Extend aquacomputer_d5next driver to expose various hardware sensors of the
Aquacomputer Aquastream XT watercooling pump, which communicates
through a proprietary USB HID protocol. Implemented by Leonard Anderweit
[1] [2].
Coolant temp, fan IC and external temp sensor readings are available, along
with speed and voltage of both the pump and optionally connected fan.
It also exposes pump current.
Additionally, serial number and firmware version are exposed through
debugfs.
[1] https://github.com/aleksamagicka/aquacomputer_d5next-hwmon/pull/46
[2] https://github.com/aleksamagicka/aquacomputer_d5next-hwmon/pull/49
Originally-from: Leonard Anderweit <leonard.anderweit@gmail.com>
Signed-off-by: Aleksa Savic <savicaleksa83@gmail.com>
Link: https://lore.kernel.org/r/20230416181702.9892-1-savicaleksa83@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Add driver for the StarFive JH71x0 temperature sensor. You
can enable/disable it and read temperature in milli Celcius
through sysfs.
Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
Co-developed-by: Samin Guo <samin.guo@starfivetech.com>
Signed-off-by: Samin Guo <samin.guo@starfivetech.com>
Signed-off-by: Hal Feng <hal.feng@starfivetech.com>
Link: https://lore.kernel.org/r/20230321022644.107027-3-hal.feng@starfivetech.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Remove description of deprecated registration functions from the hardware
monitoring kernel API documentation to help ensure that no attempts are
made to use them in new drivers.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The commit 036d6a4e75 ("ABI: sysfs-class-hwmon: add ABI documentation
for it") moved all ABI attributes to the usual ABI documentation. But this
change left a stray colon for the fan speed control method. Fix this
to avoid a confusion of readers.
Fixes: 036d6a4e75 ("ABI: sysfs-class-hwmon: add ABI documentation for it")
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Link: https://lore.kernel.org/r/20230312155714.17290-1-stefan.wahren@i2se.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Add the option to control fan PWM on Aquacomputer Aquaero. The Aquaero is
the most complex Aquacomputer device, control is therefore more complicated
then on already supported devices.
Setting PWM requires multiple steps. First, an internal static PWM
controller is set to the desired PWM value. Second, the fan is set to use
that PWM controller. Last, the minimum and maximum accepted PWM values
of the fan are set to allow all possible PWM values.
Signed-off-by: Leonard Anderweit <leonard.anderweit@gmail.com>
Link: https://lore.kernel.org/r/20230214220221.15003-7-leonard.anderweit@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The Fujitsu OEM Mainboard business was acquired by Kontron,
so the specifications of the Teutates chip was transferred to
the new Kontron FTP server.
Update the specifications website accordingly. The outdated
sensors how-to was omitted.
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20230226014830.10929-1-W_Armin@gmx.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
HWmon core receives an array of pointers to hwmon_channel_info and it
does not modify it, thus it can be array of const pointers for safety.
This allows drivers to make them also const.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
changes include:
- Some significant additions to the memory-management documentation
- Some improvements to navigation in the HTML-rendered docs
- More Spanish and Chinese translations
...and the usual set of typo fixes and such.
