Make namespace.c being built without requiring
CONFIG_CIFS_DFS_UPCALL=y by moving set_dest_addr() to dfs.c and call
it at the beginning of dfs_mount_share() so it can chase the DFS link
starting from the correct server in @ctx->dstaddr.
Signed-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Automount code will handle both DFS links and reparse mount points.
Also, get rid of BUG_ON() in cifs_release_automount_timer() while
we're at it.
Signed-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
The automount code will handle both DFS links and reparse files that
are mount points.
Signed-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
If @out_iov and @out_buftype are passed, then return compounded
responses regardless whether the request failed or not. This will be
useful for detecting reparse points on SMB2_CREATE responses as
specified in MS-SMB2 2.2.14.
No functional changes.
Signed-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Instead of passing @adjust_tz and some reparse point related fields as
parameters in ->query_path_info() and
{smb311_posix,cifs}_info_to_fattr() calls, move them to
cifs_open_info_data structure as they can be easily accessed through
@data.
No functional changes.
Signed-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
With current implementation, when a nested DFS link is found during
mount(2), the client follows the referral and then try to connect to
all of its targets. If all targets failed, the client bails out
rather than retrying remaining targets from previous referral.
Fix this by stacking all referrals and targets so the client can retry
remaining targets from previous referrals in case all targets of
current referral have failed.
Thanks to samba, this can be easily tested like below
* Run the following under dfs folder in samba server
$ ln -s "msdfs:srv\\bad-share" link1
$ ln -s "msdfs:srv\\dfs\\link1,srv\\good-share" link0
* Before patch
$ mount.cifs //srv/dfs/link0 /mnt -o ...
mount error(2): No such file or directory
Refer to the mount.cifs(8) manual page (e.g. man mount.cifs)...
* After patch
$ mount.cifs //srv/dfs/link0 /mnt -o ...
# ls /mnt
bar fileshare1 sub
Signed-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Add new helper which declares and initialises target list of a DFS
referral rather having to do both separately.
No functional changes.
Signed-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Commit abdb1742a3 removed code that clears ctx->username when sec=none, so attempting
to mount with '-o sec=none' now fails with -EACCES. Fix it by adding that logic to the
parsing of the 'sec' option, as well as checking if the mount is using null auth before
setting the username when parsing the 'user' option.
Fixes: abdb1742a3 ("cifs: get rid of mount options string parsing")
Cc: stable@vger.kernel.org
Signed-off-by: Scott Mayhew <smayhew@redhat.com>
Reviewed-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
We recently had problems where a network namespace was deleted
causing hard to debug reconnect problems. To help deal with
configuration issues like this it is useful to dump the network
namespace to better debug what happened.
So add this to information displayed in /proc/fs/cifs/DebugData for
the server (and channels if mounted with multichannel). For example:
Local Users To Server: 1 SecMode: 0x1 Req On Wire: 0 Net namespace: 4026531840
This can be easily compared with what is displayed for the
processes on the system. For example /proc/1/ns/net in this case
showed the same thing (see below), and we can see that the namespace
is still valid in this example.
'net:[4026531840]'
Cc: stable@vger.kernel.org
Acked-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Under the current code, when cifs_readpage_worker is called, the call
contract is that the callee should unlock the page. This is documented
in the read_folio section of Documentation/filesystems/vfs.rst as:
> The filesystem should unlock the folio once the read has completed,
> whether it was successful or not.
Without this change, when fscache is in use and cache hit occurs during
a read, the page lock is leaked, producing the following stack on
subsequent reads (via mmap) to the page:
$ cat /proc/3890/task/12864/stack
[<0>] folio_wait_bit_common+0x124/0x350
[<0>] filemap_read_folio+0xad/0xf0
[<0>] filemap_fault+0x8b1/0xab0
[<0>] __do_fault+0x39/0x150
[<0>] do_fault+0x25c/0x3e0
[<0>] __handle_mm_fault+0x6ca/0xc70
[<0>] handle_mm_fault+0xe9/0x350
[<0>] do_user_addr_fault+0x225/0x6c0
[<0>] exc_page_fault+0x84/0x1b0
[<0>] asm_exc_page_fault+0x27/0x30
This requires a reboot to resolve; it is a deadlock.
Note however that the call to cifs_readpage_from_fscache does mark the
page clean, but does not free the folio lock. This happens in
__cifs_readpage_from_fscache on success. Releasing the lock at that
point however is not appropriate as cifs_readahead also calls
cifs_readpage_from_fscache and *does* unconditionally release the lock
after its return. This change therefore effectively makes
cifs_readpage_worker work like cifs_readahead.
Signed-off-by: Russell Harmon <russ@har.mn>
Acked-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Reviewed-by: David Howells <dhowells@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
With deferred close we can have closes that race with lease breaks,
and so with the current checks for whether to send the lease response,
oplock_response(), this can mean that an unmount (kill_sb) can occur
just before we were checking if the tcon->ses is valid. See below:
[Fri Aug 4 04:12:50 2023] RIP: 0010:cifs_oplock_break+0x1f7/0x5b0 [cifs]
[Fri Aug 4 04:12:50 2023] Code: 7d a8 48 8b 7d c0 c0 e9 02 48 89 45 b8 41 89 cf e8 3e f5 ff ff 4c 89 f7 41 83 e7 01 e8 82 b3 03 f2 49 8b 45 50 48 85 c0 74 5e <48> 83 78 60 00 74 57 45 84 ff 75 52 48 8b 43 98 48 83 eb 68 48 39
[Fri Aug 4 04:12:50 2023] RSP: 0018:ffffb30607ddbdf8 EFLAGS: 00010206
[Fri Aug 4 04:12:50 2023] RAX: 632d223d32612022 RBX: ffff97136944b1e0 RCX: 0000000080100009
[Fri Aug 4 04:12:50 2023] RDX: 0000000000000001 RSI: 0000000080100009 RDI: ffff97136944b188
[Fri Aug 4 04:12:50 2023] RBP: ffffb30607ddbe58 R08: 0000000000000001 R09: ffffffffc08e0900
[Fri Aug 4 04:12:50 2023] R10: 0000000000000001 R11: 000000000000000f R12: ffff97136944b138
[Fri Aug 4 04:12:50 2023] R13: ffff97149147c000 R14: ffff97136944b188 R15: 0000000000000000
[Fri Aug 4 04:12:50 2023] FS: 0000000000000000(0000) GS:ffff9714f7c00000(0000) knlGS:0000000000000000
[Fri Aug 4 04:12:50 2023] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[Fri Aug 4 04:12:50 2023] CR2: 00007fd8de9c7590 CR3: 000000011228e000 CR4: 0000000000350ef0
[Fri Aug 4 04:12:50 2023] Call Trace:
[Fri Aug 4 04:12:50 2023] <TASK>
[Fri Aug 4 04:12:50 2023] process_one_work+0x225/0x3d0
[Fri Aug 4 04:12:50 2023] worker_thread+0x4d/0x3e0
[Fri Aug 4 04:12:50 2023] ? process_one_work+0x3d0/0x3d0
[Fri Aug 4 04:12:50 2023] kthread+0x12a/0x150
[Fri Aug 4 04:12:50 2023] ? set_kthread_struct+0x50/0x50
[Fri Aug 4 04:12:50 2023] ret_from_fork+0x22/0x30
[Fri Aug 4 04:12:50 2023] </TASK>
To fix this change the ordering of the checks before sending the oplock_response
to first check if the openFileList is empty.
