The nouveau driver outputs full range RGB, but the AVI InfoFrame just says
'Default' instead of 'Full'.
Call drm_hdmi_avi_infoframe_quant_range to fill in the quantization field
of the AVI InfoFrame correctly. Now displays that advertise RGB Selectable
Quantization Range in their EDID will understand that full range is
transmitted by the HDMI output. This is consistent to how the Nvidia's
driver behaves.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reviewed-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/e9a4a58a-0500-50f6-58cc-938a253cedeb@xs4all.nl
nouveau_framebuffer_new() call drm_format_info_plane_width() to get a width
of plane, but width is not used then, so it's a useless function call here.
Signed-off-by: Luo Jiaxing <luojiaxing@huawei.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Link: https://gitlab.freedesktop.org/drm/nouveau/-/merge_requests/10
Fixes the following warning when using W=1 to build kernel:
drivers/gpu/drm/nouveau/dispnv50/disp.c: In function ‘nv50_mstm_cleanup’:
drivers/gpu/drm/nouveau/dispnv50/disp.c:1389:6: warning: variable ‘ret’ set but not used [-Wunused-but-set-variable]
1389 | int ret;
| ^~~
drivers/gpu/drm/nouveau/dispnv50/disp.c: In function ‘nv50_mstm_prepare’:
drivers/gpu/drm/nouveau/dispnv50/disp.c:1413:6: warning: variable ‘ret’ set but not used [-Wunused-but-set-variable]
1413 | int ret;
| ^~~
Signed-off-by: Luo Jiaxing <luojiaxing@huawei.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Link: https://gitlab.freedesktop.org/drm/nouveau/-/merge_requests/10
Fix the following sparse warning:
drivers/gpu/drm/nouveau/nvkm/engine/fifo/tu102.c:53:1: warning: symbol
'tu102_fifo_runlist' was not declared. Should it be static?
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Link: https://gitlab.freedesktop.org/drm/nouveau/-/merge_requests/10
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/nouveau/dispnv50/headc57d.c:173:1: warning: no previous prototype for ‘headc57d_olut’ [-Wmissing-prototypes]
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Lyude Paul <lyude@redhat.com>
Cc: dri-devel@lists.freedesktop.org
Cc: nouveau@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Link: https://gitlab.freedesktop.org/drm/nouveau/-/merge_requests/10
Following warning is found when using W=1 to build kernel:
In function ‘nvkm_udevice_info’,
inlined from ‘nvkm_udevice_mthd’ at drivers/gpu/drm/nouveau/nvkm/engine/device/user.c:195:10:
drivers/gpu/drm/nouveau/nvkm/engine/device/user.c:164:2: warning: ‘strncpy’ specified bound 16 equals destination size [-Wstringop-truncation]
164 | strncpy(args->v0.chip, device->chip->name, sizeof(args->v0.chip));
drivers/gpu/drm/nouveau/nvkm/engine/device/user.c:165:2: warning: ‘strncpy’ specified bound 64 equals destination size [-Wstringop-truncation]
165 | strncpy(args->v0.name, device->name, sizeof(args->v0.name));
The reason of this warning is strncpy() does not guarantee that the
destination buffer will be NUL terminated. If the length of source string
is bigger than number we set by third input parameter, only a part of
characters is copied to the destination, and no NUL-terminated string is
automatically added. There are some potential risks.
So use snprintf() to replace strncpy().
Signed-off-by: Luo Jiaxing <luojiaxing@huawei.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Link: https://gitlab.freedesktop.org/drm/nouveau/-/merge_requests/10
The struct is giant, and triggers an order-7 allocation (512K). There is
no reason for this to be kmalloc-type memory, so switch to vmalloc. This
should help loading nouveau on low-memory and/or long-running systems.
Reported-by: Nathan E. Egge <unlord@xiph.org>
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: stable@vger.kernel.org
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Link: https://gitlab.freedesktop.org/drm/nouveau/-/merge_requests/10
When it comes to gamma or degamma luts, nouveau will actually skip the
calculation of certain LUTs depending on the head and plane states. For
instance, when the head is disabled we don't perform any error checking on
the gamma LUT, and likewise if no planes are present and enabled in our
atomic state we will skip error checking the degamma LUT. This is a bit of
a problem though, since the per-head gamma and degamma props in DRM can be
changed even while a head is disabled - a situation which can be triggered
by the igt testcase mentioned down below.
