffffffa7c7f596 __x64_sys_execve+0x26 (/lib/modules/4.20.0-rc1perf-devel-05115-gc0bc98f76e39-dirty/build/vmlinux)
ffffffffa7a041cb do_syscall_64+0x5b (/lib/modules/4.20.0-rc1perf-devel-05115-gc0bc98f76e39-dirty/build/vmlinux)
ffffffffa840008c entry_SYSCALL_64+0x7c (/lib/modules/4.20.0-rc1perf-devel-05115-gc0bc98f76e39-dirty/build/vmlinux)
AX:0x80000000 BX:0x0 CX:0x0 DX:0x7 SI:0xf DI:0x286 BP:0xffff95bc8213a460 SP:0xffffacbf0ba97d18 IP:0xffffffffa7bc21cd FLAGS:0x28e CS:0x10 SS:0x18 R8:0x2 R9:0x21440 R10:0x33816fb3b8c R11:0x1 R12:0xffff95bc8213a460 R13:0xffff95bc8213a400 R14:0xffff95bc8213a400 R15:0x1 ABI:2 AX:0xffffffffffffffda BX:0xffffffffffffffff CX:0x7f84ad85798b DX:0x560209699d50 SI:0x7ffe2c7a6820 DI:0x7ffe2c7a8c9b BP:0x7ffe2c7a20d0 SP:0x7ffe2c7a2058 IP:0x7f84ad85798b FLAGS:0x206 CS:0x33 SS:0x2b R8:0x7ffe2c7a2030 R9:0x7f84ae55f010 R10:0x8 R11:0x206 R12:0xffffffffffffffff R13:0xffffffffffffffff R14:0xffffffffffffffff R15:0xffffffffffffffff
perf 7049 [-01] 1343.354363: 1 cycles:ppp:
...
After:
perf 7049 [-01] 1343.354347: 1 cycles:ppp:
ffffffffa7bc21ce perf_event_exec+0x18e (/lib/modules/4.20.0-rc1perf-devel-05115-gc0bc98f76e39-dirty/build/vmlinux)
ffffffffa7c7ead3 setup_new_exec+0xf3 (/lib/modules/4.20.0-rc1perf-devel-05115-gc0bc98f76e39-dirty/build/vmlinux)
ffffffffa7cd7be5 load_elf_binary+0x395 (/lib/modules/4.20.0-rc1perf-devel-05115-gc0bc98f76e39-dirty/build/vmlinux)
ffffffffa7c7e540 search_binary_handler+0x80 (/lib/modules/4.20.0-rc1perf-devel-05115-gc0bc98f76e39-dirty/build/vmlinux)
ffffffffa7c7f1aa __do_execve_file.isra.13+0x58a (/lib/modules/4.20.0-rc1perf-devel-05115-gc0bc98f76e39-dirty/build/vmlinux)
ffffffffa7c7f561 do_execve+0x21 (/lib/modules/4.20.0-rc1perf-devel-05115-gc0bc98f76e39-dirty/build/vmlinux)
ffffffffa7c7f596 __x64_sys_execve+0x26 (/lib/modules/4.20.0-rc1perf-devel-05115-gc0bc98f76e39-dirty/build/vmlinux)
ffffffffa7a041cb do_syscall_64+0x5b (/lib/modules/4.20.0-rc1perf-devel-05115-gc0bc98f76e39-dirty/build/vmlinux)
ffffffffa840008c entry_SYSCALL_64+0x7c (/lib/modules/4.20.0-rc1perf-devel-05115-gc0bc98f76e39-dirty/build/vmlinux)
ABI:2 AX:0x80000000 BX:0x0 CX:0x0 DX:0x7 SI:0xf DI:0x286 BP:0xffff95bc8213a460 SP:0xffffacbf0ba97d18 IP:0xffffffffa7bc21cd FLAGS:0x28e CS:0x10 SS:0x18 R8:0x2 R9:0x21440 R10:0x33816fb3b8c R11:0x1 R12:0xffff95bc8213a460 R13:0xffff95bc8213a400 R14:0xffff95bc8213a400 R15:0x1
ABI:2 AX:0xffffffffffffffda BX:0xffffffffffffffff CX:0x7f84ad85798b DX:0x560209699d50 SI:0x7ffe2c7a6820 DI:0x7ffe2c7a8c9b BP:0x7ffe2c7a20d0 SP:0x7ffe2c7a2058 IP:0x7f84ad85798b FLAGS:0x206 CS:0x33 SS:0x2b R8:0x7ffe2c7a2030 R9:0x7f84ae55f010 R10:0x8 R11:0x206 R12:0xffffffffffffffff R13:0xffffffffffffffff R14:0xffffffffffffffff R15:0xffffffffffffffff
perf 7049 [-01] 1343.354363: 1 cycles:ppp:
...
Signed-off-by: Milian Wolff <milian.wolff@kdab.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/20181107223437.9071-1-milian.wolff@kdab.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
||
|
Milian Wolff
|
b07d16f7e9 |
perf script: Add newline after uregs output
This change makes it much easier to easily distinguish between
consecutive samples by keeping the empty line between them, like we see
when we do not enable uregs output.
Before:
cpp-inlining 28298 [-01] 54837.342780: 3068085 cycles:pp:
7ffff7c96709 __hypot_finite+0xa9 (/usr/lib/libm-2.28.so)
...
ABI:2 AX:0x0 BX:0x40f56cf6 CX:0x294a3ae7 ...
cpp-inlining 28298 [-01] 54837.344493: 2881929 cycles:pp:
7ffff7c96696 __hypot_finite+0x36 (/usr/lib/libm-2.28.so)
...
ABI:2 AX:0x40d440c7 BX:0x40d440c7 CX:0x4d45e5da ...
After:
cpp-inlining 28298 [-01] 54837.342780: 3068085 cycles:pp:
7ffff7c96709 __hypot_finite+0xa9 (/usr/lib/libm-2.28.so)
...
ABI:2 AX:0x0 BX:0x40f56cf6 CX:0x294a3ae7 ...
cpp-inlining 28298 [-01] 54837.344493: 2881929 cycles:pp:
7ffff7c96696 __hypot_finite+0x36 (/usr/lib/libm-2.28.so)
...
ABI:2 AX:0x40d440c7 BX:0x40d440c7 CX:0x4d45e5da ...
Signed-off-by: Milian Wolff <milian.wolff@kdab.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/20181107093705.16346-1-milian.wolff@kdab.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
||
|
Andi Kleen
|
fe57120e18 |
perf script: Support total cycles count
For 'perf script' brstackinsn also print a running cycles count. This
makes it easier to calculate cycle deltas for code sections measured
with LBRs.
% perf record -b -a sleep 1
% perf script -F +brstackinsn
...
