To enable TDM mode, the current control flow limits the function
calling order should be 'set_tdm_slot->set_dai_fmt'. But not all
platform sound card like as simeple card to follow this design.
To bypass this limit, adjust the DAI format setting in runtime
'hw_param' callback.
Signed-off-by: ChiYuan Huang <cy_huang@richtek.com>
Link: https://msgid.link/r/c4c8df00d8d179b8b5b39a8521de3a85325c57e8.1703813842.git.cy_huang@richtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Move tas2563 from tas2562 driver to tas2781 driver to unbind tas2563 from
tas2562 driver code and bind it to tas2781 driver code, because tas2563
only work in bypass-DSP mode with tas2562 driver. In order to enable DSP
mode for tas2563, it has been moved to tas2781 driver. As to the hardware
part, such as register setting and DSP firmware, all these are stored in
the binary firmware. What tas2781 drivder does is to parse the firmware
and download it to the chip, then power on the chip. So, tas2781 driver
can be resued as tas2563 driver. Only attention will be paid to downloading
corresponding firmware.
Signed-off-by: Shenghao Ding <shenghao-ding@ti.com>
Link: https://msgid.link/r/20240104145721.1398-4-shenghao-ding@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Move tas2563 from tas2562 driver to tas2781 driver to unbind tas2563 from
tas2562 driver code and bind it to tas2781 driver code, because tas2563
only work in bypass-DSP mode with tas2562 driver. In order to enable DSP
mode for tas2563, it has been moved to tas2781 driver. As to the hardware
part, such as register setting and DSP firmware, all these are stored in
the binary firmware. What tas2781 drivder does is to parse the firmware
and download it to the chip, then power on the chip. So, tas2781 driver
can be resued as tas2563 driver. Only attention will be paid to
downloading corresponding firmware.
Signed-off-by: Shenghao Ding <shenghao-ding@ti.com>
Link: https://msgid.link/r/20240104145721.1398-2-shenghao-ding@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
I recently got a LibreTech Sapphire board for my CI and while
integrating it found and fixed some issues, including crashes for the
enum validation. There's also a couple of patches adding quirks for
another x86 laptop from Hans and an error handling fix for the Freescale
rpmsg driver.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmWVw4MACgkQJNaLcl1U
h9DUtwf+KWJ3vDz+6llOo2sok0teL3fkPBhgPzSsSo/pTX8SLNyFrLPf1HJSLdd9
Vzc8LUU+05TyklP3TemOh42J6RoQlVxuKq0Qnc3unHhrUpIDKUmC4TWraQkI3hUo
iy8/DmS3isNrAGfXflrKbx12HCFCBxNjpuskEC+FyXhxORopE5XyAKtVLxO/U1/M
PfF0H0VRmtc+dY0eG5VXsVJk/VulCRsg/5DauLtWsfvnZ6rEt4H2ffQJ41fedOlX
fSlUbOEju8P4MIklkXV/GmYhsrr8Yw+G3W83DDcoJ8OuBi41MCkIpIwtoJQJHDcL
4otewgc+Yd6KqxqYMgpBqYz1mlghZw==
=3Pvo
-----END PGP SIGNATURE-----
Merge tag 'asoc-fix-v6.7-rc8' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v6.7
I recently got a LibreTech Sapphire board for my CI and while
integrating it found and fixed some issues, including crashes for the
enum validation. There's also a couple of patches adding quirks for
another x86 laptop from Hans and an error handling fix for the Freescale
rpmsg driver.
When a control changes value the return value from _put() should be 1 so
we get events generated to userspace notifying applications of the change.
While the I2S mux gets this right the S/PDIF mux does not, fix the return
value.
Fixes: c8609f3870 ("ASoC: meson: add g12a tohdmitx control")
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20240103-meson-enum-val-v1-4-424af7a8fb91@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
When a control changes value the return value from _put() should be 1 so
we get events generated to userspace notifying applications of the change.
We are checking if there has been a change and exiting early if not but we
are not providing the correct return value in the latter case, fix this.
Fixes: af2618a2ee ("ASoC: meson: g12a: add internal DAC glue driver")
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20240103-meson-enum-val-v1-3-424af7a8fb91@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
When writing to an enum we need to verify that the value written is valid
for the enumeration, the helper function snd_soc_item_enum_to_val() doesn't
do it since it needs to return an unsigned (and in any case we'd need to
check the return value).
