Handle the error in a condition so the good path can be in the normal
flow.
Link: https://lkml.kernel.org/r/20230126215125.4069751-8-kbusch@meta.com
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Tony Battersby <tonyb@cybernetics.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Clean up the normal path by moving the debug code outside it.
Link: https://lkml.kernel.org/r/20230126215125.4069751-7-kbusch@meta.com
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Tony Battersby <tonyb@cybernetics.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Avoid double-memset of the same allocated memory in dma_pool_alloc() when
both DMAPOOL_DEBUG is enabled and init_on_alloc=1.
Link: https://lkml.kernel.org/r/20230126215125.4069751-6-kbusch@meta.com
Signed-off-by: Tony Battersby <tonyb@cybernetics.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
To represent the size of a single allocation, dmapool currently uses
'unsigned int' in some places and 'size_t' in other places. Standardize
on 'unsigned int' to reduce overhead, but use 'size_t' when counting all
the blocks in the entire pool.
Link: https://lkml.kernel.org/r/20230126215125.4069751-5-kbusch@meta.com
Signed-off-by: Tony Battersby <tonyb@cybernetics.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Use sysfs_emit instead of scnprintf, snprintf or sprintf.
Link: https://lkml.kernel.org/r/20230126215125.4069751-4-kbusch@meta.com
Signed-off-by: Tony Battersby <tonyb@cybernetics.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
dmapool originally tried to support pools without a device because
dma_alloc_coherent() supports allocations without a device. But nobody
ended up using dma pools without a device, and trying to do so will result
in an oops. So remove the checks for pool->dev == NULL since they are
unneeded bloat.
[kbusch@kernel.org: add check for null dev on create]
Link: https://lkml.kernel.org/r/20230126215125.4069751-3-kbusch@meta.com
Signed-off-by: Tony Battersby <tonyb@cybernetics.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "dmapool enhancements", v4.
Time spent in dma_pool alloc/free increases linearly with the number of
pages backing the pool. We can reduce this to constant time with minor
changes to how free pages are tracked.
This patch (of 12):
Provide a module that allocates and frees many blocks of various sizes and
report how long it takes. This is intended to provide a consistent way to
measure how changes to the dma_pool_alloc/free routines affect timing.
Link: https://lkml.kernel.org/r/20230126215125.4069751-1-kbusch@meta.com
Link: https://lkml.kernel.org/r/20230126215125.4069751-2-kbusch@meta.com
Signed-off-by: Keith Busch <kbusch@kernel.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Tony Battersby <tonyb@cybernetics.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
TRANSPARENT_HUGEPAGE_NEVER_DAX has nothing to do with DAX. It's set when
has_transparent_hugepage() returns false, checked in hugepage_vma_check()
and will disable THP completely if false. Rename it to
TRANSPARENT_HUGEPAGE_UNSUPPORTED to reflect its real purpose.
[peterx@redhat.com: fix comment, per David]
Link: https://lkml.kernel.org/r/ZBMzQW674oHQJV7F@x1n
Link: https://lkml.kernel.org/r/20230315171642.1244625-1-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Yang Shi <shy828301@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
It's more clear and simple to just use IS_ENABLED(CONFIG_HWPOISON_INJECT)
to check whether or not to enable HWPoison injector module instead of
CONFIG_HWPOISON_INJECT/CONFIG_HWPOISON_INJECT_MODULE.
Link: https://lkml.kernel.org/r/20230313053929.84607-1-wangkefeng.wang@huawei.com
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Acked-by: Naoya Horiguchi <naoya.horiguchi@nec.com>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Now there are no readers of shrinker_rwsem, so we can simply replace it
with mutex lock.
Link: https://lkml.kernel.org/r/20230313112819.38938-9-zhengqi.arch@bytedance.com
Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Kirill Tkhai <tkhai@ya.ru>
Acked-by: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Christian König <christian.koenig@amd.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Sultan Alsawaf <sultan@kerneltoast.com>
Cc: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Cc: Yang Shi <shy828301@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Currently, the synchronize_shrinkers() is only used by TTM pool. It only
requires that no shrinkers run in parallel, and doesn't care about
registering and unregistering of shrinkers.
Since slab shrink is protected by SRCU, synchronize_srcu() is sufficient
to ensure that no shrinker is running in parallel. So the shrinker_rwsem
in synchronize_shrinkers() is no longer needed, just remove it.
Link: https://lkml.kernel.org/r/20230313112819.38938-8-zhengqi.arch@bytedance.com
Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Kirill Tkhai <tkhai@ya.ru>
Acked-by: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Christian König <christian.koenig@amd.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Sultan Alsawaf <sultan@kerneltoast.com>
Cc: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Cc: Yang Shi <shy828301@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
For now, reparent_shrinker_deferred() is the only holder of read lock of
shrinker_rwsem. And it already holds the global cgroup_mutex, so it will
not be called in parallel.
Therefore, in order to convert shrinker_rwsem to shrinker_mutex later,
here we change to hold the write lock of shrinker_rwsem to reparent.
Link: https://lkml.kernel.org/r/20230313112819.38938-7-zhengqi.arch@bytedance.com
Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Kirill Tkhai <tkhai@ya.ru>
Acked-by: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Christian König <christian.koenig@amd.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Sultan Alsawaf <sultan@kerneltoast.com>
Cc: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Cc: Yang Shi <shy828301@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Like global and memcg slab shrink, also use SRCU to make count and scan
operations in memory shrinker debugfs lockless.
Link: https://lkml.kernel.org/r/20230313112819.38938-6-zhengqi.arch@bytedance.com
Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Kirill Tkhai <tkhai@ya.ru>
Acked-by: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Christian König <christian.koenig@amd.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Sultan Alsawaf <sultan@kerneltoast.com>
Cc: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Cc: Yang Shi <shy828301@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
After we make slab shrink lockless with SRCU, the longest sleep
unregister_shrinker() will be a sleep waiting for all do_shrink_slab()
calls.
To avoid long unbreakable action in the unregister_shrinker(), add
shrinker_srcu_generation to restore a check similar to the
rwsem_is_contendent() check that we had before.
And for memcg slab shrink, we unlock SRCU and continue iterations from the
next shrinker id.
Link: https://lkml.kernel.org/r/20230313112819.38938-5-zhengqi.arch@bytedance.com
Signed-off-by: Kirill Tkhai <tkhai@ya.ru>
Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Christian König <christian.koenig@amd.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Sultan Alsawaf <sultan@kerneltoast.com>
Cc: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Cc: Yang Shi <shy828301@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Like global slab shrink, this commit also uses SRCU to make memcg slab
shrink lockless.
