Use vm_insert_pages() for tcp receive zerocopy. Spin lock cycles (as
reported by perf) drop from a couple of percentage points to a fraction of
a percent. This results in a roughly 6% increase in efficiency, measured
roughly as zerocopy receive count divided by CPU utilization.
The intention of this patchset is to reduce atomic ops for tcp zerocopy
receives, which normally hits the same spinlock multiple times
consecutively.
[akpm@linux-foundation.org: suppress gcc-7.2.0 warning]
Link: http://lkml.kernel.org/r/20200128025958.43490-3-arjunroy.kdev@gmail.com
Signed-off-by: Arjun Roy <arjunroy@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Soheil Hassas Yeganeh <soheil@google.com>
Cc: David Miller <davem@davemloft.net>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
This selftest tests for cases where sendfile's 'count'
parameter is provided with a size greater than the intended
file size.
Motivation: When sendfile is provided with 'count' parameter
value that is greater than the size of the file, kTLS example
fails to send the file correctly. Last chunk of the file is
not sent, and the data integrity is compromised.
The reason is that the last chunk has MSG_MORE flag set
because of which it gets added to pending records, but is
not pushed.
Note that if user space were to send SSL_shutdown control
message, pending records would get flushed and the issue
would not happen. So a shutdown control message following
sendfile can mask the issue.
Signed-off-by: Pooja Trivedi <pooja.trivedi@stackpath.com>
Signed-off-by: Mallesham Jatharkonda <mallesham.jatharkonda@oneconvergence.com>
Signed-off-by: Josh Tway <josh.tway@stackpath.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
* fix the deadlock on rfkill/wireless removal that a few
people reported
* fix an uninitialized variable
* update wiki URLs
-----BEGIN PGP SIGNATURE-----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=wP9I
-----END PGP SIGNATURE-----
Merge tag 'mac80211-for-davem-2020-06-08' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211
Johannes Berg says:
====================
Just a small update:
* fix the deadlock on rfkill/wireless removal that a few
people reported
* fix an uninitialized variable
* update wiki URLs
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
In the files:
- net/mac80211/rx.c
- net/wireless/Kconfig
the wiki url is still the old "wireless.kernel.org"
instead of the new "wireless.wiki.kernel.org"
Signed-off-by: Flavio Suligoi <f.suligoi@asem.it>
Link: https://lore.kernel.org/r/20200605154112.16277-10-f.suligoi@asem.it
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The wiki url is still the old "wireless.kernel.org"
instead of the new "wireless.wiki.kernel.org"
Signed-off-by: Flavio Suligoi <f.suligoi@asem.it>
Link: https://lore.kernel.org/r/20200605154112.16277-9-f.suligoi@asem.it
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In the files:
- regulatory.rst
- mac80211-injection.rst
the wiki url is still the old "wireless.kernel.org"
instead of the new "wireless.wiki.kernel.org"
Signed-off-by: Flavio Suligoi <f.suligoi@asem.it>
Link: https://lore.kernel.org/r/20200605154112.16277-2-f.suligoi@asem.it
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Pull networking fixes from David Miller:
- Fix the build with certain Kconfig combinations for the Chelsio
inline TLS device, from Rohit Maheshwar and Vinay Kumar Yadavi.
- Fix leak in genetlink, from Cong Lang.
- Fix out of bounds packet header accesses in seg6, from Ahmed
Abdelsalam.
- Two XDP fixes in the ENA driver, from Sameeh Jubran
- Use rwsem in device rename instead of a seqcount because this code
can sleep, from Ahmed S. Darwish.
- Fix WoL regressions in r8169, from Heiner Kallweit.
- Fix qed crashes in kdump mode, from Alok Prasad.
- Fix the callbacks used for certain thermal zones in mlxsw, from Vadim
Pasternak.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (35 commits)
net: dsa: lantiq_gswip: fix and improve the unsupported interface error
mlxsw: core: Use different get_trend() callbacks for different thermal zones
net: dp83869: Reset return variable if PHY strap is read
rhashtable: Drop raw RCU deref in nested_table_free
cxgb4: Use kfree() instead kvfree() where appropriate
net: qed: fixes crash while running driver in kdump kernel
vsock/vmci: make vmci_vsock_transport_cb() static
net: ethtool: Fix comment mentioning typo in IS_ENABLED()
net: phy: mscc: fix Serdes configuration in vsc8584_config_init
net: mscc: Fix OF_MDIO config check
net: marvell: Fix OF_MDIO config check
net: dp83867: Fix OF_MDIO config check
net: dp83869: Fix OF_MDIO config check
net: ethernet: mvneta: fix MVNETA_SKB_HEADROOM alignment
ethtool: linkinfo: remove an unnecessary NULL check
net/xdp: use shift instead of 64 bit division
crypto/chtls:Fix compile error when CONFIG_IPV6 is disabled
inet_connection_sock: clear inet_num out of destroy helper
yam: fix possible memory leak in yam_init_driver
lan743x: Use correct MAC_CR configuration for 1 GBit speed
...
Pull sparc updates from David Miller:
- Rework the sparc32 page tables so that READ_ONCE(*pmd), as done by
generic code, operates on a word sized element. From Will Deacon.
- Some scnprintf() conversions, from Chen Zhou.
- A pin_user_pages() conversion from John Hubbard.
- Several 32-bit ptrace register handling fixes and such from Al Viro.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-next:
fix a braino in "sparc32: fix register window handling in genregs32_[gs]et()"
sparc32: mm: Only call ctor()/dtor() functions for first and last user
sparc32: mm: Disable SPLIT_PTLOCK_CPUS
sparc32: mm: Don't try to free page-table pages if ctor() fails
sparc32: register memory occupied by kernel as memblock.memory
sparc: remove unused header file nfs_fs.h
sparc32: fix register window handling in genregs32_[gs]et()
sparc64: fix misuses of access_process_vm() in genregs32_[sg]et()
oradax: convert get_user_pages() --> pin_user_pages()
sparc: use scnprintf() in show_pciobppath_attr() in vio.c
sparc: use scnprintf() in show_pciobppath_attr() in pci.c
tty: vcc: Fix error return code in vcc_probe()
sparc32: mm: Reduce allocation size for PMD and PTE tables
sparc32: mm: Change pgtable_t type to pte_t * instead of struct page *
sparc32: mm: Restructure sparc32 MMU page-table layout
sparc32: mm: Fix argument checking in __srmmu_get_nocache()
sparc64: Replace zero-length array with flexible-array
sparc: mm: return true,false in kern_addr_valid()
While trying to use the lantiq_gswip driver on one of my boards I made
a mistake when specifying the phy-mode (because the out-of-tree driver
wants phy-mode "gmii" or "mii" for the internal PHYs). In this case the
following error is printed multiple times:
Unsupported interface: 3
While it gives at least a hint at what may be wrong it is not very user
friendly. Print the human readable phy-mode and also which port is
configured incorrectly (this hardware supports ports 0..6) to improve
the cases where someone made a mistake.
