Christoph Hellwig <hch@lst.de> says:
Hi all,
this series converts the SCSI midlayer and LLDDs to use atomic queue
limits API. It is pretty straight forward, except for the mpt3mr
driver which does really weird and probably already broken things by
setting limits from unlocked device iteration callbacks.
I will probably defer the (more complicated) ULD changes to the next
merge window as they would heavily conflict with Damien's zone write
plugging series. With that the series could go in through the SCSI
tree if Jens' ACKs the core block layer bits.
Link: https://lore.kernel.org/r/20240409143748.980206-1-hch@lst.de
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
UFS spec version 2.1 was published more than 10 years ago. It is
vanishingly unlikely that even there are out there platforms that uses
earlier host controllers, let alone that those ancient platforms will ever
run a V6.10 kernel. To be extra cautious, leave out removal of UFSHCI 2.0
support from this patch, and just remove support of host controllers prior
to UFS2.0.
This patch removes some legacy tuning calls that no longer apply.
Signed-off-by: Avri Altman <avri.altman@wdc.com>
Link: https://lore.kernel.org/r/20240410183720.908-2-avri.altman@wdc.com
Acked-by: Bean Huo <beanhuo@micron.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Use the SCSI host's dma_alignment field and set it in ->init and remove the
now unused config_scsi_dev method.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20240409143748.980206-9-hch@lst.de
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Avri Altman <avri.altman@wdc.com> says:
Device management commands are constructed for query commands that are
being issued by the driver, but also for raw device management
commands originated by the bsg module, and recently, by the advanced
rpmb handler. Thus, the same code fragments, e.g. locking, composing
the command, composing the upiu etc., appear over and over. Remove
those duplications. Theoretically, there should be no functional
change.
Link: https://lore.kernel.org/r/20240309081104.5006-1-avri.altman@wdc.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Move some code fragments into ufshcd_prepare_req_desc_hdr() so it can be
used throughout.
Signed-off-by: Avri Altman <avri.altman@wdc.com>
Link: https://lore.kernel.org/r/20240309081104.5006-5-avri.altman@wdc.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Instead of hardcoding the register field, add the proper definition. While
at it, let's also use ufshcd_rmwl() to simplify updating this register.
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Signed-off-by: ChanWoo Lee <cw9316.lee@samsung.com>
Link: https://lore.kernel.org/r/20240102014222.23351-1-cw9316.lee@samsung.com
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Register UFS driver to CPU latency PM QoS framework to improve UFS device
random I/O performance.
PM QoS initialization will insert new QoS request into the CPU latency QoS
list with the maximum latency PM_QOS_DEFAULT_VALUE value.
The UFS driver will vote for performance mode on scale up and power save
mode for scale down.
If clock scaling feature is not enabled then voting will be based on clock
on or off condition. Also provide a sysfs interface to enable/disable PM
QoS feature.
tiotest benchmark tool I/O performance results on sm8550 platform:
1. Without PM QoS support
Type (Speed in) | Average of 18 iterations
Random Write(IPOS) | 41065.13
Random Read(IPOS) | 37101.3
2. With PM QoS support
Type (Speed in) | Average of 18 iterations
Random Write(IPOS) | 46784.9
Random Read(IPOS) | 42943.4
(Improvement with PM QoS = ~15%).
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Co-developed-by: Nitin Rawat <quic_nitirawa@quicinc.com>
Signed-off-by: Nitin Rawat <quic_nitirawa@quicinc.com>
Co-developed-by: Naveen Kumar Goud Arepalli <quic_narepall@quicinc.com>
Signed-off-by: Naveen Kumar Goud Arepalli <quic_narepall@quicinc.com>
Signed-off-by: Maramaina Naresh <quic_mnaresh@quicinc.com>
Link: https://lore.kernel.org/r/20231219123706.6463-2-quic_mnaresh@quicinc.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Rename ufshcd_auto_hibern8_enable() into ufshcd_configure_auto_hibern8()
since this function can enable or disable auto-hibernation. Since
ufshcd_auto_hibern8_enable() is only used inside the UFSHCI driver core,
declare it static. Additionally, move the definition of this function to
just before its first caller.
