mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-04 09:34:12 +08:00
36268983e9
28338 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Justin Iurman
|
afa114d987 |
selftests: net: ioam: expect support for Queue depth data
The IOAM queue-depth data field was added a few weeks ago,
but the test unit was not updated accordingly.
Reported-by: kernel test robot <oliver.sang@intel.com>
Fixes:
|
||
Paolo Abeni
|
9846921dba |
selftests: mptcp: fix ipv6 routing setup
MPJ ipv6 selftests currently lack per link route to the server
net. Additionally, ipv6 subflows endpoints are created without any
interface specified. The end-result is that in ipv6 self-tests
subflows are created all on the same link, leading to expected delays
and sporadic self-tests failures.
Fix the issue by adding the missing setup bits.
Fixes:
|
||
Linus Torvalds
|
fa2e1ba3e9 |
Networking fixes for 5.17-rc1, including fixes from netfilter, bpf.
Current release - regressions:
- fix memory leaks in the skb free deferral scheme if upper layer
protocols are used, i.e. in-kernel TCP readers like TLS
Current release - new code bugs:
- nf_tables: fix NULL check typo in _clone() functions
- change the default to y for Vertexcom vendor Kconfig
- a couple of fixes to incorrect uses of ref tracking
- two fixes for constifying netdev->dev_addr
Previous releases - regressions:
- bpf:
- various verifier fixes mainly around register offset handling
when passed to helper functions
- fix mount source displayed for bpffs (none -> bpffs)
- bonding:
- fix extraction of ports for connection hash calculation
- fix bond_xmit_broadcast return value when some devices are down
- phy: marvell: add Marvell specific PHY loopback
- sch_api: don't skip qdisc attach on ingress, prevent ref leak
- htb: restore minimal packet size handling in rate control
- sfp: fix high power modules without diagnostic monitoring
- mscc: ocelot:
- don't let phylink re-enable TX PAUSE on the NPI port
- don't dereference NULL pointers with shared tc filters
- smsc95xx: correct reset handling for LAN9514
- cpsw: avoid alignment faults by taking NET_IP_ALIGN into account
- phy: micrel: use kszphy_suspend/_resume for irq aware devices,
avoid races with the interrupt
Previous releases - always broken:
- xdp: check prog type before updating BPF link
- smc: resolve various races around abnormal connection termination
- sit: allow encapsulated IPv6 traffic to be delivered locally
- axienet: fix init/reset handling, add missing barriers,
read the right status words, stop queues correctly
- add missing dev_put() in sock_timestamping_bind_phc()
Misc:
- ipv4: prevent accidentally passing RTO_ONLINK to
ip_route_output_key_hash() by sanitizing flags
- ipv4: avoid quadratic behavior in netns dismantle
- stmmac: dwmac-oxnas: add support for OX810SE
- fsl: xgmac_mdio: add workaround for erratum A-009885
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=XM4Y
-----END PGP SIGNATURE-----
Merge tag 'net-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from netfilter, bpf.
Quite a handful of old regression fixes but most of those are
pre-5.16.
Current release - regressions:
- fix memory leaks in the skb free deferral scheme if upper layer
protocols are used, i.e. in-kernel TCP readers like TLS
Current release - new code bugs:
- nf_tables: fix NULL check typo in _clone() functions
- change the default to y for Vertexcom vendor Kconfig
- a couple of fixes to incorrect uses of ref tracking
- two fixes for constifying netdev->dev_addr
Previous releases - regressions:
- bpf:
- various verifier fixes mainly around register offset handling
when passed to helper functions
- fix mount source displayed for bpffs (none -> bpffs)
- bonding:
- fix extraction of ports for connection hash calculation
- fix bond_xmit_broadcast return value when some devices are down
- phy: marvell: add Marvell specific PHY loopback
- sch_api: don't skip qdisc attach on ingress, prevent ref leak
- htb: restore minimal packet size handling in rate control
- sfp: fix high power modules without diagnostic monitoring
- mscc: ocelot:
- don't let phylink re-enable TX PAUSE on the NPI port
- don't dereference NULL pointers with shared tc filters
- smsc95xx: correct reset handling for LAN9514
- cpsw: avoid alignment faults by taking NET_IP_ALIGN into account
- phy: micrel: use kszphy_suspend/_resume for irq aware devices,
avoid races with the interrupt
Previous releases - always broken:
- xdp: check prog type before updating BPF link
- smc: resolve various races around abnormal connection termination
- sit: allow encapsulated IPv6 traffic to be delivered locally
- axienet: fix init/reset handling, add missing barriers, read the
right status words, stop queues correctly
- add missing dev_put() in sock_timestamping_bind_phc()
Misc:
- ipv4: prevent accidentally passing RTO_ONLINK to
ip_route_output_key_hash() by sanitizing flags
- ipv4: avoid quadratic behavior in netns dismantle
- stmmac: dwmac-oxnas: add support for OX810SE
- fsl: xgmac_mdio: add workaround for erratum A-009885"
* tag 'net-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (92 commits)
ipv4: add net_hash_mix() dispersion to fib_info_laddrhash keys
ipv4: avoid quadratic behavior in netns dismantle
net/fsl: xgmac_mdio: Fix incorrect iounmap when removing module
powerpc/fsl/dts: Enable WA for erratum A-009885 on fman3l MDIO buses
dt-bindings: net: Document fsl,erratum-a009885
net/fsl: xgmac_mdio: Add workaround for erratum A-009885
net: mscc: ocelot: fix using match before it is set
net: phy: micrel: use kszphy_suspend()/kszphy_resume for irq aware devices
net: cpsw: avoid alignment faults by taking NET_IP_ALIGN into account
nfc: llcp: fix NULL error pointer dereference on sendmsg() after failed bind()
net: axienet: increase default TX ring size to 128
net: axienet: fix for TX busy handling
net: axienet: fix number of TX ring slots for available check
net: axienet: Fix TX ring slot available check
net: axienet: limit minimum TX ring size
net: axienet: add missing memory barriers
net: axienet: reset core on initialization prior to MDIO access
net: axienet: Wait for PhyRstCmplt after core reset
net: axienet: increase reset timeout
bpf, selftests: Add ringbuf memory type confusion test
...
|
||
|
Linus Torvalds
|
f4484d138b |
Merge branch 'akpm' (patches from Andrew)
Merge more updates from Andrew Morton: "55 patches. Subsystems affected by this patch series: percpu, procfs, sysctl, misc, core-kernel, get_maintainer, lib, checkpatch, binfmt, nilfs2, hfs, fat, adfs, panic, delayacct, kconfig, kcov, and ubsan" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (55 commits) lib: remove redundant assignment to variable ret ubsan: remove CONFIG_UBSAN_OBJECT_SIZE kcov: fix generic Kconfig dependencies if ARCH_WANTS_NO_INSTR lib/Kconfig.debug: make TEST_KMOD depend on PAGE_SIZE_LESS_THAN_256KB btrfs: use generic Kconfig option for 256kB page size limit arch/Kconfig: split PAGE_SIZE_LESS_THAN_256KB from PAGE_SIZE_LESS_THAN_64KB configs: introduce debug.config for CI-like setup delayacct: track delays from memory compact Documentation/accounting/delay-accounting.rst: add thrashing page cache and direct compact delayacct: cleanup flags in struct task_delay_info and functions use it delayacct: fix incomplete disable operation when switch enable to disable delayacct: support swapin delay accounting for swapping without blkio panic: remove oops_id panic: use error_report_end tracepoint on warnings fs/adfs: remove unneeded variable make code cleaner FAT: use io_schedule_timeout() instead of congestion_wait() hfsplus: use struct_group_attr() for memcpy() region nilfs2: remove redundant pointer sbufs fs/binfmt_elf: use PT_LOAD p_align values for static PIE const_structs.checkpatch: add frequently used ops structs ... |
||
wangyong
|
5bf1828153 |
delayacct: track delays from memory compact
Delay accounting does not track the delay of memory compact. When there
is not enough free memory, tasks can spend a amount of their time
waiting for compact.
To get the impact of tasks in direct memory compact, measure the delay
when allocating memory through memory compact.
