Core
----
- Rework the sendpage & splice implementations. Instead of feeding
data into sockets page by page extend sendmsg handlers to support
taking a reference on the data, controlled by a new flag called
MSG_SPLICE_PAGES. Rework the handling of unexpected-end-of-file
to invoke an additional callback instead of trying to predict what
the right combination of MORE/NOTLAST flags is.
Remove the MSG_SENDPAGE_NOTLAST flag completely.
- Implement SCM_PIDFD, a new type of CMSG type analogous to
SCM_CREDENTIALS, but it contains pidfd instead of plain pid.
- Enable socket busy polling with CONFIG_RT.
- Improve reliability and efficiency of reporting for ref_tracker.
- Auto-generate a user space C library for various Netlink families.
Protocols
---------
- Allow TCP to shrink the advertised window when necessary, prevent
sk_rcvbuf auto-tuning from growing the window all the way up to
tcp_rmem[2].
- Use per-VMA locking for "page-flipping" TCP receive zerocopy.
- Prepare TCP for device-to-device data transfers, by making sure
that payloads are always attached to skbs as page frags.
- Make the backoff time for the first N TCP SYN retransmissions
linear. Exponential backoff is unnecessarily conservative.
- Create a new MPTCP getsockopt to retrieve all info (MPTCP_FULL_INFO).
- Avoid waking up applications using TLS sockets until we have
a full record.
- Allow using kernel memory for protocol ioctl callbacks, paving
the way to issuing ioctls over io_uring.
- Add nolocalbypass option to VxLAN, forcing packets to be fully
encapsulated even if they are destined for a local IP address.
- Make TCPv4 use consistent hash in TIME_WAIT and SYN_RECV. Ensure
in-kernel ECMP implementation (e.g. Open vSwitch) select the same
link for all packets. Support L4 symmetric hashing in Open vSwitch.
- PPPoE: make number of hash bits configurable.
- Allow DNS to be overwritten by DHCPACK in the in-kernel DHCP client
(ipconfig).
- Add layer 2 miss indication and filtering, allowing higher layers
(e.g. ACL filters) to make forwarding decisions based on whether
packet matched forwarding state in lower devices (bridge).
- Support matching on Connectivity Fault Management (CFM) packets.
- Hide the "link becomes ready" IPv6 messages by demoting their
printk level to debug.
- HSR: don't enable promiscuous mode if device offloads the proto.
- Support active scanning in IEEE 802.15.4.
- Continue work on Multi-Link Operation for WiFi 7.
BPF
---
- Add precision propagation for subprogs and callbacks. This allows
maintaining verification efficiency when subprograms are used,
or in fact passing the verifier at all for complex programs,
especially those using open-coded iterators.
- Improve BPF's {g,s}setsockopt() length handling. Previously BPF
assumed the length is always equal to the amount of written data.
But some protos allow passing a NULL buffer to discover what
the output buffer *should* be, without writing anything.
- Accept dynptr memory as memory arguments passed to helpers.
- Add routing table ID to bpf_fib_lookup BPF helper.
- Support O_PATH FDs in BPF_OBJ_PIN and BPF_OBJ_GET commands.
- Drop bpf_capable() check in BPF_MAP_FREEZE command (used to mark
maps as read-only).
- Show target_{obj,btf}_id in tracing link fdinfo.
- Addition of several new kfuncs (most of the names are self-explanatory):
- Add a set of new dynptr kfuncs: bpf_dynptr_adjust(),
bpf_dynptr_is_null(), bpf_dynptr_is_rdonly(), bpf_dynptr_size()
and bpf_dynptr_clone().
- bpf_task_under_cgroup()
- bpf_sock_destroy() - force closing sockets
- bpf_cpumask_first_and(), rework bpf_cpumask_any*() kfuncs
Netfilter
---------
- Relax set/map validation checks in nf_tables. Allow checking
presence of an entry in a map without using the value.
- Increase ip_vs_conn_tab_bits range for 64BIT builds.
- Allow updating size of a set.
- Improve NAT tuple selection when connection is closing.
Driver API
----------
- Integrate netdev with LED subsystem, to allow configuring HW
"offloaded" blinking of LEDs based on link state and activity
(i.e. packets coming in and out).
- Support configuring rate selection pins of SFP modules.
- Factor Clause 73 auto-negotiation code out of the drivers, provide
common helper routines.
- Add more fool-proof helpers for managing lifetime of MDIO devices
associated with the PCS layer.
- Allow drivers to report advanced statistics related to Time Aware
scheduler offload (taprio).
- Allow opting out of VF statistics in link dump, to allow more VFs
to fit into the message.
- Split devlink instance and devlink port operations.
New hardware / drivers
----------------------
- Ethernet:
- Synopsys EMAC4 IP support (stmmac)
- Marvell 88E6361 8 port (5x1GE + 3x2.5GE) switches
- Marvell 88E6250 7 port switches
- Microchip LAN8650/1 Rev.B0 PHYs
- MediaTek MT7981/MT7988 built-in 1GE PHY driver
- WiFi:
- Realtek RTL8192FU, 2.4 GHz, b/g/n mode, 2T2R, 300 Mbps
- Realtek RTL8723DS (SDIO variant)
- Realtek RTL8851BE
- CAN:
- Fintek F81604
Drivers
-------
- Ethernet NICs:
- Intel (100G, ice):
- support dynamic interrupt allocation
- use meta data match instead of VF MAC addr on slow-path
- nVidia/Mellanox:
- extend link aggregation to handle 4, rather than just 2 ports
- spawn sub-functions without any features by default
- OcteonTX2:
- support HTB (Tx scheduling/QoS) offload
- make RSS hash generation configurable
- support selecting Rx queue using TC filters
- Wangxun (ngbe/txgbe):
- add basic Tx/Rx packet offloads
- add phylink support (SFP/PCS control)
- Freescale/NXP (enetc):
- report TAPRIO packet statistics
- Solarflare/AMD:
- support matching on IP ToS and UDP source port of outer header
- VxLAN and GENEVE tunnel encapsulation over IPv4 or IPv6
- add devlink dev info support for EF10
- Virtual NICs:
- Microsoft vNIC:
- size the Rx indirection table based on requested configuration
- support VLAN tagging
- Amazon vNIC:
- try to reuse Rx buffers if not fully consumed, useful for ARM
servers running with 16kB pages
- Google vNIC:
- support TCP segmentation of >64kB frames
- Ethernet embedded switches:
- Marvell (mv88e6xxx):
- enable USXGMII (88E6191X)
- Microchip:
- lan966x: add support for Egress Stage 0 ACL engine
- lan966x: support mapping packet priority to internal switch
priority (based on PCP or DSCP)
- Ethernet PHYs:
- Broadcom PHYs:
- support for Wake-on-LAN for BCM54210E/B50212E
- report LPI counter
- Microsemi PHYs: support RGMII delay configuration (VSC85xx)
- Micrel PHYs: receive timestamp in the frame (LAN8841)
- Realtek PHYs: support optional external PHY clock
- Altera TSE PCS: merge the driver into Lynx PCS which it is
a variant of
- CAN: Kvaser PCIEcan:
- support packet timestamping
- WiFi:
- Intel (iwlwifi):
- major update for new firmware and Multi-Link Operation (MLO)
- configuration rework to drop test devices and split
the different families
- support for segmented PNVM images and power tables
- new vendor entries for PPAG (platform antenna gain) feature
- Qualcomm 802.11ax (ath11k):
- Multiple Basic Service Set Identifier (MBSSID) and
Enhanced MBSSID Advertisement (EMA) support in AP mode
- support factory test mode
- RealTek (rtw89):
- add RSSI based antenna diversity
- support U-NII-4 channels on 5 GHz band
- RealTek (rtl8xxxu):
- AP mode support for 8188f
- support USB RX aggregation for the newer chips
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=9i4I
-----END PGP SIGNATURE-----
Merge tag 'net-next-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking changes from Jakub Kicinski:
"WiFi 7 and sendpage changes are the biggest pieces of work for this
release. The latter will definitely require fixes but I think that we
got it to a reasonable point.
