Commit Graph

623 Commits

Author SHA1 Message Date
Bjorn Helgaas
9195e6dd9b Merge branch 'pci/ctrl/qcom'
- Add PHY clock source implementation (Dmitry Baryshkov)

- Use new clk_regmap_phy_mux_ops for gcc-sm8450 and gcc-sc7280 PCIe pipe
  clocks (Dmitry Baryshkov)

- Set up rev 2.1.0 PARF_PHY before enabling clocks (Christian Marangi)

- Power on PHY before accessing IPQ8074 DBI registers to avoid boot hangs
  (Robert Marko)

- Power on PHY before accessing DBI registers on all variants for
  consistency (Robert Marko)

- Remove unnecessary pipe_clk handling since this is done in PHY drivers
  (Dmitry Baryshkov)

- Drop manual pipe_clk_src handling (Dmitry Baryshkov)

- Move GEN3_RELATED DBI definitions to common dwc header (Baruch Siach)

- Define slot capabilities using generic PCI_EXP_SLTCAP_* macros (Baruch
  Siach)

- Add IPQ60xx support (Selvam Sathappan Periakaruppan)

- Fix DT description typo (Baruch Siach)

- Fix DT "compatibles" typo (Johan Hovold)

- Allow ASPM L1 and substates for 2.7.0 (Krishna chaitanya chundru)

* pci/ctrl/qcom:
  PCI: qcom: Allow ASPM L1 and substates for 2.7.0
  dt-bindings: PCI: qcom: Fix reset conditional
  dt-bindings: PCI: qcom: Fix description typo
  PCI: qcom: Add IPQ60xx support
  PCI: qcom: Define slot capabilities using PCI_EXP_SLTCAP_*
  PCI: dwc: Move GEN3_RELATED DBI definitions to common header
  PCI: qcom: Drop manual pipe_clk_src handling
  PCI: qcom: Remove unnecessary pipe_clk handling
  PCI: qcom: Power on PHY before DBI register accesses
  PCI: qcom: Power on PHY before IPQ8074 DBI register accesses
  PCI: qcom: Set up rev 2.1.0 PARF_PHY before enabling clocks
  clk: qcom: gcc-sc7280: use new clk_regmap_phy_mux_ops for PCIe pipe clocks
  clk: qcom: gcc-sm8450: use new clk_regmap_phy_mux_ops for PCIe pipe clocks
  clk: qcom: regmap: add PHY clock source implementation
2022-08-04 11:41:58 -05:00
Bjorn Helgaas
468276d4ea Merge branch 'pci/ctrl/imx6'
- Factor out ref clock disables to match enables (Bjorn Helgaas)

- Collect clock enables in imx6_pcie_clk_enable() (Richard Zhu)

- Propagate regulator and clock errors back to .host_init() caller (Richard
  Zhu)

- Disable i.MX6QDL clock when disabling ref clocks (Richard Zhu)

- Call host init function directly in resume instead of duplicating the
  code (Richard Zhu)

- Turn off regulators when suspending (Richard Zhu)

- Make link being down a non-fatal error so probe doesn't fail (Richard
  Zhu)

- Start link in resume only if it was up before suspend to reduce resume
  time (Richard Zhu)

- Move PHY init and power-on out of clock- and reset-related functions
  (Richard Zhu)

- Rework suspend callback to be more symmetric with resume (Richard Zhu)

- Set PCIE_DBI_RO_WR_EN before writing DBI registers (Richard Zhu)

- Allow speeds faster than Gen2 (Richard Zhu)