Also update tools/accounting/getdelays.c:
/ # ./getdelays_next -di -p 304
print delayacct stats ON
printing IO accounting
PID 304
CPU count real total virtual total delay total delay average
277 780000000 849039485 18877296 0.068ms
IO count delay total delay average
0 0 0ms
SWAP count delay total delay average
0 0 0ms
RECLAIM count delay total delay average
5 11088812685 2217ms
THRASHING count delay total delay average
0 0 0ms
COMPACT count delay total delay average
3 72758 0ms
watch: read=0, write=0, cancelled_write=0
Link: https://lkml.kernel.org/r/1638619795-71451-1-git-send-email-wang.yong12@zte.com.cn
Signed-off-by: wangyong <wang.yong12@zte.com.cn>
Reviewed-by: Jiang Xuexin <jiang.xuexin@zte.com.cn>
Reviewed-by: Zhang Wenya <zhang.wenya1@zte.com.cn>
Reviewed-by: Yang Yang <yang.yang29@zte.com.cn>
Reviewed-by: Balbir Singh <bsingharora@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
||
Isabella Basso
|
fd0a146240 |
hash.h: remove unused define directive
Patch series "test_hash.c: refactor into KUnit", v3. We refactored the lib/test_hash.c file into KUnit as part of the student group LKCAMP [1] introductory hackathon for kernel development. This test was pointed to our group by Daniel Latypov [2], so its full conversion into a pure KUnit test was our goal in this patch series, but we ran into many problems relating to it not being split as unit tests, which complicated matters a bit, as the reasoning behind the original tests is quite cryptic for those unfamiliar with hash implementations. Some interesting developments we'd like to highlight are: - In patch 1/5 we noticed that there was an unused define directive that could be removed. - In patch 4/5 we noticed how stringhash and hash tests are all under the lib/test_hash.c file, which might cause some confusion, and we also broke those kernel config entries up. Overall KUnit developments have been made in the other patches in this series: In patches 2/5, 3/5 and 5/5 we refactored the lib/test_hash.c file so as to make it more compatible with the KUnit style, whilst preserving the original idea of the maintainer who designed it (i.e. George Spelvin), which might be undesirable for unit tests, but we assume it is enough for a first patch. This patch (of 5): Currently, there exist hash_32() and __hash_32() functions, which were introduced in a patch [1] targeting architecture specific optimizations. These functions can be overridden on a per-architecture basis to achieve such optimizations. They must set their corresponding define directive (HAVE_ARCH_HASH_32 and HAVE_ARCH__HASH_32, respectively) so that header files can deal with these overrides properly. As the supported 32-bit architectures that have their own hash function implementation (i.e. m68k, Microblaze, H8/300, pa-risc) have only been making use of the (more general) __hash_32() function (which only lacks a right shift operation when compared to the hash_32() function), remove the define directive corresponding to the arch-specific hash_32() implementation. [1] https://lore.kernel.org/lkml/20160525073311.5600.qmail@ns.sciencehorizons.net/ [akpm@linux-foundation.org: hash_32_generic() becomes hash_32()] Link: https://lkml.kernel.org/r/20211208183711.390454-1-isabbasso@riseup.net Link: https://lkml.kernel.org/r/20211208183711.390454-2-isabbasso@riseup.net Reviewed-by: David Gow <davidgow@google.com> Tested-by: David Gow <davidgow@google.com> Co-developed-by: Augusto Durães Camargo <augusto.duraes33@gmail.com> Signed-off-by: Augusto Durães Camargo <augusto.duraes33@gmail.com> Co-developed-by: Enzo Ferreira <ferreiraenzoa@gmail.com> Signed-off-by: Enzo Ferreira <ferreiraenzoa@gmail.com> Signed-off-by: Isabella Basso <isabbasso@riseup.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Brendan Higgins <brendanhiggins@google.com> Cc: Daniel Latypov <dlatypov@google.com> Cc: Shuah Khan <skhan@linuxfoundation.org> Cc: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com> Cc: kernel test robot <lkp@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Yafang Shao
|
3087c61ed2 |
tools/testing/selftests/bpf: replace open-coded 16 with TASK_COMM_LEN
As the sched:sched_switch tracepoint args are derived from the kernel, we'd better make it same with the kernel. So the macro TASK_COMM_LEN is converted to type enum, then all the BPF programs can get it through BTF. The BPF program which wants to use TASK_COMM_LEN should include the header vmlinux.h. Regarding the test_stacktrace_map and test_tracepoint, as the type defined in linux/bpf.h are also defined in vmlinux.h, so we don't need to include linux/bpf.h again. Link: https://lkml.kernel.org/r/20211120112738.45980-8-laoar.shao@gmail.com Signed-off-by: Yafang Shao <laoar.shao@gmail.com> Acked-by: Andrii Nakryiko <andrii@kernel.org> Acked-by: David Hildenbrand <david@redhat.com> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Arnaldo Carvalho de Melo <arnaldo.melo@gmail.com> Cc: Andrii Nakryiko <andrii.nakryiko@gmail.com> Cc: Michal Miroslaw <mirq-linux@rere.qmqm.pl> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Matthew Wilcox <willy@infradead.org> Cc: David Hildenbrand <david@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Kees Cook <keescook@chromium.org> Cc: Petr Mladek <pmladek@suse.com> Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com> Cc: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Yafang Shao
|
4cfb943537 |
tools/bpf/bpftool/skeleton: replace bpf_probe_read_kernel with bpf_probe_read_kernel_str to get task comm
bpf_probe_read_kernel_str() will add a nul terminator to the dst, then we don't care about if the dst size is big enough. Link: https://lkml.kernel.org/r/20211120112738.45980-7-laoar.shao@gmail.com Signed-off-by: Yafang Shao <laoar.shao@gmail.com> Acked-by: Andrii Nakryiko <andrii@kernel.org> Reviewed-by: David Hildenbrand <david@redhat.com> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Arnaldo Carvalho de Melo <arnaldo.melo@gmail.com> Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com> Cc: Andrii Nakryiko <andrii.nakryiko@gmail.com> Cc: Michal Miroslaw <mirq-linux@rere.qmqm.pl> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Matthew Wilcox <willy@infradead.org> Cc: David Hildenbrand <david@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Kees Cook <keescook@chromium.org> Cc: Petr Mladek <pmladek@suse.com> Cc: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Jakub Kicinski
|
99845220d3 |
Merge https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Daniel Borkmann says: ==================== pull-request: bpf 2022-01-19 We've added 12 non-merge commits during the last 8 day(s) which contain a total of 12 files changed, 262 insertions(+), 64 deletions(-). The main changes are: 1) Various verifier fixes mainly around register offset handling when passed to helper functions, from Daniel Borkmann. 2) Fix XDP BPF link handling to assert program type, from Toke Høiland-Jørgensen. 3) Fix regression in mount parameter handling for BPF fs, from Yafang Shao. 4) Fix incorrect integer literal when marking scratched stack slots in verifier, from Christy Lee. * https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf: bpf, selftests: Add ringbuf memory type confusion test bpf, selftests: Add various ringbuf tests with invalid offset bpf: Fix ringbuf memory type confusion when passing to helpers bpf: Fix out of bounds access for ringbuf helpers bpf: Generally fix helper register offset check bpf: Mark PTR_TO_FUNC register initially with zero offset bpf: Generalize check_ctx_reg for reuse with other types bpf: Fix incorrect integer literal used for marking scratched stack. bpf/selftests: Add check for updating XDP bpf_link with wrong program type bpf/selftests: convert xdp_link test to ASSERT_* macros xdp: check prog type before updating BPF link bpf: Fix mount source show for bpffs ==================== Link: https://lore.kernel.org/r/20220119011825.9082-1-daniel@iogearbox.net Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
Daniel Borkmann
|
37c8d4807d |
bpf, selftests: Add ringbuf memory type confusion test
Add two tests, one which asserts that ring buffer memory can be passed to other helpers for populating its entry area, and another one where verifier rejects different type of memory passed to bpf_ringbuf_submit(). Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Alexei Starovoitov <ast@kernel.org> |
||
|
Daniel Borkmann
|
722e4db3ae |
bpf, selftests: Add various ringbuf tests with invalid offset
Assert that the verifier is rejecting invalid offsets on the ringbuf entries: # ./test_verifier | grep ring #947/u ringbuf: invalid reservation offset 1 OK #947/p ringbuf: invalid reservation offset 1 OK #948/u ringbuf: invalid reservation offset 2 OK #948/p ringbuf: invalid reservation offset 2 OK Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Alexei Starovoitov <ast@kernel.org> |
||
|
Linus Torvalds
|
6a8d7fbf1c |
More ACPI updates for 5.17-rc1
- Add support for the the Platform Firmware Runtime Update and
Telemetry (PFRUT) interface based on ACPI to allow certain pieces
of the platform firmware to be updated without restarting the
system and to provide a mechanism for collecting platform firmware
telemetry data (Chen Yu, Dan Carpenter, Yang Yingliang).
- Ignore E820 reservations covering PCI host bridge windows on
sufficiently recent x86 systems to avoid issues with allocating
PCI BARs on systems where the E820 reservations cover the entire
PCI host bridge memory window returned by the _CRS object in the
system's ACPI tables (Hans de Goede).
- Fix and clean up acpi_scan_init() (Rafael Wysocki).
- Add more sanity checking to ACPI SPCR tables parsing (Mark
Langsdorf).
- Fix up ACPI APD (AMD Soc) driver initialization (Jiasheng Jiang).
- Drop unnecessary "static" from the ACPI PCC address space handling
driver added recently (kernel test robot).
-----BEGIN PGP SIGNATURE-----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=I4UB
-----END PGP SIGNATURE-----
Merge tag 'acpi-5.17-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more ACPI updates from Rafael Wysocki:
"The most significant item here is the Platform Firmware Runtime Update
and Telemetry (PFRUT) support designed to allow certain pieces of the
platform firmware to be updated on the fly, among other things.
Also important is the e820 handling change on x86 that should work
around PCI BAR allocation issues on some systems shipping since 2019.
The rest is just a handful of assorted fixes and cleanups on top of
the ACPI material merged previously.
Specifics:
- Add support for the the Platform Firmware Runtime Update and
Telemetry (PFRUT) interface based on ACPI to allow certain pieces
of the platform firmware to be updated without restarting the
system and to provide a mechanism for collecting platform firmware
telemetry data (Chen Yu, Dan Carpenter, Yang Yingliang).
- Ignore E820 reservations covering PCI host bridge windows on
sufficiently recent x86 systems to avoid issues with allocating PCI
BARs on systems where the E820 reservations cover the entire PCI
host bridge memory window returned by the _CRS object in the
system's ACPI tables (Hans de Goede).
- Fix and clean up acpi_scan_init() (Rafael Wysocki).
- Add more sanity checking to ACPI SPCR tables parsing (Mark
Langsdorf).
- Fix up ACPI APD (AMD Soc) driver initialization (Jiasheng Jiang).
- Drop unnecessary "static" from the ACPI PCC address space handling
driver added recently (kernel test robot)"
* tag 'acpi-5.17-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: PCC: pcc_ctx can be static
ACPI: scan: Rename label in acpi_scan_init()
ACPI: scan: Simplify initialization of power and sleep buttons
ACPI: scan: Change acpi_scan_init() return value type to void
ACPI: SPCR: check if table->serial_port.access_width is too wide
ACPI: APD: Check for NULL pointer after calling devm_ioremap()
x86/PCI: Ignore E820 reservations for bridge windows on newer systems
ACPI: pfr_telemetry: Fix info leak in pfrt_log_ioctl()
ACPI: pfr_update: Fix return value check in pfru_write()
ACPI: tools: Introduce utility for firmware updates/telemetry
ACPI: Introduce Platform Firmware Runtime Telemetry driver
ACPI: Introduce Platform Firmware Runtime Update device driver
efi: Introduce EFI_FIRMWARE_MANAGEMENT_CAPSULE_HEADER and corresponding structures
|
||
|
Linus Torvalds
|
57d17378a4 |
perf tools changes for v5.17: 1st batch
New features:
- Add 'trace' subcommand for 'perf ftrace', setting the stage for more
'perf ftrace' subcommands. Not using a subcommand yields the previous
behaviour of 'perf ftrace'.
