There's no --signal-trigger option, also adding the code comment into
record man page.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Wang Nan <wangnan0@huawei.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1483431600-19887-4-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
There's no need for this one to be global.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Wang Nan <wangnan0@huawei.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1483431600-19887-3-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Since 'perf probe' supports cross-arch probes, it is possible to analyze
different arch kernel image which has different bits-per-long.
In that case, it fails to get the module name because it uses the
MOD_NAME_OFFSET macro based on the host machine bits-per-long, instead
of the target arch bits-per-long.
This fixes above issue by changing modname-offset based on the target
archs bit width. This is ok because linux kernel uses LP64 model on
64bit arch.
E.g. without this (on x86_64, and target module is arm32):
$ perf probe -m build-arm/fs/configfs/configfs.ko -D configfs_lookup
p:probe/configfs_lookup :configfs_lookup+0
^-Here is an empty module name.
With this fix, you can see correct module name:
$ perf probe -m build-arm/fs/configfs/configfs.ko -D configfs_lookup
p:probe/configfs_lookup configfs:configfs_lookup+0
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/148337043836.6752.383495516397005695.stgit@devbox
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Show length of analyzed sample time and rate of idle task running.
This also takes care of time range given by --time option.
$ perf sched timehist -sI | tail
Samples do not have callchains.
Idle stats:
CPU 0 idle for 930.316 msec ( 92.93%)
CPU 1 idle for 963.614 msec ( 96.25%)
CPU 2 idle for 885.482 msec ( 88.45%)
CPU 3 idle for 938.635 msec ( 93.76%)
Total number of unique tasks: 118
Total number of context switches: 2337
Total run time (msec): 3718.048
Total scheduling time (msec): 1001.131 (x 4)
Suggested-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20161222060350.17655-3-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Pull perf fixes from Ingo Molnar:
"On the kernel side there's two x86 PMU driver fixes and a uprobes fix,
plus on the tooling side there's a number of fixes and some late
updates"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (36 commits)
perf sched timehist: Fix invalid period calculation
perf sched timehist: Remove hardcoded 'comm_width' check at print_summary
perf sched timehist: Enlarge default 'comm_width'
perf sched timehist: Honour 'comm_width' when aligning the headers
perf/x86: Fix overlap counter scheduling bug
perf/x86/pebs: Fix handling of PEBS buffer overflows
samples/bpf: Move open_raw_sock to separate header
samples/bpf: Remove perf_event_open() declaration
samples/bpf: Be consistent with bpf_load_program bpf_insn parameter
tools lib bpf: Add bpf_prog_{attach,detach}
samples/bpf: Switch over to libbpf
perf diff: Do not overwrite valid build id
perf annotate: Don't throw error for zero length symbols
perf bench futex: Fix lock-pi help string
perf trace: Check if MAP_32BIT is defined (again)
samples/bpf: Make perf_event_read() static
uprobes: Fix uprobes on MIPS, allow for a cache flush after ixol breakpoint creation
samples/bpf: Make samples more libbpf-centric
tools lib bpf: Add flags to bpf_create_map()
tools lib bpf: use __u32 from linux/types.h
...
When --time option is given with a value outside recorded time, the last
sample time (tprev) was set to that value and run time calculation might
be incorrect. This is a problem of the first samples for each cpus
since it would skip the runtime update when tprev is 0. But with --time
option it had non-zero (which is invalid) value so the calculation is
also incorrect.
For example, let's see the followging:
$ perf sched timehist
time cpu task name wait time sch delay run time
[tid/pid] (msec) (msec) (msec)
--------------- ------ ------------------------------ --------- --------- ---------
3195.968367 [0003] <idle> 0.000 0.000 0.000
3195.968386 [0002] Timer[4306/4277] 0.000 0.000 0.018
3195.968397 [0002] Web Content[4277] 0.000 0.000 0.000
3195.968595 [0001] JS Helper[4302/4277] 0.000 0.000 0.000
3195.969217 [0000] <idle> 0.000 0.000 0.621
3195.969251 [0001] kworker/1:1H[291] 0.000 0.000 0.033
The sample starts at 3195.968367 but when I gave a time interval from
3194 to 3196 (in sec) it will calculate the whole 2 second as runtime.
In below, 2 cpus accounted it as runtime, other 2 cpus accounted it as
idle time.
Before:
$ perf sched timehist --time 3194,3196 -s | tail
Idle stats:
CPU 0 idle for 1995.991 msec
CPU 1 idle for 20.793 msec
CPU 2 idle for 30.191 msec
CPU 3 idle for 1999.852 msec
Total number of unique tasks: 23
Total number of context switches: 128
Total run time (msec): 3724.940
After:
$ perf sched timehist --time 3194,3196 -s | tail
Idle stats:
CPU 0 idle for 10.811 msec
CPU 1 idle for 20.793 msec
CPU 2 idle for 30.191 msec
CPU 3 idle for 18.337 msec
Total number of unique tasks: 23
Total number of context switches: 128
Total run time (msec): 18.139
Committer notes:
Further testing:
Before:
Idle stats:
CPU 0 idle for 229.785 msec
CPU 1 idle for 937.944 msec
CPU 2 idle for 188.931 msec
CPU 3 idle for 986.185 msec
After:
# perf sched timehist --time 40602,40603 -s | tail
Idle stats:
CPU 0 idle for 229.785 msec
CPU 1 idle for 175.407 msec
CPU 2 idle for 188.931 msec
CPU 3 idle for 223.657 msec
Total number of unique tasks: 68
Total number of context switches: 814
Total run time (msec): 97.688
# for cpu in `seq 0 3` ; do echo -n "CPU $cpu idle for " ; perf sched timehist --time 40602,40603 | grep "\[000${cpu}\].*\<idle\>" | tr -s ' ' | cut -d' ' -f7 | awk '{entries++ ; s+=$1} END {print s " msec (entries: " entries ")"}' ; done
CPU 0 idle for 229.721 msec (entries: 123)
CPU 1 idle for 175.381 msec (entries: 65)
CPU 2 idle for 188.903 msec (entries: 56)
CPU 3 idle for 223.61 msec (entries: 102)
Difference due to the idle stats being accounted at nanoseconds precision while
the <idle> entries in 'perf sched timehist' are trucated at msec.usec.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Fixes: 853b740711 ("perf sched timehist: Add option to specify time window of interest")
Link: http://lkml.kernel.org/r/20161222060350.17655-2-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Now that the default 'comm_width' value is 30, no need to check that at
print_summary,
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20161222060350.17655-1-namhyung@kernel.org
[ Split from a larger patch ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Current default value is 20 but it's easily changed to a bigger value as
task has a long name and different tid and pid. And it makes the output
not aligned. So change it to have a large value as summary shows.
Committer notes:
Before:
# perf sched record
^C
# perf sched timehist
<SNIP>
40602.770537 [0001] rcuos/2[29] 7.970 0.002 0.020
40602.771512 [0003] <idle> 0.003 0.000 0.986
40602.771586 [0001] <idle> 0.020 0.000 1.049
40602.771606 [0001] qemu-system-x86[3593/3510] 0.000 0.002 0.020
40602.771629 [0003] qemu-system-x86[3510] 0.000 0.003 0.116
40602.771776 [0000] <idle> 0.001 0.000 1.892
<SNIP>
After:
# perf sched timehist
<SNIP>
40602.770537 [0001] rcuos/2[29] 7.970 0.002 0.020
40602.771512 [0003] <idle> 0.003 0.000 0.986
40602.771586 [0001] <idle> 0.020 0.000 1.049
40602.771606 [0001] qemu-system-x86[3593/3510] 0.000 0.002 0.020
40602.771629 [0003] qemu-system-x86[3510] 0.000 0.003 0.116
<SNIP>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20161222060350.17655-1-namhyung@kernel.org
[ Split from a larger patch ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Current default value is 20, but that may change in the future, so make
places where we have 20 hardcoded use 'comm_width'.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20161222060350.17655-1-namhyung@kernel.org
[ Split from a larger patch ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Fixes a perf diff regression issue which was introduced by commit
5baecbcd9c ("perf symbols: we can now read separate debug-info files
based on a build ID")
The binary name could be same when perf diff different binaries. Build
id is used to distinguish between them.
However, the previous patch assumes the same binary name has same build
id. So it overwrites the build id according to the binary name,
regardless of whether the build id is set or not.
Check the has_build_id in dso__load. If the build id is already set, use
it.
Before the fix:
$ perf diff 1.perf.data 2.perf.data
# Event 'cycles'
#
# Baseline Delta Shared Object Symbol
# ........ ....... ................ .............................
#
99.83% -99.80% tchain_edit [.] f2
0.12% +99.81% tchain_edit [.] f3
0.02% -0.01% [ixgbe] [k] ixgbe_read_reg
After the fix:
$ perf diff 1.perf.data 2.perf.data
# Event 'cycles'
#
# Baseline Delta Shared Object Symbol
# ........ ....... ................ .............................
#
99.83% +0.10% tchain_edit [.] f3
0.12% -0.08% tchain_edit [.] f2
Signed-off-by: Kan Liang <kan.liang@intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
CC: Dima Kogan <dima@secretsauce.net>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Fixes: 5baecbcd9c ("perf symbols: we can now read separate debug-info files based on a build ID")
Link: http://lkml.kernel.org/r/1481642984-13593-1-git-send-email-kan.liang@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
'perf report --tui' exits with error when it finds a sample of zero
length symbol (i.e. addr == sym->start == sym->end). Actually these are
valid samples. Don't exit TUI and show report with such symbols.
Reported-and-Tested-by: Anton Blanchard <anton@samba.org>
Link: https://lkml.org/lkml/2016/10/8/189
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Chris Riyder <chris.ryder@arm.com>
Cc: linuxppc-dev@lists.ozlabs.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: stable@kernel.org # v4.9+
Link: http://lkml.kernel.org/r/1479804050-5028-1-git-send-email-ravi.bangoria@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
There might be systems where MAP_32BIT is not defined, like some some
RHEL7 powerpc versions.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Kyle McMartin <kyle@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Fixes: 256763b017 ("perf trace beauty mmap: Add more conditional defines")
Link: http://lkml.kernel.org/r/1481831814-23683-1-git-send-email-jolsa@kernel.org
[ Changed the Fixme cset to the one removing the conditional switch case for MAP_32BIT ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Pull kbuild updates from Michal Marek:
- prototypes for x86 asm-exported symbols (Adam Borowski) and a warning
about missing CRCs (Nick Piggin)
- asm-exports fix for LTO (Nicolas Pitre)
- thin archives improvements (Nick Piggin)
- linker script fix for CONFIG_LD_DEAD_CODE_DATA_ELIMINATION (Nick
Piggin)
- genksyms support for __builtin_va_list keyword
- misc minor fixes
* 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
x86/kbuild: enable modversions for symbols exported from asm
kbuild: fix scripts/adjust_autoksyms.sh* for the no modules case
scripts/kallsyms: remove last remnants of --page-offset option
make use of make variable CURDIR instead of calling pwd
kbuild: cmd_export_list: tighten the sed script
kbuild: minor improvement for thin archives build
kbuild: modpost warn if export version crc is missing
kbuild: keep data tables through dead code elimination
kbuild: improve linker compatibility with lib-ksyms.o build
genksyms: Regenerate parser
kbuild/genksyms: handle va_list type
kbuild: thin archives for multi-y targets
kbuild: kallsyms allow 3-pass generation if symbols size has changed
If jump target is outside of function range, perf is not handling it
correctly. Especially when target address is lesser than function start
address, target offset will be negative. But, target address declared to
be unsigned, converts negative number into 2's complement. See below
example. Here target of 'jumpq' instruction at 34cf8 is 34ac0 which is
lesser than function start address(34cf0).
34ac0 - 34cf0 = -0x230 = 0xfffffffffffffdd0
Objdump output:
0000000000034cf0 <__sigaction>:
__GI___sigaction():
34cf0: lea -0x20(%rdi),%eax
34cf3: cmp -bashx1,%eax
34cf6: jbe 34d00 <__sigaction+0x10>
34cf8: jmpq 34ac0 <__GI___libc_sigaction>
34cfd: nopl (%rax)
34d00: mov 0x386161(%rip),%rax # 3bae68 <_DYNAMIC+0x2e8>
34d07: movl -bashx16,%fs:(%rax)
34d0e: mov -bashxffffffff,%eax
34d13: retq
perf annotate before applying patch:
__GI___sigaction /usr/lib64/libc-2.22.so
lea -0x20(%rdi),%eax
cmp -bashx1,%eax
v jbe 10
v jmpq fffffffffffffdd0
nop
10: mov _DYNAMIC+0x2e8,%rax
movl -bashx16,%fs:(%rax)
mov -bashxffffffff,%eax
retq
perf annotate after applying patch:
__GI___sigaction /usr/lib64/libc-2.22.so
lea -0x20(%rdi),%eax
cmp -bashx1,%eax
v jbe 10
^ jmpq 34ac0 <__GI___libc_sigaction>
nop
10: mov _DYNAMIC+0x2e8,%rax
movl -bashx16,%fs:(%rax)
mov -bashxffffffff,%eax
retq
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Chris Riyder <chris.ryder@arm.com>
Cc: Kim Phillips <kim.phillips@arm.com>
Cc: Markus Trippelsdorf <markus@trippelsdorf.de>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Taeung Song <treeze.taeung@gmail.com>
Cc: linuxppc-dev@lists.ozlabs.org
Link: http://lkml.kernel.org/r/1480953407-7605-3-git-send-email-ravi.bangoria@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Architectures like PowerPC have jump instructions that includes a target
address as a second operand. For example, 'bne cr7,0xc0000000000f6154'.