* pci/ctrl/imx6:
  PCI: imx6: Support more than Gen2 speed link mode
  PCI: imx6: Set PCIE_DBI_RO_WR_EN before writing DBI registers
  PCI: imx6: Reformat suspend callback to keep symmetric with resume
  PCI: imx6: Move the imx6_pcie_ltssm_disable() earlier
  PCI: imx6: Disable clocks in reverse order of enable
  PCI: imx6: Do not hide PHY driver callbacks and refine the error handling
  PCI: imx6: Reduce resume time by only starting link if it was up before suspend
  PCI: imx6: Mark the link down as non-fatal error
  PCI: imx6: Move regulator enable out of imx6_pcie_deassert_core_reset()
  PCI: imx6: Turn off regulator when system is in suspend mode
  PCI: imx6: Call host init function directly in resume
  PCI: imx6: Disable i.MX6QDL clock when disabling ref clocks
  PCI: imx6: Propagate .host_init() errors to caller
  PCI: imx6: Collect clock enables in imx6_pcie_clk_enable()
  PCI: imx6: Factor out ref clock disable to match enable
  PCI: imx6: Move imx6_pcie_clk_disable() earlier
  PCI: imx6: Move imx6_pcie_enable_ref_clk() earlier
  PCI: imx6: Move PHY management functions together
  PCI: imx6: Move imx6_pcie_grp_offset(), imx6_pcie_configure_type() earlier
  PCI: imx6: Convert to NOIRQ_SYSTEM_SLEEP_PM_OPS()
2022-08-04 11:41:55 -05:00
Bjorn Helgaas
0c8b7d1273 Merge branch 'pci/ctrl/fu740'
- Remove unnecessary include files (Bjorn Helgaas)

* pci/ctrl/fu740:
  PCI: fu740: Remove unnecessary include files
2022-08-04 11:41:55 -05:00
Richard Zhu
6213c6c545 PCI: imx6: Support more than Gen2 speed link mode
Support more than Gen2 speed link mode, since i.MX8MP PCIe supports up to
Gen3 link speed.

Link: https://lore.kernel.org/r/1658287576-26908-1-git-send-email-hongxing.zhu@nxp.com
Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2022-08-01 15:34:17 -05:00
Richard Zhu
13f8f3d1e3 PCI: imx6: Set PCIE_DBI_RO_WR_EN before writing DBI registers
The PCIE_DBI_RO_WR_EN bit should be set when write some DBI registers.  To
make sure that the DBI registers are writable, set the PCIE_DBI_RO_WR_EN
properly when writing the DBI registers.

Link: https://lore.kernel.org/r/1652866528-13220-1-git-send-email-hongxing.zhu@nxp.com
Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2022-08-01 15:34:13 -05:00
Richard Zhu
835a345b18 PCI: imx6: Reformat suspend callback to keep symmetric with resume
Create imx6_pcie_stop_link() and imx6_pcie_host_exit() functions.
Encapsulate clocks, regulators disables and PHY uninitialization into
imx6_pcie_host_exit().

To keep suspend/resume symmetric as much as possible, invoke these two
new created functions in suspend callback.

To be symmetric with imx6_pcie_host_exit(), move imx6_pcie_clk_enable()
to imx6_pcie_host_init() from imx6_pcie_deassert_core_reset().

Link: https://lore.kernel.org/r/1657783869-19194-18-git-send-email-hongxing.zhu@nxp.com
Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
2022-08-01 15:34:09 -05:00
Richard Zhu
1c5e761565 PCI: imx6: Move the imx6_pcie_ltssm_disable() earlier
Move the imx6_pcie_ltssm_disable() earlier and place it just behind the
imx6_pcie_ltssm_enable(), since it might not be only used by suspend
callback directly.

To be symmetric with imx6_pcie_ltssm_enable(), add the IMX6Q and IMX8MQ
switch cases in imx6_pcie_ltssm_disable().

Link: https://lore.kernel.org/r/1657783869-19194-17-git-send-email-hongxing.zhu@nxp.com
Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2022-08-01 15:34:05 -05:00
Bjorn Helgaas
34eb543f4f PCI: imx6: Disable clocks in reverse order of enable
imx6_pcie_clk_enable() enables clocks in the order:

  pcie_phy
  pcie_bus
  pcie
  imx6_pcie_enable_ref_clk

Change imx6_pcie_clk_disable() to disable them in the reverse order.

Link: https://lore.kernel.org/r/1657783869-19194-16-git-send-email-hongxing.zhu@nxp.com
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Acked-by: Richard Zhu <hongxing.zhu@nxp.com>
2022-08-01 15:34:01 -05:00
Richard Zhu
cf236e0c0d PCI: imx6: Do not hide PHY driver callbacks and refine the error handling
Move the phy_power_on() to host_init from imx6_pcie_clk_enable().

Move the phy_init() to host_init from imx6_pcie_deassert_core_reset().

Refine the error handling in imx6_pcie_host_init() accordingly.

