The tcp_reflect_tos option was introduced in Linux 5.10 but was still
undocumented.
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since commit 1033990ac5 ("sctp: implement memory accounting on tx path"),
SCTP has supported memory accounting on tx path where 'sctp_wmem' is used
by sk_wmem_schedule(). So we should fix the description for this option in
ip-sysctl.rst accordingly.
v1->v2:
- Improve the description as Marcelo suggested.
Fixes: 1033990ac5 ("sctp: implement memory accounting on tx path")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds a third knob, '2', which extends the
accept_untracked_na option to learn a neighbor only if the src ip is
in the same subnet as an address configured on the interface that
received the neighbor advertisement. This is similar to the arp_accept
configuration for ipv4.
Signed-off-by: Jaehee Park <jhpark1013@gmail.com>
Suggested-by: Roopa Prabhu <roopa@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In many deployments, we want the option to not learn a neighbor from
garp if the src ip is not in the same subnet as an address configured
on the interface that received the garp message. net.ipv4.arp_accept
sysctl is currently used to control creation of a neigh from a
received garp packet. This patch adds a new option '2' to
net.ipv4.arp_accept which extends option '1' by including the subnet
check.
Signed-off-by: Jaehee Park <jhpark1013@gmail.com>
Suggested-by: Roopa Prabhu <roopa@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
While reading sysctl_ip_dynaddr, it can be changed concurrently.
Thus, we need to add READ_ONCE() to its readers.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
While reading cipso sysctl variables, they can be changed concurrently.
So, we need to add READ_ONCE() to avoid data-races.
Fixes: 446fda4f26 ("[NetLabel]: CIPSOv4 engine")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Acked-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
commit ed6cd6a178 ("net, neigh: Set lower cap for neigh_managed_work rearming")
fixed a case when DELAY_PROBE_TIME is configured to 0, the processing of the
system work queue hog CPU to 100%, and further more we should introduce
a new option used by periodic probe
Signed-off-by: Yuwei Wang <wangyuweihx@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Describe it in networking/ip-sysctl.rst like other SCTP options.
Fixes: 2f5268a924 ("sctp: allow users to set netns ecn flag with sysctl")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Describe it in networking/ip-sysctl.rst like other SCTP options.
We need to document this especially as when using the feature
of User Message Interleaving, some socket options also needs
to be set.
Fixes: 463118c34a ("sctp: support sysctl to allow users to use stream interleave")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Describe it in networking/ip-sysctl.rst like other SCTP options.
Fixes: c0d8bab6ae ("sctp: add get and set sockopt for reconf_enable")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
RFC 9131 changes default behaviour of handling RX of NA messages when the
corresponding entry is absent in the neighbour cache. The current
implementation is limited to accept just unsolicited NAs. However, the
RFC is more generic where it also accepts solicited NAs. Both types
should result in adding a STALE entry for this case.
Expand accept_untracked_na behaviour to also accept solicited NAs to
be compliant with the RFC and rename the sysctl knob to
accept_untracked_na.
Fixes: f9a2fb7331 ("net/ipv6: Introduce accept_unsolicited_na knob to implement router-side changes for RFC9131")
Signed-off-by: Arun Ajith S <aajith@arista.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20220530101414.65439-1-aajith@arista.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Let's describe this sysctl.
Fixes: 5cbf777cfd ("route: add support for directed broadcast forwarding")
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a new neighbour cache entry in STALE state for routers on receiving
an unsolicited (gratuitous) neighbour advertisement with
target link-layer-address option specified.
This is similar to the arp_accept configuration for IPv4.
A new sysctl endpoint is created to turn on this behaviour:
/proc/sys/net/ipv6/conf/interface/accept_unsolicited_na.
Signed-off-by: Arun Ajith S <aajith@arista.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Back when tcp_tso_autosize() and TCP pacing were introduced,
our focus was really to reduce burst sizes for long distance
flows.
The simple heuristic of using sk_pacing_rate/1024 has worked
well, but can lead to too small packets for hosts in the same
rack/cluster, when thousands of flows compete for the bottleneck.
Neal Cardwell had the idea of making the TSO burst size
a function of both sk_pacing_rate and tcp_min_rtt()
Indeed, for local flows, sending bigger bursts is better
to reduce cpu costs, as occasional losses can be repaired
quite fast.
