- Make use of the IBM z16 processor activity instrumentation facility
to count cryptography operations: add a new PMU device driver so
that perf can make use of this.
- Add new IBM z16 extended counter set to cpumf support.
- Add vdso randomization support.
- Add missing KCSAN instrumentation to barriers and spinlocks, which
should make s390's KCSAN support complete.
- Add support for IPL-complete-control facility: notify the hypervisor
that kexec finished work and the kernel starts.
- Improve error logging for PCI.
- Various small changes to workaround llvm's integrated assembler
limitations, and one bug, to make it finally possible to compile the
kernel with llvm's integrated assembler. This also requires to raise
the minimum clang version to 14.0.0.
- Various other small enhancements, bug fixes, and cleanups all over
the place.
-----BEGIN PGP SIGNATURE-----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=W+1k
-----END PGP SIGNATURE-----
Merge tag 's390-5.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 updates from Heiko Carstens:
- Make use of the IBM z16 processor activity instrumentation facility
to count cryptography operations: add a new PMU device driver so that
perf can make use of this.
- Add new IBM z16 extended counter set to cpumf support.
- Add vdso randomization support.
- Add missing KCSAN instrumentation to barriers and spinlocks, which
should make s390's KCSAN support complete.
- Add support for IPL-complete-control facility: notify the hypervisor
that kexec finished work and the kernel starts.
- Improve error logging for PCI.
- Various small changes to workaround llvm's integrated assembler
limitations, and one bug, to make it finally possible to compile the
kernel with llvm's integrated assembler. This also requires to raise
the minimum clang version to 14.0.0.
- Various other small enhancements, bug fixes, and cleanups all over
the place.
* tag 's390-5.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (48 commits)
s390/head: get rid of 31 bit leftovers
scripts/min-tool-version.sh: raise minimum clang version to 14.0.0 for s390
s390/boot: do not emit debug info for assembly with llvm's IAS
s390/boot: workaround llvm IAS bug
s390/purgatory: workaround llvm's IAS limitations
s390/entry: workaround llvm's IAS limitations
s390/alternatives: remove padding generation code
s390/alternatives: provide identical sized orginal/alternative sequences
s390/cpumf: add new extended counter set for IBM z16
s390/preempt: disable __preempt_count_add() optimization for PROFILE_ALL_BRANCHES
s390/stp: clock_delta should be signed
s390/stp: fix todoff size
s390/pai: add support for cryptography counters
entry: Rename arch_check_user_regs() to arch_enter_from_user_mode()
s390/compat: cleanup compat_linux.h header file
s390/entry: remove broken and not needed code
s390/boot: convert parmarea to C
s390/boot: convert initial lowcore to C
s390/ptrace: move short psw definitions to ptrace header file
s390/head: initialize all new psws
...
are not really needed anymore
- Misc fixes and cleanups
-----BEGIN PGP SIGNATURE-----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=7AUX
-----END PGP SIGNATURE-----
Merge tag 'x86_cpu_for_v5.19_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 CPU feature updates from Borislav Petkov:
- Remove a bunch of chicken bit options to turn off CPU features which
are not really needed anymore
- Misc fixes and cleanups
* tag 'x86_cpu_for_v5.19_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/speculation: Add missing prototype for unpriv_ebpf_notify()
x86/pm: Fix false positive kmemleak report in msr_build_context()
x86/speculation/srbds: Do not try to turn mitigation off when not supported
x86/cpu: Remove "noclflush"
x86/cpu: Remove "noexec"
x86/cpu: Remove "nosmep"
x86/cpu: Remove CONFIG_X86_SMAP and "nosmap"
x86/cpu: Remove "nosep"
x86/cpu: Allow feature bit names from /proc/cpuinfo in clearcpuid=
Daniel Borkmann says:
====================
pull-request: bpf-next 2022-05-23
We've added 113 non-merge commits during the last 26 day(s) which contain
a total of 121 files changed, 7425 insertions(+), 1586 deletions(-).
The main changes are:
1) Speed up symbol resolution for kprobes multi-link attachments, from Jiri Olsa.
2) Add BPF dynamic pointer infrastructure e.g. to allow for dynamically sized ringbuf
reservations without extra memory copies, from Joanne Koong.
3) Big batch of libbpf improvements towards libbpf 1.0 release, from Andrii Nakryiko.
4) Add BPF link iterator to traverse links via seq_file ops, from Dmitrii Dolgov.
5) Add source IP address to BPF tunnel key infrastructure, from Kaixi Fan.
6) Refine unprivileged BPF to disable only object-creating commands, from Alan Maguire.
7) Fix JIT blinding of ld_imm64 when they point to subprogs, from Alexei Starovoitov.
8) Add BPF access to mptcp_sock structures and their meta data, from Geliang Tang.
9) Add new BPF helper for access to remote CPU's BPF map elements, from Feng Zhou.
10) Allow attaching 64-bit cookie to BPF link of fentry/fexit/fmod_ret, from Kui-Feng Lee.
11) Follow-ups to typed pointer support in BPF maps, from Kumar Kartikeya Dwivedi.
12) Add busy-poll test cases to the XSK selftest suite, from Magnus Karlsson.
13) Improvements in BPF selftest test_progs subtest output, from Mykola Lysenko.
14) Fill bpf_prog_pack allocator areas with illegal instructions, from Song Liu.
15) Add generic batch operations for BPF map-in-map cases, from Takshak Chahande.
16) Make bpf_jit_enable more user friendly when permanently on 1, from Tiezhu Yang.
17) Fix an array overflow in bpf_trampoline_get_progs(), from Yuntao Wang.
====================
Link: https://lore.kernel.org/r/20220523223805.27931-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch adds the bulk of the verifier work for supporting dynamic
pointers (dynptrs) in bpf.
A bpf_dynptr is opaque to the bpf program. It is a 16-byte structure
defined internally as:
struct bpf_dynptr_kern {
void *data;
u32 size;
u32 offset;
} __aligned(8);
The upper 8 bits of *size* is reserved (it contains extra metadata about
read-only status and dynptr type). Consequently, a dynptr only supports
memory less than 16 MB.
There are different types of dynptrs (eg malloc, ringbuf, ...). In this
patchset, the most basic one, dynptrs to a bpf program's local memory,
is added. For now only local memory that is of reg type PTR_TO_MAP_VALUE
is supported.
In the verifier, dynptr state information will be tracked in stack
slots. When the program passes in an uninitialized dynptr
(ARG_PTR_TO_DYNPTR | MEM_UNINIT), the stack slots corresponding
to the frame pointer where the dynptr resides at are marked
STACK_DYNPTR. For helper functions that take in initialized dynptrs (eg
bpf_dynptr_read + bpf_dynptr_write which are added later in this
patchset), the verifier enforces that the dynptr has been initialized
properly by checking that their corresponding stack slots have been
marked as STACK_DYNPTR.
The 6th patch in this patchset adds test cases that the verifier should
successfully reject, such as for example attempting to use a dynptr
after doing a direct write into it inside the bpf program.
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: David Vernet <void@manifault.com>
Link: https://lore.kernel.org/bpf/20220523210712.3641569-2-joannelkoong@gmail.com
Currently, CONFIG_MODVERSIONS needs extra link to embed the symbol
versions into ELF objects. Then, modpost extracts the version CRCs
from them.
The following figures show how it currently works, and how I am trying
to change it.
Current implementation
======================
|----------|
embed CRC -------------------------->| final |
$(CC) $(LD) / |---------| | link for |
-----> *.o -------> *.o -->| modpost | | vmlinux |
/ / | |-- *.mod.c -->| or |
/ genksyms / |---------| | module |
*.c ------> *.symversions |----------|
Genksyms outputs the calculated CRCs in the form of linker script
(*.symversions), which is used by $(LD) to update the object.
If CONFIG_LTO_CLANG=y, the build process is much more complex. Embedding
the CRCs is postponed until the LLVM bitcode is converted into ELF,
creating another intermediate *.prelink.o.
However, this complexity is unneeded. There is no reason why we must
embed version CRCs in objects so early.
There is final link stage for vmlinux (scripts/link-vmlinux.sh) and
modules (scripts/Makefile.modfinal). We can link CRCs at the very last
moment.
New implementation
==================
|----------|
--------------------------------------->| final |
$(CC) / |---------| | link for |
-----> *.o ---->| | | vmlinux |
/ | modpost |--- .vmlinux.export.c -->| or |
/ genksyms | |--- *.mod.c ------------>| module |
*.c ------> *.cmd -->|---------| |----------|
Pass the symbol versions to modpost as separate text data, which are
available in *.cmd files.
This commit changes modpost to extract CRCs from *.cmd files instead of
from ELF objects.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com> # LLVM-14 (x86-64)
find_symbol() returns the first symbol found in the hash table. This
table is global, so it may return a symbol from an unexpected module.
There is a case where we want to search for a symbol with a given name
in a specified module.
Add sym_find_with_module(), which receives the module pointer as the
second argument. It is equivalent to find_module() if NULL is passed
as the module pointer.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com> # LLVM-14 (x86-64)
Add and use a check-blacklist-hashes.awk script to make sure that the
builtin blacklist hashes set with CONFIG_SYSTEM_BLACKLIST_HASH_LIST will
effectively be taken into account as blacklisted hashes. This is useful
to debug invalid hash formats, and it make sure that previous hashes
which could have been loaded in the kernel, but silently ignored, are
now noticed and deal with by the user at kernel build time.
This also prevent stricter blacklist key description checking (provided
by following commits) to failed for builtin hashes.
Update CONFIG_SYSTEM_BLACKLIST_HASH_LIST help to explain the content of
a hash string and how to generate certificate ones.
Cc: David Howells <dhowells@redhat.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Eric Snowberg <eric.snowberg@oracle.com>
Cc: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Mickaël Salaün <mic@linux.microsoft.com>
Link: https://lore.kernel.org/r/20210712170313.884724-3-mic@digikod.net
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
This patch implements a new struct bpf_func_proto, named
bpf_skc_to_mptcp_sock_proto. Define a new bpf_id BTF_SOCK_TYPE_MPTCP,
and a new helper bpf_skc_to_mptcp_sock(), which invokes another new
helper bpf_mptcp_sock_from_subflow() in net/mptcp/bpf.c to get struct
mptcp_sock from a given subflow socket.
v2: Emit BTF type, add func_id checks in verifier.c and bpf_trace.c,
remove build check for CONFIG_BPF_JIT
v5: Drop EXPORT_SYMBOL (Martin)
Co-developed-by: Nicolas Rybowski <nicolas.rybowski@tessares.net>
Co-developed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Nicolas Rybowski <nicolas.rybowski@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220519233016.105670-2-mathew.j.martineau@linux.intel.com
These four files are left over from the h8300 removal.
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reported-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
When COMPILED_SOURCE is set, running
make ARCH=x86_64 COMPILED_SOURCE=1 cscope tags
could throw the following errors:
scripts/tags.sh: line 98: /usr/bin/realpath: Argument list too long
cscope: no source files found
scripts/tags.sh: line 98: /usr/bin/realpath: Argument list too long
ctags: No files specified. Try "ctags --help".
This is most likely to happen when the kernel is configured to build a
large number of modules, which has the consequence of passing too many
arguments when calling 'realpath' in 'all_compiled_sources()'.
Let's improve this by invoking 'realpath' through 'xargs', which takes
care of properly limiting the argument list.
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Link: https://lore.kernel.org/r/20220516234646.531208-1-cristian.ciocaltea@collabora.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Listings of maintainers and people who deserve credits are not really
interesting in terms of copyright. The usage of these files outside of the
kernel is pointless and the file format is trivial. No point in chasing
them or slapping a SPDX identifier into them just because.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Kernel configuration files like default configs are machine generated and
pretty useless outside of the kernel context.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The files and directories which are excluded from scanning are currently
hard coded in the script. That's not maintainable and not accessible for
external tools.
Move the files and directories which should be excluded into a file. The
default file is scripts/spdxexclude. This can be overridden with the
'-e $FILE' command line option.
The file format and syntax is similar to the .gitignore file.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Makes life easier when chasing the missing ones. Is activated with '-f'
on the command line.
# scripts/spdxcheck.py -f kernel/
Files without SPDX:
./kernel/cpu.c
./kernel/kmod.c
./kernel/relay.c
./kernel/bpf/offload.c
./kernel/bpf/preload/.gitignore
./kernel/bpf/preload/iterators/README
./kernel/bpf/ringbuf.c
./kernel/cgroup/cgroup.c
./kernel/cgroup/cpuset.c
./kernel/cgroup/legacy_freezer.c
./kernel/debug/debug_core.h
./kernel/debug/kdb/Makefile
./kernel/debug/kdb/kdb_bp.c
./kernel/debug/kdb/kdb_bt.c
./kernel/debug/kdb/kdb_cmds
./kernel/debug/kdb/kdb_debugger.c
./kernel/debug/kdb/kdb_io.c
./kernel/debug/kdb/kdb_keyboard.c
./kernel/debug/kdb/kdb_main.c
./kernel/debug/kdb/kdb_private.h
./kernel/debug/kdb/kdb_support.c
./kernel/locking/lockdep_states.h
./kernel/locking/mutex-debug.c
./kernel/locking/spinlock_debug.c
./kernel/sched/pelt.h
With the optional -D parameter the directory depth can be limited:
# scripts/spdxcheck.py -f -D 0 kernel/
Files without SPDX:
./kernel/cpu.c
./kernel/kmod.c
./kernel/relay.c
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add functionality to display [sub]directory statistics. This is enabled by
adding '-d' to the command line. The optional -D parameter allows to limit
the directory depth. If supplied the subdirectories are accumulated
# scripts/spdxcheck.py -d kernel/
Incomplete directories: SPDX in Files
./kernel : 111 of 114 97%
./kernel/bpf : 43 of 45 95%
./kernel/bpf/preload : 4 of 5 80%
./kernel/bpf/preload/iterators : 4 of 5 80%
./kernel/cgroup : 10 of 13 76%
./kernel/configs : 0 of 9 0%
./kernel/debug : 3 of 4 75%
./kernel/debug/kdb : 1 of 11 9%
./kernel/locking : 29 of 32 90%
./kernel/sched : 38 of 39 97%
The result can be accumulated by restricting the depth via the new command
line option '-d $DEPTH':
# scripts/spdxcheck.py -d -D1
Incomplete directories: SPDX in Files
./ : 6 of 13 46%
./Documentation : 4096 of 8451 48%
./arch : 13476 of 16402 82%
./block : 100 of 101 99%
./certs : 11 of 14 78%
./crypto : 145 of 176 82%
./drivers : 24682 of 30745 80%
./fs : 1876 of 2110 88%
./include : 5175 of 5757 89%
./ipc : 12 of 13 92%
./kernel : 493 of 527 93%
./lib : 393 of 524 75%
./mm : 151 of 159 94%
./net : 1713 of 1900 90%
./samples : 211 of 273 77%
./scripts : 341 of 435 78%
./security : 241 of 250 96%
./sound : 2438 of 2503 97%
./tools : 3810 of 5462 69%
./usr : 9 of 10 90%
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add generic support for try_cmpxchg64{,_acquire,_release,_relaxed}
and their falbacks involving cmpxchg64.
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20220515184205.103089-2-ubizjak@gmail.com
Before version 14.0.0 llvm's integrated assembler fails to handle some
displacement variants:
arch/s390/purgatory/head.S:108:10: error: invalid operand for instruction
lg %r11,kernel_type-.base_crash(%r13)
Instead of working around this and given that this is already fixed
raise the minimum clang version from 13.0.0 to 14.0.0.
Acked-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Link: https://reviews.llvm.org/D113341
Link: https://lore.kernel.org/r/20220511120532.2228616-9-hca@linux.ibm.com
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
With all randstruct exceptions removed, remove all the exception
handling code. Any future warnings are likely to be shared between
this plugin and Clang randstruct, and will need to be addressed in a
more wholistic fashion.
Cc: Christoph Hellwig <hch@infradead.org>
Cc: linux-hardening@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
While preparing for Clang randstruct support (which duplicated many of
the warnings the randstruct GCC plugin warned about), one strange one
remained only for the randstruct GCC plugin. Eliminating this rids
the plugin of the last exception.
It seems the plugin is happy to dereference individual members of
a cross-struct cast, but it is upset about casting to a whole object
pointer. This only manifests in one place in the kernel, so just replace
the variable with individual member accesses. There is no change in
executable instruction output.
Drop the last exception from the randstruct GCC plugin.
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Cong Wang <cong.wang@bytedance.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: netdev@vger.kernel.org
Cc: linux-hardening@vger.kernel.org
Acked-by: Kuniyuki Iwashima <kuniyu@amazon.co.jp>
Link: https://lore.kernel.org/lkml/20220511022217.58586-1-kuniyu@amazon.co.jp
Acked-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/lkml/20220511151542.4cb3ff17@kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Clang randstruct gets upset when it sees struct addresspace (which is
randomized) being assigned to a struct page (which is not randomized):
drivers/net/ethernet/sun/niu.c:3385:12: error: casting from randomized structure pointer type 'struct address_space *' to 'struct page *'
*link = (struct page *) page->mapping;
^
It looks like niu.c is looking for an in-line place to chain its allocated
pages together and is overloading the "mapping" member, as it is unused.
This is very non-standard, and is expected to be cleaned up in the
future[1], but there is no "correct" way to handle it today.
No meaningful machine code changes result after this change, and source
readability is improved.
Drop the randstruct exception now that there is no "confusing" cross-type
assignment.
[1] https://lore.kernel.org/lkml/YnqgjVoMDu5v9PNG@casper.infradead.org/
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Du Cheng <ducheng2@gmail.com>
Cc: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: William Kucharski <william.kucharski@oracle.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: netdev@vger.kernel.org
Cc: linux-mm@kvack.org
Cc: linux-hardening@vger.kernel.org
Acked-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/lkml/20220511151647.7290adbe@kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
The randstruct GCC plugin gets upset when it sees struct path (which is
randomized) being assigned from a "void *" (which it cannot type-check).
There's no need for these casts, as the entire internal payload use is
following a normal struct layout. Convert the enum-based void * offset
dereferencing to the new big_key_payload struct. No meaningful machine
code changes result after this change, and source readability is improved.
Drop the randstruct exception now that there is no "confusing" cross-type
assignment.
Cc: David Howells <dhowells@redhat.com>
Cc: Eric Biggers <ebiggers@kernel.org>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Jarkko Sakkinen <jarkko@kernel.org>
Cc: James Morris <jmorris@namei.org>
Cc: "Serge E. Hallyn" <serge@hallyn.com>
Cc: linux-hardening@vger.kernel.org
Cc: keyrings@vger.kernel.org
Cc: linux-security-module@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
There have been some recent reports of faddr2line failures:
$ scripts/faddr2line sound/soundcore.ko sound_devnode+0x5/0x35
bad symbol size: base: 0x0000000000000000 end: 0x0000000000000000
$ ./scripts/faddr2line vmlinux.o enter_from_user_mode+0x24
bad symbol size: base: 0x0000000000005fe0 end: 0x0000000000005fe0
The problem is that faddr2line is based on 'nm', which has a major
limitation: it doesn't know how to distinguish between different text
sections. So if an offset exists in multiple text sections in the
object, it may fail.