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEIw+MvkEiF49krdp9F0NaE2wMflgFAmPzkQUPHGNvcmJldEBs
d24ubmV0AAoJEBdDWhNsDH5YC0QH/09u10xV3N+RuveNE/tArVxKcQi7JZd/xugQ
toSXygh64WY10lzwi7Ms1bHZzpPYB0fOrqTGNqNQuhrVTjQzaZB0BBJqm8lwt2w/
S/Z5wj+IicJTmQ7+0C2Hc/dcK5SCPfY3CgwqOUVdr3dEm1oU+4QaBy31fuIJJ0Hx
NdbXBco8BZqJX9P67jwp9vbrFrSGBjPI0U4HNHVjrWlcBy8JT0aAnf0fyWFy3orA
T86EzmEw8drA1mXsHa5pmVwuHDx2X+D+eRurG9llCBrlIG9EDSmnalY4BeGqR4LS
oDrEH6M91I5+9iWoJ0rBheD8rPclXO2HpjXLApXzTjrORgEYZsM=
=MCdX
-----END PGP SIGNATURE-----
Merge tag 'docs-6.3' of git://git.lwn.net/linux
Pull documentation updates from Jonathan Corbet:
"It has been a moderately calm cycle for documentation; the significant
changes include:
- Some significant additions to the memory-management documentation
- Some improvements to navigation in the HTML-rendered docs
- More Spanish and Chinese translations
... and the usual set of typo fixes and such"
* tag 'docs-6.3' of git://git.lwn.net/linux: (68 commits)
Documentation/watchdog/hpwdt: Fix Format
Documentation/watchdog/hpwdt: Fix Reference
Documentation: core-api: padata: correct spelling
docs/mm: Physical Memory: correct spelling in reference to CONFIG_PAGE_EXTENSION
docs: Use HTML comments for the kernel-toc SPDX line
docs: Add more information to the HTML sidebar
Documentation: KVM: Update AMD memory encryption link
printk: Document that CONFIG_BOOT_PRINTK_DELAY required for boot_delay=
Documentation: userspace-api: correct spelling
Documentation: sparc: correct spelling
Documentation: driver-api: correct spelling
Documentation: admin-guide: correct spelling
docs: add workload-tracing document to admin-guide
docs/admin-guide/mm: remove useless markup
docs/mm: remove useless markup
docs/mm: Physical Memory: remove useless markup
docs/sp_SP: Add process magic-number translation
docs: ftrace: always use canonical ftrace path
Doc/damon: fix the data path error
dma-buf: Add "dma-buf" to title of documentation
...
Even though the hardware monitoring documentation already stated that new
drivers should use [devm_]devm_hwmon_device_register_with_info() to
register with the hardware monitoring subsystem, we still get submissions
for new drivers using the older APIs. There is no benefit to use those
APIs. On the contrary, using the older APIs results in substantially larger
code size. Explicitly deprecate [devm_]hwmon_device_register_with_groups()
to ensure that all new drivers use the latest API.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Extend aquacomputer_d5next driver to expose various hardware sensors of the
Aquacomputer Aquastream Ultimate watercooling pump, which communicates
through a proprietary USB HID protocol.
Coolant temp and external temp sensor readings are available, along with
speed, power, voltage and current of both the pump and optionally connected
fan. It also exposes pressure and flow speed readings.
Additionally, serial number and firmware version are exposed through
debugfs.
Tested by a user on Github [1].
[1] https://github.com/aleksamagicka/aquacomputer_d5next-hwmon/issues/50
Signed-off-by: Aleksa Savic <savicaleksa83@gmail.com>
Link: https://lore.kernel.org/r/20230203120324.579808-1-savicaleksa83@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Extend aquacomputer_d5next driver to expose the temp sensor of the
Aquacomputer Poweradjust 3 fan controller, which communicates
through a proprietary USB HID protocol.
The Poweradjust 3 is not currently known to expose firmware version
and serial number, so don't create debugfs entries if their values
can't be retrieved.
Tested by a user on Github [1].
[1] https://github.com/aleksamagicka/aquacomputer_d5next-hwmon/issues/57
Signed-off-by: Aleksa Savic <savicaleksa83@gmail.com>
Link: https://lore.kernel.org/r/20230131101210.8095-1-savicaleksa83@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Updated the driver documentation to list all current chips and
describe the module parameters as per descriptions in the code.
Signed-off-by: Frank Crawford <frank@crawford.emu.id.au>
Link: https://lore.kernel.org/r/20230128060308.1549707-8-frank@crawford.emu.id.au
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
From programming perspective, MAX16600 is identical to MAX16601 and
MAX16602. Add support for it.
Cc: Steve Foreman <foremans@google.com>
Cc: Holly Barrett <holly.barrett@analog.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Replace the nonstandard fanX_source attributes with the standardized
pwmX_auto_channels_temp attributes and document the special behaviour
associated with those attributes.
