Commit Graph

11353 Commits

Author SHA1 Message Date
Linus Torvalds
392abeea52 Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/linux-2.6-kgdb
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/linux-2.6-kgdb:
  vt,console,kdb: preserve console_blanked while in kdb
  vt: fix regression warnings from KMS merge
  arm,kgdb: fix GDB_MAX_REGS no longer used
  kgdb: add missing __percpu markup in arch/x86/kernel/kgdb.c
  kdb: fix compile error without CONFIG_KALLSYMS
2010-08-17 18:36:19 -07:00
David Howells
d7627467b7 Make do_execve() take a const filename pointer
Make do_execve() take a const filename pointer so that kernel_execve() compiles
correctly on ARM:

arch/arm/kernel/sys_arm.c:88: warning: passing argument 1 of 'do_execve' discards qualifiers from pointer target type

This also requires the argv and envp arguments to be consted twice, once for
the pointer array and once for the strings the array points to.  This is
because do_execve() passes a pointer to the filename (now const) to
copy_strings_kernel().  A simpler alternative would be to cast the filename
pointer in do_execve() when it's passed to copy_strings_kernel().

do_execve() may not change any of the strings it is passed as part of the argv
or envp lists as they are some of them in .rodata, so marking these strings as
const should be fine.

Further kernel_execve() and sys_execve() need to be changed to match.

This has been test built on x86_64, frv, arm and mips.

Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: Ralf Baechle <ralf@linux-mips.org>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-17 18:07:43 -07:00
Jesse Barnes
23b90cfd7b x86/PCI: only define pci_domain_nr if PCI and PCI_DOMAINS are set
Otherwise we'll duplicate definitions with the pci.h stubs.

Reported-by: Randy Dunlap <randy.dunlap@oracle.com>
Acked-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-08-17 09:29:36 -07:00
Xiao Guangrong
6b5d7a9f6f KVM: PIT: free irq source id in handling error path
Free irq source id if create pit workqueue fail

Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-08-17 12:04:23 +03:00
Namhyung Kim
8c8aefce93 kgdb: add missing __percpu markup in arch/x86/kernel/kgdb.c
breakinfo->pev is a pointer to percpu pointer but was missing __percpu markup.
Add it.

Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
2010-08-16 15:58:30 -05:00
Linus Torvalds
2245ba2a3a Merge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6:
  gcc-4.6: ACPI: fix unused but set variables in ACPI
  ACPI thermal: make procfs I/F depend on CONFIG_ACPI_PROCFS
  ACPI video: make procfs I/F depend on CONFIG_ACPI_PROCFS
  ACPI processor: remove deprecated ACPI procfs I/F
  ACPI power_resource: remove unused procfs I/F
  ACPI: remove deprecated ACPI procfs I/F
  ACPI: introduce drivers/acpi/sysfs.c
  ACPI: introduce module parameter acpi.aml_debug_output
  ACPI: introduce drivers/acpi/debugfs.c
  ACPI, APEI, ERST debug support
  ACPI, APEI, Manage GHES as platform devices
  ACPI, APEI, Rename CPER and GHES severity constants
  ACPI, APEI, Fix a typo of error path of apei_resources_request
  ACPI / ACPICA: Fix reference counting problems with GPE handlers
  ACPI: Add the check of ADR flag in course of finding ACPI handle for PCI device
  ACPI / Sleep: Drop acpi_suspend_finish()
  ACPI / Sleep: Consolidate suspend and hibernation routines
  ACPI / Wakeup: Simplify enabling of wakeup devices
  ACPI / Sleep: Rework enabling wakeup devices
  ACPI / Sleep: Free NVS copy if suspending of devices fails

Fixed up totally buggered "ACPI: fix unused but set variables in ACPI"
patch that doesn't even compile in the merge.

Thanks to Sedat Dilek <sedat.dilek@googlemail.com> for noticing the
breakage before I even pulled.  And a big "Grrr.." at Len for not even
bothering to compile the tree before asking me to pull.
2010-08-15 17:37:07 -07:00
Xiaotian Feng
3185bf8c23 KVM: destroy workqueue on kvm_create_pit() failures
kernel needs to destroy workqueue if kvm_create_pit() fails, otherwise
after pit is freed, the workqueue is leaked.

Signed-off-by: Xiaotian Feng <dfeng@redhat.com>
Cc: Avi Kivity <avi@redhat.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Gleb Natapov <gleb@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Gregory Haskins <ghaskins@novell.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-08-15 14:17:35 +03:00
Xiaotian Feng
f45755b834 KVM: fix poison overwritten caused by using wrong xstate size
fpu.state is allocated from task_xstate_cachep, the size of task_xstate_cachep
is xstate_size. xstate_size is set from cpuid instruction, which is often
smaller than sizeof(struct xsave_struct). kvm is using sizeof(struct xsave_struct)
to fill in/out fpu.state.xsave, as what we allocated for fpu.state is
xstate_size, kernel will write out of memory and caused poison/redzone/padding
overwritten warnings.

Signed-off-by: Xiaotian Feng <dfeng@redhat.com>
Reviewed-by: Sheng Yang <sheng@linux.intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Avi Kivity <avi@redhat.com>
Cc: Robert Richter <robert.richter@amd.com>
Cc: Sheng Yang <sheng@linux.intel.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Gleb Natapov <gleb@redhat.com>
Cc: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-08-15 14:10:15 +03:00
Len Brown
95ee46aa86 Merge branch 'linus' into release
Conflicts:
	drivers/acpi/debug.c

Signed-off-by: Len Brown <len.brown@intel.com>
2010-08-15 01:06:31 -04:00
Sam Ravnborg
8b1bb90701 defconfig reduction
Use the defconfig files generated by "make savedefconfig" for
remaining defconfig files.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2010-08-14 22:26:53 +02:00
Sam Ravnborg
bf56fba670 archs: replace unifdef-y with header-y
unifdef-y and header-y have same semantic, so drop unifdef-y

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2010-08-14 22:26:51 +02:00
Linus Torvalds
c206d44ffd Merge branch 'x86-uv-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'x86-uv-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, UV: Make kdump avoid stack dumps - fix !CONFIG_KEXEC breakage
  x86, UV: Initialize BAU hub map
  x86, UV: Make kdump avoid stack dumps
2010-08-13 18:00:25 -07:00
Linus Torvalds
78b148696d Merge branch 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq
* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq:
  [CPUFREQ] acpi-cpufreq: add missing __percpu markup
2010-08-13 17:59:09 -07:00
David Howells
c788732523 Mark arguments to certain syscalls as being const
Mark arguments to certain system calls as being const where they should be but
aren't.  The list includes:

 (*) The filename arguments of various stat syscalls, execve(), various utimes
     syscalls and some mount syscalls.

 (*) The filename arguments of some syscall helpers relating to the above.

 (*) The buffer argument of various write syscalls.

Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-13 16:53:13 -07:00
Linus Torvalds
4b17cafaa4 Merge branch 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (30 commits)
  perf: Add back list_head data types
  perf ui hist browser: Fixup key bindings
  perf ui browser: Add ui_browser__show counterpart: __hide
  perf annotate: Cycle thru sorted lines with samples
  perf ui: Make SPACE work as PGDN in all browsers
  perf annotate: Sort by hottest lines in the TUI
  perf ui: Complete the breakdown of util/newt.c
  perf ui: Move hists browser to util/ui/browsers/
  perf symbols: Ignore mapping symbols on ARM
  perf ui: Move map browser to util/ui/browsers/
  perf ui: Move annotate browser to util/ui/browsers/
  perf ui: Move ui_progress routines to separate file in util/ui/
  perf ui: Move ui_helpline routines to separate file in util/ui/
  perf ui: Shorten ui_browser member names
  perf, x86: P4 PMU -- update nmi irq statistics and unmask lvt entry properly
  perf ui: Start breaking down newt.c into multiple files
  perf tui: Introduce list_head based generic ui_browser refresh routine
  perf probe: Fix memory leaks in add_perf_probe_events
  perf probe: Fix to copy the type for raw parameters
  perf report: Speed up exit path
  ...
2010-08-13 10:39:30 -07:00
Linus Torvalds
36450e9c95 Merge branch 'x86-uv-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'x86-uv-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, UV: Initialize BAU MMRs only on hubs with cpus
  x86, UV: Modularize BAU send and wait
  x86, UV: BAU broadcast to the local hub
  x86, UV: Correct BAU regular message type
  x86, UV: Remove BAU check for stay-busy
  x86, UV: Correct BAU discovery of hubs and sockets
  x86, UV: Correct BAU software acknowledge
  x86, UV: BAU structure rearranging
  x86, UV: Shorten access to BAU statistics structure
  x86, UV: Disable BAU on network congestion
  x86, UV: BAU tunables into a debugfs file
  x86, UV: Calculate BAU destination timeout
2010-08-13 10:38:37 -07:00
Linus Torvalds
c029b55af7 Merge branch 'x86/urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'x86/urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, asm: Use a lower case name for the end macro in atomic64_386_32.S
  x86, asm: Refactor atomic64_386_32.S to support old binutils and be cleaner
  x86: Document __phys_reloc_hide() usage in __pa_symbol()
  x86, apic: Map the local apic when parsing the MP table.
2010-08-13 10:35:48 -07:00
Linus Torvalds
9605456919 x86: don't send SIGBUS for kernel page faults
It's wrong for several reasons, but the most direct one is that the
fault may be for the stack accesses to set up a previous SIGBUS.  When
we have a kernel exception, the kernel exception handler does all the
fixups, not some user-level signal handler.

Even apart from the nested SIGBUS issue, it's also wrong to give out
kernel fault addresses in the signal handler info block, or to send a
SIGBUS when a system call already returns EFAULT.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-13 09:49:20 -07:00
Namhyung Kim
3f6c4df7e1 [CPUFREQ] acpi-cpufreq: add missing __percpu markup
acpi_perf_data is a percpu pointer but was missing __percpu markup.
Add it.

Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Dave Jones <davej@redhat.com>
2010-08-13 11:11:49 -04:00
Ingo Molnar
f46a680413 Merge branch 'linus' into perf/urgent
Merge reason: Fix upstream breakage introduced by:

 de5d9bf: Move list types from <linux/list.h> to <linux/types.h>.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-08-12 21:39:04 +02:00
Cliff Wickman
1d6225e8cc x86, UV: Make kdump avoid stack dumps - fix !CONFIG_KEXEC breakage
This replaces Version 1 of this patch, which broke the build when
CONFIG_KEXEC and CONFIG_CRASH_DUMP were configured off.  In that case
the storage for the 'in_crash_kexec' flag was never built.

This version defines that flag as 0 if CONFIG_KEXEC is not set.
The patch is tested with all combinations of those two options.

Signed-off-by: Cliff Wickman <cpw@sgi.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
LKML-Reference: <E1OiZcw-0001Hb-2g@eag09.americas.sgi.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2010-08-12 12:23:55 -07:00
Linus Torvalds
4032816dca Merge branch 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq
* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq:
  [CPUFREQ] add missing __percpu markup in pcc-cpufreq.c
2010-08-12 10:07:11 -07:00
Chris Wilson
4936a3b90d x86/hpet: Use the FSEC_PER_SEC constant for femto-second periods
The current computation, introduced with f12a15be63, of FSEC_PER_SEC using
the multiplication of (FSEC_PER_NSEC * NSEC_PER_SEC) is performed only
with 32bit integers on small machines, resulting in an overflow and a
*very* short intervals being programmed.  An interrupt storm follows.

Note that we also have to specify FSEC_PER_SEC as being long long to
overcome the same limitations.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: John Stultz <johnstul@us.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Ingo Molnar <mingo@elte.hu>
Acked-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-12 09:53:39 -07:00
Namhyung Kim
a3da323420 [CPUFREQ] add missing __percpu markup in pcc-cpufreq.c
pcc_cpu_info is a percpu pointer but was missing __percpu markup.
Add it.

Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Dave Jones <davej@redhat.com>
2010-08-12 12:38:06 -04:00
Linus Torvalds
26f0cf9181 Merge branch 'stable/xen-swiotlb-0.8.6' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen
* 'stable/xen-swiotlb-0.8.6' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen:
  x86: Detect whether we should use Xen SWIOTLB.
  pci-swiotlb-xen: Add glue code to setup dma_ops utilizing xen_swiotlb_* functions.
  swiotlb-xen: SWIOTLB library for Xen PV guest with PCI passthrough.
  xen/mmu: inhibit vmap aliases rather than trying to clear them out
  vmap: add flag to allow lazy unmap to be disabled at runtime
  xen: Add xen_create_contiguous_region
  xen: Rename the balloon lock
  xen: Allow unprivileged Xen domains to create iomap pages
  xen: use _PAGE_IOMAP in ioremap to do machine mappings

Fix up trivial conflicts (adding both xen swiotlb and xen pci platform
driver setup close to each other) in drivers/xen/{Kconfig,Makefile} and
include/xen/xen-ops.h
2010-08-12 09:09:41 -07:00
Luca Barbieri
417484d47e x86, asm: Use a lower case name for the end macro in atomic64_386_32.S
Use a lowercase name for the end macro, which somehow fixes a binutils 2.16
problem.