Add support for such instruction in perf annotate.
objdump o/p:
c0000000000f6140: ld r9,1032(r31)
c0000000000f6144: cmpdi cr7,r9,0
c0000000000f6148: bne cr7,0xc0000000000f6154
c0000000000f614c: ld r9,2312(r30)
c0000000000f6150: std r9,1032(r31)
c0000000000f6154: ld r9,88(r31)
Corresponding perf annotate o/p:
Before patch:
ld r9,1032(r31)
cmpdi cr7,r9,0
v bne 3ffffffffff09f2c
ld r9,2312(r30)
std r9,1032(r31)
74: ld r9,88(r31)
After patch:
ld r9,1032(r31)
cmpdi cr7,r9,0
v bne 74
ld r9,2312(r30)
std r9,1032(r31)
74: ld r9,88(r31)
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Chris Riyder <chris.ryder@arm.com>
Cc: Kim Phillips <kim.phillips@arm.com>
Cc: Markus Trippelsdorf <markus@trippelsdorf.de>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Taeung Song <treeze.taeung@gmail.com>
Cc: linuxppc-dev@lists.ozlabs.org
Link: http://lkml.kernel.org/r/1480953407-7605-2-git-send-email-ravi.bangoria@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Enable perf_evsel::ignore_missing_thread for -u option to ignore
complete failure if any of the user's processes die between its
enumeration and time we open the event.
Committer notes:
While doing a 'make -j4 allmodconfig' we sometimes get into the race:
Before:
# perf record -u acme
Error:
The sys_perf_event_open() syscall returned with 3 (No such process) for event (cycles:ppp).
/bin/dmesg may provide additional information.
No CONFIG_PERF_EVENTS=y kernel support configured?
#
After:
[root@jouet ~]# perf record -u acme
WARNING: Ignored open failure for pid 9888
WARNING: Ignored open failure for pid 18059
[root@jouet ~]#
Which is an improvement, with the races not preventing the remaining threads
for the specified user from being monitored, but the message probably needs
further clarification.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1481538943-21874-6-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adding perf_evsel::ignore_missing_cpu_thread bool.
When set true, it allows perf to ignore error of missing pid of perf
event syscall.
We remove missing thread id from the thread_map, so the rest of the
processing like ioctl and mmap won't get disturbed with -1 fd.
The reason for supporting this is to ease up monitoring group of pids,
that 'disappear' before perf opens their event. This currently leads
perf to report error and exit and makes perf record's -u option unusable
under certain setup.
With this change we will allow this race and ignore such failure with
following warning:
WARNING: Ignored open failure for pid 8605
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20161213074622.GA3084@krava
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It's more readable and will ease up following patches.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1481538943-21874-3-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
I.e. those parameters/functions _are_ used, so ditch that misleading attribute.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-13cqtjh0yojg5gzvpq1zzpl0@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The --idle-hist option is to analyze system idle state so which process
makes cpu to go idle. If this option is specified, non-idle events will
be skipped and processes switching to/from idle will be shown.
This option is mostly useful when used with --summary(-only) option. In
the idle-time summary view, idle time is accounted to previous thread
which is run before idle task.
The example output looks like following:
Idle-time summary
comm parent sched-out idle-time min-idle avg-idle max-idle stddev migrations
(count) (msec) (msec) (msec) (msec) %
--------------------------------------------------------------------------------------------
rcu_preempt[7] 2 95 550.872 0.011 5.798 23.146 7.63 0
migration/1[16] 2 1 15.558 15.558 15.558 15.558 0.00 0
khugepaged[39] 2 1 3.062 3.062 3.062 3.062 0.00 0
kworker/0:1H[124] 2 2 4.728 0.611 2.364 4.116 74.12 0
systemd-journal[167] 1 1 4.510 4.510 4.510 4.510 0.00 0
kworker/u16:3[558] 2 13 74.737 0.080 5.749 12.960 21.96 0
irq/34-iwlwifi[628] 2 21 118.403 0.032 5.638 23.990 24.00 0
kworker/u17:0[673] 2 1 3.523 3.523 3.523 3.523 0.00 0
dbus-daemon[722] 1 1 6.743 6.743 6.743 6.743 0.00 0
ifplugd[741] 1 1 58.826 58.826 58.826 58.826 0.00 0
wpa_supplicant[1490] 1 1 13.302 13.302 13.302 13.302 0.00 0
wpa_actiond[1492] 1 2 4.064 0.168 2.032 3.896 91.72 0
dockerd[1500] 1 1 0.055 0.055 0.055 0.055 0.00 0
...
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: David Ahern <dsahern@gmail.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20161208144755.16673-6-namhyung@kernel.org
Link: http://lkml.kernel.org/r/20161213080632.19099-2-namhyung@kernel.org
[ Merged fix sent by Namhyumg, as posted in the second Link: tag ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Sometimes it only focuses on idle-related events like upcoming idle-hist
feature. In this case we don't want to see other event to reduce noise.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: David Ahern <dsahern@gmail.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20161208144755.16673-5-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In order to investigate the idleness reason, it is necessary to keep the
callchains when entering idle. This can be identified by the
sched:sched_switch event having the next_pid field as 0.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: David Ahern <dsahern@gmail.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20161208144755.16673-4-namhyung@kernel.org
Link: http://lkml.kernel.org/r/20161213080632.19099-1-namhyung@kernel.org
[ Merged fix from Namhyung, see second Link: tag ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The struct idle_time_data is to keep idle stats with callchains entering
to the idle task. The normal thread_runtime calculation is done
transparently since it extends the struct thread_runtime.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: David Ahern <dsahern@gmail.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20161208144755.16673-3-namhyung@kernel.org
[ Align struct field names ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The is_idle_sample() function actually does more than determining
whether sample come from idle task. Split the callchain part into
save_task_callchain() to make it clearer.
Also checking prev_pid from trace data looks preferred than just
checking sample->pid since it's possible, although rare, to have invalid
0 pid/tid on scheduling an exiting task.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: David Ahern <dsahern@gmail.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20161208144755.16673-2-namhyung@kernel.org
[ Remove some needless () in some return statements ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To make it nicer and easily maintainable.
Also moving the check into fixdep sub make, so its output is not
scattered around the build output.
Removing extra $$ from mman*.h checks.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1481030331-31944-5-git-send-email-jolsa@kernel.org
[ Use /bin/sh, and 'function check() {' -> 'check () {' to make it work with busybox, in Alpine Linux, for instance ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
make already provides the current working directory in a variable, so make
use of it instead of forking a shell. Also replace usage of PWD by
CURDIR. PWD is provided by most shells, but not all, so this makes the
build system more robust.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Michal Marek <mmarek@suse.com>
The fact that the --children option is enabled by default is buried deep
at the end of the help page, in the overhead calculation section. This
make it explicit right where the option is listed, following the same
way other default options are described
Signed-off-by: Yannick Brosseau <scientist@fb.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: kernel-team@fb.com
Link: http://lkml.kernel.org/r/20161202160732.29058-1-scientist@fb.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It treats the idle_max_cpu little bit confusingly IMHO. Let's make it
more straight forward.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: David Ahern <dsahern@gmail.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20161206034010.6499-6-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Sometimes samples have tid of 0 but non-0 pid. It ends up having a new
thread of 0 tid/pid (instead of referring idle task) since tid is used
to search matching task. But I guess it's wrong to use 0 as a tid when
pid is set. This patch uses tid only if it has a non-zero value or same
as pid (of 0).
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20161206034010.6499-4-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The callchain_cursor__copy() function is to save current callchain
captured by a cursor. It'll be used to keep callchains when switching
to idle task for each cpu.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20161206034010.6499-3-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The -D/--dump-raw-trace option is in the parent option so no need to
repeat it. Also move -f/--force option to parent as it's common to
handle data file.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: David Ahern <dsahern@gmail.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20161206034010.6499-2-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo reported an unhelpful error message when running perf sched
timehist on a file that did not contain sched tracepoints:
[root@jouet ~]# perf sched timehist
No trace sample to read. Did you call 'perf record -R'?
[root@jouet ~]# perf evlist -v
cycles:ppp: size: 112, { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME|CALLCHAIN|CPU|PERIOD, disabled: 1, inherit: 1, mmap: 1, comm: 1, freq: 1, task: 1, precise_ip: 3, sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1
Change the has_traces check to look for the sched_switch event. Analysis
for perf sched timehist requires at least this event.
Now when analyzing a file without sched tracepoints you get:
root@f21-vbox:/tmp$ perf sched timehist
No sched_switch events found. Have you run 'perf sched record'?
Signed-off-by: David Ahern <dsahern@gmail.com>
Reported-and-Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1480451988-43673-1-git-send-email-dsahern@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Because there's no need for them in fixdep build.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1481030331-31944-4-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The fixdep tool needs to be built before everything else, because it fixes
every object dependency file.
We handle this currently by making all objects to depend on fixdep, which is
error prone and is easily forgotten when new object is added.
Instead of this, this patch force fixdep tool to be built as the first target
in the separate make session. This way we don't need to handle extra fixdep
dependencies and we are certain there's no fixdep race with any parallel make
job.
Committer notes:
Testing it:
Before:
$ rm -rf /tmp/build/perf/ ; mkdir -p /tmp/build/perf ; make -k O=/tmp/build/perf -C tools/perf install-bin
make: Entering directory '/home/acme/git/linux/tools/perf'
BUILD: Doing 'make -j4' parallel build
Auto-detecting system features:
... dwarf: [ on ]
... dwarf_getlocations: [ on ]
... glibc: [ on ]
... gtk2: [ on ]
... libaudit: [ on ]
... libbfd: [ on ]
... libelf: [ on ]
... libnuma: [ on ]
... numa_num_possible_cpus: [ on ]
... libperl: [ on ]
... libpython: [ on ]
... libslang: [ on ]
... libcrypto: [ on ]
... libunwind: [ on ]
... libdw-dwarf-unwind: [ on ]
... zlib: [ on ]
... lzma: [ on ]
... get_cpuid: [ on ]
... bpf: [ on ]
GEN /tmp/build/perf/common-cmds.h
HOSTCC /tmp/build/perf/fixdep.o
HOSTLD /tmp/build/perf/fixdep-in.o
LINK /tmp/build/perf/fixdep
MKDIR /tmp/build/perf/pmu-events/
HOSTCC /tmp/build/perf/pmu-events/json.o
MKDIR /tmp/build/perf/pmu-events/
HOSTCC /tmp/build/perf/pmu-events/jsmn.o
HOSTCC /tmp/build/perf/pmu-events/jevents.o
HOSTLD /tmp/build/perf/pmu-events/jevents-in.o
PERF_VERSION = 4.9.rc8.g868cd5
CC /tmp/build/perf/perf-read-vdso32
<SNIP>
After:
$ rm -rf /tmp/build/perf/ ; mkdir -p /tmp/build/perf ; make -k O=/tmp/build/perf -C tools/perf install-bin
make: Entering directory '/home/acme/git/linux/tools/perf'
BUILD: Doing 'make -j4' parallel build
HOSTCC /tmp/build/perf/fixdep.o
HOSTLD /tmp/build/perf/fixdep-in.o
LINK /tmp/build/perf/fixdep
Auto-detecting system features:
... dwarf: [ on ]
... dwarf_getlocations: [ on ]
... glibc: [ on ]
... gtk2: [ on ]
... libaudit: [ on ]
... libbfd: [ on ]
... libelf: [ on ]
... libnuma: [ on ]
... numa_num_possible_cpus: [ on ]
... libperl: [ on ]
... libpython: [ on ]
... libslang: [ on ]
... libcrypto: [ on ]
... libunwind: [ on ]
... libdw-dwarf-unwind: [ on ]
... zlib: [ on ]
... lzma: [ on ]
... get_cpuid: [ on ]
... bpf: [ on ]
GEN /tmp/build/perf/common-cmds.h
MKDIR /tmp/build/perf/fd/
CC /tmp/build/perf/fd/array.o
LD /tmp/build/perf/fd/libapi-in.o
MKDIR /tmp/build/perf/fs/
CC /tmp/build/perf/event-parse.o
CC /tmp/build/perf/fs/fs.o
PERF_VERSION = 4.9.rc8.g57a92f
CC /tmp/build/perf/event-plugin.o
MKDIR /tmp/build/perf/fs/
CC /tmp/build/perf/fs/tracing_path.o
<SNIP>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1481030331-31944-3-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
An upcoming fixdep fix needs all targets at the same area, so they'll
fit under a signal condition block.