Fixes: c8609f3870 ("ASoC: meson: add g12a tohdmitx control")
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20240103-meson-enum-val-v1-2-424af7a8fb91@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
When writing to an enum we need to verify that the value written is valid
for the enumeration, the helper function snd_soc_item_enum_to_val() doesn't
do it since it needs to return an unsigned (and in any case we'd need to
check the return value).
Fixes: af2618a2ee ("ASoC: meson: g12a: add internal DAC glue driver")
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20240103-meson-enum-val-v1-1-424af7a8fb91@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The current code flow is:
1. snd_hdac_device_register()
2. set parameters needed by the hdac driver
3. request_codec_module()
the hdac driver is probed at this point
During boot the codec drivers are not loaded when the hdac device is
registered, it is going to be probed later when loading the codec module,
which point the parameters are set.
On module remove/insert
rmmod snd_sof_pci_intel_tgl
modprobe snd_sof_pci_intel_tgl
The codec module remains loaded and the driver will be probed when the
hdac device is created right away, before the parameters for the driver
has been configured:
1. snd_hdac_device_register()
the hdac driver is probed at this point
2. set parameters needed by the hdac driver
3. request_codec_module()
will be a NOP as the module is already loaded
Move the snd_hdac_device_register() later, to be done right before
requesting the codec module to make sure that the parameters are all set
before the device is created:
1. set parameters needed by the hdac driver
2. snd_hdac_device_register()
3. request_codec_module()
This way at the hdac driver probe all parameters will be set in all cases.
Link: https://github.com/thesofproject/linux/issues/4731
Fixes: a0575b4add ("ASoC: hdac_hda: Conditionally register dais for HDMI and Analog")
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20231207095425.19597-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/ZYvUIxtrqBQZbNlC@shine.dominikbrodowski.net
Link: https://bugzilla.kernel.org/show_bug.cgi?id=218304
Signed-off-by: Takashi Iwai <tiwai@suse.de>
When CONFIG_SPI is disabled, the driver produces unused-variable warning:
sound/pci/hda/cs35l41_hda_property.c: In function 'generic_dsd_config':
sound/pci/hda/cs35l41_hda_property.c:181:28: error: unused variable 'spi' [-Werror=unused-variable]
181 | struct spi_device *spi;
| ^~~
sound/pci/hda/cs35l41_hda_property.c:180:27: error: unused variable 'cs_gpiod' [-Werror=unused-variable]
180 | struct gpio_desc *cs_gpiod;
| ^~~~~~~~
Avoid these by turning the preprocessor contionals into equivalent C code,
which also helps readability.
Fixes: 916d051730 ("ALSA: hda: cs35l41: Only add SPI CS GPIO if SPI is enabled in kernel")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20240103102606.3742476-1-arnd@kernel.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The ac97_bus_type structure is no longer declared in this file:
sound/ac97/bus.c: In function 'ac97_codec_add':
sound/ac97/bus.c:112:27: error: 'ac97_bus_type' undeclared (first use in this function); did you mean 'bus_type'?
112 | codec->dev.bus = &ac97_bus_type;
| ^~~~~~~~~~~~~
| bus_type
sound/ac97/bus.c:112:27: note: each undeclared identifier is reported only once for each function it appears in
sound/ac97/bus.c: In function 'snd_ac97_codec_driver_register':
sound/ac97/bus.c:191:28: error: 'ac97_bus_type' undeclared (first use in this function); did you mean 'ac97_bus_reset'?
191 | drv->driver.bus = &ac97_bus_type;
Include the header that contains the declaration and make sure the definition
is const but not static.
Fixes: 66e82d2199 ("ALSA: mark all struct bus_type as const")
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20240103102544.3715055-1-arnd@kernel.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This adds overrides for a series of notebooks using a common config
taken from HP's proprietary Windows driver.
This has been tested on a HP 15-ey0xxxx device (subsystem 103C8A31)
together with another Realtek quirk and the calibration files from the
proprietary driver.