Rewrite faddr2line to be section-aware, by basing it on readelf.
Fixes: 67326666e2 ("scripts: add script for translating stack dump function offsets")
Reported-by: Kaiwan N Billimoria <kaiwan.billimoria@gmail.com>
Reported-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Link: https://lore.kernel.org/r/29ff99f86e3da965b6e46c1cc2d72ce6528c17c3.1652382321.git.jpoimboe@kernel.org
There were more EXPORT_SYMBOL types in the past. The following commits
removed unused ones.
- f1c3d73e97 ("module: remove EXPORT_SYMBOL_GPL_FUTURE")
- 367948220f ("module: remove EXPORT_UNUSED_SYMBOL*")
There are 3 remaining in enum export, but export_unknown does not make
any sense because we never expect such a situation like "we do not know
how it was exported".
If the symbol name starts with "__ksymtab_", but the section name
does not start with "___ksymtab+" or "___ksymtab_gpl+", it is not an
exported symbol.
It occurs when a variable starting with "__ksymtab_" is directly defined:
int __ksymtab_foo;
Presumably, there is no practical issue for using such a weird variable
name (but there is no good reason for doing so, either).
Anyway, that is not an exported symbol. Setting export_unknown is not
the right thing to do. Do not call sym_add_exported() in this case.
With pointless export_unknown removed, the export type finally becomes
boolean (either EXPORT_SYMBOL or EXPORT_SYMBOL_GPL).
I renamed the field name to is_gpl_only. EXPORT_SYMBOL_GPL sets it true.
Only GPL-compatible modules can use it.
I removed the orphan comment, "How a symbol is exported", which is
unrelated to sec_mismatch_count. It is about enum export.
See commit bd5cbcedf4 ("kbuild: export-type enhancement to modpost.c")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
Tested-by: Nathan Chancellor <nathan@kernel.org>
This is a remnant of commit 6543becf26 ("mod/file2alias: make
modalias generation safe for cross compiling").
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
When CONFIG_MODVERSIONS=y, the output from genksyms is saved in
separate *.symversions files, and will be used much later when
CONFIG_LTO_CLANG=y because it is impossible to update LLVM bit code
here.
This approach is not robust because:
- *.symversions may or may not exist. If *.symversions does not
exist, we never know if it is missing for legitimate reason
(i.e. no EXPORT_SYMBOL) or something bad has happened (for
example, the user accidentally deleted it). Once it occurs,
it is not self-healing because *.symversions is generated
as a side effect.
- stale (i.e. invalid) *.symversions might be picked up if an
object is generated in a non-ordinary way, and corresponding
*.symversions (, which was generated by old builds) just happen
to exist.
A more robust approach is to save symbol versions in *.cmd files
because:
- *.cmd always exists (if the object is generated by if_changed
rule or friends). Even if the user accidentally deletes it,
it will be regenerated in the next build.
- *.cmd is always re-generated when the object is updated. This
avoid stale version information being picked up.
I will remove *.symversions later.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Tested-by: Nicolas Schier <nicolas@fjasle.eu>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
Tested-by: Nathan Chancellor <nathan@kernel.org>
A *.mod file lists the member objects of a module, but vmlinux does
not have such a file.
Generate this list to allow modpost to know all the member objects.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
Tested-by: Nathan Chancellor <nathan@kernel.org>
A later commit will add more code to this list_for_each_entry loop.
Before that, move the loop body into a separate helper function.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
Tested-by: Nathan Chancellor <nathan@kernel.org>
add_intree_flag(), add_retpoline(), and add_staging_flag() are small
enough to be merged into add_header().
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
Tested-by: Nathan Chancellor <nathan@kernel.org>
If the new-kernel-pkg utility isn't present, try using kernel-install.
This is what the %preun scriptlet in scripts/package/mkspec does too.
Signed-off-by: Reza Arbab <arbab@linux.ibm.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Many architectures have similar install.sh scripts.
The first half is really generic; it verifies that the kernel image
and System.map exist, then executes ~/bin/${INSTALLKERNEL} or
/sbin/${INSTALLKERNEL} if available.
The second half is kind of arch-specific; it copies the kernel image
and System.map to the destination, but the code is slightly different.
Factor out the generic part into scripts/install.sh.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <n.schier@avm.de>
It's not meaningful for the GCC plugins to track their versions separately
from the rest of the kernel. Switch all versions to the kernel version.
Fix mismatched indenting while we're at it.
Cc: linux-hardening@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
To enable Clang randstruct support, move the structure layout
randomization seed generation out of scripts/gcc-plugins/ into
scripts/basic/ so it happens early enough that it can be used by either
compiler implementation. The gcc-plugin still builds its own header file,
but now does so from the common "randstruct.seed" file.
Cc: linux-hardening@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20220503205503.3054173-6-keescook@chromium.org
In preparation for Clang supporting randstruct, reorganize the Kconfigs,
move the attribute macros, and generalize the feature to be named
CONFIG_RANDSTRUCT for on/off, CONFIG_RANDSTRUCT_FULL for the full
randomization mode, and CONFIG_RANDSTRUCT_PERFORMANCE for the cache-line
sized mode.
Cc: linux-hardening@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20220503205503.3054173-4-keescook@chromium.org
When the sancov_plugin is enabled, it gets added to gcc-plugin-y which
is used to populate both GCC_PLUGIN (for building the plugin) and
GCC_PLUGINS_CFLAGS (for enabling and options). Instead of adding sancov
to both and then removing it from GCC_PLUGINS_CFLAGS, create a separate
list, gcc-plugin-external-y, which is only added to GCC_PLUGIN.
This will also be used by the coming randstruct build changes.
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: linux-kbuild@vger.kernel.org
Cc: linux-hardening@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20220503205503.3054173-3-keescook@chromium.org
new_symbol() does two things; allocate a new symbol and register it
to the hash table.
Using a separate function for each is easier to understand.
Replace new_symbol() with hash_add_symbol(). Remove the second parameter
of alloc_symbol().
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Currently, sym_add_exported() does not allocate a symbol if the same
name symbol already exists in the hash table.
This does not reflect the real use cases. You can let an external
module override the in-tree one. In this case, the external module
will export the same name symbols as the in-tree one. However,
modpost simply ignores those symbols, then Module.symvers for the
external module loses its symbols.
sym_add_exported() should allocate a new symbol.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
This is currently a warning, but I think modpost should stop building
in this case.
If the same symbol is exported multiple times and we let it keep going,
the sanity check becomes difficult.
Only the legitimate case is that an external module overrides the
corresponding in-tree module to provide a different implementation
with the same interface.
Also, there exists an upstream example that exploits this feature.
$ make M=tools/testing/nvdimm
... builds tools/testing/nvdimm/libnvdimm.ko. This is a mocked module
that overrides the symbols from drivers/nvdimm/libnvdimm.ko.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
modpost dumps the exported symbols into Module.symvers, but currently
in random order because it iterates in the hash table.
Add a linked list of exported symbols in struct module, so we can
iterate on symbols per module.
This commit makes Module.symvers much more readable; the outer loop in
write_dump() iterates over the modules in the order of modules.order,
and the inner loop dumps symbols in each module.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Use the doubly linked list to traverse the list in the added order.
This makes the code more consistent.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
This looks easier to understand (just because this is a pattern in
the kernel code). No functional change is intended.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Currently, modpost manages unresolved in a singly linked list; it adds
a new node to the head, and traverses the list from new to old.
Use a doubly linked list to keep the order in the symbol table in the
ELF file.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Add a small helper, sym_add_unresolved() to ease the further
refactoring.
Remove the 'weak' argument from alloc_symbol() because it is sensible
only for unresolved symbols.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Currently, modpost manages modules in a singly linked list; it adds
a new node to the head, and traverses the list from new to old.
It works, but the error messages are shown in the reverse order.
If you have a Makefile like this:
obj-m += foo.o bar.o
then, modpost shows error messages in bar.o, foo.o, in this order.
Use a doubly linked list to keep the order in modules.order; use
list_add_tail() for the node addition and list_for_each_entry() for
the list traverse.
Now that the kernel's list macros have been imported to modpost, I will
use them actively going forward.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Import include/linux/list.h to use convenient list macros in modpost.
I dropped kernel-space code such as {WRITE,READ}_ONCE etc. and unneeded
macros.
I also imported container_of() from include/linux/container_of.h and
type definitions from include/linux/types.h.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Currently, mod->gpl_compatible is tristate; it is set to -1 by default,
then to 1 or 0 when MODULE_LICENSE() is found.
Maybe, -1 was chosen to represent the 'unknown' license, but it is not
useful.
The current code:
if (!mod->gpl_compatible)
check_for_gpl_usage(exp->export, basename, exp->name);
... only cares whether gpl_compatible is zero or not.
Change it to a bool type with the initial value 'true', which has no
functional change.
The default value should be 'true' instead of 'false'.
Since commit 1d6cd39293 ("modpost: turn missing MODULE_LICENSE() into
error"), unknown module license is an error.
The error message, "missing MODULE_LICENSE()" is enough to explain the
issue. It is not sensible to show another message, "GPL-incompatible
module ... uses GPL-only symbol".
Add comments to explain this.
While I was here, I renamed gpl_compatible to is_gpl_compatible for
clarification, and also slightly refactored the code.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Use 'bool' to clarify that the valid value is true or false.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
I think this hack is a bad idea. arch/powerpc/boot/Makefile is the
only and last user. Let's stop doing this.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
There is no good reason to define struct namespace_list in modpost.h
struct module has pointers to struct namespace_list, but that does
not require the definition of struct namespace_list.
Move it to modpost.c.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Do not repeat the similar code.
It is simpler to do this in check_exports() instead of add_versions().
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
It took me a while to understand the intent of "exp->module == mod".
This code goes back to 2003. [1]
The commit is not in this git repository, and might be worth a little
explanation.
You can add EXPORT_SYMBOL() without having its definition in the same
file (but you need to put a declaration).
This is typical when EXPORT_SYMBOL() is added in a C file, but the
actual implementation is in a separate assembly file.
One example is arch/arm/kernel/armksyms.c
In the old days, EXPORT_SYMBOL() was only available in C files (but
this limitation does not exist any more). If you forget to add the
definition, this error occurs.
Add a separate, clearer message for this case. It should be an error
even if KBUILD_MODPOST_WARN is given.
[1]: https://git.kernel.org/pub/scm/linux/kernel/git/history/history.git/commit/?id=2763b6bcb96e6a38a2fe31108fe5759ec5bcc80a
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
The description,
it may have already been added without a
CRC, in this case just update the CRC
... is no longer valid.
In the old days, this function was used to update the CRC as well.
Commit 040fcc819a ("kbuild: improved modversioning support for
external modules") started to use a separate function (sym_update_crc)
for updating the CRC.
The first part, "Add an exported symbol" is correct, but it is too
obvious from the function name. Drop this comment entirely.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
If an error occurs, modpost will fail anyway. Do not write out
any content (, which might be invalid).
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Use snprintf() to avoid the potential buffer overflow, and also
check the return value to detect the too long path.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
The macros defined in this file are for testing only and are purposely
not used. When compiled with W=2, both gcc and clang yield some
-Wunused-macros warnings. Ignore them.
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
CONFIG_PAHOLE_VERSION is a part of a config since the commit below. And
when multiple people update the config, this value constantly changes.
Even if they use dummy scripts.
To fix this, add a pahole dummy script returning v99.99. (This is
translated into 9999 later in the process.)
Thereafter, this script can be invoked easily for example as:
make PAHOLE=scripts/dummy-tools/pahole oldconfig
Fixes: 613fe16923 (kbuild: Add CONFIG_PAHOLE_VERSION)
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
When developing new code/feature, CONFIG_WERROR is most
often turned off, especially for people using make W=12 to
get more warnings.
In such case, turning on -Werror temporarily would require
switching on CONFIG_WERROR in the configuration, building,
then switching off CONFIG_WERROR.
For this use case, this patch introduces a new 'e' modifier
to W= as a short hand for KCFLAGS+=-Werror" so that -Werror
got added to the kernel (built-in) and modules' CFLAGS.
Signed-off-by: Yann Droneaud <ydroneaud@opteya.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
ld and ar support @file, which command-line options are read from.
Now that *.mod lists the member objects in the correct order, without
duplication, it is ready to be passed to ld and ar.
By using the @file syntax, people will not be worried about the pitfall
described in the NOTE.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
The dependency
$(obj)/%.mod: $(obj)/%$(mod-prelink-ext).o
... exists because *.mod files previously contained undefined symbols,
which are computed from *.o files when CONFIG_TRIM_UNUSED_KSYMS=y.
Now that the undefined symbols are put into separate *.usyms files,
there is no reason to make *.mod depend on *.o files.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
It is allowed to add the same objects multiple times to obj-y / obj-m:
obj-y += foo.o foo.o foo.o
obj-m += bar.o bar.o bar.o
It is also allowed to add the same objects multiple times to a composite
module:
obj-m += foo.o
foo-y := foo1.o foo2.o foo2.o foo1.o
This flexibility is useful because the same object might be selected by
different CONFIG options, like this:
obj-m += foo.o
foo-y := foo1.o
foo-$(CONFIG_FOO_X) += foo2.o
foo-$(CONFIG_FOO_Y) += foo2.o
The duplicated objects are omitted at link time. It works naturally in
Makefiles because GNU Make removes duplication in $^ without changing
the order.
It is working well, almost...
A small flaw I notice is, *.mod contains duplication in such a case.
This is probably not a big deal. As far as I know, the only small
problem is scripts/mod/sumversion.c parses the same file multiple
times.
I am fixing this because I plan to reuse *.mod for other purposes,
where the duplication can be problematic.
The code change is quite simple. We already use awk to drop duplicated
lines in modules.order (see cmd_modules_order in the same file).
I copied the code, but changed RS to use spaces as record separators.
I also changed the file format to list one object per line.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
The *.mod files have two lines; the first line lists the member objects
of the module, and the second line, if CONFIG_TRIM_UNUSED_KSYMS=y, lists
the undefined symbols.
Currently, we generate *.mod after constructing composite modules,
otherwise, we cannot compute the second line. No prerequisite is
required to print the first line.
They are orthogonal. Splitting them into separate commands will ease
further cleanups.
This commit splits the list of undefined symbols out to *.usyms files.
Previously, the list of undefined symbols ended up with a very long
line, but now it has one symbol per line.
Use sed like we did before commit 7d32358be8 ("kbuild: avoid split
lines in .mod files").
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
The first command in cmd_mod is similar to the real-search macro.
Reuse it.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Precisely speaking, when you get the stem of the path, you should use
$(patsubst $(obj)/%,%,...) instead of $(notdir ...).
I do not see this usecase, but if you create a composite object in a
subdirectory, the Makefile should look like this:
obj-$(CONFIG_FOO) += dir/foo.o
dir/foo-objs := dir/foo1.o dir/foo2.o
The member objects should be assigned to dir/foo-objs instead of
foo-objs.
This syntax is more consistent with commit 54b8ae66ae ("kbuild:
change *FLAGS_<basetarget>.o to take the path relative to $(obj)").
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
The complicated part of multi_depend is the same as suffix-search.
Reuse it.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Split the code into two macros, cmd_gen_symversions_S for running
genksyms, and cmd_modversions for running $(LD) to update the object
with CRCs.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
cmd_modversions_c implements two parts; run genksyms to calculate CRCs
of exported symbols, run $(LD) to update the object with the CRCs. The
latter is not executed for CONFIG_LTO_CLANG=y since the object is not
ELF but LLVM bit code at this point.
The first part can be unified because we can always use $(NM) instead
of "$(OBJDUMP) -h" to dump the symbols.
Split the code into the two macros, cmd_gen_symversions_c and
cmd_modversions.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
There are two call sites for sym_update_namespace().
When the symbol has no namespace, s->namespace is set to NULL,
but the conversion from "" to NULL is done in two different places.
[1] read_symbols()
This gets the namespace from __kstrtabns_<symbol>. If the symbol has
no namespace, sym_get_data(info, sym) returns the empty string "".
namespace_from_kstrtabns() converts it to NULL before it is passed to
sym_update_namespace().
[2] read_dump()
This gets the namespace from the dump file, *.symvers. If the symbol
has no namespace, the 'namespace' is the empty string "", which is
directly passed into sym_update_namespace(). The conversion from
"" to NULL is done in sym_update_namespace().
namespace_from_kstrtabns() exists only for creating this inconsistency.
Remove namespace_from_kstrtabns() so that sym_update_namespace() is
consistently passed with "" instead of NULL.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
These are initialized with zeros without explicit initializers.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
The assigned 'export' is only used when
if (strstarts(symname, "__ksymtab_"))
is met. The else-part of the assignment is the dead code.
Move the export_from_secname() call to where it is used.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
With commit 1743694eb2 ("modpost: stop symbol preloading for
modversion CRC") applied, now export_from_sec() is useless.
handle_symbol() is called for every symbol in the ELF.
When 'symname' does not start with "__ksymtab", export_from_sec() is
called, and the returned value is stored in 'export'.
It is used in the last part of handle_symbol():
if (strstarts(symname, "__ksymtab_")) {
name = symname + strlen("__ksymtab_");
sym_add_exported(name, mod, export);
}
'export' is used only when 'symname' starts with "__ksymtab_".
So, the value returned by export_from_sec() is never used.
Remove useless export_from_sec(). This makes further cleanups possible.
I put the temporary code:
export = export_unknown;
Otherwise, I would get the compiler warning:
warning: 'export' may be used uninitialized in this function [-Wmaybe-uninitialized]
This is apparently false positive because
if (strstarts(symname, "__ksymtab_")
... is a stronger condition than:
if (strstarts(symname, "__ksymtab")
Anyway, this part will be cleaned up by the next commit.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
The arrays for the policy capability names, the initial sid identifiers
and the class and permission names are not changed at runtime. Declare
them const to avoid accidental modification.
Do not override the classmap and the initial sid list in the build time
script genheaders.
Check flose(3) is successful in genheaders.c, otherwise the written data
might be corrupted or incomplete.
Signed-off-by: Christian Göttsche <cgzones@googlemail.com>
[PM: manual merge due to fuzz, minor style tweaks]
Signed-off-by: Paul Moore <paul@paul-moore.com>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmJu9FYeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGAyEH/16xtJSpLmLwrQzG
o+4ToQxSQ+/9UHyu0RTEvHg2THm9/8emtIuYyc/5FgdoWctcSa3AaDcveWmuWmkS
KYcdhfJsaEqjNHS3OPYXN84fmo9Hel7263shu5+IYmP/sN0DfQp6UWTryX1q4B3Q
4Pdutkuq63Uwd8nBZ5LXQBumaBrmkkuMgWEdT4+6FOo1mPzwdIGBxCuz1UsNNl5k
chLWxkQfe2eqgWbYJrgCQfrVdORXVtoU2fGilZUNrHRVGkkldXkkz5clJfapyZD3
odmZCEbrE4GPKgZwCmDERMfD1hzhZDtYKiHfOQ506szH5ykJjPBcOjHed7dA60eB
J3+wdek=
=39Ca
-----END PGP SIGNATURE-----
Merge 5.18-rc5 into char-misc-next
We need the char-misc fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add support to also use the mailmap for 'in file' email addresses.