Suggested-by: Bao D. Nguyen <quic_nguyenb@quicinc.com>
Reviewed-by: Bao D. Nguyen <quic_nguyenb@quicinc.com>
Reviewed-by: Can Guo <quic_cang@quicinc.com>
Cc: Avri Altman <avri.altman@wdc.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20231214192416.3638077-2-bvanassche@acm.org
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Bean Huo <beanhuo@iokpp.de> says:
Adding RTC support for embedded storage device UFS in its driver, it
is important for a few key reasons:
1. Helps with Regular Maintenance:
The RTC provides a basic way to keep track of time, making it useful for
scheduling routine maintenance tasks in the storage device. This includes
things like making sure data is spread
evenly across the storage to extend its life.
2. Figuring Out How Old Data Is:
The RTC helps the device estimate how long ago certain parts of the storage
were last used. This is handy for deciding when to do maintenance tasks to
keep the storage working well over time.
3. Making Devices Last Longer:
By using the RTC for regular upkeep, we can make sure the storage device lasts
longer and stays reliable. This is especially important for devices that need
to work well for a long time.
4.Fitting In with Other Devices:
The inclusion of RTC support aligns with existing UFS specifications (starting
from UFS Spec 2.0) and is consistent with the prevalent industry practice. Many
UFS devices currently on the market utilize RTC for internal timekeeping. By
ensuring compatibility with this widely adopted standard, the embedded storage
device becomes seamlessly integrable with existing hardware and software
ecosystems, reducing the risk of compatibility issues.
In short, adding RTC support to embedded storage device UFS helps with regular
upkeep, extends the device's life, ensures compatibility, and keeps everything
running smoothly with the rest of the system.
Link: https://lore.kernel.org/r/20231212220825.85255-1-beanhuo@iokpp.de
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Introduce a sysfs node named 'rtc_update_ms' within the kernel, enabling
user to adjust the RTC periodic update frequency to suit the specific
requirements of the system and UFS. Also, this patch allows the user to
disable/enable periodic update RTC in the UFS idle time.
Signed-off-by: Bean Huo <beanhuo@micron.com>
Link: https://lore.kernel.org/r/20231212220825.85255-4-beanhuo@iokpp.de
Acked-by: Avri Altman <avri.altman@wdc.com>
Reviewed-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Add Real Time Clock (RTC) support for UFS device. This enhancement is
crucial for the internal maintenance operations of the UFS device. The
patch enables the device to handle both absolute and relative time
information. Furthermore, it includes periodic task to update the RTC in
accordance with the UFS Spec, ensuring the accuracy of RTC information for
the device's internal processes.
RTC and qTimestamp serve distinct purposes. The RTC provides a coarse level
of granularity with, at best, approximate single-second resolution. This
makes the RTC well-suited for the device to determine the approximate age
of programmed blocks after being updated by the host. On the other hand,
qTimestamp offers nanosecond granularity and is specifically designed for
synchronizing Device Error Log entries with corresponding host-side logs.
Given that the RTC has been a standard feature since UFS Spec 2.0, and
qTimestamp was introduced in UFS Spec 4.0, the majority of UFS devices
currently on the market rely on RTC. Therefore, it is advisable to continue
supporting RTC in the Linux kernel. This ensures compatibility with the
prevailing UFS device implementations and facilitates seamless integration
with existing hardware. By maintaining support for RTC, we ensure broad
compatibility and avoid potential issues arising from deviations in device
specifications across different UFS versions.
Signed-off-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Mike Bi <mikebi@micron.com>
Signed-off-by: Luca Porzio <lporzio@micron.com>
Link: https://lore.kernel.org/r/20231212220825.85255-3-beanhuo@iokpp.de
Acked-by: Avri Altman <avri.altman@wdc.com>
Reviewed-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> says:
Hello,
This series has code some cleanups to the Qcom UFS driver. No
functional change. In this version, I've removed code supporting
legacy controllers ver < 2.0, as the respective platforms were never
supported in upstream.
Tested on: RB5 development board based on Qcom SM8250 SoC.
Link: https://lore.kernel.org/r/20231208065902.11006-1-manivannan.sadhasivam@linaro.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Instead of duplicating the enable/disable IRQ part, let's export the
helpers available in ufshcd driver and make use of them. This also fixes
the possible redundant IRQ disable before asserting reset (when IRQ was
already disabled).