Fixes: da787d5b74 ("SMB3: Do not send lease break acknowledgment if all file handles have been closed")
Suggested-by: Bharath SM <bharathsm@microsoft.com>
Reviewed-by: Bharath SM <bharathsm@microsoft.com>
Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Customer reported that they couldn't mount their DFS link that was
seen by the client as a DFS interlink -- special form of DFS link
where its single target may point to a different DFS namespace -- and
it turned out that it was just a regular DFS link where its referral
header flags missed the StorageServers bit thus making the client
think it couldn't tree connect to target directly without requiring
further referrals.
When the DFS link referral header flags misses the StoraServers bit
and its target doesn't respond to any referrals, then tree connect to
it.
Fixes: a1c0d00572 ("cifs: share dfs connections and supers")
Cc: stable@vger.kernel.org
Signed-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Whenever a tlink is obtained by cifs_sb_tlink, we need
to check that the tlink returned is not an error.
It was missing with the last change here.
Fixes: b3edef6b9c ("cifs: allow dumping keys for directories too")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
The NTLMSSP_NEGOTIATE_VERSION flag only needs to be sent during
the NTLMSSP NEGOTIATE (not the AUTH) request, so filter it out for
NTLMSSP AUTH requests. See MS-NLMP 2.2.1.3
This fixes a problem found by the gssntlmssp server.
Link: https://github.com/gssapi/gss-ntlmssp/issues/95
Fixes: 52d005337b ("smb3: send NTLMSSP version information")
Acked-by: Roy Shterman <roy.shterman@gmail.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
We need to specify charset, like "iocharset=utf-8", in mount options for
Chinese path if the nls_default don't support it, such as iso8859-1, the
default value for CONFIG_NLS_DEFAULT.
But now in reconnection the nls_default is used, instead of the one we
specified and used in mount, and this can lead to mount failure.
Signed-off-by: Winston Wen <wentao@uniontech.com>
Reviewed-by: Paulo Alcantara <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Dumping the enc/dec keys is a session wide operation.
And it should not matter if the ioctl was run on
a regular file or a directory.
Currently, we obtain the tcon pointer from the
cifs file handle. But since there's no dir open call
in cifs, this is not populated for dirs.
This change allows dumping of session keys using ioctl
even for directories. To do this, we'll now get the
tcon pointer from the superblock, and not from the file
handle.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
When the number of responses with status of STATUS_IO_TIMEOUT
exceeds a specified threshold (NUM_STATUS_IO_TIMEOUT), we reconnect
the connection. But we do not return the mid, or the credits
returned for the mid, or reduce the number of in-flight requests.
This bug could result in the server->in_flight count to go bad,
and also cause a leak in the mids.
This change moves the check to a few lines below where the
response is decrypted, even of the response is read from the
transform header. This way, the code for returning the mids
can be reused.
Also, the cifs_reconnect was reconnecting just the transport
connection before. In case of multi-channel, this may not be
what we want to do after several timeouts. Changed that to
reconnect the session and the tree too.
Also renamed NUM_STATUS_IO_TIMEOUT to a more appropriate name
MAX_STATUS_IO_TIMEOUT.
Fixes: 8e670f77c4 ("Handle STATUS_IO_TIMEOUT gracefully")
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Currently, is_network_name_deleted and it's implementations
do not return anything if the network name did get deleted.
So the function doesn't fully achieve what it advertizes.
Changed the function to return a bool instead. It will now
return true if the error returned is STATUS_NETWORK_NAME_DELETED
and the share (tree id) was found to be connected. It returns
false otherwise.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Acked-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Use new cifs_smb_ses_inc_refcount() helper to get an active reference
of @ses and @ses->dfs_root_ses (if set). This will prevent
@ses->dfs_root_ses of being put in the next call to cifs_put_smb_ses()
and thus potentially causing an use-after-free bug.
Fixes: 8e3554150d ("cifs: fix sharing of DFS connections")
Signed-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
pSMB->hdr.Protocol is an array of size 4 bytes, hence when the compiler
analyzes this line of code
parm_data = ((char *) &pSMB->hdr.Protocol) + offset;
it legitimately complains about the fact that offset points outside the
bounds of the array. Notice that the compiler gives priority to the object
as an array, rather than merely the address of one more byte in a structure
to wich offset should be added (which seems to be the actual intention of
the original implementation).
Fix this by explicitly instructing the compiler to treat the code as a
sequence of bytes in struct smb_com_transaction2_spi_req, and not as an
array accessed through pointer notation.
Notice that ((char *)pSMB) + sizeof(pSMB->hdr.smb_buf_length) points to
the same address as ((char *) &pSMB->hdr.Protocol), therefore this results
in no differences in binary output.
