Commit Graph

114 Commits

Author SHA1 Message Date
Paul E. McKenney
39687d6c1d rcutorture: Correctly handle CONFIG_RCU_TORTURE_TEST_* options
The rcutorture scripting handles the CONFIG_*_TORTURE_TEST Kconfig
options specially, and therefore greps them out of the Kconfig-fragment
files.  Unfortunately, a poor choice of grep pattern means that the
CONFIG_RCU_TORTURE_TEST_SLOW_CLEANUP, CONFIG_RCU_TORTURE_TEST_SLOW_INIT,
and CONFIG_RCU_TORTURE_TEST_SLOW_PREINIT Kconfig options are also grepped
out, preventing rcutorture from using them.  This commit therefore fixes
the offending grep pattern to focus only on the CONFIG_*_TORTURE_TEST
Kconfig options.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2017-06-08 08:25:22 -07:00
Paul E. McKenney
3c52f26227 rcutorture: Fix bug in reporting Kconfig mis-settings
Kconfig "select" clauses can defeat Kconfig-fragment file attempts to
clear a given Kconfig variable, and dependencies can defeat attempts to
set a given Kconfig variable.  Because "select" clauses and dependencies
can be added at any time, there needs to be a way to verify that the
Kconfig-fragment file's requests were honored.  And there is, except
that it is buggy.  This commit therefore provides the needed fix.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2017-06-08 08:25:20 -07:00
Paul E. McKenney
6bb7ff175e torture: Use correct path for Kconfig fragment for duplicates
Currently, the rcutorture scripting will give an error message if
running a duplicate scenario that happens also to have a non-existent
build directory (b1, b2, ... in the rcutorture directory).  Worse yet, if
the build directory has already been created and used for a real build,
the script will silently grab the wrong Kconfig fragment, which could
cause confusion to the poor sap (me) analyzing old test results.  At
least the actual test runs correctly...

This commit therefore accesses the Kconfig fragment from the results
directory corresponding to the first of the duplicate scenarios, for
which a build was actually carried out.  This prevents both the messages
and at least one form of later confusion.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2017-04-19 09:29:19 -07:00
Paul E. McKenney
1f32ee6586 torture: Prevent jitter from delaying build-only runs
Currently, if the --jitter flag specifies jitter for a --build-only
run, the system will obediently build a kernel, refuse to launch it,
launch the requested number of jitter processes, and wait for the
specified kernel run time, which defaults to 30 minutes.  This is
of course quite pointless.

This commit therefore disables jitter on build-only runs.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
2016-11-14 10:48:59 -08:00
Paul E. McKenney
65cbea5bbd torture: Inflict default jitter
This commit enables jitter by default.  It may be manually disabled
by passing "--jitter 0" to kvm.sh.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2016-06-14 16:03:32 -07:00
Paul E. McKenney
5ef20f872d rcutorture: Drop "-soundhw pcspkr" from x86 boot arguments
Because recent testing shows that "-soundhw pcspkr" is no longer required
in the kernel boot arguments, this commit drops this qemu argument.

Reported-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2016-06-14 16:03:30 -07:00
Boqun Feng
d5e953739c rcutorture: Don't specify the cpu type of QEMU on PPC
Do not restrict the cpu type to POWER7 for QEMU as we have POWER8 now.

Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2016-06-14 16:03:30 -07:00
Boqun Feng
1b2f48f29e rcutorture: Make -soundhw a x86 specific option
The option "-soundhw pcspk" gives me a error on PPC as follow:

qemu-system-ppc64: ISA bus not available for pcspk

This means this option doesn't work on ppc by default. So simply make
this an x86-specific option via identify_qemu_args().

Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2016-06-14 16:03:29 -07:00
Boqun Feng
1b900c6a26 rcutorture: Use vmlinux as the fallback kernel image
The vmlinux image is available for all the architectures, and suitable
for running a KVM guest by QEMU, besides, we used to copy the vmlinux
to $resdir anyway. Therefore it makes sense to use it as the fallback
kernel image for rcutorture KVM tests.