Fixes: 4a791574a0 ("scsi: ufs: ufs-qcom: Disable interrupt in reset path")
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20231208065902.11006-7-manivannan.sadhasivam@linaro.org
Tested-by: Andrew Halaney <ahalaney@redhat.com> # sa8775p-ride
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The UFS driver has two driver-specific fault injection mechanisms
(trigger_eh and timeout). Each fault injection configuration can only be
specified by a module parameter and cannot be reconfigured without
reloading the driver. Also, each configuration is common to all HBAs.
This change adds the following subdirectories for each UFS HBA when
debugfs is enabled:
/sys/kernel/debug/ufshcd/<HBA>/timeout_inject
/sys/kernel/debug/ufshcd/<HBA>/trigger_eh_inject
Each fault injection attribute can be dynamically set per HBA by a
corresponding file in these directories.
This is tested with QEMU UFS devices.
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Link: https://lore.kernel.org/r/20231118124443.1007116-1-akinobu.mita@gmail.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Having UFS power info available in sysfs makes it easier to tell the state
of the link during runtime considering we have a bunch of power saving
features and various combinations for backward compatibility.
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Bean Huo <beanhuo@micron.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Can Guo <quic_cang@quicinc.com>
Link: https://lore.kernel.org/r/1698890324-7374-1-git-send-email-quic_cang@quicinc.com
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
OPP framework can be used to scale the clocks along with other entities
such as regulators, performance state etc... So let's add support for
parsing OPP from devicetree. OPP support in devicetree is added through the
"operating-points-v2" property which accepts the OPP table defining clock
frequency, regulator voltage, power domain performance state etc...
Since the UFS controller requires multiple clocks to be controlled for
proper working, devm_pm_opp_set_config() has been used which supports
scaling multiple clocks through custom ufshcd_opp_config_clks() callback.
It should be noted that the OPP support is not compatible with the old
"freq-table-hz" property. So only one can be used at a time even though
the UFS core supports both.
Co-developed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20231012172129.65172-4-manivannan.sadhasivam@linaro.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
UFS core is only scaling the clocks during devfreq scaling and
initialization. But for an optimum power saving, regulators should also be
scaled along with the clocks.
So let's use the OPP framework which supports scaling clocks, regulators,
and performance state using OPP table defined in devicetree. For
accomodating the OPP support, the existing APIs (ufshcd_scale_clks,
ufshcd_is_devfreq_scaling_required and ufshcd_devfreq_scale) are modified
to accept "freq" as an argument which in turn used by the OPP helpers.
The OPP support is added along with the old freq-table based clock scaling
so that the existing platforms work as expected.
Co-developed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20231012172129.65172-3-manivannan.sadhasivam@linaro.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Make the UFS device execute realtime (RT) requests before other requests.
This will be used in Android to reduce the I/O latency of the foreground
app.
Note: UFS devices do not support CDL so using CDL is not a viable
alternative.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20230921192335.676924-5-bvanassche@acm.org
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The DMA alignment for the Exynos controller follows directly from the PRDT
segment size configured in ufs-exynos.c. Hence, move the DMA alignment code
into the Exynos driver source code.
Cc: Alim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20230921192335.676924-3-bvanassche@acm.org
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Tested-by: Alim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Export ufshcd_is_hba_active() to allow driver modules to check the state of
the host controller.
Signed-off-by: Nitin Rawat <quic_nitirawa@quicinc.com>
Link: https://lore.kernel.org/r/20230726134140.7180-2-quic_nitirawa@quicinc.com
Acked-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Bart Van Assche <bvanassche@acm.org> says:
Hi Martin,
This patch includes the following changes, none of which should change the
functionality of the UFS host controller driver:
- Improve the kernel-doc headers further.
- Fix multiple W=2 compiler warnings.
- Simplify ufshcd_abort_all().
- Simplify the code for creating and parsing UFS Transport Protocol (UTP)
headers.
Please consider this patch series for the next merge window.
Thanks,
Bart.
Link: https://lore.kernel.org/r/20230727194457.3152309-1-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Make the code that parses UTP transfer request headers easier to read by
using u8 instead of __be32 where appropriate.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20230727194457.3152309-13-bvanassche@acm.org
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Make the code that initializes UTP transfer request headers easier to read
by using bitfields instead of __le32 where appropriate.
Cc: "Bao D. Nguyen" <quic_nguyenb@quicinc.com>
Cc: Eric Biggers <ebiggers@google.com>
Cc: Avri Altman <avri.altman@wdc.com>
Cc: Bean Huo <beanhuo@micron.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20230727194457.3152309-12-bvanassche@acm.org
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Remove the 'response' member variable because no code reads its value.