Originally I thought this was a bit silly and was tempted to just fix the
igt test to only set gamma/degamma with the head enabled. After a bit of
thinking though I realized we should fix this in nouveau. This is because
if a program decides to set an invalid LUT for a head before enabling the
head, such a property change would succeed while also making it impossible
to turn the head back on until the LUT is removed or corrected - something
that could be painful for a user to figure out.
So, fix this checking both degamma and gamma LUTs unconditionally during
atomic checks. We start by calling nv50_head_atomic_check_lut() regardless
of whether the head is active or not in nv50_head_atomic_check(). Then we
move the ilut error checking into nv50_head_atomic_check_lut() and add a
per-head hook for it, primarily because as a per-CRTC property DRM we want
the LUT to be error checked by the head any time it's included in an atomic
state. Of course though, actual programming of the degamma lut to hardware
is still handled in each plane's atomic check and commit.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Testcase: igt/kms_color/pipe-invalid-*-lut-sizes
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Link: https://gitlab.freedesktop.org/drm/nouveau/-/merge_requests/10
Since this is used in the atomic check, we should use the right debug macro
for it.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Cc: Martin Peres <martin.peres@free.fr>
Cc: Jeremy Cline <jcline@redhat.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Link: https://gitlab.freedesktop.org/drm/nouveau/-/merge_requests/10
Found this while trying to make some changes to the kms_cursor_crc test.
curs507a_acquire checks that the width and height of the cursor framebuffer
are equal (asyw->image.{w,h}). This isn't entirely correct though, as the
height of the cursor can be larger than the size of the cursor, as long as
the width is the same as the cursor size and there's no framebuffer offset.
Note that I'm not entirely sure why this wasn't previously breaking
kms_cursor_crc tests - they all set up cursors with the height being one
pixel larger than the actual size of the cursor. But this seems to fix
things, and the code before was definitely incorrect - so it's not really
worth looking into further imho.
Changes since v1:
* Don't use crtc_w everywhere for determining cursor layout, just use fb
size again
* Change check so that we only check that the w/h of the cursor plane is
the same, the width of the scanout surface is the same as the framebuffer
width, and that there's no offset being used for the cursor surface.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Cc: Martin Peres <martin.peres@mupuf.org>
Cc: Jeremy Cline <jcline@redhat.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Link: https://gitlab.freedesktop.org/drm/nouveau/-/merge_requests/10
Fix the following sparse warning:
drivers/gpu/drm/nouveau/nvkm/core/client.c:64:1: warning: symbol 'nvkm_uclient_sclass' was not declared. Should it be static?
Signed-off-by: Zou Wei <zou_wei@huawei.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Link: https://gitlab.freedesktop.org/drm/nouveau/-/merge_requests/10
There have been reports of the WFI timing out on some boards, and a
patch was proposed to just remove it. This stuff is rather fragile,
and I believe the WFI might be needed with our FW prior to GM200.
However, we probably should not be touching PMU during init on GPUs
where we depend on NVIDIA FW, outside of limited circumstances, so
this should be a somewhat safer change that achieves the desired
result.
Reported-by: Diego Viola <diego.viola@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Link: https://gitlab.freedesktop.org/drm/nouveau/-/merge_requests/10
Noticed this while trying to figure out the bit that we need to set in
order to get cursor CRCs to come up correctly on volta+: we never actually
went and added these methods to gv100_disp_core_mthd_head in
drm/nouveau/nvkm/engine/disp/coregv100.c which means we don't trace their
values when disp tracing is enabled in nvkm. So, fix that.
Cc: Martin Peres <martin.peres@free.fr>
Cc: Jeremy Cline <jcline@redhat.com>
Cc: Simon Ser <contact@emersion.fr>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Link: https://gitlab.freedesktop.org/drm/nouveau/-/merge_requests/10
Something that didn't get noticed until I started running cursor tests:
we're accidentally disabling an option for CRC calculation that's enabled
by default: WidePipeCrc, which controls whether we use the full width of
the data in the display pipe in order calculate CRCs. Having this disabled
apparently causes frames with the cursor plane enabled to generate
different CRCs than frames without the cursor plane enabled, even if the
frames are pixel-equivalent.