- Add 'latency' subcommand to 'perf ftrace', that can use the function
graph tracer or a BPF optimized one, via the -b/--use-bpf option.
E.g.:
$ sudo perf ftrace latency -a -T mutex_lock sleep 1
# DURATION | COUNT | GRAPH |
0 - 1 us | 4596 | ######################## |
1 - 2 us | 1680 | ######### |
2 - 4 us | 1106 | ##### |
4 - 8 us | 546 | ## |
8 - 16 us | 562 | ### |
16 - 32 us | 1 | |
32 - 64 us | 0 | |
64 - 128 us | 0 | |
128 - 256 us | 0 | |
256 - 512 us | 0 | |
512 - 1024 us | 0 | |
1 - 2 ms | 0 | |
2 - 4 ms | 0 | |
4 - 8 ms | 0 | |
8 - 16 ms | 0 | |
16 - 32 ms | 0 | |
32 - 64 ms | 0 | |
64 - 128 ms | 0 | |
128 - 256 ms | 0 | |
256 - 512 ms | 0 | |
512 - 1024 ms | 0 | |
1 - ... s | 0 | |
The original implementation of this command was in the bcc tool.
- Support --cputype option for hybrid events in 'perf stat'.
Improvements:
- Call chain improvements for ARM64.
- No need to do any affinity setup when profiling pids.
- Reduce multiplexing with duration_time in 'perf stat' metrics.
- Improve error message for uncore events, stating that some event groups are
can only be used in system wide (-a) mode.
- perf stat metric group leader fixes/improvements, including arch specific
changes to better support Intel topdown events.
- Probe non-deprecated sysfs path 1st, i.e. try /sys/devices/system/cpu/cpuN/topology/thread_siblings
first, then the old /sys/devices/system/cpu/cpuN/topology/core_cpus.
- Disable debuginfod by default in 'perf record', to avoid stalls on distros
such as Fedora 35.
- Use unbuffered output in 'perf bench' when pipe/tee'ing to a file.
- Enable ignore_missing_thread in 'perf trace'
Fixes:
- Avoid TUI crash when navigating in the annotation of recursive functions.
- Fix hex dump character output in 'perf script'.
- Fix JSON indentation to 4 spaces standard in the ARM vendor event files.
- Fix use after free in metric__new().
- Fix IS_ERR_OR_NULL() usage in the perf BPF loader.
- Fix up cross-arch register support, i.e. when printing register names take
into account the architecture where the perf.data file was collected.
- Fix SMT fallback with large core counts.
- Don't lower case MetricExpr when parsing JSON files so as not to lose info
such as the ":G" event modifier in metrics.
perf test:
- Add basic stress test for sigtrap handling to 'perf test'.
- Fix 'perf test' failures on s/390
- Enable system wide for metricgroups test in 'perf test´.
- Use 3 digits for test numbering now we can have more tests.
Arch specific:
- Add events for Arm Neoverse N2 in the ARM JSON vendor event files
- Support PERF_MEM_LVLNUM encodings in powerpc, that came from a single
patch series, where I incorrectly merged the kernel bits, that were then
reverted after coordination with Michael Ellerman and Stephen Rothwell.
- Add ARM SPE total latency as PERF_SAMPLE_WEIGHT.
- Update AMD documentation, with info on raw event encoding.
- Add support for global and local variants of the "p_stage_cyc" sort key,
applicable to perf.data files collected on powerpc.
- Remove duplicate and incorrect aux size checks in the ARM CoreSight ETM code.
Refactorings:
- Add a perf_cpu abstraction to disambiguate CPUs and CPU map indexes, fixing
problems along the way.
- Document CPU map methods.
UAPI sync:
- Update arch/x86/lib/mem{cpy,set}_64.S copies used in 'perf bench mem memcpy'
- Sync UAPI files with the kernel sources: drm, msr-index, cpufeatures.
Build system
- Enable warnings through HOSTCFLAGS.
- Drop requirement for libstdc++.so for libopencsd check
libperf:
- Make libperf adopt perf_counts_values__scale() from tools/perf/util/.
- Add a stat multiplexing test to libperf.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQR2GiIUctdOfX2qHhGyPKLppCJ+JwUCYeQj6AAKCRCyPKLppCJ+
JwyWAQCBmU8OJxhSJQnNCwTB9zNkPPBbihvIztepOJ7zsw7JcQD+KfAidHGQvI/Y
EmXIYkmdNkWPYJafONllnKK5cckjxgI=
=aj9V
-----END PGP SIGNATURE-----
Merge tag 'perf-tools-for-v5.17-2022-01-16' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux
Pull perf tool updates from Arnaldo Carvalho de Melo:
"New features:
- Add 'trace' subcommand for 'perf ftrace', setting the stage for
more 'perf ftrace' subcommands. Not using a subcommand yields the
previous behaviour of 'perf ftrace'.
- Add 'latency' subcommand to 'perf ftrace', that can use the
function graph tracer or a BPF optimized one, via the -b/--use-bpf
option.
E.g.:
$ sudo perf ftrace latency -a -T mutex_lock sleep 1
# DURATION | COUNT | GRAPH |
0 - 1 us | 4596 | ######################## |
1 - 2 us | 1680 | ######### |
2 - 4 us | 1106 | ##### |
4 - 8 us | 546 | ## |
8 - 16 us | 562 | ### |
16 - 32 us | 1 | |
32 - 64 us | 0 | |
64 - 128 us | 0 | |
128 - 256 us | 0 | |
256 - 512 us | 0 | |
512 - 1024 us | 0 | |
1 - 2 ms | 0 | |
2 - 4 ms | 0 | |
4 - 8 ms | 0 | |
8 - 16 ms | 0 | |
16 - 32 ms | 0 | |
32 - 64 ms | 0 | |
64 - 128 ms | 0 | |
128 - 256 ms | 0 | |
256 - 512 ms | 0 | |
512 - 1024 ms | 0 | |
1 - ... s | 0 | |
The original implementation of this command was in the bcc tool.
- Support --cputype option for hybrid events in 'perf stat'.
Improvements:
- Call chain improvements for ARM64.
- No need to do any affinity setup when profiling pids.
- Reduce multiplexing with duration_time in 'perf stat' metrics.
- Improve error message for uncore events, stating that some event
groups are can only be used in system wide (-a) mode.
- perf stat metric group leader fixes/improvements, including arch
specific changes to better support Intel topdown events.
- Probe non-deprecated sysfs path first, i.e. try the path
/sys/devices/system/cpu/cpuN/topology/thread_siblings first, then
the old /sys/devices/system/cpu/cpuN/topology/core_cpus.
- Disable debuginfod by default in 'perf record', to avoid stalls on
distros such as Fedora 35.
- Use unbuffered output in 'perf bench' when pipe/tee'ing to a file.
- Enable ignore_missing_thread in 'perf trace'
Fixes:
- Avoid TUI crash when navigating in the annotation of recursive
functions.
- Fix hex dump character output in 'perf script'.
- Fix JSON indentation to 4 spaces standard in the ARM vendor event
files.
- Fix use after free in metric__new().
- Fix IS_ERR_OR_NULL() usage in the perf BPF loader.
- Fix up cross-arch register support, i.e. when printing register
names take into account the architecture where the perf.data file
was collected.
- Fix SMT fallback with large core counts.
- Don't lower case MetricExpr when parsing JSON files so as not to
lose info such as the ":G" event modifier in metrics.
perf test:
- Add basic stress test for sigtrap handling to 'perf test'.
- Fix 'perf test' failures on s/390
- Enable system wide for metricgroups test in 'perf test´.
- Use 3 digits for test numbering now we can have more tests.
Arch specific:
- Add events for Arm Neoverse N2 in the ARM JSON vendor event files
- Support PERF_MEM_LVLNUM encodings in powerpc, that came from a
single patch series, where I incorrectly merged the kernel bits,
that were then reverted after coordination with Michael Ellerman
and Stephen Rothwell.
- Add ARM SPE total latency as PERF_SAMPLE_WEIGHT.
- Update AMD documentation, with info on raw event encoding.
- Add support for global and local variants of the "p_stage_cyc" sort
key, applicable to perf.data files collected on powerpc.
- Remove duplicate and incorrect aux size checks in the ARM CoreSight
ETM code.
Refactorings:
- Add a perf_cpu abstraction to disambiguate CPUs and CPU map
indexes, fixing problems along the way.
- Document CPU map methods.
UAPI sync:
- Update arch/x86/lib/mem{cpy,set}_64.S copies used in 'perf bench
mem memcpy'
- Sync UAPI files with the kernel sources: drm, msr-index,
cpufeatures.
Build system
- Enable warnings through HOSTCFLAGS.
- Drop requirement for libstdc++.so for libopencsd check
libperf:
- Make libperf adopt perf_counts_values__scale() from tools/perf/util/.