Core:
- Rework the sendpage & splice implementations
Instead of feeding data into sockets page by page extend sendmsg
handlers to support taking a reference on the data, controlled by a
new flag called MSG_SPLICE_PAGES
Rework the handling of unexpected-end-of-file to invoke an
additional callback instead of trying to predict what the right
combination of MORE/NOTLAST flags is
Remove the MSG_SENDPAGE_NOTLAST flag completely
- Implement SCM_PIDFD, a new type of CMSG type analogous to
SCM_CREDENTIALS, but it contains pidfd instead of plain pid
- Enable socket busy polling with CONFIG_RT
- Improve reliability and efficiency of reporting for ref_tracker
- Auto-generate a user space C library for various Netlink families
Protocols:
- Allow TCP to shrink the advertised window when necessary, prevent
sk_rcvbuf auto-tuning from growing the window all the way up to
tcp_rmem[2]
- Use per-VMA locking for "page-flipping" TCP receive zerocopy
- Prepare TCP for device-to-device data transfers, by making sure
that payloads are always attached to skbs as page frags
- Make the backoff time for the first N TCP SYN retransmissions
linear. Exponential backoff is unnecessarily conservative
- Create a new MPTCP getsockopt to retrieve all info
(MPTCP_FULL_INFO)
- Avoid waking up applications using TLS sockets until we have a full
record
- Allow using kernel memory for protocol ioctl callbacks, paving the
way to issuing ioctls over io_uring
- Add nolocalbypass option to VxLAN, forcing packets to be fully
encapsulated even if they are destined for a local IP address
- Make TCPv4 use consistent hash in TIME_WAIT and SYN_RECV. Ensure
in-kernel ECMP implementation (e.g. Open vSwitch) select the same
link for all packets. Support L4 symmetric hashing in Open vSwitch
- PPPoE: make number of hash bits configurable
- Allow DNS to be overwritten by DHCPACK in the in-kernel DHCP client
(ipconfig)
- Add layer 2 miss indication and filtering, allowing higher layers
(e.g. ACL filters) to make forwarding decisions based on whether
packet matched forwarding state in lower devices (bridge)
- Support matching on Connectivity Fault Management (CFM) packets
- Hide the "link becomes ready" IPv6 messages by demoting their
printk level to debug
- HSR: don't enable promiscuous mode if device offloads the proto
- Support active scanning in IEEE 802.15.4
- Continue work on Multi-Link Operation for WiFi 7
BPF:
- Add precision propagation for subprogs and callbacks. This allows
maintaining verification efficiency when subprograms are used, or
in fact passing the verifier at all for complex programs,
especially those using open-coded iterators
- Improve BPF's {g,s}setsockopt() length handling. Previously BPF
assumed the length is always equal to the amount of written data.
But some protos allow passing a NULL buffer to discover what the
output buffer *should* be, without writing anything
- Accept dynptr memory as memory arguments passed to helpers
- Add routing table ID to bpf_fib_lookup BPF helper
- Support O_PATH FDs in BPF_OBJ_PIN and BPF_OBJ_GET commands
- Drop bpf_capable() check in BPF_MAP_FREEZE command (used to mark
maps as read-only)
- Show target_{obj,btf}_id in tracing link fdinfo
- Addition of several new kfuncs (most of the names are
self-explanatory):
- Add a set of new dynptr kfuncs: bpf_dynptr_adjust(),
bpf_dynptr_is_null(), bpf_dynptr_is_rdonly(), bpf_dynptr_size()
and bpf_dynptr_clone().
- bpf_task_under_cgroup()
- bpf_sock_destroy() - force closing sockets
- bpf_cpumask_first_and(), rework bpf_cpumask_any*() kfuncs
Netfilter:
- Relax set/map validation checks in nf_tables. Allow checking
presence of an entry in a map without using the value
- Increase ip_vs_conn_tab_bits range for 64BIT builds
- Allow updating size of a set
- Improve NAT tuple selection when connection is closing
Driver API:
- Integrate netdev with LED subsystem, to allow configuring HW
"offloaded" blinking of LEDs based on link state and activity
(i.e. packets coming in and out)
- Support configuring rate selection pins of SFP modules
- Factor Clause 73 auto-negotiation code out of the drivers, provide
common helper routines
- Add more fool-proof helpers for managing lifetime of MDIO devices
associated with the PCS layer
- Allow drivers to report advanced statistics related to Time Aware
scheduler offload (taprio)
- Allow opting out of VF statistics in link dump, to allow more VFs
to fit into the message
- Split devlink instance and devlink port operations
New hardware / drivers:
- Ethernet:
- Synopsys EMAC4 IP support (stmmac)
- Marvell 88E6361 8 port (5x1GE + 3x2.5GE) switches
- Marvell 88E6250 7 port switches
- Microchip LAN8650/1 Rev.B0 PHYs
- MediaTek MT7981/MT7988 built-in 1GE PHY driver
- WiFi:
- Realtek RTL8192FU, 2.4 GHz, b/g/n mode, 2T2R, 300 Mbps
- Realtek RTL8723DS (SDIO variant)
- Realtek RTL8851BE
- CAN:
- Fintek F81604
Drivers:
- Ethernet NICs:
- Intel (100G, ice):
- support dynamic interrupt allocation
- use meta data match instead of VF MAC addr on slow-path
- nVidia/Mellanox:
- extend link aggregation to handle 4, rather than just 2 ports
- spawn sub-functions without any features by default
- OcteonTX2:
- support HTB (Tx scheduling/QoS) offload
- make RSS hash generation configurable
- support selecting Rx queue using TC filters
- Wangxun (ngbe/txgbe):
- add basic Tx/Rx packet offloads
- add phylink support (SFP/PCS control)
- Freescale/NXP (enetc):
- report TAPRIO packet statistics
- Solarflare/AMD:
- support matching on IP ToS and UDP source port of outer
header
- VxLAN and GENEVE tunnel encapsulation over IPv4 or IPv6
- add devlink dev info support for EF10
- Virtual NICs:
- Microsoft vNIC:
- size the Rx indirection table based on requested
configuration
- support VLAN tagging
- Amazon vNIC:
- try to reuse Rx buffers if not fully consumed, useful for ARM
servers running with 16kB pages
- Google vNIC:
- support TCP segmentation of >64kB frames
- Ethernet embedded switches:
- Marvell (mv88e6xxx):
- enable USXGMII (88E6191X)
- Microchip:
- lan966x: add support for Egress Stage 0 ACL engine
- lan966x: support mapping packet priority to internal switch
priority (based on PCP or DSCP)
- Ethernet PHYs:
- Broadcom PHYs:
- support for Wake-on-LAN for BCM54210E/B50212E
- report LPI counter
- Microsemi PHYs: support RGMII delay configuration (VSC85xx)
- Micrel PHYs: receive timestamp in the frame (LAN8841)
- Realtek PHYs: support optional external PHY clock
- Altera TSE PCS: merge the driver into Lynx PCS which it is a
variant of
- CAN: Kvaser PCIEcan:
- support packet timestamping
- WiFi:
- Intel (iwlwifi):
- major update for new firmware and Multi-Link Operation (MLO)
- configuration rework to drop test devices and split the
different families
- support for segmented PNVM images and power tables
- new vendor entries for PPAG (platform antenna gain) feature
- Qualcomm 802.11ax (ath11k):
- Multiple Basic Service Set Identifier (MBSSID) and Enhanced
MBSSID Advertisement (EMA) support in AP mode
- support factory test mode
- RealTek (rtw89):
- add RSSI based antenna diversity
- support U-NII-4 channels on 5 GHz band
- RealTek (rtl8xxxu):
- AP mode support for 8188f
- support USB RX aggregation for the newer chips"
* tag 'net-next-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1602 commits)
net: scm: introduce and use scm_recv_unix helper
af_unix: Skip SCM_PIDFD if scm->pid is NULL.