00007f73ecc41083 insn: 74 06 # PRED 9 cycles [17] 1.11 IPC
00007f73ecc4108b insn: a8 10
00007f73ecc4108d insn: 74 71 # PRED 1 cycles [18] 1.00 IPC
00007f73ecc41100 insn: 48 8b 46 10
00007f73ecc41104 insn: 4c 8b 38
00007f73ecc41107 insn: 4d 85 ff
00007f73ecc4110a insn: 0f 84 b0 00 00 00
00007f73ecc41110 insn: 83 43 58 01
00007f73ecc41114 insn: 48 89 df
00007f73ecc41117 insn: e8 94 73 04 00 # PRED 6 cycles [24] 1.00 IPC
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Link: http://lkml.kernel.org/r/20180924170732.GA28040@tassilo.jf.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
||
|
Andi Kleen
|
99f753f048 |
perf script: Implement --graph-function
Add a ftrace style --graph-function argument to 'perf script' that
allows to print itrace function calls only below a given function. This
makes it easier to find the code of interest in a large trace.
% perf record -e intel_pt//k -a sleep 1
% perf script --graph-function group_sched_in --call-trace
perf 900 [000] 194167.205652203: ([kernel.kallsyms]) group_sched_in
perf 900 [000] 194167.205652203: ([kernel.kallsyms]) __x86_indirect_thunk_rax
perf 900 [000] 194167.205652203: ([kernel.kallsyms]) event_sched_in.isra.107
perf 900 [000] 194167.205652203: ([kernel.kallsyms]) perf_event_set_state.part.71
perf 900 [000] 194167.205652203: ([kernel.kallsyms]) perf_event_update_time
perf 900 [000] 194167.205652203: ([kernel.kallsyms]) perf_pmu_disable
perf 900 [000] 194167.205652203: ([kernel.kallsyms]) perf_log_itrace_start
perf 900 [000] 194167.205652203: ([kernel.kallsyms]) __x86_indirect_thunk_rax
perf 900 [000] 194167.205652203: ([kernel.kallsyms]) perf_event_update_userpage
perf 900 [000] 194167.205652203: ([kernel.kallsyms]) calc_timer_values
perf 900 [000] 194167.205652203: ([kernel.kallsyms]) sched_clock_cpu
perf 900 [000] 194167.205652203: ([kernel.kallsyms]) __x86_indirect_thunk_rax
perf 900 [000] 194167.205652203: ([kernel.kallsyms]) arch_perf_update_userpage
perf 900 [000] 194167.205652203: ([kernel.kallsyms]) __fentry__
perf 900 [000] 194167.205652203: ([kernel.kallsyms]) using_native_sched_clock
perf 900 [000] 194167.205652203: ([kernel.kallsyms]) sched_clock_stable
perf 900 [000] 194167.205652203: ([kernel.kallsyms]) perf_pmu_enable
perf 900 [000] 194167.205652203: ([kernel.kallsyms]) __x86_indirect_thunk_rax
swapper 0 [001] 194167.205660693: ([kernel.kallsyms]) group_sched_in
swapper 0 [001] 194167.205660693: ([kernel.kallsyms]) __x86_indirect_thunk_rax
swapper 0 [001] 194167.205660693: ([kernel.kallsyms]) event_sched_in.isra.107
swapper 0 [001] 194167.205660693: ([kernel.kallsyms]) perf_event_set_state.part.71
swapper 0 [001] 194167.205660693: ([kernel.kallsyms]) perf_event_update_time
swapper 0 [001] 194167.205660693: ([kernel.kallsyms]) perf_pmu_disable
swapper 0 [001] 194167.205660693: ([kernel.kallsyms]) perf_log_itrace_start
swapper 0 [001] 194167.205660693: ([kernel.kallsyms]) __x86_indirect_thunk_rax
swapper 0 [001] 194167.205660693: ([kernel.kallsyms]) perf_event_update_userpage
swapper 0 [001] 194167.205660693: ([kernel.kallsyms]) calc_timer_values
swapper 0 [001] 194167.205660693: ([kernel.kallsyms]) sched_clock_cpu
swapper 0 [001] 194167.205660693: ([kernel.kallsyms]) __x86_indirect_thunk_rax
swapper 0 [001] 194167.205660693: ([kernel.kallsyms]) arch_perf_update_userpage
swapper 0 [001] 194167.205660693: ([kernel.kallsyms]) __fentry__
swapper 0 [001] 194167.205660693: ([kernel.kallsyms]) using_native_sched_clock
swapper 0 [001] 194167.205660693: ([kernel.kallsyms]) sched_clock_stable
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Leo Yan <leo.yan@linaro.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Kim Phillips <kim.phillips@arm.com>
Link: http://lkml.kernel.org/r/20180920180540.14039-5-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
||
|
Andi Kleen
|
d1b1552e15 |
tools script: Add --call-trace and --call-ret-trace
Add short cut options to print PT call trace and call-ret-trace, for
calls and call and returns. Roughly corresponds to ftrace function
tracer and function graph tracer.
Just makes these common use cases nicer to use.