Fixes: 14fceff477 ("net: dsa: Add Lantiq / Intel DSA driver for vrx200")
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Acked-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
The driver registers three different types of thermal zones: For the
ASIC itself, for port modules and for gearboxes.
Currently, all three types use the same get_trend() callback which does
not work correctly for the ASIC thermal zone. The callback assumes that
the device data is of type 'struct mlxsw_thermal_module', whereas for
the ASIC thermal zone 'struct mlxsw_thermal' is passed as device data.
Fix this by using one get_trend() callback for the ASIC thermal zone and
another for the other two types.
Fixes: 6f73862fab ("mlxsw: core: Add the hottest thermal zone detection")
Signed-off-by: Vadim Pasternak <vadimp@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
kernel cycle.
New drivers:
- Intel Jasper Lake support.
- NXP Freescale i.MX8DXL support.
- Qualcomm SM8250 support.
- Renesas R8A7742 SH-PFC support.
Driver improvements:
- Severe cleanup and modernization of the MCP23s08 driver.
- Mediatek driver modularized.
- Setting config supported in the Meson driver.
- Wakeup support for the Broadcom BCM7211.
-----BEGIN PGP SIGNATURE-----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=3UGk
-----END PGP SIGNATURE-----
Merge tag 'pinctrl-v5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control updates from Linus Walleij:
"This is the bulk of pin control changes for the v5.8 kernel cycle.
It's just really boring this time. Zero core changes. Just linear
development, cleanups and misc noncritical fixes. Some new drivers for
very new Qualcomm and Intel chips.
New drivers:
- Intel Jasper Lake support.
- NXP Freescale i.MX8DXL support.
- Qualcomm SM8250 support.
- Renesas R8A7742 SH-PFC support.
Driver improvements:
- Severe cleanup and modernization of the MCP23s08 driver.
- Mediatek driver modularized.
- Setting config supported in the Meson driver.
- Wakeup support for the Broadcom BCM7211"
* tag 'pinctrl-v5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (72 commits)
pinctrl: sprd: Fix the incorrect pull-up definition
pinctrl: pxa: pxa2xx: Remove 'pxa2xx_pinctrl_exit()' which is unused and broken
pinctrl: freescale: imx: Use 'devm_of_iomap()' to avoid a resource leak in case of error in 'imx_pinctrl_probe()'
pinctrl: freescale: imx: Fix an error handling path in 'imx_pinctrl_probe()'
pinctrl: sirf: add missing put_device() call in sirfsoc_gpio_probe()
pinctrl: imxl: Fix an error handling path in 'imx1_pinctrl_core_probe()'
pinctrl: bcm2835: Add support for wake-up interrupts
pinctrl: bcm2835: Match BCM7211 compatible string
dt-bindings: pinctrl: Document optional BCM7211 wake-up interrupts
dt-bindings: pinctrl: Document 7211 compatible for brcm, bcm2835-gpio.txt
dt-bindings: pinctrl: stm32: Add missing interrupts property
pinctrl: at91-pio4: Add COMPILE_TEST support
pinctrl: Fix return value about devm_platform_ioremap_resource()
MAINTAINERS: Renesas Pin Controllers are supported
dt-bindings: pinctrl: ocelot: Add Sparx5 SoC support
pinctrl: ocelot: Fix GPIO interrupt decoding on Jaguar2
pinctrl: ocelot: Remove instance number from pin functions
pinctrl: ocelot: Always register GPIO driver
dt-bindings: pinctrl: rockchip: update example
pinctrl: amd: Add ACPI dependency
...
Subsystem:
- new VL flag for backup switch over
Drivers:
- ingenic: only support device tree
- pcf2127: report battery switch over, handle nowayout
-----BEGIN PGP SIGNATURE-----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=dsKr
-----END PGP SIGNATURE-----
Merge tag 'rtc-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux
Pull RTC updates from Alexandre Belloni:
"Not much this cycle apart from the ingenic rtc driver rework.
The fixes are mainly minor issues reported by coccinelle rather than
real world issues.
Subsystem:
- new VL flag for backup switch over
Drivers:
- ingenic: only support device tree
- pcf2127: report battery switch over, handle nowayout"
* tag 'rtc-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (29 commits)
rtc: pcf2127: watchdog: handle nowayout feature
rtc: fsl-ftm-alarm: fix freeze(s2idle) failed to wake
rtc: abx80x: Provide debug feedback for invalid dt properties
rtc: abx80x: Add Device Tree matching table
rtc: rv3028: Add missed check for devm_regmap_init_i2c()
rtc: mpc5121: Use correct return value for mpc5121_rtc_probe()
rtc: goldfish: Use correct return value for goldfish_rtc_probe()
rtc: snvs: Add necessary clock operations for RTC APIs
rtc: snvs: Make SNVS clock always prepared
rtc: ingenic: Reset regulator register in probe
rtc: ingenic: Fix masking of error code
rtc: ingenic: Remove unused fields from private structure
rtc: ingenic: Set wakeup params in probe
rtc: ingenic: Enable clock in probe
rtc: ingenic: Use local 'dev' variable in probe
rtc: ingenic: Only support probing from devicetree
rtc: mc13xxx: fix a double-unlock issue
rtc: stmp3xxx: update contact email
rtc: max77686: Use single-byte writes on MAX77620
rtc: pcf2127: report battery switch over
...