Moving PERF-VERSION-FILE target into rules section.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1481030331-31944-2-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cancel builtin llvm and clang support when LLVM version is less than
3.9.0: following commits uses newer API.
Since Clang/LLVM's API is not guaranteed to be stable, add a
test-llvm-version.cpp feature checker, issue warning if LLVM found in
compiling environment is not tested yet.
Committer Notes:
Testing it:
Environment:
$ cat /etc/fedora-release
Fedora release 25 (Twenty Five)
$ rpm -q llvm-devel clang-devel
llvm-devel-3.8.0-1.fc25.x86_64
clang-devel-3.8.0-2.fc25.x86_64
$
Before:
$ make -k LIBCLANGLLVM=1 O=/tmp/build/perf -C tools/perf install-bin
make: Entering directory '/home/acme/git/linux/tools/perf'
BUILD: Doing 'make -j4' parallel build
Warning: tools/include/uapi/linux/bpf.h differs from kernel
Warning: tools/arch/arm/include/uapi/asm/kvm.h differs from kernel
INSTALL GTK UI
LINK /tmp/build/perf/perf
/tmp/build/perf/libperf.a(libperf-in.o): In function `perf::createCompilerInvocation(llvm::SmallVector<char const*, 16u>, llvm::StringRef&, clang::DiagnosticsEngine&)':
/home/acme/git/linux/tools/perf/util/c++/clang.cpp:56: undefined reference to `clang::tooling::newInvocation(clang::DiagnosticsEngine*, llvm::SmallVector<char const*, 16u> const&)'
/tmp/build/perf/libperf.a(libperf-in.o): In function `perf::getModuleFromSource(llvm::SmallVector<char const*, 16u>, llvm::StringRef, llvm::IntrusiveRefCntPtr<clang::vfs::FileSystem>)':
/home/acme/git/linux/tools/perf/util/c++/clang.cpp:68: undefined reference to `clang::CompilerInstance::CompilerInstance(std::shared_ptr<clang::PCHContainerOperations>, bool)'
/home/acme/git/linux/tools/perf/util/c++/clang.cpp:69: undefined reference to `clang::CompilerInstance::createDiagnostics(clang::DiagnosticConsumer*, bool)'
<SNIP>
After:
Makefile.config:807: No suitable libLLVM found, disabling builtin clang and llvm support. Please install llvm-dev(el) (>= 3.9.0)
Updating the environment to a locally built LLVM 4.0 + clang 3.9 (forgot
to git pull, duh) combo, all works as expected, it is properly detected
and built into the resulting perf binary.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Reported-and-Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexei Starovoitov <ast@fb.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Joe Stringer <joe@ovn.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/20161206072230.7651-1-wangnan0@huawei.com
[ Change the warning message a bit (add 'suitable' and 'builtin'), clarifying it, see committer notes above ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adding some missing non config targets that were for some reason
omitted.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1480884178-8072-7-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cleanup the fixdep tool before every test.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1480884178-8072-8-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Following fixdep fix needs all targets at the same area, so they'll fit
under signal condition block.
Moving python/perf.so target into rules section and intentionally
removing the perl script related comment.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1480884178-8072-5-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The upcoming fixdep fix needs all targets at the same area, so they'll
fit under a signal condition block.
Move install-gtk target into the rules section.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1480884178-8072-4-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
After this patch, perf utilizes builtin clang support to build BPF
script, no longer depend on external clang, but fallbacking to it
if for some reason the builtin compiling framework fails.
Test:
$ type clang
-bash: type: clang: not found
$ cat ~/.perfconfig
$ echo '#define LINUX_VERSION_CODE 0x040700' > ./test.c
$ cat ./tools/perf/tests/bpf-script-example.c >> ./test.c
$ ./perf record -v --dry-run -e ./test.c 2>&1 | grep builtin
bpf: successfull builtin compilation
$
Can't pass cflags so unable to include kernel headers now. Will be fixed
by following commits.
Committer notes:
Make sure '-v' comes before the '-e ./test.c' in the command line otherwise the
'verbose' variable will not be set when the bpf event is parsed and thus the
pr_debug indicating a 'successfull builtin compilation' will not be output, as
the debug level (1) will be less than what 'verbose' has at that point (0).
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexei Starovoitov <ast@fb.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Joe Stringer <joe@ovn.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/20161126070354.141764-16-wangnan0@huawei.com
[ Spell check/reflow successfull pr_debug string ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
getBPFObjectFromModule() is introduced to compile LLVM IR(Module)
to BPF object. Add new testcase for it.
Test result:
$ ./buildperf/perf test -v clang
51: builtin clang support :
51.1: builtin clang compile C source to IR :
--- start ---
test child forked, pid 21822
test child finished with 0
---- end ----
builtin clang support subtest 0: Ok
51.2: builtin clang compile C source to ELF object :
--- start ---
test child forked, pid 21823
test child finished with 0
---- end ----
builtin clang support subtest 1: Ok
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Cc: Alexei Starovoitov <ast@fb.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Joe Stringer <joe@ovn.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/20161126070354.141764-15-wangnan0@huawei.com
[ Remove redundant "Test" from entry descriptions ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Allow C++ code to use util.h and tests/llvm.h. Let 'perf test' compile a
real BPF script.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Cc: Alexei Starovoitov <ast@fb.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Joe Stringer <joe@ovn.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/20161126070354.141764-14-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Improve getModuleFromSource() API to accept a cflags list. This feature
will be used to pass LINUX_VERSION_CODE and -I flags.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Cc: Alexei Starovoitov <ast@fb.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Joe Stringer <joe@ovn.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/20161126070354.141764-13-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Utilize clang's OverlayFileSystem facility, allow CompilerInstance to
access real file system.
With this patch the '#include' directive can be used.
Add a new getModuleFromSource for real file.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Cc: Alexei Starovoitov <ast@fb.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Joe Stringer <joe@ovn.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/20161126070354.141764-12-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add basic clang support in clang.cpp and test__clang() testcase. The
first testcase checks if builtin clang is able to generate LLVM IR.
tests/clang.c is a proxy. Real testcase resides in
utils/c++/clang-test.cpp in c++ and exports C interface to perf test
subsystem.
Test result:
$ perf test -v clang
51: builtin clang support :
51.1: Test builtin clang compile C source to IR :
--- start ---
test child forked, pid 13215
test child finished with 0
---- end ----
Test builtin clang support subtest 0: Ok
Committer note:
Make sure you've enabled CLANG and LLVM builtin support by setting
the LIBCLANGLLVM variable on the make command line, e.g.:
make LIBCLANGLLVM=1 O=/tmp/build/perf -C tools/perf install-bin
Otherwise you'll get this when trying to do the 'perf test' call above:
# perf test clang
51: builtin clang support : Skip (not compiled in)
#
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexei Starovoitov <ast@fb.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Joe Stringer <joe@ovn.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/20161126070354.141764-11-wangnan0@huawei.com
[ Removed "Test" from descriptions, redundant and already removed from all the other entries ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add necessary c++ flags and link libraries to support builtin clang and
LLVM. Add all llvm and clang libraries, so don't need to worry about
clang changes its libraries setting. However, linking perf would take
much longer than usual.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Cc: Alexei Starovoitov <ast@fb.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Joe Stringer <joe@ovn.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/20161126070354.141764-10-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The following commits will use builtin clang to compile BPF scripts.
llvm__get_kbuild_opts() and llvm__get_nr_cpus() are extracted to help
building '-DKERNEL_VERSION_CODE' and '-D__NR_CPUS__' macros.
Doing object dumping in bpf loader, so further builtin clang compiling
needn't consider it.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Cc: Alexei Starovoitov <ast@fb.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Joe Stringer <joe@ovn.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/20161126070354.141764-7-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Pass a pointer to perf hook functions so they receive context
information during setup.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Cc: Alexei Starovoitov <ast@fb.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Joe Stringer <joe@ovn.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/20161126070354.141764-6-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Presume neglected in commit 786c1b5 "perf annotate: Start supporting
cross arch annotation". This doesn't fix a bug since none of the
affected arches support parsing dec/inc instructions yet.
Signed-off-by: Kim Phillips <kim.phillips@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Chris Ryder <chris.ryder@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will.deacon@arm.com>
Link: http://lkml.kernel.org/r/20161130092333.1cca5dd2c77e1790d61c1e9c@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Code move only; no functional change intended.
Committer notes:
Fix the build on Ubuntu 16.04 x86-64 cross-compiling to S/390, with this
set of auto-detected features:
... dwarf: [ on ]
... dwarf_getlocations: [ on ]
... glibc: [ on ]
... gtk2: [ OFF ]
... libaudit: [ OFF ]
... libbfd: [ OFF ]
... libelf: [ on ]
... libnuma: [ OFF ]
... numa_num_possible_cpus: [ OFF ]
... libperl: [ OFF ]
... libpython: [ OFF ]
... libslang: [ OFF ]
... libcrypto: [ OFF ]
... libunwind: [ OFF ]
... libdw-dwarf-unwind: [ on ]
... zlib: [ on ]
... lzma: [ OFF ]
... get_cpuid: [ OFF ]
... bpf: [ on ]
Where it was failing with:
CC /tmp/build/perf/util/time-utils.o
util/time-utils.c: In function 'parse_nsec_time':
util/time-utils.c:17:13: error: implicit declaration of function 'strtoul' [-Werror=implicit-function-declaration]
time_sec = strtoul(str, &end, 10);
^
util/time-utils.c:17:2: error: nested extern declaration of 'strtoul' [-Werror=nested-externs]
time_sec = strtoul(str, &end, 10);
^
util/time-utils.c: In function 'perf_time__parse_str':
util/time-utils.c:93:2: error: implicit declaration of function 'free' [-Werror=implicit-function-declaration]
free(str);
^
util/time-utils.c:93:2: error: incompatible implicit declaration of built-in function 'free' [-Werror]
util/time-utils.c:93:2: note: include '<stdlib.h>' or provide a declaration of 'free'
Do as suggested and add a '#include <stdlib.h>' to get the free() and strtoul()
declarations and fix the build.
Signed-off-by: David Ahern <dsahern@gmail.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1480439746-42695-3-git-send-email-dsahern@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add function to parse a user time string of the form <start>,<stop>
where start and stop are time in sec.nsec format. Both start and stop
times are optional.
Add function to determine if a sample time is within a given time
time window of interest.
Signed-off-by: David Ahern <dsahern@gmail.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1480439746-42695-2-git-send-email-dsahern@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Track freed memory as well as allocations and show the net in the
summary.
Committer notes:
Testing it:
# perf kmem record usleep 1
[ perf record: Woken up 0 times to write data ]
[ perf record: Captured and wrote 1.626 MB perf.data (4208 samples) ]
[root@jouet ~]# perf kmem stat --slab
SUMMARY (SLAB allocator)
========================
Total bytes requested: 234,011
Total bytes allocated: 234,504
Total bytes freed: 213,328 <------
Net total bytes allocated: 21,176
Total bytes wasted on internal fragmentation: 493
Internal fragmentation: 0.210231%
Cross CPU allocations: 4/1,963
#
Signed-off-by: David Ahern <dsahern@gmail.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1480110133-37039-1-git-send-email-dsahern@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Having "test" in almost all test descriptions is redundant, simplify it
removing and rewriting tests with such descriptions.
End result:
# perf test
1: vmlinux symtab matches kallsyms : Ok
2: Detect openat syscall event : Ok
3: Detect openat syscall event on all cpus : Ok
4: Read samples using the mmap interface : Ok
5: Parse event definition strings : Ok
6: PERF_RECORD_* events & perf_sample fields : Ok
7: Parse perf pmu format : Ok
8: DSO data read : Ok
9: DSO data cache : Ok
10: DSO data reopen : Ok
11: Roundtrip evsel->name : Ok
12: Parse sched tracepoints fields : Ok
13: syscalls:sys_enter_openat event fields : Ok
14: Setup struct perf_event_attr : Ok
15: Match and link multiple hists : Ok
16: 'import perf' in python : Ok
17: Breakpoint overflow signal handler : Ok
18: Breakpoint overflow sampling : Ok
19: Number of exit events of a simple workload : Ok
20: Software clock events period values : Ok
21: Object code reading : Ok
22: Sample parsing : Ok
23: Use a dummy software event to keep tracking: Ok
24: Parse with no sample_id_all bit set : Ok
25: Filter hist entries : Ok
26: Lookup mmap thread : Ok
27: Share thread mg : Ok
28: Sort output of hist entries : Ok
29: Cumulate child hist entries : Ok
30: Track with sched_switch : Ok
31: Filter fds with revents mask in a fdarray : Ok
32: Add fd to a fdarray, making it autogrow : Ok
33: kmod_path__parse : Ok
34: Thread map : Ok
35: LLVM search and compile :
35.1: Basic BPF llvm compile : Ok
35.2: kbuild searching : Ok
35.3: Compile source for BPF prologue generation: Ok
35.4: Compile source for BPF relocation : Ok
36: Session topology : Ok
37: BPF filter :
37.1: Basic BPF filtering : Ok
37.2: BPF prologue generation : Ok
37.3: BPF relocation checker : Ok
38: Synthesize thread map : Ok
39: Synthesize cpu map : Ok
40: Synthesize stat config : Ok
41: Synthesize stat : Ok
42: Synthesize stat round : Ok
43: Synthesize attr update : Ok
44: Event times : Ok
45: Read backward ring buffer : Ok
46: Print cpu map : Ok
47: Probe SDT events : Ok
48: is_printable_array : Ok
49: Print bitmap : Ok
50: perf hooks : Ok
51: x86 rdpmc : Ok
52: Convert perf time to TSC : Ok
53: DWARF unwind : Ok
54: x86 instruction decoder - new instructions : Ok
55: Intel cqm nmi context read : Skip
#
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-rx2lbfcrrio2yx1fxcljqy0e@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Perf hooks allow hooking user code at perf events. They can be used for
manipulation of BPF maps, taking snapshot and reporting results. In this
patch two perf hook points are introduced: record_start and record_end.