We can reproduce the down_read_trylock() hotspot through the
following script:
```
DIR="/root/shrinker/memcg/mnt"
do_create()
{
mkdir -p /sys/fs/cgroup/memory/test
mkdir -p /sys/fs/cgroup/perf_event/test
echo 4G > /sys/fs/cgroup/memory/test/memory.limit_in_bytes
for i in `seq 0 $1`;
do
mkdir -p /sys/fs/cgroup/memory/test/$i;
echo $$ > /sys/fs/cgroup/memory/test/$i/cgroup.procs;
echo $$ > /sys/fs/cgroup/perf_event/test/cgroup.procs;
mkdir -p $DIR/$i;
done
}
do_mount()
{
for i in `seq $1 $2`;
do
mount -t tmpfs $i $DIR/$i;
done
}
do_touch()
{
for i in `seq $1 $2`;
do
echo $$ > /sys/fs/cgroup/memory/test/$i/cgroup.procs;
echo $$ > /sys/fs/cgroup/perf_event/test/cgroup.procs;
dd if=/dev/zero of=$DIR/$i/file$i bs=1M count=1 &
done
}
case "$1" in
touch)
do_touch $2 $3
;;
test)
do_create 4000
do_mount 0 4000
do_touch 0 3000
;;
*)
exit 1
;;
esac
```
Save the above script, then run test and touch commands.
Then we can use the following perf command to view hotspots:
perf top -U -F 999
1) Before applying this patchset:
32.31% [kernel] [k] down_read_trylock
19.40% [kernel] [k] pv_native_safe_halt
16.24% [kernel] [k] up_read
15.70% [kernel] [k] shrink_slab
4.69% [kernel] [k] _find_next_bit
2.62% [kernel] [k] shrink_node
1.78% [kernel] [k] shrink_lruvec
0.76% [kernel] [k] do_shrink_slab
2) After applying this patchset:
27.83% [kernel] [k] _find_next_bit
16.97% [kernel] [k] shrink_slab
15.82% [kernel] [k] pv_native_safe_halt
9.58% [kernel] [k] shrink_node
8.31% [kernel] [k] shrink_lruvec
5.64% [kernel] [k] do_shrink_slab
3.88% [kernel] [k] mem_cgroup_iter
At the same time, we use the following perf command to capture
IPC information:
perf stat -e cycles,instructions -G test -a --repeat 5 -- sleep 10
1) Before applying this patchset:
Performance counter stats for 'system wide' (5 runs):
454187219766 cycles test ( +- 1.84% )
78896433101 instructions test # 0.17 insn per cycle ( +- 0.44% )
10.0020430 +- 0.0000366 seconds time elapsed ( +- 0.00% )
2) After applying this patchset:
Performance counter stats for 'system wide' (5 runs):
841954709443 cycles test ( +- 15.80% ) (98.69%)
527258677936 instructions test # 0.63 insn per cycle ( +- 15.11% ) (98.68%)
10.01064 +- 0.00831 seconds time elapsed ( +- 0.08% )
We can see that IPC drops very seriously when calling
down_read_trylock() at high frequency. After using SRCU,
the IPC is at a normal level.
Link: https://lkml.kernel.org/r/20230313112819.38938-4-zhengqi.arch@bytedance.com
Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Acked-by: Kirill Tkhai <tkhai@ya.ru>
Acked-by: Vlastimil Babka <Vbabka@suse.cz>
Acked-by: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Christian König <christian.koenig@amd.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Sultan Alsawaf <sultan@kerneltoast.com>
Cc: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Cc: Yang Shi <shy828301@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The shrinker_rwsem is a global read-write lock in shrinkers subsystem,
which protects most operations such as slab shrink, registration and
unregistration of shrinkers, etc. This can easily cause problems in the
following cases.
1) When the memory pressure is high and there are many
filesystems mounted or unmounted at the same time,
slab shrink will be affected (down_read_trylock()
failed).
Such as the real workload mentioned by Kirill Tkhai:
```
One of the real workloads from my experience is start
of an overcommitted node containing many starting
containers after node crash (or many resuming containers
after reboot for kernel update). In these cases memory
pressure is huge, and the node goes round in long reclaim.
```
2) If a shrinker is blocked (such as the case mentioned
in [1]) and a writer comes in (such as mount a fs),
then this writer will be blocked and cause all
subsequent shrinker-related operations to be blocked.
Even if there is no competitor when shrinking slab, there may still be a
problem. If we have a long shrinker list and we do not reclaim enough
memory with each shrinker, then the down_read_trylock() may be called with
high frequency. Because of the poor multicore scalability of atomic
operations, this can lead to a significant drop in IPC (instructions per
cycle).
So many times in history ([2],[3],[4],[5]), some people wanted to replace
shrinker_rwsem trylock with SRCU in the slab shrink, but all these patches
were abandoned because SRCU was not unconditionally enabled.
But now, since commit 1cd0bd06093c ("rcu: Remove CONFIG_SRCU"), the SRCU
is unconditionally enabled. So it's time to use SRCU to protect readers
who previously held shrinker_rwsem.
This commit uses SRCU to make global slab shrink lockless,
the memcg slab shrink is handled in the subsequent patch.
[1]. https://lore.kernel.org/lkml/20191129214541.3110-1-ptikhomirov@virtuozzo.com/
[2]. https://lore.kernel.org/all/1437080113.3596.2.camel@stgolabs.net/
[3]. https://lore.kernel.org/lkml/1510609063-3327-1-git-send-email-penguin-kernel@I-love.SAKURA.ne.jp/
[4]. https://lore.kernel.org/lkml/153365347929.19074.12509495712735843805.stgit@localhost.localdomain/
[5]. https://lore.kernel.org/lkml/20210927074823.5825-1-sultan@kerneltoast.com/
Link: https://lkml.kernel.org/r/20230313112819.38938-3-zhengqi.arch@bytedance.com
Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Kirill Tkhai <tkhai@ya.ru>
Acked-by: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Christian König <christian.koenig@amd.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Yang Shi <shy828301@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "make slab shrink lockless", v5.
This patch series aims to make slab shrink lockless.