- Add a stat multiplexing test to libperf"
* tag 'perf-tools-for-v5.17-2022-01-16' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (115 commits)
perf record: Disable debuginfod by default
perf evlist: No need to do any affinity setup when profiling pids
perf cpumap: Add is_dummy() method
perf metric: Fix metric_leader
perf cputopo: Fix CPU topology reading on s/390
perf metricgroup: Fix use after free in metric__new()
libperf tests: Update a use of the new cpumap API
perf arm: Fix off-by-one directory path
tools arch x86: Sync the msr-index.h copy with the kernel sources
tools headers cpufeatures: Sync with the kernel sources
tools headers UAPI: Update tools's copy of drm.h header
tools arch: Update arch/x86/lib/mem{cpy,set}_64.S copies used in 'perf bench mem memcpy'
perf pmu-events: Don't lower case MetricExpr
perf expr: Add debug logging for literals
perf tools: Probe non-deprecated sysfs path 1st
perf tools: Fix SMT fallback with large core counts
perf cpumap: Give CPUs their own type
perf stat: Correct first_shadow_cpu to return index
perf script: Fix flipped index and cpu
perf c2c: Use more intention revealing iterator
...
|
||
Rafael J. Wysocki
|
e3daa2607b |
Merge branch 'acpi-pfrut'
Merge support for the Platform Firmware Runtime Update and Telemetry interface based on ACPI. The interface provided here allows updating certain pieces of the platform firmware without restarting the system and collecting platform firmware telemetry data. This also includes a utility for accesing the new interface from user space. * acpi-pfrut: ACPI: pfr_telemetry: Fix info leak in pfrt_log_ioctl() ACPI: pfr_update: Fix return value check in pfru_write() ACPI: tools: Introduce utility for firmware updates/telemetry ACPI: Introduce Platform Firmware Runtime Telemetry driver ACPI: Introduce Platform Firmware Runtime Update device driver efi: Introduce EFI_FIRMWARE_MANAGEMENT_CAPSULE_HEADER and corresponding structures |
||
|
Linus Torvalds
|
35ce8ae9ae |
Merge branch 'signal-for-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace
Pull signal/exit/ptrace updates from Eric Biederman:
"This set of changes deletes some dead code, makes a lot of cleanups
which hopefully make the code easier to follow, and fixes bugs found
along the way.
The end-game which I have not yet reached yet is for fatal signals
that generate coredumps to be short-circuit deliverable from
complete_signal, for force_siginfo_to_task not to require changing
userspace configured signal delivery state, and for the ptrace stops
to always happen in locations where we can guarantee on all
architectures that the all of the registers are saved and available on
the stack.
Removal of profile_task_ext, profile_munmap, and profile_handoff_task
are the big successes for dead code removal this round.
A bunch of small bug fixes are included, as most of the issues
reported were small enough that they would not affect bisection so I
simply added the fixes and did not fold the fixes into the changes
they were fixing.
There was a bug that broke coredumps piped to systemd-coredump. I
dropped the change that caused that bug and replaced it entirely with
something much more restrained. Unfortunately that required some
rebasing.
Some successes after this set of changes: There are few enough calls
to do_exit to audit in a reasonable amount of time. The lifetime of
struct kthread now matches the lifetime of struct task, and the
pointer to struct kthread is no longer stored in set_child_tid. The
flag SIGNAL_GROUP_COREDUMP is removed. The field group_exit_task is
removed. Issues where task->exit_code was examined with
signal->group_exit_code should been examined were fixed.
There are several loosely related changes included because I am
cleaning up and if I don't include them they will probably get lost.
The original postings of these changes can be found at:
https://lkml.kernel.org/r/87a6ha4zsd.fsf@email.froward.int.ebiederm.org
https://lkml.kernel.org/r/87bl1kunjj.fsf@email.froward.int.ebiederm.org
https://lkml.kernel.org/r/87r19opkx1.fsf_-_@email.froward.int.ebiederm.org
I trimmed back the last set of changes to only the obviously correct
once. Simply because there was less time for review than I had hoped"
* 'signal-for-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (44 commits)
ptrace/m68k: Stop open coding ptrace_report_syscall
ptrace: Remove unused regs argument from ptrace_report_syscall
ptrace: Remove second setting of PT_SEIZED in ptrace_attach
taskstats: Cleanup the use of task->exit_code
exit: Use the correct exit_code in /proc/<pid>/stat
exit: Fix the exit_code for wait_task_zombie
exit: Coredumps reach do_group_exit
exit: Remove profile_handoff_task
exit: Remove profile_task_exit & profile_munmap
signal: clean up kernel-doc comments
signal: Remove the helper signal_group_exit
signal: Rename group_exit_task group_exec_task
coredump: Stop setting signal->group_exit_task
signal: Remove SIGNAL_GROUP_COREDUMP
signal: During coredumps set SIGNAL_GROUP_EXIT in zap_process
signal: Make coredump handling explicit in complete_signal
signal: Have prepare_signal detect coredumps using signal->core_state
signal: Have the oom killer detect coredumps using signal->core_state
exit: Move force_uaccess back into do_exit
exit: Guarantee make_task_dead leaks the tsk when calling do_task_exit
...
|
||
|
Linus Torvalds
|
79e06c4c49 |
RISCV:
- Use common KVM implementation of MMU memory caches
- SBI v0.2 support for Guest
- Initial KVM selftests support
- Fix to avoid spurious virtual interrupts after clearing hideleg CSR
- Update email address for Anup and Atish
ARM:
- Simplification of the 'vcpu first run' by integrating it into
KVM's 'pid change' flow
- Refactoring of the FP and SVE state tracking, also leading to
a simpler state and less shared data between EL1 and EL2 in
the nVHE case
- Tidy up the header file usage for the nvhe hyp object
- New HYP unsharing mechanism, finally allowing pages to be
unmapped from the Stage-1 EL2 page-tables
- Various pKVM cleanups around refcounting and sharing
- A couple of vgic fixes for bugs that would trigger once
the vcpu xarray rework is merged, but not sooner
- Add minimal support for ARMv8.7's PMU extension
- Rework kvm_pgtable initialisation ahead of the NV work
- New selftest for IRQ injection
- Teach selftests about the lack of default IPA space and
page sizes
- Expand sysreg selftest to deal with Pointer Authentication
- The usual bunch of cleanups and doc update
s390:
- fix sigp sense/start/stop/inconsistency
- cleanups
x86:
- Clean up some function prototypes more
- improved gfn_to_pfn_cache with proper invalidation, used by Xen emulation
- add KVM_IRQ_ROUTING_XEN_EVTCHN and event channel delivery
- completely remove potential TOC/TOU races in nested SVM consistency checks
- update some PMCs on emulated instructions
- Intel AMX support (joint work between Thomas and Intel)
- large MMU cleanups
- module parameter to disable PMU virtualization
- cleanup register cache
- first part of halt handling cleanups
- Hyper-V enlightened MSR bitmap support for nested hypervisors
Generic:
- clean up Makefiles
- introduce CONFIG_HAVE_KVM_DIRTY_RING
- optimize memslot lookup using a tree
- optimize vCPU array usage by converting to xarray
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmHhxvsUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroPZkAf+Nz92UL/5nNGcdHtE4m7AToMmitE9
bYkesf9BMQvAe5wjkABLuoHGi6ay4jabo4fiGzbdkiK7lO5YgfsWiMB3/MT5fl4E
jRPzaVQabp3YZLM8UYCBmfUVuRj524S967SfSRe0AvYjDEH8y7klPf4+7sCsFT0/
Px9Vf2KGuOlf0eM78yKg4rGaF0jS22eLgXm6FfNMY8/e29ZAo/jyUmqBY+Z2xxZG
aWhceDtSheW1jwLHLj3nOlQJvHTn8LVGXBE/R8Gda3ZjrBV2rKaDi4Fh+HD+dz86
2zVXwzQ7uck2CMW73GMoXMTWoKSHMyvlBOs1BdvBm4UsnGcXR+q8IFCeuQ==
=s73m
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm updates from Paolo Bonzini:
"RISCV:
- Use common KVM implementation of MMU memory caches
- SBI v0.2 support for Guest
- Initial KVM selftests support
- Fix to avoid spurious virtual interrupts after clearing hideleg CSR
- Update email address for Anup and Atish
ARM:
- Simplification of the 'vcpu first run' by integrating it into KVM's
'pid change' flow
- Refactoring of the FP and SVE state tracking, also leading to a
simpler state and less shared data between EL1 and EL2 in the nVHE
case
- Tidy up the header file usage for the nvhe hyp object
- New HYP unsharing mechanism, finally allowing pages to be unmapped
from the Stage-1 EL2 page-tables
- Various pKVM cleanups around refcounting and sharing
- A couple of vgic fixes for bugs that would trigger once the vcpu
xarray rework is merged, but not sooner
- Add minimal support for ARMv8.7's PMU extension
- Rework kvm_pgtable initialisation ahead of the NV work
- New selftest for IRQ injection
- Teach selftests about the lack of default IPA space and page sizes
- Expand sysreg selftest to deal with Pointer Authentication
- The usual bunch of cleanups and doc update
s390:
- fix sigp sense/start/stop/inconsistency
- cleanups
x86:
- Clean up some function prototypes more
- improved gfn_to_pfn_cache with proper invalidation, used by Xen
emulation
- add KVM_IRQ_ROUTING_XEN_EVTCHN and event channel delivery
- completely remove potential TOC/TOU races in nested SVM consistency
checks
- update some PMCs on emulated instructions
- Intel AMX support (joint work between Thomas and Intel)
- large MMU cleanups
- module parameter to disable PMU virtualization
- cleanup register cache
- first part of halt handling cleanups
- Hyper-V enlightened MSR bitmap support for nested hypervisors
Generic:
- clean up Makefiles
- introduce CONFIG_HAVE_KVM_DIRTY_RING
- optimize memslot lookup using a tree
- optimize vCPU array usage by converting to xarray"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (268 commits)
x86/fpu: Fix inline prefix warnings
selftest: kvm: Add amx selftest
selftest: kvm: Move struct kvm_x86_state to header
selftest: kvm: Reorder vcpu_load_state steps for AMX
kvm: x86: Disable interception for IA32_XFD on demand
x86/fpu: Provide fpu_sync_guest_vmexit_xfd_state()
kvm: selftests: Add support for KVM_CAP_XSAVE2
kvm: x86: Add support for getting/setting expanded xstate buffer
x86/fpu: Add uabi_size to guest_fpu
kvm: x86: Add CPUID support for Intel AMX
kvm: x86: Add XCR0 support for Intel AMX
kvm: x86: Disable RDMSR interception of IA32_XFD_ERR
kvm: x86: Emulate IA32_XFD_ERR for guest
kvm: x86: Intercept #NM for saving IA32_XFD_ERR
x86/fpu: Prepare xfd_err in struct fpu_guest
kvm: x86: Add emulation for IA32_XFD
x86/fpu: Provide fpu_update_guest_xfd() for IA32_XFD emulation
kvm: x86: Enable dynamic xfeatures at KVM_SET_CPUID2
x86/fpu: Provide fpu_enable_guest_xfd_features() for KVM
x86/fpu: Add guest support to xfd_enable_feature()
...
|
||
|
Linus Torvalds
|
4d66020dce |
Tracing updates for 5.17:
New:
- The Real Time Linux Analysis (RTLA) tool is added to the tools directory.