Signed-off-by: Lorenz Brun <lorenz@brun.one>
Cc: <stable@vger.kernel.org> # v6.7
Link: https://lore.kernel.org/r/20240102214821.3394810-1-lorenz@brun.one
Signed-off-by: Takashi Iwai <tiwai@suse.de>
There is a HP ZBook which using ALC236 codec and need the
ALC236_FIXUP_HP_MUTE_LED_MICMUTE_VREF quirk to make mute LED
and micmute LED work.
[ confirmed that the new entries are for new models that have no
proper name, so the strings are left as "HP" which will be updated
eventually later -- tiwai ]
Signed-off-by: Andy Chi <andy.chi@canonical.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20240102024916.19093-1-andy.chi@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add driver properties on 4 models of this laptop serie since they don't
have _DSD in the ACPI table
Signed-off-by: Dorian Cruveiller <doriancruveiller@gmail.com>
Cc: <stable@vger.kernel.org> # v6.7
Link: https://lore.kernel.org/r/20231230114312.22118-1-doriancruveiller@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The HP Pavilion 14 ec1xxx series uses the HP mainboard 8A0F with the
ALC287 codec.
The mute led can be enabled using the already existing
ALC287_FIXUP_HP_GPIO_LED quirk.
Tested on an HP Pavilion ec1003AU
Signed-off-by: Aabish Malik <aabishmalik3337@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20231229170352.742261-3-aabishmalik3337@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Now that the driver core can properly handle constant struct bus_type,
move all of the sound subsystem struct bus_type structures as const,
placing them into read-only memory which can not be modified at runtime.
Note, this fixes a duplicate definition of ac97_bus_type, which somehow
was declared extern in a .h file, and then static as a prototype in a .c
file, and then properly later on in the same .c file. Amazing that no
compiler warning ever showed up for this.
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.com>
Cc: Dawei Li <set_pte_at@outlook.com>
Cc: Yu Liao <liaoyu15@huawei.com>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: linux-sound@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/2023121945-immersion-budget-d0aa@gregkh
Signed-off-by: Takashi Iwai <tiwai@suse.de>
AUD_PAD_TOP widget's correct register is AFE_AUD_PAD_TOP , and not zero.
Having a zero as register, it would mean that the `snd_soc_dapm_new_widgets`
would try to read the register at offset zero when trying to get the power
status of this widget, which is incorrect.
Fixes: b65c466220 ("ASoC: mediatek: mt8186: support adda in platform driver")
Signed-off-by: Eugen Hristev <eugen.hristev@collabora.com>
Link: https://lore.kernel.org/r/20231229114342.195867-1-eugen.hristev@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When the Direct button on the Solo Gen 4 is held for 3 seconds, the
PCM 1 and 2 inputs are toggled between DSP Outputs 1 and 2, and Mixer
Outputs E and F. This patch adds the corresponding ALSA control.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/8c67c6131c459588ac4edab11e1fbc40a8297328.1703612638.git.g@b4.vu
The Scarlett 4i4 Gen 4 adds a R/O headphone volume control in addition
to a R/O master volume control (which is already supported).
Mark the new scarlett2_notify_volume() function with __always_unused
until it gets used when the Gen 4 notification callback function arrays
are added.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/bd4a76da157f8cc3fbfa02eba96d02bdb86817c5.1703612638.git.g@b4.vu
Early firmware for the Scarlett Gen 4 devices has sufficient
differences that it is better to enforce a minimum firmware version
than to try and work around those differences. Add a minimum firmware
version field to the device info struct, and display a message if the
firmware version is too old. Only create the Firmware Version and MSD
(optional) controls in this case.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/5455a7e54bda81556066abd7f761b10e9c5f8a16.1703612638.git.g@b4.vu
The DSP mux channels are of type SCARLETT2_PORT_TYPE_MIX so the
ALSA controls would refer to them "Mix X" and "Mixer Input X". This
patch fixes them to be called "DSP X" and "DSP Input X".