This patch is based on Neal Cardwell implementation
done more than two years ago.
bbr is adjusting max_pacing_rate based on measured bandwidth,
while cubic would over estimate max_pacing_rate.
/proc/sys/net/ipv4/tcp_tso_rtt_log can be used to tune or disable
this new feature, in logarithmic steps.
Tested:
100Gbit NIC, two hosts in the same rack, 4K MTU.
600 flows rate-limited to 20000000 bytes per second.
Before patch: (TSO sizes would be limited to 20000000/1024/4096 -> 4 segments per TSO)
~# echo 0 >/proc/sys/net/ipv4/tcp_tso_rtt_log
~# nstat -n;perf stat ./super_netperf 600 -H otrv6 -l 20 -- -K dctcp -q 20000000;nstat|egrep "TcpInSegs|TcpOutSegs|TcpRetransSegs|Delivered"
96005
Performance counter stats for './super_netperf 600 -H otrv6 -l 20 -- -K dctcp -q 20000000':
65,945.29 msec task-clock # 2.845 CPUs utilized
1,314,632 context-switches # 19935.279 M/sec
5,292 cpu-migrations # 80.249 M/sec
940,641 page-faults # 14264.023 M/sec
201,117,030,926 cycles # 3049769.216 GHz (83.45%)
17,699,435,405 stalled-cycles-frontend # 8.80% frontend cycles idle (83.48%)
136,584,015,071 stalled-cycles-backend # 67.91% backend cycles idle (83.44%)
53,809,530,436 instructions # 0.27 insn per cycle
# 2.54 stalled cycles per insn (83.36%)
9,062,315,523 branches # 137422329.563 M/sec (83.22%)
153,008,621 branch-misses # 1.69% of all branches (83.32%)
23.182970846 seconds time elapsed
TcpInSegs 15648792 0.0
TcpOutSegs 58659110 0.0 # Average of 3.7 4K segments per TSO packet
TcpExtTCPDelivered 58654791 0.0
TcpExtTCPDeliveredCE 19 0.0
After patch:
~# echo 9 >/proc/sys/net/ipv4/tcp_tso_rtt_log
~# nstat -n;perf stat ./super_netperf 600 -H otrv6 -l 20 -- -K dctcp -q 20000000;nstat|egrep "TcpInSegs|TcpOutSegs|TcpRetransSegs|Delivered"
96046
Performance counter stats for './super_netperf 600 -H otrv6 -l 20 -- -K dctcp -q 20000000':
48,982.58 msec task-clock # 2.104 CPUs utilized
186,014 context-switches # 3797.599 M/sec
3,109 cpu-migrations # 63.472 M/sec
941,180 page-faults # 19214.814 M/sec
153,459,763,868 cycles # 3132982.807 GHz (83.56%)
12,069,861,356 stalled-cycles-frontend # 7.87% frontend cycles idle (83.32%)
120,485,917,953 stalled-cycles-backend # 78.51% backend cycles idle (83.24%)
36,803,672,106 instructions # 0.24 insn per cycle
# 3.27 stalled cycles per insn (83.18%)
5,947,266,275 branches # 121417383.427 M/sec (83.64%)
87,984,616 branch-misses # 1.48% of all branches (83.43%)
23.281200256 seconds time elapsed
TcpInSegs 1434706 0.0
TcpOutSegs 58883378 0.0 # Average of 41 4K segments per TSO packet
TcpExtTCPDelivered 58878971 0.0
TcpExtTCPDeliveredCE 9664 0.0
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Neal Cardwell <ncardwell@google.com>
Link: https://lore.kernel.org/r/20220309015757.2532973-1-eric.dumazet@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The updating way of pmtu has changed, but documentation is still in the
old way. So this patch updates the interpretation of ip_no_pmtu_disc and
min_pmtu.
See commit 28d35bcdd3 ("net: ipv4: don't let PMTU updates increase
route MTU")
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: xu xin <xu.xin16@zte.com.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
udp_mem is a vector of 3 INTEGERs, which is used to limit the number of
pages allowed for queueing by all UDP sockets.
However, sk_has_memory_pressure() in __sk_mem_raise_allocated() always
return false for udp, as memory pressure is not supported by udp, which
means that __sk_mem_raise_allocated() will fail once pages allocated
for udp socket exceeds udp_mem[0].