for ntb tests
-----BEGIN PGP SIGNATURE-----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=cp25
-----END PGP SIGNATURE-----
Merge tag 'ntb-5.8' of git://github.com/jonmason/ntb
Pull NTB updates from Jon Mason:
"Intel Icelake NTB support, Intel driver bug fixes, and lots of bug
fixes for ntb tests"
* tag 'ntb-5.8' of git://github.com/jonmason/ntb:
NTB: ntb_test: Fix bug when counting remote files
NTB: perf: Fix race condition when run with ntb_test
NTB: perf: Fix support for hardware that doesn't have port numbers
NTB: perf: Don't require one more memory window than number of peers
NTB: ntb_pingpong: Choose doorbells based on port number
NTB: Fix the default port and peer numbers for legacy drivers
NTB: Revert the change to use the NTB device dev for DMA allocations
NTB: ntb_tool: reading the link file should not end in a NULL byte
ntb_perf: avoid false dma unmap of destination address
ntb_perf: increase sleep time from one milli sec to one sec
ntb_tool: pass correct struct device to dma_alloc_coherent
ntb_perf: pass correct struct device to dma_alloc_coherent
ntb: hw: remove the code that sets the DMA mask
NTB: correct ntb_peer_spad_addr and ntb_peer_spad_read comment typos
ntb: intel: fix static declaration
ntb: intel: add hw workaround for NTB BAR alignment
ntb: intel: Add Icelake (gen4) support for Intel NTB
NTB: Fix static check warning in perf_clear_test
include/ntb: Fix typo in ntb_unregister_device description
+ Features
- Replace zero-length array with flexible-array
- add a valid state flags check
- add consistency check between state and dfa diff encode flags
- add apparmor subdir to proc attr interface
- fail unpack if profile mode is unknown
- add outofband transition and use it in xattr match
- ensure that dfa state tables have entries
+ Cleanups
- Use true and false for bool variable
- Remove semicolon
- Clean code by removing redundant instructions
- Replace two seq_printf() calls by seq_puts() in aa_label_seq_xprint()
- remove duplicate check of xattrs on profile attachment
- remove useless aafs_create_symlink
+ Bug fixes
- Fix memory leak of profile proxy
- fix introspection of of task mode for unconfined tasks
- fix nnp subset test for unconfined
- check/put label on apparmor_sk_clone_security()
-----BEGIN PGP SIGNATURE-----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=U7d2
-----END PGP SIGNATURE-----
Merge tag 'apparmor-pr-2020-06-07' of git://git.kernel.org/pub/scm/linux/kernel/git/jj/linux-apparmor
Pull apparmor updates from John Johansen:
"Features:
- Replace zero-length array with flexible-array
- add a valid state flags check
- add consistency check between state and dfa diff encode flags
- add apparmor subdir to proc attr interface
- fail unpack if profile mode is unknown
- add outofband transition and use it in xattr match
- ensure that dfa state tables have entries
Cleanups:
- Use true and false for bool variable
- Remove semicolon
- Clean code by removing redundant instructions
- Replace two seq_printf() calls by seq_puts() in aa_label_seq_xprint()
- remove duplicate check of xattrs on profile attachment
- remove useless aafs_create_symlink
Bug fixes:
- Fix memory leak of profile proxy
- fix introspection of of task mode for unconfined tasks
- fix nnp subset test for unconfined
- check/put label on apparmor_sk_clone_security()"
* tag 'apparmor-pr-2020-06-07' of git://git.kernel.org/pub/scm/linux/kernel/git/jj/linux-apparmor:
apparmor: Fix memory leak of profile proxy
apparmor: fix introspection of of task mode for unconfined tasks
apparmor: check/put label on apparmor_sk_clone_security()
apparmor: Use true and false for bool variable
security/apparmor/label.c: Clean code by removing redundant instructions
apparmor: Replace zero-length array with flexible-array
apparmor: ensure that dfa state tables have entries
apparmor: remove duplicate check of xattrs on profile attachment.
apparmor: add outofband transition and use it in xattr match
apparmor: fail unpack if profile mode is unknown
apparmor: fix nnp subset test for unconfined
apparmor: remove useless aafs_create_symlink
apparmor: add proc subdir to attrs
apparmor: add consistency check between state and dfa diff encode flags
apparmor: add a valid state flags check
AppArmor: Remove semicolon
apparmor: Replace two seq_printf() calls by seq_puts() in aa_label_seq_xprint()
Commit 6cc7c266e5 ("ima: Call ima_calc_boot_aggregate() in
ima_eventdigest_init()") added a call to ima_calc_boot_aggregate() so that
the digest can be recalculated for the boot_aggregate measurement entry if
the 'd' template field has been requested. For the 'd' field, only SHA1 and
MD5 digests are accepted.
Given that ima_eventdigest_init() does not have the __init annotation, all
functions called should not have it. This patch removes __init from
ima_pcrread().
Cc: stable@vger.kernel.org
Fixes: 6cc7c266e5 ("ima: Call ima_calc_boot_aggregate() in ima_eventdigest_init()")
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When the proxy isn't replaced and the profile is removed, the proxy
is being leaked resulting in a kmemleak check message of
unreferenced object 0xffff888077a3a490 (size 16):
comm "apparmor_parser", pid 128041, jiffies 4322684109 (age 1097.028s)
hex dump (first 16 bytes):
03 00 00 00 00 00 00 00 b0 92 fd 4b 81 88 ff ff ...........K....
backtrace:
[<0000000084d5daf2>] aa_alloc_proxy+0x58/0xe0
[<00000000ecc0e21a>] aa_alloc_profile+0x159/0x1a0
[<000000004cc9ce15>] unpack_profile+0x275/0x1c40
[<000000007332b3ca>] aa_unpack+0x1e7/0x7e0
[<00000000e25e31bd>] aa_replace_profiles+0x18a/0x1d10
[<00000000350d9415>] policy_update+0x237/0x650
[<000000003fbf934e>] profile_load+0x122/0x160
[<0000000047f7b781>] vfs_write+0x139/0x290
[<000000008ad12358>] ksys_write+0xcd/0x170
[<000000001a9daa7b>] do_syscall_64+0x70/0x310
[<00000000b9efb0cf>] entry_SYSCALL_64_after_hwframe+0x49/0xb3
Make sure to cleanup the profile's embedded label which will result
on the proxy being properly freed.
Fixes: 637f688dc3 ("apparmor: switch from profiles to using labels on contexts")
Signed-off-by: John Johansen <john.johansen@canonical.com>
Fix two issues with introspecting the task mode.
1. If a task is attached to a unconfined profile that is not the
ns->unconfined profile then. Mode the mode is always reported
as -
$ ps -Z
LABEL PID TTY TIME CMD
unconfined 1287 pts/0 00:00:01 bash
test (-) 1892 pts/0 00:00:00 ps
instead of the correct value of (unconfined) as shown below
$ ps -Z
LABEL PID TTY TIME CMD
unconfined 2483 pts/0 00:00:01 bash
test (unconfined) 3591 pts/0 00:00:00 ps
2. if a task is confined by a stack of profiles that are unconfined
the output of label mode is again the incorrect value of (-) like
above, instead of (unconfined). This is because the visibile
profile count increment is skipped by the special casing of
unconfined.
