If the 'perf iostat' user specifies two or more iio_root_ports and also
specifies the cpu(s) by -C which is not *connected to all* the above iio
ports, the iostat_print_metric() will run into trouble:
For example:
$ perf iostat list
S0-uncore_iio_0<0000:16>
S1-uncore_iio_0<0000:97> # <--- CPU 1 is located in the socket S0
$ perf iostat 0000:16,0000:97 -C 1 -- ls
port Inbound Read(MB) Inbound Write(MB) Outbound Read(MB) Outbound
Write(MB) ../perf-iostat: line 12: 104418 Segmentation fault
(core dumped) perf stat --iostat$DELIMITER$*
The core-dump stack says, in the above corner case, the returned
(struct perf_counts_values *) count will be NULL, and the caller
iostat_print_metric() apparently doesn't not handle this case.
433 struct perf_counts_values *count = perf_counts(evsel->counts, die, 0);
434
435 if (count->run && count->ena) {
(gdb) p count
$1 = (struct perf_counts_values *) 0x0
The deeper reason is that there are actually no statistics from the user
specified pair "iostat 0000:X, -C (disconnected) Y ", but let's fix it with
minimum cost by adding a NULL check in the user space.
Fixes: f9ed693e8b ("perf stat: Enable iostat mode for x86 platforms")
Signed-off-by: Like Xu <likexu@tencent.com>
Cc: Alexander Antonov <alexander.antonov@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20210927081115.39568-2-likexu@tencent.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
An iostate use case like "perf iostat 0000:16,0000:97 -- ls" should be
implemented to work in system-wide mode to ensure that the output from
print_header() is consistent with the user documentation perf-iostat.txt,
rather than incorrectly assuming that the kernel does not support it:
Error:
The sys_perf_event_open() syscall returned with 22 (Invalid argument) \
for event (uncore_iio_0/event=0x83,umask=0x04,ch_mask=0xF,fc_mask=0x07/).
/bin/dmesg | grep -i perf may provide additional information.
This error is easily fixed by assigning system-wide mode by default
for IOSTAT_RUN only when the target cpu_list is unspecified.
Fixes: f07952b179 ("perf stat: Basic support for iostat in perf")
Signed-off-by: Like Xu <likexu@tencent.com>
Cc: Alexander Antonov <alexander.antonov@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20210927081115.39568-1-likexu@tencent.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
If there is no configuration file at first, the user can write any pair
of "key.subkey=value" to the newly created configuration file, while
value validation against a valid configurable key is *deferred* until
the next execution or the implied execution of "perf config ... ".
For example:
$ rm ~/.perfconfig
$ perf config call-graph.dump-size=65529
$ cat ~/.perfconfig
# this file is auto-generated.
[call-graph]
dump-size = 65529
$ perf config call-graph.dump-size=2048
callchain: Incorrect stack dump size (max 65528): 65529
Error: wrong config key-value pair call-graph.dump-size=65529
The user might expect that the second value 2048 is valid and can be
updated to the configuration file, but the error message is very
confusing because the first value 65529 is not reported as an error
during the last configuration.
It is recommended not to change the current behavior of delayed
validation (as more effort is needed), but to refine the original error
message to *clearly indicate* that the cause of the error is the
configuration file.
Signed-off-by: Like Xu <likexu@tencent.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20210924115817.58689-1-likexu@tencent.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Considering that perf and its subcommands have so many parameters, the
documentation is always the first stop for perf beginners. Fixing some
spelling errors will relax the eyes of some readers a little bit.
s/specicfication/specification/
s/caheline/cacheline/
s/tranasaction/transaction/
s/complan/complain/
s/sched_wakep/sched_wakeup/
s/possble/possible/
s/methology/methodology/
Signed-off-by: Like Xu <likexu@tencent.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20210924081942.38368-1-likexu@tencent.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Relative path include works in the regular build due to -I paths but may
fail in other situations.
v2. Rebase. Comments on v1 were that we should handle include paths
differently and it is agreed that can be a sensible refactor but
beyond the scope of this change.
https://lore.kernel.org/lkml/20210504191227.793712-1-irogers@google.com/
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Will Deacon <will@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lore.kernel.org/lkml/20210923154254.737657-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
There is a spelling mistake in the description text, fix it.
Signed-off-by: Colin King <colin.king@canonical.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: kernel-janitors@vger.kernel.org
Link: http://lore.kernel.org/lkml/20210916081314.41751-1-colin.king@canonical.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This test occasionally fails on aarch64 when a sample is taken in
free@plt and it fails with "Bytes read differ from those read by
objdump".
This is because that symbol is near a section boundary in the elf file.
Despite the -z option to always output zeros, objdump uses
bfd_map_over_sections() to iterate through the elf file so it doesn't
see outside of the sections where these zeros are and can't print them.
For example this boundary proceeds free@plt in libc with a gap of 48
bytes between .plt and .text:
objdump -d -z --start-address=0x23cc8 --stop-address=0x23d08 libc-2.30.so
libc-2.30.so: file format elf64-littleaarch64
Disassembly of section .plt:
0000000000023cc8 <*ABS*+0x7fd00@plt+0x8>:
23cc8: 91018210 add x16, x16, #0x60
23ccc: d61f0220 br x17
Disassembly of section .text:
0000000000023d00 <abort@@GLIBC_2.17-0x98>:
23d00: a9bf7bfd stp x29, x30, [sp, #-16]!
23d04: 910003fd mov x29, sp
Taking a sample in free@plt is very rare because it is so small, but the
test can be forced to fail almost every time on any platform by linking
the test with a shared library that has a single empty function and
calling it in a loop.
The fix is to zero the buffers so that when there is a jump in the
addresses output by objdump, zeros are already filled in between.
Signed-off-by: James Clark <james.clark@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lore.kernel.org/lkml/20210906152238.3415467-1-james.clark@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To ensure the stack frames are on the stack tail calls optimizations
need to be inhibited. If your compiler supports an attribute use it,
otherwise use an asm volatile barrier.
The barrier fix was suggested here:
https://lore.kernel.org/lkml/20201028081123.GT2628@hirez.programming.kicks-ass.net/
Tested with an optimized clang build and by forcing the asm barrier
route with an optimized clang build.
A GCC bug tracking a proper disable_tail_calls is:
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=97831
Fixes: 9ae1e990f1 ("perf tools: Remove broken __no_tail_call
attribute")
v2. is a rebase. The original fix patch generated quite a lot of
discussion over the right place for the fix:
https://lore.kernel.org/lkml/20201114000803.909530-1-irogers@google.com/
The patch reflects my preference of it being near the use, so that
future code cleanups don't break this somewhat special usage.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Miguel Ojeda <ojeda@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: clang-built-linux@googlegroups.com
Link: http://lore.kernel.org/lkml/20210922173812.456348-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Perf code re-implements libbpf's btf__load_from_kernel_by_id() API as
a weak function, presumably to dynamically link against old version of
libbpf shared library. Unfortunately this causes compilation warning
when perf is compiled against libbpf v0.6+.
