The auxtrace init variable 'err' was not being initialized, leading perf
to abort early in an SPE record command when there was no explicit
error, rather only based whatever memory contents were on the stack.
Initialize it explicitly on getting an SPE successfully, the same way
cs-etm does.
Signed-off-by: Kim Phillips <kim.phillips@arm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Dongjiu Geng <gengdongjiu@huawei.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Fixes: ffd3d18c20 ("perf tools: Add ARM Statistical Profiling Extensions (SPE) support")
Link: http://lkml.kernel.org/r/20180810174512.52900813e57cbccf18ce99a2@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Probably leftover from the time we introducd the check-headers.sh script.
Committer testing:
Remove the 'rseq' syscall from tools/perf/arch/x86/entry/syscalls/syscall_64.tbl
to fake a diff:
make: Entering directory '/home/acme/git/perf/tools/perf'
BUILD: Doing 'make -j4' parallel build
Warning: Kernel ABI header at 'tools/perf/arch/x86/entry/syscalls/syscall_64.tbl' differs from latest version at 'arch/x86/entry/syscalls/syscall_64.tbl'
diff -u tools/perf/arch/x86/entry/syscalls/syscall_64.tbl arch/x86/entry/syscalls/syscall_64.tbl
CC /tmp/build/perf/util/syscalltbl.o
INSTALL trace_plugins
<SNIP>
$ diff -u tools/perf/arch/x86/entry/syscalls/syscall_64.tbl arch/x86/entry/syscalls/syscall_64.tbl
--- tools/perf/arch/x86/entry/syscalls/syscall_64.tbl 2018-08-13 15:49:50.896585176 -0300
+++ arch/x86/entry/syscalls/syscall_64.tbl 2018-07-20 12:04:04.536858304 -0300
@@ -342,6 +342,7 @@
331 common pkey_free __x64_sys_pkey_free
332 common statx __x64_sys_statx
333 common io_pgetevents __x64_sys_io_pgetevents
+334 common rseq __x64_sys_rseq
#
# x32-specific system call numbers start at 512 to avoid cache impact
$
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Kapshuk <alexander.kapshuk@gmail.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180813111504.3568-2-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Changing the logic to compare files with paths relative to kernel source
base dir. This way we can keep the output message for 2 unrelated files,
which is coming in following patch.
Committer testing:
Remove a line from tools/arch/x86/lib/memcpy_64.S to have it detected:
make: Entering directory '/home/acme/git/perf/tools/perf'
BUILD: Doing 'make -j4' parallel build
Warning: Kernel ABI header at 'tools/arch/x86/lib/memcpy_64.S' differs from latest version at 'arch/x86/lib/memcpy_64.S'
diff -u tools/arch/x86/lib/memcpy_64.S arch/x86/lib/memcpy_64.S
INSTALL GTK UI
INSTALL binaries
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Kapshuk <alexander.kapshuk@gmail.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180813111504.3568-1-jolsa@kernel.org
Link: http://lkml.kernel.org/r/20180814072726.GA13931@krava
[ Do not use pushd/popd, its a bashism, reported by Michael Ellerman, fixed by Jiri Olsa ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The '||' path of execution in the 'test' block of the check_2() function
may also be taken if file2 does not exist, in which case the warning
message about the ABI headers being different would still be printed
where it should not be. See below.
% file1=file1; file2=file2
% cmd="echo diff $file1 $file2"
% test -f $file2 && \
eval $cmd || echo "Warning: Kernel ABI header at 'tools/$file1'
differs from latest version at '$file2'" >&2
Warning: Kernel ABI header at 'tools/file1' differs from latest
version at 'file2'
The proposed patch converts the code following the '&&' operator into a
compound list to be executed in the current process environment only if file2
does exist. Should the files being compared differ, a diff command to compare
the files concerned is printed on standard output. E.g.
$ diff -u tools/arch/x86/lib/memcpy_64.S arch/x86/lib/memcpy_64.S
Committer testing:
Remove a line from that tools/arch/x86/lib/memcpy_64.S file to test
this:
BUILD: Doing 'make -j4' parallel build
Warning: Kernel ABI header at 'tools/arch/x86/lib/memcpy_64.S' differs from latest version at 'arch/x86/lib/memcpy_64.S'
diff -u tools/arch/x86/lib/memcpy_64.S arch/x86/lib/memcpy_64.S
CC /tmp/build/perf/bench/mem-memcpy-x86-64-asm.o
Signed-off-by: Alexander Kapshuk <alexander.kapshuk@gmail.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180811083915.17471-1-alexander.kapshuk@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The argument to nsinfo__copy() was assumed to be valid, but some code paths
exist that will lead to NULL being passed.
In particular, running 'perf script -D' on a perf.data file containing an
PERF_RECORD_MMAP event associating the '[vdso]' dso with pid 0 earlier in
the event stream will lead to a segfault.