% perf record -a -e intel_pt// sleep 1
% perf script --call-trace
perf 900 [000] 194167.205652203: ([kernel.kallsyms]) perf_pmu_enable
perf 900 [000] 194167.205652203: ([kernel.kallsyms]) __x86_indirect_thunk_rax
perf 900 [000] 194167.205652203: ([kernel.kallsyms]) event_filter_match
perf 900 [000] 194167.205652203: ([kernel.kallsyms]) group_sched_in
perf 900 [000] 194167.205652203: ([kernel.kallsyms]) __x86_indirect_thunk_rax
perf 900 [000] 194167.205652203: ([kernel.kallsyms]) event_sched_in.isra.107
perf 900 [000] 194167.205652203: ([kernel.kallsyms]) perf_event_set_state.part.71
perf 900 [000] 194167.205652203: ([kernel.kallsyms]) perf_event_update_time
perf 900 [000] 194167.205652203: ([kernel.kallsyms]) perf_pmu_disable
perf 900 [000] 194167.205652203: ([kernel.kallsyms]) perf_log_itrace_start
perf 900 [000] 194167.205652203: ([kernel.kallsyms]) __x86_indirect_thunk_rax
perf 900 [000] 194167.205652203: ([kernel.kallsyms]) perf_event_update_userpage
% perf script --call-ret-trace
perf 900 [000] 194167.205652203: tr strt ([unknown]) pt_config
perf 900 [000] 194167.205652203: return ([kernel.kallsyms]) pt_config
perf 900 [000] 194167.205652203: return ([kernel.kallsyms]) pt_event_add
perf 900 [000] 194167.205652203: call ([kernel.kallsyms]) perf_pmu_enable
perf 900 [000] 194167.205652203: return ([kernel.kallsyms]) perf_pmu_nop_void
perf 900 [000] 194167.205652203: return ([kernel.kallsyms]) event_sched_in.isra.107
perf 900 [000] 194167.205652203: call ([kernel.kallsyms]) __x86_indirect_thunk_rax
perf 900 [000] 194167.205652203: return ([kernel.kallsyms]) perf_pmu_nop_int
perf 900 [000] 194167.205652203: return ([kernel.kallsyms]) group_sched_in
perf 900 [000] 194167.205652203: call ([kernel.kallsyms]) event_filter_match
perf 900 [000] 194167.205652203: return ([kernel.kallsyms]) event_filter_match
perf 900 [000] 194167.205652203: call ([kernel.kallsyms]) group_sched_in
perf 900 [000] 194167.205652203: call ([kernel.kallsyms]) __x86_indirect_thunk_rax
perf 900 [000] 194167.205652203: return ([kernel.kallsyms]) perf_pmu_nop_txn
perf 900 [000] 194167.205652203: call ([kernel.kallsyms]) event_sched_in.isra.107
perf 900 [000] 194167.205652203: call ([kernel.kallsyms]) perf_event_set_state.part.71
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Leo Yan <leo.yan@linaro.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Kim Phillips <kim.phillips@arm.com>
Link: http://lkml.kernel.org/r/20180920180540.14039-4-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
||
|
Andi Kleen
|
4eb0681571 |
perf script: Make itrace script default to all calls
By default 'perf script' for itrace outputs sampled instructions or branches. In my experience this is confusing to users because it's hard to correlate with real program behavior. The sampling makes sense for tools like 'perf report' that actually sample to reduce the run time, but run time is normally not a problem for 'perf script'. It's better to give an accurate representation of the program flow. Default 'perf script' to output all calls for itrace. That's a much saner default. The old behavior can be still requested with 'perf script' --itrace=ibxwpe100000 v2: Fix ETM build failure v3: Really fix ETM build failure (Kim Phillips) Signed-off-by: Andi Kleen <ak@linux.intel.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Kim Phillips <kim.phillips@arm.com> Cc: Leo Yan <leo.yan@linaro.org> Link: http://lkml.kernel.org/r/20180920180540.14039-3-andi@firstfloor.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
|
Andi Kleen
|
b585ebdb59 |
perf script: Add --insn-trace for instruction decoding
Add a --insn-trace short hand option for decoding and disassembling instruction streams for intel_pt. This automatically pipes the output into the xed disassembler to generate disassembled instructions. This just makes this use model much nicer to use. Before % perf record -e intel_pt// ... % perf script --itrace=i0ns --ns -F +insn,-event,-period | xed -F insn: -A -64 swapper 0 [000] 17276.429606186: ffffffff81010486 pt_config ([kernel.kallsyms]) nopl %eax, (%rax,%rax,1) swapper 0 [000] 17276.429606186: ffffffff8101048b pt_config ([kernel.kallsyms]) add $0x10, %rsp swapper 0 [000] 17276.429606186: ffffffff8101048f pt_config ([kernel.kallsyms]) popq %rbx swapper 0 [000] 17276.429606186: ffffffff81010490 pt_config ([kernel.kallsyms]) popq %rbp swapper 0 [000] 17276.429606186: ffffffff81010491 pt_config ([kernel.kallsyms]) popq %r12 swapper 0 [000] 17276.429606186: ffffffff81010493 pt_config ([kernel.kallsyms]) popq %r13 swapper 0 [000] 17276.429606186: ffffffff81010495 pt_config ([kernel.kallsyms]) popq %r14 swapper 0 [000] 17276.429606186: ffffffff81010497 pt_config ([kernel.kallsyms]) popq %r15 swapper 0 [000] 17276.429606186: ffffffff81010499 pt_config ([kernel.kallsyms]) retq swapper 0 [000] 17276.429606186: ffffffff8101063e pt_event_add ([kernel.kallsyms]) cmpl $0x1, 0x1b0(%rbx) swapper 0 [000] 17276.429606186: ffffffff81010645 pt_event_add ([kernel.kallsyms]) mov $0xffffffea, %eax swapper 0 [000] 17276.429606186: ffffffff8101064a pt_event_add ([kernel.kallsyms]) mov $0x0, %edx swapper 0 [000] 17276.429606186: ffffffff8101064f pt_event_add ([kernel.kallsyms]) popq %rbx swapper 0 [000] 17276.429606186: ffffffff81010650 pt_event_add ([kernel.kallsyms]) cmovnz %edx, %eax swapper 0 [000] 17276.429606186: ffffffff81010653 pt_event_add ([kernel.kallsyms]) jmp 0xffffffff81010635 swapper 0 [000] 17276.429606186: ffffffff81010635 pt_event_add ([kernel.kallsyms]) retq swapper 0 [000] 17276.429606186: ffffffff8115e687 event_sched_in.isra.107 ([kernel.kallsyms]) test %eax, %eax Now: % perf record -e intel_pt// ... % perf script --insn-trace --xed ... same output ... XED needs to be installed with: $ git clone https://github.com/intelxed/mbuild.git mbuild $ git clone https://github.com/intelxed/xed $ cd xed $ ./mfile.py $ ./mfile.py examples $ sudo ./mfile.py --prefix=/usr/local install $ sudo cp obj/examples/xed /usr/local/bin $ xed | head -3 ERROR: required argument(s) were missing Copyright (C) 2017, Intel Corporation. All rights reserved. XED version: [v10.0-328-g7d62c8c49b7b] $ Signed-off-by: Andi Kleen <ak@linux.intel.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Link: http://lkml.kernel.org/r/20180920180540.14039-2-andi@firstfloor.org [ Fixed up whitespace damage, added the 'mfile.py examples + cp obj/examples/xed ... ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
|
Milian Wolff
|
7ee40678af |
perf script: Flush output stream after events in verbose mode
When the perf script output is written to a terminal stream, the normal
output of `perf script` would get buffered, but its debug output would
be written directly. This made it quite hard to figure out where a given
debug output is coming from.
We can improve on this by flushing the output buffer after processing an
event. To see the value, compare the following output for a `perf script
-v` run:
Before this patch:
```
unwind: reg 16, val 7faf7dfdc000
unwind: reg 7, val 7ffc80811e30
unwind: find_proc_info dso /usr/lib/ld-2.28.so
unwind: reg 6, val 0
unwind: _start:ip = 0x7faf7dfdc000 (0x2000)
unwind: reg 16, val 7faf7dfdc000
unwind: reg 7, val 7ffc80811e30
unwind: find_proc_info dso /usr/lib/ld-2.28.so
unwind: reg 6, val 0
unwind: _start:ip = 0x7faf7dfdc000 (0x2000)
unwind: reg 16, val 7faf7dfdc000
unwind: reg 7, val 7ffc80811e30
unwind: find_proc_info dso /usr/lib/ld-2.28.so
unwind: reg 6, val 0
unwind: _start:ip = 0x7faf7dfdc000 (0x2000)
unwind: reg 16, val 7faf7dfdc000
unwind: reg 7, val 7ffc80811e30
... lots and lots of verbose debug output
cpp-inlining 24617 90229.122036534: 1 cycles:uppp:
7faf7dfdc000 _start+0x0 (/usr/lib/ld-2.28.so)
cpp-inlining 24617 90229.122043974: 1 cycles:uppp:
7faf7dfdc000 _start+0x0 (/usr/lib/ld-2.28.so)
...