Tested on a Fujitsu DS3401-B1.
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20230105225107.58308-3-W_Armin@gmx.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The GXP SoC can support up to 16 fans through the interface provided by
the CPLD. The current support is limited to 8 fans. The fans speeds are
controlled via 8 different PWMs which can vary in value from 0-255. The
fans are also capable of reporting if they have failed to the CPLD which
in turn reports the status to the GXP SoC.
Signed-off-by: Nick Hawkins <nick.hawkins@hpe.com>
Link: https://lore.kernel.org/r/20230103203654.59322-2-nick.hawkins@hpe.com
[groeck: Improved alignment of defined, added missing include linux/bits.h]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Add support for reading four calculated virtual temp sensors on the
Aquacomputer Aquaero. Values of these sensors are calculated on the
device itself based on what the user configured in the official software.
Configuring these sensors is not currently reverse engineered.
Signed-off-by: Aleksa Savic <savicaleksa83@gmail.com>
Link: https://lore.kernel.org/r/20230101190056.1357124-1-savicaleksa83@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Add support for the AYANEO AIR and AYANEO AIR Pro models of handheld
devices. These devices use the same EC registers and logic as the One X
Player mini AMD. Previous AYANEO models are not supported as they use a
different EC and do not have the necessary fan speed write enable and
setting registers. The driver is tested on AYANEO AIR while AIR Pro model
EC functionality and DMI data were verified using command line tools by
another user.
Add:
- AYANEO AIR (AMD 5560U)
- AYANEO AIR Pro (AMD 5560U)
- AYANEO AIR Pro (AMD 5825U)
While at it, fix spelling error (appart -> apart).
Link: https://lore.kernel.org/r/20221229025609.147482-1-derekjohn.clark@gmail.com
Signed-off-by: Derek J. Clark <derekjohn.clark@gmail.com>
[groeck: Sanitize commit description]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Some documents that listed on subsystem-apis have 'Linux' or 'The Linux'
title prefixes. It's duplicated information, and makes finding the
document of interest with human eyes not easy. Remove the prefixes from
the titles.
Signed-off-by: SeongJae Park <sj@kernel.org>
Acked-by: Iwona Winiarska <iwona.winiarska@intel.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://lore.kernel.org/r/20230122184834.181977-1-sj@kernel.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
A user complained that the ftsteutates driver was displaying
bogus values since its introduction. This happens because the
sensor measurements need to be scaled in order to produce
meaningful results:
- the fan speed needs to be multiplied by 60 since its in RPS
- the temperature is in degrees celsius and needs an offset of 64
- the voltage is in 1/256 of 3.3V
The offical datasheet says the voltage needs to be divided by 256,
but this is likely an off-by-one-error, since even the BIOS
devides by 255 (otherwise 3.3V could not be measured).
The voltage channels additionally need a board-specific multiplier,
however this can be done by the driver since its board-specific.
The reason the missing scaling of measurements is the way Fujitsu
used this driver when it was still out-of-tree. Back then, all
scaling was done in userspace by libsensors, even the generic one.
Tested on a Fujitsu DS3401-B1.
Fixes: 08426eda58 ("hwmon: Add driver for FTS BMC chip "Teutates"")
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20221224041855.83981-2-W_Armin@gmx.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Add support for the AOK ZOE A1 and OXP Mini PRO handheld devices.
DMI strings are added to this driver since the same EC layout is used and
has similar specs as the OXP mini AMD.
The added devices are:
- OneXPlayer mini PRO (AMD 6800U)
- AOK ZOE A1 (AMD 6800U)
Signed-off-by: Joaquín Ignacio Aramendía <samsagax@gmail.com>
Link: https://lore.kernel.org/r/20221125114901.11309-1-samsagax@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Sensors driver for OXP Handhelds from One-Netbook that expose fan reading
and control via hwmon sysfs.