Since all calling code is already checking for a non-null return value,
just return NULL for this case as well.
Signed-off-by: Benno Evers <bevers@mesosphere.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Krister Johansen <kjlx@templeofstupid.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180810133614.9925-1-bevers@mesosphere.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In order to make libtraceevent into a proper library, variables, data
structures and functions require a unique prefix to prevent name space
conflicts. That prefix will be "tep_" and not "pevent_". This changes
static variables and functions in event-parse.c: pevent_func_params,
__pevent_parse_format, __pevent_parse_event, pevent_error_str, pevent_search_event
Signed-off-by: Tzvetomir Stoyanov (VMware) <tz.stoyanov@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Yordan Karadzhov (VMware) <y.karadz@gmail.com>
Cc: linux-trace-devel@vger.kernel.org
Link: http://lkml.kernel.org/r/20180808180703.575392642@goodmis.org
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In order to make libtraceevent into a proper library, variables, data
structures and functions require a unique prefix to prevent name space
conflicts. That prefix will be "tep_" and not "pevent_". This changes
APIs: pevent_reset_function_resolver, pevent_strerror, pevent_list_events,
pevent_event_common_fields, pevent_event_fields, pevent_ref, pevent_unref
Signed-off-by: Tzvetomir Stoyanov (VMware) <tz.stoyanov@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Yordan Karadzhov (VMware) <y.karadz@gmail.com>
Cc: linux-trace-devel@vger.kernel.org
Link: http://lkml.kernel.org/r/20180808180703.426198047@goodmis.org
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In order to make libtraceevent into a proper library, variables, data
structures and functions require a unique prefix to prevent name space
conflicts. That prefix will be "tep_" and not "pevent_". This changes
APIs: pevent_buffer_init, pevent_read_token, pevent_free_token,
pevent_peek_char, pevent_get_input_buf, pevent_get_input_buf_ptr
Signed-off-by: Tzvetomir Stoyanov (VMware) <tz.stoyanov@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Yordan Karadzhov (VMware) <y.karadz@gmail.com>
Cc: linux-trace-devel@vger.kernel.org
Link: http://lkml.kernel.org/r/20180808180703.275281085@goodmis.org
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In order to make libtraceevent into a proper library, variables, data
structures and functions require a unique prefix to prevent name space
conflicts. That prefix will be "tep_" and not "pevent_". This changes
APIs: pevent_pid_is_registered, pevent_get_cpus, pevent_set_cpus,
pevent_is_file_bigendian, pevent_is_host_bigendian, pevent_is_latency_format,
pevent_set_latency_format
Signed-off-by: Tzvetomir Stoyanov (VMware) <tz.stoyanov@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Yordan Karadzhov (VMware) <y.karadz@gmail.com>
Cc: linux-trace-devel@vger.kernel.org
Link: http://lkml.kernel.org/r/20180808180703.114110715@goodmis.org
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In order to make libtraceevent into a proper library, variables, data
structures and functions require a unique prefix to prevent name space
conflicts. That prefix will be "tep_" and not "pevent_". This changes
APIs: pevent_find_function, pevent_find_function_address,
pevent_find_event_by_name, pevent_find_event_by_record
Signed-off-by: Tzvetomir Stoyanov (VMware) <tz.stoyanov@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Yordan Karadzhov (VMware) <y.karadz@gmail.com>
Cc: linux-trace-devel@vger.kernel.org
Link: http://lkml.kernel.org/r/20180808180702.966965051@goodmis.org
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In order to make libtraceevent into a proper library, variables, data
structures and functions require a unique prefix to prevent name space
conflicts. That prefix will be "tep_" and not "pevent_". This changes
APIs: pevent_free_format, pevent_free_format_field, pevent_get_field_raw,
pevent_get_field_val, pevent_get_common_field_val, pevent_get_any_field_val
Signed-off-by: Tzvetomir Stoyanov (VMware) <tz.stoyanov@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Yordan Karadzhov (VMware) <y.karadz@gmail.com>