This patch makes identify_boot_image() return vmlinux if
${TORTURE_BOOT_IMAGE} is not set on non-x86 architectures, also fixes
several places that hard-code "bzImage" as $KERNEL.

This also fixes a problem that PPC doesn't have a bzImage file as build
results.

Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2016-06-14 16:03:29 -07:00
Paul E. McKenney
682ed706c5 torture: Add starvation events to error summary
This commit adds a string of the form "Starves: 10" to the summary
line for error conditions found in the console output.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2016-06-14 16:02:17 -07:00
Paul E. McKenney
6e8c66c867 torture: Forgive lengthy trace dumps and preemption
This commit avoids killing qemu if a trace dump is making progress
or if console log output is continuing and the console log timestamp
does not exceed the total plus grace period.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2016-06-14 16:02:16 -07:00
Paul E. McKenney
acc1adf557 rcutorture: Don't rebuild identical kernel
Currently, if the user specifies multiple runs of a given test
configuration, the scripting does multiple kernel builds.  This wastes
both time and disk space, so this commit makes the scripting use the
first build for all runs of a given test configuration.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2016-04-21 13:47:04 -07:00
Paul E. McKenney
6e524a603f rcutorture: Add OS-jitter capability
This commit adds a --jitter OS-jitter capability to expose bugs based
on no-delay assumptions.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2016-04-21 13:45:35 -07:00
Paul E. McKenney
480b1eb659 rcutorture: Convert test duration to seconds early
This commit converts test duration from minutes to seconds early on
in order to prepare for upcoming OS-jitter-injection changes.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2016-03-31 13:39:53 -07:00
Paul E. McKenney
fb2c66af10 torture: Kill qemu, not parent process
The current hang-check machinery in the rcutorture scripts uses "$!" of
a parenthesized bash statement to capture the pid.  Unfortunately, this
captures not qemu's pid, but rather that of its parent that implements
the parenthesized statement.  This commit therefore adjusts things so as
to capture qemu's actual pid, which then allows the script to actually
kill qemu in event of a kernel hang.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2016-03-31 13:39:53 -07:00
Paul E. McKenney
2b03d03845 rcutorture: Make scripts analyze rcuperf trace data, if present
The rcuperf event-trace data is more accurate than are the rcuperf
printk()s because locking keeps things ordered.  This commit therefore
parses and analyzes this event-trace data if present, and falls back on
the printk()s otherwise.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2016-03-31 13:38:57 -07:00
Paul E. McKenney
e588f35492 rcutorture: Print measure of batching efficiency
This commit adds a line giving the number of grace periods, the number
of batches, and the ratio.  The larger the ratio, the greater the
batching efficiency.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2016-03-31 13:37:40 -07:00
Paul E. McKenney
fd35be623a rcutorture: Update scripting to accommodate rcuperf
This commit adds the scripting changes to add support for the shiny
new rcuperf kernel module.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2016-03-31 13:37:36 -07:00
Paul E. McKenney
5d43edb407 rcutorture: Check for self-detected stalls
The current scripts parse console output only for cases where one CPU
detect a stall on some other CPU or task.  This commit therefore adds
checks for self-detected stalls.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2016-01-25 16:17:41 -08:00
Paul E. McKenney
fc91cbab11 rcutorture: Don't keep empty console.log.diags files
Currently, an error-free run produces an empty console.log.diags file.
This can be annoying when using "vi */console.log.diags" to see a full
summary of the errors.  This commit therefore removes any empty files
during the analysis process.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2016-01-25 16:17:41 -08:00
Paul E. McKenney
f5a5386bca rcutorture: Add checks for rcutorture writer starvation
This commit adds checks for rcutorture writer starvation, so that
instances will be added to the test summary.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2016-01-25 16:17:41 -08:00
Paul E. McKenney
c979ff9917 torture: Place console.log files correctly from the get-go
Currently, the console output files ("console.log") are placed in the
build directory initially, then copied to the results directory.
One problem with this is if a qemu refuses to die in a timely fashion
after a kernel hang, it will continue to write after the next qemu
starts up, resulting in confusing output from the old instance of
qemu.  This commit prevents such confusion by placing the console.log
files into the results directory to begin with, so that a given instance
of qemu is always writing only to its own console.log file.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
2015-12-05 17:58:34 -08:00
Paul E. McKenney
5708c64757 torture: Abbreviate console error dump
Currently, the scripts print a list of warning/bug indicators from the
console.log file.  This works well if there are only a few warnings or