- Can safely filter on user space pointers with: field.ustring ~ "match-string"
- eprobes can now be filtered like any other event.
- trace_marker(_raw) now uses stream_open() to allow multiple threads to safely
write to it. Note, this could possibly break existing user space, but we will
not know until we hear about it, and then can revert the change if need be.
- New field in events to display when bottom halfs are disabled.
- Sorting of the ftrace functions are now done at compile time instead of
at bootup.
Infrastructure changes to support future efforts:
- Added __rel_loc type for trace events. Similar to __data_loc but the offset
to the dynamic data is based off of the location of the descriptor and not
the beginning of the event. Needed for user defined events.
- Some simplification of event trigger code.
- Make synthetic events process its callback better to not hinder other
event callbacks that are registered. Needed for user defined events.
And other small fixes and clean ups.
-
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCYeGvcxQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qrZtAP9ICjJxX54MTErElhhUL/NFLV7wqhJi
OIAgmp6jGVRqPAD+JxQtBnGH+3XMd71ioQkTfQ1rp+jBz2ERBj2DmELUAg0=
=zmda
-----END PGP SIGNATURE-----
Merge tag 'trace-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing updates from Steven Rostedt:
"New:
- The Real Time Linux Analysis (RTLA) tool is added to the tools
directory.
- Can safely filter on user space pointers with: field.ustring ~
"match-string"
- eprobes can now be filtered like any other event.
- trace_marker(_raw) now uses stream_open() to allow multiple threads
to safely write to it. Note, this could possibly break existing
user space, but we will not know until we hear about it, and then
can revert the change if need be.
- New field in events to display when bottom halfs are disabled.
- Sorting of the ftrace functions are now done at compile time
instead of at bootup.
Infrastructure changes to support future efforts:
- Added __rel_loc type for trace events. Similar to __data_loc but
the offset to the dynamic data is based off of the location of the
descriptor and not the beginning of the event. Needed for user
defined events.
- Some simplification of event trigger code.
- Make synthetic events process its callback better to not hinder
other event callbacks that are registered. Needed for user defined
events.
And other small fixes and cleanups"
* tag 'trace-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (50 commits)
tracing: Add ustring operation to filtering string pointers
rtla: Add rtla timerlat hist documentation
rtla: Add rtla timerlat top documentation
rtla: Add rtla timerlat documentation
rtla: Add rtla osnoise hist documentation
rtla: Add rtla osnoise top documentation
rtla: Add rtla osnoise man page
rtla: Add Documentation
rtla/timerlat: Add timerlat hist mode
rtla: Add timerlat tool and timelart top mode
rtla/osnoise: Add the hist mode
rtla/osnoise: Add osnoise top mode
rtla: Add osnoise tool
rtla: Helper functions for rtla
rtla: Real-Time Linux Analysis tool
tracing/osnoise: Properly unhook events if start_per_cpu_kthreads() fails
tracing: Remove duplicate warnings when calling trace_create_file()
tracing/kprobes: 'nmissed' not showed correctly for kretprobe
tracing: Add test for user space strings when filtering on string pointers
tracing: Have syscall trace events use trace_event_buffer_lock_reserve()
...
|
||
Jiri Olsa
|
9bce13ea88 |
perf record: Disable debuginfod by default
Fedora 35 sets DEBUGINFOD_URLS by default, which might lead to unexpected stalls in perf record exit path, when we try to cache profiled binaries. # DEBUGINFOD_PROGRESS=1 ./perf record -a ^C[ perf record: Woken up 1 times to write data ] Downloading from https://debuginfod.fedoraproject.org/ 447069 Downloading from https://debuginfod.fedoraproject.org/ 1502175 Downloading \^Z Disabling DEBUGINFOD_URLS by default in perf record and adding debuginfod option and .perfconfig variable support to enable id. Default without debuginfo processing: # perf record -a Using system debuginfod setup: # perf record -a --debuginfod Using custom debuginfd url: # perf record -a --debuginfod='https://evenbetterdebuginfodserver.krava' Adding single perf_debuginfod_setup function and using it also in perf buildid-cache command. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Frank Ch. Eigler <fche@redhat.com> Cc: Ian Rogers <irogers@google.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Michael Petlan <mpetlan@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20211209200425.303561-1-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
Arnaldo Carvalho de Melo
|
2eea0b56b0 |
perf evlist: No need to do any affinity setup when profiling pids
The cpumap is dummy, so no need to go on figuring out affinity.o This way we reduce the setup time for simple scenarios like: $ perf stat sleep 1 Acked-by: Andi Kleen <andi@firstfloor.org> Acked-by: Ian Rogers <irogers@google.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
|
Arnaldo Carvalho de Melo
|
37be585807 |
perf cpumap: Add is_dummy() method
Needed to check if a cpu_map is dummy, i.e. not a cpu map at all, for pid monitoring scenarios. This probably needs to move to libperf, but since perf itself is the first and so far only user, leave it at tools/perf/util/. Acked-by: Andi Kleen <andi@firstfloor.org> Acked-by: Ian Rogers <irogers@google.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> |
||
Ian Rogers
|
d3e2bb4359 |
perf metric: Fix metric_leader
Multiple events may have a metric_leader to aggregate into.
This happens for uncore events where, for example, uncore_imc is
expanded into uncore_imc_0, uncore_imc_1, etc.
Such events all have the same metric_id and should aggregate into the
first event.
The change introducing metric_ids had a bug where the metric_id was
compared to itself, creating an always true condition.
Correct this by comparing the event in the metric_evlist and the
metric_leader.
Fixes:
|
||
|
Linus Torvalds
|
f56caedaf9 |
Merge branch 'akpm' (patches from Andrew)
Merge misc updates from Andrew Morton: "146 patches. Subsystems affected by this patch series: kthread, ia64, scripts, ntfs, squashfs, ocfs2, vfs, and mm (slab-generic, slab, kmemleak, dax, kasan, debug, pagecache, gup, shmem, frontswap, memremap, memcg, selftests, pagemap, dma, vmalloc, memory-failure, hugetlb, userfaultfd, vmscan, mempolicy, oom-kill, hugetlbfs, migration, thp, ksm, page-poison, percpu, rmap, zswap, zram, cleanups, hmm, and damon)" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (146 commits) mm/damon: hide kernel pointer from tracepoint event mm/damon/vaddr: hide kernel pointer from damon_va_three_regions() failure log mm/damon/vaddr: use pr_debug() for damon_va_three_regions() failure logging mm/damon/dbgfs: remove an unnecessary variable mm/damon: move the implementation of damon_insert_region to damon.h mm/damon: add access checking for hugetlb pages Docs/admin-guide/mm/damon/usage: update for schemes statistics mm/damon/dbgfs: support all DAMOS stats Docs/admin-guide/mm/damon/reclaim: document statistics parameters mm/damon/reclaim: provide reclamation statistics mm/damon/schemes: account how many times quota limit has exceeded mm/damon/schemes: account scheme actions that successfully applied mm/damon: remove a mistakenly added comment for a future feature Docs/admin-guide/mm/damon/usage: update for kdamond_pid and (mk|rm)_contexts Docs/admin-guide/mm/damon/usage: mention tracepoint at the beginning Docs/admin-guide/mm/damon/usage: remove redundant information Docs/admin-guide/mm/damon/usage: update for scheme quotas and watermarks mm/damon: convert macro functions to static inline functions mm/damon: modify damon_rand() macro to static inline function mm/damon: move damon_rand() definition into damon.h ... |
||
Alistair Popple
|
87c01d57fa |
mm/hmm.c: allow VM_MIXEDMAP to work with hmm_range_fault
hmm_range_fault() can be used instead of get_user_pages() for devices
which allow faulting however unlike get_user_pages() it will return an
error when used on a VM_MIXEDMAP range.
To make hmm_range_fault() more closely match get_user_pages() remove
this restriction. This requires dealing with the !ARCH_HAS_PTE_SPECIAL
case in hmm_vma_handle_pte(). Rather than replicating the logic of
vm_normal_page() call it directly and do a check for the zero pfn
similar to what get_user_pages() currently does.
Also add a test to hmm selftest to verify functionality.
Link: https://lkml.kernel.org/r/20211104012001.2555676-1-apopple@nvidia.com
Fixes:
|
||
Mike Kravetz
|
692b55815c |
userfaultfd/selftests: clean up hugetlb allocation code
The message for commit
|
||
Peter Xu
|
fab5150548 |
selftests/uffd: allow EINTR/EAGAIN
This allow test to continue with interruptions like gdb. Link: https://lkml.kernel.org/r/20211115135219.85881-1-peterx@redhat.com Signed-off-by: Peter Xu <peterx@redhat.com> Reviewed-by: Axel Rasmussen <axelrasmussen@google.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Nadav Amit <nadav.amit@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Waiman Long
|
209376ed2a |
selftests/vm: make charge_reserved_hugetlb.sh work with existing cgroup setting
The hugetlb cgroup reservation test charge_reserved_hugetlb.sh assume
that no cgroup filesystems are mounted before running the test. That is
not true in many cases. As a result, the test fails to run. Fix that
by querying the current cgroup mount setting and using the existing
cgroup setup instead before attempting to freshly mount a cgroup
filesystem.
Similar change is also made for hugetlb_reparenting_test.sh as well,
though it still has problem if cgroup v2 isn't used.
The patched test scripts were run on a centos 8 based system to verify
that they ran properly.
