Stefan Schmidt says:
====================
pull-request: ieee802154 for net 2019-09-28
An update from ieee802154 for your *net* tree.
Three driver fixes. Navid Emamdoost fixed a memory leak on an error
path in the ca8210 driver, Johan Hovold fixed a use-after-free found
by syzbot in the atusb driver and Christophe JAILLET makes sure
__skb_put_data is used instead of memcpy in the mcr20a driver
I switched from branches to tags here to be pulled from. So far not
annotated and not signed. Once I fixed my scripts it should contain
this messages as annotations. If you want it signed as well just tell
me. If there are any problems let me know.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The "reuse->sock[]" array is shared by multiple sockets. The going away
sk must unpublish itself from "reuse->sock[]" before making call_rcu()
call. However, this unpublish-action is currently done after a grace
period and it may cause use-after-free.
The fix is to move reuseport_detach_sock() to sk_destruct().
Due to the above reason, any socket with sk_reuseport_cb has
to go through the rcu grace period before freeing it.
It is a rather old bug (~3 yrs). The Fixes tag is not necessary
the right commit but it is the one that introduced the SOCK_RCU_FREE
logic and this fix is depending on it.
Fixes: a4298e4522 ("net: add SOCK_RCU_FREE socket flag")
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Suggested-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
erspan driver calls ether_setup(), after commit 61e84623ac
("net: centralize net_device min/max MTU checking"), the range
of mtu is [min_mtu, max_mtu], which is [68, 1500] by default.
It causes the dev mtu of the erspan device to not be greater
than 1500, this limit value is not correct for ipgre tap device.
Tested:
Before patch:
# ip link set erspan0 mtu 1600
Error: mtu greater than device maximum.
After patch:
# ip link set erspan0 mtu 1600
# ip -d link show erspan0
21: erspan0@NONE: <BROADCAST,MULTICAST> mtu 1600 qdisc noop state DOWN
mode DEFAULT group default qlen 1000
link/ether 00:00:00:00:00:00 brd ff:ff:ff:ff:ff:ff promiscuity 0 minmtu 68 maxmtu 0
Fixes: 61e84623ac ("net: centralize net_device min/max MTU checking")
Signed-off-by: Haishuang Yan <yanhaishuang@cmss.chinamobile.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The QCA8K family supports up to 7 ports. So use the existing
QCA8K_NUM_PORTS define to allocate the switch structure and limit all
operations with the switch ports.
This was not an issue until commit 0394a63acf ("net: dsa: enable and
disable all ports") disabled all unused ports. Since the unused ports 7-11
are outside of the correct register range on this switch some registers
were rewritten with invalid content.
Fixes: 6b93fb4648 ("net-next: dsa: add new driver for qca8xxx family")
Fixes: a0c02161ec ("net: dsa: variable number of ports")
Fixes: 0394a63acf ("net: dsa: enable and disable all ports")
Signed-off-by: Michal Vokáč <michal.vokac@ysoft.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull networking fixes from David Miller:
1) Sanity check URB networking device parameters to avoid divide by
zero, from Oliver Neukum.
2) Disable global multicast filter in NCSI, otherwise LLDP and IPV6
don't work properly. Longer term this needs a better fix tho. From
Vijay Khemka.
3) Small fixes to selftests (use ping when ping6 is not present, etc.)
from David Ahern.
4) Bring back rt_uses_gateway member of struct rtable, it's semantics
were not well understood and trying to remove it broke things. From
David Ahern.
5) Move usbnet snaity checking, ignore endpoints with invalid
wMaxPacketSize. From Bjørn Mork.
6) Missing Kconfig deps for sja1105 driver, from Mao Wenan.
7) Various small fixes to the mlx5 DR steering code, from Alaa Hleihel,
Alex Vesker, and Yevgeny Kliteynik
8) Missing CAP_NET_RAW checks in various places, from Ori Nimron.
9) Fix crash when removing sch_cbs entry while offloading is enabled,
from Vinicius Costa Gomes.
10) Signedness bug fixes, generally in looking at the result given by
of_get_phy_mode() and friends. From Dan Crapenter.
11) Disable preemption around BPF_PROG_RUN() calls, from Eric Dumazet.
12) Don't create VRF ipv6 rules if ipv6 is disabled, from David Ahern.
13) Fix quantization code in tcp_bbr, from Kevin Yang.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (127 commits)
net: tap: clean up an indentation issue
nfp: abm: fix memory leak in nfp_abm_u32_knode_replace
tcp: better handle TCP_USER_TIMEOUT in SYN_SENT state
sk_buff: drop all skb extensions on free and skb scrubbing
tcp_bbr: fix quantization code to not raise cwnd if not probing bandwidth
mlxsw: spectrum_flower: Fail in case user specifies multiple mirror actions
Documentation: Clarify trap's description
mlxsw: spectrum: Clear VLAN filters during port initialization
net: ena: clean up indentation issue
NFC: st95hf: clean up indentation issue
net: phy: micrel: add Asym Pause workaround for KSZ9021
net: socionext: ave: Avoid using netdev_err() before calling register_netdev()
ptp: correctly disable flags on old ioctls
lib: dimlib: fix help text typos
net: dsa: microchip: Always set regmap stride to 1
nfp: flower: fix memory leak in nfp_flower_spawn_vnic_reprs
nfp: flower: prevent memory leak in nfp_flower_spawn_phy_reprs
net/sched: Set default of CONFIG_NET_TC_SKB_EXT to N
vrf: Do not attempt to create IPv6 mcast rule if IPv6 is disabled
net: sched: sch_sfb: don't call qdisc_put() while holding tree lock
...
Merge hugepage allocation updates from David Rientjes:
"We (mostly Linus, Andrea, and myself) have been discussing offlist how
to implement a sane default allocation strategy for hugepages on NUMA
platforms.
With these reverts in place, the page allocator will happily allocate
a remote hugepage immediately rather than try to make a local hugepage
available. This incurs a substantial performance degradation when
memory compaction would have otherwise made a local hugepage
available.
This series reverts those reverts and attempts to propose a more sane
default allocation strategy specifically for hugepages. Andrea
acknowledges this is likely to fix the swap storms that he originally
reported that resulted in the patches that removed __GFP_THISNODE from
hugepage allocations.
The immediate goal is to return 5.3 to the behavior the kernel has
implemented over the past several years so that remote hugepages are
not immediately allocated when local hugepages could have been made
available because the increased access latency is untenable.
The next goal is to introduce a sane default allocation strategy for
hugepages allocations in general regardless of the configuration of
the system so that we prevent thrashing of local memory when
compaction is unlikely to succeed and can prefer remote hugepages over
remote native pages when the local node is low on memory."
Note on timing: this reverts the hugepage VM behavior changes that got
introduced fairly late in the 5.3 cycle, and that fixed a huge
performance regression for certain loads that had been around since
4.18.
Andrea had this note:
"The regression of 4.18 was that it was taking hours to start a VM
where 3.10 was only taking a few seconds, I reported all the details
on lkml when it was finally tracked down in August 2018.
https://lore.kernel.org/linux-mm/20180820032640.9896-2-aarcange@redhat.com/
__GFP_THISNODE in MADV_HUGEPAGE made the above enterprise vfio
workload degrade like in the "current upstream" above. And it still
would have been that bad as above until 5.3-rc5"
where the bad behavior ends up happening as you fill up a local node,
and without that change, you'd get into the nasty swap storm behavior
due to compaction working overtime to make room for more memory on the
nodes.