bugs, but can be quite annoying if there is a large number.  This commit
therefore prints a summary listing the number of each type of warning/bug
indicator, but only if there is at least one such indicator.  The full
list is stored in the results directory at console.log.diags, which
makes it easier to find the warning/bugs in the full console.log.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
2015-12-05 17:58:31 -08:00
Paul E. McKenney
542e83329d rcutorture: Default grace period to three minutes, allow override
The default test grace period of two minutes is insufficient in some
cases and excessive in others.  This commit therefore increases the
default to three minutes, but also adds a --shutdown-grace parameter
to allow the default to be overridden.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
2015-12-05 17:58:12 -08:00
Paul E. McKenney
83977d273b rcutorture: Add batch number to script printout
Currently, the scripts print "----Start batch" at the beginning of each
batch, which does serve as a good visual delimiter between batches.
Unfortunately, if there are a lot of batches, it is hard to quickly
estimate test runtime from the output of "--dryrun sched".  This commit
therefore adds a batch number, so that the beginning-of-batch output
looks like this "----Start batch 10" for the tenth batch.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
2015-12-05 17:57:55 -08:00
Paul E. McKenney
a8c06024d0 torture: Forgive non-plural arguments
This commit allows --bootarg instead of --bootargs, --config instead of
--configs, and --qemu-arg instead of --qemu-args.  For those cases where
a native English speaker might auto-correct the argument to be incorrect.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
2015-10-06 11:28:26 -07:00
Paul E. McKenney
7d3bb54ade rcutorture: Allow repetition factors in Kconfig-fragment lists
Although it is currently possible to run the same test in parallel,
'--config "TINY01 TINY01 TINY01"' can get a bit verbose, especially
if you want to run 48 instances of TINY01 in parallel.  This commit
therefore allows prefixing the Kconfig fragment with a repeat count,
for example, '--config "48*TINY01"' to run 48 instances in parallel.
At least assuming that you have 48 CPUs and also gave '--cpus 48'.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
2015-05-27 13:00:00 -07:00
Paul E. McKenney
8ba8b664d4 rcutorture: Display "make oldconfig" errors
The current rcutorture scripting fails to dump out errors from
"make oldconfig", so this commit addresses this issue.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
2015-05-27 13:00:00 -07:00
Paul E. McKenney
91afa21d5d torture: Avoid script syntax error when insufficient CPUs
Parentheses are special to bash, so use an overflow flag that doesn't
use them.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2015-03-03 11:17:04 -08:00
Paul E. McKenney
78e691f4ae Merge branches 'doc.2015.01.07a', 'fixes.2015.01.15a', 'preempt.2015.01.06a', 'srcu.2015.01.06a', 'stall.2015.01.16a' and 'torture.2015.01.11a' into HEAD
doc.2015.01.07a: Documentation updates.
fixes.2015.01.15a: Miscellaneous fixes.
preempt.2015.01.06a: Changes to handling of lists of preempted tasks.
srcu.2015.01.06a: SRCU updates.
stall.2015.01.16a: RCU CPU stall-warning updates and fixes.
torture.2015.01.11a: RCU torture-test updates and fixes.
2015-01-15 23:34:34 -08:00
Paul E. McKenney
d2f74b5b48 torture: Flag console.log file to prevent holdovers from earlier runs
A system misconfiguration that prevents qemu from running at all (for
example, a missing dynamically linked library) will keep the console.log
file from the previous run.  This can fool the developer into thinking
that this failed run actually completed correctly.  This commit therefore
overwrites the console.log file just before launching qemu.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2015-01-10 19:08:05 -08:00
Paul E. McKenney
16c77ea7d0 torture: Add "-enable-kvm -soundhw pcspk" to qemu command line
More recent qemu implementations really want "-enable-kvm", and the
"-soundhw pcspk" makes the script a bit less dependent on odd audio
libraries being installed.  This commit therefore adds both to the
default qemu command line.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2015-01-10 19:08:04 -08:00
Paul E. McKenney
94162c8daa rcutorture: Handle different mpstat versions
The mpstat command recently added the %gnice column, which messes up
the cpu2use.sh script's idle-CPU calculations.  This commit therefore
uses $NF instead of $12 to select the last (%idle) column.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2015-01-10 19:08:03 -08:00
Paul E. McKenney
3b009c0ebe rcutorture: Make build-output parsing correctly flag RCU's warnings
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2015-01-10 19:07:57 -08:00
Paul E. McKenney
79619cf515 rcutorture: Issue warnings on close calls due to Reader Batch blows
Normal rcutorture checking overestimates grace periods somewhat due to
the fact that there is a delay from a grace-period request until the
start of the corresponding grace period and another delay from the end
of that grace period to notification of the requestor.  This means that
rcutorture's detection of RCU bugs is less sensitive than it might be.