Therefor, udp_mem[0] is the only one that limit the number of pages.
However, the document of udp_mem just express that udp_mem[2] is the
limitation. So, just fix it.
Signed-off-by: Menglong Dong <imagedong@tencent.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In most situations the neighbor discovery cache should be cleared on a
NOCARRIER event which is currently done unconditionally. But for wireless
roams the neighbor discovery cache can and should remain intact since
the underlying network has not changed.
This patch introduces a sysctl option ndisc_evict_nocarrier which can
be disabled by a wireless supplicant during a roam. This allows packets
to be sent after a roam immediately without having to wait for
neighbor discovery.
A user reported roughly a 1 second delay after a roam before packets
could be sent out (note, on IPv4). This delay was due to the ARP
cache being cleared. During testing of this same scenario using IPv6
no delay was noticed, but regardless there is no reason to clear
the ndisc cache for wireless roams.
Signed-off-by: James Prestwood <prestwoj@gmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This change introduces a new sysctl parameter, arp_evict_nocarrier.
When set (default) the ARP cache will be cleared on a NOCARRIER event.
This new option has been defaulted to '1' which maintains existing
behavior.
Clearing the ARP cache on NOCARRIER is relatively new, introduced by:
commit 859bd2ef1f
Author: David Ahern <dsahern@gmail.com>
Date: Thu Oct 11 20:33:49 2018 -0700
net: Evict neighbor entries on carrier down
The reason for this changes is to prevent the ARP cache from being
cleared when a wireless device roams. Specifically for wireless roams
the ARP cache should not be cleared because the underlying network has not
changed. Clearing the ARP cache in this case can introduce significant
delays sending out packets after a roam.
A user reported such a situation here:
https://lore.kernel.org/linux-wireless/CACsRnHWa47zpx3D1oDq9JYnZWniS8yBwW1h0WAVZ6vrbwL_S0w@mail.gmail.com/
After some investigation it was found that the kernel was holding onto
packets until ARP finished which resulted in this 1 second delay. It
was also found that the first ARP who-has was never responded to,
which is actually what caues the delay. This change is more or less
working around this behavior, but again, there is no reason to clear
the cache on a roam anyways.
As for the unanswered who-has, we know the packet made it OTA since
it was seen while monitoring. Why it never received a response is
unknown. In any case, since this is a problem on the AP side of things
all that can be done is to work around it until it is solved.
Some background on testing/reproducing the packet delay:
Hardware:
- 2 access points configured for Fast BSS Transition (Though I don't
see why regular reassociation wouldn't have the same behavior)
- Wireless station running IWD as supplicant
- A device on network able to respond to pings (I used one of the APs)
Procedure:
- Connect to first AP
- Ping once to establish an ARP entry
- Start a tcpdump
- Roam to second AP
- Wait for operstate UP event, and note the timestamp
- Start pinging
Results:
Below is the tcpdump after UP. It was recorded the interface went UP at
10:42:01.432875.
10:42:01.461871 ARP, Request who-has 192.168.254.1 tell 192.168.254.71, length 28
10:42:02.497976 ARP, Request who-has 192.168.254.1 tell 192.168.254.71, length 28
10:42:02.507162 ARP, Reply 192.168.254.1 is-at ac:86:74:55:b0:20, length 46
10:42:02.507185 IP 192.168.254.71 > 192.168.254.1: ICMP echo request, id 52792, seq 1, length 64
10:42:02.507205 IP 192.168.254.71 > 192.168.254.1: ICMP echo request, id 52792, seq 2, length 64
10:42:02.507212 IP 192.168.254.71 > 192.168.254.1: ICMP echo request, id 52792, seq 3, length 64
10:42:02.507219 IP 192.168.254.71 > 192.168.254.1: ICMP echo request, id 52792, seq 4, length 64
10:42:02.507225 IP 192.168.254.71 > 192.168.254.1: ICMP echo request, id 52792, seq 5, length 64
10:42:02.507232 IP 192.168.254.71 > 192.168.254.1: ICMP echo request, id 52792, seq 6, length 64
10:42:02.515373 IP 192.168.254.1 > 192.168.254.71: ICMP echo reply, id 52792, seq 1, length 64
10:42:02.521399 IP 192.168.254.1 > 192.168.254.71: ICMP echo reply, id 52792, seq 2, length 64
10:42:02.521612 IP 192.168.254.1 > 192.168.254.71: ICMP echo reply, id 52792, seq 3, length 64
10:42:02.521941 IP 192.168.254.1 > 192.168.254.71: ICMP echo reply, id 52792, seq 4, length 64
10:42:02.522419 IP 192.168.254.1 > 192.168.254.71: ICMP echo reply, id 52792, seq 5, length 64
10:42:02.523085 IP 192.168.254.1 > 192.168.254.71: ICMP echo reply, id 52792, seq 6, length 64
You can see the first ARP who-has went out very quickly after UP, but
was never responded to. Nearly a second later the kernel retries and
gets a response. Only then do the ping packets go out. If an ARP entry
is manually added prior to UP (after the cache is cleared) it is seen
that the first ping is never responded to, so its not only an issue with
ARP but with data packets in general.