Fixes the following -Wstringop-overflow warnings when built s390
architecture with defconfig (GCC 13):
CC [M] fs/smb/client/cifssmb.o
In function 'cifs_init_ace',
inlined from 'posix_acl_to_cifs' at fs/smb/client/cifssmb.c:3046:3,
inlined from 'cifs_do_set_acl' at fs/smb/client/cifssmb.c:3191:15:
fs/smb/client/cifssmb.c:2987:31: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=]
2987 | cifs_ace->cifs_e_perm = local_ace->e_perm;
| ~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~
In file included from fs/smb/client/cifssmb.c:27:
fs/smb/client/cifspdu.h: In function 'cifs_do_set_acl':
fs/smb/client/cifspdu.h:384:14: note: at offset [7, 11] into destination object 'Protocol' of size 4
384 | __u8 Protocol[4];
| ^~~~~~~~
In function 'cifs_init_ace',
inlined from 'posix_acl_to_cifs' at fs/smb/client/cifssmb.c:3046:3,
inlined from 'cifs_do_set_acl' at fs/smb/client/cifssmb.c:3191:15:
fs/smb/client/cifssmb.c:2988:30: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=]
2988 | cifs_ace->cifs_e_tag = local_ace->e_tag;
| ~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~
fs/smb/client/cifspdu.h: In function 'cifs_do_set_acl':
fs/smb/client/cifspdu.h:384:14: note: at offset [6, 10] into destination object 'Protocol' of size 4
384 | __u8 Protocol[4];
| ^~~~~~~~
This helps with the ongoing efforts to globally enable
-Wstringop-overflow.
Link: https://github.com/KSPP/linux/issues/310
Fixes: dc1af4c4b4 ("cifs: implement set acl method")
Cc: stable@vger.kernel.org
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
If defer close timeout value is set to 0, then there is no
need to include files in the deferred close list and utilize
the delayed worker for closing. Instead, we can close them
immediately.
Signed-off-by: Bharath SM <bharathsm@microsoft.com>
Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>
Cc: stable@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
-----BEGIN PGP SIGNATURE-----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=F8D0
-----END PGP SIGNATURE-----
Merge tag '6.5-rc-smb3-client-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6
Pull more smb client updates from Steve French:
- fix potential use after free in unmount
- minor cleanup
- add worker to cleanup stale directory leases
* tag '6.5-rc-smb3-client-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6:
cifs: Add a laundromat thread for cached directories
smb: client: remove redundant pointer 'server'
cifs: fix session state transition to avoid use-after-free issue
These are cleanups for architecture specific header files:
- the comments in include/linux/syscalls.h have gone out of sync
and are really pointless, so these get removed
- The asm/bitsperlong.h header no longer needs to be architecture
specific on modern compilers, so use a generic version for newer
architectures that use new enough userspace compilers
- A cleanup for virt_to_pfn/virt_to_bus to have proper type
checking, forcing the use of pointers
-----BEGIN PGP SIGNATURE-----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=S/he
-----END PGP SIGNATURE-----
Merge tag 'asm-generic-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic
Pull asm-generic updates from Arnd Bergmann:
"These are cleanups for architecture specific header files:
- the comments in include/linux/syscalls.h have gone out of sync and
are really pointless, so these get removed
- The asm/bitsperlong.h header no longer needs to be architecture
specific on modern compilers, so use a generic version for newer
architectures that use new enough userspace compilers
- A cleanup for virt_to_pfn/virt_to_bus to have proper type checking,
forcing the use of pointers"
* tag 'asm-generic-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
syscalls: Remove file path comments from headers
tools arch: Remove uapi bitsperlong.h of hexagon and microblaze
asm-generic: Unify uapi bitsperlong.h for arm64, riscv and loongarch
m68k/mm: Make pfn accessors static inlines
arm64: memory: Make virt_to_pfn() a static inline
ARM: mm: Make virt_to_pfn() a static inline
asm-generic/page.h: Make pfn accessors static inlines
xen/netback: Pass (void *) to virt_to_page()
netfs: Pass a pointer to virt_to_page()
cifs: Pass a pointer to virt_to_page() in cifsglob
cifs: Pass a pointer to virt_to_page()
riscv: mm: init: Pass a pointer to virt_to_page()
ARC: init: Pass a pointer to virt_to_pfn() in init
m68k: Pass a pointer to virt_to_pfn() virt_to_page()
fs/proc/kcore.c: Pass a pointer to virt_addr_valid()
The pointer 'server' is assigned but never read, the pointer is
redundant and can be removed. Cleans up clang scan build warning:
fs/smb/client/dfs.c:217:3: warning: Value stored to 'server' is
never read [deadcode.DeadStores]
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
We switch session state to SES_EXITING without cifs_tcp_ses_lock now,
it may lead to potential use-after-free issue.
Consider the following execution processes:
Thread 1:
__cifs_put_smb_ses()
spin_lock(&cifs_tcp_ses_lock)
if (--ses->ses_count > 0)
spin_unlock(&cifs_tcp_ses_lock)
return
spin_unlock(&cifs_tcp_ses_lock)
---> **GAP**
spin_lock(&ses->ses_lock)
if (ses->ses_status == SES_GOOD)
ses->ses_status = SES_EXITING
spin_unlock(&ses->ses_lock)
Thread 2:
cifs_find_smb_ses()
spin_lock(&cifs_tcp_ses_lock)
list_for_each_entry(ses, ...)
spin_lock(&ses->ses_lock)
if (ses->ses_status == SES_EXITING)
spin_unlock(&ses->ses_lock)
continue
...
spin_unlock(&ses->ses_lock)
if (ret)
cifs_smb_ses_inc_refcount(ret)
spin_unlock(&cifs_tcp_ses_lock)
If thread 1 is preempted in the gap and thread 2 start executing, thread 2
will get the session, and soon thread 1 will switch the session state to
SES_EXITING and start releasing it, even though thread 1 had increased the
session's refcount and still uses it.
So switch session state under cifs_tcp_ses_lock to eliminate this gap.