Signed-off-by: Luca Barbieri <luca@luca-barbieri.com>
LKML-Reference: <tip-30246557a06bb20618bed906a06d1e1e0faa8bb4@git.kernel.org>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-08-12 07:04:16 -07:00
Luca Barbieri
30246557a0 x86, asm: Refactor atomic64_386_32.S to support old binutils and be cleaner
The old code didn't work on binutils 2.12 because setting a symbol to
a register apparently requires a fairly recent version.

This commit refactors the code to use the C preprocessor instead, and
in the process makes the whole code a bit easier to understand.

The object code produced is unchanged as expected.

This fixes kernel bugzilla 16506.

Reported-by: Dieter Stussy <kd6lvw+software@kd6lvw.ampr.org>
Signed-off-by: Luca Barbieri <luca@luca-barbieri.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Cc: <stable@kernel.org> 2.6.35
LKML-Reference: <tip-*@git.kernel.org>
2010-08-11 21:03:28 -07:00
FUJITA Tomonori
3b9c6c11f5 dma-mapping: remove dma_is_consistent API
Architectures implement dma_is_consistent() in different ways (some
misinterpret the definition of API in DMA-API.txt).  So it hasn't been so
useful for drivers.  We have only one user of the API in tree.  Unlikely
out-of-tree drivers use the API.

Even if we fix dma_is_consistent() in some architectures, it doesn't look
useful at all.  It was invented long ago for some old systems that can't
allocate coherent memory at all.  It's better to export only APIs that are
definitely necessary for drivers.

Let's remove this API.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-11 08:59:21 -07:00
FUJITA Tomonori
4565f0170d dma-mapping: unify dma_get_cache_alignment implementations
dma_get_cache_alignment returns the minimum DMA alignment.  Architectures
defines it as ARCH_DMA_MINALIGN (formally ARCH_KMALLOC_MINALIGN).  So we
can unify dma_get_cache_alignment implementations.

Note that some architectures implement dma_get_cache_alignment wrongly.
dma_get_cache_alignment() should return the minimum DMA alignment.  So
fully-coherent architectures should return 1.  This patch also fixes this
issue.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-11 08:59:21 -07:00
Namhyung Kim
8fd49936a8 x86: Document __phys_reloc_hide() usage in __pa_symbol()
Until all supported versions of gcc recognize
-fno-strict-overflow, we should keep the RELOC_HIDE() magic in
__pa_symbol(). Comment it.

Signed-off-by: Namhyung Kim <namhyung@gmail.com>
LKML-Reference: <1281508661-29507-1-git-send-email-namhyung@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-08-11 08:43:49 +02:00
Linus Torvalds
8cbd84f2dd x86: fix up system call numbering nit
As pointed out by Jiri Slaby: when I resolved the the 32-bit x85 system
call entry tables for prlimit (due to the conflict with fanotify), I
forgot to add the numbering in comments that we do for every fifth entry.

Reported-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-10 15:35:10 -07:00
Linus Torvalds
2f9e825d3e Merge branch 'for-2.6.36' of git://git.kernel.dk/linux-2.6-block
* 'for-2.6.36' of git://git.kernel.dk/linux-2.6-block: (149 commits)
  block: make sure that REQ_* types are seen even with CONFIG_BLOCK=n
  xen-blkfront: fix missing out label
  blkdev: fix blkdev_issue_zeroout return value
  block: update request stacking methods to support discards
  block: fix missing export of blk_types.h
  writeback: fix bad _bh spinlock nesting
  drbd: revert "delay probes", feature is being re-implemented differently
  drbd: Initialize all members of sync_conf to their defaults [Bugz 315]
  drbd: Disable delay probes for the upcomming release
  writeback: cleanup bdi_register
  writeback: add new tracepoints
  writeback: remove unnecessary init_timer call
  writeback: optimize periodic bdi thread wakeups
  writeback: prevent unnecessary bdi threads wakeups
  writeback: move bdi threads exiting logic to the forker thread
  writeback: restructure bdi forker loop a little
  writeback: move last_active to bdi
  writeback: do not remove bdi from bdi_list
  writeback: simplify bdi code a little
  writeback: do not lose wake-ups in bdi threads
  ...

Fixed up pretty trivial conflicts in drivers/block/virtio_blk.c and
drivers/scsi/scsi_error.c as per Jens.
2010-08-10 15:22:42 -07:00
Linus Torvalds
b34d8915c4 Merge branch 'writable_limits' of git://decibel.fi.muni.cz/~xslaby/linux
* 'writable_limits' of git://decibel.fi.muni.cz/~xslaby/linux:
  unistd: add __NR_prlimit64 syscall numbers
  rlimits: implement prlimit64 syscall
  rlimits: switch more rlimit syscalls to do_prlimit
  rlimits: redo do_setrlimit to more generic do_prlimit
  rlimits: add rlimit64 structure
  rlimits: do security check under task_lock
  rlimits: allow setrlimit to non-current tasks
  rlimits: split sys_setrlimit
  rlimits: selinux, do rlimits changes under task_lock
  rlimits: make sure ->rlim_max never grows in sys_setrlimit
  rlimits: add task_struct to update_rlimit_cpu
  rlimits: security, add task_struct to setrlimit

Fix up various system call number conflicts.  We not only added fanotify
system calls in the meantime, but asm-generic/unistd.h added a wait4
along with a range of reserved per-architecture system calls.
2010-08-10 12:07:51 -07:00
Linus Torvalds
8c8946f509 Merge branch 'for-linus' of git://git.infradead.org/users/eparis/notify
* 'for-linus' of git://git.infradead.org/users/eparis/notify: (132 commits)
  fanotify: use both marks when possible
  fsnotify: pass both the vfsmount mark and inode mark
  fsnotify: walk the inode and vfsmount lists simultaneously
  fsnotify: rework ignored mark flushing
  fsnotify: remove global fsnotify groups lists
  fsnotify: remove group->mask
  fsnotify: remove the global masks
  fsnotify: cleanup should_send_event
  fanotify: use the mark in handler functions
  audit: use the mark in handler functions
  dnotify: use the mark in handler functions
  inotify: use the mark in handler functions
  fsnotify: send fsnotify_mark to groups in event handling functions
  fsnotify: Exchange list heads instead of moving elements
  fsnotify: srcu to protect read side of inode and vfsmount locks
  fsnotify: use an explicit flag to indicate fsnotify_destroy_mark has been called
  fsnotify: use _rcu functions for mark list traversal
  fsnotify: place marks on object in order of group memory address
  vfs/fsnotify: fsnotify_close can delay the final work in fput
  fsnotify: store struct file not struct path
  ...

Fix up trivial delete/modify conflict in fs/notify/inotify/inotify.c.
2010-08-10 11:39:13 -07:00
Suresh Siddha
d7a7c57393 x86, ia64, smp: use workqueues unconditionally during do_boot_cpu()
Workqueues are now initialized as part of the early_initcall().  So they
are available for use during cold boot process aswell.

Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tejun Heo <tj@kernel.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Tony Luck <tony.luck@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-09 20:45:06 -07:00
Andi Kleen
4e60c86bd9 gcc-4.6: mm: fix unused but set warnings
No real bugs, just some dead code and some fixups.

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-09 20:44:58 -07:00
Cesar Eduardo Barros
597781f3e5 kmap_atomic: make kunmap_atomic() harder to misuse
kunmap_atomic() is currently at level -4 on Rusty's "Hard To Misuse"
list[1] ("Follow common convention and you'll get it wrong"), except in
some architectures when CONFIG_DEBUG_HIGHMEM is set[2][3].

kunmap() takes a pointer to a struct page; kunmap_atomic(), however, takes
takes a pointer to within the page itself.  This seems to once in a while
trip people up (the convention they are following is the one from
kunmap()).

Make it much harder to misuse, by moving it to level 9 on Rusty's list[4]
("The compiler/linker won't let you get it wrong").  This is done by
refusing to build if the type of its first argument is a pointer to a
struct page.

The real kunmap_atomic() is renamed to kunmap_atomic_notypecheck()
(which is what you would call in case for some strange reason calling it
with a pointer to a struct page is not incorrect in your code).

The previous version of this patch was compile tested on x86-64.

[1] http://ozlabs.org/~rusty/index.cgi/tech/2008-04-01.html
[2] In these cases, it is at level 5, "Do it right or it will always
    break at runtime."
[3] At least mips and powerpc look very similar, and sparc also seems to
    share a common ancestor with both; there seems to be quite some
    degree of copy-and-paste coding here. The include/asm/highmem.h file
    for these three archs mention x86 CPUs at its top.
[4] http://ozlabs.org/~rusty/index.cgi/tech/2008-03-30.html
[5] As an aside, could someone tell me why mn10300 uses unsigned long as
    the first parameter of kunmap_atomic() instead of void *?

Signed-off-by: Cesar Eduardo Barros <cesarb@cesarb.net>
Cc: Russell King <linux@arm.linux.org.uk> (arch/arm)
Cc: Ralf Baechle <ralf@linux-mips.org> (arch/mips)
Cc: David Howells <dhowells@redhat.com> (arch/frv, arch/mn10300)
Cc: Koichi Yasutake <yasutake.koichi@jp.panasonic.com> (arch/mn10300)
Cc: Kyle McMartin <kyle@mcmartin.ca> (arch/parisc)
Cc: Helge Deller <deller@gmx.de> (arch/parisc)
Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> (arch/parisc)
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> (arch/powerpc)
Cc: Paul Mackerras <paulus@samba.org> (arch/powerpc)
Cc: "David S. Miller" <davem@davemloft.net> (arch/sparc)
Cc: Thomas Gleixner <tglx@linutronix.de> (arch/x86)
Cc: Ingo Molnar <mingo@redhat.com> (arch/x86)
Cc: "H. Peter Anvin" <hpa@zytor.com> (arch/x86)
Cc: Arnd Bergmann <arnd@arndb.de> (include/asm-generic)
Cc: Rusty Russell <rusty@rustcorp.com.au> ("Hard To Misuse" list)
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-09 20:44:54 -07:00
Cyrill Gorcunov
1c250d709f perf, x86: P4 PMU -- update nmi irq statistics and unmask lvt entry properly
In case if last active performance counter is not overflowed at
moment of NMI being triggered by another counter, the irq
statistics may miss an update stage. As a more serious
consequence -- apic quirk may not be triggered so apic lvt entry
stay masked.

Tested-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <20100805150917.GA6311@lenovo>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-08-08 22:53:50 +02:00
Huang Ying
ad4ecef2f1 ACPI, APEI, Rename CPER and GHES severity constants
The abbreviation of severity should be SEV instead of SER, so the CPER
severity constants are renamed accordingly. GHES severity constants
are renamed in the same way too.

Signed-off-by: Huang Ying <ying.huang@intel.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2010-08-08 14:55:26 -04:00
Linus Torvalds
3b7433b8a8 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq: (55 commits)
  workqueue: mark init_workqueues() as early_initcall()
  workqueue: explain for_each_*cwq_cpu() iterators
  fscache: fix build on !CONFIG_SYSCTL
  slow-work: kill it
  gfs2: use workqueue instead of slow-work
  drm: use workqueue instead of slow-work
  cifs: use workqueue instead of slow-work
  fscache: drop references to slow-work
  fscache: convert operation to use workqueue instead of slow-work
  fscache: convert object to use workqueue instead of slow-work
  workqueue: fix how cpu number is stored in work->data
  workqueue: fix mayday_mask handling on UP
  workqueue: fix build problem on !CONFIG_SMP
  workqueue: fix locking in retry path of maybe_create_worker()
  async: use workqueue for worker pool
  workqueue: remove WQ_SINGLE_CPU and use WQ_UNBOUND instead
  workqueue: implement unbound workqueue
  workqueue: prepare for WQ_UNBOUND implementation
  libata: take advantage of cmwq and remove concurrency limitations
  workqueue: fix worker management invocation without pending works
  ...

Fixed up conflicts in fs/cifs/* as per Tejun. Other trivial conflicts in
include/linux/workqueue.h, kernel/trace/Kconfig and kernel/workqueue.c
2010-08-07 12:42:58 -07:00
FUJITA Tomonori
7e005f7979 remove needless ISA_DMA_THRESHOLD
Architectures don't need to define ISA_DMA_THRESHOLD anymore.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Acked-by: James Bottomley <James.Bottomley@suse.de>
Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-08-07 18:15:50 +02:00
Linus Torvalds
4a386c3e17 Merge branch 'x86-xsave-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'x86-xsave-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, xsave: Make xstate_enable_boot_cpu() __init, protect on CPU 0
  x86, xsave: Add __init attribute to setup_xstate_features()
  x86, xsave: Make init_xstate_buf static
  x86, xsave: Check cpuid level for XSTATE_CPUID (0x0d)
  x86, xsave: Introduce xstate enable functions
  x86, xsave: Separate fpu and xsave initialization
  x86, xsave: Move boot cpu initialization to xsave_init()
  x86, xsave: 32/64 bit boot cpu check unification in initialization
  x86, xsave: Do not include asm/i387.h in asm/xsave.h
  x86, xsave: Use xsaveopt in context-switch path when supported
  x86, xsave: Sync xsave memory layout with its header for user handling
  x86, xsave: Track the offset, size of state in the xsave layout
2010-08-06 16:25:13 -07:00
Linus Torvalds
e8779776af Merge branch 'x86-mce-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'x86-mce-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, mce: Use HW_ERR in MCE handler
  x86, mce: Add HW_ERR printk prefix for hardware error logging
  x86, mce: Fix MSR_IA32_MCI_CTL2 CMCI threshold setup
  x86, mce: Rename MSR_IA32_MCx_CTL2 value
2010-08-06 16:24:51 -07:00
Linus Torvalds
3cf8ad3394 Merge branch 'x86-olpc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'x86-olpc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, olpc: Constify an olpc_ofw() arg
  x86, olpc: Use pr_debug() for EC commands
  x86, olpc: Add comment about implicit optimization barrier
  x86, olpc: Add support for calling into OpenFirmware
2010-08-06 16:24:34 -07:00
Linus Torvalds
66cd55d2b9 Merge branch 'x86-alternatives-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'x86-alternatives-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, alternatives: BUG on encountering an invalid CPU feature number
  x86, alternatives: Fix one more open-coded 8-bit alternative number
  x86, alternatives: Use 16-bit numbers for cpufeature index
2010-08-06 16:24:17 -07:00
Linus Torvalds
75cb5fdce2 Merge branches 'x86-cleanups-for-linus', 'x86-vmware-for-linus', 'x86-mtrr-for-linus', 'x86-apic-for-linus', 'x86-fpu-for-linus' and 'x86-vdso-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'x86-cleanups-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86: Clean up arch/x86/kernel/cpu/mtrr/cleanup.c: use ";" not "," to terminate statements

* 'x86-vmware-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, vmware: Preset lpj values when on VMware.