Link: https://lkml.kernel.org/r/20220323193645.317514-1-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Reported-by: Marc Zyngier <maz@kernel.org>
Acked-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Seeing it as a false positive increase at the top is just noise:
linux-head$./scripts/bloat-o-meter ../pre/vmlinux ../post/vmlinux
add/remove: 0/571 grow/shrink: 1/9 up/down: 20/-64662 (-64642)
Function old new delta
vermagic 49 69 +20
Since it really doesn't "grow", it makes sense to filter it out.
Link: https://lkml.kernel.org/r/20220428035824.7934-1-paul.gortmaker@windriver.com
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Old bash version don't support associative array variables. Avoid to use
associative array variables to avoid error.
Without this, old bash version will report error as fellowing
[ 15.954042] Kernel panic - not syncing: sysrq triggered crash
[ 15.955252] CPU: 1 PID: 167 Comm: sh Not tainted 5.18.0-rc1-00208-gb7d075db2fd5 #4
[ 15.956472] Hardware name: Hobot J5 Virtual development board (DT)
[ 15.957856] Call trace:
./scripts/decode_stacktrace.sh: line 128: ,dump_backtrace: syntax error: operand expected (error token is ",dump_backtrace")
Link: https://lkml.kernel.org/r/20220409180331.24047-1-schspa@gmail.com
Signed-off-by: Schspa Shi <schspa@gmail.com>
Cc: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reintroduce the __kvm_nvhe_ symbols in kallsyms, ignoring the local
symbols in this namespace. The local symbols are not informative and
can cause aliasing issues when symbolizing the addresses.
With the necessary symbols now in kallsyms we can symbolize nVHE
addresses using the %p print format specifier:
[ 98.916444][ T426] kvm [426]: nVHE hyp panic at: [<ffffffc0096156fc>] __kvm_nvhe_overflow_stack+0x8/0x34!
Signed-off-by: Kalesh Singh <kaleshsingh@google.com>
Tested-by: Fuad Tabba <tabba@google.com>
Reviewed-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220420214317.3303360-7-kaleshsingh@google.com
Add uevent support to MHI endpoint bus so that the client drivers can be
autoloaded by udev when the MHI endpoint devices gets created. The client
drivers are expected to provide MODULE_DEVICE_TABLE with the MHI id_table
struct so that the alias can be exported.
The MHI endpoint reused the mhi_device_id structure of the MHI bus.
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20220405135754.6622-19-manivannan.sadhasivam@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
kvmalloc() and kvzalloc() functions have now 2-factor multiplication
argument forms kvmalloc_array() and kvcalloc(), correspondingly.
Add alloc-with-multiplies checks for these new functions.
Link: https://github.com/KSPP/linux/issues/187
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
The help message of 'get_abi.pl' is mistakenly saying it's
'abi_book.pl'. This commit fixes the wrong name in the help message.
Fixes: bbc249f2b8 ("scripts: add an script to parse the ABI files")
Signed-off-by: SeongJae Park <sj@kernel.org>
Link: https://lore.kernel.org/r/20220419121636.290407-1-sj@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The '--lto' option is a confusing way of telling objtool to do stack
validation despite it being a linked object. It's no longer needed now
that an explicit '--stackval' option exists. The '--vmlinux' option is
also redundant.
Remove both options in favor of a straightforward '--link' option which
identifies a linked object.
Also, implicitly set '--link' with a warning if the user forgets to do
so and we can tell that it's a linked object. This makes it easier for
manual vmlinux runs.
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Link: https://lkml.kernel.org/r/dcd3ceffd15a54822c6183e5766d21ad06082b45.1650300597.git.jpoimboe@redhat.com
CONFIG_VMLINUX_VALIDATION is just the validation of the "noinstr" rules.
That name is a misnomer, because now objtool actually does vmlinux
validation for other reasons.
Rename CONFIG_VMLINUX_VALIDATION to CONFIG_NOINSTR_VALIDATION.
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Link: https://lkml.kernel.org/r/173f07e2d6d1afc0874aed975a61783207c6a531.1650300597.git.jpoimboe@redhat.com
Objtool has some hacks in place to workaround toolchain limitations
which otherwise would break no-instrumentation rules. Make the hacks
explicit (and optional for other arches) by turning it into a cmdline
option and kernel config option.
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Link: https://lkml.kernel.org/r/b326eeb9c33231b9dfbb925f194ed7ee40edcd7c.1650300597.git.jpoimboe@redhat.com
Objtool secretly does a jump label hack to overcome the limitations of
the toolchain. Make the hack explicit (and optional for other arches)
by turning it into a cmdline option and kernel config option.
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Link: https://lkml.kernel.org/r/3bdcbfdd27ecb01ddec13c04bdf756a583b13d24.1650300597.git.jpoimboe@redhat.com
Now that CONFIG_STACK_VALIDATION is frame-pointer specific, do the same
for the '--stackval' option. Now the '--no-fp' option is redundant and
can be removed.
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Link: https://lkml.kernel.org/r/f563fa064b3b63d528de250c72012d49e14742a3.1650300597.git.jpoimboe@redhat.com
Now that stack validation is an optional feature of objtool, add
CONFIG_OBJTOOL and replace most usages of CONFIG_STACK_VALIDATION with
it.
CONFIG_STACK_VALIDATION can now be considered to be frame-pointer
specific. CONFIG_UNWINDER_ORC is already inherently valid for live
patching, so no need to "validate" it.
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Link: https://lkml.kernel.org/r/939bf3d85604b2a126412bf11af6e3bd3b872bcb.1650300597.git.jpoimboe@redhat.com
Objtool has a fairly singular focus. It runs on object files and does
validations and transformations which can be combined in various ways.
The subcommand model has never been a good fit, making it awkward to
combine and remove options.
Remove the "check" and "orc" subcommands in favor of a more traditional
cmdline option model. This makes it much more flexible to use, and
easier to port individual features to other arches.
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Link: https://lkml.kernel.org/r/5c61ebf805e90aefc5fa62bc63468ffae53b9df6.1650300597.git.jpoimboe@redhat.com
Split the existing options into two groups: actions, which actually do
something; and options, which modify the actions in some way.
Also there's no need to have short flags for all the non-action options.
Reserve short flags for the more important actions.
While at it:
- change a few of the short flags to be more intuitive
- make option descriptions more consistently descriptive
- sort options in the source like they are when printed
- move options to a global struct
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Link: https://lkml.kernel.org/r/9dcaa752f83aca24b1b21f0b0eeb28a0c181c0b0.1650300597.git.jpoimboe@redhat.com
With IBT support in, objtool is now fully capable of following vmlinux
code flow in LTO mode. Start reporting unreachable warnings for Clang
LTO as well.
Fixes: ed53a0d971 ("x86/alternative: Use .ibt_endbr_seal to seal indirect calls")
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/7b12df54bceeb0761fe9fc8269ea0c00501214a9.1650300597.git.jpoimboe@redhat.com
The initialization of "security_hook_heads" is done by casting it to
another structure pointer type, and treating it as an array of "struct
hlist_head" objects. This requires an exception be made in "randstruct",
because otherwise it will emit an error, reducing the effectiveness of
the hardening technique.
Instead of using a cast, initialize the individual struct hlist_head
elements in security_hook_heads explicitly. This removes the need for
the cast and randstruct exception.
Signed-off-by: Bill Wendling <morbo@google.com>
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20220407175930.471870-1-morbo@google.com
While the latent entropy plugin mostly doesn't derive entropy from
get_random_const() for measuring the call graph, when __latent_entropy is
applied to a constant, then it's initialized statically to output from
get_random_const(). In that case, this data is derived from a 64-bit
seed, which means a buffer of 512 bits doesn't really have that amount
of compile-time entropy.
This patch fixes that shortcoming by just buffering chunks of
/dev/urandom output and doling it out as requested.
At the same time, it's important that we don't break the use of
-frandom-seed, for people who want the runtime benefits of the latent
entropy plugin, while still having compile-time determinism. In that
case, we detect whether gcc's set_random_seed() has been called by
making a call to get_random_seed(noinit=true) in the plugin init
function, which is called after set_random_seed() is called but before
anything that calls get_random_seed(noinit=false), and seeing if it's
zero or not. If it's not zero, we're in deterministic mode, and so we
just generate numbers with a basic xorshift prng.
Note that we don't detect if -frandom-seed is being used using the
documented local_tick variable, because it's assigned via:
local_tick = (unsigned) tv.tv_sec * 1000 + tv.tv_usec / 1000;
which may well overflow and become -1 on its own, and so isn't
reliable: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=105171
[kees: The 256 byte rnd_buf size was chosen based on average (250),
median (64), and std deviation (575) bytes of used entropy for a
defconfig x86_64 build]
Fixes: 38addce8b6 ("gcc-plugins: Add latent_entropy plugin")
Cc: stable@vger.kernel.org
Cc: PaX Team <pageexec@freemail.hu>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20220405222815.21155-1-Jason@zx2c4.com
Presumably, 'test -s $@ || rm -f $@' intends to remove the output when
the genksyms command fails.
It is unneeded because .DELETE_ON_ERROR automatically removes the output
on failure.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
The genksyms command part in cmd_gensymtypes_{c,S} is duplicated.
Factor it out into the 'genksyms' macro.
For the readability, I slightly refactor the arguments to genksyms.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
Add HOSTPKG_CONFIG to allow tooling that builds the kernel to override
what pkg-config and parameters are used.
Signed-off-by: Chun-Tse Shao <ctshao@google.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Those were added as part of the SMAP enablement but SMAP is currently
an integral part of kernel proper and there's no need to disable it
anymore.
Rip out that functionality. Leave --uaccess default on for objtool as
this is what objtool should do by default anyway.
If still needed - clearcpuid=smap.
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Lai Jiangshan <jiangshanlai@gmail.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20220127115626.14179-4-bp@alien8.de
This log message was accidentally chopped off.
I was wondering why this happened, but checking the ML log, Mark
precisely followed my suggestion [1].
I just used "..." because I was too lazy to type the sentence fully.
Sorry for the confusion.
[1]: https://lore.kernel.org/all/CAK7LNAR6bXXk9-ZzZYpTqzFqdYbQsZHmiWspu27rtsFxvfRuVA@mail.gmail.com/
Fixes: 4a6795933a ("kbuild: modpost: Explicitly warn about unprototyped symbols")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
The two commits
d8d2d38275 ("kbuild: remove PYTHON variable")
a8cccdd954 ("init: lto: ensure initcall ordering")
were applied in the same development cycle, into two different trees.
After they were merged together, this ${PYTHON} expands to an empty
string.
Therefore, ${srctree}/scripts/jobserver-exec is executed directly.
(it has the executable bit set)
This is working but let's fix the code into the intended form.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Sedat Dilek <sedat.dilek@gmail.com>
This comment is about kconfig_print_symbol(), which was removed by
commit 6ce45a91a9 ("kconfig: refactor conf_write_symbol()").
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
fixes from Mauro and Akira; I also took the liberty of dropping in my
"messy diffstat" document.
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEIw+MvkEiF49krdp9F0NaE2wMflgFAmJFzSkPHGNvcmJldEBs
d24ubmV0AAoJEBdDWhNsDH5Yyp0H/jnK0edIgumAwGMBb2IeVImKsV8IU4Gdw1yo
RgetPAWP/i/KqR1JczLnwd+K/0KuOb1nifJO8MfCwN2GowlOdg5WuHkBfkUhoUy8
LK+Z1E7HN3riveBJKxRyOXTxvFkDVm8aD8s3C3NZjX1Tz8Xwe7v69YDJ3MCSBHZb
TxiffdSdBgDbL6A3nnH7fwUW94l0fv3RWhXU8ddW3i7rEmjafXlV+8MHniY1EGNz
r2Ej4J9/vdLIT37yl9vb28D45HdS937h4aQKhJJ7ZzLnwuOkgDUJ7LyL2GepATlN
v2nU0vge8125fDZQPGxJ00S5TITqN8PoQ9dkVRcOlzXR1n9Px70=
=Rbru
-----END PGP SIGNATURE-----
Merge tag 'docs-5.18-2' of git://git.lwn.net/linux
Pull more documentation updates from Jonathan Corbet:
"Some late-arriving documentation improvements.
This is mostly build-system fixes from Mauro and Akira; I also took
the liberty of dropping in my 'messy diffstat' document"
* tag 'docs-5.18-2' of git://git.lwn.net/linux:
docs: Add a document on how to fix a messy diffstat
docs: sphinx/requirements: Limit jinja2<3.1
Documentation: kunit: Fix cross-referencing warnings
scripts/kernel-doc: change the line number meta info
scripts/get_abi: change the file/line number meta info
docs: kernel_include.py: add sphinx build dependencies
docs: kernel_abi.py: add sphinx build dependencies
docs: kernel_feat.py: add build dependencies
scripts/get_feat.pl: allow output the parsed file names
docs: kfigure.py: Don't warn of missing PDF converter in 'make htmldocs'
Documentation: Fix duplicate statement about raw_spinlock_t type
- Add new environment variables, USERCFLAGS and USERLDFLAGS to allow
additional flags to be passed to user-space programs.
- Fix missing fflush() bugs in Kconfig and fixdep
- Fix a minor bug in the comment format of the .config file
- Make kallsyms ignore llvm's local labels, .L*
- Fix UAPI compile-test for cross-compiling with Clang
- Extend the LLVM= syntax to support LLVM=<suffix> form for using a
particular version of LLVm, and LLVM=<prefix> form for using custom
LLVM in a particular directory path.
- Clean up Makefiles
-----BEGIN PGP SIGNATURE-----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=84rW
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v5.18-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Add new environment variables, USERCFLAGS and USERLDFLAGS to allow
additional flags to be passed to user-space programs.
- Fix missing fflush() bugs in Kconfig and fixdep
- Fix a minor bug in the comment format of the .config file
- Make kallsyms ignore llvm's local labels, .L*
- Fix UAPI compile-test for cross-compiling with Clang
- Extend the LLVM= syntax to support LLVM=<suffix> form for using a
particular version of LLVm, and LLVM=<prefix> form for using custom
LLVM in a particular directory path.
- Clean up Makefiles
* tag 'kbuild-v5.18-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kbuild: Make $(LLVM) more flexible
kbuild: add --target to correctly cross-compile UAPI headers with Clang
fixdep: use fflush() and ferror() to ensure successful write to files
arch: syscalls: simplify uapi/kapi directory creation
usr/include: replace extra-y with always-y
certs: simplify empty certs creation in certs/Makefile
certs: include certs/signing_key.x509 unconditionally
kallsyms: ignore all local labels prefixed by '.L'
kconfig: fix missing '# end of' for empty menu
kconfig: add fflush() before ferror() check
kbuild: replace $(if A,A,B) with $(or A,B)
kbuild: Add environment variables for userprogs flags
kbuild: unify cmd_copy and cmd_shipped
Currently, fixdep checks the return value from (v)printf(), but it does
not ensure the complete write to the .cmd file.
printf() just writes data to the internal buffer, which usually succeeds.
(Of course, it may fail for another reason, for example when the file
descriptor is closed, but that is another story.)
When the buffer (4k?) is full, an actual write occurs, and printf() may
really fail. One of typical cases is "No space left on device" when the
disk is full.
The data remaining in the buffer will be pushed out to the file when
the program exits, but we never know if it is successful.
One straight-forward fix would be to add the following code at the end
of the program.
ret = fflush(stdout);
if (ret < 0) {
/* error handling */
}
However, it is tedious to check the return code in all the call sites
of printf(), fflush(), fclose(), and whatever can cause actual writes
to the end device. Doing that lets the program bail out at the first
failure but is usually not worth the effort.
Instead, let's check the error status from ferror(). This is 'sticky',
so you need to check it just once. You still need to call fflush().
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: David Laight <david.laight@aculab.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Such output could be helpful while debugging it, but its main
goal is to tell kernel_feat.py about what files were used
by the script. Thie way, kernel_feat.py can add those as
documentation dependencies.
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Link: https://lore.kernel.org/r/11b438ee01e00c866f5ea197d6aecc26e9f86945.1648290305.git.mchehab@kernel.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Here is the set of driver core changes for 5.18-rc1.
Not much here, primarily it was a bunch of cleanups and small updates:
- kobj_type cleanups for default_groups
- documentation updates
- firmware loader minor changes
- component common helper added and take advantage of it in many
drivers (the largest part of this pull request).
There will be a merge conflict in drivers/power/supply/ab8500_chargalg.c
with your tree, the merge conflict should be easy (take all the
changes).
All of these have been in linux-next for a while with no reported
problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYkG6PA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylMFwCfSIyAU4oLEgj+/Rfmx4o45cAVIWMAnit3zbdU
wUUCGqKcOnTJEcW6dMPh
=1VVi
-----END PGP SIGNATURE-----
Merge tag 'driver-core-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the set of driver core changes for 5.18-rc1.
Not much here, primarily it was a bunch of cleanups and small updates:
- kobj_type cleanups for default_groups
- documentation updates
- firmware loader minor changes
- component common helper added and take advantage of it in many
drivers (the largest part of this pull request).
All of these have been in linux-next for a while with no reported
problems"
* tag 'driver-core-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (54 commits)
Documentation: update stable review cycle documentation
drivers/base/dd.c : Remove the initial value of the global variable
Documentation: update stable tree link
Documentation: add link to stable release candidate tree
devres: fix typos in comments
Documentation: add note block surrounding security patch note
samples/kobject: Use sysfs_emit instead of sprintf
base: soc: Make soc_device_match() simpler and easier to read
driver core: dd: fix return value of __setup handler
driver core: Refactor sysfs and drv/bus remove hooks
driver core: Refactor multiple copies of device cleanup
scripts: get_abi.pl: Fix typo in help message
kernfs: fix typos in comments
kernfs: remove unneeded #if 0 guard
ALSA: hda/realtek: Make use of the helper component_compare_dev_name
video: omapfb: dss: Make use of the helper component_compare_dev
power: supply: ab8500: Make use of the helper component_compare_dev
ASoC: codecs: wcd938x: Make use of the helper component_compare/release_of
iommu/mediatek: Make use of the helper component_compare/release_of
drm: of: Make use of the helper component_release_of
...
coarse grained, hardware based, forward edge Control-Flow-Integrity mechanism
where any indirect CALL/JMP must target an ENDBR instruction or suffer #CP.
Additionally, since Alderlake (12th gen)/Sapphire-Rapids, speculation is
limited to 2 instructions (and typically fewer) on branch targets not starting
with ENDBR. CET-IBT also limits speculation of the next sequential instruction
after the indirect CALL/JMP [1].
CET-IBT is fundamentally incompatible with retpolines, but provides, as
described above, speculation limits itself.