As far as I could gather all OXP boards have the same DMI strings and
they can be told appart only by the boot cpu vendor (Intel/AMD).
Currently only AMD boards are supported since Intel have different EC
registers and values to read/write.
Fan control is provided via pwm interface in the range [0-255]. AMD
boards have [0-100] as range in the EC, the written value is scaled to
accommodate for that.
Signed-off-by: Joaquín Ignacio Aramendía <samsagax@gmail.com>
Link: https://lore.kernel.org/r/20221104140659.593608-1-samsagax@gmail.com
[groeck: Removed misleading comment about module_platform_driver()]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
This adds the enable attribute which is used to select if zero PWM duty
means to switch off regulator and PWM or to keep them enabled but
at inactive PWM output level.
Depending on the select enable mode, turn off the regulator and PWM if
the PWM duty is zero, or keep them enabled.
This is especially important for fan using inverted PWM signal polarity.
Having regulator supplied and PWM disabled, some PWM controllers provide
the active, rather than inactive signal.
With this change the shutdown as well as suspend/resume paths require
modifcations as well.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Link: https://lore.kernel.org/r/20220914153137.613982-6-alexander.stein@ew.tq-group.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Add the pmbus driver for TEXAS tps546d24 Buck Converter.
The vout mode of tps546d24 supported relative data format,
which is not supported by the PMBus core.
Signed-off-by: Duke Du <dukedu83@gmail.com>
Link: https://lore.kernel.org/r/1662951668-9849-1-git-send-email-Duke.Du@quantatw.com
[groeck: Add __maybe_unused to tps546d24_of_match declaration]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Extend aquacomputer_d5next driver to expose various hardware
sensors of the Aquacomputer High Flow Next flow sensor, which
communicates through a proprietary USB HID protocol.
The High Flow Next exposes +5V voltages, water quality, conductivity
and flow readings. A temperature sensor can be connected to it, in
which case it provides its reading and an estimation of the
dissipated/absorbed power in the liquid cooling loop.
Additionally, serial number and firmware version are exposed through
debugfs.
Registry offsets were discovered and tested by users on Github [1] [2].
[1] https://github.com/aleksamagicka/aquacomputer_d5next-hwmon/issues/8
[2] https://github.com/aleksamagicka/aquacomputer_d5next-hwmon/pull/34
Signed-off-by: Aleksa Savic <savicaleksa83@gmail.com>
Link: https://lore.kernel.org/r/20220907100739.806571-1-savicaleksa83@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The MAX31790 has a tach input enable bit in each fan's configuration
register. This is only enabled by the driver if RPM mode is selected,
but the driver doesn't provide a way to independently enable tachometer
input regardless of the regulator mode.
By adding the fanN_enable sysfs files, we can decouple the tach input
from the regulator mode. Also update the documentation.
Signed-off-by: Justin Ledford <justinledford@google.com>
Link: https://lore.kernel.org/r/20220829195930.2521755-1-justinledford@google.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Add reporting if the PSU is running in single or multi rail mode via
ocpmode debugfs entry. Also update the documentation and driver comments
accordingly.
Signed-off-by: Wilken Gottwalt <wilken.gottwalt@posteo.net>
Link: https://lore.kernel.org/r/YvS9PZKr0xqFqJny@monster.localdomain
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Add support for reading virtual temperature sensors for the D5 Next, Octo,
Quadro and Farbwerk 360.
Virtual temperature sensors are written to the device by the user, pulling
from an arbitrary value source. Writing to them is not yet reverse
engineered, so the only way to set them for now is to use the official
software.
Signed-off-by: Aleksa Savic <savicaleksa83@gmail.com>
Link: https://lore.kernel.org/r/20220817121441.112198-1-savicaleksa83@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
This driver utilises a WMI interface found in AMD 500 series ASUS boards,
to read EC registers. But it turned out that ASUS abandoned the
interface, as it disappeared from Intel 600 series boards. Additionally,
the WMI interface was incredibly slow. Therefore this driver was deprecated
in favor of the asus_ec_sensors driver, which supports more boards, more
sensors, and is faster.