For now, just ignore deprecation warning, but there might be a better
solution, depending on perf's needs.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: kernel-team@fb.com
LPU-Reference: 20210914170004.4185659-1-andrii@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It's later supposed to be either a correct address or NULL. Without the
initialization, it may contain an undefined value which results in the
following segmentation fault:
# perf top --sort comm -g --ignore-callees=do_idle
terminates with:
#0 0x00007ffff56b7685 in __strlen_avx2 () from /lib64/libc.so.6
#1 0x00007ffff55e3802 in strdup () from /lib64/libc.so.6
#2 0x00005555558cb139 in hist_entry__init (callchain_size=<optimized out>, sample_self=true, template=0x7fffde7fb110, he=0x7fffd801c250) at util/hist.c:489
#3 hist_entry__new (template=template@entry=0x7fffde7fb110, sample_self=sample_self@entry=true) at util/hist.c:564
#4 0x00005555558cb4ba in hists__findnew_entry (hists=hists@entry=0x5555561d9e38, entry=entry@entry=0x7fffde7fb110, al=al@entry=0x7fffde7fb420,
sample_self=sample_self@entry=true) at util/hist.c:657
#5 0x00005555558cba1b in __hists__add_entry (hists=hists@entry=0x5555561d9e38, al=0x7fffde7fb420, sym_parent=<optimized out>, bi=bi@entry=0x0, mi=mi@entry=0x0,
sample=sample@entry=0x7fffde7fb4b0, sample_self=true, ops=0x0, block_info=0x0) at util/hist.c:288
#6 0x00005555558cbb70 in hists__add_entry (sample_self=true, sample=0x7fffde7fb4b0, mi=0x0, bi=0x0, sym_parent=<optimized out>, al=<optimized out>, hists=0x5555561d9e38)
at util/hist.c:1056
#7 iter_add_single_cumulative_entry (iter=0x7fffde7fb460, al=<optimized out>) at util/hist.c:1056
#8 0x00005555558cc8a4 in hist_entry_iter__add (iter=iter@entry=0x7fffde7fb460, al=al@entry=0x7fffde7fb420, max_stack_depth=<optimized out>, arg=arg@entry=0x7fffffff7db0)
at util/hist.c:1231
#9 0x00005555557cdc9a in perf_event__process_sample (machine=<optimized out>, sample=0x7fffde7fb4b0, evsel=<optimized out>, event=<optimized out>, tool=0x7fffffff7db0)
at builtin-top.c:842
#10 deliver_event (qe=<optimized out>, qevent=<optimized out>) at builtin-top.c:1202
#11 0x00005555558a9318 in do_flush (show_progress=false, oe=0x7fffffff80e0) at util/ordered-events.c:244
#12 __ordered_events__flush (oe=oe@entry=0x7fffffff80e0, how=how@entry=OE_FLUSH__TOP, timestamp=timestamp@entry=0) at util/ordered-events.c:323
#13 0x00005555558a9789 in __ordered_events__flush (timestamp=<optimized out>, how=<optimized out>, oe=<optimized out>) at util/ordered-events.c:339
#14 ordered_events__flush (how=OE_FLUSH__TOP, oe=0x7fffffff80e0) at util/ordered-events.c:341
#15 ordered_events__flush (oe=oe@entry=0x7fffffff80e0, how=how@entry=OE_FLUSH__TOP) at util/ordered-events.c:339
#16 0x00005555557cd631 in process_thread (arg=0x7fffffff7db0) at builtin-top.c:1114
#17 0x00007ffff7bb817a in start_thread () from /lib64/libpthread.so.0
#18 0x00007ffff5656dc3 in clone () from /lib64/libc.so.6
If you look at the frame #2, the code is:
488 if (he->srcline) {
489 he->srcline = strdup(he->srcline);
490 if (he->srcline == NULL)
491 goto err_rawdata;
492 }
If he->srcline is not NULL (it is not NULL if it is uninitialized rubbish),
it gets strdupped and strdupping a rubbish random string causes the problem.
Also, if you look at the commit 1fb7d06a50, it adds the srcline property
into the struct, but not initializing it everywhere needed.
Committer notes:
Now I see, when using --ignore-callees=do_idle we end up here at line
2189 in add_callchain_ip():
2181 if (al.sym != NULL) {
2182 if (perf_hpp_list.parent && !*parent &&
2183 symbol__match_regex(al.sym, &parent_regex))
2184 *parent = al.sym;
2185 else if (have_ignore_callees && root_al &&
2186 symbol__match_regex(al.sym, &ignore_callees_regex)) {
2187 /* Treat this symbol as the root,
2188 forgetting its callees. */
2189 *root_al = al;
2190 callchain_cursor_reset(cursor);
2191 }
2192 }
And the al that doesn't have the ->srcline field initialized will be
copied to the root_al, so then, back to:
1211 int hist_entry_iter__add(struct hist_entry_iter *iter, struct addr_location *al,
1212 int max_stack_depth, void *arg)
1213 {
1214 int err, err2;
1215 struct map *alm = NULL;
1216
1217 if (al)
1218 alm = map__get(al->map);
1219
1220 err = sample__resolve_callchain(iter->sample, &callchain_cursor, &iter->parent,
1221 iter->evsel, al, max_stack_depth);
1222 if (err) {
1223 map__put(alm);
1224 return err;
1225 }
1226
1227 err = iter->ops->prepare_entry(iter, al);
1228 if (err)
1229 goto out;
1230
1231 err = iter->ops->add_single_entry(iter, al);
1232 if (err)
1233 goto out;
1234
That al at line 1221 is what hist_entry_iter__add() (called from
sample__resolve_callchain()) saw as 'root_al', and then:
iter->ops->add_single_entry(iter, al);
will go on with al->srcline with a bogus value, I'll add the above
sequence to the cset and apply, thanks!
Signed-off-by: Michael Petlan <mpetlan@redhat.com>
CC: Milian Wolff <milian.wolff@kdab.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Fixes: 1fb7d06a50 ("perf report Use srcline from callchain for hist entries")
Link: https //lore.kernel.org/r/20210719145332.29747-1-mpetlan@redhat.com
Reported-by: Juri Lelli <jlelli@redhat.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
set_print_ip_opts() was not being called when type != attr->type
because there is not a one-to-one relationship between output types
and attr->type. That resulted in ip not printing.
The attr_type() function is removed, and the match of attr->type to
output type is corrected.