Link: https://lore.kernel.org/r/1657783869-19194-15-git-send-email-hongxing.zhu@nxp.com
Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2022-08-01 15:33:58 -05:00
Richard Zhu
af48f8226e PCI: imx6: Reduce resume time by only starting link if it was up before suspend
i.MX PCIe doesn't support hotplug. During resume, only start PCIe link
training when the link was up before system suspend to avoid the long
latency in the link training period.

Link: https://lore.kernel.org/r/1657783869-19194-14-git-send-email-hongxing.zhu@nxp.com
Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2022-08-01 15:33:54 -05:00
Richard Zhu
508919d0a9 PCI: imx6: Mark the link down as non-fatal error
If the PCIe link is down, return zero from imx6_pcie_start_link() so the
driver will probe successfully.

Link: https://lore.kernel.org/r/1657783869-19194-13-git-send-email-hongxing.zhu@nxp.com
Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
2022-08-01 15:33:50 -05:00
Richard Zhu
f0691e326b PCI: imx6: Move regulator enable out of imx6_pcie_deassert_core_reset()
Move regulator enable out of imx6_pcie_deassert_core_reset(), since the
regulator_enable() has nothing to do with imx6_pcie_deassert_core_reset().

Link: https://lore.kernel.org/r/1657783869-19194-12-git-send-email-hongxing.zhu@nxp.com
Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2022-08-01 15:33:46 -05:00
Richard Zhu
a4bb720eeb PCI: imx6: Turn off regulator when system is in suspend mode
The driver should undo any enables it did itself. The regulator disable
shouldn't be basing decisions on regulator_is_enabled().

Move the regulator_disable to the suspend function, turn off regulator when
the system is in suspend mode.

Link: https://lore.kernel.org/r/1657783869-19194-11-git-send-email-hongxing.zhu@nxp.com
Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2022-08-01 15:33:42 -05:00
Richard Zhu
cfacf22e0d PCI: imx6: Call host init function directly in resume
Call imx6_pcie_host_init() instead of duplicating codes in resume.  Note
that this also means we do MPLL setup again during resume, which we didn't
do before.

[bhelgaas: add MPLL setup note, pointed out by Lucas]
Link: https://lore.kernel.org/r/1657783869-19194-10-git-send-email-hongxing.zhu@nxp.com
Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
2022-08-01 15:33:39 -05:00
Richard Zhu
fea446eb9c PCI: imx6: Disable i.MX6QDL clock when disabling ref clocks
When disabling PCIe clocks, disable i.MX6QDL ref clock too.

Link: https://lore.kernel.org/r/1657783869-19194-9-git-send-email-hongxing.zhu@nxp.com
Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
2022-08-01 15:33:35 -05:00
Richard Zhu
9751f65db0 PCI: imx6: Propagate .host_init() errors to caller
Since dw_pcie_host_init() checks for errors from ops->host_init(),
check for errors when enabling power regulators and clocks and return them.

[bhelgaas: commit log]
Link: https://lore.kernel.org/r/1657783869-19194-8-git-send-email-hongxing.zhu@nxp.com
Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
2022-08-01 15:33:32 -05:00
Richard Zhu
835fe229d7 PCI: imx6: Collect clock enables in imx6_pcie_clk_enable()
Encapsulate the i.MX PCIe clock enable operations into one standalone
function, imx6_pcie_clk_enable().  No functional change intended.

[bhelgaas: split pure code moves into separate patches]
Link: https://lore.kernel.org/r/1657783869-19194-7-git-send-email-hongxing.zhu@nxp.com
Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
2022-08-01 15:33:28 -05:00
Bjorn Helgaas
d0a75c791f PCI: imx6: Factor out ref clock disable to match enable
The PCIe ref clocks are specific to different variants.  The enables are
already split out into imx6_pcie_enable_ref_clk(), but the disables were
combined with the more generic bus/phy/pcie clock disables in
imx6_pcie_clk_disable().

Split out the variant-specific disables into imx6_pcie_disable_ref_clk() to
match imx6_pcie_enable_ref_clk().

No functional change intended.

Link: https://lore.kernel.org/r/1657783869-19194-6-git-send-email-hongxing.zhu@nxp.com
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Acked-by: Richard Zhu <hongxing.zhu@nxp.com>
2022-08-01 15:33:24 -05:00
Richard Zhu
34b1b90225 PCI: imx6: Move imx6_pcie_clk_disable() earlier
Move imx6_pcie_clk_disable() earlier to be near other clock-related
functions.  No functional change intended.