It turns out that rcutorture also checks the underlying grace-period
"completed" counter (displayed in Reader Batch output), which in theory
allows rcutorture to do exact checks.  In practice, memory misordering
(by both compiler and CPU) can result in false positives.  However,
experience on x86 shows that these false positives are quite rare,
occurring less than one time per 1,000 hours of testing.  This commit
therefore does the exact checking, giving a warning if any Reader Batch
blows happen, and flagging an error if they happen more often than
once every three hours in long tests.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2015-01-10 19:07:46 -08:00
Paul E. McKenney
e9408e4f27 rcutorture: Add checks for stall ending before dump start
The current rcutorture scripting checks for actual stalls (via the "Call
Trace:" check), but fails to spot the case where a stall ends just as it
is being detected.  This commit therefore adds a check for this case.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2015-01-06 11:05:24 -08:00
Pranith Kumar
edae018d95 rcutorture: Remove obsolete kversion param in kvm.sh
Now that we have removed configs based on kernel version, we can also remove the
kversion parameter in kvm.sh.

Signed-off-by: Pranith Kumar <bobby.prani@gmail.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2014-11-03 19:26:40 -08:00
Paul E. McKenney
2f3fd499df torture: Run Linux-kernel binary out of results directory
The rcutorture scripts create a qemu-cmd script containing the actual
qemu command.  However, this command references the build directory,
which will be overwritten by later builds.  This commit therefore runs
the kernel out of the results directory so that less hand-editing is
required to re-run a previous test.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Pranith Kumar <bobby.prani@gmail.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
2014-11-03 19:26:00 -08:00
Paul E. McKenney
bc51896da2 torture: Check for nul bytes in console output
When starting a new torture run while an old one is still running, both
qemu processes can be outputting to the same console.out file.  This can
cause quite a bit of confusion, so this commit checks for this situation,
which is normally indicated by nul bytes in the console output.  Yes,
if your new run uses up an exact number of blocks of the file, this
check will be ineffective, but the odds are not bad.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Pranith Kumar <bobby.prani@gmail.com>
2014-09-07 16:24:49 -07:00
Paul E. McKenney
b76592412a torture: Print PID in hung-kernel diagnostic message
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Pranith Kumar <bobby.prani@gmail.com>
2014-09-07 16:24:48 -07:00
Paul E. McKenney
ae867ff03d rcutorture: Specify MAXSMP=y for TREE01
Setting CONFIG_MAXSMP=y causes cpumasks to be moved offstack, which
introduces the possibility of NULL cpumask_var_t pointers.  This commit
therefore enables CONFIG_MAXSMP=y in TREE01 to increase test coverage.
However, because CONFIG_MAXSMP=y implies 8192 CPUs, we need to use
the maxcpus= boot parameter to limit the number of CPUs to something
reasonable, which in turn requires updating the scripts to handle this.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Pranith Kumar <bobby.prani@gmail.com>
2014-09-07 16:24:45 -07:00
Pranith Kumar
3327d924a7 rcutorture: Set executable bit and drop bash from Usage
This commit sets the executable bit on test scripts config2frag.sh
and kvm.sh.  Since #!/bin/bash is set in all the scripts, this commit
also drops it from all usage lines because the scripts can now all be
invoked directly.