Cc: linux-trace-devel@vger.kernel.org
Link: http://lkml.kernel.org/r/20180808180702.821244942@goodmis.org
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In order to make libtraceevent into a proper library, variables, data
structures and functions require a unique prefix to prevent name space
conflicts. That prefix will be "tep_" and not "pevent_". This changes
APIs: pevent_data_lat_fmt, pevent_data_type, pevent_data_event_from_type,
pevent_data_pid, pevent_data_preempt_count, pevent_data_flags,
pevent_data_comm_from_pid, pevent_data_pid_from_comm, pevent_cmdline_pid
Signed-off-by: Tzvetomir Stoyanov (VMware) <tz.stoyanov@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Yordan Karadzhov (VMware) <y.karadz@gmail.com>
Cc: linux-trace-devel@vger.kernel.org
Link: http://lkml.kernel.org/r/20180808180702.678020020@goodmis.org
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In order to make libtraceevent into a proper library, variables, data
structures and functions require a unique prefix to prevent name space
conflicts. That prefix will be "tep_" and not "pevent_". This changes
APIs: pevent_register_print_function, pevent_unregister_print_function,
pevent_register_event_handler, pevent_unregister_event_handler,
pevent_register_function, pevent_register_trace_clock
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Yordan Karadzhov (VMware) <y.karadz@gmail.com>
Cc: linux-trace-devel@vger.kernel.org
Link: http://lkml.kernel.org/r/20180808180702.524813185@goodmis.org
Signed-off-by: Tzvetomir Stoyanov (VMware) <tz.stoyanov@gmail.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In order to make libtraceevent into a proper library, variables, data
structures and functions require a unique prefix to prevent name space
conflicts. That prefix will be "tep_" and not "pevent_". This changes
APIs: PEVENT_FILTER_ERROR_BUFSZ, pevent_filter_alloc,
pevent_filter_add_filter_str, pevent_filter_match, pevent_filter_strerror,
pevent_event_filtered, pevent_filter_reset, pevent_filter_clear_trivial,
pevent_filter_free, pevent_filter_make_string, pevent_filter_remove_event,
pevent_filter_event_has_trivial, pevent_filter_copy, pevent_update_trivial,
pevent_filter_compare
Signed-off-by: Tzvetomir Stoyanov (VMware) <tz.stoyanov@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Yordan Karadzhov (VMware) <y.karadz@gmail.com>
Cc: linux-trace-devel@vger.kernel.org
Link: http://lkml.kernel.org/r/20180808180702.370659353@goodmis.org
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In order to make libtraceevent into a proper library, variables, data
structures and functions require a unique prefix to prevent name space
conflicts. That prefix will be "tep_" and not "traceevent_". This changes
APIs: traceevent_plugin_list_options, traceevent_plugin_free_options_list,
traceevent_plugin_add_options, traceevent_plugin_remove_options,
traceevent_print_plugins
Signed-off-by: Tzvetomir Stoyanov (VMware) <tz.stoyanov@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Yordan Karadzhov (VMware) <y.karadz@gmail.com>
Cc: linux-trace-devel@vger.kernel.org
Link: http://lkml.kernel.org/r/20180808180702.089951638@goodmis.org
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In order to make libtraceevent into a proper library, variables, data
structures and functions require a unique prefix to prevent name space
conflicts. That prefix will be "tep_" and not "pevent_". This changes
APIs: pevent_function_handler, pevent_func_handler,
pevent_func_arg_type, PEVENT_FUNC_ARG_VOID, PEVENT_FUNC_ARG_INT,
PEVENT_FUNC_ARG_LONG, PEVENT_FUNC_ARG_STRING, PEVENT_FUNC_ARG_PTRS,
PEVENT_FUNC_ARG_MAX_TYPES
Signed-off-by: Tzvetomir Stoyanov (VMware) <tz.stoyanov@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Yordan Karadzhov (VMware) <y.karadz@gmail.com>
Cc: linux-trace-devel@vger.kernel.org
Link: http://lkml.kernel.org/r/20180808180701.935881193@goodmis.org
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In order to make libtraceevent into a proper library, variables, data
structures and functions require a unique prefix to prevent name space
conflicts. That prefix will be "tep_" and not "pevent_". This changes
'enum pevent_errno' to 'enum tep_errno'.