[1] https://www.intel.com/content/www/us/en/developer/articles/technical/software-security-guidance/technical-documentation/branch-history-injection.html
-----BEGIN PGP SIGNATURE-----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=jZfK
-----END PGP SIGNATURE-----
Merge tag 'x86_core_for_5.18_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 CET-IBT (Control-Flow-Integrity) support from Peter Zijlstra:
"Add support for Intel CET-IBT, available since Tigerlake (11th gen),
which is a coarse grained, hardware based, forward edge
Control-Flow-Integrity mechanism where any indirect CALL/JMP must
target an ENDBR instruction or suffer #CP.
Additionally, since Alderlake (12th gen)/Sapphire-Rapids, speculation
is limited to 2 instructions (and typically fewer) on branch targets
not starting with ENDBR. CET-IBT also limits speculation of the next
sequential instruction after the indirect CALL/JMP [1].
CET-IBT is fundamentally incompatible with retpolines, but provides,
as described above, speculation limits itself"
[1] https://www.intel.com/content/www/us/en/developer/articles/technical/software-security-guidance/technical-documentation/branch-history-injection.html
* tag 'x86_core_for_5.18_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (53 commits)
kvm/emulate: Fix SETcc emulation for ENDBR
x86/Kconfig: Only allow CONFIG_X86_KERNEL_IBT with ld.lld >= 14.0.0
x86/Kconfig: Only enable CONFIG_CC_HAS_IBT for clang >= 14.0.0
kbuild: Fixup the IBT kbuild changes
x86/Kconfig: Do not allow CONFIG_X86_X32_ABI=y with llvm-objcopy
x86: Remove toolchain check for X32 ABI capability
x86/alternative: Use .ibt_endbr_seal to seal indirect calls
objtool: Find unused ENDBR instructions
objtool: Validate IBT assumptions
objtool: Add IBT/ENDBR decoding
objtool: Read the NOENDBR annotation
x86: Annotate idtentry_df()
x86,objtool: Move the ASM_REACHABLE annotation to objtool.h
x86: Annotate call_on_stack()
objtool: Rework ASM_REACHABLE
x86: Mark __invalid_creds() __noreturn
exit: Mark do_group_exit() __noreturn
x86: Mark stop_this_cpu() __noreturn
objtool: Ignore extra-symbol code
objtool: Rename --duplicate to --lto
...
- Enable strict FORTIFY_SOURCE compile-time validation of memcpy buffers
- Add Clang features needed for FORTIFY_SOURCE support
- Enable FORTIFY_SOURCE for Clang where possible
-----BEGIN PGP SIGNATURE-----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=8qRJ
-----END PGP SIGNATURE-----
Merge tag 'memcpy-v5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull FORTIFY_SOURCE updates from Kees Cook:
"This series consists of two halves:
- strict compile-time buffer size checking under FORTIFY_SOURCE for
the memcpy()-family of functions (for extensive details and
rationale, see the first commit)
- enabling FORTIFY_SOURCE for Clang, which has had many overlapping
bugs that we've finally worked past"
* tag 'memcpy-v5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
fortify: Add Clang support
fortify: Make sure strlen() may still be used as a constant expression
fortify: Use __diagnose_as() for better diagnostic coverage
fortify: Make pointer arguments const
Compiler Attributes: Add __diagnose_as for Clang
Compiler Attributes: Add __overloadable for Clang
Compiler Attributes: Add __pass_object_size for Clang
fortify: Replace open-coded __gnu_inline attribute
fortify: Update compile-time tests for Clang 14
fortify: Detect struct member overflows in memset() at compile-time
fortify: Detect struct member overflows in memmove() at compile-time
fortify: Detect struct member overflows in memcpy() at compile-time
- Add Krzysztof Kozlowski as co-maintainer for DT bindings providing
much needed help.
- DT schema validation now takes DTB files as input rather than
intermediate YAML files. This decouples the validation from the source
level syntax information. There's a bunch of schema fixes as a result
of switching to DTB based validation which exposed some errors
and incomplete schemas and examples.
- Kbuild improvements to explicitly warn users running 'make
dt_binding_check' on missing yamllint
- Expand DT_SCHEMA_FILES kbuild variable to take just a partial filename
or path instead of the full path to 1 file.
- Convert various bindings to schema format: mscc,vsc7514-switch,
multiple GNSS bindings, ahci-platform, i2c-at91, multiple UFS
bindings, cortina,gemini-sata-bridge, cortina,gemini-ethernet, Atmel
SHA, Atmel TDES, Atmel AES, armv7m-systick, Samsung Exynos display
subsystem, nuvoton,npcm7xx-timer, samsung,s3c2410-i2c, zynqmp_dma,
msm/mdp4, rda,8810pl-uart
- New schemas for u-boot environment variable partition, TI clksel
- New compatible strings for Renesas RZ/V2L SoC
- Vendor prefixes for Xen, HPE, deprecated Synopsys, deprecated HiSilicon
- Add/fix schemas for QEMU Arm 'virt' machine
- Drop unused of_alias_get_alias_list() function
- Add a script to check DT unittest EXPECT message output. Pass messages
also now print by default at PR_INFO level to help test automation.
-----BEGIN PGP SIGNATURE-----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=g1li
-----END PGP SIGNATURE-----
Merge tag 'devicetree-for-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
- Add Krzysztof Kozlowski as co-maintainer for DT bindings providing
much needed help.
- DT schema validation now takes DTB files as input rather than
intermediate YAML files. This decouples the validation from the
source level syntax information. There's a bunch of schema fixes as a
result of switching to DTB based validation which exposed some errors
and incomplete schemas and examples.
- Kbuild improvements to explicitly warn users running 'make
dt_binding_check' on missing yamllint
- Expand DT_SCHEMA_FILES kbuild variable to take just a partial
filename or path instead of the full path to 1 file.
- Convert various bindings to schema format: mscc,vsc7514-switch,
multiple GNSS bindings, ahci-platform, i2c-at91, multiple UFS
bindings, cortina,gemini-sata-bridge, cortina,gemini-ethernet, Atmel
SHA, Atmel TDES, Atmel AES, armv7m-systick, Samsung Exynos display
subsystem, nuvoton,npcm7xx-timer, samsung,s3c2410-i2c, zynqmp_dma,
msm/mdp4, rda,8810pl-uart
- New schemas for u-boot environment variable partition, TI clksel
- New compatible strings for Renesas RZ/V2L SoC
- Vendor prefixes for Xen, HPE, deprecated Synopsys, deprecated
HiSilicon
- Add/fix schemas for QEMU Arm 'virt' machine
- Drop unused of_alias_get_alias_list() function
- Add a script to check DT unittest EXPECT message output. Pass
messages also now print by default at PR_INFO level to help test
automation.
* tag 'devicetree-for-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (96 commits)
dt-bindings: kbuild: Make DT_SCHEMA_LINT a recursive variable
dt-bindings: nvmem: add U-Boot environment variables binding
dt-bindings: ufs: qcom: Add SM6350 compatible string
dt-bindings: dmaengine: sifive,fu540-c000: include generic schema
dt-bindings: gpio: pca95xx: drop useless consumer example
Revert "of: base: Introduce of_alias_get_alias_list() to check alias IDs"
dt-bindings: virtio,mmio: Allow setting devices 'dma-coherent'
dt-bindings: gnss: Add two more chips
dt-bindings: gnss: Rewrite sirfstar binding in YAML
dt-bindings: gnss: Modify u-blox to use common bindings
dt-bindings: gnss: Rewrite common bindings in YAML
dt-bindings: ata: ahci-platform: Add rk3568-dwc-ahci compatible
dt-bindings: ata: ahci-platform: Add power-domains property
dt-bindings: ata: ahci-platform: Convert DT bindings to yaml
dt-bindings: kbuild: Use DTB files for validation
dt-bindings: kbuild: Pass DT_SCHEMA_FILES to dt-validate
dt-bindings: Add QEMU virt machine compatible
dt-bindings: arm: Convert QEMU fw-cfg to DT schema
dt-bindings: i2c: at91: Add SAMA7G5 compatible strings list
dt-bindings: i2c: convert i2c-at91 to json-schema
...
Linus pointed out the benefits of C99 some years ago, especially variable
declarations in loops [1]. At that time, we were not ready for the
migration due to old compilers.
Recently, Jakob Koschel reported a bug in list_for_each_entry(), which
leaks the invalid pointer out of the loop [2]. In the discussion, we
agreed that the time had come. Now that GCC 5.1 is the minimum compiler
version, there is nothing to prevent us from going to -std=gnu99, or even
straight to -std=gnu11.
Discussions for a better list iterator implementation are ongoing, but
this patch set must land first.
[1] https://lore.kernel.org/all/CAHk-=wgr12JkKmRd21qh-se-_Gs69kbPgR9x4C+Es-yJV2GLkA@mail.gmail.com/
[2] https://lore.kernel.org/lkml/86C4CE7D-6D93-456B-AA82-F8ADEACA40B7@gmail.com/
-----BEGIN PGP SIGNATURE-----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=KMDk
-----END PGP SIGNATURE-----
Merge tag 'kbuild-gnu11-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild update for C11 language base from Masahiro Yamada:
"Kbuild -std=gnu11 updates for v5.18
Linus pointed out the benefits of C99 some years ago, especially
variable declarations in loops [1]. At that time, we were not ready
for the migration due to old compilers.
Recently, Jakob Koschel reported a bug in list_for_each_entry(), which
leaks the invalid pointer out of the loop [2]. In the discussion, we
agreed that the time had come. Now that GCC 5.1 is the minimum
compiler version, there is nothing to prevent us from going to
-std=gnu99, or even straight to -std=gnu11.
Discussions for a better list iterator implementation are ongoing, but
this patch set must land first"
[1] https://lore.kernel.org/all/CAHk-=wgr12JkKmRd21qh-se-_Gs69kbPgR9x4C+Es-yJV2GLkA@mail.gmail.com/
[2] https://lore.kernel.org/lkml/86C4CE7D-6D93-456B-AA82-F8ADEACA40B7@gmail.com/
* tag 'kbuild-gnu11-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
Kbuild: use -std=gnu11 for KBUILD_USERCFLAGS
Kbuild: move to -std=gnu11
Kbuild: use -Wdeclaration-after-statement
Kbuild: add -Wno-shift-negative-value where -Wextra is used
- Raise minimum supported machine generation to z10, which comes with
various cleanups and code simplifications (usercopy/spectre
mitigation/etc).
- Rework extables and get rid of anonymous out-of-line fixups.
- Page table helpers cleanup. Add set_pXd()/set_pte() helper
functions. Covert pte_val()/pXd_val() macros to functions.
- Optimize kretprobe handling by avoiding extra kprobe on
__kretprobe_trampoline.
- Add support for CEX8 crypto cards.
- Allow to trigger AP bus rescan via writing to /sys/bus/ap/scans.
- Add CONFIG_EXPOLINE_EXTERN option to build the kernel without COMDAT
group sections which simplifies kpatch support.
- Always use the packed stack layout and extend kernel unwinder tests.
- Add sanity checks for ftrace code patching.
- Add s390dbf debug log for the vfio_ap device driver.
- Various virtual vs physical address confusion fixes.
- Various small fixes and improvements all over the code.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEE3QHqV+H2a8xAv27vjYWKoQLXFBgFAmI94dsACgkQjYWKoQLX
FBiaCggAm9xYJ06Qt9c+T9B7aA4Lt50w7Bnxqx1/Q7UHQQgDpkNhKzI1kt/xeKY4
JgZQ9lJC4YRLlyfIVzffLI2DWGbl8BcTpuRWVLhPI5D2yHZBXr2ARe7IGFJueddy
MVqU/r+U3H0r3obQeUc4TSrHtSRX7eQZWIoVuDU75b9fCniee/bmGZqs6yXPXXh4
pTZQ/gsIhF/o6eBJLEXLjUAcIasxCk15GXWXmkaSwKHAhfYiintwGmtKqQ8etCvw
17vdlTjA4ce+3ooD/hXGPa8TqeiGKsIB2Xr89x/48f1eJyp2zPJZ1ZvAUBHJBCNt
b4sF4ql8303Lj7Be+LeqdlbXfa5PZg==
=meZf
-----END PGP SIGNATURE-----
Merge tag 's390-5.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 updates from Vasily Gorbik:
- Raise minimum supported machine generation to z10, which comes with
various cleanups and code simplifications (usercopy/spectre
mitigation/etc).
- Rework extables and get rid of anonymous out-of-line fixups.
- Page table helpers cleanup. Add set_pXd()/set_pte() helper functions.
Covert pte_val()/pXd_val() macros to functions.
- Optimize kretprobe handling by avoiding extra kprobe on
__kretprobe_trampoline.
- Add support for CEX8 crypto cards.
- Allow to trigger AP bus rescan via writing to /sys/bus/ap/scans.
- Add CONFIG_EXPOLINE_EXTERN option to build the kernel without COMDAT
group sections which simplifies kpatch support.
- Always use the packed stack layout and extend kernel unwinder tests.
- Add sanity checks for ftrace code patching.
- Add s390dbf debug log for the vfio_ap device driver.
- Various virtual vs physical address confusion fixes.
- Various small fixes and improvements all over the code.
* tag 's390-5.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (69 commits)
s390/test_unwind: add kretprobe tests
s390/kprobes: Avoid additional kprobe in kretprobe handling
s390: convert ".insn" encoding to instruction names
s390: assume stckf is always present
s390/nospec: move to single register thunks
s390: raise minimum supported machine generation to z10
s390/uaccess: Add copy_from/to_user_key functions
s390/nospec: align and size extern thunks
s390/nospec: add an option to use thunk-extern
s390/nospec: generate single register thunks if possible
s390/pci: make zpci_set_irq()/zpci_clear_irq() static
s390: remove unused expoline to BC instructions
s390/irq: use assignment instead of cast
s390/traps: get rid of magic cast for per code
s390/traps: get rid of magic cast for program interruption code
s390/signal: fix typo in comments
s390/asm-offsets: remove unused defines
s390/test_unwind: avoid build warning with W=1
s390: remove .fixup section
s390/bpf: encode register within extable entry
...
Merge more updates from Andrew Morton:
"Various misc subsystems, before getting into the post-linux-next
material.
41 patches.
Subsystems affected by this patch series: procfs, misc, core-kernel,
lib, checkpatch, init, pipe, minix, fat, cgroups, kexec, kdump,
taskstats, panic, kcov, resource, and ubsan"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (41 commits)
Revert "ubsan, kcsan: Don't combine sanitizer with kcov on clang"
kernel/resource: fix kfree() of bootmem memory again
kcov: properly handle subsequent mmap calls
kcov: split ioctl handling into locked and unlocked parts
panic: move panic_print before kmsg dumpers
panic: add option to dump all CPUs backtraces in panic_print
docs: sysctl/kernel: add missing bit to panic_print
taskstats: remove unneeded dead assignment
kasan: no need to unset panic_on_warn in end_report()
ubsan: no need to unset panic_on_warn in ubsan_epilogue()
panic: unset panic_on_warn inside panic()
docs: kdump: add scp example to write out the dump file
docs: kdump: update description about sysfs file system support
arm64: mm: use IS_ENABLED(CONFIG_KEXEC_CORE) instead of #ifdef
x86/setup: use IS_ENABLED(CONFIG_KEXEC_CORE) instead of #ifdef
riscv: mm: init: use IS_ENABLED(CONFIG_KEXEC_CORE) instead of #ifdef
kexec: make crashk_res, crashk_low_res and crash_notes symbols always visible
cgroup: use irqsave in cgroup_rstat_flush_locked().
fat: use pointer to simple type in put_user()
minix: fix bug when opening a file with O_DIRECT
...
Core
----
- Introduce XDP multi-buffer support, allowing the use of XDP with
jumbo frame MTUs and combination with Rx coalescing offloads (LRO).
- Speed up netns dismantling (5x) and lower the memory cost a little.
Remove unnecessary per-netns sockets. Scope some lists to a netns.
Cut down RCU syncing. Use batch methods. Allow netdev registration
to complete out of order.
- Support distinguishing timestamp types (ingress vs egress) and
maintaining them across packet scrubbing points (e.g. redirect).
- Continue the work of annotating packet drop reasons throughout
the stack.
- Switch netdev error counters from an atomic to dynamically
allocated per-CPU counters.
- Rework a few preempt_disable(), local_irq_save() and busy waiting
sections problematic on PREEMPT_RT.
- Extend the ref_tracker to allow catching use-after-free bugs.
BPF
---
- Introduce "packing allocator" for BPF JIT images. JITed code is
marked read only, and used to be allocated at page granularity.
Custom allocator allows for more efficient memory use, lower
iTLB pressure and prevents identity mapping huge pages from
getting split.
- Make use of BTF type annotations (e.g. __user, __percpu) to enforce
the correct probe read access method, add appropriate helpers.
- Convert the BPF preload to use light skeleton and drop
the user-mode-driver dependency.
- Allow XDP BPF_PROG_RUN test infra to send real packets, enabling
its use as a packet generator.
- Allow local storage memory to be allocated with GFP_KERNEL if called
from a hook allowed to sleep.
- Introduce fprobe (multi kprobe) to speed up mass attachment (arch
bits to come later).
- Add unstable conntrack lookup helpers for BPF by using the BPF
kfunc infra.
- Allow cgroup BPF progs to return custom errors to user space.
- Add support for AF_UNIX iterator batching.
- Allow iterator programs to use sleepable helpers.
- Support JIT of add, and, or, xor and xchg atomic ops on arm64.
- Add BTFGen support to bpftool which allows to use CO-RE in kernels
without BTF info.
- Large number of libbpf API improvements, cleanups and deprecations.
Protocols
---------
- Micro-optimize UDPv6 Tx, gaining up to 5% in test on dummy netdev.
- Adjust TSO packet sizes based on min_rtt, allowing very low latency
links (data centers) to always send full-sized TSO super-frames.
- Make IPv6 flow label changes (AKA hash rethink) more configurable,
via sysctl and setsockopt. Distinguish between server and client
behavior.
- VxLAN support to "collect metadata" devices to terminate only
configured VNIs. This is similar to VLAN filtering in the bridge.
- Support inserting IPv6 IOAM information to a fraction of frames.
- Add protocol attribute to IP addresses to allow identifying where
given address comes from (kernel-generated, DHCP etc.)
- Support setting socket and IPv6 options via cmsg on ping6 sockets.
- Reject mis-use of ECN bits in IP headers as part of DSCP/TOS.
Define dscp_t and stop taking ECN bits into account in fib-rules.
- Add support for locked bridge ports (for 802.1X).
- tun: support NAPI for packets received from batched XDP buffs,
doubling the performance in some scenarios.
- IPv6 extension header handling in Open vSwitch.
- Support IPv6 control message load balancing in bonding, prevent
neighbor solicitation and advertisement from using the wrong port.
Support NS/NA monitor selection similar to existing ARP monitor.
- SMC
- improve performance with TCP_CORK and sendfile()
- support auto-corking
- support TCP_NODELAY
- MCTP (Management Component Transport Protocol)
- add user space tag control interface
- I2C binding driver (as specified by DMTF DSP0237)
- Multi-BSSID beacon handling in AP mode for WiFi.