net: lan743x: Simplify comparison
netlink: Add __sock_i_ino() for __netlink_diag_dump().
net: dsa: avoid suspicious RCU usage for synced VLAN-aware MAC addresses
Revert "af_unix: Call scm_recv() only after scm_set_cred()."
phylink: ReST-ify the phylink_pcs_neg_mode() kdoc
libceph: Partially revert changes to support MSG_SPLICE_PAGES
net: phy: mscc: fix packet loss due to RGMII delays
net: mana: use vmalloc_array and vcalloc
net: enetc: use vmalloc_array and vcalloc
ionic: use vmalloc_array and vcalloc
pds_core: use vmalloc_array and vcalloc
gve: use vmalloc_array and vcalloc
octeon_ep: use vmalloc_array and vcalloc
net: usb: qmi_wwan: add u-blox 0x1312 composition
perf trace: fix MSG_SPLICE_PAGES build error
ipvlan: Fix return value of ipvlan_queue_xmit()
netfilter: nf_tables: fix underflow in chain reference counter
netfilter: nf_tables: unbind non-anonymous set if rule construction fails
...
Now that the preparation of an rq_vec has been removed from the
generic read path, nfsd_splice_read() no longer needs to reset
rq_next_page.
nfsd4_encode_read() calls nfsd_splice_read() directly. As far as I
can ascertain, resetting rq_next_page for NFSv4 splice reads is
unnecessary because rq_next_page is already set correctly.
Moreover, resetting it might even be incorrect if previous
operations in the COMPOUND have already consumed at least a page of
the send buffer. I would expect that the result would be encoding
the READ payload over previously-encoded results.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Accrue the following benefits:
a) Deduplicate this common bit of code.
b) Don't prepare rq_vec for NFSv2 and NFSv3 spliced reads, which
don't use rq_vec. This is already the case for
nfsd4_encode_read().
c) Eventually, converting NFSD's read path to use a bvec iterator
will be simpler.
In the next patch, nfsd_iter_read() will replace nfsd_readv() for
all NFS versions.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
We've aligned setgid behavior over multiple kernel releases. The details
can be found in commit cf619f8919 ("Merge tag 'fs.ovl.setgid.v6.2' of
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/idmapping") and
commit 426b4ca2d6 ("Merge tag 'fs.setgid.v6.0' of
git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux").
Consistent setgid stripping behavior is now encapsulated in the
setattr_should_drop_sgid() helper which is used by all filesystems that
strip setgid bits outside of vfs proper. Usually ATTR_KILL_SGID is
raised in e.g., chown_common() and is subject to the
setattr_should_drop_sgid() check to determine whether the setgid bit can
be retained. Since nfsd is raising ATTR_KILL_SGID unconditionally it
will cause notify_change() to strip it even if the caller had the
necessary privileges to retain it. Ensure that nfsd only raises
ATR_KILL_SGID if the caller lacks the necessary privileges to retain the
setgid bit.
Without this patch the setgid stripping tests in LTP will fail:
> As you can see, the problem is S_ISGID (0002000) was dropped on a
> non-group-executable file while chown was invoked by super-user, while
[...]
> fchown02.c:66: TFAIL: testfile2: wrong mode permissions 0100700, expected 0102700
[...]
> chown02.c:57: TFAIL: testfile2: wrong mode permissions 0100700, expected 0102700
With this patch all tests pass.
Reported-by: Sherry Yang <sherry.yang@oracle.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
notify_change can modify the iattr structure. In particular it can
end up setting ATTR_MODE when ATTR_KILL_SUID is already set, causing
a BUG() if the same iattr is passed to notify_change more than once.
Make a copy of the struct iattr before calling notify_change.
Reported-by: Zhi Li <yieli@redhat.com>
Link: https://bugzilla.redhat.com/show_bug.cgi?id=2207969
Tested-by: Zhi Li <yieli@redhat.com>
Fixes: 34b91dda71 ("NFSD: Make nfsd4_setattr() wait before returning NFS4ERR_DELAY")
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tetsuo Handa points out:
> Since GFP_KERNEL is "GFP_NOFS | __GFP_FS", usage like
> "GFP_KERNEL | GFP_NOFS" does not make sense.
The original intent was to hold the inode lock while estimating
the buffer requirements for the requested information. Frank van
der Linden, the author of NFSD's xattr code, says:
> ... you need inode_lock to get an atomic view of an xattr. Since
> both nfsd_getxattr and nfsd_listxattr to the standard trick of
> querying the xattr length with a NULL buf argument (just getting
> the length back), allocating the right buffer size, and then
> querying again, they need to hold the inode lock to avoid having
> the xattr changed from under them while doing that.
>
> From that then flows the requirement that GFP_FS could cause
> problems while holding i_rwsem, so I added GFP_NOFS.
However, Dave Chinner states:
> You can do GFP_KERNEL allocations holding the i_rwsem just fine.
> All that it requires is the caller holds a reference to the
> inode ...
Since these code paths acquire a dentry, they do indeed hold a
reference. It is therefore safe to use GFP_KERNEL for these memory
allocations. In particular, that's what this code is already doing;
but now the C source code looks sane too.
At a later time we can revisit in order to remove the inode lock in
favor of simply retrying if the estimated buffer size is too small.