Example on ADL using taskset to select an atom cpu:
# perf record -e cpu_atom/cpu-cycles/ taskset 0x1000 uname
Linux
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.003 MB perf.data (7 samples) ]
Before:
# perf script | head
taskset 428 [-01] 10394.179041: 1 cpu_atom/cpu-cycles/:
taskset 428 [-01] 10394.179043: 1 cpu_atom/cpu-cycles/:
taskset 428 [-01] 10394.179044: 11 cpu_atom/cpu-cycles/:
taskset 428 [-01] 10394.179045: 407 cpu_atom/cpu-cycles/:
taskset 428 [-01] 10394.179046: 16789 cpu_atom/cpu-cycles/:
taskset 428 [-01] 10394.179052: 676300 cpu_atom/cpu-cycles/:
uname 428 [-01] 10394.179278: 4079859 cpu_atom/cpu-cycles/:
After:
# perf script | head
taskset 428 10394.179041: 1 cpu_atom/cpu-cycles/: ffffffff95a0bb97 __intel_pmu_enable_all.constprop.48+0x47 ([kernel.kallsyms])
taskset 428 10394.179043: 1 cpu_atom/cpu-cycles/: ffffffff95a0bb97 __intel_pmu_enable_all.constprop.48+0x47 ([kernel.kallsyms])
taskset 428 10394.179044: 11 cpu_atom/cpu-cycles/: ffffffff95a0bb97 __intel_pmu_enable_all.constprop.48+0x47 ([kernel.kallsyms])
taskset 428 10394.179045: 407 cpu_atom/cpu-cycles/: ffffffff95a0bb97 __intel_pmu_enable_all.constprop.48+0x47 ([kernel.kallsyms])
taskset 428 10394.179046: 16789 cpu_atom/cpu-cycles/: ffffffff95a0bb97 __intel_pmu_enable_all.constprop.48+0x47 ([kernel.kallsyms])
taskset 428 10394.179052: 676300 cpu_atom/cpu-cycles/: 7f829ef73800 cfree+0x0 (/lib/libc-2.32.so)
uname 428 10394.179278: 4079859 cpu_atom/cpu-cycles/: ffffffff95bae912 vma_interval_tree_remove+0x1f2 ([kernel.kallsyms])
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lore.kernel.org/lkml/20210911133053.15682-1-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Some x86 microarchitectures fuse a subset of cmp/test/ALU instructions
with branch instructions, and thus perf annotate highlight such valid
pairs as fused.
When annotated with source, perf uses struct disasm_line to contain
either source or instruction line from objdump output. Usually, a C
statement generates multiple instructions which include such
cmp/test/ALU + branch instruction pairs. But in case of assembly
function, each individual assembly source line generate one
instruction.
The 'perf annotate' instruction fusion logic assumes the previous
disasm_line as the previous instruction line, which is wrong because,
for assembly function, previous disasm_line contains source line. And
thus perf fails to highlight valid fused instruction pairs for assembly
functions.
Fix it by searching backward until we find an instruction line and
consider that disasm_line as fused with current branch instruction.
Before:
│ cmpq %rcx, RIP+8(%rsp)
0.00 │ cmp %rcx,0x88(%rsp)
│ je .Lerror_bad_iret <--- Source line
0.14 │ ┌──je b4 <--- Instruction line
│ │movl %ecx, %eax
After:
│ cmpq %rcx, RIP+8(%rsp)
0.00 │ ┌──cmp %rcx,0x88(%rsp)
│ │je .Lerror_bad_iret
0.14 │ ├──je b4
│ │movl %ecx, %eax
Reviewed-by: Jin Yao <yao.jin@linux.intel.com>
Signed-off-by: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kim Phillips <kim.phillips@amd.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https //lore.kernel.org/r/20210911043854.8373-1-ravi.bangoria@amd.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Some distributions, like debian, don't link perf with libbfd. Add a
build flag to make this configuration buildable and testable.
This was inspired by:
https://lore.kernel.org/linux-perf-users/20210910102307.2055484-1-tonyg@leastfixedpoint.com/T/#u
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: tony garnock-jones <tonyg@leastfixedpoint.com>
Link: http://lore.kernel.org/lkml/20210910225756.729087-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently perf saves a build-id with size but old versions assumes the
size of 20. In case the build-id is less than 20 (like for MD5), it'd
fill the rest with 0s.
I saw a problem when old version of perf record saved a binary in the
build-id cache and new version of perf reads the data. The symbols
should be read from the build-id cache (as the path no longer has the
same binary) but it failed due to mismatch in the build-id.
symsrc__init: build id mismatch for /home/namhyung/.debug/.build-id/53/e4c2f42a4c61a2d632d92a72afa08f00000000/elf.
The build-id event in the data has 20 byte build-ids, but it saw a
different size (16) when it reads the build-id of the elf file in the
build-id cache.
$ readelf -n ~/.debug/.build-id/53/e4c2f42a4c61a2d632d92a72afa08f00000000/elf
Displaying notes found in: .note.gnu.build-id
Owner Data size Description
GNU 0x00000010 NT_GNU_BUILD_ID (unique build ID bitstring)
Build ID: 53e4c2f42a4c61a2d632d92a72afa08f
Let's fix this by allowing trailing zeros if the size is different.
Fixes: 39be8d0115 ("perf tools: Pass build_id object to dso__build_id_equal()")
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20210910224630.1084877-1-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Factor out copy_config_terms() and free_config_terms() so that they can
be reused.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Link: https //lore.kernel.org/r/20210909125508.28693-2-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When building directly on the checked out repository the build process
produces a file that should be ignored, so add it to .gitignore.
Fixes: a81df63a5d ("perf doc: Fix doc.dep")
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20210910232249.739661-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The btf__get_from_id() function was deprecated in favour of
btf__load_from_kernel_by_id(), but it is still avaiable, so use it to
provide a weak function btf__load_from_kernel_by_id() for older libbpf
when building perf with LIBBPF_DYNAMIC=1, i.e. using the system's libbpf
package.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Previously the regext expected MOVE_MOUNT_[FT]_*, but in the next patch
a flag that doesn't match that expression will be added, MOVE_MOUNT_SET_GROUP
To make this more future proof, take advantage of the fact that the only
one we don't need to cover is MOVE_MOUNT__MASK and use MOVE_MOUNT_[^_]+_*_.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Perf records IBS (Instruction Based Sampling) extra sample data when
'perf record --raw-samples' is used with an IBS-compatible event, on a
machine that supports IBS. IBS support is indicated in
CPUID_Fn80000001_ECX bit #10.
Up until now, users have been able to see the extra sample data solely
in raw hex format using 'perf report --dump-raw-trace'. From there,
users could decode the data either manually, or by using an external
script.