Fixes: f1bd904175 ("apparmor: add the base fns() for domain labels")
Signed-off-by: John Johansen <john.johansen@canonical.com>
Currently apparmor_sk_clone_security() does not check for existing
label/peer in the 'new' struct sock; it just overwrites it, if any
(with another reference to the label of the source sock.)
static void apparmor_sk_clone_security(const struct sock *sk,
struct sock *newsk)
{
struct aa_sk_ctx *ctx = SK_CTX(sk);
struct aa_sk_ctx *new = SK_CTX(newsk);
new->label = aa_get_label(ctx->label);
new->peer = aa_get_label(ctx->peer);
}
This might leak label references, which might overflow under load.
Thus, check for and put labels, to prevent such errors.
Note this is similarly done on:
static int apparmor_socket_post_create(struct socket *sock, ...)
...
if (sock->sk) {
struct aa_sk_ctx *ctx = SK_CTX(sock->sk);
aa_put_label(ctx->label);
ctx->label = aa_get_label(label);
}
...
Context:
-------
The label reference count leak is observed if apparmor_sock_graft()
is called previously: this sets the 'ctx->label' field by getting
a reference to the current label (later overwritten, without put.)
static void apparmor_sock_graft(struct sock *sk, ...)
{
struct aa_sk_ctx *ctx = SK_CTX(sk);
if (!ctx->label)
ctx->label = aa_get_current_label();
}
And that is the case on crypto/af_alg.c:af_alg_accept():
int af_alg_accept(struct sock *sk, struct socket *newsock, ...)
...
struct sock *sk2;
...
sk2 = sk_alloc(...);
...
security_sock_graft(sk2, newsock);
security_sk_clone(sk, sk2);
...
Apparently both calls are done on their own right, especially for
other LSMs, being introduced in 2010/2014, before apparmor socket
mediation in 2017 (see commits [1,2,3,4]).
So, it looks OK there! Let's fix the reference leak in apparmor.
Test-case:
---------
Exercise that code path enough to overflow label reference count.
$ cat aa-refcnt-af_alg.c
#include <stdio.h>
#include <string.h>
#include <unistd.h>
#include <sys/socket.h>
#include <linux/if_alg.h>
int main() {
int sockfd;
struct sockaddr_alg sa;
/* Setup the crypto API socket */
sockfd = socket(AF_ALG, SOCK_SEQPACKET, 0);
if (sockfd < 0) {
perror("socket");
return 1;
}
memset(&sa, 0, sizeof(sa));
sa.salg_family = AF_ALG;
strcpy((char *) sa.salg_type, "rng");
strcpy((char *) sa.salg_name, "stdrng");
if (bind(sockfd, (struct sockaddr *) &sa, sizeof(sa)) < 0) {
perror("bind");
return 1;
}
/* Accept a "connection" and close it; repeat. */
while (!close(accept(sockfd, NULL, 0)));
return 0;
}
$ gcc -o aa-refcnt-af_alg aa-refcnt-af_alg.c
$ ./aa-refcnt-af_alg
<a few hours later>
[ 9928.475953] refcount_t overflow at apparmor_sk_clone_security+0x37/0x70 in aa-refcnt-af_alg[1322], uid/euid: 1000/1000
...
[ 9928.507443] RIP: 0010:apparmor_sk_clone_security+0x37/0x70
...
[ 9928.514286] security_sk_clone+0x33/0x50
[ 9928.514807] af_alg_accept+0x81/0x1c0 [af_alg]
[ 9928.516091] alg_accept+0x15/0x20 [af_alg]
[ 9928.516682] SYSC_accept4+0xff/0x210
[ 9928.519609] SyS_accept+0x10/0x20
[ 9928.520190] do_syscall_64+0x73/0x130
[ 9928.520808] entry_SYSCALL_64_after_hwframe+0x3d/0xa2
Note that other messages may be seen, not just overflow, depending on
the value being incremented by kref_get(); on another run:
[ 7273.182666] refcount_t: saturated; leaking memory.
...
[ 7273.185789] refcount_t: underflow; use-after-free.
Kprobes:
-------
Using kprobe events to monitor sk -> sk_security -> label -> count (kref):
Original v5.7 (one reference leak every iteration)
... (af_alg_accept+0x0/0x1c0) label=0xffff8a0f36c25eb0 label_refcnt=0x11fd2
... (af_alg_release_parent+0x0/0xd0) label=0xffff8a0f36c25eb0 label_refcnt=0x11fd4
... (af_alg_accept+0x0/0x1c0) label=0xffff8a0f36c25eb0 label_refcnt=0x11fd3
... (af_alg_release_parent+0x0/0xd0) label=0xffff8a0f36c25eb0 label_refcnt=0x11fd5
... (af_alg_accept+0x0/0x1c0) label=0xffff8a0f36c25eb0 label_refcnt=0x11fd4
... (af_alg_release_parent+0x0/0xd0) label=0xffff8a0f36c25eb0 label_refcnt=0x11fd6
Patched v5.7 (zero reference leak per iteration)
... (af_alg_accept+0x0/0x1c0) label=0xffff9ff376c25eb0 label_refcnt=0x593
... (af_alg_release_parent+0x0/0xd0) label=0xffff9ff376c25eb0 label_refcnt=0x594
... (af_alg_accept+0x0/0x1c0) label=0xffff9ff376c25eb0 label_refcnt=0x593
... (af_alg_release_parent+0x0/0xd0) label=0xffff9ff376c25eb0 label_refcnt=0x594
... (af_alg_accept+0x0/0x1c0) label=0xffff9ff376c25eb0 label_refcnt=0x593
... (af_alg_release_parent+0x0/0xd0) label=0xffff9ff376c25eb0 label_refcnt=0x594
Commits:
-------
[1] commit 507cad355f ("crypto: af_alg - Make sure sk_security is initialized on accept()ed sockets")
[2] commit 4c63f83c2c ("crypto: af_alg - properly label AF_ALG socket")
[3] commit 2acce6aa9f ("Networking") a.k.a ("crypto: af_alg - Avoid sock_graft call warning)
[4] commit 56974a6fcf ("apparmor: add base infastructure for socket mediation")
Fixes: 56974a6fcf ("apparmor: add base infastructure for socket mediation")
Reported-by: Brian Moyles <bmoyles@netflix.com>
Signed-off-by: Mauricio Faria de Oliveira <mfo@canonical.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
Here is the large set of char/misc driver patches for 5.8-rc1
Included in here are:
- habanalabs driver updates, loads
- mhi bus driver updates
- extcon driver updates
- clk driver updates (approved by the clock maintainer)
- firmware driver updates
- fpga driver updates
- gnss driver updates
- coresight driver updates
- interconnect driver updates
- parport driver updates (it's still alive!)
- nvmem driver updates
- soundwire driver updates
- visorbus driver updates
- w1 driver updates
- various misc driver updates
In short, loads of different driver subsystem updates along with the
drivers as well.