As a result 5.3 got the two performance fix reverts in rc5.
However, David Rientjes then noted that those performance fixes in turn
regressed performance for other loads - although not quite to the same
degree. He suggested reverting the reverts and instead replacing them
with two small changes to how hugepage allocations are done (patch
descriptions rephrased by me):
- "avoid expensive reclaim when compaction may not succeed": just admit
that the allocation failed when you're trying to allocate a huge-page
and compaction wasn't successful.
- "allow hugepage fallback to remote nodes when madvised": when that
node-local huge-page allocation failed, retry without forcing the
local node.
but by then I judged it too late to replace the fixes for a 5.3 release.
So 5.3 was released with behavior that harked back to the pre-4.18 logic.
But now we're in the merge window for 5.4, and we can see if this
alternate model fixes not just the horrendous swap storm behavior, but
also restores the performance regression that the late reverts caused.
Fingers crossed.
* emailed patches from David Rientjes <rientjes@google.com>:
mm, page_alloc: allow hugepage fallback to remote nodes when madvised
mm, page_alloc: avoid expensive reclaim when compaction may not succeed
Revert "Revert "Revert "mm, thp: consolidate THP gfp handling into alloc_hugepage_direct_gfpmask""
Revert "Revert "mm, thp: restore node-local hugepage allocations""
For systems configured to always try hard to allocate transparent
hugepages (thp defrag setting of "always") or for memory that has been
explicitly madvised to MADV_HUGEPAGE, it is often better to fallback to
remote memory to allocate the hugepage if the local allocation fails
first.
The point is to allow the initial call to __alloc_pages_node() to attempt
to defragment local memory to make a hugepage available, if possible,
rather than immediately fallback to remote memory. Local hugepages will
always have a better access latency than remote (huge)pages, so an attempt
to make a hugepage available locally is always preferred.
If memory compaction cannot be successful locally, however, it is likely
better to fallback to remote memory. This could take on two forms: either
allow immediate fallback to remote memory or do per-zone watermark checks.
It would be possible to fallback only when per-zone watermarks fail for
order-0 memory, since that would require local reclaim for all subsequent
faults so remote huge allocation is likely better than thrashing the local
zone for large workloads.
In this case, it is assumed that because the system is configured to try
hard to allocate hugepages or the vma is advised to explicitly want to try
hard for hugepages that remote allocation is better when local allocation
and memory compaction have both failed.
Signed-off-by: David Rientjes <rientjes@google.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Stefan Priebe - Profihost AG <s.priebe@profihost.ag>
Cc: "Kirill A. Shutemov" <kirill@shutemov.name>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Memory compaction has a couple significant drawbacks as the allocation
order increases, specifically:
- isolate_freepages() is responsible for finding free pages to use as
migration targets and is implemented as a linear scan of memory
starting at the end of a zone,
- failing order-0 watermark checks in memory compaction does not account
for how far below the watermarks the zone actually is: to enable
migration, there must be *some* free memory available. Per the above,
watermarks are not always suffficient if isolate_freepages() cannot
find the free memory but it could require hundreds of MBs of reclaim to
even reach this threshold (read: potentially very expensive reclaim with
no indication compaction can be successful), and
- if compaction at this order has failed recently so that it does not even
run as a result of deferred compaction, looping through reclaim can often
be pointless.
For hugepage allocations, these are quite substantial drawbacks because
these are very high order allocations (order-9 on x86) and falling back to
doing reclaim can potentially be *very* expensive without any indication
that compaction would even be successful.
Reclaim itself is unlikely to free entire pageblocks and certainly no
reliance should be put on it to do so in isolation (recall lumpy reclaim).
This means we should avoid reclaim and simply fail hugepage allocation if
compaction is deferred.
It is also not helpful to thrash a zone by doing excessive reclaim if
compaction may not be able to access that memory. If order-0 watermarks
fail and the allocation order is sufficiently large, it is likely better
to fail the allocation rather than thrashing the zone.
Signed-off-by: David Rientjes <rientjes@google.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Stefan Priebe - Profihost AG <s.priebe@profihost.ag>
Cc: "Kirill A. Shutemov" <kirill@shutemov.name>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This reverts commit 92717d429b.
Since commit a8282608c8 ("Revert "mm, thp: restore node-local hugepage
allocations"") is reverted in this series, it is better to restore the
previous 5.2 behavior between the thp allocation and the page allocator
rather than to attempt any consolidation or cleanup for a policy that is
now reverted. It's less risky during an rc cycle and subsequent patches
in this series further modify the same policy that the pre-5.3 behavior
implements.
Consolidation and cleanup can be done subsequent to a sane default page
allocation strategy, so this patch reverts a cleanup done on a strategy
that is now reverted and thus is the least risky option.
Signed-off-by: David Rientjes <rientjes@google.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Stefan Priebe - Profihost AG <s.priebe@profihost.ag>
Cc: "Kirill A. Shutemov" <kirill@shutemov.name>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This reverts commit a8282608c8.
The commit references the original intended semantic for MADV_HUGEPAGE
which has subsequently taken on three unique purposes:
- enables or disables thp for a range of memory depending on the system's
config (is thp "enabled" set to "always" or "madvise"),
- determines the synchronous compaction behavior for thp allocations at
fault (is thp "defrag" set to "always", "defer+madvise", or "madvise"),
and
- reverts a previous MADV_NOHUGEPAGE (there is no madvise mode to only
clear previous hugepage advice).
These are the three purposes that currently exist in 5.2 and over the
past several years that userspace has been written around. Adding a
NUMA locality preference adds a fourth dimension to an already conflated
advice mode.
Based on the semantic that MADV_HUGEPAGE has provided over the past
several years, there exist workloads that use the tunable based on these
principles: specifically that the allocation should attempt to
defragment a local node before falling back. It is agreed that remote
hugepages typically (but not always) have a better access latency than
remote native pages, although on Naples this is at parity for
intersocket.
The revert commit that this patch reverts allows hugepage allocation to
immediately allocate remotely when local memory is fragmented. This is
contrary to the semantic of MADV_HUGEPAGE over the past several years:
that is, memory compaction should be attempted locally before falling
back.
The performance degradation of remote hugepages over local hugepages on
Rome, for example, is 53.5% increased access latency. For this reason,
the goal is to revert back to the 5.2 and previous behavior that would
attempt local defragmentation before falling back. With the patch that
is reverted by this patch, we see performance degradations at the tail
because the allocator happily allocates the remote hugepage rather than
even attempting to make a local hugepage available.
zone_reclaim_mode is not a solution to this problem since it does not
only impact hugepage allocations but rather changes the memory
allocation strategy for *all* page allocations.
Signed-off-by: David Rientjes <rientjes@google.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Stefan Priebe - Profihost AG <s.priebe@profihost.ag>
Cc: "Kirill A. Shutemov" <kirill@shutemov.name>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
An assortment of fixes that were either missed by me, or didn't arrive quite in
time for the first v5.4 pull.
Most notable is a fix for an issue with tlbie (broadcast TLB invalidation) on
Power9, when using the Radix MMU. The tlbie can race with an mtpid (move to PID
register, essentially MMU context switch) on another thread of the core, which
can cause stores to continue to go to a page after it's unmapped.