[bhelgaas: reorder patch so pure moves are earlier]
Link: https://lore.kernel.org/r/1657783869-19194-5-git-send-email-hongxing.zhu@nxp.com
Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
2022-08-01 15:33:21 -05:00
Bjorn Helgaas
276509690c PCI: imx6: Move imx6_pcie_enable_ref_clk() earlier
Move imx6_pcie_enable_ref_clk() earlier so it's not in the middle between
imx6_pcie_assert_core_reset() and imx6_pcie_deassert_core_reset().  No
functional change intended.

Link: https://lore.kernel.org/r/1657783869-19194-4-git-send-email-hongxing.zhu@nxp.com
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Acked-by: Richard Zhu <hongxing.zhu@nxp.com>
2022-08-01 15:33:17 -05:00
Bjorn Helgaas
6b1e989e49 PCI: imx6: Move PHY management functions together
Collect imx6_pcie_init_phy(), imx7d_pcie_wait_for_phy_pll_lock(), and
imx6_setup_phy_mpll() earlier with other PHY-related code.  No functional
change intended.

Link: https://lore.kernel.org/r/1657783869-19194-3-git-send-email-hongxing.zhu@nxp.com
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Acked-by: Richard Zhu <hongxing.zhu@nxp.com>
2022-08-01 15:33:13 -05:00
Bjorn Helgaas
79f14b6f1c PCI: imx6: Move imx6_pcie_grp_offset(), imx6_pcie_configure_type() earlier
Move imx6_pcie_grp_offset() and imx6_pcie_configure_type() earlier in the
file since they depend on nothing and are used by several other functions
that will be moved earlier.  No functional change intended.

Link: https://lore.kernel.org/r/1657783869-19194-2-git-send-email-hongxing.zhu@nxp.com
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Acked-by: Richard Zhu <hongxing.zhu@nxp.com>
2022-08-01 15:33:08 -05:00
Bjorn Helgaas
9d14ad6155 PCI: imx6: Convert to NOIRQ_SYSTEM_SLEEP_PM_OPS()
Replace SET_NOIRQ_SYSTEM_SLEEP_PM_OPS() with NOIRQ_SYSTEM_SLEEP_PM_OPS(),
which has the advantage that the compiler always sees the PM callbacks as
referenced, so they don't need to be wrapped with "#ifdef CONFIG_PM_SLEEP"
or tagged with "__maybe_unused" to avoid "defined but not used" warnings.

See 1a3c7bb088 ("PM: core: Add new *_PM_OPS macros, deprecate old ones").

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
2022-08-01 15:33:00 -05:00
Marek Szyprowski
22f3571cbc PCI: exynos: Correct generic PHY usage
The proper initialization for generic PHYs is to call first phy_init(),
then phy_power_on().

While touching this, remove the phy_reset() call. It is just a left-over
from the obsoleted Exynos5440 support and the current exynos-pcie PHY
driver doesn't even support this function. It is also rarely used by other
drivers.

Link: https://lore.kernel.org/r/20220628220409.26545-2-m.szyprowski@samsung.com
Reported-by: Bjorn Helgaas <helgaas@kernel.org>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Chanho Park <chanho61.park@samsung.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2022-08-01 15:25:16 -05:00
Dmitry Baryshkov
cd761378e6 PCI: dwc: Handle MSIs routed to multiple GIC interrupts
On some Qualcomm platforms each group of 32 MSI vectors is routed to a
separate GIC interrupt. Implement support for such configurations by
parsing "msi0" ... "msiX" interrupts and attaching them to the chained
handler.

Note that if DT doesn't list an array of MSI interrupts and uses a single
"msi" IRQ, the driver will limit the number of supported MSI vectors to 32.

Link: https://lore.kernel.org/r/20220707134733.2436629-5-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2022-08-01 15:15:33 -05:00
Dmitry Baryshkov
db388348ac PCI: dwc: Convert struct pcie_port.msi_irq to an array
The Qualcomm DWC PCIe controller supports more than 32 MSI interrupts, but
they are routed to separate interrupts in groups of 32 vectors. To support
this configuration, change the msi_irq field to an array. Let the DWC core
handle all interrupts that were set in this array.