Enable the built-in 'perf report --dump-raw-trace' to do the decoding of
the extra sample data bits, so manual or external script decoding isn't
necessary.
Example usage:
$ sudo perf record -c 10000001 -a --raw-samples -e ibs_fetch/rand_en=1/,ibs_op/cnt_ctl=1/ -C 0,1 taskset -c 0,1 7za b -mmt2 | perf report --dump-raw-trace
Stdout contains IBS Fetch samples, e.g.:
ibs_fetch_ctl: 02170007ffffffff MaxCnt 1048560 Cnt 1048560 Lat 7 En 1 Val 1 Comp 1 IcMiss 0 PhyAddrValid 1 L1TlbPgSz 4KB L1TlbMiss 0 L2TlbMiss 0 RandEn 1 L2Miss 0
IbsFetchLinAd: 000056016b2ead40
IbsFetchPhysAd: 000000115cedfd40
c_ibs_ext_ctl: 0000000000000000 IbsItlbRefillLat 0
..and IBS Op samples, e.g.:
ibs_op_ctl: 0000009e009e8968 MaxCnt 10000000 En 1 Val 1 CntCtl 1=uOps CurCnt 158
IbsOpRip: 000056016b2ea73d
ibs_op_data: 00000000000b0002 CompToRetCtr 2 TagToRetCtr 11 BrnRet 0 RipInvalid 0 BrnFuse 0 Microcode 0
ibs_op_data2: 0000000000000002 CacheHitSt 0=M-state RmtNode 0 DataSrc 2=Local node cache
ibs_op_data3: 0000000000c60002 LdOp 0 StOp 1 DcL1TlbMiss 0 DcL2TlbMiss 0 DcL1TlbHit2M 0 DcL1TlbHit1G 0 DcL2TlbHit2M 0 DcMiss 0 DcMisAcc 0 DcWcMemAcc 0 DcUcMemAcc 0 DcLockedOp 0 DcMissNoMabAlloc 0 DcLinAddrValid 1 DcPhyAddrValid 1 DcL2TlbHit1G 0 L2Miss 0 SwPf 0 OpMemWidth 4 bytes OpDcMissOpenMemReqs 0 DcMissLat 0 TlbRefillLat 0
IbsDCLinAd: 00007f133c319ce0
IbsDCPhysAd: 0000000270485ce0
Committer notes:
Fixed up this:
util/amd-sample-raw.c: In function ‘evlist__amd_sample_raw’:
util/amd-sample-raw.c:125:42: error: ‘ bytes’ directive output may be truncated writing 6 bytes into a region of size between 4 and 7 [-Werror=format-truncation=]
125 | " OpMemWidth %2d bytes", 1 << (reg.op_mem_width - 1));
| ^~~~~~
In file included from /usr/include/stdio.h:866,
from util/amd-sample-raw.c:7:
/usr/include/bits/stdio2.h:71:10: note: ‘__builtin___snprintf_chk’ output between 21 and 24 bytes into a destination of size 21
71 | return __builtin___snprintf_chk (__s, __n, __USE_FORTIFY_LEVEL - 1,
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
72 | __glibc_objsize (__s), __fmt,
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
73 | __va_arg_pack ());
| ~~~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors
As that %2d won't limit the number of chars to 2, just state that 2 is
the minimal width:
$ cat printf.c
#include <stdio.h>
#include <stdlib.h>
int main(int argc, char *argv[])
{
char bf[64];
int len = snprintf(bf, sizeof(bf), "%2d", atoi(argv[1]));
printf("strlen(%s): %u\n", bf, len);
return 0;
}
$ ./printf 1
strlen( 1): 2
$ ./printf 12
strlen(12): 2
$ ./printf 123
strlen(123): 3
$ ./printf 1234
strlen(1234): 4
$ ./printf 12345
strlen(12345): 5
$ ./printf 123456
strlen(123456): 6
$
And since we probably don't want that output to be truncated, just
assume the worst case, as the compiler did, and add a few more chars to
that buffer.
Also use sizeof(var) instead of sizeof(dup-of-wanted-format-string) to
avoid bugs when changing one but not the other.
I also had to change this:
-#include <asm/amd-ibs.h>
+#include "../../arch/x86/include/asm/amd-ibs.h"
To make it build on other architectures, just like intel-pt does.
Signed-off-by: Kim Phillips <kim.phillips@amd.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Joao Martins <joao.m.martins@oracle.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Robert Richter <robert.richter@amd.com>
Cc: Stephane Eranian <eranian@google.com>
Link: https //lore.kernel.org/r/20210817221509.88391-4-kim.phillips@amd.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This is a tools/-side patch for the patch that adds the original copy
of the IBS header file, in arch/x86/include/asm/.
We also add an entry to check-headers.sh, so future changes continue
to be copied.
Committer notes:
Had to add this
-#include <asm/msr-index.h>
+#include "msr-index.h"
And change the check-headers.sh entry to ignore this line when diffing
with the original kernel header.
This is needed so that we can use 'perf report' on a perf.data with IBS
data on a !x86 system, i.e. building on ARM fails without this as there
is no asm/msr-index.h there.
This was done on the next patch in this series and is done for things
like Intel PT and ARM CoreSight.
Signed-off-by: Kim Phillips <kim.phillips@amd.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Joao Martins <joao.m.martins@oracle.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Robert Richter <robert.richter@amd.com>
Cc: Stephane Eranian <eranian@google.com>
Link: https //lore.kernel.org/r/20210817221509.88391-3-kim.phillips@amd.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To be used by IBS raw data display: It needs the recorder's cpuid in
order to determine which errata workarounds to apply to the data, and
the pmu_mappings are needed in order to figure out which PMU sample
type is IBS Fetch vs. IBS Op.
When not available from perf.data, we assume local operation, and
retrieve cpuid and pmu mappings directly from the running system.
Signed-off-by: Kim Phillips <kim.phillips@amd.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Joao Martins <joao.m.martins@oracle.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Robert Richter <robert.richter@amd.com>
Cc: Stephane Eranian <eranian@google.com>
Link: https //lore.kernel.org/r/20210817221509.88391-2-kim.phillips@amd.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Instead of using the file offset in the debug file.
This fixes a regression from 00a3423492 ("perf symbols: Make
dso__load_bfd_symbols() load PE files from debug cache only"), causing
incorrect symbol resolution when debug file have been stripped from
non-debug sections (in which case its .text section is empty and doesn't
have any file position).
The debug files could also be created with a different file alignment,
and have different file positions from the mmap-ed binary, or have the
section reordered.
This instead looks for the file image base, using the corresponding bfd
*ABS* symbols. As PE symbols only have 4 bytes, it also needs to keep
.text section vma high bits.