- Bluetooth:
- handle MSFT Monitor Device Event
- add MGMT Adv Monitor Device Found/Lost events
- Multi-Path TCP:
- add support for the SO_SNDTIMEO socket option
- lots of selftest cleanups and improvements
- Increase the max PDU size in CAN ISOTP to 64 kB.
Driver API
----------
- Add HW counters for SW netdevs, a mechanism for devices which
offload packet forwarding to report packet statistics back to
software interfaces such as tunnels.
- Select the default NIC queue count as a fraction of number of
physical CPU cores, instead of hard-coding to 8.
- Expose devlink instance locks to drivers. Allow device layer of
drivers to use that lock directly instead of creating their own
which always runs into ordering issues in devlink callbacks.
- Add header/data split indication to guide user space enabling
of TCP zero-copy Rx.
- Allow configuring completion queue event size.
- Refactor page_pool to enable fragmenting after allocation.
- Add allocation and page reuse statistics to page_pool.
- Improve Multiple Spanning Trees support in the bridge to allow
reuse of topologies across VLANs, saving HW resources in switches.
- DSA (Distributed Switch Architecture):
- replay and offload of host VLAN entries
- offload of static and local FDB entries on LAG interfaces
- FDB isolation and unicast filtering
New hardware / drivers
----------------------
- Ethernet:
- LAN937x T1 PHYs
- Davicom DM9051 SPI NIC driver
- Realtek RTL8367S, RTL8367RB-VB switch and MDIO
- Microchip ksz8563 switches
- Netronome NFP3800 SmartNICs
- Fungible SmartNICs
- MediaTek MT8195 switches
- WiFi:
- mt76: MediaTek mt7916
- mt76: MediaTek mt7921u USB adapters
- brcmfmac: Broadcom BCM43454/6
- Mobile:
- iosm: Intel M.2 7360 WWAN card
Drivers
-------
- Convert many drivers to the new phylink API built for split PCS
designs but also simplifying other cases.
- Intel Ethernet NICs:
- add TTY for GNSS module for E810T device
- improve AF_XDP performance
- GTP-C and GTP-U filter offload
- QinQ VLAN support
- Mellanox Ethernet NICs (mlx5):
- support xdp->data_meta
- multi-buffer XDP
- offload tc push_eth and pop_eth actions
- Netronome Ethernet NICs (nfp):
- flow-independent tc action hardware offload (police / meter)
- AF_XDP
- Other Ethernet NICs:
- at803x: fiber and SFP support
- xgmac: mdio: preamble suppression and custom MDC frequencies
- r8169: enable ASPM L1.2 if system vendor flags it as safe
- macb/gem: ZynqMP SGMII
- hns3: add TX push mode
- dpaa2-eth: software TSO
- lan743x: multi-queue, mdio, SGMII, PTP
- axienet: NAPI and GRO support
- Mellanox Ethernet switches (mlxsw):
- source and dest IP address rewrites
- RJ45 ports
- Marvell Ethernet switches (prestera):
- basic routing offload
- multi-chain TC ACL offload
- NXP embedded Ethernet switches (ocelot & felix):
- PTP over UDP with the ocelot-8021q DSA tagging protocol
- basic QoS classification on Felix DSA switch using dcbnl
- port mirroring for ocelot switches
- Microchip high-speed industrial Ethernet (sparx5):
- offloading of bridge port flooding flags
- PTP Hardware Clock
- Other embedded switches:
- lan966x: PTP Hardward Clock
- qca8k: mdio read/write operations via crafted Ethernet packets
- Qualcomm 802.11ax WiFi (ath11k):
- add LDPC FEC type and 802.11ax High Efficiency data in radiotap
- enable RX PPDU stats in monitor co-exist mode
- Intel WiFi (iwlwifi):
- UHB TAS enablement via BIOS
- band disablement via BIOS
- channel switch offload
- 32 Rx AMPDU sessions in newer devices
- MediaTek WiFi (mt76):
- background radar detection
- thermal management improvements on mt7915
- SAR support for more mt76 platforms
- MBSSID and 6 GHz band on mt7915
- RealTek WiFi:
- rtw89: AP mode
- rtw89: 160 MHz channels and 6 GHz band
- rtw89: hardware scan
- Bluetooth:
- mt7921s: wake on Bluetooth, SCO over I2S, wide-band-speed (WBS)
- Microchip CAN (mcp251xfd):
- multiple RX-FIFOs and runtime configurable RX/TX rings
- internal PLL, runtime PM handling simplification
- improve chip detection and error handling after wakeup
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=ELpe
-----END PGP SIGNATURE-----
Merge tag 'net-next-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"The sprinkling of SPI drivers is because we added a new one and Mark
sent us a SPI driver interface conversion pull request.
Core
----
- Introduce XDP multi-buffer support, allowing the use of XDP with
jumbo frame MTUs and combination with Rx coalescing offloads (LRO).
- Speed up netns dismantling (5x) and lower the memory cost a little.
Remove unnecessary per-netns sockets. Scope some lists to a netns.
Cut down RCU syncing. Use batch methods. Allow netdev registration
to complete out of order.
- Support distinguishing timestamp types (ingress vs egress) and
maintaining them across packet scrubbing points (e.g. redirect).
- Continue the work of annotating packet drop reasons throughout the
stack.
- Switch netdev error counters from an atomic to dynamically
allocated per-CPU counters.
- Rework a few preempt_disable(), local_irq_save() and busy waiting
sections problematic on PREEMPT_RT.
- Extend the ref_tracker to allow catching use-after-free bugs.
BPF
---
- Introduce "packing allocator" for BPF JIT images. JITed code is
marked read only, and used to be allocated at page granularity.
Custom allocator allows for more efficient memory use, lower iTLB
pressure and prevents identity mapping huge pages from getting
split.
- Make use of BTF type annotations (e.g. __user, __percpu) to enforce
the correct probe read access method, add appropriate helpers.
- Convert the BPF preload to use light skeleton and drop the
user-mode-driver dependency.
- Allow XDP BPF_PROG_RUN test infra to send real packets, enabling
its use as a packet generator.
- Allow local storage memory to be allocated with GFP_KERNEL if
called from a hook allowed to sleep.
- Introduce fprobe (multi kprobe) to speed up mass attachment (arch
bits to come later).
- Add unstable conntrack lookup helpers for BPF by using the BPF
kfunc infra.
- Allow cgroup BPF progs to return custom errors to user space.
- Add support for AF_UNIX iterator batching.
- Allow iterator programs to use sleepable helpers.
- Support JIT of add, and, or, xor and xchg atomic ops on arm64.
- Add BTFGen support to bpftool which allows to use CO-RE in kernels
without BTF info.
- Large number of libbpf API improvements, cleanups and deprecations.
Protocols
---------
- Micro-optimize UDPv6 Tx, gaining up to 5% in test on dummy netdev.
- Adjust TSO packet sizes based on min_rtt, allowing very low latency
links (data centers) to always send full-sized TSO super-frames.
- Make IPv6 flow label changes (AKA hash rethink) more configurable,
via sysctl and setsockopt. Distinguish between server and client
behavior.
- VxLAN support to "collect metadata" devices to terminate only
configured VNIs. This is similar to VLAN filtering in the bridge.
- Support inserting IPv6 IOAM information to a fraction of frames.
- Add protocol attribute to IP addresses to allow identifying where
given address comes from (kernel-generated, DHCP etc.)
- Support setting socket and IPv6 options via cmsg on ping6 sockets.
- Reject mis-use of ECN bits in IP headers as part of DSCP/TOS.
Define dscp_t and stop taking ECN bits into account in fib-rules.
- Add support for locked bridge ports (for 802.1X).
- tun: support NAPI for packets received from batched XDP buffs,
doubling the performance in some scenarios.
- IPv6 extension header handling in Open vSwitch.
- Support IPv6 control message load balancing in bonding, prevent
neighbor solicitation and advertisement from using the wrong port.
Support NS/NA monitor selection similar to existing ARP monitor.
- SMC
- improve performance with TCP_CORK and sendfile()
- support auto-corking
- support TCP_NODELAY
- MCTP (Management Component Transport Protocol)
- add user space tag control interface
- I2C binding driver (as specified by DMTF DSP0237)
- Multi-BSSID beacon handling in AP mode for WiFi.
- Bluetooth:
- handle MSFT Monitor Device Event
- add MGMT Adv Monitor Device Found/Lost events
- Multi-Path TCP:
- add support for the SO_SNDTIMEO socket option
- lots of selftest cleanups and improvements
- Increase the max PDU size in CAN ISOTP to 64 kB.
Driver API
----------
- Add HW counters for SW netdevs, a mechanism for devices which
offload packet forwarding to report packet statistics back to
software interfaces such as tunnels.
- Select the default NIC queue count as a fraction of number of
physical CPU cores, instead of hard-coding to 8.
- Expose devlink instance locks to drivers. Allow device layer of
drivers to use that lock directly instead of creating their own
which always runs into ordering issues in devlink callbacks.
- Add header/data split indication to guide user space enabling of
TCP zero-copy Rx.
- Allow configuring completion queue event size.
- Refactor page_pool to enable fragmenting after allocation.
- Add allocation and page reuse statistics to page_pool.
- Improve Multiple Spanning Trees support in the bridge to allow
reuse of topologies across VLANs, saving HW resources in switches.
- DSA (Distributed Switch Architecture):
- replay and offload of host VLAN entries
- offload of static and local FDB entries on LAG interfaces
- FDB isolation and unicast filtering
New hardware / drivers
----------------------
- Ethernet:
- LAN937x T1 PHYs
- Davicom DM9051 SPI NIC driver
- Realtek RTL8367S, RTL8367RB-VB switch and MDIO
- Microchip ksz8563 switches
- Netronome NFP3800 SmartNICs
- Fungible SmartNICs
- MediaTek MT8195 switches
- WiFi:
- mt76: MediaTek mt7916
- mt76: MediaTek mt7921u USB adapters
- brcmfmac: Broadcom BCM43454/6
- Mobile:
- iosm: Intel M.2 7360 WWAN card
Drivers
-------
- Convert many drivers to the new phylink API built for split PCS
designs but also simplifying other cases.
- Intel Ethernet NICs:
- add TTY for GNSS module for E810T device
- improve AF_XDP performance
- GTP-C and GTP-U filter offload
- QinQ VLAN support
- Mellanox Ethernet NICs (mlx5):
- support xdp->data_meta
- multi-buffer XDP
- offload tc push_eth and pop_eth actions
- Netronome Ethernet NICs (nfp):
- flow-independent tc action hardware offload (police / meter)
- AF_XDP
- Other Ethernet NICs:
- at803x: fiber and SFP support
- xgmac: mdio: preamble suppression and custom MDC frequencies
- r8169: enable ASPM L1.2 if system vendor flags it as safe
- macb/gem: ZynqMP SGMII
- hns3: add TX push mode
- dpaa2-eth: software TSO
- lan743x: multi-queue, mdio, SGMII, PTP
- axienet: NAPI and GRO support
- Mellanox Ethernet switches (mlxsw):
- source and dest IP address rewrites
- RJ45 ports
- Marvell Ethernet switches (prestera):
- basic routing offload
- multi-chain TC ACL offload
- NXP embedded Ethernet switches (ocelot & felix):
- PTP over UDP with the ocelot-8021q DSA tagging protocol
- basic QoS classification on Felix DSA switch using dcbnl
- port mirroring for ocelot switches
- Microchip high-speed industrial Ethernet (sparx5):
- offloading of bridge port flooding flags
- PTP Hardware Clock
- Other embedded switches:
- lan966x: PTP Hardward Clock
- qca8k: mdio read/write operations via crafted Ethernet packets
- Qualcomm 802.11ax WiFi (ath11k):
- add LDPC FEC type and 802.11ax High Efficiency data in radiotap
- enable RX PPDU stats in monitor co-exist mode
- Intel WiFi (iwlwifi):
- UHB TAS enablement via BIOS
- band disablement via BIOS
- channel switch offload
- 32 Rx AMPDU sessions in newer devices
- MediaTek WiFi (mt76):
- background radar detection
- thermal management improvements on mt7915
- SAR support for more mt76 platforms
- MBSSID and 6 GHz band on mt7915
- RealTek WiFi:
- rtw89: AP mode
- rtw89: 160 MHz channels and 6 GHz band
- rtw89: hardware scan
- Bluetooth:
- mt7921s: wake on Bluetooth, SCO over I2S, wide-band-speed (WBS)
- Microchip CAN (mcp251xfd):
- multiple RX-FIFOs and runtime configurable RX/TX rings
- internal PLL, runtime PM handling simplification
- improve chip detection and error handling after wakeup"
* tag 'net-next-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2521 commits)
llc: fix netdevice reference leaks in llc_ui_bind()
drivers: ethernet: cpsw: fix panic when interrupt coaleceing is set via ethtool
ice: don't allow to run ice_send_event_to_aux() in atomic ctx
ice: fix 'scheduling while atomic' on aux critical err interrupt
net/sched: fix incorrect vlan_push_eth dest field
net: bridge: mst: Restrict info size queries to bridge ports
net: marvell: prestera: add missing destroy_workqueue() in prestera_module_init()
drivers: net: xgene: Fix regression in CRC stripping
net: geneve: add missing netlink policy and size for IFLA_GENEVE_INNER_PROTO_INHERIT
net: dsa: fix missing host-filtered multicast addresses
net/mlx5e: Fix build warning, detected write beyond size of field
iwlwifi: mvm: Don't fail if PPAG isn't supported
selftests/bpf: Fix kprobe_multi test.
Revert "rethook: x86: Add rethook x86 implementation"
Revert "arm64: rethook: Add arm64 rethook implementation"
Revert "powerpc: Add rethook support"
Revert "ARM: rethook: Add rethook arm implementation"
netdevice: add missing dm_private kdoc
net: bridge: mst: prevent NULL deref in br_mst_info_size()
selftests: forwarding: Use same VRF for port and VLAN upper
...
Hi Linus,
Please, pull the following treewide patch that replaces zero-length arrays with
flexible-array members. This patch has been baking in linux-next for a
whole development cycle.
Thanks
--
Gustavo
-----BEGIN PGP SIGNATURE-----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=xZD2
-----END PGP SIGNATURE-----
Merge tag 'flexible-array-transformations-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux
Pull flexible-array transformations from Gustavo Silva:
"Treewide patch that replaces zero-length arrays with flexible-array
members.
This has been baking in linux-next for a whole development cycle"
* tag 'flexible-array-transformations-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux:
treewide: Replace zero-length arrays with flexible-array members
Commit 0ee3e7b889 ("checkpatch: get default codespell dictionary path
from package location") introduced the ability to search for the
codespell dictionary rather than hardcoding its path.
codespell requires Python 3.6 or above, but on some systems, the python
executable is a Python 2.7 interpreter. In this case, searching for the
dictionary fails, subsequently making codespell fail:
No codespell typos will be found - file '/usr/share/codespell/dictionary.txt': No such file or directory
So, use python3 to remove ambiguity.
In addition, when searching for dictionary.txt, do not check if the
codespell executable exists since,
- checkpatch.pl only uses dictionary.txt, not the codespell
executable.
- codespell can be installed via a Python package manager, in which
case the codespell executable may not be present in a typical $PATH,
but a dictionary does exist.
Link: https://lkml.kernel.org/r/20220309180048.147672-1-sagarmp@cs.unc.edu
Signed-off-by: Sagar Patel <sagarmp@cs.unc.edu>
Reviewed-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Cc: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add early_param as another exception to the blank line preferred after
function/struct/union declaration or definition test.
Link: https://lkml.kernel.org/r/3bd6ada59f411a7685d7e64eeb670540d4bfdcde.camel@perches.com
Signed-off-by: Joe Perches <joe@perches.com>
Cc: Dwaipayan Ray <dwaipayanray1@gmail.com>
Cc: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Single line code like:
if (foo) bar;
should generally be written:
if (foo)
bar;
Add a --fix test to do so.
This fix is not done when an ASSIGN_IN_IF in the same line exists.
Link: https://lkml.kernel.org/r/20220128185924.80137-2-joe@perches.com
Signed-off-by: Joe Perches <joe@perches.com>
Cc: Dwaipayan Ray <dwaipayanray1@gmail.com>
Cc: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
There is no effective difference.
Given the large number of uses of "GPL v2", emit this message only for
patches as a trivial treeside sed could be done one day.
Ref: commit bf7fbeeae6 ("module: Cure the MODULE_LICENSE "GPL" vs. "GPL v2" bogosity")
Link: https://lkml.kernel.org/r/20220128185924.80137-1-joe@perches.com
Signed-off-by: Joe Perches <joe@perches.com>
Cc: Dwaipayan Ray <dwaipayanray1@gmail.com>
Cc: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
There are three sets of updates for 5.18 in the asm-generic tree:
- The set_fs()/get_fs() infrastructure gets removed for good. This
was already gone from all major architectures, but now we can
finally remove it everywhere, which loses some particularly
tricky and error-prone code.
There is a small merge conflict against a parisc cleanup, the
solution is to use their new version.
- The nds32 architecture ends its tenure in the Linux kernel. The
hardware is still used and the code is in reasonable shape, but
the mainline port is not actively maintained any more, as all
remaining users are thought to run vendor kernels that would never
be updated to a future release.
There are some obvious conflicts against changes to the removed
files.
- A series from Masahiro Yamada cleans up some of the uapi header
files to pass the compile-time checks.
-----BEGIN PGP SIGNATURE-----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=vtCN
-----END PGP SIGNATURE-----
Merge tag 'asm-generic-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic
Pull asm-generic updates from Arnd Bergmann:
"There are three sets of updates for 5.18 in the asm-generic tree:
- The set_fs()/get_fs() infrastructure gets removed for good.
This was already gone from all major architectures, but now we can
finally remove it everywhere, which loses some particularly tricky
and error-prone code. There is a small merge conflict against a
parisc cleanup, the solution is to use their new version.
- The nds32 architecture ends its tenure in the Linux kernel.
The hardware is still used and the code is in reasonable shape, but
the mainline port is not actively maintained any more, as all
remaining users are thought to run vendor kernels that would never
be updated to a future release.
- A series from Masahiro Yamada cleans up some of the uapi header
files to pass the compile-time checks"
* tag 'asm-generic-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: (27 commits)
nds32: Remove the architecture
uaccess: remove CONFIG_SET_FS
ia64: remove CONFIG_SET_FS support
sh: remove CONFIG_SET_FS support
sparc64: remove CONFIG_SET_FS support
lib/test_lockup: fix kernel pointer check for separate address spaces
uaccess: generalize access_ok()
uaccess: fix type mismatch warnings from access_ok()
arm64: simplify access_ok()
m68k: fix access_ok for coldfire
MIPS: use simpler access_ok()
MIPS: Handle address errors for accesses above CPU max virtual user address
uaccess: add generic __{get,put}_kernel_nofault
nios2: drop access_ok() check from __put_user()
x86: use more conventional access_ok() definition
x86: remove __range_not_ok()
sparc64: add __{get,put}_kernel_nofault()
nds32: fix access_ok() checks in get/put_user
uaccess: fix nios2 and microblaze get_user_8()
sparc64: fix building assembly files
...