* 'x86-mtrr-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, mtrr: Use stop machine context to rendezvous all the cpu's

* 'x86-apic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86/apic/es7000_32: Remove unused variable

* 'x86-fpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86: Avoid unnecessary __clear_user() and xrstor in signal handling

* 'x86-vdso-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, vdso: Unmap vdso pages
2010-08-06 16:22:59 -07:00
Linus Torvalds
b62ad9ab18 Merge branch 'timers-timekeeping-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'timers-timekeeping-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  um: Fix read_persistent_clock fallout
  kgdb: Do not access xtime directly
  powerpc: Clean up obsolete code relating to decrementer and timebase
  powerpc: Rework VDSO gettimeofday to prevent time going backwards
  clocksource: Add __clocksource_updatefreq_hz/khz methods
  x86: Convert common clocksources to use clocksource_register_hz/khz
  timekeeping: Make xtime and wall_to_monotonic static
  hrtimer: Cleanup direct access to wall_to_monotonic
  um: Convert to use read_persistent_clock
  timkeeping: Fix update_vsyscall to provide wall_to_monotonic offset
  powerpc: Cleanup xtime usage
  powerpc: Simplify update_vsyscall
  time: Kill off CONFIG_GENERIC_TIME
  time: Implement timespec_add
  x86: Fix vtime/file timestamp inconsistencies

Trivial conflicts in Documentation/feature-removal-schedule.txt

Much less trivial conflicts in arch/powerpc/kernel/time.c resolved as
per Thomas' earlier merge commit 47916be4e2 ("Merge branch
'powerpc.cherry-picks' into timers/clocksource")
2010-08-06 13:18:29 -07:00
H. Peter Anvin
7645e43204 x86, kvm: Remove cast obsoleted by set_64bit() prototype cleanup
KVM ended up having to put a pretty ugly wrapper around set_64bit()
in order to get the type right.  Now set_64bit() takes the expected
u64 type, and this wrapper can be cleaned up.

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Cc: Avi Kivity <avi@redhat.com>
LKML-Reference: <4C5C4E7A.8040603@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-06 13:07:19 -07:00
Linus Torvalds
1cfd2bda8c Merge branch 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6
* 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: (30 commits)
  PCI: update for owner removal from struct device_attribute
  PCI: Fix warnings when CONFIG_DMI unset
  PCI: Do not run NVidia quirks related to MSI with MSI disabled
  x86/PCI: use for_each_pci_dev()
  PCI: use for_each_pci_dev()
  PCI: MSI: Restore read_msi_msg_desc(); add get_cached_msi_msg_desc()
  PCI: export SMBIOS provided firmware instance and label to sysfs
  PCI: Allow read/write access to sysfs I/O port resources
  x86/PCI: use host bridge _CRS info on ASRock ALiveSATA2-GLAN
  PCI: remove unused HAVE_ARCH_PCI_SET_DMA_MAX_SEGMENT_{SIZE|BOUNDARY}
  PCI: disable mmio during bar sizing
  PCI: MSI: Remove unsafe and unnecessary hardware access
  PCI: Default PCIe ASPM control to on and require !EMBEDDED to disable
  PCI: kernel oops on access to pci proc file while hot-removal
  PCI: pci-sysfs: remove casts from void*
  ACPI: Disable ASPM if the platform won't provide _OSC control for PCIe
  PCI hotplug: make sure child bridges are enabled at hotplug time
  PCI hotplug: shpchp: Removed check for hotplug of display devices
  PCI hotplug: pciehp: Fixed return value sign for pciehp_unconfigure_device
  PCI: Don't enable aspm before drivers have had a chance to veto it
  ...
2010-08-06 11:44:36 -07:00
Linus Torvalds
cc41f5cede Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6: (524 commits)
  Staging: wlan-ng: Update prism2_set_tx_power() to use mBm
  Staging: ti-st: update TODO
  Staging: wlags49_h2: use common PCI_VENDOR/DEVICE_ID name format
  Staging: comedi : fix brace coding style issue in wwrap.c
  Staging: quatech_usb2: remove unused qt2_box_flush function
  Staging: slicoss: Remove net_device_stats from the driver's private
  staging: rtl8192su: check whether requests succeeded
  staging: panel: fix error path
  staging: otus: check kmalloc() return value
  staging: octeon: check request_irq() return value
  Staging: wlan-ng: remove typedef in p80211hdr.h
  Staging: wlan-ng: fix checkpatch issues in headers.
  Staging: wlan-ng: remove typedef in p80211ioctl.h
  Staging: wlan-ng: fix style issues in p80211conv.h
  Staging: wlan-ng: fix style issues for p80211hdr.h
  staging: vt6656: removed NTSTATUS definition
  staging: vt6656: simplified tests involving both multi/broad-casts
  Staging: vt6655: replace BOOL with in kernel bool
  Staging: vt6655: replace FALSE with in kernel false
  Staging: vt6655: replace TRUE with in kernel true
  ...
2010-08-06 11:41:17 -07:00
Linus Torvalds
90c8327cad Merge branches 'x86-rwsem-for-linus' and 'x86-gcc46-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'x86-rwsem-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, rwsem: Minor cleanups
  x86, rwsem: Stay on fast path when count > 0 in __up_write()

* 'x86-gcc46-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, gcc-4.6: Fix set but not read variables
  x86, gcc-4.6: Avoid unused by set variables in rdmsr
2010-08-06 10:22:40 -07:00
Linus Torvalds
a417fb99de Merge branch 'x86-setup-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'x86-setup-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, setup: move isdigit.h to ctype.h, header files on top.
  x86, setup: enable early console output from the decompressor
  x86, setup: reorganize the early console setup
  x86, setup: Allow global variables and functions in the decompressor
  x86, setup: Only set early_serial_base after port is initialized
  x86, setup: Make the setup code also accept console=uart8250
  x86, setup: Early-boot serial I/O support
2010-08-06 10:20:47 -07:00
Linus Torvalds
9faa1e5942 Merge branch 'x86-mm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'x86-mm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86: Ioremap: fix wrong physical address handling in PAT code
  x86, tlb: Clean up and correct used type
  x86, iomap: Fix wrong page aligned size calculation in ioremapping code
  x86, mm: Create symbolic index into address_markers array
  x86, ioremap: Fix normal ram range check
  x86, ioremap: Fix incorrect physical address handling in PAE mode
  x86-64, mm: Initialize VDSO earlier on 64 bits
  x86, kmmio/mmiotrace: Fix double free of kmmio_fault_pages
2010-08-06 10:17:52 -07:00
Linus Torvalds
d9a73c0016 Merge branch 'x86-asm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'x86-asm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  um, x86: Cast to (u64 *) inside set_64bit()
  x86-32, asm: Directly access per-cpu GDT
  x86-64, asm: Directly access per-cpu IST
  x86, asm: Merge cmpxchg_486_u64() and cmpxchg8b_emu()
  x86, asm: Move cmpxchg emulation code to arch/x86/lib
  x86, asm: Clean up and simplify <asm/cmpxchg.h>
  x86, asm: Clean up and simplify set_64bit()
  x86: Add memory modify constraints to xchg() and cmpxchg()
  x86-64: Simplify loading initial_gs
  x86: Use symbolic MSR names
  x86: Remove redundant K6 MSRs
2010-08-06 10:07:34 -07:00
Linus Torvalds
b304441c6f Merge branch 'x86-build-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'x86-build-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, vdso: Don't quote $nm in the script for checking vdso references
  x86, vdso: Error out if the vdso contains external references
2010-08-06 10:06:47 -07:00
Linus Torvalds
f7ddc2b6cd Merge branch 'x86-mrst-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'x86-mrst-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, mrst: make mrst_timer_options an enum
  x86, mrst: make mrst_identify_cpu() an inline returning enum
  x86, mrst: add more timer config options
  x86, mrst: add cpu type detection
  x86: detect scattered cpuid features earlier
2010-08-06 10:06:28 -07:00
Linus Torvalds
a5e11599da Merge branch 'x86-hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'x86-hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, hwmon: Package Level Thermal/Power: pkgtemp documentation
  x86, hwmon: Package Level Thermal/Power: power limit
  x86, hwmon: Package Level Thermal/Power: thermal throttling handler
  x86, hwmon: Package Level Thermal/Power: pkgtemp hwmon driver
2010-08-06 10:02:58 -07:00
Linus Torvalds
0f477dd085 Merge branch 'x86-cpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'x86-cpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86: Fix keeping track of AMD C1E
  x86, cpu: Package Level Thermal Control, Power Limit Notification definitions
  x86, cpu: Export AMD errata definitions
  x86, cpu: Use AMD errata checking framework for erratum 383
  x86, cpu: Clean up AMD erratum 400 workaround
  x86, cpu: AMD errata checking framework
  x86, cpu: Split addon_cpuid_features.c
  x86, cpu: Clean up formatting in cpufeature.h, remove override
  x86, cpu: Enumerate xsaveopt
  x86, cpu: Add xsaveopt cpufeature
  x86, cpu: Make init_scattered_cpuid_features() consider cpuid subleaves
  x86, cpu: Support the features flags in new CPUID leaf 7
  x86, cpu: Add CPU flags for F16C and RDRND
  x86: Look for IA32_ENERGY_PERF_BIAS support
  x86, AMD: Extend support to future families
  x86, cacheinfo: Carve out L3 cache slot accessors
  x86, xsave: Cleanup return codes in check_for_xstate()
2010-08-06 10:02:36 -07:00
Linus Torvalds
4aed2fd8e3 Merge branch 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (162 commits)
  tracing/kprobes: unregister_trace_probe needs to be called under mutex
  perf: expose event__process function
  perf events: Fix mmap offset determination
  perf, powerpc: fsl_emb: Restore setting perf_sample_data.period
  perf, powerpc: Convert the FSL driver to use local64_t
  perf tools: Don't keep unreferenced maps when unmaps are detected
  perf session: Invalidate last_match when removing threads from rb_tree
  perf session: Free the ref_reloc_sym memory at the right place
  x86,mmiotrace: Add support for tracing STOS instruction
  perf, sched migration: Librarize task states and event headers helpers
  perf, sched migration: Librarize the GUI class
  perf, sched migration: Make the GUI class client agnostic
  perf, sched migration: Make it vertically scrollable
  perf, sched migration: Parameterize cpu height and spacing
  perf, sched migration: Fix key bindings
  perf, sched migration: Ignore unhandled task states
  perf, sched migration: Handle ignored migrate out events
  perf: New migration tool overview
  tracing: Drop cpparg() macro
  perf: Use tracepoint_synchronize_unregister() to flush any pending tracepoint call
  ...

Fix up trivial conflicts in Makefile and drivers/cpufreq/cpufreq.c
2010-08-06 09:30:52 -07:00
Linus Torvalds
3a3527b646 Merge branch 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  Revert "net: Make accesses to ->br_port safe for sparse RCU"
  mce: convert to rcu_dereference_index_check()
  net: Make accesses to ->br_port safe for sparse RCU
  vfs: add fs.h to define struct file
  lockdep: Add an in_workqueue_context() lockdep-based test function
  rcu: add __rcu API for later sparse checking
  rcu: add an rcu_dereference_index_check()
  tree/tiny rcu: Add debug RCU head objects
  mm: remove all rcu head initializations
  fs: remove all rcu head initializations, except on_stack initializations
  powerpc: remove all rcu head initializations
2010-08-06 09:23:07 -07:00
Linus Torvalds
cc77b4db00 Merge branch 'core-iommu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'core-iommu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86/amd-iommu: Export cache-coherency capability
  iommu-api: Extension to check for interrupt remapping
  x86/amd-iommu: Use for_each_pci_dev()
2010-08-06 09:22:39 -07:00
Eric W. Biederman
5989cd6a1c x86, apic: Map the local apic when parsing the MP table.
This fixes a regression in 2.6.35 from 2.6.34, that is
present for select models of Intel cpus when people are
using an MP table.

The commit cf7500c0ea
"x86, ioapic: In mpparse use mp_register_ioapic" started
calling mp_register_ioapic from MP_ioapic_info.  An extremely
simple change that was obviously correct.  Unfortunately
mp_register_ioapic did just a little more than the previous
hand crafted code and so we gained this call path.