To avoid buggy user actions, a SIGSEGV signal handler is introduced into
'perf record'. It turns off perf hook if it causes a segfault and report
an error to help debugging.
A test case for perf hook is introduced.
Test result:
$ ./buildperf/perf test -v hook
50: Test perf hooks :
--- start ---
test child forked, pid 10311
SIGSEGV is observed as expected, try to recover.
Fatal error (SEGFAULT) in perf hook 'test'
test child finished with 0
---- end ----
Test perf hooks: Ok
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Cc: Alexei Starovoitov <ast@fb.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Joe Stringer <joe@ovn.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/20161126070354.141764-5-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add handlers for sched:sched_migrate_task event. Total number of
migrations is added to summary display and -M/--migrations can be used
to show migration events.
Signed-off-by: David Ahern <dsahern@gmail.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1480091321-35591-1-git-send-email-dsa@cumulusnetworks.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To help in debugging when the wrong offset is being used, like in:
│13d98: ↓ jne 13dd1 <lzma_lzma_preset@@XZ_5.0+0x28e1>
That is the full line from objdump, and it seems what should be used is
13dd1, not 28e1.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-4nc0marsgst1ft6inmvqber7@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To print some values, like in the annotation code with invalid jump
offsets.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-1vk0g5twas2ioswn1mmvnvwq@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Commit 0b3c2264ae ("perf symbols: Fix kallsyms perf test on ppc64le")
refers struct symbol in probe_event.h, but forgets to include its
definition. Gcc will complain about it when that definition is not
added, by sheer luck, by some other header included before
probe_event.h.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Cc: Alexei Starovoitov <ast@fb.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/20161115040617.69788-4-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Before this patch perf panics if kptr_restrict is set to 1 and perf is
owned by root with suid set:
$ whoami
wangnan
$ ls -l ./perf
-rwsr-xr-x 1 root root 19781908 Sep 21 19:29 /home/wangnan/perf
$ cat /proc/sys/kernel/kptr_restrict
1
$ cat /proc/sys/kernel/perf_event_paranoid
-1
$ ./perf record -a
Segmentation fault (core dumped)
$
The reason is that perf assumes it is allowed to read kptr from
/proc/kallsyms when euid is root, but in fact the kernel doesn't allow
reading kptr when euid and uid do not match with each other:
$ cp /bin/cat .
$ sudo chown root:root ./cat
$ sudo chmod u+s ./cat
$ cat /proc/kallsyms | grep do_fork
0000000000000000 T _do_fork <--- kptr is hidden even euid is root
$ sudo cat /proc/kallsyms | grep do_fork
ffffffff81080230 T _do_fork
See lib/vsprintf.c for kernel side code.
This patch fixes this problem by checking both uid and euid.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexei Starovoitov <ast@fb.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/20161115040617.69788-3-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
On ubuntu the internal kernel version code is different from what can
be retrived from uname:
$ uname -r
4.4.0-47-generic
$ cat /lib/modules/`uname -r`/build/include/generated/uapi/linux/version.h
#define LINUX_VERSION_CODE 263192
#define KERNEL_VERSION(a,b,c) (((a) << 16) + ((b) << 8) + (c))
$ cat /lib/modules/`uname -r`/build/include/generated/utsrelease.h
#define UTS_RELEASE "4.4.0-47-generic"
#define UTS_UBUNTU_RELEASE_ABI 47
$ cat /proc/version_signature
Ubuntu 4.4.0-47.68-generic 4.4.24
The macro LINUX_VERSION_CODE is set to 4.4.24 (263192 == 0x40418), but
`uname -r` reports 4.4.0.
This mismatch causes LINUX_VERSION_CODE macro passed to BPF script become
an incorrect value, results in magic failure in BPF loading:
$ sudo ./buildperf/perf record -e ./tools/perf/tests/bpf-script-example.c ls
event syntax error: './tools/perf/tests/bpf-script-example.c'
\___ Failed to load program for unknown reason
According to Ubuntu document (https://wiki.ubuntu.com/Kernel/FAQ), the
correct kernel version can be retrived through /proc/version_signature, which
is ubuntu specific.
This patch checks the existance of /proc/version_signature, and returns
version number through parsing this file instead of uname. Version string
is untouched (value returns from uname) because `uname -r` is required
to be consistence with path of kbuild directory in /lib/module.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Cc: Alexei Starovoitov <ast@fb.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/20161115040617.69788-2-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
For tracepoint events, callchains always contain certain functions.
Sometimes it'd be better to skip those functions as they have no value.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/20161124011114.7102-2-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
By using arch->init() to set up some regular expressions to associate
ins_ops to ARM instructions, ditching that old table that has
instructions not present on ARM.
Take advantage of having an arch->init() to hide more arm specific stuff
from the common code, like the objdump details.
The regular expressions comes from a patch written by Kim Phillips.
Reviewed-by: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Chris Riyder <chris.ryder@arm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kim Phillips <kim.phillips@arm.com>
Cc: Markus Trippelsdorf <markus@trippelsdorf.de>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Cc: Taeung Song <treeze.taeung@gmail.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-77m7lufz9ajjimkrebtg5ead@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arches like ARM will want to use regular expressions when deciding what
instructions to associate with what ins_ops, provide infrastructure for
that.
Reviewed-by: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Chris Riyder <chris.ryder@arm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kim Phillips <kim.phillips@arm.com>
Cc: Markus Trippelsdorf <markus@trippelsdorf.de>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Cc: Taeung Song <treeze.taeung@gmail.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-7dmnk9el2ipu3nxog092k9z5@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Some arches may want to dynamically populate the table using regular
expressions on the instruction names to associate them with a set of
parsing/formatting/etc functions (struct ins_ops), so provide a fallback
for when the ins__find() method fails.
That fall back will be able to resize the arch->instructions, setting
arch->nr_instructions appropriately, helper functions to associate an
ins_ops to an instruction name, growing the arch->instructions if needed
and resorting it are provided, all the arch specific callback needs to
do is to decide if the missing instruction should be added to
arch->instructions with a ins_ops association.
Reviewed-by: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Chris Riyder <chris.ryder@arm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kim Phillips <kim.phillips@arm.com>
Cc: Markus Trippelsdorf <markus@trippelsdorf.de>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Cc: Taeung Song <treeze.taeung@gmail.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-auu13yradxf7g5dgtpnzt97a@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The disasm_line::name field is always equal to ins::name, being used
just to locate the instruction's ins_ops from the per-arch instructions
table.
Eliminate this duplication, nuking that field and instead make
ins__find() return an ins_ops, store it in disasm_line::ins.ops, and
keep just in disasm_line::ins.name what was in disasm_line::name, this
way we end up not keeping a reference to entries in the per-arch
instructions table.
This in turn will help supporting multiple ways to manage the per-arch
instructions table, allowing resorting that array, for instance, when
the entries will move after references to its addresses were made. The
same problem is avoided when one grows the array with realloc.
So architectures simply keeping a constant array will work as well as
architectures building the table using regular expressions or other
logic that involves resorting the table.
Reviewed-by: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Chris Riyder <chris.ryder@arm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kim Phillips <kim.phillips@arm.com>
Cc: Markus Trippelsdorf <markus@trippelsdorf.de>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Cc: Taeung Song <treeze.taeung@gmail.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-vr899azvabnw9gtuepuqfd9t@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
New tool:
- 'perf sched timehist' provides an analysis of scheduling events.
Example usage:
perf sched record -- sleep 1
perf sched timehist
By default it shows the individual schedule events, including the wait
time (time between sched-out and next sched-in events for the task), the
task scheduling delay (time between wakeup and actually running) and run
time for the task:
time cpu task name wait time sch delay run time
[tid/pid] (msec) (msec) (msec)
-------- ------ ---------------- --------- --------- --------
1.874569 [0011] gcc[31949] 0.014 0.000 1.148
1.874591 [0010] gcc[31951] 0.000 0.000 0.024
1.874603 [0010] migration/10[59] 3.350 0.004 0.011
1.874604 [0011] <idle> 1.148 0.000 0.035
1.874723 [0005] <idle> 0.016 0.000 1.383
1.874746 [0005] gcc[31949] 0.153 0.078 0.022
...
Times are in msec.usec. (David Ahern, Namhyung Kim)
Improvements:
- Make 'perf c2c report' support -f/--force, to allow skipping the
ownership check for root users, for instance, just like the other
tools (Jiri Olsa)
- Allow sorting cachelines by total number of HITMs, in addition to
local and remote numbers (Jiri Olsa)
Fixes:
- Make sure errors aren't suppressed by the TUI reset at the end of
a 'perf c2c report' session (Jiri Olsa)
Infrastructure:
- Initial work on having the annotate code better support multiple
architectures, including the ability to cross-annotate, i.e. to
annotate perf.data files collected on an ARM system on a x86_64
workstation (Arnaldo Carvalho de Melo, Ravi Bangoria, Kim Phillips)
- Use USECS_PER_SEC instead of hard coded number in libtraceevent (Steven Rostedt)
- Add retrieval of preempt count and latency flags in libtraceevent (Steven Rostedt)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=gL8a
-----END PGP SIGNATURE-----
Merge tag 'perf-core-for-mingo-20161123' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core
Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo:
New tool:
- 'perf sched timehist' provides an analysis of scheduling events.
Example usage:
perf sched record -- sleep 1
perf sched timehist
By default it shows the individual schedule events, including the wait
time (time between sched-out and next sched-in events for the task), the
task scheduling delay (time between wakeup and actually running) and run
time for the task:
time cpu task name wait time sch delay run time
[tid/pid] (msec) (msec) (msec)
-------- ------ ---------------- --------- --------- --------
1.874569 [0011] gcc[31949] 0.014 0.000 1.148
1.874591 [0010] gcc[31951] 0.000 0.000 0.024
1.874603 [0010] migration/10[59] 3.350 0.004 0.011
1.874604 [0011] <idle> 1.148 0.000 0.035
1.874723 [0005] <idle> 0.016 0.000 1.383
1.874746 [0005] gcc[31949] 0.153 0.078 0.022
...
Times are in msec.usec. (David Ahern, Namhyung Kim)
Improvements:
- Make 'perf c2c report' support -f/--force, to allow skipping the
ownership check for root users, for instance, just like the other
tools (Jiri Olsa)
- Allow sorting cachelines by total number of HITMs, in addition to
local and remote numbers (Jiri Olsa)
Fixes:
- Make sure errors aren't suppressed by the TUI reset at the end of
a 'perf c2c report' session (Jiri Olsa)
Infrastructure changes:
- Initial work on having the annotate code better support multiple
architectures, including the ability to cross-annotate, i.e. to
annotate perf.data files collected on an ARM system on a x86_64
workstation (Arnaldo Carvalho de Melo, Ravi Bangoria, Kim Phillips)
- Use USECS_PER_SEC instead of hard coded number in libtraceevent (Steven Rostedt)
- Add retrieval of preempt count and latency flags in libtraceevent (Steven Rostedt)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
If callchains were recorded they are appended to the line with a default stack depth of 5:
1.874569 [0011] gcc[31949] 0.014 0.000 1.148 wait_for_completion_killable <- do_fork <- sys_vfork <- stub_vfork <- __vfork
1.874591 [0010] gcc[31951] 0.000 0.000 0.024 __cond_resched <- _cond_resched <- wait_for_completion <- stop_one_cpu <- sched_exec
1.874603 [0010] migration/10[59] 3.350 0.004 0.011 smpboot_thread_fn <- kthread <- ret_from_fork
1.874604 [0011] <idle> 1.148 0.000 0.035 cpu_startup_entry <- start_secondary
1.874723 [0005] <idle> 0.016 0.000 1.383 cpu_startup_entry <- start_secondary
1.874746 [0005] gcc[31949] 0.153 0.078 0.022 do_wait sys_wait4 <- system_call_fastpath <- __GI___waitpid
--no-call-graph can be used to not show the callchains. --max-stack is used
to control the number of frames shown (default of 5). -x/--excl options can
be used to collapse redundant callchains to get more relevant data on screen.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/20161116060634.28477-7-namhyung@kernel.org
[ Add documentation based on above commit message ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The -s/--summary option is to show process runtime statistics. And the
-S/--with-summary option is to show the stats with the normal output.