1. Background
=============
On our servers, we often find the following system cpu hotspots:
52.22% [kernel] [k] down_read_trylock
19.60% [kernel] [k] up_read
8.86% [kernel] [k] shrink_slab
2.44% [kernel] [k] idr_find
1.25% [kernel] [k] count_shadow_nodes
1.18% [kernel] [k] shrink lruvec
0.71% [kernel] [k] mem_cgroup_iter
0.71% [kernel] [k] shrink_node
0.55% [kernel] [k] find_next_bit
And we used bpftrace to capture its calltrace as follows:
@[
down_read_trylock+1
shrink_slab+128
shrink_node+371
do_try_to_free_pages+232
try_to_free_pages+243
_alloc_pages_slowpath+771
_alloc_pages_nodemask+702
pagecache_get_page+255
filemap_fault+1361
ext4_filemap_fault+44
__do_fault+76
handle_mm_fault+3543
do_user_addr_fault+442
do_page_fault+48
page_fault+62
]: 1161690
@[
down_read_trylock+1
shrink_slab+128
shrink_node+371
balance_pgdat+690
kswapd+389
kthread+246
ret_from_fork+31
]: 8424884
@[
down_read_trylock+1
shrink_slab+128
shrink_node+371
do_try_to_free_pages+232
try_to_free_pages+243
__alloc_pages_slowpath+771
__alloc_pages_nodemask+702
__do_page_cache_readahead+244
filemap_fault+1674
ext4_filemap_fault+44
__do_fault+76
handle_mm_fault+3543
do_user_addr_fault+442
do_page_fault+48
page_fault+62
]: 20917631
We can see that down_read_trylock() of shrinker_rwsem is being called with
high frequency at that time. Because of the poor multicore scalability of
atomic operations, this can lead to a significant drop in IPC
(instructions per cycle).
And more, the shrinker_rwsem is a global read-write lock in shrinkers
subsystem, which protects most operations such as slab shrink,
registration and unregistration of shrinkers, etc. This can easily cause
problems in the following cases.
1) When the memory pressure is high and there are many filesystems
mounted or unmounted at the same time, slab shrink will be affected
(down_read_trylock() failed).
Such as the real workload mentioned by Kirill Tkhai:
```
One of the real workloads from my experience is start of an
overcommitted node containing many starting containers after node crash
(or many resuming containers after reboot for kernel update). In these
cases memory pressure is huge, and the node goes round in long reclaim.
```
2) If a shrinker is blocked (such as the case mentioned in [1]) and a
writer comes in (such as mount a fs), then this writer will be blocked
and cause all subsequent shrinker-related operations to be blocked.
[1]. https://lore.kernel.org/lkml/20191129214541.3110-1-ptikhomirov@virtuozzo.com/
All the above cases can be solved by replacing the shrinker_rwsem trylocks
with SRCU.
2. Survey
=========
Before doing the code implementation, I found that there were many similar
submissions in the community:
a. Davidlohr Bueso submitted a patch in 2015.
Subject: [PATCH -next v2] mm: srcu-ify shrinkers
Link: https://lore.kernel.org/all/1437080113.3596.2.camel@stgolabs.net/
Result: It was finally merged into the linux-next branch,
but failed on arm allnoconfig (without CONFIG_SRCU)
b. Tetsuo Handa submitted a patchset in 2017.
Subject: [PATCH 1/2] mm,vmscan: Kill global shrinker lock.
Link: https://lore.kernel.org/lkml/1510609063-3327-1-git-send-email-penguin-kernel@I-love.SAKURA.ne.jp/
Result: Finally chose to use the current simple way (break
when rwsem_is_contended()). And Christoph Hellwig suggested to
using SRCU, but SRCU was not unconditionally enabled at the
time.
c. Kirill Tkhai submitted a patchset in 2018.
Subject: [PATCH RFC 00/10] Introduce lockless shrink_slab()
Link: https://lore.kernel.org/lkml/153365347929.19074.12509495712735843805.stgit@localhost.localdomain/
Result: At that time, SRCU was not unconditionally enabled,
and there were some objections to enabling SRCU. Later,
because Kirill's focus was moved to other things, this patchset
was not continued to be updated.
d. Sultan Alsawaf submitted a patch in 2021.
Subject: [PATCH] mm: vmscan: Replace shrinker_rwsem trylocks with SRCU protection
Link: https://lore.kernel.org/lkml/20210927074823.5825-1-sultan@kerneltoast.com/
Result: Rejected because SRCU was not unconditionally enabled.
We can find that almost all these historical commits were abandoned
because SRCU was not unconditionally enabled. But now SRCU has been
unconditionally enable by Paul E. McKenney in 2023 [2], so it's time to
replace shrinker_rwsem trylocks with SRCU.
[2] https://lore.kernel.org/lkml/20230105003759.GA1769545@paulmck-ThinkPad-P17-Gen-1/
3. Reproduction and testing
===========================
We can reproduce the down_read_trylock() hotspot through the following script:
```
#!/bin/bash
DIR="/root/shrinker/memcg/mnt"
do_create()
{
mkdir -p /sys/fs/cgroup/memory/test
mkdir -p /sys/fs/cgroup/perf_event/test
echo 4G > /sys/fs/cgroup/memory/test/memory.limit_in_bytes
for i in `seq 0 $1`;
do
mkdir -p /sys/fs/cgroup/memory/test/$i;
echo $$ > /sys/fs/cgroup/memory/test/$i/cgroup.procs;
echo $$ > /sys/fs/cgroup/perf_event/test/cgroup.procs;
mkdir -p $DIR/$i;
done
}
do_mount()
{
for i in `seq $1 $2`;
do
mount -t tmpfs $i $DIR/$i;
done
}
do_touch()
{
for i in `seq $1 $2`;
do
echo $$ > /sys/fs/cgroup/memory/test/$i/cgroup.procs;
echo $$ > /sys/fs/cgroup/perf_event/test/cgroup.procs;
dd if=/dev/zero of=$DIR/$i/file$i bs=1M count=1 &
done
}
case "$1" in
touch)
do_touch $2 $3
;;
test)
do_create 4000
do_mount 0 4000
do_touch 0 3000
;;
*)
exit 1
;;
esac
```
Save the above script, then run test and touch commands. Then we can use
the following perf command to view hotspots:
perf top -U -F 999
1) Before applying this patchset:
32.31% [kernel] [k] down_read_trylock
19.40% [kernel] [k] pv_native_safe_halt
16.24% [kernel] [k] up_read
15.70% [kernel] [k] shrink_slab
4.69% [kernel] [k] _find_next_bit
2.62% [kernel] [k] shrink_node
1.78% [kernel] [k] shrink_lruvec
0.76% [kernel] [k] do_shrink_slab
2) After applying this patchset:
27.83% [kernel] [k] _find_next_bit
16.97% [kernel] [k] shrink_slab
15.82% [kernel] [k] pv_native_safe_halt
9.58% [kernel] [k] shrink_node
8.31% [kernel] [k] shrink_lruvec
5.64% [kernel] [k] do_shrink_slab
3.88% [kernel] [k] mem_cgroup_iter
At the same time, we use the following perf command to capture IPC
information:
perf stat -e cycles,instructions -G test -a --repeat 5 -- sleep 10
1) Before applying this patchset:
Performance counter stats for 'system wide' (5 runs):
454187219766 cycles test ( +- 1.84% )
78896433101 instructions test # 0.17 insn per cycle ( +- 0.44% )
10.0020430 +- 0.0000366 seconds time elapsed ( +- 0.00% )
2) After applying this patchset:
Performance counter stats for 'system wide' (5 runs):
841954709443 cycles test ( +- 15.80% ) (98.69%)
527258677936 instructions test # 0.63 insn per cycle ( +- 15.11% ) (98.68%)
10.01064 +- 0.00831 seconds time elapsed ( +- 0.08% )
We can see that IPC drops very seriously when calling down_read_trylock()
at high frequency. After using SRCU, the IPC is at a normal level.