Signed-off-by: Remi Bernon <rbernon@codeweavers.com>
Fixes: 00a3423492 ("perf symbols: Make dso__load_bfd_symbols() load PE files from debug cache only")
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Nicholas Fraser <nfraser@codeweavers.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20210909192637.4139125-1-rbernon@codeweavers.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The '--' prevented arguments from being passed to the script, such as:
$ perf script report stackcollapse -i my_perf.data
Signed-off-by: Michael Petlan <mpetlan@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
LPU-Reference: 20200427142327.21172-1-mpetlan@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To pick the changes in these csets:
59ab844eed ("compat: remove some compat entry points")
dce4910396 ("mm: wire up syscall process_mrelease")
b48c7236b1 ("exit/bdflush: Remove the deprecated bdflush system call")
That add support for this new syscall in tools such as 'perf trace'.
For instance, this is now possible:
# perf trace -v -e process_mrelease
event qualifier tracepoint filter: (common_pid != 19351 && common_pid != 9112) && (id == 448)
^C#
That is the filter expression attached to the raw_syscalls:sys_{enter,exit}
tracepoints.
$ grep process_mrelease tools/perf/arch/x86/entry/syscalls/syscall_64.tbl
448 common process_mrelease sys_process_mrelease
$
This addresses these perf build warnings:
Warning: Kernel ABI header at 'tools/include/uapi/asm-generic/unistd.h' differs from latest version at 'include/uapi/asm-generic/unistd.h'
diff -u tools/include/uapi/asm-generic/unistd.h include/uapi/asm-generic/unistd.h
Warning: Kernel ABI header at 'tools/perf/arch/x86/entry/syscalls/syscall_64.tbl' differs from latest version at 'arch/x86/entry/syscalls/syscall_64.tbl'
diff -u tools/perf/arch/x86/entry/syscalls/syscall_64.tbl arch/x86/entry/syscalls/syscall_64.tbl
Warning: Kernel ABI header at 'tools/perf/arch/powerpc/entry/syscalls/syscall.tbl' differs from latest version at 'arch/powerpc/kernel/syscalls/syscall.tbl'
diff -u tools/perf/arch/powerpc/entry/syscalls/syscall.tbl arch/powerpc/kernel/syscalls/syscall.tbl
Warning: Kernel ABI header at 'tools/perf/arch/s390/entry/syscalls/syscall.tbl' differs from latest version at 'arch/s390/kernel/syscalls/syscall.tbl'
diff -u tools/perf/arch/s390/entry/syscalls/syscall.tbl arch/s390/kernel/syscalls/syscall.tbl
Warning: Kernel ABI header at 'tools/perf/arch/mips/entry/syscalls/syscall_n64.tbl' differs from latest version at 'arch/mips/kernel/syscalls/syscall_n64.tbl'
diff -u tools/perf/arch/mips/entry/syscalls/syscall_n64.tbl arch/mips/kernel/syscalls/syscall_n64.tbl
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To pick the changes in:
Fixes: d32f89da7f ("net: add accept helper not installing fd")
Fixes: bc49d8169a ("mctp: Add MCTP base")
This automagically adds support for the AF_MCTP protocol domain:
$ tools/perf/trace/beauty/socket.sh > before
$ cp include/linux/socket.h tools/perf/trace/beauty/include/linux/socket.h
$ tools/perf/trace/beauty/socket.sh > after
$ diff -u before after
--- before 2021-09-06 11:57:14.972747200 -0300
+++ after 2021-09-06 11:57:30.541920222 -0300
@@ -44,4 +44,5 @@
[42] = "QIPCRTR",
[43] = "SMC",
[44] = "XDP",
+ [45] = "MCTP",
};
$
This will allow 'perf trace' to translate 45 into "MCTP" as is done with
the other domains:
# perf trace -e socket*
0.000 chronyd/1029 socket(family: INET, type: DGRAM|CLOEXEC|NONBLOCK, protocol: IP) = 4
^C#
This addresses this perf build warning:
Warning: Kernel ABI header at 'tools/perf/trace/beauty/include/linux/socket.h' differs from latest version at 'include/linux/socket.h'
diff -u tools/perf/trace/beauty/include/linux/socket.h include/linux/socket.h
Cc: David S. Miller <davem@davemloft.net>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Jeremy Kerr <jk@codeconstruct.com.au>
Cc: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Merge more updates from Andrew Morton:
"147 patches, based on 7d2a07b769.
Subsystems affected by this patch series: mm (memory-hotplug, rmap,
ioremap, highmem, cleanups, secretmem, kfence, damon, and vmscan),
alpha, percpu, procfs, misc, core-kernel, MAINTAINERS, lib,
checkpatch, epoll, init, nilfs2, coredump, fork, pids, criu, kconfig,
selftests, ipc, and scripts"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (94 commits)
scripts: check_extable: fix typo in user error message
mm/workingset: correct kernel-doc notations
ipc: replace costly bailout check in sysvipc_find_ipc()
selftests/memfd: remove unused variable
Kconfig.debug: drop selecting non-existing HARDLOCKUP_DETECTOR_ARCH
configs: remove the obsolete CONFIG_INPUT_POLLDEV
prctl: allow to setup brk for et_dyn executables
pid: cleanup the stale comment mentioning pidmap_init().
kernel/fork.c: unexport get_{mm,task}_exe_file
coredump: fix memleak in dump_vma_snapshot()
fs/coredump.c: log if a core dump is aborted due to changed file permissions
nilfs2: use refcount_dec_and_lock() to fix potential UAF
nilfs2: fix memory leak in nilfs_sysfs_delete_snapshot_group
nilfs2: fix memory leak in nilfs_sysfs_create_snapshot_group
nilfs2: fix memory leak in nilfs_sysfs_delete_##name##_group
nilfs2: fix memory leak in nilfs_sysfs_create_##name##_group
nilfs2: fix NULL pointer in nilfs_##name##_attr_release
nilfs2: fix memory leak in nilfs_sysfs_create_device_group
trap: cleanup trap_init()
init: move usermodehelper_enable() to populate_rootfs()
...
Rename bitmap_alloc() to bitmap_zalloc() in tools to follow the bitmap API
in the kernel.
No functional changes intended.