Link: https://lkml.kernel.org/r/20220106201359.1646575-1-longman@redhat.com
Fixes:
|
||
Yosry Ahmed
|
f77a286de4 |
mm, hugepages: make memory size variable in hugepage-mremap selftest
The hugetlb vma mremap() test currently maps 1GB of memory to trigger pmd sharing and make sure that 'unshare' path in mremap code works. The test originally only mapped 10MB of memory (as specified by the header comment) but was later modified to 1GB to tackle this case. However, not all machines will have 1GB of memory to spare for this test. Adding a mapping size arg will allow run_vmtest.sh to pass an adequate mapping size, while allowing users to run the test independently with arbitrary size mappings. Link: https://lkml.kernel.org/r/20211124203805.3700355-1-yosryahmed@google.com Signed-off-by: Yosry Ahmed <yosryahmed@google.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Mina Almasry <almasrymina@google.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
chiminghao
|
2c769ed713 |
tools/testing/selftests/vm/userfaultfd.c: use swap() to make code cleaner
Fix the following coccicheck REVIEW: tools/testing/selftests/vm/userfaultfd.c:1531:21-22:use swap() to make code cleaner Link: https://lkml.kernel.org/r/20211124031632.35317-1-chi.minghao@zte.com.cn Signed-off-by: chiminghao <chi.minghao@zte.com.cn> Reported-by: Zeal Robot <zealci@zte.com.cn> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Yang Zhong
|
bf70636d94 |
selftest: kvm: Add amx selftest
This selftest covers two aspects of AMX. The first is triggering #NM exception and checking the MSR XFD_ERR value. The second case is loading tile config and tile data into guest registers and trapping to the host side for a complete save/load of the guest state. TMM0 is also checked against memory data after save/restore. Signed-off-by: Yang Zhong <yang.zhong@intel.com> Message-Id: <20211223145322.2914028-4-yang.zhong@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> |
||
|
Yang Zhong
|
6559b4a523 |
selftest: kvm: Move struct kvm_x86_state to header
Those changes can avoid dereferencing pointer compile issue when amx_test.c reference state->xsave. Move struct kvm_x86_state definition to processor.h. Signed-off-by: Yang Zhong <yang.zhong@intel.com> Message-Id: <20211223145322.2914028-3-yang.zhong@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> |
||
Paolo Bonzini
|
551447cfa5 |
selftest: kvm: Reorder vcpu_load_state steps for AMX
For AMX support it is recommended to load XCR0 after XFD, so that KVM does not see XFD=0, XCR=1 for a save state that will eventually be disabled (which would lead to premature allocation of the space required for that save state). It is also required to load XSAVE data after XCR0 and XFD, so that KVM can trigger allocation of the extra space required to store AMX state. Adjust vcpu_load_state to obey these new requirements. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Yang Zhong <yang.zhong@intel.com> Message-Id: <20211223145322.2914028-2-yang.zhong@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> |
||
Wei Wang
|
415a3c33e8 |
kvm: selftests: Add support for KVM_CAP_XSAVE2
When KVM_CAP_XSAVE2 is supported, userspace is expected to allocate buffer for KVM_GET_XSAVE2 and KVM_SET_XSAVE using the size returned by KVM_CHECK_EXTENSION(KVM_CAP_XSAVE2). Signed-off-by: Wei Wang <wei.w.wang@intel.com> Signed-off-by: Guang Zeng <guang.zeng@intel.com> Signed-off-by: Jing Liu <jing2.liu@intel.com> Signed-off-by: Yang Zhong <yang.zhong@intel.com> Message-Id: <20220105123532.12586-20-yang.zhong@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> |
||
|
Linus Torvalds
|
3bad80dab9 |
Char/Misc and other driver changes for 5.17-rc1
Here is the large set of char, misc, and other "small" driver subsystem changes for 5.17-rc1. Lots of different things are in here for char/misc drivers such as: - habanalabs driver updates - mei driver updates - lkdtm driver updates - vmw_vmci driver updates - android binder driver updates - other small char/misc driver updates Also smaller driver subsystems have also been updated, including: - fpga subsystem updates - iio subsystem updates - soundwire subsystem updates - extcon subsystem updates - gnss subsystem updates - phy subsystem updates - coresight subsystem updates - firmware subsystem updates - comedi subsystem updates - mhi subsystem updates - speakup subsystem updates - rapidio subsystem updates - spmi subsystem updates - virtual driver updates - counter subsystem updates Too many individual changes to summarize, the shortlog contains the full details. All of these have been in linux-next for a while with no reported issues. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -----BEGIN PGP SIGNATURE----- iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYeGNAQ8cZ3JlZ0Brcm9h aC5jb20ACgkQMUfUDdst+ymoVgCg1CPjMu8/SDj3Sm3a1UMQJn9jnl8AnjQcEp3z hMr9mISG4r6g4PvjrJBj =9May -----END PGP SIGNATURE----- Merge tag 'char-misc-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc and other driver updates from Greg KH: "Here is the large set of char, misc, and other "small" driver subsystem changes for 5.17-rc1. Lots of different things are in here for char/misc drivers such as: - habanalabs driver updates - mei driver updates - lkdtm driver updates - vmw_vmci driver updates - android binder driver updates - other small char/misc driver updates Also smaller driver subsystems have also been updated, including: - fpga subsystem updates - iio subsystem updates - soundwire subsystem updates - extcon subsystem updates - gnss subsystem updates - phy subsystem updates - coresight subsystem updates - firmware subsystem updates - comedi subsystem updates - mhi subsystem updates - speakup subsystem updates - rapidio subsystem updates - spmi subsystem updates - virtual driver updates - counter subsystem updates Too many individual changes to summarize, the shortlog contains the full details. All of these have been in linux-next for a while with no reported issues" * tag 'char-misc-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (406 commits) counter: 104-quad-8: Fix use-after-free by quad8_irq_handler dt-bindings: mux: Document mux-states property dt-bindings: ti-serdes-mux: Add defines for J721S2 SoC counter: remove old and now unused registration API counter: ti-eqep: Convert to new counter registration counter: stm32-lptimer-cnt: Convert to new counter registration counter: stm32-timer-cnt: Convert to new counter registration counter: microchip-tcb-capture: Convert to new counter registration counter: ftm-quaddec: Convert to new counter registration counter: intel-qep: Convert to new counter registration counter: interrupt-cnt: Convert to new counter registration counter: 104-quad-8: Convert to new counter registration counter: Update documentation for new counter registration functions counter: Provide alternative counter registration functions counter: stm32-timer-cnt: Convert to counter_priv() wrapper counter: stm32-lptimer-cnt: Convert to counter_priv() wrapper counter: ti-eqep: Convert to counter_priv() wrapper counter: ftm-quaddec: Convert to counter_priv() wrapper counter: intel-qep: Convert to counter_priv() wrapper counter: microchip-tcb-capture: Convert to counter_priv() wrapper ... |
||
Thomas Richter
|
a6e6274362 |
perf cputopo: Fix CPU topology reading on s/390
Commit |
||
José Expósito
|
e000ea0bef |
perf metricgroup: Fix use after free in metric__new()
We shouldn't free() something that will be used in the next line, fix
it.
Fixes:
|
||
|
Ian Rogers
|
99fc11bb5b |
libperf tests: Update a use of the new cpumap API
Fixes a build breakage.
Fixes:
|
||
|
Ian Rogers
|
46f57d2410 |
perf arm: Fix off-by-one directory path
Relative path include works in the regular build due to -I paths but may
fail in other situations.
Fixes:
|
||
|
Arnaldo Carvalho de Melo
|
e652ab64e5 |
tools arch x86: Sync the msr-index.h copy with the kernel sources
To pick up the changes in:
|
||
|
Linus Torvalds
|
29ec39fcf1 |
powerpc updates for 5.17
- Optimise radix KVM guest entry/exit by 2x on Power9/Power10.
- Allow firmware to tell us whether to disable the entry and uaccess flushes on Power10
or later CPUs.
- Add BPF_PROBE_MEM support for 32 and 64-bit BPF jits.
- Several fixes and improvements to our hard lockup watchdog.
- Activate HAVE_DYNAMIC_FTRACE_WITH_REGS on 32-bit.
- Allow building the 64-bit Book3S kernel without hash MMU support, ie. Radix only.
- Add KUAP (SMAP) support for 40x, 44x, 8xx, Book3E (64-bit).
- Add new encodings for perf_mem_data_src.mem_hops field, and use them on Power10.
- A series of small performance improvements to 64-bit interrupt entry.
- Several commits fixing issues when building with the clang integrated assembler.
- Many other small features and fixes.
Thanks to: Alan Modra, Alexey Kardashevskiy, Ammar Faizi, Anders Roxell, Arnd Bergmann,
Athira Rajeev, Cédric Le Goater, Christophe JAILLET, Christophe Leroy, Christoph Hellwig,
Daniel Axtens, David Yang, Erhard Furtner, Fabiano Rosas, Greg Kroah-Hartman, Guo Ren,
Hari Bathini, Jason Wang, Joel Stanley, Julia Lawall, Kajol Jain, Kees Cook, Laurent
Dufour, Madhavan Srinivasan, Mark Brown, Minghao Chi, Nageswara R Sastry, Naresh Kamboju,
Nathan Chancellor, Nathan Lynch, Nicholas Piggin, Nick Child, Oliver O'Halloran, Peiwei
Hu, Randy Dunlap, Ravi Bangoria, Rob Herring, Russell Currey, Sachin Sant, Sean
Christopherson, Segher Boessenkool, Thadeu Lima de Souza Cascardo, Tyrel Datwyler, Xiang
wangx, Yang Guang.
-----BEGIN PGP SIGNATURE-----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=BxhQ
-----END PGP SIGNATURE-----
Merge tag 'powerpc-5.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
- Optimise radix KVM guest entry/exit by 2x on Power9/Power10.
- Allow firmware to tell us whether to disable the entry and uaccess
flushes on Power10 or later CPUs.
- Add BPF_PROBE_MEM support for 32 and 64-bit BPF jits.
- Several fixes and improvements to our hard lockup watchdog.
- Activate HAVE_DYNAMIC_FTRACE_WITH_REGS on 32-bit.
- Allow building the 64-bit Book3S kernel without hash MMU support, ie.
Radix only.