A fix in our KVM code to add a missing barrier, the lack of which has been
observed to cause missed IPIs and subsequently stuck CPUs in the host.
A change to the way we initialise PCR (Processor Compatibility Register) to make
it forward compatible with future CPUs.
On some older PowerVM systems our H_BLOCK_REMOVE support could oops, fix it to
detect such systems and fallback to the old invalidation method.
A fix for an oops seen on some machines when using KASAN on 32-bit.
A handful of other minor fixes, and two new selftests.
Thanks to:
Alistair Popple, Aneesh Kumar K.V, Christophe Leroy, Gustavo Romero, Joel
Stanley, Jordan Niethe, Laurent Dufour, Michael Roth, Oliver O'Halloran.
-----BEGIN PGP SIGNATURE-----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=dF42
-----END PGP SIGNATURE-----
Merge tag 'powerpc-5.4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
"An assortment of fixes that were either missed by me, or didn't arrive
quite in time for the first v5.4 pull.
- Most notable is a fix for an issue with tlbie (broadcast TLB
invalidation) on Power9, when using the Radix MMU. The tlbie can
race with an mtpid (move to PID register, essentially MMU context
switch) on another thread of the core, which can cause stores to
continue to go to a page after it's unmapped.
- A fix in our KVM code to add a missing barrier, the lack of which
has been observed to cause missed IPIs and subsequently stuck CPUs
in the host.
- A change to the way we initialise PCR (Processor Compatibility
Register) to make it forward compatible with future CPUs.
- On some older PowerVM systems our H_BLOCK_REMOVE support could
oops, fix it to detect such systems and fallback to the old
invalidation method.
- A fix for an oops seen on some machines when using KASAN on 32-bit.
- A handful of other minor fixes, and two new selftests.
Thanks to: Alistair Popple, Aneesh Kumar K.V, Christophe Leroy,
Gustavo Romero, Joel Stanley, Jordan Niethe, Laurent Dufour, Michael
Roth, Oliver O'Halloran"
* tag 'powerpc-5.4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/eeh: Fix eeh eeh_debugfs_break_device() with SRIOV devices
powerpc/nvdimm: use H_SCM_QUERY hcall on H_OVERLAP error
powerpc/nvdimm: Use HCALL error as the return value
selftests/powerpc: Add test case for tlbie vs mtpidr ordering issue
powerpc/mm: Fixup tlbie vs mtpidr/mtlpidr ordering issue on POWER9
powerpc/book3s64/radix: Rename CPU_FTR_P9_TLBIE_BUG feature flag
powerpc/book3s64/mm: Don't do tlbie fixup for some hardware revisions
powerpc/pseries: Call H_BLOCK_REMOVE when supported
powerpc/pseries: Read TLB Block Invalidate Characteristics
KVM: PPC: Book3S HV: use smp_mb() when setting/clearing host_ipi flag
powerpc/mm: Fix an Oops in kasan_mmu_init()
powerpc/mm: Add a helper to select PAGE_KERNEL_RO or PAGE_READONLY
powerpc/64s: Set reserved PCR bits
powerpc: Fix definition of PCR bits to work with old binutils
powerpc/book3s64/radix: Remove WARN_ON in destroy_context()
powerpc/tm: Add tm-poison test
Pull x86 fix from Ingo Molnar:
"A kexec fix for the case when GCC_PLUGIN_STACKLEAK=y is enabled"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/purgatory: Disable the stackleak GCC plugin for the purgatory
Pull scheduler fixes from Ingo Molnar:
- Apply a number of membarrier related fixes and cleanups, which fixes
a use-after-free race in the membarrier code
- Introduce proper RCU protection for tasks on the runqueue - to get
rid of the subtle task_rcu_dereference() interface that was easy to
get wrong
- Misc fixes, but also an EAS speedup
* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/fair: Avoid redundant EAS calculation
sched/core: Remove double update_max_interval() call on CPU startup
sched/core: Fix preempt_schedule() interrupt return comment
sched/fair: Fix -Wunused-but-set-variable warnings
sched/core: Fix migration to invalid CPU in __set_cpus_allowed_ptr()
sched/membarrier: Return -ENOMEM to userspace on memory allocation failure
sched/membarrier: Skip IPIs when mm->mm_users == 1
selftests, sched/membarrier: Add multi-threaded test
sched/membarrier: Fix p->mm->membarrier_state racy load
sched/membarrier: Call sync_core only before usermode for same mm
sched/membarrier: Remove redundant check
sched/membarrier: Fix private expedited registration check
tasks, sched/core: RCUify the assignment of rq->curr
tasks, sched/core: With a grace period after finish_task_switch(), remove unnecessary code
tasks, sched/core: Ensure tasks are available for a grace period after leaving the runqueue
tasks: Add a count of task RCU users
sched/core: Convert vcpu_is_preempted() from macro to an inline function
sched/fair: Remove unused cfs_rq_clock_task() function
Pull kernel lockdown mode from James Morris:
"This is the latest iteration of the kernel lockdown patchset, from
Matthew Garrett, David Howells and others.
From the original description:
This patchset introduces an optional kernel lockdown feature,
intended to strengthen the boundary between UID 0 and the kernel.
When enabled, various pieces of kernel functionality are restricted.
Applications that rely on low-level access to either hardware or the
kernel may cease working as a result - therefore this should not be
enabled without appropriate evaluation beforehand.
The majority of mainstream distributions have been carrying variants
of this patchset for many years now, so there's value in providing a
doesn't meet every distribution requirement, but gets us much closer
to not requiring external patches.
There are two major changes since this was last proposed for mainline:
- Separating lockdown from EFI secure boot. Background discussion is
covered here: https://lwn.net/Articles/751061/
- Implementation as an LSM, with a default stackable lockdown LSM
module. This allows the lockdown feature to be policy-driven,
rather than encoding an implicit policy within the mechanism.
The new locked_down LSM hook is provided to allow LSMs to make a
policy decision around whether kernel functionality that would allow
tampering with or examining the runtime state of the kernel should be
permitted.
The included lockdown LSM provides an implementation with a simple
policy intended for general purpose use. This policy provides a coarse
level of granularity, controllable via the kernel command line:
lockdown={integrity|confidentiality}
Enable the kernel lockdown feature. If set to integrity, kernel features
that allow userland to modify the running kernel are disabled. If set to
confidentiality, kernel features that allow userland to extract
confidential information from the kernel are also disabled.
This may also be controlled via /sys/kernel/security/lockdown and
overriden by kernel configuration.
New or existing LSMs may implement finer-grained controls of the
lockdown features. Refer to the lockdown_reason documentation in
include/linux/security.h for details.
The lockdown feature has had signficant design feedback and review
across many subsystems. This code has been in linux-next for some
weeks, with a few fixes applied along the way.