$ perf sched timehist -s
Runtime summary
comm parent sched-in run-time min-run avg-run max-run stddev
(count) (msec) (msec) (msec) (msec) %
---------------------------------------------------------------------------------------------------------
ksoftirqd/0[3] 2 2 0.011 0.004 0.005 0.006 14.87
rcu_preempt[7] 2 11 0.071 0.002 0.006 0.017 20.23
watchdog/0[11] 2 1 0.002 0.002 0.002 0.002 0.00
watchdog/1[12] 2 1 0.004 0.004 0.004 0.004 0.00
...
Terminated tasks:
sleep[7220] 7219 3 0.770 0.087 0.256 0.576 62.28
Idle stats:
CPU 0 idle for 2352.006 msec
CPU 1 idle for 2764.497 msec
CPU 2 idle for 2998.229 msec
CPU 3 idle for 2967.800 msec
Total number of unique tasks: 52
Total number of context switches: 2532
Total run time (msec): 218.036
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/20161116060634.28477-5-namhyung@kernel.org
[ Add documentation from last commit, so that docs comes with the cset that introduces the feature ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
'perf sched timehist' provides an analysis of scheduling events.
Example usage:
perf sched record -- sleep 1
perf sched timehist
By default it shows the individual schedule events, including the wait
time (time between sched-out and next sched-in events for the task), the
task scheduling delay (time between wakeup and actually running) and run
time for the task:
time cpu task name wait time sch delay run time
[tid/pid] (msec) (msec) (msec)
-------------- ------ -------------------- --------- --------- ---------
79371.874569 [0011] gcc[31949] 0.014 0.000 1.148
79371.874591 [0010] gcc[31951] 0.000 0.000 0.024
79371.874603 [0010] migration/10[59] 3.350 0.004 0.011
79371.874604 [0011] <idle> 1.148 0.000 0.035
79371.874723 [0005] <idle> 0.016 0.000 1.383
79371.874746 [0005] gcc[31949] 0.153 0.078 0.022
...
Times are in msec.usec.
Committer note:
Add above explanation as the 'perf sched timehist' entry for 'man
perf-sched'.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/20161116060634.28477-4-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The __symbol__fprintf_symname_offs() always shows symbol offsets. So
there's no difference between 'perf script -F ip,sym' and 'perf script
-F ip,sym,symoff'. I don't think it's a desired behavior..
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/20161116060634.28477-2-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adding support for cascading options added by Namhyung in:
commit 369a247897 ("tools lib subcmd: Support cascading options")
This way the report and record command share options with with c2c
command and can save some option duplicates. For now it's the 'v'
option.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Joe Mario <jmario@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1479764011-10732-7-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently we display the cacheline list sorted on remote HITMs by
default.
The problem is that they might not be always counted and 'perf c2c
report' displays an empty output. Thus it's more convenient to display
and sort the cacheline list based on the total of HITMs and have the
best change to see data in the default report run.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Joe Mario <jmario@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1479764011-10732-6-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Count total number of HITMs in a special field. This will ease up
addition of total HITM sorting into c2c report in the following patch.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Joe Mario <jmario@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1479764011-10732-5-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adding -f/--force option to go through ownership validation:
$ sudo perf c2c report
File perf.data not owned by current user or root (use -f to override)
$
$ sudo perf c2c report -f
< c2c report output >
$
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Joe Mario <jmario@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1479764011-10732-4-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Because of the early browser switch we won't get possible error
messages, as it will clear the screen right after showing the message,
e.g.:
Before:
$ sudo perf c2c report -d lcl
$
After:
$ sudo perf c2c report -d lcl
File perf.data not owned by current user or root (use -f to override)
$
$ ls -la perf.data
-rw-------. 1 acme acme 26648 Nov 22 15:11 perf.data
$
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Joe Mario <jmario@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1479764011-10732-3-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It is useful for debug to see file descriptors for each event.
Before:
$ perf stat -vvv -e cycles,cache-misses ls
...
sys_perf_event_open: pid 12146 cpu -1 group_fd -1 flags 0x8
...
sys_perf_event_open: pid 12146 cpu -1 group_fd 3 flags 0x8
sys_perf_event_open failed, error -13
Now:
$ perf stat -vvv -e cycles,cache-misses ls
...
sys_perf_event_open: pid 12858 cpu -1 group_fd -1 flags 0x8 = 3
...
sys_perf_event_open: pid 12858 cpu -1 group_fd 3 flags 0x8
sys_perf_event_open failed, error -13
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Joe Mario <jmario@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1479764011-10732-2-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Another step in supporting cross annotation.
The arch specific tables are put in:
tools/perf/arch/$ARCH/annotation/instructions.c
which, so far, just plug instructions to a bunch of parsers/formatters,
but may have more as the need arises.
This is an alternative implementation to a previous attempt made by Ravi
Bangoria.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Chris Riyder <chris.ryder@arm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kim Phillips <kim.phillips@arm.com>
Cc: Markus Trippelsdorf <markus@trippelsdorf.de>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Cc: Taeung Song <treeze.taeung@gmail.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-g3wt282lfa51j4qd0813e3az@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This is to cope with an ARM specific kludge introduced in the original
patch supporting ARM annotation, cfef25b8da ("perf annotate: ARM
support") that made functions with a '+' in its name to be skipped when
processing call instructions.
With this patchkit it should be possible to collect a perf.data file on
a ARM machine and then annotate it on a x86 workstation and have those
ARM kludges used.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Chris Riyder <chris.ryder@arm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kim Phillips <kim.phillips@arm.com>
Cc: Markus Trippelsdorf <markus@trippelsdorf.de>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Cc: Taeung Song <treeze.taeung@gmail.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-2fi3sy7q3sssdi7m7cbe07gy@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Introduce a 'struct arch', where arch specific stuff will live, starting
with objdump's choice of comment delimitation character, that is '#' in
x86 while a ';' in arm.
This has some bits and pieces from a patch submitted by Ravi.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Chris Riyder <chris.ryder@arm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kim Phillips <kim.phillips@arm.com>
Cc: Markus Trippelsdorf <markus@trippelsdorf.de>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Cc: Taeung Song <treeze.taeung@gmail.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-f337tzjjcl8vtapgvjxmhrbx@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
If the branch is 100% predicted then the "predicted" is hidden.
Similarly, if there is no branch tsx abort, the "abort" is hidden.
There is only cycles shown (cycle is supported on skylake platform,
older platform would be 0).
If no iterations, the "iterations" is hidden.
Signed-off-by: Yao Jin <yao.jin@linux.intel.com>
Acked-by: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Linux-kernel@vger.kernel.org
Cc: Yao Jin <yao.jin@linux.intel.com>
Link: http://lkml.kernel.org/r/1477876794-30749-6-git-send-email-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
If the branch is 100% predicted then the "predicted" is hidden.
Similarly, if there is no branch tsx abort, the "abort" is hidden.
There is only cycles shown (cycle is supported on skylake platform,
older platform would be 0).
If no iterations, the "iterations" is hidden.
For example:
|--29.93%--main div.c:39 (predicted:50.6%, cycles:1, iterations:18)
| main div.c:44 (predicted:50.6%, cycles:1)
| |
| --22.69%--main div.c:42 (cycles:2, iterations:17)
| compute_flag div.c:28 (cycles:2)
| |
| --10.52%--compute_flag div.c:27 (cycles:1)
| rand rand.c:28 (cycles:1)
| rand rand.c:28 (cycles:1)
| __random random.c:298 (cycles:1)
| __random random.c:297 (cycles:1)
| __random random.c:295 (cycles:1)
| __random random.c:295 (cycles:1)
| __random random.c:295 (cycles:1)
| __random random.c:295 (cycles:6)
Signed-off-by: Yao Jin <yao.jin@linux.intel.com>
Acked-by: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Linux-kernel@vger.kernel.org
Cc: Yao Jin <yao.jin@linux.intel.com>
Link: http://lkml.kernel.org/r/1477876794-30749-5-git-send-email-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Create some branch counters in per callchain list entry. Each counter
is for a branch flag. For example, predicted_count counts all the
*predicted* branches. The counters get updated by processing the
callchain cursor nodes.
It also provides functions to retrieve or print the values of counters
in callchain list.
Besides the counting for branch flags, it also counts and returns the
average number of iterations.
Signed-off-by: Yao Jin <yao.jin@linux.intel.com>
Acked-by: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Linux-kernel@vger.kernel.org
Cc: Yao Jin <yao.jin@linux.intel.com>
Link: http://lkml.kernel.org/r/1477876794-30749-4-git-send-email-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Create a new flag show_branchflag_count in symbol_conf. The flag is used
to control if showing the branch flag counting information. The flag
depends on if the perf.data has branch data and if user chooses the
"branch-history" option in perf report command line.
Signed-off-by: Yao Jin <yao.jin@linux.intel.com>
Acked-by: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Linux-kernel@vger.kernel.org
Cc: Yao Jin <yao.jin@linux.intel.com>
Link: http://lkml.kernel.org/r/1477876794-30749-3-git-send-email-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Since the branch ip has been added to call stack for easier browsing,
this patch adds more branch information. For example, add a flag to
indicate if this ip is a branch, and also add with the branch flag.
Then we can know if the cursor node represents a branch and know what
the branch flag it has.
The branch history code has a loop detection pass that removes loops. It
would be nice for knowing how many loops were removed then in next
steps, we can compute out the average number of iterations.
For example:
Before remove_loops(),
entry0: from = 0x100, to = 0x200
entry1: from = 0x300, to = 0x250
entry2: from = 0x300, to = 0x250
entry3: from = 0x300, to = 0x250
entry4: from = 0x700, to = 0x800
After remove_loops()
entry0: from = 0x100, to = 0x200
entry1: from = 0x300, to = 0x250
entry2: from = 0x700, to = 0x800
The original entry2 and entry3 are removed. So the number of iterations
(from = 0x300, to = 0x250) is equal to removed number + 1 (2 + 1).
iterations = removed number + 1;
average iteractions = Sum(iteractions) / number of samples
This formula ignores other cases, for example, iterations cross multiple
buffers and one buffer contains 2+ loops. Because in practice, it's good
enough.
Signed-off-by: Yao Jin <yao.jin@linux.intel.com>
Acked-by: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Linux-kernel@vger.kernel.org
Cc: Yao Jin <yao.jin@linux.intel.com>
Link: http://lkml.kernel.org/n/1477876794-30749-2-git-send-email-yao.jin@linux.intel.com
[ Renamed 'iter' to 'nr_loop_iter' for clarity ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To write config items to a particular config file, we should know where
is each config section and item from.
Current setting functionality of perf-config use autogenerating way by
overwriting collected config items to a config file.
For example, when collecting config items from user and system config
files (i.e. ~/.perfconfig and $(sysconf)/perfconfig), perf_config_set
can contain both user and system config items. So we should know where
each value is from to avoid merging user and system config items on user
config file.
Signed-off-by: Taeung Song <treeze.taeung@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Nambong Ha <over3025@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: Wookje Kwon <aweee0@gmail.com>
Link: http://lkml.kernel.org/r/1478241862-31230-7-git-send-email-treeze.taeung@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add setting feature that can add config variables with their values to a
config file (i.e. user or system config file) or modify config key-value
pairs in a config file. For the syntax examples:
perf config [<file-option>] [section.name[=value] ...]
e.g. You can set the ui.show-headers to false with
# perf config ui.show-headers=false
If you want to add or modify several config items, you can do like
# perf config annotate.show_nr_jumps=false kmem.default=slab
Committer notes:
Testing it:
$ perf config -l
top.children=true
report.children=false
$
$ perf config top.children=false
$ perf config -l
top.children=false
report.children=false
$
$ perf config kmem.default=slab
$ perf config -l
top.children=false
report.children=false
kmem.default=slab
$
Signed-off-by: Taeung Song <treeze.taeung@gmail.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Nambong Ha <over3025@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: Wookje Kwon <aweee0@gmail.com>
Link: http://lkml.kernel.org/r/1478241862-31230-5-git-send-email-treeze.taeung@gmail.com
[ Combined patch with docs update with this one ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
You can show the values for several config items as below:
# perf config report.queue-size call-graph.record-mode
but it is necessary to more precisely check arguments, before passing
them to show_spec_config(). This validation function would be also used
when parsing config key-value pairs arguments in the near future.
Committer notes:
Testing it:
$ perf config bla.
The config variable does not contain a variable name: bla.