Additionally, move the ufs_query_req and ufs_query_res data structure
definitions into include/ufs/ufshcd.h because these data structures are
related to the UFS host controller driver.
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20230727194457.3152309-11-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Assign names to the enumeration types for UPIU types. Use these enumeration
types where appropriate.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20230727194457.3152309-8-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Only #include those header files that are needed.
Note: include/ufs/ufshcd.h needs <scsi/scsi_host.h> because of SG_ALL.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20230727194457.3152309-6-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Since there are enums available for UFS gears, let's add enums for lanes as
well to maintain uniformity.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20230731145020.41262-2-manivannan.sadhasivam@linaro.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Only call scsi_set_resid() in case of an underflow. Do not call
scsi_set_resid() in case of an overflow.
Cc: Avri Altman <avri.altman@wdc.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Fixes: cb38845d90 ("scsi: ufs: core: Set the residual byte count")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20230724200843.3376570-2-bvanassche@acm.org
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Interest among UFS users in HPB has reduced significantly. I am not aware
of any current users of the HPB functionality. Hence remove HPB support
from the kernel.
A note: the work in JEDEC on a successor for HPB is nearing completion.
Zoned storage for UFS or ZUFS combines the UFS standard with ZBC-2.
Acked-by: Avri Altman <avri.altman@wdc.com>
Reviewed-by: Bean Huo <beanhuo@micron.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: ChanWoo Lee <cw9316.lee@samsung.com>
Cc: Daejun Park <daejun7.park@samsung.com>
Cc: Keoseong Park <keosung.park@samsung.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20230719165758.2787573-1-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Export symbols for MediaTek UFS driver's PM flow and IRQ handler.
Signed-off-by: Po-Wen Kao <powen.kao@mediatek.com>
Link: https://lore.kernel.org/r/20230701124442.10489-2-powen.kao@mediatek.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This change reduces the number of parentheses that are required in the
definition of this function and also when using this function.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20230706215054.4113469-1-bvanassche@acm.org
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The new qTimestamp attribute was added to UFS 4.0 spec, in order to
synchronize timestamp between device logs and the host. The spec recommends
to send this attribute upon device power-on Reset/HW reset or when
switching to Active state (using SSU command). Due to this attribute, the
attribute's max value was extended to 8 bytes. As a result, the new
definition of struct utp_upiu_query_v4_0 was added.
Signed-off-by: Arthur Simchaev <Arthur.Simchaev@wdc.com>
-----------------
Changes to v2:
- Adressed Bart's comments
- Add missed response variable to ufshcd_set_timestamp_attr
Link: https://lore.kernel.org/r/20230626103320.8737-1-arthur.simchaev@wdc.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Updates to the usual drivers (ufs, pm80xx, libata-scsi, smartpqi,
lpfc, qla2xxx). We have a couple of major core changes impacting
other systems: Command Duration Limits, which spills into block and
ATA and block level Persistent Reservation Operations, which touches
block, nvme, target and dm (both of which are added with merge commits
containing a cover letter explaining what's going on).
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCZJ19cSYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishfZpAQCQBuWR
ELcOhsaG5KzO6xLWcH8mjsOoxffKvazZjTKXlAD5ATEv7++E250oKS3t+yfjae5I
Lc195MlDju85ItUQgfk=
=U9ik
-----END PGP SIGNATURE-----
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI updates from James Bottomley:
"Updates to the usual drivers (ufs, pm80xx, libata-scsi, smartpqi,
lpfc, qla2xxx).