The problem call path is:
MP_ioapic_info()
  mp_register_ioapic()
   io_apic_unique_id()
     io_apic_get_unique_id()
       get_physical_broadcast()
         modern_apic()
           lapic_get_version()
             apic_read(APIC_LVR)

Which turned out to be a problem because the local apic
was not mapped, at that point, unlike the similar point
in the ACPI parsing code.

This problem is fixed by mapping the local apic when
parsing the mptable as soon as we reasonably can.

Looking at the number of places we setup the fixmap for
the local apic, I see some serious simplification opportunities.
For the moment except for not duplicating the setting up of the
fixmap in init_apic_mappings, I have not acted on them.

The regression from 2.6.34 is tracked in bug
https://bugzilla.kernel.org/show_bug.cgi?id=16173

Cc: <stable@kernel.org> 2.6.35
Reported-by: David Hill <hilld@binarystorm.net>
Reported-by: Tvrtko Ursulin <tvrtko.ursulin@sophos.com>
Tested-by: Tvrtko Ursulin <tvrtko.ursulin@sophos.com>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
LKML-Reference: <m1eiee86jg.fsf_-_@fess.ebiederm.org>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2010-08-05 16:26:42 -07:00
Linus Torvalds
89a6c8cb9e Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/linux-2.6-kgdb
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/linux-2.6-kgdb:
  debug_core,kdb: fix crash when arch does not have single step
  kgdb,x86: use macro HBP_NUM to replace magic number 4
  kgdb,mips: remove unused kgdb_cpu_doing_single_step operations
  mm,kdb,kgdb: Add a debug reference for the kdb kmap usage
  KGDB: Remove set but unused newPC
  ftrace,kdb: Allow dumping a specific cpu's buffer with ftdump
  ftrace,kdb: Extend kdb to be able to dump the ftrace buffer
  kgdb,powerpc: Replace hardcoded offset by BREAK_INSTR_SIZE
  arm,kgdb: Add ability to trap into debugger on notify_die
  gdbstub: do not directly use dbg_reg_def[] in gdb_cmd_reg_set()
  gdbstub: Implement gdbserial 'p' and 'P' packets
  kgdb,arm: Individual register get/set for arm
  kgdb,mips: Individual register get/set for mips
  kgdb,x86: Individual register get/set for x86
  kgdb,kdb: individual register set and and get API
  gdbstub: Optimize kgdb's "thread:" response for the gdb serial protocol
  kgdb: remove custom hex_to_bin()implementation
2010-08-05 15:59:48 -07:00
Greg Kroah-Hartman
e9563355ac Staging: Merge staging-next into Linus's tree
Conflicts:
	drivers/staging/Kconfig
	drivers/staging/batman-adv/bat_sysfs.c
	drivers/staging/batman-adv/device.c
	drivers/staging/batman-adv/hard-interface.c
	drivers/staging/cx25821/cx25821-audups11.c

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-05 14:18:03 -07:00
Linus Torvalds
db7a1535d2 Merge branch 'upstream/xen' of git://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen
* 'upstream/xen' of git://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen: (23 commits)
  xen/panic: use xen_reboot and fix smp_send_stop
  Xen: register panic notifier to take crashes of xen guests on panic
  xen: support large numbers of CPUs with vcpu info placement
  xen: drop xen_sched_clock in favour of using plain wallclock time
  pvops: do not notify callers from register_xenstore_notifier
  Introduce CONFIG_XEN_PVHVM compile option
  blkfront: do not create a PV cdrom device if xen_hvm_guest
  support multiple .discard.* sections to avoid section type conflicts
  xen/pvhvm: fix build problem when !CONFIG_XEN
  xenfs: enable for HVM domains too
  x86: Call HVMOP_pagetable_dying on exit_mmap.
  x86: Unplug emulated disks and nics.
  x86: Use xen_vcpuop_clockevent, xen_clocksource and xen wallclock.
  implement O_NONBLOCK for /proc/xen/xenbus
  xen: Fix find_unbound_irq in presence of ioapic irqs.
  xen: Add suspend/resume support for PV on HVM guests.
  xen: Xen PCI platform device driver.
  x86/xen: event channels delivery on HVM.
  x86: early PV on HVM features initialization.
  xen: Add support for HVM hypercalls.
  ...
2010-08-05 13:45:50 -07:00
Dongdong Deng
df4939350b kgdb,x86: use macro HBP_NUM to replace magic number 4
Use the macros provided by the HW breakpoint API.

Signed-off-by: Dongdong Deng <dongdong.deng@windriver.com>
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
2010-08-05 09:22:25 -05:00
Andi Kleen
9264b278be KGDB: Remove set but unused newPC
Found by gcc 4.6's new warnings

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
2010-08-05 09:22:24 -05:00
Jason Wessel
12bfa3de63 kgdb,x86: Individual register get/set for x86
Implement the ability to individually get and set registers for kdb
and kgdb for x86.

Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Acked-by: H. Peter Anvin <hpa@zytor.com>
CC: Ingo Molnar <mingo@redhat.com>
CC: x86@kernel.org
2010-08-05 09:22:20 -05:00
Josh Hunt
a7c55cbee0 oprofile: add support for Intel processor model 30
Newer Intel processors identifying themselves as model 30 are not recognized by
oprofile.

<cpuinfo snippet>
model           : 30
model name      : Intel(R) Xeon(R) CPU           X3470  @ 2.93GHz
</cpuinfo snippet>

Running oprofile on these machines gives the following:
+ opcontrol --init
+ opcontrol --list-events
oprofile: available events for CPU type "Intel Architectural Perfmon"

See Intel 64 and IA-32 Architectures Software Developer's Manual
Volume 3B (Document 253669) Chapter 18 for architectural perfmon events
This is a limited set of fallback events because oprofile doesn't know your CPU
CPU_CLK_UNHALTED: (counter: all)
        Clock cycles when not halted (min count: 6000)
INST_RETIRED: (counter: all)
        number of instructions retired (min count: 6000)
LLC_MISSES: (counter: all)
        Last level cache demand requests from this core that missed the LLC
(min count: 6000)
        Unit masks (default 0x41)
        ----------
        0x41: No unit mask
LLC_REFS: (counter: all)
        Last level cache demand requests from this core (min count: 6000)
        Unit masks (default 0x4f)
        ----------
        0x4f: No unit mask
BR_MISS_PRED_RETIRED: (counter: all)
        number of mispredicted branches retired (precise) (min count: 500)
+ opcontrol --shutdown

Tested using oprofile 0.9.6.

Signed-off-by: Josh Hunt <johunt@akamai.com>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Robert Richter <robert.richter@amd.com>
2010-08-05 12:17:38 +02:00
Ingo Molnar
61be7fdec2 Merge branch 'perf/nmi' into perf/core
Conflicts:
	kernel/Makefile

Merge reason: Add the now complete topic, fix the conflict.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-08-05 08:45:05 +02:00
Linus Torvalds
3cfc2c42c1 Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (48 commits)
  Documentation: update broken web addresses.
  fix comment typo "choosed" -> "chosen"
  hostap:hostap_hw.c Fix typo in comment
  Fix spelling contorller -> controller in comments
  Kconfig.debug: FAIL_IO_TIMEOUT: typo Faul -> Fault
  fs/Kconfig: Fix typo Userpace -> Userspace
  Removing dead MACH_U300_BS26
  drivers/infiniband: Remove unnecessary casts of private_data
  fs/ocfs2: Remove unnecessary casts of private_data
  libfc: use ARRAY_SIZE
  scsi: bfa: use ARRAY_SIZE
  drm: i915: use ARRAY_SIZE
  drm: drm_edid: use ARRAY_SIZE
  synclink: use ARRAY_SIZE
  block: cciss: use ARRAY_SIZE
  comment typo fixes: charater => character
  fix comment typos concerning "challenge"
  arm: plat-spear: fix typo in kerneldoc
  reiserfs: typo comment fix
  update email address
  ...
2010-08-04 15:31:02 -07:00
Jeremy Fitzhardinge
ca50a5f390 Merge branch 'upstream/pvhvm' into upstream/xen
* upstream/pvhvm:
  Introduce CONFIG_XEN_PVHVM compile option
  blkfront: do not create a PV cdrom device if xen_hvm_guest
  support multiple .discard.* sections to avoid section type conflicts
  xen/pvhvm: fix build problem when !CONFIG_XEN
  xenfs: enable for HVM domains too
  x86: Call HVMOP_pagetable_dying on exit_mmap.
  x86: Unplug emulated disks and nics.
  x86: Use xen_vcpuop_clockevent, xen_clocksource and xen wallclock.
  xen: Fix find_unbound_irq in presence of ioapic irqs.
  xen: Add suspend/resume support for PV on HVM guests.
  xen: Xen PCI platform device driver.
  x86/xen: event channels delivery on HVM.
  x86: early PV on HVM features initialization.
  xen: Add support for HVM hypercalls.

Conflicts:
	arch/x86/xen/enlighten.c
	arch/x86/xen/time.c
2010-08-04 14:49:16 -07:00
Jeremy Fitzhardinge
a70ce4b606 Merge branch 'upstream/core' into upstream/xen
* upstream/core:
  xen/panic: use xen_reboot and fix smp_send_stop
  Xen: register panic notifier to take crashes of xen guests on panic
  xen: support large numbers of CPUs with vcpu info placement
  xen: drop xen_sched_clock in favour of using plain wallclock time
  pvops: do not notify callers from register_xenstore_notifier
  xen: make sure pages are really part of domain before freeing
  xen: release unused free memory
2010-08-04 14:49:05 -07:00
Ian Campbell
086748e52f xen/panic: use xen_reboot and fix smp_send_stop
Offline vcpu when using stop_self.

Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
2010-08-04 14:47:31 -07:00
Donald Dutile
f09f6d194d Xen: register panic notifier to take crashes of xen guests on panic
Register a panic notifier so that when the guest crashes it can shut
down the domain and indicate it was a crash to the host.

Signed-off-by: Donald Dutile <ddutile@redhat.com>
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
2010-08-04 14:47:31 -07:00
Mukesh Rathor
c06ee78d73 xen: support large numbers of CPUs with vcpu info placement
When vcpu info placement is supported, we're not limited to MAX_VIRT_CPUS
vcpus.  However, if it isn't supported, then ignore any excess vcpus.

Signed-off-by: Mukesh Rathor <mukesh.rathor@oracle.com>
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
2010-08-04 14:47:30 -07:00
Jeremy Fitzhardinge
8a22b9996b xen: drop xen_sched_clock in favour of using plain wallclock time
xen_sched_clock only counts unstolen time.  In principle this should
be useful to the Linux scheduler so that it knows how much time a process
actually consumed.  But in practice this doesn't work very well as the
scheduler expects the sched_clock time to be synchronized between
cpus.  It also uses sched_clock to measure the time a task spends
sleeping, in which case "unstolen time" isn't meaningful.

So just use plain xen_clocksource_read to return wallclock nanoseconds
for sched_clock.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
2010-08-04 14:47:29 -07:00
Linus Torvalds
6ba74014c1 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6: (1443 commits)
  phy/marvell: add 88ec048 support
  igb: Program MDICNFG register prior to PHY init
  e1000e: correct MAC-PHY interconnect register offset for 82579
  hso: Add new product ID
  can: Add driver for esd CAN-USB/2 device
  l2tp: fix export of header file for userspace
  can-raw: Fix skb_orphan_try handling
  Revert "net: remove zap_completion_queue"
  net: cleanup inclusion
  phy/marvell: add 88e1121 interface mode support
  u32: negative offset fix
  net: Fix a typo from "dev" to "ndev"
  igb: Use irq_synchronize per vector when using MSI-X
  ixgbevf: fix null pointer dereference due to filter being set for VLAN 0
  e1000e: Fix irq_synchronize in MSI-X case
  e1000e: register pm_qos request on hardware activation
  ip_fragment: fix subtracting PPPOE_SES_HLEN from mtu twice
  net: Add getsockopt support for TCP thin-streams
  cxgb4: update driver version
  cxgb4: add new PCI IDs
  ...