Link: https://lkml.kernel.org/r/20210814211713.180533-14-yury.norov@gmail.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Yury Norov <yury.norov@gmail.com>
Suggested-by: Yury Norov <yury.norov@gmail.com>
Acked-by: Yury Norov <yury.norov@gmail.com>
Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Lobakin <alobakin@pm.me>
Cc: Alexey Klimov <aklimov@redhat.com>
Cc: Dennis Zhou <dennis@kernel.org>
Cc: Ulf Hansson <ulf.hansson@linaro.org>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
New features:
- Improvements for the flamegraph python script, including:
- Display perf.data header
- Display PIDs of user stacks
- Added option to change color scheme
- Default to blue/green color scheme to improve accessibility
- Correctly identify kernel stacks when debuginfo is available
- Improvements for 'perf bench futex':
- Add --mlockall parameter
- Add --broadcast and --pi to the 'requeue' sub benchmark
- Add support for PMU aliases.
- Introduce an ARM Coresight ETE decoder.
- Add a 'perf bench' entry for evlist open/close operations, to help quantify
improvements with multithreading 'perf record'.
- Allow reporting the [un]throttle PERF_RECORD_ meta event in 'perf script's
python scripting.
- Add a 'perf test' entry for PMU aliases.
- Add a 'perf test' entry for 'perf record/perf report/perf script' pipe mode.
Fixes:
- perf script dlfilter (API for filtering via dynamically loaded shared object
introduced in v5.14) fixes and a 'perf test' entry for it.
- Fix get_current_dir_name() compilation on Android.
- Fix issues with asciidoc and double dashes uses.
- Fix memory leaks in the BTF handling code.
- Fix leftover problems in the Documentation from the infrastructure originally
lifted from the git codebase.
- Fix *probe_vfs_getname.sh 'perf test' failures.
- Handle fd gaps in 'perf test's test__dso_data_reopen().
- Make sure to show disasembly warnings for 'perf annotate --stdio'.
- Fix output from pipe to file and vice-versa in 'perf record/report/script'.
- Correct 'perf data -h' output.
- Fix wrong comm in system-wide mode with 'perf record --delay'.
- Do not allow --for-each-cgroup without cpu in 'perf stat'
- Make 'perf test --skip' work on shell tests.
- Fix libperf's verbose printing.
Misc improvements:
- Preparatory patches for multithreading varios 'perf record' phases
(synthesizing, opening, recording, etc).
- Add sparse context/locking annotations in compiler-types.h, also to help with
the multithreading effort.
- Optimize the generation of the arch specific erno tables used in 'perf trace'.
- Optimize libperf's perf_cpu_map__max().
- Improve ARM's CoreSight warnings.
- Report collisions in AUX records.
- Improve warnings for the LLVM 'perf test' entry.
- Improve the PMU events 'perf test' codebase.
- perf test: Do not compare overheads in the zstd comp test
- Better support annotation on ARM.
- Update 'perf trace's cmd string table to decode sys_bpf() first arg.
Vendor events:
- Add JSON events and metrics for Intel's Ice Lake, Tiger Lake and Elhart Lake.
- Update JSON eventsand metrics for Intel's Cascade Lake and Sky Lake servers.
Hardware tracing:
- Improvements for the ARM hardware tracing auxtrace support.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQR2GiIUctdOfX2qHhGyPKLppCJ+JwUCYTO8OAAKCRCyPKLppCJ+
J/N0AQCTAfxKsVyh9vjIY5vwHvNkYMDM4Wvs7TmlfXbVgKLP3AEA0wYlTyar/teI
NC6jQpipxpWASFUJbLSmU8qn/XFXwQo=
=4r0w
-----END PGP SIGNATURE-----
Merge tag 'perf-tools-for-v5.15-2021-09-04' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux
Pull perf tool updates from Arnaldo Carvalho de Melo:
"New features:
- Improvements for the flamegraph python script, including:
- Display perf.data header
- Display PIDs of user stacks
- Added option to change color scheme
- Default to blue/green color scheme to improve accessibility
- Correctly identify kernel stacks when debuginfo is available
- Improvements for 'perf bench futex':
- Add --mlockall parameter
- Add --broadcast and --pi to the 'requeue' sub benchmark
- Add support for PMU aliases.
- Introduce an ARM Coresight ETE decoder.
- Add a 'perf bench' entry for evlist open/close operations, to help
quantify improvements with multithreading 'perf record'.
- Allow reporting the [un]throttle PERF_RECORD_ meta event in 'perf
script's python scripting.
- Add a 'perf test' entry for PMU aliases.
- Add a 'perf test' entry for 'perf record/perf report/perf script'
pipe mode.
Fixes:
- perf script dlfilter (API for filtering via dynamically loaded
shared object introduced in v5.14) fixes and a 'perf test' entry
for it.
- Fix get_current_dir_name() compilation on Android.
- Fix issues with asciidoc and double dashes uses.
- Fix memory leaks in the BTF handling code.
- Fix leftover problems in the Documentation from the infrastructure
originally lifted from the git codebase.
- Fix *probe_vfs_getname.sh 'perf test' failures.
- Handle fd gaps in 'perf test's test__dso_data_reopen().
- Make sure to show disasembly warnings for 'perf annotate --stdio'.
- Fix output from pipe to file and vice-versa in 'perf
record/report/script'.
- Correct 'perf data -h' output.
- Fix wrong comm in system-wide mode with 'perf record --delay'.
- Do not allow --for-each-cgroup without cpu in 'perf stat'
- Make 'perf test --skip' work on shell tests.
- Fix libperf's verbose printing.
Misc improvements:
- Preparatory patches for multithreading various 'perf record' phases
(synthesizing, opening, recording, etc).
- Add sparse context/locking annotations in compiler-types.h, also to
help with the multithreading effort.
- Optimize the generation of the arch specific erno tables used in
'perf trace'.
- Optimize libperf's perf_cpu_map__max().
- Improve ARM's CoreSight warnings.
- Report collisions in AUX records.
- Improve warnings for the LLVM 'perf test' entry.
- Improve the PMU events 'perf test' codebase.
- perf test: Do not compare overheads in the zstd comp test
- Better support annotation on ARM.
- Update 'perf trace's cmd string table to decode sys_bpf() first
arg.
Vendor events:
- Add JSON events and metrics for Intel's Ice Lake, Tiger Lake and
Elhart Lake.
- Update JSON eventsand metrics for Intel's Cascade Lake and Sky Lake
servers.
Hardware tracing:
- Improvements for the ARM hardware tracing auxtrace support"
* tag 'perf-tools-for-v5.15-2021-09-04' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (130 commits)
perf tests: Add test for PMU aliases
perf pmu: Add PMU alias support
perf session: Report collisions in AUX records
perf script python: Allow reporting the [un]throttle PERF_RECORD_ meta event
perf build: Report failure for testing feature libopencsd
perf cs-etm: Show a warning for an unknown magic number
perf cs-etm: Print the decoder name
perf cs-etm: Create ETE decoder
perf cs-etm: Update OpenCSD decoder for ETE
perf cs-etm: Fix typo
perf cs-etm: Save TRCDEVARCH register
perf cs-etm: Refactor out ETMv4 header saving
perf cs-etm: Initialise architecture based on TRCIDR1
perf cs-etm: Refactor initialisation of decoder params.
tools build: Fix feature detect clean for out of source builds
perf evlist: Add evlist__for_each_entry_from() macro
perf evsel: Handle precise_ip fallback in evsel__open_cpu()
perf evsel: Move bpf_counter__install_pe() to success path in evsel__open_cpu()
perf evsel: Move test_attr__open() to success path in evsel__open_cpu()
perf evsel: Move ignore_missing_thread() to fallback code
...