[bhelgaas: reorder, drop "irq" temporary to make patch cleaner]
Link: https://lore.kernel.org/r/20220707134733.2436629-3-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2022-08-01 15:15:33 -05:00
Dmitry Baryshkov
226ec08749 PCI: dwc: Split MSI IRQ parsing/allocation to a separate function
Split handling of MSI host IRQs to a separate dw_pcie_msi_host_init()
function. The code is complex enough to warrant a separate function.

[bhelgaas: reorder patch earlier]
Link: https://lore.kernel.org/r/20220707134733.2436629-4-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2022-08-01 15:15:33 -05:00
Dmitry Baryshkov
3c62f878a9 PCI: dwc: Correct msi_irq condition in dw_pcie_free_msi()
The dwc-based drivers set pp->msi_irq to -ENODEV if they do not want the
dwc core to do anything with pp->msi_irq.

dw_pcie_host_init() sets the handler and data when "pp->msi_irq > 0", so
use the same condition when removing the handler and data in
dw_pcie_free_msi().

Link: https://lore.kernel.org/r/20220707134733.2436629-2-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2022-08-01 15:15:32 -05:00
Christophe JAILLET
6be6f8529b PCI: dwc: Use the bitmap API to allocate bitmaps
Use devm_bitmap_zalloc() instead of hand-writing them.

It is less verbose and it improves the semantic.

Link: https://lore.kernel.org/r/bc6586a603abc0db7d4531308b698fbe7a6d7083.1657375829.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2022-08-01 15:15:32 -05:00
Will McVicker
35797e672f PCI: dwc: Fix MSI msi_msg DMA mapping
As of 07940c369a ("PCI: dwc: Fix MSI page leakage in suspend/resume"),
the PCIe designware host driver has been using the driver data allocation
for the msi_msg DMA mapping which can result in a DMA_MAPPING_ERROR due to
the DMA overflow check in dma_direct_map_page() when the address is greater
than 32 bits (reported in [1]). The commit was trying to address a memory
leak on suspend/resume by moving the MSI mapping to dw_pcie_host_init(),
but subsequently dropped the page allocation thinking it wasn't needed.

To fix the DMA mapping issue as well as make msi_msg DMA'able, switch back
to allocating a 32-bit page for the msi_msg. To avoid the suspend/resume
leak, allocate the page in dw_pcie_host_init() since that shouldn't be
called during suspend/resume.

[1] https://lore.kernel.org/all/Yo0soniFborDl7+C@google.com/

Signed-off-by: Will McVicker <willmcvicker@google.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Rob Herring <robh@kernel.org>
2022-08-01 15:15:32 -05:00
Serge Semin
ce06bf5703 PCI: dwc: Check iATU in/outbound range setup status
Make the DWC PCIe RC/EP safer and more verbose for invalid or failed
inbound and outbound iATU window setups.  Silently ignoring iATU regions
setup errors may cause unpredictable errors. For instance if a cfg or IO
window fails to be activated, then any CFG/IO requested won't reach target
PCIe devices and the corresponding accessors will return platform-specific
random values.

[bhelgaas: trim commit log]
Link: https://lore.kernel.org/r/20220624143947.8991-15-Sergey.Semin@baikalelectronics.ru
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2022-08-01 15:15:32 -05:00
Serge Semin
edf408b946 PCI: dwc: Validate iATU outbound mappings against hardware constraints
Make __dw_pcie_prog_outbound_atu() check the requested region base and size
against what the hardware can support.  Return error if the region is not
correctly aligned or of a supported size.

[bhelgaas: commit log]
Link: https://lore.kernel.org/r/20220624143947.8991-14-Sergey.Semin@baikalelectronics.ru
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2022-08-01 15:15:32 -05:00
Serge Semin
89473aa9ab PCI: dwc: Add iATU regions size detection procedure
The DWC PCIe RC/EP/DM IP core configuration parameters determine the number
of inbound and outbound iATU windows, alignment requirements (which is also
the minimum window size), minimum and maximum sizes.  If internal ATU is
enabled, the former settings are determined by CX_ATU_MIN_REGION_SIZE; the
latter are determined by CX_ATU_MAX_REGION_SIZE.

Determine the required alignment and maximum size supported by the
controller and log it to help verify whether the requested inbound or
outbound memory mappings can be fully created.

Note 1. The extended iATU regions have been supported since DWC PCIe
v4.60a. There is no need in testing the upper limit register availability
for the older cores.