Signed-off-by: Tzvetomir Stoyanov (VMware) <tz.stoyanov@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Yordan Karadzhov (VMware) <y.karadz@gmail.com>
Cc: linux-trace-devel@vger.kernel.org
Link: http://lkml.kernel.org/r/20180808180701.770475059@goodmis.org
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In order to make libtraceevent into a proper library, variables, data
structures and functions require a unique prefix to prevent name space
conflicts. That prefix will be "tep_" and not "pevent_". This changes
pevent_get_page_size API and enum pevent_flag to enum tep_flag
Signed-off-by: Tzvetomir Stoyanov (VMware) <tz.stoyanov@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Yordan Karadzhov (VMware) <y.karadz@gmail.com>
Cc: linux-trace-devel@vger.kernel.org
Link: http://lkml.kernel.org/r/20180808180701.623942406@goodmis.org
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In order to make libtraceevent into a proper library, variables, data
structures and functions require a unique prefix to prevent name space
conflicts. That prefix will be "tep_" and not "traceevent_". This
changes APIs: traceevent_host_bigendian, traceevent_load_plugins and
traceevent_unload_plugins
Signed-off-by: Tzvetomir Stoyanov (VMware) <tz.stoyanov@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Yordan Karadzhov (VMware) <y.karadz@gmail.com>
Cc: linux-trace-devel@vger.kernel.org
Link: http://lkml.kernel.org/r/20180808180701.484691639@goodmis.org
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In order to make libtraceevent into a proper library, variables, data
structures and functions require a unique prefix to prevent name space
conflicts. That prefix will be "tep_" and not "pevent_". This changes
APIs: pevent_set_file_bigendian, pevent_set_flag,
pevent_set_function_resolver, pevent_set_host_bigendian,
pevent_set_long_size, pevent_set_page_size and pevent_get_long_size
Signed-off-by: Tzvetomir Stoyanov (VMware) <tz.stoyanov@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Yordan Karadzhov (VMware) <y.karadz@gmail.com>
Cc: linux-trace-devel@vger.kernel.org
Link: http://lkml.kernel.org/r/20180808180701.256265951@goodmis.org
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In order to make libtraceevent into a proper library, variables, data
structures and functions require a unique prefix to prevent name space
conflicts. That prefix will be "tep_" and not "pevent_". This changes
APIs: pevent_register_comm, pevent_register_print_string
Signed-off-by: Tzvetomir Stoyanov (VMware) <tz.stoyanov@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Yordan Karadzhov (VMware) <y.karadz@gmail.com>
Cc: linux-trace-devel@vger.kernel.org
Link: http://lkml.kernel.org/r/20180808180700.948980691@goodmis.org
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In order to make libtraceevent into a proper library, variables, data
structures and functions require a unique prefix to prevent name space
conflicts. That prefix will be "tep_" and not "pevent_". This changes
APIs: pevent_read_number, pevent_read_number_field
Signed-off-by: Tzvetomir Stoyanov (VMware) <tz.stoyanov@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Yordan Karadzhov (VMware) <y.karadz@gmail.com>
Cc: linux-trace-devel@vger.kernel.org
Link: http://lkml.kernel.org/r/20180808180700.804271434@goodmis.org
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In order to make libtraceevent into a proper library, variables, data
structures and functions require a unique prefix to prevent name space
conflicts. That prefix will be "tep_" and not "pevent_". This changes
APIs: pevent_print_field, pevent_print_fields, pevent_print_funcs,
pevent_print_printk
Signed-off-by: Tzvetomir Stoyanov (VMware) <tz.stoyanov@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Yordan Karadzhov (VMware) <y.karadz@gmail.com>
Cc: linux-trace-devel@vger.kernel.org
Link: http://lkml.kernel.org/r/20180808180700.654453763@goodmis.org
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In order to make libtraceevent into a proper library, variables, data
structures and functions require a unique prefix to prevent name space
conflicts. That prefix will be "tep_" and not "pevent_". This changes
APIs: pevent_parse_event, pevent_parse_format, pevent_parse_header_page
Signed-off-by: Tzvetomir Stoyanov (VMware) <tz.stoyanov@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Yordan Karadzhov (VMware) <y.karadz@gmail.com>
Cc: linux-trace-devel@vger.kernel.org
Link: http://lkml.kernel.org/r/20180808180700.469749700@goodmis.org
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In order to make libtraceevent into a proper library, variables, data
structures and functions require a unique prefix to prevent name space
conflicts. That prefix will be "tep_" and not "pevent_". This changes
APIs: pevent_find_any_field, pevent_find_common_field,
pevent_find_event, pevent_find_field
Signed-off-by: Tzvetomir Stoyanov (VMware) <tz.stoyanov@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Yordan Karadzhov (VMware) <y.karadz@gmail.com>
Cc: linux-trace-devel@vger.kernel.org
Link: http://lkml.kernel.org/r/20180808180700.316995920@goodmis.org
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In order to make libtraceevent into a proper library, variables, data
structures and functions require a unique prefix to prevent name space
conflicts. That prefix will be "tep_" and not "pevent_". This changes
APIs: pevent_alloc, pevent_free, pevent_event_info and pevent_func_resolver_t
Signed-off-by: Tzvetomir Stoyanov (VMware) <tz.stoyanov@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Yordan Karadzhov (VMware) <y.karadz@gmail.com>
Cc: linux-trace-devel@vger.kernel.org
Link: http://lkml.kernel.org/r/20180808180700.152609945@goodmis.org
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In order to make libtraceevent into a proper library, variables, data
structures and functions require a unique prefix to prevent name space
conflicts. That prefix will be "tep_" and not "pevent_". This changes
the pevent plugin related API.
Signed-off-by: Tzvetomir Stoyanov (VMware) <tz.stoyanov@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Yordan Karadzhov (VMware) <y.karadz@gmail.com>
Cc: linux-trace-devel@vger.kernel.org
Link: http://lkml.kernel.org/r/20180808180700.005287044@goodmis.org
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In order to make libtraceevent into a proper library, variables, data
structures and functions require a unique prefix to prevent name space
conflicts. That prefix will be "tep_" and not "pevent_". This changes
the 'struct pevent_record' to 'struct tep_record'.