Signed-off-by: Winston Wen <wentao@uniontech.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
-----BEGIN PGP SIGNATURE-----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=dyvQ
-----END PGP SIGNATURE-----
Merge tag '6.5-rc-smb3-client-fixes-part1' of git://git.samba.org/sfrench/cifs-2.6
Pull smb client updates from Steve French:
- Deferred close fix
- Debugging improvements: display missing mount option, dump rc on
invalidate inode failures, print client_guid in DebugData, log
session id when matching session not found in reconnect, new dynamic
tracepoint for session not found
- Mount fixes including: potential null dereference, and possible
memory leak and path name parsing when double slashes
- Fix potential use after free in compounding
- Two crediting (flow control) fixes: fix for crediting leak (stress
scenario with excess lease credits) and better locking around
updating credits
- Three cleanups from issues pointed out by the kernel test robot
- Session state check improvements (including for potential use after
free)
- DFS fixes: Fix for getattr on link when DFS disabled, fix for DFS
mounts to same share with different prefix paths, DFS mount error
checking improvement
* tag '6.5-rc-smb3-client-fixes-part1' of git://git.samba.org/sfrench/cifs-2.6:
cifs: new dynamic tracepoint to track ses not found errors
cifs: log session id when a matching ses is not found
smb: client: improve DFS mount check
smb: client: fix shared DFS root mounts with different prefixes
smb: client: fix parsing of source mount option
smb: client: fix broken file attrs with nodfs mounts
cifs: print client_guid in DebugData
cifs: fix session state check in smb2_find_smb_ses
cifs: fix session state check in reconnect to avoid use-after-free issue
cifs: do all necessary checks for credits within or before locking
cifs: prevent use-after-free by freeing the cfile later
smb: client: fix warning in generic_ip_connect()
smb: client: fix warning in CIFSFindNext()
smb: client: fix warning in CIFSFindFirst()
smb3: do not reserve too many oplock credits
cifs: print more detail when invalidate_inode_mapping fails
smb: client: fix warning in cifs_smb3_do_mount()
smb: client: fix warning in cifs_match_super()
cifs: print nosharesock value while dumping mount options
SMB3: Do not send lease break acknowledgment if all file handles have been closed
It is perfectly valid to not find session not found errors
when a reconnect of a session happens when requests for the
same session are happening in parallel.
We had these log messages as VFS logs. My last change dumped
these logs as FYI logs.
This change just creates a new dynamic tracepoint to capture
events of this type, just in case it is useful while
debugging issues in the future.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
We do not log the session id in crypt_setup when a matching
session is not found. Printing the session id helps debugging
here. This change does just that.
This change also changes this log to FYI, since it is normal to
see then during a reconnect. Doing the same for a similar log
in case of signed connections.
The plan is to have a tracepoint for this event, so that we will
be able to see this event if need be. That will be done as
another change.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Core
----
- Rework the sendpage & splice implementations. Instead of feeding
data into sockets page by page extend sendmsg handlers to support
taking a reference on the data, controlled by a new flag called
MSG_SPLICE_PAGES. Rework the handling of unexpected-end-of-file
to invoke an additional callback instead of trying to predict what
the right combination of MORE/NOTLAST flags is.
Remove the MSG_SENDPAGE_NOTLAST flag completely.
- Implement SCM_PIDFD, a new type of CMSG type analogous to
SCM_CREDENTIALS, but it contains pidfd instead of plain pid.
- Enable socket busy polling with CONFIG_RT.
- Improve reliability and efficiency of reporting for ref_tracker.
- Auto-generate a user space C library for various Netlink families.
Protocols
---------
- Allow TCP to shrink the advertised window when necessary, prevent
sk_rcvbuf auto-tuning from growing the window all the way up to
tcp_rmem[2].
- Use per-VMA locking for "page-flipping" TCP receive zerocopy.
- Prepare TCP for device-to-device data transfers, by making sure
that payloads are always attached to skbs as page frags.
- Make the backoff time for the first N TCP SYN retransmissions
linear. Exponential backoff is unnecessarily conservative.
- Create a new MPTCP getsockopt to retrieve all info (MPTCP_FULL_INFO).
- Avoid waking up applications using TLS sockets until we have
a full record.
- Allow using kernel memory for protocol ioctl callbacks, paving
the way to issuing ioctls over io_uring.
- Add nolocalbypass option to VxLAN, forcing packets to be fully
encapsulated even if they are destined for a local IP address.
- Make TCPv4 use consistent hash in TIME_WAIT and SYN_RECV. Ensure
in-kernel ECMP implementation (e.g. Open vSwitch) select the same
link for all packets. Support L4 symmetric hashing in Open vSwitch.
- PPPoE: make number of hash bits configurable.
- Allow DNS to be overwritten by DHCPACK in the in-kernel DHCP client
(ipconfig).
- Add layer 2 miss indication and filtering, allowing higher layers
(e.g. ACL filters) to make forwarding decisions based on whether
packet matched forwarding state in lower devices (bridge).
- Support matching on Connectivity Fault Management (CFM) packets.
- Hide the "link becomes ready" IPv6 messages by demoting their
printk level to debug.
- HSR: don't enable promiscuous mode if device offloads the proto.
- Support active scanning in IEEE 802.15.4.
- Continue work on Multi-Link Operation for WiFi 7.
BPF
---
- Add precision propagation for subprogs and callbacks. This allows
maintaining verification efficiency when subprograms are used,
or in fact passing the verifier at all for complex programs,
especially those using open-coded iterators.
- Improve BPF's {g,s}setsockopt() length handling. Previously BPF
assumed the length is always equal to the amount of written data.
But some protos allow passing a NULL buffer to discover what
the output buffer *should* be, without writing anything.
- Accept dynptr memory as memory arguments passed to helpers.
- Add routing table ID to bpf_fib_lookup BPF helper.
- Support O_PATH FDs in BPF_OBJ_PIN and BPF_OBJ_GET commands.
- Drop bpf_capable() check in BPF_MAP_FREEZE command (used to mark
maps as read-only).
- Show target_{obj,btf}_id in tracing link fdinfo.
- Addition of several new kfuncs (most of the names are self-explanatory):
- Add a set of new dynptr kfuncs: bpf_dynptr_adjust(),
bpf_dynptr_is_null(), bpf_dynptr_is_rdonly(), bpf_dynptr_size()
and bpf_dynptr_clone().
- bpf_task_under_cgroup()
- bpf_sock_destroy() - force closing sockets
- bpf_cpumask_first_and(), rework bpf_cpumask_any*() kfuncs
Netfilter
---------
- Relax set/map validation checks in nf_tables. Allow checking
presence of an entry in a map without using the value.
- Increase ip_vs_conn_tab_bits range for 64BIT builds.
- Allow updating size of a set.