Stephen Rothwell noted that commit 9d1f8be5cf ("bpf: Restrict bpf
when kernel lockdown is in confidentiality mode") is missing a
Signed-off-by from its author. Matthew responded that he is providing
this under category (c) of the DCO"
* 'next-lockdown' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: (31 commits)
kexec: Fix file verification on S390
security: constify some arrays in lockdown LSM
lockdown: Print current->comm in restriction messages
efi: Restrict efivar_ssdt_load when the kernel is locked down
tracefs: Restrict tracefs when the kernel is locked down
debugfs: Restrict debugfs when the kernel is locked down
kexec: Allow kexec_file() with appropriate IMA policy when locked down
lockdown: Lock down perf when in confidentiality mode
bpf: Restrict bpf when kernel lockdown is in confidentiality mode
lockdown: Lock down tracing and perf kprobes when in confidentiality mode
lockdown: Lock down /proc/kcore
x86/mmiotrace: Lock down the testmmiotrace module
lockdown: Lock down module params that specify hardware parameters (eg. ioport)
lockdown: Lock down TIOCSSERIAL
lockdown: Prohibit PCMCIA CIS storage when the kernel is locked down
acpi: Disable ACPI table override if the kernel is locked down
acpi: Ignore acpi_rsdp kernel param when the kernel has been locked down
ACPI: Limit access to custom_method when the kernel is locked down
x86/msr: Restrict MSR access when the kernel is locked down
x86: Lock down IO port access when the kernel is locked down
...
Pull integrity updates from Mimi Zohar:
"The major feature in this time is IMA support for measuring and
appraising appended file signatures. In addition are a couple of bug
fixes and code cleanup to use struct_size().
In addition to the PE/COFF and IMA xattr signatures, the kexec kernel
image may be signed with an appended signature, using the same
scripts/sign-file tool that is used to sign kernel modules.
Similarly, the initramfs may contain an appended signature.
This contained a lot of refactoring of the existing appended signature
verification code, so that IMA could retain the existing framework of
calculating the file hash once, storing it in the IMA measurement list
and extending the TPM, verifying the file's integrity based on a file
hash or signature (eg. xattrs), and adding an audit record containing
the file hash, all based on policy. (The IMA support for appended
signatures patch set was posted and reviewed 11 times.)
The support for appended signature paves the way for adding other
signature verification methods, such as fs-verity, based on a single
system-wide policy. The file hash used for verifying the signature and
the signature, itself, can be included in the IMA measurement list"
* 'next-integrity' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity:
ima: ima_api: Use struct_size() in kzalloc()
ima: use struct_size() in kzalloc()
sefltest/ima: support appended signatures (modsig)
ima: Fix use after free in ima_read_modsig()
MODSIGN: make new include file self contained
ima: fix freeing ongoing ahash_request
ima: always return negative code for error
ima: Store the measurement again when appraising a modsig
ima: Define ima-modsig template
ima: Collect modsig
ima: Implement support for module-style appended signatures
ima: Factor xattr_verify() out of ima_appraise_measurement()
ima: Add modsig appraise_type option for module-style appended signatures
integrity: Select CONFIG_KEYS instead of depending on it
PKCS#7: Introduce pkcs7_get_digest()
PKCS#7: Refactor verify_pkcs7_signature()
MODSIGN: Export module signature definitions
ima: initialize the "template" field with the default template
- add a new knfsd file cache, so that we don't have to open and
close on each (NFSv2/v3) READ or WRITE. This can speed up
read and write in some cases. It also replaces our readahead
cache.
- Prevent silent data loss on write errors, by treating write
errors like server reboots for the purposes of write caching,
thus forcing clients to resend their writes.
- Tweak the code that allocates sessions to be more forgiving,
so that NFSv4.1 mounts are less likely to hang when a server
already has a lot of clients.
- Eliminate an arbitrary limit on NFSv4 ACL sizes; they should
now be limited only by the backend filesystem and the
maximum RPC size.
- Allow the server to enforce use of the correct kerberos
credentials when a client reclaims state after a reboot.
And some miscellaneous smaller bugfixes and cleanup.
-----BEGIN PGP SIGNATURE-----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=diBo
-----END PGP SIGNATURE-----
Merge tag 'nfsd-5.4' of git://linux-nfs.org/~bfields/linux
Pull nfsd updates from Bruce Fields:
"Highlights:
- Add a new knfsd file cache, so that we don't have to open and close
on each (NFSv2/v3) READ or WRITE. This can speed up read and write
in some cases. It also replaces our readahead cache.
- Prevent silent data loss on write errors, by treating write errors
like server reboots for the purposes of write caching, thus forcing
clients to resend their writes.
- Tweak the code that allocates sessions to be more forgiving, so
that NFSv4.1 mounts are less likely to hang when a server already
has a lot of clients.
- Eliminate an arbitrary limit on NFSv4 ACL sizes; they should now be
limited only by the backend filesystem and the maximum RPC size.
- Allow the server to enforce use of the correct kerberos credentials
when a client reclaims state after a reboot.
And some miscellaneous smaller bugfixes and cleanup"
* tag 'nfsd-5.4' of git://linux-nfs.org/~bfields/linux: (34 commits)
sunrpc: clean up indentation issue
nfsd: fix nfs read eof detection
nfsd: Make nfsd_reset_boot_verifier_locked static
nfsd: degraded slot-count more gracefully as allocation nears exhaustion.
nfsd: handle drc over-allocation gracefully.
nfsd: add support for upcall version 2
nfsd: add a "GetVersion" upcall for nfsdcld
nfsd: Reset the boot verifier on all write I/O errors
nfsd: Don't garbage collect files that might contain write errors
nfsd: Support the server resetting the boot verifier
nfsd: nfsd_file cache entries should be per net namespace
nfsd: eliminate an unnecessary acl size limit
Deprecate nfsd fault injection
nfsd: remove duplicated include from filecache.c
nfsd: Fix the documentation for svcxdr_tmpalloc()
nfsd: Fix up some unused variable warnings
nfsd: close cached files prior to a REMOVE or RENAME that would replace target
nfsd: rip out the raparms cache
nfsd: have nfsd_test_lock use the nfsd_file cache
nfsd: hook up nfs4_preprocess_stateid_op to the nfsd_file cache
...
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSQHSd0lITzzeNWNm3h3BK/laaZPAUCXYx2zAAKCRDh3BK/laaZ
PFpHAQD2G+F8a9e41jFTJg5YpNKMD8/Pl4T6v9chIO9qPXF2IAEAji0P1JterRfv
ixiBhv54hSwYbk527nxNWE9tP5gAHAQ=
=WCHy
-----END PGP SIGNATURE-----
Merge tag 'virtio-fs-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse
Pull fuse virtio-fs support from Miklos Szeredi:
"Virtio-fs allows exporting directory trees on the host and mounting
them in guest(s).
This isn't actually a new filesystem, but a glue layer between the
fuse filesystem and a virtio based back-end.
It's similar in functionality to the existing virtio-9p solution, but
significantly faster in benchmarks and has better POSIX compliance.
Further permformance improvements can be achieved by sharing the page
cache between host and guest, allowing for faster I/O and reduced
memory use.
Kata Containers have been including the out-of-tree virtio-fs (with
the shared page cache patches as well) since version 1.7 as an
experimental feature. They have been active in development and plan to
switch from virtio-9p to virtio-fs as their default solution. There
has been interest from other sources as well.
The userspace infrastructure is slated to be merged into qemu once the
kernel part hits mainline.