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/2d91d0a74d5c7f6179e950bed2c80a4498d16649.1703612638.git.g@b4.vu
The DSP mux channels in the Scarlett 4th Gen appear as
SCARLETT2_PORT_TYPE_MIX ports but do not have corresponding mixer
controls. Add a dsp_count option to the device info struct to exclude
those DSP channels from the num_mix_in/num_mix_out counts.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/b78bdb1a7624d55783f5bf0e1ffbfa47a9e9a800.1703612638.git.g@b4.vu
The mixes used by Direct Monitor feature on the Scarlett 4th Gen Solo
and 2i2 interfaces are configurable. This patch adds ALSA controls for
the gains which are copied to the mixer when Direct Monitor is
enabled.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/96282a805b45f04560e5923d170745363906b7f3.1703612638.git.g@b4.vu
When the Direct Monitor feature on the Scarlett 4th Gen Solo and 2i2
interfaces is used, the Mix A and B gains are updated by the
interface. This patch calls snd_ctl_notify() for the ALSA mix controls
when a Direct Monitor notification is received.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/713d032e343e0547212368919bef17d6fa1c9d29.1703612638.git.g@b4.vu
The Scarlett 4th Gen small interfaces have a software-controllable
mixer like the large 2nd and 3rd Gen interfaces do. Pressing the
"Direct" button on the interface updates the mixer controls, which
this driver hasn't needed to deal with previously.
This commit stores the ALSA mixer controls, and adds a mix_updated
flag so that the controls can be updated when a notification is
received.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/3ba27c60230511b80b0fa75727551ea70f17d829.1703612638.git.g@b4.vu
Add a control to retrieve the power status from the interface
(bus-powered, external-powered, or insufficient power).
Mark the new scarlett2_notify_power_status() function with
__always_unused until it gets used when the Gen 4 notification
callback function arrays are added.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/d9806bc41adc45b1c19749562fec7765ba24351d.1703612638.git.g@b4.vu
When phantom power is enabled or disabled, the autogain control cannot
be enabled until the interface has signalled that the change is
complete and the input is unmuted. Update those controls to be
read-only during this time.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/f49f7bf9358e1f20713d95d407d8d6a436859877.1703612638.git.g@b4.vu
While the autogain function is running, the other input controls
(select, link, gain, safe, level, air, and phantom) can't be modified.
Update those controls to be read-only during this time.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/ad13bacae77860de8c2d7c89f6ec2a1ee104e65f.1703612638.git.g@b4.vu
Some devices in the Scarlett Gen 4 series have support for
software-controllable input gain. Along with this comes a channel
select option, an auto-gain feature, "safe" mode, and linking two
channels into a stereo pair.
Mark the new scarlett2_notify_input_*() functions with __always_unused
until they get used when the Gen 4 notification callback function
arrays are added.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/fc39e80bb39863dd1579d342097203942b4f3034.1703612638.git.g@b4.vu
Gen 2/3 interfaces would only use 0/1 values for input level and
phantom power switch controls. Gen 4 interfaces use the second bit to
indicate that the state should be changed (or is changing), and the
input is to be muted (or is muted) while that happens.
Add a "mute" flag to config items to enable this behaviour for the
level/phantom controls.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/f603cd16079c97fad910087e0302828a289d1c15.1703612638.git.g@b4.vu
Writing Scarlett Gen 4 parameters differs from Gen 2 and Gen 3:
- the values are written into a shared write location
- the values are only byte-sized
- the read locations now extend beyond 0xFF
- a separate NVRAM save step is no longer required
This patch implements that alternate write style, triggered by setting
the config item size field to zero.
The write address is specified through a new config set field
gen4_write_addr.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/1624e6d8a0c629c3bdfe53825b16e8b589724fc4.1703612638.git.g@b4.vu
The Focusrite Scarlett Gen 4 Solo has Air and Phantom Power controls
on analogue input #2 (the Gen 3 Solo had these controls on analogue
input #1). Add air_input_first and phantom_first device info options
to cater for this.
These options are similar to the level_input_first option that was
added for the Gen 3 Solo, but these new options do not require
adjusting the index of the control.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/19511f18895b8c094985a4a5691fbc1dc028c108.1703612638.git.g@b4.vu
The notification value for monitor_other on the large interfaces is
the same as the notification value for direct_monitor on the 3rd Gen
small interfaces. Add a separate scarlett3a_notifications array and
split out the direct_monitor handling.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Link: https://lore.kernel.org/r/9b56a483e3e9c1447684f18239a88652c1f01445.1703444932.git.g@b4.vu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Gen 2/3 devices have a single notification value for "input other"
changes. Gen 4 has separate notification values for level, pad, air,
and phantom power changes. Therefore, split the input_other_updated
field and the scarlett2_update_input_other() function into the four
components so that they can be handled separately later.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Link: https://lore.kernel.org/r/a1a1d190659d56689792aa20ceeb53a6175171ad.1703444932.git.g@b4.vu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
db_scale_scarlett2_gain is the TLV for the output volume controls.