- Improve NAT tuple selection when connection is closing.
Driver API
----------
- Integrate netdev with LED subsystem, to allow configuring HW
"offloaded" blinking of LEDs based on link state and activity
(i.e. packets coming in and out).
- Support configuring rate selection pins of SFP modules.
- Factor Clause 73 auto-negotiation code out of the drivers, provide
common helper routines.
- Add more fool-proof helpers for managing lifetime of MDIO devices
associated with the PCS layer.
- Allow drivers to report advanced statistics related to Time Aware
scheduler offload (taprio).
- Allow opting out of VF statistics in link dump, to allow more VFs
to fit into the message.
- Split devlink instance and devlink port operations.
New hardware / drivers
----------------------
- Ethernet:
- Synopsys EMAC4 IP support (stmmac)
- Marvell 88E6361 8 port (5x1GE + 3x2.5GE) switches
- Marvell 88E6250 7 port switches
- Microchip LAN8650/1 Rev.B0 PHYs
- MediaTek MT7981/MT7988 built-in 1GE PHY driver
- WiFi:
- Realtek RTL8192FU, 2.4 GHz, b/g/n mode, 2T2R, 300 Mbps
- Realtek RTL8723DS (SDIO variant)
- Realtek RTL8851BE
- CAN:
- Fintek F81604
Drivers
-------
- Ethernet NICs:
- Intel (100G, ice):
- support dynamic interrupt allocation
- use meta data match instead of VF MAC addr on slow-path
- nVidia/Mellanox:
- extend link aggregation to handle 4, rather than just 2 ports
- spawn sub-functions without any features by default
- OcteonTX2:
- support HTB (Tx scheduling/QoS) offload
- make RSS hash generation configurable
- support selecting Rx queue using TC filters
- Wangxun (ngbe/txgbe):
- add basic Tx/Rx packet offloads
- add phylink support (SFP/PCS control)
- Freescale/NXP (enetc):
- report TAPRIO packet statistics
- Solarflare/AMD:
- support matching on IP ToS and UDP source port of outer header
- VxLAN and GENEVE tunnel encapsulation over IPv4 or IPv6
- add devlink dev info support for EF10
- Virtual NICs:
- Microsoft vNIC:
- size the Rx indirection table based on requested configuration
- support VLAN tagging
- Amazon vNIC:
- try to reuse Rx buffers if not fully consumed, useful for ARM
servers running with 16kB pages
- Google vNIC:
- support TCP segmentation of >64kB frames
- Ethernet embedded switches:
- Marvell (mv88e6xxx):
- enable USXGMII (88E6191X)
- Microchip:
- lan966x: add support for Egress Stage 0 ACL engine
- lan966x: support mapping packet priority to internal switch
priority (based on PCP or DSCP)
- Ethernet PHYs:
- Broadcom PHYs:
- support for Wake-on-LAN for BCM54210E/B50212E
- report LPI counter
- Microsemi PHYs: support RGMII delay configuration (VSC85xx)
- Micrel PHYs: receive timestamp in the frame (LAN8841)
- Realtek PHYs: support optional external PHY clock
- Altera TSE PCS: merge the driver into Lynx PCS which it is
a variant of
- CAN: Kvaser PCIEcan:
- support packet timestamping
- WiFi:
- Intel (iwlwifi):
- major update for new firmware and Multi-Link Operation (MLO)
- configuration rework to drop test devices and split
the different families
- support for segmented PNVM images and power tables
- new vendor entries for PPAG (platform antenna gain) feature
- Qualcomm 802.11ax (ath11k):
- Multiple Basic Service Set Identifier (MBSSID) and
Enhanced MBSSID Advertisement (EMA) support in AP mode
- support factory test mode
- RealTek (rtw89):
- add RSSI based antenna diversity
- support U-NII-4 channels on 5 GHz band
- RealTek (rtl8xxxu):
- AP mode support for 8188f
- support USB RX aggregation for the newer chips
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=9i4I
-----END PGP SIGNATURE-----
Merge tag 'net-next-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking changes from Jakub Kicinski:
"WiFi 7 and sendpage changes are the biggest pieces of work for this
release. The latter will definitely require fixes but I think that we
got it to a reasonable point.
Core:
- Rework the sendpage & splice implementations
Instead of feeding data into sockets page by page extend sendmsg
handlers to support taking a reference on the data, controlled by a
new flag called MSG_SPLICE_PAGES
Rework the handling of unexpected-end-of-file to invoke an
additional callback instead of trying to predict what the right
combination of MORE/NOTLAST flags is
Remove the MSG_SENDPAGE_NOTLAST flag completely
- Implement SCM_PIDFD, a new type of CMSG type analogous to
SCM_CREDENTIALS, but it contains pidfd instead of plain pid
- Enable socket busy polling with CONFIG_RT
- Improve reliability and efficiency of reporting for ref_tracker
- Auto-generate a user space C library for various Netlink families
Protocols:
- Allow TCP to shrink the advertised window when necessary, prevent
sk_rcvbuf auto-tuning from growing the window all the way up to
tcp_rmem[2]
- Use per-VMA locking for "page-flipping" TCP receive zerocopy
- Prepare TCP for device-to-device data transfers, by making sure
that payloads are always attached to skbs as page frags
- Make the backoff time for the first N TCP SYN retransmissions
linear. Exponential backoff is unnecessarily conservative
- Create a new MPTCP getsockopt to retrieve all info
(MPTCP_FULL_INFO)
- Avoid waking up applications using TLS sockets until we have a full
record
- Allow using kernel memory for protocol ioctl callbacks, paving the
way to issuing ioctls over io_uring
- Add nolocalbypass option to VxLAN, forcing packets to be fully
encapsulated even if they are destined for a local IP address
- Make TCPv4 use consistent hash in TIME_WAIT and SYN_RECV. Ensure
in-kernel ECMP implementation (e.g. Open vSwitch) select the same
link for all packets. Support L4 symmetric hashing in Open vSwitch
- PPPoE: make number of hash bits configurable
- Allow DNS to be overwritten by DHCPACK in the in-kernel DHCP client
(ipconfig)
- Add layer 2 miss indication and filtering, allowing higher layers
(e.g. ACL filters) to make forwarding decisions based on whether
packet matched forwarding state in lower devices (bridge)
- Support matching on Connectivity Fault Management (CFM) packets
- Hide the "link becomes ready" IPv6 messages by demoting their
printk level to debug
- HSR: don't enable promiscuous mode if device offloads the proto
- Support active scanning in IEEE 802.15.4
- Continue work on Multi-Link Operation for WiFi 7
BPF:
- Add precision propagation for subprogs and callbacks. This allows
maintaining verification efficiency when subprograms are used, or
in fact passing the verifier at all for complex programs,
especially those using open-coded iterators
- Improve BPF's {g,s}setsockopt() length handling. Previously BPF
assumed the length is always equal to the amount of written data.