All have been in linux-next for a while with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXtzkHw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yldOwCgus/DgpnI1UL4z+NdBxJrAXtkPmgAn2sgTUea
i5RblCmcVMqvHaGtYkY+
=tScN
-----END PGP SIGNATURE-----
Merge tag 'char-misc-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver updates from Greg KH:
"Here is the large set of char/misc driver patches for 5.8-rc1
Included in here are:
- habanalabs driver updates, loads
- mhi bus driver updates
- extcon driver updates
- clk driver updates (approved by the clock maintainer)
- firmware driver updates
- fpga driver updates
- gnss driver updates
- coresight driver updates
- interconnect driver updates
- parport driver updates (it's still alive!)
- nvmem driver updates
- soundwire driver updates
- visorbus driver updates
- w1 driver updates
- various misc driver updates
In short, loads of different driver subsystem updates along with the
drivers as well.
All have been in linux-next for a while with no reported issues"
* tag 'char-misc-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (233 commits)
habanalabs: correctly cast u64 to void*
habanalabs: initialize variable to default value
extcon: arizona: Fix runtime PM imbalance on error
extcon: max14577: Add proper dt-compatible strings
extcon: adc-jack: Fix an error handling path in 'adc_jack_probe()'
extcon: remove redundant assignment to variable idx
w1: omap-hdq: print dev_err if irq flags are not cleared
w1: omap-hdq: fix interrupt handling which did show spurious timeouts
w1: omap-hdq: fix return value to be -1 if there is a timeout
w1: omap-hdq: cleanup to add missing newline for some dev_dbg
/dev/mem: Revoke mappings when a driver claims the region
misc: xilinx-sdfec: convert get_user_pages() --> pin_user_pages()
misc: xilinx-sdfec: cleanup return value in xsdfec_table_write()
misc: xilinx-sdfec: improve get_user_pages_fast() error handling
nvmem: qfprom: remove incorrect write support
habanalabs: handle MMU cache invalidation timeout
habanalabs: don't allow hard reset with open processes
habanalabs: GAUDI does not support soft-reset
habanalabs: add print for soft reset due to event
habanalabs: improve MMU cache invalidation code
...
Here is the set of driver core patches for 5.8-rc1.
Not all that huge this release, just a number of small fixes and
updates:
- software node fixes
- kobject now sends KOBJ_REMOVE when it is removed from sysfs,
not when it is removed from memory (which could come much
later)
- device link additions and fixes based on testing on more
devices
- firmware core cleanups
- other minor changes, full details in the shortlog
All have been in linux-next for a while with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXtzmXg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymaAQCfZZ9prH3AMLF7DIkG3vMw0njLXt0An2FxrKYU
wetHRG4KL9vTkdz7+TqU
=t5LE
-----END PGP SIGNATURE-----
Merge tag 'driver-core-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the set of driver core patches for 5.8-rc1.
Not all that huge this release, just a number of small fixes and
updates:
- software node fixes
- kobject now sends KOBJ_REMOVE when it is removed from sysfs, not
when it is removed from memory (which could come much later)
- device link additions and fixes based on testing on more devices
- firmware core cleanups
- other minor changes, full details in the shortlog
All have been in linux-next for a while with no reported issues"
* tag 'driver-core-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (23 commits)
driver core: Update device link status correctly for SYNC_STATE_ONLY links
firmware_loader: change enum fw_opt to u32
software node: implement software_node_unregister()
kobject: send KOBJ_REMOVE uevent when the object is removed from sysfs
driver core: Remove unnecessary is_fwnode_dev variable in device_add()
drivers property: When no children in primary, try secondary
driver core: platform: Fix spelling errors in platform.c
driver core: Remove check in driver_deferred_probe_force_trigger()
of: platform: Batch fwnode parsing when adding all top level devices
driver core: fw_devlink: Add support for batching fwnode parsing
driver core: Look for waiting consumers only for a fwnode's primary device
driver core: Move code to the right part of the file
Revert "Revert "driver core: Set fw_devlink to "permissive" behavior by default""
drivers: base: Fix NULL pointer exception in __platform_driver_probe() if a driver developer is foolish
firmware_loader: move fw_fallback_config to a private kernel symbol namespace
driver core: Add missing '\n' in log messages
driver/base/soc: Use kobj_to_dev() API
Add documentation on meaning of -EPROBE_DEFER
driver core: platform: remove redundant assignment to variable ret
debugfs: Use the correct style for SPDX License Identifier
...
Here is the large set of staging and IIO driver changes for 5.8-rc1
Nothing major, but a lot of new IIO drivers are included in here, along
with other core iio cleanups and changes.
On the staging driver front, again, nothing noticable. No new deletions
or additions, just a ton of tiny cleanups all over the tree done by a
lot of different people. Most coding style, but many actual real fixes
and cleanups that are nice to see.
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXtzoAQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ym9FwCgkW8WZJGnvHLjuuG8C01azCEh/KUAoJRji8jK
4zCG8NxAPFsQ1QP2SZPq
=jEyw
-----END PGP SIGNATURE-----
Merge tag 'staging-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging/IIO driver updates from Greg KH:
"Here is the large set of staging and IIO driver changes for 5.8-rc1
Nothing major, but a lot of new IIO drivers are included in here,
along with other core iio cleanups and changes.
On the staging driver front, again, nothing noticable. No new
deletions or additions, just a ton of tiny cleanups all over the tree
done by a lot of different people. Most coding style, but many actual
real fixes and cleanups that are nice to see.
All of these have been in linux-next for a while with no reported
issues"
* tag 'staging-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (618 commits)
staging: rtl8723bs: Use common packet header constants
staging: sm750fb: Add names to proc_setBLANK args
staging: most: usb: init return value in default path of switch/case expression
staging: vchiq: Get rid of VCHIQ_SERVICE_OPENEND callback reason
staging: vchiq: move vchiq_release_message() into vchiq
staging: vchi: Get rid of C++ guards
staging: vchi: Get rid of not implemented function declarations
staging: vchi: Get rid of vchiq_status_to_vchi()
staging: vchi: Get rid of vchi_service_set_option()
staging: vchi: Merge vchi_msg_queue() into vchi_queue_kernel_message()
staging: vchiq: Move copy callback handling into vchiq
staging: vchi: Get rid of vchi_queue_user_message()
staging: vchi: Get rid of vchi_service_destroy()
staging: most: usb: use function sysfs_streq
staging: most: usb: add missing put_device calls
staging: most: usb: use correct error codes
staging: most: usb: replace code to calculate array index
staging: most: usb: don't use error path to exit function on success
staging: most: usb: move allocation of URB out of critical section
staging: most: usb: return 0 instead of variable
...