Gen 4 has software-controllable input gain controls, so rename this to
db_scale_scarlett2_volume so we can use that name for the inputs.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Link: https://lore.kernel.org/r/d544ec7cc5d5a849da104a5a78b17f61f50657c1.1703444932.git.g@b4.vu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Currently-supported interfaces with a mixer have per-channel volume
controls, but this changes in Gen 4. Add a check so that the Playback
Volume and associated controls don't get created unless the
SCARLETT2_CONFIG_LINE_OUT_VOLUME config item is present.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Link: https://lore.kernel.org/r/30f68cb311e27f2cc1351cb846218f7248a90263.1703444932.git.g@b4.vu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
By splitting config set gen2 into gen2a/b (for 6i6/18i8 vs 18i20), and
gen3b into gen3b/c (for 4i4/8i6 vs 18i8/18i20), we can use
scarlett2_has_config_item() instead of the per-device line_out_hw_vol.
As Gen 4 has a master volume control but no SW/HW switches, check for
both SCARLETT2_CONFIG_MASTER_VOLUME and SCARLETT2_CONFIG_SW_HW_SWITCH
as needed, even though for Gen 2 and Gen 3 the former implies the
latter.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Link: https://lore.kernel.org/r/307c4f8d6d2e034f3e386b51d72a39d77c8a9fce.1703444932.git.g@b4.vu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Scarlett Gen 2 and Gen 3 devices combine volume and dim/mute
notifications. The Scarlett 4i4 Gen 4 has volume change notification
but no dim/mute control so split dim_mute_update out from vol_update.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Link: https://lore.kernel.org/r/bf63f48bcc68ae739bd9948c8ee2f87ee7af22a2.1703444932.git.g@b4.vu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The struct scarlett2_usb_volume_status matched the config space layout
of a few volume controls that could be read together and were in fixed
locations between Gen 2 and Gen 3 devices.
Gen 4 devices have removed, moved, and new related controls, so this
needs to be cleaned up. By adding SCARLETT2_CONFIG_MASTER_VOLUME (the
only config item that didn't already have its own entry, because it is
read-only), we can remove:
- struct scarlett2_usb_volume_state,
- #define SCARLETT2_USB_VOLUME_STATUS_OFFSET, and
- scarlett2_usb_get_volume_status()
and replace with calls to scarlett2_usb_get_config().
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Link: https://lore.kernel.org/r/2ee88994857246bf89fab8e62ac279f3bcf96192.1703444932.git.g@b4.vu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The notification values were previously #define'd, and checked with a
series of if() statements calling functions. Replace with an array of
masks/callback function pointers, and a pointer to that array in the
scarlett2_config_set definitions.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Link: https://lore.kernel.org/r/0ee2a3786f9d30c89eeae59d7e933424e8f39162.1703444932.git.g@b4.vu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Replace array index into config sets with a pointer to a config set.
Copy the config_set pointer to the scarlett2_data struct.
This simplifies both the definition and use of the config sets.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Link: https://lore.kernel.org/r/61f69519fb6fbb677e066891a3a6771aeeec106d.1703444932.git.g@b4.vu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add struct scarlett2_config_set so that data which is common to all
devices in a config set can be stored there rather than in the
model-specific data.
Accordingly, rename scarlett2_config_items[] to
scarlett2_config_sets[].
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Link: https://lore.kernel.org/r/bfdb04cd6239af9a8c26a52da0537980f77c0437.1703444932.git.g@b4.vu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Currently the presence of a mixer is determined by checking if the
device uses the GEN_3A config set. Add scarlett2_has_mixer() function
which checks for the presence of mux_assignment entries instead.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Link: https://lore.kernel.org/r/ef6f4d360c2fe682ab65f83cccbe5be66ccc6296.1703444932.git.g@b4.vu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This commit removes the explicit integer assignments from the enums.