Signed-off-by: Eugene Shalygin <eugene.shalygin@gmail.com>
Link: https://lore.kernel.org/r/20220720072016.102086-2-eugene.shalygin@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
earth-shaking:
- More Chinese translations, and an update to the Italian translations.
The Japanese, Korean, and traditional Chinese translations are
more-or-less unmaintained at this point, instead.
- Some build-system performance improvements.
- The removal of the archaic submitting-drivers.rst document, with the
movement of what useful material that remained into other docs.
- Improvements to sphinx-pre-install to, hopefully, give more useful
suggestions.
- A number of build-warning fixes
Plus the usual collection of typo fixes, updates, and more.
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEIw+MvkEiF49krdp9F0NaE2wMflgFAmLn9OwPHGNvcmJldEBs
d24ubmV0AAoJEBdDWhNsDH5YtrwIAJNZoDYJJIRuVHnFkAn5EJ4b/chnR1dSTBtn
WdE/1zdAlMBWVlEGO48VZybph9Sk0v+cUGf+yviDgASQrfOhRRTkg/0u6XaBAYO0
+C2D1QDd9DggGgajxsfJfTdD3IuB78mGmCQvP17XIJW+NK1CK9rXZBnj6WC5/HJw
PCHzeeVreBxOS3W9GelMYa6vjVl7dv81x4DPllnsgU2AMk0/Ce0MVjeIZ695sOeP
Ki6jZgC2GsgFSK5kBC35OiDe5q+fDzlLfek34EUCn4SIbMALSUYWO1db122w5Pme
Ej0+UTBhD19WH1uB/rcVKnVWugi7UEUJexZsao+nC7UrdIVtYq0=
=83BG
-----END PGP SIGNATURE-----
Merge tag 'docs-6.0' of git://git.lwn.net/linux
Pull documentation updates from Jonathan Corbet:
"This was a moderately busy cycle for documentation, but nothing
all that earth-shaking:
- More Chinese translations, and an update to the Italian
translations.
The Japanese, Korean, and traditional Chinese translations
are more-or-less unmaintained at this point, instead.
- Some build-system performance improvements.
- The removal of the archaic submitting-drivers.rst document,
with the movement of what useful material that remained into
other docs.
- Improvements to sphinx-pre-install to, hopefully, give more
useful suggestions.
- A number of build-warning fixes
Plus the usual collection of typo fixes, updates, and more"
* tag 'docs-6.0' of git://git.lwn.net/linux: (92 commits)
docs: efi-stub: Fix paths for x86 / arm stubs
Docs/zh_CN: Update the translation of sched-stats to 5.19-rc8
Docs/zh_CN: Update the translation of pci to 5.19-rc8
Docs/zh_CN: Update the translation of pci-iov-howto to 5.19-rc8
Docs/zh_CN: Update the translation of usage to 5.19-rc8
Docs/zh_CN: Update the translation of testing-overview to 5.19-rc8
Docs/zh_CN: Update the translation of sparse to 5.19-rc8
Docs/zh_CN: Update the translation of kasan to 5.19-rc8
Docs/zh_CN: Update the translation of iio_configfs to 5.19-rc8
doc:it_IT: align Italian documentation
docs: Remove spurious tag from admin-guide/mm/overcommit-accounting.rst
Documentation: process: Update email client instructions for Thunderbird
docs: ABI: correct QEMU fw_cfg spec path
doc/zh_CN: remove submitting-driver reference from docs
docs: zh_TW: align to submitting-drivers removal
docs: zh_CN: align to submitting-drivers removal
docs: ko_KR: howto: remove reference to removed submitting-drivers
docs: ja_JP: howto: remove reference to removed submitting-drivers
docs: it_IT: align to submitting-drivers removal
docs: process: remove outdated submitting-drivers.rst
...