$ perf config .bla
The config variable does not contain a section name: .bla
$ perf config bla.bla
$
Signed-off-by: Taeung Song <treeze.taeung@gmail.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Nambong Ha <over3025@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: Wookje Kwon <aweee0@gmail.com>
Link: http://lkml.kernel.org/r/1478241862-31230-4-git-send-email-treeze.taeung@gmail.com
[ Fix some spelling errors ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add a functionality getting specific config key-value pairs.
For the syntax examples,
perf config [<file-option>] [section.name ...]
e.g. To query config items 'report.queue-size' and 'report.children', do
# perf config report.queue-size report.children
Signed-off-by: Taeung Song <treeze.taeung@gmail.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Nambong Ha <over3025@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: Wookje Kwon <aweee0@gmail.com>
Link: http://lkml.kernel.org/r/1478241862-31230-2-git-send-email-treeze.taeung@gmail.com
[ Combined patch with docs update with this one ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Now when jvmti compilation is plugged into Makefile.perf, there's no
need for this makefile.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Stephane Eranian <eranian@google.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: William Cohen <wcohen@redhat.com>
Link: http://lkml.kernel.org/r/20161112121016.GA17194@krava
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Compile jvmti agent as part of the perf build. The agent library is
called libperf-jvmti.so and is installed in default place together with
other files:
$ make libperf-jvmti.so
BUILD: Doing 'make -j4' parallel build
...
CC jvmti/libjvmti.o
CC jvmti/jvmti_agent.o
LD jvmti/jvmti-in.o
LINK libperf-jvmti.so
$ make DESTDIR=/tmp/krava/ install-bin
...
$ find /tmp/krava/ | grep libperf
/tmp/krava/lib64/libperf-jvmti.so
/tmp/krava/lib64/libperf-gtk.so
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Stephane Eranian <eranian@google.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: William Cohen <wcohen@redhat.com>
Link: http://lkml.kernel.org/r/1478093749-5602-4-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Markus reported that there's a weird behavior on perf top --hierarchy
regarding the column length.
Looking at the code, I found a dubious code which affects the symptoms.
When --hierarchy option is used, the last column length might be
inaccurate since it skips to update the length on leaf entries.
I cannot remember why it did and looks like a leftover from previous
version during the development.
Anyway, updating the column length often is not harmful. So let's move
the code out.
Reported-and-Tested-by: Markus Trippelsdorf <markus@trippelsdorf.de>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Fixes: 1a3906a7e6 ("perf hists: Resort hist entries with hierarchy")
Link: http://lkml.kernel.org/r/20161108130833.9263-5-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When horizontall scrolling is used in hierarchy mode, the the right most
column has unnecessary indentation. Actually it's needed only if some
of left (overhead) columns were shown.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Markus Trippelsdorf <markus@trippelsdorf.de>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20161108130833.9263-4-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When horizontal scrolling is used in hierarchy mode, the folded signed
disappears at the right most column.
Committer note:
To test it, run 'perf top --hierarchy, see the '+' symbol at the first
column, then press the right arrow key, the '+' symbol will disappear,
this patch fixes that.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Markus Trippelsdorf <markus@trippelsdorf.de>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20161108130833.9263-3-namhyung@kernel.org
[ Move 'width -= 2' invariant to right after the if/else ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It should indent 2 spaces for folded sign and a whitespace.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Markus Trippelsdorf <markus@trippelsdorf.de>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20161108130833.9263-2-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The perf report/top on TUI supports horizontal scrolling using LEFT and
RIGHT keys.
But it calculate the number of columns incorrectly when hierarchy mode
is enabled so that keep pressing RIGHT key can make the output
disappeared.
In the hierarchy mode, all sort keys are collapsed into a single column,
so it needs to be applied when calculating column numbers.
Reported-and-Tested-by: Markus Trippelsdorf <markus@trippelsdorf.de>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20161024162110.17918-1-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Since 841e3558b2 ("perf callchain: Recording 'dwarf' callchains do not
need DWARF unwinding support"), --call-graph dwarf is allowed in 'perf
record' even without unwind support. A couple of other places don't
reflect this yet though: the help text should list dwarf as a valid
record mode and the dump_size config should be respected too.
Signed-off-by: Rabin Vincent <rabinv@axis.com>
Cc: He Kuang <hekuang@huawei.com>
Fixes: 841e3558b2 ("perf callchain: Recording 'dwarf' callchains do not need DWARF unwinding support")
Link: http://lkml.kernel.org/r/1470837148-7642-1-git-send-email-rabin.vincent@axis.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In ac12f6764c ("perf tools: Implement branch_type event parameter") we
started using the parse_branch_str() function from one of the files used
in the python binding, which caused this entry in 'perf test' to fail:
# perf test -v python
16: Try 'import perf' in python, checking link problems :
--- start ---
test child forked, pid 16667
Traceback (most recent call last):
File "<stdin>", line 1, in <module>
ImportError: /tmp/build/perf/python/perf.so: undefined symbol:
parse_branch_str
test child finished with -1
---- end ----
Try 'import perf' in python, checking link problems: FAILED!
#
I must've commited some mistake when running 'perf test' to send the
pull request for the perf-core-for-mingo-20161024 tag, to have let this
regression to pass, sigh.
Just add tools/perf/util/parse-branch-options.c and switch from using
ui__warning(), that is not available in the python binding, use
pr_warning() instead, which is good enough for this case.
Now:
# perf test python
16: Try 'import perf' in python, checking link problems : Ok
#
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: Andi Kleen <ak@linux.intel.com>
Fixes: ac12f6764c ("perf tools: Implement branch_type event parameter")
Link: http://lkml.kernel.org/n/tip-9kn1ct1cx9ppwqlmzl6z0xhs@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Removing one more set of die() calls.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-6pyil685m5i2tugg56gcy0tg@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Both register_perl_scripting() and register_python_scripting() allocate
this variable, fix it by checking if it already was.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Wang Nan <wangnan0@huawei.com>
Fixes: 7e4b21b84c ("perf/scripts: Add Python scripting engine")
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Introduced in commit f9afc6197e ("x86: Wire up protection keys system
calls")
This will make 'perf trace' aware of them on x86_64.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-s1ta2ttv2xacecqogmd3a9p1@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Ignore export.h and EXPORT_SYMBOL in:
784d5699ed ("x86: move exports to actual definitions")
We're not dragging this stuff, not useful in tools/
This silences the following warnings while building perf:
Warning: tools/arch/x86/lib/memcpy_64.S differs from kernel
Warning: tools/arch/x86/lib/memset_64.S differs from kernel
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-h9vw3pe0fq79zmyqsfr0s0mo@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add support in perf list topic to only show events belonging to a
specific vendor events topic. For example the following works now:
% perf list frontend
List of pre-defined events (to be used in -e):
stalled-cycles-frontend OR idle-cycles-frontend [Hardware event]
stalled-cycles-frontend OR cpu/stalled-cycles-frontend/ [Kernel PMU event]
frontend:
dsb2mite_switches.count
[Decode Stream Buffer (DSB)-to-MITE switches]
dsb2mite_switches.penalty_cycles
[Decode Stream Buffer (DSB)-to-MITE switch true penalty cycles]
dsb_fill.exceed_dsb_lines
[Cycles when Decode Stream Buffer (DSB) fill encounter more than 3 Decode Stream Buffer (DSB)
lines]
icache.hit
[Number of Instruction Cache, Streaming Buffer and Victim Cache Reads. both cacheable and
noncacheable, including UC fetches]
...
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/1476902724-9586-2-git-send-email-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Joonwoo reported that there's a mismatch between timestamps in script
and sched commands. This was because of difference in printing the
timestamp. Factor out the code and share it so that they can be in
sync. Also I found that sched map has similar problem, fix it too.
Committer notes:
Fixed the max_lat_at bug introduced by Namhyung's original patch, as
pointed out by Joonwoo, and made it a function following the scnprintf()
model, i.e. returning the number of bytes formatted, and receiving as
the first parameter the object from where the data to the formatting is
obtained, renaming it from:
char *timestamp_in_usec(char *bf, size_t size, u64 timestamp)
to
int timestamp__scnprintf_usec(u64 timestamp, char *bf, size_t size)
Reported-by: Joonwoo Park <joonwoop@codeaurora.org>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20161024020246.14928-3-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
I'd like to see the name of tasks with perf sched map, but it only shows
name of new tasks and then use short names after all. This is not good
for long running tasks since it's hard for users to track the short
names. This patch makes it show the names (except the idle task) when
-v option is used. Probably we may make it as default behavior.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20161024020246.14928-2-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Applying cpu color always doesn't help readability IMHO. Instead it
might be better to applying the color when there's an activity on those
CPUs.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20161024020246.14928-1-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The -i and -v options can be used in subcommands so enable cascading the
sched_options. This fixes the following inconvenience in 'perf sched':
$ perf sched -i perf.data.sched map
... (it works well) ...
$ perf sched map -i perf.data.sched
Error: unknown switch `i'
Usage: perf sched map [<options>]
--color-cpus <cpus>
highlight given CPUs in map
--color-pids <pids>
highlight given pids in map
--compact map output in compact mode
--cpus <cpus> display given CPUs in map
With this patch, the second command line works with the perf.data.sched
data file.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/20161024030003.28534-2-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The perf report/top on TUI supports horizontal scrolling using LEFT and
RIGHT keys.
But it calculate the number of columns incorrectly when hierarchy mode
is enabled so that keep pressing RIGHT key can make the output
disappeared.
In the hierarchy mode, all sort keys are collapsed into a single column,
so it needs to be applied when calculating column numbers.
Reported-and-Tested-by: Markus Trippelsdorf <markus@trippelsdorf.de>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20161024162110.17918-1-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Sebastian noted that overhead for worker thread ops (throughput)
accounting was producing 'perf' to appear in the profiles, consuming a
non-trivial (i.e. 13%) amount of CPU.
This is due to cacheline bouncing due to the increment of w->ops.
We can easily fix this by just working on a local copy and updating the
actual worker once done running, and ready to show the program summary.
There is no danger of the worker being concurrent, so we can trust that
no stale value is being seen by another thread.
This also gets rid of the unnecessary cache alignment hack; its not
worth it.
Reported-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Acked-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: http://lkml.kernel.org/r/1477342613-9938-2-git-send-email-dave@stgolabs.net
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Make the 'perf list' glob matching for vendor events case insensitive.
This allows to use the upper case vendor events with perf list too.
Now the following works:
% perf list LONGEST_LAT
...
cache:
longest_lat_cache.miss
[Core-originated cacheable demand requests missed LLC]
longest_lat_cache.reference
[Core-originated cacheable demand requests that refer to LLC]
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Suggested-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/1476899402-31460-1-git-send-email-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Instead of the one when another syscall takes place while another is being
processed (in another CPU, but we show it serialized, so need to "interrupt"
the other), and also when finally showing the sys_enter + sys_exit + duration,
where we were showing the sample->time for the sys_exit, duh.
Before:
# perf trace sleep 1
<SNIP>
0.373 ( 0.001 ms): close(fd: 3 ) = 0
1000.626 (1000.211 ms): nanosleep(rqtp: 0x7ffd6ddddfb0) = 0
1000.653 ( 0.003 ms): close(fd: 1 ) = 0
1000.657 ( 0.002 ms): close(fd: 2 ) = 0
1000.667 ( 0.000 ms): exit_group( )
#
After:
# perf trace sleep 1
<SNIP>
0.336 ( 0.001 ms): close(fd: 3 ) = 0
0.373 (1000.086 ms): nanosleep(rqtp: 0x7ffe303e9550) = 0
1000.481 ( 0.002 ms): close(fd: 1 ) = 0
1000.485 ( 0.001 ms): close(fd: 2 ) = 0
1000.494 ( 0.000 ms): exit_group( )
[root@jouet linux]#
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-ecbzgmu2ni6glc6zkw8p1zmx@git.kernel.org
Fixes: 752fde44fd ("perf trace: Support interrupted syscalls")
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Not used at all, we need just the entry_time to calculate the syscall
duration.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-js6r09zdwlzecvaei7t4l3vd@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It popped up in perf testing that the worker consumes some amount of
CPU. It boils down to the increment of `ops` which causes cache line
bouncing between the individual threads.
This patch aligns the struct by 256 bytes to ensure that not a cache
line is shared among CPUs. 128 byte is the x86 worst case and grep says
that L1_CACHE_SHIFT is set to 8 on s390.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Davidlohr Bueso <dbueso@suse.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20161016190803.3392-1-bigeasy@linutronix.de
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We already have handling for errors when processing PERF_RECORD_ events,
so instead of calling die() when not being able to alloc, propagate the
error, so that the normal UI exit sequence can take place, the user be
warned and possibly the terminal be properly reset to a sane mode.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Brice Goglin <Brice.Goglin@inria.fr>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-r90je3c009a125dvs3525yge@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It already returns whatever strbuf_(grow|addch)() returns in case of
failure, so just return -ENOSPC in the only case where it was die()ing.