This was developed by Vivek Goyal, Dave Gilbert and Stefan Hajnoczi"
* tag 'virtio-fs-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
virtio-fs: add virtiofs filesystem
virtio-fs: add Documentation/filesystems/virtiofs.rst
fuse: reserve values for mapping protocol
Small fixes all around:
- avoid overlayfs copy-up for PRIVATE mmaps
- KUMSAN uninitialized warning for transport error
- one syzbot memory leak fix in 9p cache
- internal API cleanup for v9fs_fill_super
-----BEGIN PGP SIGNATURE-----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=VBrx
-----END PGP SIGNATURE-----
Merge tag '9p-for-5.4' of git://github.com/martinetd/linux
Pull 9p updates from Dominique Martinet:
"Some of the usual small fixes and cleanup.
Small fixes all around:
- avoid overlayfs copy-up for PRIVATE mmaps
- KUMSAN uninitialized warning for transport error
- one syzbot memory leak fix in 9p cache
- internal API cleanup for v9fs_fill_super"
* tag '9p-for-5.4' of git://github.com/martinetd/linux:
9p/vfs_super.c: Remove unused parameter data in v9fs_fill_super
9p/cache.c: Fix memory leak in v9fs_cache_session_get_cookie
9p: Transport error uninitialized
9p: avoid attaching writeback_fid on mmap with type PRIVATE
Some additional RISC-V updates for v5.4-rc1. This includes one
significant fix:
- Prevent interrupts from being unconditionally re-enabled during
exception handling if they were disabled in the context in which the
exception occurred
Also a few other fixes:
- Fix a build error when sparse memory support is manually enabled
- Prevent CPUs beyond CONFIG_NR_CPUS from being enabled in early boot
And a few minor improvements:
- DT improvements: in the FU540 SoC DT files, improve U-Boot
compatibility by adding an "ethernet0" alias, drop an unnecessary
property from the DT files, and add support for the PWM device
- KVM preparation: add a KVM-related macro for future RISC-V KVM
support, and export some symbols required to build KVM support as
modules
- defconfig additions: build more drivers by default for QEMU
configurations
-----BEGIN PGP SIGNATURE-----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=wfz5
-----END PGP SIGNATURE-----
Merge tag 'riscv/for-v5.4-rc1-b' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull more RISC-V updates from Paul Walmsley:
"Some additional RISC-V updates.
This includes one significant fix:
- Prevent interrupts from being unconditionally re-enabled during
exception handling if they were disabled in the context in which
the exception occurred
Also a few other fixes:
- Fix a build error when sparse memory support is manually enabled
- Prevent CPUs beyond CONFIG_NR_CPUS from being enabled in early boot
And a few minor improvements:
- DT improvements: in the FU540 SoC DT files, improve U-Boot
compatibility by adding an "ethernet0" alias, drop an unnecessary
property from the DT files, and add support for the PWM device
- KVM preparation: add a KVM-related macro for future RISC-V KVM
support, and export some symbols required to build KVM support as
modules
- defconfig additions: build more drivers by default for QEMU
configurations"
* tag 'riscv/for-v5.4-rc1-b' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: Avoid interrupts being erroneously enabled in handle_exception()
riscv: dts: sifive: Drop "clock-frequency" property of cpu nodes
riscv: dts: sifive: Add ethernet0 to the aliases node
RISC-V: Export kernel symbols for kvm
KVM: RISC-V: Add KVM_REG_RISCV for ONE_REG interface
arch/riscv: disable excess harts before picking main boot hart
RISC-V: Enable VIRTIO drivers in RV64 and RV32 defconfig
RISC-V: Fix building error when CONFIG_SPARSEMEM_MANUAL=y
riscv: dts: Add DT support for SiFive FU540 PWM driver
nios2: force the string buffer NULL-terminated
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=AWE5
-----END PGP SIGNATURE-----
Merge tag 'nios2-v5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/lftan/nios2
Pull nios2 fix from Ley Foon Tan:
"Make sure the command line buffer is NUL-terminated"
* tag 'nios2-v5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/lftan/nios2:
nios2: force the string buffer NULL-terminated
In ca8210_probe the allocated pdata needs to be assigned to
spi_device->dev.platform_data before calling ca8210_get_platform_data.
Othrwise when ca8210_get_platform_data fails pdata cannot be released.
Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com>
Link: https://lore.kernel.org/r/20190917224713.26371-1-navid.emamdoost@gmail.com
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
* The usual accuracy improvements for nested virtualization
* The usual round of code cleanups from Sean
* Added back optimizations that were prematurely removed in 5.2
(the bare minimum needed to fix the regression was in 5.3-rc8,
here comes the rest)
* Support for UMWAIT/UMONITOR/TPAUSE
* Direct L2->L0 TLB flushing when L0 is Hyper-V and L1 is KVM
* Tell Windows guests if SMT is disabled on the host
* More accurate detection of vmexit cost
* Revert a pvqspinlock pessimization
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQEcBAABAgAGBQJdjfaKAAoJEL/70l94x66D8MAH/2thJnM47tYtMTFA4GBFugeH
mAx8OApWFBo8apOip+8ElFLPQ8FQdZCzr9ti8H4JkuzKxgsxCs1iqEg5pHEKxSTi
K9kLOZwoFtwgy3XmxC0PIZ9lT2Wx74ruh1HF+QG/YsjKH636UPv2VpmulsTNbm62
2ryzOb3TlGT/cjf+gv9l6IYIxZa2Ff19PF4i//H8u4YRBj358/jr99CK01iE0M9r
4NhEKiQZywzREWtKxymGOM6HEbwbWcIa+loYjj2htq8epep6f9Y1zQ0Jcn5+nPA0
cn1T2gGJAJ0OUahKLwNbz8pzrFDkW+eoQgqCBJZ4RT9Uf8WCESfl14p+/vRkAMg=
=tk5S
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull more KVM updates from Paolo Bonzini:
"x86 KVM changes:
- The usual accuracy improvements for nested virtualization
- The usual round of code cleanups from Sean
- Added back optimizations that were prematurely removed in 5.2 (the
bare minimum needed to fix the regression was in 5.3-rc8, here
comes the rest)
- Support for UMWAIT/UMONITOR/TPAUSE
- Direct L2->L0 TLB flushing when L0 is Hyper-V and L1 is KVM
- Tell Windows guests if SMT is disabled on the host
- More accurate detection of vmexit cost
- Revert a pvqspinlock pessimization"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (56 commits)
KVM: nVMX: cleanup and fix host 64-bit mode checks
KVM: vmx: fix build warnings in hv_enable_direct_tlbflush() on i386
KVM: x86: Don't check kvm_rebooting in __kvm_handle_fault_on_reboot()
KVM: x86: Drop ____kvm_handle_fault_on_reboot()
KVM: VMX: Add error handling to VMREAD helper
KVM: VMX: Optimize VMX instruction error and fault handling
KVM: x86: Check kvm_rebooting in kvm_spurious_fault()
KVM: selftests: fix ucall on x86
Revert "locking/pvqspinlock: Don't wait if vCPU is preempted"
kvm: nvmx: limit atomic switch MSRs
kvm: svm: Intercept RDPRU
kvm: x86: Add "significant index" flag to a few CPUID leaves
KVM: x86/mmu: Skip invalid pages during zapping iff root_count is zero
KVM: x86/mmu: Explicitly track only a single invalid mmu generation
KVM: x86/mmu: Revert "KVM: x86/mmu: Remove is_obsolete() call"
KVM: x86/mmu: Revert "Revert "KVM: MMU: reclaim the zapped-obsolete page first""
KVM: x86/mmu: Revert "Revert "KVM: MMU: collapse TLB flushes when zap all pages""
KVM: x86/mmu: Revert "Revert "KVM: MMU: zap pages in batch""
KVM: x86/mmu: Revert "Revert "KVM: MMU: add tracepoint for kvm_mmu_invalidate_all_pages""
KVM: x86/mmu: Revert "Revert "KVM: MMU: show mmu_valid_gen in shadow page related tracepoints""
...