Some of the more common spelling mistakes and typos that I've found
while fixing up spelling mistakes in the kernel in the past four months.
Link: https://lkml.kernel.org/r/20220216152343.105546-1-colin.i.king@gmail.com
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Cc: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- Cleanups for SCHED_DEADLINE
- Tracing updates/fixes
- CPU Accounting fixes
- First wave of changes to optimize the overhead of the scheduler build,
from the fast-headers tree - including placeholder *_api.h headers for
later header split-ups.
- Preempt-dynamic using static_branch() for ARM64
- Isolation housekeeping mask rework; preperatory for further changes
- NUMA-balancing: deal with CPU-less nodes
- NUMA-balancing: tune systems that have multiple LLC cache domains per node (eg. AMD)
- Updates to RSEQ UAPI in preparation for glibc usage
- Lots of RSEQ/selftests, for same
- Add Suren as PSI co-maintainer
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=Z8uT
-----END PGP SIGNATURE-----
Merge tag 'sched-core-2022-03-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Ingo Molnar:
- Cleanups for SCHED_DEADLINE
- Tracing updates/fixes
- CPU Accounting fixes
- First wave of changes to optimize the overhead of the scheduler
build, from the fast-headers tree - including placeholder *_api.h
headers for later header split-ups.
- Preempt-dynamic using static_branch() for ARM64
- Isolation housekeeping mask rework; preperatory for further changes
- NUMA-balancing: deal with CPU-less nodes
- NUMA-balancing: tune systems that have multiple LLC cache domains per
node (eg. AMD)
- Updates to RSEQ UAPI in preparation for glibc usage
- Lots of RSEQ/selftests, for same
- Add Suren as PSI co-maintainer
* tag 'sched-core-2022-03-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (81 commits)
sched/headers: ARM needs asm/paravirt_api_clock.h too
sched/numa: Fix boot crash on arm64 systems
headers/prep: Fix header to build standalone: <linux/psi.h>
sched/headers: Only include <linux/entry-common.h> when CONFIG_GENERIC_ENTRY=y
cgroup: Fix suspicious rcu_dereference_check() usage warning
sched/preempt: Tell about PREEMPT_DYNAMIC on kernel headers
sched/topology: Remove redundant variable and fix incorrect type in build_sched_domains
sched/deadline,rt: Remove unused parameter from pick_next_[rt|dl]_entity()
sched/deadline,rt: Remove unused functions for !CONFIG_SMP
sched/deadline: Use __node_2_[pdl|dle]() and rb_first_cached() consistently
sched/deadline: Merge dl_task_can_attach() and dl_cpu_busy()
sched/deadline: Move bandwidth mgmt and reclaim functions into sched class source file
sched/deadline: Remove unused def_dl_bandwidth
sched/tracing: Report TASK_RTLOCK_WAIT tasks as TASK_UNINTERRUPTIBLE
sched/tracing: Don't re-read p->state when emitting sched_switch event
sched/rt: Plug rt_mutex_setprio() vs push_rt_task() race
sched/cpuacct: Remove redundant RCU read lock
sched/cpuacct: Optimize away RCU read lock
sched/cpuacct: Fix charge percpu cpuusage
sched/headers: Reorganize, clean up and optimize kernel/sched/sched.h dependencies
...
- bitops & cpumask:
- Always inline various generic helpers, to improve code generation,
but also for instrumentation, found by noinstr validation.
- Add a x86-specific cpumask_clear_cpu() helper to improve code generation
- atomics:
- Fix atomic64_{read_acquire,set_release} fallbacks
- lockdep:
- Fix /proc/lockdep output loop iteration for classes
- Fix /proc/lockdep potential access to invalid memory
- minor cleanups
- Add Mark Rutland as reviewer for atomic primitives
- jump labels:
- Clean up the code a bit
- misc:
- Add __sched annotations to percpu rwsem primitives
- Enable RT_MUTEXES on PREEMPT_RT by default
- Stray v8086_mode() inlining fix, result of noinstr objtool validation
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=04kk
-----END PGP SIGNATURE-----
Merge tag 'locking-core-2022-03-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking updates from Ingo Molnar:
"Changes in this cycle were:
Bitops & cpumask:
- Always inline various generic helpers, to improve code generation,
but also for instrumentation, found by noinstr validation.
- Add a x86-specific cpumask_clear_cpu() helper to improve code
generation
Atomics:
- Fix atomic64_{read_acquire,set_release} fallbacks
Lockdep:
- Fix /proc/lockdep output loop iteration for classes
- Fix /proc/lockdep potential access to invalid memory
- Add Mark Rutland as reviewer for atomic primitives
- Minor cleanups
Jump labels:
- Clean up the code a bit
Misc:
- Add __sched annotations to percpu rwsem primitives
- Enable RT_MUTEXES on PREEMPT_RT by default
- Stray v8086_mode() inlining fix, result of noinstr objtool
validation"
* tag 'locking-core-2022-03-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
jump_label: Refactor #ifdef of struct static_key
jump_label: Avoid unneeded casts in STATIC_KEY_INIT_{TRUE,FALSE}
locking/lockdep: Iterate lock_classes directly when reading lockdep files
x86/ptrace: Always inline v8086_mode() for instrumentation
cpumask: Add a x86-specific cpumask_clear_cpu() helper
locking: Enable RT_MUTEXES by default on PREEMPT_RT.
locking/local_lock: Make the empty local_lock_*() function a macro.
atomics: Fix atomic64_{read_acquire,set_release} fallbacks
locking: Add missing __sched attributes
cpumask: Always inline helpers which use bit manipulation functions
asm-generic/bitops: Always inline all bit manipulation helpers
locking/lockdep: Avoid potential access of invalid memory in lock_class
lockdep: Use memset_startat() helper in reinit_class()
MAINTAINERS: add myself as reviewer for atomics
- Convert overflow selftest to KUnit
- Convert stackinit selftest to KUnit
- Implement size_t saturating arithmetic helpers
- Allow struct_size() to be used in initializers
-----BEGIN PGP SIGNATURE-----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=eRcK
-----END PGP SIGNATURE-----
Merge tag 'overflow-v5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull overflow updates from Kees Cook:
"These changes come in roughly two halves: support of Gustavo A. R.
Silva's struct_size() work via additional helpers for catching
overflow allocation size calculations, and conversions of selftests to
KUnit (which includes some tweaks for UML + Clang):
- Convert overflow selftest to KUnit
- Convert stackinit selftest to KUnit
- Implement size_t saturating arithmetic helpers
- Allow struct_size() to be used in initializers"
* tag 'overflow-v5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
lib: stackinit: Convert to KUnit
um: Allow builds with Clang
lib: overflow: Convert to Kunit
overflow: Provide constant expression struct_size
overflow: Implement size_t saturating arithmetic helpers
test_overflow: Regularize test reporting output
highlights are:
- Numerous PDF-generation improvements
- Kees's new document with guidelines for researchers studying the
development community.
- The ongoing stream of Chinese translations
- Thorsten's new document on regression handling
- A major reworking of the internal documentation for the kernel-doc
script.
Plus the usual stream of typo fixes and such.
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEIw+MvkEiF49krdp9F0NaE2wMflgFAmI4puIPHGNvcmJldEBs
d24ubmV0AAoJEBdDWhNsDH5YUnoH/RubGxsXMBcpVk0szSN/c8VEhp+QxnL6Q8NV
BtOySou5lu204awb285m4HPvuVSViHKoDObFK3fYZUjCHP8rrSymnBV8N0E0pCYm
QAgUtNcGqFk41uEkr1v4wmGCj3hIvklycOtBAite4NulHoUzpMsssf6YbajZRIt9
/PyX30jC3dVPDCZ33lYIzJRdilhoKlS5r/x2Fk/c9uOLGCsJDufHlI6PB+RA7Gpf
6kDMriIKmEU9Pq2P+Gl+tVPnrQYSSxVP8QUweObQQll2Wq/tQR/1YtecAg0RvG+g
qc3ciEpVnNHRzSP1XY6Um1FyE338cBtZckdUMgVZ+5vY0300ooA=
=wRYm
-----END PGP SIGNATURE-----
Merge tag 'docs-5.18' of git://git.lwn.net/linux
Pull documentation updates from Jonathan Corbet:
"It has been a moderately busy cycle for documentation; some of the
highlights are:
- Numerous PDF-generation improvements
- Kees's new document with guidelines for researchers studying the
development community.
- The ongoing stream of Chinese translations
- Thorsten's new document on regression handling
- A major reworking of the internal documentation for the kernel-doc
script.
Plus the usual stream of typo fixes and such"
* tag 'docs-5.18' of git://git.lwn.net/linux: (80 commits)
docs/kernel-parameters: update description of mem=
docs/zh_CN: Add sched-nice-design Chinese translation
docs: scheduler: Convert schedutil.txt to ReST
Docs: ktap: add code-block type
docs: serial: fix a reference file name in driver.rst
docs: UML: Mention telnetd for port channel
docs/zh_CN: add damon reclaim translation
docs/zh_CN: add damon usage translation
docs/zh_CN: add admin-guide damon start translation
docs/zh_CN: add admin-guide damon index translation
docs/zh_CN: Refactoring the admin-guide directory index
zh_CN: Add translation for admin-guide/mm/index.rst
zh_CN: Add translations for admin-guide/mm/ksm.rst
Add Chinese translation for vm/ksm.rst
docs/zh_CN: Add sched-stats Chinese translation
docs/zh_CN: add devicetree of_unittest translation
docs/zh_CN: add devicetree usage-model translation
docs/zh_CN: add devicetree index translation
Documentation: describe how to apply incremental stable patches
docs/zh_CN: add peci subsystem translation
...
Objtool's --ibt option generates .ibt_endbr_seal which lists
superfluous ENDBR instructions. That is those instructions for which
the function is never indirectly called.
Overwrite these ENDBR instructions with a NOP4 such that these
function can never be indirect called, reducing the number of viable
ENDBR targets in the kernel.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lore.kernel.org/r/20220308154319.822545231@infradead.org
In order to prepare for LTO like objtool runs for modules, rename the
duplicate argument to lto.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lore.kernel.org/r/20220308154319.172584233@infradead.org
The kernel is moving from using `-std=gnu89` to `-std=gnu11`, permitting
the use of additional C11 features such as for-loop initial declarations.
One contentious aspect of C99 is that it permits mixed declarations and
code, and for now at least, it seems preferable to enforce that
declarations must come first.
These warnings were already enabled in the kernel itself, but not
for KBUILD_USERCFLAGS or the compat VDSO on arch/arm64, which uses
a separate set of CFLAGS.
This patch fixes an existing violation in modpost.c, which is not
reported because of the missing flag in KBUILD_USERCFLAGS:
| scripts/mod/modpost.c: In function ‘match’:
| scripts/mod/modpost.c:837:3: warning: ISO C90 forbids mixed declarations and code [-Wdeclaration-after-statement]
| 837 | const char *endp = p + strlen(p) - 1;
| | ^~~~~
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
[arnd: don't add a duplicate flag to the default set, update changelog]
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com> # LLVM/Clang v13.0.0 (x86-64)
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
As a preparation for moving to -std=gnu11, turn off the
-Wshift-negative-value option. This warning is enabled by gcc when
building with -Wextra for c99 or higher, but not for c89. Since
the kernel already relies on well-defined overflow behavior,
the warning is not helpful and can simply be disabled in
all locations that use -Wextra.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com> # LLVM/Clang v13.0.0 (x86-64)
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Switch the DT validation to use DTB files directly instead of a DTS to
YAML conversion.
The original motivation for supporting validation on DTB files was to
enable running validation on a running system (e.g. 'dt-validate
/sys/firmware/fdt') or other cases where the original source DTS is not
available.
The YAML format was not without issues. Using DTBs with the schema type
information solves some of those problems. The YAML format relies on the
DTS source level information including bracketing of properties, size
directives, and phandle tags all of which are lost in a DTB file. While
standardizing the bracketing is a good thing, it does cause a lot of
extra warnings and churn to fix them.
Another issue has been signed types are not validated correctly as sign
information is not propagated to YAML. Using the schema type information
allows for proper handling of signed types. YAML also can't represent
the full range of 64-bit integers as numbers are stored as floats by
most/all parsers.
The DTB validation works by decoding property values using the type
information in the schemas themselves. The main corner case this does
not work for is matrix types where neither dimension is fixed. For
now, checking the dimensions in these cases are skipped.
Signed-off-by: Rob Herring <robh@kernel.org>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20220310160513.1708182-3-robh@kernel.org
In preparation for supporting validation of DTB files, the full
processed schema will always be needed in order to extract type
information from it. Therefore, the processed schema containing only
what DT_SCHEMA_FILES specifies won't work. Instead, dt-validate has
gained an option, -l or --limit, to specify which schema(s) to use for
validation.
As the command line option is new, we the minimum dtschema version must be
updated.
Cc: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220310160513.1708182-2-robh@kernel.org
Displaying "PREEMPT" on kernel headers when CONFIG_PREEMPT_DYNAMIC=y
can be misleading for anybody involved in remote debugging because it
is then not guaranteed that there is an actual preemption behaviour. It
depends on default Kconfig or boot defined choices.
Therefore, tell about PREEMPT_DYNAMIC on static kernel headers and leave
the search for the actual preemption behaviour to browsing dmesg.
Reviewed-by: Valentin Schneider <valentin.schneider@arm.com>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20220217111240.GA742892@lothringen
Currently with -mindirect-branch=thunk and -mfunction-return=thunk compiler
options expoline thunks are put into individual COMDAT group sections. s390
is the only architecture which has group sections and it has implications
for kpatch and objtool tools support.
Using -mindirect-branch=thunk-extern and -mfunction-return=thunk-extern
is an alternative, which comes with a need to generate all required
expoline thunks manually. Unfortunately modules area is too far away from
the kernel image, and expolines from the kernel image cannon be used.
But since all new distributions (except Debian) build kernels for machine
generations newer than z10, where "exrl" instruction is available, that
leaves only 16 expolines thunks possible.
Provide an option to build the kernel with
-mindirect-branch=thunk-extern and -mfunction-return=thunk-extern for
z10 or newer. This also requires to postlink expoline thunks into all
modules explicitly. Currently modules already contain most expolines
anyhow.
Unfortunately -mindirect-branch=thunk-extern and
-mfunction-return=thunk-extern options support is broken in gcc <= 11.2.
Additional compile test is required to verify proper gcc support.
Acked-by: Ilya Leoshkevich <iii@linux.ibm.com>
Co-developed-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Signed-off-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Follow arm64, riscv, and x86 and change extable layout to common
"relative table with data". This allows to get rid of s390 specific
code in sorttable.c.
The main difference to before is that extable entries do not contain a
relative function pointer anymore. Instead data and type fields are
added.
The type field is used to indicate which exception handler needs to be
called, while the data field is currently unused.
Acked-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
The nds32 architecture, also known as AndeStar V3, is a custom 32-bit
RISC target designed by Andes Technologies. Support was added to the
kernel in 2016 as the replacement RISC-V based V5 processors were
already announced, and maintained by (current or former) Andes
employees.
As explained by Alan Kao, new customers are now all using RISC-V,
and all known nds32 users are already on longterm stable kernels
provided by Andes, with no development work going into mainline
support any more.
While the port is still in a reasonably good shape, it only gets
worse over time without active maintainers, so it seems best
to remove it before it becomes unusable. As always, if it turns
out that there are mainline users after all, and they volunteer
to maintain the port in the future, the removal can be reverted.
Link: https://lore.kernel.org/linux-mm/YhdWNLUhk+x9RAzU@yamatobi.andestech.com/
Link: https://lore.kernel.org/lkml/20220302065213.82702-1-alankao@andestech.com/
Link: https://www.andestech.com/en/products-solutions/andestar-architecture/
Signed-off-by: Alan Kao <alankao@andestech.com>
[arnd: rewrite changelog to provide more background]
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
If unittest detects a problem it will print a warning or error message
to the console. Unittest also triggers warning and error messages from
other kernel code as a result of intentionally bad unittest data. This
has led to confusion as to whether the triggered messages are an
expected result of a test or whether there is a real problem that is
independent of unittest.
EXPECT messages were added to unittest to report each triggered message
that is expected, resulting in verbose console output.
scripts/dtc/of_unittest is a new program that processes the EXPECT
messages to determine whether the triggered messages occurred and
also removes the excess verbosity of the EXPECT messages. More
information is available from 'scripts/dtc/of_unittest_expect --help'.
Signed-off-by: Frank Rowand <frank.rowand@sony.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220201181413.2719955-1-frowand.list@gmail.com
Currently, when there is no FILE argument following a switch such
as -man, -rst, or -none, kernel-doc exits with a warning from perl
(long msg folded):
Use of uninitialized value $ARGV[0] in pattern match (m//)
at ./scripts/kernel-doc line 438.
, which is unhelpful.
Improve the behavior by adding a check at the bottom of parsing
loop.
If the argument is absent, display help text and exit with
the code of 1 (via usage()).
Signed-off-by: Akira Yokosawa <akiyks@gmail.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/7b136049-a3ba-0eb5-8717-364d773ff914@gmail.com
[jc: reworked to fix conflict with pod patches]
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
I wanted to clean up these lines, but in the end decided not to touch
the old ones and just add my own about POD. I'll leave the cleanup
for lawyers.
Signed-off-by: Tomasz Warniełło <tomasz.warniello@gmail.com>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Disliked-by: Akira Yokosawa <akiyks@gmail.com>
Link: https://lore.kernel.org/r/20220218181628.1411551-12-tomasz.warniello@gmail.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
What for? To improve the script maintainability.
1. License
As stated by Jonathan Corbet in the reply to my version 1, the SPDX line
is enough.
2. The to-do list comment
As suggested by Jonathan Corbet in reply to my version 3, this section
doesn't need to be transitioned. And so it is removed for clarity.
3. The historical changelog comments
As suggested by Jonathan Corbet in a reply to v3, this section can go.
I wanted to keep it, but since it doesn't contain copyright notices,
let's just have it clean and simple.
4. The "format of comments" comment block
As suggested by Jani Nikula in a reply to my first version of this
transformation, Documentation/doc-guide/kernel-doc.rst can serve as the
information hub for comment formatting. The section DESCRIPTION already
points there, so the original comment block can just be removed.
Suggested-by: Jonathan Corbet <corbet@lwn.net>
Suggested-by: Jani Nikula <jani.nikula@linux.intel.com>
Signed-off-by: Tomasz Warniełło <tomasz.warniello@gmail.com>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Disliked-by: Akira Yokosawa <akiyks@gmail.com>
Link: https://lore.kernel.org/r/20220218181628.1411551-11-tomasz.warniello@gmail.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Aim: unified POD, user more satisfied, script better structured
You can see the results with:
$ scripts/kernel-doc -help
Signed-off-by: Tomasz Warniełło <tomasz.warniello@gmail.com>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Disliked-by: Akira Yokosawa <akiyks@gmail.com>
Link: https://lore.kernel.org/r/20220218181628.1411551-10-tomasz.warniello@gmail.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Aim: unified POD, user more satisfied, script better structured
Notes:
- The -help token is added.