```
After this patch:
```
...
unwind: reg 16, val 7faf7dfdc000
unwind: reg 7, val 7ffc80811e30
unwind: find_proc_info dso /usr/lib/ld-2.28.so
unwind: reg 6, val 0
unwind: _start:ip = 0x7faf7dfdc000 (0x2000)
cpp-inlining 24617 90229.122036534: 1 cycles:uppp:
7faf7dfdc000 _start+0x0 (/usr/lib/ld-2.28.so)
unwind: reg 16, val 7faf7dfdc000
unwind: reg 7, val 7ffc80811e30
unwind: find_proc_info dso /usr/lib/ld-2.28.so
unwind: reg 6, val 0
unwind: _start:ip = 0x7faf7dfdc000 (0x2000)
cpp-inlining 24617 90229.122043974: 1 cycles:uppp:
7faf7dfdc000 _start+0x0 (/usr/lib/ld-2.28.so)
...
```
This new output format makes it much easier to use perf script output
for debugging purposes, e.g. to investigate broken dwarf unwinding.
Signed-off-by: Milian Wolff <milian.wolff@kdab.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/20181021191424.16183-2-milian.wolff@kdab.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
||
|
Milian Wolff
|
c1c9b9695c |
perf script: Allow extended console debug output
The script tool isn't using a browser, yet use_browser wasn't set explicitly to zero. This in turn lead to confusing output such as: ``` $ perf script -vvv ... ... overlapping maps in /home/milian/foobar (disable tui for more info) ... ``` Explicitly set use_browser to 0 now, which gives us the extended debug information now in perf script as expected. Signed-off-by: Milian Wolff <milian.wolff@kdab.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Link: http://lkml.kernel.org/r/20181021191424.16183-1-milian.wolff@kdab.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
|
Adrian Hunter
|
62cb1b8868 |
perf script: Enhance sample flags for trace begin / end
Allow for different combinations of sample flags with "trace begin" or "trace end". Previously, the Intel PT decoder would indicate begin / end by a branch from / to zero. That hides useful information, in particular when a trace ends with a call. Before remedying that, prepare 'perf script' to display sample flags with more combinations that include trace begin / end. In those cases display 'tr start' and 'tr end' separately. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Link: http://lkml.kernel.org/r/20180920130048.31432-2-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
|
Andi Kleen
|
a78cdee6fb |
perf script: Print DSO for callindent
Now that we don't need to print the IP/ADDR for callindent the DSO is
also not printed. It's useful for some cases, so add an own DSO printout
for callindent for the case when IP/ADDR is not enabled.
Before:
% perf script --itrace=cr -F +callindent,-ip,-sym,-symoff,-addr
swapper 0 [000] 3377.917072: 1 branches: pt_config
swapper 0 [000] 3377.917072: 1 branches: pt_config
swapper 0 [000] 3377.917072: 1 branches: pt_event_add
swapper 0 [000] 3377.917072: 1 branches: perf_pmu_enable
swapper 0 [000] 3377.917072: 1 branches: perf_pmu_nop_void
swapper 0 [000] 3377.917072: 1 branches: event_sched_in.isra.107
swapper 0 [000] 3377.917072: 1 branches: __x86_indirect_thunk_rax
swapper 0 [000] 3377.917072: 1 branches: perf_pmu_nop_int
swapper 0 [000] 3377.917072: 1 branches: group_sched_in
swapper 0 [000] 3377.917072: 1 branches: event_filter_match
swapper 0 [000] 3377.917072: 1 branches: event_filter_match
swapper 0 [000] 3377.917072: 1 branches: group_sched_in
After:
swapper 0 [000] 3377.917072: 1 branches: ([unknown]) pt_config
swapper 0 [000] 3377.917072: 1 branches: ([kernel.kallsyms]) pt_config
swapper 0 [000] 3377.917072: 1 branches: ([kernel.kallsyms]) pt_event_add
swapper 0 [000] 3377.917072: 1 branches: ([kernel.kallsyms]) perf_pmu_enable
swapper 0 [000] 3377.917072: 1 branches: ([kernel.kallsyms]) perf_pmu_nop_void
swapper 0 [000] 3377.917072: 1 branches: ([kernel.kallsyms]) event_sched_in.isra.107
swapper 0 [000] 3377.917072: 1 branches: ([kernel.kallsyms]) __x86_indirect_thunk_rax
swapper 0 [000] 3377.917072: 1 branches: ([kernel.kallsyms]) perf_pmu_nop_int
swapper 0 [000] 3377.917072: 1 branches: ([kernel.kallsyms]) group_sched_in
swapper 0 [000] 3377.917072: 1 branches: ([kernel.kallsyms]) event_filter_match
swapper 0 [000] 3377.917072: 1 branches: ([kernel.kallsyms]) event_filter_match
swapper 0 [000] 3377.917072: 1 branches: ([kernel.kallsyms]) group_sched_in
swapper 0 [000] 3377.917072: 1 branches: ([kernel.kallsyms]) __x86_indirect_thunk_rax
swapper 0 [000] 3377.917072: 1 branches: ([kernel.kallsyms]) perf_pmu_nop_txn
swapper 0 [000] 3377.917072: 1 branches: ([kernel.kallsyms]) event_sched_in.isra.107
(in the kernel case of course it's not very useful, but it's important
with user programs where symbols are not unique)
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kim Phillips <kim.phillips@arm.com>
Link: http://lkml.kernel.org/r/20180918123214.26728-6-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
||
|
Andi Kleen
|
37fed3de55 |
perf script: Allow sym and dso without ip, addr
Currently sym and dso require printing ip and addr because the print
function is tied to those outputs. With callindent it makes sense to
print the symbol or dso without numerical IP or ADDR. So change the
dependency check to only check the underlying attribute.
Also the branch target output relies on the user_set flag to determine
if the branch target should be implicitely printed. When modifying the
fields with + or - also set user_set, so that ADDR can be removed. We
also need to set wildcard_set to make the initial sanity check pass.
This allows to remove a lot of noise in callindent output by dropping
the numerical addresses, which are not all that useful.