Note 2. The regions alignment is determined with using the fls() method
since the lower four bits of the ATU Limit register can be occupied with
the Circular Buffer Increment setting, which can be initialized with zeros.

Link: https://lore.kernel.org/r/20220624143947.8991-13-Sergey.Semin@baikalelectronics.ru
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2022-08-01 15:15:32 -05:00
Serge Semin
5a163f5998 PCI: dwc: Simplify in/outbound iATU setup methods
Previously __dw_pcie_prog_outbound_atu() duplicated a lot of code between
the iatu_unroll_enabled version and the PCIE_ATU_VIEWPORT version:

  __dw_pcie_prog_outbound_atu
    if (iatu_unroll_enabled)
      dw_pcie_prog_outbound_atu_unroll
        dw_pcie_writel_ob_unroll(PCIE_ATU_UNR_LOWER_BASE, ...)
        dw_pcie_writel_ob_unroll(PCIE_ATU_UNR_UPPER_BASE, ...)
        ...
      return
    dw_pcie_writel_dbi(PCIE_ATU_VIEWPORT, ...)
    dw_pcie_writel_dbi(PCIE_ATU_LOWER_BASE, ...)
    dw_pcie_writel_dbi(PCIE_ATU_UPPER_BASE, ...)
    ...

Unify those by pushing the unroll address computation and viewport
selection down into dw_pcie_writel_atu() so we can use the same
dw_pcie_writel_atu_ob() accessor for both paths:

  __dw_pcie_prog_outbound_atu
    dw_pcie_writel_atu_ob(PCIE_ATU_LOWER_BASE, ...)
      dw_pcie_writel_atu
        dw_pcie_select_atu                      # new
          if (iatu_unroll_enabled)
            return pci->atu_base + PCIE_ATU_UNROLL_BASE(...)
          dw_pcie_writel_dbi(PCIE_ATU_VIEWPORT, ...)
          return pci->atu_base
        dw_pcie_write(base + reg)
      dw_pcie_writel_atu_ob(PCIE_ATU_UPPER_BASE, ...)
      ...

In the non-unroll case, this does involve more MMIO writes to
PCIE_ATU_VIEWPORT, but it's mainly in initialization paths and the code
simplification is significant.

[bhelgaas: commit log, simplify dw_pcie_select_atu()]
Link: https://lore.kernel.org/r/20220624143947.8991-12-Sergey.Semin@baikalelectronics.ru
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2022-08-01 15:15:09 -05:00
Serge Semin
38fe272389 PCI: dwc: Drop enum dw_pcie_region_type in favor of PCIE_ATU_REGION_DIR_IB/OB
Previously callers of dw_pcie_disable_atu() supplied enum
dw_pcie_region_type (DW_PCIE_REGION_INBOUND, DW_PCIE_REGION_OUTBOUND),
which dw_pcie_disable_atu() converted to the PCIE_ATU_REGION_DIR_IB or
PCIE_ATU_REGION_DIR_OB values needed to program the ATU registers.

Simplify the code by dropping the dw_pcie_region_type enum and passing
PCIE_ATU_REGION_DIR_IB or PCIE_ATU_REGION_DIR_OB directly.

Reorder dw_pcie_disable_atu() arguments to (dir, index) since "index"
indicates an ATU window in the regions of the corresponding direction.

[bhelgaas: commit log]
Link: https://lore.kernel.org/r/20220624143947.8991-11-Sergey.Semin@baikalelectronics.ru
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2022-08-01 15:07:55 -05:00
Serge Semin
4859db9bca PCI: dwc: Drop enum dw_pcie_as_type in favor of PCIE_ATU_TYPE_MEM/IO
Previously dw_pcie_ep_set_bar() converted the BAR PCI_BASE_ADDRESS_SPACE
bit to the internal dw_pcie_as_type enum (DW_PCIE_AS_MEM, DW_PCIE_AS_IO)
and passed it down to dw_pcie_prog_inbound_atu(), which converted the enum
to the PCIE_ATU_TYPE_MEM/PCIE_ATU_TYPE_IO values needed to program the ATU
registers.

Simplify the code by dropping the dw_pcie_as_type enum and passing
PCIE_ATU_TYPE_MEM or PCIE_ATU_TYPE_IO directly.

Reorder inbound ATU function arguments to match the outbound functions,
with address-related parameters at the end.