A perf uncore PMU may have two PMU names, a real name and an alias.
Add one test case to verify that the real and alias names have the same
effect.
Iterate sysfs to get one event which has an alias and create an evlist
by adding two evsels. Evsel1 is created by event and evsel2 is created
by alias.
Test asserts:
evsel1->core.attr.type == evsel2->core.attr.type
evsel1->core.attr.config == evsel2->core.attr.config
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jin Yao <yao.jin@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.garry@huawei.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Riccardo Mancini <rickyman7@gmail.com>
Link: http://lore.kernel.org/lkml/20210902065955.1299-3-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
A perf uncore PMU may have two PMU names, a real name and an alias. The
alias is exported at /sys/bus/event_source/devices/uncore_*/alias.
The perf tool should support the alias as well.
Add alias_name in the struct perf_pmu to store the alias. For the PMU
which doesn't have an alias. It's NULL.
Introduce two X86 specific functions to retrieve the real name and the
alias separately.
Only go through the sysfs to retrieve the mapping between the real name
and the alias once. The result is cached in a list, uncore_pmu_list.
Nothing changed for the other ARCHs.
With the patch, the perf tool can monitor the PMU with either the real
name or the alias.
Use the real name,
$ perf stat -e uncore_cha_2/event=1/ -x,
4044879584,,uncore_cha_2/event=1/,2528059205,100.00,,
Use the alias,
$ perf stat -e uncore_type_0_2/event=1/ -x,
3659675336,,uncore_type_0_2/event=1/,2287306455,100.00,,
Committer notes:
Rename 'struct perf_pmu_alias_name' to 'pmu_alias', the 'perf_' prefix
should be used for libperf, things inside just tools/perf/ are being
moved away from that prefix.
Also 'pmu_alias' is shorter and reflects the abstraction.
Also don't use 'pmu' as the name for variables for that type, we should
use that for the 'struct perf_pmu' variables, avoiding confusion. Use
'pmu_alias' for 'struct pmu_alias' variables.
Co-developed-by: Jin Yao <yao.jin@linux.intel.com>
Co-developed-by: Arnaldo Carvalho de Melo <acme@kernel.org>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.garry@huawei.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Riccardo Mancini <rickyman7@gmail.com>
Link: http://lore.kernel.org/lkml/20210902065955.1299-2-yao.jin@linux.intel.com
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Just like the other flags in the AUX records, report a summary of the
Collisions if there were any.
Signed-off-by: Suzuki Poulouse <suzuki.poulose@arm.com>
Reviewed-by: Leo Yan <leo.yan@linaro.org>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: coresight@lists.linaro.org
Cc: linux-arm-kernel@lists.infradead.org
LPU-Reference: 20210728091219.527886-1-suzuki.poulose@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf_events may sometimes throttle an event due to creating too many
samples during a given timer tick.
As of now, the perf tool will not report on throttling, which means this
is a silent error.
Implement a callback for the throttle and unthrottle events within the
Python scripting engine, which can allow scripts to detect and report
when events may have been lost due to throttling.
The simplest script to report throttle events is:
def throttle(*args):
print("throttle" + repr(args))
def unthrottle(*args):
print("unthrottle" + repr(args))
Signed-off-by: Stephen Brennan <stephen.s.brennan@oracle.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20210901210815.133251-1-stephen.s.brennan@oracle.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When build perf tool with passing option 'CORESIGHT=1' explicitly, if
the feature test fails for library libopencsd, the build doesn't
complain the feature failure and continue to build the tool with
disabling the CoreSight feature insteadly.
This patch changes the building behaviour, when build perf tool with the
option 'CORESIGHT=1' and detect the failure for testing feature
libopencsd, the build process will be aborted and it shows the complaint
info.
Committer testing:
First make sure there is no opencsd library installed:
$ rpm -qa | grep -i csd
$ sudo rm -rf `find /usr/local -name "*csd*"`
$ find /usr/local -name "*csd*"
$
Then cleanup the perf build output directory:
$ rm -rf /tmp/build/perf ; mkdir -p /tmp/build/perf ;
$
And try to build explicitely asking for coresight:
$ make O=/tmp/build/perf CORESIGHT=1 O=/tmp/build/perf -C tools/perf install-bin
make: Entering directory '/var/home/acme/git/perf/tools/perf'
BUILD: Doing 'make -j24' parallel build
HOSTCC /tmp/build/perf/fixdep.o
HOSTLD /tmp/build/perf/fixdep-in.o
LINK /tmp/build/perf/fixdep
Makefile.config:493: *** Error: No libopencsd library found or the version is not up-to-date. Please install recent libopencsd to build with CORESIGHT=1. Stop.
make[1]: *** [Makefile.perf:238: sub-make] Error 2
make: *** [Makefile:113: install-bin] Error 2
make: Leaving directory '/var/home/acme/git/perf/tools/perf'
$
Now install the opencsd library present in Fedora 34:
$ sudo dnf install opencsd-devel
<SNIP>
Installed:
opencsd-1.0.0-1.fc34.x86_64 opencsd-devel-1.0.0-1.fc34.x86_64
Complete!
$
Try again building with coresight:
$ make O=/tmp/build/perf CORESIGHT=1 O=/tmp/build/perf -C tools/perf install-bin
make: Entering directory '/var/home/acme/git/perf/tools/perf'
BUILD: Doing 'make -j24' parallel build
Makefile.config:493: *** Error: No libopencsd library found or the version is not up-to-date. Please install recent libopencsd to build with CORESIGHT=1. Stop.
make[1]: *** [Makefile.perf:238: sub-make] Error 2
make: *** [Makefile:113: install-bin] Error 2
make: Leaving directory '/var/home/acme/git/perf/tools/perf'
$
Since Fedora 34 is pretty recent, one assumes we need to get it from its
upstream git repository, use rpm to find where that is:
$ rpm -q --qf "%{URL}\n" opencsd
https://github.com/Linaro/OpenCSD
$
Go there, clone the repo, build it and install into /usr/local, then try
again:
$ cd ~acme/git/perf
$ make O=/tmp/build/perf VF=1 CORESIGHT=1 O=/tmp/build/perf -C tools/perf install-bin | grep -i opencsd
... libopencsd: [ on ]
PERF_VERSION = 5.14.g454719f67a3d
$ export LD_LIBRARY_PATH=/usr/local/lib
$ ldd ~/bin/perf | grep opencsd
libopencsd_c_api.so.1 => /usr/local/lib/libopencsd_c_api.so.1 (0x00007f28f78a4000)
libopencsd.so.1 => /usr/local/lib/libopencsd.so.1 (0x00007f28f6a2e000)
$
Now it works.