The actual values matter little, and not assigning explicit values
makes it easier to modify the longer lists in the future.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Link: https://lore.kernel.org/r/67f0f1bb8b90d7c76dfe7062d22d33bbde19cf93.1703444932.git.g@b4.vu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add ops.write to the hwdep interface. Once the upgrade firmware flash
segment has been erased, writes to the hwdep fd are permitted, and
translated to SCARLETT2_USB_WRITE_SEGMENT commands to the device.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Link: https://lore.kernel.org/r/ZY65S0ojShSNSeRQ@m.b4.vu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add ioctls:
- SCARLETT2_IOCTL_SELECT_FLASH_SEGMENT
- SCARLETT2_IOCTL_ERASE_FLASH_SEGMENT
- SCARLETT2_IOCTL_GET_ERASE_PROGRESS
The settings or the firmware flash segment can be selected and then
erased (asynchronous operation), and the erase progress can be
monitored.
If the erase progress is not monitored, then subsequent hwdep
operations will block until the erase is complete.
Once the erase is started, ALSA controls that communicate with the
device will all return -EBUSY, and the device must be rebooted.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Link: https://lore.kernel.org/r/227409adb672f174bf3db211e9bda016fb4646ea.1703001053.git.g@b4.vu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Call SCARLETT2_USB_INFO_FLASH and SCARLETT2_USB_INFO_SEGMENT to find
the App_Settings and App_Upgrade flash segment numbers, and store them
in the scarlett2_data struct. These will be used later to implement
reset to factory defaults and firmware upgrade functions.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Link: https://lore.kernel.org/r/70f0108a9cf99b69f7aa920c4bcdb0cf4bf3da98.1703001053.git.g@b4.vu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Ensure the value passed to scarlett2_mixer_ctl_put() is between 0 and
SCARLETT2_MIXER_MAX_VALUE so we don't attempt to access outside
scarlett2_mixer_values[].
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Fixes: 9e4d5c1be2 ("ALSA: usb-audio: Scarlett Gen 2 mixer interface")
Link: https://lore.kernel.org/r/3b19fb3da641b587749b85fe1daa1b4e696c0c1b.1703001053.git.g@b4.vu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The *_ctl_get() functions which call scarlett2_update_*() were not
checking the return value. Fix to check the return value and pass to
the caller.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Fixes: 9e4d5c1be2 ("ALSA: usb-audio: Scarlett Gen 2 mixer interface")
Link: https://lore.kernel.org/r/32a5fdc83b05fa74e0fcdd672fbf71d75c5f0a6d.1703001053.git.g@b4.vu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
scarlett2_usb_set_config() calls scarlett2_usb_get() but was not
checking the result. Return the error if it fails rather than
continuing with an invalid value.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Fixes: 9e15fae6c5 ("ALSA: usb-audio: scarlett2: Allow bit-level access to config")
Link: https://lore.kernel.org/r/def110c5c31dbdf0a7414d258838a0a31c0fab67.1703001053.git.g@b4.vu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
scarlett2_config_save() was ignoring the return value from
scarlett2_usb(). As this function is not called from user-space we
can't return the error, so call usb_audio_err() instead.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Fixes: 9e4d5c1be2 ("ALSA: usb-audio: Scarlett Gen 2 mixer interface")
Link: https://lore.kernel.org/r/bf0a15332d852d7825fa6da87d2a0d9c0b702053.1703001053.git.g@b4.vu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add missing conversion from little-endian data to CPU-endian in
scarlett2_usb_get_meter_levels().
Fixes: 3473185f31 ("ALSA: scarlett2: Remap Level Meter values")
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Link: https://lore.kernel.org/r/ZYsBIE3DSKdi4YC/@m.b4.vu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
These models use 2 or 4 CS35L41 amps with HDA using SPI and I2C.
Models use internal and external boost.
All models require DSD support to be added inside
cs35l41_hda_property.c
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Cc: <stable@vger.kernel.org> # v6.7+
Link: https://lore.kernel.org/r/20231221132518.3213-4-sbinding@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Some laptops without _DSD have the SPI speed set very low in the BIOS.
Since the SPI controller uses this speed as its max speed, the SPI
transactions are very slow. Firmware download writes to many registers,
and if the SPI speed is too slow, it can take a long time to download.