[bhelgaas: commit log]
Link: https://lore.kernel.org/r/20220624143947.8991-10-Sergey.Semin@baikalelectronics.ru
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2022-08-01 15:07:41 -05:00
Serge Semin
c6481d51dc PCI: dwc: Add dw_pcie_ops.host_deinit() callback
dw_pcie_host_init() calls the dw_pcie_ops.host_init() callback to do
platform-specific host initialization.

Add a dw_pcie_ops.host_deinit() callback to perform the corresponding
cleanups in dw_pcie_host_deinit() and in dw_pcie_host_init() failure paths.

Link: https://lore.kernel.org/r/20220624143947.8991-9-Sergey.Semin@baikalelectronics.ru
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2022-08-01 15:07:34 -05:00
Serge Semin
58c379eee6 PCI: tegra194: Drop manual DW PCIe controller version setup
Since the DW PCIe common code (dw_pcie_version_detect()) now reads the IP
core version directly from the hardware, there is no point manually setting
the version for controllers newer than v4.70a.

Tegra194 only supports v4.90a, so remove the now-superfluous code that sets
struct dw_pcie.version.

Suggested-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220624143947.8991-8-Sergey.Semin@baikalelectronics.ru
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2022-08-01 15:07:23 -05:00
Serge Semin
50deb8ac61 PCI: intel-gw: Drop manual DW PCIe controller version setup
Since the DW PCIe common code (dw_pcie_version_detect()) now reads the IP
core version directly from the hardware, there is no point manually setting
the version for controllers newer than v4.70a.

Remove the now-superfluous intel-gw code that sets struct dw_pcie.version.

Suggested-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220624143947.8991-7-Sergey.Semin@baikalelectronics.ru
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2022-08-01 15:07:02 -05:00
Serge Semin
0b0a780d52 PCI: dwc: Add macros to compare Synopsys IP core versions
Add macros to compare DWC IP core versions:

  dw_pcie_ver_is()
  dw_pcie_ver_is_ge()
  dw_pcie_ver_type_is()
  dw_pcie_ver_type_is_ge()

These are along the lines of DWC3_VER_IS() and dw_spi_ver_is().

[bhelgaas: commit log]
Link: https://lore.kernel.org/r/20220624143947.8991-6-Sergey.Semin@baikalelectronics.ru
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Rob Herring <robh@kernel.org>
2022-08-01 15:02:36 -05:00
Serge Semin
13e9d3900c PCI: dwc: Read DWC IP core version from register
Since DWC PCIe v4.70a, the controller version and version type can be read
from the PORT_LOGIC.PCIE_VERSION_OFF and PORT_LOGIC.PCIE_VERSION_TYPE_OFF
registers respectively.

Read the version from those registers and warn if if's different from the
version we got from the device tree.

We can only read the version after platform-specific drivers have done any
DBI-related initialization, such as reference clock activation.

[bhelgaas: commit log]
Link: https://lore.kernel.org/r/20220624143947.8991-5-Sergey.Semin@baikalelectronics.ru
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2022-08-01 15:02:11 -05:00
Serge Semin
afe1c6d50d PCI: dwc: Use native DWC IP core version representation
Save the DWC IP core version in the same format as the
PORT_LOGIC.PCIE_VERSION_OFF register, similar to what other drivers for DWC
IP do (dw_spi_hw_init(), dwc3_core_is_valid(), stmmac_hwif_init()).

[bhelgaas: trim commit log]
Link: https://lore.kernel.org/r/20220624143947.8991-4-Sergey.Semin@baikalelectronics.ru
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2022-08-01 15:01:57 -05:00
Serge Semin
e3dc79adfa PCI: dwc: Detect iATU settings after getting "addr_space" resource
Previously, dw_pcie_ep_init() did:

  dw_pcie_iatu_detect(pci);
  res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "addr_space");
  if (!res)
    return -EINVAL;

The platform_get_resource_byname() can fail, and dw_pcie_iatu_detect()
doesn't depend on the "addr_space" resource, so delay it until afterwards,
i.e.,

  platform_get_resource_byname(pdev, IORESOURCE_MEM, "addr_space");
  dw_pcie_iatu_detect(pci);

[bhelgaas: commit log]
Link: https://lore.kernel.org/r/20220624143947.8991-3-Sergey.Semin@baikalelectronics.ru
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2022-08-01 15:01:41 -05:00
Serge Semin
14c4ad125c PCI: dwc: Log link speed and width if it comes up
Printing just "link up" isn't very informative for PCI Express. Even if the
link is up, bus performance can degrade to slower speeds or to narrower
width than both Root Port and its partner is capable of. In that case it
would be handy to know the link specifications as early as possible.