- The entries are sorted alphbetically.
Signed-off-by: Tomasz Warniełło <tomasz.warniello@gmail.com>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Disliked-by: Akira Yokosawa <akiyks@gmail.com>
Link: https://lore.kernel.org/r/20220218181628.1411551-9-tomasz.warniello@gmail.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Aim: unified POD, user more satisfied, script better structured
A subsection "reStructuredText only" is added for -enable-lineno.
Other notes:
- paragraphing correction
Signed-off-by: Tomasz Warniełło <tomasz.warniello@gmail.com>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Disliked-by: Akira Yokosawa <akiyks@gmail.com>
Link: https://lore.kernel.org/r/20220218181628.1411551-8-tomasz.warniello@gmail.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Aim: unified POD, user more satisfied, script better structured
The plurals in -function and -nosymbol are corrected to singulars.
That's how the script works now. I think this describes the syntax better.
The plurar suggests multiple FILE arguments might be possible. So this
seems more coherent.
Other notes:
- paragraphing correction
- article correction
Signed-off-by: Tomasz Warniełło <tomasz.warniello@gmail.com>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Disliked-by: Akira Yokosawa <akiyks@gmail.com>
Link: https://lore.kernel.org/r/20220218181628.1411551-7-tomasz.warniello@gmail.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Aim: unified POD, user more happy
This section is renamed to "Output format modifiers" to make it simple.
To make it even more simple, a subsection is added:
"reStructuredText only".
Other notes:
- paragraphing correction
- article correction
Signed-off-by: Tomasz Warniełło <tomasz.warniello@gmail.com>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Disliked-by: Akira Yokosawa <akiyks@gmail.com>
Link: https://lore.kernel.org/r/20220218181628.1411551-6-tomasz.warniello@gmail.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Another step in the direction of a uniform POD documentation, which will
make users happier.
Options land at the end of the script, not to clutter the file top.
The default output format is corrected to rst. That's what it is now.
A POD delimiting comment is added to the script head, which improves
the script logical structure.
Signed-off-by: Tomasz Warniełło <tomasz.warniello@gmail.com>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Disliked-by: Akira Yokosawa <akiyks@gmail.com>
Link: https://lore.kernel.org/r/20220218181628.1411551-5-tomasz.warniello@gmail.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Transition the description section into POD. This is one of the standard
documentation sections. This adjustment makes the section available for
POD and makes it look better.
Notes:
- an article addition
- paragraphing correction
Signed-off-by: Tomasz Warniełło <tomasz.warniello@gmail.com>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Disliked-by: Akira Yokosawa <akiyks@gmail.com>
Link: https://lore.kernel.org/r/20220218181628.1411551-4-tomasz.warniello@gmail.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
The former usage function is substituted, although not as the -h and -help
parameter handler yet.
Purpose: Use Pod::Usage to handle documentation printing in an integrated
way.
Signed-off-by: Tomasz Warniełło <tomasz.warniello@gmail.com>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Disliked-by: Akira Yokosawa <akiyks@gmail.com>
Link: https://lore.kernel.org/r/20220218181628.1411551-3-tomasz.warniello@gmail.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
The NAME section provides the doc title, while SYNOPSIS contains
the basic syntax and usage description, which will be printed
in the help document and in the error output produced on wrong script
usage.
The rationale is to give users simple and succinct enlightment,
at the same time structuring the script internally for the maintainers.
In the synopsis, Rst-only options are grouped around rst, and the rest is
arranged as in the OPTIONS subsections (yet to be translated into POD,
check at the end of the series).
The third of the basic sections, DESCRIPTION, is added separately.
Signed-off-by: Tomasz Warniełło <tomasz.warniello@gmail.com>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Disliked-by: Akira Yokosawa <akiyks@gmail.com>
Link: https://lore.kernel.org/r/20220218181628.1411551-2-tomasz.warniello@gmail.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
The llvm compiler can generate lots of local labels ('.LBB', '.Ltmpxxx',
'.L__unnamed_xx', etc.). These symbols usually are useless for debugging.
And they might overlap with handwritten symbols.
Before this change, a dumpstack shows a local symbol for epc:
[ 0.040341][ T0] Hardware name: riscv-virtio,qemu (DT)
[ 0.040376][ T0] epc : .LBB6_14+0x22/0x6a
[ 0.040452][ T0] ra : restore_all+0x12/0x6e
The simple solution is that we can ignore all local labels prefixed by '.L'.
For handwritten symbols which need to be preserved should drop the '.L'
prefix.
After this change, the C defined symbol is shown so we can locate the
problematical code immediately:
[ 0.035795][ T0] Hardware name: riscv-virtio,qemu (DT)
[ 0.036332][ T0] epc : trace_hardirqs_on+0x54/0x13c
[ 0.036567][ T0] ra : restore_all+0x12/0x6e
Signed-off-by: Changbin Du <changbin.du@gmail.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Currently, "# end of ..." is inserted when the menu goes back to its
parent.
Hence, an empty menu:
menu "Foo"
endmenu
... ends up with unbalanced menu comments, like this:
#
# Foo
#
Let's close the menu comments properly:
#
# Foo
#
# end of Foo
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
As David Laight pointed out, there is not much point in calling
ferror() unless you call fflush() first.
Reported-by: David Laight <David.Laight@ACULAB.COM>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
There is a regular need in the kernel to provide a way to declare
having a dynamically sized set of trailing elements in a structure.
Kernel code should always use “flexible array members”[1] for these
cases. The older style of one-element or zero-length arrays should
no longer be used[2].
This code was transformed with the help of Coccinelle:
(next-20220214$ spatch --jobs $(getconf _NPROCESSORS_ONLN) --sp-file script.cocci --include-headers --dir . > output.patch)
@@
identifier S, member, array;
type T1, T2;
@@
struct S {
...
T1 member;
T2 array[
- 0
];
};
UAPI and wireless changes were intentionally excluded from this patch
and will be sent out separately.
[1] https://en.wikipedia.org/wiki/Flexible_array_member
[2] https://www.kernel.org/doc/html/v5.16/process/deprecated.html#zero-length-and-one-element-arrays
Link: https://github.com/KSPP/linux/issues/78
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
$(or ...) is available since GNU Make 3.81, and useful to shorten the
code in some places.
Covert as follows:
$(if A,A,B) --> $(or A,B)
This patch also converts:
$(if A, A, B) --> $(or A, B)
Strictly speaking, the latter is not an equivalent conversion because
GNU Make keeps spaces after commas; if A is not empty, $(if A, A, B)
expands to " A", while $(or A, B) expands to "A".
Anyway, preceding spaces are not significant in the code hunks I touched.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
cmd_copy and cmd_shipped have similar functionality. The difference is
that cmd_copy uses 'cp' while cmd_shipped 'cat'.
Unify them into cmd_copy because this macro name is more intuitive.
Going forward, cmd_copy will use 'cat' to avoid the permission issue.
I also thought of 'cp --no-preserve=mode' but this option is not
mentioned in the POSIX spec [1], so I am keeping the 'cat' command.
[1]: https://pubs.opengroup.org/onlinepubs/009695299/utilities/cp.html
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Gabriel Krisman Bertazi <krisman@collabora.com>
When the KCONFIG_AUTOCONFIG is specified (e.g. export \
KCONFIG_AUTOCONFIG=output/config/auto.conf), the directory of
include/config/ will not be created, so kconfig can't create deps
files in it and auto.conf can't be generated.
Signed-off-by: Jing Leng <jleng@ambarella.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Arnd reports that on 32-bit architectures, the fallbacks for
atomic64_read_acquire() and atomic64_set_release() are broken as they
use smp_load_acquire() and smp_store_release() respectively, which do
not work on types larger than the native word size.
Since those contain compiletime_assert_atomic_type(), any attempt to use
those fallbacks will result in a build-time error. e.g. with the
following added to arch/arm/kernel/setup.c:
| void test_atomic64(atomic64_t *v)
| {
| atomic64_set_release(v, 5);
| atomic64_read_acquire(v);
| }
The compiler will complain as follows:
| In file included from <command-line>:
| In function 'arch_atomic64_set_release',
| inlined from 'test_atomic64' at ./include/linux/atomic/atomic-instrumented.h:669:2:
| ././include/linux/compiler_types.h:346:38: error: call to '__compiletime_assert_9' declared with attribute error: Need native word sized stores/loads for atomicity.
| 346 | _compiletime_assert(condition, msg, __compiletime_assert_, __COUNTER__)
| | ^
| ././include/linux/compiler_types.h:327:4: note: in definition of macro '__compiletime_assert'
| 327 | prefix ## suffix(); \
| | ^~~~~~
| ././include/linux/compiler_types.h:346:2: note: in expansion of macro '_compiletime_assert'
| 346 | _compiletime_assert(condition, msg, __compiletime_assert_, __COUNTER__)
| | ^~~~~~~~~~~~~~~~~~~
| ././include/linux/compiler_types.h:349:2: note: in expansion of macro 'compiletime_assert'
| 349 | compiletime_assert(__native_word(t), \
| | ^~~~~~~~~~~~~~~~~~
| ./include/asm-generic/barrier.h:133:2: note: in expansion of macro 'compiletime_assert_atomic_type'
| 133 | compiletime_assert_atomic_type(*p); \
| | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
| ./include/asm-generic/barrier.h:164:55: note: in expansion of macro '__smp_store_release'
| 164 | #define smp_store_release(p, v) do { kcsan_release(); __smp_store_release(p, v); } while (0)
| | ^~~~~~~~~~~~~~~~~~~
| ./include/linux/atomic/atomic-arch-fallback.h:1270:2: note: in expansion of macro 'smp_store_release'
| 1270 | smp_store_release(&(v)->counter, i);
| | ^~~~~~~~~~~~~~~~~
| make[2]: *** [scripts/Makefile.build:288: arch/arm/kernel/setup.o] Error 1
| make[1]: *** [scripts/Makefile.build:550: arch/arm/kernel] Error 2
| make: *** [Makefile:1831: arch/arm] Error 2
Fix this by only using smp_load_acquire() and smp_store_release() for
native atomic types, and otherwise falling back to the regular barriers
necessary for acquire/release semantics, as we do in the more generic
acquire and release fallbacks.
Since the fallback templates are used to generate the atomic64_*() and
atomic_*() operations, the __native_word() check is added to both. For
the atomic_*() operations, which are always 32-bit, the __native_word()
check is redundant but not harmful, as it is always true.
For the example above this works as expected on 32-bit, e.g. for arm
multi_v7_defconfig:
| <test_atomic64>:
| push {r4, r5}
| dmb ish
| pldw [r0]
| mov r2, #5
| mov r3, #0
| ldrexd r4, [r0]
| strexd r4, r2, [r0]
| teq r4, #0
| bne 484 <test_atomic64+0x14>
| ldrexd r2, [r0]
| dmb ish
| pop {r4, r5}
| bx lr
... and also on 64-bit, e.g. for arm64 defconfig:
| <test_atomic64>:
| bti c
| paciasp
| mov x1, #0x5
| stlr x1, [x0]
| ldar x0, [x0]
| autiasp
| ret
Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Boqun Feng <boqun.feng@gmail.com>
Link: https://lore.kernel.org/r/20220207101943.439825-1-mark.rutland@arm.com
Daniel Borkmann says:
====================
pull-request: bpf-next 2022-02-09
We've added 126 non-merge commits during the last 16 day(s) which contain
a total of 201 files changed, 4049 insertions(+), 2215 deletions(-).
The main changes are:
1) Add custom BPF allocator for JITs that pack multiple programs into a huge
page to reduce iTLB pressure, from Song Liu.
2) Add __user tagging support in vmlinux BTF and utilize it from BPF
verifier when generating loads, from Yonghong Song.
3) Add per-socket fast path check guarding from cgroup/BPF overhead when
used by only some sockets, from Pavel Begunkov.
4) Continued libbpf deprecation work of APIs/features and removal of their
usage from samples, selftests, libbpf & bpftool, from Andrii Nakryiko
and various others.
5) Improve BPF instruction set documentation by adding byte swap
instructions and cleaning up load/store section, from Christoph Hellwig.
6) Switch BPF preload infra to light skeleton and remove libbpf dependency
from it, from Alexei Starovoitov.
7) Fix architecture-agnostic macros in libbpf for accessing syscall
arguments from BPF progs for non-x86 architectures,
from Ilya Leoshkevich.
8) Rework port members in struct bpf_sk_lookup and struct bpf_sock to be
of 16-bit field with anonymous zero padding, from Jakub Sitnicki.
9) Add new bpf_copy_from_user_task() helper to read memory from a different
task than current. Add ability to create sleepable BPF iterator progs,
from Kenny Yu.
10) Implement XSK batching for ice's zero-copy driver used by AF_XDP and
utilize TX batching API from XSK buffer pool, from Maciej Fijalkowski.
11) Generate temporary netns names for BPF selftests to avoid naming
collisions, from Hangbin Liu.
12) Implement bpf_core_types_are_compat() with limited recursion for
in-kernel usage, from Matteo Croce.
13) Simplify pahole version detection and finally enable CONFIG_DEBUG_INFO_DWARF5
to be selected with CONFIG_DEBUG_INFO_BTF, from Nathan Chancellor.
14) Misc minor fixes to libbpf and selftests from various folks.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (126 commits)
selftests/bpf: Cover 4-byte load from remote_port in bpf_sk_lookup
bpf: Make remote_port field in struct bpf_sk_lookup 16-bit wide
libbpf: Fix compilation warning due to mismatched printf format
selftests/bpf: Test BPF_KPROBE_SYSCALL macro
libbpf: Add BPF_KPROBE_SYSCALL macro
libbpf: Fix accessing the first syscall argument on s390
libbpf: Fix accessing the first syscall argument on arm64
libbpf: Allow overriding PT_REGS_PARM1{_CORE}_SYSCALL
selftests/bpf: Skip test_bpf_syscall_macro's syscall_arg1 on arm64 and s390
libbpf: Fix accessing syscall arguments on riscv
libbpf: Fix riscv register names
libbpf: Fix accessing syscall arguments on powerpc
selftests/bpf: Use PT_REGS_SYSCALL_REGS in bpf_syscall_macro
libbpf: Add PT_REGS_SYSCALL_REGS macro
selftests/bpf: Fix an endianness issue in bpf_syscall_macro test
bpf: Fix bpf_prog_pack build HPAGE_PMD_SIZE
bpf: Fix leftover header->pages in sparc and powerpc code.
libbpf: Fix signedness bug in btf_dump_array_data()
selftests/bpf: Do not export subtest as standalone test
bpf, x86_64: Fail gracefully on bpf_jit_binary_pack_finalize failures
...
====================
Link: https://lore.kernel.org/r/20220209210050.8425-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The file is not closed when ferror() fails.
Fixes: 00d674cb35 ("kconfig: refactor conf_write_dep()")
Fixes: 57ddd07c45 ("kconfig: refactor conf_write_autoconf()")
Reported-by: Ryan Cai <ycaibb@gmail.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
-Wunaligned-access is a new warning in clang that is default enabled for
arm and arm64 under certain circumstances within the clang frontend (see
LLVM commit below). On v5.17-rc2, an ARCH=arm allmodconfig build shows
1284 total/70 unique instances of this warning (most of the instances
are in header files), which is quite noisy.
To keep a normal build green through CONFIG_WERROR, only show this
warning with W=1, which will allow automated build systems to catch new
instances of the warning so that the total number can be driven down to
zero eventually since catching unaligned accesses at compile time would
be generally useful.
Cc: stable@vger.kernel.org
Link: 35737df4dc
Link: https://github.com/ClangBuiltLinux/linux/issues/1569
Link: https://github.com/ClangBuiltLinux/linux/issues/1576
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
The 'shell' built-in only returns the first 256 bytes of the command's
output. In some cases, 'shell' is used to return a path; by bumping up
the buffer size to 4096 this lets us capture up to PATH_MAX.
The specific case where I ran into this was due to commit 1e860048c5
("gcc-plugins: simplify GCC plugin-dev capability test"). After this
change, we now use `$(shell,$(CC) -print-file-name=plugin)` to return
a path; if the gcc path is particularly long, then the path ends up
truncated at the 256 byte mark, which makes the HAVE_GCC_PLUGINS
depends test always fail.
Signed-off-by: Brenda Streiff <brenda.streiff@ni.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
The .noinstr.text section functions may not have "current()" sanely
available. Similarly true for .entry.text, though such a check is
currently redundant. Add a check for both. In an x86_64 defconfig build,
the following functions no longer receive stackleak instrumentation:
__do_fast_syscall_32()
do_int80_syscall_32()
do_machine_check()
do_syscall_64()
exc_general_protection()
fixup_bad_iret()
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Cc: Alexander Popov <alex.popov@linux.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Since STRING_CST may not be NUL terminated, strncmp() was used for check
for equality. However, this may lead to mismatches for longer section
names where the start matches the tested-for string. Test for exact
equality by checking for the presences of NUL termination.
Cc: Alexander Popov <alex.popov@linux.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
In order to compare instrumentation between builds, make the verbose
mode of the plugin available during the build. This is rarely needed
(behind EXPERT) and very noisy (disabled for COMPILE_TEST).
Cc: Alexander Popov <alex.popov@linux.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Running with POSIXLY_CORRECT=1 in the environment the scripts/dtc build
fails, because pkg-config doesn't output anything when the flags come
after the arguments.
Fixes: 067c650c45 ("dtc: Use pkg-config to locate libyaml")
Signed-off-by: Thomas Bracht Laumann Jespersen <t@laumann.xyz>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220131112028.7907-1-t@laumann.xyz
get_abi.pl currently collects every file in Documentation/ABI. This
causes a UnicodeDecodeError in Documentation/sphinx/kernel_abi.py,
when it finds my Vim swap files (.foo.swp) in the directory.
To avoid such issues, ignore hidden files in get_abi.pl.
Reviewed-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Link: https://lore.kernel.org/r/20220129005019.2090996-1-j.neuschaefer@gmx.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
remove unused variable "col", otherwise there will be a type error
as below:
typeerror: not all arguments converted during string formatting
Signed-off-by: Ding Xiang <dingxiang@cmss.chinamobile.com>
Link: https://lore.kernel.org/r/20220114024058.74536-1-dingxiang@cmss.chinamobile.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use pahole-version.sh to get pahole's version code to reduce the amount
of duplication across the tree.
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220201205624.652313-4-nathan@kernel.org
There are a few different places where pahole's version is turned into a
three digit form with the exact same command. Move this command into
scripts/pahole-version.sh to reduce the amount of duplication across the
tree.
Create CONFIG_PAHOLE_VERSION so the version code can be used in Kconfig
to enable and disable configuration options based on the pahole version,
which is already done in a couple of places.
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220201205624.652313-3-nathan@kernel.org
First S390 complained that the sorting of the mcount sections at build
time caused the kernel to crash on their architecture. Now PowerPC is
complaining about it too. And also ARM64 appears to be having issues.
It may be necessary to also update the relocation table for the values
in the mcount table. Not only do we have to sort the table, but also
update the relocations that may be applied to the items in the table.