So, let's make sure to enable this and fix a bunch of cursor related tests
in IGT.
v2:
* Nvidia added the specific bit we were using to fix this issues to
open-gpu-docs, so pull in the actual macro definitions for it
Cc: Martin Peres <martin.peres@free.fr>
Cc: Jeremy Cline <jcline@redhat.com>
Cc: Simon Ser <contact@emersion.fr>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Link: https://gitlab.freedesktop.org/drm/nouveau/-/merge_requests/10
Originally it was assumed based on Nvidia's open-gpu-docs and testing that
NVDisplay required that at least one wndw which belongs to a given head to
be used as the controlling channel
(NVC37D_HEAD_SET_CRC_CONTROL_CONTROLLING_CHANNEL) in order for CRC capture
to function. While this is the case on Volta, Turing actually adds the
ability to instead use the core channel as the controlling channel. For
Turing this is quite useful, as it means that we can always default to the
core channel as the controlling channel and we don't need to be concerned
about ensuring we have at least one wndw channel owned by a head with CRC
output enabled. While Volta lacks this ability, Volta conveniently also
lacks flexible wndw mapping - meaning that we can always rely on each head
having four wndw channels mapped to it regardless of the atomic state.
So, simply use the hard-coded wndw mappings we're guaranteed to have on
Volta as the controlling channel, and use the core channel as the
controlling channel for Turing+. As a result this also renders the plane
ownership logic in nv50_crc_atomic_check() unnessecary, which gives us one
less thing to implement when we get support for flexible wndw mapping. We
also can entirely drop the wndw parameter from our set_src callbacks, and
the atomic state.
v2 (Karol): put prackets around complex macro definition
removed spaces before :32 in structs
Cc: Martin Peres <martin.peres@free.fr>
Cc: Jeremy Cline <jcline@redhat.com>
Cc: Simon Ser <contact@emersion.fr>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Link: https://gitlab.freedesktop.org/drm/nouveau/-/merge_requests/10
While I haven't seen us take too long in nv50_crc_ctx_flip_work() outside
of users with kernel logging on a serial port, it probably would be a good
idea to check how long we take just in case we need to go faster in the
future.
Cc: Martin Peres <martin.peres@free.fr>
Cc: Jeremy Cline <jcline@redhat.com>
Cc: Simon Ser <contact@emersion.fr>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Link: https://gitlab.freedesktop.org/drm/nouveau/-/merge_requests/10
Cc: Martin Peres <martin.peres@free.fr>
Cc: Jeremy Cline <jcline@redhat.com>
Cc: Simon Ser <contact@emersion.fr>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Simon Ser <contact@emersion.fr>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Link: https://gitlab.freedesktop.org/drm/nouveau/-/merge_requests/10
Some side notes on this. Atm we do want to use gitlab for bug tracking and
merge requests. But due to the nature of the current linux kernel
development, we can only do so for nouveau internal changes.
Everything else still needs to be sent as emails and this is also includes
changes to UAPI etc.
Anyway, if somebody wants to submit patches via gitlab, they are free to
do so and this should just make this more official and documented.
People listed as maintainers are such that have push access to drm-misc
(where changes are pushed to after landing in gitlab) and are known
nouveau developers.
We did this already for some trivial changes and critical bug fixes
already, we just weren't thinking about updating the MAINTAINERS file.
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Lyude Paul <lyude@redhat.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Cc: nouveau@lists.freedesktop.org
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211110133157.553251-1-kherbst@redhat.com
Drop the local connector and move all callback to bridge funcs in order
to leverage the generic CVBS display connector.
This will also permit adding custom cvbs connectors for ADC based HPD
detection on some Amlogic SoC based boards.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
[narmstrong: fixed diplay typo in commit log]
Link: https://patchwork.freedesktop.org/patch/msgid/20211020123947.2585572-7-narmstrong@baylibre.com
This implements the necessary change to no more use the embedded
connector in dw-hdmi and use the dedicated bridge connector driver
by passing DRM_BRIDGE_ATTACH_NO_CONNECTOR to the bridge attach call.
The necessary connector properties are added to handle the same
functionalities as the embedded dw-hdmi connector, i.e. the HDR
metadata, the CEC notifier & other flags.
The dw-hdmi output_port is set to 1 in order to look for a connector
next bridge in order to get DRM_BRIDGE_ATTACH_NO_CONNECTOR working.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211020123947.2585572-5-narmstrong@baylibre.com
This moves all the non-DW-HDMI code where it should be:
an encoder in the drm/meson core driver.
The bridge functions are copied as-is, except:
- the encoder init uses the simple kms helper
- the mode_set has been moved to atomic_enable()
- debug prints are converted to dev_debg()
For now the bridge attach flags is 0, DRM_BRIDGE_ATTACH_NO_CONNECTOR
will be handled later.