Reported-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
There have been several bugs over the years where the NFSD splice
actor has attempted to write outside the rq_pages array.
This is a "should never happen" condition, but if for some reason
the pipe splice actor should attempt to walk past the end of
rq_pages, it needs to terminate the READ operation to prevent
corruption of the pointer addresses in the fields just beyond the
array.
A server crash is thus prevented. Since the code is not behaving,
the READ operation returns -EIO to the client. None of the READ
payload data can be trusted if the splice actor isn't operating as
expected.
Suggested-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
- Fix a crash during NFS READs from certain client implementations
- Address a minor kbuild regression in v6.3
-----BEGIN PGP SIGNATURE-----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=frHb
-----END PGP SIGNATURE-----
Merge tag 'nfsd-6.3-3' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux
Pull nfsd fixes from Chuck Lever:
- Fix a crash during NFS READs from certain client implementations
- Address a minor kbuild regression in v6.3
* tag 'nfsd-6.3-3' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
nfsd: don't replace page in rq_pages if it's a continuation of last page
NFS & NFSD: Update GSS dependencies
The splice read calls nfsd_splice_actor to put the pages containing file
data into the svc_rqst->rq_pages array. It's possible however to get a
splice result that only has a partial page at the end, if (e.g.) the
filesystem hands back a short read that doesn't cover the whole page.
nfsd_splice_actor will plop the partial page into its rq_pages array and
return. Then later, when nfsd_splice_actor is called again, the
remainder of the page may end up being filled out. At this point,
nfsd_splice_actor will put the page into the array _again_ corrupting
the reply. If this is done enough times, rq_next_page will overrun the
array and corrupt the trailing fields -- the rq_respages and
rq_next_page pointers themselves.
If we've already added the page to the array in the last pass, don't add
it to the array a second time when dealing with a splice continuation.
This was originally handled properly in nfsd_splice_actor, but commit
91e23b1c39 ("NFSD: Clean up nfsd_splice_actor()") removed the check
for it.
Fixes: 91e23b1c39 ("NFSD: Clean up nfsd_splice_actor()")
Cc: Al Viro <viro@zeniv.linux.org.uk>
Reported-by: Dario Lesca <d.lesca@solinos.it>
Tested-by: David Critch <dcritch@redhat.com>
Link: https://bugzilla.redhat.com/show_bug.cgi?id=2150630
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
- Protect NFSD writes against filesystem freezing
- Fix a potential memory leak during server shutdown
-----BEGIN PGP SIGNATURE-----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=z6NN
-----END PGP SIGNATURE-----
Merge tag 'nfsd-6.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux
Pull nfsd fixes from Chuck Lever:
- Protect NFSD writes against filesystem freezing
- Fix a potential memory leak during server shutdown
* tag 'nfsd-6.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
SUNRPC: Fix a server shutdown leak
NFSD: Protect against filesystem freezing
Flole observes this WARNING on occasion:
[1210423.486503] WARNING: CPU: 8 PID: 1524732 at fs/ext4/ext4_jbd2.c:75 ext4_journal_check_start+0x68/0xb0
Reported-by: <flole@flole.de>
Suggested-by: Jan Kara <jack@suse.cz>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217123
Fixes: 73da852e38 ("nfsd: use vfs_iter_read/write")
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Two significant security enhancements are part of this release:
* NFSD's RPC header encoding and decoding, including RPCSEC GSS
and gssproxy header parsing, has been overhauled to make it
more memory-safe.
* Support for Kerberos AES-SHA2-based encryption types has been
added for both the NFS client and server. This provides a clean
path for deprecating and removing insecure encryption types
based on DES and SHA-1. AES-SHA2 is also FIPS-140 compliant, so
that NFS with Kerberos may now be used on systems with fips
enabled.
In addition to these, NFSD is now able to handle crossing into an
auto-mounted mount point on an exported NFS mount. A number of
fixes have been made to NFSD's server-side copy implementation.
RPC metrics have been converted to per-CPU variables. This helps
reduce unnecessary cross-CPU and cross-node memory bus traffic,
and significantly reduces noise when KCSAN is enabled.
-----BEGIN PGP SIGNATURE-----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=ZG/7
-----END PGP SIGNATURE-----
Merge tag 'nfsd-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux
Pull nfsd updates from Chuck Lever:
"Two significant security enhancements are part of this release:
- NFSD's RPC header encoding and decoding, including RPCSEC GSS and
gssproxy header parsing, has been overhauled to make it more
memory-safe.
- Support for Kerberos AES-SHA2-based encryption types has been added
for both the NFS client and server. This provides a clean path for
deprecating and removing insecure encryption types based on DES and
SHA-1. AES-SHA2 is also FIPS-140 compliant, so that NFS with
Kerberos may now be used on systems with fips enabled.
In addition to these, NFSD is now able to handle crossing into an
auto-mounted mount point on an exported NFS mount. A number of fixes
have been made to NFSD's server-side copy implementation.
RPC metrics have been converted to per-CPU variables. This helps
reduce unnecessary cross-CPU and cross-node memory bus traffic, and
significantly reduces noise when KCSAN is enabled"
* tag 'nfsd-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux: (121 commits)
NFSD: Clean up nfsd_symlink()
NFSD: copy the whole verifier in nfsd_copy_write_verifier
nfsd: don't fsync nfsd_files on last close
SUNRPC: Fix occasional warning when destroying gss_krb5_enctypes
nfsd: fix courtesy client with deny mode handling in nfs4_upgrade_open
NFSD: fix problems with cleanup on errors in nfsd4_copy
nfsd: fix race to check ls_layouts
nfsd: don't hand out delegation on setuid files being opened for write
SUNRPC: Remove ->xpo_secure_port()
SUNRPC: Clean up the svc_xprt_flags() macro
nfsd: remove fs/nfsd/fault_inject.c
NFSD: fix leaked reference count of nfsd4_ssc_umount_item
nfsd: clean up potential nfsd_file refcount leaks in COPY codepath
nfsd: zero out pointers after putting nfsd_files on COPY setup error
SUNRPC: Fix whitespace damage in svcauth_unix.c
nfsd: eliminate __nfs4_get_fd
nfsd: add some kerneldoc comments for stateid preprocessing functions
nfsd: eliminate find_deleg_file_locked
nfsd: don't take nfsd4_copy ref for OP_OFFLOAD_STATUS
SUNRPC: Add encryption self-tests
...
This function is only used by NFSD to cross mount points.
If a mount point is of type auto mount, follow_down() will
not uncover it. Add LOOKUP_AUTOMOUNT to the lookup flags
to have ->d_automount() called when NFSD walks down the
mount tree.
Signed-off-by: Richard Weinberger <richard@nod.at>
Reviewed-by: Ian Kent <raven@themaw.net>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Currently nfsd_mountpoint() tests for mount points using d_mountpoint(),
this works only when a mount point is already uncovered.
In our case the mount point is of type auto mount and can be coverted.
i.e. ->d_automount() was not called.
Using d_managed() nfsd_mountpoint() can test whether a mount point is
either already uncovered or can be uncovered later.