Besides one new driver being added for the PWM controller found in
various Spreadtrum SoCs, this series of changes brings a slew of, mostly
minor, fixes and cleanups for existing drivers, as well as some
enhancements to the core code.
Lastly, Uwe is added to the PWM subsystem entry of the MAINTAINERS file,
making official his role as a reviewer.
-----BEGIN PGP SIGNATURE-----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=C9sW
-----END PGP SIGNATURE-----
Merge tag 'pwm/for-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm
Pull pwm updates from Thierry Reding:
"Besides one new driver being added for the PWM controller found in
various Spreadtrum SoCs, this series of changes brings a slew of,
mostly minor, fixes and cleanups for existing drivers, as well as some
enhancements to the core code.
Lastly, Uwe is added to the PWM subsystem entry of the MAINTAINERS
file, making official his role as a reviewer"
* tag 'pwm/for-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: (34 commits)
MAINTAINERS: Add myself as reviewer for the PWM subsystem
MAINTAINERS: Add patchwork link for PWM entry
MAINTAINERS: Add a selection of PWM related keywords to the PWM entry
pwm: mediatek: Add MT7629 compatible string
dt-bindings: pwm: Update bindings for MT7629 SoC
pwm: mediatek: Update license and switch to SPDX tag
pwm: mediatek: Use pwm_mediatek as common prefix
pwm: mediatek: Allocate the clks array dynamically
pwm: mediatek: Remove the has_clks field
pwm: mediatek: Drop the check for of_device_get_match_data()
pwm: atmel: Consolidate driver data initialization
pwm: atmel: Remove unneeded check for match data
pwm: atmel: Remove platform_device_id and use only dt bindings
pwm: stm32-lp: Add check in case requested period cannot be achieved
pwm: Ensure pwm_apply_state() doesn't modify the state argument
pwm: fsl-ftm: Don't update the state for the caller of pwm_apply_state()
pwm: sun4i: Don't update the state for the caller of pwm_apply_state()
pwm: rockchip: Don't update the state for the caller of pwm_apply_state()
pwm: Let pwm_get_state() return the last implemented state
pwm: Introduce local struct pwm_chip in pwm_apply_state()
...
-----BEGIN PGP SIGNATURE-----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=DEYH
-----END PGP SIGNATURE-----
Merge tag 'for-5.4/io_uring-2019-09-27' of git://git.kernel.dk/linux-block
Pull more io_uring updates from Jens Axboe:
"Just two things in here:
- Improvement to the io_uring CQ ring wakeup for batched IO (me)
- Fix wrong comparison in poll handling (yangerkun)
I realize the first one is a little late in the game, but it felt
pointless to hold it off until the next release. Went through various
testing and reviews with Pavel and peterz"
* tag 'for-5.4/io_uring-2019-09-27' of git://git.kernel.dk/linux-block:
io_uring: make CQ ring wakeups be more efficient
io_uring: compare cached_cq_tail with cq.head in_io_uring_poll
There is a statement that is indented too deeply, remove
the extraneous tab.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
-----BEGIN PGP SIGNATURE-----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=ZYIh
-----END PGP SIGNATURE-----
Merge tag 'for-linus-2019-09-27' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
"A few fixes/changes to round off this merge window. This contains:
- Small series making some functional tweaks to blk-iocost (Tejun)
- Elevator switch locking fix (Ming)
- Kill redundant call in blk-wbt (Yufen)
- Fix flush timeout handling (Yufen)"
* tag 'for-linus-2019-09-27' of git://git.kernel.dk/linux-block:
block: fix null pointer dereference in blk_mq_rq_timed_out()
rq-qos: get rid of redundant wbt_update_limits()
iocost: bump up default latency targets for hard disks
iocost: improve nr_lagging handling
iocost: better trace vrate changes
block: don't release queue's sysfs lock during switching elevator
blk-mq: move lockdep_assert_held() into elevator_exit
In nfp_abm_u32_knode_replace if the allocation for match fails it should
go to the error handling instead of returning. Updated other gotos to
have correct errno returned, too.
Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Yuchung Cheng and Marek Majkowski independently reported a weird
behavior of TCP_USER_TIMEOUT option when used at connect() time.
When the TCP_USER_TIMEOUT is reached, tcp_write_timeout()
believes the flow should live, and the following condition
in tcp_clamp_rto_to_user_timeout() programs one jiffie timers :
remaining = icsk->icsk_user_timeout - elapsed;
if (remaining <= 0)
return 1; /* user timeout has passed; fire ASAP */
This silly situation ends when the max syn rtx count is reached.
This patch makes sure we honor both TCP_SYNCNT and TCP_USER_TIMEOUT,
avoiding these spurious SYN packets.
Fixes: b701a99e43 ("tcp: Add tcp_clamp_rto_to_user_timeout() helper to improve accuracy")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Yuchung Cheng <ycheng@google.com>
Reported-by: Marek Majkowski <marek@cloudflare.com>
Cc: Jon Maxwell <jmaxwell37@gmail.com>
Link: https://marc.info/?l=linux-netdev&m=156940118307949&w=2
Acked-by: Jon Maxwell <jmaxwell37@gmail.com>
Tested-by: Marek Majkowski <marek@cloudflare.com>
Signed-off-by: Marek Majkowski <marek@cloudflare.com>
Acked-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Now that we have a 3rd extension, add a new helper that drops the
extension space and use it when we need to scrub an sk_buff.
At this time, scrubbing clears secpath and bridge netfilter data, but
retains the tc skb extension, after this patch all three get cleared.
NAPI reuse/free assumes we can only have a secpath attached to skb, but
it seems better to clear all extensions there as well.
v2: add unlikely hint (Eric Dumazet)
Fixes: 95a7233c45 ("net: openvswitch: Set OvS recirc_id from tc chain index")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
There was a bug in the previous logic that attempted to ensure gain cycling
gets inflight above BDP even for small BDPs. This code correctly raised and
lowered target inflight values during the gain cycle. And this code
correctly ensured that cwnd was raised when probing bandwidth. However, it
did not correspondingly ensure that cwnd was *not* raised in this way when
*not* probing for bandwidth. The result was that small-BDP flows that were
always cwnd-bound could go for many cycles with a fixed cwnd, and not probe
or yield bandwidth at all. This meant that multiple small-BDP flows could
fail to converge in their bandwidth allocations.