Manually fix up conflicts in:
 - drivers/net/e1000e/netdev.c: due to pm_qos registration
   infrastructure changes
 - drivers/net/phy/marvell.c: conflict between adding 88ec048 support
   and cleaning up the IDs
 - drivers/net/wireless/ipw2x00/ipw2100.c: trivial ipw2100_pm_qos_req
   conflict (registration change vs marking it static)
2010-08-04 11:47:58 -07:00
Linus Torvalds
d5fc1d5175 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp:
  amd64_edac: Minor formatting fix
  amd64_edac: Fix operator precendence error
  edac, mc: Improve scrub rate handling
  amd64_edac: Correct scrub rate setting
  amd64_edac: Fix DCT base address selector
  amd64_edac: Remove polling mechanism
  x86, mce: Notify about corrected events too
  amd64_edac: Remove unneeded defines
  edac: Remove EDAC_DEBUG_VERBOSE
  amd64_edac: Sanitize syndrome extraction
2010-08-04 11:23:59 -07:00
Linus Torvalds
8d91530c5f Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq:
  [CPUFREQ] Remove pointless printk from p4-clockmod.
  [CPUFREQ] Fix section mismatch for powernow_cpu_init in powernow-k7.c
  [CPUFREQ] Fix section mismatch for longhaul_cpu_init.
  [CPUFREQ] Fix section mismatch for longrun_cpu_init.
  [CPUFREQ] powernow-k8: Fix misleading variable naming
  [CPUFREQ] Convert pci_table entries to PCI_VDEVICE (if PCI_ANY_ID is used)
  [CPUFREQ] arch/x86/kernel/cpu/cpufreq: use for_each_pci_dev()
  [CPUFREQ] fix brace coding style issue.
  [CPUFREQ] x86 cpufreq: Make trace_power_frequency cpufreq driver independent
  [CPUFREQ] acpi-cpufreq: Fix CPU_ANY CPUFREQ_{PRE,POST}CHANGE notification
  [CPUFREQ] ondemand: don't synchronize sample rate unless multiple cpus present
  [CPUFREQ] unexport (un)lock_policy_rwsem* functions
  [CPUFREQ] ondemand: Refactor frequency increase code
  [CPUFREQ] powernow-k8: On load failure, remind the user to enable support in BIOS setup
  [CPUFREQ] powernow-k8: Limit Pstate transition latency check
  [CPUFREQ] Fix PCC driver error path
  [CPUFREQ] fix double freeing in error path of pcc-cpufreq
  [CPUFREQ] pcc driver should check for pcch method before calling _OSC
  [CPUFREQ] fix memory leak in cpufreq_add_dev
  [CPUFREQ] revert "[CPUFREQ] remove rwsem lock from CPUFREQ_GOV_STOP call (second call site)"

Manually fix up non-data merge conflict introduced by new calling
conventions for trace_power_start() in commit 6f4f2723d0 ("x86
cpufreq: Make trace_power_frequency cpufreq driver independent"), which
didn't update the intel_idle native hardware cpuidle driver.
2010-08-04 11:13:36 -07:00
Linus Torvalds
c145307a11 Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mjg59/platform-drivers-x86
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mjg59/platform-drivers-x86: (88 commits)
  ips driver: make it less chatty
  intel_scu_ipc: fix size field for intel_scu_ipc_command
  intel_scu_ipc: return -EIO for error condition in busy_loop
  intel_scu_ipc: fix data packing of PMIC command on Moorestown
  Clean up command packing on MRST.
  zero the stack buffer before giving random garbage to the SCU
  Fix stack buffer size for IPC writev messages
  intel_scu_ipc: Use the new cpu identification function
  intel_scu_ipc: tidy up unused bits
  Remove indirect read write api support.
  intel_scu_ipc: Support Medfield processors
  intel_scu_ipc: detect CPU type automatically
  x86 plat: limit x86 platform driver menu to X86
  acpi ec_sys: Be more cautious about ec write access
  acpi ec: Fix possible double io port registration
  hp-wmi: acpi_drivers.h is already included through acpi.h two lines below
  hp-wmi: Fix mixing up of and/or directive
  dell-laptop: make dell_laptop_i8042_filter() static
  asus-laptop: fix asus_input_init error path
  msi-wmi: make needlessly global symbols static
  ...
2010-08-04 10:44:06 -07:00
Ingo Molnar
12a81c8df1 Merge branch 'core' of git://git.kernel.org/pub/scm/linux/kernel/git/rric/oprofile into perf/core 2010-08-04 16:25:47 +02:00
Jiri Kosina
d790d4d583 Merge branch 'master' into for-next 2010-08-04 15:14:38 +02:00
Fenghua Yu
0199114c31 x86, hwmon: Package Level Thermal/Power: power limit
Power limit notification feature is published in Intel 64 and IA-32
Architectures SDMV Vol 3A 14.5.6 Power Limit Notification.

It is implemented first on Intel Sandy Bridge platform.

The patch handles notification interrupt. Interrupt handler dumps power limit
information in log_buf, logs the event in mce log, and increases the event
counters (core_power_limit and package_power_limit). Upper level applications
could use the data to detect system health or diagnose functionality/performance
issues.

In the future, the event could be handled in a more fancy way.

Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
LKML-Reference: <1280448826-12004-5-git-send-email-fenghua.yu@intel.com>
Reviewed-by: Len Brown <len.brown@intel.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2010-08-03 15:58:56 -07:00
Fenghua Yu
55d435a227 x86, hwmon: Package Level Thermal/Power: thermal throttling handler
Add package level thermal throttle interrupt support. The interrupt handler
increases package level thermal throttle count. It also logs the event in MCE
log.

The package level thermal throttle interrupt happens across threads in a
package. Each thread handles the interrupt individually. User level application
is supposed to retrieve correct event count and log based on package/thread
topology. This is the same situation for core level interrupt handler. In the
future, interrupt may be reported only per package or per core.

core_throttle_count and package_throttle_count are used for user interface.
Previously only throttle_count is used for core throttle count. If you think
new core_throttle_count name breaks user interface, I can change this part.

Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
LKML-Reference: <1280448826-12004-4-git-send-email-fenghua.yu@intel.com>
Reviewed-by: Len Brown <len.brown@intel.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2010-08-03 15:58:56 -07:00
Fenghua Yu
cb84b19474 x86, hwmon: Package Level Thermal/Power: pkgtemp hwmon driver
This patch adds a hwmon driver for package level thermal control. The driver
dumps package level thermal information through sysfs interface so that upper
level application (e.g. lm_sensor) can retrive the information.

Instead of having the package level hwmon code in coretemp, I write a seperate
driver pkgtemp because:

First, package level thermal sensors include not only sensors for each core,
but also sensors for uncore, memory controller or other components in the
package. Logically it will be clear to have a seperate hwmon driver for package
level hwmon to monitor wider range of sensors in a package. Merging package
thermal driver into core thermal driver doesn't make sense and may mislead.

Secondly, merging the two drivers together may cause coding mess. It's easier
to include various package level sensors info if more sensor information is
implemented. Coretemp code needs to consider a lot of legacy machine cases.
Pkgtemp code only considers platform starting from Sandy Bridge.

On a 1Sx4Cx2T Sandy Bridge platform, lm-sensors dumps the pkgtemp and coretemp:

pkgtemp-isa-0000
Adapter: ISA adapter
physical id 0: +33.0°C  (high = +79.0°C, crit = +99.0°C)

coretemp-isa-0000
Adapter: ISA adapter
Core 0:      +32.0°C  (high = +79.0°C, crit = +99.0°C)

coretemp-isa-0001
Adapter: ISA adapter
Core 1:      +32.0°C  (high = +79.0°C, crit = +99.0°C)

coretemp-isa-0002
Adapter: ISA adapter
Core 2:      +32.0°C  (high = +79.0°C, crit = +99.0°C)

coretemp-isa-0003
Adapter: ISA adapter
Core 3:      +32.0°C  (high = +79.0°C, crit = +99.0°C)

[ hpa: folded v3 patch removing improper global variable "SHOW" ]

Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
LKML-Reference: <1280448826-12004-3-git-send-email-fenghua.yu@intel.com>
Reviewed-by: Len Brown <len.brown@intel.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2010-08-03 15:58:07 -07:00
Dave Jones
9d1f44ee20 [CPUFREQ] Remove pointless printk from p4-clockmod.
The only machines this is triggering on should be supported by
acpi-cpufreq or acpi's internal throttling.

Signed-off-by: Dave Jones <davej@redhat.com>
2010-08-03 13:47:30 -04:00
Holger Freyther
307069cf6c [CPUFREQ] Fix section mismatch for powernow_cpu_init in powernow-k7.c
Use __cpuinit instead of __init for the cpufreq_driver
init function like it is done in powernow-k8.c.

This is removing the warning generated when compiling with
the CONFIG_DEBUG_SECTION_MISMATCH=y option.

Signed-off-by: Holger Hans Peter Freyther <holger@moiji-mobile.com>
Signed-off-by: Dave Jones <davej@redhat.com>
2010-08-03 13:47:06 -04:00
Holger Freyther
2530573e45 [CPUFREQ] Fix section mismatch for longhaul_cpu_init.
Use __cpuinit instead of __init for the cpufreq_driver
init function like it is done in powernow-k8.c. Use the
__cpuinitdata for data used by the routines marked as __cpuinit.

This is removing the warning generated when compiling with
the CONFIG_DEBUG_SECTION_MISMATCH=y option.

Signed-off-by: Holger Hans Peter Freyther <holger@moiji-mobile.com>
Signed-off-by: Dave Jones <davej@redhat.com>
2010-08-03 13:47:06 -04:00
Holger Freyther
7e2d811220 [CPUFREQ] Fix section mismatch for longrun_cpu_init.
Use __cpuinit instead of __init for the cpufreq_driver
init function like it is done in powernow-k8.c.

This is removing the warning generated when compiling with
the CONFIG_DEBUG_SECTION_MISMATCH=y option.

Signed-off-by: Holger Hans Peter Freyther <holger@moiji-mobile.com>
Signed-off-by: Dave Jones <davej@redhat.com>
2010-08-03 13:47:06 -04:00
Borislav Petkov
b30d3304c9 [CPUFREQ] powernow-k8: Fix misleading variable naming
rdmsr() takes the lower 32 bits as a second argument and the high 32 as
a third. Fix the names accordingly since they were swapped.

There should be no functionality change resulting from this patch.

Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
Signed-off-by: Dave Jones <davej@redhat.com>
2010-08-03 13:47:06 -04:00
Peter Huewe
55c789bb2b [CPUFREQ] Convert pci_table entries to PCI_VDEVICE (if PCI_ANY_ID is used)
This patch converts pci_table entries, where .subvendor=PCI_ANY_ID and
.subdevice=PCI_ANY_ID, .class=0 and .class_mask=0, to use the
PCI_VDEVICE macro, and thus improves readability.

Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Signed-off-by: Dave Jones <davej@redhat.com>
2010-08-03 13:47:05 -04:00
Kulikov Vasiliy
ccc5638a20 [CPUFREQ] arch/x86/kernel/cpu/cpufreq: use for_each_pci_dev()
Use for_each_pci_dev() to simplify the code.

Signed-off-by: Kulikov Vasiliy <segooon@gmail.com>
Signed-off-by: Dave Jones <davej@redhat.com>
2010-08-03 13:47:05 -04:00
Thomas Renninger
6f4f2723d0 [CPUFREQ] x86 cpufreq: Make trace_power_frequency cpufreq driver independent
and fix the broken case if a core's frequency depends on others.

trace_power_frequency was only implemented in a rather ungeneric way
in acpi-cpufreq driver's target() function only.
-> Move the call to trace_power_frequency to
   cpufreq.c:cpufreq_notify_transition() where CPUFREQ_POSTCHANGE
   notifier is triggered.
   This will support power frequency tracing by all cpufreq drivers

trace_power_frequency did not trace frequency changes correctly when
the userspace governor was used or when CPU cores' frequency depend
on each other.
-> Moving this into the CPUFREQ_POSTCHANGE notifier and pass the cpu
   which gets switched automatically fixes this.

Robert Schoene provided some important fixes on top of my initial
quick shot version which are integrated in this patch:
- Forgot some changes in power_end trace (TP_printk/variable names)
- Variable dummy in power_end must now be cpu_id
- Use static 64 bit variable instead of unsigned int for cpu_id

Signed-off-by: Thomas Renninger <trenn@suse.de>
CC: davej@redhat.com
CC: arjan@infradead.org
CC: linux-kernel@vger.kernel.org
CC: robert.schoene@tu-dresden.de
Tested-by: robert.schoene@tu-dresden.de
Signed-off-by: Dave Jones <davej@redhat.com>
2010-08-03 13:47:05 -04:00
Thomas Renninger
6b72e3934b [CPUFREQ] acpi-cpufreq: Fix CPU_ANY CPUFREQ_{PRE,POST}CHANGE notification
Signed-off-by: Thomas Renninger <trenn@suse.de>
CC: venki@google.com
CC: davej@redhat.com
CC: arjan@infradead.org
CC: linux-kernel@vger.kernel.org
Signed-off-by: Dave Jones <davej@redhat.com>
2010-08-03 13:47:05 -04:00
Marti Raudsepp
298decfbc4 [CPUFREQ] powernow-k8: On load failure, remind the user to enable support in BIOS setup
On Wed, 2010-01-20 at 16:56 +0100, Thomas Renninger wrote:
> But most often this happens if people upgrade their CPU and do not
> update their BIOS.
> Or the vendor does not recognise the new CPU even if the BIOS got
> updated.

Maybe some of those people just didn't realize it was disabled in BIOS?
If you tell users that it's a firmware bug then they'll probably just
give up.

> The itself message might be an enhancment, IMO it's not worth a patch.

Why do you think so? I spent an hour on hunting down the BIOS upgrade,
only to find that it didn't improve anything. It was a day later that I
realized that it might be a BIOS option; and the option was literally
the _last_ option in the whole BIOS setup. :)

This message would have saved the day.

> But do not revert the FW_BUG part!

Sure, you have a point here.

How about this patch?
2010-08-03 13:47:04 -04:00
Borislav Petkov
c2f4a2c6e0 [CPUFREQ] powernow-k8: Limit Pstate transition latency check
The Pstate transition latency check was added for broken F10h BIOSen
which wrongly contain a value of 0 for transition and bus master
latency. Fam11h and later, however, (will) have similar transition
latency so extend that behavior for them too.

Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
Signed-off-by: Dave Jones <davej@redhat.com>
2010-08-03 13:47:03 -04:00
Matthew Garrett
6ebdf777ba [CPUFREQ] Fix PCC driver error path
The PCC cpufreq driver unmaps the mailbox address range if any CPUs fail to
initialise, but doesn't do anything to remove the registered CPUs from the
cpufreq core resulting in failures further down the line. We're better off
simply returning a failure - the cpufreq core will unregister us cleanly if
we end up with no successfully registered CPUs. Tidy up the failure path
and also add a sanity check to ensure that the firmware gives us a realistic
frequency - the core deals badly with that being set to 0.

Signed-off-by: Matthew Garrett <mjg@redhat.com>
Cc: Naga Chumbalkar <nagananda.chumbalkar@hp.com>
Signed-off-by: Dave Jones <davej@redhat.com>
2010-08-03 13:47:02 -04:00
Daniel J Blueman
0d9715d64f [CPUFREQ] fix double freeing in error path of pcc-cpufreq
Prevent double freeing on error path.

Signed-off-by: Daniel J Blueman <daniel.blueman@gmail.com>
Signed-off-by: Dave Jones <davej@redhat.com>
2010-08-03 13:47:02 -04:00
Matthew Garrett
5d77b85458 [CPUFREQ] pcc driver should check for pcch method before calling _OSC
The pcc specification documents an _OSC method that's incompatible with the
one defined as part of the ACPI spec. This shouldn't be a problem as both
are supposed to be guarded with a UUID. Unfortunately approximately nobody
(including HP, who wrote this spec) properly check the UUID on entry to the
_OSC call. Right now this could result in surprising behaviour if the pcc
driver performs an _OSC call on a machine that doesn't implement the pcc
specification. Check whether the PCCH method exists first in order to reduce
this probability.

Signed-off-by: Matthew Garrett <mjg@redhat.com>
Cc: Naga Chumbalkar <nagananda.chumbalkar@hp.com>
Signed-off-by: Dave Jones <davej@redhat.com>
2010-08-03 13:47:02 -04:00
Borislav Petkov
98a5ae2d99 x86, mce: Notify about corrected events too
Notify all parties registered on the mce decoder chain about logged
correctable MCEs.

Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
Acked-by: Doug Thompson <dougthompson@xmission.com>
Acked-by: Ingo Molnar <mingo@elte.hu>
2010-08-03 16:14:02 +02:00
Sreedhara DS
804f8681a9 Remove indirect read write api support.
The firmware of production devices does not support this interface so this
is dead code.

Signed-off-by: Sreedhara DS <sreedhara.ds@intel.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
2010-08-03 09:50:30 -04:00
Feng Tang
35f2915c3b intel_scu_ipc: add definitions for vRTC related command
Signed-off-by: Feng Tang <feng.tang@intel.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
2010-08-03 09:48:47 -04:00
H. Peter Anvin
6238b47b58 x86, setup: move isdigit.h to ctype.h, header files on top.
It is a subset of <ctype.h> functionality, so name it ctype.h.  Also,
reorganize header files so #include statements are clustered near the
top as they should be.

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
LKML-Reference: <4C5752F2.8030206@kernel.org>
2010-08-02 21:07:20 -07:00
Yinghai Lu
8fee13a48e x86, setup: enable early console output from the decompressor
This enables the decompressor output to be seen on the serial console.
Most of the code is shared with the regular boot code.

We could add printf to the decompressor if needed, but currently there
is no sufficiently compelling user.

-v2: define BOOT_BOOT_H to avoid include boot.h
-v3: early_serial_base need to be static in misc.c ?
-v4: create seperate string.c printf.c cmdline.c early_serial_console.c
     after hpa's patch that allow global variables in compressed/misc stage
-v5: remove printf.c related

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-08-02 20:32:20 -07:00
Alok Kataria
9f242dc10e x86, vmware: Preset lpj values when on VMware.
When running on VMware's platform, we have seen situations where
the AP's try to calibrate the lpj values and fail to get good calibration
runs becasue of timing issues. As a result delays don't work correctly
on all cpus.

The solutions is to set preset_lpj value based on the current tsc frequency
value. This is similar to what KVM does as well.

Signed-off-by: Alok N Kataria <akataria@vmware.com>
LKML-Reference: <1280790637.14933.29.camel@ank32.eng.vmware.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2010-08-02 17:16:30 -07:00
Yinghai Lu
f4ed2877b1 x86, setup: reorganize the early console setup
Separate early_serial_console from tty.c

This allows for reuse of
early_serial_console.c/string.c/printf.c/cmdline.c in boot/compressed/.

-v2: according to hpa, don't include string.c etc
-v3: compressed/misc.c must have early_serial_base as static, so move it back to tty.c
     for setup code

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
LKML-Reference: <4C568D2B.205@kernel.org>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2010-08-02 15:51:56 -07:00
H. Peter Anvin
22a57f5896 x86, setup: Allow global variables and functions in the decompressor
In order for global variables and functions to work in the
decompressor, we need to fix up the GOT in assembly code.

Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
LKML-Reference: <4C57382E.8050501@zytor.com>
2010-08-02 15:34:44 -07:00
Shaohua Li
be783a4721 x86, vdso: Unmap vdso pages
We mapped vdso pages but never unmapped them and the virtual address
is lost after exiting from the function, so unmap vdso pages here.

Signed-off-by: Shaohua Li <shaohua.li@intel.com>
LKML-Reference: <20100802004934.GA2505@sli10-desk.sh.intel.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2010-08-02 15:11:59 -07:00
Konrad Rzeszutek Wilk
fe96eb404e x86: Detect whether we should use Xen SWIOTLB.
It is paramount that we call pci_xen_swiotlb_detect before
pci_swiotlb_detect as both implementations use the 'swiotlb'
and 'swiotlb_force' flags. The pci-xen_swiotlb_detect inhibits
the swiotlb_force and swiotlb flag so that the native SWIOTLB
implementation is not enabled when running under Xen.

[since v1 changed two Cc's to Acked-by]

Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Acked-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Acked-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
    [http://lkml.org/lkml/2010/7/27/374]
Cc: Albert Herranz <albert_herranz@yahoo.es>
Cc: Ian Campbell <Ian.Campbell@citrix.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Acked-by: "H. Peter Anvin" <hpa@zytor.com>
    [conditional http://lkml.org/lkml/2010/8/2/324]
Cc: x86@kernel.org
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-08-02 15:18:33 -04:00
Michal Schmidt
e8c534ec06 x86: Fix keeping track of AMD C1E
Accomodate the original C1E-aware idle routine to the different times
during boot when the BIOS enables C1E. While at it, remove the synthetic
CPUID flag in favor of a single global setting which denotes C1E status
on the system.

[ hpa: changed c1e_enabled to be a bool; clarified cpu bit 3:21 comment ]

Signed-off-by: Michal Schmidt <mschmidt@redhat.com>
LKML-Reference: <20100727165335.GA11630@aftab>
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
2010-08-02 08:45:56 -07:00
Ingo Molnar
3772b73472 Merge commit 'v2.6.35' into perf/core
Conflicts:
	tools/perf/Makefile
	tools/perf/util/hist.c

Merge reason: Resolve the conflicts and update to latest upstream.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-08-02 08:31:54 +02:00
Avi Kivity
3444d7da18 KVM: VMX: Fix host GDT.LIMIT corruption
vmx does not restore GDT.LIMIT to the host value, instead it sets it to 64KB.
This means host userspace can learn a few bits of host memory.

Fix by reloading GDTR when we load other host state.

Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-08-02 08:10:18 +03:00
Xiao Guangrong
9a3aad7057 KVM: MMU: using __xchg_spte more smarter
Sometimes, atomically set spte is not needed, this patch call __xchg_spte()
more smartly

Note: if the old mapping's access bit is already set, we no need atomic operation
since the access bit is not lost

Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-08-02 06:41:01 +03:00
Xiao Guangrong
e4b502ead2 KVM: MMU: cleanup spte set and accssed/dirty tracking
Introduce set_spte_track_bits() to cleanup current code

Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-08-02 06:41:00 +03:00
Xiao Guangrong
be233d49ea KVM: MMU: don't atomicly set spte if it's not present
If the old mapping is not present, the spte.a is not lost, so no need
atomic operation to set it

Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-08-02 06:40:59 +03:00
Xiao Guangrong
9ed5520dd3 KVM: MMU: fix page dirty tracking lost while sync page
In sync-page path, if spte.writable is changed, it will lose page dirty
tracking, for example:

assume spte.writable = 0 in a unsync-page, when it's synced, it map spte
to writable(that is spte.writable = 1), later guest write spte.gfn, it means
spte.gfn is dirty, then guest changed this mapping to read-only, after it's
synced,  spte.writable = 0

So, when host release the spte, it detect spte.writable = 0 and not mark page
dirty

Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-08-02 06:40:58 +03:00
Xiao Guangrong
daa3db693c KVM: MMU: fix broken page accessed tracking with ept enabled
In current code, if ept is enabled(shadow_accessed_mask = 0), the page
accessed tracking is lost.

Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-08-02 06:40:57 +03:00
Xiao Guangrong
fa1de2bfc0 KVM: MMU: add missing reserved bits check in speculative path
In the speculative path, we should check guest pte's reserved bits just as
the real processor does

Reported-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-08-02 06:40:56 +03:00
Andrea Arcangeli
6e3e243c3b KVM: MMU: fix mmu notifier invalidate handler for huge spte
The index wasn't calculated correctly (off by one) for huge spte so KVM guest
was unstable with transparent hugepages.

Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Reviewed-by: Reviewed-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-08-02 06:40:54 +03:00
Wei Yongjun
c19b8bd60e KVM: x86 emulator: fix xchg instruction emulation
If the destination is a memory operand and the memory cannot
map to a valid page, the xchg instruction emulation and locked
instruction will not work on io regions and stuck in endless
loop. We should emulate exchange as write to fix it.

Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com>
Acked-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-08-02 06:40:53 +03:00
Gleb Natapov
9195c4da26 KVM: x86: Call mask notifiers from pic
If pit delivers interrupt while pic is masking it OS will never do EOI
and ack notifier will not be called so when pit will be unmasked no pit
interrupts will be delivered any more. Calling mask notifiers solves this
issue.

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-08-02 06:40:52 +03:00
Gleb Natapov
68be080345 KVM: x86: never re-execute instruction with enabled tdp
With tdp enabled we should get into emulator only when emulating io, so
reexecution will always bring us back into emulator.

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-08-02 06:40:51 +03:00
Gleb Natapov
c0e0608cb9 KVM: x86: emulator: inc/dec can have lock prefix
Mark inc (0xfe/0 0xff/0) and dec (0xfe/1 0xff/1) as lock prefix capable.

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-08-02 06:40:49 +03:00
Avi Kivity
24157aaf83 KVM: MMU: Eliminate redundant temporaries in FNAME(fetch)
'level' and 'sptep' are aliases for 'interator.level' and 'iterator.sptep', no
need for them.

Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-08-02 06:40:48 +03:00
Avi Kivity
5991b33237 KVM: MMU: Validate all gptes during fetch, not just those used for new pages
Currently, when we fetch an spte, we only verify that gptes match those that
the walker saw if we build new shadow pages for them.

However, this misses the following race:

  vcpu1            vcpu2

  walk
                  change gpte
                  walk
                  instantiate sp

  fetch existing sp

Fix by validating every gpte, regardless of whether it is used for building
a new sp or not.

Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-08-02 06:40:47 +03:00
Avi Kivity
0b3c933302 KVM: MMU: Simplify spte fetch() function
Partition the function into three sections:

- fetching indirect shadow pages (host_level > guest_level)
- fetching direct shadow pages (page_level < host_level <= guest_level)
- the final spte (page_level == host_level)

Instead of the current spaghetti.

A slight change from the original code is that we call validate_direct_spte()
more often: previously we called it only for gw->level, now we also call it for
lower levels.  The change should have no effect.

[xiao: fix regression caused by validate_direct_spte() called too late]

Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-08-02 06:40:45 +03:00
Avi Kivity
39c8c672a1 KVM: MMU: Add gpte_valid() helper
Move the code to check whether a gpte has changed since we fetched it into
a helper.

Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-08-02 06:40:44 +03:00
Avi Kivity
a357bd229c KVM: MMU: Add validate_direct_spte() helper
Add a helper to verify that a direct shadow page is valid wrt the required
access permissions; drop the page if it is not valid.

Reviewed-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-08-02 06:40:43 +03:00
Avi Kivity
a3aa51cfaa KVM: MMU: Add drop_large_spte() helper
To clarify spte fetching code, move large spte handling into a helper.

Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-08-02 06:40:42 +03:00
Avi Kivity
121eee97a7 KVM: MMU: Use __set_spte to link shadow pages
To avoid split accesses to 64 bit sptes on i386, use __set_spte() to link
shadow pages together.

(not technically required since shadow pages are __GFP_KERNEL, so upper 32
bits are always clear)

Reviewed-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-08-02 06:40:41 +03:00
Avi Kivity
32ef26a359 KVM: MMU: Add link_shadow_page() helper
To simplify the process of fetching an spte, add a helper that links
a shadow page to an spte.

Reviewed-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-08-02 06:40:40 +03:00
Avi Kivity
908e75f3e7 KVM: Expose MCE control MSRs to userspace
Userspace needs to reset and save/restore these MSRs.

The MCE banks are not exposed since their number varies from vcpu to vcpu.

Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-08-02 06:40:36 +03:00
Xiao Guangrong
aea924f606 KVM: PIT: stop vpit before freeing irq_routing
Fix:
general protection fault: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC
......
Call Trace:
 [<ffffffffa0159bd1>] ? kvm_set_irq+0xdd/0x24b [kvm]
 [<ffffffff8106ea8b>] ? trace_hardirqs_off_caller+0x1f/0x10e
 [<ffffffff813ad17f>] ? sub_preempt_count+0xe/0xb6
 [<ffffffff8106d273>] ? put_lock_stats+0xe/0x27
...
RIP  [<ffffffffa0159c72>] kvm_set_irq+0x17e/0x24b [kvm]

This bug is triggered when guest is shutdown, is because we freed
irq_routing before pit thread stopped

Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-08-02 06:40:35 +03:00
Gleb Natapov
a6f177efaa KVM: Reenter guest after emulation failure if due to access to non-mmio address
When shadow pages are in use sometimes KVM try to emulate an instruction
when it accesses a shadowed page. If emulation fails KVM un-shadows the
page and reenter guest to allow vcpu to execute the instruction. If page
is not in shadow page hash KVM assumes that this was attempt to do MMIO
and reports emulation failure to userspace since there is no way to fix
the situation. This logic has a race though. If two vcpus tries to write
to the same shadowed page simultaneously both will enter emulator, but
only one of them will find the page in shadow page hash since the one who
founds it also removes it from there, so another cpu will report failure
to userspace and will abort the guest.

Fix this by checking (in addition to checking shadowed page hash) that
page that caused the emulation belongs to valid memory slot. If it is
then reenter the guest to allow vcpu to reexecute the instruction.

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-08-02 06:40:34 +03:00
Gleb Natapov
edba23e515 KVM: Return EFAULT from kvm ioctl when guest accesses bad area
Currently if guest access address that belongs to memory slot but is not
backed up by page or page is read only KVM treats it like MMIO access.
Remove that capability. It was never part of the interface and should
not be relied upon.

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-08-02 06:40:33 +03:00
Jiri Slaby
673813e81d KVM: fix lock imbalance in kvm_create_pit()
Stanse found that there is an omitted unlock in kvm_create_pit in one fail
path. Add proper unlock there.

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Cc: Avi Kivity <avi@redhat.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: x86@kernel.org
Cc: Gleb Natapov <gleb@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Gregory Haskins <ghaskins@novell.com>
Cc: kvm@vger.kernel.org
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-08-02 06:40:31 +03:00
Avi Kivity
f59c1d2ded KVM: MMU: Keep going on permission error
Real hardware disregards permission errors when computing page fault error
code bit 0 (page present).  Do the same.

Reviewed-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-08-02 06:40:30 +03:00
Avi Kivity
b0eeec29fe KVM: MMU: Only indicate a fetch fault in page fault error code if nx is enabled
Bit 4 of the page fault error code is set only if EFER.NX is set.

Reviewed-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-08-02 06:40:29 +03:00
Wei Yongjun
5d55f299f9 KVM: x86 emulator: re-implementing 'mov AL,moffs' instruction decoding
This patch change to use DstAcc for decoding 'mov AL, moffs'
and introduced SrcAcc for decoding 'mov moffs, AL'.

Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-08-02 06:40:27 +03:00
Wei Yongjun
07cbc6c185 KVM: x86 emulator: fix cli/sti instruction emulation
If IOPL check fail, the cli/sti emulate GP and then we should
skip writeback since the default write OP is OP_REG.

Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-08-02 06:40:26 +03:00
Wei Yongjun
b16b2b7bb5 KVM: x86 emulator: fix 'mov rm,sreg' instruction decoding
The source operand of 'mov rm,sreg' is segment register, not
general-purpose register, so remove SrcReg from decoding.

Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-08-02 06:40:25 +03:00
Wei Yongjun
e97e883f8b KVM: x86 emulator: fix 'and AL,imm8' instruction decoding
'and AL,imm8' should be mask as ByteOp, otherwise the dest operand
length will no correct and we may fill the full EAX when writeback.

Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-08-02 06:40:24 +03:00
Wei Yongjun
ce7a0ad3bd KVM: x86 emulator: fix the comment of out instruction
Fix the comment of out instruction, using the same style as the
other instructions.

Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-08-02 06:40:23 +03:00
Wei Yongjun
a5046e6c7d KVM: x86 emulator: fix 'mov sreg,rm16' instruction decoding
Memory reads for 'mov sreg,rm16' should be 16 bits only.

Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-08-02 06:40:22 +03:00
Avi Kivity
b79b93f92c KVM: MMU: Don't drop accessed bit while updating an spte
__set_spte() will happily replace an spte with the accessed bit set with
one that has the accessed bit clear.  Add a helper update_spte() which checks
for this condition and updates the page flag if needed.

Signed-off-by: Avi Kivity <avi@redhat.com>
2010-08-02 06:40:21 +03:00
Avi Kivity
a9221dd5ec KVM: MMU: Atomically check for accessed bit when dropping an spte
Currently, in the window between the check for the accessed bit, and actually
dropping the spte, a vcpu can access the page through the spte and set the bit,
which will be ignored by the mmu.

Fix by using an exchange operation to atmoically fetch the spte and drop it.

Signed-off-by: Avi Kivity <avi@redhat.com>
2010-08-02 06:40:20 +03:00
Avi Kivity
ce061867aa KVM: MMU: Move accessed/dirty bit checks from rmap_remove() to drop_spte()
Since we need to make the check atomic, move it to the place that will
set the new spte.

Signed-off-by: Avi Kivity <avi@redhat.com>
2010-08-02 06:40:18 +03:00
Avi Kivity
be38d276b0 KVM: MMU: Introduce drop_spte()
When we call rmap_remove(), we (almost) always immediately follow it by
an __set_spte() to a nonpresent pte.  Since we need to perform the two
operations atomically, to avoid losing the dirty and accessed bits, introduce
a helper drop_spte() and convert all call sites.

The operation is still nonatomic at this point.

Signed-off-by: Avi Kivity <avi@redhat.com>
2010-08-02 06:40:17 +03:00
Xiao Guangrong
dd180b3e90 KVM: VMX: fix tlb flush with invalid root
Commit 341d9b535b6c simplify reload logic while entry guest mode, it
can avoid unnecessary sync-root if KVM_REQ_MMU_RELOAD and
KVM_REQ_MMU_SYNC both set.

But, it cause a issue that when we handle 'KVM_REQ_TLB_FLUSH', the
root is invalid, it is triggered during my test:

Kernel BUG at ffffffffa00212b8 [verbose debug info unavailable]
......

Fixed by directly return if the root is not ready.

Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-08-02 06:40:16 +03:00
Marcin Slusarz
cc05152ab7 x86,mmiotrace: Add support for tracing STOS instruction
Add support for stos access tracing with mmiotrace.

Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com>
Acked-by: Pekka Paalanen <pq@iki.fi>
Cc: Nouveau <nouveau@lists.freedesktop.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <20100731205101.GA5860@joi.lan>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
2010-08-02 01:32:01 +02:00
Brian Gerst
72c511dd59 x86-32, asm: Directly access per-cpu GDT
Use a direct per-cpu reference for the GDT instead of using a scratch
register.

Signed-off-by: Brian Gerst <brgerst@gmail.com>
LKML-Reference: <1280594903-6341-2-git-send-email-brgerst@gmail.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-08-01 16:05:23 -07:00
Brian Gerst
c15a5958a0 x86-64, asm: Directly access per-cpu IST
Use a direct per-cpu reference for the IST instead of using a scratch
register.

Signed-off-by: Brian Gerst <brgerst@gmail.com>
LKML-Reference: <1280594903-6341-1-git-send-email-brgerst@gmail.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-08-01 16:05:17 -07:00
Joerg Roedel
828554136b KVM: Remove unnecessary divide operations
This patch converts unnecessary divide and modulo operations
in the KVM large page related code into logical operations.
This allows to convert gfn_t to u64 while not breaking 32
bit builds.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-08-01 10:47:30 +03:00
Xiao Guangrong
84754cd8fc KVM: MMU: cleanup FNAME(fetch)() functions
Cleanup this function that we are already get the direct sp's access

Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-08-01 10:47:26 +03:00
Xiao Guangrong
9e7b0e7fba KVM: MMU: fix direct sp's access corrupted
If the mapping is writable but the dirty flag is not set, we will find
the read-only direct sp and setup the mapping, then if the write #PF
occur, we will mark this mapping writable in the read-only direct sp,
now, other real read-only mapping will happily write it without #PF.

It may hurt guest's COW

Fixed by re-install the mapping when write #PF occur.

Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-08-01 10:47:25 +03:00
Xiao Guangrong
5fd5387c89 KVM: MMU: fix conflict access permissions in direct sp
In no-direct mapping, we mark sp is 'direct' when we mapping the
guest's larger page, but its access is encoded form upper page-struct
entire not include the last mapping, it will cause access conflict.

For example, have this mapping:
        [W]
      / PDE1 -> |---|
  P[W]          |   | LPA
      \ PDE2 -> |---|
        [R]

P have two children, PDE1 and PDE2, both PDE1 and PDE2 mapping the
same lage page(LPA). The P's access is WR, PDE1's access is WR,
PDE2's access is RO(just consider read-write permissions here)

When guest access PDE1, we will create a direct sp for LPA, the sp's
access is from P, is W, then we will mark the ptes is W in this sp.

Then, guest access PDE2, we will find LPA's shadow page, is the same as
PDE's, and mark the ptes is RO.

So, if guest access PDE1, the incorrect #PF is occured.

Fixed by encode the last mapping access into direct shadow page

Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-08-01 10:47:23 +03:00
Xiao Guangrong
36a2e6774b KVM: MMU: fix writable sync sp mapping
While we sync many unsync sp at one time(in mmu_sync_children()),
we may mapping the spte writable, it's dangerous, if one unsync
sp's mapping gfn is another unsync page's gfn.

For example:

SP1.pte[0] = P
SP2.gfn's pfn = P
[SP1.pte[0] = SP2.gfn's pfn]

First, we write protected SP1 and SP2, but SP1 and SP2 are still the
unsync sp.

Then, sync SP1 first, it will detect SP1.pte[0].gfn only has one unsync-sp,
that is SP2, so it will mapping it writable, but we plan to sync SP2 soon,
at this point, the SP2->unsync is not reliable since later we sync SP2 but
SP2->gfn is already writable.

So the final result is: SP2 is the sync page but SP2.gfn is writable.

This bug will corrupt guest's page table, fixed by mark read-only mapping
if the mapped gfn has shadow pages.

Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-08-01 10:47:22 +03:00
Sheng Yang
f5f48ee15c KVM: VMX: Execute WBINVD to keep data consistency with assigned devices
Some guest device driver may leverage the "Non-Snoop" I/O, and explicitly
WBINVD or CLFLUSH to a RAM space. Since migration may occur before WBINVD or
CLFLUSH, we need to maintain data consistency either by:
1: flushing cache (wbinvd) when the guest is scheduled out if there is no
wbinvd exit, or
2: execute wbinvd on all dirty physical CPUs when guest wbinvd exits.

Signed-off-by: Yaozu (Eddie) Dong <eddie.dong@intel.com>
Signed-off-by: Sheng Yang <sheng@linux.intel.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-08-01 10:47:21 +03:00
Avi Kivity
3e00750947 KVM: Simplify vcpu_enter_guest() mmu reload logic slightly
No need to reload the mmu in between two different vcpu->requests checks.

kvm_mmu_reload() may trigger KVM_REQ_TRIPLE_FAULT, but that will be caught
during atomic guest entry later.

Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-08-01 10:47:19 +03:00
Chris Lalancette
529df65e39 KVM: Search the LAPIC's for one that will accept a PIC interrupt
Older versions of 32-bit linux have a "Checking 'hlt' instruction"
test where they repeatedly call the 'hlt' instruction, and then
expect a timer interrupt to kick the CPU out of halt.  This happens
before any LAPIC or IOAPIC setup happens, which means that all of
the APIC's are in virtual wire mode at this point.  Unfortunately,
the current implementation of virtual wire mode is hardcoded to
only kick the BSP, so if a crash+kexec occurs on a different
vcpu, it will never get kicked.

This patch makes pic_unlock() do the equivalent of
kvm_irq_delivery_to_apic() for the IOAPIC code.  That is, it runs
through all of the vcpus looking for one that is in virtual wire
mode.  In the normal case where LAPICs and IOAPICs are configured,
this won't be used at all.  In the bootstrap phase of a modern
OS, before the LAPICs and IOAPICs are configured, this will have
exactly the same behavior as today; VCPU0 is always looked at
first, so it will always get out of the loop after the first
iteration.  This will only go through the loop more than once
during a kexec/kdump, in which case it will only do it a few times
until the kexec'ed kernel programs the LAPIC and IOAPIC.

Signed-off-by: Chris Lalancette <clalance@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-08-01 10:47:17 +03:00
Sheng Yang
6c3f604117 KVM: x86: Enable AVX for guest
Enable Intel(R) Advanced Vector Extension(AVX) for guest.

The detection of AVX feature includes OSXSAVE bit testing. When OSXSAVE bit is
not set, even if AVX is supported, the AVX instruction would result in UD as
well. So we're safe to expose AVX bits to guest directly.