Signed-off-by: Richard Weinberger <richard@nod.at>
Reviewed-by: Ian Kent <raven@themaw.net>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Convert to struct mnt_idmap.
Last cycle we merged the necessary infrastructure in
256c8aed2b ("fs: introduce dedicated idmap type for mounts").
This is just the conversion to struct mnt_idmap.
Currently we still pass around the plain namespace that was attached to a
mount. This is in general pretty convenient but it makes it easy to
conflate namespaces that are relevant on the filesystem with namespaces
that are relevent on the mount level. Especially for non-vfs developers
without detailed knowledge in this area this can be a potential source for
bugs.
Once the conversion to struct mnt_idmap is done all helpers down to the
really low-level helpers will take a struct mnt_idmap argument instead of
two namespace arguments. This way it becomes impossible to conflate the two
eliminating the possibility of any bugs. All of the vfs and all filesystems
only operate on struct mnt_idmap.
Acked-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Convert to struct mnt_idmap.
Last cycle we merged the necessary infrastructure in
256c8aed2b ("fs: introduce dedicated idmap type for mounts").
This is just the conversion to struct mnt_idmap.
Currently we still pass around the plain namespace that was attached to a
mount. This is in general pretty convenient but it makes it easy to
conflate namespaces that are relevant on the filesystem with namespaces
that are relevent on the mount level. Especially for non-vfs developers
without detailed knowledge in this area this can be a potential source for
bugs.
Once the conversion to struct mnt_idmap is done all helpers down to the
really low-level helpers will take a struct mnt_idmap argument instead of
two namespace arguments. This way it becomes impossible to conflate the two
eliminating the possibility of any bugs. All of the vfs and all filesystems
only operate on struct mnt_idmap.
Acked-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Convert to struct mnt_idmap.
Last cycle we merged the necessary infrastructure in
256c8aed2b ("fs: introduce dedicated idmap type for mounts").
This is just the conversion to struct mnt_idmap.
Currently we still pass around the plain namespace that was attached to a
mount. This is in general pretty convenient but it makes it easy to
conflate namespaces that are relevant on the filesystem with namespaces
that are relevent on the mount level. Especially for non-vfs developers
without detailed knowledge in this area this can be a potential source for
bugs.
Once the conversion to struct mnt_idmap is done all helpers down to the
really low-level helpers will take a struct mnt_idmap argument instead of
two namespace arguments. This way it becomes impossible to conflate the two
eliminating the possibility of any bugs. All of the vfs and all filesystems
only operate on struct mnt_idmap.
Acked-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
This release introduces support for the CB_RECALL_ANY operation.
NFSD can send this operation to request that clients return any
delegations they choose. The server uses this operation to handle
low memory scenarios or indicate to a client when that client has
reached the maximum number of delegations the server supports.
The NFSv4.2 READ_PLUS operation has been simplified temporarily
whilst support for sparse files in local filesystems and the VFS is
improved.
Two major data structure fixes appear in this release:
* The nfs4_file hash table is replaced with a resizable hash table
to reduce the latency of NFSv4 OPEN operations.
* Reference counting in the NFSD filecache has been hardened against
races.
In furtherance of removing support for NFSv2 in a subsequent kernel
release, a new Kconfig option enables server-side support for NFSv2
to be left out of a kernel build.
MAINTAINERS has been updated to indicate that changes to fs/exportfs
should go through the NFSD tree.
-----BEGIN PGP SIGNATURE-----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=jNlu
-----END PGP SIGNATURE-----
Merge tag 'nfsd-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux
Pull nfsd updates from Chuck Lever:
"This release introduces support for the CB_RECALL_ANY operation. NFSD
can send this operation to request that clients return any delegations
they choose. The server uses this operation to handle low memory
scenarios or indicate to a client when that client has reached the
maximum number of delegations the server supports.
The NFSv4.2 READ_PLUS operation has been simplified temporarily whilst
support for sparse files in local filesystems and the VFS is improved.
Two major data structure fixes appear in this release:
- The nfs4_file hash table is replaced with a resizable hash table to
reduce the latency of NFSv4 OPEN operations.
- Reference counting in the NFSD filecache has been hardened against
races.
In furtherance of removing support for NFSv2 in a subsequent kernel
release, a new Kconfig option enables server-side support for NFSv2 to
be left out of a kernel build.
MAINTAINERS has been updated to indicate that changes to fs/exportfs
should go through the NFSD tree"
* tag 'nfsd-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux: (49 commits)
NFSD: Avoid clashing function prototypes
SUNRPC: Fix crasher in unwrap_integ_data()
SUNRPC: Make the svc_authenticate tracepoint conditional
NFSD: Use only RQ_DROPME to signal the need to drop a reply
SUNRPC: Clean up xdr_write_pages()
SUNRPC: Don't leak netobj memory when gss_read_proxy_verf() fails
NFSD: add CB_RECALL_ANY tracepoints
NFSD: add delegation reaper to react to low memory condition
NFSD: add support for sending CB_RECALL_ANY
NFSD: refactoring courtesy_client_reaper to a generic low memory shrinker
trace: Relocate event helper files
NFSD: pass range end to vfs_fsync_range() instead of count
lockd: fix file selection in nlmsvc_cancel_blocked
lockd: ensure we use the correct file descriptor when unlocking
lockd: set missing fl_flags field when retrieving args
NFSD: Use struct_size() helper in alloc_session()
nfsd: return error if nfs4_setacl fails
lockd: set other missing fields when unlocking files
NFSD: Add an nfsd_file_fsync tracepoint
sunrpc: svc: Remove an unused static function svc_ungetu32()
...
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCY5bwTgAKCRCRxhvAZXjc
ovd2AQCK00NAtGjQCjQPQGyTa4GAPqvWgq1ef0lnhv+TL5US5gD9FncQ8UofeMXt
pBfjtAD6ettTPCTxUQfnTwWEU4rc7Qg=
=27Wm
-----END PGP SIGNATURE-----
Merge tag 'fs.acl.rework.v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/idmapping
Pull VFS acl updates from Christian Brauner:
"This contains the work that builds a dedicated vfs posix acl api.
The origins of this work trace back to v5.19 but it took quite a while
to understand the various filesystem specific implementations in
sufficient detail and also come up with an acceptable solution.
As we discussed and seen multiple times the current state of how posix
acls are handled isn't nice and comes with a lot of problems: The
current way of handling posix acls via the generic xattr api is error
prone, hard to maintain, and type unsafe for the vfs until we call
into the filesystem's dedicated get and set inode operations.
It is already the case that posix acls are special-cased to death all
the way through the vfs. There are an uncounted number of hacks that
operate on the uapi posix acl struct instead of the dedicated vfs
struct posix_acl. And the vfs must be involved in order to interpret
and fixup posix acls before storing them to the backing store, caching
them, reporting them to userspace, or for permission checking.
Currently a range of hacks and duct tape exist to make this work. As
with most things this is really no ones fault it's just something that
happened over time. But the code is hard to understand and difficult
to maintain and one is constantly at risk of introducing bugs and
regressions when having to touch it.