Extend aquacomputer_d5next driver to expose hardware temperature sensors
and fans of the Aquacomputer Quadro fan controller, which communicates
through a proprietary USB HID protocol. Implemented by Jack Doan [1].
Four temperature sensors and PWM controllable fans are available. The
liquid flow sensor is also exposed, implemented by Leonard Anderweit [2].
Additionally, serial number, firmware version and power-on count are
exposed through debugfs.
This driver has been tested on x86_64.
[1] https://github.com/aleksamagicka/aquacomputer_d5next-hwmon/pull/5
[2] https://github.com/aleksamagicka/aquacomputer_d5next-hwmon/pull/9
Originally-from: Jack Doan <me@jackdoan.com>
Originally-from: Leonard Anderweit <leonard.anderweit@gmail.com>
Signed-off-by: Aleksa Savic <savicaleksa83@gmail.com>
Link: https://lore.kernel.org/r/20220727100606.9328-1-savicaleksa83@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Notify users of this driver that each pwmX
attribute controls fan number X, meaning that
probing of pwm channels is unnecessary.
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20220727083004.5684-1-W_Armin@gmx.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Commit 31b24bee33 ("docs: add a warning to submitting-drivers.rst")
in October 2016 already warns "This (...) should maybe just be deleted,
but I'm not quite ready to do that yet".
Maybe, six years ago, we were not ready but let us remove old content
for the better now and structure and maintain less content in the kernel
documentation with a better result.
Drop this already outdated document and adjust all textual references.
Here is an argument why deleting the content will not remove any useful
information to the existing kernel documentation, individually broken down
for each section.
Section "Allocating Device Numbers" refers to https://www.lanana.org/, and
then refers to Documentation/admin-guide/devices.rst.
However, the devices.rst clearly states:
"The version of this document at lanana.org is no longer maintained."
Everything needed for submitting drivers is already stated in devices.rst
and the reference to https://www.lanana.org/ is outdated, and should be
just deleted.
Section "Who To Submit Drivers To" is all about Linux 2.0 - 2.6, before
the new release version scheme; the mentioned developers are still around,
but actually not the first developers to contact anymore.
Section "What Criteria Determine Acceptance" has a few bullet points:
Licensing and Copyright is well-covered in process/kernel-license.rst.
Interfaces, Code, Portability, Clarity state some obvious things about
ensuring kernel code quality.
Control suggests to add a MAINTAINERS entry, which is already mentioned in
6.Followthrough.rst: "... added yourself to the MAINTAINERS file..."
PM support states a bit about implementing and testing power management of
a driver, it remains an open question where to place that in the process
documents. Driver developers interested in power management will find the
corresponding part on power management in the kernel documentation anyway.
In section "What Criteria Do Not Determine Acceptance", the points Vendor
and Author states something basic consequence of the kernel being an
open-source community software development. Probably no need to mention it
nowadays.
Section "Resources" lists resources that are also mentioned elsewhere more
central.
- Linux kernel tree and mailing list is mentioned in many places.
- https://lwn.net/Kernel/LDD3/ is mentioned in
Documentation/process/kernel-docs.rst.
- https://lwn.net/ is mentioned in:
- Documentation/process/8.Conclusion.rst
- Documentation/process/kernel-docs.rst
- https://kernelnewbies.org/ is mentioned in:
- Documentation/process/8.Conclusion.rst
- Documentation/process/kernel-docs.rst
- http://www.linux-usb.org/ is mentioned in
Documentation/driver-api/usb/usb.rst
- https://landley.net/kdocs/ols/2002/ols2002-pages-545-555.pdf
is mentioned in Documentation/process/kernel-docs.rst
- https://kernelnewbies.org/KernelJanitors is mentioned in
Documentation/process/howto.rst
- https://git-scm.com/ is mentioned in
- Documentation/process/2.Process.rst
- Documentation/process/7.AdvancedTopics.rst
- Documentation/process/howto.rst
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Link: https://lore.kernel.org/r/20220704122537.3407-7-lukas.bulwahn@gmail.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