Signed-off-by: Tzvetomir Stoyanov (VMware) <tz.stoyanov@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Yordan Karadzhov (VMware) <y.karadz@gmail.com>
Cc: linux-trace-devel@vger.kernel.org
Link: http://lkml.kernel.org/r/20180808180659.866021298@goodmis.org
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In order to make libtraceevent into a proper library, variables, data
structures and functions require a unique prefix to prevent name space
conflicts. That prefix will be "tep_" and not "pevent_". This changes
the struct pevent to struct tep_handle.
Signed-off-by: Tzvetomir Stoyanov (VMware) <tz.stoyanov@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Yordan Karadzhov (VMware) <y.karadz@gmail.com>
Cc: linux-trace-devel@vger.kernel.org
Link: http://lkml.kernel.org/r/20180808180659.706175783@goodmis.org
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In some cases, a symbol may have multiple aliases. Attempting to add an
entry probe for such symbols results in a probe being added at an
incorrect location while it fails altogether for return probes. This is
only applicable for binaries with debug information.
During the arch-dependent post-processing, the offset from the start of
the symbol at which the probe is to be attached is determined and added
to the start address of the symbol to get the probe's location. In case
there are multiple aliases, this offset gets added multiple times for
each alias of the symbol and we end up with an incorrect probe location.
This can be verified on a powerpc64le system as shown below.
$ nm /lib/modules/$(uname -r)/build/vmlinux | grep "sys_open$"
...
c000000000414290 T __se_sys_open
c000000000414290 T sys_open
$ objdump -d /lib/modules/$(uname -r)/build/vmlinux | grep -A 10 "<__se_sys_open>:"
c000000000414290 <__se_sys_open>:
c000000000414290: 19 01 4c 3c addis r2,r12,281
c000000000414294: 70 c4 42 38 addi r2,r2,-15248
c000000000414298: a6 02 08 7c mflr r0
c00000000041429c: e8 ff a1 fb std r29,-24(r1)
c0000000004142a0: f0 ff c1 fb std r30,-16(r1)
c0000000004142a4: f8 ff e1 fb std r31,-8(r1)
c0000000004142a8: 10 00 01 f8 std r0,16(r1)
c0000000004142ac: c1 ff 21 f8 stdu r1,-64(r1)
c0000000004142b0: 78 23 9f 7c mr r31,r4
c0000000004142b4: 78 1b 7e 7c mr r30,r3
For both the entry probe and the return probe, the probe location
should be _text+4276888 (0xc000000000414298). Since another alias
exists for 'sys_open', the post-processing code will end up adding
the offset (8 for powerpc64le) twice and perf will attempt to add
the probe at _text+4276896 (0xc0000000004142a0) instead.
Before:
# perf probe -v -a sys_open
probe-definition(0): sys_open
symbol:sys_open file:(null) line:0 offset:0 return:0 lazy:(null)
0 arguments
Looking at the vmlinux_path (8 entries long)
Using /lib/modules/4.18.0-rc8+/build/vmlinux for symbols
Open Debuginfo file: /lib/modules/4.18.0-rc8+/build/vmlinux
Try to find probe point from debuginfo.
Symbol sys_open address found : c000000000414290
Matched function: __se_sys_open [2ad03a0]
Probe point found: __se_sys_open+0
Found 1 probe_trace_events.
Opening /sys/kernel/debug/tracing/kprobe_events write=1
Writing event: p:probe/sys_open _text+4276896
Added new event:
probe:sys_open (on sys_open)
...
# perf probe -v -a sys_open%return $retval
probe-definition(0): sys_open%return
symbol:sys_open file:(null) line:0 offset:0 return:1 lazy:(null)
0 arguments
Looking at the vmlinux_path (8 entries long)
Using /lib/modules/4.18.0-rc8+/build/vmlinux for symbols
Open Debuginfo file: /lib/modules/4.18.0-rc8+/build/vmlinux
Try to find probe point from debuginfo.
Symbol sys_open address found : c000000000414290
Matched function: __se_sys_open [2ad03a0]
Probe point found: __se_sys_open+0
Found 1 probe_trace_events.
Opening /sys/kernel/debug/tracing/README write=0
Opening /sys/kernel/debug/tracing/kprobe_events write=1
Parsing probe_events: p:probe/sys_open _text+4276896
Group:probe Event:sys_open probe:p
Writing event: r:probe/sys_open__return _text+4276896
Failed to write event: Invalid argument
Error: Failed to add events. Reason: Invalid argument (Code: -22)
After:
# perf probe -v -a sys_open
probe-definition(0): sys_open
symbol:sys_open file:(null) line:0 offset:0 return:0 lazy:(null)
0 arguments
Looking at the vmlinux_path (8 entries long)
Using /lib/modules/4.18.0-rc8+/build/vmlinux for symbols
Open Debuginfo file: /lib/modules/4.18.0-rc8+/build/vmlinux
Try to find probe point from debuginfo.