But some protos allow passing a NULL buffer to discover what the
output buffer *should* be, without writing anything
- Accept dynptr memory as memory arguments passed to helpers
- Add routing table ID to bpf_fib_lookup BPF helper
- Support O_PATH FDs in BPF_OBJ_PIN and BPF_OBJ_GET commands
- Drop bpf_capable() check in BPF_MAP_FREEZE command (used to mark
maps as read-only)
- Show target_{obj,btf}_id in tracing link fdinfo
- Addition of several new kfuncs (most of the names are
self-explanatory):
- Add a set of new dynptr kfuncs: bpf_dynptr_adjust(),
bpf_dynptr_is_null(), bpf_dynptr_is_rdonly(), bpf_dynptr_size()
and bpf_dynptr_clone().
- bpf_task_under_cgroup()
- bpf_sock_destroy() - force closing sockets
- bpf_cpumask_first_and(), rework bpf_cpumask_any*() kfuncs
Netfilter:
- Relax set/map validation checks in nf_tables. Allow checking
presence of an entry in a map without using the value
- Increase ip_vs_conn_tab_bits range for 64BIT builds
- Allow updating size of a set
- Improve NAT tuple selection when connection is closing
Driver API:
- Integrate netdev with LED subsystem, to allow configuring HW
"offloaded" blinking of LEDs based on link state and activity
(i.e. packets coming in and out)
- Support configuring rate selection pins of SFP modules
- Factor Clause 73 auto-negotiation code out of the drivers, provide
common helper routines
- Add more fool-proof helpers for managing lifetime of MDIO devices
associated with the PCS layer
- Allow drivers to report advanced statistics related to Time Aware
scheduler offload (taprio)
- Allow opting out of VF statistics in link dump, to allow more VFs
to fit into the message
- Split devlink instance and devlink port operations
New hardware / drivers:
- Ethernet:
- Synopsys EMAC4 IP support (stmmac)
- Marvell 88E6361 8 port (5x1GE + 3x2.5GE) switches
- Marvell 88E6250 7 port switches
- Microchip LAN8650/1 Rev.B0 PHYs
- MediaTek MT7981/MT7988 built-in 1GE PHY driver
- WiFi:
- Realtek RTL8192FU, 2.4 GHz, b/g/n mode, 2T2R, 300 Mbps
- Realtek RTL8723DS (SDIO variant)
- Realtek RTL8851BE
- CAN:
- Fintek F81604
Drivers:
- Ethernet NICs:
- Intel (100G, ice):
- support dynamic interrupt allocation
- use meta data match instead of VF MAC addr on slow-path
- nVidia/Mellanox:
- extend link aggregation to handle 4, rather than just 2 ports
- spawn sub-functions without any features by default
- OcteonTX2:
- support HTB (Tx scheduling/QoS) offload
- make RSS hash generation configurable
- support selecting Rx queue using TC filters
- Wangxun (ngbe/txgbe):
- add basic Tx/Rx packet offloads
- add phylink support (SFP/PCS control)
- Freescale/NXP (enetc):
- report TAPRIO packet statistics
- Solarflare/AMD:
- support matching on IP ToS and UDP source port of outer
header
- VxLAN and GENEVE tunnel encapsulation over IPv4 or IPv6
- add devlink dev info support for EF10
- Virtual NICs:
- Microsoft vNIC:
- size the Rx indirection table based on requested
configuration
- support VLAN tagging
- Amazon vNIC:
- try to reuse Rx buffers if not fully consumed, useful for ARM
servers running with 16kB pages
- Google vNIC:
- support TCP segmentation of >64kB frames
- Ethernet embedded switches:
- Marvell (mv88e6xxx):
- enable USXGMII (88E6191X)
- Microchip:
- lan966x: add support for Egress Stage 0 ACL engine
- lan966x: support mapping packet priority to internal switch
priority (based on PCP or DSCP)
- Ethernet PHYs:
- Broadcom PHYs:
- support for Wake-on-LAN for BCM54210E/B50212E
- report LPI counter
- Microsemi PHYs: support RGMII delay configuration (VSC85xx)
- Micrel PHYs: receive timestamp in the frame (LAN8841)
- Realtek PHYs: support optional external PHY clock
- Altera TSE PCS: merge the driver into Lynx PCS which it is a
variant of
- CAN: Kvaser PCIEcan:
- support packet timestamping
- WiFi:
- Intel (iwlwifi):
- major update for new firmware and Multi-Link Operation (MLO)
- configuration rework to drop test devices and split the
different families
- support for segmented PNVM images and power tables
- new vendor entries for PPAG (platform antenna gain) feature
- Qualcomm 802.11ax (ath11k):
- Multiple Basic Service Set Identifier (MBSSID) and Enhanced
MBSSID Advertisement (EMA) support in AP mode
- support factory test mode
- RealTek (rtw89):
- add RSSI based antenna diversity
- support U-NII-4 channels on 5 GHz band
- RealTek (rtl8xxxu):
- AP mode support for 8188f
- support USB RX aggregation for the newer chips"
* tag 'net-next-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1602 commits)
net: scm: introduce and use scm_recv_unix helper
af_unix: Skip SCM_PIDFD if scm->pid is NULL.
net: lan743x: Simplify comparison
netlink: Add __sock_i_ino() for __netlink_diag_dump().
net: dsa: avoid suspicious RCU usage for synced VLAN-aware MAC addresses
Revert "af_unix: Call scm_recv() only after scm_set_cred()."
phylink: ReST-ify the phylink_pcs_neg_mode() kdoc
libceph: Partially revert changes to support MSG_SPLICE_PAGES
net: phy: mscc: fix packet loss due to RGMII delays
net: mana: use vmalloc_array and vcalloc
net: enetc: use vmalloc_array and vcalloc
ionic: use vmalloc_array and vcalloc
pds_core: use vmalloc_array and vcalloc
gve: use vmalloc_array and vcalloc
octeon_ep: use vmalloc_array and vcalloc
net: usb: qmi_wwan: add u-blox 0x1312 composition
perf trace: fix MSG_SPLICE_PAGES build error
ipvlan: Fix return value of ipvlan_queue_xmit()
netfilter: nf_tables: fix underflow in chain reference counter
netfilter: nf_tables: unbind non-anonymous set if rule construction fails
...