We have a couple of major core changes impacting other systems:
- Command Duration Limits, which spills into block and ATA
- block level Persistent Reservation Operations, which touches block,
nvme, target and dm
Both of these are added with merge commits containing a cover letter
explaining what's going on"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (187 commits)
scsi: core: Improve warning message in scsi_device_block()
scsi: core: Replace scsi_target_block() with scsi_block_targets()
scsi: core: Don't wait for quiesce in scsi_device_block()
scsi: core: Don't wait for quiesce in scsi_stop_queue()
scsi: core: Merge scsi_internal_device_block() and device_block()
scsi: sg: Increase number of devices
scsi: bsg: Increase number of devices
scsi: qla2xxx: Remove unused nvme_ls_waitq wait queue
scsi: ufs: ufs-pci: Add support for Intel Arrow Lake
scsi: sd: sd_zbc: Use PAGE_SECTORS_SHIFT
scsi: ufs: wb: Add explicit flush_threshold sysfs attribute
scsi: ufs: ufs-qcom: Switch to the new ICE API
scsi: ufs: dt-bindings: qcom: Add ICE phandle
scsi: ufs: ufs-mediatek: Set UFSHCD_QUIRK_MCQ_BROKEN_RTC quirk
scsi: ufs: ufs-mediatek: Set UFSHCD_QUIRK_MCQ_BROKEN_INTR quirk
scsi: ufs: core: Add host quirk UFSHCD_QUIRK_MCQ_BROKEN_RTC
scsi: ufs: core: Add host quirk UFSHCD_QUIRK_MCQ_BROKEN_INTR
scsi: ufs: core: Remove dedicated hwq for dev command
scsi: ufs: core: mcq: Fix the incorrect OCS value for the device command
scsi: ufs: dt-bindings: samsung,exynos: Drop unneeded quotes
...
Some hosts do not implement SQ Run Time Command (SQRTC) register, thus we
need this quirk to skip the related flow.
Signed-off-by: Po-Wen Kao <powen.kao@mediatek.com>
Link: https://lore.kernel.org/r/20230612085817.12275-3-powen.kao@mediatek.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Quirk UFSHCD_QUIRK_MCQ_BROKEN_INTR is introduced for hosts that implement a
different interrupt topology from the UFSHCI 4.0 spec. Some hosts raise
per hw queue interrupt in addition to CQES (traditional) when ESI is
disabled.
Enabling this quirk will disable CQES and use only per hw queue interrupt.
Signed-off-by: Po-Wen Kao <powen.kao@mediatek.com>
Link: https://lore.kernel.org/r/20230612085817.12275-2-powen.kao@mediatek.com
Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
In MCQ mode, when a device command uses a hardware queue shared with other
commands, a race condition may occur in the following scenario:
1. A device command is completed in CQx with CQE entry "e".
2. The interrupt handler copies the "cqe" pointer to "hba->dev_cmd.cqe"
and completes "hba->dev_cmd.complete".
3. The "ufshcd_wait_for_dev_cmd()" function is awakened and retrieves the
OCS value from "hba->dev_cmd.cqe".
However, there is a possibility that the CQE entry "e" will be overwritten
by newly completed commands in CQx, resulting in an incorrect OCS value
being received by "ufshcd_wait_for_dev_cmd()".
To avoid this race condition, the OCS value should be immediately copied to
the struct "lrb" of the device command. Then "ufshcd_wait_for_dev_cmd()"
can retrieve the OCS value from the struct "lrb".
Fixes: 57b1c0ef89 ("scsi: ufs: core: mcq: Add support to allocate multiple queues")
Suggested-by: Can Guo <quic_cang@quicinc.com>
Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Link: https://lore.kernel.org/r/20230610021553.1213-2-powen.kao@mediatek.com
Tested-by: Po-Wen Kao <powen.kao@mediatek.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
All UFS host drivers call ufshcd_shutdown(). Hence, instead of calling
ufshcd_shutdown() from the host driver .shutdown() callback, inline that
function into ufshcd_wl_shutdown().
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20230524203659.1394307-5-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
In preparation for adding MCQ error handler support, update the MCQ code to
use the ufshcd_mcq_poll_cqe_lock() in interrupt context instead of using
ufshcd_mcq_poll_cqe_nolock(). This is to keep synchronization between MCQ
interrupt and error handler contexts because both need to access the MCQ
hardware in separate contexts.
Signed-off-by: Bao D. Nguyen <quic_nguyenb@quicinc.com>
Link: https://lore.kernel.org/r/6ae727ad2a4040469b8f0632b55e0577d80da11b.1685396241.git.quic_nguyenb@quicinc.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Tested-by: Stanley Chu <stanley.chu@mediatek.com>
Reviewed-by: Can Guo <quic_cang@quicinc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Add supporting functions to handle UFS abort in MCQ mode.
Signed-off-by: Bao D. Nguyen <quic_nguyenb@quicinc.com>
Link: https://lore.kernel.org/r/d452c5ad62dc863cc067ec82daa0885ec98bd508.1685396241.git.quic_nguyenb@quicinc.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Tested-by: Stanley Chu <stanley.chu@mediatek.com>
Reviewed-by: Can Guo <quic_cang@quicinc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The UTP command descriptor base address is a 57-bit field in the UTP
transfer request descriptor. Combine the two 32-bit
command_desc_base_addr_lo/hi fields into a 64-bit for better handling of
this field.