Symbol sys_open address found : c000000000414290
Matched function: __se_sys_open [2ad03a0]
Probe point found: __se_sys_open+0
Found 1 probe_trace_events.
Opening /sys/kernel/debug/tracing/kprobe_events write=1
Writing event: p:probe/sys_open _text+4276888
Added new event:
probe:sys_open (on sys_open)
...
# perf probe -v -a sys_open%return $retval
probe-definition(0): sys_open%return
symbol:sys_open file:(null) line:0 offset:0 return:1 lazy:(null)
0 arguments
Looking at the vmlinux_path (8 entries long)
Using /lib/modules/4.18.0-rc8+/build/vmlinux for symbols
Open Debuginfo file: /lib/modules/4.18.0-rc8+/build/vmlinux
Try to find probe point from debuginfo.
Symbol sys_open address found : c000000000414290
Matched function: __se_sys_open [2ad03a0]
Probe point found: __se_sys_open+0
Found 1 probe_trace_events.
Opening /sys/kernel/debug/tracing/README write=0
Opening /sys/kernel/debug/tracing/kprobe_events write=1
Parsing probe_events: p:probe/sys_open _text+4276888
Group:probe Event:sys_open probe:p
Writing event: r:probe/sys_open__return _text+4276888
Added new event:
probe:sys_open__return (on sys_open%return)
...
Reported-by: Aneesh Kumar <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Sandipan Das <sandipan@linux.ibm.com>
Acked-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Aneesh Kumar <aneesh.kumar@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Fixes: 99e608b595 ("perf probe ppc64le: Fix probe location when using DWARF")
Link: http://lkml.kernel.org/r/20180809161929.35058-1-sandipan@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This function splits and removes overlapping areas.
Maps in tree are ordered by start address thus we could find first
overlap and stop if next map does not overlap.
Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/153365189407.435244.7234821822450484712.stgit@buzz
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Threads share map_groups, all map events are merged into it.
Thus we could send mmaps only for thread group leader. Otherwise it
took ages to attach and record something from processes with many vmas
and threads.
Thread group leader could be already dead, but it seems perf cannot
handle this case anyway.
Testing dummy:
#include <stdio.h>
#include <stdlib.h>
#include <sys/mman.h>
#include <pthread.h>
#include <unistd.h>
void *thread(void *arg) {
pause();
}
int main(int argc, char **argv) {
int threads = 10000;
int vmas = 50000;
pthread_t th;
for (int i = 0; i < threads; i++)
pthread_create(&th, NULL, thread, NULL);
for (int i = 0; i < vmas; i++)
mmap(NULL, 4096, (i & 1) ? PROT_READ : PROT_WRITE,
MAP_PRIVATE | MAP_ANONYMOUS | MAP_NORESERVE, -1, 0);
sleep(60);
return 0;
}
Comment by Jiri Olsa:
We actualy synthesize the group leader (if we found one) for the thread
even if it's not present in the thread_map, so the process maps are
always in data.
Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/153363294102.396323.6277944760215058174.stgit@buzz
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We just check that the evsel is the one we associated with the
bpf-output event associated with the "__augmented_syscalls__" eBPF map,
to show that the formatting is done properly:
# perf trace -e perf/tools/perf/examples/bpf/augmented_syscalls.c,openat cat /etc/passwd > /dev/null
0.000 ( ): __augmented_syscalls__:dfd: CWD, filename: 0x43e06da8, flags: CLOEXEC
0.006 ( ): syscalls:sys_enter_openat:dfd: CWD, filename: 0x43e06da8, flags: CLOEXEC
0.007 ( 0.004 ms): cat/11486 openat(dfd: CWD, filename: 0x43e06da8, flags: CLOEXEC ) = 3
0.029 ( ): __augmented_syscalls__:dfd: CWD, filename: 0x4400ece0, flags: CLOEXEC
0.030 ( ): syscalls:sys_enter_openat:dfd: CWD, filename: 0x4400ece0, flags: CLOEXEC
0.031 ( 0.004 ms): cat/11486 openat(dfd: CWD, filename: 0x4400ece0, flags: CLOEXEC ) = 3
0.249 ( ): __augmented_syscalls__:dfd: CWD, filename: 0xc3700d6
0.250 ( ): syscalls:sys_enter_openat:dfd: CWD, filename: 0xc3700d6
0.252 ( 0.003 ms): cat/11486 openat(dfd: CWD, filename: 0xc3700d6 ) = 3
#
Now we just need to get the full blown enter/exit handlers to check if the
evsel being processed is the augmented_syscalls one to go pick the pointer
payloads from the end of the payload.
We also need to state somehow what is the layout for multi pointer arg syscalls.
Also handy would be to have a BTF file with the struct definitions used in
syscalls, compact, generated at kernel built time and available for use in eBPF
programs.