When it returns, its only caller will call die() anyway, so no need to
be so eager, die later.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-as05b7mbogprlwi8iarwns8e@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Instead of having all tests perform alloc/free, do it in the code that
calls the do_cycles() and do_gettimeofday() functions.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-lywj4mbdb1m9x1z9asivwuuy@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In the perf wiki todo-list[1], there is an entry regarding initial-delay
and 'perf trace'; the following small patch tries to fulfill this point.
It has been generated against the branch tip/perf/core.
It has only been implemented in the "trace__run" case.
Ex.:
$ sudo strace -- ./perf trace --delay 5 sleep 1 2>&1
...
fcntl(7, F_SETFL, O_RDONLY|O_NONBLOCK) = 0
ioctl(7, PERF_EVENT_IOC_ID, 0x7ffc8fd35718) = 0
ioctl(11, PERF_EVENT_IOC_SET_OUTPUT, 0x7) = 0
fcntl(11, F_SETFL, O_RDONLY|O_NONBLOCK) = 0
ioctl(11, PERF_EVENT_IOC_ID, 0x7ffc8fd35718) = 0
write(6, "\0", 1) = 1
close(6) = 0
nanosleep({0, 5000000}, NULL) = 0 # DELAY OF 5 MS BEFORE ENABLING THE EVENTS
ioctl(3, PERF_EVENT_IOC_ENABLE, 0) = 0
ioctl(4, PERF_EVENT_IOC_ENABLE, 0) = 0
ioctl(5, PERF_EVENT_IOC_ENABLE, 0) = 0
ioctl(7, PERF_EVENT_IOC_ENABLE, 0) = 0
...
[1]: https://perf.wiki.kernel.org/index.php/Todo
Signed-off-by: Alexis Berlemont <alexis.berlemont@gmail.com>
Suggested-and-Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20161010054328.4028-2-alexis.berlemont@gmail.com
[ Add entry to the manpage, cut'n'pasted from stat's and record's ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Here is a small patch which tries to fulfill a point in the perf todo
list:
* Make pressing 'V' multiple times to go on cycling thru various
verbosity levels in 'perf top', so that info that is present in
'perf top -v' can be obtained without having to restart the tool
(acme).
After a small grep in the code, the max verbosity level seems 3; so,
we cycle at 4; I did not dare define a MAX_VERBOSE_LEVEL constant.
Signed-off-by: Alexis Berlemont <alexis.berlemont@gmail.com>
Suggested-and-Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20161012214823.14324-2-alexis.berlemont@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The latter version occurs much more when running git grep.
Signed-off-by: Alexander Alemayhu <alexander@alemayhu.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/20161013161811.4939-1-alexander@alemayhu.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
With uncore event aliases which are duplicated over multiple PMUs the
"Using CPUID" message with -v could be printed many times. Only print
it once.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/1476393332-20732-3-git-send-email-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch adds a formal specification of the jitdump format. The goal
is to help jit runtime developers implement the jitdump support without
having to read the jvmti code.
Signed-off-by: Stephane Eranian <eranian@google.com>
Cc: Anton Blanchard <anton@ozlabs.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1476356383-30100-10-git-send-email-eranian@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Check the version number when opening a jitdump file. Accept older
versions, but not newer ones.
Signed-off-by: Stefano Sanfilippo <ssanfilippo@chromium.org>
Signed-off-by: Ross McIlroy <rmcilroy@chromium.org>
Reviewed-by: Stephane Eranian <eranian@google.com>
Cc: Anton Blanchard <anton@ozlabs.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1476356383-30100-9-git-send-email-eranian@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When the jit_buf_desc contains unwinding information, it is emitted as
eh_frame unwinding sections in the DSOs generated by perf inject.
The unwinding information is required to unwind of JITed code which do
not maintain the frame pointer register during function calls. It can
be emitted by V8 / Chromium when the --perf_prof_unwinding_info is
passed to V8.
The eh_frame and eh_frame_hdr sections are emitted immediately after the
.text.
The .eh_frame is aligned at a 8-byte boundary, and .eh_frame_hdr at a
4-byte one. Since size of the .eh_frame is required to be a multiple of
the word size, which means there will never be additional padding
between it and the .eh_frame_hdr on machines where the word size is 4 or
8 bytes.
However, additional padding might be inserted between .text and
.eh_frame to reach the correct alignment, which will always be 8 bytes,
also on 32bit machines. The reasoning behind this choice is that 4 extra
bytes of padding worst case are not a large cost for the advantage of
removing word-size dependent offset calculations when emitting the
jitdump.
Signed-off-by: Stefano Sanfilippo <ssanfilippo@chromium.org>
Signed-off-by: Ross McIlroy <rmcilroy@chromium.org>
Reviewed-by: Stephane Eranian <eranian@google.com>
Cc: Anton Blanchard <anton@ozlabs.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1476356383-30100-8-git-send-email-eranian@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This record is intended to provide unwinding information in the
eh_frame format. This is required to unwind JITed code which
does not maintain the frame pointer register during function calls.
The eh_frame unwinding information can be emitted by V8 / Chromium
when the --perf_prof_unwinding_info is passed.
A record of type jr_code_unwinding_info comes before the jr_code_load
it referred to and contains both the .eh_frame and .eh_frame_hdr.
The fields in the header have the following meaning:
* unwinding_size: size of the eh_frame and eh_frame_hdr, necessary
for distinguishing the content from the padding.
* eh_frame_hdr_size: as the name says.
* mapped_size: size of the payload that was in memory at runtime.
typically unwinding_size if the .eh_frame_hdr and .eh_frame were
mapped, or 0 if they weren't. It should always be the former case,
since the .eh_frame is guaranteed to be mapped in memory. However,
certain JITs might want to inject an .eh_frame_hdr with an empty LUT
to trigger fp-based unwinding fallback in libunwind. The only part
of the .eh_frame_hdr that libunwind reads from remote memory is the
LUT, and since there is none, mapping the unwinding info in memory
is not necessary, and 0 in this field signifies that it wasn't.
This practical hack allows to save bytes in code memory for those
JIT compilers that might or might not maintain a valid frame pointer.
The payload that follows is assumed to contain first the .eh_frame and
then the .eh_header_hdr, with no padding between the two.
Signed-off-by: Stefano Sanfilippo <ssanfilippo@chromium.org>
Signed-off-by: Ross McIlroy <rmcilroy@chromium.org>
Reviewed-by: Stephane Eranian <eranian@google.com>
Cc: Anton Blanchard <anton@ozlabs.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1476356383-30100-7-git-send-email-eranian@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When calculating .eh_frame_hdr base and LUT offsets do not always assume
that pgoff is zero.
The assumption is false for DSOs built from the jitdump by perf inject,
because the ELF header did not exist in memory at sampling time.
Signed-off-by: Stefano Sanfilippo <ssanfilippo@chromium.org>
Signed-off-by: Ross McIlroy <rmcilroy@chromium.org>
Reviewed-by: Stephane Eranian <eranian@google.com>
Cc: Anton Blanchard <anton@ozlabs.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1476356383-30100-6-git-send-email-eranian@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The behavior before this commit was to skip the remaining portion of the
jitdump in case an unknown record was found, including those records
that perf could handle.
With this change, parsing a record with an unknown id will cause a
warning to be emitted, the record will be skipped and parsing will
resume from the next (valid) one.
The patch aims at making perf more future proof, by extracting as much
information as possible from jitdumps.
Signed-off-by: Stefano Sanfilippo <ssanfilippo@chromium.org>
Signed-off-by: Ross McIlroy <rmcilroy@chromium.org>
Reviewed-by: Stephane Eranian <eranian@google.com>
Cc: Anton Blanchard <anton@ozlabs.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1476356383-30100-5-git-send-email-eranian@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch removes all the string padding generated in the jitdump file.
They are not necessary and were adding unnecessary complexity. Modern
processors can handle unaligned accesses quite well. The perf.data/
jitdump file are always post-processed, no need to add extra complexity
for no real gain.
Signed-off-by: Stephane Eranian <eranian@google.com>
Cc: Anton Blanchard <anton@ozlabs.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1476356383-30100-4-git-send-email-eranian@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch modifies the build dependencies on the jitdump support in
perf. As it stands jitdump was wrongfully made dependent 100% on using
DWARF. However, the dwarf dependency, only exist if generating the
source line table in genelf_debug.c. The rest of the support does not
need DWARF.
This patch removes the dependency on DWARF for the entire jitdump
support. It keeps it only for the genelf_debug.c support.
Signed-off-by: Maciej Debski <maciejd@google.com>
Reviewed-by: Stephane Eranian <eranian@google.com>
Cc: Anton Blanchard <anton@ozlabs.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1476356383-30100-3-git-send-email-eranian@google.com
Fixes: e12b202f8f ("perf jitdump: Build only on supported archs")
[ Make it build only if NO_LIBELF isn't defined, as jitdump.o will only be built in that case ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch improves the usefulness of error messages generated by the
JVMTI interfac.e This can help identify the root cause of a problem by
printing the actual error code. The patch adds a new helper function
called print_error().
Signed-off-by: Stephane Eranian <eranian@google.com>
Cc: Anton Blanchard <anton@ozlabs.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nilay Vaish <nilayvaish@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1476356383-30100-2-git-send-email-eranian@google.com
[ Handle failure to convert numeric error to a string in print_error() ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Such as CentOS5, where such define is not present in elf.h.
This file, genelf.c, wasn't being built for several systems, because
it mistakenly was conditional on some DWARF features, now that it
is just needing libelf, after "perf jit: Enable jitdump support without
dwarf" it fails.
So, as preparation for "perf jit: Enable jitdump support without dwarf",
conditionally define it, if not available.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Anton Blanchard <anton@ozlabs.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Maciej Debski <maciejd@google.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-k09qay1cmr0l3fzprmztzy3o@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When the loop body isn't executed at all, then the 'ret' local variable,
that is uninitialized will be used as the return value.
This triggers this error on Alpine Linux:
CC /tmp/build/perf/util/demangle-java.o
CC /tmp/build/perf/util/demangle-rust.o
CC /tmp/build/perf/util/jitdump.o
CC /tmp/build/perf/util/genelf.o
util/jitdump.c: In function 'jit_process':
util/jitdump.c:622:3: error: 'ret' may be used uninitialized in this function [-Werror=maybe-uninitialized]
fprintf(stderr, "injected: %s (%d)\n", path, ret);
^
util/jitdump.c:584:6: note: 'ret' was declared here
int ret;
^
FLEX /tmp/build/perf/util/parse-events-flex.c
/ $ gcc -v
Using built-in specs.
COLLECT_GCC=gcc
COLLECT_LTO_WRAPPER=/usr/libexec/gcc/x86_64-alpine-linux-musl/5.3.0/lto-wrapper
Target: x86_64-alpine-linux-musl
Configured with: /home/buildozer/aports/main/gcc/src/gcc-5.3.0/configure --prefix=/usr --mandir=/usr/share/man --infodir=/usr/share/info
+--build=x86_64-alpine-linux-musl --host=x86_64-alpine-linux-musl --target=x86_64-alpine-linux-musl --with-pkgversion='Alpine 5.3.0' --enable-checking=release
+--disable-fixed-point --disable-libstdcxx-pch --disable-multilib --disable-nls --disable-werror --disable-symvers --enable-__cxa_atexit --enable-esp
+--enable-cloog-backend --enable-languages=c,c++,objc,java,fortran,ada --disable-libssp --disable-libmudflap --disable-libsanitizer --enable-shared
+--enable-threads --enable-tls --with-system-zlib
Thread model: posix
gcc version 5.3.0 (Alpine 5.3.0)
But this so far got under the radar, not causing any build problem, till the
"perf jit: enable jitdump support without dwarf" gets applied, when the above
problem takes place, some combination of inlining or whatever, the problem
is real, so fix it by initializing the variable to zero.
Cc: Anton Blanchard <anton@ozlabs.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Maciej Debski <maciejd@google.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lkml.kernel.org/r/20161013200437.GA12815@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It can be useful to specify branch type state per event, for example if
we want to collect both software trace points and last branch PMU events
in a single collection. Currently this doesn't work because the software
trace point errors out with -b.
There was already a branch-type parameter to configure branch sample
types per event in the parser, but it was stubbed out. This patch
implements the necessary plumbing to actually enable it.
Now:
$ perf record -e sched:sched_switch,cpu/cpu-cycles,branch_type=any/ ...
works.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/1476306127-19721-1-git-send-email-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
- Some editing (params -> parameters)
- Point to the now more complete list of parameters in the perf list
manpage.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/1476381433-22959-1-git-send-email-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Display name of feature instead of just the number
during recording data.
Before:
failed to write feature 13
Now:
failed to write feature HEADER_CPU_TOPOLOGY
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-k9d9trozi5kkx737cy8n5xh5@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Display missing features in header info, like:
$ perf report --header-only
# ========
# captured on: Mon Oct 10 09:39:47 2016
...