This patch (of 8):
To prepare for the subsequent lockless memcg slab shrink, add a map_nr_max
field to struct shrinker_info to records its own real shrinker_nr_max.
Link: https://lkml.kernel.org/r/20230313112819.38938-1-zhengqi.arch@bytedance.com
Link: https://lkml.kernel.org/r/20230313112819.38938-2-zhengqi.arch@bytedance.com
Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Suggested-by: Kirill Tkhai <tkhai@ya.ru>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Kirill Tkhai <tkhai@ya.ru>
Acked-by: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Christian König <christian.koenig@amd.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Sultan Alsawaf <sultan@kerneltoast.com>
Cc: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Cc: Yang Shi <shy828301@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Code inspection reveals that PG_skip_kasan_poison is redundant with
kasantag, because the former is intended to be set iff the latter is the
match-all tag. It can also be observed that it's basically pointless to
poison pages which have kasantag=0, because any pages with this tag would
have been pointed to by pointers with match-all tags, so poisoning the
pages would have little to no effect in terms of bug detection.
Therefore, change the condition in should_skip_kasan_poison() to check
kasantag instead, and remove PG_skip_kasan_poison and associated flags.
Link: https://lkml.kernel.org/r/20230310042914.3805818-3-pcc@google.com
Link: https://linux-review.googlesource.com/id/I57f825f2eaeaf7e8389d6cf4597c8a5821359838
Signed-off-by: Peter Collingbourne <pcc@google.com>
Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
io_mapping_map_atomic_wc() disables preemption and pagefaults for
historical reasons. The conversion to io_mapping_map_local_wc(), which
only disables migration, cannot be done wholesale because quite some call
sites need to be updated to accommodate with the changed semantics.
On PREEMPT_RT enabled kernels the io_mapping_map_atomic_wc() semantics are
problematic due to the implicit disabling of preemption which makes it
impossible to acquire 'sleeping' spinlocks within the mapped atomic
sections.
PREEMPT_RT replaces the preempt_disable() with a migrate_disable() for
more than a decade. It could be argued that this is a justification to do
this unconditionally, but PREEMPT_RT covers only a limited number of
architectures and it disables some functionality which limits the coverage
further.
Limit the replacement to PREEMPT_RT for now. This is also done
kmap_atomic().
Link: https://lkml.kernel.org/r/20230310162905.O57Pj7hh@linutronix.de
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reported-by: Richard Weinberger <richard.weinberger@gmail.com>
Link: https://lore.kernel.org/CAFLxGvw0WMxaMqYqJ5WgvVSbKHq2D2xcXTOgMCpgq9nDC-MWTQ@mail.gmail.com
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
In doing experimentations with shmem having the option to avoid swap
becomes a useful mechanism. One of the *raves* about brd over shmem is
you can avoid swap, but that's not really a good reason to use brd if we
can instead use shmem. Using brd has its own good reasons to exist, but
just because "tmpfs" doesn't let you do that is not a great reason to
avoid it if we can easily add support for it.
I don't add support for reconfiguring incompatible options, but if we
really wanted to we can add support for that.
To avoid swap we use mapping_set_unevictable() upon inode creation, and
put a WARN_ON_ONCE() stop-gap on writepages() for reclaim.
Link: https://lkml.kernel.org/r/20230309230545.2930737-7-mcgrof@kernel.org
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Acked-by: Christian Brauner <brauner@kernel.org>
Tested-by: Xin Hao <xhao@linux.alibaba.com>
Reviewed-by: Davidlohr Bueso <dave@stgolabs.net>
Cc: Adam Manzanares <a.manzanares@samsung.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Hugh Dickins <hughd@google.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Pankaj Raghav <p.raghav@samsung.com>
Cc: Yosry Ahmed <yosryahmed@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Update the docs to reflect a bit better why some folks prefer tmpfs over
ramfs and clarify a bit more about the difference between brd ramdisks.
While at it, add THP docs for tmpfs, both the mount options and the sysfs
file.
Link: https://lkml.kernel.org/r/20230309230545.2930737-6-mcgrof@kernel.org
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Tested-by: Xin Hao <xhao@linux.alibaba.com>
Reviewed-by: Davidlohr Bueso <dave@stgolabs.net>
Cc: Adam Manzanares <a.manzanares@samsung.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Hugh Dickins <hughd@google.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Pankaj Raghav <p.raghav@samsung.com>
Cc: Yosry Ahmed <yosryahmed@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
In theory when info->flags & VM_LOCKED we should not be getting
shem_writepage() called so we should be verifying this with a
WARN_ON_ONCE(). Since we should not be swapping then best to ensure we
also don't do the folio split earlier too. So just move the check early
to avoid folio splits in case its a dubious call.
We also have a similar early bail when !total_swap_pages so just move that
earlier to avoid the possible folio split in the same situation.
Link: https://lkml.kernel.org/r/20230309230545.2930737-5-mcgrof@kernel.org
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Reviewed-by: Yosry Ahmed <yosryahmed@google.com>
Tested-by: Xin Hao <xhao@linux.alibaba.com>
Reviewed-by: Davidlohr Bueso <dave@stgolabs.net>
Cc: Adam Manzanares <a.manzanares@samsung.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Hugh Dickins <hughd@google.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Pankaj Raghav <p.raghav@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
i915_gem requires huge folios to be split when swapping. However we have
check for usage of writepages() to ensure it used only for swap purposes
later. Avoid the splits if we're not being called for reclaim, even if
they should in theory not happen.
This makes the conditions easier to follow on shem_writepage().