As mentioned prior, the wireless interface was also monitored to verify
the ping/ARP packet made it OTA which was observed to be true.
Signed-off-by: James Prestwood <prestwoj@gmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This reverts the following patches :
- commit 2e05fcae83 ("tcp: fix compile error if !CONFIG_SYSCTL")
- commit 4f661542a4 ("tcp: fix zerocopy and notsent_lowat issues")
- commit 472c2e07ee ("tcp: add one skb cache for tx")
- commit 8b27dae5a2 ("tcp: add one skb cache for rx")
Having a cache of one skb (in each direction) per TCP socket is fragile,
since it can cause a significant increase of memory needs,
and not good enough for high speed flows anyway where more than one skb
is needed.
We want instead to add a generic infrastructure, with more flexible
per-cpu caches, for alien NUMA nodes.
Acked-by: Paolo Abeni <pabeni@redhat.com>
Acked-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Multiple complaints have been raised from the TFO users on the internet
stating that the TFO blackhole logic is too aggressive and gets falsely
triggered too often.
(e.g. https://blog.apnic.net/2021/07/05/tcp-fast-open-not-so-fast/)
Considering that most middleboxes no longer drop TFO packets, we decide
to disable the blackhole logic by setting
/proc/sys/net/ipv4/tcp_fastopen_blackhole_timeout_set to 0 by default.
Fixes: cf1ef3f071 ("net/tcp_fastopen: Disable active side TFO in certain scenarios")
Signed-off-by: Wei Wang <weiwan@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Acked-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add documentation for new IOAM sysctls:
- ioam6_id and ioam6_id_wide: two per-namespace sysctls
- ioam6_enabled, ioam6_id and ioam6_id_wide: three per-interface sysctls
Example of IOAM configuration based on the following simple topology:
_____ _____ _____
| | eth0 eth0 | | eth1 eth0 | |
| A |.----------.| B |.----------.| C |
|_____| |_____| |_____|
1) Node and interface IDs can be configured for IOAM:
# IOAM ID of A = 1, IOAM ID of A.eth0 = 11
(A) sysctl -w net.ipv6.ioam6_id=1
(A) sysctl -w net.ipv6.conf.eth0.ioam6_id=11
# IOAM ID of B = 2, IOAM ID of B.eth0 = 21, IOAM ID of B.eth1 = 22
(B) sysctl -w net.ipv6.ioam6_id=2
(B) sysctl -w net.ipv6.conf.eth0.ioam6_id=21
(B) sysctl -w net.ipv6.conf.eth1.ioam6_id=22
# IOAM ID of C = 3, IOAM ID of C.eth0 = 31
(C) sysctl -w net.ipv6.ioam6_id=3
(C) sysctl -w net.ipv6.conf.eth0.ioam6_id=31
Note that "_wide" IDs equivalents can be configured the same way.