Instead of continuing to hack posix acls through the xattr handlers
this series builds a dedicated posix acl api solely around the get and
set inode operations.
Going forward, the vfs_get_acl(), vfs_remove_acl(), and vfs_set_acl()
helpers must be used in order to interact with posix acls. They
operate directly on the vfs internal struct posix_acl instead of
abusing the uapi posix acl struct as we currently do. In the end this
removes all of the hackiness, makes the codepaths easier to maintain,
and gets us type safety.
This series passes the LTP and xfstests suites without any
regressions. For xfstests the following combinations were tested:
- xfs
- ext4
- btrfs
- overlayfs
- overlayfs on top of idmapped mounts
- orangefs
- (limited) cifs
There's more simplifications for posix acls that we can make in the
future if the basic api has made it.
A few implementation details:
- The series makes sure to retain exactly the same security and
integrity module permission checks. Especially for the integrity
modules this api is a win because right now they convert the uapi
posix acl struct passed to them via a void pointer into the vfs
struct posix_acl format to perform permission checking on the mode.
There's a new dedicated security hook for setting posix acls which
passes the vfs struct posix_acl not a void pointer. Basing checking
on the posix acl stored in the uapi format is really unreliable.
The vfs currently hacks around directly in the uapi struct storing
values that frankly the security and integrity modules can't
correctly interpret as evidenced by bugs we reported and fixed in
this area. It's not necessarily even their fault it's just that the
format we provide to them is sub optimal.
- Some filesystems like 9p and cifs need access to the dentry in
order to get and set posix acls which is why they either only
partially or not even at all implement get and set inode
operations. For example, cifs allows setxattr() and getxattr()
operations but doesn't allow permission checking based on posix
acls because it can't implement a get acl inode operation.
Thus, this patch series updates the set acl inode operation to take
a dentry instead of an inode argument. However, for the get acl
inode operation we can't do this as the old get acl method is
called in e.g., generic_permission() and inode_permission(). These
helpers in turn are called in various filesystem's permission inode
operation. So passing a dentry argument to the old get acl inode
operation would amount to passing a dentry to the permission inode
operation which we shouldn't and probably can't do.
So instead of extending the existing inode operation Christoph
suggested to add a new one. He also requested to ensure that the
get and set acl inode operation taking a dentry are consistently
named. So for this version the old get acl operation is renamed to
->get_inode_acl() and a new ->get_acl() inode operation taking a
dentry is added. With this we can give both 9p and cifs get and set
acl inode operations and in turn remove their complex custom posix
xattr handlers.
In the future I hope to get rid of the inode method duplication but
it isn't like we have never had this situation. Readdir is just one
example. And frankly, the overall gain in type safety and the more
pleasant api wise are simply too big of a benefit to not accept
this duplication for a while.
- We've done a full audit of every codepaths using variant of the
current generic xattr api to get and set posix acls and
surprisingly it isn't that many places. There's of course always a
chance that we might have missed some and if so I'm sure we'll find
them soon enough.
The crucial codepaths to be converted are obviously stacking
filesystems such as ecryptfs and overlayfs.
For a list of all callers currently using generic xattr api helpers
see [2] including comments whether they support posix acls or not.
- The old vfs generic posix acl infrastructure doesn't obey the
create and replace semantics promised on the setxattr(2) manpage.
This patch series doesn't address this. It really is something we
should revisit later though.
The patches are roughly organized as follows:
(1) Change existing set acl inode operation to take a dentry
argument (Intended to be a non-functional change)
(2) Rename existing get acl method (Intended to be a non-functional
change)
(3) Implement get and set acl inode operations for filesystems that
couldn't implement one before because of the missing dentry.
That's mostly 9p and cifs (Intended to be a non-functional
change)
(4) Build posix acl api, i.e., add vfs_get_acl(), vfs_remove_acl(),
and vfs_set_acl() including security and integrity hooks
(Intended to be a non-functional change)
(5) Implement get and set acl inode operations for stacking
filesystems (Intended to be a non-functional change)
(6) Switch posix acl handling in stacking filesystems to new posix
acl api now that all filesystems it can stack upon support it.
(7) Switch vfs to new posix acl api (semantical change)
(8) Remove all now unused helpers
(9) Additional regression fixes reported after we merged this into
linux-next
Thanks to Seth for a lot of good discussion around this and
encouragement and input from Christoph"
* tag 'fs.acl.rework.v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/idmapping: (36 commits)
posix_acl: Fix the type of sentinel in get_acl
orangefs: fix mode handling
ovl: call posix_acl_release() after error checking
evm: remove dead code in evm_inode_set_acl()
cifs: check whether acl is valid early
acl: make vfs_posix_acl_to_xattr() static
acl: remove a slew of now unused helpers
9p: use stub posix acl handlers
cifs: use stub posix acl handlers
ovl: use stub posix acl handlers
ecryptfs: use stub posix acl handlers
evm: remove evm_xattr_acl_change()
xattr: use posix acl api
ovl: use posix acl api
ovl: implement set acl method
ovl: implement get acl method
ecryptfs: implement set acl method
ecryptfs: implement get acl method
ksmbd: use vfs_remove_acl()
acl: add vfs_remove_acl()
...
direction misannotations and (hopefully) preventing
more of the same for the future.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-----BEGIN PGP SIGNATURE-----
iHQEABYIAB0WIQQqUNBr3gm4hGXdBJlZ7Krx/gZQ6wUCY5ZzQAAKCRBZ7Krx/gZQ
65RZAP4nTkvOn0NZLVFkuGOx8pgJelXAvrteyAuecVL8V6CR4AD40qCVY51PJp8N
MzwiRTeqnGDxTTF7mgd//IB6hoatAA==
=bcvF
-----END PGP SIGNATURE-----
Merge tag 'pull-iov_iter' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull iov_iter updates from Al Viro:
"iov_iter work; most of that is about getting rid of direction
misannotations and (hopefully) preventing more of the same for the
future"
* tag 'pull-iov_iter' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
use less confusing names for iov_iter direction initializers
iov_iter: saner checks for attempt to copy to/from iterator
[xen] fix "direction" argument of iov_iter_kvec()
[vhost] fix 'direction' argument of iov_iter_{init,bvec}()
[target] fix iov_iter_bvec() "direction" argument
[s390] memcpy_real(): WRITE is "data source", not destination...
[s390] zcore: WRITE is "data source", not destination...
[infiniband] READ is "data destination", not source...
[fsi] WRITE is "data source", not destination...
[s390] copy_oldmem_kernel() - WRITE is "data source", not destination
csum_and_copy_to_iter(): handle ITER_DISCARD
get rid of unlikely() on page_copy_sane() calls
NFSv4 operations manage the lifetime of nfsd_file items they use by
means of NFSv4 OPEN and CLOSE. Hence there's no need for them to be
garbage collected.
Introduce a mechanism to enable garbage collection for nfsd_file
items used only by NFSv2/3 callers.
Note that the change in nfsd_file_put() ensures that both CLOSE and
DELEGRETURN will actually close out and free an nfsd_file on last
reference of a non-garbage-collected file.