Till we get there we can go on doing some manual coupling of the most relevant
syscalls with some hand built beautifiers.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-r6ba5izrml82nwfmwcp7jpkm@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The payload that is put in place by the eBPF script attached to
syscalls:sys_enter_openat (and other syscalls with pointers, in the
future) can be consumed by the existing sys_enter beautifiers if
evsel->priv is setup with a struct syscall_tp with struct tp_fields for
the 'syscall_id' and 'args' fields expected by the beautifiers, this
patch does just that.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-xfjyog8oveg2fjys9r1yy1es@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We're calling it to setup that event, and we'll need it later to decide
if the bpf-output event we're handling is the one setup for a specific
purpose, return it using ERR_PTR, etc.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-zhachv7il2n1lopt9aonwhu7@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add an example BPF script that writes syscalls:sys_enter_openat raw
tracepoint payloads augmented with the first 64 bytes of the "filename"
syscall pointer arg.
Then catch it and print it just like with things written to the
"__bpf_stdout__" map associated with a PERF_COUNT_SW_BPF_OUTPUT software
event, by just letting the default tracepoint handler in 'perf trace',
trace__event_handler(), to use bpf_output__fprintf(trace, sample), just
like it does with all other PERF_COUNT_SW_BPF_OUTPUT events, i.e. just
do a dump on the payload, so that we can check if what is being printed
has at least the first 64 bytes of the "filename" arg:
The augmented_syscalls.c eBPF script:
# cat tools/perf/examples/bpf/augmented_syscalls.c
// SPDX-License-Identifier: GPL-2.0
#include <stdio.h>
struct bpf_map SEC("maps") __augmented_syscalls__ = {
.type = BPF_MAP_TYPE_PERF_EVENT_ARRAY,
.key_size = sizeof(int),
.value_size = sizeof(u32),
.max_entries = __NR_CPUS__,
};
struct syscall_enter_openat_args {
unsigned long long common_tp_fields;
long syscall_nr;
long dfd;
char *filename_ptr;
long flags;
long mode;
};
struct augmented_enter_openat_args {
struct syscall_enter_openat_args args;
char filename[64];
};
int syscall_enter(openat)(struct syscall_enter_openat_args *args)
{
struct augmented_enter_openat_args augmented_args;
probe_read(&augmented_args.args, sizeof(augmented_args.args), args);
probe_read_str(&augmented_args.filename, sizeof(augmented_args.filename), args->filename_ptr);
perf_event_output(args, &__augmented_syscalls__, BPF_F_CURRENT_CPU,
&augmented_args, sizeof(augmented_args));
return 1;
}
license(GPL);
#
So it will just prepare a raw_syscalls:sys_enter payload for the
"openat" syscall.
This will eventually be done for all syscalls with pointer args,
globally or just when the user asks, using some spec, which args of
which syscalls it wants "expanded" this way, we'll probably start with
just all the syscalls that have char * pointers with familiar names, the
ones we already handle with the probe:vfs_getname kprobe if it is in
place hooking the kernel getname_flags() function used to copy from user
the paths.
Running it we get:
# perf trace -e perf/tools/perf/examples/bpf/augmented_syscalls.c,openat cat /etc/passwd > /dev/null
0.000 ( ): __augmented_syscalls__:X?.C......................`\..................../etc/ld.so.cache..#......,....ao.k...............k......1.".........
0.006 ( ): syscalls:sys_enter_openat:dfd: CWD, filename: 0x5c600da8, flags: CLOEXEC
0.008 ( 0.005 ms): cat/31292 openat(dfd: CWD, filename: 0x5c600da8, flags: CLOEXEC ) = 3
0.036 ( ): __augmented_syscalls__:X?.C.......................\..................../lib64/libc.so.6......... .\....#........?.......=.C..../.".........
0.037 ( ): syscalls:sys_enter_openat:dfd: CWD, filename: 0x5c808ce0, flags: CLOEXEC
0.039 ( 0.007 ms): cat/31292 openat(dfd: CWD, filename: 0x5c808ce0, flags: CLOEXEC ) = 3
0.323 ( ): __augmented_syscalls__:X?.C.....................P....................../etc/passwd......>.C....@................>.C.....,....ao.>.C........