Here is the tty and serial driver updates for 5.8-rc1
Nothing huge at all, just a lot of little serial driver fixes, updates
for new devices and features, and other small things. Full details are
in the shortlog.
Note, you will get a conflict merging with your tree in the
Documentation/devicetree/bindings/serial/rs485.yaml file, but it should
be pretty obvious what to do. If not, I'm sure Rob will clean it all up
afterwards :)
All of these have been in linux-next with no issues for a while.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXtzpCg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylRxACgjGtOKPjahONL4lWd0F8ZYEcyw7sAn34woBCO
BDUV3kolrRQ4OYNJWsHP
=TvqG
-----END PGP SIGNATURE-----
Merge tag 'tty-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial driver updates from Greg KH:
"Here is the tty and serial driver updates for 5.8-rc1
Nothing huge at all, just a lot of little serial driver fixes, updates
for new devices and features, and other small things. Full details are
in the shortlog.
All of these have been in linux-next with no issues for a while"
* tag 'tty-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (67 commits)
tty: serial: qcom_geni_serial: Add 51.2MHz frequency support
tty: serial: imx: clear Ageing Timer Interrupt in handler
serial: 8250_fintek: Add F81966 Support
sc16is7xx: Add flag to activate IrDA mode
dt-bindings: sc16is7xx: Add flag to activate IrDA mode
serial: 8250: Support rs485 bus termination GPIO
serial: 8520_port: Fix function param documentation
dt-bindings: serial: Add binding for rs485 bus termination GPIO
vt: keyboard: avoid signed integer overflow in k_ascii
serial: 8250: Enable 16550A variants by default on non-x86
tty: hvc_console, fix crashes on parallel open/close
serial: imx: Initialize lock for non-registered console
sc16is7xx: Read the LSR register for basic device presence check
sc16is7xx: Allow sharing the IRQ line
sc16is7xx: Use threaded IRQ
sc16is7xx: Always use falling edge IRQ
tty: n_gsm: Fix bogus i++ in gsm_data_kick
tty: n_gsm: Remove unnecessary test in gsm_print_packet()
serial: stm32: add no_console_suspend support
tty: serial: fsl_lpuart: Use __maybe_unused instead of #if CONFIG_PM_SLEEP
...
Here are the large set of USB and PHY driver updates for 5.8-rc1.
Nothing huge, just lots of little things:
- USB gadget fixes and additions all over the place
- new PHY drivers
- PHY driver fixes and updates
- XHCI driver updates
- musb driver updates
- more USB-serial driver ids added
- various USB quirks added
- thunderbolt minor updates and fixes
- typec updates and additions
Full details are in the shortlog.
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXtzqVA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynftwCfeanyI6TR5AdfJVZN50B6/ySvVwcAn07i9VRX
tnt2kz0UqReYpLt0wyJ7
=YP7o
-----END PGP SIGNATURE-----
Merge tag 'usb-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB/PHY driver updates from Greg KH:
"Here are the large set of USB and PHY driver updates for 5.8-rc1.
Nothing huge, just lots of little things:
- USB gadget fixes and additions all over the place
- new PHY drivers
- PHY driver fixes and updates
- XHCI driver updates
- musb driver updates
- more USB-serial driver ids added
- various USB quirks added
- thunderbolt minor updates and fixes
- typec updates and additions
All of these have been in linux-next for a while with no reported
issues"
* tag 'usb-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (245 commits)
usb: dwc3: meson-g12a: fix USB2 PHY initialization on G12A and A1 SoCs
usb: dwc3: meson-g12a: fix error path when fetching the reset line fails
Revert "dt-bindings: usb: qcom,dwc3: Convert USB DWC3 bindings"
Revert "dt-bindings: usb: qcom,dwc3: Add compatible for SC7180"
Revert "dt-bindings: usb: qcom,dwc3: Introduce interconnect properties for Qualcomm DWC3 driver"
USB: serial: ch341: fix lockup of devices with limited prescaler
USB: serial: ch341: add basis for quirk detection
CDC-ACM: heed quirk also in error handling
USB: serial: option: add Telit LE910C1-EUX compositions
usb: musb: Fix runtime PM imbalance on error
usb: musb: jz4740: Prevent lockup when CONFIG_SMP is set
usb: musb: mediatek: add reset FADDR to zero in reset interrupt handle
usb: musb: use true for 'use_dma'
usb: musb: start session in resume for host port
usb: musb: return -ESHUTDOWN in urb when three-strikes error happened
USB: serial: qcserial: add DW5816e QDL support
thunderbolt: Add trivial .shutdown
usb: dwc3: keystone: Turn on USB3 PHY before controller
dt-bindings: usb: ti,keystone-dwc3.yaml: Add USB3.0 PHY property
dt-bindings: usb: convert keystone-usb.txt to YAML
...
lost npc in PTRACE_SETREGSET, breaking PTRACE_SETREGS as well
Fixes: cf51e129b9 "sparc32: fix register window handling in genregs32_[gs]et()"
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
When the PHY's strap register is read to determine if lane swapping is
needed the phy_read_mmd returns the value back into the ret variable.
If the call to read the strap fails the failed value is returned. If
the call to read the strap is successful then ret is possibly set to a
non-zero positive number. Without reseting the ret value to 0 this will
cause the parse DT function to return a failure.
Fixes: c4566aec6e ("net: phy: dp83869: Update port-mirroring to read straps")
Signed-off-by: Dan Murphy <dmurphy@ti.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch replaces some unnecessary uses of rcu_dereference_raw
in the rhashtable code with rcu_dereference_protected.
The top-level nested table entry is only marked as RCU because it
shares the same type as the tree entries underneath it. So it
doesn't need any RCU protection.