- Add KUAP (SMAP) support for 40x, 44x, 8xx, Book3E (64-bit).
- Add new encodings for perf_mem_data_src.mem_hops field, and use them
on Power10.
- A series of small performance improvements to 64-bit interrupt entry.
- Several commits fixing issues when building with the clang integrated
assembler.
- Many other small features and fixes.
Thanks to Alan Modra, Alexey Kardashevskiy, Ammar Faizi, Anders Roxell,
Arnd Bergmann, Athira Rajeev, Cédric Le Goater, Christophe JAILLET,
Christophe Leroy, Christoph Hellwig, Daniel Axtens, David Yang, Erhard
Furtner, Fabiano Rosas, Greg Kroah-Hartman, Guo Ren, Hari Bathini, Jason
Wang, Joel Stanley, Julia Lawall, Kajol Jain, Kees Cook, Laurent Dufour,
Madhavan Srinivasan, Mark Brown, Minghao Chi, Nageswara R Sastry, Naresh
Kamboju, Nathan Chancellor, Nathan Lynch, Nicholas Piggin, Nick Child,
Oliver O'Halloran, Peiwei Hu, Randy Dunlap, Ravi Bangoria, Rob Herring,
Russell Currey, Sachin Sant, Sean Christopherson, Segher Boessenkool,
Thadeu Lima de Souza Cascardo, Tyrel Datwyler, Xiang wangx, and Yang
Guang.
* tag 'powerpc-5.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (240 commits)
powerpc/xmon: Dump XIVE information for online-only processors.
powerpc/opal: use default_groups in kobj_type
powerpc/cacheinfo: use default_groups in kobj_type
powerpc/sched: Remove unused TASK_SIZE_OF
powerpc/xive: Add missing null check after calling kmalloc
powerpc/floppy: Remove usage of the deprecated "pci-dma-compat.h" API
selftests/powerpc: Add a test of sigreturning to an unaligned address
powerpc/64s: Use EMIT_WARN_ENTRY for SRR debug warnings
powerpc/64s: Mask NIP before checking against SRR0
powerpc/perf: Fix spelling of "its"
powerpc/32: Fix boot failure with GCC latent entropy plugin
powerpc/code-patching: Replace patch_instruction() by ppc_inst_write() in selftests
powerpc/code-patching: Move code patching selftests in its own file
powerpc/code-patching: Move instr_is_branch_{i/b}form() in code-patching.h
powerpc/code-patching: Move patch_exception() outside code-patching.c
powerpc/code-patching: Use test_trampoline for prefixed patch test
powerpc/code-patching: Fix patch_branch() return on out-of-range failure
powerpc/code-patching: Reorganise do_patch_instruction() to ease error handling
powerpc/code-patching: Fix unmap_patch_area() error handling
powerpc/code-patching: Fix error handling in do_patch_instruction()
...
|
||
|
Linus Torvalds
|
3ceff4ea07 |
sound updates for 5.17-rc1
It's a relatively calm development cycle, but still lots of updates in
the driver side like Intel SOF. Below are some highlights:
* ALSA / ASoC core:
- A new kselftest for ALSA control API
- PCM NO_REWINDS support
- Potential race fixes around control removals
- Unify x86 SG-buffer memory allocation code
- Cleanups and race fixes for ASoC DPCM locking
* ASoC:
- Refinements and cleanups around the delay() APIs
- Wider use of dev_err_probe().
- Continuing cleanups and improvements to the SOF code
- Support for pin switches in simple-card derived cards
- Support for AMD Renoir ACP, Asahi Kasei Microdevices AKM4375, Intel
systems using NAU8825 and MAX98390, Mediatek MT8915, nVidia Tegra20
S/PDIF, Qualcomm systems using ALC5682I-VS and Texas Instruments
TLV320ADC3xxx
* HD-audio / USB-audio:
- Fix deadlock at HD-audio codec unbinding
- Fixes for Tegra194 HD-audio, new HDA support for CS35L41 codec
- Quirks for Lenovo and HP machines, Gigabyte mobo, Bose device
* Misc:
- Fix virmidi drain behavior
Note that the merge of CS35L41 codec support is still half-baked, and
at least one ACPI change is missing. Although this won't hinder the
kernel build itself, we're going to catch up before RC1.
-----BEGIN PGP SIGNATURE-----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=csTR
-----END PGP SIGNATURE-----
Merge tag 'sound-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"It's a relatively calm development cycle, but still lots of updates in
the driver side like Intel SOF. Below are some highlights:
ALSA / ASoC core:
- A new kselftest for ALSA control API
- PCM NO_REWINDS support
- Potential race fixes around control removals
- Unify x86 SG-buffer memory allocation code
- Cleanups and race fixes for ASoC DPCM locking
ASoC:
- Refinements and cleanups around the delay() APIs
- Wider use of dev_err_probe().
- Continuing cleanups and improvements to the SOF code
- Support for pin switches in simple-card derived cards
- Support for AMD Renoir ACP, Asahi Kasei Microdevices AKM4375, Intel
systems using NAU8825 and MAX98390, Mediatek MT8915, nVidia Tegra20
S/PDIF, Qualcomm systems using ALC5682I-VS and Texas Instruments
TLV320ADC3xxx
HD-audio / USB-audio:
- Fix deadlock at HD-audio codec unbinding
- Fixes for Tegra194 HD-audio, new HDA support for CS35L41 codec
- Quirks for Lenovo and HP machines, Gigabyte mobo, Bose device
Misc:
- Fix virmidi drain behavior
Note that the merge of CS35L41 codec support is still half-baked, and
at least one ACPI change is missing. Although this won't hinder the
kernel build itself, we're going to catch up before RC1"
* tag 'sound-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (415 commits)
ALSA: hda: intel-dsp-config: reorder the config table
ALSA: hda: intel-dsp-config: add JasperLake support
ALSA: hda: cs35l41: fix double free on error in probe()
ALSA: hda: Fix dependencies of CS35L41 on SPI/I2C buses
ALSA: hda: Fix dependency on ASoC cs35l41 codec
ASoC: cs35l41: Add support for hibernate memory retention mode
ASoC: cs35l41: Update handling of test key registers
ALSA: intel_hdmi: Check for error num after setting mask
ASoC: wcd9335: Keep a RX port value for each SLIM RX mux
ASoC: amd: acp: acp-mach: Change default RT1019 amp dev id
ALSA: virmidi: Remove duplicated code
ALSA: seq: virmidi: Add a drain operation
ASoC: topology: Fix typo
ASoC: fsl_asrc: refine the check of available clock divider
ASoC: Intel: bytcr_rt5640: Add support for external GPIO jack-detect
ASoC: Intel: bytcr_rt5640: Support retrieving the codec IRQ from the AMCR0F28 ACPI dev
ASoC: rt5640: Add support for boards with an external jack-detect GPIO
ASoC: rt5640: Allow snd_soc_component_set_jack() to override the codec IRQ
ASoC: rt5640: Change jack_work to a delayed_work
ASoC: rt5640: Fix possible NULL pointer deref on resume
...
|
||
Li Zhijian
|
2255634100 |
kselftests/net: list all available tests in usage()
So that users can run/query them easily. $ ./fcnal-test.sh -h usage: fcnal-test.sh OPTS -4 IPv4 tests only -6 IPv6 tests only -t <test> Test name/set to run -p Pause on fail -P Pause after each test -v Be verbose Tests: ipv4_ping ipv4_tcp ipv4_udp ipv4_bind ipv4_runtime ipv4_netfilter ipv6_ping ipv6_tcp ipv6_udp ipv6_bind ipv6_runtime ipv6_netfilter use_cases Suggested-by: David Ahern <dsahern@gmail.com> Signed-off-by: Li Zhijian <lizhijian@fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
Daniel Bristot de Oliveira
|
d40d48e1f1 |
rtla: Add Documentation
Adds the basis for rtla documentation. This patch also includes the rtla(1) man page. As suggested by Jonathan Corbet, we are placing these man pages at Documentation/tools/rtla, using rst format. It is not linked to the official documentation, though. The Makefile is based on bpftool's Documentation one. Link: https://lkml.kernel.org/r/5f510f3e962fc0cd531c43f5a815544dd720c3f2.1639158831.git.bristot@kernel.org Cc: Tao Zhou <tao.zhou@linux.dev> Cc: Ingo Molnar <mingo@redhat.com> Cc: Tom Zanussi <zanussi@kernel.org> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Juri Lelli <juri.lelli@redhat.com> Cc: Clark Williams <williams@redhat.com> Cc: John Kacur <jkacur@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Daniel Bristot de Oliveira <bristot@kernel.org> Cc: linux-rt-users@vger.kernel.org Cc: linux-trace-devel@vger.kernel.org Cc: linux-kernel@vger.kernel.org Suggested-by: Steven Rostedt <rostedt@goodmis.org> Suggested-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org> Signed-off-by: Steven Rostedt <rostedt@goodmis.org> |
||
|
Daniel Bristot de Oliveira
|
1eeb6328e8 |
rtla/timerlat: Add timerlat hist mode
The rtla hist hist mode displays a histogram of each tracer event occurrence, both for IRQ and timer latencies. The tool also allows many configurations of the timerlat tracer and the collection of the tracer output. Here is one example of the rtla timerlat hist mode output: ---------- %< ---------- [root@alien ~]# rtla timerlat hist -c 0-3 -d 1M # RTLA timerlat histogram # Time unit is microseconds (us) # Duration: 0 00:01:00 Index IRQ-000 Thr-000 IRQ-001 Thr-001 IRQ-002 Thr-002 IRQ-003 Thr-003 0 58572 0 59373 0 58691 0 58895 0 1 1422 57021 628 57241 1310 56160 1102 56805 2 6 2931 0 2695 0 3567 4 3031 3 1 40 0 53 0 260 0 142 4 0 7 0 5 0 6 0 17 5 0 2 0 5 0 7 0 4 6 0 0 0 2 0 1 0 1 8 0 0 0 0 0 0 0 1 over: 0 0 0 0 0 0 0 0 count: 60001 60001 60001 60001 60001 60001 60001 60001 min: 0 1 0 1 0 1 0 1 avg: 0 1 0 1 0 1 0 1 max: 3 5 1 6 1 6 2 8 ---------- >% ---------- Running - rtla timerlat hist --help provides information about the available options. Link: https://lkml.kernel.org/r/7049ed3c46b7d6aceab18ffe7770003dfc4ddceb.1639158831.git.bristot@kernel.org Cc: Tao Zhou <tao.zhou@linux.dev> Cc: Ingo Molnar <mingo@redhat.com> Cc: Tom Zanussi <zanussi@kernel.org> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Juri Lelli <juri.lelli@redhat.com> Cc: Clark Williams <williams@redhat.com> Cc: John Kacur <jkacur@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Daniel Bristot de Oliveira <bristot@kernel.org> Cc: linux-rt-users@vger.kernel.org Cc: linux-trace-devel@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org> Signed-off-by: Steven Rostedt <rostedt@goodmis.org> |
||
|
Daniel Bristot de Oliveira
|
a828cd18bc |
rtla: Add timerlat tool and timelart top mode
The rtla timerlat tool is an interface for the timerlat tracer.