2) Each node can be configured to form an IOAM domain. For instance,
we allow IOAM from A to C only (not the reverse path), i.e. enable
IOAM on ingress for B.eth0 and C.eth0:
(B) sysctl -w net.ipv6.conf.eth0.ioam6_enabled=1
(C) sysctl -w net.ipv6.conf.eth0.ioam6_enabled=1
3) An IOAM domain (e.g. ID=123) is defined and made known to each node:
(A) ip ioam namespace add 123
(B) ip ioam namespace add 123
(C) ip ioam namespace add 123
4) Finally, an IOAM Pre-allocated Trace can be inserted in traffic sent
by A when C (e.g. db02::2) is the destination:
(A) ip -6 route add db02::2/128 encap ioam6 trace type 0x800000 ns 123
size 12 dev eth0
Signed-off-by: Justin Iurman <justin.iurman@uliege.be>
Signed-off-by: David S. Miller <davem@davemloft.net>
These is no need to wait for 'interval' period for the next probe
if the last probe is already acked in search state. The 'interval'
period waiting should be only for probe failure timeout and the
current pmtu check when it's in search complete state.
This change will shorten the probe time a lot in search state, and
also fix the document accordingly.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
PLPMTUD can be enabled by doing 'sysctl -w net.sctp.probe_interval=n'.
'n' is the interval for PLPMTUD probe timer in milliseconds, and it
can't be less than 5000 if it's not 0.
All asoc/transport's PLPMTUD in a new socket will be enabled by default.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This commit adds a new sysctl option: net.ipv4.tcp_migrate_req. If this
option is enabled or eBPF program is attached, we will be able to migrate
child sockets from a listener to another in the same reuseport group after
close() or shutdown() syscalls.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.co.jp>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Benjamin Herrenschmidt <benh@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20210612123224.12525-2-kuniyu@amazon.co.jp
Add a new multipath hash policy where the packet fields used for hash
calculation are determined by user space via the
fib_multipath_hash_fields sysctl that was introduced in the previous
patch.
The current set of available packet fields includes both outer and inner
fields, which requires two invocations of the flow dissector. Avoid
unnecessary dissection of the outer or inner flows by skipping
dissection if none of the outer or inner fields are required.
In accordance with the existing policies, when an skb is not available,
packet fields are extracted from the provided flow key. In which case,
only outer fields are considered.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
A subsequent patch will add a new multipath hash policy where the packet
fields used for multipath hash calculation are determined by user space.
This patch adds a sysctl that allows user space to set these fields.
The packet fields are represented using a bitmask and are common between
IPv4 and IPv6 to allow user space to use the same numbering across both
protocols. For example, to hash based on standard 5-tuple:
# sysctl -w net.ipv6.fib_multipath_hash_fields=0x0037
net.ipv6.fib_multipath_hash_fields = 0x0037
To avoid introducing holes in 'struct netns_sysctl_ipv6', move the
'bindv6only' field after the multipath hash fields.
The kernel rejects unknown fields, for example:
# sysctl -w net.ipv6.fib_multipath_hash_fields=0x1000
sysctl: setting key "net.ipv6.fib_multipath_hash_fields": Invalid argument
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a new multipath hash policy where the packet fields used for hash
calculation are determined by user space via the
fib_multipath_hash_fields sysctl that was introduced in the previous
patch.
The current set of available packet fields includes both outer and inner
fields, which requires two invocations of the flow dissector. Avoid
unnecessary dissection of the outer or inner flows by skipping
dissection if none of the outer or inner fields are required.
In accordance with the existing policies, when an skb is not available,
packet fields are extracted from the provided flow key. In which case,
only outer fields are considered.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
A subsequent patch will add a new multipath hash policy where the packet
fields used for multipath hash calculation are determined by user space.
This patch adds a sysctl that allows user space to set these fields.
The packet fields are represented using a bitmask and are common between
IPv4 and IPv6 to allow user space to use the same numbering across both
protocols. For example, to hash based on standard 5-tuple:
# sysctl -w net.ipv4.fib_multipath_hash_fields=0x0037
net.ipv4.fib_multipath_hash_fields = 0x0037
The kernel rejects unknown fields, for example:
# sysctl -w net.ipv4.fib_multipath_hash_fields=0x1000
sysctl: setting key "net.ipv4.fib_multipath_hash_fields": Invalid argument
More fields can be added in the future, if needed.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
- keep the ZC code, drop the code related to reinit
net/bridge/netfilter/ebtables.c
- fix build after move to net_generic
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Let's have all seg6 sysctl at the same place.