Before
% perf script --itrace=cr -F +callindent
swapper 0 [000] 156546.354971: 1 branches: pt_config 0 [unknown] ([unknown]) => ffffffff81010486 pt_config ([kernel.kallsyms])
swapper 0 [000] 156546.354971: 1 branches: pt_config ffffffff81010499 pt_config ([kernel.kallsyms]) => ffffffff8101063e pt_event_add ([kernel.kallsyms])
swapper 0 [000] 156546.354971: 1 branches: pt_event_add ffffffff81010635 pt_event_add ([kernel.kallsyms]) => ffffffff8115e687 event_sched_in.isra.107 ([kernel.kallsyms])
swapper 0 [000] 156546.354971: 1 branches: perf_pmu_enable ffffffff8115e726 event_sched_in.isra.107 ([kernel.kallsyms]) => ffffffff811579b0 perf_pmu_enable ([kernel.kallsyms])
swapper 0 [000] 156546.354971: 1 branches: perf_pmu_nop_void ffffffff81151730 perf_pmu_nop_void ([kernel.kallsyms]) => ffffffff8115e72b event_sched_in.isra.107 ([kernel.kallsyms])
swapper 0 [000] 156546.354971: 1 branches: event_sched_in.isra.107 ffffffff8115e737 event_sched_in.isra.107 ([kernel.kallsyms]) => ffffffff8115e7a5 group_sched_in ([kernel.kallsyms])
swapper 0 [000] 156546.354971: 1 branches: __x86_indirect_thunk_rax ffffffff8115e7f6 group_sched_in ([kernel.kallsyms]) => ffffffff81a03000 __x86_indirect_thunk_rax ([kernel.kallsyms])
After
% perf script --itrace=cr -F +callindent,-ip,-sym,-symoff
swapper 0 [000] 156546.354971: 1 branches: pt_config
swapper 0 [000] 156546.354971: 1 branches: pt_config
swapper 0 [000] 156546.354971: 1 branches: pt_event_add
swapper 0 [000] 156546.354971: 1 branches: perf_pmu_enable
swapper 0 [000] 156546.354971: 1 branches: perf_pmu_nop_void
swapper 0 [000] 156546.354971: 1 branches: event_sched_in.isra.107
swapper 0 [000] 156546.354971: 1 branches: __x86_indirect_thunk_rax
swapper 0 [000] 156546.354971: 1 branches: perf_pmu_nop_int
swapper 0 [000] 156546.354971: 1 branches: group_sched_in
swapper 0 [000] 156546.354971: 1 branches: event_filter_match
swapper 0 [000] 156546.354971: 1 branches: event_filter_match
swapper 0 [000] 156546.354971: 1 branches: group_sched_in
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kim Phillips <kim.phillips@arm.com>
Link: http://lkml.kernel.org/r/20180918123214.26728-5-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
||
|
Andi Kleen
|
c12e039d12 |
perf tools: Report itrace options in help
I often forget all the options that --itrace accepts. Instead of burying them in the man page only report them in the normal command line help too to make them easier accessible. v2: Align Signed-off-by: Andi Kleen <ak@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kim Phillips <kim.phillips@arm.com> Link: http://lkml.kernel.org/r/20180914031038.4160-2-andi@firstfloor.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
|
Jiri Olsa
|
89f1688a57 |
perf tools: Remove perf_tool from event_op2
Now that we keep a perf_tool pointer inside perf_session, there's no need to have a perf_tool argument in the event_op2 callback. Remove it. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexey Budankov <alexey.budankov@linux.intel.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20180913125450.21342-2-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
|
Jiri Olsa
|
6ca9a082b1 |
perf stat: Pass a 'struct perf_stat_config' argument to global print functions
Add 'struct perf_stat_config' argument to the global print functions, so that these functions can be used out of the 'perf stat' command code. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20180830063252.23729-20-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
Tzvetomir Stoyanov (VMware)
|
ece2a4f483 |
tools lib traceevent, perf tools: Rename pevent_set_* APIs
In order to make libtraceevent into a proper library, variables, data structures and functions require a unique prefix to prevent name space conflicts. That prefix will be "tep_" and not "pevent_". This changes APIs: pevent_set_file_bigendian, pevent_set_flag, pevent_set_function_resolver, pevent_set_host_bigendian, pevent_set_long_size, pevent_set_page_size and pevent_get_long_size Signed-off-by: Tzvetomir Stoyanov (VMware) <tz.stoyanov@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Yordan Karadzhov (VMware) <y.karadz@gmail.com> Cc: linux-trace-devel@vger.kernel.org Link: http://lkml.kernel.org/r/20180808180701.256265951@goodmis.org Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
Ravi Bangoria
|
92ead7ee30 |
perf tools: Fix crash caused by accessing feat_ops[HEADER_LAST_FEATURE]
perf_event__process_feature() accesses feat_ops[HEADER_LAST_FEATURE]
which is not defined and thus perf is crashing. HEADER_LAST_FEATURE is
used as an end marker for the perf report but it's unused for perf
script/annotate. Ignore HEADER_LAST_FEATURE for perf script/annotate,
just like it is done in 'perf report'.
Before:
# perf record -o - ls | perf script
<SNIP 'ls' output>
Segmentation fault (core dumped)
#
After:
# perf record -o - ls | perf script
<SNIP 'ls' output>
Segmentation fault (core dumped)
ls 7031 4392.099856: 250000 cpu-clock:uhH: 7f5e0ce7cd60
ls 7031 4392.100355: 250000 cpu-clock:uhH: 7f5e0c706ef7
#
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: David Carrillo-Cisneros <davidcc@google.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Fixes:
|
||
|
Ravi Bangoria
|
a3af66f51b |
perf script: Fix crash because of missing evsel->priv
'perf script' in piped mode is crashing because evsel->priv is not set
properly. Fix it.