Link: https://bugzilla.linux-nfs.org/show_bug.cgi?id=394
Suggested-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: NeilBrown <neilb@suse.de>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
In a moment I'm going to introduce separate nfsd_file types, one of
which is garbage-collected; the other, not. The garbage-collected
variety is to be used by NFSv2 and v3, and the non-garbage-collected
variety is to be used by NFSv4.
nfsd_commit() is invoked by both NFSv3 and NFSv4 consumers. We want
nfsd_commit() to find and use the correct variety of cached
nfsd_file object for the NFS version that is in use.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: NeilBrown <neilb@suse.de>
nfserrno() is common to all nfs versions, but nfsproc.c is specifically
for NFSv2. Move it to vfs.c, and the prototype to vfs.h.
While we're in here, remove the #ifdef EDQUOT check in this function.
It's apparently a holdover from the initial merge of the nfsd code in
1997. No other place in the kernel checks that that symbol is defined
before using it, so I think we can dispense with it here.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Variable host_err is assigned a value that is never read, it is being
re-assigned a value in every different execution path in the following
switch statement. The assignment is redundant and can be removed.
Cleans up clang-scan warning:
warning: Value stored to 'host_err' is never read [deadcode.DeadStores]
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
- Fix rare data corruption on READ operations
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEEKLLlsBKG3yQ88j7+M2qzM29mf5cFAmOCPhcACgkQM2qzM29m
f5ewTRAAuAjJvtnsRxZBILs76U3KpAnn3ghtYKtzCmanq1UEJAlTz5vLLCqJRTXw
OajN4f/T/kD3bY5XxYcsbSMhVJhgd7JMx/DyPjp3rY+nS1cS/CB+TxN3VqhOZJDl
MfEJTN0MxWrq0pXKYxuPECmwk/C7jAU4vjWU+sDWhu4Anig564fdPxGGWw9vRfh5
YP8U8cuM5LIFCM2ZSjPsqWEXgd7pbYpYdOx6JPA74ftia8RBU1YVbIqZ6uFXiTnV
tpKAuQYem2ixV6UfsrVbeHDfsSkQcX2iaTGlcLB5y12nprV0wTOQM6lONTD878vh
37oc8zG9cdpWfcRzkyB8a58jHfSk74pMkV300C38CeV1KtajFVoRkoTvLYJdxbf8
WPcRcbsXbotb4+A1D2H6QvPKUbrlK+HIHe8POU67tKq5BI8xRw+ojTsJ2ANYr9Jt
OviLUraUnKFvCK2LN03+Op4l+UBTIdOGzGMqveILfxPD6zlTYJbQQ64Nih4JLfJG
uDN2892H4He3he5oD9Dzoh2xSWfLV5PJEAaN9wW7pyv8D5HfYBXWPan6JeaMHnfW
+NcoFQ3cSewyMZ1Rw0aCsKfXRGwikJrbAsrlvNe+uFRD6ueeWULp5fnTlOn+0tW1
tp+EzLOMoNkL9NW/rLeCIPN1MNXzgabgd4Diq8U3iTDRxf0FahU=
=zxjk
-----END PGP SIGNATURE-----
Merge tag 'nfsd-6.1-6' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux
Pull nfsd fix from Chuck Lever:
- Fix rare data corruption on READ operations
* tag 'nfsd-6.1-6' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
NFSD: Fix reads with a non-zero offset that don't end on a page boundary
READ/WRITE proved to be actively confusing - the meanings are
"data destination, as used with read(2)" and "data source, as
used with write(2)", but people keep interpreting those as
"we read data from it" and "we write data to it", i.e. exactly
the wrong way.
Call them ITER_DEST and ITER_SOURCE - at least that is harder
to misinterpret...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Commit 868f9f2f8e ("vfs: fix copy_file_range() regression in cross-fs
copies") removed fallback to generic_copy_file_range() for cross-fs
cases inside vfs_copy_file_range().
To preserve behavior of nfsd and ksmbd server-side-copy, the fallback to
generic_copy_file_range() was added in nfsd and ksmbd code, but that
call is missing sb_start_write(), fsnotify hooks and more.
Ideally, nfsd and ksmbd would pass a flag to vfs_copy_file_range() that
will take care of the fallback, but that code would be subtle and we got
vfs_copy_file_range() logic wrong too many times already.
Instead, add a flag to explicitly request vfs_copy_file_range() to
perform only generic_copy_file_range() and let nfsd and ksmbd use this
flag only in the fallback path.
This choise keeps the logic changes to minimum in the non-nfsd/ksmbd code
paths to reduce the risk of further regressions.
Fixes: 868f9f2f8e ("vfs: fix copy_file_range() regression in cross-fs copies")
Tested-by: Namjae Jeon <linkinjeon@kernel.org>
Tested-by: Luis Henriques <lhenriques@suse.de>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
This was found when virtual machines with nfs-mounted qcow2 disks
failed to boot properly.
Reported-by: Anders Blomdell <anders.blomdell@control.lth.se>
Suggested-by: Al Viro <viro@zeniv.linux.org.uk>
Link: https://bugzilla.redhat.com/show_bug.cgi?id=2142132
Fixes: bfbfb6182a ("nfsd_splice_actor(): handle compound pages")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
The current way of setting and getting posix acls through the generic
xattr interface is error prone and type unsafe. The vfs needs to
interpret and fixup posix acls before storing or reporting it to
userspace. Various hacks exist to make this work. The code is hard to
understand and difficult to maintain in it's current form. Instead of
making this work by hacking posix acls through xattr handlers we are
building a dedicated posix acl api around the get and set inode
operations. This removes a lot of hackiness and makes the codepaths
easier to maintain. A lot of background can be found in [1].
Since some filesystem rely on the dentry being available to them when
setting posix acls (e.g., 9p and cifs) they cannot rely on set acl inode
operation. But since ->set_acl() is required in order to use the generic
posix acl xattr handlers filesystems that do not implement this inode
operation cannot use the handler and need to implement their own
dedicated posix acl handlers.
Update the ->set_acl() inode method to take a dentry argument. This
allows all filesystems to rely on ->set_acl().
As far as I can tell all codepaths can be switched to rely on the dentry
instead of just the inode. Note that the original motivation for passing
the dentry separate from the inode instead of just the dentry in the
xattr handlers was because of security modules that call
security_d_instantiate(). This hook is called during
d_instantiate_new(), d_add(), __d_instantiate_anon(), and
d_splice_alias() to initialize the inode's security context and possibly
to set security.* xattrs. Since this only affects security.* xattrs this
is completely irrelevant for posix acls.
Link: https://lore.kernel.org/all/20220801145520.1532837-1-brauner@kernel.org [1]
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
nfsd_unlink() can kick off a CB_RECALL (via
vfs_unlink() -> leases_conflict()) if a delegation is present.
Before returning NFS4ERR_DELAY, give the client holding that
delegation a chance to return it and then retry the nfsd_unlink()
again, once.
Link: https://bugzilla.linux-nfs.org/show_bug.cgi?id=354
Tested-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
nfsd_rename() can kick off a CB_RECALL (via
vfs_rename() -> leases_conflict()) if a delegation is present.