Link: https://lkml.kernel.org/r/20230309230545.2930737-4-mcgrof@kernel.org
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Yosry Ahmed <yosryahmed@google.com>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Tested-by: Xin Hao <xhao@linux.alibaba.com>
Reviewed-by: Davidlohr Bueso <dave@stgolabs.net>
Cc: Adam Manzanares <a.manzanares@samsung.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Hugh Dickins <hughd@google.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Pankaj Raghav <p.raghav@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
shmem_writepage() sets up variables typically used *after* a possible huge
page split. However even if that does happen the address space mapping
should not change, and the inode does not change either. So it should be
safe to set that from the very beginning.
This commit makes no functional changes.
Link: https://lkml.kernel.org/r/20230309230545.2930737-3-mcgrof@kernel.org
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Tested-by: Xin Hao <xhao@linux.alibaba.com>
Reviewed-by: Davidlohr Bueso <dave@stgolabs.net>
Cc: Adam Manzanares <a.manzanares@samsung.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Hugh Dickins <hughd@google.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Pankaj Raghav <p.raghav@samsung.com>
Cc: Yosry Ahmed <yosryahmed@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "tmpfs: add the option to disable swap", v2.
I'm doing this work as part of future experimentation with tmpfs and the
page cache, but given a common complaint found about tmpfs is the
innability to work without the page cache I figured this might be useful
to others. It turns out it is -- at least Christian Brauner indicates
systemd uses ramfs for a few use-cases because they don't want to use swap
and so having this option would let them move over to using tmpfs for
those small use cases, see systemd-creds(1).
To see if you hit swap:
mkswap /dev/nvme2n1
swapon /dev/nvme2n1
free -h
With swap - what we see today
=============================
mount -t tmpfs -o size=5G tmpfs /data-tmpfs/
dd if=/dev/urandom of=/data-tmpfs/5g-rand2 bs=1G count=5
free -h
total used free shared buff/cache available
Mem: 3.7Gi 2.6Gi 1.2Gi 2.2Gi 2.2Gi 1.2Gi
Swap: 99Gi 2.8Gi 97Gi
Without swap
=============
free -h
total used free shared buff/cache available
Mem: 3.7Gi 387Mi 3.4Gi 2.1Mi 57Mi 3.3Gi
Swap: 99Gi 0B 99Gi
mount -t tmpfs -o size=5G -o noswap tmpfs /data-tmpfs/
dd if=/dev/urandom of=/data-tmpfs/5g-rand2 bs=1G count=5
free -h
total used free shared buff/cache available
Mem: 3.7Gi 2.6Gi 1.2Gi 2.3Gi 2.3Gi 1.1Gi
Swap: 99Gi 21Mi 99Gi
The mix and match remount testing
=================================
# Cannot disable swap after it was first enabled:
mount -t tmpfs -o size=5G tmpfs /data-tmpfs/
mount -t tmpfs -o remount -o size=5G -o noswap tmpfs /data-tmpfs/
mount: /data-tmpfs: mount point not mounted or bad option.
dmesg(1) may have more information after failed mount system call.
dmesg -c
tmpfs: Cannot disable swap on remount
# Remount with the same noswap option is OK:
mount -t tmpfs -o size=5G -o noswap tmpfs /data-tmpfs/
mount -t tmpfs -o remount -o size=5G -o noswap tmpfs /data-tmpfs/
dmesg -c
# Trying to enable swap with a remount after it first disabled:
mount -t tmpfs -o size=5G -o noswap tmpfs /data-tmpfs/
mount -t tmpfs -o remount -o size=5G tmpfs /data-tmpfs/
mount: /data-tmpfs: mount point not mounted or bad option.
dmesg(1) may have more information after failed mount system call.
dmesg -c
tmpfs: Cannot enable swap on remount if it was disabled on first mount
This patch (of 6):
Matthew notes we should not need to check the folio lock on the
writepage() callback so remove it. This sanity check has been lingering
since linux-history days. We remove this as we tidy up the writepage()
callback to make things a bit clearer.
Link: https://lkml.kernel.org/r/20230309230545.2930737-1-mcgrof@kernel.org
Link: https://lkml.kernel.org/r/20230309230545.2930737-2-mcgrof@kernel.org
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Suggested-by: Matthew Wilcox <willy@infradead.org>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Tested-by: Xin Hao <xhao@linux.alibaba.com>
Reviewed-by: Davidlohr Bueso <dave@stgolabs.net>
Cc: Adam Manzanares <a.manzanares@samsung.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Hugh Dickins <hughd@google.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Pankaj Raghav <p.raghav@samsung.com>
Cc: Yosry Ahmed <yosryahmed@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Fix missing EXPORT_SYMBOL_GPL() statement for mas_preallocate().
It isn't actually used by anything yet, but mas_preallocate() is part of
the maple tree's 'Advanced API'. All other functions of this API are
exported already.
Link: https://lkml.kernel.org/r/20230302011035.4928-1-dakr@redhat.com
Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The last remaining user of folio_write_one through the write_one_page
wrapper is jfs, so move the functionality there and hard code the call to
metapage_writepage.
Note that the use of the pagecache by the JFS 'metapage' buffer cache is a
bit odd, and we could probably do without VM-level dirty tracking at all,
but that's a change for another time.
Link: https://lkml.kernel.org/r/20230307143125.27778-4-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Dave Kleikamp <dave.kleikamp@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Evgeniy Dushistov <dushistov@mail.ru>
Cc: Gang He <ghe@suse.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jan Kara via Ocfs2-devel <ocfs2-devel@oss.oracle.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Joseph Qi <jiangqi903@gmail.com>
Cc: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Jun Piao <piaojun@huawei.com>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Use filemap_write_and_wait_range to write back the range of the dirty page
instead of write_one_page in preparation of removing write_one_page and
eventually ->writepage.
Link: https://lkml.kernel.org/r/20230307143125.27778-3-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Dave Kleikamp <dave.kleikamp@oracle.com>
Cc: Evgeniy Dushistov <dushistov@mail.ru>
Cc: Gang He <ghe@suse.com>
Cc: Jan Kara via Ocfs2-devel <ocfs2-devel@oss.oracle.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Joseph Qi <jiangqi903@gmail.com>
Cc: Jun Piao <piaojun@huawei.com>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "remove most callers of write_one_page", v4.
This series removes most users of the write_one_page API. These helpers
internally call ->writepage which we are gradually removing from the
kernel.
This patch (of 3):
We do not need to writeout modified directory blocks immediately when
modifying them while the page is locked. It is enough to do the flush
somewhat later which has the added benefit that inode times can be flushed
as well. It also allows us to stop depending on write_one_page()
function.
Ported from an ext2 patch by Jan Kara.