Before:
# perf record -o - -- ls | perf script
<SNIP 'ls' output>
Segmentation fault (core dumped)
#
After:
# perf record -o - -- ls | perf script
<SNIP 'ls' output>
ls 2282 1031.731974: 250000 cpu-clock:uhH: 7effe4b3d29e
ls 2282 1031.732222: 250000 cpu-clock:uhH: 7effe4b3a650
#
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: David Carrillo-Cisneros <davidcc@google.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Fixes:
|
||
|
Ravi Bangoria
|
10e9cec905 |
perf script: Add missing output fields in a hint
A few fields are missing in a perf script -F hint. Add them. Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: David Carrillo-Cisneros <davidcc@google.com> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: http://lkml.kernel.org/r/20180625124220.6434-2-ravi.bangoria@linux.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
Seeteena Thoufeek
|
fad76d4333 |
perf script: Show hw-cache events
'perf script' fails to report hardware cache events (PERF_TYPE_HW_CACHE)
where as 'perf report' shows the samples. Fix it. Ex,
# perf record -e L1-dcache-loads ./a.out
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.008 MB perf.data (11 samples)]
Before patch:
# perf script | wc -l
0
After patch:
# perf script | wc -l
11
Committer testing:
[root@jouet ~]# perf script | head -30 | tail
Timer 9803 [2] 8.963330: 1554 L1-dcache-loads: 7ffef89baae4 __vdso_clock_gettime+0xf4 ([vdso])
swapper 0 [2] 8.963343: 5626 L1-dcache-loads: ffffffffa66f4f6b cpuidle_not_av+0xb (/lib/modules/4.17.0-rc5/build/vmlinux)
firefox 4853 [2] 8.964070: 18935 L1-dcache-loads: 7f0b9a00dc30 xcb_poll_for_event+0x0 (/usr/lib64/libxcb.so.1.1.0)
Softwar~cTh 4928 [2] 8.964548: 15928 L1-dcache-loads: ffffffffa60d795c update_curr+0x10c (/lib/modules/4.17.0-rc5/build/vmlinux)
firefox 4853 [2] 8.964675: 14978 L1-dcache-loads: ffffffffa6897018 mutex_unlock+0x18 (/lib/modules/4.17.0-rc5/build/vmlinux)
gnome-shell 2026 [3] 8.964693: 50670 L1-dcache-loads: 7fa08854de6d g_source_iter_next+0x6d (/usr/lib64/libglib-2.0.so.0.5400.3)
Compositor 4929 [1] 8.964784: 71772 L1-dcache-loads: 7f0b936bf078 [unknown] (/usr/lib64/firefox/libxul.so)
Xwayland 2096 [2] 8.964919: 16799 L1-dcache-loads: 7f68ce2fcb8a glXGetCurrentContext+0x1a (/usr/lib64/libGLX.so.0.0.0)
gnome-shell 2026 [3] 8.964997: 50670 L1-dcache-loads: 7fa08854de6d g_source_iter_next+0x6d (/usr/lib64/libglib-2.0.so.0.5400.3)
[root@jouet ~]#
Signed-off-by: Seeteena Thoufeek <s1seetee@linux.vnet.ibm.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1528455748-20087-1-git-send-email-s1seetee@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
||
|
Arnaldo Carvalho de Melo
|
b879833cba |
perf script: Check if evsel has callchains before trying to use it
We were checking just if callchain processing was asked for by the user, not if the evsel itself has callchains, and since we can have some evsels with callchains and others without, check that. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-inxl7k49q9f9w1se039fbxuw@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
|
Arnaldo Carvalho de Melo
|
27de9b2bd9 |
perf evsel: Add has_callchain() helper to make code more compact/clear
Its common to have the (evsel->attr.sample_type & PERF_SAMPLE_CALLCHAIN), so add an evsel__has_callchain(evsel) helper. This will actually get more uses as we check that instead of symbol_conf.use_callchain in places where that produces the same result but makes this decision to be more fine grained, per evsel. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-145340oytbthatpfeaq1do18@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
Sandipan Das
|
7903a70867 |
perf script: Show symbol offsets by default
Since the ip shown for a symbol is now always a virtual address, it
becomes difficult to correlate this with objdump output and determine
the exact instruction address. So, we always show the offset from the
start of the symbol.
This can be verified on a powerpc64le system running Fedora 27 as
follows:
# perf probe -a sys_write
# perf record -e probe:sys_write -g ~/test
Before applying this patch:
# perf script
test 9710 [013] 95614.332431: probe:sys_write: (c0000000004025b0)
c0000000004025b0 sys_write (/lib/modules/4.17.0-rc4+/build/vmlinux)
c00000000000b9e0 system_call (/lib/modules/4.17.0-rc4+/build/vmlinux)
7fffb70d8234 __GI___libc_write (/usr/lib64/libc-2.26.so)
7fffb7052c74 _IO_file_write@@GLIBC_2.17 (/usr/lib64/libc-2.26.so)
5afc1818 [unknown] ([unknown])
7fffb7051a60 new_do_write (/usr/lib64/libc-2.26.so)
7fffb7054638 _IO_do_write@@GLIBC_2.17 (/usr/lib64/libc-2.26.so)
7fffb7054bbc _IO_file_overflow@@GLIBC_2.17 (/usr/lib64/libc-2.26.so)
7fffb7055a24 __overflow (/usr/lib64/libc-2.26.so)
7fffb7044548 _IO_puts (/usr/lib64/libc-2.26.so)
10000440 main (/home/sandipan/test)
7fffb6fe36a0 generic_start_main.isra.0 (/usr/lib64/libc-2.26.so)
7fffb6fe3898 __libc_start_main (/usr/lib64/libc-2.26.so)
0 [unknown] ([unknown])
...
After applying this patch:
# perf script
test 9710 [013] 95614.332431: probe:sys_write: (c0000000004025b0)
c0000000004025b0 sys_write+0x10 (/lib/modules/4.17.0-rc4+/build/vmlinux)
c00000000000b9e0 system_call+0x58 (/lib/modules/4.17.0-rc4+/build/vmlinux)
7fffb70d8234 __GI___libc_write+0x24 (/usr/lib64/libc-2.26.so)
7fffb7052c74 _IO_file_write@@GLIBC_2.17+0x44 (/usr/lib64/libc-2.26.so)
5afc1818 [unknown] ([unknown])
7fffb7051a60 new_do_write+0x90 (/usr/lib64/libc-2.26.so)
7fffb7054638 _IO_do_write@@GLIBC_2.17+0x38 (/usr/lib64/libc-2.26.so)
7fffb7054bbc _IO_file_overflow@@GLIBC_2.17+0x14c (/usr/lib64/libc-2.26.so)
7fffb7055a24 __overflow+0x64 (/usr/lib64/libc-2.26.so)
7fffb7044548 _IO_puts+0x218 (/usr/lib64/libc-2.26.so)
10000440 main+0x20 (/home/sandipan/test)
7fffb6fe36a0 generic_start_main.isra.0+0x140 (/usr/lib64/libc-2.26.so)
7fffb6fe3898 __libc_start_main+0xb8 (/usr/lib64/libc-2.26.so)
0 [unknown] ([unknown])
...
Signed-off-by: Sandipan Das <sandipan@linux.vnet.ibm.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Link: http://lkml.kernel.org/r/20180517063326.6319-2-sandipan@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
||
|
Arnaldo Carvalho de Melo
|
404eb5a436 |
perf thread: Make thread__find_map() search all maps
We still have the split internally, but users don't see it anymore, simplifying the growing number of cases where we end up searching in the MAP__VARIABLE maps. This further paves the way for ditching the split. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-86mfxrztf310konutxvhr5ua@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
|
Arnaldo Carvalho de Melo
|
71a84b5aed |
perf thread: Make thread__find_map() return the map
It was returning the searched map just on the addr_location passed, with the function itself returning void. Make it return the map so that we can make the code more compact. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-tzlrrzdeoof4i6ktyqv1t6ks@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
|
Arnaldo Carvalho de Melo
|
cc5f02f2be |
perf script: Use thread__find_symbol() instead of ad-hoc equivalent
In
|
||
|
Arnaldo Carvalho de Melo
|
f07a2d32b5 |
perf thread: Introduce thread__find_map()
Out of thread__find_add_map(..., MAP__FUNCTION, ...), idea here is to
continue removing references to MAP__{FUNCTION,VARIABLE} ahead of
getting both types of symbols in the same rbtree, as various places do
two lookups, looking first at MAP__FUNCTION, then at MAP__VARIABLE.