We also don't need RCU protection when we're freeing a nested RCU
table because by this stage we've long passed a memory barrier
when anyone could change the nested table.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
- allow only 'config', 'comment', 'if' statements inside 'choice' since
the other statements are not sensible inside 'choice' and should be
grammatical error
- support LMC_KEEP env variable for 'make local{yes,mod}config' to
preserve some CONFIG options
- deprecate 'make kvmconfig' and 'make xenconfig' in favor of
'make kvm_guest.config' and 'make xen.config'
- code cleanups
-----BEGIN PGP SIGNATURE-----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=FlOD
-----END PGP SIGNATURE-----
Merge tag 'kconfig-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kconfig updates from Masahiro Yamada:
- allow only 'config', 'comment', 'if' statements inside 'choice' since
the other statements are not sensible inside 'choice' and should be
grammatical error
- support LMC_KEEP env variable for 'make local{yes,mod}config' to
preserve some CONFIG options
- deprecate 'make kvmconfig' and 'make xenconfig' in favor of
'make kvm_guest.config' and 'make xen.config'
- code cleanups
* tag 'kconfig-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kconfig: announce removal of 'kvmconfig' and 'xenconfig' shorthands
streamline_config.pl: add LMC_KEEP to preserve some kconfigs
kconfig: allow only 'config', 'comment', and 'if' inside 'choice'
kconfig: tests: remove randconfig test for choice in choice
kconfig: do not assign a variable in the return statement
kconfig: do not use OR-assignment for zero-cleared structure
- fix warnings in 'make clean' for ARCH=um, hexagon, h8300, unicore32
- ensure to rebuild all objects when the compiler is upgraded
- exclude system headers from dependency tracking and fixdep processing
- fix potential bit-size mismatch between the kernel and BPF user-mode
helper
- add the new syntax 'userprogs' to build user-space programs for the
target architecture (the same arch as the kernel)
- compile user-space sample code under samples/ for the target arch
instead of the host arch
- make headers_install fail if a CONFIG option is leaked to user-space
- sanitize the output format of scripts/checkstack.pl
- handle ARM 'push' instruction in scripts/checkstack.pl
- error out before modpost if a module name conflict is found
- error out when multiple directories are passed to M= because this
feature is broken for a long time
- add CONFIG_DEBUG_INFO_COMPRESSED to support compressed debug info
- a lot of cleanups of modpost
- dump vmlinux symbols out into vmlinux.symvers, and reuse it in the
second pass of modpost
- do not run the second pass of modpost if nothing in modules is updated
- install modules.builtin(.modinfo) by 'make install' as well as by
'make modules_install' because it is useful even when CONFIG_MODULES=n
- add new command line variables, GZIP, BZIP2, LZOP, LZMA, LZ4, and XZ
to allow users to use alternatives such as pigz, pbzip2, etc.
-----BEGIN PGP SIGNATURE-----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=GKe5
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- fix warnings in 'make clean' for ARCH=um, hexagon, h8300, unicore32
- ensure to rebuild all objects when the compiler is upgraded
- exclude system headers from dependency tracking and fixdep processing
- fix potential bit-size mismatch between the kernel and BPF user-mode
helper
- add the new syntax 'userprogs' to build user-space programs for the
target architecture (the same arch as the kernel)
- compile user-space sample code under samples/ for the target arch
instead of the host arch
- make headers_install fail if a CONFIG option is leaked to user-space
- sanitize the output format of scripts/checkstack.pl
- handle ARM 'push' instruction in scripts/checkstack.pl
- error out before modpost if a module name conflict is found
- error out when multiple directories are passed to M= because this
feature is broken for a long time
- add CONFIG_DEBUG_INFO_COMPRESSED to support compressed debug info
- a lot of cleanups of modpost
- dump vmlinux symbols out into vmlinux.symvers, and reuse it in the
second pass of modpost
- do not run the second pass of modpost if nothing in modules is
updated
- install modules.builtin(.modinfo) by 'make install' as well as by
'make modules_install' because it is useful even when
CONFIG_MODULES=n
- add new command line variables, GZIP, BZIP2, LZOP, LZMA, LZ4, and XZ
to allow users to use alternatives such as pigz, pbzip2, etc.
* tag 'kbuild-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (96 commits)
kbuild: add variables for compression tools
Makefile: install modules.builtin even if CONFIG_MODULES=n
mksysmap: Fix the mismatch of '.L' symbols in System.map
kbuild: doc: rename LDFLAGS to KBUILD_LDFLAGS
modpost: change elf_info->size to size_t
modpost: remove is_vmlinux() helper
modpost: strip .o from modname before calling new_module()
modpost: set have_vmlinux in new_module()
modpost: remove mod->skip struct member
modpost: add mod->is_vmlinux struct member
modpost: remove is_vmlinux() call in check_for_{gpl_usage,unused}()
modpost: remove mod->is_dot_o struct member
modpost: move -d option in scripts/Makefile.modpost
modpost: remove -s option
modpost: remove get_next_text() and make {grab,release_}file static
modpost: use read_text_file() and get_line() for reading text files
modpost: avoid false-positive file open error
modpost: fix potential mmap'ed file overrun in get_src_version()
modpost: add read_text_file() and get_line() helpers
modpost: do not call get_modinfo() for vmlinux(.o)
...
- add DMA mapping helpers for struct sg_table (Marek Szyprowski)
-----BEGIN PGP SIGNATURE-----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=LLjY
-----END PGP SIGNATURE-----
Merge tag 'dma-mapping-5.8-2' of git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping helpers from Christoph Hellwig:
"These were in a separate stable branch so that various media and drm
trees could pull the in for bug fixes, but looking at linux-next that
hasn't actually happened yet. Still sending the APIs to you in the
hope that these bug fixes get picked up for 5.8 in one way or another.
Summary:
- add DMA mapping helpers for struct sg_table (Marek Szyprowski)"
* tag 'dma-mapping-5.8-2' of git://git.infradead.org/users/hch/dma-mapping:
iommu: add generic helper for mapping sgtable objects
scatterlist: add generic wrappers for iterating over sgtable objects
dma-mapping: add generic helpers for mapping sgtable objects
- enhance the dma pool to allow atomic allocation on x86 with AMD SEV
(David Rientjes)
- two small cleanups (Jason Yan and Peter Collingbourne)
-----BEGIN PGP SIGNATURE-----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=GT3J
-----END PGP SIGNATURE-----
Merge tag 'dma-mapping-5.8' of git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping updates from Christoph Hellwig:
- enhance the dma pool to allow atomic allocation on x86 with AMD SEV
(David Rientjes)
- two small cleanups (Jason Yan and Peter Collingbourne)
* tag 'dma-mapping-5.8' of git://git.infradead.org/users/hch/dma-mapping:
dma-contiguous: fix comment for dma_release_from_contiguous
dma-pool: scale the default DMA coherent pool size with memory capacity
x86/mm: unencrypted non-blocking DMA allocations use coherent pools
dma-pool: add pool sizes to debugfs
dma-direct: atomic allocations must come from atomic coherent pools
dma-pool: dynamically expanding atomic pools
dma-pool: add additional coherent pools to map to gfp mask
dma-remap: separate DMA atomic pools from direct remap code
dma-debug: make __dma_entry_alloc_check_leak() static
Pull workqueue updates from Tejun Heo:
"Mostly cleanups and other trivial changes.