0.325 ( ): syscalls:sys_enter_openat:dfd: CWD, filename: 0xe8be50d6
0.327 ( 0.004 ms): cat/31292 openat(dfd: CWD, filename: 0xe8be50d6 ) = 3
#
We need to go on optimizing this to avoid seding trash or zeroes in the
pointer content payload, using the return from bpf_probe_read_str(), but
to keep things simple at this stage and make incremental progress, lets
leave it at that for now.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-g360n1zbj6bkbk6q0qo11c28@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Will be used shortly in the augmented syscalls work together with a
PERF_COUNT_SW_BPF_OUTPUT software event to insert syscalls + pointer
contents in the perf ring buffer, to be consumed by 'perf trace'
beautifiers.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-ajlkpz4cd688ulx1u30htkj3@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
That is just bpf__strerror_setup_stdout() renamed to the more general
"setup_output_event" method, keep the existing stdout() as a wrapper.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-nwnveo428qn0b48axj50vkc7@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We will use it to set up other bpf-output events, for instance to
generate augmented syscall entry tracepoints with pointer contents.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-4r7kw0nsyi4vyz6xm1tzx6a3@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
By passing a 'name' arg, that will eventually be used to setup more
"bpf-output" events, e.g. to create a event where to create raw_syscalls
like events that in addition to the syscall arguments will also copy the
pointer contents being passed from/to userspace.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-talrnxps9p3qozk3aeh91fgv@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
That, together with the map __bpf_output__ that is already handled by
'perf trace' to print that event's contents as strings provides a
debugging facility, to show it in use, print a simple string everytime
the syscalls:sys_enter_openat() syscall tracepoint is hit:
# cat tools/perf/examples/bpf/hello.c
#include <stdio.h>
int syscall_enter(openat)(void *args)
{
puts("Hello, world\n");
return 0;
}
license(GPL);
#
# perf trace -e openat,tools/perf/examples/bpf/hello.c cat /etc/passwd > /dev/null
0.016 ( ): __bpf_stdout__:Hello, world
0.018 ( 0.010 ms): cat/9079 openat(dfd: CWD, filename: /etc/ld.so.cache, flags: CLOEXEC) = 3
0.057 ( ): __bpf_stdout__:Hello, world
0.059 ( 0.011 ms): cat/9079 openat(dfd: CWD, filename: /lib64/libc.so.6, flags: CLOEXEC) = 3
0.417 ( ): __bpf_stdout__:Hello, world
0.419 ( 0.009 ms): cat/9079 openat(dfd: CWD, filename: /etc/passwd) = 3
#
This is part of an ongoing experimentation on making eBPF scripts as
consumed by perf to be as concise as possible and using familiar
concepts such as stdio.h functions, that end up just wrapping the
existing BPF functions, trying to hide as much boilerplate as possible
while using just conventions and C preprocessor tricks.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-4tiaqlx5crf0fwpe7a6j84x7@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Set annotation percent type from following choices:
global-period, local-period, global-hits, local-hits
With following report option setup the percent type will be passed to
annotation browser:
$ perf report --percent-type period-local
The local/global keywords set if the percentage is computed in the scope
of the function (local) or the whole data (global). The period/hits
keywords set the base the percentage is computed on - the samples period
or the number of samples (hits).
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/20180804130521.11408-21-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add --percent-type option to set annotation percent type from following
choices:
global-period, local-period, global-hits, local-hits
Examples:
$ perf annotate --percent-type period-local --stdio | head -1
Percent | Source code ... es, percent: local period)
$ perf annotate --percent-type hits-local --stdio | head -1
Percent | Source code ... es, percent: local hits)
$ perf annotate --percent-type hits-global --stdio | head -1
Percent | Source code ... es, percent: global hits)
$ perf annotate --percent-type period-global --stdio | head -1
Percent | Source code ... es, percent: global period)
The local/global keywords set if the percentage is computed in the scope
of the function (local) or the whole data (global).
The period/hits keywords set the base the percentage is computed on -
the samples period or the number of samples (hits).
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/20180804130521.11408-20-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In following patches we will allow to switch percent type even for stdio
annotation outputs. Adding the percent type value into the annotation
outputs title.
$ perf annotate --stdio
Percent | Sou ... instructions:u } (2805 samples, percent: local period)
--------------------------- ... ------------------------------------------------------
...
$ perf annotate --stdio2
Samples: 2K of events 'anon ... count (approx.): 156525487, [percent: local period]
safe_write.c() /usr/bin/yes
Percent
...
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/20180804130521.11408-19-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently we display the percentages in annotation output based on
number of samples hits. Switching it to period based percentage by
default, because it corresponds more to the time spent on the line.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/20180804130521.11408-18-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add new key bindings to toggle percent type/base in annotation UI browser:
'p' to switch between local and global percent type
'b' to switch between hits and perdio percent base
Add the following help messages to the UI browser '?' window:
...
p Toggle percent type [local/global]
b Toggle percent base [period/hits]
...
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/20180804130521.11408-17-jolsa@kernel.org
[ Moved percent_type to be the last arg to sym_title(), its an arg to what is being formmated (buf, size) ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Pass 'struct annotation_options' to map_symbol__annotation_dump(), to
carry on and pass the percent_type value.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/20180804130521.11408-15-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Pass struct annotation_options to symbol__calc_lines(), to carry on and
pass the percent_type value.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/20180804130521.11408-14-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