So thread__find_map() will eventually do just that, and 'struct symbol'
will have the symbol type, for code that cares about that.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-q27xee34l4izpfau49w103s6@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
||
Alexey Budankov
|
bf30cc1882 |
perf script: Extend misc field decoding with switch out event type
Append 'p' sign to 'S' tag designating the type of context switch out event so
'Sp' means preemption context switch. Documentation is extended to cover
new presentation changes.
$ perf script --show-switch-events -F +misc -I -i perf.data:
hdparm 4073 [004] U 762.198265: 380194 cycles:ppp: 7faf727f5a23 strchr (/usr/lib64/ld-2.26.so)
hdparm 4073 [004] K 762.198366: 441572 cycles:ppp: ffffffffb9218435 alloc_set_pte (/lib/modules/4.16.0-rc6+/build/vmlinux)
hdparm 4073 [004] S 762.198391: PERF_RECORD_SWITCH_CPU_WIDE OUT next pid/tid: 0/0
swapper 0 [004] 762.198392: PERF_RECORD_SWITCH_CPU_WIDE IN prev pid/tid: 4073/4073
swapper 0 [004] Sp 762.198477: PERF_RECORD_SWITCH_CPU_WIDE OUT preempt next pid/tid: 4073/4073
hdparm 4073 [004] 762.198478: PERF_RECORD_SWITCH_CPU_WIDE IN prev pid/tid: 0/0
swapper 0 [007] K 762.198514: 2303073 cycles:ppp: ffffffffb98b0c66 intel_idle (/lib/modules/4.16.0-rc6+/build/vmlinux)
swapper 0 [007] Sp 762.198561: PERF_RECORD_SWITCH_CPU_WIDE OUT preempt next pid/tid: 1134/1134
kworker/u16:18 1134 [007] 762.198562: PERF_RECORD_SWITCH_CPU_WIDE IN prev pid/tid: 0/0
kworker/u16:18 1134 [007] S 762.198567: PERF_RECORD_SWITCH_CPU_WIDE OUT next pid/tid: 0/0
Signed-off-by: Alexey Budankov <alexey.budankov@linux.intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/5fc65ce7-8ca5-53ae-8858-8ddd27290575@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
||
|
Jin Yao
|
90ce61b919 |
perf script: Use HAVE_LIBXXX_SUPPORT to replace NO_LIBXXX
In Makefile.config, we define the conditional compilation variables HAVE_LIBPERL_SUPPORT and HAVE_LIBPYTHON_SUPPORT. To make the C code more consistent, this patch replaces NO_LIBPERL/NO_LIBPYTHON in C code with HAVE_LIBPERL_SUPPORT/ HAVE_LIBPYTHON_SUPPORT. Signed-off-by: Jin Yao <yao.jin@linux.intel.com> Suggested-by: Ingo Molnar <mingo@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1523269609-28824-2-git-send-email-yao.jin@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
|
Jiri Olsa
|
77f18153c0 |
perf tools: Fix snprint warnings for gcc 8
With gcc 8 we get new set of snprintf() warnings that breaks the
compilation, one example:
tests/mem.c: In function ‘check’:
tests/mem.c:19:48: error: ‘%s’ directive output may be truncated writing \
up to 99 bytes into a region of size 89 [-Werror=format-truncation=]
snprintf(failure, sizeof failure, "unexpected %s", out);
The gcc docs says:
To avoid the warning either use a bigger buffer or handle the
function's return value which indicates whether or not its output
has been truncated.
Given that all these warnings are harmless, because the code either
properly fails due to uncomplete file path or we don't care for
truncated output at all, I'm changing all those snprintf() calls to
scnprintf(), which actually 'checks' for the snprint return value so the
gcc stays silent.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com>
Link: http://lkml.kernel.org/r/20180319082902.4518-1-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
||
|
Jiri Olsa
|
3233b37a71 |
perf script: Add --show-round-event to display PERF_RECORD_FINISHED_ROUND
Adding --show-round-event to display PERF_RECORD_FINISHED_ROUND events
like:
# perf script --show-round-events 2>/dev/null
yes 8591 [002] 124177.397597: 18 cpu/mem-stores/P: ff...
yes 8591 [002] 124177.397615: 1 cpu/mem-loads,ldlat=30/P: ff...
PERF_RECORD_FINISHED_ROUND
perf 10380 [001] 124177.397622: 6 cpu/mem-loads,ldlat=30/P: ff...
PERF_RECORD_FINISHED_ROUND
swapper 0 [000] 124177.400518: 88 cpu/mem-stores/P: ff...
swapper 0 [000] 124177.400521: 88 cpu/mem-stores/P: ff...
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180206181813.10943-4-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
||
|
Arnaldo Carvalho de Melo
|
bafae98e7a |
perf evlist: Remove fcntl.h from evlist.h
Not needed there, fixup the places where it is needed and was getting only by luck via evlist.h. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-yxjpetn64z8vjuguu84gr6x6@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
|
Jin Yao
|
cc2ef584a8 |
perf script: Remove the time slices number limitation
Previously it was only allowed to use at most 10 time slices in 'perf script --time'. This patch removes this limitation. For example, following command line is OK (12 time slices) perf script --time 1%/1,1%/2,1%/3,1%/4,1%/5,1%/6,1%/7,1%/8,1%/9,1%/10,1%/11,1%/12 Signed-off-by: Jin Yao <yao.jin@linux.intel.com> Suggested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Reviewed-by: Jiri Olsa <jolsa@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Kan Liang <kan.liang@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1515596433-24653-9-git-send-email-yao.jin@linux.intel.com [ No need to check for NULL to call free, use zfree ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
|
Jin Yao
|
1e2778e916 |
perf script: Improve error msg when no first/last sample time found
The following message will be returned to user when executing 'perf script --time' if perf data file doesn't contain the first/last sample time. "HINT: no first/last sample time found in perf data. Please use latest perf binary to execute 'perf record' (if '--buildid-all' is enabled, needs to set '--timestamp-boundary')." Signed-off-by: Jin Yao <yao.jin@linux.intel.com> Reviewed-by: Jiri Olsa <jolsa@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Kan Liang <kan.liang@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1515596433-24653-3-git-send-email-yao.jin@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
|
Arnaldo Carvalho de Melo
|
eabad8c685 |
perf unwind: Do not look just at the global callchain_param.record_mode
When setting up DWARF callchains on specific events, without using
'record' or 'trace' --call-graph, but instead doing it like:
perf trace -e cycles/call-graph=dwarf/
The unwind__prepare_access() call in thread__insert_map() when we
process PERF_RECORD_MMAP(2) metadata events were not being performed,
precluding us from using per-event DWARF callchains, handling them just
when we asked for all events to be DWARF, using "--call-graph dwarf".
