Some CSI-2 transmitters will finish an ongoing frame whereas others will
not. Document that receiver drivers should not assume a particular
behaviour but to work in both cases.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Include the CEC pin framework documentation by reading cec-pin.h.
Include the CEC notifier framework documentation by reading cec-notifier.h.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Reviewed-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Document what this callback does.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Reviewed-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
A section talking about demod statistics implementation was
recently added, but it seemed to start from nowere, without
a previous description about how a demod driver would look
like.
Add such description, for completeness.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Instead of just start describing the kAPI functions, add
an introduction giving a general line about a DVB driver's
structure.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
It is not trivial to implement the logic that collects DVBv5
statistics. As we're seein lately too many implementations
that are not quite right when reviewing patchsets, add a
detailed explanation, adding a few examples about the right
thing to be done.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
A simpler variant of cec_transmit_done to be used where the HW does
just a single attempt at a transmit. So if the status indicates an
error, then the corresponding error count will always be 1 and this
function figures that out based on the status argument.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
This function simplifies the integration of CEC in DRM drivers.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Instead of including the V4L2 OF header in ReST documentation, use the
V4L2 fwnode header instead.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Hans Verkuil <hans.verkuil@cisco.com>
Tested-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Update the CSI-2 bus documentation to tell that the LP-11 mode is not
mandatory as there are transmitters that cannot be explicitly set to LP-11
mode. Instead, say that this what the transmitter drivers shall do if
possible.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Document the new cec_get_drvdata() helper function.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
The CEC documentation added two sections on the main media kAPI level.
There should be only one.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
The media_entity_pipeline_start() and media_entity_pipeline_stop()
functions are renamed as media_pipeline_start() and media_pipeline_stop(),
respectively. The reason is two-fold: the pipeline struct is, rightly,
already called media_pipeline (rather than media_entity_pipeline) and what
this really is about is a pipeline. A pipeline consists of entities ---
and, well, other objects embedded in these entities.
As the pipeline object will be in the future moved from entities to pads
in order to support multiple pipelines through a single entity, do the
renaming now.
Similarly, functions operating on struct media_entity_graph as well as the
struct itself are renamed by dropping the "entity_" part from the prefix
of the function family and the data structure. The graph traversal which
is what the functions are about is not specifically about entities only
and will operate on pads for the same reason as the media pipeline.
The patch has been generated using the following command:
git grep -l media_entity |xargs perl -i -pe '
s/media_entity_pipeline/media_pipeline/g;
s/media_entity_graph/media_graph/g'
And a few manual edits related to line start alignment and line wrapping.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
The cec_allocate_adapter function doesn't need the parent device, only the
cec_register_adapter function needs it.
Drop the cec_devnode parent field, since devnode.dev.parent can be used
instead.
This change makes the framework consistent with other frameworks where the
parent device is not used until the device is registered.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Document the interface between the CSI-2 transmitter and receiver drivers.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Somehow, two DVB headers were included twice. Remove the
duplication
Reported-by: Markus Heiser <markus.heiser@darmarit.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Improve the internal CEC documentation. In particular add a section
that specifies that transmit-related interrupts should be processed
before receive interrupts.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
As warned by linuxdoc[1] tool, using:
$ for i in $(git grep kernel-doc Documentation/media/kapi/|cut -d: -f4); do kernel-lintdoc --sloppy $i; done
include/media/v4l2-dev.h:118 :WARN: function name from comment differs: v4l2_prio_close <--> v4l2_prio_check
include/media/v4l2-mc.h:56 [kernel-doc WARN] : enum name from comment differs: if_vid_dec_index <--> if_vid_dec_pad_index
include/media/v4l2-mc.h:71 [kernel-doc WARN] : enum name from comment differs: if_aud_dec_index <--> if_aud_dec_pad_index
include/media/v4l2-mem2mem.h:396 [kernel-doc WARN] : function name from comment differs: v4l2_m2m_num_src_bufs_ready <--> v4l2_m2m_num_dst_bufs_ready
drivers/media/dvb-core/dvb_math.h:28 [kernel-doc WARN] : function name from comment differs: cintlog2 <--> intlog2
include/media/v4l2-subdev.h:215 [kernel-doc WARN] : struct name from comment differs: s_radio <--> v4l2_subdev_tuner_ops
include/media/v4l2-subdev.h:890 [kernel-doc WARN] : function name from comment differs: v4l2_set_subdevdata <--> v4l2_set_subdev_hostdata
include/media/v4l2-subdev.h:901 [kernel-doc WARN] : function name from comment differs: v4l2_get_subdevdata <--> v4l2_get_subdev_hostdata
drivers/media/dvb-core/dvb_ringbuffer.h:196 [kernel-doc WARN] : function name from comment differs: dvb_ringbuffer_writeuser <--> dvb_ringbuffer_write_user
include/media/videobuf2-core.h:399 [kernel-doc WARN] : struct name from comment differs: vb2_ops <--> vb2_buf_ops
include/media/media-entity.h:132 [kernel-doc ERROR] : duplicate parameter definition 'source'
include/media/media-entity.h:477 [kernel-doc WARN] : function name from comment differs: media_entity_enum_test <--> media_entity_enum_test_and_set
include/media/media-entity.h:535 [kernel-doc WARN] : function name from comment differs: gobj_to_entity <--> gobj_to_pad
include/media/media-entity.h:544 [kernel-doc WARN] : function name from comment differs: gobj_to_entity <--> gobj_to_link
include/media/media-entity.h:553 [kernel-doc WARN] : function name from comment differs: gobj_to_entity <--> gobj_to_intf
include/media/media-entity.h:562 [kernel-doc WARN] : function name from comment differs: gobj_to_entity <--> intf_to_devnode
include/media/rc-core.h:234 [kernel-doc WARN] : function name from comment differs: rc_open <--> rc_close
include/media/v4l2-ctrls.h:397 [kernel-doc WARN] : missing initial short description of 'v4l2_ctrl_handler_init'
include/media/v4l2-dev.h:118 [kernel-doc WARN] : function name from comment differs: v4l2_prio_close <--> v4l2_prio_check
include/media/v4l2-event.h:225 [kernel-doc WARN] : missing initial short description of 'v4l2_src_change_event_subscribe'
[1] https://return42.github.io/linuxdoc/linux.html
The above are real issues at the documentation. On several cases,
caused by cut-and-paste.