Fixes: 3c346b233c68 ("tcp_bbr: fix bw probing to raise in-flight data for very small BDPs")
Signed-off-by: Kevin(Yudong) Yang <yyd@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Acked-by: Yuchung Cheng <ycheng@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Acked-by: Priyaranjan Jha <priyarjha@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull thermal management updates from Zhang Rui:
- Add Amit Kucheria as thermal subsystem Reviewer (Amit Kucheria)
- Fix a use after free bug when unregistering thermal zone devices (Ido
Schimmel)
- Fix thermal core framework to use put_device() when device_register()
fails (Yue Hu)
- Enable intel_pch_thermal and MMIO RAPL support for Intel Icelake
platform (Srinivas Pandruvada)
- Add clock operations in qorip thermal driver, for some platforms with
clock control like i.MX8MQ (Anson Huang)
- A couple of trivial fixes and cleanups for thermal core and different
soc thermal drivers (Amit Kucheria, Christophe JAILLET, Chuhong Yuan,
Fuqian Huang, Kelsey Skunberg, Nathan Huckleberry, Rishi Gupta,
Srinivas Kandagatla)
* 'for-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux:
MAINTAINERS: Add Amit Kucheria as reviewer for thermal
thermal: Add some error messages
thermal: Fix use-after-free when unregistering thermal zone device
thermal/drivers/core: Use put_device() if device_register() fails
thermal_hwmon: Sanitize thermal_zone type
thermal: intel: Use dev_get_drvdata
thermal: intel: int3403: replace printk(KERN_WARN...) with pr_warn(...)
thermal: intel: int340x_thermal: Remove unnecessary acpi_has_method() uses
thermal: int340x: processor_thermal: Add Ice Lake support
drivers: thermal: qcom: tsens: Fix memory leak from qfprom read
thermal: tegra: Fix a typo
thermal: rcar_gen3_thermal: Replace devm_add_action() followed by failure action with devm_add_action_or_reset()
thermal: armada: Fix -Wshift-negative-value
dt-bindings: thermal: qoriq: Add optional clocks property
thermal: qoriq: Use __maybe_unused instead of #if CONFIG_PM_SLEEP
thermal: qoriq: Use devm_platform_ioremap_resource() instead of of_iomap()
thermal: qoriq: Fix error path of calling qoriq_tmu_register_tmu_zone fail
thermal: qoriq: Add clock operations
drivers: thermal: processor_thermal_device: Export sysfs interface for TCC offset
Ido Schimmel says:
====================
mlxsw: Various fixes
This patchset includes two small fixes for the mlxsw driver and one
patch which clarifies recently introduced devlink-trap documentation.
Patch #1 clears the port's VLAN filters during port initialization. This
ensures that the drop reason reported to the user is consistent. The
problem is explained in detail in the commit message.
Patch #2 clarifies the description of one of the traps exposed via
devlink-trap.
Patch #3 from Danielle forbids the installation of a tc filter with
multiple mirror actions since this is not supported by the device. The
failure is communicated to the user via extack.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The ASIC can only mirror a packet to one port, but when user is trying
to set more than one mirror action, it doesn't fail.
Add a check if more than one mirror action was specified per rule and if so,
fail for not being supported.
Fixes: d0d13c1858 ("mlxsw: spectrum_acl: Add support for mirror action")
Signed-off-by: Danielle Ratson <danieller@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Alex noted that the below description might not be obvious to all users.
Clarify it by adding an example.
Fixes: f3047ca01f ("Documentation: Add devlink-trap documentation")
Reported-by: Alex Kushnarov <alexanderk@mellanox.com>
Reviewed-by: Alex Kushnarov <alexanderk@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When a port is created, its VLAN filters are not cleared by the
firmware. This causes tagged packets to be later dropped by the ingress
STP filters, which default to DISCARD state.
The above did not matter much until commit b5ce611fd9 ("mlxsw:
spectrum: Add devlink-trap support") where we exposed the drop reason to
users.
Without this patch, the drop reason users will see is not consistent. If
a port is enslaved to a VLAN-aware bridge and a packet with an invalid
VLAN tries to ingress the bridge, it will be dropped due to ingress STP
filter. If the VLAN is later enabled and then disabled, the packet will
be dropped by the ingress VLAN filter despite the above being a
seemingly NOP operation.
Fix this by clearing all the VLAN filters during port initialization.
Adjust the test accordingly.
Fixes: b5ce611fd9 ("mlxsw: spectrum: Add devlink-trap support")
Reported-by: Alex Kushnarov <alexanderk@mellanox.com>
Tested-by: Alex Kushnarov <alexanderk@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There memset is indented incorrectly, remove the extraneous tabs.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The return statement is indented incorrectly, add in a missing
tab and remove an extraneous space after the return
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The Micrel KSZ9031 PHY may fail to establish a link when the Asymmetric
Pause capability is set. This issue is described in a Silicon Errata
(DS80000691D or DS80000692D), which advises to always disable the
capability.
Micrel KSZ9021 has no errata, but has the same issue with Asymmetric Pause.
This patch apply the same workaround as the one for KSZ9031.
Fixes: 3aed3e2a14 ("net: phy: micrel: add Asym Pause workaround")
Signed-off-by: Hans Andersson <hans.andersson@cellavision.se>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Until calling register_netdev(), ndev->dev_name isn't specified, and
netdev_err() displays "(unnamed net_device)".
ave 65000000.ethernet (unnamed net_device) (uninitialized): invalid phy-mode setting
ave: probe of 65000000.ethernet failed with error -22
This replaces netdev_err() with dev_err() before calling register_netdev().
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit 415606588c ("PTP: introduce new versions of IOCTLs",
2019-09-13) introduced new versions of the PTP ioctls which actually
validate that the flags are acceptable values.
As part of this, it cleared the flags value using a bitwise
and+negation, in an attempt to prevent the old ioctl from accidentally
enabling new features.
This is incorrect for a couple of reasons. First, it results in
accidentally preventing previously working flags on the request ioctl.
By clearing the "valid" flags, we now no longer allow setting the
enable, rising edge, or falling edge flags.
Second, if we add new additional flags in the future, they must not be
set by the old ioctl. (Since the flag wasn't checked before, we could
potentially break userspace programs which sent garbage flag data.
The correct way to resolve this is to check for and clear all but the
originally valid flags.
Create defines indicating which flags are correctly checked and
interpreted by the original ioctls. Use these to clear any bits which
will not be correctly interpreted by the original ioctls.
In the future, new flags must be added to the VALID_FLAGS macros, but
*not* to the V1_VALID_FLAGS macros. In this way, new features may be
exposed over the v2 ioctls, but without breaking previous userspace
which happened to not clear the flags value properly. The old ioctl will
continue to behave the same way, while the new ioctl gains the benefit
of using the flags fields.
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Felipe Balbi <felipe.balbi@linux.intel.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Christopher Hall <christopher.s.hall@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix help text typos for DIMLIB.
Fixes: 4f75da3666 ("linux/dim: Move implementation to .c files")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Uwe Kleine-König <uwe@kleine-koenig.org>
Cc: Tal Gilboa <talgi@mellanox.com>
Cc: Saeed Mahameed <saeedm@mellanox.com>
Acked-by: Uwe Kleine-König <uwe@kleine-koenig.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The regmap stride is set to 1 for regmap describing 8bit registers already.
However, for 16/32/64bit registers, the stride is 2/4/8 respectively. This
is not correct, as the switch protocol supports unaligned register reads
and writes and the KSZ87xx even uses such unaligned register accesses to
read e.g. MIB counter.