We do it in the PERF_RECORD_MMAP because we have to look at one of the
executable maps to figure out the executable type (64-bit, 32-bit) of
the DSO laid out in that mmap. Also to look at the architecture where
the perf.data file was recorded.
All this probably should be deferred to when we process a sample for
some thread that has callchains, so that we do this processing only for
the threads with samples, not for all of them.
For now, fix using DWARF on specific events.
Before:
# perf trace --no-syscalls -e probe_libc:inet_pton/call-graph=dwarf/ ping -6 -c 1 ::1
PING ::1(::1) 56 data bytes
64 bytes from ::1: icmp_seq=1 ttl=64 time=0.048 ms
--- ::1 ping statistics ---
1 packets transmitted, 1 received, 0% packet loss, time 0ms
rtt min/avg/max/mdev = 0.048/0.048/0.048/0.000 ms
0.000 probe_libc:inet_pton:(7fe9597bb350))
Problem processing probe_libc:inet_pton callchain, skipping...
#
After:
# perf trace --no-syscalls -e probe_libc:inet_pton/call-graph=dwarf/ ping -6 -c 1 ::1
PING ::1(::1) 56 data bytes
64 bytes from ::1: icmp_seq=1 ttl=64 time=0.060 ms
--- ::1 ping statistics ---
1 packets transmitted, 1 received, 0% packet loss, time 0ms
rtt min/avg/max/mdev = 0.060/0.060/0.060/0.000 ms
0.000 probe_libc:inet_pton:(7fd4aa930350))
__inet_pton (inlined)
gaih_inet.constprop.7 (/usr/lib64/libc-2.26.so)
__GI_getaddrinfo (inlined)
[0xffffaa804e51af3f] (/usr/bin/ping)
__libc_start_main (/usr/lib64/libc-2.26.so)
[0xffffaa804e51b379] (/usr/bin/ping)
#
# perf trace --call-graph=dwarf --no-syscalls -e probe_libc:inet_pton/call-graph=dwarf/ ping -6 -c 1 ::1
PING ::1(::1) 56 data bytes
64 bytes from ::1: icmp_seq=1 ttl=64 time=0.057 ms
--- ::1 ping statistics ---
1 packets transmitted, 1 received, 0% packet loss, time 0ms
rtt min/avg/max/mdev = 0.057/0.057/0.057/0.000 ms
0.000 probe_libc:inet_pton:(7f9363b9e350))
__inet_pton (inlined)
gaih_inet.constprop.7 (/usr/lib64/libc-2.26.so)
__GI_getaddrinfo (inlined)
[0xffffa9e8a14e0f3f] (/usr/bin/ping)
__libc_start_main (/usr/lib64/libc-2.26.so)
[0xffffa9e8a14e1379] (/usr/bin/ping)
#
# perf trace --call-graph=fp --no-syscalls -e probe_libc:inet_pton/call-graph=dwarf/ ping -6 -c 1 ::1
PING ::1(::1) 56 data bytes
64 bytes from ::1: icmp_seq=1 ttl=64 time=0.077 ms
--- ::1 ping statistics ---
1 packets transmitted, 1 received, 0% packet loss, time 0ms
rtt min/avg/max/mdev = 0.077/0.077/0.077/0.000 ms
0.000 probe_libc:inet_pton:(7f4947e1c350))
__inet_pton (inlined)
gaih_inet.constprop.7 (/usr/lib64/libc-2.26.so)
__GI_getaddrinfo (inlined)
[0xffffaa716d88ef3f] (/usr/bin/ping)
__libc_start_main (/usr/lib64/libc-2.26.so)
[0xffffaa716d88f379] (/usr/bin/ping)
#
# perf trace --no-syscalls -e probe_libc:inet_pton/call-graph=fp/ ping -6 -c 1 ::1
PING ::1(::1) 56 data bytes
64 bytes from ::1: icmp_seq=1 ttl=64 time=0.078 ms
--- ::1 ping statistics ---
1 packets transmitted, 1 received, 0% packet loss, time 0ms
rtt min/avg/max/mdev = 0.078/0.078/0.078/0.000 ms
0.000 probe_libc:inet_pton:(7fa157696350))
__GI___inet_pton (/usr/lib64/libc-2.26.so)
getaddrinfo (/usr/lib64/libc-2.26.so)
[0xffffa9ba39c74f40] (/usr/bin/ping)
#
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Hendrick Brueckner <brueckner@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Thomas Richter <tmricht@linux.vnet.ibm.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/r/20180116182650.GE16107@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
||
|
Jiri Olsa
|
3d7c27b6db |
perf script: Add support to display lost events
Adding option to display lost events: $ perf script --show-lost-events ... mplayer 13810 [002] 468011.402396: 100 cycles:ppp: ff.. mplayer 13810 [002] 468011.402396: PERF_RECORD_LOST lost 3880 mplayer 13810 [002] 468011.402397: 100 cycles:ppp: ff.. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20180107160356.28203-10-jolsa@kernel.org [ Use PRIu64 when printing u64 values, fixing the build in some arches ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
|
Jiri Olsa
|
28a0b39877 |
perf script: Add support to display sample misc field
Adding support to display sample misc field in form of letter for each bit: # perf script -F +misc ... sched-messaging 1414 K 28690.636582: 4590 cycles ... sched-messaging 1407 U 28690.636600: 325620 cycles ... sched-messaging 1414 K 28690.636608: 19473 cycles ... misc field __________/ The misc bits are assigned to following letters: PERF_RECORD_MISC_KERNEL K PERF_RECORD_MISC_USER U PERF_RECORD_MISC_HYPERVISOR H PERF_RECORD_MISC_GUEST_KERNEL G PERF_RECORD_MISC_GUEST_USER g PERF_RECORD_MISC_MMAP_DATA* M PERF_RECORD_MISC_COMM_EXEC E PERF_RECORD_MISC_SWITCH_OUT S Signed-off-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20180107160356.28203-9-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
|
Jin Yao
|
2ab046cd01 |
perf script: Support time percent and multiple time ranges
perf script has a --time option to limit the time range of output. It
only supports absolute time.
Now this option is extended to support multiple time ranges and support
the percent of time.
For example:
1. Select the first and second 10% time slices:
perf script --time 10%/1,10%/2
2. Select from 0% to 10% and 30% to 40% slices:
perf script --time 0%-10%,30%-40%
Changelog:
v6: Fix the merge issue with latest perf/core branch.
No functional changes.
v5: Add checking of first/last sample time to detect if it's recorded
in perf.data. If it's not recorded, returns error message to user.
v4: Remove perf_time__skip_sample, only uses perf_time__ranges_skip_sample
v3: Since the definitions of first_sample_time/last_sample_time
are moved from perf_session to perf_evlist so change the
related code.
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1512738826-2628-7-git-send-email-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|