# missing features: HEADER_TRACING_DATA HEADER_CPU_TOPOLOGY ...
To help in diagnosing problems.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-bh5gp84gobdmyl345dcp64se@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It's not displayed in TUI now, putting it into generic part.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-5fk88kejqgi50ye7xdkhiloz@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adding for_each_clear_bit macro plus all its the necessary backbone
functions. Taken from related kernel code. It will be used in following
patch.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-cayv2zbqi0nlmg5sjjxs1775@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To get up to the recent compat pread/pwrite changes, that albeit not
being used by 'perf trace' due to some raw_syscalls tracepoint
limitations, trigger this warning when building perf:
Warning: x86_64's syscall_64.tbl differs from kernel
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-ilgqhxd9ubkg5f66bx0bht2t@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Change Intel PT and BTS to pass up the length and the instruction
bytes of the decoded or sampled instruction in the perf sample.
The decoder already knows this information, we just need to pass it
up. Since it is only a couple of movs it is not very expensive.
Handle instruction cache too. Make sure ilen is always initialized.
Used in the next patch.
[Adrian: re-base on top (and adjust for) instruction buffer size tidy-up]
[Adrian: add BTS support and adjust commit message accordingly]
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Link: http://lkml.kernel.org/r/1475847747-30994-3-git-send-email-adrian.hunter@intel.com
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tidy instruction buffer size usage in preparation for copying the
instruction bytes onto samples.
The instruction buffer is presently used for debugging, so rename its
size macro from INTEL_PT_INSN_DBG_BUF_SZ to INTEL_PT_INSN_BUF_SZ, and
use it everywhere.
Note that the maximum instruction size is 15 which is a less efficient size
to copy than 16, which is why a separate buffer size is used.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Link: http://lkml.kernel.org/r/1475847747-30994-2-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Normally we limit the main list to contain only entries with HITM %
value > 0.0005, but it might be useful to display all captured entries.
Adding --show-all option for that.
Requested-and-Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Joe Mario <jmario@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/n/tip-nokgjdwikbegec5jzj4mxhqc@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add a possibility to disable source line column with new --no-source
option. It source line data could take lot of time to retrieve, so it
could be a performance burden for big data.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Joe Mario <jmario@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/n/tip-8p6s2727fq8nbsm3it5gix3p@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add man page for c2c command and credits to builtin-c2c.c file.
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Joe Mario <jmario@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/n/tip-twbp391v8v9f5idp584hlfov@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adding help windows to display key/action mappings
for both browsers.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Joe Mario <jmario@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/n/tip-zni4apopx6a9eyxsosm1ebh1@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adding TUI support to switch between Node entry versions
in real time with 'n' key.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Joe Mario <jmario@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/n/tip-xqbw4h4dxig54wff7fd14lao@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The width of symbol and source line entries could get really long
and not convenient to display. Adding support to display only
patrt of such strings and possibility to switch to full length
by uing --full-symbols option or 's' key in TUI browser.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Joe Mario <jmario@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/n/tip-yxf5hfteyfaoi8xrgczqtyha@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Using resort callbacks to compute the columns' width.
Computing only the global ones, c2c entries have fixed width only.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Joe Mario <jmario@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/n/tip-zyayvq2u3dzyf3y7i9jza0lw@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Allowing user to configure the way the single cacheline
data are sorted after being sorted by offset.
Adding 'c' option to specify sorting fields for single cacheline:
-c, --coalesce <coalesce fields>
coalesce fields: pid,tid,iaddr,dso
It's allowed to use following combination of fields:
pid - process pid
tid - process tid
iaddr - code address
dso - shared object
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Joe Mario <jmario@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/n/tip-aka8z31umxoq2gqr5mjd81zr@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently we sort and limit displayed data based on the remote HITMs
count. Adding support to switch to local HITMs via --display option:
--display ... lcl,rmt
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Joe Mario <jmario@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/n/tip-inykbom2f19difvsu1e18avr@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add a limit for entries number of the cachelines table entries. By
default now it's the 0.0005% minimum of remote HITMs.
Also display only cachelines with remote hitm or store data.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Joe Mario <jmario@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/n/tip-inykbom2f19difvsu1e18avr@git.kernel.org
[ Disabled for now ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Display global shared cachelines related stats table as part of the
stdio output or when --stats option is speicified:
$ perf c2c report --stats
...
=================================================
Global Shared Cache Line Event Information
=================================================
Total Shared Cache Lines : 1384
Load HITs on shared lines : 5995
Fill Buffer Hits on shared lines : 1726
L1D hits on shared lines : 1943
L2D hits on shared lines : 0
LLC hits on shared lines : 1360
Locked Access on shared lines : 1993
Store HITs on shared lines : 1504
Store L1D hits on shared lines : 1446
Total Merged records : 3527
Original-patch-by: Dick Fowles <rfowles@redhat.com>
Original-patch-by: Don Zickus <dzickus@redhat.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Joe Mario <jmario@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/n/tip-p0gty8ctbdzisrniwqxhqmhq@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Display global stats table as part of the stdio output
or when --stats option is speicified:
$ perf c2c report --stats
=================================================
Trace Event Information
=================================================
Total records : 41237
Locked Load/Store Operations : 4075
Load Operations : 20526
Loads - uncacheable : 0
Loads - IO : 0
Loads - Miss : 552
Loads - no mapping : 31
Load Fill Buffer Hit : 7333
Load L1D hit : 6398
Load L2D hit : 144
Load LLC hit : 4889
Load Local HITM : 1185
Load Remote HITM : 838
Load Remote HIT : 52
Load Local DRAM : 183
Load Remote DRAM : 106
Load MESI State Exclusive : 289
Load MESI State Shared : 0
Load LLC Misses : 1179
LLC Misses to Local DRAM : 15.5%
LLC Misses to Remote DRAM : 9.0%
LLC Misses to Remote cache (HIT) : 4.4%
LLC Misses to Remote cache (HITM) : 71.1%
Store Operations : 20711
Store - uncacheable : 0
Store - no mapping : 1
Store L1D Hit : 20158
Store L1D Miss : 552
No Page Map Rejects : 7
Unable to parse data source : 0
Original-patch-by: Dick Fowles <rfowles@redhat.com>
Original-patch-by: Don Zickus <dzickus@redhat.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Joe Mario <jmario@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/n/tip-qkyvao3qsrnwazf0w1jvsh7z@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adding simple TUI cacheline browser. It triggers when you press 'd' in
the main browser on the specific cacheline.
It allows to navigate through cacheline's offsets and display callchains
(implemented in following patches).
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Joe Mario <jmario@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/n/tip-fovjwgyusv3rz5qxk3hnahtl@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add the main cachelines TUI browser. It allows to navigate through
cachelines and display their details and callchains (implemented in the
following patches).
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Joe Mario <jmario@redhat.com>
Cc: Kim Phillips <kim.phillips@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/n/tip-pk632k4h1uwc5t0lqc7k61zg@git.kernel.org
Link: http://lkml.kernel.org/r/20161021001706.GB23970@krava
[ Handle file with no entries, fixing segfault reported by Kim Phillips ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Set resort/display fields for both cachelines and single cacheline
displays.
Cachelines are sorted on:
rmt_hitm
will be made configurable in following patches.
Following fields are display for cachelines:
dcacheline
tot_recs
percent_hitm
tot_hitm,lcl_hitm,rmt_hitm
stores,stores_l1hit,stores_l1miss
dram_lcl,dram_rmt
ld_llcmiss
tot_loads
ld_fbhit,ld_l1hit,ld_l2hit
ld_lclhit,ld_rmthit
The single cacheline is sort by:
offset,rmt_hitm,lcl_hitm
will be made configurable in following patches.
Following fields are display for each cacheline:
percent_rmt_hitm
percent_lcl_hitm
percent_stores_l1hit
percent_stores_l1miss
offset
pid
tid
mean_rmt
mean_lcl
mean_load
cpucnt
symbol
dso
node
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Joe Mario <jmario@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/n/tip-0rclftliywdq9qr2sjbugb6b@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Allow to setup number of header lines for c2c hists objects.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Joe Mario <jmario@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/n/tip-4ilsf0ulubrd4y96g7tnpwzk@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It is to be displayed in the single cacheline output:
cl_srcline
It displays source line related to the code address that accessed
cacheline. It's a wrapper to global srcline sort entry.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Joe Mario <jmario@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/n/tip-cmnzgm37mjz56ozsg4mnbgxq@git.kernel.org
[ Remove __maybe_unused from now used 'he' parameter in filter_cb() ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It is to be displayed in the single cacheline output:
cpucnt
It displays number of distinct cpus that hit cacheline.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Joe Mario <jmario@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/n/tip-ib2kdwam52fby9u2k3ij6lhm@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It is to be displayed in the single cacheline output:
median, mean_rmt, mean_lcl, mean_load, stddev
It displays statistics hits related to cacheline accesses.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Joe Mario <jmario@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/n/tip-m1r4uc9lcykf1jhpvwk2gkj8@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It is to be displayed in the single cacheline output:
node
It displays nodes hits related to cacheline accesses.
The node filed comes in 3 flavors:
- node IDs separated by ','
- node IDs with stats for each ID, in following format:
Node{cpus %hitms %stores}
- node IDs with list of affected CPUs in following format:
Node{cpu list}
User can switch the flavor with -N option (-NN,-NNN).
It will be available in TUI to switch this with 'n' key.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Joe Mario <jmario@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/n/tip-6742e6g0r7n63y5wc4rrgxx5@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
They are to be displayed in the single cacheline output:
symbol, dso
They are wrappers for global sort_sym and sort_dso sort entries with c2c
specific headers.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Joe Mario <jmario@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/n/tip-6742e6g0r7n63y5wc4rrgxx5@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It is to be displayed in the single cacheline output:
tid
It's a wrapper for global sort_thread sort entry with c2c specific
header.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Joe Mario <jmario@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/n/tip-fr0socae5skzvz5qbkl85prn@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It is to be displayed in the single cacheline output:
pid
We currently don't have a single 'pid' sort/display entry, which would
output just pid number, hence adding it into c2c code.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Joe Mario <jmario@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/n/tip-3o23qrspxc99b04ci1swlzr6@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
They are to be displayed in the main cachelines overall output:
dram_lcl, dram_rmt
They display DRAM rmt/lcl access numbers for specific cacheline.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Joe Mario <jmario@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/n/tip-tl3qqi9ehk6g1fla4z7y0ykd@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
They are to be displayed in the single cacheline output:
percent_rmt_hitm, percent_lcl_hitm, percent_stores_l1hit, percent_stores_l1miss
They display percentage of HITMs/stores for specific offset in the
cacheline.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Joe Mario <jmario@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/n/tip-t365aosxtdut8sgrgn8mfoe4@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It is to be displayed in the main cachelines overall output:
percent_hitm
It displays HITMs percentage for cacheline.
It counts remote HITMs at the moment, but it is changed later to support
local as well, based on the sort configuration.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Joe Mario <jmario@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/n/tip-czd17qsh5u5z0yc1estz9l2y@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It is to be displayed in the main cachelines overall output:
tot_loads
It displays sum of all load accesses for cacheline.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Joe Mario <jmario@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/n/tip-czd17qsh5u5z0yc1estz9l2y@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It is to be displayed in the main cachelines overall output:
tot_recs
It displays sum of all cachelines accesses.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Joe Mario <jmario@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/n/tip-wojujik7zzen770mxn295mxa@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It is to be displayed in the main cachelines overall output:
ld_llcmiss
It displays bare number of LLC misses for cacheline.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Joe Mario <jmario@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/n/tip-wojujik7zzen770mxn295mxa@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add 2 LLC load related dimension key wrappers.
They are to be displayed in the main cachelines overall output:
ld_lclhit, ld_rmthit
They display bare numbers of LLC and remote loads for cacheline.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Joe Mario <jmario@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/n/tip-ahjg0voaufefboemjuj9yefh@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add 3 loads related dimension key wrappers.
They are to be displayed in the main cachelines overall output:
ld_fbhit, ld_l1hit, ld_l2hit
They all display bare numbers of loads for
FB (Fill Buffer), L1 and L2 cache.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Joe Mario <jmario@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/n/tip-wxrzhy74zl8fvkvgjae3w1ju@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add 5 stores related dimension key wrappers.
First 3 are to be displayed in the main cachelines overall output:
stores, stores_l1hit, stores_l1miss
The latter 2 are to be displayed within single cacheline output:
cl_stores_l1hit, cl_stores_l1miss
They all display bare numbers of stores for cacheline or its related
offsets.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Joe Mario <jmario@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/n/tip-qeml8v53v6q3wl5n8vgbf64r@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adding 5 hitm related dimension key wrappers.
First 3 are to be displayed in the main cachelines overall output:
tot_hitm, lcl_hitm, rmt_hitm
The latter 2 are to be displayed within single cacheline output:
cl_rmt_hitm, cl_lcl_hitm
They all display bare numbers of remote/local/total HITMs for cacheline
or its related offsets.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Joe Mario <jmario@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/n/tip-iju5239xa5heqqben65g1u7e@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