Link: https://lkml.kernel.org/r/20230307143125.27778-1-hch@lst.de
Link: https://lkml.kernel.org/r/20230307143125.27778-2-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Cc: Dave Kleikamp <dave.kleikamp@oracle.com>
Cc: Evgeniy Dushistov <dushistov@mail.ru>
Cc: Jan Kara via Ocfs2-devel <ocfs2-devel@oss.oracle.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Joseph Qi <jiangqi903@gmail.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Joseph Qi <joseph.qi@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Ensure that KMSAN does not report false positives in instrumented callers
of stack_depot_save(), stack_depot_print(), and stack_depot_fetch().
Link: https://lkml.kernel.org/r/20230306111322.205724-2-glider@google.com
Signed-off-by: Alexander Potapenko <glider@google.com>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Marco Elver <elver@google.com>
Cc: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
KMSAN does not instrument stackdepot and may treat memory allocated by it
as uninitialized. This is not a problem for KMSAN itself, because its
functions calling stackdepot API are also not instrumented. But other
kernel features (e.g. netdev tracker) may access stack depot from
instrumented code, which will lead to false positives, unless we
explicitly mark stackdepot outputs as initialized.
Link: https://lkml.kernel.org/r/20230306111322.205724-1-glider@google.com
Signed-off-by: Alexander Potapenko <glider@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
Suggested-by: Dmitry Vyukov <dvyukov@google.com>
Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Marco Elver <elver@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The knob for cgroup v1 memory controller: memory.soft_limit_in_bytes is
not protected by any locking so it can be modified while it is used. This
is not an actual problem because races are unlikely. But it is better to
use [READ|WRITE]_ONCE to prevent compiler from doing anything funky.
The access of memcg->soft_limit is lockless, so it can be concurrently set
at the same time as we are trying to read it. All occurrences of
memcg->soft_limit are updated with [READ|WRITE]_ONCE.
[findns94@gmail.com: v3]
Link: https://lkml.kernel.org/r/20230308162555.14195-5-findns94@gmail.com
Link: https://lkml.kernel.org/r/20230306154138.3775-5-findns94@gmail.com
Signed-off-by: Yue Zhao <findns94@gmail.com>
Acked-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Roman Gushchin <roman.gushchin@linux.dev>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Tang Yizhou <tangyeechou@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The knob for cgroup v1 memory controller: memory.oom_control is not
protected by any locking so it can be modified while it is used. This is
not an actual problem because races are unlikely. But it is better to use
[READ|WRITE]_ONCE to prevent compiler from doing anything funky.
The access of memcg->oom_kill_disable is lockless, so it can be
concurrently set at the same time as we are trying to read it. All
occurrences of memcg->oom_kill_disable are updated with [READ|WRITE]_ONCE.
[findns94@gmail.com: v3]
Link: https://lkml.kernel.org/r/20230308162555.14195-4-findns94@gmail.com
Link: https://lkml.kernel.org/r/20230306154138.377-4-findns94@gmail.com
Signed-off-by: Yue Zhao <findns94@gmail.com>
Acked-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Roman Gushchin <roman.gushchin@linux.dev>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Tang Yizhou <tangyeechou@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The knob for cgroup v1 memory controller: memory.swappiness is not
protected by any locking so it can be modified while it is used. This is
not an actual problem because races are unlikely. But it is better to use
[READ|WRITE]_ONCE to prevent compiler from doing anything funky.
The access of memcg->swappiness and vm_swappiness is lockless, so both of
them can be concurrently set at the same time as we are trying to read
them. All occurrences of memcg->swappiness and vm_swappiness are updated
with [READ|WRITE]_ONCE.
[findns94@gmail.com: v3]
Link: https://lkml.kernel.org/r/20230308162555.14195-3-findns94@gmail.com
Link: https://lkml.kernel.org/r/20230306154138.3775-3-findns94@gmail.com
Signed-off-by: Yue Zhao <findns94@gmail.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Tang Yizhou <tangyeechou@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "mm, memcg: cgroup v1 and v2 tunable load/store tearing
fixes", v2.
This patch series helps to prevent load/store tearing in
several cgroup knobs.
As kindly pointed out by Michal Hocko and Roman Gushchin
, the changelog has been rephrased.
Besides, more knobs were checked, according to kind suggestions
from Shakeel Butt and Muchun Song.
This patch (of 4):
The knob for cgroup v2 memory controller: memory.oom.group
is not protected by any locking so it can be modified while it is used.
This is not an actual problem because races are unlikely (the knob is
usually configured long before any workloads hits actual memcg oom)
but it is better to use READ_ONCE/WRITE_ONCE to prevent compiler from
doing anything funky.
The access of memcg->oom_group is lockless, so it can be
concurrently set at the same time as we are trying to read it.
Link: https://lkml.kernel.org/r/20230306154138.3775-1-findns94@gmail.com
Link: https://lkml.kernel.org/r/20230306154138.3775-2-findns94@gmail.com
Signed-off-by: Yue Zhao <findns94@gmail.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Tang Yizhou <tangyeechou@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Fix two inputs to check_anon_huge() and one if condition, so the tests
work as expected.
Link: https://lkml.kernel.org/r/20230306160907.16804-1-zi.yan@sent.com
Fixes: c07c343cda ("selftests/vm: dedup THP helpers")
Signed-off-by: Zi Yan <ziy@nvidia.com>
Reviewed-by: Zach O'Keefe <zokeefe@google.com>
Tested-by: Zach O'Keefe <zokeefe@google.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
s390 can do more fine-grained handling of spurious TLB protection faults,
when there also is the PTE pointer available.
Therefore, pass on the PTE pointer to flush_tlb_fix_spurious_fault() as an
additional parameter.
This will add no functional change to other architectures, but those with
private flush_tlb_fix_spurious_fault() implementations need to be made
aware of the new parameter.
Link: https://lkml.kernel.org/r/20230306161548.661740-1-gerald.schaefer@linux.ibm.com
Signed-off-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com> [arm64]
Acked-by: Michael Ellerman <mpe@ellerman.id.au> [powerpc]
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Borislav Petkov (AMD) <bp@alien8.de>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
We keep the old fullness (3/4 threshold) reporting in
zs_stats_size_show(). Switch from allmost full/empty stats to
fine-grained per inuse ratio (fullness group) reporting, which gives
signicantly more data on classes fragmentation.
Link: https://lkml.kernel.org/r/20230304034835.2082479-5-senozhatsky@chromium.org
Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Acked-by: Minchan Kim <minchan@kernel.org>
Cc: Yosry Ahmed <yosryahmed@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The zsmalloc compaction algorithm has the potential to waste some CPU
cycles, particularly when compacting pages within the same fullness group.