If the link comes up, log the link speed (PCIe generation) and width.

Link: https://lore.kernel.org/r/20220624143947.8991-2-Sergey.Semin@baikalelectronics.ru
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2022-08-01 15:01:25 -05:00
Krishna chaitanya chundru
5147ba8af2 PCI: qcom: Allow ASPM L1 and substates for 2.7.0
Allow ASPM L1 and its substates.  By default this is disabled in the qcom
specific hardware.  Enable it explicitly only for controllers belonging to
2_7_0.

This does not affect any link capability registers; it will allow the link
transitions to L1 and its substates only if they are already supported.

Link: https://lore.kernel.org/r/1657886366-32685-1-git-send-email-quic_krichai@quicinc.com
Signed-off-by: Krishna chaitanya chundru <quic_krichai@quicinc.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Acked-by: Stanimir Varbanov <svarbanov@mm-sol.com>
2022-07-29 12:17:00 -05:00
Bjorn Helgaas
15a232408a PCI: fu740: Remove unnecessary include files
fu740 uses no syscon or regman interfaces, so it doesn't need to include
mfs/syscon.h.  It uses no regulator interfaces, so it doesn't need to
include regulator/consumer.h either.

Remove both unnecessary includes.

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2022-07-19 12:29:38 -05:00
Selvam Sathappan Periakaruppan
0cf7c2efe8 PCI: qcom: Add IPQ60xx support
IPQ60xx series of SoCs have one port of PCIe gen 3. Add support for that
platform.

The code is based on downstream[1] Codeaurora kernel v5.4 (branch
win.linuxopenwrt.2.0).

Split out the DBI registers access part from .init into .post_init. DBI
registers are only accessible after phy_power_on().

[1] https://source.codeaurora.org/quic/qsdk/oss/kernel/linux-ipq-5.4/

Link: https://lore.kernel.org/r/f7f848653c99abbf9a0f877949a44e52329543ae.1655799816.git.baruch@tkos.co.il
Tested-by: Robert Marko <robert.marko@sartura.hr>
Signed-off-by: Selvam Sathappan Periakaruppan <quic_speriaka@quicinc.com>
Signed-off-by: Baruch Siach <baruch.siach@siklu.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Acked-by: Stanimir Varbanov <svarbanov@mm-sol.com>
2022-07-15 15:30:57 -05:00
Baruch Siach
9a765805f6 PCI: qcom: Define slot capabilities using PCI_EXP_SLTCAP_*
The PCIE_CAP_LINK1_VAL macro actually defines slot capabilities. Use
PCI_EXP_SLTCAP_* macros to spell its value, and rename it to better
describe its meaning.

Link: https://lore.kernel.org/r/3025d5e1d8da64798db6958f9780c4763fbcac47.1655799816.git.baruch@tkos.co.il
Signed-off-by: Baruch Siach <baruch.siach@siklu.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Stanimir Varbanov <svarbanov@mm-sol.com>
2022-07-15 15:30:57 -05:00
Baruch Siach
996ab868d6 PCI: dwc: Move GEN3_RELATED DBI definitions to common header
These are common dwc macros that will be used for other platforms.

Link: https://lore.kernel.org/r/1c2d5a7a139be81fa15f356b2380163dbdebdc09.1655799816.git.baruch@tkos.co.il
Signed-off-by: Baruch Siach <baruch.siach@siklu.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Rob Herring <robh@kernel.org>
2022-07-15 15:30:57 -05:00
Dmitry Baryshkov
7eb5768c26 PCI: qcom: Drop manual pipe_clk_src handling
Manual reparenting of pipe_clk_src is being replaced with the parking of
the clock with clk_disable()/clk_enable() in the PHY driver. Drop
redundant code switching of the pipe clock between the PHY clock source
and the safe bi_tcxo.

Link: https://lore.kernel.org/r/20220608105238.2973600-6-dmitry.baryshkov@linaro.org
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Acked-by: Stanimir Varbanov <svarbanov@mm-sol.com>
2022-07-15 15:30:47 -05:00