For this reason, disable firmware loading if the maximum SPI speed is
too low. Without Firmware, audio playback will work, but the volume
will be low to ensure safe operation of the CS35L41.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Cc: <stable@vger.kernel.org> # v6.7+
Link: https://lore.kernel.org/r/20231221132518.3213-3-sbinding@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
When compiling with gcc version 14.0.0 20231220 (experimental)
and W=1, I've noticed the following warning:
sound/core/seq/seq_memory.c: In function 'snd_seq_pool_init':
sound/core/seq/seq_memory.c:445:41: warning: 'kvmalloc_array' sizes specified with
'sizeof' in the earlier argument and not in the later argument [-Wcalloc-transposed-args]
445 | cellptr = kvmalloc_array(sizeof(struct snd_seq_event_cell), pool->size,
| ^~~~~~
Since 'n' and 'size' arguments of 'kvmalloc_array()' are multiplied
to calculate the final size, their actual order doesn't affect the
result and so this is not a bug. But it's still worth to fix it.
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Link: https://lore.kernel.org/r/20231221091605.14660-1-dmantipov@yandex.ru
Signed-off-by: Takashi Iwai <tiwai@suse.de>
There are two problems with using regcache in this module.
The amplifier has 3 addressing levels (BOOK, PAGE, REG). The firmware
contains blocks that must be written to BOOK 0x8C. The regcache doesn't
know anything about BOOK, so regcache_sync writes invalid values to the
actual BOOK.
The module handles 2 or more separate amplifiers. The amplifiers have
different register values, and the module uses only one regmap/regcache
for all the amplifiers. The regcache_sync only writes the last amplifier
used.
The module successfully restores all the written register values (RC
profile, program, configuration, calibration) without regcache.
Remove regcache functions and set regmap cache_type to REGCACHE_NONE.
Link: https://lore.kernel.org/r/21a183b5a08cb23b193af78d4b1114cc59419272.1701906455.git.soyer@irl.hu/
Fixes: 5be27f1e3e ("ALSA: hda/tas2781: Add tas2781 HDA driver")
Acked-by: Mark Brown <broonie@kernel.org>
CC: stable@vger.kernel.org
Signed-off-by: Gergo Koteles <soyer@irl.hu>
Link: https://lore.kernel.org/r/491aeed0e2eecc3b704ec856f815db21bad3ba0e.1703202126.git.soyer@irl.hu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The sof imx pcm device is a device which should support
double buffering.
Found this issue with pipewire. When there is no
SNDRV_PCM_INFO_BATCH flag in driver, the pipewire will
set headroom to be zero, and because sof pcm device
don't support residue report, when the latency setting
is small, the "delay" always larger than "target" in
alsa-pcm.c, that reading next period data is not
scheduled on time.
With SNDRV_PCM_INFO_BATCH flag in driver, the pipewire
will select a smaller period size for device, then
the task of reading next period data will be scheduled
on time.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://lore.kernel.org/r/1703669263-13832-1-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
There is error message when defer probe happens:
fsl_rpmsg rpmsg_audio: Unbalanced pm_runtime_enable!
Fix the error handler with pm_runtime_enable.
Fixes: b73d9e6225 ("ASoC: fsl_rpmsg: Add CPU DAI driver for audio base on rpmsg")
Signed-off-by: Chancel Liu <chancel.liu@nxp.com>
Acked-by: Shengjiu Wang <shengjiu.wang@gmail.com>
Link: https://lore.kernel.org/r/20231225080608.967953-1-chancel.liu@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Set the card.components string using the new rt5645_components() helper
which returns a components string based on the DMI quirks inside the
rt5645 codec driver.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://msgid.link/r/20231126214024.300505-8-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The GPD Win and Teclast X80 Pro both only have 1 speaker add information
about this to the components string.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://msgid.link/r/20231126214024.300505-7-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The rt5645 codec driver uses DMI quirks to configure the DMIC data-pins,
which means that it knows which DMIC interface is used on a specific
device.
ATM we duplicate this DMI matching inside the UCM profiles to select
the right DMIC interface. Add a rt5645_components() helper which the
machine-driver can use to set the components string of the card so
that UCM can get the info from the components string.
This way we only need to add new DMI quirks in one place.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://msgid.link/r/20231126214024.300505-6-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add a rt5645_get_pdata() helper function which retreives the platform-data
and overrides it with the quirks module parameter if that is set.
This is a preparation patch for adding the rt5645_components() function.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://msgid.link/r/20231126214024.300505-5-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