Fixes: a6dc6670cd ("ipv6: sr: Add documentation for seg_flowlabel sysctl")
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If there is overlapp between ip_local_port_range and ip_local_reserved_ports with a huge reserved block, it will affect probability of selecting ephemeral ports, see file net/ipv4/inet_hashtables.c:723
int __inet_hash_connect(
...
for (i = 0; i < remaining; i += 2, port += 2) {
if (unlikely(port >= high))
port -= remaining;
if (inet_is_local_reserved_port(net, port))
continue;
E.g. if there is reserved block of 10000 ports, two ports right after this block will be 5000 more likely selected than others.
If this was intended, we can/should add note into documentation as proposed in this commit, otherwise we should think about different solution. One option could be mapping table of continuous port ranges. Second option could be letting user to modify step (port+=2) in above loop, e.g. using new sysctl parameter.
Signed-off-by: Otto Hollmann <otto.hollmann@suse.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Section 8 of RFC 8335 specifies potential security concerns of
responding to PROBE requests, and states that nodes that support PROBE
functionality MUST be able to enable/disable responses and that
responses MUST be disabled by default
Signed-off-by: Andreas Roeseler <andreas.a.roeseler@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
tcp_rmem[1] has been changed to 131072, we should update the documentation
to reflect this.
Fixes: a337531b94 ("tcp: up initial rmem to 128KB and SYN rwin to around 64KB")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Zhibin Liu <zhibinliu@google.com>
Cc: Yuchung Cheng <ycheng@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Provide documentation for src_valid_mark sysctl, which was added
in commit 28f6aeea3f ("net: restore ip source validation").
Signed-off-by: Jay Vosburgh <jay.vosburgh@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add the value '2' to 'fib_notify_on_flag_change' to allow sending
notifications only for failed route installation.
Separate value is added for such notifications because there are less of
them, so they do not impact performance and some users will find them more
important.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add the value '2' to 'fib_notify_on_flag_change' to allow sending
notifications only for failed route installation.
Separate value is added for such notifications because there are less of
them, so they do not impact performance and some users will find them more
important.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
After installing a route to the kernel, user space receives an
acknowledgment, which means the route was installed in the kernel,
but not necessarily in hardware.
The asynchronous nature of route installation in hardware can lead
to a routing daemon advertising a route before it was actually installed in
hardware. This can result in packet loss or mis-routed packets until the
route is installed in hardware.
It is also possible for a route already installed in hardware to change
its action and therefore its flags. For example, a host route that is
trapping packets can be "promoted" to perform decapsulation following
the installation of an IPinIP/VXLAN tunnel.
Emit RTM_NEWROUTE notifications whenever RTM_F_OFFLOAD/RTM_F_TRAP flags
are changed. The aim is to provide an indication to user-space
(e.g., routing daemons) about the state of the route in hardware.
Introduce a sysctl that controls this behavior.
Keep the default value at 0 (i.e., do not emit notifications) for several
reasons:
- Multiple RTM_NEWROUTE notification per-route might confuse existing
routing daemons.
- Convergence reasons in routing daemons.
- The extra notifications will negatively impact the insertion rate.
- Not all users are interested in these notifications.
Move fib6_info_hw_flags_set() to C file because it is no longer a short
function.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
After installing a route to the kernel, user space receives an
acknowledgment, which means the route was installed in the kernel,
but not necessarily in hardware.
The asynchronous nature of route installation in hardware can lead to a
routing daemon advertising a route before it was actually installed in
hardware. This can result in packet loss or mis-routed packets until the
route is installed in hardware.
It is also possible for a route already installed in hardware to change
its action and therefore its flags. For example, a host route that is
trapping packets can be "promoted" to perform decapsulation following
the installation of an IPinIP/VXLAN tunnel.
Emit RTM_NEWROUTE notifications whenever RTM_F_OFFLOAD/RTM_F_TRAP flags
are changed. The aim is to provide an indication to user-space
(e.g., routing daemons) about the state of the route in hardware.
Introduce a sysctl that controls this behavior.
Keep the default value at 0 (i.e., do not emit notifications) for several
reasons:
- Multiple RTM_NEWROUTE notification per-route might confuse existing
routing daemons.
- Convergence reasons in routing daemons.
- The extra notifications will negatively impact the insertion rate.