The meson dw-hdmi glue is slightly fixed to live without the
encoder in the same driver.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
[narmstrong: fixed warning because missing meson_encoder_hdmi.h include]
Link: https://patchwork.freedesktop.org/patch/msgid/20211020123947.2585572-4-narmstrong@baylibre.com
The initial design was recursive to cover all port/endpoints, but only the first layer
of endpoints should be covered by the components list.
This also breaks the MIPI-DSI init/bridge attach sequence, thus only parse the
first endpoints instead of recursing.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211020123947.2585572-3-narmstrong@baylibre.com
Since this bridge is tied to the connector, it acts like a passthrough,
so concerning the output & input bus formats, either pass the bus formats from the
previous bridge or return fallback data like done in the bridge function:
drm_atomic_bridge_chain_select_bus_fmts() & select_bus_fmt_recursive.
This permits avoiding skipping the negociation if the remaining bridge chain has
all the bits in place.
Without this bus fmt negociation breaks on drm/meson HDMI pipeline when attaching
dw-hdmi with DRM_BRIDGE_ATTACH_NO_CONNECTOR, because the last bridge of the
display-connector doesn't implement buf fmt callbacks and MEDIA_BUS_FMT_FIXED
is used leading to select an unsupported default bus format from dw-hdmi.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20211020123947.2585572-2-narmstrong@baylibre.com
The current ELD handling takes the internal connector ELD buffer and
shares it to the I2S and AHB sub-driver.
But with DRM_BRIDGE_ATTACH_NO_CONNECTOR, the connector is created
elsewhere (or not), and an eventual connector is known only
if the bridge chain up to a connector is enabled.
The current dw-hdmi code gets the current connector from
atomic_enable() so use the already stored connector pointer and
replace the buffer pointer with a callback returning the current
connector ELD buffer.
Since a connector is not always available, either pass an empty
ELD to the alsa HDMI driver or don't call snd_pcm_hw_constraint_eld()
in AHB driver.
Reported-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
[narmstrong: fixed typo in commit log]
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211029135947.3022875-1-narmstrong@baylibre.com
Conventionally, panel is listed under the root of the device tree.
When userland asks for display mode, ps8640 bridge is responsible
for returning EDID when ps8640_bridge_get_edid() is called.
Now enable a new option of listing panel under "aux-bus" of ps8640
bridge node in the device tree. In this case, panel driver can retrieve
EDID by triggering AUX transactions, without ps8640_bridge_get_edid()
calls at all.
To prevent the "old" and "new" options from interfering with each
other's logic flow, disable DRM_BRIDGE_OP_EDID when the new option
is taken.
Signed-off-by: Philip Chen <philipchen@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20211028105754.v5.2.I09899dea340f11feab97d719cb4b62bef3179e4b@changeid
Fit ps8640 driver into runtime power management framework:
First, break _poweron() to 3 parts: (1) turn on power and wait for
ps8640's internal MCU to finish init (2) check panel HPD (which is
proxied by GPIO9) (3) the other configs. As runtime_resume() can be
called before panel is powered, we only add (1) to _resume() and leave
(2)(3) to _pre_enable(). We also add (2) to _aux_transfer() as we want
to ensure panel HPD is asserted before we start AUX CH transactions.
Second, the original driver has a mysterious delay of 50 ms between (2)
and (3). Since Parade's support can't explain what the delay is for,
and we don't see removing the delay break any boards at hand, remove
the delay to fit into this driver change.
In addition, rename "powered" to "pre_enabled" and don't check for it
in the pm_runtime calls. The pm_runtime calls are already refcounted
so there's no reason to check there. The other user of "powered",
_get_edid(), only cares if pre_enable() has already been called.
Lastly, change some existing DRM_...() logging to dev_...() along the
way, since DRM_...() seem to be deprecated in [1].
[1] https://patchwork.freedesktop.org/patch/454760/
Signed-off-by: Philip Chen <philipchen@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
[dianders: fixed whitespace warning reported by dim tool]
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20211028105754.v5.1.I828f5db745535fb7e36e8ffdd62d546f6d08b6d1@changeid
Add additional information on the semantics of the size fields in
struct drm_mode_config. Also add a TODO to review all driver for
correct usage of these fields.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20211110103702.374-10-tzimmermann@suse.de
Add constants for the maximum size of the shadow-plane surface
size. Useful for shadow planes with virtual screen sizes. The
current sizes are 4096 scanlines with 4096 pixels each. This
seems reasonable for current hardware, but can be increased as
necessary.