Signed-off-by: Pranith Kumar <bobby.prani@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2014-09-07 16:24:38 -07:00
Pranith Kumar
1a5e31fbf9 rcutorture: Use bash shell for all the test scripts
Some of the scripts encode a default /bin/sh shell. On systems which use
dash as default shell, these scripts fail as they are bash scripts. I
encountered this while testing the sprintf() changes on a Debian system
where dash is the default shell.

This commit changes all such uses to use bash explicitly.

Signed-off-by: Pranith Kumar <bobby.prani@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2014-09-07 16:24:32 -07:00
Paul E. McKenney
9bee2c6fb4 torture: Clean up diagnostics from --buildonly runs
Currently the post-processing complains about the lack of rcutorture
output when --buildonly is set and also emits misleading messages about
kernels being started and finishing.  This commit suppresses these
complaints and messages.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2014-06-26 10:58:41 -07:00
Paul E. McKenney
57e60d0b9e torture: Enable versions without CFcommon to function correctly
The CFcommon file must now be present, which makes using the current
scripts against old kernel versions cumbersome.  This commit therefore
makes the CFcommon file be optional, so that old kernel versions can be
used with current torture scripts.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2014-06-26 10:58:40 -07:00
Paul E. McKenney
8be7f505f9 rcutorture: Note diffs from git commits
The current scripting only keeps track of the git SHA-1 of the current
HEAD.  This can cause confusion in cases where testing ran in a git
tree where changes had not yet been checked in.  This commit therefore
also records the output of "git diff HEAD" to provide the information
needed to reconstruct the source tree that was tested.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
2014-05-14 09:46:25 -07:00
Paul E. McKenney
0bca7c33ba torture: Use elapsed time to detect hangs
The kvm-test-1-run.sh currently counts "sleep 1" commands to detect
hangs.  This can fail spectacularly on busy systems, where "sleep 1"
might take far longer than one second to complete.  This commit
therefore changes hang detection to use elapsed time measurements.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
2014-05-14 09:46:18 -07:00
Paul E. McKenney
9eb97fe703 torture: Better summary diagnostics for build failures
The reaction of kvm-recheck.sh is obscure at best, and easy to miss
completely.  This commit therefore prints "BUG: Build failed" in the
summary at the end of a run.  This commit also adds the line of dashes
in cases where performance info is not available, and also avoids
printing nonsense diagnostics in cases where some of the normal test
output is not available.  In addition, this commit saves off the .config
file even when the build fails.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2014-05-14 09:46:15 -07:00
Paul E. McKenney
f189cc8c94 torture: Choose bzImage location based on architecture
Currently, the scripts hard-code arch/x86/boot/bzImage, which does not
work well for other architectures.  This commit therefore provides a
identify_boot_image function that selects the correct bzImage location
relative to the top of the Linux source tree.  This commit also adds a
--bootimage argument that allows selecting some other file, for example,
"vmlinux".

This change requires that the definition of the QEMU variable be
computed earlier in order to identify where to look for the boot image
when it comes time to copy it to the results directory.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
2014-05-14 09:46:04 -07:00
Paul E. McKenney
0618873116 torture: Permit multi-word qemu and boot arguments
This commit applies quotes to permit multi-word --qemu-args and
--bootargs arguments.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
2014-05-14 09:46:03 -07:00