Signed-off-by: Sheng Yang <sheng@linux.intel.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-08-01 10:47:10 +03:00
Avi Kivity
7ac77099ce KVM: Prevent internal slots from being COWed
If a process with a memory slot is COWed, the page will change its address
(despite having an elevated reference count).  This breaks internal memory
slots which have their physical addresses loaded into vmcs registers (see
the APIC access memory slot).

Signed-off-by: Avi Kivity <avi@redhat.com>
2010-08-01 10:47:08 +03:00
Avi Kivity
a8eeb04a44 KVM: Add mini-API for vcpu->requests
Makes it a little more readable and hackable.

Signed-off-by: Avi Kivity <avi@redhat.com>
2010-08-01 10:47:05 +03:00
Avi Kivity
36633f32ba KVM: i8259: simplify pic_irq_request() calling sequence
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-08-01 10:47:04 +03:00
Avi Kivity
073d46133a KVM: i8259: reduce excessive abstraction for pic_irq_request()
Part of the i8259 code pretends it isn't part of kvm, but we know better.
Reduce excessive abstraction, eliminating callbacks and void pointers.

Signed-off-by: Avi Kivity <avi@redhat.com>
2010-08-01 10:47:03 +03:00
Avi Kivity
b74a07beed KVM: Remove kernel-allocated memory regions
Equivalent (and better) functionality is provided by user-allocated memory
regions.

Signed-off-by: Avi Kivity <avi@redhat.com>
2010-08-01 10:47:01 +03:00
Avi Kivity
a1f4d39500 KVM: Remove memory alias support
As advertised in feature-removal-schedule.txt.  Equivalent support is provided
by overlapping memory regions.

Signed-off-by: Avi Kivity <avi@redhat.com>
2010-08-01 10:47:00 +03:00
Avi Kivity
d1ac91d8a2 KVM: Consolidate load/save temporary buffer allocation and freeing
Instead of three temporary variables and three free calls, have one temporary
variable (with four names) and one free call.

Signed-off-by: Avi Kivity <avi@redhat.com>
2010-08-01 10:46:57 +03:00
Avi Kivity
a1a005f36e KVM: Fix xsave and xcr save/restore memory leak
We allocate temporary kernel buffers for these structures, but never free them.

Signed-off-by: Avi Kivity <avi@redhat.com>
2010-08-01 10:46:56 +03:00
Wei Yongjun
7d5993d63f KVM: x86 emulator: fix group3 instruction decoding
Group 3 instruction with ModRM reg field as 001 is
defined as test instruction under AMD arch, and
emulate_grp3() is ready for emulate it, so fix the
decoding.

static inline int emulate_grp3(...)
{
	...
	switch (c->modrm_reg) {
	case 0 ... 1:   /* test */
		emulate_2op_SrcV("test", c->src, c->dst, ctxt->eflags);
	...
}

Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-08-01 10:46:55 +03:00
Chris Lalancette
e7dca5c0eb KVM: x86: Allow any LAPIC to accept PIC interrupts
If the guest wants to accept timer interrupts on a CPU other
than the BSP, we need to remove this gate.

Signed-off-by: Chris Lalancette <clalance@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-08-01 10:46:50 +03:00
Chris Lalancette
33572ac0ad KVM: x86: Introduce a workqueue to deliver PIT timer interrupts
We really want to "kvm_set_irq" during the hrtimer callback,
but that is risky because that is during interrupt context.
Instead, offload the work to a workqueue, which is a bit safer
and should provide most of the same functionality.

Signed-off-by: Chris Lalancette <clalance@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-08-01 10:46:49 +03:00
Wei Yongjun
c37eda1384 KVM: x86 emulator: fix pusha instruction emulation
emulate pusha instruction only writeback the last
EDI register, but the other registers which need
to be writeback is ignored. This patch fixed it.

Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-08-01 10:46:48 +03:00
Zachary Amsden
bd371396b3 KVM: x86: fix -DDEBUG oops
Fix a slight error with assertion in local APIC code.

Signed-off-by: Zachary Amsden <zamsden@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-08-01 10:46:46 +03:00
Xiao Guangrong
1047df1fb6 KVM: MMU: don't walk every parent pages while mark unsync
While we mark the parent's unsync_child_bitmap, if the parent is already
unsynced, it no need walk it's parent, it can reduce some unnecessary
workload

Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-08-01 10:46:45 +03:00
Xiao Guangrong
7a8f1a74e4 KVM: MMU: clear unsync_child_bitmap completely
In current code, some page's unsync_child_bitmap is not cleared completely
in mmu_sync_children(), for example, if two PDPEs shard one PDT, one of
PDPE's unsync_child_bitmap is not cleared.

Currently, it not harm anything just little overload, but it's the prepare
work for the later patch

Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-08-01 10:46:44 +03:00
Xiao Guangrong
ebdea638df KVM: MMU: cleanup for __mmu_unsync_walk()
Decrease sp->unsync_children after clear unsync_child_bitmap bit

Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-08-01 10:46:43 +03:00
Xiao Guangrong
be71e061d1 KVM: MMU: don't mark pte notrap if it's just sync transient
If the sync-sp just sync transient, don't mark its pte notrap

Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-08-01 10:46:42 +03:00
Xiao Guangrong
f918b44352 KVM: MMU: avoid double write protected in sync page path
The sync page is already write protected in mmu_sync_children(), don't
write protected it again

Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-08-01 10:46:41 +03:00
Xiao Guangrong
cb83cad2e7 KVM: MMU: cleanup for dirty page judgment
Using wrap function to cleanup page dirty judgment

Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-08-01 10:46:39 +03:00
Xiao Guangrong
ac3cd03cca KVM: MMU: rename 'page' and 'shadow_page' to 'sp'
Rename 'page' and 'shadow_page' to 'sp' to better fit the context

Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-08-01 10:46:38 +03:00
Sheng Yang
2d5b5a6655 KVM: x86: XSAVE/XRSTOR live migration support
This patch enable save/restore of xsave state.

Signed-off-by: Sheng Yang <sheng@linux.intel.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-08-01 10:46:37 +03:00
Avi Kivity
2390218b6a KVM: Fix mov cr3 #GP at wrong instruction
On Intel, we call skip_emulated_instruction() even if we injected a #GP,
resulting in the #GP pointing at the wrong address.

Fix by injecting the exception and skipping the instruction at the same place,
so we can do just one or the other.

Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-08-01 10:46:35 +03:00
Avi Kivity
a83b29c6ad KVM: Fix mov cr4 #GP at wrong instruction
On Intel, we call skip_emulated_instruction() even if we injected a #GP,
resulting in the #GP pointing at the wrong address.

Fix by injecting the exception and skipping the instruction at the same place,
so we can do just one or the other.

Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-08-01 10:46:34 +03:00
Avi Kivity
49a9b07edc KVM: Fix mov cr0 #GP at wrong instruction
On Intel, we call skip_emulated_instruction() even if we injected a #GP,
resulting in the #GP pointing at the wrong address.

Fix by injecting the exception and skipping the instruction at the same place,
so we can do just one or the other.

Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-08-01 10:46:32 +03:00
Dexuan Cui
2acf923e38 KVM: VMX: Enable XSAVE/XRSTOR for guest
This patch enable guest to use XSAVE/XRSTOR instructions.

We assume that host_xcr0 would use all possible bits that OS supported.

And we loaded xcr0 in the same way we handled fpu - do it as late as we can.

Signed-off-by: Dexuan Cui <dexuan.cui@intel.com>
Signed-off-by: Sheng Yang <sheng@linux.intel.com>
Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-08-01 10:46:31 +03:00
Avi Kivity
f495c6e5e8 KVM: VMX: Fix incorrect rcu deref in rmode_tss_base()
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-08-01 10:46:30 +03:00
Andi Kleen
a24e809902 KVM: Fix unused but set warnings
No real bugs in this one.

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-08-01 10:46:29 +03:00
Xiao Guangrong
3b5d132186 KVM: MMU: delay local tlb flush
delay local tlb flush until enter guest moden, it can reduce vpid flush
frequency and reduce remote tlb flush IPI(if KVM_REQ_TLB_FLUSH bit is
already set, IPI is not sent)

Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-08-01 10:46:26 +03:00
Xiao Guangrong
5304efde6a KVM: MMU: use wrapper function to flush local tlb
Use kvm_mmu_flush_tlb() function instead of calling
kvm_x86_ops->tlb_flush(vcpu) directly.

Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-08-01 10:46:25 +03:00
Xiao Guangrong
4f78fd08e9 KVM: MMU: remove unnecessary remote tlb flush
This remote tlb flush is no necessary since we have synced while
sp is zapped

Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-08-01 10:46:24 +03:00
Xiao Guangrong
4b9d3a0451 KVM: VMX: fix rcu usage warning in init_rmode()
fix:

[ INFO: suspicious rcu_dereference_check() usage. ]
---------------------------------------------------
include/linux/kvm_host.h:258 invoked rcu_dereference_check() without protection!

other info that might help us debug this:

rcu_scheduler_active = 1, debug_locks = 1
1 lock held by qemu-system-x86/3796:
 #0:  (&vcpu->mutex){+.+.+.}, at: [<ffffffffa0217fd8>] vcpu_load+0x1a/0x66 [kvm]

stack backtrace:
Pid: 3796, comm: qemu-system-x86 Not tainted 2.6.34 #25
Call Trace:
 [<ffffffff81070ed1>] lockdep_rcu_dereference+0x9d/0xa5
 [<ffffffffa0214fdf>] gfn_to_memslot_unaliased+0x65/0xa0 [kvm]
 [<ffffffffa0216139>] gfn_to_hva+0x22/0x4c [kvm]
 [<ffffffffa0216217>] kvm_write_guest_page+0x2a/0x7f [kvm]
 [<ffffffffa0216286>] kvm_clear_guest_page+0x1a/0x1c [kvm]
 [<ffffffffa0278239>] init_rmode+0x3b/0x180 [kvm_intel]
 [<ffffffffa02786ce>] vmx_set_cr0+0x350/0x4d3 [kvm_intel]
 [<ffffffffa02274ff>] kvm_arch_vcpu_ioctl_set_sregs+0x122/0x31a [kvm]
 [<ffffffffa021859c>] kvm_vcpu_ioctl+0x578/0xa3d [kvm]
 [<ffffffff8106624c>] ? cpu_clock+0x2d/0x40
 [<ffffffff810f7d86>] ? fget_light+0x244/0x28e
 [<ffffffff810709b9>] ? trace_hardirqs_off_caller+0x1f/0x10e
 [<ffffffff8110501b>] vfs_ioctl+0x32/0xa6
 [<ffffffff81105597>] do_vfs_ioctl+0x47f/0x4b8
 [<ffffffff813ae654>] ? sub_preempt_count+0xa3/0xb7
 [<ffffffff810f7da8>] ? fget_light+0x266/0x28e
 [<ffffffff810f7c53>] ? fget_light+0x111/0x28e
 [<ffffffff81105617>] sys_ioctl+0x47/0x6a
 [<ffffffff81002c1b>] system_call_fastpath+0x16/0x1b

Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-08-01 10:46:23 +03:00
Gui Jianfeng
1760dd4939 KVM: VMX: rename vpid_sync_vcpu_all() to vpid_sync_vcpu_single()
The name "pid_sync_vcpu_all" isn't appropriate since it just affect
a single vpid, so rename it to vpid_sync_vcpu_single().

Signed-off-by: Gui Jianfeng <guijianfeng@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-08-01 10:46:16 +03:00
Gui Jianfeng
b9d762fa79 KVM: VMX: Add all-context INVVPID type support
Add all-context INVVPID type support.

Signed-off-by: Gui Jianfeng <guijianfeng@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-08-01 10:46:04 +03:00
Xiao Guangrong
0671a8e75d KVM: MMU: reduce remote tlb flush in kvm_mmu_pte_write()
collect remote tlb flush in kvm_mmu_pte_write() path

Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-08-01 10:39:28 +03:00
Xiao Guangrong
f41d335a02 KVM: MMU: traverse sp hlish safely
Now, we can safely to traverse sp hlish

Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-08-01 10:39:28 +03:00
Xiao Guangrong
d98ba05365 KVM: MMU: gather remote tlb flush which occurs during page zapped
Using kvm_mmu_prepare_zap_page() and kvm_mmu_zap_page() instead of
kvm_mmu_zap_page() that can reduce remote tlb flush IPI

Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-08-01 10:39:27 +03:00
Xiao Guangrong
103ad25a86 KVM: MMU: don't get free page number in the loop
In the later patch, we will modify sp's zapping way like below:

	kvm_mmu_prepare_zap_page A
	kvm_mmu_prepare_zap_page B
	kvm_mmu_prepare_zap_page C
	....
	kvm_mmu_commit_zap_page

[ zaped multiple sps only need to call kvm_mmu_commit_zap_page once ]

In __kvm_mmu_free_some_pages() function, the free page number is
getted form 'vcpu->kvm->arch.n_free_mmu_pages' in loop, it will
hinders us to apply kvm_mmu_prepare_zap_page() and kvm_mmu_commit_zap_page()
since kvm_mmu_prepare_zap_page() not free sp.

Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-08-01 10:39:27 +03:00
Xiao Guangrong
7775834a23 KVM: MMU: split the operations of kvm_mmu_zap_page()
Using kvm_mmu_prepare_zap_page() and kvm_mmu_commit_zap_page() to
split kvm_mmu_zap_page() function, then we can:

- traverse hlist safely
- easily to gather remote tlb flush which occurs during page zapped

Those feature can be used in the later patches

Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2010-08-01 10:39:27 +03:00