- Not all users are interested in these notifications.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Acked-by: Roopa Prabhu <roopa@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
drivers/net/can/dev.c
b552766c87 ("can: dev: prevent potential information leak in can_fill_info()")
3e77f70e73 ("can: dev: move driver related infrastructure into separate subdir")
0a042c6ec9 ("can: dev: move netlink related code into seperate file")
Code move.
drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c
57ac4a31c4 ("net/mlx5e: Correctly handle changing the number of queues when the interface is down")
214baf2287 ("net/mlx5e: Support HTB offload")
Adjacent code changes
net/switchdev/switchdev.c
20776b465c ("net: switchdev: don't set port_obj_info->handled true when -EOPNOTSUPP")
ffb68fc58e ("net: switchdev: remove the transaction structure from port object notifiers")
bae33f2b5a ("net: switchdev: remove the transaction structure from port attributes")
Transaction parameter gets dropped otherwise keep the fix.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
For IPv4, default route is learned via DHCPv4 and user is allowed to change
metric using config etc/network/interfaces. But for IPv6, default route can
be learned via RA, for which, currently a fixed metric value 1024 is used.
Ideally, user should be able to configure metric on default route for IPv6
similar to IPv4. This patch adds sysctl for the same.
Logs:
For IPv4:
Config in etc/network/interfaces:
auto eth0
iface eth0 inet dhcp
metric 4261413864
IPv4 Kernel Route Table:
$ ip route list
default via 172.21.47.1 dev eth0 metric 4261413864
FRR Table, if a static route is configured:
[In real scenario, it is useful to prefer BGP learned default route over DHCPv4 default route.]
Codes: K - kernel route, C - connected, S - static, R - RIP,
O - OSPF, I - IS-IS, B - BGP, P - PIM, E - EIGRP, N - NHRP,
T - Table, v - VNC, V - VNC-Direct, A - Babel, D - SHARP,
> - selected route, * - FIB route
S>* 0.0.0.0/0 [20/0] is directly connected, eth0, 00:00:03
K 0.0.0.0/0 [254/1000] via 172.21.47.1, eth0, 6d08h51m
i.e. User can prefer Default Router learned via Routing Protocol in IPv4.
Similar behavior is not possible for IPv6, without this fix.
After fix [for IPv6]:
sudo sysctl -w net.ipv6.conf.eth0.net.ipv6.conf.eth0.ra_defrtr_metric=1996489705
IP monitor: [When IPv6 RA is received]
default via fe80::xx16:xxxx:feb3:ce8e dev eth0 proto ra metric 1996489705 pref high
Kernel IPv6 routing table
$ ip -6 route list
default via fe80::be16:65ff:feb3:ce8e dev eth0 proto ra metric 1996489705 expires 21sec hoplimit 64 pref high
FRR Table, if a static route is configured:
[In real scenario, it is useful to prefer BGP learned default route over IPv6 RA default route.]
Codes: K - kernel route, C - connected, S - static, R - RIPng,
O - OSPFv3, I - IS-IS, B - BGP, N - NHRP, T - Table,
v - VNC, V - VNC-Direct, A - Babel, D - SHARP,
> - selected route, * - FIB route
S>* ::/0 [20/0] is directly connected, eth0, 00:00:06
K ::/0 [119/1001] via fe80::xx16:xxxx:feb3:ce8e, eth0, 6d07h43m
If the metric is changed later, the effect will be seen only when next IPv6
RA is received, because the default route must be fully controlled by RA msg.
Below metric is changed from 1996489705 to 1996489704.
$ sudo sysctl -w net.ipv6.conf.eth0.ra_defrtr_metric=1996489704
net.ipv6.conf.eth0.ra_defrtr_metric = 1996489704
IP monitor:
[On next IPv6 RA msg, Kernel deletes prev route and installs new route with updated metric]
Deleted default via fe80::xx16:xxxx:feb3:ce8e dev eth0 proto ra metric 1996489705 expires 3sec hoplimit 64 pref high
default via fe80::xx16:xxxx:feb3:ce8e dev eth0 proto ra metric 1996489704 pref high
Signed-off-by: Praveen Chaudhary <pchaudhary@linkedin.com>
Signed-off-by: Zhenggen Xu <zxu@linkedin.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20210125214430.24079-1-pchaudhary@linkedin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch adds documentation for sysctl conf/all/disable_ipv6 and
conf/default/disable_ipv6 settings which is currently missing.
Signed-off-by: Pali Rohár <pali@kernel.org>
Link: https://lore.kernel.org/r/20210121150244.20483-1-pali@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