This is due to the way it selects the head page of the fullness list for
source and destination pages, and how it reinserts those pages during each
iteration. The algorithm may first use a page as a migration destination
and then as a migration source, leading to an unnecessary back-and-forth
movement of objects.
Consider the following fullness list:
PageA PageB PageC PageD PageE
During the first iteration, the compaction algorithm will select PageA as
the source and PageB as the destination. All of PageA's objects will be
moved to PageB, and then PageA will be released while PageB is reinserted
into the fullness list.
PageB PageC PageD PageE
During the next iteration, the compaction algorithm will again select the
head of the list as the source and destination, meaning that PageB will
now serve as the source and PageC as the destination. This will result in
the objects being moved away from PageB, the same objects that were just
moved to PageB in the previous iteration.
To prevent this avalanche effect, the compaction algorithm should not
reinsert the destination page between iterations. By doing so, the most
optimal page will continue to be used and its usage ratio will increase,
reducing internal fragmentation. The destination page should only be
reinserted into the fullness list if:
- It becomes full
- No source page is available.
TEST
====
It's very challenging to reliably test this series. I ended up developing
my own synthetic test that has 100% reproducibility. The test generates
significan fragmentation (for each size class) and then performs
compaction for each class individually and tracks the number of memcpy()
in zs_object_copy(), so that we can compare the amount work compaction
does on per-class basis.
Total amount of work (zram mm_stat objs_moved)
----------------------------------------------
Old fullness grouping, old compaction algorithm:
323977 memcpy() in zs_object_copy().
Old fullness grouping, new compaction algorithm:
262944 memcpy() in zs_object_copy().
New fullness grouping, new compaction algorithm:
213978 memcpy() in zs_object_copy().
Per-class compaction memcpy() comparison (T-test)
-------------------------------------------------
x Old fullness grouping, old compaction algorithm
+ Old fullness grouping, new compaction algorithm
N Min Max Median Avg Stddev
x 140 349 3513 2461 2314.1214 806.03271
+ 140 289 2778 2006 1878.1714 641.02073
Difference at 95.0% confidence
-435.95 +/- 170.595
-18.8387% +/- 7.37193%
(Student's t, pooled s = 728.216)
x Old fullness grouping, old compaction algorithm
+ New fullness grouping, new compaction algorithm
N Min Max Median Avg Stddev
x 140 349 3513 2461 2314.1214 806.03271
+ 140 226 2279 1644 1528.4143 524.85268
Difference at 95.0% confidence
-785.707 +/- 159.331
-33.9527% +/- 6.88516%
(Student's t, pooled s = 680.132)
Link: https://lkml.kernel.org/r/20230304034835.2082479-4-senozhatsky@chromium.org
Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Acked-by: Minchan Kim <minchan@kernel.org>
Cc: Yosry Ahmed <yosryahmed@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Each zspage maintains ->inuse counter which keeps track of the number of
objects stored in the zspage. The ->inuse counter also determines the
zspage's "fullness group" which is calculated as the ratio of the "inuse"
objects to the total number of objects the zspage can hold
(objs_per_zspage). The closer the ->inuse counter is to objs_per_zspage,
the better.
Each size class maintains several fullness lists, that keep track of
zspages of particular "fullness". Pages within each fullness list are
stored in random order with regard to the ->inuse counter. This is
because sorting the zspages by ->inuse counter each time obj_malloc() or
obj_free() is called would be too expensive. However, the ->inuse counter
is still a crucial factor in many situations.
For the two major zsmalloc operations, zs_malloc() and zs_compact(), we
typically select the head zspage from the corresponding fullness list as
the best candidate zspage. However, this assumption is not always
accurate.
For the zs_malloc() operation, the optimal candidate zspage should have
the highest ->inuse counter. This is because the goal is to maximize the
number of ZS_FULL zspages and make full use of all allocated memory.
For the zs_compact() operation, the optimal source zspage should have the
lowest ->inuse counter. This is because compaction needs to move objects
in use to another page before it can release the zspage and return its
physical pages to the buddy allocator. The fewer objects in use, the
quicker compaction can release the zspage. Additionally, compaction is
measured by the number of pages it releases.
This patch reworks the fullness grouping mechanism. Instead of having two
groups - ZS_ALMOST_EMPTY (usage ratio below 3/4) and ZS_ALMOST_FULL (usage
ration above 3/4) - that result in too many zspages being included in the
ALMOST_EMPTY group for specific classes, size classes maintain a larger
number of fullness lists that give strict guarantees on the minimum and
maximum ->inuse values within each group. Each group represents a 10%
change in the ->inuse ratio compared to neighboring groups. In essence,
there are groups for zspages with 0%, 10%, 20% usage ratios, and so on, up
to 100%.
This enhances the selection of candidate zspages for both zs_malloc() and
zs_compact(). A printout of the ->inuse counters of the first 7 zspages
per (random) class fullness group:
class-768 objs_per_zspage 16:
fullness 100%: empty
fullness 99%: empty
fullness 90%: empty
fullness 80%: empty
fullness 70%: empty
fullness 60%: 8 8 9 9 8 8 8
fullness 50%: empty
fullness 40%: 5 5 6 5 5 5 5
fullness 30%: 4 4 4 4 4 4 4
fullness 20%: 2 3 2 3 3 2 2
fullness 10%: 1 1 1 1 1 1 1
fullness 0%: empty
The zs_malloc() function searches through the groups of pages starting
with the one having the highest usage ratio. This means that it always
selects a zspage from the group with the least internal fragmentation
(highest usage ratio) and makes it even less fragmented by increasing its
usage ratio.
The zs_compact() function, on the other hand, begins by scanning the group
with the highest fragmentation (lowest usage ratio) to locate the source
page. The first available zspage is selected, and then the function moves
downward to find a destination zspage in the group with the lowest
internal fragmentation (highest usage ratio).
Link: https://lkml.kernel.org/r/20230304034835.2082479-3-senozhatsky@chromium.org
Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Acked-by: Minchan Kim <minchan@kernel.org>
Cc: Yosry Ahmed <yosryahmed@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "zsmalloc: fine-grained fullness and new compaction
algorithm", v4.
Existing zsmalloc page fullness grouping leads to suboptimal page
selection for both zs_malloc() and zs_compact(). This patchset reworks
zsmalloc fullness grouping/classification.
Additinally it also implements new compaction algorithm that is expected
to use less CPU-cycles (as it potentially does fewer memcpy-s in
zs_object_copy()).
Test (synthetic) results can be seen in patch 0003.
This patch (of 4):
This optimization has no effect. It only ensures that when a zspage was
added to its corresponding fullness list, its "inuse" counter was higher
or lower than the "inuse" counter of the zspage at the head of the list.