Requested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: coresight@lists.linaro.org
Link: http://lore.kernel.org/lkml/20210902081800.550016-1-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently perf reports "Cannot allocate memory" which isn't very helpful
for a potentially user facing issue. If we add a new magic number in
the future, perf will be able to report unrecognised magic numbers.
Reviewed-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: James Clark <james.clark@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: coresight@lists.linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Link: https //lore.kernel.org/r/20210806134109.1182235-10-james.clark@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Use the real name of the decoder instead of hard-coding "ETM" to avoid
confusion when the trace is ETE. This also now distinguishes between
ETMv3 and ETMv4.
Reviewed-by: Leo Yan <leo.yan@linaro.org>
Reviewed-by: Suzuki Poulouse <suzuki.poulose@arm.com>
Signed-off-by: James Clark <james.clark@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: coresight@lists.linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Link: https //lore.kernel.org/r/20210806134109.1182235-9-james.clark@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
If the magic number indicates ETE instantiate a OCSD_BUILTIN_DCD_ETE
decoder instead of OCSD_BUILTIN_DCD_ETMV4I. ETE is the new trace feature
for Armv9.
Testing performed
=================
* Old files with v0 and v1 headers for ETMv4 still open correctly
* New files with new magic number open on new versions of perf
* New files with new magic number fail to open on old versions of perf
* Decoding with the ETE decoder results in the same output as the ETMv4
decoder as long as there are no new ETE packet types
Reviewed-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: James Clark <james.clark@arm.com>
Acked-by: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: coresight@lists.linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Link: https //lore.kernel.org/r/20210806134109.1182235-8-james.clark@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
OpenCSD v1.1.1 has a bug fix for the installation of the ETE decoder
headers. This also means that including headers separately for each
decoder is unnecessary so remove these.
Reviewed-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: James Clark <james.clark@arm.com>
Acked-by: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: coresight@lists.linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Link: https //lore.kernel.org/r/20210806134109.1182235-7-james.clark@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
TRCIRD2 should be TRCIDR2
Reviewed-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: James Clark <james.clark@arm.com>
Acked-by: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: coresight@lists.linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Link: https //lore.kernel.org/r/20210806134109.1182235-6-james.clark@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When ETE is present save the TRCDEVARCH register and set a new magic
number. It will be used to configure the decoder in a later commit.
Old versions of perf will not be able to open files with this new magic
number, but old files will still work with newer versions of perf.
Reviewed-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: James Clark <james.clark@arm.com>
Acked-by: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: coresight@lists.linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Link: https //lore.kernel.org/r/20210806134109.1182235-5-james.clark@arm.com
[ Addressed some cosmetic suggestions by Suzuki Poulouse ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Extract a function for saving the ETMv4 header because this will be used
for ETE in a later commit.
Reviewed-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: James Clark <james.clark@arm.com>
Acked-by: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: coresight@lists.linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Link: https //lore.kernel.org/r/20210806134109.1182235-4-james.clark@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently the architecture is hard coded as ARCH_V8, but from ETMv4.4
onwards this should be ARCH_AA64.
Reviewed-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: James Clark <james.clark@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: coresight@lists.linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Link: https //lore.kernel.org/r/20210806134109.1182235-3-james.clark@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The initialisation of the decoder params is duplicated between
creation of the packet printer and packet decoder. Put them both
into one function so that future changes only need to be made in one
place.
Reviewed-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: James Clark <james.clark@arm.com>
Acked-by: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: coresight@lists.linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Link: https //lore.kernel.org/r/20210806134109.1182235-2-james.clark@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Pull exit cleanups from Eric Biederman:
"In preparation of doing something about PTRACE_EVENT_EXIT I have
started cleaning up various pieces of code related to do_exit. Most of
that code I did not manage to get tested and reviewed before the merge
window opened but a handful of very useful cleanups are ready to be
merged.
The first change is simply the removal of the bdflush system call. The
code has now been disabled long enough that even the oldest userspace
working userspace setups anyone can find to test are fine with the
bdflush system call being removed.
Changing m68k fsp040_die to use force_sigsegv(SIGSEGV) instead of
calling do_exit directly is interesting only in that it is nearly the
most difficult of the incorrect uses of do_exit to remove.
The change to the seccomp code to simply send a signal instead of
calling do_coredump directly is a very nice little cleanup made
possible by realizing the existing signal sending helpers were missing
a little bit of functionality that is easy to provide"
* 'exit-cleanups-for-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
signal/seccomp: Dump core when there is only one live thread
signal/seccomp: Refactor seccomp signal and coredump generation
signal/m68k: Use force_sigsegv(SIGSEGV) in fpsp040_die
exit/bdflush: Remove the deprecated bdflush system call
This patch adds a new iteration macro for evlist that resumes iteration
from a given evsel in the evlist.
This macro will be used in the workqueue series.
Signed-off-by: Riccardo Mancini <rickyman7@gmail.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/2386505f8b598adf0dbcd04ec21804c6bcf00826.1629490974.git.rickyman7@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This is another patch in the effort to separate the fallback mechanisms
from the open itself.
In case of precise_ip fallback, the original precise_ip will be stored
in the evsel (it was stored in a local variable) and the open will be
retried. Since the precise_ip fallback will be the first in the chain of
fallbacks, there should be no functional change with this patch.
Signed-off-by: Riccardo Mancini <rickyman7@gmail.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/74208c433d2024a6c4af9c0b140b54ed6b5ea810.1629490974.git.rickyman7@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
I don't see why bpf_counter__install_pe() should get called even if
fd = -1, so I'm moving it to the success path.
This will be useful in following patches to separate the actual open and
the related operations from the fallback mechanisms.
Signed-off-by: Riccardo Mancini <rickyman7@gmail.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Link: http://lore.kernel.org/lkml/64f8a1b0a838a6e6049cd43c1beafd432999ae57.1629490974.git.rickyman7@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
test_attr__open() ignores the fd if -1, therefore it is safe to move it to
the success path (fd >= 0).
Signed-off-by: Riccardo Mancini <rickyman7@gmail.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/b3baf11360ca96541c9631730614fd7d217496fc.1629490974.git.rickyman7@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