Before returning NFS4ERR_DELAY, give the client holding that
delegation a chance to return it and then retry the nfsd_rename()
again, once.
This version of the patch handles renaming an existing file,
but does not deal with renaming onto an existing file. That
case will still always trigger an NFS4ERR_DELAY.
Link: https://bugzilla.linux-nfs.org/show_bug.cgi?id=354
Tested-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
nfsd_setattr() can kick off a CB_RECALL (via
notify_change() -> break_lease()) if a delegation is present. Before
returning NFS4ERR_DELAY, give the client holding that delegation a
chance to return it and then retry the nfsd_setattr() again, once.
Link: https://bugzilla.linux-nfs.org/show_bug.cgi?id=354
Tested-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Move code that will be retried (in a subsequent patch) into a helper
function.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
nfsd_create_locked() does not use the "fname" and "flen" arguments, so
drop them from declaration and all callers.
Signed-off-by: NeilBrown <neilb@suse.de>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQqUNBr3gm4hGXdBJlZ7Krx/gZQ6wUCYx/tpQAKCRBZ7Krx/gZQ
6wuPAQCrJ18XdncE/VnpRfcpQ+UQJXryURXwijaVBswv3LpM/gEAgQcmFff7pR0P
ZXzS56F/D0faE2evltbAMQCWUoeapQA=
=mTrE
-----END PGP SIGNATURE-----
Merge tag 'pull-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull iov_iter fix from Al Viro:
"Fix for a nfsd regression caused by the iov_iter stuff this window"
* tag 'pull-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
nfsd_splice_actor(): handle compound pages
pipe_buffer might refer to a compound page (and contain more than a PAGE_SIZE
worth of data). Theoretically it had been possible since way back, but
nfsd_splice_actor() hadn't run into that until copy_page_to_iter() change.
Fortunately, the only thing that changes for compound pages is that we
need to stuff each relevant subpage in and convert the offset into offset
in the first subpage.
Acked-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Benjamin Coddington <bcodding@redhat.com>
Fixes: f0f6b614f8 "copy_page_to_iter(): don't split high-order page in case of ITER_PIPE"
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
A recent patch moved ACL setting into nfsd_setattr().
Unfortunately it didn't work as nfsd_setattr() aborts early if
iap->ia_valid is 0.
Remove this test, and instead avoid calling notify_change() when
ia_valid is 0.
This means that nfsd_setattr() will now *always* lock the inode.
Previously it didn't if only a ATTR_MODE change was requested on a
symlink (see Commit 15b7a1b86d ("[PATCH] knfsd: fix setattr-on-symlink
error return")). I don't think this change really matters.
Fixes: c0cbe70742 ("NFSD: add posix ACLs to struct nfsd_attrs")
Signed-off-by: NeilBrown <neilb@suse.de>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
filldir_t instances (directory iterators callbacks) used to return 0 for
"OK, keep going" or -E... for "stop". Note that it's *NOT* how the
error values are reported - the rules for those are callback-dependent
and ->iterate{,_shared}() instances only care about zero vs. non-zero
(look at emit_dir() and friends).
So let's just return bool ("should we keep going?") - it's less confusing
that way. The choice between "true means keep going" and "true means
stop" is bikesheddable; we have two groups of callbacks -
do something for everything in directory, until we run into problem
and
find an entry in directory and do something to it.
The former tended to use 0/-E... conventions - -E<something> on failure.
The latter tended to use 0/1, 1 being "stop, we are done".
The callers treated anything non-zero as "stop", ignoring which
non-zero value did they get.
"true means stop" would be more natural for the second group; "true
means keep going" - for the first one. I tried both variants and
the things like
if allocation failed
something = -ENOMEM;
return true;
just looked unnatural and asking for trouble.
[folded suggestion from Matthew Wilcox <willy@infradead.org>]
Acked-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
As all inode locking is now fully balanced, fh_put() does not need to
call fh_unlock().
fh_lock() and fh_unlock() are no longer used, so discard them.
These are the only real users of ->fh_locked, so discard that too.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
When locking a file to access ACLs and xattrs etc, use explicit locking
with inode_lock() instead of fh_lock(). This means that the calls to
fh_fill_pre/post_attr() are also explicit which improves readability and
allows us to place them only where they are needed. Only the xattr
calls need pre/post information.
When locking a file we don't need I_MUTEX_PARENT as the file is not a
parent of anything, so we can use inode_lock() directly rather than the
inode_lock_nested() call that fh_lock() uses.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
When creating or unlinking a name in a directory use explicit
inode_lock_nested() instead of fh_lock(), and explicit calls to
fh_fill_pre_attrs() and fh_fill_post_attrs(). This is already done
for renames, with lock_rename() as the explicit locking.
Also move the 'fill' calls closer to the operation that might change the
attributes. This way they are avoided on some error paths.
For the v2-only code in nfsproc.c, the fill calls are not replaced as
they aren't needed.
Making the locking explicit will simplify proposed future changes to
locking for directories. It also makes it easily visible exactly where
pre/post attributes are used - not all callers of fh_lock() actually
need the pre/post attributes.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
nfsd_lookup() takes an exclusive lock on the parent inode, but no
callers want the lock and it may not be needed at all if the
result is in the dcache.
Change nfsd_lookup_dentry() to not take the lock, and call
lookup_one_len_locked() which takes lock only if needed.
nfsd4_open() currently expects the lock to still be held, but that isn't
necessary as nfsd_validate_delegated_dentry() provides required
guarantees without the lock.
NOTE: NFSv4 requires directory changeinfo for OPEN even when a create
wasn't requested and no change happened. Now that nfsd_lookup()
doesn't use fh_lock(), we need to explicitly fill the attributes
when no create happens. A new fh_fill_both_attrs() is provided
for that task.
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
On non-error paths, nfsd_link() calls fh_unlock() twice. This is safe
because fh_unlock() records that the unlock has been done and doesn't
repeat it.
However it makes the code a little confusing and interferes with changes
that are planned for directory locking.
So rearrange the code to ensure fh_unlock() is called exactly once if
fh_lock() was called.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Some error paths in nfsd_unlink() allow it to exit without unlocking the
directory. This is not a problem in practice as the directory will be
locked with an fh_put(), but it is untidy and potentially confusing.
This allows us to remove all the fh_unlock() calls that are immediately
after nfsd_unlink() calls.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
nfsd_create() usually returns with the directory still locked.
nfsd_symlink() usually returns with it unlocked. This is clumsy.
Until recently nfsd_create() needed to keep the directory locked until
ACLs and security label had been set. These are now set inside
nfsd_create() (in nfsd_setattr()) so this need is gone.
So change nfsd_create() and nfsd_symlink() to always unlock, and remove
any fh_unlock() calls that follow calls to these functions.
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
pacl and dpacl pointers are added to struct nfsd_attrs, which requires
that we have an nfsd_attrs_free() function to free them.
Those nfsv4 functions that can set ACLs now set up these pointers
based on the passed in NFSv4 ACL.
nfsd_setattr() sets the acls as appropriate.
Errors are handled as with security labels.
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