This patch fixes MIB counter access on KSZ87xx.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: David S. Miller <davem@davemloft.net>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: George McCollister <george.mccollister@gmail.com>
Cc: Tristram Ha <Tristram.Ha@microchip.com>
Cc: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Cc: Woojung Huh <woojung.huh@microchip.com>
Fixes: 46558d601c ("net: dsa: microchip: Initial SPI regmap support")
Fixes: 255b59ad0d ("net: dsa: microchip: Factor out regmap config generation into common header")
Reviewed-by: George McCollister <george.mccollister@gmail.com>
Tested-by: George McCollister <george.mccollister@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.14 (GNU/Linux)
iEYEABECAAYFAl2NtDQACgkQ+iyteGJfRsoHgQCdGLeQMm4IR3jsDdFQk/eTIGfR
eNIAoN8AY1UTFvWJTxEOhucdAzEAVnHs
=TdeQ
-----END PGP SIGNATURE-----
Merge tag 'linux-watchdog-5.4-rc1' of git://www.linux-watchdog.org/linux-watchdog
Pull watchdog updates from Wim Van Sebroeck:
- addition of AST2600, i.MX7ULP and F81803 watchdog support
- removal of the w90x900 and ks8695 drivers
- ziirave_wdt improvements
- small fixes and improvements
* tag 'linux-watchdog-5.4-rc1' of git://www.linux-watchdog.org/linux-watchdog: (51 commits)
watchdog: f71808e_wdt: Add F81803 support
watchdog: qcom: remove unnecessary variable from private storage
watchdog: qcom: support pre-timeout when the bark irq is available
watchdog: imx_sc: this patch just fixes whitespaces
watchdog: apseed: Add access_cs0 option for alt-boot
watchdog: aspeed: add support for dual boot
watchdog: orion_wdt: use timer1 as a pretimeout
watchdog: Add i.MX7ULP watchdog support
dt-bindings: watchdog: Add i.MX7ULP bindings
dt-bindings: watchdog: sun4i: Add the watchdog clock
dt-bindings: watchdog: sun4i: Add the watchdog interrupts
dt-bindings: watchdog: Convert Allwinner watchdog to a schema
dt-bindings: watchdog: Add YAML schemas for the generic watchdog bindings
watchdog: aspeed: Add support for AST2600
dt-bindings: watchdog: Add ast2600 compatible
watchdog: ziirave_wdt: Update checked I2C functionality mask
watchdog: ziirave_wdt: Drop ziirave_firm_write_block_data()
watchdog: ziirave_wdt: Fix DOWNLOAD_START payload
watchdog: ziirave_wdt: Drop status polling code
watchdog: ziirave_wdt: Fix RESET_PROCESSOR payload
...
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains Netfilter fixes for net:
1) Add NFT_CHAIN_POLICY_UNSET to replace hardcoded -1 to
specify that the chain policy is unset. The chain policy
field is actually defined as an 8-bit unsigned integer.
2) Remove always true condition reported by smatch in
chain policy check.
3) Fix element lookup on dynamic sets, from Florian Westphal.
4) Use __u8 in ebtables uapi header, from Masahiro Yamada.
5) Bogus EBUSY when removing flowtable after chain flush,
from Laura Garcia Liebana.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
core:
- Some cleanups and fixes in the self-refresh helpers
- Some cleanups and fixes in the atomic helpers
amdgpu:
- Fix a 64 bit divide
- Prevent a memory leak in a failure case in dc
- Load proper gfx firmware on navi14 variants
- Add more navi12 and navi14 PCI ids
- Misc fixes for renoir
- Fix bandwidth issues with multiple displays on vega20
- Support for Dali
- Fix a possible oops with KFD on hawaii
- Fix for backlight level after resume on some APUs
- Other misc fixes
panfrost:
- Multiple panfrost fixes for regulator support and page fault handling
-----BEGIN PGP SIGNATURE-----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=yCyF
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2019-09-27' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"Fixes built up over the past 1.5 weeks or so, it's two weeks of
amdgpu, some core cleanups and some panfrost fixes. I also finally
figured out why my desktop was slow to do a bunch of stuff (someone
gave it an IPv6 address which can't reach anything!).
core:
- Some cleanups and fixes in the self-refresh helpers
- Some cleanups and fixes in the atomic helpers
amdgpu:
- Fix a 64 bit divide
- Prevent a memory leak in a failure case in dc
- Load proper gfx firmware on navi14 variants
- Add more navi12 and navi14 PCI ids
- Misc fixes for renoir
- Fix bandwidth issues with multiple displays on vega20
- Support for Dali
- Fix a possible oops with KFD on hawaii
- Fix for backlight level after resume on some APUs
- Other misc fixes
panfrost:
- Multiple panfrost fixes for regulator support and page fault
handling"
* tag 'drm-next-2019-09-27' of git://anongit.freedesktop.org/drm/drm: (34 commits)
drm/amd/display: prevent memory leak
drm/amdgpu/gfx10: add support for wks firmware loading
drm/amdgpu/display: include slab.h in dcn21_resource.c
drm/amdgpu/display: fix 64 bit divide
drm/panfrost: Prevent race when handling page fault
drm/panfrost: Remove NULL checks for regulator
drm/panfrost: Fix regulator_get_optional() misuse
drm: Measure Self Refresh Entry/Exit times to avoid thrashing
drm: Fix kerneldoc and remove unused struct member in self_refresh helper
drm/atomic: Rename crtc_state->pageflip_flags to async_flip
drm/atomic: Reject FLIP_ASYNC unconditionally
drm/atomic: Take the atomic toys away from X
drm/amdgpu: flag navi12 and 14 as experimental for 5.4
drm/kms: Duct-tape for mode object lifetime checks
drm/amdgpu: add navi12 pci id
drm/amdgpu: add navi14 PCI ID for work station SKU
drm/amdkfd: Swap trap temporary registers in gfx10 trap handler
drm/amd/powerplay: implement sysfs for getting dpm clock
drm/amd/display: Restore backlight brightness after system resume
drm/amd/display: Implement voltage limitation for dali
...
In nfp_flower_spawn_vnic_reprs in the loop if initialization or the
allocations fail memory is leaked. Appropriate releases are added.
Fixes: b945245297 ("nfp: flower: add per repr private data for LAG offload")
Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In nfp_flower_spawn_phy_reprs, in the for loop over eth_tbl if any of
intermediate allocations or initializations fail memory is leaked.
requiered releases are added.
Fixes: b945245297 ("nfp: flower: add per repr private data for LAG offload")
Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This a new feature, it is preferred that it defaults to N.
We will probe the feature support from userspace before actually using it.
Fixes: 95a7233c45 ('net: openvswitch: Set OvS recirc_id from tc chain index')
Signed-off-by: Paul Blakey <paulb@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
A user reported that vrf create fails when IPv6 is disabled at boot using
'ipv6.disable=1':
https://bugzilla.kernel.org/show_bug.cgi?id=204903
The failure is adding fib rules at create time. Add RTNL_FAMILY_IP6MR to
the check in vrf_fib_rule if ipv6_mod_enabled is disabled.
Fixes: e4a38c0c4b ("ipv6: add vrf table handling code for ipv6 mcast")
Signed-off-by: David Ahern <dsahern@gmail.com>
Cc: Patrick Ruddy <pruddy@vyatta.att-mail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