Signed-off-by: Bao D. Nguyen <quic_nguyenb@quicinc.com>
Link: https://lore.kernel.org/r/4e6f7f5a15000cdae77c3014b477264f57bf572c.1685396241.git.quic_nguyenb@quicinc.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Tested-by: Stanley Chu <stanley.chu@mediatek.com>
Reviewed-by: Can Guo <quic_cang@quicinc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Do not open code SZ_x.
Signed-off-by: Avri Altman <avri.altman@wdc.com>
Link: https://lore.kernel.org/r/20230531070009.4593-1-avri.altman@wdc.com
Reviewed-by: Bean Huo <beanhuo@micron.com>
Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Reviewed-by: Keoseong Park <keosung.park@samsung.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Ungating the clock asynchronously causes ufshcd_queuecommand() to return
SCSI_MLQUEUE_HOST_BUSY and hence causes commands to be requeued. This is
suboptimal. Allow ufshcd_queuecommand() to sleep such that clock ungating
does not trigger command requeuing. Remove the ufshcd_scsi_block_requests()
and ufshcd_scsi_unblock_requests() calls because these are no longer
needed. The flush_work(&hba->clk_gating.ungate_work) call is sufficient to
make the SCSI core wait for clock ungating to complete.
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20230529202640.11883-6-bvanassche@acm.org
Reviewed-by: Bean Huo <beanhuo@micron.com>
Reviewed-by: Bao D. Nguyen <quic_nguyenb@quicinc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Naming the functions after standard operators like sizeof() may cause
confusion. Rename it to ufshcd_get_ucd_size().
Signed-off-by: Po-Wen Kao <powen.kao@mediatek.com>
Link: https://lore.kernel.org/r/20230504154454.26654-3-powen.kao@mediatek.com
Suggested-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Reviewed-by: Ziqi Chen <quic_ziqichen@quicinc.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Updates to the usual drivers (megaraid_sas, scsi_debug, lpfc, target,
mpi3mr, hisi_sas, arcmsr). The major core change is the
constification of the host templates (which touches everything) along
with other minor fixups and clean ups.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCZEmJACYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishU4FAP0WYhFC
rkbY203/+ErUuwvOKum0VwJKUowCaUD0MBwScAD+Ok/NWobmjdXUBbPUbvVkr+hE
8B/xs9hodX+1fVJcVG0=
=fS/j
-----END PGP SIGNATURE-----
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI updates from James Bottomley:
"Updates to the usual drivers (megaraid_sas, scsi_debug, lpfc, target,
mpi3mr, hisi_sas, arcmsr).
The major core change is the constification of the host templates
(which touches everything) along with other minor fixups and clean
ups"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (207 commits)
scsi: ufs: mcq: Use pointer arithmetic in ufshcd_send_command()
scsi: ufs: mcq: Annotate ufshcd_inc_sq_tail() appropriately
scsi: cxlflash: s/semahpore/semaphore/
scsi: lpfc: Silence an incorrect device output
scsi: mpi3mr: Use IRQ save variants of spinlock to protect chain frame allocation
scsi: scsi_debug: Fix missing error code in scsi_debug_init()
scsi: hisi_sas: Work around build failure in suspend function
scsi: lpfc: Fix ioremap issues in lpfc_sli4_pci_mem_setup()
scsi: mpt3sas: Fix an issue when driver is being removed
scsi: mpt3sas: Remove HBA BIOS version in the kernel log
scsi: target: core: Fix invalid memory access
scsi: scsi_debug: Drop sdebug_queue
scsi: scsi_debug: Only allow sdebug_max_queue be modified when no shosts
scsi: scsi_debug: Use scsi_host_busy() in delay_store() and ndelay_store()
scsi: scsi_debug: Use blk_mq_tagset_busy_iter() in stop_all_queued()
scsi: scsi_debug: Use blk_mq_tagset_busy_iter() in sdebug_blk_mq_poll()
scsi: scsi_debug: Dynamically allocate sdebug_queued_cmd
scsi: scsi_debug: Use scsi_block_requests() to block queues
scsi: scsi_debug: Protect block_unblock_all_queues() with mutex
scsi: scsi_debug: Change shost list lock to a mutex
...