Some servers may return error codes from REQ_GET_DFS_REFERRAL requests
that are unexpected by the client, so to make it easier, assume
non-DFS mounts when the client can't get the initial DFS referral of
@ctx->UNC in dfs_mount_share().
Signed-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
When having two DFS root mounts that are connected to same namespace,
same mount options but different prefix paths, we can't really use the
shared @server->origin_fullpath when chasing DFS links in them.
Move the origin_fullpath field to cifs_tcon structure so when having
shared DFS root mounts with different prefix paths, and we need to
chase any DFS links, dfs_get_automount_devname() will pick up the
correct full path out of the @tcon that will be used for the new
mount.
Before patch
mount.cifs //dom/dfs/dir /mnt/1 -o ...
mount.cifs //dom/dfs /mnt/2 -o ...
# shared server, ses, tcon
# server: origin_fullpath=//dom/dfs/dir
# @server->origin_fullpath + '/dir/link1'
$ ls /mnt/2/dir/link1
ls: cannot open directory '/mnt/2/dir/link1': No such file or directory
After patch
mount.cifs //dom/dfs/dir /mnt/1 -o ...
mount.cifs //dom/dfs /mnt/2 -o ...
# shared server & ses
# tcon_1: origin_fullpath=//dom/dfs/dir
# tcon_2: origin_fullpath=//dom/dfs
# @tcon_2->origin_fullpath + '/dir/link1'
$ ls /mnt/2/dir/link1
dir0 dir1 dir10 dir3 dir5 dir6 dir7 dir9 target2_file.txt tsub
Fixes: 8e3554150d ("cifs: fix sharing of DFS connections")
Signed-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Handle trailing and leading separators when parsing UNC and prefix
paths in smb3_parse_devname(). Then, store the sanitised paths in
smb3_fs_context::source.
This fixes the following cases
$ mount //srv/share// /mnt/1 -o ...
$ cat /mnt/1/d0/f0
cat: /mnt/1/d0/f0: Invalid argument
The -EINVAL was returned because the client sent SMB2_CREATE "\\d0\f0"
rather than SMB2_CREATE "\d0\f0".
$ mount //srv//share /mnt/1 -o ...
mount: Invalid argument
The -EINVAL was returned correctly although the client only realised
it after sending a couple of bad requests rather than bailing out
earlier when parsing mount options.
Signed-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Cc: stable@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
Having the ClientGUID info makes it easier to debug
issues related to a client on a server that serves a
number of clients.
This change prints the ClientGUID in DebugData.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Acked-by: Tom Talpey <tom@talpey.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Chech the session state and skip it if it's exiting.
Signed-off-by: Winston Wen <wentao@uniontech.com>
Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>
Cc: stable@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
Don't collect exiting session in smb2_reconnect_server(), because it
will be released soon.
Note that the exiting session will stay in server->smb_ses_list until
it complete the cifs_free_ipc() and logoff() and then delete itself
from the list.
Signed-off-by: Winston Wen <wentao@uniontech.com>
Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
All the server credits and in-flight info is protected by req_lock.
Once the req_lock is held, and we've determined that we have enough
credits to continue, this lock cannot be dropped till we've made the
changes to credits and in-flight count.
However, we used to drop the lock in order to avoid deadlock with
the recent srv_lock. This could cause the checks already made to be
invalidated.
Fixed it by moving the server status check to before locking req_lock.
Fixes: d7d7a66aac ("cifs: avoid use of global locks for high contention data")
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
In smb2_compound_op we have a possible use-after-free
which can cause hard to debug problems later on.
This was revealed during stress testing with KASAN enabled
kernel. Fixing it by moving the cfile free call to
a few lines below, after the usage.
Fixes: 76894f3e2f ("cifs: improve symlink handling for smb2+")
Reviewed-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
-----BEGIN PGP SIGNATURE-----
iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAmSV8QgQHGF4Ym9lQGtl
cm5lbC5kawAKCRD301j7KXHgpupIEADKEZvpxDyaxHjYZFFeoSJRkh+AEJHe0Xtr
J5vUL8t8zmAV3F7i8XaoAEcR0dC0VQcoTc8fAOty71+5hsc7gvtyyNjqU/YWRVqK
Xr+VJuSJ+OGx3MzpRWEkepagfPyqP5cyyCOK6gqIgqzc3IwqkR/3QHVRc6oR8YbY
AQd7tqm2fQXK9WDHEy5hcaQeqb9uKZjQQoZejpPPerpJM+9RMgKxpCGtnLLIUhr/
sgl7KyLIQPBmveO2vfOR+dmsJBqsLqneqkXDKMAIfpeVEEkHHAlCH4E5Ne1XUS+s
ie4If+reuyn1Ktt5Ry1t7w2wr8cX1fcay3K28tgwjE2Bvremc5YnYgb3pyUDW38f
tXXkpg/eTXd/Pn0Crpagoa9zJ927tt5JXIO1/PagPEP1XOqUuthshDFsrVqfqbs+
36gqX2JWB4NJTg9B9KBHA3+iVCJyZLjUqOqws7hOJOvhQytZVm/IwkGBg1Slhe1a
J5WemBlqX8lTgXz0nM7cOhPYTZeKe6hazCcb5VwxTUTj9SGyYtsMfqqTwRJO9kiF
j1VzbOAgExDYe+GvfqOFPh9VqZho66+DyOD/Xtca4eH7oYyHSmP66o8nhRyPBPZA
maBxQhUkPQn4/V/0fL2TwIdWYKsbj8bUyINKPZ2L35YfeICiaYIctTwNJxtRmItB
M3VxWD3GZQ==
=KhW4
-----END PGP SIGNATURE-----
Merge tag 'for-6.5/splice-2023-06-23' of git://git.kernel.dk/linux
Pull splice updates from Jens Axboe:
"This kills off ITER_PIPE to avoid a race between truncate,
iov_iter_revert() on the pipe and an as-yet incomplete DMA to a bio
with unpinned/unref'ed pages from an O_DIRECT splice read. This causes
memory corruption.