The timerlat tracer dispatches a kernel thread per-cpu. These threads set a
periodic timer to wake themselves up and go back to sleep. After the
wakeup, they collect and generate useful information for the debugging of
operating system timer latency.
The timerlat tracer outputs information in two ways. It periodically
prints the timer latency at the timer IRQ handler and the Thread handler.
It also provides information for each noise via the osnoise tracepoints.
The rtla timerlat top mode displays a summary of the periodic output from
the timerlat tracer.
Here is one example of the rtla timerlat tool output:
---------- %< ----------
[root@alien ~]# rtla timerlat top -c 0-3 -d 1m
Timer Latency
0 00:01:00 | IRQ Timer Latency (us) | Thread Timer Latency (us)
CPU COUNT | cur min avg max | cur min avg max
0 #60001 | 0 0 0 3 | 1 1 1 6
1 #60001 | 0 0 0 3 | 2 1 1 5
2 #60001 | 0 0 1 6 | 1 1 2 7
3 #60001 | 0 0 0 7 | 1 1 1 11
---------- >% ----------
Running:
# rtla timerlat --help
# rtla timerlat top --help
provides information about the available options.
Link: https://lkml.kernel.org/r/e95032e20c2b88c962195bf7693bb53c9ebcced8.1639158831.git.bristot@kernel.org
Cc: Tao Zhou <tao.zhou@linux.dev>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Tom Zanussi <zanussi@kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Clark Williams <williams@redhat.com>
Cc: John Kacur <jkacur@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Daniel Bristot de Oliveira <bristot@kernel.org>
Cc: linux-rt-users@vger.kernel.org
Cc: linux-trace-devel@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
||
|
Daniel Bristot de Oliveira
|
829a6c0b56 |
rtla/osnoise: Add the hist mode
The rtla osnoise hist tool collects all osnoise:sample_threshold occurrence in a histogram, displaying the results in a user-friendly way. The tool also allows many configurations of the osnoise tracer and the collection of the tracer output. Here is one example of the rtla osnoise hist tool output: ---------- %< ---------- [root@f34 ~]# rtla osnoise hist --bucket-size 10 --entries 100 -c 0-8 -d 1M -r 9000 -P F:1 # RTLA osnoise histogram # Time unit is microseconds (us) # Duration: 0 00:01:00 Index CPU-000 CPU-001 CPU-002 CPU-003 CPU-004 CPU-005 CPU-006 CPU-007 CPU-008 0 430 434 352 455 440 463 467 436 484 10 88 88 92 141 120 100 126 166 100 20 19 7 12 22 8 8 13 13 16 30 6 0 2 0 1 2 2 1 0 50 0 0 0 0 0 0 1 0 0 over: 0 0 0 0 0 0 0 0 0 count: 543 529 458 618 569 573 609 616 600 min: 0 0 0 0 0 0 0 0 0 avg: 0 0 0 0 0 0 0 0 0 max: 30 20 30 20 30 30 50 30 20 ---------- >% ---------- Running - rtla osnoise hist --help provides information about the available options. Link: https://lkml.kernel.org/r/c68060544de89b8b62510ed91c7369f162eb465b.1639158831.git.bristot@kernel.org Cc: Tao Zhou <tao.zhou@linux.dev> Cc: Ingo Molnar <mingo@redhat.com> Cc: Tom Zanussi <zanussi@kernel.org> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Juri Lelli <juri.lelli@redhat.com> Cc: Clark Williams <williams@redhat.com> Cc: John Kacur <jkacur@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Daniel Bristot de Oliveira <bristot@kernel.org> Cc: linux-rt-users@vger.kernel.org Cc: linux-trace-devel@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org> Signed-off-by: Steven Rostedt <rostedt@goodmis.org> |
||
|
Daniel Bristot de Oliveira
|
1eceb2fc2c |
rtla/osnoise: Add osnoise top mode
The rtla osnoise tool is an interface for the osnoise tracer. The
osnoise tracer dispatches a kernel thread per-cpu. These threads read
the time in a loop while with preemption, softirqs and IRQs enabled,
thus allowing all the sources of osnoise during its execution. The
osnoise threads take note of the entry and exit point of any source
of interferences, increasing a per-cpu interference counter. The
osnoise tracer also saves an interference counter for each source
of interference.
The rtla osnoise top mode displays information about the periodic
summary from the osnoise tracer.
One example of rtla osnoise top output is:
[root@alien ~]# rtla osnoise top -c 0-3 -d 1m -q -r 900000 -P F:1
Operating System Noise
duration: 0 00:01:00 | time is in us
CPU Period Runtime Noise % CPU Aval Max Noise Max Single HW NMI IRQ Softirq Thread
0 #58 52200000 1031 99.99802 91 60 0 0 52285 0 101
1 #59 53100000 5 99.99999 5 5 0 9 53122 0 18
2 #59 53100000 7 99.99998 7 7 0 8 53115 0 18
3 #59 53100000 8274 99.98441 277 23 0 9 53778 0 660
"rtla osnoise top --help" works and provide information about the
available options.
Link: https://lkml.kernel.org/r/0d796993abf587ae5a170bb8415c49368d4999e1.1639158831.git.bristot@kernel.org
Cc: Tao Zhou <tao.zhou@linux.dev>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Tom Zanussi <zanussi@kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Clark Williams <williams@redhat.com>
Cc: John Kacur <jkacur@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Daniel Bristot de Oliveira <bristot@kernel.org>
Cc: linux-rt-users@vger.kernel.org
Cc: linux-trace-devel@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
||
|
Daniel Bristot de Oliveira
|
0605bf009f |
rtla: Add osnoise tool
The osnoise tool is the interface for the osnoise tracer. The osnoise tool will have multiple "modes" with different outputs. At this point, no mode is included. The osnoise.c includes the osnoise_context abstraction. It serves to read-save-change-restore the default values from tracing/osnoise/ directory. When the context is deleted, the default values are restored. It also includes some other helper functions for managing osnoise tracer sessions. With these bits and pieces in place, we can start adding some functionality to rtla. Link: https://lkml.kernel.org/r/2d44c21ff561f503b4c7b1813892761818118460.1639158831.git.bristot@kernel.org Cc: Tao Zhou <tao.zhou@linux.dev> Cc: Ingo Molnar <mingo@redhat.com> Cc: Tom Zanussi <zanussi@kernel.org> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Juri Lelli <juri.lelli@redhat.com> Cc: Clark Williams <williams@redhat.com> Cc: John Kacur <jkacur@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Daniel Bristot de Oliveira <bristot@kernel.org> Cc: linux-rt-users@vger.kernel.org Cc: linux-trace-devel@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org> Signed-off-by: Steven Rostedt <rostedt@goodmis.org> |
||
|
Daniel Bristot de Oliveira
|
b1696371d8 |
rtla: Helper functions for rtla
This is a set of utils and tracer helper functions. They are used by rtla mostly to parse config, display data and some trace operations that are not part of libtracefs (because they are only useful it for this case). Link: https://lkml.kernel.org/r/a94c128aba9e6e66d502b7094f2e8c7ac95b12e5.1639158831.git.bristot@kernel.org Cc: Tao Zhou <tao.zhou@linux.dev> Cc: Ingo Molnar <mingo@redhat.com> Cc: Tom Zanussi <zanussi@kernel.org> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Juri Lelli <juri.lelli@redhat.com> Cc: Clark Williams <williams@redhat.com> Cc: John Kacur <jkacur@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Daniel Bristot de Oliveira <bristot@kernel.org> Cc: linux-rt-users@vger.kernel.org Cc: linux-trace-devel@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org> Signed-off-by: Steven Rostedt <rostedt@goodmis.org> |
||
|
Daniel Bristot de Oliveira
|
79ce8f43ac |
rtla: Real-Time Linux Analysis tool
The rtla is a meta-tool that includes a set of commands that aims to analyze the real-time properties of Linux. But instead of testing Linux as a black box, rtla leverages kernel tracing capabilities to provide precise information about the properties and root causes of unexpected results. rtla --help works and provide information about the available options. This is just the "main" and the Makefile, no function yet. Link: https://lkml.kernel.org/r/bf9118ed43a09e6c054c9a491cbe7411ad1acd89.1639158831.git.bristot@kernel.org Cc: Tao Zhou <tao.zhou@linux.dev> Cc: Ingo Molnar <mingo@redhat.com> Cc: Tom Zanussi <zanussi@kernel.org> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Juri Lelli <juri.lelli@redhat.com> Cc: Clark Williams <williams@redhat.com> Cc: John Kacur <jkacur@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Daniel Bristot de Oliveira <bristot@kernel.org> Cc: linux-rt-users@vger.kernel.org Cc: linux-trace-devel@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org> Signed-off-by: Steven Rostedt <rostedt@goodmis.org> |
||
|
Arnaldo Carvalho de Melo
|
486e5ed888 |
tools headers cpufeatures: Sync with the kernel sources
To pick the changes from:
|