Fix them.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Instead of using c:type:`struct foo <foo>`, use:
struct c:type:`foo`
This patch was generated via this shell script:
for i in `find Documentation/media -type f`; do perl -ne 'if (m/\:c\:type\:\`struct\s+(\S+)\s*\<(\S+)\>\`/) { $s=$1; $r=$2; if ($s eq $r) { s/\:c\:type\:\`struct\s+(\S+)\s*\<(\S+)\>\`/struct :c:type:`$2`/; s/struct\s+struct/struct/; s/(struct\s+\:c\:type\:\`\S+\`)\s+structure/$1/; }} print $_' <$i >a && mv a $i; done
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
There are two warnings that are due to functions that has long
gone:
Documentation/media/kapi/v4l2-subdev.rst:417: WARNING: c:func reference target not found: v4l2_i2c_new_subdev_cfg
Documentation/media/kapi/v4l2-subdev.rst:436: WARNING: c:func reference target not found: v4l2_i2c_new_probed_subdev
Update the documentation to remove those.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
The "struct" were inside the reference, causing it to break.
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
instead of declaring the uAPI structs using usual refs, e. g.:
.. _foo-struct:
Use the C domain way:
.. c:type:: foo_struct
This way, the kAPI documentation can use cross-references to
point to the uAPI symbols.
That solves about ~100 undefined warnings like:
WARNING: c:type reference target not found: foo_struct
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
The cross-reference to "struct media_pad" was pointing to
a place that doesn't exist. Fix it, and adjust the second
reference on the same paragraph to use the same text.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Instead of keeping those notes at the file on a non-structured
way, move them to dtv-core.rst, using the proper ReST tags.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Some touch controllers send out touch data in a similar way to a
greyscale frame grabber.
Add new device type VFL_TYPE_TOUCH:
- This uses a new device prefix v4l-touch for these devices, to stop
generic capture software from treating them as webcams. Otherwise,
touch is treated similarly to video capture.
- Add V4L2_INPUT_TYPE_TOUCH
- Add MEDIA_INTF_T_V4L_TOUCH
- Add V4L2_CAP_TOUCH to indicate device is a touch device
Add formats:
- V4L2_TCH_FMT_DELTA_TD16 for signed 16-bit touch deltas
- V4L2_TCH_FMT_DELTA_TD08 for signed 16-bit touch deltas
- V4L2_TCH_FMT_TU16 for unsigned 16-bit touch data
- V4L2_TCH_FMT_TU08 for unsigned 8-bit touch data
This support will be used by:
- Atmel maXTouch (atmel_mxt_ts)
- Synaptics RMI4.
- sur40
Signed-off-by: Nick Dyer <nick@shmanahar.org>
Tested-by: Chris Healy <cphealy@gmail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Now that we have an override for the c domain that will do
the right thing for the Kernel, stop abusing on the cpp
domain.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
References at the rst files for C functions generated via
kernel-doc should use :c:func:.
Fix it.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Reorganize the order of the document, putting the chapters
on a more logical order and renaming some sections.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Now that the only remaining chapters at v4l2-framework are
the introduction ones, let' s rename the file.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Move the v4l2 clocks stuff from v4l2-framework to a separate
file and adds an attention that came from the v4l2-clk.h.
Note: as this is meant to be a temporary kAPI, and it is
used only by two drivers (soc_camera and em28xx), where
the first one is in deprecation process, it probably not
a worth effort to document its header.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Move the v4l2 event-specific text from v4l2-framework.rst
to v4l2-event.rst. That helps to keep the text together with
the functions it describes, and makes easier to identify
documentation gaps.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
As we merged the videobuf chapter at the kABI section, and it
is a way more complete, just remove the small videobuf chapter
that came from framework.txt.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Add cross-references for the functions/structs and add
the markup tags to improve its display.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Add documentation for v4l2-dev.h, and put it at v4l2-framework.rst,
where struct video_device is currently documented.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
There are some subdev-specific functions at v4l2-common.h
that are mentioned at v4l2-subdev.rst.
Document them.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
The two new sections were missing cross-references, and had
some other minor issues with the markups. Add such things.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
There are two additional subdev-specific sections at the
v4l2-framework file. Move them to the subdev chapter, in order
to better organize the book.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