The only interesting change is Sebastian's rcuwait conversion for RT"
* 'for-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
workqueue: use BUILD_BUG_ON() for compile time test instead of WARN_ON()
workqueue: fix a piece of comment about reserved bits for work flags
workqueue: remove useless unlock() and lock() in series
workqueue: void unneeded requeuing the pwq in rescuer thread
workqueue: Convert the pool::lock and wq_mayday_lock to raw_spinlock_t
workqueue: Use rcuwait for wq_manager_wait
workqueue: Remove unnecessary kfree() call in rcu_free_wq()
workqueue: Fix an use after free in init_rescuer()
workqueue: Use IS_ERR and PTR_ERR instead of PTR_ERR_OR_ZERO.
Pull cgroup updates from Tejun Heo:
"Just two patches: one to add system-level cpu.stat to the root cgroup
for convenience and a trivial comment update"
* 'for-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cgroup: add cpu.stat file to root cgroup
cgroup: Remove stale comments
-----BEGIN PGP SIGNATURE-----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=G3xj
-----END PGP SIGNATURE-----
Merge tag 'integrity-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity
Pull integrity updates from Mimi Zohar:
"The main changes are extending the TPM 2.0 PCR banks with bank
specific file hashes, calculating the "boot_aggregate" based on other
TPM PCR banks, using the default IMA hash algorithm, instead of SHA1,
as the basis for the cache hash table key, and preventing the mprotect
syscall to circumvent an IMA mmap appraise policy rule.
- In preparation for extending TPM 2.0 PCR banks with bank specific
digests, commit 0b6cf6b97b ("tpm: pass an array of
tpm_extend_digest structures to tpm_pcr_extend()") modified
tpm_pcr_extend(). The original SHA1 file digests were
padded/truncated, before being extended into the other TPM PCR
banks. This pull request calculates and extends the TPM PCR banks
with bank specific file hashes completing the above change.
- The "boot_aggregate", the first IMA measurement list record, is the
"trusted boot" link between the pre-boot environment and the
running OS. With TPM 2.0, the "boot_aggregate" record is not
limited to being based on the SHA1 TPM PCR bank, but can be
calculated based on any enabled bank, assuming the hash algorithm
is also enabled in the kernel.
Other changes include the following and five other bug fixes/code
clean up:
- supporting both a SHA1 and a larger "boot_aggregate" digest in a
custom template format containing both the the SHA1 ('d') and
larger digests ('d-ng') fields.
- Initial hash table key fix, but additional changes would be good"
* tag 'integrity-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity:
ima: Directly free *entry in ima_alloc_init_template() if digests is NULL
ima: Call ima_calc_boot_aggregate() in ima_eventdigest_init()
ima: Directly assign the ima_default_policy pointer to ima_rules
ima: verify mprotect change is consistent with mmap policy
evm: Fix possible memory leak in evm_calc_hmac_or_hash()
ima: Set again build_ima_appraise variable
ima: Remove redundant policy rule set in add_rules()
ima: Fix ima digest hash table key calculation
ima: Use ima_hash_algo for collision detection in the measurement list
ima: Calculate and extend PCR with digests in ima_template_entry
ima: Allocate and initialize tfm for each PCR bank
ima: Switch to dynamically allocated buffer for template digests
ima: Store template digest directly in ima_template_entry
ima: Evaluate error in init_ima()
ima: Switch to ima_hash_algo for boot aggregate
Allow user to use alternative implementations of compression tools,
such as pigz, pbzip2, pxz. For example, multi-threaded tools to
speed up the build:
$ make GZIP=pigz BZIP2=pbzip2
Variables _GZIP, _BZIP2, _LZOP are used internally because original env
vars are reserved by the tools. The use of GZIP in gzip tool is obsolete
since 2015. However, alternative implementations (e.g., pigz) still rely
on it. BZIP2, BZIP, LZOP vars are not obsolescent.
The credit goes to @grsecurity.
As a sidenote, for multi-threaded lzma, xz compression one can use:
$ export XZ_OPT="--threads=0"
Signed-off-by: Denis Efremov <efremov@linux.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Many applications check for available kernel features via:
- /proc/modules (loaded modules, present if CONFIG_MODULES=y)
- $(MODLIB)/modules.builtin (builtin modules)
They fail to detect features if the kernel was built with CONFIG_MODULES=n
and modules.builtin isn't installed.
Therefore, add the target "_builtin_inst_" and make "install" and
"modules_install" depend on it.
Tests results:
- make install: kernel image is copied as before, modules.builtin copied
- make modules_install: (CONFIG_MODULES=n) nothing is copied, exit 1
Signed-off-by: Jonas Zeiger <jonas.zeiger@talpidae.net>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
When System.map was generated, the kernel used mksysmap to
filter the kernel symbols, but all the symbols with the
second letter 'L' in the kernel were filtered out, not just
the symbols starting with 'dot + L'.
For example:
ashimida@ubuntu:~/linux$ cat System.map |grep ' .L'
ashimida@ubuntu:~/linux$ nm -n vmlinux |grep ' .L'
ffff0000088028e0 t bLength_show
......
ffff0000092e0408 b PLLP_OUTC_lock
ffff0000092e0410 b PLLP_OUTA_lock
The original intent should be to filter out all local symbols
starting with '.L', so the dot should be escaped.
Fixes: 00902e9847 ("mksysmap: Add h8300 local symbol pattern")
Signed-off-by: ashimida <ashimida@linux.alibaba.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Now that is_vmlinux() is called only in new_module(), we can inline
the function call.
modname is the basename with '.o' is stripped. No need to compare it
with 'vmlinux.o'.
vmlinux is always located at the current working directory. No need
to strip the directory path.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
new_module() conditionally strips the .o because the modname has .o
suffix when it is called from read_symbols(), but no .o when it is
called from read_dump().
It is clearer to strip .o in read_symbols().
I also used flexible-array for mod->name.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
The meaning of 'skip' is obscure since it does not explain
"what to skip".
mod->skip is set when it is vmlinux or the module info came from
a dump file.
So, mod->skip is equivalent to (mod->is_vmlinux || mod->from_dump).
For the check in write_namespace_deps_files(), mod->is_vmlinux is
unneeded because the -d option is not passed in the first pass of
modpost.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
is_vmlinux() is called in several places to check whether the current
module is vmlinux or not.
It is faster and clearer to check mod->is_vmlinux flag.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
check_exports() is never called for vmlinux because mod->skip is set
for vmlinux.
Hence, check_for_gpl_usage() and check_for_unused() are not called
for vmlinux, either. is_vmlinux() is always false here.
Remove the is_vmlinux() calls, and hard-code the ".ko" suffix.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