The intention was to keep busy zspages at the head, so they could be
filled up and moved to the ZS_FULL fullness group more quickly. However,
this doesn't work as the "inuse" counter of a zspage can be modified by
obj_free() but the zspage may still belong to the same fullness list. So,
fix_fullness_group() won't change the zspage's position in relation to the
head's "inuse" counter, leading to a largely random order of zspages
within the fullness list.
For instance, consider a printout of the "inuse" counters of the first 10
zspages in a class that holds 93 objects per zspage:
ZS_ALMOST_EMPTY: 36 67 68 64 35 54 63 52
As we can see the zspage with the lowest "inuse" counter
is actually the head of the fullness list.
Remove this pointless "optimisation".
Link: https://lkml.kernel.org/r/20230304034835.2082479-1-senozhatsky@chromium.org
Link: https://lkml.kernel.org/r/20230304034835.2082479-2-senozhatsky@chromium.org
Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Acked-by: Minchan Kim <minchan@kernel.org>
Cc: Yosry Ahmed <yosryahmed@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Using order 4 pages would be helpful for IOMMUs mapping, but trying to get
order 4 pages could spend quite much time in the page allocation. From
the perspective of responsiveness, the deterministic memory allocation
speed, I think, is quite important.
The order 4 allocation with __GFP_RECLAIM may spend much time in reclaim
and compation logic. __GFP_NORETRY also may affect. These cause
unpredictable delay.
To get reasonable allocation speed from dma-buf system heap, use
HIGH_ORDER_GFP for order 4 to avoid reclaim. And let me remove
meaningless __GFP_COMP for order 0.
According to my tests, order 4 with MID_ORDER_GFP could get more number
of order 4 pages but the elapsed times could be very slow.
time order 8 order 4 order 0
584 usec 0 160 0
28,428 usec 0 160 0
100,701 usec 0 160 0
76,645 usec 0 160 0
25,522 usec 0 160 0
38,798 usec 0 160 0
89,012 usec 0 160 0
23,015 usec 0 160 0
73,360 usec 0 160 0
76,953 usec 0 160 0
31,492 usec 0 160 0
75,889 usec 0 160 0
84,551 usec 0 160 0
84,352 usec 0 160 0
57,103 usec 0 160 0
93,452 usec 0 160 0
If HIGH_ORDER_GFP is used for order 4, the number of order 4 could be
decreased but the elapsed time results were quite stable and fast enough.
time order 8 order 4 order 0
1,356 usec 0 155 80
1,901 usec 0 11 2384
1,912 usec 0 0 2560
1,911 usec 0 0 2560
1,884 usec 0 0 2560
1,577 usec 0 0 2560
1,366 usec 0 0 2560
1,711 usec 0 0 2560
1,635 usec 0 28 2112
544 usec 10 0 0
633 usec 2 128 0
848 usec 0 160 0
729 usec 0 160 0
1,000 usec 0 160 0
1,358 usec 0 160 0
2,638 usec 0 31 2064
Link: https://lkml.kernel.org/r/20230303050332.10138-1-jaewon31.kim@samsung.com
Signed-off-by: Jaewon Kim <jaewon31.kim@samsung.com>
Reviewed-by: John Stultz <jstultz@google.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: T.J. Mercier <tjmercier@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
KMSAN must see as many memory accesses as possible to prevent false
positive reports. Fall back to versions of
memset16()/memset32()/memset64() implemented in lib/string.c instead of
those written in assembly.
Link: https://lkml.kernel.org/r/20230303141433.3422671-3-glider@google.com
Signed-off-by: Alexander Potapenko <glider@google.com>
Suggested-by: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Reviewed-by: Marco Elver <elver@google.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Helge Deller <deller@gmx.de>
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
commit 5478afc55a ("kmsan: fix memcpy tests") uses OPTIMIZER_HIDE_VAR()
to hide the uninitialized var from the compiler optimizations.
However OPTIMIZER_HIDE_VAR(uninit) enforces an immediate check of @uninit,
so memcpy tests did not actually check the behavior of memcpy(), because
they always contained a KMSAN report.
Replace OPTIMIZER_HIDE_VAR() with a file-local macro that just clobbers
the memory with a barrier(), and add a test case for memcpy() that does
not expect an error report.
Also reflow kmsan_test.c with clang-format.
Link: https://lkml.kernel.org/r/20230303141433.3422671-2-glider@google.com
Signed-off-by: Alexander Potapenko <glider@google.com>
Reviewed-by: Marco Elver <elver@google.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Helge Deller <deller@gmx.de>
Cc: Kees Cook <keescook@chromium.org>
Cc: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
clang -fsanitize=kernel-memory already replaces calls to
memset/memcpy/memmove and their __builtin_ versions with
__msan_memset/__msan_memcpy/__msan_memmove in instrumented files, so
there is no need to override them.
In non-instrumented versions we are now required to leave memset() and
friends intact, so we cannot replace them with __msan_XXX() functions.
Link: https://lkml.kernel.org/r/20230303141433.3422671-1-glider@google.com
Signed-off-by: Alexander Potapenko <glider@google.com>
Suggested-by: Marco Elver <elver@google.com>
Reviewed-by: Marco Elver <elver@google.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Helge Deller <deller@gmx.de>
Cc: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Explicit memcg uncharging is not needed when the memcg accounting has the
same lifespan of the page/folio. That becomes the case for khugepaged
after Yang & Zach's recent rework so the hpage will be allocated for each
collapse rather than being cached.
Cleanup the explicit memcg uncharge in khugepaged failure path and leave
that for put_page().
Link: https://lkml.kernel.org/r/20230303151218.311015-1-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Suggested-by: Zach O'Keefe <zokeefe@google.com>
Reviewed-by: Zach O'Keefe <zokeefe@google.com>
Reviewed-by: Yang Shi <shy828301@gmail.com>
Cc: David Stevens <stevensd@chromium.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Since the following commit arch_make_huge_pte() should be used directly in
generic memory subsystem as a platform provided page table helper, instead
of pte_mkhuge(). Change hugetlb_basic_tests() to call
arch_make_huge_pte() directly, and update its relevant documentation entry
as required.
'commit 16785bd774 ("mm: merge pte_mkhuge() call into arch_make_huge_pte()")'
Link: https://lkml.kernel.org/r/20230302114845.421674-1-anshuman.khandual@arm.com
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Reported-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://lore.kernel.org/all/1ea45095-0926-a56a-a273-816709e9075e@csgroup.eu/
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: David Hildenbrand <david@redhat.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport <rppt@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