Instead, we either use (a) filemap_splice_read(), which invokes the
buffered file reading code and splices from the pagecache into the
pipe; (b) copy_splice_read(), which bulk-allocates a buffer, reads
into it and then pushes the filled pages into the pipe; or (c) handle
it in filesystem-specific code.
Summary:
- Rename direct_splice_read() to copy_splice_read()
- Simplify the calculations for the number of pages to be reclaimed
in copy_splice_read()
- Turn do_splice_to() into a helper, vfs_splice_read(), so that it
can be used by overlayfs and coda to perform the checks on the
lower fs
- Make vfs_splice_read() jump to copy_splice_read() to handle
direct-I/O and DAX
- Provide shmem with its own splice_read to handle non-existent pages
in the pagecache. We don't want a ->read_folio() as we don't want
to populate holes, but filemap_get_pages() requires it
- Provide overlayfs with its own splice_read to call down to a lower
layer as overlayfs doesn't provide ->read_folio()
- Provide coda with its own splice_read to call down to a lower layer
as coda doesn't provide ->read_folio()
- Direct ->splice_read to copy_splice_read() in tty, procfs, kernfs
and random files as they just copy to the output buffer and don't
splice pages
- Provide wrappers for afs, ceph, ecryptfs, ext4, f2fs, nfs, ntfs3,
ocfs2, orangefs, xfs and zonefs to do locking and/or revalidation
- Make cifs use filemap_splice_read()
- Replace pointers to generic_file_splice_read() with pointers to
filemap_splice_read() as DIO and DAX are handled in the caller;
filesystems can still provide their own alternate ->splice_read()
op
- Remove generic_file_splice_read()
- Remove ITER_PIPE and its paraphernalia as generic_file_splice_read
was the only user"
* tag 'for-6.5/splice-2023-06-23' of git://git.kernel.dk/linux: (31 commits)
splice: kdoc for filemap_splice_read() and copy_splice_read()
iov_iter: Kill ITER_PIPE
splice: Remove generic_file_splice_read()
splice: Use filemap_splice_read() instead of generic_file_splice_read()
cifs: Use filemap_splice_read()
trace: Convert trace/seq to use copy_splice_read()
zonefs: Provide a splice-read wrapper
xfs: Provide a splice-read wrapper
orangefs: Provide a splice-read wrapper
ocfs2: Provide a splice-read wrapper
ntfs3: Provide a splice-read wrapper
nfs: Provide a splice-read wrapper
f2fs: Provide a splice-read wrapper
ext4: Provide a splice-read wrapper
ecryptfs: Provide a splice-read wrapper
ceph: Provide a splice-read wrapper
afs: Provide a splice-read wrapper
9p: Add splice_read wrapper
net: Make sock_splice_read() use copy_splice_read() by default
tty, proc, kernfs, random: Use copy_splice_read()
...
This fixes the following warning reported by kernel test robot
fs/smb/client/connect.c:2974 generic_ip_connect() error: we
previously assumed 'socket' could be null (see line 2962)
Link: https://lore.kernel.org/all/202306170124.CtQqzf0I-lkp@intel.com/
Signed-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
This fixes the following warning reported by kernel test robot
fs/smb/client/cifssmb.c:4216 CIFSFindNext() warn: missing error
code? 'rc'
Link: https://lore.kernel.org/all/202306170124.CtQqzf0I-lkp@intel.com/
Signed-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
This fixes the following warning reported by kernel test robot
fs/smb/client/cifssmb.c:4089 CIFSFindFirst() warn: missing error
code? 'rc'
Link: https://lore.kernel.org/all/202306170124.CtQqzf0I-lkp@intel.com/
Signed-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
There were cases reported where servers will sometimes return more
credits than requested on oplock break responses, which can lead to
most of the credits being allocated for oplock breaks (instead of
for normal operations like read and write) if number of SMB3 requests
in flight always stays above 0 (the oplock and echo credits are
rebalanced when in flight requests goes down to zero).
If oplock credits gets unexpectedly large (e.g. three is more than it
would ever be expected to be) and in flight requests are greater than
zero, then rebalance the oplock credits and regular credits (go
back to reserving just one oplock credit).
Signed-off-by: Steve French <stfrench@microsoft.com>
We had seen cases where cifs_invalidate_mapping was logging:
"Could not invalidate inode ..."
if invalidate_inode_pages2 fails but this message does not show what
the rc is. Update the logged message to also log the return code.
Suggested-by: Shyam Prasad N <sprasad@microsoft.com>
Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
This fixes the following warning reported by kernel test robot
fs/smb/client/cifsfs.c:982 cifs_smb3_do_mount() warn: possible
memory leak of 'cifs_sb'
Link: https://lore.kernel.org/all/202306170124.CtQqzf0I-lkp@intel.com/
Signed-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Fix potential dereference of ERR_PTR @tlink as reported by kernel test
robot
fs/smb/client/connect.c:2775 cifs_match_super() error: 'tlink'
dereferencing possible ERR_PTR()
Link: https://lore.kernel.org/all/202306170124.CtQqzf0I-lkp@intel.com/
Signed-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
We print most other mount options for a mount when dumping
the mount entries. But miss out the nosharesock value.
This change will print that in addition to the other options.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Reviewed-by: Bharath SM <bharathsm@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
In case if all existing file handles are deferred handles and if all of
them gets closed due to handle lease break then we dont need to send
lease break acknowledgment to server, because last handle close will be
considered as lease break ack.
After closing deferred handels, we check for openfile list of inode,
if its empty then we skip sending lease break ack.
Fixes: 59a556aebc ("SMB3: drop reference to cfile before sending oplock break")
Reviewed-by: Tom Talpey <tom@talpey.com>
Signed-off-by: Bharath SM <bharathsm@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