If the system is not relocatable, then it is fine to sort, but if it is,
some architectures may have issues (although x86 does not as it shifts all
addresses the same).
Add a HAVE_BUILDTIME_MCOUNT_SORT that an architecture can set to say it is
safe to do the sorting at build time.
Also update the config to compile in build time sorting in the sorttable
code in scripts/ to depend on CONFIG_BUILDTIME_MCOUNT_SORT.
Link: https://lore.kernel.org/all/944D10DA-8200-4BA9-8D0A-3BED9AA99F82@linux.ibm.com/
Link: https://lkml.kernel.org/r/20220127153821.3bc1ac6e@gandalf.local.home
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Yinan Liu <yinan@linux.alibaba.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Reported-by: Sachin Sant <sachinp@linux.ibm.com>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: Mark Rutland <mark.rutland@arm.com> [arm64]
Tested-by: Sachin Sant <sachinp@linux.ibm.com>
Fixes: 72b3942a17 ("scripts: ftrace - move the sort-processing in ftrace_init")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Daniel Borkmann says:
====================
pull-request: bpf-next 2022-01-24
We've added 80 non-merge commits during the last 14 day(s) which contain
a total of 128 files changed, 4990 insertions(+), 895 deletions(-).
The main changes are:
1) Add XDP multi-buffer support and implement it for the mvneta driver,
from Lorenzo Bianconi, Eelco Chaudron and Toke Høiland-Jørgensen.
2) Add unstable conntrack lookup helpers for BPF by using the BPF kfunc
infra, from Kumar Kartikeya Dwivedi.
3) Extend BPF cgroup programs to export custom ret value to userspace via
two helpers bpf_get_retval() and bpf_set_retval(), from YiFei Zhu.
4) Add support for AF_UNIX iterator batching, from Kuniyuki Iwashima.
5) Complete missing UAPI BPF helper description and change bpf_doc.py script
to enforce consistent & complete helper documentation, from Usama Arif.
6) Deprecate libbpf's legacy BPF map definitions and streamline XDP APIs to
follow tc-based APIs, from Andrii Nakryiko.
7) Support BPF_PROG_QUERY for BPF programs attached to sockmap, from Di Zhu.
8) Deprecate libbpf's bpf_map__def() API and replace users with proper getters
and setters, from Christy Lee.
9) Extend libbpf's btf__add_btf() with an additional hashmap for strings to
reduce overhead, from Kui-Feng Lee.
10) Fix bpftool and libbpf error handling related to libbpf's hashmap__new()
utility function, from Mauricio Vásquez.
11) Add support to BTF program names in bpftool's program dump, from Raman Shukhau.
12) Fix resolve_btfids build to pick up host flags, from Connor O'Brien.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (80 commits)
selftests, bpf: Do not yet switch to new libbpf XDP APIs
selftests, xsk: Fix rx_full stats test
bpf: Fix flexible_array.cocci warnings
xdp: disable XDP_REDIRECT for xdp frags
bpf: selftests: add CPUMAP/DEVMAP selftests for xdp frags
bpf: selftests: introduce bpf_xdp_{load,store}_bytes selftest
net: xdp: introduce bpf_xdp_pointer utility routine
bpf: generalise tail call map compatibility check
libbpf: Add SEC name for xdp frags programs
bpf: selftests: update xdp_adjust_tail selftest to include xdp frags
bpf: test_run: add xdp_shared_info pointer in bpf_test_finish signature
bpf: introduce frags support to bpf_prog_test_run_xdp()
bpf: move user_size out of bpf_test_init
bpf: add frags support to xdp copy helpers
bpf: add frags support to the bpf_xdp_adjust_tail() API
bpf: introduce bpf_xdp_get_buff_len helper
net: mvneta: enable jumbo frames if the loaded XDP program support frags
bpf: introduce BPF_F_XDP_HAS_FRAGS flag in prog_flags loading the ebpf program
net: mvneta: add frags support to XDP_TX
xdp: add frags support to xdp_return_{buff/frame}
...
====================
Link: https://lore.kernel.org/r/20220124221235.18993-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- Fix a regression when probing a child device reusing the parent
device's DT node pointer
- Refactor of_parse_phandle*() variants to static inlines
- Drop Enric Balletbo i Serra as a maintainer
- Fix DT schemas with arrays incorrectly encoded as a matrix
- Drop unneeded pinctrl properties from schemas
- Add SPI peripheral schema to SPI based displays
- Clean-up several schema examples
- Clean-up trivial-devices.yaml comments
- Add missing, in use vendor prefixes: Wingtech, Thundercomm, Huawei,
F(x)tec, 8devices
-----BEGIN PGP SIGNATURE-----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=ZOqM
-----END PGP SIGNATURE-----
Merge tag 'devicetree-fixes-for-5.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree fixes and cleanups from Rob Herring:
- Fix a regression when probing a child device reusing the parent
device's DT node pointer
- Refactor of_parse_phandle*() variants to static inlines
- Drop Enric Balletbo i Serra as a maintainer
- Fix DT schemas with arrays incorrectly encoded as a matrix
- Drop unneeded pinctrl properties from schemas
- Add SPI peripheral schema to SPI based displays
- Clean-up several schema examples
- Clean-up trivial-devices.yaml comments
- Add missing, in use vendor prefixes: Wingtech, Thundercomm, Huawei,
F(x)tec, 8devices
* tag 'devicetree-fixes-for-5.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
dt-bindings: google,cros-ec: drop Enric Balletbo i Serra from maintainers
dt-bindings: display: bridge: drop Enric Balletbo i Serra from maintainers
of: Check 'of_node_reused' flag on of_match_device()
of: property: define of_property_read_u{8,16,32,64}_array() unconditionally
of: base: make small of_parse_phandle() variants static inline
dt-bindings: mfd: cirrus,madera: Fix 'interrupts' in example
dt-bindings: Fix array schemas encoded as matrices
dt-bindings: Drop unnecessary pinctrl properties
dt-bindings: rtc: st,stm32-rtc: Make each example a separate entry
dt-bindings: mmc: arm,pl18x: Make each example a separate entry
dt-bindings: display: Add SPI peripheral schema to SPI based displays
scripts/dtc: dtx_diff: remove broken example from help text
dt-bindings: trivial-devices: fix double spaces in comments
dt-bindings: trivial-devices: fix swapped comments
dt-bindings: vendor-prefixes: add Wingtech
dt-bindings: vendor-prefixes: add Thundercomm
dt-bindings: vendor-prefixes: add Huawei
dt-bindings: vendor-prefixes: add F(x)tec
dt-bindings: vendor-prefixes: add 8devices
dt-bindings: power: reset: gpio-restart: Correct default priority
Merge more updates from Andrew Morton:
"55 patches.
Subsystems affected by this patch series: percpu, procfs, sysctl,
misc, core-kernel, get_maintainer, lib, checkpatch, binfmt, nilfs2,
hfs, fat, adfs, panic, delayacct, kconfig, kcov, and ubsan"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (55 commits)
lib: remove redundant assignment to variable ret
ubsan: remove CONFIG_UBSAN_OBJECT_SIZE
kcov: fix generic Kconfig dependencies if ARCH_WANTS_NO_INSTR
lib/Kconfig.debug: make TEST_KMOD depend on PAGE_SIZE_LESS_THAN_256KB
btrfs: use generic Kconfig option for 256kB page size limit
arch/Kconfig: split PAGE_SIZE_LESS_THAN_256KB from PAGE_SIZE_LESS_THAN_64KB
configs: introduce debug.config for CI-like setup
delayacct: track delays from memory compact
Documentation/accounting/delay-accounting.rst: add thrashing page cache and direct compact
delayacct: cleanup flags in struct task_delay_info and functions use it
delayacct: fix incomplete disable operation when switch enable to disable
delayacct: support swapin delay accounting for swapping without blkio
panic: remove oops_id
panic: use error_report_end tracepoint on warnings
fs/adfs: remove unneeded variable make code cleaner
FAT: use io_schedule_timeout() instead of congestion_wait()
hfsplus: use struct_group_attr() for memcpy() region
nilfs2: remove redundant pointer sbufs
fs/binfmt_elf: use PT_LOAD p_align values for static PIE
const_structs.checkpatch: add frequently used ops structs
...
The object-size sanitizer is redundant to -Warray-bounds, and
inappropriately performs its checks at run-time when all information
needed for the evaluation is available at compile-time, making it quite
difficult to use:
https://bugzilla.kernel.org/show_bug.cgi?id=214861
With -Warray-bounds almost enabled globally, it doesn't make sense to
keep this around.
Link: https://lkml.kernel.org/r/20211203235346.110809-1-keescook@chromium.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Marco Elver <elver@google.com>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Michal Marek <michal.lkml@markovi.net>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: "Peter Zijlstra (Intel)" <peterz@infradead.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add commonly used structs (>50 instances) which are always or almost
always const.
Link: https://lkml.kernel.org/r/20211127101134.33101-1-rikard.falkeborn@gmail.com
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Cc: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The Kconfig help test erroneously counts patch context lines as part of
the help text.
Fix that and improve the message block output.
Link: https://lkml.kernel.org/r/06c0cdc157ae1502e8e9eb3624b9ea995cf11e7a.camel@perches.com
Signed-off-by: Joe Perches <joe@perches.com>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Andy Whitcroft <apw@canonical.com>
Cc: Dwaipayan Ray <dwaipayanray1@gmail.com>
Cc: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
One exceptions to the COMMIT_LOG_LONG_LINE rule is a file path followed
by ':'. That is typically some sort diagnostic message from a compiler
or a build tool, in which case we don't want to wrap the lines but keep
the message unmodified.
The regular expression used to match this pattern currently doesn't
accept absolute paths or + characters. This can result in false
positives as in the following (out-of-tree) example:
...
/home/jerome/work/optee_repo_qemu/build/../toolchains/aarch32/bin/arm-linux-gnueabihf-ld.bfd: /home/jerome/work/toolchains-gcc10.2/aarch32/bin/../lib/gcc/arm-none-linux-gnueabihf/10.2.1/../../../../arm-none-linux-gnueabihf/lib/libstdc++.a(eh_alloc.o): in function `__cxa_allocate_exception':
/tmp/dgboter/bbs/build03--cen7x86_64/buildbot/cen7x86_64--arm-none-linux-gnueabihf/build/src/gcc/libstdc++-v3/libsupc++/eh_alloc.cc:284: undefined reference to `malloc'
...
Update the regular expression to match the above paths.
Link: https://lkml.kernel.org/r/20210923143842.2837983-1-jerome@forissier.org
Signed-off-by: Jerome Forissier <jerome@forissier.org>
Acked-by: Joe Perches <joe@perches.com>
Cc: Andy Whitcroft <apw@canonical.com>
Cc: Dwaipayan Ray <dwaipayanray1@gmail.com>
Cc: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When --nogit is used with scripts/get_maintainer.pl, the script spews 4
lines of unnecessary information (noise). Do not print those lines when
--nogit is specified.
This change removes the printing of these 4 lines:
./scripts/get_maintainer.pl: No supported VCS found. Add --nogit to options?
Using a git repository produces better results.
Try Linus Torvalds' latest git repository using:
git clone git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
Link: https://lkml.kernel.org/r/20220102031424.3328-1-rdunlap@infradead.org
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Currently the syscalls rst and subsequently man page are auto-generated
using function documentation present in bpf.h. If the documentation for the
syscall is missing or doesn't follow a specific format, then that syscall
is not dumped in the auto-generated rst.
This patch checks the number of syscalls documented within the header file
with those present as part of the enum bpf_cmd and raises an Exception if
they don't match. It is not needed with the currently documented upstream
syscalls, but can help in debugging when developing new syscalls when
there might be missing or misformatted documentation.
The function helper_number_check is moved to the Printer parent
class and renamed to elem_number_check as all the most derived children
classes are using this function now.
Signed-off-by: Usama Arif <usama.arif@bytedance.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20220119114442.1452088-3-usama.arif@bytedance.com
This enforce a minimal formatting consistency for the documentation. The
description and returns missing for a few helpers have also been added.
Signed-off-by: Usama Arif <usama.arif@bytedance.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20220119114442.1452088-2-usama.arif@bytedance.com
The 0day bot discovered a possible uninitialized path in the
scripts that sort the mcount sections at build time. Just needed
to initialize that variable.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCYedJ+BQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qntkAPsHuJFzSO4qvYDACoYv3CQbslOD531t
48VqbdWebYT3IwD+LXOgNpvLrMW7dNBanZBH9GNRtaRYTgQpfccNLVyPrws=
=Reqb
-----END PGP SIGNATURE-----
Merge tag 'trace-v5.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fix from Steven Rostedt:
"tracing/scripts: Possible uninitialized variable
The 0day bot discovered a possible uninitialized path in the scripts
that sort the mcount sections at build time. Just needed to initialize
that variable"
* tag 'trace-v5.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
script/sorttable: Fix some initialization problems
* Support for the DA9063 as used on the HiFive Unmatched.
* Support for relative extables, which puts us in line with other
architectures and save some space in vmlinux.
* A handful of kexec fixes/improvements, including the ability to run
crash kernels from PCI-addressable memory on the HiFive Unmatched.
* Support for the SBI SRST extension, which allows systems that do not
have an explicit driver in Linux to reboot.
* A handful of fixes and cleanups, including to the defconfigs and
device trees.
---
This time I do expect to have a part 2, as there's still some smaller
patches on the list. I was hoping to get through more of that over the
weekend, but I got distracted with the ABI issues. Figured it's better
to send this sooner rather than waiting.
Included are my merge resolutions against a master from this morning, if
that helps any:
diff --cc arch/riscv/include/asm/sbi.h
index 289621da4a2a,9c46dd3ff4a2..000000000000
--- a/arch/riscv/include/asm/sbi.h
+++ b/arch/riscv/include/asm/sbi.h
@@@ -27,7 -27,14 +27,15 @@@ enum sbi_ext_id
SBI_EXT_IPI = 0x735049,
SBI_EXT_RFENCE = 0x52464E43,
SBI_EXT_HSM = 0x48534D,
+ SBI_EXT_SRST = 0x53525354,
+
+ /* Experimentals extensions must lie within this range */
+ SBI_EXT_EXPERIMENTAL_START = 0x08000000,
+ SBI_EXT_EXPERIMENTAL_END = 0x08FFFFFF,
+
+ /* Vendor extensions must lie within this range */
+ SBI_EXT_VENDOR_START = 0x09000000,
+ SBI_EXT_VENDOR_END = 0x09FFFFFF,
};
enum sbi_ext_base_fid {
diff --git a/arch/riscv/boot/dts/sifive/hifive-unmatched-a00.dts b/arch/riscv/boot/dts/sifive/hifive-unmatched-a00.dts
index e03a4c94cf3f..6bfa1f24d3de 100644
--- a/arch/riscv/boot/dts/sifive/hifive-unmatched-a00.dts
+++ b/arch/riscv/boot/dts/sifive/hifive-unmatched-a00.dts
@@ -188,14 +188,6 @@ vdd_ldo11: ldo11 {
regulator-always-on;
};
};
-
- rtc {
- compatible = "dlg,da9063-rtc";
- };
-
- wdt {
- compatible = "dlg,da9063-watchdog";
- };
};
};
-----BEGIN PGP SIGNATURE-----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=uqtf
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-5.17-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V updates from Palmer Dabbelt:
- Support for the DA9063 as used on the HiFive Unmatched.
- Support for relative extables, which puts us in line with other
architectures and save some space in vmlinux.
- A handful of kexec fixes/improvements, including the ability to run
crash kernels from PCI-addressable memory on the HiFive Unmatched.
- Support for the SBI SRST extension, which allows systems that do not
have an explicit driver in Linux to reboot.
- A handful of fixes and cleanups, including to the defconfigs and
device trees.
* tag 'riscv-for-linus-5.17-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (52 commits)
RISC-V: Use SBI SRST extension when available
riscv: mm: fix wrong phys_ram_base value for RV64
RISC-V: Use common riscv_cpuid_to_hartid_mask() for both SMP=y and SMP=n
riscv: head: remove useless __PAGE_ALIGNED_BSS and .balign
riscv: errata: alternative: mark vendor_patch_func __initdata
riscv: head: make secondary_start_common() static
riscv: remove cpu_stop()
riscv: try to allocate crashkern region from 32bit addressible memory
riscv: use hart id instead of cpu id on machine_kexec
riscv: Don't use va_pa_offset on kdump
riscv: dts: sifive: fu540-c000: Fix PLIC node
riscv: dts: sifive: fu540-c000: Drop bogus soc node compatible values
riscv: dts: sifive: Group tuples in register properties
riscv: dts: sifive: Group tuples in interrupt properties
riscv: dts: microchip: mpfs: Group tuples in interrupt properties
riscv: dts: microchip: mpfs: Fix clock controller node
riscv: dts: microchip: mpfs: Fix reference clock node
riscv: dts: microchip: mpfs: Fix PLIC node
riscv: dts: microchip: mpfs: Drop empty chosen node
riscv: dts: canaan: Group tuples in interrupt properties
...
- Add new kconfig target 'make mod2noconfig', which will be useful to
speed up the build and test iteration.
- Raise the minimum supported version of LLVM to 11.0.0
- Refactor certs/Makefile
- Change the format of include/config/auto.conf to stop double-quoting
string type CONFIG options.
- Fix ARCH=sh builds in dash
- Separate compression macros for general purposes (cmd_bzip2 etc.) and
the ones for decompressors (cmd_bzip2_with_size etc.)
- Misc Makefile cleanups
-----BEGIN PGP SIGNATURE-----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=8BQf
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Add new kconfig target 'make mod2noconfig', which will be useful to
speed up the build and test iteration.
- Raise the minimum supported version of LLVM to 11.0.0
- Refactor certs/Makefile
- Change the format of include/config/auto.conf to stop double-quoting
string type CONFIG options.
- Fix ARCH=sh builds in dash
- Separate compression macros for general purposes (cmd_bzip2 etc.) and
the ones for decompressors (cmd_bzip2_with_size etc.)
- Misc Makefile cleanups
* tag 'kbuild-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (34 commits)
kbuild: add cmd_file_size
arch: decompressor: remove useless vmlinux.bin.all-y
kbuild: rename cmd_{bzip2,lzma,lzo,lz4,xzkern,zstd22}
kbuild: drop $(size_append) from cmd_zstd
sh: rename suffix-y to suffix_y
doc: kbuild: fix default in `imply` table
microblaze: use built-in function to get CPU_{MAJOR,MINOR,REV}
certs: move scripts/extract-cert to certs/
kbuild: do not quote string values in include/config/auto.conf
kbuild: do not include include/config/auto.conf from shell scripts
certs: simplify $(srctree)/ handling and remove config_filename macro
kbuild: stop using config_filename in scripts/Makefile.modsign
certs: remove misleading comments about GCC PR
certs: refactor file cleaning
certs: remove unneeded -I$(srctree) option for system_certificates.o
certs: unify duplicated cmd_extract_certs and improve the log
certs: use $< and $@ to simplify the key generation rule
kbuild: remove headers_check stub
kbuild: move headers_check.pl to usr/include/
certs: use if_changed to re-generate the key when the key type is changed
...