In simpledrm, set the maximum framebuffer size from the constants
for shadow planes. Implements support for virtual screen sizes and
page flipping on the fbdev console.
v3:
* use decimal numbers for shadow-plane constants (Noralf)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20211110103702.374-9-tzimmermann@suse.de
Enable the FB_DAMAGE_CLIPS property to reduce display-update
overhead. Also fixes a warning in the kernel log.
simple-framebuffer simple-framebuffer.0: [drm] drm_plane_enable_fb_damage_clips() not called
Fix the computation of the blit rectangle. This wasn't an issue so
far, as simpledrm always blitted the full framebuffer. The code now
supports damage clipping and virtual screen sizes.
v3:
* fix drm_dev_enter() error path (Noralf)
* remove unnecessary clipping from update function (Noralf)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20211110103702.374-8-tzimmermann@suse.de
Move destination-buffer clipping from format-helper blit function into
caller. Rename drm_fb_blit_rect_dstclip() to drm_fb_blit_toio(). Done for
consistency with the rest of the interface. Remove drm_fb_blit_dstclip(),
which isn't required.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20211110103702.374-6-tzimmermann@suse.de
Move destination-buffer clipping from all format-helper conversion
functions into callers. Support destination-buffer pitch. Only
distinguish between system and I/O memory, but use same logic
everywhere.
Simply harmonize the interface and semantics of the existing code.
Not all conversion helpers support all combinations of parameters.
We have to add additional features when we need them.
v2:
* fix default destination pitch in drm_fb_xrgb8888_to_gray8()
(Noralf)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Tested-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20211110103702.374-5-tzimmermann@suse.de
Add destination-buffer pitch as argument to drm_fb_swab(). Done for
consistency with the rest of the interface.
v2:
* update documentation (Noralf)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Tested-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20211110103702.374-4-tzimmermann@suse.de
Move destination-buffer clipping from all format-helper memcpy
function into callers. Support destination-buffer pitch. Only
distinguish between system and I/O memory, but use same logic
everywhere.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Tested-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20211110103702.374-3-tzimmermann@suse.de
Provide a function that computes the offset into a blit destination
buffer. This will allow to move destination-buffer clipping into the
format-helper callers.
v4:
* add missing '@' for parameter documentation
* fix typo 'frambuffer'
v2:
* provide documentation (Sam)
* return 'unsigned int' (Sam, Noralf)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20211110103702.374-2-tzimmermann@suse.de
Moving the driver-specific mmap code into a GEM object function allows
for using DRM helpers for various mmap callbacks.
The respective xen functions are being removed. The file_operations
structure fops is now being created by the helper macro
DEFINE_DRM_GEM_FOPS().
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211108102846.309-3-tzimmermann@suse.de
Use the helper macro SET_RUNTIME_PM_OPS() instead of the verbose
operators ".runtime_suspend/.runtime_resume", because the
SET_RUNTIME_PM_OPS() is a nice helper macro that could be brought
in to make code a little more concise.
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210907033526.1612-1-caihuoqing@baidu.com
DSS5's maximum tv pclk rate (i.e. HDMI) is set to 186MHz, which comes
from the TRM (DPLL_HDMI_CLK1 frequency must be lower than 186 MHz). To
support DRA76's wide screen HDMI feature, we need to increase this
maximum rate.
Testing shows that the PLL seems to work fine even with ~240MHz clocks,
and even the HDMI output at that clock is stable enough for monitors to
show a picture. This holds true for all DRA7 and AM5 SoCs (and probably
also for OMAP5).
However, the highest we can go without big refactoring to the clocking
code is 192MHz, as that is the DSS func clock we get from the PRCM. So,
increase the max HDMI pixel clock to 192MHz for now, to allow some more
2k+ modes to work.
This patch never had a clear confirmation from HW people, but this
change stayed on production trees for multiple years without any report
on an eventual breakage.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211012133939.2145462-1-narmstrong@baylibre.com
Use the devm_platform_ioremap_resource_byname() helper instead of
calling platform_get_resource_byname() and devm_ioremap_resource()
separately
Use the devm_platform_ioremap_resource() helper instead of
calling platform_get_resource() and devm_ioremap_resource()
separately
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210831135707.4676-1-caihuoqing@baidu.com
Use the helper macro SET_RUNTIME_PM_OPS() instead of the verbose
operators ".runtime_suspend/.runtime_resume", because the
SET_RUNTIME_PM_OPS() is a nice helper macro that could be brought
in to make code a little clearer, a little more concise.
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210828084811.104-1-caihuoqing@baidu.com
